video: fbdev: amba-clcd: Retire elder CLCD driver

All the functionality in this driver has been reimplemented
in the new DRM driver in drivers/gpu/drm/pl111/* and all
the boards using it have been migrated to use the DRM driver
with all configuration coming from the device tree.

I started the work to migrate the CLCD driver to DRM in
april 2017 and it took a little more than 3 years to do this
properly without leaving any platforms behind.

Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Cc: Russell King <linux@armlinux.org.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200609200446.153209-2-linus.walleij@linaro.org

1 files changed, 0 insertions, 290 deletions

diff --git a/include/linux/amba/clcd.h b/include/linux/amba/clcd.h
deleted file mode 100644
index b6e0cbeaf533..000000000000
--- a/include/linux/amba/clcd.h
+++ /dev/null
@@ -1,290 +0,0 @@
-/*
- * linux/include/asm-arm/hardware/amba_clcd.h -- Integrator LCD panel.
- *
- * David A Rusling
- *
- * Copyright (C) 2001 ARM Limited
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file COPYING in the main directory of this archive
- * for more details.
- */
-#include <linux/fb.h>
-#include <linux/amba/clcd-regs.h>
-
-enum {
-	/* individual formats */
-	CLCD_CAP_RGB444		= (1 << 0),
-	CLCD_CAP_RGB5551	= (1 << 1),
-	CLCD_CAP_RGB565		= (1 << 2),
-	CLCD_CAP_RGB888		= (1 << 3),
-	CLCD_CAP_BGR444		= (1 << 4),
-	CLCD_CAP_BGR5551	= (1 << 5),
-	CLCD_CAP_BGR565		= (1 << 6),
-	CLCD_CAP_BGR888		= (1 << 7),
-
-	/* connection layouts */
-	CLCD_CAP_444		= CLCD_CAP_RGB444 | CLCD_CAP_BGR444,
-	CLCD_CAP_5551		= CLCD_CAP_RGB5551 | CLCD_CAP_BGR5551,
-	CLCD_CAP_565		= CLCD_CAP_RGB565 | CLCD_CAP_BGR565,
-	CLCD_CAP_888		= CLCD_CAP_RGB888 | CLCD_CAP_BGR888,
-
-	/* red/blue ordering */
-	CLCD_CAP_RGB		= CLCD_CAP_RGB444 | CLCD_CAP_RGB5551 |
-				  CLCD_CAP_RGB565 | CLCD_CAP_RGB888,
-	CLCD_CAP_BGR		= CLCD_CAP_BGR444 | CLCD_CAP_BGR5551 |
-				  CLCD_CAP_BGR565 | CLCD_CAP_BGR888,
-
-	CLCD_CAP_ALL		= CLCD_CAP_BGR | CLCD_CAP_RGB,
-};
-
-struct backlight_device;
-
-struct clcd_panel {
-	struct fb_videomode	mode;
-	signed short		width;	/* width in mm */
-	signed short		height;	/* height in mm */
-	u32			tim2;
-	u32			tim3;
-	u32			cntl;
-	u32			caps;
-	unsigned int		bpp:8,
-				fixedtimings:1,
-				grayscale:1;
-	unsigned int		connector;
-	struct backlight_device	*backlight;
-	/*
-	 * If the B/R lines are switched between the CLCD
-	 * and the panel we need to know this and not try to
-	 * compensate with the BGR bit in the control register.
-	 */
-	bool			bgr_connection;
-};
-
-struct clcd_regs {
-	u32			tim0;
-	u32			tim1;
-	u32			tim2;
-	u32			tim3;
-	u32			cntl;
-	unsigned long		pixclock;
-};
-
-struct clcd_fb;
-
-/*
- * the board-type specific routines
- */
-struct clcd_board {
-	const char *name;
-
-	/*
-	 * Optional.  Hardware capability flags.
-	 */
-	u32	caps;
-
-	/*
-	 * Optional.  Check whether the var structure is acceptable
-	 * for this display.
-	 */
-	int	(*check)(struct clcd_fb *fb, struct fb_var_screeninfo *var);
-
-	/*
-	 * Compulsory.  Decode fb->fb.var into regs->*.  In the case of
-	 * fixed timing, set regs->* to the register values required.
-	 */
-	void	(*decode)(struct clcd_fb *fb, struct clcd_regs *regs);
-
-	/*
-	 * Optional.  Disable any extra display hardware.
-	 */
-	void	(*disable)(struct clcd_fb *);
-
-	/*
-	 * Optional.  Enable any extra display hardware.
-	 */
-	void	(*enable)(struct clcd_fb *);
-
-	/*
-	 * Setup platform specific parts of CLCD driver
-	 */
-	int	(*setup)(struct clcd_fb *);
-
-	/*
-	 * mmap the framebuffer memory
-	 */
-	int	(*mmap)(struct clcd_fb *, struct vm_area_struct *);
-
-	/*
-	 * Remove platform specific parts of CLCD driver
-	 */
-	void	(*remove)(struct clcd_fb *);
-};
-
-struct amba_device;
-struct clk;
-
-/* this data structure describes each frame buffer device we find */
-struct clcd_fb {
-	struct fb_info		fb;
-	struct amba_device	*dev;
-	struct clk		*clk;
-	struct clcd_panel	*panel;
-	struct clcd_board	*board;
-	void			*board_data;
-	void __iomem		*regs;
-	u16			off_ienb;
-	u16			off_cntl;
-	u32			clcd_cntl;
-	u32			cmap[16];
-	bool			clk_enabled;
-};
-
-static inline void clcdfb_decode(struct clcd_fb *fb, struct clcd_regs *regs)
-{
-	struct fb_var_screeninfo *var = &fb->fb.var;
-	u32 val, cpl;
-
-	/*
-	 * Program the CLCD controller registers and start the CLCD
-	 */
-	val = ((var->xres / 16) - 1) << 2;
-	val |= (var->hsync_len - 1) << 8;
-	val |= (var->right_margin - 1) << 16;
-	val |= (var->left_margin - 1) << 24;
-	regs->tim0 = val;
-
-	val = var->yres;
-	if (fb->panel->cntl & CNTL_LCDDUAL)
-		val /= 2;
-	val -= 1;
-	val |= (var->vsync_len - 1) << 10;
-	val |= var->lower_margin << 16;
-	val |= var->upper_margin << 24;
-	regs->tim1 = val;
-
-	val = fb->panel->tim2;
-	val |= var->sync & FB_SYNC_HOR_HIGH_ACT  ? 0 : TIM2_IHS;
-	val |= var->sync & FB_SYNC_VERT_HIGH_ACT ? 0 : TIM2_IVS;
-
-	cpl = var->xres_virtual;
-	if (fb->panel->cntl & CNTL_LCDTFT)	  /* TFT */
-		/* / 1 */;
-	else if (!var->grayscale)		  /* STN color */
-		cpl = cpl * 8 / 3;
-	else if (fb->panel->cntl & CNTL_LCDMONO8) /* STN monochrome, 8bit */
-		cpl /= 8;
-	else					  /* STN monochrome, 4bit */
-		cpl /= 4;
-
-	regs->tim2 = val | ((cpl - 1) << 16);
-
-	regs->tim3 = fb->panel->tim3;
-
-	val = fb->panel->cntl;
-	if (var->grayscale)
-		val |= CNTL_LCDBW;
-
-	if (fb->panel->caps && fb->board->caps && var->bits_per_pixel >= 16) {
-		/*
-		 * if board and panel supply capabilities, we can support
-		 * changing BGR/RGB depending on supplied parameters. Here
-		 * we switch to what the framebuffer is providing if need
-		 * be, so if the framebuffer is BGR but the display connection
-		 * is RGB (first case) we switch it around. Vice versa mutatis
-		 * mutandis if the framebuffer is RGB but the display connection
-		 * is BGR, we flip it around.
-		 */
-		if (var->red.offset == 0)
-			val &= ~CNTL_BGR;
-		else
-			val |= CNTL_BGR;
-		if (fb->panel->bgr_connection)
-			val ^= CNTL_BGR;
-	}
-
-	switch (var->bits_per_pixel) {
-	case 1:
-		val |= CNTL_LCDBPP1;
-		break;
-	case 2:
-		val |= CNTL_LCDBPP2;
-		break;
-	case 4:
-		val |= CNTL_LCDBPP4;
-		break;
-	case 8:
-		val |= CNTL_LCDBPP8;
-		break;
-	case 16:
-		/*
-		 * PL110 cannot choose between 5551 and 565 modes in its
-		 * control register.  It is possible to use 565 with
-		 * custom external wiring.
-		 */
-		if (amba_part(fb->dev) == 0x110 ||
-		    var->green.length == 5)
-			val |= CNTL_LCDBPP16;
-		else if (var->green.length == 6)
-			val |= CNTL_LCDBPP16_565;
-		else
-			val |= CNTL_LCDBPP16_444;
-		break;
-	case 32:
-		val |= CNTL_LCDBPP24;
-		break;
-	}
-
-	regs->cntl = val;
-	regs->pixclock = var->pixclock;
-}
-
-static inline int clcdfb_check(struct clcd_fb *fb, struct fb_var_screeninfo *var)
-{
-	var->xres_virtual = var->xres = (var->xres + 15) & ~15;
-	var->yres_virtual = var->yres = (var->yres + 1) & ~1;
-
-#define CHECK(e,l,h) (var->e < l || var->e > h)
-	if (CHECK(right_margin, (5+1), 256) ||	/* back porch */
-	    CHECK(left_margin, (5+1), 256) ||	/* front porch */
-	    CHECK(hsync_len, (5+1), 256) ||
-	    var->xres > 4096 ||
-	    var->lower_margin > 255 ||		/* back porch */
-	    var->upper_margin > 255 ||		/* front porch */
-	    var->vsync_len > 32 ||
-	    var->yres > 1024)
-		return -EINVAL;
-#undef CHECK
-
-	/* single panel mode: PCD = max(PCD, 1) */
-	/* dual panel mode: PCD = max(PCD, 5) */
-
-	/*
-	 * You can't change the grayscale setting, and
-	 * we can only do non-interlaced video.
-	 */
-	if (var->grayscale != fb->fb.var.grayscale ||
-	    (var->vmode & FB_VMODE_MASK) != FB_VMODE_NONINTERLACED)
-		return -EINVAL;
-
-#define CHECK(e) (var->e != fb->fb.var.e)
-	if (fb->panel->fixedtimings &&
-	    (CHECK(xres)		||
-	     CHECK(yres)		||
-	     CHECK(bits_per_pixel)	||
-	     CHECK(pixclock)		||
-	     CHECK(left_margin)		||
-	     CHECK(right_margin)	||
-	     CHECK(upper_margin)	||
-	     CHECK(lower_margin)	||
-	     CHECK(hsync_len)		||
-	     CHECK(vsync_len)		||
-	     CHECK(sync)))
-		return -EINVAL;
-#undef CHECK
-
-	var->nonstd = 0;
-	var->accel_flags = 0;
-
-	return 0;
-}