mfd: Add Renesas Synchronization Management Unit (SMU) support

Add support for ClockMatrix(TM) and 82P33xxx families of timing
and synchronization devices. The access interface can be either
SPI or I2C. Currently, it will create 2 types of MFD devices,
which are to be used by the corresponding rsmu character device
driver and the PTP hardware clock driver, respectively.

Signed-off-by: Min Li <min.li.xe@renesas.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

3 files changed, 877 insertions, 0 deletions

diff --git a/include/linux/mfd/idt82p33_reg.h b/include/linux/mfd/idt82p33_reg.h
new file mode 100644
index 000000000000..129a6c078221
--- /dev/null
+++ b/include/linux/mfd/idt82p33_reg.h
@@ -0,0 +1,112 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Register Map - Based on AN888_SMUforIEEE_SynchEther_82P33xxx_RevH.pdf
+ *
+ * Copyright (C) 2021 Integrated Device Technology, Inc., a Renesas Company.
+ */
+#ifndef HAVE_IDT82P33_REG
+#define HAVE_IDT82P33_REG
+
+/* Register address */
+#define DPLL1_TOD_CNFG 0x134
+#define DPLL2_TOD_CNFG 0x1B4
+
+#define DPLL1_TOD_STS 0x10B
+#define DPLL2_TOD_STS 0x18B
+
+#define DPLL1_TOD_TRIGGER 0x115
+#define DPLL2_TOD_TRIGGER 0x195
+
+#define DPLL1_OPERATING_MODE_CNFG 0x120
+#define DPLL2_OPERATING_MODE_CNFG 0x1A0
+
+#define DPLL1_HOLDOVER_FREQ_CNFG 0x12C
+#define DPLL2_HOLDOVER_FREQ_CNFG 0x1AC
+
+#define DPLL1_PHASE_OFFSET_CNFG 0x143
+#define DPLL2_PHASE_OFFSET_CNFG 0x1C3
+
+#define DPLL1_SYNC_EDGE_CNFG 0x140
+#define DPLL2_SYNC_EDGE_CNFG 0x1C0
+
+#define DPLL1_INPUT_MODE_CNFG 0x116
+#define DPLL2_INPUT_MODE_CNFG 0x196
+
+#define DPLL1_OPERATING_STS 0x102
+#define DPLL2_OPERATING_STS 0x182
+
+#define DPLL1_CURRENT_FREQ_STS 0x103
+#define DPLL2_CURRENT_FREQ_STS 0x183
+
+#define REG_SOFT_RESET 0X381
+
+#define OUT_MUX_CNFG(outn) REG_ADDR(0x6, (0xC * (outn)))
+
+/* Register bit definitions */
+#define SYNC_TOD BIT(1)
+#define PH_OFFSET_EN BIT(7)
+#define SQUELCH_ENABLE BIT(5)
+
+/* Bit definitions for the DPLL_MODE register */
+#define PLL_MODE_SHIFT		(0)
+#define PLL_MODE_MASK		(0x1F)
+#define COMBO_MODE_EN		BIT(5)
+#define COMBO_MODE_SHIFT	(6)
+#define COMBO_MODE_MASK		(0x3)
+
+/* Bit definitions for DPLL_OPERATING_STS register */
+#define OPERATING_STS_MASK	(0x7)
+#define OPERATING_STS_SHIFT	(0x0)
+
+/* Bit definitions for DPLL_TOD_TRIGGER register */
+#define READ_TRIGGER_MASK	(0xF)
+#define READ_TRIGGER_SHIFT	(0x0)
+#define WRITE_TRIGGER_MASK	(0xF0)
+#define WRITE_TRIGGER_SHIFT	(0x4)
+
+/* Bit definitions for REG_SOFT_RESET register */
+#define SOFT_RESET_EN		BIT(7)
+
+enum pll_mode {
+	PLL_MODE_MIN = 0,
+	PLL_MODE_AUTOMATIC = PLL_MODE_MIN,
+	PLL_MODE_FORCE_FREERUN = 1,
+	PLL_MODE_FORCE_HOLDOVER = 2,
+	PLL_MODE_FORCE_LOCKED = 4,
+	PLL_MODE_FORCE_PRE_LOCKED2 = 5,
+	PLL_MODE_FORCE_PRE_LOCKED = 6,
+	PLL_MODE_FORCE_LOST_PHASE = 7,
+	PLL_MODE_DCO = 10,
+	PLL_MODE_WPH = 18,
+	PLL_MODE_MAX = PLL_MODE_WPH,
+};
+
+enum hw_tod_trig_sel {
+	HW_TOD_TRIG_SEL_MIN = 0,
+	HW_TOD_TRIG_SEL_NO_WRITE = HW_TOD_TRIG_SEL_MIN,
+	HW_TOD_TRIG_SEL_NO_READ = HW_TOD_TRIG_SEL_MIN,
+	HW_TOD_TRIG_SEL_SYNC_SEL = 1,
+	HW_TOD_TRIG_SEL_IN12 = 2,
+	HW_TOD_TRIG_SEL_IN13 = 3,
+	HW_TOD_TRIG_SEL_IN14 = 4,
+	HW_TOD_TRIG_SEL_TOD_PPS = 5,
+	HW_TOD_TRIG_SEL_TIMER_INTERVAL = 6,
+	HW_TOD_TRIG_SEL_MSB_PHASE_OFFSET_CNFG = 7,
+	HW_TOD_TRIG_SEL_MSB_HOLDOVER_FREQ_CNFG = 8,
+	HW_TOD_WR_TRIG_SEL_MSB_TOD_CNFG = 9,
+	HW_TOD_RD_TRIG_SEL_LSB_TOD_STS = HW_TOD_WR_TRIG_SEL_MSB_TOD_CNFG,
+	WR_TRIG_SEL_MAX = HW_TOD_WR_TRIG_SEL_MSB_TOD_CNFG,
+};
+
+/** @brief Enumerated type listing DPLL operational modes */
+enum dpll_state {
+	DPLL_STATE_FREERUN = 1,
+	DPLL_STATE_HOLDOVER = 2,
+	DPLL_STATE_LOCKED = 4,
+	DPLL_STATE_PRELOCKED2 = 5,
+	DPLL_STATE_PRELOCKED = 6,
+	DPLL_STATE_LOSTPHASE = 7,
+	DPLL_STATE_MAX
+};
+
+#endif
diff --git a/include/linux/mfd/idt8a340_reg.h b/include/linux/mfd/idt8a340_reg.h
new file mode 100644
index 000000000000..92d763230bdf
--- /dev/null
+++ b/include/linux/mfd/idt8a340_reg.h
@@ -0,0 +1,729 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Based on 5.2.0, Family Programming Guide (Sept 30, 2020)
+ *
+ * Copyright (C) 2021 Integrated Device Technology, Inc., a Renesas Company.
+ */
+#ifndef HAVE_IDT8A340_REG
+#define HAVE_IDT8A340_REG
+
+#define PAGE_ADDR_BASE                    0x0000
+#define PAGE_ADDR                         0x00fc
+
+#define HW_REVISION                       0x8180
+#define REV_ID                            0x007a
+
+#define HW_DPLL_0                         (0x8a00)
+#define HW_DPLL_1                         (0x8b00)
+#define HW_DPLL_2                         (0x8c00)
+#define HW_DPLL_3                         (0x8d00)
+#define HW_DPLL_4                         (0x8e00)
+#define HW_DPLL_5                         (0x8f00)
+#define HW_DPLL_6                         (0x9000)
+#define HW_DPLL_7                         (0x9100)
+
+#define HW_DPLL_TOD_SW_TRIG_ADDR__0       (0x080)
+#define HW_DPLL_TOD_CTRL_1                (0x089)
+#define HW_DPLL_TOD_CTRL_2                (0x08A)
+#define HW_DPLL_TOD_OVR__0                (0x098)
+#define HW_DPLL_TOD_OUT_0__0              (0x0B0)
+
+#define HW_Q0_Q1_CH_SYNC_CTRL_0           (0xa740)
+#define HW_Q0_Q1_CH_SYNC_CTRL_1           (0xa741)
+#define HW_Q2_Q3_CH_SYNC_CTRL_0           (0xa742)
+#define HW_Q2_Q3_CH_SYNC_CTRL_1           (0xa743)
+#define HW_Q4_Q5_CH_SYNC_CTRL_0           (0xa744)
+#define HW_Q4_Q5_CH_SYNC_CTRL_1           (0xa745)
+#define HW_Q6_Q7_CH_SYNC_CTRL_0           (0xa746)
+#define HW_Q6_Q7_CH_SYNC_CTRL_1           (0xa747)
+#define HW_Q8_CH_SYNC_CTRL_0              (0xa748)
+#define HW_Q8_CH_SYNC_CTRL_1              (0xa749)
+#define HW_Q9_CH_SYNC_CTRL_0              (0xa74a)
+#define HW_Q9_CH_SYNC_CTRL_1              (0xa74b)
+#define HW_Q10_CH_SYNC_CTRL_0             (0xa74c)
+#define HW_Q10_CH_SYNC_CTRL_1             (0xa74d)
+#define HW_Q11_CH_SYNC_CTRL_0             (0xa74e)
+#define HW_Q11_CH_SYNC_CTRL_1             (0xa74f)
+
+#define SYNC_SOURCE_DPLL0_TOD_PPS	0x14
+#define SYNC_SOURCE_DPLL1_TOD_PPS	0x15
+#define SYNC_SOURCE_DPLL2_TOD_PPS	0x16
+#define SYNC_SOURCE_DPLL3_TOD_PPS	0x17
+
+#define SYNCTRL1_MASTER_SYNC_RST	BIT(7)
+#define SYNCTRL1_MASTER_SYNC_TRIG	BIT(5)
+#define SYNCTRL1_TOD_SYNC_TRIG		BIT(4)
+#define SYNCTRL1_FBDIV_FRAME_SYNC_TRIG	BIT(3)
+#define SYNCTRL1_FBDIV_SYNC_TRIG	BIT(2)
+#define SYNCTRL1_Q1_DIV_SYNC_TRIG	BIT(1)
+#define SYNCTRL1_Q0_DIV_SYNC_TRIG	BIT(0)
+
+#define HW_Q8_CTRL_SPARE  (0xa7d4)
+#define HW_Q11_CTRL_SPARE (0xa7ec)
+
+/**
+ * Select FOD5 as sync_trigger for Q8 divider.
+ * Transition from logic zero to one
+ * sets trigger to sync Q8 divider.
+ *
+ * Unused when FOD4 is driving Q8 divider (normal operation).
+ */
+#define Q9_TO_Q8_SYNC_TRIG  BIT(1)
+
+/**
+ * Enable FOD5 as driver for clock and sync for Q8 divider.
+ * Enable fanout buffer for FOD5.
+ *
+ * Unused when FOD4 is driving Q8 divider (normal operation).
+ */
+#define Q9_TO_Q8_FANOUT_AND_CLOCK_SYNC_ENABLE_MASK  (BIT(0) | BIT(2))
+
+/**
+ * Select FOD6 as sync_trigger for Q11 divider.
+ * Transition from logic zero to one
+ * sets trigger to sync Q11 divider.
+ *
+ * Unused when FOD7 is driving Q11 divider (normal operation).
+ */
+#define Q10_TO_Q11_SYNC_TRIG  BIT(1)
+
+/**
+ * Enable FOD6 as driver for clock and sync for Q11 divider.
+ * Enable fanout buffer for FOD6.
+ *
+ * Unused when FOD7 is driving Q11 divider (normal operation).
+ */
+#define Q10_TO_Q11_FANOUT_AND_CLOCK_SYNC_ENABLE_MASK  (BIT(0) | BIT(2))
+
+#define RESET_CTRL                        0xc000
+#define SM_RESET                          0x0012
+#define SM_RESET_V520                     0x0013
+#define SM_RESET_CMD                      0x5A
+
+#define GENERAL_STATUS                    0xc014
+#define BOOT_STATUS                       0x0000
+#define HW_REV_ID                         0x000A
+#define BOND_ID                           0x000B
+#define HW_CSR_ID                         0x000C
+#define HW_IRQ_ID                         0x000E
+#define MAJ_REL                           0x0010
+#define MIN_REL                           0x0011
+#define HOTFIX_REL                        0x0012
+#define PIPELINE_ID                       0x0014
+#define BUILD_ID                          0x0018
+#define JTAG_DEVICE_ID                    0x001c
+#define PRODUCT_ID                        0x001e
+#define OTP_SCSR_CONFIG_SELECT            0x0022
+
+#define STATUS                            0xc03c
+#define DPLL0_STATUS			  0x0018
+#define DPLL1_STATUS			  0x0019
+#define DPLL2_STATUS			  0x001a
+#define DPLL3_STATUS			  0x001b
+#define DPLL4_STATUS			  0x001c
+#define DPLL5_STATUS			  0x001d
+#define DPLL6_STATUS			  0x001e
+#define DPLL7_STATUS			  0x001f
+#define DPLL_SYS_STATUS                   0x0020
+#define DPLL_SYS_APLL_STATUS              0x0021
+#define DPLL0_FILTER_STATUS               0x0044
+#define DPLL1_FILTER_STATUS               0x004c
+#define DPLL2_FILTER_STATUS               0x0054
+#define DPLL3_FILTER_STATUS               0x005c
+#define DPLL4_FILTER_STATUS               0x0064
+#define DPLL5_FILTER_STATUS               0x006c
+#define DPLL6_FILTER_STATUS               0x0074
+#define DPLL7_FILTER_STATUS               0x007c
+#define DPLLSYS_FILTER_STATUS             0x0084
+#define USER_GPIO0_TO_7_STATUS            0x008a
+#define USER_GPIO8_TO_15_STATUS           0x008b
+
+#define GPIO_USER_CONTROL                 0xc160
+#define GPIO0_TO_7_OUT                    0x0000
+#define GPIO8_TO_15_OUT                   0x0001
+#define GPIO0_TO_7_OUT_V520               0x0002
+#define GPIO8_TO_15_OUT_V520              0x0003
+
+#define STICKY_STATUS_CLEAR               0xc164
+
+#define GPIO_TOD_NOTIFICATION_CLEAR       0xc16c
+
+#define ALERT_CFG                         0xc188
+
+#define SYS_DPLL_XO                       0xc194
+
+#define SYS_APLL                          0xc19c
+
+#define INPUT_0                           0xc1b0
+#define INPUT_1                           0xc1c0
+#define INPUT_2                           0xc1d0
+#define INPUT_3                           0xc200
+#define INPUT_4                           0xc210
+#define INPUT_5                           0xc220
+#define INPUT_6                           0xc230
+#define INPUT_7                           0xc240
+#define INPUT_8                           0xc250
+#define INPUT_9                           0xc260
+#define INPUT_10                          0xc280
+#define INPUT_11                          0xc290
+#define INPUT_12                          0xc2a0
+#define INPUT_13                          0xc2b0
+#define INPUT_14                          0xc2c0
+#define INPUT_15                          0xc2d0
+
+#define REF_MON_0                         0xc2e0
+#define REF_MON_1                         0xc2ec
+#define REF_MON_2                         0xc300
+#define REF_MON_3                         0xc30c
+#define REF_MON_4                         0xc318
+#define REF_MON_5                         0xc324
+#define REF_MON_6                         0xc330
+#define REF_MON_7                         0xc33c
+#define REF_MON_8                         0xc348
+#define REF_MON_9                         0xc354
+#define REF_MON_10                        0xc360
+#define REF_MON_11                        0xc36c
+#define REF_MON_12                        0xc380
+#define REF_MON_13                        0xc38c
+#define REF_MON_14                        0xc398
+#define REF_MON_15                        0xc3a4
+
+#define DPLL_0                            0xc3b0
+#define DPLL_CTRL_REG_0                   0x0002
+#define DPLL_CTRL_REG_1                   0x0003
+#define DPLL_CTRL_REG_2                   0x0004
+#define DPLL_TOD_SYNC_CFG                 0x0031
+#define DPLL_COMBO_SLAVE_CFG_0            0x0032
+#define DPLL_COMBO_SLAVE_CFG_1            0x0033
+#define DPLL_SLAVE_REF_CFG                0x0034
+#define DPLL_REF_MODE                     0x0035
+#define DPLL_PHASE_MEASUREMENT_CFG        0x0036
+#define DPLL_MODE                         0x0037
+#define DPLL_MODE_V520                    0x003B
+#define DPLL_1                            0xc400
+#define DPLL_2                            0xc438
+#define DPLL_2_V520                       0xc43c
+#define DPLL_3                            0xc480
+#define DPLL_4                            0xc4b8
+#define DPLL_4_V520                       0xc4bc
+#define DPLL_5                            0xc500
+#define DPLL_6                            0xc538
+#define DPLL_6_V520                       0xc53c
+#define DPLL_7                            0xc580
+#define SYS_DPLL                          0xc5b8
+#define SYS_DPLL_V520                     0xc5bc
+
+#define DPLL_CTRL_0                       0xc600
+#define DPLL_CTRL_DPLL_MANU_REF_CFG       0x0001
+#define DPLL_CTRL_DPLL_FOD_FREQ           0x001c
+#define DPLL_CTRL_COMBO_MASTER_CFG        0x003a
+#define DPLL_CTRL_1                       0xc63c
+#define DPLL_CTRL_2                       0xc680
+#define DPLL_CTRL_3                       0xc6bc
+#define DPLL_CTRL_4                       0xc700
+#define DPLL_CTRL_5                       0xc73c
+#define DPLL_CTRL_6                       0xc780
+#define DPLL_CTRL_7                       0xc7bc
+#define SYS_DPLL_CTRL                     0xc800
+
+#define DPLL_PHASE_0                      0xc818
+/* Signed 42-bit FFO in units of 2^(-53) */
+#define DPLL_WR_PHASE                     0x0000
+#define DPLL_PHASE_1                      0xc81c
+#define DPLL_PHASE_2                      0xc820
+#define DPLL_PHASE_3                      0xc824
+#define DPLL_PHASE_4                      0xc828
+#define DPLL_PHASE_5                      0xc82c
+#define DPLL_PHASE_6                      0xc830
+#define DPLL_PHASE_7                      0xc834
+
+#define DPLL_FREQ_0                       0xc838
+/* Signed 42-bit FFO in units of 2^(-53) */
+#define DPLL_WR_FREQ                      0x0000
+#define DPLL_FREQ_1                       0xc840
+#define DPLL_FREQ_2                       0xc848
+#define DPLL_FREQ_3                       0xc850
+#define DPLL_FREQ_4                       0xc858
+#define DPLL_FREQ_5                       0xc860
+#define DPLL_FREQ_6                       0xc868
+#define DPLL_FREQ_7                       0xc870
+
+#define DPLL_PHASE_PULL_IN_0              0xc880
+#define PULL_IN_OFFSET                    0x0000 /* Signed 32 bit */
+#define PULL_IN_SLOPE_LIMIT               0x0004 /* Unsigned 24 bit */
+#define PULL_IN_CTRL                      0x0007
+#define DPLL_PHASE_PULL_IN_1              0xc888
+#define DPLL_PHASE_PULL_IN_2              0xc890
+#define DPLL_PHASE_PULL_IN_3              0xc898
+#define DPLL_PHASE_PULL_IN_4              0xc8a0
+#define DPLL_PHASE_PULL_IN_5              0xc8a8
+#define DPLL_PHASE_PULL_IN_6              0xc8b0
+#define DPLL_PHASE_PULL_IN_7              0xc8b8
+
+#define GPIO_CFG                          0xc8c0
+#define GPIO_CFG_GBL                      0x0000
+#define GPIO_0                            0xc8c2
+#define GPIO_DCO_INC_DEC                  0x0000
+#define GPIO_OUT_CTRL_0                   0x0001
+#define GPIO_OUT_CTRL_1                   0x0002
+#define GPIO_TOD_TRIG                     0x0003
+#define GPIO_DPLL_INDICATOR               0x0004
+#define GPIO_LOS_INDICATOR                0x0005
+#define GPIO_REF_INPUT_DSQ_0              0x0006
+#define GPIO_REF_INPUT_DSQ_1              0x0007
+#define GPIO_REF_INPUT_DSQ_2              0x0008
+#define GPIO_REF_INPUT_DSQ_3              0x0009
+#define GPIO_MAN_CLK_SEL_0                0x000a
+#define GPIO_MAN_CLK_SEL_1                0x000b
+#define GPIO_MAN_CLK_SEL_2                0x000c
+#define GPIO_SLAVE                        0x000d
+#define GPIO_ALERT_OUT_CFG                0x000e
+#define GPIO_TOD_NOTIFICATION_CFG         0x000f
+#define GPIO_CTRL                         0x0010
+#define GPIO_CTRL_V520                    0x0011
+#define GPIO_1                            0xc8d4
+#define GPIO_2                            0xc8e6
+#define GPIO_3                            0xc900
+#define GPIO_4                            0xc912
+#define GPIO_5                            0xc924
+#define GPIO_6                            0xc936
+#define GPIO_7                            0xc948
+#define GPIO_8                            0xc95a
+#define GPIO_9                            0xc980
+#define GPIO_10                           0xc992
+#define GPIO_11                           0xc9a4
+#define GPIO_12                           0xc9b6
+#define GPIO_13                           0xc9c8
+#define GPIO_14                           0xc9da
+#define GPIO_15                           0xca00
+
+#define OUT_DIV_MUX                       0xca12
+#define OUTPUT_0                          0xca14
+#define OUTPUT_0_V520                     0xca20
+/* FOD frequency output divider value */
+#define OUT_DIV                           0x0000
+#define OUT_DUTY_CYCLE_HIGH               0x0004
+#define OUT_CTRL_0                        0x0008
+#define OUT_CTRL_1                        0x0009
+/* Phase adjustment in FOD cycles */
+#define OUT_PHASE_ADJ                     0x000c
+#define OUTPUT_1                          0xca24
+#define OUTPUT_1_V520                     0xca30
+#define OUTPUT_2                          0xca34
+#define OUTPUT_2_V520                     0xca40
+#define OUTPUT_3                          0xca44
+#define OUTPUT_3_V520                     0xca50
+#define OUTPUT_4                          0xca54
+#define OUTPUT_4_V520                     0xca60
+#define OUTPUT_5                          0xca64
+#define OUTPUT_5_V520                     0xca80
+#define OUTPUT_6                          0xca80
+#define OUTPUT_6_V520                     0xca90
+#define OUTPUT_7                          0xca90
+#define OUTPUT_7_V520                     0xcaa0
+#define OUTPUT_8                          0xcaa0
+#define OUTPUT_8_V520                     0xcab0
+#define OUTPUT_9                          0xcab0
+#define OUTPUT_9_V520                     0xcac0
+#define OUTPUT_10                         0xcac0
+#define OUTPUT_10_V520                     0xcad0
+#define OUTPUT_11                         0xcad0
+#define OUTPUT_11_V520                    0xcae0
+
+#define SERIAL                            0xcae0
+#define SERIAL_V520                       0xcaf0
+
+#define PWM_ENCODER_0                     0xcb00
+#define PWM_ENCODER_1                     0xcb08
+#define PWM_ENCODER_2                     0xcb10
+#define PWM_ENCODER_3                     0xcb18
+#define PWM_ENCODER_4                     0xcb20
+#define PWM_ENCODER_5                     0xcb28
+#define PWM_ENCODER_6                     0xcb30
+#define PWM_ENCODER_7                     0xcb38
+#define PWM_DECODER_0                     0xcb40
+#define PWM_DECODER_1                     0xcb48
+#define PWM_DECODER_1_V520                0xcb4a
+#define PWM_DECODER_2                     0xcb50
+#define PWM_DECODER_2_V520                0xcb54
+#define PWM_DECODER_3                     0xcb58
+#define PWM_DECODER_3_V520                0xcb5e
+#define PWM_DECODER_4                     0xcb60
+#define PWM_DECODER_4_V520                0xcb68
+#define PWM_DECODER_5                     0xcb68
+#define PWM_DECODER_5_V520                0xcb80
+#define PWM_DECODER_6                     0xcb70
+#define PWM_DECODER_6_V520                0xcb8a
+#define PWM_DECODER_7                     0xcb80
+#define PWM_DECODER_7_V520                0xcb94
+#define PWM_DECODER_8                     0xcb88
+#define PWM_DECODER_8_V520                0xcb9e
+#define PWM_DECODER_9                     0xcb90
+#define PWM_DECODER_9_V520                0xcba8
+#define PWM_DECODER_10                    0xcb98
+#define PWM_DECODER_10_V520               0xcbb2
+#define PWM_DECODER_11                    0xcba0
+#define PWM_DECODER_11_V520               0xcbbc
+#define PWM_DECODER_12                    0xcba8
+#define PWM_DECODER_12_V520               0xcbc6
+#define PWM_DECODER_13                    0xcbb0
+#define PWM_DECODER_13_V520               0xcbd0
+#define PWM_DECODER_14                    0xcbb8
+#define PWM_DECODER_14_V520               0xcbda
+#define PWM_DECODER_15                    0xcbc0
+#define PWM_DECODER_15_V520               0xcbe4
+#define PWM_USER_DATA                     0xcbc8
+#define PWM_USER_DATA_V520                0xcbf0
+
+#define TOD_0                             0xcbcc
+#define TOD_0_V520                        0xcc00
+/* Enable TOD counter, output channel sync and even-PPS mode */
+#define TOD_CFG                           0x0000
+#define TOD_CFG_V520                      0x0001
+#define TOD_1                             0xcbce
+#define TOD_1_V520                        0xcc02
+#define TOD_2                             0xcbd0
+#define TOD_2_V520                        0xcc04
+#define TOD_3                             0xcbd2
+#define TOD_3_V520                        0xcc06
+
+#define TOD_WRITE_0                       0xcc00
+#define TOD_WRITE_0_V520                  0xcc10
+/* 8-bit subns, 32-bit ns, 48-bit seconds */
+#define TOD_WRITE                         0x0000
+/* Counter increments after TOD write is completed */
+#define TOD_WRITE_COUNTER                 0x000c
+/* TOD write trigger configuration */
+#define TOD_WRITE_SELECT_CFG_0            0x000d
+/* TOD write trigger selection */
+#define TOD_WRITE_CMD                     0x000f
+#define TOD_WRITE_1                       0xcc10
+#define TOD_WRITE_1_V520                  0xcc20
+#define TOD_WRITE_2                       0xcc20
+#define TOD_WRITE_2_V520                  0xcc30
+#define TOD_WRITE_3                       0xcc30
+#define TOD_WRITE_3_V520                  0xcc40
+
+#define TOD_READ_PRIMARY_0                0xcc40
+#define TOD_READ_PRIMARY_0_V520           0xcc50
+/* 8-bit subns, 32-bit ns, 48-bit seconds */
+#define TOD_READ_PRIMARY                  0x0000
+/* Counter increments after TOD write is completed */
+#define TOD_READ_PRIMARY_COUNTER          0x000b
+/* Read trigger configuration */
+#define TOD_READ_PRIMARY_SEL_CFG_0        0x000c
+/* Read trigger selection */
+#define TOD_READ_PRIMARY_CMD              0x000e
+#define TOD_READ_PRIMARY_CMD_V520         0x000f
+#define TOD_READ_PRIMARY_1                0xcc50
+#define TOD_READ_PRIMARY_1_V520           0xcc60
+#define TOD_READ_PRIMARY_2                0xcc60
+#define TOD_READ_PRIMARY_2_V520           0xcc80
+#define TOD_READ_PRIMARY_3                0xcc80
+#define TOD_READ_PRIMARY_3_V520           0xcc90
+
+#define TOD_READ_SECONDARY_0              0xcc90
+#define TOD_READ_SECONDARY_0_V520         0xcca0
+#define TOD_READ_SECONDARY_1              0xcca0
+#define TOD_READ_SECONDARY_1_V520         0xccb0
+#define TOD_READ_SECONDARY_2              0xccb0
+#define TOD_READ_SECONDARY_2_V520         0xccc0
+#define TOD_READ_SECONDARY_3              0xccc0
+#define TOD_READ_SECONDARY_3_V520         0xccd0
+
+#define OUTPUT_TDC_CFG                    0xccd0
+#define OUTPUT_TDC_CFG_V520               0xcce0
+#define OUTPUT_TDC_0                      0xcd00
+#define OUTPUT_TDC_1                      0xcd08
+#define OUTPUT_TDC_2                      0xcd10
+#define OUTPUT_TDC_3                      0xcd18
+#define INPUT_TDC                         0xcd20
+
+#define SCRATCH                           0xcf50
+#define SCRATCH_V520                      0xcf4c
+
+#define EEPROM                            0xcf68
+#define EEPROM_V520                       0xcf64
+
+#define OTP                               0xcf70
+
+#define BYTE                              0xcf80
+
+/* Bit definitions for the MAJ_REL register */
+#define MAJOR_SHIFT                       (1)
+#define MAJOR_MASK                        (0x7f)
+#define PR_BUILD                          BIT(0)
+
+/* Bit definitions for the USER_GPIO0_TO_7_STATUS register */
+#define GPIO0_LEVEL                       BIT(0)
+#define GPIO1_LEVEL                       BIT(1)
+#define GPIO2_LEVEL                       BIT(2)
+#define GPIO3_LEVEL                       BIT(3)
+#define GPIO4_LEVEL                       BIT(4)
+#define GPIO5_LEVEL                       BIT(5)
+#define GPIO6_LEVEL                       BIT(6)
+#define GPIO7_LEVEL                       BIT(7)
+
+/* Bit definitions for the USER_GPIO8_TO_15_STATUS register */
+#define GPIO8_LEVEL                       BIT(0)
+#define GPIO9_LEVEL                       BIT(1)
+#define GPIO10_LEVEL                      BIT(2)
+#define GPIO11_LEVEL                      BIT(3)
+#define GPIO12_LEVEL                      BIT(4)
+#define GPIO13_LEVEL                      BIT(5)
+#define GPIO14_LEVEL                      BIT(6)
+#define GPIO15_LEVEL                      BIT(7)
+
+/* Bit definitions for the GPIO0_TO_7_OUT register */
+#define GPIO0_DRIVE_LEVEL                 BIT(0)
+#define GPIO1_DRIVE_LEVEL                 BIT(1)
+#define GPIO2_DRIVE_LEVEL                 BIT(2)
+#define GPIO3_DRIVE_LEVEL                 BIT(3)
+#define GPIO4_DRIVE_LEVEL                 BIT(4)
+#define GPIO5_DRIVE_LEVEL                 BIT(5)
+#define GPIO6_DRIVE_LEVEL                 BIT(6)
+#define GPIO7_DRIVE_LEVEL                 BIT(7)
+
+/* Bit definitions for the GPIO8_TO_15_OUT register */
+#define GPIO8_DRIVE_LEVEL                 BIT(0)
+#define GPIO9_DRIVE_LEVEL                 BIT(1)
+#define GPIO10_DRIVE_LEVEL                BIT(2)
+#define GPIO11_DRIVE_LEVEL                BIT(3)
+#define GPIO12_DRIVE_LEVEL                BIT(4)
+#define GPIO13_DRIVE_LEVEL                BIT(5)
+#define GPIO14_DRIVE_LEVEL                BIT(6)
+#define GPIO15_DRIVE_LEVEL                BIT(7)
+
+/* Bit definitions for the DPLL_TOD_SYNC_CFG register */
+#define TOD_SYNC_SOURCE_SHIFT             (1)
+#define TOD_SYNC_SOURCE_MASK              (0x3)
+#define TOD_SYNC_EN                       BIT(0)
+
+/* Bit definitions for the DPLL_MODE register */
+#define WRITE_TIMER_MODE                  BIT(6)
+#define PLL_MODE_SHIFT                    (3)
+#define PLL_MODE_MASK                     (0x7)
+#define STATE_MODE_SHIFT                  (0)
+#define STATE_MODE_MASK                   (0x7)
+
+/* Bit definitions for the GPIO_CFG_GBL register */
+#define SUPPLY_MODE_SHIFT                 (0)
+#define SUPPLY_MODE_MASK                  (0x3)
+
+/* Bit definitions for the GPIO_DCO_INC_DEC register */
+#define INCDEC_DPLL_INDEX_SHIFT           (0)
+#define INCDEC_DPLL_INDEX_MASK            (0x7)
+
+/* Bit definitions for the GPIO_OUT_CTRL_0 register */
+#define CTRL_OUT_0                        BIT(0)
+#define CTRL_OUT_1                        BIT(1)
+#define CTRL_OUT_2                        BIT(2)
+#define CTRL_OUT_3                        BIT(3)
+#define CTRL_OUT_4                        BIT(4)
+#define CTRL_OUT_5                        BIT(5)
+#define CTRL_OUT_6                        BIT(6)
+#define CTRL_OUT_7                        BIT(7)
+
+/* Bit definitions for the GPIO_OUT_CTRL_1 register */
+#define CTRL_OUT_8                        BIT(0)
+#define CTRL_OUT_9                        BIT(1)
+#define CTRL_OUT_10                       BIT(2)
+#define CTRL_OUT_11                       BIT(3)
+#define CTRL_OUT_12                       BIT(4)
+#define CTRL_OUT_13                       BIT(5)
+#define CTRL_OUT_14                       BIT(6)
+#define CTRL_OUT_15                       BIT(7)
+
+/* Bit definitions for the GPIO_TOD_TRIG register */
+#define TOD_TRIG_0                        BIT(0)
+#define TOD_TRIG_1                        BIT(1)
+#define TOD_TRIG_2                        BIT(2)
+#define TOD_TRIG_3                        BIT(3)
+
+/* Bit definitions for the GPIO_DPLL_INDICATOR register */
+#define IND_DPLL_INDEX_SHIFT              (0)
+#define IND_DPLL_INDEX_MASK               (0x7)
+
+/* Bit definitions for the GPIO_LOS_INDICATOR register */
+#define REFMON_INDEX_SHIFT                (0)
+#define REFMON_INDEX_MASK                 (0xf)
+/* Active level of LOS indicator, 0=low 1=high */
+#define ACTIVE_LEVEL                      BIT(4)
+
+/* Bit definitions for the GPIO_REF_INPUT_DSQ_0 register */
+#define DSQ_INP_0                         BIT(0)
+#define DSQ_INP_1                         BIT(1)
+#define DSQ_INP_2                         BIT(2)
+#define DSQ_INP_3                         BIT(3)
+#define DSQ_INP_4                         BIT(4)
+#define DSQ_INP_5                         BIT(5)
+#define DSQ_INP_6                         BIT(6)
+#define DSQ_INP_7                         BIT(7)
+
+/* Bit definitions for the GPIO_REF_INPUT_DSQ_1 register */
+#define DSQ_INP_8                         BIT(0)
+#define DSQ_INP_9                         BIT(1)
+#define DSQ_INP_10                        BIT(2)
+#define DSQ_INP_11                        BIT(3)
+#define DSQ_INP_12                        BIT(4)
+#define DSQ_INP_13                        BIT(5)
+#define DSQ_INP_14                        BIT(6)
+#define DSQ_INP_15                        BIT(7)
+
+/* Bit definitions for the GPIO_REF_INPUT_DSQ_2 register */
+#define DSQ_DPLL_0                        BIT(0)
+#define DSQ_DPLL_1                        BIT(1)
+#define DSQ_DPLL_2                        BIT(2)
+#define DSQ_DPLL_3                        BIT(3)
+#define DSQ_DPLL_4                        BIT(4)
+#define DSQ_DPLL_5                        BIT(5)
+#define DSQ_DPLL_6                        BIT(6)
+#define DSQ_DPLL_7                        BIT(7)
+
+/* Bit definitions for the GPIO_REF_INPUT_DSQ_3 register */
+#define DSQ_DPLL_SYS                      BIT(0)
+#define GPIO_DSQ_LEVEL                    BIT(1)
+
+/* Bit definitions for the GPIO_TOD_NOTIFICATION_CFG register */
+#define DPLL_TOD_SHIFT                    (0)
+#define DPLL_TOD_MASK                     (0x3)
+#define TOD_READ_SECONDARY                BIT(2)
+#define GPIO_ASSERT_LEVEL                 BIT(3)
+
+/* Bit definitions for the GPIO_CTRL register */
+#define GPIO_FUNCTION_EN                  BIT(0)
+#define GPIO_CMOS_OD_MODE                 BIT(1)
+#define GPIO_CONTROL_DIR                  BIT(2)
+#define GPIO_PU_PD_MODE                   BIT(3)
+#define GPIO_FUNCTION_SHIFT               (4)
+#define GPIO_FUNCTION_MASK                (0xf)
+
+/* Bit definitions for the OUT_CTRL_1 register */
+#define OUT_SYNC_DISABLE                  BIT(7)
+#define SQUELCH_VALUE                     BIT(6)
+#define SQUELCH_DISABLE                   BIT(5)
+#define PAD_VDDO_SHIFT                    (2)
+#define PAD_VDDO_MASK                     (0x7)
+#define PAD_CMOSDRV_SHIFT                 (0)
+#define PAD_CMOSDRV_MASK                  (0x3)
+
+/* Bit definitions for the TOD_CFG register */
+#define TOD_EVEN_PPS_MODE                 BIT(2)
+#define TOD_OUT_SYNC_ENABLE               BIT(1)
+#define TOD_ENABLE                        BIT(0)
+
+/* Bit definitions for the TOD_WRITE_SELECT_CFG_0 register */
+#define WR_PWM_DECODER_INDEX_SHIFT        (4)
+#define WR_PWM_DECODER_INDEX_MASK         (0xf)
+#define WR_REF_INDEX_SHIFT                (0)
+#define WR_REF_INDEX_MASK                 (0xf)
+
+/* Bit definitions for the TOD_WRITE_CMD register */
+#define TOD_WRITE_SELECTION_SHIFT         (0)
+#define TOD_WRITE_SELECTION_MASK          (0xf)
+/* 4.8.7 */
+#define TOD_WRITE_TYPE_SHIFT              (4)
+#define TOD_WRITE_TYPE_MASK               (0x3)
+
+/* Bit definitions for the TOD_READ_PRIMARY_SEL_CFG_0 register */
+#define RD_PWM_DECODER_INDEX_SHIFT        (4)
+#define RD_PWM_DECODER_INDEX_MASK         (0xf)
+#define RD_REF_INDEX_SHIFT                (0)
+#define RD_REF_INDEX_MASK                 (0xf)
+
+/* Bit definitions for the TOD_READ_PRIMARY_CMD register */
+#define TOD_READ_TRIGGER_MODE             BIT(4)
+#define TOD_READ_TRIGGER_SHIFT            (0)
+#define TOD_READ_TRIGGER_MASK             (0xf)
+
+/* Bit definitions for the DPLL_CTRL_COMBO_MASTER_CFG register */
+#define COMBO_MASTER_HOLD                 BIT(0)
+
+/* Bit definitions for DPLL_SYS_STATUS register */
+#define DPLL_SYS_STATE_MASK               (0xf)
+
+/* Bit definitions for SYS_APLL_STATUS register */
+#define SYS_APLL_LOSS_LOCK_LIVE_MASK       BIT(0)
+#define SYS_APLL_LOSS_LOCK_LIVE_LOCKED     0
+#define SYS_APLL_LOSS_LOCK_LIVE_UNLOCKED   1
+
+/* Bit definitions for the DPLL0_STATUS register */
+#define DPLL_STATE_MASK                   (0xf)
+#define DPLL_STATE_SHIFT                  (0x0)
+
+/* Values of DPLL_N.DPLL_MODE.PLL_MODE */
+enum pll_mode {
+	PLL_MODE_MIN = 0,
+	PLL_MODE_NORMAL = PLL_MODE_MIN,
+	PLL_MODE_WRITE_PHASE = 1,
+	PLL_MODE_WRITE_FREQUENCY = 2,
+	PLL_MODE_GPIO_INC_DEC = 3,
+	PLL_MODE_SYNTHESIS = 4,
+	PLL_MODE_PHASE_MEASUREMENT = 5,
+	PLL_MODE_DISABLED = 6,
+	PLL_MODE_MAX = PLL_MODE_DISABLED,
+};
+
+enum hw_tod_write_trig_sel {
+	HW_TOD_WR_TRIG_SEL_MIN = 0,
+	HW_TOD_WR_TRIG_SEL_MSB = HW_TOD_WR_TRIG_SEL_MIN,
+	HW_TOD_WR_TRIG_SEL_RESERVED = 1,
+	HW_TOD_WR_TRIG_SEL_TOD_PPS = 2,
+	HW_TOD_WR_TRIG_SEL_IRIGB_PPS = 3,
+	HW_TOD_WR_TRIG_SEL_PWM_PPS = 4,
+	HW_TOD_WR_TRIG_SEL_GPIO = 5,
+	HW_TOD_WR_TRIG_SEL_FOD_SYNC = 6,
+	WR_TRIG_SEL_MAX = HW_TOD_WR_TRIG_SEL_FOD_SYNC,
+};
+
+enum scsr_read_trig_sel {
+	/* CANCEL CURRENT TOD READ; MODULE BECOMES IDLE - NO TRIGGER OCCURS */
+	SCSR_TOD_READ_TRIG_SEL_DISABLE = 0,
+	/* TRIGGER IMMEDIATELY */
+	SCSR_TOD_READ_TRIG_SEL_IMMEDIATE = 1,
+	/* TRIGGER ON RISING EDGE OF INTERNAL TOD PPS SIGNAL */
+	SCSR_TOD_READ_TRIG_SEL_TODPPS = 2,
+	/* TRGGER ON RISING EDGE OF SELECTED REFERENCE INPUT */
+	SCSR_TOD_READ_TRIG_SEL_REFCLK = 3,
+	/* TRIGGER ON RISING EDGE OF SELECTED PWM DECODER 1PPS OUTPUT */
+	SCSR_TOD_READ_TRIG_SEL_PWMPPS = 4,
+	SCSR_TOD_READ_TRIG_SEL_RESERVED = 5,
+	/* TRIGGER WHEN WRITE FREQUENCY EVENT OCCURS  */
+	SCSR_TOD_READ_TRIG_SEL_WRITEFREQUENCYEVENT = 6,
+	/* TRIGGER ON SELECTED GPIO */
+	SCSR_TOD_READ_TRIG_SEL_GPIO = 7,
+	SCSR_TOD_READ_TRIG_SEL_MAX = SCSR_TOD_READ_TRIG_SEL_GPIO,
+};
+
+/* Values STATUS.DPLL_SYS_STATUS.DPLL_SYS_STATE */
+enum dpll_state {
+	DPLL_STATE_MIN = 0,
+	DPLL_STATE_FREERUN = DPLL_STATE_MIN,
+	DPLL_STATE_LOCKACQ = 1,
+	DPLL_STATE_LOCKREC = 2,
+	DPLL_STATE_LOCKED = 3,
+	DPLL_STATE_HOLDOVER = 4,
+	DPLL_STATE_OPEN_LOOP = 5,
+	DPLL_STATE_MAX = DPLL_STATE_OPEN_LOOP,
+};
+
+/* 4.8.7 only */
+enum scsr_tod_write_trig_sel {
+	SCSR_TOD_WR_TRIG_SEL_DISABLE = 0,
+	SCSR_TOD_WR_TRIG_SEL_IMMEDIATE = 1,
+	SCSR_TOD_WR_TRIG_SEL_REFCLK = 2,
+	SCSR_TOD_WR_TRIG_SEL_PWMPPS = 3,
+	SCSR_TOD_WR_TRIG_SEL_TODPPS = 4,
+	SCSR_TOD_WR_TRIG_SEL_SYNCFOD = 5,
+	SCSR_TOD_WR_TRIG_SEL_GPIO = 6,
+	SCSR_TOD_WR_TRIG_SEL_MAX = SCSR_TOD_WR_TRIG_SEL_GPIO,
+};
+
+/* 4.8.7 only */
+enum scsr_tod_write_type_sel {
+	SCSR_TOD_WR_TYPE_SEL_ABSOLUTE = 0,
+	SCSR_TOD_WR_TYPE_SEL_DELTA_PLUS = 1,
+	SCSR_TOD_WR_TYPE_SEL_DELTA_MINUS = 2,
+	SCSR_TOD_WR_TYPE_SEL_MAX = SCSR_TOD_WR_TYPE_SEL_DELTA_MINUS,
+};
+#endif
diff --git a/include/linux/mfd/rsmu.h b/include/linux/mfd/rsmu.h
new file mode 100644
index 000000000000..6870de608233
--- /dev/null
+++ b/include/linux/mfd/rsmu.h
@@ -0,0 +1,36 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Core interface for Renesas Synchronization Management Unit (SMU) devices.
+ *
+ * Copyright (C) 2021 Integrated Device Technology, Inc., a Renesas Company.
+ */
+
+#ifndef __LINUX_MFD_RSMU_H
+#define __LINUX_MFD_RSMU_H
+
+/* The supported devices are ClockMatrix, Sabre and SnowLotus */
+enum rsmu_type {
+	RSMU_CM		= 0x34000,
+	RSMU_SABRE	= 0x33810,
+	RSMU_SL		= 0x19850,
+};
+
+/**
+ *
+ * struct rsmu_ddata - device data structure for sub devices.
+ *
+ * @dev:    i2c/spi device.
+ * @regmap: i2c/spi bus access.
+ * @lock:   mutex used by sub devices to make sure a series of
+ *          bus access requests are not interrupted.
+ * @type:   RSMU device type.
+ * @page:   i2c/spi bus driver internal use only.
+ */
+struct rsmu_ddata {
+	struct device *dev;
+	struct regmap *regmap;
+	struct mutex lock;
+	enum rsmu_type type;
+	u16 page;
+};
+#endif /*  __LINUX_MFD_RSMU_H */