diff options
| author | Laxman Dewangan <ldewangan@nvidia.com> | 2017-04-06 19:05:52 +0530 |
|---|---|---|
| committer | Linus Walleij <linus.walleij@linaro.org> | 2017-04-07 12:23:29 +0200 |
| commit | 4c0facddb7d88c78c8bd977c16faa647f079ccda (patch) | |
| tree | d7bbe718888ae2348a7b315c69bf6c4eebb33d9c /include/linux/of_gpio.h | |
| parent | 11598d1740500e3c1848122f3e77ab017aa38b77 (diff) | |
gpio: core: Decouple open drain/source flag with active low/high
Currently, the GPIO interface is said to Open Drain if it is Single
Ended and active LOW. Similarly, it is said as Open Source if it is
Single Ended and active HIGH.
The active HIGH/LOW is used in the interface for setting the pin
state to HIGH or LOW when enabling/disabling the interface.
In Open Drain interface, pin is set to HIGH by putting pin in
high impedance and LOW by driving to the LOW.
In Open Source interface, pin is set to HIGH by driving pin to
HIGH and set to LOW by putting pin in high impedance.
With above, the Open Drain/Source is unrelated to the active LOW/HIGH
in interface. There is interface where the enable/disable of interface
is ether active LOW or HIGH but it is Open Drain type.
Hence decouple the Open Drain with Single Ended + Active LOW and
Open Source with Single Ended + Active HIGH.
Adding different flag for the Open Drain/Open Source which is valid
only when Single ended flag is enabled.
Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Diffstat (limited to 'include/linux/of_gpio.h')
| -rw-r--r-- | include/linux/of_gpio.h | 1 |
1 files changed, 1 insertions, 0 deletions
diff --git a/include/linux/of_gpio.h b/include/linux/of_gpio.h index 3f87ea5b8bee..1e089d5a182b 100644 --- a/include/linux/of_gpio.h +++ b/include/linux/of_gpio.h @@ -30,6 +30,7 @@ struct device_node; enum of_gpio_flags { OF_GPIO_ACTIVE_LOW = 0x1, OF_GPIO_SINGLE_ENDED = 0x2, + OF_GPIO_OPEN_DRAIN = 0x4, }; #ifdef CONFIG_OF_GPIO |