Merge branch 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus

* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: (50 commits)
  [MIPS] Add smp_call_function_single()
  [MIPS] thread_info.h: kmalloc + memset conversion to kzalloc
  [MIPS] Kexec: Fix several 64-bit bugs.
  [MIPS] Kexec: Fix several warnings.
  [MIPS] DDB5477: Remove support
  [MIPS] Fulong: Remove unneeded header file
  [MIPS] Cobalt: Enable UART on RaQ1
  [MIPS] Remove unused GROUP_TOSHIBA_NAMES
  [MIPS] remove some duplicate includes
  [MIPS] Oprofile: Fix rm9000 performance counter handler
  [MIPS] Use -Werror on subdirectories which build cleanly.
  [MIPS] Yosemite: Fix warning.
  [MIPS] PMON: Fix cpustart declaration.
  [MIPS] Yosemite: Only build ll_ht_smp_irq_handler() if HYPERTRANSPORT.
  [MIPS] Yosemite: Fix build error due to undeclared titan_mailbox_irq().
  [MIPS] Yosemite: Don't declare titan_mailbox_irq() as asmlinkage.
  [MIPS] Yosemite: Fix warnings in i2c-yoesmite by deleting the unused code.
  [MIPS] Delete unused arch/mips/gt64120/common/
  [MIPS] Fix build warning in unaligned load/store emulator.
  [MIPS] IP32: Don't ignore request_irq's return value.
  ...

18 files changed, 125 insertions, 660 deletions

diff --git a/include/asm-mips/a.out.h b/include/asm-mips/a.out.h
index 1ad60ba186d0..bf55a5b34bef 100644
--- a/include/asm-mips/a.out.h
+++ b/include/asm-mips/a.out.h
@@ -38,7 +38,8 @@ struct exec
 #define STACK_TOP	TASK_SIZE
 #endif
 #ifdef CONFIG_64BIT
-#define STACK_TOP	(current->thread.mflags & MF_32BIT_ADDR ? TASK_SIZE32 : TASK_SIZE)
+#define STACK_TOP	\
+      (test_thread_flag(TIF_32BIT_ADDR) ? TASK_SIZE32 : TASK_SIZE)
 #endif
 #define STACK_TOP_MAX	TASK_SIZE
 
diff --git a/include/asm-mips/bootinfo.h b/include/asm-mips/bootinfo.h
index 087126a5faf9..c0f052b37b9e 100644
--- a/include/asm-mips/bootinfo.h
+++ b/include/asm-mips/bootinfo.h
@@ -86,16 +86,6 @@
 #define  MACH_COBALT_27		0	/* Proto "27" hardware		*/
 
 /*
- * Valid machtype for group NEC DDB
- */
-#define MACH_GROUP_NEC_DDB	8	/* NEC DDB			*/
-#define  MACH_NEC_DDB5074	0	/* NEC DDB Vrc-5074 */
-#define  MACH_NEC_DDB5476	1	/* NEC DDB Vrc-5476 */
-#define  MACH_NEC_DDB5477	2	/* NEC DDB Vrc-5477 */
-#define  MACH_NEC_ROCKHOPPER	3	/* Rockhopper base board */
-#define  MACH_NEC_ROCKHOPPERII	4	/* Rockhopper II base board */
-
-/*
  * Valid machtype for group BAGET
  */
 #define MACH_GROUP_BAGET	9	/* Baget			*/
@@ -145,9 +135,6 @@
 #define  MACH_TOSHIBA_RBTX4937	5
 #define  MACH_TOSHIBA_RBTX4938	6
 
-#define GROUP_TOSHIBA_NAMES	{ "Pallas", "TopasCE", "JMR", "JMR TX3927", \
-				  "RBTX4927", "RBTX4937" }
-
 /*
  * Valid machtype for group Alchemy
  */
diff --git a/include/asm-mips/ddb5xxx/ddb5477.h b/include/asm-mips/ddb5xxx/ddb5477.h
deleted file mode 100644
index 6cf177caf6d5..000000000000
--- a/include/asm-mips/ddb5xxx/ddb5477.h
+++ /dev/null
@@ -1,342 +0,0 @@
-/***********************************************************************
- *
- * Copyright 2001 MontaVista Software Inc.
- * Author: jsun@mvista.com or jsun@junsun.net
- *
- * include/asm-mips/ddb5xxx/ddb5477.h
- *     DDB 5477 specific definitions and macros.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- *
- ***********************************************************************
- */
-
-#ifndef __ASM_DDB5XXX_DDB5477_H
-#define __ASM_DDB5XXX_DDB5477_H
-
-#include <irq.h>
-
-/*
- * This contains macros that are specific to DDB5477 or renamed from
- * DDB5476.
- */
-
-/*
- * renamed PADRs
- */
-#define	DDB_LCS0	DDB_DCS2
-#define	DDB_LCS1	DDB_DCS3
-#define	DDB_LCS2	DDB_DCS4
-#define	DDB_VRC5477	DDB_INTCS
-
-/*
- * New CPU interface registers
- */
-#define	DDB_INTCTRL0	0x0400	/* Interrupt Control 0 */
-#define	DDB_INTCTRL1	0x0404	/* Interrupt Control 1 */
-#define	DDB_INTCTRL2	0x0408	/* Interrupt Control 2 */
-#define	DDB_INTCTRL3	0x040c	/* Interrupt Control 3 */
-
-#define	DDB_INT0STAT	0x0420 	/* INT0 Status [R] */
-#define	DDB_INT1STAT	0x0428 	/* INT1 Status [R] */
-#define	DDB_INT2STAT	0x0430 	/* INT2 Status [R] */
-#define	DDB_INT3STAT	0x0438 	/* INT3 Status [R] */
-#define	DDB_INT4STAT	0x0440 	/* INT4 Status [R] */
-#define	DDB_NMISTAT	0x0450	/* NMI Status [R] */
-
-#define	DDB_INTCLR32	0x0468	/* Interrupt Clear */
-
-#define	DDB_INTPPES0	0x0470	/* PCI0 Interrupt Control */
-#define	DDB_INTPPES1	0x0478	/* PCI1 Interrupt Control */
-
-#undef  DDB_CPUSTAT		/* duplicate in Vrc-5477 */
-#define	DDB_CPUSTAT	0x0480	/* CPU Status [R] */
-#define	DDB_BUSCTRL	0x0488	/* Internal Bus Control */
-
-
-/*
- * Timer registers
- */
-#define	DDB_REFCTRL_L	DDB_T0CTRL
-#define	DDB_REFCTRL_H	(DDB_T0CTRL+4)
-#define	DDB_REFCNTR	DDB_T0CNTR
-#define	DDB_SPT0CTRL_L	DDB_T1CTRL
-#define	DDB_SPT0CTRL_H	(DDB_T1CTRL+4)
-#define	DDB_SPT1CTRL_L	DDB_T2CTRL
-#define	DDB_SPT1CTRL_H	(DDB_T2CTRL+4)
-#define DDB_SPT1CNTR	DDB_T1CTRL
-#define	DDB_WDTCTRL_L	DDB_T3CTRL
-#define	DDB_WDTCTRL_H	(DDB_T3CTRL+4)
-#define	DDB_WDTCNTR	DDB_T3CNTR
-
-/*
- * DMA registers are moved.  We don't care about it for now. TODO.
- */
-
-/*
- * BARs for ext PCI (PCI0)
- */
-#undef	DDB_BARC
-#undef	DDB_BARB
-
-#define DDB_BARC0	0x0210	/* PCI0 Control */
-#define DDB_BARM010	0x0218	/* PCI0 SDRAM bank01 */
-#define	DDB_BARM230	0x0220	/* PCI0 SDRAM bank23 */
-#define	DDB_BAR00	0x0240	/* PCI0 LDCS0 */
-#define	DDB_BAR10	0x0248	/* PCI0 LDCS1 */
-#define	DDB_BAR20	0x0250	/* PCI0 LDCS2 */
-#define	DDB_BAR30	0x0258	/* PCI0 LDCS3 */
-#define	DDB_BAR40	0x0260	/* PCI0 LDCS4 */
-#define	DDB_BAR50	0x0268	/* PCI0 LDCS5 */
-#define	DDB_BARB0	0x0280	/* PCI0 BOOT */
-#define	DDB_BARP00	0x0290	/* PCI0 for IOPCI Window0 */
-#define	DDB_BARP10	0x0298	/* PCI0 for IOPCI Window1 */
-
-/*
- * BARs for IOPIC (PCI1)
- */
-#define DDB_BARC1	0x0610	/* PCI1 Control */
-#define DDB_BARM011	0x0618	/* PCI1 SDRAM bank01 */
-#define	DDB_BARM231	0x0620	/* PCI1 SDRAM bank23 */
-#define	DDB_BAR01	0x0640	/* PCI1 LDCS0 */
-#define	DDB_BAR11	0x0648	/* PCI1 LDCS1 */
-#define	DDB_BAR21	0x0650	/* PCI1 LDCS2 */
-#define	DDB_BAR31	0x0658	/* PCI1 LDCS3 */
-#define	DDB_BAR41	0x0660	/* PCI1 LDCS4 */
-#define	DDB_BAR51	0x0668	/* PCI1 LDCS5 */
-#define	DDB_BARB1	0x0680	/* PCI1 BOOT */
-#define	DDB_BARP01	0x0690	/* PCI1 for ext PCI Window0 */
-#define	DDB_BARP11	0x0698	/* PCI1 for ext PCI Window1 */
-
-/*
- * Other registers for ext PCI (PCI0)
- */
-#define	DDB_PCIINIT00	0x02f0	/* PCI0 Initiator 0 */
-#define	DDB_PCIINIT10	0x02f8	/* PCI0 Initiator 1 */
-
-#define	DDB_PCISWP0	0x02b0	/* PCI0 Swap */
-#define	DDB_PCIERR0	0x02b8	/* PCI0 Error */
-
-#define	DDB_PCICTL0_L	0x02e0	/* PCI0 Control-L */
-#define	DDB_PCICTL0_H	0x02e4	/* PCI0 Control-H */
-#define	DDB_PCIARB0_L	0x02e8	/* PCI0 Arbitration-L */
-#define	DDB_PCIARB0_H	0x02ec	/* PCI0 Arbitration-H */
-
-/*
- * Other registers for IOPCI (PCI1)
- */
-#define DDB_IOPCIW0	0x00d0	/* PCI Address Window 0 [R/W] */
-#define DDB_IOPCIW1	0x00d8	/* PCI Address Window 1 [R/W] */
-
-#define	DDB_PCIINIT01	0x06f0	/* PCI1 Initiator 0 */
-#define	DDB_PCIINIT11	0x06f8	/* PCI1 Initiator 1 */
-
-#define	DDB_PCISWP1	0x06b0	/* PCI1 Swap */
-#define	DDB_PCIERR1	0x06b8	/* PCI1 Error */
-
-#define	DDB_PCICTL1_L	0x06e0	/* PCI1 Control-L */
-#define	DDB_PCICTL1_H	0x06e4	/* PCI1 Control-H */
-#define	DDB_PCIARB1_L	0x06e8	/* PCI1 Arbitration-L */
-#define	DDB_PCIARB1_H	0x06ec	/* PCI1 Arbitration-H */
-
-/*
- * Local Bus
- */
-#define DDB_LCST0	0x0110  /* LB Chip Select Timing 0 */
-#define DDB_LCST1	0x0118  /* LB Chip Select Timing 1 */
-#undef DDB_LCST2
-#define DDB_LCST2	0x0120  /* LB Chip Select Timing 2 */
-#undef DDB_LCST3
-#undef DDB_LCST4
-#undef DDB_LCST5
-#undef DDB_LCST6
-#undef DDB_LCST7
-#undef DDB_LCST8
-#define DDB_ERRADR	0x0150  /* Error Address Register */
-#define DDB_ERRCS       0x0160
-#define DDB_BTM		0x0170  /* Boot Time Mode value */
-
-/*
- * MISC registers
- */
-#define DDB_GIUFUNSEL	0x4040  /* select dual-func pins */
-#define DDB_PIBMISC	0x0750	/* USB buffer enable / power saving */
-
-/*
- *  Memory map (physical address)
- *
- *  Note most of the following address must be properly aligned by the
- *  corresponding size.  For example, if PCI_IO_SIZE is 16MB, then
- *  PCI_IO_BASE must be aligned along 16MB boundary.
- */
-
-/* the actual ram size is detected at run-time */
-#define	DDB_SDRAM_BASE		0x00000000
-#define	DDB_MAX_SDRAM_SIZE	0x08000000	/* less than 128MB */
-
-#define	DDB_PCI0_MEM_BASE	0x08000000
-#define	DDB_PCI0_MEM_SIZE	0x08000000	/* 128 MB */
-
-#define	DDB_PCI1_MEM_BASE	0x10000000
-#define	DDB_PCI1_MEM_SIZE	0x08000000	/* 128 MB */
-
-#define	DDB_PCI0_CONFIG_BASE	0x18000000
-#define	DDB_PCI0_CONFIG_SIZE	0x01000000	/* 16 MB */
-
-#define	DDB_PCI1_CONFIG_BASE	0x19000000
-#define	DDB_PCI1_CONFIG_SIZE	0x01000000	/* 16 MB */
-
-#define	DDB_PCI_IO_BASE		0x1a000000	/* we concatenate two IOs */
-#define	DDB_PCI0_IO_BASE	0x1a000000
-#define	DDB_PCI0_IO_SIZE	0x01000000	/* 16 MB */
-#define	DDB_PCI1_IO_BASE	0x1b000000
-#define	DDB_PCI1_IO_SIZE	0x01000000	/* 16 MB */
-
-#define	DDB_LCS0_BASE		0x1c000000	/* flash memory */
-#define	DDB_LCS0_SIZE		0x01000000	/* 16 MB */
-
-#define	DDB_LCS1_BASE		0x1d000000	/* misc */
-#define	DDB_LCS1_SIZE		0x01000000	/* 16 MB */
-
-#define	DDB_LCS2_BASE		0x1e000000	/* Mezzanine */
-#define	DDB_LCS2_SIZE		0x01000000	/* 16 MB */
-
-#define	DDB_VRC5477_BASE	0x1fa00000	/* VRC5477 control regs */
-#define	DDB_VRC5477_SIZE	0x00200000	/* 2MB */
-
-#define	DDB_BOOTCS_BASE		0x1fc00000	/* Boot ROM / EPROM /Flash */
-#define	DDB_BOOTCS_SIZE		0x00200000	/* 2 MB - doc says 4MB */
-
-#define	DDB_LED			DDB_LCS1_BASE + 0x10000
-
-
-/*
- * DDB5477 specific functions
- */
-#ifndef __ASSEMBLY__
-extern void ddb5477_irq_setup(void);
-
-/* route irq to cpu int pin */
-extern void ll_vrc5477_irq_route(int vrc5477_irq, int ip);
-
-/* low-level routine for enabling vrc5477 irq, bypassing high-level */
-extern void ll_vrc5477_irq_enable(int vrc5477_irq);
-extern void ll_vrc5477_irq_disable(int vrc5477_irq);
-#endif /* !__ASSEMBLY__ */
-
-/* PCI intr ack share PCIW0 with PCI IO */
-#define	DDB_PCI_IACK_BASE	DDB_PCI_IO_BASE
-
-/*
- * Interrupt mapping
- *
- * We have three interrupt controllers:
- *
- *   . CPU itself - 8 sources
- *   . i8259 - 16 sources
- *   . vrc5477 - 32 sources
- *
- *  They connected as follows:
- *    all vrc5477 interrupts are routed to cpu IP2 (by software setting)
- *    all i8359 are routed to INTC in vrc5477 (by hardware connection)
- *
- *  All VRC5477 PCI interrupts are level-triggered (no ack needed).
- *  All PCI irq but INTC are active low.
- */
-
-/*
- * irq number block assignment
- */
-
-#define	NUM_CPU_IRQ		8
-#define	NUM_VRC5477_IRQ		32
-
-#define	CPU_IRQ_BASE		MIPS_CPU_IRQ_BASE
-#define	VRC5477_IRQ_BASE	(CPU_IRQ_BASE + NUM_CPU_IRQ)
-
-/*
- * vrc5477 irq defs
- */
-
-#define VRC5477_IRQ_CPCE	(0 + VRC5477_IRQ_BASE)	/* cpu parity error */
-#define VRC5477_IRQ_CNTD	(1 + VRC5477_IRQ_BASE)	/* cpu no target */
-#define VRC5477_IRQ_I2C		(2 + VRC5477_IRQ_BASE)	/* I2C */
-#define VRC5477_IRQ_DMA		(3 + VRC5477_IRQ_BASE)	/* DMA */
-#define VRC5477_IRQ_UART0	(4 + VRC5477_IRQ_BASE)
-#define VRC5477_IRQ_WDOG	(5 + VRC5477_IRQ_BASE)	/* watchdog timer */
-#define VRC5477_IRQ_SPT1	(6 + VRC5477_IRQ_BASE)    /* special purpose timer 1 */
-#define VRC5477_IRQ_LBRT	(7 + VRC5477_IRQ_BASE)	/* local bus read timeout */
-#define VRC5477_IRQ_INTA	(8 + VRC5477_IRQ_BASE)	/* PCI INT #A */
-#define VRC5477_IRQ_INTB	(9 + VRC5477_IRQ_BASE)	/* PCI INT #B */
-#define VRC5477_IRQ_INTC	(10 + VRC5477_IRQ_BASE)	/* PCI INT #C */
-#define VRC5477_IRQ_INTD	(11 + VRC5477_IRQ_BASE)	/* PCI INT #D */
-#define VRC5477_IRQ_INTE	(12 + VRC5477_IRQ_BASE)	/* PCI INT #E */
-#define VRC5477_IRQ_RESERVED_13	(13 + VRC5477_IRQ_BASE)	/* reserved  */
-#define VRC5477_IRQ_PCIS	(14 + VRC5477_IRQ_BASE)	/* PCI SERR #  */
-#define VRC5477_IRQ_PCI		(15 + VRC5477_IRQ_BASE)	/* PCI internal error */
-#define VRC5477_IRQ_IOPCI_INTA	(16 + VRC5477_IRQ_BASE)      /* USB-H */
-#define VRC5477_IRQ_IOPCI_INTB	(17 + VRC5477_IRQ_BASE)      /* USB-P */
-#define VRC5477_IRQ_IOPCI_INTC	(18 + VRC5477_IRQ_BASE)      /* AC97 */
-#define VRC5477_IRQ_IOPCI_INTD	(19 + VRC5477_IRQ_BASE)      /* Reserved */
-#define VRC5477_IRQ_UART1	(20 + VRC5477_IRQ_BASE)
-#define VRC5477_IRQ_SPT0	(21 + VRC5477_IRQ_BASE)      /* special purpose timer 0 */
-#define VRC5477_IRQ_GPT0	(22 + VRC5477_IRQ_BASE)      /* general purpose timer 0 */
-#define VRC5477_IRQ_GPT1	(23 + VRC5477_IRQ_BASE)      /* general purpose timer 1 */
-#define VRC5477_IRQ_GPT2	(24 + VRC5477_IRQ_BASE)      /* general purpose timer 2 */
-#define VRC5477_IRQ_GPT3	(25 + VRC5477_IRQ_BASE)      /* general purpose timer 3 */
-#define VRC5477_IRQ_GPIO	(26 + VRC5477_IRQ_BASE)
-#define VRC5477_IRQ_SIO0	(27 + VRC5477_IRQ_BASE)
-#define VRC5477_IRQ_SIO1        (28 + VRC5477_IRQ_BASE)
-#define VRC5477_IRQ_RESERVED_29 (29 + VRC5477_IRQ_BASE)      /* reserved */
-#define VRC5477_IRQ_IOPCISERR	(30 + VRC5477_IRQ_BASE)      /* IO PCI SERR # */
-#define VRC5477_IRQ_IOPCI	(31 + VRC5477_IRQ_BASE)
-
-/*
- * i2859 irq assignment
- */
-#define I8259_IRQ_RESERVED_0	(0 + I8259A_IRQ_BASE)
-#define I8259_IRQ_KEYBOARD	(1 + I8259A_IRQ_BASE)	/* M1543 default */
-#define I8259_IRQ_CASCADE	(2 + I8259A_IRQ_BASE)
-#define I8259_IRQ_UART_B	(3 + I8259A_IRQ_BASE)	/* M1543 default, may conflict with RTC according to schematic diagram  */
-#define I8259_IRQ_UART_A	(4 + I8259A_IRQ_BASE)	/* M1543 default */
-#define I8259_IRQ_PARALLEL	(5 + I8259A_IRQ_BASE)	/* M1543 default */
-#define I8259_IRQ_RESERVED_6	(6 + I8259A_IRQ_BASE)
-#define I8259_IRQ_RESERVED_7	(7 + I8259A_IRQ_BASE)
-#define I8259_IRQ_RTC		(8 + I8259A_IRQ_BASE)	/* who set this? */
-#define I8259_IRQ_USB		(9 + I8259A_IRQ_BASE)	/* ddb_setup */
-#define I8259_IRQ_PMU		(10 + I8259A_IRQ_BASE)	/* ddb_setup */
-#define I8259_IRQ_RESERVED_11	(11 + I8259A_IRQ_BASE)
-#define I8259_IRQ_RESERVED_12	(12 + I8259A_IRQ_BASE)	/* m1543_irq_setup */
-#define I8259_IRQ_RESERVED_13	(13 + I8259A_IRQ_BASE)
-#define I8259_IRQ_HDC1		(14 + I8259A_IRQ_BASE)	/* default and ddb_setup */
-#define I8259_IRQ_HDC2		(15 + I8259A_IRQ_BASE)	/* default */
-
-
-/*
- * misc
- */
-#define	VRC5477_I8259_CASCADE	(VRC5477_IRQ_INTC - VRC5477_IRQ_BASE)
-#define	CPU_VRC5477_CASCADE	2
-
-/*
- * debug routines
- */
-#ifndef __ASSEMBLY__
-#if defined(CONFIG_RUNTIME_DEBUG)
-extern void vrc5477_show_pdar_regs(void);
-extern void vrc5477_show_pci_regs(void);
-extern void vrc5477_show_bar_regs(void);
-extern void vrc5477_show_int_regs(void);
-extern void vrc5477_show_all_regs(void);
-#endif
-
-/*
- * RAM size
- */
-extern int board_ram_size;
-#endif /* !__ASSEMBLY__ */
-
-#endif /* __ASM_DDB5XXX_DDB5477_H */
diff --git a/include/asm-mips/ddb5xxx/ddb5xxx.h b/include/asm-mips/ddb5xxx/ddb5xxx.h
deleted file mode 100644
index e97fcc8d548b..000000000000
--- a/include/asm-mips/ddb5xxx/ddb5xxx.h
+++ /dev/null
@@ -1,263 +0,0 @@
-/*
- * Copyright 2001 MontaVista Software Inc.
- * Author: jsun@mvista.com or jsun@junsun.net
- *
- * Copyright (C) 2000 Geert Uytterhoeven <geert@sonycom.com>
- *                    Sony Software Development Center Europe (SDCE), Brussels
- *
- * include/asm-mips/ddb5xxx/ddb5xxx.h
- *     Common header for all NEC DDB 5xxx boards, including 5074, 5476, 5477.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- *
- */
-
-#ifndef __ASM_DDB5XXX_DDB5XXX_H
-#define __ASM_DDB5XXX_DDB5XXX_H
-
-#include <linux/types.h>
-
-/*
- *  This file is based on the following documentation:
- *
- *	NEC Vrc 5074 System Controller Data Sheet, June 1998
- *
- * [jsun] It is modified so that this file only contains the macros
- * that are true for all DDB 5xxx boards.  The modification is based on
- *
- *	uPD31577(VRC5477) VR5432-SDRAM/PCI Bridge (Luke)
- *	Preliminary Specification Decoment, Rev 1.1, 27 Dec, 2000
- *
- */
-
-
-#define DDB_BASE		0xbfa00000
-#define DDB_SIZE		0x00200000		/* 2 MB */
-
-
-/*
- *  Physical Device Address Registers (PDARs)
- */
-
-#define DDB_SDRAM0	0x0000	/* SDRAM Bank 0 [R/W] */
-#define DDB_SDRAM1	0x0008	/* SDRAM Bank 1 [R/W] */
-#define DDB_DCS2	0x0010	/* Device Chip-Select 2 [R/W] */
-#define DDB_DCS3	0x0018	/* Device Chip-Select 3 [R/W] */
-#define DDB_DCS4	0x0020	/* Device Chip-Select 4 [R/W] */
-#define DDB_DCS5	0x0028	/* Device Chip-Select 5 [R/W] */
-#define DDB_DCS6	0x0030	/* Device Chip-Select 6 [R/W] */
-#define DDB_DCS7	0x0038	/* Device Chip-Select 7 [R/W] */
-#define DDB_DCS8	0x0040	/* Device Chip-Select 8 [R/W] */
-#define DDB_PCIW0	0x0060	/* PCI Address Window 0 [R/W] */
-#define DDB_PCIW1	0x0068	/* PCI Address Window 1 [R/W] */
-#define DDB_INTCS	0x0070	/* Controller Internal Registers and Devices */
-				/* [R/W] */
-#define DDB_BOOTCS	0x0078	/* Boot ROM Chip-Select [R/W] */
-/* Vrc5477 has two more, IOPCIW0, IOPCIW1 */
-
-/*
- *  CPU Interface Registers
- */
-#define DDB_CPUSTAT	0x0080	/* CPU Status [R/W] */
-#define DDB_INTCTRL	0x0088	/* Interrupt Control [R/W] */
-#define DDB_INTSTAT0	0x0090	/* Interrupt Status 0 [R] */
-#define DDB_INTSTAT1	0x0098	/* Interrupt Status 1 and CPU Interrupt */
-				/* Enable [R/W] */
-#define DDB_INTCLR	0x00A0	/* Interrupt Clear [R/W] */
-#define DDB_INTPPES	0x00A8	/* PCI Interrupt Control [R/W] */
-
-
-/*
- *  Memory-Interface Registers
- */
-#define DDB_MEMCTRL	0x00C0	/* Memory Control */
-#define DDB_ACSTIME	0x00C8	/* Memory Access Timing [R/W] */
-#define DDB_CHKERR	0x00D0	/* Memory Check Error Status [R] */
-
-
-/*
- *  PCI-Bus Registers
- */
-#define DDB_PCICTRL	0x00E0	/* PCI Control [R/W] */
-#define DDB_PCIARB	0x00E8	/* PCI Arbiter [R/W] */
-#define DDB_PCIINIT0	0x00F0	/* PCI Master (Initiator) 0 [R/W] */
-#define DDB_PCIINIT1	0x00F8	/* PCI Master (Initiator) 1 [R/W] */
-#define DDB_PCIERR	0x00B8	/* PCI Error [R/W] */
-
-
-/*
- *  Local-Bus Registers
- */
-#define DDB_LCNFG	0x0100	/* Local Bus Configuration [R/W] */
-#define DDB_LCST2	0x0110	/* Local Bus Chip-Select Timing 2 [R/W] */
-#define DDB_LCST3	0x0118	/* Local Bus Chip-Select Timing 3 [R/W] */
-#define DDB_LCST4	0x0120	/* Local Bus Chip-Select Timing 4 [R/W] */
-#define DDB_LCST5	0x0128	/* Local Bus Chip-Select Timing 5 [R/W] */
-#define DDB_LCST6	0x0130	/* Local Bus Chip-Select Timing 6 [R/W] */
-#define DDB_LCST7	0x0138	/* Local Bus Chip-Select Timing 7 [R/W] */
-#define DDB_LCST8	0x0140	/* Local Bus Chip-Select Timing 8 [R/W] */
-#define DDB_DCSFN	0x0150	/* Device Chip-Select Muxing and Output */
-				/* Enables [R/W] */
-#define DDB_DCSIO	0x0158	/* Device Chip-Selects As I/O Bits [R/W] */
-#define DDB_BCST	0x0178	/* Local Boot Chip-Select Timing [R/W] */
-
-
-/*
- *  DMA Registers
- */
-#define DDB_DMACTRL0	0x0180	/* DMA Control 0 [R/W] */
-#define DDB_DMASRCA0	0x0188	/* DMA Source Address 0 [R/W] */
-#define DDB_DMADESA0	0x0190	/* DMA Destination Address 0 [R/W] */
-#define DDB_DMACTRL1	0x0198	/* DMA Control 1 [R/W] */
-#define DDB_DMASRCA1	0x01A0	/* DMA Source Address 1 [R/W] */
-#define DDB_DMADESA1	0x01A8	/* DMA Destination Address 1 [R/W] */
-
-
-/*
- *  Timer Registers
- */
-#define DDB_T0CTRL	0x01C0	/* SDRAM Refresh Control [R/W] */
-#define DDB_T0CNTR	0x01C8	/* SDRAM Refresh Counter [R/W] */
-#define DDB_T1CTRL	0x01D0	/* CPU-Bus Read Time-Out Control [R/W] */
-#define DDB_T1CNTR	0x01D8	/* CPU-Bus Read Time-Out Counter [R/W] */
-#define DDB_T2CTRL	0x01E0	/* General-Purpose Timer Control [R/W] */
-#define DDB_T2CNTR	0x01E8	/* General-Purpose Timer Counter [R/W] */
-#define DDB_T3CTRL	0x01F0	/* Watchdog Timer Control [R/W] */
-#define DDB_T3CNTR	0x01F8	/* Watchdog Timer Counter [R/W] */
-
-
-/*
- *  PCI Configuration Space Registers
- */
-#define DDB_PCI_BASE	0x0200
-
-#define DDB_VID		0x0200	/* PCI Vendor ID [R] */
-#define DDB_DID		0x0202	/* PCI Device ID [R] */
-#define DDB_PCICMD	0x0204	/* PCI Command [R/W] */
-#define DDB_PCISTS	0x0206	/* PCI Status [R/W] */
-#define DDB_REVID	0x0208	/* PCI Revision ID [R] */
-#define DDB_CLASS	0x0209	/* PCI Class Code [R] */
-#define DDB_CLSIZ	0x020C	/* PCI Cache Line Size [R/W] */
-#define DDB_MLTIM	0x020D	/* PCI Latency Timer [R/W] */
-#define DDB_HTYPE	0x020E	/* PCI Header Type [R] */
-#define DDB_BIST	0x020F	/* BIST [R] (unimplemented) */
-#define DDB_BARC	0x0210	/* PCI Base Address Register Control [R/W] */
-#define DDB_BAR0	0x0218	/* PCI Base Address Register 0 [R/W] */
-#define DDB_BAR1	0x0220	/* PCI Base Address Register 1 [R/W] */
-#define DDB_CIS		0x0228	/* PCI Cardbus CIS Pointer [R] */
-				/* (unimplemented) */
-#define DDB_SSVID	0x022C	/* PCI Sub-System Vendor ID [R/W] */
-#define DDB_SSID	0x022E	/* PCI Sub-System ID [R/W] */
-#define DDB_ROM		0x0230	/* Expansion ROM Base Address [R] */
-				/* (unimplemented) */
-#define DDB_INTLIN	0x023C	/* PCI Interrupt Line [R/W] */
-#define DDB_INTPIN	0x023D	/* PCI Interrupt Pin [R] */
-#define DDB_MINGNT	0x023E	/* PCI Min_Gnt [R] (unimplemented) */
-#define DDB_MAXLAT	0x023F	/* PCI Max_Lat [R] (unimplemented) */
-#define DDB_BAR2	0x0240	/* PCI Base Address Register 2 [R/W] */
-#define DDB_BAR3	0x0248	/* PCI Base Address Register 3 [R/W] */
-#define DDB_BAR4	0x0250	/* PCI Base Address Register 4 [R/W] */
-#define DDB_BAR5	0x0258	/* PCI Base Address Register 5 [R/W] */
-#define DDB_BAR6	0x0260	/* PCI Base Address Register 6 [R/W] */
-#define DDB_BAR7	0x0268	/* PCI Base Address Register 7 [R/W] */
-#define DDB_BAR8	0x0270	/* PCI Base Address Register 8 [R/W] */
-#define DDB_BARB	0x0278	/* PCI Base Address Register BOOT [R/W] */
-
-
-/*
- *  Nile 4 Register Access
- */
-
-static inline void ddb_sync(void)
-{
-    volatile u32 *p = (volatile u32 *)0xbfc00000;
-    (void)(*p);
-}
-
-static inline void ddb_out32(u32 offset, u32 val)
-{
-    *(volatile u32 *)(DDB_BASE+offset) = val;
-    ddb_sync();
-}
-
-static inline u32 ddb_in32(u32 offset)
-{
-    u32 val = *(volatile u32 *)(DDB_BASE+offset);
-    ddb_sync();
-    return val;
-}
-
-static inline void ddb_out16(u32 offset, u16 val)
-{
-    *(volatile u16 *)(DDB_BASE+offset) = val;
-    ddb_sync();
-}
-
-static inline u16 ddb_in16(u32 offset)
-{
-    u16 val = *(volatile u16 *)(DDB_BASE+offset);
-    ddb_sync();
-    return val;
-}
-
-static inline void ddb_out8(u32 offset, u8 val)
-{
-    *(volatile u8 *)(DDB_BASE+offset) = val;
-    ddb_sync();
-}
-
-static inline u8 ddb_in8(u32 offset)
-{
-    u8 val = *(volatile u8 *)(DDB_BASE+offset);
-    ddb_sync();
-    return val;
-}
-
-
-/*
- *  Physical Device Address Registers
- */
-
-extern u32
-ddb_calc_pdar(u32 phys, u32 size, int width, int on_memory_bus, int pci_visible);
-extern void
-ddb_set_pdar(u32 pdar, u32 phys, u32 size, int width,
-	     int on_memory_bus, int pci_visible);
-
-/*
- *  PCI Master Registers
- */
-
-#define DDB_PCICMD_IACK		0	/* PCI Interrupt Acknowledge */
-#define DDB_PCICMD_IO		1	/* PCI I/O Space */
-#define DDB_PCICMD_MEM		3	/* PCI Memory Space */
-#define DDB_PCICMD_CFG		5	/* PCI Configuration Space */
-
-/*
- * additional options for pci init reg (no shifting needed)
- */
-#define DDB_PCI_CFGTYPE1     0x200   /* for pci init0/1 regs */
-#define DDB_PCI_ACCESS_32    0x10    /* for pci init0/1 regs */
-
-
-extern void ddb_set_pmr(u32 pmr, u32 type, u32 addr, u32 options);
-
-/*
- * we need to reset pci bus when we start up and shutdown
- */
-extern void ddb_pci_reset_bus(void);
-
-
-/*
- * include the board dependent part
- */
-#if defined(CONFIG_DDB5477)
-#include <asm/ddb5xxx/ddb5477.h>
-#else
-#error "Unknown DDB board!"
-#endif
-
-#endif /* __ASM_DDB5XXX_DDB5XXX_H */
diff --git a/include/asm-mips/elf.h b/include/asm-mips/elf.h
index ebd6bfb19d66..e7d95d48177d 100644
--- a/include/asm-mips/elf.h
+++ b/include/asm-mips/elf.h
@@ -265,7 +265,7 @@ do {									\
 #ifdef CONFIG_MIPS32_N32
 #define __SET_PERSONALITY32_N32()					\
 	do {								\
-		current->thread.mflags |= MF_N32;			\
+		set_thread_flag(TIF_32BIT_ADDR);			\
 		current->thread.abi = &mips_abi_n32;			\
 	} while (0)
 #else
@@ -276,7 +276,8 @@ do {									\
 #ifdef CONFIG_MIPS32_O32
 #define __SET_PERSONALITY32_O32()					\
 	do {								\
-		current->thread.mflags |= MF_O32;			\
+		set_thread_flag(TIF_32BIT_REGS);			\
+		set_thread_flag(TIF_32BIT_ADDR);			\
 		current->thread.abi = &mips_abi_32;			\
 	} while (0)
 #else
@@ -299,13 +300,13 @@ do {									\
 
 #define SET_PERSONALITY(ex, ibcs2)					\
 do {									\
-	current->thread.mflags &= ~MF_ABI_MASK;				\
+	clear_thread_flag(TIF_32BIT_REGS);				\
+	clear_thread_flag(TIF_32BIT_ADDR);				\
+									\
 	if ((ex).e_ident[EI_CLASS] == ELFCLASS32)			\
 		__SET_PERSONALITY32(ex);				\
-	else {								\
-		current->thread.mflags |= MF_N64;			\
+	else								\
 		current->thread.abi = &mips_abi;			\
-	}								\
 									\
 	if (ibcs2)							\
 		set_personality(PER_SVR4);				\
diff --git a/include/asm-mips/hazards.h b/include/asm-mips/hazards.h
index d9119f43f9aa..918a4894b587 100644
--- a/include/asm-mips/hazards.h
+++ b/include/asm-mips/hazards.h
@@ -3,7 +3,7 @@
  * License.  See the file "COPYING" in the main directory of this archive
  * for more details.
  *
- * Copyright (C) 2003, 2004 Ralf Baechle <ralf@linux-mips.org>
+ * Copyright (C) 2003, 04, 07 Ralf Baechle <ralf@linux-mips.org>
  * Copyright (C) MIPS Technologies, Inc.
  *   written by Ralf Baechle <ralf@linux-mips.org>
  */
@@ -23,6 +23,11 @@ static inline void name(void)						\
 	__asm__ __volatile__ (#name);					\
 }
 
+/*
+ * MIPS R2 instruction hazard barrier.   Needs to be called as a subroutine.
+ */
+extern void mips_ihb(void);
+
 #endif
 
 ASMMACRO(_ssnop,
diff --git a/include/asm-mips/mach-tx49xx/cpu-feature-overrides.h b/include/asm-mips/mach-tx49xx/cpu-feature-overrides.h
new file mode 100644
index 000000000000..275eaf92c748
--- /dev/null
+++ b/include/asm-mips/mach-tx49xx/cpu-feature-overrides.h
@@ -0,0 +1,23 @@
+#ifndef __ASM_MACH_TX49XX_CPU_FEATURE_OVERRIDES_H
+#define __ASM_MACH_TX49XX_CPU_FEATURE_OVERRIDES_H
+
+#define cpu_has_llsc	1
+#define cpu_has_64bits	1
+#define cpu_has_inclusive_pcaches	0
+
+#define cpu_has_mips16		0
+#define cpu_has_mdmx		0
+#define cpu_has_mips3d		0
+#define cpu_has_smartmips	0
+#define cpu_has_vtag_icache	0
+#define cpu_has_ic_fills_f_dc	0
+#define cpu_has_dsp	0
+#define cpu_has_mipsmt	0
+#define cpu_has_userlocal	0
+
+#define cpu_has_mips32r1	0
+#define cpu_has_mips32r2	0
+#define cpu_has_mips64r1	0
+#define cpu_has_mips64r2	0
+
+#endif /* __ASM_MACH_TX49XX_CPU_FEATURE_OVERRIDES_H */
diff --git a/include/asm-mips/mach-tx49xx/kmalloc.h b/include/asm-mips/mach-tx49xx/kmalloc.h
new file mode 100644
index 000000000000..913ff196259d
--- /dev/null
+++ b/include/asm-mips/mach-tx49xx/kmalloc.h
@@ -0,0 +1,8 @@
+#ifndef __ASM_MACH_TX49XX_KMALLOC_H
+#define __ASM_MACH_TX49XX_KMALLOC_H
+
+/*
+ * All happy, no need to define ARCH_KMALLOC_MINALIGN
+ */
+
+#endif /* __ASM_MACH_TX49XX_KMALLOC_H */
diff --git a/include/asm-mips/mips-boards/generic.h b/include/asm-mips/mips-boards/generic.h
index c8ebcc3e1267..d58977483534 100644
--- a/include/asm-mips/mips-boards/generic.h
+++ b/include/asm-mips/mips-boards/generic.h
@@ -67,6 +67,7 @@
 #define MIPS_REVISION_CORID_CORE_FPGAR2    8
 #define MIPS_REVISION_CORID_CORE_FPGA3     9
 #define MIPS_REVISION_CORID_CORE_24K       10
+#define MIPS_REVISION_CORID_CORE_FPGA4     11
 
 /**** Artificial corid defines ****/
 /*
diff --git a/include/asm-mips/mips_mt.h b/include/asm-mips/mips_mt.h
index 8045abc78d0f..ac7935203f89 100644
--- a/include/asm-mips/mips_mt.h
+++ b/include/asm-mips/mips_mt.h
@@ -8,6 +8,12 @@
 
 #include <linux/cpumask.h>
 
+/*
+ * How many VPEs and TCs is Linux allowed to use?  0 means no limit.
+ */
+extern int tclimit;
+extern int vpelimit;
+
 extern cpumask_t mt_fpu_cpumask;
 extern unsigned long mt_fpemul_threshold;
 
diff --git a/include/asm-mips/pmon.h b/include/asm-mips/pmon.h
index 260f3448ccf1..6ad519189ce2 100644
--- a/include/asm-mips/pmon.h
+++ b/include/asm-mips/pmon.h
@@ -22,7 +22,7 @@ struct callvectors {
 	char*	(*gets) (char*);
 	union {
 		int	(*smpfork) (unsigned long cp, char *sp);
-		int	(*cpustart) (long, long, long, long);
+		int	(*cpustart) (long, void (*)(void), void *, long);
 	} _s;
 	int	(*semlock) (int sem);
 	void	(*semunlock) (int sem);
diff --git a/include/asm-mips/processor.h b/include/asm-mips/processor.h
index 1d8b9a8ae324..83bc94534084 100644
--- a/include/asm-mips/processor.h
+++ b/include/asm-mips/processor.h
@@ -62,8 +62,9 @@ extern unsigned int vced_count, vcei_count;
  * This decides where the kernel will search for a free chunk of vm
  * space during mmap's.
  */
-#define TASK_UNMAPPED_BASE	((current->thread.mflags & MF_32BIT_ADDR) ? \
-	PAGE_ALIGN(TASK_SIZE32 / 3) : PAGE_ALIGN(TASK_SIZE / 3))
+#define TASK_UNMAPPED_BASE						\
+	(test_thread_flag(TIF_32BIT_ADDR) ?				\
+		PAGE_ALIGN(TASK_SIZE32 / 3) : PAGE_ALIGN(TASK_SIZE / 3))
 #endif
 
 #define NUM_FPU_REGS	32
@@ -132,22 +133,11 @@ struct thread_struct {
 	unsigned long cp0_baduaddr;	/* Last kernel fault accessing USEG */
 	unsigned long error_code;
 	unsigned long trap_no;
-#define MF_FIXADE	1		/* Fix address errors in software */
-#define MF_LOGADE	2		/* Log address errors to syslog */
-#define MF_32BIT_REGS	4		/* also implies 16/32 fprs */
-#define MF_32BIT_ADDR	8		/* 32-bit address space (o32/n32) */
-#define MF_FPUBOUND	0x10		/* thread bound to FPU-full CPU set */
-	unsigned long mflags;
 	unsigned long irix_trampoline;  /* Wheee... */
 	unsigned long irix_oldctx;
 	struct mips_abi *abi;
 };
 
-#define MF_ABI_MASK	(MF_32BIT_REGS | MF_32BIT_ADDR)
-#define MF_O32		(MF_32BIT_REGS | MF_32BIT_ADDR)
-#define MF_N32		MF_32BIT_ADDR
-#define MF_N64		0
-
 #ifdef CONFIG_MIPS_MT_FPAFF
 #define FPAFF_INIT						\
 	.emulated_fp			= 0,			\
@@ -200,10 +190,6 @@ struct thread_struct {
 	.cp0_baduaddr		= 0,				\
 	.error_code		= 0,				\
 	.trap_no		= 0,				\
-	/*							\
-	 * For now the default is to fix address errors		\
-	 */							\
-	.mflags			= MF_FIXADE,			\
 	.irix_trampoline	= 0,				\
 	.irix_oldctx		= 0,				\
 }
diff --git a/include/asm-mips/seccomp.h b/include/asm-mips/seccomp.h
new file mode 100644
index 000000000000..36ed44070256
--- /dev/null
+++ b/include/asm-mips/seccomp.h
@@ -0,0 +1,37 @@
+#ifndef __ASM_SECCOMP_H
+
+#include <linux/thread_info.h>
+#include <linux/unistd.h>
+
+#define __NR_seccomp_read __NR_read
+#define __NR_seccomp_write __NR_write
+#define __NR_seccomp_exit __NR_exit
+#define __NR_seccomp_sigreturn __NR_rt_sigreturn
+
+/*
+ * Kludge alert:
+ *
+ * The generic seccomp code currently allows only a single compat ABI.  Until
+ * this is fixed we priorize O32 as the compat ABI over N32.
+ */
+#ifdef CONFIG_MIPS32_O32
+
+#define TIF_32BIT TIF_32BIT_REGS
+
+#define __NR_seccomp_read_32		4003
+#define __NR_seccomp_write_32		4004
+#define __NR_seccomp_exit_32		4001
+#define __NR_seccomp_sigreturn_32	4193	/* rt_sigreturn */
+
+#elif defined(CONFIG_MIPS32_N32)
+
+#define TIF_32BIT _TIF_32BIT_ADDR
+
+#define __NR_seccomp_read_32		6000
+#define __NR_seccomp_write_32		6001
+#define __NR_seccomp_exit_32		6058
+#define __NR_seccomp_sigreturn_32	6211	/* rt_sigreturn */
+
+#endif /* CONFIG_MIPS32_O32 */
+
+#endif /* __ASM_SECCOMP_H */
diff --git a/include/asm-mips/system.h b/include/asm-mips/system.h
index 8d0b1cd4a45e..357251f42518 100644
--- a/include/asm-mips/system.h
+++ b/include/asm-mips/system.h
@@ -46,10 +46,12 @@ struct task_struct;
 
 #define __mips_mt_fpaff_switch_to(prev)					\
 do {									\
+	struct thread_info *__prev_ti = task_thread_info(prev);		\
+									\
 	if (cpu_has_fpu &&						\
-	    (prev->thread.mflags & MF_FPUBOUND) &&			\
-	     (!(KSTK_STATUS(prev) & ST0_CU1))) {			\
-		prev->thread.mflags &= ~MF_FPUBOUND;			\
+	    test_ti_thread_flag(__prev_ti, TIF_FPUBOUND) &&		\
+	    (!(KSTK_STATUS(prev) & ST0_CU1))) {				\
+		clear_ti_thread_flag(__prev_ti, TIF_FPUBOUND);		\
 		prev->cpus_allowed = prev->thread.user_cpus_allowed;	\
 	}								\
 	next->thread.emulated_fp = 0;					\
diff --git a/include/asm-mips/thread_info.h b/include/asm-mips/thread_info.h
index 645e7e2a5665..b2772df1a1bd 100644
--- a/include/asm-mips/thread_info.h
+++ b/include/asm-mips/thread_info.h
@@ -46,7 +46,7 @@ struct thread_info {
 {						\
 	.task		= &tsk,			\
 	.exec_domain	= &default_exec_domain,	\
-	.flags		= 0,			\
+	.flags		= _TIF_FIXADE,		\
 	.cpu		= 0,			\
 	.preempt_count	= 1,			\
 	.addr_limit	= KERNEL_DS,		\
@@ -87,9 +87,8 @@ register struct thread_info *__current_thread_info __asm__("$28");
 ({								\
 	struct thread_info *ret;				\
 								\
-	ret = kmalloc(THREAD_SIZE, GFP_KERNEL);			\
-	if (ret)						\
-		memset(ret, 0, THREAD_SIZE);			\
+	ret = kzalloc(THREAD_SIZE, GFP_KERNEL);			\
+								\
 	ret;							\
 })
 #else
@@ -118,6 +117,11 @@ register struct thread_info *__current_thread_info __asm__("$28");
 #define TIF_POLLING_NRFLAG	17	/* true if poll_idle() is polling TIF_NEED_RESCHED */
 #define TIF_MEMDIE		18
 #define TIF_FREEZE		19
+#define TIF_FIXADE		20	/* Fix address errors in software */
+#define TIF_LOGADE		21	/* Log address errors to syslog */
+#define TIF_32BIT_REGS		22	/* also implies 16/32 fprs */
+#define TIF_32BIT_ADDR		23	/* 32-bit address space (o32/n32) */
+#define TIF_FPUBOUND		24	/* thread bound to FPU-full CPU set */
 #define TIF_SYSCALL_TRACE	31	/* syscall trace active */
 
 #define _TIF_SYSCALL_TRACE	(1<<TIF_SYSCALL_TRACE)
@@ -129,6 +133,11 @@ register struct thread_info *__current_thread_info __asm__("$28");
 #define _TIF_USEDFPU		(1<<TIF_USEDFPU)
 #define _TIF_POLLING_NRFLAG	(1<<TIF_POLLING_NRFLAG)
 #define _TIF_FREEZE		(1<<TIF_FREEZE)
+#define _TIF_FIXADE		(1<<TIF_FIXADE)
+#define _TIF_LOGADE		(1<<TIF_LOGADE)
+#define _TIF_32BIT_REGS		(1<<TIF_32BIT_REGS)
+#define _TIF_32BIT_ADDR		(1<<TIF_32BIT_ADDR)
+#define _TIF_FPUBOUND		(1<<TIF_FPUBOUND)
 
 /* work to do on interrupt/exception return */
 #define _TIF_WORK_MASK		(0x0000ffef & ~_TIF_SECCOMP)
diff --git a/include/asm-mips/tx4927/toshiba_rbtx4927.h b/include/asm-mips/tx4927/toshiba_rbtx4927.h
index 94bef03d9635..5dc40a867774 100644
--- a/include/asm-mips/tx4927/toshiba_rbtx4927.h
+++ b/include/asm-mips/tx4927/toshiba_rbtx4927.h
@@ -52,4 +52,6 @@
 #define RBTX4927_RTL_8019_BASE (0x1c020280-TBTX4927_ISA_IO_OFFSET)
 #define RBTX4927_RTL_8019_IRQ  (29)
 
+int toshiba_rbtx4927_irq_nested(int sw_irq);
+
 #endif /* __ASM_TX4927_TOSHIBA_RBTX4927_H */
diff --git a/include/asm-mips/unistd.h b/include/asm-mips/unistd.h
index ed16de0a6398..fa9a587b3bf1 100644
--- a/include/asm-mips/unistd.h
+++ b/include/asm-mips/unistd.h
@@ -340,16 +340,17 @@
 #define __NR_signalfd			(__NR_Linux + 317)
 #define __NR_timerfd			(__NR_Linux + 318)
 #define __NR_eventfd			(__NR_Linux + 319)
+#define __NR_fallocate			(__NR_Linux + 320)
 
 /*
  * Offset of the last Linux o32 flavoured syscall
  */
-#define __NR_Linux_syscalls		319
+#define __NR_Linux_syscalls		320
 
 #endif /* _MIPS_SIM == _MIPS_SIM_ABI32 */
 
 #define __NR_O32_Linux			4000
-#define __NR_O32_Linux_syscalls		319
+#define __NR_O32_Linux_syscalls		320
 
 #if _MIPS_SIM == _MIPS_SIM_ABI64
 
@@ -636,16 +637,17 @@
 #define __NR_signalfd			(__NR_Linux + 276)
 #define __NR_timerfd			(__NR_Linux + 277)
 #define __NR_eventfd			(__NR_Linux + 278)
+#define __NR_fallocate			(__NR_Linux + 279)
 
 /*
  * Offset of the last Linux 64-bit flavoured syscall
  */
-#define __NR_Linux_syscalls		278
+#define __NR_Linux_syscalls		279
 
 #endif /* _MIPS_SIM == _MIPS_SIM_ABI64 */
 
 #define __NR_64_Linux			5000
-#define __NR_64_Linux_syscalls		278
+#define __NR_64_Linux_syscalls		279
 
 #if _MIPS_SIM == _MIPS_SIM_NABI32
 
@@ -936,16 +938,17 @@
 #define __NR_signalfd			(__NR_Linux + 280)
 #define __NR_timerfd			(__NR_Linux + 281)
 #define __NR_eventfd			(__NR_Linux + 282)
+#define __NR_fallocate			(__NR_Linux + 283)
 
 /*
  * Offset of the last N32 flavoured syscall
  */
-#define __NR_Linux_syscalls		282
+#define __NR_Linux_syscalls		283
 
 #endif /* _MIPS_SIM == _MIPS_SIM_NABI32 */
 
 #define __NR_N32_Linux			6000
-#define __NR_N32_Linux_syscalls		282
+#define __NR_N32_Linux_syscalls		283
 
 #ifdef __KERNEL__
 
diff --git a/include/asm-mips/war.h b/include/asm-mips/war.h
index 2883ccc69ed0..c0715d0a6b28 100644
--- a/include/asm-mips/war.h
+++ b/include/asm-mips/war.h
@@ -182,9 +182,8 @@
  * exceptions.
  */
 #if defined(CONFIG_BASLER_EXCITE) || defined(CONFIG_MIPS_ATLAS) || \
-    defined(CONFIG_MIPS_MALTA) || defined(CONFIG_MOMENCO_OCELOT) || \
-    defined(CONFIG_PMC_YOSEMITE) || defined(CONFIG_SGI_IP32) || \
-    defined(CONFIG_WR_PPMC)
+    defined(CONFIG_MIPS_MALTA) || defined(CONFIG_PMC_YOSEMITE) || \
+    defined(CONFIG_SGI_IP32) || defined(CONFIG_WR_PPMC)
 #define ICACHE_REFILLS_WORKAROUND_WAR	1
 #endif