Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 158 insertions, 0 deletions

diff --git a/include/asm-v850/as85ep1.h b/include/asm-v850/as85ep1.h
new file mode 100644
index 000000000000..659bc910ffd7
--- /dev/null
+++ b/include/asm-v850/as85ep1.h
@@ -0,0 +1,158 @@
+/*
+ * include/asm-v850/as85ep1.h -- AS85EP1 evaluation CPU chip/board
+ *
+ *  Copyright (C) 2001,02,03  NEC Electronics Corporation
+ *  Copyright (C) 2001,02,03  Miles Bader <miles@gnu.org>
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License.  See the file COPYING in the main directory of this
+ * archive for more details.
+ *
+ * Written by Miles Bader <miles@gnu.org>
+ */
+
+#ifndef __V850_AS85EP1_H__
+#define __V850_AS85EP1_H__
+
+#include <asm/v850e.h>
+
+
+#define CPU_MODEL	"as85ep1"
+#define CPU_MODEL_LONG	"NEC V850E/AS85EP1"
+#define PLATFORM	"AS85EP1"
+#define PLATFORM_LONG	"NEC V850E/AS85EP1 evaluation board"
+
+#define CPU_CLOCK_FREQ	96000000 /*  96MHz */
+#define SYS_CLOCK_FREQ	CPU_CLOCK_FREQ
+
+
+/* 1MB of static RAM.  */
+#define SRAM_ADDR	0x00400000
+#define SRAM_SIZE	0x00100000 /* 1MB */
+/* About 58MB of DRAM.  This can actually be at one of two positions,
+   determined by jump JP3; we have to use the first position because the
+   second is partially out of processor instruction addressing range
+   (though in the second position there's actually 64MB available).  */
+#define SDRAM_ADDR	0x00600000
+#define SDRAM_SIZE	0x039F8000 /* approx 58MB */
+
+/* For <asm/page.h> */
+#define PAGE_OFFSET 	SRAM_ADDR
+
+/* We use on-chip RAM, for a few miscellaneous variables that must be
+   accessible using a load instruction relative to R0.  The AS85EP1 chip
+   16K of internal RAM located slightly before I/O space.  */
+#define R0_RAM_ADDR	0xFFFF8000
+
+
+/* AS85EP1 specific control registers.  */
+#define AS85EP1_CSC_ADDR(n)	(0xFFFFF060 + (n) * 2)
+#define AS85EP1_CSC(n)		(*(volatile u16 *)AS85EP1_CSC_ADDR(n))
+#define AS85EP1_BSC_ADDR	0xFFFFF066
+#define AS85EP1_BSC		(*(volatile u16 *)AS85EP1_BSC_ADDR)
+#define AS85EP1_BCT_ADDR(n)	(0xFFFFF480 + (n) * 2)
+#define AS85EP1_BCT(n)		(*(volatile u16 *)AS85EP1_BCT_ADDR(n))
+#define AS85EP1_DWC_ADDR(n)	(0xFFFFF484 + (n) * 2)
+#define AS85EP1_DWC(n)		(*(volatile u16 *)AS85EP1_DWC_ADDR(n))
+#define AS85EP1_BCC_ADDR	0xFFFFF488
+#define AS85EP1_BCC		(*(volatile u16 *)AS85EP1_BCC_ADDR)
+#define AS85EP1_ASC_ADDR	0xFFFFF48A
+#define AS85EP1_ASC		(*(volatile u16 *)AS85EP1_ASC_ADDR)
+#define AS85EP1_BCP_ADDR	0xFFFFF48C
+#define AS85EP1_BCP		(*(volatile u16 *)AS85EP1_BCP_ADDR)
+#define AS85EP1_LBS_ADDR	0xFFFFF48E
+#define AS85EP1_LBS		(*(volatile u16 *)AS85EP1_LBS_ADDR)
+#define AS85EP1_BMC_ADDR	0xFFFFF498
+#define AS85EP1_BMC		(*(volatile u16 *)AS85EP1_BMC_ADDR)
+#define AS85EP1_PRC_ADDR	0xFFFFF49A
+#define AS85EP1_PRC		(*(volatile u16 *)AS85EP1_PRC_ADDR)
+#define AS85EP1_SCR_ADDR(n)	(0xFFFFF4A0 + (n) * 4)
+#define AS85EP1_SCR(n)		(*(volatile u16 *)AS85EP1_SCR_ADDR(n))
+#define AS85EP1_RFS_ADDR(n)	(0xFFFFF4A2 + (n) * 4)
+#define AS85EP1_RFS(n)		(*(volatile u16 *)AS85EP1_RFS_ADDR(n))
+#define AS85EP1_IRAMM_ADDR	0xFFFFF80A
+#define AS85EP1_IRAMM		(*(volatile u8 *)AS85EP1_IRAMM_ADDR)
+
+
+
+/* I/O port P0-P13. */
+/* Direct I/O.  Bits 0-7 are pins Pn0-Pn7.  */
+#define AS85EP1_PORT_IO_ADDR(n)	(0xFFFFF400 + (n) * 2)
+#define AS85EP1_PORT_IO(n)	(*(volatile u8 *)AS85EP1_PORT_IO_ADDR(n))
+/* Port mode (for direct I/O, 0 = output, 1 = input).  */
+#define AS85EP1_PORT_PM_ADDR(n)	(0xFFFFF420 + (n) * 2)
+#define AS85EP1_PORT_PM(n)	(*(volatile u8 *)AS85EP1_PORT_PM_ADDR(n))
+/* Port mode control (0 = direct I/O mode, 1 = alternative I/O mode).  */
+#define AS85EP1_PORT_PMC_ADDR(n) (0xFFFFF440 + (n) * 2)
+#define AS85EP1_PORT_PMC(n)	(*(volatile u8 *)AS85EP1_PORT_PMC_ADDR(n))
+
+
+/* Hardware-specific interrupt numbers (in the kernel IRQ namespace).  */
+#define IRQ_INTCCC(n)	(0x0C + (n))
+#define IRQ_INTCCC_NUM	8
+#define IRQ_INTCMD(n)	(0x14 + (n)) /* interval timer interrupts 0-5 */
+#define IRQ_INTCMD_NUM	6
+#define IRQ_INTSRE(n)	(0x1E + (n)*3) /* UART 0-1 reception error */
+#define IRQ_INTSRE_NUM	2
+#define IRQ_INTSR(n)	(0x1F + (n)*3) /* UART 0-1 reception completion */
+#define IRQ_INTSR_NUM	2
+#define IRQ_INTST(n)	(0x20 + (n)*3) /* UART 0-1 transmission completion */
+#define IRQ_INTST_NUM	2
+
+#define NUM_CPU_IRQS	64
+
+#ifndef __ASSEMBLY__
+/* Initialize chip interrupts.  */
+extern void as85ep1_init_irqs (void);
+#endif
+
+
+/* AS85EP1 UART details (basically the same as the V850E/MA1, but 2 channels).  */
+#define V850E_UART_NUM_CHANNELS		2
+#define V850E_UART_BASE_FREQ		(SYS_CLOCK_FREQ / 4)
+#define V850E_UART_CHIP_NAME 		"V850E/NA85E"
+
+/* This is a function that gets called before configuring the UART.  */
+#define V850E_UART_PRE_CONFIGURE	as85ep1_uart_pre_configure
+#ifndef __ASSEMBLY__
+extern void as85ep1_uart_pre_configure (unsigned chan,
+					unsigned cflags, unsigned baud);
+#endif
+
+/* This board supports RTS/CTS for the on-chip UART, but only for channel 1. */
+
+/* CTS for UART channel 1 is pin P54 (bit 4 of port 5).  */
+#define V850E_UART_CTS(chan)   ((chan) == 1 ? !(AS85EP1_PORT_IO(5) & 0x10) : 1)
+/* RTS for UART channel 1 is pin P53 (bit 3 of port 5).  */
+#define V850E_UART_SET_RTS(chan, val)					      \
+   do {									      \
+	   if (chan == 1) {						      \
+		   unsigned old = AS85EP1_PORT_IO(5); 			      \
+		   if (val)						      \
+			   AS85EP1_PORT_IO(5) = old & ~0x8;		      \
+		   else							      \
+			   AS85EP1_PORT_IO(5) = old | 0x8;		      \
+	   }								      \
+   } while (0)
+
+
+/* Timer C details.  */
+#define V850E_TIMER_C_BASE_ADDR		0xFFFFF600
+
+/* Timer D details (the AS85EP1 actually has 5 of these; should change later). */
+#define V850E_TIMER_D_BASE_ADDR		0xFFFFF540
+#define V850E_TIMER_D_TMD_BASE_ADDR 	(V850E_TIMER_D_BASE_ADDR + 0x0)
+#define V850E_TIMER_D_CMD_BASE_ADDR 	(V850E_TIMER_D_BASE_ADDR + 0x2)
+#define V850E_TIMER_D_TMCD_BASE_ADDR 	(V850E_TIMER_D_BASE_ADDR + 0x4)
+
+#define V850E_TIMER_D_BASE_FREQ		SYS_CLOCK_FREQ
+#define V850E_TIMER_D_TMCD_CS_MIN	2 /* min 2^2 divider */
+
+
+/* For <asm/param.h> */
+#ifndef HZ
+#define HZ	100
+#endif
+
+
+#endif /* __V850_AS85EP1_H__ */