Merge branch 'drm-intel-fixes' of git://people.freedesktop.org/~danvet/drm-intel into drm-next

Daniel writes:

Bigger -fixes pile, mostly because I've included Ajax' DP dongle stuff,
as discussed on irc. Otherwise just small things:
- regression fix to finally make 6bpc auto-dither on dp work (Jani)
- reinstate an snb ctx w/a that accidentally got lost in a rework (Chris)
- fixup the DP train sequence, logic-goof-up uncovered by Coverty (Chris)
- fix set_caching locking (Ben)
- fix spurious segfault on con-current gtt mmap faulting (Dimitry and Mika)
- some pageflip correctness fixes (still hunting down some issues, but
  these are the worst offenders of confused code that we've tracked down
  thus far) from Chris and me
- fixup swizzling settings on vlv (Jesse)
- gt_mode w/a from Ben added, fixes snb gt1 rc6+hw ctx hangs.

* 'drm-intel-fixes' of git://people.freedesktop.org/~danvet/drm-intel:
  drm/i915: Fix GT_MODE default value
  drm/i915: don't frob the vblank ts in finish_page_flip
  drm/i915: call drm_handle_vblank before finish_page_flip
  drm/i915: print warning if vmi915_gem_fault error is not handled
  drm/i915: EBUSY status handling added to i915_gem_fault().
  drm/i915: Try harder to complete DP training pattern 1
  drm/i915: set swizzling to none on VLV
  drm/dp: Make sink count DP 1.2 aware
  drm/dp: Document DP spec versions for various DPCD registers
  drm/i915/dp: Be smarter about connection sense for branch devices
  drm/i915/dp: Fetch downstream port info if needed during DPCD fetch
  drm/dp: Update DPCD defines
  drm: Export drm_probe_ddc()
  drm/i915: Flush the pending flips on the CRTC before modification
  drm/i915: Actually invalidate the TLB for the SandyBridge HW contexts w/a
  drm/i915: Fix set_caching locking
  drm/i915: use adjusted_mode instead of mode for checking the 6bpc force flag

2 files changed, 84 insertions, 18 deletions

diff --git a/include/drm/drm_crtc.h b/include/drm/drm_crtc.h
index 1816bb31273a..3fa18b7e9497 100644
--- a/include/drm/drm_crtc.h
+++ b/include/drm/drm_crtc.h
@@ -878,6 +878,7 @@ extern char *drm_get_tv_subconnector_name(int val);
 extern char *drm_get_tv_select_name(int val);
 extern void drm_fb_release(struct drm_file *file_priv);
 extern int drm_mode_group_init_legacy_group(struct drm_device *dev, struct drm_mode_group *group);
+extern bool drm_probe_ddc(struct i2c_adapter *adapter);
 extern struct edid *drm_get_edid(struct drm_connector *connector,
 				 struct i2c_adapter *adapter);
 extern int drm_add_edid_modes(struct drm_connector *connector, struct edid *edid);
diff --git a/include/drm/drm_dp_helper.h b/include/drm/drm_dp_helper.h
index 1744b18c06b3..fe061489f91f 100644
--- a/include/drm/drm_dp_helper.h
+++ b/include/drm/drm_dp_helper.h
@@ -26,7 +26,19 @@
 #include <linux/types.h>
 #include <linux/i2c.h>
 
-/* From the VESA DisplayPort spec */
+/*
+ * Unless otherwise noted, all values are from the DP 1.1a spec.  Note that
+ * DP and DPCD versions are independent.  Differences from 1.0 are not noted,
+ * 1.0 devices basically don't exist in the wild.
+ *
+ * Abbreviations, in chronological order:
+ *
+ * eDP: Embedded DisplayPort version 1
+ * DPI: DisplayPort Interoperability Guideline v1.1a
+ * 1.2: DisplayPort 1.2
+ *
+ * 1.2 formally includes both eDP and DPI definitions.
+ */
 
 #define AUX_NATIVE_WRITE	0x8
 #define AUX_NATIVE_READ		0x9
@@ -53,7 +65,7 @@
 
 #define DP_MAX_LANE_COUNT                   0x002
 # define DP_MAX_LANE_COUNT_MASK		    0x1f
-# define DP_TPS3_SUPPORTED		    (1 << 6)
+# define DP_TPS3_SUPPORTED		    (1 << 6) /* 1.2 */
 # define DP_ENHANCED_FRAME_CAP		    (1 << 7)
 
 #define DP_MAX_DOWNSPREAD                   0x003
@@ -69,19 +81,33 @@
 /* 10b = TMDS or HDMI */
 /* 11b = Other */
 # define DP_FORMAT_CONVERSION               (1 << 3)
+# define DP_DETAILED_CAP_INFO_AVAILABLE	    (1 << 4) /* DPI */
 
 #define DP_MAIN_LINK_CHANNEL_CODING         0x006
 
 #define DP_DOWN_STREAM_PORT_COUNT	    0x007
-#define  DP_PORT_COUNT_MASK		    0x0f
-#define  DP_OUI_SUPPORT			    (1 << 7)
-
-#define DP_EDP_CONFIGURATION_CAP            0x00d
-#define DP_TRAINING_AUX_RD_INTERVAL         0x00e
-
-#define DP_PSR_SUPPORT                      0x070
+# define DP_PORT_COUNT_MASK		    0x0f
+# define DP_MSA_TIMING_PAR_IGNORED	    (1 << 6) /* eDP */
+# define DP_OUI_SUPPORT			    (1 << 7)
+
+#define DP_I2C_SPEED_CAP		    0x00c    /* DPI */
+# define DP_I2C_SPEED_1K		    0x01
+# define DP_I2C_SPEED_5K		    0x02
+# define DP_I2C_SPEED_10K		    0x04
+# define DP_I2C_SPEED_100K		    0x08
+# define DP_I2C_SPEED_400K		    0x10
+# define DP_I2C_SPEED_1M		    0x20
+
+#define DP_EDP_CONFIGURATION_CAP            0x00d   /* XXX 1.2? */
+#define DP_TRAINING_AUX_RD_INTERVAL         0x00e   /* XXX 1.2? */
+
+/* Multiple stream transport */
+#define DP_MSTM_CAP			    0x021   /* 1.2 */
+# define DP_MST_CAP			    (1 << 0)
+
+#define DP_PSR_SUPPORT                      0x070   /* XXX 1.2? */
 # define DP_PSR_IS_SUPPORTED                1
-#define DP_PSR_CAPS                         0x071
+#define DP_PSR_CAPS                         0x071   /* XXX 1.2? */
 # define DP_PSR_NO_TRAIN_ON_EXIT            1
 # define DP_PSR_SETUP_TIME_330              (0 << 1)
 # define DP_PSR_SETUP_TIME_275              (1 << 1)
@@ -93,11 +119,36 @@
 # define DP_PSR_SETUP_TIME_MASK             (7 << 1)
 # define DP_PSR_SETUP_TIME_SHIFT            1
 
+/*
+ * 0x80-0x8f describe downstream port capabilities, but there are two layouts
+ * based on whether DP_DETAILED_CAP_INFO_AVAILABLE was set.  If it was not,
+ * each port's descriptor is one byte wide.  If it was set, each port's is
+ * four bytes wide, starting with the one byte from the base info.  As of
+ * DP interop v1.1a only VGA defines additional detail.
+ */
+
+/* offset 0 */
+#define DP_DOWNSTREAM_PORT_0		    0x80
+# define DP_DS_PORT_TYPE_MASK		    (7 << 0)
+# define DP_DS_PORT_TYPE_DP		    0
+# define DP_DS_PORT_TYPE_VGA		    1
+# define DP_DS_PORT_TYPE_DVI		    2
+# define DP_DS_PORT_TYPE_HDMI		    3
+# define DP_DS_PORT_TYPE_NON_EDID	    4
+# define DP_DS_PORT_HPD			    (1 << 3)
+/* offset 1 for VGA is maximum megapixels per second / 8 */
+/* offset 2 */
+# define DP_DS_VGA_MAX_BPC_MASK		    (3 << 0)
+# define DP_DS_VGA_8BPC			    0
+# define DP_DS_VGA_10BPC		    1
+# define DP_DS_VGA_12BPC		    2
+# define DP_DS_VGA_16BPC		    3
+
 /* link configuration */
 #define	DP_LINK_BW_SET		            0x100
 # define DP_LINK_BW_1_62		    0x06
 # define DP_LINK_BW_2_7			    0x0a
-# define DP_LINK_BW_5_4			    0x14
+# define DP_LINK_BW_5_4			    0x14    /* 1.2 */
 
 #define DP_LANE_COUNT_SET	            0x101
 # define DP_LANE_COUNT_MASK		    0x0f
@@ -107,7 +158,7 @@
 # define DP_TRAINING_PATTERN_DISABLE	    0
 # define DP_TRAINING_PATTERN_1		    1
 # define DP_TRAINING_PATTERN_2		    2
-# define DP_TRAINING_PATTERN_3		    3
+# define DP_TRAINING_PATTERN_3		    3	    /* 1.2 */
 # define DP_TRAINING_PATTERN_MASK	    0x3
 
 # define DP_LINK_QUAL_PATTERN_DISABLE	    (0 << 2)
@@ -148,24 +199,38 @@
 
 #define DP_DOWNSPREAD_CTRL		    0x107
 # define DP_SPREAD_AMP_0_5		    (1 << 4)
+# define DP_MSA_TIMING_PAR_IGNORE_EN	    (1 << 7) /* eDP */
 
 #define DP_MAIN_LINK_CHANNEL_CODING_SET	    0x108
 # define DP_SET_ANSI_8B10B		    (1 << 0)
 
-#define DP_PSR_EN_CFG			    0x170
+#define DP_I2C_SPEED_CONTROL_STATUS	    0x109   /* DPI */
+/* bitmask as for DP_I2C_SPEED_CAP */
+
+#define DP_EDP_CONFIGURATION_SET            0x10a   /* XXX 1.2? */
+
+#define DP_MSTM_CTRL			    0x111   /* 1.2 */
+# define DP_MST_EN			    (1 << 0)
+# define DP_UP_REQ_EN			    (1 << 1)
+# define DP_UPSTREAM_IS_SRC		    (1 << 2)
+
+#define DP_PSR_EN_CFG			    0x170   /* XXX 1.2? */
 # define DP_PSR_ENABLE			    (1 << 0)
 # define DP_PSR_MAIN_LINK_ACTIVE	    (1 << 1)
 # define DP_PSR_CRC_VERIFICATION	    (1 << 2)
 # define DP_PSR_FRAME_CAPTURE		    (1 << 3)
 
+#define DP_SINK_COUNT			    0x200
+/* prior to 1.2 bit 7 was reserved mbz */
+# define DP_GET_SINK_COUNT(x)		    ((((x) & 0x80) >> 1) | ((x) & 0x3f))
+# define DP_SINK_CP_READY		    (1 << 6)
+
 #define DP_DEVICE_SERVICE_IRQ_VECTOR	    0x201
 # define DP_REMOTE_CONTROL_COMMAND_PENDING  (1 << 0)
 # define DP_AUTOMATED_TEST_REQUEST	    (1 << 1)
 # define DP_CP_IRQ			    (1 << 2)
 # define DP_SINK_SPECIFIC_IRQ		    (1 << 6)
 
-#define DP_EDP_CONFIGURATION_SET            0x10a
-
 #define DP_LANE0_1_STATUS		    0x202
 #define DP_LANE2_3_STATUS		    0x203
 # define DP_LANE_CR_DONE		    (1 << 0)
@@ -225,14 +290,14 @@
 # define DP_SET_POWER_D0                    0x1
 # define DP_SET_POWER_D3                    0x2
 
-#define DP_PSR_ERROR_STATUS                 0x2006
+#define DP_PSR_ERROR_STATUS                 0x2006  /* XXX 1.2? */
 # define DP_PSR_LINK_CRC_ERROR              (1 << 0)
 # define DP_PSR_RFB_STORAGE_ERROR           (1 << 1)
 
-#define DP_PSR_ESI                          0x2007
+#define DP_PSR_ESI                          0x2007  /* XXX 1.2? */
 # define DP_PSR_CAPS_CHANGE                 (1 << 0)
 
-#define DP_PSR_STATUS                       0x2008
+#define DP_PSR_STATUS                       0x2008  /* XXX 1.2? */
 # define DP_PSR_SINK_INACTIVE               0
 # define DP_PSR_SINK_ACTIVE_SRC_SYNCED      1
 # define DP_PSR_SINK_ACTIVE_RFB             2