Merge branch 'master' into for-davem

Conflicts:
	drivers/net/wireless/iwlwifi/iwl-testmode.c
	net/wireless/nl80211.c

2 files changed, 55 insertions, 18 deletions

diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h
index 210e2c325534..db84e2f6b289 100644
--- a/include/linux/ieee80211.h
+++ b/include/linux/ieee80211.h
@@ -640,9 +640,9 @@ struct ieee80211_rann_ie {
 	u8 rann_hopcount;
 	u8 rann_ttl;
 	u8 rann_addr[6];
-	u32 rann_seq;
-	u32 rann_interval;
-	u32 rann_metric;
+	__le32 rann_seq;
+	__le32 rann_interval;
+	__le32 rann_metric;
 } __attribute__ ((packed));
 
 enum ieee80211_rann_flags {
@@ -1007,13 +1007,13 @@ enum ieee80211_min_mpdu_spacing {
 };
 
 /**
- * struct ieee80211_ht_info - HT information
+ * struct ieee80211_ht_operation - HT operation IE
  *
- * This structure is the "HT information element" as
- * described in 802.11n D5.0 7.3.2.58
+ * This structure is the "HT operation element" as
+ * described in 802.11n-2009 7.3.2.57
  */
-struct ieee80211_ht_info {
-	u8 control_chan;
+struct ieee80211_ht_operation {
+	u8 primary_chan;
 	u8 ht_param;
 	__le16 operation_mode;
 	__le16 stbc_param;
@@ -1027,8 +1027,6 @@ struct ieee80211_ht_info {
 #define		IEEE80211_HT_PARAM_CHA_SEC_BELOW	0x03
 #define IEEE80211_HT_PARAM_CHAN_WIDTH_ANY		0x04
 #define IEEE80211_HT_PARAM_RIFS_MODE			0x08
-#define IEEE80211_HT_PARAM_SPSMP_SUPPORT		0x10
-#define IEEE80211_HT_PARAM_SERV_INTERVAL_GRAN		0xE0
 
 /* for operation_mode */
 #define IEEE80211_HT_OP_MODE_PROTECTION			0x0003
@@ -1301,7 +1299,7 @@ enum ieee80211_eid {
 	WLAN_EID_EXT_SUPP_RATES = 50,
 
 	WLAN_EID_HT_CAPABILITY = 45,
-	WLAN_EID_HT_INFORMATION = 61,
+	WLAN_EID_HT_OPERATION = 61,
 
 	WLAN_EID_RSN = 48,
 	WLAN_EID_MMIE = 76,
@@ -1441,6 +1439,18 @@ enum ieee80211_tdls_actioncode {
 #define WLAN_TDLS_SNAP_RFTYPE	0x2
 
 /**
+ * enum - mesh synchronization method identifier
+ *
+ * @IEEE80211_SYNC_METHOD_NEIGHBOR_OFFSET: the default synchronization method
+ * @IEEE80211_SYNC_METHOD_VENDOR: a vendor specific synchronization method
+ * that will be specified in a vendor specific information element
+ */
+enum {
+	IEEE80211_SYNC_METHOD_NEIGHBOR_OFFSET = 1,
+	IEEE80211_SYNC_METHOD_VENDOR = 255,
+};
+
+/**
  * enum - mesh path selection protocol identifier
  *
  * @IEEE80211_PATH_PROTOCOL_HWMP: the default path selection protocol
diff --git a/include/linux/nl80211.h b/include/linux/nl80211.h
index e474f6e780cc..1335084b1c69 100644
--- a/include/linux/nl80211.h
+++ b/include/linux/nl80211.h
@@ -548,6 +548,11 @@
  * @NL80211_CMD_SET_NOACK_MAP: sets a bitmap for the individual TIDs whether
  *      No Acknowledgement Policy should be applied.
  *
+ * @NL80211_CMD_CH_SWITCH_NOTIFY: An AP or GO may decide to switch channels
+ *	independently of the userspace SME, send this event indicating
+ *	%NL80211_ATTR_IFINDEX is now on %NL80211_ATTR_WIPHY_FREQ with
+ *	%NL80211_ATTR_WIPHY_CHANNEL_TYPE.
+ *
  * @NL80211_CMD_MAX: highest used command number
  * @__NL80211_CMD_AFTER_LAST: internal use
  */
@@ -689,6 +694,8 @@ enum nl80211_commands {
 
 	NL80211_CMD_SET_NOACK_MAP,
 
+	NL80211_CMD_CH_SWITCH_NOTIFY,
+
 	/* add new commands above here */
 
 	/* used to define NL80211_CMD_MAX below */
@@ -1685,6 +1692,7 @@ enum nl80211_sta_bss_param {
  * @NL80211_STA_INFO_CONNECTED_TIME: time since the station is last connected
  * @NL80211_STA_INFO_STA_FLAGS: Contains a struct nl80211_sta_flag_update.
  * @NL80211_STA_INFO_BEACON_LOSS: count of times beacon loss was detected (u32)
+ * @NL80211_STA_INFO_T_OFFSET: timing offset with respect to this STA (s64)
  * @__NL80211_STA_INFO_AFTER_LAST: internal
  * @NL80211_STA_INFO_MAX: highest possible station info attribute
  */
@@ -1708,6 +1716,7 @@ enum nl80211_sta_info {
 	NL80211_STA_INFO_CONNECTED_TIME,
 	NL80211_STA_INFO_STA_FLAGS,
 	NL80211_STA_INFO_BEACON_LOSS,
+	NL80211_STA_INFO_T_OFFSET,
 
 	/* keep last */
 	__NL80211_STA_INFO_AFTER_LAST,
@@ -2142,6 +2151,9 @@ enum nl80211_mntr_flags {
  *
  * @NL80211_MESHCONF_ATTR_MAX: highest possible mesh configuration attribute
  *
+ * @NL80211_MESHCONF_SYNC_OFFSET_MAX_NEIGHBOR: maximum number of neighbors
+ * to synchronize to for 11s default synchronization method (see 11C.12.2.2)
+ *
  * @__NL80211_MESHCONF_ATTR_AFTER_LAST: internal use
  */
 enum nl80211_meshconf_params {
@@ -2166,6 +2178,7 @@ enum nl80211_meshconf_params {
 	NL80211_MESHCONF_HWMP_PERR_MIN_INTERVAL,
 	NL80211_MESHCONF_FORWARDING,
 	NL80211_MESHCONF_RSSI_THRESHOLD,
+	NL80211_MESHCONF_SYNC_OFFSET_MAX_NEIGHBOR,
 
 	/* keep last */
 	__NL80211_MESHCONF_ATTR_AFTER_LAST,
@@ -2205,6 +2218,11 @@ enum nl80211_meshconf_params {
  * complete (unsecured) mesh peering without the need of a userspace daemon.
  *
  * @NL80211_MESH_SETUP_ATTR_MAX: highest possible mesh setup attribute number
+ *
+ * @NL80211_MESH_SETUP_ENABLE_VENDOR_SYNC: Enable this option to use a
+ * vendor specific synchronization method or disable it to use the default
+ * neighbor offset synchronization
+ *
  * @__NL80211_MESH_SETUP_ATTR_AFTER_LAST: Internal use
  */
 enum nl80211_mesh_setup_params {
@@ -2214,6 +2232,7 @@ enum nl80211_mesh_setup_params {
 	NL80211_MESH_SETUP_IE,
 	NL80211_MESH_SETUP_USERSPACE_AUTH,
 	NL80211_MESH_SETUP_USERSPACE_AMPE,
+	NL80211_MESH_SETUP_ENABLE_VENDOR_SYNC,
 
 	/* keep last */
 	__NL80211_MESH_SETUP_ATTR_AFTER_LAST,
@@ -2223,7 +2242,7 @@ enum nl80211_mesh_setup_params {
 /**
  * enum nl80211_txq_attr - TX queue parameter attributes
  * @__NL80211_TXQ_ATTR_INVALID: Attribute number 0 is reserved
- * @NL80211_TXQ_ATTR_QUEUE: TX queue identifier (NL80211_TXQ_Q_*)
+ * @NL80211_TXQ_ATTR_AC: AC identifier (NL80211_AC_*)
  * @NL80211_TXQ_ATTR_TXOP: Maximum burst time in units of 32 usecs, 0 meaning
  *	disabled
  * @NL80211_TXQ_ATTR_CWMIN: Minimum contention window [a value of the form
@@ -2236,7 +2255,7 @@ enum nl80211_mesh_setup_params {
  */
 enum nl80211_txq_attr {
 	__NL80211_TXQ_ATTR_INVALID,
-	NL80211_TXQ_ATTR_QUEUE,
+	NL80211_TXQ_ATTR_AC,
 	NL80211_TXQ_ATTR_TXOP,
 	NL80211_TXQ_ATTR_CWMIN,
 	NL80211_TXQ_ATTR_CWMAX,
@@ -2247,13 +2266,21 @@ enum nl80211_txq_attr {
 	NL80211_TXQ_ATTR_MAX = __NL80211_TXQ_ATTR_AFTER_LAST - 1
 };
 
-enum nl80211_txq_q {
-	NL80211_TXQ_Q_VO,
-	NL80211_TXQ_Q_VI,
-	NL80211_TXQ_Q_BE,
-	NL80211_TXQ_Q_BK
+enum nl80211_ac {
+	NL80211_AC_VO,
+	NL80211_AC_VI,
+	NL80211_AC_BE,
+	NL80211_AC_BK,
+	NL80211_NUM_ACS
 };
 
+/* backward compat */
+#define NL80211_TXQ_ATTR_QUEUE	NL80211_TXQ_ATTR_AC
+#define NL80211_TXQ_Q_VO	NL80211_AC_VO
+#define NL80211_TXQ_Q_VI	NL80211_AC_VI
+#define NL80211_TXQ_Q_BE	NL80211_AC_BE
+#define NL80211_TXQ_Q_BK	NL80211_AC_BK
+
 enum nl80211_channel_type {
 	NL80211_CHAN_NO_HT,
 	NL80211_CHAN_HT20,