diff options
author | Nikolay Aleksandrov <razor@blackwall.org> | 2023-03-15 13:18:40 +0200 |
---|---|---|
committer | David S. Miller <davem@davemloft.net> | 2023-03-17 07:56:41 +0000 |
commit | 9ec7eb60dcbcb6c41076defbc5df7bbd95ceaba5 (patch) | |
tree | 48a7b835450c84174ac2b42da6e2c282bf518053 /drivers | |
parent | 53515a052adb469f47330dab3eabf701f8a7d3d9 (diff) |
bonding: restore IFF_MASTER/SLAVE flags on bond enslave ether type change
Add bond_ether_setup helper which is used to fix ether_setup() calls in the
bonding driver. It takes care of both IFF_MASTER and IFF_SLAVE flags, the
former is always restored and the latter only if it was set.
If the bond enslaves non-ARPHRD_ETHER device (changes its type), then
releases it and enslaves ARPHRD_ETHER device (changes back) then we
use ether_setup() to restore the bond device type but it also resets its
flags and removes IFF_MASTER and IFF_SLAVE[1]. Use the bond_ether_setup
helper to restore both after such transition.
[1] reproduce (nlmon is non-ARPHRD_ETHER):
$ ip l add nlmon0 type nlmon
$ ip l add bond2 type bond mode active-backup
$ ip l set nlmon0 master bond2
$ ip l set nlmon0 nomaster
$ ip l add bond1 type bond
(we use bond1 as ARPHRD_ETHER device to restore bond2's mode)
$ ip l set bond1 master bond2
$ ip l sh dev bond2
37: bond2: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000
link/ether be:d7:c5:40:5b:cc brd ff:ff:ff:ff:ff:ff promiscuity 0 minmtu 68 maxmtu 1500
(notice bond2's IFF_MASTER is missing)
Fixes: e36b9d16c6a6 ("bonding: clean muticast addresses when device changes type")
Signed-off-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'drivers')
-rw-r--r-- | drivers/net/bonding/bond_main.c | 19 |
1 files changed, 15 insertions, 4 deletions
diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c index 00646aa315c3..4bd911f9d3f9 100644 --- a/drivers/net/bonding/bond_main.c +++ b/drivers/net/bonding/bond_main.c @@ -1775,6 +1775,19 @@ void bond_lower_state_changed(struct slave *slave) slave_err(bond_dev, slave_dev, "Error: %s\n", errmsg); \ } while (0) +/* The bonding driver uses ether_setup() to convert a master bond device + * to ARPHRD_ETHER, that resets the target netdevice's flags so we always + * have to restore the IFF_MASTER flag, and only restore IFF_SLAVE if it was set + */ +static void bond_ether_setup(struct net_device *bond_dev) +{ + unsigned int slave_flag = bond_dev->flags & IFF_SLAVE; + + ether_setup(bond_dev); + bond_dev->flags |= IFF_MASTER | slave_flag; + bond_dev->priv_flags &= ~IFF_TX_SKB_SHARING; +} + /* enslave device <slave> to bond device <master> */ int bond_enslave(struct net_device *bond_dev, struct net_device *slave_dev, struct netlink_ext_ack *extack) @@ -1866,10 +1879,8 @@ int bond_enslave(struct net_device *bond_dev, struct net_device *slave_dev, if (slave_dev->type != ARPHRD_ETHER) bond_setup_by_slave(bond_dev, slave_dev); - else { - ether_setup(bond_dev); - bond_dev->priv_flags &= ~IFF_TX_SKB_SHARING; - } + else + bond_ether_setup(bond_dev); call_netdevice_notifiers(NETDEV_POST_TYPE_CHANGE, bond_dev); |