summaryrefslogtreecommitdiff
path: root/include/linux/irq.h
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@ppc970.osdl.org>2005-04-16 15:20:36 -0700
committerLinus Torvalds <torvalds@ppc970.osdl.org>2005-04-16 15:20:36 -0700
commit1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 (patch)
tree0bba044c4ce775e45a88a51686b5d9f90697ea9d /include/linux/irq.h
Linux-2.6.12-rc2v2.6.12-rc2
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
Diffstat (limited to 'include/linux/irq.h')
-rw-r--r--include/linux/irq.h97
1 files changed, 97 insertions, 0 deletions
diff --git a/include/linux/irq.h b/include/linux/irq.h
new file mode 100644
index 000000000000..c3ff4d101667
--- /dev/null
+++ b/include/linux/irq.h
@@ -0,0 +1,97 @@
+#ifndef __irq_h
+#define __irq_h
+
+/*
+ * Please do not include this file in generic code. There is currently
+ * no requirement for any architecture to implement anything held
+ * within this file.
+ *
+ * Thanks. --rmk
+ */
+
+#include <linux/config.h>
+
+#if !defined(CONFIG_ARCH_S390)
+
+#include <linux/linkage.h>
+#include <linux/cache.h>
+#include <linux/spinlock.h>
+#include <linux/cpumask.h>
+
+#include <asm/irq.h>
+#include <asm/ptrace.h>
+
+/*
+ * IRQ line status.
+ */
+#define IRQ_INPROGRESS 1 /* IRQ handler active - do not enter! */
+#define IRQ_DISABLED 2 /* IRQ disabled - do not enter! */
+#define IRQ_PENDING 4 /* IRQ pending - replay on enable */
+#define IRQ_REPLAY 8 /* IRQ has been replayed but not acked yet */
+#define IRQ_AUTODETECT 16 /* IRQ is being autodetected */
+#define IRQ_WAITING 32 /* IRQ not yet seen - for autodetection */
+#define IRQ_LEVEL 64 /* IRQ level triggered */
+#define IRQ_MASKED 128 /* IRQ masked - shouldn't be seen again */
+#define IRQ_PER_CPU 256 /* IRQ is per CPU */
+
+/*
+ * Interrupt controller descriptor. This is all we need
+ * to describe about the low-level hardware.
+ */
+struct hw_interrupt_type {
+ const char * typename;
+ unsigned int (*startup)(unsigned int irq);
+ void (*shutdown)(unsigned int irq);
+ void (*enable)(unsigned int irq);
+ void (*disable)(unsigned int irq);
+ void (*ack)(unsigned int irq);
+ void (*end)(unsigned int irq);
+ void (*set_affinity)(unsigned int irq, cpumask_t dest);
+};
+
+typedef struct hw_interrupt_type hw_irq_controller;
+
+/*
+ * This is the "IRQ descriptor", which contains various information
+ * about the irq, including what kind of hardware handling it has,
+ * whether it is disabled etc etc.
+ *
+ * Pad this out to 32 bytes for cache and indexing reasons.
+ */
+typedef struct irq_desc {
+ hw_irq_controller *handler;
+ void *handler_data;
+ struct irqaction *action; /* IRQ action list */
+ unsigned int status; /* IRQ status */
+ unsigned int depth; /* nested irq disables */
+ unsigned int irq_count; /* For detecting broken interrupts */
+ unsigned int irqs_unhandled;
+ spinlock_t lock;
+} ____cacheline_aligned irq_desc_t;
+
+extern irq_desc_t irq_desc [NR_IRQS];
+
+#include <asm/hw_irq.h> /* the arch dependent stuff */
+
+extern int setup_irq(unsigned int irq, struct irqaction * new);
+
+#ifdef CONFIG_GENERIC_HARDIRQS
+extern cpumask_t irq_affinity[NR_IRQS];
+extern int no_irq_affinity;
+extern int noirqdebug_setup(char *str);
+
+extern fastcall int handle_IRQ_event(unsigned int irq, struct pt_regs *regs,
+ struct irqaction *action);
+extern fastcall unsigned int __do_IRQ(unsigned int irq, struct pt_regs *regs);
+extern void note_interrupt(unsigned int irq, irq_desc_t *desc, int action_ret);
+extern void report_bad_irq(unsigned int irq, irq_desc_t *desc, int action_ret);
+extern int can_request_irq(unsigned int irq, unsigned long irqflags);
+
+extern void init_irq_proc(void);
+#endif
+
+extern hw_irq_controller no_irq_type; /* needed in every arch ? */
+
+#endif
+
+#endif /* __irq_h */