diff options
author | Joe Perches <joe@perches.com> | 2010-02-17 15:01:51 +0000 |
---|---|---|
committer | David S. Miller <davem@davemloft.net> | 2010-02-17 17:45:19 -0800 |
commit | 3a9c6a4915e584663aebdb9016bcb9d3897dd779 (patch) | |
tree | 8121d82ad6d4ab560cbad578a73757c079e742ad /drivers | |
parent | 2fc96fff4483971aa81795382c368ea7d8100dde (diff) |
drivers/net/bnx2.c: Use (pr|netdev|netif)_<level> macro helpers
Add #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
Remove #define PFX
Use pr_<level>
Use netdev_<level>
Use netif_<level>
Remove periods from formats
Coalesce long formats
Coalesce some printks
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'drivers')
-rw-r--r-- | drivers/net/bnx2.c | 145 |
1 files changed, 61 insertions, 84 deletions
diff --git a/drivers/net/bnx2.c b/drivers/net/bnx2.c index 5f0dda10f20d..a6cc9d02e589 100644 --- a/drivers/net/bnx2.c +++ b/drivers/net/bnx2.c @@ -9,6 +9,7 @@ * Written by: Michael Chan (mchan@broadcom.com) */ +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt #include <linux/module.h> #include <linux/moduleparam.h> @@ -57,7 +58,6 @@ #include "bnx2_fw.h" #define DRV_MODULE_NAME "bnx2" -#define PFX DRV_MODULE_NAME ": " #define DRV_MODULE_VERSION "2.0.8" #define DRV_MODULE_RELDATE "Feb 15, 2010" #define FW_MIPS_FILE_06 "bnx2/bnx2-mips-06-5.0.0.j6.fw" @@ -979,33 +979,27 @@ bnx2_report_link(struct bnx2 *bp) { if (bp->link_up) { netif_carrier_on(bp->dev); - printk(KERN_INFO PFX "%s NIC %s Link is Up, ", bp->dev->name, - bnx2_xceiver_str(bp)); - - printk("%d Mbps ", bp->line_speed); - - if (bp->duplex == DUPLEX_FULL) - printk("full duplex"); - else - printk("half duplex"); + netdev_info(bp->dev, "NIC %s Link is Up, %d Mbps %s duplex", + bnx2_xceiver_str(bp), + bp->line_speed, + bp->duplex == DUPLEX_FULL ? "full" : "half"); if (bp->flow_ctrl) { if (bp->flow_ctrl & FLOW_CTRL_RX) { - printk(", receive "); + pr_cont(", receive "); if (bp->flow_ctrl & FLOW_CTRL_TX) - printk("& transmit "); + pr_cont("& transmit "); } else { - printk(", transmit "); + pr_cont(", transmit "); } - printk("flow control ON"); + pr_cont("flow control ON"); } - printk("\n"); - } - else { + pr_cont("\n"); + } else { netif_carrier_off(bp->dev); - printk(KERN_ERR PFX "%s NIC %s Link is Down\n", bp->dev->name, - bnx2_xceiver_str(bp)); + netdev_err(bp->dev, "NIC %s Link is Down\n", + bnx2_xceiver_str(bp)); } bnx2_report_fw_link(bp); @@ -2482,8 +2476,7 @@ bnx2_fw_sync(struct bnx2 *bp, u32 msg_data, int ack, int silent) /* If we timed out, inform the firmware that this is the case. */ if ((val & BNX2_FW_MSG_ACK) != (msg_data & BNX2_DRV_MSG_SEQ)) { if (!silent) - printk(KERN_ERR PFX "fw sync timeout, reset code = " - "%x\n", msg_data); + pr_err("fw sync timeout, reset code = %x\n", msg_data); msg_data &= ~BNX2_DRV_MSG_CODE; msg_data |= BNX2_DRV_MSG_CODE_FW_TIMEOUT; @@ -2599,8 +2592,7 @@ bnx2_alloc_bad_rbuf(struct bnx2 *bp) good_mbuf = kmalloc(512 * sizeof(u16), GFP_KERNEL); if (good_mbuf == NULL) { - printk(KERN_ERR PFX "Failed to allocate memory in " - "bnx2_alloc_bad_rbuf\n"); + pr_err("Failed to allocate memory in %s\n", __func__); return -ENOMEM; } @@ -3656,15 +3648,13 @@ bnx2_request_firmware(struct bnx2 *bp) rc = request_firmware(&bp->mips_firmware, mips_fw_file, &bp->pdev->dev); if (rc) { - printk(KERN_ERR PFX "Can't load firmware file \"%s\"\n", - mips_fw_file); + pr_err("Can't load firmware file \"%s\"\n", mips_fw_file); return rc; } rc = request_firmware(&bp->rv2p_firmware, rv2p_fw_file, &bp->pdev->dev); if (rc) { - printk(KERN_ERR PFX "Can't load firmware file \"%s\"\n", - rv2p_fw_file); + pr_err("Can't load firmware file \"%s\"\n", rv2p_fw_file); return rc; } mips_fw = (const struct bnx2_mips_fw_file *) bp->mips_firmware->data; @@ -3675,15 +3665,13 @@ bnx2_request_firmware(struct bnx2 *bp) check_mips_fw_entry(bp->mips_firmware, &mips_fw->rxp) || check_mips_fw_entry(bp->mips_firmware, &mips_fw->tpat) || check_mips_fw_entry(bp->mips_firmware, &mips_fw->txp)) { - printk(KERN_ERR PFX "Firmware file \"%s\" is invalid\n", - mips_fw_file); + pr_err("Firmware file \"%s\" is invalid\n", mips_fw_file); return -EINVAL; } if (bp->rv2p_firmware->size < sizeof(*rv2p_fw) || check_fw_section(bp->rv2p_firmware, &rv2p_fw->proc1.rv2p, 8, true) || check_fw_section(bp->rv2p_firmware, &rv2p_fw->proc2.rv2p, 8, true)) { - printk(KERN_ERR PFX "Firmware file \"%s\" is invalid\n", - rv2p_fw_file); + pr_err("Firmware file \"%s\" is invalid\n", rv2p_fw_file); return -EINVAL; } @@ -4317,7 +4305,7 @@ bnx2_init_nvram(struct bnx2 *bp) if (j == entry_count) { bp->flash_info = NULL; - printk(KERN_ALERT PFX "Unknown flash/EEPROM type.\n"); + pr_alert("Unknown flash/EEPROM type\n"); return -ENODEV; } @@ -4737,7 +4725,7 @@ bnx2_reset_chip(struct bnx2 *bp, u32 reset_code) if (val & (BNX2_PCICFG_MISC_CONFIG_CORE_RST_REQ | BNX2_PCICFG_MISC_CONFIG_CORE_RST_BSY)) { - printk(KERN_ERR PFX "Chip reset did not complete\n"); + pr_err("Chip reset did not complete\n"); return -EBUSY; } } @@ -4745,7 +4733,7 @@ bnx2_reset_chip(struct bnx2 *bp, u32 reset_code) /* Make sure byte swapping is properly configured. */ val = REG_RD(bp, BNX2_PCI_SWAP_DIAG0); if (val != 0x01020304) { - printk(KERN_ERR PFX "Chip not in correct endian mode\n"); + pr_err("Chip not in correct endian mode\n"); return -ENODEV; } @@ -5166,9 +5154,8 @@ bnx2_init_rx_ring(struct bnx2 *bp, int ring_num) ring_prod = prod = rxr->rx_pg_prod; for (i = 0; i < bp->rx_pg_ring_size; i++) { if (bnx2_alloc_rx_page(bp, rxr, ring_prod) < 0) { - printk(KERN_WARNING PFX "%s: init'ed rx page ring %d " - "with %d/%d pages only\n", - bp->dev->name, ring_num, i, bp->rx_pg_ring_size); + netdev_warn(bp->dev, "init'ed rx page ring %d with %d/%d pages only\n", + ring_num, i, bp->rx_pg_ring_size); break; } prod = NEXT_RX_BD(prod); @@ -5179,9 +5166,8 @@ bnx2_init_rx_ring(struct bnx2 *bp, int ring_num) ring_prod = prod = rxr->rx_prod; for (i = 0; i < bp->rx_ring_size; i++) { if (bnx2_alloc_rx_skb(bp, rxr, ring_prod) < 0) { - printk(KERN_WARNING PFX "%s: init'ed rx ring %d with " - "%d/%d skbs only\n", - bp->dev->name, ring_num, i, bp->rx_ring_size); + netdev_warn(bp->dev, "init'ed rx ring %d with %d/%d skbs only\n", + ring_num, i, bp->rx_ring_size); break; } prod = NEXT_RX_BD(prod); @@ -6239,11 +6225,7 @@ bnx2_open(struct net_device *dev) * If MSI test fails, go back to INTx mode */ if (bnx2_test_intr(bp) != 0) { - printk(KERN_WARNING PFX "%s: No interrupt was generated" - " using MSI, switching to INTx mode. Please" - " report this failure to the PCI maintainer" - " and include system chipset information.\n", - bp->dev->name); + netdev_warn(bp->dev, "No interrupt was generated using MSI, switching to INTx mode. Please report this failure to the PCI maintainer and include system chipset information.\n"); bnx2_disable_int(bp); bnx2_free_irq(bp); @@ -6263,9 +6245,9 @@ bnx2_open(struct net_device *dev) } } if (bp->flags & BNX2_FLAG_USING_MSI) - printk(KERN_INFO PFX "%s: using MSI\n", dev->name); + netdev_info(dev, "using MSI\n"); else if (bp->flags & BNX2_FLAG_USING_MSIX) - printk(KERN_INFO PFX "%s: using MSIX\n", dev->name); + netdev_info(dev, "using MSIX\n"); netif_tx_start_all_queues(dev); @@ -6304,20 +6286,18 @@ bnx2_dump_state(struct bnx2 *bp) { struct net_device *dev = bp->dev; - printk(KERN_ERR PFX "%s DEBUG: intr_sem[%x]\n", dev->name, - atomic_read(&bp->intr_sem)); - printk(KERN_ERR PFX "%s DEBUG: EMAC_TX_STATUS[%08x] " - "RPM_MGMT_PKT_CTRL[%08x]\n", dev->name, - REG_RD(bp, BNX2_EMAC_TX_STATUS), - REG_RD(bp, BNX2_RPM_MGMT_PKT_CTRL)); - printk(KERN_ERR PFX "%s DEBUG: MCP_STATE_P0[%08x] MCP_STATE_P1[%08x]\n", - dev->name, bnx2_reg_rd_ind(bp, BNX2_MCP_STATE_P0), - bnx2_reg_rd_ind(bp, BNX2_MCP_STATE_P1)); - printk(KERN_ERR PFX "%s DEBUG: HC_STATS_INTERRUPT_STATUS[%08x]\n", - dev->name, REG_RD(bp, BNX2_HC_STATS_INTERRUPT_STATUS)); + netdev_err(dev, "DEBUG: intr_sem[%x]\n", atomic_read(&bp->intr_sem)); + netdev_err(dev, "DEBUG: EMAC_TX_STATUS[%08x] RPM_MGMT_PKT_CTRL[%08x]\n", + REG_RD(bp, BNX2_EMAC_TX_STATUS), + REG_RD(bp, BNX2_RPM_MGMT_PKT_CTRL)); + netdev_err(dev, "DEBUG: MCP_STATE_P0[%08x] MCP_STATE_P1[%08x]\n", + bnx2_reg_rd_ind(bp, BNX2_MCP_STATE_P0), + bnx2_reg_rd_ind(bp, BNX2_MCP_STATE_P1)); + netdev_err(dev, "DEBUG: HC_STATS_INTERRUPT_STATUS[%08x]\n", + REG_RD(bp, BNX2_HC_STATS_INTERRUPT_STATUS)); if (bp->flags & BNX2_FLAG_USING_MSIX) - printk(KERN_ERR PFX "%s DEBUG: PBA[%08x]\n", dev->name, - REG_RD(bp, BNX2_PCI_GRC_WINDOW3_BASE)); + netdev_err(dev, "DEBUG: PBA[%08x]\n", + REG_RD(bp, BNX2_PCI_GRC_WINDOW3_BASE)); } static void @@ -6381,8 +6361,7 @@ bnx2_start_xmit(struct sk_buff *skb, struct net_device *dev) if (unlikely(bnx2_tx_avail(bp, txr) < (skb_shinfo(skb)->nr_frags + 1))) { netif_tx_stop_queue(txq); - printk(KERN_ERR PFX "%s: BUG! Tx ring full when queue awake!\n", - dev->name); + netdev_err(dev, "BUG! Tx ring full when queue awake!\n"); return NETDEV_TX_BUSY; } @@ -7869,20 +7848,20 @@ bnx2_init_board(struct pci_dev *pdev, struct net_device *dev) /* enable device (incl. PCI PM wakeup), and bus-mastering */ rc = pci_enable_device(pdev); if (rc) { - dev_err(&pdev->dev, "Cannot enable PCI device, aborting.\n"); + dev_err(&pdev->dev, "Cannot enable PCI device, aborting\n"); goto err_out; } if (!(pci_resource_flags(pdev, 0) & IORESOURCE_MEM)) { dev_err(&pdev->dev, - "Cannot find PCI device base address, aborting.\n"); + "Cannot find PCI device base address, aborting\n"); rc = -ENODEV; goto err_out_disable; } rc = pci_request_regions(pdev, DRV_MODULE_NAME); if (rc) { - dev_err(&pdev->dev, "Cannot obtain PCI resources, aborting.\n"); + dev_err(&pdev->dev, "Cannot obtain PCI resources, aborting\n"); goto err_out_disable; } @@ -7892,7 +7871,7 @@ bnx2_init_board(struct pci_dev *pdev, struct net_device *dev) bp->pm_cap = pci_find_capability(pdev, PCI_CAP_ID_PM); if (bp->pm_cap == 0) { dev_err(&pdev->dev, - "Cannot find power management capability, aborting.\n"); + "Cannot find power management capability, aborting\n"); rc = -EIO; goto err_out_release; } @@ -7915,7 +7894,7 @@ bnx2_init_board(struct pci_dev *pdev, struct net_device *dev) bp->regview = ioremap_nocache(dev->base_addr, mem_len); if (!bp->regview) { - dev_err(&pdev->dev, "Cannot map register space, aborting.\n"); + dev_err(&pdev->dev, "Cannot map register space, aborting\n"); rc = -ENOMEM; goto err_out_release; } @@ -7935,7 +7914,7 @@ bnx2_init_board(struct pci_dev *pdev, struct net_device *dev) if (CHIP_NUM(bp) == CHIP_NUM_5709) { if (pci_find_capability(pdev, PCI_CAP_ID_EXP) == 0) { dev_err(&pdev->dev, - "Cannot find PCIE capability, aborting.\n"); + "Cannot find PCIE capability, aborting\n"); rc = -EIO; goto err_out_unmap; } @@ -7946,7 +7925,7 @@ bnx2_init_board(struct pci_dev *pdev, struct net_device *dev) bp->pcix_cap = pci_find_capability(pdev, PCI_CAP_ID_PCIX); if (bp->pcix_cap == 0) { dev_err(&pdev->dev, - "Cannot find PCIX capability, aborting.\n"); + "Cannot find PCIX capability, aborting\n"); rc = -EIO; goto err_out_unmap; } @@ -7975,11 +7954,11 @@ bnx2_init_board(struct pci_dev *pdev, struct net_device *dev) rc = pci_set_consistent_dma_mask(pdev, persist_dma_mask); if (rc) { dev_err(&pdev->dev, - "pci_set_consistent_dma_mask failed, aborting.\n"); + "pci_set_consistent_dma_mask failed, aborting\n"); goto err_out_unmap; } } else if ((rc = pci_set_dma_mask(pdev, DMA_BIT_MASK(32))) != 0) { - dev_err(&pdev->dev, "System does not support DMA, aborting.\n"); + dev_err(&pdev->dev, "System does not support DMA, aborting\n"); goto err_out_unmap; } @@ -7996,7 +7975,7 @@ bnx2_init_board(struct pci_dev *pdev, struct net_device *dev) !(bp->flags & BNX2_FLAG_PCIX)) { dev_err(&pdev->dev, - "5706 A1 can only be used in a PCIX bus, aborting.\n"); + "5706 A1 can only be used in a PCIX bus, aborting\n"); goto err_out_unmap; } @@ -8019,7 +7998,7 @@ bnx2_init_board(struct pci_dev *pdev, struct net_device *dev) if ((reg & BNX2_DEV_INFO_SIGNATURE_MAGIC_MASK) != BNX2_DEV_INFO_SIGNATURE_MAGIC) { - dev_err(&pdev->dev, "Firmware not running, aborting.\n"); + dev_err(&pdev->dev, "Firmware not running, aborting\n"); rc = -ENODEV; goto err_out_unmap; } @@ -8292,7 +8271,7 @@ bnx2_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) char str[40]; if (version_printed++ == 0) - printk(KERN_INFO "%s", version); + pr_info("%s", version); /* dev zeroed in init_etherdev */ dev = alloc_etherdev_mq(sizeof(*bp), TX_MAX_RINGS); @@ -8342,15 +8321,13 @@ bnx2_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) goto error; } - printk(KERN_INFO "%s: %s (%c%d) %s found at mem %lx, " - "IRQ %d, node addr %pM\n", - dev->name, - board_info[ent->driver_data].name, - ((CHIP_ID(bp) & 0xf000) >> 12) + 'A', - ((CHIP_ID(bp) & 0x0ff0) >> 4), - bnx2_bus_string(bp, str), - dev->base_addr, - bp->pdev->irq, dev->dev_addr); + netdev_info(dev, "%s (%c%d) %s found at mem %lx, IRQ %d, node addr %pM\n", + board_info[ent->driver_data].name, + ((CHIP_ID(bp) & 0xf000) >> 12) + 'A', + ((CHIP_ID(bp) & 0x0ff0) >> 4), + bnx2_bus_string(bp, str), + dev->base_addr, + bp->pdev->irq, dev->dev_addr); return 0; @@ -8485,7 +8462,7 @@ static pci_ers_result_t bnx2_io_slot_reset(struct pci_dev *pdev) rtnl_lock(); if (pci_enable_device(pdev)) { dev_err(&pdev->dev, - "Cannot re-enable PCI device after reset.\n"); + "Cannot re-enable PCI device after reset\n"); rtnl_unlock(); return PCI_ERS_RESULT_DISCONNECT; } |