Merge branch 'for-4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata

Pull libata updates from Tejun Heo:

 - Hannes's patchset implements support for better error reporting
   introduced by the new ATA command spec.

 - the deperecated pci_ dma API usages have been replaced by dma_ ones.

 - a bunch of hardware specific updates and some cleanups.

* 'for-4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata:
  ata: remove deprecated use of pci api
  ahci: st: st_configure_oob must be called after IP is clocked.
  ahci: st: Update the ahci_st DT documentation
  ahci: st: Update the DT example for how to obtain the PHY.
  sata_dwc_460ex: indent an if statement
  libata: Add tracepoints
  libata-eh: Set 'information' field for autosense
  libata: Implement support for sense data reporting
  libata: Implement NCQ autosense
  libata: use status bit definitions in ata_dump_status()
  ide,ata: Rename ATA_IDX to ATA_SENSE
  libata: whitespace fixes in ata_to_sense_error()
  libata: whitespace cleanup in ata_get_cmd_descript()
  libata: use READ_LOG_DMA_EXT
  libata: remove ATA_FLAG_LOWTAG
  sata_dwc_460ex: re-use hsdev->dev instead of dwc_dev
  sata_dwc_460ex: move to generic DMA driver
  sata_dwc_460ex: join messages back
  sata: xgene: add ACPI support for APM X-Gene SATA ports
  ata: sata_mv: add proper definitions for LP_PHY_CTL register values

34 files changed, 707 insertions, 818 deletions

diff --git a/drivers/ata/Makefile b/drivers/ata/Makefile
index ae41107afc1f..b67e995179a9 100644
--- a/drivers/ata/Makefile
+++ b/drivers/ata/Makefile
@@ -111,7 +111,8 @@ obj-$(CONFIG_ATA_GENERIC)	+= ata_generic.o
 # Should be last libata driver
 obj-$(CONFIG_PATA_LEGACY)	+= pata_legacy.o
 
-libata-y	:= libata-core.o libata-scsi.o libata-eh.o libata-transport.o
+libata-y	:= libata-core.o libata-scsi.o libata-eh.o \
+	libata-transport.o libata-trace.o
 libata-$(CONFIG_ATA_SFF)	+= libata-sff.o
 libata-$(CONFIG_SATA_PMP)	+= libata-pmp.o
 libata-$(CONFIG_ATA_ACPI)	+= libata-acpi.o
diff --git a/drivers/ata/acard-ahci.c b/drivers/ata/acard-ahci.c
index c962886d7e71..12489ce863c4 100644
--- a/drivers/ata/acard-ahci.c
+++ b/drivers/ata/acard-ahci.c
@@ -181,10 +181,10 @@ static int acard_ahci_configure_dma_masks(struct pci_dev *pdev, int using_dac)
 	int rc;
 
 	if (using_dac &&
-	    !pci_set_dma_mask(pdev, DMA_BIT_MASK(64))) {
-		rc = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(64));
+	    !dma_set_mask(&pdev->dev, DMA_BIT_MASK(64))) {
+		rc = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(64));
 		if (rc) {
-			rc = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32));
+			rc = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32));
 			if (rc) {
 				dev_err(&pdev->dev,
 					   "64-bit DMA enable failed\n");
@@ -192,12 +192,12 @@ static int acard_ahci_configure_dma_masks(struct pci_dev *pdev, int using_dac)
 			}
 		}
 	} else {
-		rc = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
+		rc = dma_set_mask(&pdev->dev, DMA_BIT_MASK(32));
 		if (rc) {
 			dev_err(&pdev->dev, "32-bit DMA enable failed\n");
 			return rc;
 		}
-		rc = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32));
+		rc = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32));
 		if (rc) {
 			dev_err(&pdev->dev,
 				"32-bit consistent DMA enable failed\n");
diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index 33bb06e006c9..c7a92a743ed0 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -738,10 +738,10 @@ static int ahci_configure_dma_masks(struct pci_dev *pdev, int using_dac)
 		return 0;
 
 	if (using_dac &&
-	    !pci_set_dma_mask(pdev, DMA_BIT_MASK(64))) {
-		rc = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(64));
+	    !dma_set_mask(&pdev->dev, DMA_BIT_MASK(64))) {
+		rc = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(64));
 		if (rc) {
-			rc = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32));
+			rc = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32));
 			if (rc) {
 				dev_err(&pdev->dev,
 					"64-bit DMA enable failed\n");
@@ -749,12 +749,12 @@ static int ahci_configure_dma_masks(struct pci_dev *pdev, int using_dac)
 			}
 		}
 	} else {
-		rc = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
+		rc = dma_set_mask(&pdev->dev, DMA_BIT_MASK(32));
 		if (rc) {
 			dev_err(&pdev->dev, "32-bit DMA enable failed\n");
 			return rc;
 		}
-		rc = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32));
+		rc = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32));
 		if (rc) {
 			dev_err(&pdev->dev,
 				"32-bit consistent DMA enable failed\n");
diff --git a/drivers/ata/ahci_st.c b/drivers/ata/ahci_st.c
index bc971af262e7..ea0ff005b86c 100644
--- a/drivers/ata/ahci_st.c
+++ b/drivers/ata/ahci_st.c
@@ -68,8 +68,6 @@ static int st_ahci_deassert_resets(struct device *dev)
 		}
 	}
 
-	st_ahci_configure_oob(drv_data->hpriv->mmio);
-
 	if (drv_data->sw_rst) {
 		err = reset_control_deassert(drv_data->sw_rst);
 		if (err) {
@@ -172,6 +170,8 @@ static int st_ahci_probe(struct platform_device *pdev)
 	if (err)
 		return err;
 
+	st_ahci_configure_oob(drv_data->hpriv->mmio);
+
 	err = ahci_platform_init_host(pdev, hpriv, &st_ahci_port_info,
 				      &ahci_platform_sht);
 	if (err) {
@@ -222,6 +222,8 @@ static int st_ahci_resume(struct device *dev)
 		return err;
 	}
 
+	st_ahci_configure_oob(drv_data->hpriv->mmio);
+
 	return ahci_platform_resume_host(dev);
 }
 #endif
diff --git a/drivers/ata/ahci_xgene.c b/drivers/ata/ahci_xgene.c
index 2e8bb603e447..2b78510d94dd 100644
--- a/drivers/ata/ahci_xgene.c
+++ b/drivers/ata/ahci_xgene.c
@@ -22,6 +22,7 @@
  * NOTE: PM support is not currently available.
  *
  */
+#include <linux/acpi.h>
 #include <linux/module.h>
 #include <linux/platform_device.h>
 #include <linux/ahci_platform.h>
@@ -718,6 +719,14 @@ disable_resources:
 	return rc;
 }
 
+#ifdef CONFIG_ACPI
+static const struct acpi_device_id xgene_ahci_acpi_match[] = {
+	{ "APMC0D0D", },
+	{ }
+};
+MODULE_DEVICE_TABLE(acpi, xgene_ahci_acpi_match);
+#endif
+
 static const struct of_device_id xgene_ahci_of_match[] = {
 	{.compatible = "apm,xgene-ahci"},
 	{},
@@ -730,6 +739,7 @@ static struct platform_driver xgene_ahci_driver = {
 	.driver = {
 		.name = DRV_NAME,
 		.of_match_table = xgene_ahci_of_match,
+		.acpi_match_table = ACPI_PTR(xgene_ahci_acpi_match),
 	},
 };
 
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index 23dac3babfe3..f6cb1f1b30b7 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -70,6 +70,9 @@
 #include <linux/pm_runtime.h>
 #include <linux/platform_device.h>
 
+#define CREATE_TRACE_POINTS
+#include <trace/events/libata.h>
+
 #include "libata.h"
 #include "libata-transport.h"
 
@@ -691,11 +694,11 @@ static int ata_rwcmd_protocol(struct ata_taskfile *tf, struct ata_device *dev)
  *	RETURNS:
  *	Block address read from @tf.
  */
-u64 ata_tf_read_block(struct ata_taskfile *tf, struct ata_device *dev)
+u64 ata_tf_read_block(const struct ata_taskfile *tf, struct ata_device *dev)
 {
 	u64 block = 0;
 
-	if (tf->flags & ATA_TFLAG_LBA) {
+	if (!dev || tf->flags & ATA_TFLAG_LBA) {
 		if (tf->flags & ATA_TFLAG_LBA48) {
 			block |= (u64)tf->hob_lbah << 40;
 			block |= (u64)tf->hob_lbam << 32;
@@ -2144,6 +2147,24 @@ static int ata_dev_config_ncq(struct ata_device *dev,
 	return 0;
 }
 
+static void ata_dev_config_sense_reporting(struct ata_device *dev)
+{
+	unsigned int err_mask;
+
+	if (!ata_id_has_sense_reporting(dev->id))
+		return;
+
+	if (ata_id_sense_reporting_enabled(dev->id))
+		return;
+
+	err_mask = ata_dev_set_feature(dev, SETFEATURE_SENSE_DATA, 0x1);
+	if (err_mask) {
+		ata_dev_dbg(dev,
+			    "failed to enable Sense Data Reporting, Emask 0x%x\n",
+			    err_mask);
+	}
+}
+
 /**
  *	ata_dev_configure - Configure the specified ATA/ATAPI device
  *	@dev: Target device to configure
@@ -2366,7 +2387,7 @@ int ata_dev_configure(struct ata_device *dev)
 					dev->devslp_timing[i] = sata_setting[j];
 				}
 		}
-
+		ata_dev_config_sense_reporting(dev);
 		dev->cdb_len = 16;
 	}
 
@@ -4897,6 +4918,7 @@ void ata_qc_complete(struct ata_queued_cmd *qc)
 		 */
 		if (unlikely(ata_tag_internal(qc->tag))) {
 			fill_result_tf(qc);
+			trace_ata_qc_complete_internal(qc);
 			__ata_qc_complete(qc);
 			return;
 		}
@@ -4907,6 +4929,7 @@ void ata_qc_complete(struct ata_queued_cmd *qc)
 		 */
 		if (unlikely(qc->flags & ATA_QCFLAG_FAILED)) {
 			fill_result_tf(qc);
+			trace_ata_qc_complete_failed(qc);
 			ata_qc_schedule_eh(qc);
 			return;
 		}
@@ -4917,6 +4940,7 @@ void ata_qc_complete(struct ata_queued_cmd *qc)
 		if (qc->flags & ATA_QCFLAG_RESULT_TF)
 			fill_result_tf(qc);
 
+		trace_ata_qc_complete_done(qc);
 		/* Some commands need post-processing after successful
 		 * completion.
 		 */
@@ -5064,7 +5088,7 @@ void ata_qc_issue(struct ata_queued_cmd *qc)
 	}
 
 	ap->ops->qc_prep(qc);
-
+	trace_ata_qc_issue(qc);
 	qc->err_mask |= ap->ops->qc_issue(qc);
 	if (unlikely(qc->err_mask))
 		goto err;
diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c
index d2029a462e2c..07f41be38fbe 100644
--- a/drivers/ata/libata-eh.c
+++ b/drivers/ata/libata-eh.c
@@ -46,6 +46,7 @@
 
 #include <linux/libata.h>
 
+#include <trace/events/libata.h>
 #include "libata.h"
 
 enum {
@@ -1510,13 +1511,18 @@ unsigned int ata_read_log_page(struct ata_device *dev, u8 log,
 	DPRINTK("read log page - log 0x%x, page 0x%x\n", log, page);
 
 	ata_tf_init(dev, &tf);
-	tf.command = ATA_CMD_READ_LOG_EXT;
+	if (dev->dma_mode && ata_id_has_read_log_dma_ext(dev->id)) {
+		tf.command = ATA_CMD_READ_LOG_DMA_EXT;
+		tf.protocol = ATA_PROT_DMA;
+	} else {
+		tf.command = ATA_CMD_READ_LOG_EXT;
+		tf.protocol = ATA_PROT_PIO;
+	}
 	tf.lbal = log;
 	tf.lbam = page;
 	tf.nsect = sectors;
 	tf.hob_nsect = sectors >> 8;
 	tf.flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_LBA48 | ATA_TFLAG_DEVICE;
-	tf.protocol = ATA_PROT_PIO;
 
 	err_mask = ata_exec_internal(dev, &tf, NULL, DMA_FROM_DEVICE,
 				     buf, sectors * ATA_SECT_SIZE, 0);
@@ -1575,6 +1581,8 @@ static int ata_eh_read_log_10h(struct ata_device *dev,
 	tf->hob_lbah = buf[10];
 	tf->nsect = buf[12];
 	tf->hob_nsect = buf[13];
+	if (ata_id_has_ncq_autosense(dev->id))
+		tf->auxiliary = buf[14] << 16 | buf[15] << 8 | buf[16];
 
 	return 0;
 }
@@ -1611,6 +1619,70 @@ unsigned int atapi_eh_tur(struct ata_device *dev, u8 *r_sense_key)
 }
 
 /**
+ *	ata_eh_request_sense - perform REQUEST_SENSE_DATA_EXT
+ *	@dev: device to perform REQUEST_SENSE_SENSE_DATA_EXT to
+ *	@sense_buf: result sense data buffer (SCSI_SENSE_BUFFERSIZE bytes long)
+ *	@dfl_sense_key: default sense key to use
+ *
+ *	Perform REQUEST_SENSE_DATA_EXT after the device reported CHECK
+ *	SENSE.  This function is EH helper.
+ *
+ *	LOCKING:
+ *	Kernel thread context (may sleep).
+ *
+ *	RETURNS:
+ *	encoded sense data on success, 0 on failure or if sense data
+ *	is not available.
+ */
+static u32 ata_eh_request_sense(struct ata_queued_cmd *qc,
+				struct scsi_cmnd *cmd)
+{
+	struct ata_device *dev = qc->dev;
+	struct ata_taskfile tf;
+	unsigned int err_mask;
+
+	if (!cmd)
+		return 0;
+
+	DPRINTK("ATA request sense\n");
+	ata_dev_warn(dev, "request sense\n");
+	if (!ata_id_sense_reporting_enabled(dev->id)) {
+		ata_dev_warn(qc->dev, "sense data reporting disabled\n");
+		return 0;
+	}
+	ata_tf_init(dev, &tf);
+
+	tf.flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE;
+	tf.flags |= ATA_TFLAG_LBA | ATA_TFLAG_LBA48;
+	tf.command = ATA_CMD_REQ_SENSE_DATA;
+	tf.protocol = ATA_PROT_NODATA;
+
+	err_mask = ata_exec_internal(dev, &tf, NULL, DMA_NONE, NULL, 0, 0);
+	/*
+	 * ACS-4 states:
+	 * The device may set the SENSE DATA AVAILABLE bit to one in the
+	 * STATUS field and clear the ERROR bit to zero in the STATUS field
+	 * to indicate that the command returned completion without an error
+	 * and the sense data described in table 306 is available.
+	 *
+	 * IOW the 'ATA_SENSE' bit might not be set even though valid
+	 * sense data is available.
+	 * So check for both.
+	 */
+	if ((tf.command & ATA_SENSE) ||
+		tf.lbah != 0 || tf.lbam != 0 || tf.lbal != 0) {
+		ata_scsi_set_sense(cmd, tf.lbah, tf.lbam, tf.lbal);
+		qc->flags |= ATA_QCFLAG_SENSE_VALID;
+		ata_dev_warn(dev, "sense data %02x/%02x/%02x\n",
+			     tf.lbah, tf.lbam, tf.lbal);
+	} else {
+		ata_dev_warn(dev, "request sense failed stat %02x emask %x\n",
+			     tf.command, err_mask);
+	}
+	return err_mask;
+}
+
+/**
  *	atapi_eh_request_sense - perform ATAPI REQUEST_SENSE
  *	@dev: device to perform REQUEST_SENSE to
  *	@sense_buf: result sense data buffer (SCSI_SENSE_BUFFERSIZE bytes long)
@@ -1772,6 +1844,19 @@ void ata_eh_analyze_ncq_error(struct ata_link *link)
 	memcpy(&qc->result_tf, &tf, sizeof(tf));
 	qc->result_tf.flags = ATA_TFLAG_ISADDR | ATA_TFLAG_LBA | ATA_TFLAG_LBA48;
 	qc->err_mask |= AC_ERR_DEV | AC_ERR_NCQ;
+	if (qc->result_tf.auxiliary) {
+		char sense_key, asc, ascq;
+
+		sense_key = (qc->result_tf.auxiliary >> 16) & 0xff;
+		asc = (qc->result_tf.auxiliary >> 8) & 0xff;
+		ascq = qc->result_tf.auxiliary & 0xff;
+		ata_dev_dbg(dev, "NCQ Autosense %02x/%02x/%02x\n",
+			    sense_key, asc, ascq);
+		ata_scsi_set_sense(qc->scsicmd, sense_key, asc, ascq);
+		ata_scsi_set_sense_information(qc->scsicmd, &qc->result_tf);
+		qc->flags |= ATA_QCFLAG_SENSE_VALID;
+	}
+
 	ehc->i.err_mask &= ~AC_ERR_DEV;
 }
 
@@ -1801,6 +1886,27 @@ static unsigned int ata_eh_analyze_tf(struct ata_queued_cmd *qc,
 		return ATA_EH_RESET;
 	}
 
+	/*
+	 * Sense data reporting does not work if the
+	 * device fault bit is set.
+	 */
+	if ((stat & ATA_SENSE) && !(stat & ATA_DF) &&
+	    !(qc->flags & ATA_QCFLAG_SENSE_VALID)) {
+		if (!(qc->ap->pflags & ATA_PFLAG_FROZEN)) {
+			tmp = ata_eh_request_sense(qc, qc->scsicmd);
+			if (tmp)
+				qc->err_mask |= tmp;
+			else
+				ata_scsi_set_sense_information(qc->scsicmd, tf);
+		} else {
+			ata_dev_warn(qc->dev, "sense data available but port frozen\n");
+		}
+	}
+
+	/* Set by NCQ autosense or request sense above */
+	if (qc->flags & ATA_QCFLAG_SENSE_VALID)
+		return 0;
+
 	if (stat & (ATA_ERR | ATA_DF))
 		qc->err_mask |= AC_ERR_DEV;
 	else
@@ -2186,6 +2292,7 @@ static void ata_eh_link_autopsy(struct ata_link *link)
 		all_err_mask |= qc->err_mask;
 		if (qc->flags & ATA_QCFLAG_IO)
 			eflags |= ATA_EFLAG_IS_IO;
+		trace_ata_eh_link_autopsy_qc(qc);
 	}
 
 	/* enforce default EH actions */
@@ -2220,7 +2327,7 @@ static void ata_eh_link_autopsy(struct ata_link *link)
 			eflags |= ATA_EFLAG_DUBIOUS_XFER;
 		ehc->i.action |= ata_eh_speed_down(dev, eflags, all_err_mask);
 	}
-
+	trace_ata_eh_link_autopsy(dev, ehc->i.action, all_err_mask);
 	DPRINTK("EXIT\n");
 }
 
@@ -2289,27 +2396,27 @@ const char *ata_get_cmd_descript(u8 command)
 		const char *text;
 	} cmd_descr[] = {
 		{ ATA_CMD_DEV_RESET,		"DEVICE RESET" },
-		{ ATA_CMD_CHK_POWER, 		"CHECK POWER MODE" },
-		{ ATA_CMD_STANDBY, 		"STANDBY" },
-		{ ATA_CMD_IDLE, 		"IDLE" },
-		{ ATA_CMD_EDD, 			"EXECUTE DEVICE DIAGNOSTIC" },
-		{ ATA_CMD_DOWNLOAD_MICRO,   	"DOWNLOAD MICROCODE" },
+		{ ATA_CMD_CHK_POWER,		"CHECK POWER MODE" },
+		{ ATA_CMD_STANDBY,		"STANDBY" },
+		{ ATA_CMD_IDLE,			"IDLE" },
+		{ ATA_CMD_EDD,			"EXECUTE DEVICE DIAGNOSTIC" },
+		{ ATA_CMD_DOWNLOAD_MICRO,	"DOWNLOAD MICROCODE" },
 		{ ATA_CMD_DOWNLOAD_MICRO_DMA,	"DOWNLOAD MICROCODE DMA" },
 		{ ATA_CMD_NOP,			"NOP" },
-		{ ATA_CMD_FLUSH, 		"FLUSH CACHE" },
-		{ ATA_CMD_FLUSH_EXT, 		"FLUSH CACHE EXT" },
-		{ ATA_CMD_ID_ATA,  		"IDENTIFY DEVICE" },
-		{ ATA_CMD_ID_ATAPI, 		"IDENTIFY PACKET DEVICE" },
-		{ ATA_CMD_SERVICE, 		"SERVICE" },
-		{ ATA_CMD_READ, 		"READ DMA" },
-		{ ATA_CMD_READ_EXT, 		"READ DMA EXT" },
-		{ ATA_CMD_READ_QUEUED, 		"READ DMA QUEUED" },
-		{ ATA_CMD_READ_STREAM_EXT, 	"READ STREAM EXT" },
+		{ ATA_CMD_FLUSH,		"FLUSH CACHE" },
+		{ ATA_CMD_FLUSH_EXT,		"FLUSH CACHE EXT" },
+		{ ATA_CMD_ID_ATA,		"IDENTIFY DEVICE" },
+		{ ATA_CMD_ID_ATAPI,		"IDENTIFY PACKET DEVICE" },
+		{ ATA_CMD_SERVICE,		"SERVICE" },
+		{ ATA_CMD_READ,			"READ DMA" },
+		{ ATA_CMD_READ_EXT,		"READ DMA EXT" },
+		{ ATA_CMD_READ_QUEUED,		"READ DMA QUEUED" },
+		{ ATA_CMD_READ_STREAM_EXT,	"READ STREAM EXT" },
 		{ ATA_CMD_READ_STREAM_DMA_EXT,  "READ STREAM DMA EXT" },
-		{ ATA_CMD_WRITE, 		"WRITE DMA" },
-		{ ATA_CMD_WRITE_EXT, 		"WRITE DMA EXT" },
-		{ ATA_CMD_WRITE_QUEUED, 	"WRITE DMA QUEUED EXT" },
-		{ ATA_CMD_WRITE_STREAM_EXT, 	"WRITE STREAM EXT" },
+		{ ATA_CMD_WRITE,		"WRITE DMA" },
+		{ ATA_CMD_WRITE_EXT,		"WRITE DMA EXT" },
+		{ ATA_CMD_WRITE_QUEUED,		"WRITE DMA QUEUED EXT" },
+		{ ATA_CMD_WRITE_STREAM_EXT,	"WRITE STREAM EXT" },
 		{ ATA_CMD_WRITE_STREAM_DMA_EXT, "WRITE STREAM DMA EXT" },
 		{ ATA_CMD_WRITE_FUA_EXT,	"WRITE DMA FUA EXT" },
 		{ ATA_CMD_WRITE_QUEUED_FUA_EXT, "WRITE DMA QUEUED FUA EXT" },
@@ -2325,7 +2432,7 @@ const char *ata_get_cmd_descript(u8 command)
 		{ ATA_CMD_READ_MULTI_EXT,	"READ MULTIPLE EXT" },
 		{ ATA_CMD_WRITE_MULTI,		"WRITE MULTIPLE" },
 		{ ATA_CMD_WRITE_MULTI_EXT,	"WRITE MULTIPLE EXT" },
-		{ ATA_CMD_WRITE_MULTI_FUA_EXT, 	"WRITE MULTIPLE FUA EXT" },
+		{ ATA_CMD_WRITE_MULTI_FUA_EXT,	"WRITE MULTIPLE FUA EXT" },
 		{ ATA_CMD_SET_FEATURES,		"SET FEATURES" },
 		{ ATA_CMD_SET_MULTI,		"SET MULTIPLE MODE" },
 		{ ATA_CMD_VERIFY,		"READ VERIFY SECTOR(S)" },
@@ -2342,12 +2449,12 @@ const char *ata_get_cmd_descript(u8 command)
 		{ ATA_CMD_READ_LOG_EXT,		"READ LOG EXT" },
 		{ ATA_CMD_WRITE_LOG_EXT,	"WRITE LOG EXT" },
 		{ ATA_CMD_READ_LOG_DMA_EXT,	"READ LOG DMA EXT" },
-		{ ATA_CMD_WRITE_LOG_DMA_EXT, 	"WRITE LOG DMA EXT" },
+		{ ATA_CMD_WRITE_LOG_DMA_EXT,	"WRITE LOG DMA EXT" },
 		{ ATA_CMD_TRUSTED_NONDATA,	"TRUSTED NON-DATA" },
 		{ ATA_CMD_TRUSTED_RCV,		"TRUSTED RECEIVE" },
-		{ ATA_CMD_TRUSTED_RCV_DMA, 	"TRUSTED RECEIVE DMA" },
+		{ ATA_CMD_TRUSTED_RCV_DMA,	"TRUSTED RECEIVE DMA" },
 		{ ATA_CMD_TRUSTED_SND,		"TRUSTED SEND" },
-		{ ATA_CMD_TRUSTED_SND_DMA, 	"TRUSTED SEND DMA" },
+		{ ATA_CMD_TRUSTED_SND_DMA,	"TRUSTED SEND DMA" },
 		{ ATA_CMD_PMP_READ,		"READ BUFFER" },
 		{ ATA_CMD_PMP_READ_DMA,		"READ BUFFER DMA" },
 		{ ATA_CMD_PMP_WRITE,		"WRITE BUFFER" },
@@ -2364,12 +2471,12 @@ const char *ata_get_cmd_descript(u8 command)
 		{ ATA_CMD_MEDIA_LOCK,		"DOOR LOCK" },
 		{ ATA_CMD_MEDIA_UNLOCK,		"DOOR UNLOCK" },
 		{ ATA_CMD_DSM,			"DATA SET MANAGEMENT" },
-		{ ATA_CMD_CHK_MED_CRD_TYP, 	"CHECK MEDIA CARD TYPE" },
-		{ ATA_CMD_CFA_REQ_EXT_ERR, 	"CFA REQUEST EXTENDED ERROR" },
+		{ ATA_CMD_CHK_MED_CRD_TYP,	"CHECK MEDIA CARD TYPE" },
+		{ ATA_CMD_CFA_REQ_EXT_ERR,	"CFA REQUEST EXTENDED ERROR" },
 		{ ATA_CMD_CFA_WRITE_NE,		"CFA WRITE SECTORS WITHOUT ERASE" },
 		{ ATA_CMD_CFA_TRANS_SECT,	"CFA TRANSLATE SECTOR" },
 		{ ATA_CMD_CFA_ERASE,		"CFA ERASE SECTORS" },
-		{ ATA_CMD_CFA_WRITE_MULT_NE, 	"CFA WRITE MULTIPLE WITHOUT ERASE" },
+		{ ATA_CMD_CFA_WRITE_MULT_NE,	"CFA WRITE MULTIPLE WITHOUT ERASE" },
 		{ ATA_CMD_REQ_SENSE_DATA,	"REQUEST SENSE DATA EXT" },
 		{ ATA_CMD_SANITIZE_DEVICE,	"SANITIZE DEVICE" },
 		{ ATA_CMD_READ_LONG,		"READ LONG (with retries)" },
@@ -2543,14 +2650,15 @@ static void ata_eh_link_report(struct ata_link *link)
 
 #ifdef CONFIG_ATA_VERBOSE_ERROR
 		if (res->command & (ATA_BUSY | ATA_DRDY | ATA_DF | ATA_DRQ |
-				    ATA_ERR)) {
+				    ATA_SENSE | ATA_ERR)) {
 			if (res->command & ATA_BUSY)
 				ata_dev_err(qc->dev, "status: { Busy }\n");
 			else
-				ata_dev_err(qc->dev, "status: { %s%s%s%s}\n",
+				ata_dev_err(qc->dev, "status: { %s%s%s%s%s}\n",
 				  res->command & ATA_DRDY ? "DRDY " : "",
 				  res->command & ATA_DF ? "DF " : "",
 				  res->command & ATA_DRQ ? "DRQ " : "",
+				  res->command & ATA_SENSE ? "SENSE " : "",
 				  res->command & ATA_ERR ? "ERR " : "");
 		}
 
diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c
index b061ba2c31d8..3131adcc1f87 100644
--- a/drivers/ata/libata-scsi.c
+++ b/drivers/ata/libata-scsi.c
@@ -270,13 +270,28 @@ DEVICE_ATTR(unload_heads, S_IRUGO | S_IWUSR,
 	    ata_scsi_park_show, ata_scsi_park_store);
 EXPORT_SYMBOL_GPL(dev_attr_unload_heads);
 
-static void ata_scsi_set_sense(struct scsi_cmnd *cmd, u8 sk, u8 asc, u8 ascq)
+void ata_scsi_set_sense(struct scsi_cmnd *cmd, u8 sk, u8 asc, u8 ascq)
 {
+	if (!cmd)
+		return;
+
 	cmd->result = (DRIVER_SENSE << 24) | SAM_STAT_CHECK_CONDITION;
 
 	scsi_build_sense_buffer(0, cmd->sense_buffer, sk, asc, ascq);
 }
 
+void ata_scsi_set_sense_information(struct scsi_cmnd *cmd,
+				    const struct ata_taskfile *tf)
+{
+	u64 information;
+
+	if (!cmd)
+		return;
+
+	information = ata_tf_read_block(tf, NULL);
+	scsi_set_sense_information(cmd->sense_buffer, information);
+}
+
 static ssize_t
 ata_scsi_em_message_store(struct device *dev, struct device_attribute *attr,
 			  const char *buf, size_t count)
@@ -799,26 +814,27 @@ static void ata_dump_status(unsigned id, struct ata_taskfile *tf)
 	if (stat & ATA_BUSY) {
 		printk("Busy }\n");	/* Data is not valid in this case */
 	} else {
-		if (stat & 0x40)	printk("DriveReady ");
-		if (stat & 0x20)	printk("DeviceFault ");
-		if (stat & 0x10)	printk("SeekComplete ");
-		if (stat & 0x08)	printk("DataRequest ");
-		if (stat & 0x04)	printk("CorrectedError ");
-		if (stat & 0x02)	printk("Index ");
-		if (stat & 0x01)	printk("Error ");
+		if (stat & ATA_DRDY)	printk("DriveReady ");
+		if (stat & ATA_DF)	printk("DeviceFault ");
+		if (stat & ATA_DSC)	printk("SeekComplete ");
+		if (stat & ATA_DRQ)	printk("DataRequest ");
+		if (stat & ATA_CORR)	printk("CorrectedError ");
+		if (stat & ATA_SENSE)	printk("Sense ");
+		if (stat & ATA_ERR)	printk("Error ");
 		printk("}\n");
 
 		if (err) {
 			printk(KERN_WARNING "ata%u: error=0x%02x { ", id, err);
-			if (err & 0x04)		printk("DriveStatusError ");
-			if (err & 0x80) {
-				if (err & 0x04)	printk("BadCRC ");
+			if (err & ATA_ABORTED)	printk("DriveStatusError ");
+			if (err & ATA_ICRC) {
+				if (err & ATA_ABORTED)
+						printk("BadCRC ");
 				else		printk("Sector ");
 			}
-			if (err & 0x40)		printk("UncorrectableError ");
-			if (err & 0x10)		printk("SectorIdNotFound ");
-			if (err & 0x02)		printk("TrackZeroNotFound ");
-			if (err & 0x01)		printk("AddrMarkNotFound ");
+			if (err & ATA_UNC)	printk("UncorrectableError ");
+			if (err & ATA_IDNF)	printk("SectorIdNotFound ");
+			if (err & ATA_TRK0NF)	printk("TrackZeroNotFound ");
+			if (err & ATA_AMNF)	printk("AddrMarkNotFound ");
 			printk("}\n");
 		}
 	}
@@ -849,40 +865,59 @@ static void ata_to_sense_error(unsigned id, u8 drv_stat, u8 drv_err, u8 *sk,
 	/* Based on the 3ware driver translation table */
 	static const unsigned char sense_table[][4] = {
 		/* BBD|ECC|ID|MAR */
-		{0xd1, 		ABORTED_COMMAND, 0x00, 0x00}, 	// Device busy                  Aborted command
+		{0xd1,		ABORTED_COMMAND, 0x00, 0x00},
+			// Device busy                  Aborted command
 		/* BBD|ECC|ID */
-		{0xd0,  	ABORTED_COMMAND, 0x00, 0x00}, 	// Device busy                  Aborted command
+		{0xd0,		ABORTED_COMMAND, 0x00, 0x00},
+			// Device busy                  Aborted command
 		/* ECC|MC|MARK */
-		{0x61, 		HARDWARE_ERROR, 0x00, 0x00}, 	// Device fault                 Hardware error
+		{0x61,		HARDWARE_ERROR, 0x00, 0x00},
+			// Device fault                 Hardware error
 		/* ICRC|ABRT */		/* NB: ICRC & !ABRT is BBD */
-		{0x84, 		ABORTED_COMMAND, 0x47, 0x00}, 	// Data CRC error               SCSI parity error
+		{0x84,		ABORTED_COMMAND, 0x47, 0x00},
+			// Data CRC error               SCSI parity error
 		/* MC|ID|ABRT|TRK0|MARK */
-		{0x37, 		NOT_READY, 0x04, 0x00}, 	// Unit offline                 Not ready
+		{0x37,		NOT_READY, 0x04, 0x00},
+			// Unit offline                 Not ready
 		/* MCR|MARK */
-		{0x09, 		NOT_READY, 0x04, 0x00}, 	// Unrecovered disk error       Not ready
+		{0x09,		NOT_READY, 0x04, 0x00},
+			// Unrecovered disk error       Not ready
 		/*  Bad address mark */
-		{0x01, 		MEDIUM_ERROR, 0x13, 0x00}, 	// Address mark not found       Address mark not found for data field
-		/* TRK0 */
-		{0x02, 		HARDWARE_ERROR, 0x00, 0x00}, 	// Track 0 not found		Hardware error
+		{0x01,		MEDIUM_ERROR, 0x13, 0x00},
+			// Address mark not found for data field
+		/* TRK0 - Track 0 not found */
+		{0x02,		HARDWARE_ERROR, 0x00, 0x00},
+			// Hardware error
 		/* Abort: 0x04 is not translated here, see below */
 		/* Media change request */
-		{0x08, 		NOT_READY, 0x04, 0x00}, 	// Media change request	  FIXME: faking offline
-		/* SRV/IDNF */
-		{0x10, 		ILLEGAL_REQUEST, 0x21, 0x00}, 	// ID not found                 Logical address out of range
-		/* MC */
-		{0x20, 		UNIT_ATTENTION, 0x28, 0x00}, 	// Media Changed		Not ready to ready change, medium may have changed
-		/* ECC */
-		{0x40, 		MEDIUM_ERROR, 0x11, 0x04}, 	// Uncorrectable ECC error      Unrecovered read error
+		{0x08,		NOT_READY, 0x04, 0x00},
+			// FIXME: faking offline
+		/* SRV/IDNF - ID not found */
+		{0x10,		ILLEGAL_REQUEST, 0x21, 0x00},
+			// Logical address out of range
+		/* MC - Media Changed */
+		{0x20,		UNIT_ATTENTION, 0x28, 0x00},
+			// Not ready to ready change, medium may have changed
+		/* ECC - Uncorrectable ECC error */
+		{0x40,		MEDIUM_ERROR, 0x11, 0x04},
+			// Unrecovered read error
 		/* BBD - block marked bad */
-		{0x80, 		MEDIUM_ERROR, 0x11, 0x04}, 	// Block marked bad		Medium error, unrecovered read error
+		{0x80,		MEDIUM_ERROR, 0x11, 0x04},
+			// Block marked bad	Medium error, unrecovered read error
 		{0xFF, 0xFF, 0xFF, 0xFF}, // END mark
 	};
 	static const unsigned char stat_table[][4] = {
 		/* Must be first because BUSY means no other bits valid */
-		{0x80, 		ABORTED_COMMAND, 0x47, 0x00},	// Busy, fake parity for now
-		{0x20, 		HARDWARE_ERROR,  0x44, 0x00}, 	// Device fault, internal target failure
-		{0x08, 		ABORTED_COMMAND, 0x47, 0x00},	// Timed out in xfer, fake parity for now
-		{0x04, 		RECOVERED_ERROR, 0x11, 0x00},	// Recovered ECC error	  Medium error, recovered
+		{0x80,		ABORTED_COMMAND, 0x47, 0x00},
+		// Busy, fake parity for now
+		{0x40,		ILLEGAL_REQUEST, 0x21, 0x04},
+		// Device ready, unaligned write command
+		{0x20,		HARDWARE_ERROR,  0x44, 0x00},
+		// Device fault, internal target failure
+		{0x08,		ABORTED_COMMAND, 0x47, 0x00},
+		// Timed out in xfer, fake parity for now
+		{0x04,		RECOVERED_ERROR, 0x11, 0x00},
+		// Recovered ECC error	  Medium error, recovered
 		{0xFF, 0xFF, 0xFF, 0xFF}, // END mark
 	};
 
@@ -1757,7 +1792,9 @@ static void ata_scsi_qc_complete(struct ata_queued_cmd *qc)
 	    ((cdb[2] & 0x20) || need_sense)) {
 		ata_gen_passthru_sense(qc);
 	} else {
-		if (!need_sense) {
+		if (qc->flags & ATA_QCFLAG_SENSE_VALID) {
+			cmd->result = SAM_STAT_CHECK_CONDITION;
+		} else if (!need_sense) {
 			cmd->result = SAM_STAT_GOOD;
 		} else {
 			/* TODO: decide which descriptor format to use
@@ -4240,10 +4277,7 @@ int ata_sas_allocate_tag(struct ata_port *ap)
 	unsigned int i, tag;
 
 	for (i = 0, tag = ap->sas_last_tag + 1; i < max_queue; i++, tag++) {
-		if (ap->flags & ATA_FLAG_LOWTAG)
-			tag = 1;
-		else
-			tag = tag < max_queue ? tag : 0;
+		tag = tag < max_queue ? tag : 0;
 
 		/* the last tag is reserved for internal command. */
 		if (tag == ATA_TAG_INTERNAL)
diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c
index 2e86e3b85266..cdf6215a9a22 100644
--- a/drivers/ata/libata-sff.c
+++ b/drivers/ata/libata-sff.c
@@ -3220,11 +3220,11 @@ void ata_pci_bmdma_init(struct ata_host *host)
 	 * ->sff_irq_clear method.  Try to initialize bmdma_addr
 	 * regardless of dma masks.
 	 */
-	rc = pci_set_dma_mask(pdev, ATA_DMA_MASK);
+	rc = dma_set_mask(&pdev->dev, ATA_DMA_MASK);
 	if (rc)
 		ata_bmdma_nodma(host, "failed to set dma mask");
 	if (!rc) {
-		rc = pci_set_consistent_dma_mask(pdev, ATA_DMA_MASK);
+		rc = dma_set_coherent_mask(&pdev->dev, ATA_DMA_MASK);
 		if (rc)
 			ata_bmdma_nodma(host,
 					"failed to set consistent dma mask");
diff --git a/drivers/ata/libata-trace.c b/drivers/ata/libata-trace.c
new file mode 100644
index 000000000000..fd30b8c10cf5
--- /dev/null
+++ b/drivers/ata/libata-trace.c
@@ -0,0 +1,151 @@
+/*
+ * libata-trace.c - trace functions for libata
+ *
+ * Copyright 2015 Hannes Reinecke
+ * Copyright 2015 SUSE Linux GmbH
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2, or (at your option)
+ *  any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; see the file COPYING.  If not, write to
+ *  the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/kernel.h>
+#include <linux/trace_seq.h>
+#include <trace/events/libata.h>
+
+const char *
+libata_trace_parse_status(struct trace_seq *p, unsigned char status)
+{
+	const char *ret = trace_seq_buffer_ptr(p);
+
+	trace_seq_printf(p, "{ ");
+	if (status & ATA_BUSY)
+		trace_seq_printf(p, "BUSY ");
+	if (status & ATA_DRDY)
+		trace_seq_printf(p, "DRDY ");
+	if (status & ATA_DF)
+		trace_seq_printf(p, "DF ");
+	if (status & ATA_DSC)
+		trace_seq_printf(p, "DSC ");
+	if (status & ATA_DRQ)
+		trace_seq_printf(p, "DRQ ");
+	if (status & ATA_CORR)
+		trace_seq_printf(p, "CORR ");
+	if (status & ATA_SENSE)
+		trace_seq_printf(p, "SENSE ");
+	if (status & ATA_ERR)
+		trace_seq_printf(p, "ERR ");
+	trace_seq_putc(p, '}');
+	trace_seq_putc(p, 0);
+
+	return ret;
+}
+
+const char *
+libata_trace_parse_eh_action(struct trace_seq *p, unsigned int eh_action)
+{
+	const char *ret = trace_seq_buffer_ptr(p);
+
+	trace_seq_printf(p, "%x", eh_action);
+	if (eh_action) {
+		trace_seq_printf(p, "{ ");
+		if (eh_action & ATA_EH_REVALIDATE)
+			trace_seq_printf(p, "REVALIDATE ");
+		if (eh_action & (ATA_EH_SOFTRESET | ATA_EH_HARDRESET))
+			trace_seq_printf(p, "RESET ");
+		else if (eh_action & ATA_EH_SOFTRESET)
+			trace_seq_printf(p, "SOFTRESET ");
+		else if (eh_action & ATA_EH_HARDRESET)
+			trace_seq_printf(p, "HARDRESET ");
+		if (eh_action & ATA_EH_ENABLE_LINK)
+			trace_seq_printf(p, "ENABLE_LINK ");
+		if (eh_action & ATA_EH_PARK)
+			trace_seq_printf(p, "PARK ");
+		trace_seq_putc(p, '}');
+	}
+	trace_seq_putc(p, 0);
+
+	return ret;
+}
+
+const char *
+libata_trace_parse_eh_err_mask(struct trace_seq *p, unsigned int eh_err_mask)
+{
+	const char *ret = trace_seq_buffer_ptr(p);
+
+	trace_seq_printf(p, "%x", eh_err_mask);
+	if (eh_err_mask) {
+		trace_seq_printf(p, "{ ");
+		if (eh_err_mask & AC_ERR_DEV)
+			trace_seq_printf(p, "DEV ");
+		if (eh_err_mask & AC_ERR_HSM)
+			trace_seq_printf(p, "HSM ");
+		if (eh_err_mask & AC_ERR_TIMEOUT)
+			trace_seq_printf(p, "TIMEOUT ");
+		if (eh_err_mask & AC_ERR_MEDIA)
+			trace_seq_printf(p, "MEDIA ");
+		if (eh_err_mask & AC_ERR_ATA_BUS)
+			trace_seq_printf(p, "ATA_BUS ");
+		if (eh_err_mask & AC_ERR_HOST_BUS)
+			trace_seq_printf(p, "HOST_BUS ");
+		if (eh_err_mask & AC_ERR_SYSTEM)
+			trace_seq_printf(p, "SYSTEM ");
+		if (eh_err_mask & AC_ERR_INVALID)
+			trace_seq_printf(p, "INVALID ");
+		if (eh_err_mask & AC_ERR_OTHER)
+			trace_seq_printf(p, "OTHER ");
+		if (eh_err_mask & AC_ERR_NODEV_HINT)
+			trace_seq_printf(p, "NODEV_HINT ");
+		if (eh_err_mask & AC_ERR_NCQ)
+			trace_seq_printf(p, "NCQ ");
+		trace_seq_putc(p, '}');
+	}
+	trace_seq_putc(p, 0);
+
+	return ret;
+}
+
+const char *
+libata_trace_parse_qc_flags(struct trace_seq *p, unsigned int qc_flags)
+{
+	const char *ret = trace_seq_buffer_ptr(p);
+
+	trace_seq_printf(p, "%x", qc_flags);
+	if (qc_flags) {
+		trace_seq_printf(p, "{ ");
+		if (qc_flags & ATA_QCFLAG_ACTIVE)
+			trace_seq_printf(p, "ACTIVE ");
+		if (qc_flags & ATA_QCFLAG_DMAMAP)
+			trace_seq_printf(p, "DMAMAP ");
+		if (qc_flags & ATA_QCFLAG_IO)
+			trace_seq_printf(p, "IO ");
+		if (qc_flags & ATA_QCFLAG_RESULT_TF)
+			trace_seq_printf(p, "RESULT_TF ");
+		if (qc_flags & ATA_QCFLAG_CLEAR_EXCL)
+			trace_seq_printf(p, "CLEAR_EXCL ");
+		if (qc_flags & ATA_QCFLAG_QUIET)
+			trace_seq_printf(p, "QUIET ");
+		if (qc_flags & ATA_QCFLAG_RETRY)
+			trace_seq_printf(p, "RETRY ");
+		if (qc_flags & ATA_QCFLAG_FAILED)
+			trace_seq_printf(p, "FAILED ");
+		if (qc_flags & ATA_QCFLAG_SENSE_VALID)
+			trace_seq_printf(p, "SENSE_VALID ");
+		if (qc_flags & ATA_QCFLAG_EH_SCHEDULED)
+			trace_seq_printf(p, "EH_SCHEDULED ");
+		trace_seq_putc(p, '}');
+	}
+	trace_seq_putc(p, 0);
+
+	return ret;
+}
diff --git a/drivers/ata/libata.h b/drivers/ata/libata.h
index f840ca18a7c0..a998a175f9f1 100644
--- a/drivers/ata/libata.h
+++ b/drivers/ata/libata.h
@@ -67,7 +67,8 @@ extern struct ata_queued_cmd *ata_qc_new_init(struct ata_device *dev, int tag);
 extern int ata_build_rw_tf(struct ata_taskfile *tf, struct ata_device *dev,
 			   u64 block, u32 n_block, unsigned int tf_flags,
 			   unsigned int tag);
-extern u64 ata_tf_read_block(struct ata_taskfile *tf, struct ata_device *dev);
+extern u64 ata_tf_read_block(const struct ata_taskfile *tf,
+			     struct ata_device *dev);
 extern unsigned ata_exec_internal(struct ata_device *dev,
 				  struct ata_taskfile *tf, const u8 *cdb,
 				  int dma_dir, void *buf, unsigned int buflen,
@@ -137,6 +138,9 @@ extern int ata_scsi_add_hosts(struct ata_host *host,
 			      struct scsi_host_template *sht);
 extern void ata_scsi_scan_host(struct ata_port *ap, int sync);
 extern int ata_scsi_offline_dev(struct ata_device *dev);
+extern void ata_scsi_set_sense(struct scsi_cmnd *cmd, u8 sk, u8 asc, u8 ascq);
+extern void ata_scsi_set_sense_information(struct scsi_cmnd *cmd,
+					   const struct ata_taskfile *tf);
 extern void ata_scsi_media_change_notify(struct ata_device *dev);
 extern void ata_scsi_hotplug(struct work_struct *work);
 extern void ata_schedule_scsi_eh(struct Scsi_Host *shost);
diff --git a/drivers/ata/pata_atp867x.c b/drivers/ata/pata_atp867x.c
index a705cfca90f7..3ea50dc5ea47 100644
--- a/drivers/ata/pata_atp867x.c
+++ b/drivers/ata/pata_atp867x.c
@@ -475,11 +475,11 @@ static int atp867x_ata_pci_sff_init_host(struct ata_host *host)
 
 	atp867x_fixup(host);
 
-	rc = pci_set_dma_mask(pdev, ATA_DMA_MASK);
+	rc = dma_set_mask(&pdev->dev, ATA_DMA_MASK);
 	if (rc)
 		return rc;
 
-	rc = pci_set_consistent_dma_mask(pdev, ATA_DMA_MASK);
+	rc = dma_set_coherent_mask(&pdev->dev, ATA_DMA_MASK);
 	return rc;
 }
 
diff --git a/drivers/ata/pata_cs5520.c b/drivers/ata/pata_cs5520.c
index d65cb9d2fa8c..4cb24070cc2d 100644
--- a/drivers/ata/pata_cs5520.c
+++ b/drivers/ata/pata_cs5520.c
@@ -164,11 +164,11 @@ static int cs5520_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
 		return -ENODEV;
 	}
 
-	if (pci_set_dma_mask(pdev, DMA_BIT_MASK(32))) {
+	if (dma_set_mask(&pdev->dev, DMA_BIT_MASK(32))) {
 		printk(KERN_ERR DRV_NAME ": unable to configure DMA mask.\n");
 		return -ENODEV;
 	}
-	if (pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32))) {
+	if (dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32))) {
 		printk(KERN_ERR DRV_NAME ": unable to configure consistent DMA mask.\n");
 		return -ENODEV;
 	}
diff --git a/drivers/ata/pata_hpt3x3.c b/drivers/ata/pata_hpt3x3.c
index d019cdd5bc9f..b2fc023783b1 100644
--- a/drivers/ata/pata_hpt3x3.c
+++ b/drivers/ata/pata_hpt3x3.c
@@ -221,10 +221,10 @@ static int hpt3x3_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
 	if (rc)
 		return rc;
 	host->iomap = pcim_iomap_table(pdev);
-	rc = pci_set_dma_mask(pdev, ATA_DMA_MASK);
+	rc = dma_set_mask(&pdev->dev, ATA_DMA_MASK);
 	if (rc)
 		return rc;
-	rc = pci_set_consistent_dma_mask(pdev, ATA_DMA_MASK);
+	rc = dma_set_coherent_mask(&pdev->dev, ATA_DMA_MASK);
 	if (rc)
 		return rc;
 
diff --git a/drivers/ata/pata_ninja32.c b/drivers/ata/pata_ninja32.c
index efb272da8567..633aa2934a18 100644
--- a/drivers/ata/pata_ninja32.c
+++ b/drivers/ata/pata_ninja32.c
@@ -122,10 +122,10 @@ static int ninja32_init_one(struct pci_dev *dev, const struct pci_device_id *id)
 		return rc;
 
 	host->iomap = pcim_iomap_table(dev);
-	rc = pci_set_dma_mask(dev, ATA_DMA_MASK);
+	rc = dma_set_mask(&dev->dev, ATA_DMA_MASK);
 	if (rc)
 		return rc;
-	rc = pci_set_consistent_dma_mask(dev, ATA_DMA_MASK);
+	rc = dma_set_coherent_mask(&dev->dev, ATA_DMA_MASK);
 	if (rc)
 		return rc;
 	pci_set_master(dev);
diff --git a/drivers/ata/pata_pdc2027x.c b/drivers/ata/pata_pdc2027x.c
index dca8251b1aea..d9ef9e276225 100644
--- a/drivers/ata/pata_pdc2027x.c
+++ b/drivers/ata/pata_pdc2027x.c
@@ -730,11 +730,11 @@ static int pdc2027x_init_one(struct pci_dev *pdev,
 		return rc;
 	host->iomap = pcim_iomap_table(pdev);
 
-	rc = pci_set_dma_mask(pdev, ATA_DMA_MASK);
+	rc = dma_set_mask(&pdev->dev, ATA_DMA_MASK);
 	if (rc)
 		return rc;
 
-	rc = pci_set_consistent_dma_mask(pdev, ATA_DMA_MASK);
+	rc = dma_set_coherent_mask(&pdev->dev, ATA_DMA_MASK);
 	if (rc)
 		return rc;
 
diff --git a/drivers/ata/pata_scc.c b/drivers/ata/pata_scc.c
index 7f4cb76ed9fa..5cd60d6388ec 100644
--- a/drivers/ata/pata_scc.c
+++ b/drivers/ata/pata_scc.c
@@ -1029,10 +1029,10 @@ static int scc_host_init(struct ata_host *host)
 	if (rc)
 		return rc;
 
-	rc = pci_set_dma_mask(pdev, ATA_DMA_MASK);
+	rc = dma_set_mask(&pdev->dev, ATA_DMA_MASK);
 	if (rc)
 		return rc;
-	rc = pci_set_consistent_dma_mask(pdev, ATA_DMA_MASK);
+	rc = dma_set_coherent_mask(&pdev->dev, ATA_DMA_MASK);
 	if (rc)
 		return rc;
 
diff --git a/drivers/ata/pata_sil680.c b/drivers/ata/pata_sil680.c
index f597edccedec..c14071be4f55 100644
--- a/drivers/ata/pata_sil680.c
+++ b/drivers/ata/pata_sil680.c
@@ -374,10 +374,10 @@ static int sil680_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
 	host->iomap = pcim_iomap_table(pdev);
 
 	/* Setup DMA masks */
-	rc = pci_set_dma_mask(pdev, ATA_DMA_MASK);
+	rc = dma_set_mask(&pdev->dev, ATA_DMA_MASK);
 	if (rc)
 		return rc;
-	rc = pci_set_consistent_dma_mask(pdev, ATA_DMA_MASK);
+	rc = dma_set_coherent_mask(&pdev->dev, ATA_DMA_MASK);
 	if (rc)
 		return rc;
 	pci_set_master(pdev);
diff --git a/drivers/ata/pdc_adma.c b/drivers/ata/pdc_adma.c
index f10631beffa8..64d682c6ee57 100644
--- a/drivers/ata/pdc_adma.c
+++ b/drivers/ata/pdc_adma.c
@@ -593,12 +593,12 @@ static int adma_set_dma_masks(struct pci_dev *pdev, void __iomem *mmio_base)
 {
 	int rc;
 
-	rc = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
+	rc = dma_set_mask(&pdev->dev, DMA_BIT_MASK(32));
 	if (rc) {
 		dev_err(&pdev->dev, "32-bit DMA enable failed\n");
 		return rc;
 	}
-	rc = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32));
+	rc = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32));
 	if (rc) {
 		dev_err(&pdev->dev, "32-bit consistent DMA enable failed\n");
 		return rc;
diff --git a/drivers/ata/sata_dwc_460ex.c b/drivers/ata/sata_dwc_460ex.c
index fdb0f2879ea7..902034991517 100644
--- a/drivers/ata/sata_dwc_460ex.c
+++ b/drivers/ata/sata_dwc_460ex.c
@@ -36,11 +36,16 @@
 #include <linux/platform_device.h>
 #include <linux/libata.h>
 #include <linux/slab.h>
+
 #include "libata.h"
 
 #include <scsi/scsi_host.h>
 #include <scsi/scsi_cmnd.h>
 
+/* Supported DMA engine drivers */
+#include <linux/platform_data/dma-dw.h>
+#include <linux/dma/dw.h>
+
 /* These two are defined in "libata.h" */
 #undef	DRV_NAME
 #undef	DRV_VERSION
@@ -60,153 +65,9 @@
 #define NO_IRQ		0
 #endif
 
-/* SATA DMA driver Globals */
-#define DMA_NUM_CHANS		1
-#define DMA_NUM_CHAN_REGS	8
-
-/* SATA DMA Register definitions */
 #define AHB_DMA_BRST_DFLT	64	/* 16 data items burst length*/
 
-struct dmareg {
-	u32 low;		/* Low bits 0-31 */
-	u32 high;		/* High bits 32-63 */
-};
-
-/* DMA Per Channel registers */
-struct dma_chan_regs {
-	struct dmareg sar;	/* Source Address */
-	struct dmareg dar;	/* Destination address */
-	struct dmareg llp;	/* Linked List Pointer */
-	struct dmareg ctl;	/* Control */
-	struct dmareg sstat;	/* Source Status not implemented in core */
-	struct dmareg dstat;	/* Destination Status not implemented in core*/
-	struct dmareg sstatar;	/* Source Status Address not impl in core */
-	struct dmareg dstatar;	/* Destination Status Address not implemente */
-	struct dmareg cfg;	/* Config */
-	struct dmareg sgr;	/* Source Gather */
-	struct dmareg dsr;	/* Destination Scatter */
-};
-
-/* Generic Interrupt Registers */
-struct dma_interrupt_regs {
-	struct dmareg tfr;	/* Transfer Interrupt */
-	struct dmareg block;	/* Block Interrupt */
-	struct dmareg srctran;	/* Source Transfer Interrupt */
-	struct dmareg dsttran;	/* Dest Transfer Interrupt */
-	struct dmareg error;	/* Error */
-};
-
-struct ahb_dma_regs {
-	struct dma_chan_regs	chan_regs[DMA_NUM_CHAN_REGS];
-	struct dma_interrupt_regs interrupt_raw;	/* Raw Interrupt */
-	struct dma_interrupt_regs interrupt_status;	/* Interrupt Status */
-	struct dma_interrupt_regs interrupt_mask;	/* Interrupt Mask */
-	struct dma_interrupt_regs interrupt_clear;	/* Interrupt Clear */
-	struct dmareg		statusInt;	/* Interrupt combined*/
-	struct dmareg		rq_srcreg;	/* Src Trans Req */
-	struct dmareg		rq_dstreg;	/* Dst Trans Req */
-	struct dmareg		rq_sgl_srcreg;	/* Sngl Src Trans Req*/
-	struct dmareg		rq_sgl_dstreg;	/* Sngl Dst Trans Req*/
-	struct dmareg		rq_lst_srcreg;	/* Last Src Trans Req*/
-	struct dmareg		rq_lst_dstreg;	/* Last Dst Trans Req*/
-	struct dmareg		dma_cfg;		/* DMA Config */
-	struct dmareg		dma_chan_en;		/* DMA Channel Enable*/
-	struct dmareg		dma_id;			/* DMA ID */
-	struct dmareg		dma_test;		/* DMA Test */
-	struct dmareg		res1;			/* reserved */
-	struct dmareg		res2;			/* reserved */
-	/*
-	 * DMA Comp Params
-	 * Param 6 = dma_param[0], Param 5 = dma_param[1],
-	 * Param 4 = dma_param[2] ...
-	 */
-	struct dmareg		dma_params[6];
-};
-
-/* Data structure for linked list item */
-struct lli {
-	u32		sar;		/* Source Address */
-	u32		dar;		/* Destination address */
-	u32		llp;		/* Linked List Pointer */
-	struct dmareg	ctl;		/* Control */
-	struct dmareg	dstat;		/* Destination Status */
-};
-
-enum {
-	SATA_DWC_DMAC_LLI_SZ =	(sizeof(struct lli)),
-	SATA_DWC_DMAC_LLI_NUM =	256,
-	SATA_DWC_DMAC_LLI_TBL_SZ = (SATA_DWC_DMAC_LLI_SZ * \
-					SATA_DWC_DMAC_LLI_NUM),
-	SATA_DWC_DMAC_TWIDTH_BYTES = 4,
-	SATA_DWC_DMAC_CTRL_TSIZE_MAX = (0x00000800 * \
-						SATA_DWC_DMAC_TWIDTH_BYTES),
-};
-
-/* DMA Register Operation Bits */
-enum {
-	DMA_EN	=		0x00000001, /* Enable AHB DMA */
-	DMA_CTL_LLP_SRCEN =	0x10000000, /* Blk chain enable Src */
-	DMA_CTL_LLP_DSTEN =	0x08000000, /* Blk chain enable Dst */
-};
-
-#define	DMA_CTL_BLK_TS(size)	((size) & 0x000000FFF)	/* Blk Transfer size */
-#define DMA_CHANNEL(ch)		(0x00000001 << (ch))	/* Select channel */
-	/* Enable channel */
-#define	DMA_ENABLE_CHAN(ch)	((0x00000001 << (ch)) |			\
-				 ((0x000000001 << (ch)) << 8))
-	/* Disable channel */
-#define	DMA_DISABLE_CHAN(ch)	(0x00000000 | ((0x000000001 << (ch)) << 8))
-	/* Transfer Type & Flow Controller */
-#define	DMA_CTL_TTFC(type)	(((type) & 0x7) << 20)
-#define	DMA_CTL_SMS(num)	(((num) & 0x3) << 25) /* Src Master Select */
-#define	DMA_CTL_DMS(num)	(((num) & 0x3) << 23)/* Dst Master Select */
-	/* Src Burst Transaction Length */
-#define DMA_CTL_SRC_MSIZE(size) (((size) & 0x7) << 14)
-	/* Dst Burst Transaction Length */
-#define	DMA_CTL_DST_MSIZE(size) (((size) & 0x7) << 11)
-	/* Source Transfer Width */
-#define	DMA_CTL_SRC_TRWID(size) (((size) & 0x7) << 4)
-	/* Destination Transfer Width */
-#define	DMA_CTL_DST_TRWID(size) (((size) & 0x7) << 1)
-
-/* Assign HW handshaking interface (x) to destination / source peripheral */
-#define	DMA_CFG_HW_HS_DEST(int_num) (((int_num) & 0xF) << 11)
-#define	DMA_CFG_HW_HS_SRC(int_num) (((int_num) & 0xF) << 7)
-#define	DMA_CFG_HW_CH_PRIOR(int_num) (((int_num) & 0xF) << 5)
-#define	DMA_LLP_LMS(addr, master) (((addr) & 0xfffffffc) | (master))
-
-/*
- * This define is used to set block chaining disabled in the control low
- * register.  It is already in little endian format so it can be &'d dirctly.
- * It is essentially: cpu_to_le32(~(DMA_CTL_LLP_SRCEN | DMA_CTL_LLP_DSTEN))
- */
 enum {
-	DMA_CTL_LLP_DISABLE_LE32 = 0xffffffe7,
-	DMA_CTL_TTFC_P2M_DMAC =	0x00000002, /* Per to mem, DMAC cntr */
-	DMA_CTL_TTFC_M2P_PER =	0x00000003, /* Mem to per, peripheral cntr */
-	DMA_CTL_SINC_INC =	0x00000000, /* Source Address Increment */
-	DMA_CTL_SINC_DEC =	0x00000200,
-	DMA_CTL_SINC_NOCHANGE =	0x00000400,
-	DMA_CTL_DINC_INC =	0x00000000, /* Destination Address Increment */
-	DMA_CTL_DINC_DEC =	0x00000080,
-	DMA_CTL_DINC_NOCHANGE =	0x00000100,
-	DMA_CTL_INT_EN =	0x00000001, /* Interrupt Enable */
-
-/* Channel Configuration Register high bits */
-	DMA_CFG_FCMOD_REQ =	0x00000001, /* Flow Control - request based */
-	DMA_CFG_PROTCTL	=	(0x00000003 << 2),/* Protection Control */
-
-/* Channel Configuration Register low bits */
-	DMA_CFG_RELD_DST =	0x80000000, /* Reload Dest / Src Addr */
-	DMA_CFG_RELD_SRC =	0x40000000,
-	DMA_CFG_HS_SELSRC =	0x00000800, /* Software handshake Src/ Dest */
-	DMA_CFG_HS_SELDST =	0x00000400,
-	DMA_CFG_FIFOEMPTY =     (0x00000001 << 9), /* FIFO Empty bit */
-
-/* Channel Linked List Pointer Register */
-	DMA_LLP_AHBMASTER1 =	0,	/* List Master Select */
-	DMA_LLP_AHBMASTER2 =	1,
-
 	SATA_DWC_MAX_PORTS = 1,
 
 	SATA_DWC_SCR_OFFSET = 0x24,
@@ -287,7 +148,7 @@ struct sata_dwc_device {
 	struct ata_host		*host;
 	u8 __iomem		*reg_base;
 	struct sata_dwc_regs	*sata_dwc_regs;	/* DW Synopsys SATA specific */
-	int			irq_dma;
+	struct dw_dma_chip	*dma;
 };
 
 #define SATA_DWC_QCMD_MAX	32
@@ -295,10 +156,13 @@ struct sata_dwc_device {
 struct sata_dwc_device_port {
 	struct sata_dwc_device	*hsdev;
 	int			cmd_issued[SATA_DWC_QCMD_MAX];
-	struct lli		*llit[SATA_DWC_QCMD_MAX];  /* DMA LLI table */
-	dma_addr_t		llit_dma[SATA_DWC_QCMD_MAX];
-	u32			dma_chan[SATA_DWC_QCMD_MAX];
 	int			dma_pending[SATA_DWC_QCMD_MAX];
+
+	/* DMA info */
+	struct dw_dma_slave		*dws;
+	struct dma_chan			*chan;
+	struct dma_async_tx_descriptor	*desc[SATA_DWC_QCMD_MAX];
+	u32				dma_interrupt_count;
 };
 
 /*
@@ -330,14 +194,17 @@ struct sata_dwc_host_priv {
 	void	__iomem	 *scr_addr_sstatus;
 	u32	sata_dwc_sactive_issued ;
 	u32	sata_dwc_sactive_queued ;
-	u32	dma_interrupt_count;
-	struct	ahb_dma_regs	*sata_dma_regs;
-	struct	device	*dwc_dev;
-	int	dma_channel;
 };
 
 static struct sata_dwc_host_priv host_pvt;
 
+static struct dw_dma_slave sata_dwc_dma_dws = {
+	.src_id = 0,
+	.dst_id = 0,
+	.src_master = 0,
+	.dst_master = 1,
+};
+
 /*
  * Prototypes
  */
@@ -347,12 +214,6 @@ static int sata_dwc_qc_complete(struct ata_port *ap, struct ata_queued_cmd *qc,
 static void sata_dwc_dma_xfer_complete(struct ata_port *ap, u32 check_status);
 static void sata_dwc_port_stop(struct ata_port *ap);
 static void sata_dwc_clear_dmacr(struct sata_dwc_device_port *hsdevp, u8 tag);
-static int dma_dwc_init(struct sata_dwc_device *hsdev, int irq);
-static void dma_dwc_exit(struct sata_dwc_device *hsdev);
-static int dma_dwc_xfer_setup(struct scatterlist *sg, int num_elems,
-			      struct lli *lli, dma_addr_t dma_lli,
-			      void __iomem *addr, int dir);
-static void dma_dwc_xfer_start(int dma_ch);
 
 static const char *get_prot_descript(u8 protocol)
 {
@@ -390,90 +251,23 @@ static const char *get_dma_dir_descript(int dma_dir)
 	}
 }
 
-static void sata_dwc_tf_dump(struct ata_taskfile *tf)
+static void sata_dwc_tf_dump(struct ata_port *ap, struct ata_taskfile *tf)
 {
-	dev_vdbg(host_pvt.dwc_dev, "taskfile cmd: 0x%02x protocol: %s flags:"
-		"0x%lx device: %x\n", tf->command,
-		get_prot_descript(tf->protocol), tf->flags, tf->device);
-	dev_vdbg(host_pvt.dwc_dev, "feature: 0x%02x nsect: 0x%x lbal: 0x%x "
-		"lbam: 0x%x lbah: 0x%x\n", tf->feature, tf->nsect, tf->lbal,
-		 tf->lbam, tf->lbah);
-	dev_vdbg(host_pvt.dwc_dev, "hob_feature: 0x%02x hob_nsect: 0x%x "
-		"hob_lbal: 0x%x hob_lbam: 0x%x hob_lbah: 0x%x\n",
+	dev_vdbg(ap->dev,
+		"taskfile cmd: 0x%02x protocol: %s flags: 0x%lx device: %x\n",
+		tf->command, get_prot_descript(tf->protocol), tf->flags,
+		tf->device);
+	dev_vdbg(ap->dev,
+		"feature: 0x%02x nsect: 0x%x lbal: 0x%x lbam: 0x%x lbah: 0x%x\n",
+		tf->feature, tf->nsect, tf->lbal, tf->lbam, tf->lbah);
+	dev_vdbg(ap->dev,
+		"hob_feature: 0x%02x hob_nsect: 0x%x hob_lbal: 0x%x hob_lbam: 0x%x hob_lbah: 0x%x\n",
 		tf->hob_feature, tf->hob_nsect, tf->hob_lbal, tf->hob_lbam,
 		tf->hob_lbah);
 }
 
-/*
- * Function: get_burst_length_encode
- * arguments: datalength: length in bytes of data
- * returns value to be programmed in register corresponding to data length
- * This value is effectively the log(base 2) of the length
- */
-static  int get_burst_length_encode(int datalength)
-{
-	int items = datalength >> 2;	/* div by 4 to get lword count */
-
-	if (items >= 64)
-		return 5;
-
-	if (items >= 32)
-		return 4;
-
-	if (items >= 16)
-		return 3;
-
-	if (items >= 8)
-		return 2;
-
-	if (items >= 4)
-		return 1;
-
-	return 0;
-}
-
-static  void clear_chan_interrupts(int c)
+static void dma_dwc_xfer_done(void *hsdev_instance)
 {
-	out_le32(&(host_pvt.sata_dma_regs->interrupt_clear.tfr.low),
-		 DMA_CHANNEL(c));
-	out_le32(&(host_pvt.sata_dma_regs->interrupt_clear.block.low),
-		 DMA_CHANNEL(c));
-	out_le32(&(host_pvt.sata_dma_regs->interrupt_clear.srctran.low),
-		 DMA_CHANNEL(c));
-	out_le32(&(host_pvt.sata_dma_regs->interrupt_clear.dsttran.low),
-		 DMA_CHANNEL(c));
-	out_le32(&(host_pvt.sata_dma_regs->interrupt_clear.error.low),
-		 DMA_CHANNEL(c));
-}
-
-/*
- * Function: dma_request_channel
- * arguments: None
- * returns channel number if available else -1
- * This function assigns the next available DMA channel from the list to the
- * requester
- */
-static int dma_request_channel(void)
-{
-	/* Check if the channel is not currently in use */
-	if (!(in_le32(&(host_pvt.sata_dma_regs->dma_chan_en.low)) &
-		DMA_CHANNEL(host_pvt.dma_channel)))
-		return host_pvt.dma_channel;
-	dev_err(host_pvt.dwc_dev, "%s Channel %d is currently in use\n",
-		__func__, host_pvt.dma_channel);
-	return -1;
-}
-
-/*
- * Function: dma_dwc_interrupt
- * arguments: irq, dev_id, pt_regs
- * returns channel number if available else -1
- * Interrupt Handler for DW AHB SATA DMA
- */
-static irqreturn_t dma_dwc_interrupt(int irq, void *hsdev_instance)
-{
-	int chan;
-	u32 tfr_reg, err_reg;
 	unsigned long flags;
 	struct sata_dwc_device *hsdev = hsdev_instance;
 	struct ata_host *host = (struct ata_host *)hsdev->host;
@@ -487,341 +281,65 @@ static irqreturn_t dma_dwc_interrupt(int irq, void *hsdev_instance)
 	hsdevp = HSDEVP_FROM_AP(ap);
 	tag = ap->link.active_tag;
 
-	tfr_reg = in_le32(&(host_pvt.sata_dma_regs->interrupt_status.tfr\
-			.low));
-	err_reg = in_le32(&(host_pvt.sata_dma_regs->interrupt_status.error\
-			.low));
-
-	dev_dbg(ap->dev, "eot=0x%08x err=0x%08x pending=%d active port=%d\n",
-		tfr_reg, err_reg, hsdevp->dma_pending[tag], port);
-
-	chan = host_pvt.dma_channel;
-	if (chan >= 0) {
-		/* Check for end-of-transfer interrupt. */
-		if (tfr_reg & DMA_CHANNEL(chan)) {
-			/*
-			 * Each DMA command produces 2 interrupts.  Only
-			 * complete the command after both interrupts have been
-			 * seen. (See sata_dwc_isr())
-			 */
-			host_pvt.dma_interrupt_count++;
-			sata_dwc_clear_dmacr(hsdevp, tag);
-
-			if (hsdevp->dma_pending[tag] ==
-			    SATA_DWC_DMA_PENDING_NONE) {
-				dev_err(ap->dev, "DMA not pending eot=0x%08x "
-					"err=0x%08x tag=0x%02x pending=%d\n",
-					tfr_reg, err_reg, tag,
-					hsdevp->dma_pending[tag]);
-			}
-
-			if ((host_pvt.dma_interrupt_count % 2) == 0)
-				sata_dwc_dma_xfer_complete(ap, 1);
-
-			/* Clear the interrupt */
-			out_le32(&(host_pvt.sata_dma_regs->interrupt_clear\
-				.tfr.low),
-				 DMA_CHANNEL(chan));
-		}
-
-		/* Check for error interrupt. */
-		if (err_reg & DMA_CHANNEL(chan)) {
-			/* TODO Need error handler ! */
-			dev_err(ap->dev, "error interrupt err_reg=0x%08x\n",
-				err_reg);
-
-			/* Clear the interrupt. */
-			out_le32(&(host_pvt.sata_dma_regs->interrupt_clear\
-				.error.low),
-				 DMA_CHANNEL(chan));
-		}
-	}
-	spin_unlock_irqrestore(&host->lock, flags);
-	return IRQ_HANDLED;
-}
-
-/*
- * Function: dma_request_interrupts
- * arguments: hsdev
- * returns status
- * This function registers ISR for a particular DMA channel interrupt
- */
-static int dma_request_interrupts(struct sata_dwc_device *hsdev, int irq)
-{
-	int retval = 0;
-	int chan = host_pvt.dma_channel;
-
-	if (chan >= 0) {
-		/* Unmask error interrupt */
-		out_le32(&(host_pvt.sata_dma_regs)->interrupt_mask.error.low,
-			 DMA_ENABLE_CHAN(chan));
-
-		/* Unmask end-of-transfer interrupt */
-		out_le32(&(host_pvt.sata_dma_regs)->interrupt_mask.tfr.low,
-			 DMA_ENABLE_CHAN(chan));
-	}
-
-	retval = request_irq(irq, dma_dwc_interrupt, 0, "SATA DMA", hsdev);
-	if (retval) {
-		dev_err(host_pvt.dwc_dev, "%s: could not get IRQ %d\n",
-		__func__, irq);
-		return -ENODEV;
-	}
-
-	/* Mark this interrupt as requested */
-	hsdev->irq_dma = irq;
-	return 0;
-}
-
-/*
- * Function: map_sg_to_lli
- * The Synopsis driver has a comment proposing that better performance
- * is possible by only enabling interrupts on the last item in the linked list.
- * However, it seems that could be a problem if an error happened on one of the
- * first items.  The transfer would halt, but no error interrupt would occur.
- * Currently this function sets interrupts enabled for each linked list item:
- * DMA_CTL_INT_EN.
- */
-static int map_sg_to_lli(struct scatterlist *sg, int num_elems,
-			struct lli *lli, dma_addr_t dma_lli,
-			void __iomem *dmadr_addr, int dir)
-{
-	int i, idx = 0;
-	int fis_len = 0;
-	dma_addr_t next_llp;
-	int bl;
-	int sms_val, dms_val;
-
-	sms_val = 0;
-	dms_val = 1 + host_pvt.dma_channel;
-	dev_dbg(host_pvt.dwc_dev,
-		"%s: sg=%p nelem=%d lli=%p dma_lli=0x%pad dmadr=0x%p\n",
-		__func__, sg, num_elems, lli, &dma_lli, dmadr_addr);
-
-	bl = get_burst_length_encode(AHB_DMA_BRST_DFLT);
-
-	for (i = 0; i < num_elems; i++, sg++) {
-		u32 addr, offset;
-		u32 sg_len, len;
-
-		addr = (u32) sg_dma_address(sg);
-		sg_len = sg_dma_len(sg);
-
-		dev_dbg(host_pvt.dwc_dev, "%s: elem=%d sg_addr=0x%x sg_len"
-			"=%d\n", __func__, i, addr, sg_len);
-
-		while (sg_len) {
-			if (idx >= SATA_DWC_DMAC_LLI_NUM) {
-				/* The LLI table is not large enough. */
-				dev_err(host_pvt.dwc_dev, "LLI table overrun "
-				"(idx=%d)\n", idx);
-				break;
-			}
-			len = (sg_len > SATA_DWC_DMAC_CTRL_TSIZE_MAX) ?
-				SATA_DWC_DMAC_CTRL_TSIZE_MAX : sg_len;
-
-			offset = addr & 0xffff;
-			if ((offset + sg_len) > 0x10000)
-				len = 0x10000 - offset;
-
-			/*
-			 * Make sure a LLI block is not created that will span
-			 * 8K max FIS boundary.  If the block spans such a FIS
-			 * boundary, there is a chance that a DMA burst will
-			 * cross that boundary -- this results in an error in
-			 * the host controller.
-			 */
-			if (fis_len + len > 8192) {
-				dev_dbg(host_pvt.dwc_dev, "SPLITTING: fis_len="
-					"%d(0x%x) len=%d(0x%x)\n", fis_len,
-					 fis_len, len, len);
-				len = 8192 - fis_len;
-				fis_len = 0;
-			} else {
-				fis_len += len;
-			}
-			if (fis_len == 8192)
-				fis_len = 0;
-
-			/*
-			 * Set DMA addresses and lower half of control register
-			 * based on direction.
-			 */
-			if (dir == DMA_FROM_DEVICE) {
-				lli[idx].dar = cpu_to_le32(addr);
-				lli[idx].sar = cpu_to_le32((u32)dmadr_addr);
-
-				lli[idx].ctl.low = cpu_to_le32(
-					DMA_CTL_TTFC(DMA_CTL_TTFC_P2M_DMAC) |
-					DMA_CTL_SMS(sms_val) |
-					DMA_CTL_DMS(dms_val) |
-					DMA_CTL_SRC_MSIZE(bl) |
-					DMA_CTL_DST_MSIZE(bl) |
-					DMA_CTL_SINC_NOCHANGE |
-					DMA_CTL_SRC_TRWID(2) |
-					DMA_CTL_DST_TRWID(2) |
-					DMA_CTL_INT_EN |
-					DMA_CTL_LLP_SRCEN |
-					DMA_CTL_LLP_DSTEN);
-			} else {	/* DMA_TO_DEVICE */
-				lli[idx].sar = cpu_to_le32(addr);
-				lli[idx].dar = cpu_to_le32((u32)dmadr_addr);
-
-				lli[idx].ctl.low = cpu_to_le32(
-					DMA_CTL_TTFC(DMA_CTL_TTFC_M2P_PER) |
-					DMA_CTL_SMS(dms_val) |
-					DMA_CTL_DMS(sms_val) |
-					DMA_CTL_SRC_MSIZE(bl) |
-					DMA_CTL_DST_MSIZE(bl) |
-					DMA_CTL_DINC_NOCHANGE |
-					DMA_CTL_SRC_TRWID(2) |
-					DMA_CTL_DST_TRWID(2) |
-					DMA_CTL_INT_EN |
-					DMA_CTL_LLP_SRCEN |
-					DMA_CTL_LLP_DSTEN);
-			}
-
-			dev_dbg(host_pvt.dwc_dev, "%s setting ctl.high len: "
-				"0x%08x val: 0x%08x\n", __func__,
-				len, DMA_CTL_BLK_TS(len / 4));
-
-			/* Program the LLI CTL high register */
-			lli[idx].ctl.high = cpu_to_le32(DMA_CTL_BLK_TS\
-						(len / 4));
-
-			/* Program the next pointer.  The next pointer must be
-			 * the physical address, not the virtual address.
-			 */
-			next_llp = (dma_lli + ((idx + 1) * sizeof(struct \
-							lli)));
-
-			/* The last 2 bits encode the list master select. */
-			next_llp = DMA_LLP_LMS(next_llp, DMA_LLP_AHBMASTER2);
-
-			lli[idx].llp = cpu_to_le32(next_llp);
-			idx++;
-			sg_len -= len;
-			addr += len;
-		}
-	}
-
 	/*
-	 * The last next ptr has to be zero and the last control low register
-	 * has to have LLP_SRC_EN and LLP_DST_EN (linked list pointer source
-	 * and destination enable) set back to 0 (disabled.) This is what tells
-	 * the core that this is the last item in the linked list.
+	 * Each DMA command produces 2 interrupts.  Only
+	 * complete the command after both interrupts have been
+	 * seen. (See sata_dwc_isr())
 	 */
-	if (idx) {
-		lli[idx-1].llp = 0x00000000;
-		lli[idx-1].ctl.low &= DMA_CTL_LLP_DISABLE_LE32;
+	hsdevp->dma_interrupt_count++;
+	sata_dwc_clear_dmacr(hsdevp, tag);
 
-		/* Flush cache to memory */
-		dma_cache_sync(NULL, lli, (sizeof(struct lli) * idx),
-			       DMA_BIDIRECTIONAL);
+	if (hsdevp->dma_pending[tag] == SATA_DWC_DMA_PENDING_NONE) {
+		dev_err(ap->dev, "DMA not pending tag=0x%02x pending=%d\n",
+			tag, hsdevp->dma_pending[tag]);
 	}
 
-	return idx;
-}
+	if ((hsdevp->dma_interrupt_count % 2) == 0)
+		sata_dwc_dma_xfer_complete(ap, 1);
 
-/*
- * Function: dma_dwc_xfer_start
- * arguments: Channel number
- * Return : None
- * Enables the DMA channel
- */
-static void dma_dwc_xfer_start(int dma_ch)
-{
-	/* Enable the DMA channel */
-	out_le32(&(host_pvt.sata_dma_regs->dma_chan_en.low),
-		 in_le32(&(host_pvt.sata_dma_regs->dma_chan_en.low)) |
-		 DMA_ENABLE_CHAN(dma_ch));
+	spin_unlock_irqrestore(&host->lock, flags);
 }
 
-static int dma_dwc_xfer_setup(struct scatterlist *sg, int num_elems,
-			      struct lli *lli, dma_addr_t dma_lli,
-			      void __iomem *addr, int dir)
+static struct dma_async_tx_descriptor *dma_dwc_xfer_setup(struct ata_queued_cmd *qc)
 {
-	int dma_ch;
-	int num_lli;
-	/* Acquire DMA channel */
-	dma_ch = dma_request_channel();
-	if (dma_ch == -1) {
-		dev_err(host_pvt.dwc_dev, "%s: dma channel unavailable\n",
-			 __func__);
-		return -EAGAIN;
+	struct ata_port *ap = qc->ap;
+	struct sata_dwc_device_port *hsdevp = HSDEVP_FROM_AP(ap);
+	struct sata_dwc_device *hsdev = HSDEV_FROM_AP(ap);
+	dma_addr_t addr = (dma_addr_t)&hsdev->sata_dwc_regs->dmadr;
+	struct dma_slave_config sconf;
+	struct dma_async_tx_descriptor *desc;
+
+	if (qc->dma_dir == DMA_DEV_TO_MEM) {
+		sconf.src_addr = addr;
+		sconf.device_fc = true;
+	} else {	/* DMA_MEM_TO_DEV */
+		sconf.dst_addr = addr;
+		sconf.device_fc = false;
 	}
 
-	/* Convert SG list to linked list of items (LLIs) for AHB DMA */
-	num_lli = map_sg_to_lli(sg, num_elems, lli, dma_lli, addr, dir);
-
-	dev_dbg(host_pvt.dwc_dev, "%s sg: 0x%p, count: %d lli: %p dma_lli:"
-		" 0x%0xlx addr: %p lli count: %d\n", __func__, sg, num_elems,
-		 lli, (u32)dma_lli, addr, num_lli);
-
-	clear_chan_interrupts(dma_ch);
+	sconf.direction = qc->dma_dir;
+	sconf.src_maxburst = AHB_DMA_BRST_DFLT;
+	sconf.dst_maxburst = AHB_DMA_BRST_DFLT;
+	sconf.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
+	sconf.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
 
-	/* Program the CFG register. */
-	out_le32(&(host_pvt.sata_dma_regs->chan_regs[dma_ch].cfg.high),
-		 DMA_CFG_HW_HS_SRC(dma_ch) | DMA_CFG_HW_HS_DEST(dma_ch) |
-		 DMA_CFG_PROTCTL | DMA_CFG_FCMOD_REQ);
-	out_le32(&(host_pvt.sata_dma_regs->chan_regs[dma_ch].cfg.low),
-		 DMA_CFG_HW_CH_PRIOR(dma_ch));
+	dmaengine_slave_config(hsdevp->chan, &sconf);
 
-	/* Program the address of the linked list */
-	out_le32(&(host_pvt.sata_dma_regs->chan_regs[dma_ch].llp.low),
-		 DMA_LLP_LMS(dma_lli, DMA_LLP_AHBMASTER2));
-
-	/* Program the CTL register with src enable / dst enable */
-	out_le32(&(host_pvt.sata_dma_regs->chan_regs[dma_ch].ctl.low),
-		 DMA_CTL_LLP_SRCEN | DMA_CTL_LLP_DSTEN);
-	return dma_ch;
-}
-
-/*
- * Function: dma_dwc_exit
- * arguments: None
- * returns status
- * This function exits the SATA DMA driver
- */
-static void dma_dwc_exit(struct sata_dwc_device *hsdev)
-{
-	dev_dbg(host_pvt.dwc_dev, "%s:\n", __func__);
-	if (host_pvt.sata_dma_regs) {
-		iounmap((void __iomem *)host_pvt.sata_dma_regs);
-		host_pvt.sata_dma_regs = NULL;
-	}
-
-	if (hsdev->irq_dma) {
-		free_irq(hsdev->irq_dma, hsdev);
-		hsdev->irq_dma = 0;
-	}
-}
-
-/*
- * Function: dma_dwc_init
- * arguments: hsdev
- * returns status
- * This function initializes the SATA DMA driver
- */
-static int dma_dwc_init(struct sata_dwc_device *hsdev, int irq)
-{
-	int err;
+	/* Convert SG list to linked list of items (LLIs) for AHB DMA */
+	desc = dmaengine_prep_slave_sg(hsdevp->chan, qc->sg, qc->n_elem,
+				       qc->dma_dir,
+				       DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
 
-	err = dma_request_interrupts(hsdev, irq);
-	if (err) {
-		dev_err(host_pvt.dwc_dev, "%s: dma_request_interrupts returns"
-			" %d\n", __func__, err);
-		return err;
-	}
+	if (!desc)
+		return NULL;
 
-	/* Enabe DMA */
-	out_le32(&(host_pvt.sata_dma_regs->dma_cfg.low), DMA_EN);
+	desc->callback = dma_dwc_xfer_done;
+	desc->callback_param = hsdev;
 
-	dev_notice(host_pvt.dwc_dev, "DMA initialized\n");
-	dev_dbg(host_pvt.dwc_dev, "SATA DMA registers=0x%p\n", host_pvt.\
-		sata_dma_regs);
+	dev_dbg(hsdev->dev, "%s sg: 0x%p, count: %d addr: %pad\n",
+		__func__, qc->sg, qc->n_elem, &addr);
 
-	return 0;
+	return desc;
 }
 
 static int sata_dwc_scr_read(struct ata_link *link, unsigned int scr, u32 *val)
@@ -891,21 +409,18 @@ static void sata_dwc_error_intr(struct ata_port *ap,
 	struct ata_queued_cmd *qc;
 	u32 serror;
 	u8 status, tag;
-	u32 err_reg;
 
 	ata_ehi_clear_desc(ehi);
 
 	serror = core_scr_read(SCR_ERROR);
 	status = ap->ops->sff_check_status(ap);
 
-	err_reg = in_le32(&(host_pvt.sata_dma_regs->interrupt_status.error.\
-			low));
 	tag = ap->link.active_tag;
 
-	dev_err(ap->dev, "%s SCR_ERROR=0x%08x intpr=0x%08x status=0x%08x "
-		"dma_intp=%d pending=%d issued=%d dma_err_status=0x%08x\n",
-		__func__, serror, intpr, status, host_pvt.dma_interrupt_count,
-		hsdevp->dma_pending[tag], hsdevp->cmd_issued[tag], err_reg);
+	dev_err(ap->dev,
+		"%s SCR_ERROR=0x%08x intpr=0x%08x status=0x%08x dma_intp=%d pending=%d issued=%d",
+		__func__, serror, intpr, status, hsdevp->dma_interrupt_count,
+		hsdevp->dma_pending[tag], hsdevp->cmd_issued[tag]);
 
 	/* Clear error register and interrupt bit */
 	clear_serror();
@@ -1003,8 +518,9 @@ static irqreturn_t sata_dwc_isr(int irq, void *dev_instance)
 
 		/* DEV interrupt w/ no active qc? */
 		if (unlikely(!qc || (qc->tf.flags & ATA_TFLAG_POLLING))) {
-			dev_err(ap->dev, "%s interrupt with no active qc "
-				"qc=%p\n", __func__, qc);
+			dev_err(ap->dev,
+				"%s interrupt with no active qc qc=%p\n",
+				__func__, qc);
 			ap->ops->sff_check_status(ap);
 			handled = 1;
 			goto DONE;
@@ -1031,16 +547,16 @@ DRVSTILLBUSY:
 			 * operation done interrupt. The command should be
 			 * completed only after both interrupts are seen.
 			 */
-			host_pvt.dma_interrupt_count++;
+			hsdevp->dma_interrupt_count++;
 			if (hsdevp->dma_pending[tag] == \
 					SATA_DWC_DMA_PENDING_NONE) {
-				dev_err(ap->dev, "%s: DMA not pending "
-					"intpr=0x%08x status=0x%08x pending"
-					"=%d\n", __func__, intpr, status,
+				dev_err(ap->dev,
+					"%s: DMA not pending intpr=0x%08x status=0x%08x pending=%d\n",
+					__func__, intpr, status,
 					hsdevp->dma_pending[tag]);
 			}
 
-			if ((host_pvt.dma_interrupt_count % 2) == 0)
+			if ((hsdevp->dma_interrupt_count % 2) == 0)
 				sata_dwc_dma_xfer_complete(ap, 1);
 		} else if (ata_is_pio(qc->tf.protocol)) {
 			ata_sff_hsm_move(ap, qc, status, 0);
@@ -1068,17 +584,17 @@ DRVSTILLBUSY:
 
 	if (sactive != 0 || (host_pvt.sata_dwc_sactive_issued) > 1 || \
 							tag_mask > 1) {
-		dev_dbg(ap->dev, "%s NCQ:sactive=0x%08x  sactive_issued=0x%08x"
-			"tag_mask=0x%08x\n", __func__, sactive,
-			host_pvt.sata_dwc_sactive_issued, tag_mask);
+		dev_dbg(ap->dev,
+			"%s NCQ:sactive=0x%08x  sactive_issued=0x%08x tag_mask=0x%08x\n",
+			__func__, sactive, host_pvt.sata_dwc_sactive_issued,
+			tag_mask);
 	}
 
 	if ((tag_mask | (host_pvt.sata_dwc_sactive_issued)) != \
 					(host_pvt.sata_dwc_sactive_issued)) {
-		dev_warn(ap->dev, "Bad tag mask?  sactive=0x%08x "
-			 "(host_pvt.sata_dwc_sactive_issued)=0x%08x  tag_mask"
-			 "=0x%08x\n", sactive, host_pvt.sata_dwc_sactive_issued,
-			  tag_mask);
+		dev_warn(ap->dev,
+			 "Bad tag mask?  sactive=0x%08x (host_pvt.sata_dwc_sactive_issued)=0x%08x  tag_mask=0x%08x\n",
+			 sactive, host_pvt.sata_dwc_sactive_issued, tag_mask);
 	}
 
 	/* read just to clear ... not bad if currently still busy */
@@ -1114,12 +630,12 @@ DRVSTILLBUSY:
 		dev_dbg(ap->dev, "%s NCQ command, protocol: %s\n", __func__,
 			get_prot_descript(qc->tf.protocol));
 		if (ata_is_dma(qc->tf.protocol)) {
-			host_pvt.dma_interrupt_count++;
+			hsdevp->dma_interrupt_count++;
 			if (hsdevp->dma_pending[tag] == \
 					SATA_DWC_DMA_PENDING_NONE)
 				dev_warn(ap->dev, "%s: DMA not pending?\n",
 					__func__);
-			if ((host_pvt.dma_interrupt_count % 2) == 0)
+			if ((hsdevp->dma_interrupt_count % 2) == 0)
 				sata_dwc_dma_xfer_complete(ap, 1);
 		} else {
 			if (unlikely(sata_dwc_qc_complete(ap, qc, 1)))
@@ -1142,8 +658,9 @@ STILLBUSY:
 	 */
 	sactive2 = core_scr_read(SCR_ACTIVE);
 	if (sactive2 != sactive) {
-		dev_dbg(ap->dev, "More completed - sactive=0x%x sactive2"
-			"=0x%x\n", sactive, sactive2);
+		dev_dbg(ap->dev,
+			"More completed - sactive=0x%x sactive2=0x%x\n",
+			sactive, sactive2);
 	}
 	handled = 1;
 
@@ -1169,11 +686,10 @@ static void sata_dwc_clear_dmacr(struct sata_dwc_device_port *hsdevp, u8 tag)
 		 * This should not happen, it indicates the driver is out of
 		 * sync.  If it does happen, clear dmacr anyway.
 		 */
-		dev_err(host_pvt.dwc_dev, "%s DMA protocol RX and"
-			"TX DMA not pending tag=0x%02x pending=%d"
-			" dmacr: 0x%08x\n", __func__, tag,
-			hsdevp->dma_pending[tag],
-			in_le32(&(hsdev->sata_dwc_regs->dmacr)));
+		dev_err(hsdev->dev,
+			"%s DMA protocol RX and TX DMA not pending tag=0x%02x pending=%d dmacr: 0x%08x\n",
+			__func__, tag, hsdevp->dma_pending[tag],
+			in_le32(&hsdev->sata_dwc_regs->dmacr));
 		out_le32(&(hsdev->sata_dwc_regs->dmacr),
 			SATA_DWC_DMACR_TXRXCH_CLEAR);
 	}
@@ -1195,8 +711,9 @@ static void sata_dwc_dma_xfer_complete(struct ata_port *ap, u32 check_status)
 
 #ifdef DEBUG_NCQ
 	if (tag > 0) {
-		dev_info(ap->dev, "%s tag=%u cmd=0x%02x dma dir=%s proto=%s "
-			 "dmacr=0x%08x\n", __func__, qc->tag, qc->tf.command,
+		dev_info(ap->dev,
+			 "%s tag=%u cmd=0x%02x dma dir=%s proto=%s dmacr=0x%08x\n",
+			 __func__, qc->tag, qc->tf.command,
 			 get_dma_dir_descript(qc->dma_dir),
 			 get_prot_descript(qc->tf.protocol),
 			 in_le32(&(hsdev->sata_dwc_regs->dmacr)));
@@ -1205,8 +722,9 @@ static void sata_dwc_dma_xfer_complete(struct ata_port *ap, u32 check_status)
 
 	if (ata_is_dma(qc->tf.protocol)) {
 		if (hsdevp->dma_pending[tag] == SATA_DWC_DMA_PENDING_NONE) {
-			dev_err(ap->dev, "%s DMA protocol RX and TX DMA not "
-				"pending dmacr: 0x%08x\n", __func__,
+			dev_err(ap->dev,
+				"%s DMA protocol RX and TX DMA not pending dmacr: 0x%08x\n",
+				__func__,
 				in_le32(&(hsdev->sata_dwc_regs->dmacr)));
 		}
 
@@ -1232,9 +750,9 @@ static int sata_dwc_qc_complete(struct ata_port *ap, struct ata_queued_cmd *qc,
 		dev_err(ap->dev, "TX DMA PENDING\n");
 	else if (hsdevp->dma_pending[tag] == SATA_DWC_DMA_PENDING_RX)
 		dev_err(ap->dev, "RX DMA PENDING\n");
-	dev_dbg(ap->dev, "QC complete cmd=0x%02x status=0x%02x ata%u:"
-		" protocol=%d\n", qc->tf.command, status, ap->print_id,
-		 qc->tf.protocol);
+	dev_dbg(ap->dev,
+		"QC complete cmd=0x%02x status=0x%02x ata%u: protocol=%d\n",
+		qc->tf.command, status, ap->print_id, qc->tf.protocol);
 
 	/* clear active bit */
 	mask = (~(qcmd_tag_to_mask(tag)));
@@ -1260,11 +778,23 @@ static void sata_dwc_enable_interrupts(struct sata_dwc_device *hsdev)
 	 */
 	out_le32(&hsdev->sata_dwc_regs->errmr, SATA_DWC_SERROR_ERR_BITS);
 
-	dev_dbg(host_pvt.dwc_dev, "%s: INTMR = 0x%08x, ERRMR = 0x%08x\n",
+	dev_dbg(hsdev->dev, "%s: INTMR = 0x%08x, ERRMR = 0x%08x\n",
 		 __func__, in_le32(&hsdev->sata_dwc_regs->intmr),
 		in_le32(&hsdev->sata_dwc_regs->errmr));
 }
 
+static bool sata_dwc_dma_filter(struct dma_chan *chan, void *param)
+{
+	struct sata_dwc_device_port *hsdevp = param;
+	struct dw_dma_slave *dws = hsdevp->dws;
+
+	if (dws->dma_dev != chan->device->dev)
+		return false;
+
+	chan->private = dws;
+	return true;
+}
+
 static void sata_dwc_setup_port(struct ata_ioports *port, unsigned long base)
 {
 	port->cmd_addr = (void __iomem *)base + 0x00;
@@ -1299,6 +829,7 @@ static int sata_dwc_port_start(struct ata_port *ap)
 	struct sata_dwc_device *hsdev;
 	struct sata_dwc_device_port *hsdevp = NULL;
 	struct device *pdev;
+	dma_cap_mask_t mask;
 	int i;
 
 	hsdev = HSDEV_FROM_AP(ap);
@@ -1322,29 +853,27 @@ static int sata_dwc_port_start(struct ata_port *ap)
 	}
 	hsdevp->hsdev = hsdev;
 
+	hsdevp->dws = &sata_dwc_dma_dws;
+	hsdevp->dws->dma_dev = hsdev->dev;
+
+	dma_cap_zero(mask);
+	dma_cap_set(DMA_SLAVE, mask);
+
+	/* Acquire DMA channel */
+	hsdevp->chan = dma_request_channel(mask, sata_dwc_dma_filter, hsdevp);
+	if (!hsdevp->chan) {
+		dev_err(hsdev->dev, "%s: dma channel unavailable\n",
+			 __func__);
+		err = -EAGAIN;
+		goto CLEANUP_ALLOC;
+	}
+
 	for (i = 0; i < SATA_DWC_QCMD_MAX; i++)
 		hsdevp->cmd_issued[i] = SATA_DWC_CMD_ISSUED_NOT;
 
 	ap->bmdma_prd = NULL;	/* set these so libata doesn't use them */
 	ap->bmdma_prd_dma = 0;
 
-	/*
-	 * DMA - Assign scatter gather LLI table. We can't use the libata
-	 * version since it's PRD is IDE PCI specific.
-	 */
-	for (i = 0; i < SATA_DWC_QCMD_MAX; i++) {
-		hsdevp->llit[i] = dma_alloc_coherent(pdev,
-						     SATA_DWC_DMAC_LLI_TBL_SZ,
-						     &(hsdevp->llit_dma[i]),
-						     GFP_ATOMIC);
-		if (!hsdevp->llit[i]) {
-			dev_err(ap->dev, "%s: dma_alloc_coherent failed\n",
-				 __func__);
-			err = -ENOMEM;
-			goto CLEANUP_ALLOC;
-		}
-	}
-
 	if (ap->port_no == 0)  {
 		dev_dbg(ap->dev, "%s: clearing TXCHEN, RXCHEN in DMAC\n",
 			__func__);
@@ -1373,22 +902,14 @@ CLEANUP:
 
 static void sata_dwc_port_stop(struct ata_port *ap)
 {
-	int i;
-	struct sata_dwc_device *hsdev = HSDEV_FROM_AP(ap);
 	struct sata_dwc_device_port *hsdevp = HSDEVP_FROM_AP(ap);
 
 	dev_dbg(ap->dev, "%s: ap->id = %d\n", __func__, ap->print_id);
 
-	if (hsdevp && hsdev) {
-		/* deallocate LLI table */
-		for (i = 0; i < SATA_DWC_QCMD_MAX; i++) {
-			dma_free_coherent(ap->host->dev,
-					  SATA_DWC_DMAC_LLI_TBL_SZ,
-					 hsdevp->llit[i], hsdevp->llit_dma[i]);
-		}
+	dmaengine_terminate_all(hsdevp->chan);
+	dma_release_channel(hsdevp->chan);
 
-		kfree(hsdevp);
-	}
+	kfree(hsdevp);
 	ap->private_data = NULL;
 }
 
@@ -1444,12 +965,12 @@ static void sata_dwc_bmdma_setup(struct ata_queued_cmd *qc)
 static void sata_dwc_bmdma_start_by_tag(struct ata_queued_cmd *qc, u8 tag)
 {
 	int start_dma;
-	u32 reg, dma_chan;
+	u32 reg;
 	struct sata_dwc_device *hsdev = HSDEV_FROM_QC(qc);
 	struct ata_port *ap = qc->ap;
 	struct sata_dwc_device_port *hsdevp = HSDEVP_FROM_AP(ap);
+	struct dma_async_tx_descriptor *desc = hsdevp->desc[tag];
 	int dir = qc->dma_dir;
-	dma_chan = hsdevp->dma_chan[tag];
 
 	if (hsdevp->cmd_issued[tag] != SATA_DWC_CMD_ISSUED_NOT) {
 		start_dma = 1;
@@ -1458,16 +979,17 @@ static void sata_dwc_bmdma_start_by_tag(struct ata_queued_cmd *qc, u8 tag)
 		else
 			hsdevp->dma_pending[tag] = SATA_DWC_DMA_PENDING_RX;
 	} else {
-		dev_err(ap->dev, "%s: Command not pending cmd_issued=%d "
-			"(tag=%d) DMA NOT started\n", __func__,
-			hsdevp->cmd_issued[tag], tag);
+		dev_err(ap->dev,
+			"%s: Command not pending cmd_issued=%d (tag=%d) DMA NOT started\n",
+			__func__, hsdevp->cmd_issued[tag], tag);
 		start_dma = 0;
 	}
 
-	dev_dbg(ap->dev, "%s qc=%p tag: %x cmd: 0x%02x dma_dir: %s "
-		"start_dma? %x\n", __func__, qc, tag, qc->tf.command,
+	dev_dbg(ap->dev,
+		"%s qc=%p tag: %x cmd: 0x%02x dma_dir: %s start_dma? %x\n",
+		__func__, qc, tag, qc->tf.command,
 		get_dma_dir_descript(qc->dma_dir), start_dma);
-	sata_dwc_tf_dump(&(qc->tf));
+	sata_dwc_tf_dump(ap, &qc->tf);
 
 	if (start_dma) {
 		reg = core_scr_read(SCR_ERROR);
@@ -1484,7 +1006,8 @@ static void sata_dwc_bmdma_start_by_tag(struct ata_queued_cmd *qc, u8 tag)
 				SATA_DWC_DMACR_RXCHEN);
 
 		/* Enable AHB DMA transfer on the specified channel */
-		dma_dwc_xfer_start(dma_chan);
+		dmaengine_submit(desc);
+		dma_async_issue_pending(hsdevp->chan);
 	}
 }
 
@@ -1510,26 +1033,21 @@ static void sata_dwc_bmdma_start(struct ata_queued_cmd *qc)
  */
 static void sata_dwc_qc_prep_by_tag(struct ata_queued_cmd *qc, u8 tag)
 {
-	struct scatterlist *sg = qc->sg;
+	struct dma_async_tx_descriptor *desc;
 	struct ata_port *ap = qc->ap;
-	int dma_chan;
-	struct sata_dwc_device *hsdev = HSDEV_FROM_AP(ap);
 	struct sata_dwc_device_port *hsdevp = HSDEVP_FROM_AP(ap);
 
 	dev_dbg(ap->dev, "%s: port=%d dma dir=%s n_elem=%d\n",
 		__func__, ap->port_no, get_dma_dir_descript(qc->dma_dir),
 		 qc->n_elem);
 
-	dma_chan = dma_dwc_xfer_setup(sg, qc->n_elem, hsdevp->llit[tag],
-				      hsdevp->llit_dma[tag],
-				      (void __iomem *)&hsdev->sata_dwc_regs->dmadr,
-				      qc->dma_dir);
-	if (dma_chan < 0) {
-		dev_err(ap->dev, "%s: dma_dwc_xfer_setup returns err %d\n",
-			__func__, dma_chan);
+	desc = dma_dwc_xfer_setup(qc);
+	if (!desc) {
+		dev_err(ap->dev, "%s: dma_dwc_xfer_setup returns NULL\n",
+			__func__);
 		return;
 	}
-	hsdevp->dma_chan[tag] = dma_chan;
+	hsdevp->desc[tag] = desc;
 }
 
 static unsigned int sata_dwc_qc_issue(struct ata_queued_cmd *qc)
@@ -1540,8 +1058,8 @@ static unsigned int sata_dwc_qc_issue(struct ata_queued_cmd *qc)
 
 #ifdef DEBUG_NCQ
 	if (qc->tag > 0 || ap->link.sactive > 1)
-		dev_info(ap->dev, "%s ap id=%d cmd(0x%02x)=%s qc tag=%d "
-			 "prot=%s ap active_tag=0x%08x ap sactive=0x%08x\n",
+		dev_info(ap->dev,
+			 "%s ap id=%d cmd(0x%02x)=%s qc tag=%d prot=%s ap active_tag=0x%08x ap sactive=0x%08x\n",
 			 __func__, ap->print_id, qc->tf.command,
 			 ata_get_cmd_descript(qc->tf.command),
 			 qc->tag, get_prot_descript(qc->tf.protocol),
@@ -1557,9 +1075,9 @@ static unsigned int sata_dwc_qc_issue(struct ata_queued_cmd *qc)
 		sactive |= (0x00000001 << tag);
 		core_scr_write(SCR_ACTIVE, sactive);
 
-		dev_dbg(qc->ap->dev, "%s: tag=%d ap->link.sactive = 0x%08x "
-			"sactive=0x%08x\n", __func__, tag, qc->ap->link.sactive,
-			sactive);
+		dev_dbg(qc->ap->dev,
+			"%s: tag=%d ap->link.sactive = 0x%08x sactive=0x%08x\n",
+			__func__, tag, qc->ap->link.sactive, sactive);
 
 		ap->ops->sff_tf_load(ap, &qc->tf);
 		sata_dwc_exec_command_by_tag(ap, &qc->tf, qc->tag,
@@ -1673,7 +1191,6 @@ static int sata_dwc_probe(struct platform_device *ofdev)
 	struct ata_port_info pi = sata_dwc_port_info[0];
 	const struct ata_port_info *ppi[] = { &pi, NULL };
 	struct device_node *np = ofdev->dev.of_node;
-	u32 dma_chan;
 
 	/* Allocate DWC SATA device */
 	host = ata_host_alloc_pinfo(&ofdev->dev, ppi, SATA_DWC_MAX_PORTS);
@@ -1683,18 +1200,11 @@ static int sata_dwc_probe(struct platform_device *ofdev)
 
 	host->private_data = hsdev;
 
-	if (of_property_read_u32(np, "dma-channel", &dma_chan)) {
-		dev_warn(&ofdev->dev, "no dma-channel property set."
-			 " Use channel 0\n");
-		dma_chan = 0;
-	}
-	host_pvt.dma_channel = dma_chan;
-
 	/* Ioremap SATA registers */
 	base = of_iomap(np, 0);
 	if (!base) {
-		dev_err(&ofdev->dev, "ioremap failed for SATA register"
-			" address\n");
+		dev_err(&ofdev->dev,
+			"ioremap failed for SATA register address\n");
 		return -ENODEV;
 	}
 	hsdev->reg_base = base;
@@ -1716,27 +1226,29 @@ static int sata_dwc_probe(struct platform_device *ofdev)
 		   idr, ver[0], ver[1], ver[2]);
 
 	/* Get SATA DMA interrupt number */
-	irq = irq_of_parse_and_map(np, 1);
-	if (irq == NO_IRQ) {
+	hsdev->dma->irq = irq_of_parse_and_map(np, 1);
+	if (hsdev->dma->irq == NO_IRQ) {
 		dev_err(&ofdev->dev, "no SATA DMA irq\n");
 		err = -ENODEV;
 		goto error_iomap;
 	}
 
 	/* Get physical SATA DMA register base address */
-	host_pvt.sata_dma_regs = (void *)of_iomap(np, 1);
-	if (!(host_pvt.sata_dma_regs)) {
-		dev_err(&ofdev->dev, "ioremap failed for AHBDMA register"
-			" address\n");
+	hsdev->dma->regs = of_iomap(np, 1);
+	if (!hsdev->dma->regs) {
+		dev_err(&ofdev->dev,
+			"ioremap failed for AHBDMA register address\n");
 		err = -ENODEV;
 		goto error_iomap;
 	}
 
 	/* Save dev for later use in dev_xxx() routines */
-	host_pvt.dwc_dev = &ofdev->dev;
+	hsdev->dev = &ofdev->dev;
+
+	hsdev->dma->dev = &ofdev->dev;
 
 	/* Initialize AHB DMAC */
-	err = dma_dwc_init(hsdev, irq);
+	err = dw_dma_probe(hsdev->dma, NULL);
 	if (err)
 		goto error_dma_iomap;
 
@@ -1765,9 +1277,9 @@ static int sata_dwc_probe(struct platform_device *ofdev)
 
 error_out:
 	/* Free SATA DMA resources */
-	dma_dwc_exit(hsdev);
+	dw_dma_remove(hsdev->dma);
 error_dma_iomap:
-	iounmap((void __iomem *)host_pvt.sata_dma_regs);
+	iounmap(hsdev->dma->regs);
 error_iomap:
 	iounmap(base);
 	return err;
@@ -1782,9 +1294,9 @@ static int sata_dwc_remove(struct platform_device *ofdev)
 	ata_host_detach(host);
 
 	/* Free SATA DMA resources */
-	dma_dwc_exit(hsdev);
+	dw_dma_remove(hsdev->dma);
 
-	iounmap((void __iomem *)host_pvt.sata_dma_regs);
+	iounmap(hsdev->dma->regs);
 	iounmap(hsdev->reg_base);
 	dev_dbg(&ofdev->dev, "done\n");
 	return 0;
@@ -1809,5 +1321,5 @@ module_platform_driver(sata_dwc_driver);
 
 MODULE_LICENSE("GPL");
 MODULE_AUTHOR("Mark Miesfeld <mmiesfeld@amcc.com>");
-MODULE_DESCRIPTION("DesignWare Cores SATA controller low lever driver");
+MODULE_DESCRIPTION("DesignWare Cores SATA controller low level driver");
 MODULE_VERSION(DRV_VERSION);
diff --git a/drivers/ata/sata_inic162x.c b/drivers/ata/sata_inic162x.c
index 069827826b20..e81a8217f1ff 100644
--- a/drivers/ata/sata_inic162x.c
+++ b/drivers/ata/sata_inic162x.c
@@ -856,13 +856,13 @@ static int inic_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 	}
 
 	/* Set dma_mask.  This devices doesn't support 64bit addressing. */
-	rc = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
+	rc = dma_set_mask(&pdev->dev, DMA_BIT_MASK(32));
 	if (rc) {
 		dev_err(&pdev->dev, "32-bit DMA enable failed\n");
 		return rc;
 	}
 
-	rc = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32));
+	rc = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32));
 	if (rc) {
 		dev_err(&pdev->dev, "32-bit consistent DMA enable failed\n");
 		return rc;
diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c
index f8c33e3772b8..bd74ee555278 100644
--- a/drivers/ata/sata_mv.c
+++ b/drivers/ata/sata_mv.c
@@ -306,6 +306,11 @@ enum {
 	MV5_PHY_CTL		= 0x0C,
 	SATA_IFCFG		= 0x050,
 	LP_PHY_CTL		= 0x058,
+	LP_PHY_CTL_PIN_PU_PLL   = (1 << 0),
+	LP_PHY_CTL_PIN_PU_RX    = (1 << 1),
+	LP_PHY_CTL_PIN_PU_TX    = (1 << 2),
+	LP_PHY_CTL_GEN_TX_3G    = (1 << 5),
+	LP_PHY_CTL_GEN_RX_3G    = (1 << 9),
 
 	MV_M2_PREAMP_MASK	= 0x7e0,
 
@@ -1391,10 +1396,17 @@ static int mv_scr_write(struct ata_link *link, unsigned int sc_reg_in, u32 val)
 				/*
 				 * Set PHY speed according to SControl speed.
 				 */
-				if ((val & 0xf0) == 0x10)
-					writelfl(0x7, lp_phy_addr);
-				else
-					writelfl(0x227, lp_phy_addr);
+				u32 lp_phy_val =
+					LP_PHY_CTL_PIN_PU_PLL |
+					LP_PHY_CTL_PIN_PU_RX  |
+					LP_PHY_CTL_PIN_PU_TX;
+
+				if ((val & 0xf0) != 0x10)
+					lp_phy_val |=
+						LP_PHY_CTL_GEN_TX_3G |
+						LP_PHY_CTL_GEN_RX_3G;
+
+				writelfl(lp_phy_val, lp_phy_addr);
 			}
 		}
 		writelfl(val, addr);
@@ -4308,10 +4320,10 @@ static int pci_go_64(struct pci_dev *pdev)
 {
 	int rc;
 
-	if (!pci_set_dma_mask(pdev, DMA_BIT_MASK(64))) {
-		rc = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(64));
+	if (!dma_set_mask(&pdev->dev, DMA_BIT_MASK(64))) {
+		rc = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(64));
 		if (rc) {
-			rc = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32));
+			rc = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32));
 			if (rc) {
 				dev_err(&pdev->dev,
 					"64-bit DMA enable failed\n");
@@ -4319,12 +4331,12 @@ static int pci_go_64(struct pci_dev *pdev)
 			}
 		}
 	} else {
-		rc = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
+		rc = dma_set_mask(&pdev->dev, DMA_BIT_MASK(32));
 		if (rc) {
 			dev_err(&pdev->dev, "32-bit DMA enable failed\n");
 			return rc;
 		}
-		rc = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32));
+		rc = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32));
 		if (rc) {
 			dev_err(&pdev->dev,
 				"32-bit consistent DMA enable failed\n");
diff --git a/drivers/ata/sata_nv.c b/drivers/ata/sata_nv.c
index 1db6f5ce5e89..7ece85f43020 100644
--- a/drivers/ata/sata_nv.c
+++ b/drivers/ata/sata_nv.c
@@ -756,10 +756,10 @@ static int nv_adma_slave_config(struct scsi_device *sdev)
 			blk_queue_bounce_limit(sdev1->request_queue,
 					       ATA_DMA_MASK);
 
-		pci_set_dma_mask(pdev, ATA_DMA_MASK);
+		dma_set_mask(&pdev->dev, ATA_DMA_MASK);
 	} else {
 		/** This shouldn't fail as it was set to this value before */
-		pci_set_dma_mask(pdev, pp->adma_dma_mask);
+		dma_set_mask(&pdev->dev, pp->adma_dma_mask);
 		if (sdev0)
 			blk_queue_bounce_limit(sdev0->request_queue,
 					       pp->adma_dma_mask);
@@ -1133,10 +1133,10 @@ static int nv_adma_port_start(struct ata_port *ap)
 
 	/* Ensure DMA mask is set to 32-bit before allocating legacy PRD and
 	   pad buffers */
-	rc = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
+	rc = dma_set_mask(&pdev->dev, DMA_BIT_MASK(32));
 	if (rc)
 		return rc;
-	rc = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32));
+	rc = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32));
 	if (rc)
 		return rc;
 
@@ -1161,8 +1161,8 @@ static int nv_adma_port_start(struct ata_port *ap)
 	   These are allowed to fail since we store the value that ends up
 	   being used to set as the bounce limit in slave_config later if
 	   needed. */
-	pci_set_dma_mask(pdev, DMA_BIT_MASK(64));
-	pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(64));
+	dma_set_mask(&pdev->dev, DMA_BIT_MASK(64));
+	dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(64));
 	pp->adma_dma_mask = *dev->dma_mask;
 
 	mem = dmam_alloc_coherent(dev, NV_ADMA_PORT_PRIV_DMA_SZ,
diff --git a/drivers/ata/sata_promise.c b/drivers/ata/sata_promise.c
index 3638887476f6..0fa211e2831c 100644
--- a/drivers/ata/sata_promise.c
+++ b/drivers/ata/sata_promise.c
@@ -1246,10 +1246,10 @@ static int pdc_ata_init_one(struct pci_dev *pdev,
 	/* initialize adapter */
 	pdc_host_init(host);
 
-	rc = pci_set_dma_mask(pdev, ATA_DMA_MASK);
+	rc = dma_set_mask(&pdev->dev, ATA_DMA_MASK);
 	if (rc)
 		return rc;
-	rc = pci_set_consistent_dma_mask(pdev, ATA_DMA_MASK);
+	rc = dma_set_coherent_mask(&pdev->dev, ATA_DMA_MASK);
 	if (rc)
 		return rc;
 
diff --git a/drivers/ata/sata_qstor.c b/drivers/ata/sata_qstor.c
index 9a6bd4cd29a0..af987a4f33d1 100644
--- a/drivers/ata/sata_qstor.c
+++ b/drivers/ata/sata_qstor.c
@@ -557,10 +557,10 @@ static int qs_set_dma_masks(struct pci_dev *pdev, void __iomem *mmio_base)
 	int rc, have_64bit_bus = (bus_info & QS_HPHY_64BIT);
 
 	if (have_64bit_bus &&
-	    !pci_set_dma_mask(pdev, DMA_BIT_MASK(64))) {
-		rc = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(64));
+	    !dma_set_mask(&pdev->dev, DMA_BIT_MASK(64))) {
+		rc = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(64));
 		if (rc) {
-			rc = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32));
+			rc = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32));
 			if (rc) {
 				dev_err(&pdev->dev,
 					"64-bit DMA enable failed\n");
@@ -568,12 +568,12 @@ static int qs_set_dma_masks(struct pci_dev *pdev, void __iomem *mmio_base)
 			}
 		}
 	} else {
-		rc = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
+		rc = dma_set_mask(&pdev->dev, DMA_BIT_MASK(32));
 		if (rc) {
 			dev_err(&pdev->dev, "32-bit DMA enable failed\n");
 			return rc;
 		}
-		rc = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32));
+		rc = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32));
 		if (rc) {
 			dev_err(&pdev->dev,
 				"32-bit consistent DMA enable failed\n");
diff --git a/drivers/ata/sata_sil.c b/drivers/ata/sata_sil.c
index 40b76b2d18c6..dea6edcbf145 100644
--- a/drivers/ata/sata_sil.c
+++ b/drivers/ata/sata_sil.c
@@ -770,10 +770,10 @@ static int sil_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 		return rc;
 	host->iomap = pcim_iomap_table(pdev);
 
-	rc = pci_set_dma_mask(pdev, ATA_DMA_MASK);
+	rc = dma_set_mask(&pdev->dev, ATA_DMA_MASK);
 	if (rc)
 		return rc;
-	rc = pci_set_consistent_dma_mask(pdev, ATA_DMA_MASK);
+	rc = dma_set_coherent_mask(&pdev->dev, ATA_DMA_MASK);
 	if (rc)
 		return rc;
 
diff --git a/drivers/ata/sata_sil24.c b/drivers/ata/sata_sil24.c
index ba2667fa0528..4b1995e2d044 100644
--- a/drivers/ata/sata_sil24.c
+++ b/drivers/ata/sata_sil24.c
@@ -246,7 +246,7 @@ enum {
 	/* host flags */
 	SIL24_COMMON_FLAGS	= ATA_FLAG_SATA | ATA_FLAG_PIO_DMA |
 				  ATA_FLAG_NCQ | ATA_FLAG_ACPI_SATA |
-				  ATA_FLAG_AN | ATA_FLAG_PMP | ATA_FLAG_LOWTAG,
+				  ATA_FLAG_AN | ATA_FLAG_PMP,
 	SIL24_FLAG_PCIX_IRQ_WOC	= (1 << 24), /* IRQ loss errata on PCI-X */
 
 	IRQ_STAT_4PORTS		= 0xf,
@@ -1312,10 +1312,10 @@ static int sil24_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 	host->iomap = iomap;
 
 	/* configure and activate the device */
-	if (!pci_set_dma_mask(pdev, DMA_BIT_MASK(64))) {
-		rc = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(64));
+	if (!dma_set_mask(&pdev->dev, DMA_BIT_MASK(64))) {
+		rc = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(64));
 		if (rc) {
-			rc = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32));
+			rc = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32));
 			if (rc) {
 				dev_err(&pdev->dev,
 					"64-bit DMA enable failed\n");
@@ -1323,12 +1323,12 @@ static int sil24_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 			}
 		}
 	} else {
-		rc = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
+		rc = dma_set_mask(&pdev->dev, DMA_BIT_MASK(32));
 		if (rc) {
 			dev_err(&pdev->dev, "32-bit DMA enable failed\n");
 			return rc;
 		}
-		rc = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32));
+		rc = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32));
 		if (rc) {
 			dev_err(&pdev->dev,
 				"32-bit consistent DMA enable failed\n");
diff --git a/drivers/ata/sata_svw.c b/drivers/ata/sata_svw.c
index c630fa812624..ff8307b30ff0 100644
--- a/drivers/ata/sata_svw.c
+++ b/drivers/ata/sata_svw.c
@@ -496,10 +496,10 @@ static int k2_sata_init_one(struct pci_dev *pdev, const struct pci_device_id *en
 		ata_port_pbar_desc(ap, 5, offset, "port");
 	}
 
-	rc = pci_set_dma_mask(pdev, ATA_DMA_MASK);
+	rc = dma_set_mask(&pdev->dev, ATA_DMA_MASK);
 	if (rc)
 		return rc;
-	rc = pci_set_consistent_dma_mask(pdev, ATA_DMA_MASK);
+	rc = dma_set_coherent_mask(&pdev->dev, ATA_DMA_MASK);
 	if (rc)
 		return rc;
 
diff --git a/drivers/ata/sata_sx4.c b/drivers/ata/sata_sx4.c
index 39b5de60a1f9..3a18a8a719b4 100644
--- a/drivers/ata/sata_sx4.c
+++ b/drivers/ata/sata_sx4.c
@@ -1476,10 +1476,10 @@ static int pdc_sata_init_one(struct pci_dev *pdev,
 	}
 
 	/* configure and activate */
-	rc = pci_set_dma_mask(pdev, ATA_DMA_MASK);
+	rc = dma_set_mask(&pdev->dev, ATA_DMA_MASK);
 	if (rc)
 		return rc;
-	rc = pci_set_consistent_dma_mask(pdev, ATA_DMA_MASK);
+	rc = dma_set_coherent_mask(&pdev->dev, ATA_DMA_MASK);
 	if (rc)
 		return rc;
 
diff --git a/drivers/ata/sata_via.c b/drivers/ata/sata_via.c
index 47bf89464cef..17d31fc009ab 100644
--- a/drivers/ata/sata_via.c
+++ b/drivers/ata/sata_via.c
@@ -502,10 +502,10 @@ static int vt6421_prepare_host(struct pci_dev *pdev, struct ata_host **r_host)
 	for (i = 0; i < host->n_ports; i++)
 		vt6421_init_addrs(host->ports[i]);
 
-	rc = pci_set_dma_mask(pdev, ATA_DMA_MASK);
+	rc = dma_set_mask(&pdev->dev, ATA_DMA_MASK);
 	if (rc)
 		return rc;
-	rc = pci_set_consistent_dma_mask(pdev, ATA_DMA_MASK);
+	rc = dma_set_coherent_mask(&pdev->dev, ATA_DMA_MASK);
 	if (rc)
 		return rc;
 
diff --git a/drivers/ata/sata_vsc.c b/drivers/ata/sata_vsc.c
index 29e847aac34b..183eb52085df 100644
--- a/drivers/ata/sata_vsc.c
+++ b/drivers/ata/sata_vsc.c
@@ -387,10 +387,10 @@ static int vsc_sata_init_one(struct pci_dev *pdev,
 	/*
 	 * Use 32 bit DMA mask, because 64 bit address support is poor.
 	 */
-	rc = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
+	rc = dma_set_mask(&pdev->dev, DMA_BIT_MASK(32));
 	if (rc)
 		return rc;
-	rc = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32));
+	rc = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32));
 	if (rc)
 		return rc;
 
diff --git a/drivers/ide/ide-lib.c b/drivers/ide/ide-lib.c
index d9c9829c8b20..e1180fa46196 100644
--- a/drivers/ide/ide-lib.c
+++ b/drivers/ide/ide-lib.c
@@ -148,8 +148,8 @@ u8 ide_dump_status(ide_drive_t *drive, const char *msg, u8 stat)
 			printk(KERN_CONT "DataRequest ");
 		if (stat & ATA_CORR)
 			printk(KERN_CONT "CorrectedError ");
-		if (stat & ATA_IDX)
-			printk(KERN_CONT "Index ");
+		if (stat & ATA_SENSE)
+			printk(KERN_CONT "Sense ");
 		if (stat & ATA_ERR)
 			printk(KERN_CONT "Error ");
 	}
diff --git a/drivers/ide/ide-probe.c b/drivers/ide/ide-probe.c
index a3d3b1733c49..0b63facd1d87 100644
--- a/drivers/ide/ide-probe.c
+++ b/drivers/ide/ide-probe.c
@@ -273,7 +273,7 @@ int ide_dev_read_id(ide_drive_t *drive, u8 cmd, u16 *id, int irq_ctx)
 	    (hwif->host_flags & IDE_HFLAG_BROKEN_ALTSTATUS) == 0) {
 		a = tp_ops->read_altstatus(hwif);
 		s = tp_ops->read_status(hwif);
-		if ((a ^ s) & ~ATA_IDX)
+		if ((a ^ s) & ~ATA_SENSE)
 			/* ancient Seagate drives, broken interfaces */
 			printk(KERN_INFO "%s: probing with STATUS(0x%02x) "
 					 "instead of ALTSTATUS(0x%02x)\n",
diff --git a/drivers/scsi/scsi_error.c b/drivers/scsi/scsi_error.c
index 4cdaffca17fc..c95a4e943fc6 100644
--- a/drivers/scsi/scsi_error.c
+++ b/drivers/scsi/scsi_error.c
@@ -26,6 +26,7 @@
 #include <linux/blkdev.h>
 #include <linux/delay.h>
 #include <linux/jiffies.h>
+#include <asm/unaligned.h>
 
 #include <scsi/scsi.h>
 #include <scsi/scsi_cmnd.h>
@@ -2586,3 +2587,33 @@ void scsi_build_sense_buffer(int desc, u8 *buf, u8 key, u8 asc, u8 ascq)
 	}
 }
 EXPORT_SYMBOL(scsi_build_sense_buffer);
+
+/**
+ * scsi_set_sense_information - set the information field in a
+ *		formatted sense data buffer
+ * @buf:	Where to build sense data
+ * @info:	64-bit information value to be set
+ *
+ **/
+void scsi_set_sense_information(u8 *buf, u64 info)
+{
+	if ((buf[0] & 0x7f) == 0x72) {
+		u8 *ucp, len;
+
+		len = buf[7];
+		ucp = (char *)scsi_sense_desc_find(buf, len + 8, 0);
+		if (!ucp) {
+			buf[7] = len + 0xa;
+			ucp = buf + 8 + len;
+		}
+		ucp[0] = 0;
+		ucp[1] = 0xa;
+		ucp[2] = 0x80; /* Valid bit */
+		ucp[3] = 0;
+		put_unaligned_be64(info, &ucp[4]);
+	} else if ((buf[0] & 0x7f) == 0x70) {
+		buf[0] |= 0x80;
+		put_unaligned_be64(info, &buf[3]);
+	}
+}
+EXPORT_SYMBOL(scsi_set_sense_information);