Merge branch 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull irq core updates from Thomas Gleixner:
 "A rather large update for the interrupt core code and the irq chip drivers:

   - Add a new bitmap matrix allocator and supporting changes, which is
     used to replace the x86 vector allocator which comes with separate
     pull request. This allows to replace the convoluted nested loop
     allocation function in x86 with a facility which supports the
     recently added property of managed interrupts proper and allows to
     switch to a best effort vector reservation scheme, which addresses
     problems with vector exhaustion.

   - A large update to the ARM GIC-V3-ITS driver adding support for
     range selectors.

   - New interrupt controllers:
       - Meson and Meson8 GPIO
       - BCM7271 L2
       - Socionext EXIU

     If you expected that this will stop at some point, I have to
     disappoint you. There are new ones posted already. Sigh!

   - STM32 interrupt controller support for new platforms.

   - A pile of fixes, cleanups and updates to the MIPS GIC driver

   - The usual small fixes, cleanups and updates all over the place.
     Most visible one is to move the irq chip drivers Kconfig switches
     into a separate Kconfig menu"

* 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (70 commits)
  genirq: Fix type of shifting literal 1 in __setup_irq()
  irqdomain: Drop pointless NULL check in virq_debug_show_one
  genirq/proc: Return proper error code when irq_set_affinity() fails
  irq/work: Use llist_for_each_entry_safe
  irqchip: mips-gic: Print warning if inherited GIC base is used
  irqchip/mips-gic: Add pr_fmt and reword pr_* messages
  irqchip/stm32: Move the wakeup on interrupt mask
  irqchip/stm32: Fix initial values
  irqchip/stm32: Add stm32h7 support
  dt-bindings/interrupt-controllers: Add compatible string for stm32h7
  irqchip/stm32: Add multi-bank management
  irqchip/stm32: Select GENERIC_IRQ_CHIP
  irqchip/exiu: Add support for Socionext Synquacer EXIU controller
  dt-bindings: Add description of Socionext EXIU interrupt controller
  irqchip/gic-v3-its: Fix VPE activate callback return value
  irqchip: mips-gic: Make IPI bitmaps static
  irqchip: mips-gic: Share register writes in gic_set_type()
  irqchip: mips-gic: Remove gic_vpes variable
  irqchip: mips-gic: Use num_possible_cpus() to reserve IPIs
  irqchip: mips-gic: Configure EIC when CPUs come online
  ...

3 files changed, 13 insertions, 2 deletions

diff --git a/include/linux/irqchip/arm-gic-v3.h b/include/linux/irqchip/arm-gic-v3.h
index 14b74f22d43c..c00c4c33e432 100644
--- a/include/linux/irqchip/arm-gic-v3.h
+++ b/include/linux/irqchip/arm-gic-v3.h
@@ -68,6 +68,7 @@
 #define GICD_CTLR_ENABLE_SS_G1		(1U << 1)
 #define GICD_CTLR_ENABLE_SS_G0		(1U << 0)
 
+#define GICD_TYPER_RSS			(1U << 26)
 #define GICD_TYPER_LPIS			(1U << 17)
 #define GICD_TYPER_MBIS			(1U << 16)
 
@@ -461,6 +462,7 @@
 #define ICC_CTLR_EL1_SEIS_MASK		(0x1 << ICC_CTLR_EL1_SEIS_SHIFT)
 #define ICC_CTLR_EL1_A3V_SHIFT		15
 #define ICC_CTLR_EL1_A3V_MASK		(0x1 << ICC_CTLR_EL1_A3V_SHIFT)
+#define ICC_CTLR_EL1_RSS		(0x1 << 18)
 #define ICC_PMR_EL1_SHIFT		0
 #define ICC_PMR_EL1_MASK		(0xff << ICC_PMR_EL1_SHIFT)
 #define ICC_BPR0_EL1_SHIFT		0
@@ -549,6 +551,8 @@
 #define ICC_SGI1R_AFFINITY_2_SHIFT	32
 #define ICC_SGI1R_AFFINITY_2_MASK	(0xffULL << ICC_SGI1R_AFFINITY_2_SHIFT)
 #define ICC_SGI1R_IRQ_ROUTING_MODE_BIT	40
+#define ICC_SGI1R_RS_SHIFT		44
+#define ICC_SGI1R_RS_MASK		(0xfULL << ICC_SGI1R_RS_SHIFT)
 #define ICC_SGI1R_AFFINITY_3_SHIFT	48
 #define ICC_SGI1R_AFFINITY_3_MASK	(0xffULL << ICC_SGI1R_AFFINITY_3_SHIFT)
 
diff --git a/include/linux/irqchip/arm-gic-v4.h b/include/linux/irqchip/arm-gic-v4.h
index 58a4d89aa82c..447da8ca2156 100644
--- a/include/linux/irqchip/arm-gic-v4.h
+++ b/include/linux/irqchip/arm-gic-v4.h
@@ -20,6 +20,12 @@
 
 struct its_vpe;
 
+/*
+ * Maximum number of ITTs when GITS_TYPER.VMOVP == 0, using the
+ * ITSList mechanism to perform inter-ITS synchronization.
+ */
+#define GICv4_ITS_LIST_MAX		16
+
 /* Embedded in kvm.arch */
 struct its_vm {
 	struct fwnode_handle	*fwnode;
@@ -30,6 +36,7 @@ struct its_vm {
 	irq_hw_number_t		db_lpi_base;
 	unsigned long		*db_bitmap;
 	int			nr_db_lpis;
+	u32			vlpi_count[GICv4_ITS_LIST_MAX];
 };
 
 /* Embedded in kvm_vcpu.arch */
@@ -64,12 +71,14 @@ struct its_vpe {
  * @vm:		Pointer to the GICv4 notion of a VM
  * @vpe:	Pointer to the GICv4 notion of a virtual CPU (VPE)
  * @vintid:	Virtual LPI number
+ * @properties:	Priority and enable bits (as written in the prop table)
  * @db_enabled:	Is the VPE doorbell to be generated?
  */
 struct its_vlpi_map {
 	struct its_vm		*vm;
 	struct its_vpe		*vpe;
 	u32			vintid;
+	u8			properties;
 	bool			db_enabled;
 };
 
diff --git a/include/linux/irqchip/irq-omap-intc.h b/include/linux/irqchip/irq-omap-intc.h
index 2e3d1afeb674..f19ccee7749f 100644
--- a/include/linux/irqchip/irq-omap-intc.h
+++ b/include/linux/irqchip/irq-omap-intc.h
@@ -18,8 +18,6 @@
 #ifndef __INCLUDE_LINUX_IRQCHIP_IRQ_OMAP_INTC_H
 #define __INCLUDE_LINUX_IRQCHIP_IRQ_OMAP_INTC_H
 
-void omap3_init_irq(void);
-
 int omap_irq_pending(void);
 void omap_intc_save_context(void);
 void omap_intc_restore_context(void);