iommu: Move iommu fault data to linux/iommu.h

The iommu fault data is currently defined in uapi/linux/iommu.h, but is
only used inside the iommu subsystem. Move it to linux/iommu.h, where it
will be more accessible to kernel drivers.

With this done, uapi/linux/iommu.h becomes empty and can be removed from
the tree.

Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Yi Liu <yi.l.liu@intel.com>
Tested-by: Yan Zhao <yan.y.zhao@intel.com>
Tested-by: Longfang Liu <liulongfang@huawei.com>
Link: https://lore.kernel.org/r/20240212012227.119381-2-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>

1 files changed, 151 insertions, 1 deletions

diff --git a/include/linux/iommu.h b/include/linux/iommu.h
index 1ea2a820e1eb..472a8ce029b1 100644
--- a/include/linux/iommu.h
+++ b/include/linux/iommu.h
@@ -14,7 +14,6 @@
 #include <linux/err.h>
 #include <linux/of.h>
 #include <linux/iova_bitmap.h>
-#include <uapi/linux/iommu.h>
 
 #define IOMMU_READ	(1 << 0)
 #define IOMMU_WRITE	(1 << 1)
@@ -44,6 +43,157 @@ struct iommu_sva;
 struct iommu_fault_event;
 struct iommu_dma_cookie;
 
+#define IOMMU_FAULT_PERM_READ	(1 << 0) /* read */
+#define IOMMU_FAULT_PERM_WRITE	(1 << 1) /* write */
+#define IOMMU_FAULT_PERM_EXEC	(1 << 2) /* exec */
+#define IOMMU_FAULT_PERM_PRIV	(1 << 3) /* privileged */
+
+/* Generic fault types, can be expanded IRQ remapping fault */
+enum iommu_fault_type {
+	IOMMU_FAULT_DMA_UNRECOV = 1,	/* unrecoverable fault */
+	IOMMU_FAULT_PAGE_REQ,		/* page request fault */
+};
+
+enum iommu_fault_reason {
+	IOMMU_FAULT_REASON_UNKNOWN = 0,
+
+	/* Could not access the PASID table (fetch caused external abort) */
+	IOMMU_FAULT_REASON_PASID_FETCH,
+
+	/* PASID entry is invalid or has configuration errors */
+	IOMMU_FAULT_REASON_BAD_PASID_ENTRY,
+
+	/*
+	 * PASID is out of range (e.g. exceeds the maximum PASID
+	 * supported by the IOMMU) or disabled.
+	 */
+	IOMMU_FAULT_REASON_PASID_INVALID,
+
+	/*
+	 * An external abort occurred fetching (or updating) a translation
+	 * table descriptor
+	 */
+	IOMMU_FAULT_REASON_WALK_EABT,
+
+	/*
+	 * Could not access the page table entry (Bad address),
+	 * actual translation fault
+	 */
+	IOMMU_FAULT_REASON_PTE_FETCH,
+
+	/* Protection flag check failed */
+	IOMMU_FAULT_REASON_PERMISSION,
+
+	/* access flag check failed */
+	IOMMU_FAULT_REASON_ACCESS,
+
+	/* Output address of a translation stage caused Address Size fault */
+	IOMMU_FAULT_REASON_OOR_ADDRESS,
+};
+
+/**
+ * struct iommu_fault_unrecoverable - Unrecoverable fault data
+ * @reason: reason of the fault, from &enum iommu_fault_reason
+ * @flags: parameters of this fault (IOMMU_FAULT_UNRECOV_* values)
+ * @pasid: Process Address Space ID
+ * @perm: requested permission access using by the incoming transaction
+ *        (IOMMU_FAULT_PERM_* values)
+ * @addr: offending page address
+ * @fetch_addr: address that caused a fetch abort, if any
+ */
+struct iommu_fault_unrecoverable {
+	__u32	reason;
+#define IOMMU_FAULT_UNRECOV_PASID_VALID		(1 << 0)
+#define IOMMU_FAULT_UNRECOV_ADDR_VALID		(1 << 1)
+#define IOMMU_FAULT_UNRECOV_FETCH_ADDR_VALID	(1 << 2)
+	__u32	flags;
+	__u32	pasid;
+	__u32	perm;
+	__u64	addr;
+	__u64	fetch_addr;
+};
+
+/**
+ * struct iommu_fault_page_request - Page Request data
+ * @flags: encodes whether the corresponding fields are valid and whether this
+ *         is the last page in group (IOMMU_FAULT_PAGE_REQUEST_* values).
+ *         When IOMMU_FAULT_PAGE_RESPONSE_NEEDS_PASID is set, the page response
+ *         must have the same PASID value as the page request. When it is clear,
+ *         the page response should not have a PASID.
+ * @pasid: Process Address Space ID
+ * @grpid: Page Request Group Index
+ * @perm: requested page permissions (IOMMU_FAULT_PERM_* values)
+ * @addr: page address
+ * @private_data: device-specific private information
+ */
+struct iommu_fault_page_request {
+#define IOMMU_FAULT_PAGE_REQUEST_PASID_VALID	(1 << 0)
+#define IOMMU_FAULT_PAGE_REQUEST_LAST_PAGE	(1 << 1)
+#define IOMMU_FAULT_PAGE_REQUEST_PRIV_DATA	(1 << 2)
+#define IOMMU_FAULT_PAGE_RESPONSE_NEEDS_PASID	(1 << 3)
+	__u32	flags;
+	__u32	pasid;
+	__u32	grpid;
+	__u32	perm;
+	__u64	addr;
+	__u64	private_data[2];
+};
+
+/**
+ * struct iommu_fault - Generic fault data
+ * @type: fault type from &enum iommu_fault_type
+ * @padding: reserved for future use (should be zero)
+ * @event: fault event, when @type is %IOMMU_FAULT_DMA_UNRECOV
+ * @prm: Page Request message, when @type is %IOMMU_FAULT_PAGE_REQ
+ * @padding2: sets the fault size to allow for future extensions
+ */
+struct iommu_fault {
+	__u32	type;
+	__u32	padding;
+	union {
+		struct iommu_fault_unrecoverable event;
+		struct iommu_fault_page_request prm;
+		__u8 padding2[56];
+	};
+};
+
+/**
+ * enum iommu_page_response_code - Return status of fault handlers
+ * @IOMMU_PAGE_RESP_SUCCESS: Fault has been handled and the page tables
+ *	populated, retry the access. This is "Success" in PCI PRI.
+ * @IOMMU_PAGE_RESP_FAILURE: General error. Drop all subsequent faults from
+ *	this device if possible. This is "Response Failure" in PCI PRI.
+ * @IOMMU_PAGE_RESP_INVALID: Could not handle this fault, don't retry the
+ *	access. This is "Invalid Request" in PCI PRI.
+ */
+enum iommu_page_response_code {
+	IOMMU_PAGE_RESP_SUCCESS = 0,
+	IOMMU_PAGE_RESP_INVALID,
+	IOMMU_PAGE_RESP_FAILURE,
+};
+
+/**
+ * struct iommu_page_response - Generic page response information
+ * @argsz: User filled size of this data
+ * @version: API version of this structure
+ * @flags: encodes whether the corresponding fields are valid
+ *         (IOMMU_FAULT_PAGE_RESPONSE_* values)
+ * @pasid: Process Address Space ID
+ * @grpid: Page Request Group Index
+ * @code: response code from &enum iommu_page_response_code
+ */
+struct iommu_page_response {
+	__u32	argsz;
+#define IOMMU_PAGE_RESP_VERSION_1	1
+	__u32	version;
+#define IOMMU_PAGE_RESP_PASID_VALID	(1 << 0)
+	__u32	flags;
+	__u32	pasid;
+	__u32	grpid;
+	__u32	code;
+};
+
+
 /* iommu fault flags */
 #define IOMMU_FAULT_READ	0x0
 #define IOMMU_FAULT_WRITE	0x1