Merge tag 'isci-for-3.5' into misc

isci update for 3.5

1/ Rework remote-node-context (RNC) handling for proper management of
   the silicon state machine in error handling and hot-plug conditions.
   Further details below, suffice to say if the RNC is mismanaged the
   silicon state machines may lock up.

2/ Refactor the initialization code to be reused for suspend/resume support

3/ Miscellaneous bug fixes to address discovery issues and hardware
   compatibility.

RNC rework details from Jeff Skirvin:

In the controller, devices as they appear on a SAS domain (or
direct-attached SATA devices) are represented by memory structures known
as "Remote Node Contexts" (RNCs).  These structures are transferred from
main memory to the controller using a set of register commands; these
commands include setting up the context ("posting"), removing the
context ("invalidating"), and commands to control the scheduling of
commands and connections to that remote device ("suspensions" and
"resumptions").  There is a similar path to control RNC scheduling from
the protocol engine, which interprets the results of command and data
transmission and reception.

In general, the controller chooses among non-suspended RNCs to find one
that has work requiring scheduling the transmission of command and data
frames to a target.  Likewise, when a target tries to return data back
to the initiator, the state of the RNC is used by the controller to
determine how to treat the incoming request. As an example, if the RNC
is in the state "TX/RX Suspended", incoming SSP connection requests from
the target will be rejected by the controller hardware.  When an RNC is
"TX Suspended", it will not be selected by the controller hardware to
start outgoing command or data operations (with certain priority-based
exceptions).

As mentioned above, there are two sources for management of the RNC
states: commands from driver software, and the result of transmission
and reception conditions of commands and data signaled by the controller
hardware.  As an example of the latter, if an outgoing SSP command ends
with a OPEN_REJECT(BAD_DESTINATION) status, the RNC state will
transition to the "TX Suspended" state, and this is signaled by the
controller hardware in the status to the completion of the pending
command as well as signaled in a controller hardware event.  Examples of
the former are included in the patch changelogs.

Driver software is required to suspend the RNC in a "TX/RX Suspended"
condition before any outstanding commands can be terminated.  Failure to
guarantee this can lead to a complete hardware hang condition.  Earlier
versions of the driver software did not guarantee that an RNC was
correctly managed before I/O termination, and so operated in an unsafe
way.

Further, the driver performed unnecessary contortions to preserve the
remote device command state and so was more complicated than it needed
to be.  A simplifying driver assumption is that once an I/O has entered
the error handler path without having completed in the target, the
requirement on the driver is that all use of the sas_task must end.
Beyond that, recovery of operation is dependent on libsas and other
components to reset, rediscover and reconfigure the device before normal
operation can restart.  In the driver, this simplifying assumption meant
that the RNC management could be reduced to entry into the suspended
state, terminating the targeted I/O request, and resuming the RNC as
needed for device-specific management such as an SSP Abort Task or LUN
Reset Management request.

23 files changed, 215 insertions, 131 deletions

diff --git a/include/linux/efi.h b/include/linux/efi.h
index 88ec80670d5f..ec45ccd8708a 100644
--- a/include/linux/efi.h
+++ b/include/linux/efi.h
@@ -554,7 +554,18 @@ extern int __init efi_setup_pcdp_console(char *);
 #define EFI_VARIABLE_NON_VOLATILE       0x0000000000000001
 #define EFI_VARIABLE_BOOTSERVICE_ACCESS 0x0000000000000002
 #define EFI_VARIABLE_RUNTIME_ACCESS     0x0000000000000004
-
+#define EFI_VARIABLE_HARDWARE_ERROR_RECORD 0x0000000000000008
+#define EFI_VARIABLE_AUTHENTICATED_WRITE_ACCESS 0x0000000000000010
+#define EFI_VARIABLE_TIME_BASED_AUTHENTICATED_WRITE_ACCESS 0x0000000000000020
+#define EFI_VARIABLE_APPEND_WRITE	0x0000000000000040
+
+#define EFI_VARIABLE_MASK 	(EFI_VARIABLE_NON_VOLATILE | \
+				EFI_VARIABLE_BOOTSERVICE_ACCESS | \
+				EFI_VARIABLE_RUNTIME_ACCESS | \
+				EFI_VARIABLE_HARDWARE_ERROR_RECORD | \
+				EFI_VARIABLE_AUTHENTICATED_WRITE_ACCESS | \
+				EFI_VARIABLE_TIME_BASED_AUTHENTICATED_WRITE_ACCESS | \
+				EFI_VARIABLE_APPEND_WRITE)
 /*
  * The type of search to perform when calling boottime->locate_handle
  */
diff --git a/include/linux/etherdevice.h b/include/linux/etherdevice.h
index 8a1835855faa..fe5136d81454 100644
--- a/include/linux/etherdevice.h
+++ b/include/linux/etherdevice.h
@@ -159,7 +159,8 @@ static inline void eth_hw_addr_random(struct net_device *dev)
  * @addr1: Pointer to a six-byte array containing the Ethernet address
  * @addr2: Pointer other six-byte array containing the Ethernet address
  *
- * Compare two ethernet addresses, returns 0 if equal
+ * Compare two ethernet addresses, returns 0 if equal, non-zero otherwise.
+ * Unlike memcmp(), it doesn't return a value suitable for sorting.
  */
 static inline unsigned compare_ether_addr(const u8 *addr1, const u8 *addr2)
 {
@@ -184,10 +185,10 @@ static inline unsigned long zap_last_2bytes(unsigned long value)
  * @addr1: Pointer to an array of 8 bytes
  * @addr2: Pointer to an other array of 8 bytes
  *
- * Compare two ethernet addresses, returns 0 if equal.
- * Same result than "memcmp(addr1, addr2, ETH_ALEN)" but without conditional
- * branches, and possibly long word memory accesses on CPU allowing cheap
- * unaligned memory reads.
+ * Compare two ethernet addresses, returns 0 if equal, non-zero otherwise.
+ * Unlike memcmp(), it doesn't return a value suitable for sorting.
+ * The function doesn't need any conditional branches and possibly uses
+ * word memory accesses on CPU allowing cheap unaligned memory reads.
  * arrays = { byte1, byte2, byte3, byte4, byte6, byte7, pad1, pad2}
  *
  * Please note that alignment of addr1 & addr2 is only guaranted to be 16 bits.
diff --git a/include/linux/gpio-pxa.h b/include/linux/gpio-pxa.h
index 05071ee34c3f..d755b28ba635 100644
--- a/include/linux/gpio-pxa.h
+++ b/include/linux/gpio-pxa.h
@@ -13,4 +13,8 @@ extern int pxa_last_gpio;
 
 extern int pxa_irq_to_gpio(int irq);
 
+struct pxa_gpio_platform_data {
+	int (*gpio_set_wake)(unsigned int gpio, unsigned int on);
+};
+
 #endif /* __GPIO_PXA_H */
diff --git a/include/linux/hsi/hsi.h b/include/linux/hsi/hsi.h
index 4b178067f405..56fae865e272 100644
--- a/include/linux/hsi/hsi.h
+++ b/include/linux/hsi/hsi.h
@@ -26,9 +26,9 @@
 #include <linux/device.h>
 #include <linux/mutex.h>
 #include <linux/scatterlist.h>
-#include <linux/spinlock.h>
 #include <linux/list.h>
 #include <linux/module.h>
+#include <linux/notifier.h>
 
 /* HSI message ttype */
 #define HSI_MSG_READ	0
@@ -121,18 +121,18 @@ static inline int hsi_register_board_info(struct hsi_board_info const *info,
  * @device: Driver model representation of the device
  * @tx_cfg: HSI TX configuration
  * @rx_cfg: HSI RX configuration
- * @hsi_start_rx: Called after incoming wake line goes high
- * @hsi_stop_rx: Called after incoming wake line goes low
+ * @e_handler: Callback for handling port events (RX Wake High/Low)
+ * @pclaimed: Keeps tracks if the clients claimed its associated HSI port
+ * @nb: Notifier block for port events
  */
 struct hsi_client {
 	struct device		device;
 	struct hsi_config	tx_cfg;
 	struct hsi_config	rx_cfg;
-	void			(*hsi_start_rx)(struct hsi_client *cl);
-	void			(*hsi_stop_rx)(struct hsi_client *cl);
 	/* private: */
+	void			(*ehandler)(struct hsi_client *, unsigned long);
 	unsigned int		pclaimed:1;
-	struct list_head	link;
+	struct notifier_block	nb;
 };
 
 #define to_hsi_client(dev) container_of(dev, struct hsi_client, device)
@@ -147,6 +147,10 @@ static inline void *hsi_client_drvdata(struct hsi_client *cl)
 	return dev_get_drvdata(&cl->device);
 }
 
+int hsi_register_port_event(struct hsi_client *cl,
+			void (*handler)(struct hsi_client *, unsigned long));
+int hsi_unregister_port_event(struct hsi_client *cl);
+
 /**
  * struct hsi_client_driver - Driver associated to an HSI client
  * @driver: Driver model representation of the driver
@@ -214,8 +218,7 @@ void hsi_free_msg(struct hsi_msg *msg);
  * @start_tx: Callback to inform that a client wants to TX data
  * @stop_tx: Callback to inform that a client no longer wishes to TX data
  * @release: Callback to inform that a client no longer uses the port
- * @clients: List of hsi_clients using the port.
- * @clock: Lock to serialize access to the clients list.
+ * @n_head: Notifier chain for signaling port events to the clients.
  */
 struct hsi_port {
 	struct device			device;
@@ -231,14 +234,14 @@ struct hsi_port {
 	int				(*start_tx)(struct hsi_client *cl);
 	int				(*stop_tx)(struct hsi_client *cl);
 	int				(*release)(struct hsi_client *cl);
-	struct list_head		clients;
-	spinlock_t			clock;
+	/* private */
+	struct atomic_notifier_head	n_head;
 };
 
 #define to_hsi_port(dev) container_of(dev, struct hsi_port, device)
 #define hsi_get_port(cl) to_hsi_port((cl)->device.parent)
 
-void hsi_event(struct hsi_port *port, unsigned int event);
+int hsi_event(struct hsi_port *port, unsigned long event);
 int hsi_claim_port(struct hsi_client *cl, unsigned int share);
 void hsi_release_port(struct hsi_client *cl);
 
@@ -270,13 +273,13 @@ struct hsi_controller {
 	struct module		*owner;
 	unsigned int		id;
 	unsigned int		num_ports;
-	struct hsi_port		*port;
+	struct hsi_port		**port;
 };
 
 #define to_hsi_controller(dev) container_of(dev, struct hsi_controller, device)
 
 struct hsi_controller *hsi_alloc_controller(unsigned int n_ports, gfp_t flags);
-void hsi_free_controller(struct hsi_controller *hsi);
+void hsi_put_controller(struct hsi_controller *hsi);
 int hsi_register_controller(struct hsi_controller *hsi);
 void hsi_unregister_controller(struct hsi_controller *hsi);
 
@@ -294,7 +297,7 @@ static inline void *hsi_controller_drvdata(struct hsi_controller *hsi)
 static inline struct hsi_port *hsi_find_port_num(struct hsi_controller *hsi,
 							unsigned int num)
 {
-	return (num < hsi->num_ports) ? &hsi->port[num] : NULL;
+	return (num < hsi->num_ports) ? hsi->port[num] : NULL;
 }
 
 /*
diff --git a/include/linux/i2c/twl.h b/include/linux/i2c/twl.h
index 2463b6100333..1f90de0cfdbe 100644
--- a/include/linux/i2c/twl.h
+++ b/include/linux/i2c/twl.h
@@ -666,23 +666,11 @@ struct twl4030_codec_data {
 	unsigned int check_defaults:1;
 	unsigned int reset_registers:1;
 	unsigned int hs_extmute:1;
-	u16 hs_left_step;
-	u16 hs_right_step;
-	u16 hf_left_step;
-	u16 hf_right_step;
 	void (*set_hs_extmute)(int mute);
 };
 
 struct twl4030_vibra_data {
 	unsigned int	coexist;
-
-	/* twl6040 */
-	unsigned int vibldrv_res;	/* left driver resistance */
-	unsigned int vibrdrv_res;	/* right driver resistance */
-	unsigned int viblmotor_res;	/* left motor resistance */
-	unsigned int vibrmotor_res;	/* right motor resistance */
-	int vddvibl_uV;			/* VDDVIBL volt, set 0 for fixed reg */
-	int vddvibr_uV;			/* VDDVIBR volt, set 0 for fixed reg */
 };
 
 struct twl4030_audio_data {
diff --git a/include/linux/irq.h b/include/linux/irq.h
index 7810406f3d80..b27cfcfd3a59 100644
--- a/include/linux/irq.h
+++ b/include/linux/irq.h
@@ -49,6 +49,12 @@ typedef	void (*irq_preflow_handler_t)(struct irq_data *data);
  * IRQ_TYPE_LEVEL_LOW		- low level triggered
  * IRQ_TYPE_LEVEL_MASK		- Mask to filter out the level bits
  * IRQ_TYPE_SENSE_MASK		- Mask for all the above bits
+ * IRQ_TYPE_DEFAULT		- For use by some PICs to ask irq_set_type
+ *				  to setup the HW to a sane default (used
+ *                                by irqdomain map() callbacks to synchronize
+ *                                the HW state and SW flags for a newly
+ *                                allocated descriptor).
+ *
  * IRQ_TYPE_PROBE		- Special flag for probing in progress
  *
  * Bits which can be modified via irq_set/clear/modify_status_flags()
@@ -77,6 +83,7 @@ enum {
 	IRQ_TYPE_LEVEL_LOW	= 0x00000008,
 	IRQ_TYPE_LEVEL_MASK	= (IRQ_TYPE_LEVEL_LOW | IRQ_TYPE_LEVEL_HIGH),
 	IRQ_TYPE_SENSE_MASK	= 0x0000000f,
+	IRQ_TYPE_DEFAULT	= IRQ_TYPE_SENSE_MASK,
 
 	IRQ_TYPE_PROBE		= 0x00000010,
 
diff --git a/include/linux/libata.h b/include/linux/libata.h
index 42378d637ffb..e926df7b54c9 100644
--- a/include/linux/libata.h
+++ b/include/linux/libata.h
@@ -996,7 +996,8 @@ extern int ata_sas_scsi_ioctl(struct ata_port *ap, struct scsi_device *dev,
 extern void ata_sas_port_destroy(struct ata_port *);
 extern struct ata_port *ata_sas_port_alloc(struct ata_host *,
 					   struct ata_port_info *, struct Scsi_Host *);
-extern int ata_sas_async_port_init(struct ata_port *);
+extern void ata_sas_async_probe(struct ata_port *ap);
+extern int ata_sas_sync_probe(struct ata_port *ap);
 extern int ata_sas_port_init(struct ata_port *);
 extern int ata_sas_port_start(struct ata_port *ap);
 extern void ata_sas_port_stop(struct ata_port *ap);
diff --git a/include/linux/mfd/db5500-prcmu.h b/include/linux/mfd/db5500-prcmu.h
index 9890687f582d..5a049dfaf153 100644
--- a/include/linux/mfd/db5500-prcmu.h
+++ b/include/linux/mfd/db5500-prcmu.h
@@ -8,41 +8,14 @@
 #ifndef __MFD_DB5500_PRCMU_H
 #define __MFD_DB5500_PRCMU_H
 
-#ifdef CONFIG_MFD_DB5500_PRCMU
-
-void db5500_prcmu_early_init(void);
-int db5500_prcmu_set_epod(u16 epod_id, u8 epod_state);
-int db5500_prcmu_set_display_clocks(void);
-int db5500_prcmu_disable_dsipll(void);
-int db5500_prcmu_enable_dsipll(void);
-int db5500_prcmu_abb_read(u8 slave, u8 reg, u8 *value, u8 size);
-int db5500_prcmu_abb_write(u8 slave, u8 reg, u8 *value, u8 size);
-void db5500_prcmu_enable_wakeups(u32 wakeups);
-int db5500_prcmu_request_clock(u8 clock, bool enable);
-void db5500_prcmu_config_abb_event_readout(u32 abb_events);
-void db5500_prcmu_get_abb_event_buffer(void __iomem **buf);
-int prcmu_resetout(u8 resoutn, u8 state);
-int db5500_prcmu_set_power_state(u8 state, bool keep_ulp_clk,
-	bool keep_ap_pll);
-int db5500_prcmu_config_esram0_deep_sleep(u8 state);
-void db5500_prcmu_system_reset(u16 reset_code);
-u16 db5500_prcmu_get_reset_code(void);
-bool db5500_prcmu_is_ac_wake_requested(void);
-int db5500_prcmu_set_arm_opp(u8 opp);
-int db5500_prcmu_get_arm_opp(void);
-
-#else /* !CONFIG_UX500_SOC_DB5500 */
-
-static inline void db5500_prcmu_early_init(void) {}
-
-static inline int db5500_prcmu_abb_read(u8 slave, u8 reg, u8 *value, u8 size)
+static inline int prcmu_resetout(u8 resoutn, u8 state)
 {
-	return -ENOSYS;
+	return 0;
 }
 
-static inline int db5500_prcmu_abb_write(u8 slave, u8 reg, u8 *value, u8 size)
+static inline int db5500_prcmu_set_epod(u16 epod_id, u8 epod_state)
 {
-	return -ENOSYS;
+	return 0;
 }
 
 static inline int db5500_prcmu_request_clock(u8 clock, bool enable)
@@ -50,69 +23,82 @@ static inline int db5500_prcmu_request_clock(u8 clock, bool enable)
 	return 0;
 }
 
-static inline int db5500_prcmu_set_display_clocks(void)
+static inline int db5500_prcmu_set_power_state(u8 state, bool keep_ulp_clk,
+	bool keep_ap_pll)
 {
 	return 0;
 }
 
-static inline int db5500_prcmu_disable_dsipll(void)
+static inline int db5500_prcmu_config_esram0_deep_sleep(u8 state)
 {
 	return 0;
 }
 
-static inline int db5500_prcmu_enable_dsipll(void)
+static inline u16 db5500_prcmu_get_reset_code(void)
 {
 	return 0;
 }
 
-static inline int db5500_prcmu_config_esram0_deep_sleep(u8 state)
+static inline bool db5500_prcmu_is_ac_wake_requested(void)
 {
 	return 0;
 }
 
-static inline void db5500_prcmu_enable_wakeups(u32 wakeups) {}
-
-static inline int prcmu_resetout(u8 resoutn, u8 state)
+static inline int db5500_prcmu_set_arm_opp(u8 opp)
 {
 	return 0;
 }
 
-static inline int db5500_prcmu_set_epod(u16 epod_id, u8 epod_state)
+static inline int db5500_prcmu_get_arm_opp(void)
 {
 	return 0;
 }
 
-static inline void db5500_prcmu_get_abb_event_buffer(void __iomem **buf) {}
 static inline void db5500_prcmu_config_abb_event_readout(u32 abb_events) {}
 
-static inline int db5500_prcmu_set_power_state(u8 state, bool keep_ulp_clk,
-	bool keep_ap_pll)
-{
-	return 0;
-}
+static inline void db5500_prcmu_get_abb_event_buffer(void __iomem **buf) {}
 
 static inline void db5500_prcmu_system_reset(u16 reset_code) {}
 
-static inline u16 db5500_prcmu_get_reset_code(void)
+static inline void db5500_prcmu_enable_wakeups(u32 wakeups) {}
+
+#ifdef CONFIG_MFD_DB5500_PRCMU
+
+void db5500_prcmu_early_init(void);
+int db5500_prcmu_set_display_clocks(void);
+int db5500_prcmu_disable_dsipll(void);
+int db5500_prcmu_enable_dsipll(void);
+int db5500_prcmu_abb_read(u8 slave, u8 reg, u8 *value, u8 size);
+int db5500_prcmu_abb_write(u8 slave, u8 reg, u8 *value, u8 size);
+
+#else /* !CONFIG_UX500_SOC_DB5500 */
+
+static inline void db5500_prcmu_early_init(void) {}
+
+static inline int db5500_prcmu_abb_read(u8 slave, u8 reg, u8 *value, u8 size)
 {
-	return 0;
+	return -ENOSYS;
 }
 
-static inline bool db5500_prcmu_is_ac_wake_requested(void)
+static inline int db5500_prcmu_abb_write(u8 slave, u8 reg, u8 *value, u8 size)
 {
-	return 0;
+	return -ENOSYS;
 }
 
-static inline int db5500_prcmu_set_arm_opp(u8 opp)
+static inline int db5500_prcmu_set_display_clocks(void)
 {
 	return 0;
 }
 
-static inline int db5500_prcmu_get_arm_opp(void)
+static inline int db5500_prcmu_disable_dsipll(void)
 {
 	return 0;
 }
 
+static inline int db5500_prcmu_enable_dsipll(void)
+{
+	return 0;
+}
 
 #endif /* CONFIG_MFD_DB5500_PRCMU */
 
diff --git a/include/linux/mfd/rc5t583.h b/include/linux/mfd/rc5t583.h
index a2c61609d21d..0b64b19d81ab 100644
--- a/include/linux/mfd/rc5t583.h
+++ b/include/linux/mfd/rc5t583.h
@@ -26,6 +26,7 @@
 
 #include <linux/mutex.h>
 #include <linux/types.h>
+#include <linux/regmap.h>
 
 #define RC5T583_MAX_REGS		0xF8
 
@@ -279,14 +280,44 @@ struct rc5t583_platform_data {
 	bool		enable_shutdown;
 };
 
-int rc5t583_write(struct device *dev, u8 reg, uint8_t val);
-int rc5t583_read(struct device *dev, uint8_t reg, uint8_t *val);
-int rc5t583_set_bits(struct device *dev, unsigned int reg,
-		unsigned int bit_mask);
-int rc5t583_clear_bits(struct device *dev, unsigned int reg,
-		unsigned int bit_mask);
-int rc5t583_update(struct device *dev, unsigned int reg,
-		unsigned int val, unsigned int mask);
+static inline int rc5t583_write(struct device *dev, uint8_t reg, uint8_t val)
+{
+	struct rc5t583 *rc5t583 = dev_get_drvdata(dev);
+	return regmap_write(rc5t583->regmap, reg, val);
+}
+
+static inline int rc5t583_read(struct device *dev, uint8_t reg, uint8_t *val)
+{
+	struct rc5t583 *rc5t583 = dev_get_drvdata(dev);
+	unsigned int ival;
+	int ret;
+	ret = regmap_read(rc5t583->regmap, reg, &ival);
+	if (!ret)
+		*val = (uint8_t)ival;
+	return ret;
+}
+
+static inline int rc5t583_set_bits(struct device *dev, unsigned int reg,
+			unsigned int bit_mask)
+{
+	struct rc5t583 *rc5t583 = dev_get_drvdata(dev);
+	return regmap_update_bits(rc5t583->regmap, reg, bit_mask, bit_mask);
+}
+
+static inline int rc5t583_clear_bits(struct device *dev, unsigned int reg,
+			unsigned int bit_mask)
+{
+	struct rc5t583 *rc5t583 = dev_get_drvdata(dev);
+	return regmap_update_bits(rc5t583->regmap, reg, bit_mask, 0);
+}
+
+static inline int rc5t583_update(struct device *dev, unsigned int reg,
+		unsigned int val, unsigned int mask)
+{
+	struct rc5t583 *rc5t583 = dev_get_drvdata(dev);
+	return regmap_update_bits(rc5t583->regmap, reg, mask, val);
+}
+
 int rc5t583_ext_power_req_config(struct device *dev, int deepsleep_id,
 	int ext_pwr_req, int deepsleep_slot_nr);
 int rc5t583_irq_init(struct rc5t583 *rc5t583, int irq, int irq_base);
diff --git a/include/linux/mfd/twl6040.h b/include/linux/mfd/twl6040.h
index 9bc9ac651dad..b15b5f03f5c4 100644
--- a/include/linux/mfd/twl6040.h
+++ b/include/linux/mfd/twl6040.h
@@ -174,8 +174,35 @@
 #define TWL6040_SYSCLK_SEL_LPPLL	0
 #define TWL6040_SYSCLK_SEL_HPPLL	1
 
+struct twl6040_codec_data {
+	u16 hs_left_step;
+	u16 hs_right_step;
+	u16 hf_left_step;
+	u16 hf_right_step;
+};
+
+struct twl6040_vibra_data {
+	unsigned int vibldrv_res;	/* left driver resistance */
+	unsigned int vibrdrv_res;	/* right driver resistance */
+	unsigned int viblmotor_res;	/* left motor resistance */
+	unsigned int vibrmotor_res;	/* right motor resistance */
+	int vddvibl_uV;			/* VDDVIBL volt, set 0 for fixed reg */
+	int vddvibr_uV;			/* VDDVIBR volt, set 0 for fixed reg */
+};
+
+struct twl6040_platform_data {
+	int audpwron_gpio;	/* audio power-on gpio */
+	unsigned int irq_base;
+
+	struct twl6040_codec_data *codec;
+	struct twl6040_vibra_data *vibra;
+};
+
+struct regmap;
+
 struct twl6040 {
 	struct device *dev;
+	struct regmap *regmap;
 	struct mutex mutex;
 	struct mutex io_mutex;
 	struct mutex irq_mutex;
diff --git a/include/linux/mm.h b/include/linux/mm.h
index d8738a464b94..74aa71bea1e4 100644
--- a/include/linux/mm.h
+++ b/include/linux/mm.h
@@ -1393,29 +1393,20 @@ extern int install_special_mapping(struct mm_struct *mm,
 
 extern unsigned long get_unmapped_area(struct file *, unsigned long, unsigned long, unsigned long, unsigned long);
 
-extern unsigned long do_mmap_pgoff(struct file *file, unsigned long addr,
-	unsigned long len, unsigned long prot,
-	unsigned long flag, unsigned long pgoff);
 extern unsigned long mmap_region(struct file *file, unsigned long addr,
 	unsigned long len, unsigned long flags,
 	vm_flags_t vm_flags, unsigned long pgoff);
-
-static inline unsigned long do_mmap(struct file *file, unsigned long addr,
-	unsigned long len, unsigned long prot,
-	unsigned long flag, unsigned long offset)
-{
-	unsigned long ret = -EINVAL;
-	if ((offset + PAGE_ALIGN(len)) < offset)
-		goto out;
-	if (!(offset & ~PAGE_MASK))
-		ret = do_mmap_pgoff(file, addr, len, prot, flag, offset >> PAGE_SHIFT);
-out:
-	return ret;
-}
-
+extern unsigned long do_mmap(struct file *, unsigned long,
+        unsigned long, unsigned long,
+        unsigned long, unsigned long);
 extern int do_munmap(struct mm_struct *, unsigned long, size_t);
 
-extern unsigned long do_brk(unsigned long, unsigned long);
+/* These take the mm semaphore themselves */
+extern unsigned long vm_brk(unsigned long, unsigned long);
+extern int vm_munmap(unsigned long, size_t);
+extern unsigned long vm_mmap(struct file *, unsigned long,
+        unsigned long, unsigned long,
+        unsigned long, unsigned long);
 
 /* truncate.c */
 extern void truncate_inode_pages(struct address_space *, loff_t);
diff --git a/include/linux/mmc/card.h b/include/linux/mmc/card.h
index 01beae78f079..629b823f8836 100644
--- a/include/linux/mmc/card.h
+++ b/include/linux/mmc/card.h
@@ -481,7 +481,7 @@ struct mmc_driver {
 	struct device_driver drv;
 	int (*probe)(struct mmc_card *);
 	void (*remove)(struct mmc_card *);
-	int (*suspend)(struct mmc_card *, pm_message_t);
+	int (*suspend)(struct mmc_card *);
 	int (*resume)(struct mmc_card *);
 };
 
diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h
index 5cbaa20f1659..33900a53c990 100644
--- a/include/linux/netdevice.h
+++ b/include/linux/netdevice.h
@@ -1403,15 +1403,6 @@ static inline bool netdev_uses_dsa_tags(struct net_device *dev)
 	return 0;
 }
 
-#ifndef CONFIG_NET_NS
-static inline void skb_set_dev(struct sk_buff *skb, struct net_device *dev)
-{
-	skb->dev = dev;
-}
-#else /* CONFIG_NET_NS */
-void skb_set_dev(struct sk_buff *skb, struct net_device *dev);
-#endif
-
 static inline bool netdev_uses_trailer_tags(struct net_device *dev)
 {
 #ifdef CONFIG_NET_DSA_TAG_TRAILER
diff --git a/include/linux/netfilter_bridge.h b/include/linux/netfilter_bridge.h
index 0ddd161f3b06..31d2844e6572 100644
--- a/include/linux/netfilter_bridge.h
+++ b/include/linux/netfilter_bridge.h
@@ -104,9 +104,18 @@ struct bridge_skb_cb {
 	} daddr;
 };
 
+static inline void br_drop_fake_rtable(struct sk_buff *skb)
+{
+	struct dst_entry *dst = skb_dst(skb);
+
+	if (dst && (dst->flags & DST_FAKE_RTABLE))
+		skb_dst_drop(skb);
+}
+
 #else
 #define nf_bridge_maybe_copy_header(skb)	(0)
 #define nf_bridge_pad(skb)			(0)
+#define br_drop_fake_rtable(skb)	        do { } while (0)
 #endif /* CONFIG_BRIDGE_NETFILTER */
 
 #endif /* __KERNEL__ */
diff --git a/include/linux/nfs_xdr.h b/include/linux/nfs_xdr.h
index bfd0d1bf6707..7ba3551a0414 100644
--- a/include/linux/nfs_xdr.h
+++ b/include/linux/nfs_xdr.h
@@ -312,6 +312,11 @@ struct nfs4_layoutreturn {
 	int rpc_status;
 };
 
+struct stateowner_id {
+	__u64	create_time;
+	__u32	uniquifier;
+};
+
 /*
  * Arguments to the open call.
  */
@@ -321,7 +326,7 @@ struct nfs_openargs {
 	int			open_flags;
 	fmode_t			fmode;
 	__u64                   clientid;
-	__u64                   id;
+	struct stateowner_id	id;
 	union {
 		struct {
 			struct iattr *  attrs;    /* UNCHECKED, GUARDED */
diff --git a/include/linux/pinctrl/machine.h b/include/linux/pinctrl/machine.h
index fee4349364f7..e4d1de742502 100644
--- a/include/linux/pinctrl/machine.h
+++ b/include/linux/pinctrl/machine.h
@@ -12,6 +12,8 @@
 #ifndef __LINUX_PINCTRL_MACHINE_H
 #define __LINUX_PINCTRL_MACHINE_H
 
+#include <linux/bug.h>
+
 #include "pinctrl-state.h"
 
 enum pinctrl_map_type {
@@ -148,7 +150,7 @@ struct pinctrl_map {
 #define PIN_MAP_CONFIGS_GROUP_HOG_DEFAULT(dev, grp, cfgs)		\
 	PIN_MAP_CONFIGS_GROUP(dev, PINCTRL_STATE_DEFAULT, dev, grp, cfgs)
 
-#ifdef CONFIG_PINMUX
+#ifdef CONFIG_PINCTRL
 
 extern int pinctrl_register_mappings(struct pinctrl_map const *map,
 				unsigned num_maps);
diff --git a/include/linux/pipe_fs_i.h b/include/linux/pipe_fs_i.h
index 6d626ff0cfd0..e1ac1ce16fb0 100644
--- a/include/linux/pipe_fs_i.h
+++ b/include/linux/pipe_fs_i.h
@@ -6,6 +6,7 @@
 #define PIPE_BUF_FLAG_LRU	0x01	/* page is on the LRU */
 #define PIPE_BUF_FLAG_ATOMIC	0x02	/* was atomically mapped */
 #define PIPE_BUF_FLAG_GIFT	0x04	/* page is a gift */
+#define PIPE_BUF_FLAG_PACKET	0x08	/* read() as a packet */
 
 /**
  *	struct pipe_buffer - a linux kernel pipe buffer
diff --git a/include/linux/seqlock.h b/include/linux/seqlock.h
index c6db9fb33c44..600060e25ec6 100644
--- a/include/linux/seqlock.h
+++ b/include/linux/seqlock.h
@@ -141,7 +141,7 @@ static inline unsigned __read_seqcount_begin(const seqcount_t *s)
 	unsigned ret;
 
 repeat:
-	ret = s->sequence;
+	ret = ACCESS_ONCE(s->sequence);
 	if (unlikely(ret & 1)) {
 		cpu_relax();
 		goto repeat;
@@ -166,6 +166,27 @@ static inline unsigned read_seqcount_begin(const seqcount_t *s)
 }
 
 /**
+ * raw_seqcount_begin - begin a seq-read critical section
+ * @s: pointer to seqcount_t
+ * Returns: count to be passed to read_seqcount_retry
+ *
+ * raw_seqcount_begin opens a read critical section of the given seqcount.
+ * Validity of the critical section is tested by checking read_seqcount_retry
+ * function.
+ *
+ * Unlike read_seqcount_begin(), this function will not wait for the count
+ * to stabilize. If a writer is active when we begin, we will fail the
+ * read_seqcount_retry() instead of stabilizing at the beginning of the
+ * critical section.
+ */
+static inline unsigned raw_seqcount_begin(const seqcount_t *s)
+{
+	unsigned ret = ACCESS_ONCE(s->sequence);
+	smp_rmb();
+	return ret & ~1;
+}
+
+/**
  * __read_seqcount_retry - end a seq-read critical section (without barrier)
  * @s: pointer to seqcount_t
  * @start: count, from read_seqcount_begin
diff --git a/include/linux/skbuff.h b/include/linux/skbuff.h
index 70a3f8d49118..111f26b6e28b 100644
--- a/include/linux/skbuff.h
+++ b/include/linux/skbuff.h
@@ -238,11 +238,12 @@ enum {
 /*
  * The callback notifies userspace to release buffers when skb DMA is done in
  * lower device, the skb last reference should be 0 when calling this.
- * The desc is used to track userspace buffer index.
+ * The ctx field is used to track device context.
+ * The desc field is used to track userspace buffer index.
  */
 struct ubuf_info {
-	void (*callback)(void *);
-	void *arg;
+	void (*callback)(struct ubuf_info *);
+	void *ctx;
 	unsigned long desc;
 };
 
@@ -1019,7 +1020,7 @@ static inline void skb_queue_splice(const struct sk_buff_head *list,
 }
 
 /**
- *	skb_queue_splice - join two skb lists and reinitialise the emptied list
+ *	skb_queue_splice_init - join two skb lists and reinitialise the emptied list
  *	@list: the new list to add
  *	@head: the place to add it in the first list
  *
@@ -1050,7 +1051,7 @@ static inline void skb_queue_splice_tail(const struct sk_buff_head *list,
 }
 
 /**
- *	skb_queue_splice_tail - join two skb lists and reinitialise the emptied list
+ *	skb_queue_splice_tail_init - join two skb lists and reinitialise the emptied list
  *	@list: the new list to add
  *	@head: the place to add it in the first list
  *
diff --git a/include/linux/spi/spi.h b/include/linux/spi/spi.h
index 98679b061b63..fa702aeb5038 100644
--- a/include/linux/spi/spi.h
+++ b/include/linux/spi/spi.h
@@ -254,7 +254,7 @@ static inline void spi_unregister_driver(struct spi_driver *sdrv)
  *	driver is finished with this message, it must call
  *	spi_finalize_current_message() so the subsystem can issue the next
  *	transfer
- * @prepare_transfer_hardware: there are currently no more messages on the
+ * @unprepare_transfer_hardware: there are currently no more messages on the
  *	queue so the subsystem notifies the driver that it may relax the
  *	hardware by issuing this call
  *
diff --git a/include/linux/usb/hcd.h b/include/linux/usb/hcd.h
index 5de415707c23..d28cc78a38e4 100644
--- a/include/linux/usb/hcd.h
+++ b/include/linux/usb/hcd.h
@@ -126,6 +126,8 @@ struct usb_hcd {
 	unsigned		wireless:1;	/* Wireless USB HCD */
 	unsigned		authorized_default:1;
 	unsigned		has_tt:1;	/* Integrated TT in root hub */
+	unsigned		broken_pci_sleep:1;	/* Don't put the
+			controller in PCI-D3 for system sleep */
 
 	unsigned int		irq;		/* irq allocated */
 	void __iomem		*regs;		/* device memory/io */
diff --git a/include/linux/usb/otg.h b/include/linux/usb/otg.h
index f67810f8f21b..38ab3f46346f 100644
--- a/include/linux/usb/otg.h
+++ b/include/linux/usb/otg.h
@@ -94,6 +94,7 @@ struct usb_phy {
 
 	struct usb_otg		*otg;
 
+	struct device		*io_dev;
 	struct usb_phy_io_ops	*io_ops;
 	void __iomem		*io_priv;
 
diff --git a/include/linux/vm_event_item.h b/include/linux/vm_event_item.h
index 03b90cdc1921..06f8e3858251 100644
--- a/include/linux/vm_event_item.h
+++ b/include/linux/vm_event_item.h
@@ -26,13 +26,14 @@ enum vm_event_item { PGPGIN, PGPGOUT, PSWPIN, PSWPOUT,
 		PGFREE, PGACTIVATE, PGDEACTIVATE,
 		PGFAULT, PGMAJFAULT,
 		FOR_ALL_ZONES(PGREFILL),
-		FOR_ALL_ZONES(PGSTEAL),
+		FOR_ALL_ZONES(PGSTEAL_KSWAPD),
+		FOR_ALL_ZONES(PGSTEAL_DIRECT),
 		FOR_ALL_ZONES(PGSCAN_KSWAPD),
 		FOR_ALL_ZONES(PGSCAN_DIRECT),
 #ifdef CONFIG_NUMA
 		PGSCAN_ZONE_RECLAIM_FAILED,
 #endif
-		PGINODESTEAL, SLABS_SCANNED, KSWAPD_STEAL, KSWAPD_INODESTEAL,
+		PGINODESTEAL, SLABS_SCANNED, KSWAPD_INODESTEAL,
 		KSWAPD_LOW_WMARK_HIT_QUICKLY, KSWAPD_HIGH_WMARK_HIT_QUICKLY,
 		KSWAPD_SKIP_CONGESTION_WAIT,
 		PAGEOUTRUN, ALLOCSTALL, PGROTATED,