Automatic merge of rsync://rsync.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6

37 files changed, 2749 insertions, 1142 deletions

diff --git a/drivers/atm/Makefile b/drivers/atm/Makefile
index d1dcd8eae3c9..5b77188527a9 100644
--- a/drivers/atm/Makefile
+++ b/drivers/atm/Makefile
@@ -39,7 +39,8 @@ ifeq ($(CONFIG_ATM_FORE200E_PCA),y)
   fore_200e-objs		+= fore200e_pca_fw.o
   # guess the target endianess to choose the right PCA-200E firmware image
   ifeq ($(CONFIG_ATM_FORE200E_PCA_DEFAULT_FW),y)
-    CONFIG_ATM_FORE200E_PCA_FW = $(shell if test -n "`$(CC) -E -dM $(src)/../../include/asm/byteorder.h | grep ' __LITTLE_ENDIAN '`"; then echo $(obj)/pca200e.bin; else echo $(obj)/pca200e_ecd.bin2; fi)
+    byteorder.h			:= include$(if $(patsubst $(srctree),,$(objtree)),2)/asm/byteorder.h
+    CONFIG_ATM_FORE200E_PCA_FW	:= $(obj)/pca200e$(if $(shell $(CC) -E -dM $(byteorder.h) | grep ' __LITTLE_ENDIAN '),.bin,_ecd.bin2)
   endif
 endif
 
diff --git a/drivers/atm/fore200e.c b/drivers/atm/fore200e.c
index 9e65bfb85ba3..5f702199543a 100644
--- a/drivers/atm/fore200e.c
+++ b/drivers/atm/fore200e.c
@@ -383,8 +383,7 @@ fore200e_shutdown(struct fore200e* fore200e)
     switch(fore200e->state) {
 
     case FORE200E_STATE_COMPLETE:
-	if (fore200e->stats)
-	    kfree(fore200e->stats);
+	kfree(fore200e->stats);
 
     case FORE200E_STATE_IRQ:
 	free_irq(fore200e->irq, fore200e->atm_dev);
@@ -963,8 +962,7 @@ fore200e_tx_irq(struct fore200e* fore200e)
 		entry, txq->tail, entry->vc_map, entry->skb);
 
 	/* free copy of misaligned data */
-	if (entry->data)
-	    kfree(entry->data);
+	kfree(entry->data);
 	
 	/* remove DMA mapping */
 	fore200e->bus->dma_unmap(fore200e, entry->tpd->tsd[ 0 ].buffer, entry->tpd->tsd[ 0 ].length,
diff --git a/drivers/atm/he.c b/drivers/atm/he.c
index 3022c548a132..df2c83fd5496 100644
--- a/drivers/atm/he.c
+++ b/drivers/atm/he.c
@@ -412,8 +412,7 @@ he_init_one(struct pci_dev *pci_dev, const struct pci_device_id *pci_ent)
 init_one_failure:
 	if (atm_dev)
 		atm_dev_deregister(atm_dev);
-	if (he_dev)
-		kfree(he_dev);
+	kfree(he_dev);
 	pci_disable_device(pci_dev);
 	return err;
 }
@@ -2534,8 +2533,7 @@ he_open(struct atm_vcc *vcc)
 open_failed:
 
 	if (err) {
-		if (he_vcc)
-			kfree(he_vcc);
+		kfree(he_vcc);
 		clear_bit(ATM_VF_ADDR, &vcc->flags);
 	}
 	else
diff --git a/drivers/atm/nicstar.c b/drivers/atm/nicstar.c
index 85bf5c8442b0..b2a7b754fd14 100644
--- a/drivers/atm/nicstar.c
+++ b/drivers/atm/nicstar.c
@@ -676,10 +676,10 @@ static int __devinit ns_init_card(int i, struct pci_dev *pcidev)
    PRINTK("nicstar%d: RSQ base at 0x%x.\n", i, (u32) card->rsq.base);
       
    /* Initialize SCQ0, the only VBR SCQ used */
-   card->scq1 = (scq_info *) NULL;
-   card->scq2 = (scq_info *) NULL;
+   card->scq1 = NULL;
+   card->scq2 = NULL;
    card->scq0 = get_scq(VBR_SCQSIZE, NS_VRSCD0);
-   if (card->scq0 == (scq_info *) NULL)
+   if (card->scq0 == NULL)
    {
       printk("nicstar%d: can't get SCQ0.\n", i);
       error = 12;
@@ -993,24 +993,24 @@ static scq_info *get_scq(int size, u32 scd)
    int i;
 
    if (size != VBR_SCQSIZE && size != CBR_SCQSIZE)
-      return (scq_info *) NULL;
+      return NULL;
 
    scq = (scq_info *) kmalloc(sizeof(scq_info), GFP_KERNEL);
-   if (scq == (scq_info *) NULL)
-      return (scq_info *) NULL;
+   if (scq == NULL)
+      return NULL;
    scq->org = kmalloc(2 * size, GFP_KERNEL);
    if (scq->org == NULL)
    {
       kfree(scq);
-      return (scq_info *) NULL;
+      return NULL;
    }
    scq->skb = (struct sk_buff **) kmalloc(sizeof(struct sk_buff *) *
                                           (size / NS_SCQE_SIZE), GFP_KERNEL);
-   if (scq->skb == (struct sk_buff **) NULL)
+   if (scq->skb == NULL)
    {
       kfree(scq->org);
       kfree(scq);
-      return (scq_info *) NULL;
+      return NULL;
    }
    scq->num_entries = size / NS_SCQE_SIZE;
    scq->base = (ns_scqe *) ALIGN_ADDRESS(scq->org, size);
@@ -1498,7 +1498,7 @@ static int ns_open(struct atm_vcc *vcc)
          vc->cbr_scd = NS_FRSCD + frscdi * NS_FRSCD_SIZE;
 
          scq = get_scq(CBR_SCQSIZE, vc->cbr_scd);
-         if (scq == (scq_info *) NULL)
+         if (scq == NULL)
          {
             PRINTK("nicstar%d: can't get fixed rate SCQ.\n", card->index);
             card->scd2vc[frscdi] = NULL;
diff --git a/drivers/atm/zatm.c b/drivers/atm/zatm.c
index 47a800519ad0..8d5e65cb9755 100644
--- a/drivers/atm/zatm.c
+++ b/drivers/atm/zatm.c
@@ -902,7 +902,7 @@ static void close_tx(struct atm_vcc *vcc)
 		zatm_dev->tx_bw += vcc->qos.txtp.min_pcr;
 		dealloc_shaper(vcc->dev,zatm_vcc->shaper);
 	}
-	if (zatm_vcc->ring) kfree(zatm_vcc->ring);
+	kfree(zatm_vcc->ring);
 }
 
 
@@ -1339,12 +1339,9 @@ static int __init zatm_start(struct atm_dev *dev)
 	return 0;
     out:
 	for (i = 0; i < NR_MBX; i++)
-		if (zatm_dev->mbx_start[i] != 0)
-			kfree((void *) zatm_dev->mbx_start[i]);
-	if (zatm_dev->rx_map != NULL)
-		kfree(zatm_dev->rx_map);
-	if (zatm_dev->tx_map != NULL)
-		kfree(zatm_dev->tx_map);
+		kfree(zatm_dev->mbx_start[i]);
+	kfree(zatm_dev->rx_map);
+	kfree(zatm_dev->tx_map);
 	free_irq(zatm_dev->irq, dev);
 	return error;
 }
diff --git a/drivers/block/ub.c b/drivers/block/ub.c
index ce42889f98fb..adc4dcc306f4 100644
--- a/drivers/block/ub.c
+++ b/drivers/block/ub.c
@@ -8,13 +8,12 @@
  * and is not licensed separately. See file COPYING for details.
  *
  * TODO (sorted by decreasing priority)
+ *  -- Kill first_open (Al Viro fixed the block layer now)
  *  -- Do resets with usb_device_reset (needs a thread context, use khubd)
  *  -- set readonly flag for CDs, set removable flag for CF readers
  *  -- do inquiry and verify we got a disk and not a tape (for LUN mismatch)
- *  -- support pphaneuf's SDDR-75 with two LUNs (also broken capacity...)
  *  -- special case some senses, e.g. 3a/0 -> no media present, reduce retries
  *  -- verify the 13 conditions and do bulk resets
- *  -- normal pool of commands instead of cmdv[]?
  *  -- kill last_pipe and simply do two-state clearing on both pipes
  *  -- verify protocol (bulk) from USB descriptors (maybe...)
  *  -- highmem and sg
@@ -49,7 +48,14 @@
 #define US_SC_SCSI	0x06		/* Transparent */
 
 /*
+ * This many LUNs per USB device.
+ * Every one of them takes a host, see UB_MAX_HOSTS.
  */
+#define UB_MAX_LUNS   4
+
+/*
+ */
+
 #define UB_MINORS_PER_MAJOR	8
 
 #define UB_MAX_CDB_SIZE      16		/* Corresponds to Bulk */
@@ -65,7 +71,7 @@ struct bulk_cb_wrap {
 	u32	Tag;			/* unique per command id */
 	__le32	DataTransferLength;	/* size of data */
 	u8	Flags;			/* direction in bit 0 */
-	u8	Lun;			/* LUN normally 0 */
+	u8	Lun;			/* LUN */
 	u8	Length;			/* of of the CDB */
 	u8	CDB[UB_MAX_CDB_SIZE];	/* max command */
 };
@@ -168,6 +174,7 @@ struct ub_scsi_cmd {
 	unsigned int len;		/* Requested length */
 	// struct scatterlist sgv[UB_MAX_REQ_SG];
 
+	struct ub_lun *lun;
 	void (*done)(struct ub_dev *, struct ub_scsi_cmd *);
 	void *back;
 };
@@ -252,25 +259,47 @@ struct ub_scsi_cmd_queue {
 };
 
 /*
- * The UB device instance.
+ * The block device instance (one per LUN).
+ */
+struct ub_lun {
+	struct ub_dev *udev;
+	struct list_head link;
+	struct gendisk *disk;
+	int id;				/* Host index */
+	int num;			/* LUN number */
+	char name[16];
+
+	int changed;			/* Media was changed */
+	int removable;
+	int readonly;
+	int first_open;			/* Kludge. See ub_bd_open. */
+
+	/* Use Ingo's mempool if or when we have more than one command. */
+	/*
+	 * Currently we never need more than one command for the whole device.
+	 * However, giving every LUN a command is a cheap and automatic way
+	 * to enforce fairness between them.
+	 */
+	int cmda[1];
+	struct ub_scsi_cmd cmdv[1];
+
+	struct ub_capacity capacity; 
+};
+
+/*
+ * The USB device instance.
  */
 struct ub_dev {
 	spinlock_t lock;
-	int id;				/* Number among ub's */
 	atomic_t poison;		/* The USB device is disconnected */
 	int openc;			/* protected by ub_lock! */
 					/* kref is too implicit for our taste */
 	unsigned int tagcnt;
-	int changed;			/* Media was changed */
-	int removable;
-	int readonly;
-	int first_open;			/* Kludge. See ub_bd_open. */
-	char name[8];
+	char name[12];
 	struct usb_device *dev;
 	struct usb_interface *intf;
 
-	struct ub_capacity capacity; 
-	struct gendisk *disk;
+	struct list_head luns;
 
 	unsigned int send_bulk_pipe;	/* cached pipe values */
 	unsigned int recv_bulk_pipe;
@@ -279,10 +308,6 @@ struct ub_dev {
 
 	struct tasklet_struct tasklet;
 
-	/* XXX Use Ingo's mempool (once we have more than one) */
-	int cmda[1];
-	struct ub_scsi_cmd cmdv[1];
-
 	struct ub_scsi_cmd_queue cmd_queue;
 	struct ub_scsi_cmd top_rqs_cmd;	/* REQUEST SENSE */
 	unsigned char top_sense[UB_SENSE_SIZE];
@@ -301,9 +326,9 @@ struct ub_dev {
 /*
  */
 static void ub_cleanup(struct ub_dev *sc);
-static int ub_bd_rq_fn_1(struct ub_dev *sc, struct request *rq);
-static int ub_cmd_build_block(struct ub_dev *sc, struct ub_scsi_cmd *cmd,
-    struct request *rq);
+static int ub_bd_rq_fn_1(struct ub_lun *lun, struct request *rq);
+static int ub_cmd_build_block(struct ub_dev *sc, struct ub_lun *lun,
+    struct ub_scsi_cmd *cmd, struct request *rq);
 static int ub_cmd_build_packet(struct ub_dev *sc, struct ub_scsi_cmd *cmd,
     struct request *rq);
 static void ub_rw_cmd_done(struct ub_dev *sc, struct ub_scsi_cmd *cmd);
@@ -320,8 +345,10 @@ static void ub_state_sense(struct ub_dev *sc, struct ub_scsi_cmd *cmd);
 static int ub_submit_clear_stall(struct ub_dev *sc, struct ub_scsi_cmd *cmd,
     int stalled_pipe);
 static void ub_top_sense_done(struct ub_dev *sc, struct ub_scsi_cmd *scmd);
-static int ub_sync_tur(struct ub_dev *sc);
-static int ub_sync_read_cap(struct ub_dev *sc, struct ub_capacity *ret);
+static int ub_sync_tur(struct ub_dev *sc, struct ub_lun *lun);
+static int ub_sync_read_cap(struct ub_dev *sc, struct ub_lun *lun,
+    struct ub_capacity *ret);
+static int ub_probe_lun(struct ub_dev *sc, int lnum);
 
 /*
  */
@@ -342,6 +369,7 @@ MODULE_DEVICE_TABLE(usb, ub_usb_ids);
  */
 #define UB_MAX_HOSTS  26
 static char ub_hostv[UB_MAX_HOSTS];
+
 static DEFINE_SPINLOCK(ub_lock);	/* Locks globals and ->openc */
 
 /*
@@ -406,6 +434,8 @@ static ssize_t ub_diag_show(struct device *dev, char *page)
 {
 	struct usb_interface *intf;
 	struct ub_dev *sc;
+	struct list_head *p;
+	struct ub_lun *lun;
 	int cnt;
 	unsigned long flags;
 	int nc, nh;
@@ -421,9 +451,15 @@ static ssize_t ub_diag_show(struct device *dev, char *page)
 	spin_lock_irqsave(&sc->lock, flags);
 
 	cnt += sprintf(page + cnt,
-	    "qlen %d qmax %d changed %d removable %d readonly %d\n",
-	    sc->cmd_queue.qlen, sc->cmd_queue.qmax,
-	    sc->changed, sc->removable, sc->readonly);
+	    "qlen %d qmax %d\n",
+	    sc->cmd_queue.qlen, sc->cmd_queue.qmax);
+
+	list_for_each (p, &sc->luns) {
+		lun = list_entry(p, struct ub_lun, link);
+		cnt += sprintf(page + cnt,
+		    "lun %u changed %d removable %d readonly %d\n",
+		    lun->num, lun->changed, lun->removable, lun->readonly);
+	}
 
 	if ((nc = sc->tr.cur + 1) == SCMD_TRACE_SZ) nc = 0;
 	for (j = 0; j < SCMD_TRACE_SZ; j++) {
@@ -523,53 +559,63 @@ static void ub_put(struct ub_dev *sc)
  */
 static void ub_cleanup(struct ub_dev *sc)
 {
+	struct list_head *p;
+	struct ub_lun *lun;
 	request_queue_t *q;
 
-	/* I don't think queue can be NULL. But... Stolen from sx8.c */
-	if ((q = sc->disk->queue) != NULL)
-		blk_cleanup_queue(q);
+	while (!list_empty(&sc->luns)) {
+		p = sc->luns.next;
+		lun = list_entry(p, struct ub_lun, link);
+		list_del(p);
 
-	/*
-	 * If we zero disk->private_data BEFORE put_disk, we have to check
-	 * for NULL all over the place in open, release, check_media and
-	 * revalidate, because the block level semaphore is well inside the
-	 * put_disk. But we cannot zero after the call, because *disk is gone.
-	 * The sd.c is blatantly racy in this area.
-	 */
-	/* disk->private_data = NULL; */
-	put_disk(sc->disk);
-	sc->disk = NULL;
+		/* I don't think queue can be NULL. But... Stolen from sx8.c */
+		if ((q = lun->disk->queue) != NULL)
+			blk_cleanup_queue(q);
+		/*
+		 * If we zero disk->private_data BEFORE put_disk, we have
+		 * to check for NULL all over the place in open, release,
+		 * check_media and revalidate, because the block level
+		 * semaphore is well inside the put_disk.
+		 * But we cannot zero after the call, because *disk is gone.
+		 * The sd.c is blatantly racy in this area.
+		 */
+		/* disk->private_data = NULL; */
+		put_disk(lun->disk);
+		lun->disk = NULL;
+
+		ub_id_put(lun->id);
+		kfree(lun);
+	}
 
-	ub_id_put(sc->id);
 	kfree(sc);
 }
 
 /*
  * The "command allocator".
  */
-static struct ub_scsi_cmd *ub_get_cmd(struct ub_dev *sc)
+static struct ub_scsi_cmd *ub_get_cmd(struct ub_lun *lun)
 {
 	struct ub_scsi_cmd *ret;
 
-	if (sc->cmda[0])
+	if (lun->cmda[0])
 		return NULL;
-	ret = &sc->cmdv[0];
-	sc->cmda[0] = 1;
+	ret = &lun->cmdv[0];
+	lun->cmda[0] = 1;
 	return ret;
 }
 
-static void ub_put_cmd(struct ub_dev *sc, struct ub_scsi_cmd *cmd)
+static void ub_put_cmd(struct ub_lun *lun, struct ub_scsi_cmd *cmd)
 {
-	if (cmd != &sc->cmdv[0]) {
+	if (cmd != &lun->cmdv[0]) {
 		printk(KERN_WARNING "%s: releasing a foreign cmd %p\n",
-		    sc->name, cmd);
+		    lun->name, cmd);
 		return;
 	}
-	if (!sc->cmda[0]) {
-		printk(KERN_WARNING "%s: releasing a free cmd\n", sc->name);
+	if (!lun->cmda[0]) {
+		printk(KERN_WARNING "%s: releasing a free cmd\n", lun->name);
 		return;
 	}
-	sc->cmda[0] = 0;
+	lun->cmda[0] = 0;
 }
 
 /*
@@ -630,29 +676,30 @@ static struct ub_scsi_cmd *ub_cmdq_pop(struct ub_dev *sc)
 
 static void ub_bd_rq_fn(request_queue_t *q)
 {
-	struct ub_dev *sc = q->queuedata;
+	struct ub_lun *lun = q->queuedata;
 	struct request *rq;
 
 	while ((rq = elv_next_request(q)) != NULL) {
-		if (ub_bd_rq_fn_1(sc, rq) != 0) {
+		if (ub_bd_rq_fn_1(lun, rq) != 0) {
 			blk_stop_queue(q);
 			break;
 		}
 	}
 }
 
-static int ub_bd_rq_fn_1(struct ub_dev *sc, struct request *rq)
+static int ub_bd_rq_fn_1(struct ub_lun *lun, struct request *rq)
 {
+	struct ub_dev *sc = lun->udev;
 	struct ub_scsi_cmd *cmd;
 	int rc;
 
-	if (atomic_read(&sc->poison) || sc->changed) {
+	if (atomic_read(&sc->poison) || lun->changed) {
 		blkdev_dequeue_request(rq);
 		ub_end_rq(rq, 0);
 		return 0;
 	}
 
-	if ((cmd = ub_get_cmd(sc)) == NULL)
+	if ((cmd = ub_get_cmd(lun)) == NULL)
 		return -1;
 	memset(cmd, 0, sizeof(struct ub_scsi_cmd));
 
@@ -661,32 +708,30 @@ static int ub_bd_rq_fn_1(struct ub_dev *sc, struct request *rq)
 	if (blk_pc_request(rq)) {
 		rc = ub_cmd_build_packet(sc, cmd, rq);
 	} else {
-		rc = ub_cmd_build_block(sc, cmd, rq);
+		rc = ub_cmd_build_block(sc, lun, cmd, rq);
 	}
 	if (rc != 0) {
-		ub_put_cmd(sc, cmd);
+		ub_put_cmd(lun, cmd);
 		ub_end_rq(rq, 0);
-		blk_start_queue(sc->disk->queue);
 		return 0;
 	}
-
 	cmd->state = UB_CMDST_INIT;
+	cmd->lun = lun;
 	cmd->done = ub_rw_cmd_done;
 	cmd->back = rq;
 
 	cmd->tag = sc->tagcnt++;
 	if ((rc = ub_submit_scsi(sc, cmd)) != 0) {
-		ub_put_cmd(sc, cmd);
+		ub_put_cmd(lun, cmd);
 		ub_end_rq(rq, 0);
-		blk_start_queue(sc->disk->queue);
 		return 0;
 	}
 
 	return 0;
 }
 
-static int ub_cmd_build_block(struct ub_dev *sc, struct ub_scsi_cmd *cmd,
-    struct request *rq)
+static int ub_cmd_build_block(struct ub_dev *sc, struct ub_lun *lun,
+    struct ub_scsi_cmd *cmd, struct request *rq)
 {
 	int ub_dir;
 #if 0 /* We use rq->buffer for now */
@@ -707,7 +752,7 @@ static int ub_cmd_build_block(struct ub_dev *sc, struct ub_scsi_cmd *cmd,
 	sg = &cmd->sgv[0];
 	n_elem = blk_rq_map_sg(q, rq, sg);
 	if (n_elem <= 0) {
-		ub_put_cmd(sc, cmd);
+		ub_put_cmd(lun, cmd);
 		ub_end_rq(rq, 0);
 		blk_start_queue(q);
 		return 0;		/* request with no s/g entries? */
@@ -716,7 +761,7 @@ static int ub_cmd_build_block(struct ub_dev *sc, struct ub_scsi_cmd *cmd,
 	if (n_elem != 1) {		/* Paranoia */
 		printk(KERN_WARNING "%s: request with %d segments\n",
 		    sc->name, n_elem);
-		ub_put_cmd(sc, cmd);
+		ub_put_cmd(lun, cmd);
 		ub_end_rq(rq, 0);
 		blk_start_queue(q);
 		return 0;
@@ -748,8 +793,8 @@ static int ub_cmd_build_block(struct ub_dev *sc, struct ub_scsi_cmd *cmd,
 	 * The call to blk_queue_hardsect_size() guarantees that request
 	 * is aligned, but it is given in terms of 512 byte units, always.
 	 */
-	block = rq->sector >> sc->capacity.bshift;
-	nblks = rq->nr_sectors >> sc->capacity.bshift;
+	block = rq->sector >> lun->capacity.bshift;
+	nblks = rq->nr_sectors >> lun->capacity.bshift;
 
 	cmd->cdb[0] = (ub_dir == UB_DIR_READ)? READ_10: WRITE_10;
 	/* 10-byte uses 4 bytes of LBA: 2147483648KB, 2097152MB, 2048GB */
@@ -803,7 +848,8 @@ static int ub_cmd_build_packet(struct ub_dev *sc, struct ub_scsi_cmd *cmd,
 static void ub_rw_cmd_done(struct ub_dev *sc, struct ub_scsi_cmd *cmd)
 {
 	struct request *rq = cmd->back;
-	struct gendisk *disk = sc->disk;
+	struct ub_lun *lun = cmd->lun;
+	struct gendisk *disk = lun->disk;
 	request_queue_t *q = disk->queue;
 	int uptodate;
 
@@ -818,7 +864,7 @@ static void ub_rw_cmd_done(struct ub_dev *sc, struct ub_scsi_cmd *cmd)
 	else
 		uptodate = 0;
 
-	ub_put_cmd(sc, cmd);
+	ub_put_cmd(lun, cmd);
 	ub_end_rq(rq, uptodate);
 	blk_start_queue(q);
 }
@@ -887,7 +933,7 @@ static int ub_scsi_cmd_start(struct ub_dev *sc, struct ub_scsi_cmd *cmd)
 	bcb->Tag = cmd->tag;		/* Endianness is not important */
 	bcb->DataTransferLength = cpu_to_le32(cmd->len);
 	bcb->Flags = (cmd->dir == UB_DIR_READ) ? 0x80 : 0;
-	bcb->Lun = 0;			/* No multi-LUN yet */
+	bcb->Lun = (cmd->lun != NULL) ? cmd->lun->num : 0;
 	bcb->Length = cmd->cdb_len;
 
 	/* copy the command payload */
@@ -1002,9 +1048,8 @@ static void ub_scsi_urb_compl(struct ub_dev *sc, struct ub_scsi_cmd *cmd)
 			 * The control pipe clears itself - nothing to do.
 			 * XXX Might try to reset the device here and retry.
 			 */
-			printk(KERN_NOTICE "%s: "
-			    "stall on control pipe for device %u\n",
-			    sc->name, sc->dev->devnum);
+			printk(KERN_NOTICE "%s: stall on control pipe\n",
+			    sc->name);
 			goto Bad_End;
 		}
 
@@ -1025,9 +1070,8 @@ static void ub_scsi_urb_compl(struct ub_dev *sc, struct ub_scsi_cmd *cmd)
 			 * The control pipe clears itself - nothing to do.
 			 * XXX Might try to reset the device here and retry.
 			 */
-			printk(KERN_NOTICE "%s: "
-			    "stall on control pipe for device %u\n",
-			    sc->name, sc->dev->devnum);
+			printk(KERN_NOTICE "%s: stall on control pipe\n",
+			    sc->name);
 			goto Bad_End;
 		}
 
@@ -1046,9 +1090,8 @@ static void ub_scsi_urb_compl(struct ub_dev *sc, struct ub_scsi_cmd *cmd)
 			rc = ub_submit_clear_stall(sc, cmd, sc->last_pipe);
 			if (rc != 0) {
 				printk(KERN_NOTICE "%s: "
-				    "unable to submit clear for device %u"
-				    " (code %d)\n",
-				    sc->name, sc->dev->devnum, rc);
+				    "unable to submit clear (%d)\n",
+				    sc->name, rc);
 				/*
 				 * This is typically ENOMEM or some other such shit.
 				 * Retrying is pointless. Just do Bad End on it...
@@ -1107,9 +1150,8 @@ static void ub_scsi_urb_compl(struct ub_dev *sc, struct ub_scsi_cmd *cmd)
 			rc = ub_submit_clear_stall(sc, cmd, sc->last_pipe);
 			if (rc != 0) {
 				printk(KERN_NOTICE "%s: "
-				    "unable to submit clear for device %u"
-				    " (code %d)\n",
-				    sc->name, sc->dev->devnum, rc);
+				    "unable to submit clear (%d)\n",
+				    sc->name, rc);
 				/*
 				 * This is typically ENOMEM or some other such shit.
 				 * Retrying is pointless. Just do Bad End on it...
@@ -1140,9 +1182,8 @@ static void ub_scsi_urb_compl(struct ub_dev *sc, struct ub_scsi_cmd *cmd)
 			rc = ub_submit_clear_stall(sc, cmd, sc->last_pipe);
 			if (rc != 0) {
 				printk(KERN_NOTICE "%s: "
-				    "unable to submit clear for device %u"
-				    " (code %d)\n",
-				    sc->name, sc->dev->devnum, rc);
+				    "unable to submit clear (%d)\n",
+				    sc->name, rc);
 				/*
 				 * This is typically ENOMEM or some other such shit.
 				 * Retrying is pointless. Just do Bad End on it...
@@ -1164,9 +1205,8 @@ static void ub_scsi_urb_compl(struct ub_dev *sc, struct ub_scsi_cmd *cmd)
 			 * encounter such a thing, try to read the CSW again.
 			 */
 			if (++cmd->stat_count >= 4) {
-				printk(KERN_NOTICE "%s: "
-				    "unable to get CSW on device %u\n",
-				    sc->name, sc->dev->devnum);
+				printk(KERN_NOTICE "%s: unable to get CSW\n",
+				    sc->name);
 				goto Bad_End;
 			}
 			__ub_state_stat(sc, cmd);
@@ -1207,10 +1247,8 @@ static void ub_scsi_urb_compl(struct ub_dev *sc, struct ub_scsi_cmd *cmd)
 			 */
 			if (++cmd->stat_count >= 4) {
 				printk(KERN_NOTICE "%s: "
-				    "tag mismatch orig 0x%x reply 0x%x "
-				    "on device %u\n",
-				    sc->name, cmd->tag, bcs->Tag,
-				    sc->dev->devnum);
+				    "tag mismatch orig 0x%x reply 0x%x\n",
+				    sc->name, cmd->tag, bcs->Tag);
 				goto Bad_End;
 			}
 			__ub_state_stat(sc, cmd);
@@ -1244,8 +1282,8 @@ static void ub_scsi_urb_compl(struct ub_dev *sc, struct ub_scsi_cmd *cmd)
 
 	} else {
 		printk(KERN_WARNING "%s: "
-		    "wrong command state %d on device %u\n",
-		    sc->name, cmd->state, sc->dev->devnum);
+		    "wrong command state %d\n",
+		    sc->name, cmd->state);
 		goto Bad_End;
 	}
 	return;
@@ -1288,7 +1326,6 @@ static void __ub_state_stat(struct ub_dev *sc, struct ub_scsi_cmd *cmd)
 
 	if ((rc = usb_submit_urb(&sc->work_urb, GFP_ATOMIC)) != 0) {
 		/* XXX Clear stalls */
-		printk("%s: CSW #%d submit failed (%d)\n", sc->name, cmd->tag, rc); /* P3 */
 		ub_complete(&sc->work_done);
 		ub_state_done(sc, cmd, rc);
 		return;
@@ -1333,6 +1370,7 @@ static void ub_state_sense(struct ub_dev *sc, struct ub_scsi_cmd *cmd)
 	scmd->state = UB_CMDST_INIT;
 	scmd->data = sc->top_sense;
 	scmd->len = UB_SENSE_SIZE;
+	scmd->lun = cmd->lun;
 	scmd->done = ub_top_sense_done;
 	scmd->back = cmd;
 
@@ -1411,14 +1449,14 @@ static void ub_top_sense_done(struct ub_dev *sc, struct ub_scsi_cmd *scmd)
 	}
 	if (cmd != scmd->back) {
 		printk(KERN_WARNING "%s: "
-		    "sense done for wrong command 0x%x on device %u\n",
-		    sc->name, cmd->tag, sc->dev->devnum);
+		    "sense done for wrong command 0x%x\n",
+		    sc->name, cmd->tag);
 		return;
 	}
 	if (cmd->state != UB_CMDST_SENSE) {
 		printk(KERN_WARNING "%s: "
-		    "sense done with bad cmd state %d on device %u\n",
-		    sc->name, cmd->state, sc->dev->devnum);
+		    "sense done with bad cmd state %d\n",
+		    sc->name, cmd->state);
 		return;
 	}
 
@@ -1429,68 +1467,32 @@ static void ub_top_sense_done(struct ub_dev *sc, struct ub_scsi_cmd *scmd)
 	ub_scsi_urb_compl(sc, cmd);
 }
 
-#if 0
-/* Determine what the maximum LUN supported is */
-int usb_stor_Bulk_max_lun(struct us_data *us)
-{
-	int result;
-
-	/* issue the command */
-	result = usb_stor_control_msg(us, us->recv_ctrl_pipe,
-				 US_BULK_GET_MAX_LUN, 
-				 USB_DIR_IN | USB_TYPE_CLASS | 
-				 USB_RECIP_INTERFACE,
-				 0, us->ifnum, us->iobuf, 1, HZ);
-
-	/* 
-	 * Some devices (i.e. Iomega Zip100) need this -- apparently
-	 * the bulk pipes get STALLed when the GetMaxLUN request is
-	 * processed.   This is, in theory, harmless to all other devices
-	 * (regardless of if they stall or not).
-	 */
-	if (result < 0) {
-		usb_stor_clear_halt(us, us->recv_bulk_pipe);
-		usb_stor_clear_halt(us, us->send_bulk_pipe);
-	}
-
-	US_DEBUGP("GetMaxLUN command result is %d, data is %d\n", 
-		  result, us->iobuf[0]);
-
-	/* if we have a successful request, return the result */
-	if (result == 1)
-		return us->iobuf[0];
-
-	/* return the default -- no LUNs */
-	return 0;
-}
-#endif
-
 /*
  * This is called from a process context.
  */
-static void ub_revalidate(struct ub_dev *sc)
+static void ub_revalidate(struct ub_dev *sc, struct ub_lun *lun)
 {
 
-	sc->readonly = 0;	/* XXX Query this from the device */
+	lun->readonly = 0;	/* XXX Query this from the device */
 
-	sc->capacity.nsec = 0;
-	sc->capacity.bsize = 512;
-	sc->capacity.bshift = 0;
+	lun->capacity.nsec = 0;
+	lun->capacity.bsize = 512;
+	lun->capacity.bshift = 0;
 
-	if (ub_sync_tur(sc) != 0)
+	if (ub_sync_tur(sc, lun) != 0)
 		return;			/* Not ready */
-	sc->changed = 0;
+	lun->changed = 0;
 
-	if (ub_sync_read_cap(sc, &sc->capacity) != 0) {
+	if (ub_sync_read_cap(sc, lun, &lun->capacity) != 0) {
 		/*
 		 * The retry here means something is wrong, either with the
 		 * device, with the transport, or with our code.
 		 * We keep this because sd.c has retries for capacity.
 		 */
-		if (ub_sync_read_cap(sc, &sc->capacity) != 0) {
-			sc->capacity.nsec = 0;
-			sc->capacity.bsize = 512;
-			sc->capacity.bshift = 0;
+		if (ub_sync_read_cap(sc, lun, &lun->capacity) != 0) {
+			lun->capacity.nsec = 0;
+			lun->capacity.bsize = 512;
+			lun->capacity.bshift = 0;
 		}
 	}
 }
@@ -1503,12 +1505,15 @@ static void ub_revalidate(struct ub_dev *sc)
 static int ub_bd_open(struct inode *inode, struct file *filp)
 {
 	struct gendisk *disk = inode->i_bdev->bd_disk;
+	struct ub_lun *lun;
 	struct ub_dev *sc;
 	unsigned long flags;
 	int rc;
 
-	if ((sc = disk->private_data) == NULL)
+	if ((lun = disk->private_data) == NULL)
 		return -ENXIO;
+	sc = lun->udev;
+
 	spin_lock_irqsave(&ub_lock, flags);
 	if (atomic_read(&sc->poison)) {
 		spin_unlock_irqrestore(&ub_lock, flags);
@@ -1529,15 +1534,15 @@ static int ub_bd_open(struct inode *inode, struct file *filp)
 	 * The bottom line is, Al Viro says that we should not allow
 	 * bdev->bd_invalidated to be set when doing add_disk no matter what.
 	 */
-	if (sc->first_open) {
-		if (sc->changed) {
-			sc->first_open = 0;
+	if (lun->first_open) {
+		lun->first_open = 0;
+		if (lun->changed) {
 			rc = -ENOMEDIUM;
 			goto err_open;
 		}
 	}
 
-	if (sc->removable || sc->readonly)
+	if (lun->removable || lun->readonly)
 		check_disk_change(inode->i_bdev);
 
 	/*
@@ -1545,12 +1550,12 @@ static int ub_bd_open(struct inode *inode, struct file *filp)
 	 * under some pretty murky conditions (a failure of READ CAPACITY).
 	 * We may need it one day.
 	 */
-	if (sc->removable && sc->changed && !(filp->f_flags & O_NDELAY)) {
+	if (lun->removable && lun->changed && !(filp->f_flags & O_NDELAY)) {
 		rc = -ENOMEDIUM;
 		goto err_open;
 	}
 
-	if (sc->readonly && (filp->f_mode & FMODE_WRITE)) {
+	if (lun->readonly && (filp->f_mode & FMODE_WRITE)) {
 		rc = -EROFS;
 		goto err_open;
 	}
@@ -1567,7 +1572,8 @@ err_open:
 static int ub_bd_release(struct inode *inode, struct file *filp)
 {
 	struct gendisk *disk = inode->i_bdev->bd_disk;
-	struct ub_dev *sc = disk->private_data;
+	struct ub_lun *lun = disk->private_data;
+	struct ub_dev *sc = lun->udev;
 
 	ub_put(sc);
 	return 0;
@@ -1597,20 +1603,14 @@ static int ub_bd_ioctl(struct inode *inode, struct file *filp,
  */
 static int ub_bd_revalidate(struct gendisk *disk)
 {
-	struct ub_dev *sc = disk->private_data;
-
-	ub_revalidate(sc);
-	/* This is pretty much a long term P3 */
-	if (!atomic_read(&sc->poison)) {		/* Cover sc->dev */
-		printk(KERN_INFO "%s: device %u capacity nsec %ld bsize %u\n",
-		    sc->name, sc->dev->devnum,
-		    sc->capacity.nsec, sc->capacity.bsize);
-	}
+	struct ub_lun *lun = disk->private_data;
+
+	ub_revalidate(lun->udev, lun);
 
 	/* XXX Support sector size switching like in sr.c */
-	blk_queue_hardsect_size(disk->queue, sc->capacity.bsize);
-	set_capacity(disk, sc->capacity.nsec);
-	// set_disk_ro(sdkp->disk, sc->readonly);
+	blk_queue_hardsect_size(disk->queue, lun->capacity.bsize);
+	set_capacity(disk, lun->capacity.nsec);
+	// set_disk_ro(sdkp->disk, lun->readonly);
 
 	return 0;
 }
@@ -1626,9 +1626,9 @@ static int ub_bd_revalidate(struct gendisk *disk)
  */
 static int ub_bd_media_changed(struct gendisk *disk)
 {
-	struct ub_dev *sc = disk->private_data;
+	struct ub_lun *lun = disk->private_data;
 
-	if (!sc->removable)
+	if (!lun->removable)
 		return 0;
 
 	/*
@@ -1640,12 +1640,12 @@ static int ub_bd_media_changed(struct gendisk *disk)
 	 * will fail, then block layer discards the data. Since we never
 	 * spin drives up, such devices simply cannot be used with ub anyway.
 	 */
-	if (ub_sync_tur(sc) != 0) {
-		sc->changed = 1;
+	if (ub_sync_tur(lun->udev, lun) != 0) {
+		lun->changed = 1;
 		return 1;
 	}
 
-	return sc->changed;
+	return lun->changed;
 }
 
 static struct block_device_operations ub_bd_fops = {
@@ -1669,7 +1669,7 @@ static void ub_probe_done(struct ub_dev *sc, struct ub_scsi_cmd *cmd)
 /*
  * Test if the device has a check condition on it, synchronously.
  */
-static int ub_sync_tur(struct ub_dev *sc)
+static int ub_sync_tur(struct ub_dev *sc, struct ub_lun *lun)
 {
 	struct ub_scsi_cmd *cmd;
 	enum { ALLOC_SIZE = sizeof(struct ub_scsi_cmd) };
@@ -1688,6 +1688,7 @@ static int ub_sync_tur(struct ub_dev *sc)
 	cmd->cdb_len = 6;
 	cmd->dir = UB_DIR_NONE;
 	cmd->state = UB_CMDST_INIT;
+	cmd->lun = lun;			/* This may be NULL, but that's ok */
 	cmd->done = ub_probe_done;
 	cmd->back = &compl;
 
@@ -1718,7 +1719,8 @@ err_alloc:
 /*
  * Read the SCSI capacity synchronously (for probing).
  */
-static int ub_sync_read_cap(struct ub_dev *sc, struct ub_capacity *ret)
+static int ub_sync_read_cap(struct ub_dev *sc, struct ub_lun *lun,
+    struct ub_capacity *ret)
 {
 	struct ub_scsi_cmd *cmd;
 	char *p;
@@ -1743,6 +1745,7 @@ static int ub_sync_read_cap(struct ub_dev *sc, struct ub_capacity *ret)
 	cmd->state = UB_CMDST_INIT;
 	cmd->data = p;
 	cmd->len = 8;
+	cmd->lun = lun;
 	cmd->done = ub_probe_done;
 	cmd->back = &compl;
 
@@ -1812,6 +1815,90 @@ static void ub_probe_timeout(unsigned long arg)
 }
 
 /*
+ * Get number of LUNs by the way of Bulk GetMaxLUN command.
+ */
+static int ub_sync_getmaxlun(struct ub_dev *sc)
+{
+	int ifnum = sc->intf->cur_altsetting->desc.bInterfaceNumber;
+	unsigned char *p;
+	enum { ALLOC_SIZE = 1 };
+	struct usb_ctrlrequest *cr;
+	struct completion compl;
+	struct timer_list timer;
+	int nluns;
+	int rc;
+
+	init_completion(&compl);
+
+	rc = -ENOMEM;
+	if ((p = kmalloc(ALLOC_SIZE, GFP_KERNEL)) == NULL)
+		goto err_alloc;
+	*p = 55;
+
+	cr = &sc->work_cr;
+	cr->bRequestType = USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_INTERFACE;
+	cr->bRequest = US_BULK_GET_MAX_LUN;
+	cr->wValue = cpu_to_le16(0);
+	cr->wIndex = cpu_to_le16(ifnum);
+	cr->wLength = cpu_to_le16(1);
+
+	usb_fill_control_urb(&sc->work_urb, sc->dev, sc->recv_ctrl_pipe,
+	    (unsigned char*) cr, p, 1, ub_probe_urb_complete, &compl);
+	sc->work_urb.transfer_flags = 0;
+	sc->work_urb.actual_length = 0;
+	sc->work_urb.error_count = 0;
+	sc->work_urb.status = 0;
+
+	if ((rc = usb_submit_urb(&sc->work_urb, GFP_KERNEL)) != 0) {
+		if (rc == -EPIPE) {
+			printk("%s: Stall at GetMaxLUN, using 1 LUN\n",
+			     sc->name); /* P3 */
+		} else {
+			printk(KERN_WARNING
+			     "%s: Unable to submit GetMaxLUN (%d)\n",
+			     sc->name, rc);
+		}
+		goto err_submit;
+	}
+
+	init_timer(&timer);
+	timer.function = ub_probe_timeout;
+	timer.data = (unsigned long) &compl;
+	timer.expires = jiffies + UB_CTRL_TIMEOUT;
+	add_timer(&timer);
+
+	wait_for_completion(&compl);
+
+	del_timer_sync(&timer);
+	usb_kill_urb(&sc->work_urb);
+
+	if (sc->work_urb.actual_length != 1) {
+		printk("%s: GetMaxLUN returned %d bytes\n", sc->name,
+		    sc->work_urb.actual_length); /* P3 */
+		nluns = 0;
+	} else {
+		if ((nluns = *p) == 55) {
+			nluns = 0;
+		} else {
+  			/* GetMaxLUN returns the maximum LUN number */
+			nluns += 1;
+			if (nluns > UB_MAX_LUNS)
+				nluns = UB_MAX_LUNS;
+		}
+		printk("%s: GetMaxLUN returned %d, using %d LUNs\n", sc->name,
+		    *p, nluns); /* P3 */
+	}
+
+	kfree(p);
+	return nluns;
+
+err_submit:
+	kfree(p);
+err_alloc:
+	return rc;
+}
+
+/*
  * Clear initial stalls.
  */
 static int ub_probe_clear_stall(struct ub_dev *sc, int stalled_pipe)
@@ -1897,8 +1984,8 @@ static int ub_get_pipes(struct ub_dev *sc, struct usb_device *dev,
 	}
 
 	if (ep_in == NULL || ep_out == NULL) {
-		printk(KERN_NOTICE "%s: device %u failed endpoint check\n",
-		    sc->name, sc->dev->devnum);
+		printk(KERN_NOTICE "%s: failed endpoint check\n",
+		    sc->name);
 		return -EIO;
 	}
 
@@ -1921,8 +2008,7 @@ static int ub_probe(struct usb_interface *intf,
     const struct usb_device_id *dev_id)
 {
 	struct ub_dev *sc;
-	request_queue_t *q;
-	struct gendisk *disk;
+	int nluns;
 	int rc;
 	int i;
 
@@ -1931,6 +2017,7 @@ static int ub_probe(struct usb_interface *intf,
 		goto err_core;
 	memset(sc, 0, sizeof(struct ub_dev));
 	spin_lock_init(&sc->lock);
+	INIT_LIST_HEAD(&sc->luns);
 	usb_init_urb(&sc->work_urb);
 	tasklet_init(&sc->tasklet, ub_scsi_action, (unsigned long)sc);
 	atomic_set(&sc->poison, 0);
@@ -1942,19 +2029,16 @@ static int ub_probe(struct usb_interface *intf,
 	ub_init_completion(&sc->work_done);
 	sc->work_done.done = 1;		/* A little yuk, but oh well... */
 
-	rc = -ENOSR;
-	if ((sc->id = ub_id_get()) == -1)
-		goto err_id;
-	snprintf(sc->name, 8, DRV_NAME "%c", sc->id + 'a');
-
 	sc->dev = interface_to_usbdev(intf);
 	sc->intf = intf;
 	// sc->ifnum = intf->cur_altsetting->desc.bInterfaceNumber;
-
 	usb_set_intfdata(intf, sc);
 	usb_get_dev(sc->dev);
 	// usb_get_intf(sc->intf);	/* Do we need this? */
 
+	snprintf(sc->name, 12, DRV_NAME "(%d.%d)",
+	    sc->dev->bus->busnum, sc->dev->devnum);
+
 	/* XXX Verify that we can handle the device (from descriptors) */
 
 	ub_get_pipes(sc, sc->dev, intf);
@@ -1992,35 +2076,88 @@ static int ub_probe(struct usb_interface *intf,
 	 * In any case it's not our business how revaliadation is implemented.
 	 */
 	for (i = 0; i < 3; i++) {	/* Retries for benh's key */
-		if ((rc = ub_sync_tur(sc)) <= 0) break;
+		if ((rc = ub_sync_tur(sc, NULL)) <= 0) break;
 		if (rc != 0x6) break;
 		msleep(10);
 	}
 
-	sc->removable = 1;		/* XXX Query this from the device */
-	sc->changed = 1;		/* ub_revalidate clears only */
-	sc->first_open = 1;
+	nluns = 1;
+	for (i = 0; i < 3; i++) {
+		if ((rc = ub_sync_getmaxlun(sc)) < 0) {
+			/* 
+			 * Some devices (i.e. Iomega Zip100) need this --
+			 * apparently the bulk pipes get STALLed when the
+			 * GetMaxLUN request is processed.
+			 * XXX I have a ZIP-100, verify it does this.
+			 */
+			if (rc == -EPIPE) {
+				ub_probe_clear_stall(sc, sc->recv_bulk_pipe);
+				ub_probe_clear_stall(sc, sc->send_bulk_pipe);
+			}
+			break;
+		}
+		if (rc != 0) {
+			nluns = rc;
+			break;
+		}
+		mdelay(100);
+	}
 
-	ub_revalidate(sc);
-	/* This is pretty much a long term P3 */
-	printk(KERN_INFO "%s: device %u capacity nsec %ld bsize %u\n",
-	    sc->name, sc->dev->devnum, sc->capacity.nsec, sc->capacity.bsize);
+	for (i = 0; i < nluns; i++) {
+		ub_probe_lun(sc, i);
+	}
+	return 0;
+
+	/* device_remove_file(&sc->intf->dev, &dev_attr_diag); */
+err_diag:
+	usb_set_intfdata(intf, NULL);
+	// usb_put_intf(sc->intf);
+	usb_put_dev(sc->dev);
+	kfree(sc);
+err_core:
+	return rc;
+}
+
+static int ub_probe_lun(struct ub_dev *sc, int lnum)
+{
+	struct ub_lun *lun;
+	request_queue_t *q;
+	struct gendisk *disk;
+	int rc;
+
+	rc = -ENOMEM;
+	if ((lun = kmalloc(sizeof(struct ub_lun), GFP_KERNEL)) == NULL)
+		goto err_alloc;
+	memset(lun, 0, sizeof(struct ub_lun));
+	lun->num = lnum;
+
+	rc = -ENOSR;
+	if ((lun->id = ub_id_get()) == -1)
+		goto err_id;
+
+	lun->udev = sc;
+	list_add(&lun->link, &sc->luns);
+
+	snprintf(lun->name, 16, DRV_NAME "%c(%d.%d.%d)",
+	    lun->id + 'a', sc->dev->bus->busnum, sc->dev->devnum, lun->num);
+
+	lun->removable = 1;		/* XXX Query this from the device */
+	lun->changed = 1;		/* ub_revalidate clears only */
+	lun->first_open = 1;
+	ub_revalidate(sc, lun);
 
-	/*
-	 * Just one disk per sc currently, but maybe more.
-	 */
 	rc = -ENOMEM;
 	if ((disk = alloc_disk(UB_MINORS_PER_MAJOR)) == NULL)
 		goto err_diskalloc;
 
-	sc->disk = disk;
-	sprintf(disk->disk_name, DRV_NAME "%c", sc->id + 'a');
-	sprintf(disk->devfs_name, DEVFS_NAME "/%c", sc->id + 'a');
+	lun->disk = disk;
+	sprintf(disk->disk_name, DRV_NAME "%c", lun->id + 'a');
+	sprintf(disk->devfs_name, DEVFS_NAME "/%c", lun->id + 'a');
 	disk->major = UB_MAJOR;
-	disk->first_minor = sc->id * UB_MINORS_PER_MAJOR;
+	disk->first_minor = lun->id * UB_MINORS_PER_MAJOR;
 	disk->fops = &ub_bd_fops;
-	disk->private_data = sc;
-	disk->driverfs_dev = &intf->dev;
+	disk->private_data = lun;
+	disk->driverfs_dev = &sc->intf->dev;	/* XXX Many to one ok? */
 
 	rc = -ENOMEM;
 	if ((q = blk_init_queue(ub_bd_rq_fn, &sc->lock)) == NULL)
@@ -2028,28 +2165,17 @@ static int ub_probe(struct usb_interface *intf,
 
 	disk->queue = q;
 
-        // blk_queue_bounce_limit(q, hba[i]->pdev->dma_mask);
+	blk_queue_bounce_limit(q, BLK_BOUNCE_HIGH);
 	blk_queue_max_hw_segments(q, UB_MAX_REQ_SG);
 	blk_queue_max_phys_segments(q, UB_MAX_REQ_SG);
-	// blk_queue_segment_boundary(q, CARM_SG_BOUNDARY);
+	blk_queue_segment_boundary(q, 0xffffffff);	/* Dubious. */
 	blk_queue_max_sectors(q, UB_MAX_SECTORS);
-	blk_queue_hardsect_size(q, sc->capacity.bsize);
-
-	/*
-	 * This is a serious infraction, caused by a deficiency in the
-	 * USB sg interface (usb_sg_wait()). We plan to remove this once
-	 * we get mileage on the driver and can justify a change to USB API.
-	 * See blk_queue_bounce_limit() to understand this part.
-	 *
-	 * XXX And I still need to be aware of the DMA mask in the HC.
-	 */
-	q->bounce_pfn = blk_max_low_pfn;
-	q->bounce_gfp = GFP_NOIO;
+	blk_queue_hardsect_size(q, lun->capacity.bsize);
 
-	q->queuedata = sc;
+	q->queuedata = lun;
 
-	set_capacity(disk, sc->capacity.nsec);
-	if (sc->removable)
+	set_capacity(disk, lun->capacity.nsec);
+	if (lun->removable)
 		disk->flags |= GENHD_FL_REMOVABLE;
 
 	add_disk(disk);
@@ -2059,22 +2185,20 @@ static int ub_probe(struct usb_interface *intf,
 err_blkqinit:
 	put_disk(disk);
 err_diskalloc:
-	device_remove_file(&sc->intf->dev, &dev_attr_diag);
-err_diag:
-	usb_set_intfdata(intf, NULL);
-	// usb_put_intf(sc->intf);
-	usb_put_dev(sc->dev);
-	ub_id_put(sc->id);
+	list_del(&lun->link);
+	ub_id_put(lun->id);
 err_id:
-	kfree(sc);
-err_core:
+	kfree(lun);
+err_alloc:
 	return rc;
 }
 
 static void ub_disconnect(struct usb_interface *intf)
 {
 	struct ub_dev *sc = usb_get_intfdata(intf);
-	struct gendisk *disk = sc->disk;
+	struct list_head *p;
+	struct ub_lun *lun;
+	struct gendisk *disk;
 	unsigned long flags;
 
 	/*
@@ -2124,14 +2248,18 @@ static void ub_disconnect(struct usb_interface *intf)
 	/*
 	 * Unregister the upper layer.
 	 */
-	if (disk->flags & GENHD_FL_UP)
-		del_gendisk(disk);
-	/*
-	 * I wish I could do:
-	 *    set_bit(QUEUE_FLAG_DEAD, &q->queue_flags);
-	 * As it is, we rely on our internal poisoning and let
-	 * the upper levels to spin furiously failing all the I/O.
-	 */
+	list_for_each (p, &sc->luns) {
+		lun = list_entry(p, struct ub_lun, link);
+		disk = lun->disk;
+		if (disk->flags & GENHD_FL_UP)
+			del_gendisk(disk);
+		/*
+		 * I wish I could do:
+		 *    set_bit(QUEUE_FLAG_DEAD, &q->queue_flags);
+		 * As it is, we rely on our internal poisoning and let
+		 * the upper levels to spin furiously failing all the I/O.
+		 */
+	}
 
 	/*
 	 * Taking a lock on a structure which is about to be freed
@@ -2182,8 +2310,8 @@ static int __init ub_init(void)
 {
 	int rc;
 
-	/* P3 */ printk("ub: sizeof ub_scsi_cmd %zu ub_dev %zu\n",
-			sizeof(struct ub_scsi_cmd), sizeof(struct ub_dev));
+	/* P3 */ printk("ub: sizeof ub_scsi_cmd %zu ub_dev %zu ub_lun %zu\n",
+			sizeof(struct ub_scsi_cmd), sizeof(struct ub_dev), sizeof(struct ub_lun));
 
 	if ((rc = register_blkdev(UB_MAJOR, DRV_NAME)) != 0)
 		goto err_regblkdev;
diff --git a/drivers/i2c/busses/i2c-ali1563.c b/drivers/i2c/busses/i2c-ali1563.c
index 35710818fe47..fdd881aee618 100644
--- a/drivers/i2c/busses/i2c-ali1563.c
+++ b/drivers/i2c/busses/i2c-ali1563.c
@@ -2,6 +2,7 @@
  *	i2c-ali1563.c - i2c driver for the ALi 1563 Southbridge
  *
  *	Copyright (C) 2004 Patrick Mochel
+ *		      2005 Rudolf Marek <r.marek@sh.cvut.cz>
  *
  *	The 1563 southbridge is deceptively similar to the 1533, with a
  *	few notable exceptions. One of those happens to be the fact they
@@ -57,10 +58,11 @@
 #define HST_CNTL2_BLOCK		0x05
 
 
+#define HST_CNTL2_SIZEMASK	0x38
 
 static unsigned short ali1563_smba;
 
-static int ali1563_transaction(struct i2c_adapter * a)
+static int ali1563_transaction(struct i2c_adapter * a, int size)
 {
 	u32 data;
 	int timeout;
@@ -73,7 +75,7 @@ static int ali1563_transaction(struct i2c_adapter * a)
 
 	data = inb_p(SMB_HST_STS);
 	if (data & HST_STS_BAD) {
-		dev_warn(&a->dev,"ali1563: Trying to reset busy device\n");
+		dev_err(&a->dev, "ali1563: Trying to reset busy device\n");
 		outb_p(data | HST_STS_BAD,SMB_HST_STS);
 		data = inb_p(SMB_HST_STS);
 		if (data & HST_STS_BAD)
@@ -94,19 +96,31 @@ static int ali1563_transaction(struct i2c_adapter * a)
 
 	if (timeout && !(data & HST_STS_BAD))
 		return 0;
-	dev_warn(&a->dev, "SMBus Error: %s%s%s%s%s\n",
-		timeout ? "Timeout " : "",
-		data & HST_STS_FAIL ? "Transaction Failed " : "",
-		data & HST_STS_BUSERR ? "No response or Bus Collision " : "",
-		data & HST_STS_DEVERR ? "Device Error " : "",
-		!(data & HST_STS_DONE) ? "Transaction Never Finished " : "");
 
-	if (!(data & HST_STS_DONE))
+	if (!timeout) {
+		dev_err(&a->dev, "Timeout - Trying to KILL transaction!\n");
 		/* Issue 'kill' to host controller */
 		outb_p(HST_CNTL2_KILL,SMB_HST_CNTL2);
-	else
-		/* Issue timeout to reset all devices on bus */
+		data = inb_p(SMB_HST_STS);
+ 	}
+
+	/* device error - no response, ignore the autodetection case */
+	if ((data & HST_STS_DEVERR) && (size != HST_CNTL2_QUICK)) {
+		dev_err(&a->dev, "Device error!\n");
+	}
+
+	/* bus collision */
+	if (data & HST_STS_BUSERR) {
+		dev_err(&a->dev, "Bus collision!\n");
+		/* Issue timeout, hoping it helps */
 		outb_p(HST_CNTL1_TIMEOUT,SMB_HST_CNTL1);
+	}
+
+	if (data & HST_STS_FAIL) {
+		dev_err(&a->dev, "Cleaning fail after KILL!\n");
+		outb_p(0x0,SMB_HST_CNTL2);
+	}
+
 	return -1;
 }
 
@@ -149,7 +163,7 @@ static int ali1563_block_start(struct i2c_adapter * a)
 
 	if (timeout && !(data & HST_STS_BAD))
 		return 0;
-	dev_warn(&a->dev, "SMBus Error: %s%s%s%s%s\n",
+	dev_err(&a->dev, "SMBus Error: %s%s%s%s%s\n",
 		timeout ? "Timeout " : "",
 		data & HST_STS_FAIL ? "Transaction Failed " : "",
 		data & HST_STS_BUSERR ? "No response or Bus Collision " : "",
@@ -242,13 +256,15 @@ static s32 ali1563_access(struct i2c_adapter * a, u16 addr,
 	}
 
 	outb_p(((addr & 0x7f) << 1) | (rw & 0x01), SMB_HST_ADD);
-	outb_p(inb_p(SMB_HST_CNTL2) | (size << 3), SMB_HST_CNTL2);
+	outb_p((inb_p(SMB_HST_CNTL2) & ~HST_CNTL2_SIZEMASK) | (size << 3), SMB_HST_CNTL2);
 
 	/* Write the command register */
+
 	switch(size) {
 	case HST_CNTL2_BYTE:
 		if (rw== I2C_SMBUS_WRITE)
-			outb_p(cmd, SMB_HST_CMD);
+			/* Beware it uses DAT0 register and not CMD! */
+			outb_p(cmd, SMB_HST_DAT0);
 		break;
 	case HST_CNTL2_BYTE_DATA:
 		outb_p(cmd, SMB_HST_CMD);
@@ -268,7 +284,7 @@ static s32 ali1563_access(struct i2c_adapter * a, u16 addr,
 		goto Done;
 	}
 
-	if ((error = ali1563_transaction(a)))
+	if ((error = ali1563_transaction(a, size)))
 		goto Done;
 
 	if ((rw == I2C_SMBUS_WRITE) || (size == HST_CNTL2_QUICK))
diff --git a/drivers/ide/pci/amd74xx.c b/drivers/ide/pci/amd74xx.c
index 47225e324356..4e0f13d1d060 100644
--- a/drivers/ide/pci/amd74xx.c
+++ b/drivers/ide/pci/amd74xx.c
@@ -72,6 +72,7 @@ static struct amd_ide_chip {
 	{ PCI_DEVICE_ID_NVIDIA_NFORCE3S_SATA2,	0x50, AMD_UDMA_133 },
 	{ PCI_DEVICE_ID_NVIDIA_NFORCE_CK804_IDE,	0x50, AMD_UDMA_133 },
 	{ PCI_DEVICE_ID_NVIDIA_NFORCE_MCP04_IDE,	0x50, AMD_UDMA_133 },
+	{ PCI_DEVICE_ID_NVIDIA_NFORCE_MCP51_IDE,	0x50, AMD_UDMA_133 },
 	{ 0 }
 };
 
@@ -487,6 +488,7 @@ static ide_pci_device_t amd74xx_chipsets[] __devinitdata = {
 	/* 12 */ DECLARE_NV_DEV("NFORCE3-250-SATA2"),
 	/* 13 */ DECLARE_NV_DEV("NFORCE-CK804"),
 	/* 14 */ DECLARE_NV_DEV("NFORCE-MCP04"),
+	/* 15 */ DECLARE_NV_DEV("NFORCE-MCP51"),
 };
 
 static int __devinit amd74xx_probe(struct pci_dev *dev, const struct pci_device_id *id)
@@ -521,6 +523,7 @@ static struct pci_device_id amd74xx_pci_tbl[] = {
 #endif
 	{ PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_CK804_IDE,	PCI_ANY_ID, PCI_ANY_ID, 0, 0, 13 },
 	{ PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP04_IDE,	PCI_ANY_ID, PCI_ANY_ID, 0, 0, 14 },
+	{ PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP51_IDE,	PCI_ANY_ID, PCI_ANY_ID, 0, 0, 15 },
 	{ 0, },
 };
 MODULE_DEVICE_TABLE(pci, amd74xx_pci_tbl);
diff --git a/drivers/net/hamradio/baycom_epp.c b/drivers/net/hamradio/baycom_epp.c
index 1c563f905a59..a7f15d9f13e5 100644
--- a/drivers/net/hamradio/baycom_epp.c
+++ b/drivers/net/hamradio/baycom_epp.c
@@ -374,29 +374,6 @@ static inline void do_kiss_params(struct baycom_state *bc,
 }
 
 /* --------------------------------------------------------------------- */
-/*
- * high performance HDLC encoder
- * yes, it's ugly, but generates pretty good code
- */
-
-#define ENCODEITERA(j)                         \
-({                                             \
-        if (!(notbitstream & (0x1f0 << j)))    \
-                goto stuff##j;                 \
-  encodeend##j:    	;                      \
-})
-
-#define ENCODEITERB(j)                                          \
-({                                                              \
-  stuff##j:                                                     \
-        bitstream &= ~(0x100 << j);                             \
-        bitbuf = (bitbuf & (((2 << j) << numbit) - 1)) |        \
-                ((bitbuf & ~(((2 << j) << numbit) - 1)) << 1);  \
-        numbit++;                                               \
-        notbitstream = ~bitstream;                              \
-        goto encodeend##j;                                      \
-})
-
 
 static void encode_hdlc(struct baycom_state *bc)
 {
@@ -405,6 +382,7 @@ static void encode_hdlc(struct baycom_state *bc)
 	int pkt_len;
         unsigned bitstream, notbitstream, bitbuf, numbit, crc;
 	unsigned char crcarr[2];
+	int j;
 	
 	if (bc->hdlctx.bufcnt > 0)
 		return;
@@ -429,24 +407,14 @@ static void encode_hdlc(struct baycom_state *bc)
 		pkt_len--;
 		if (!pkt_len)
 			bp = crcarr;
-		ENCODEITERA(0);
-		ENCODEITERA(1);
-		ENCODEITERA(2);
-		ENCODEITERA(3);
-		ENCODEITERA(4);
-		ENCODEITERA(5);
-		ENCODEITERA(6);
-		ENCODEITERA(7);
-		goto enditer;
-		ENCODEITERB(0);
-		ENCODEITERB(1);
-		ENCODEITERB(2);
-		ENCODEITERB(3);
-		ENCODEITERB(4);
-		ENCODEITERB(5);
-		ENCODEITERB(6);
-		ENCODEITERB(7);
-	enditer:
+		for (j = 0; j < 8; j++)
+			if (unlikely(!(notbitstream & (0x1f0 << j)))) {
+				bitstream &= ~(0x100 << j);
+ 				bitbuf = (bitbuf & (((2 << j) << numbit) - 1)) |
+					((bitbuf & ~(((2 << j) << numbit) - 1)) << 1);
+				numbit++;
+				notbitstream = ~bitstream;
+			}
 		numbit += 8;
 		while (numbit >= 8) {
 			*wp++ = bitbuf;
@@ -610,37 +578,6 @@ static void do_rxpacket(struct net_device *dev)
 	bc->stats.rx_packets++;
 }
 
-#define DECODEITERA(j)                                                        \
-({                                                                            \
-        if (!(notbitstream & (0x0fc << j)))              /* flag or abort */  \
-                goto flgabrt##j;                                              \
-        if ((bitstream & (0x1f8 << j)) == (0xf8 << j))   /* stuffed bit */    \
-                goto stuff##j;                                                \
-  enditer##j:      ;                                                           \
-})
-
-#define DECODEITERB(j)                                                                 \
-({                                                                                     \
-  flgabrt##j:                                                                          \
-        if (!(notbitstream & (0x1fc << j))) {              /* abort received */        \
-                state = 0;                                                             \
-                goto enditer##j;                                                       \
-        }                                                                              \
-        if ((bitstream & (0x1fe << j)) != (0x0fc << j))   /* flag received */          \
-                goto enditer##j;                                                       \
-        if (state)                                                                     \
-                do_rxpacket(dev);                                                      \
-        bc->hdlcrx.bufcnt = 0;                                                         \
-        bc->hdlcrx.bufptr = bc->hdlcrx.buf;                                            \
-        state = 1;                                                                     \
-        numbits = 7-j;                                                                 \
-        goto enditer##j;                                                               \
-  stuff##j:                                                                            \
-        numbits--;                                                                     \
-        bitbuf = (bitbuf & ((~0xff) << j)) | ((bitbuf & ~((~0xff) << j)) << 1);        \
-        goto enditer##j;                                                               \
-})
-        
 static int receive(struct net_device *dev, int cnt)
 {
 	struct baycom_state *bc = netdev_priv(dev);
@@ -649,6 +586,7 @@ static int receive(struct net_device *dev, int cnt)
 	unsigned char tmp[128];
         unsigned char *cp;
 	int cnt2, ret = 0;
+	int j;
         
         numbits = bc->hdlcrx.numbits;
 	state = bc->hdlcrx.state;
@@ -669,24 +607,32 @@ static int receive(struct net_device *dev, int cnt)
 			bitbuf |= (*cp) << 8;
 			numbits += 8;
 			notbitstream = ~bitstream;
-			DECODEITERA(0);
-			DECODEITERA(1);
-			DECODEITERA(2);
-			DECODEITERA(3);
-			DECODEITERA(4);
-			DECODEITERA(5);
-			DECODEITERA(6);
-			DECODEITERA(7);
-			goto enddec;
-			DECODEITERB(0);
-			DECODEITERB(1);
-			DECODEITERB(2);
-			DECODEITERB(3);
-			DECODEITERB(4);
-			DECODEITERB(5);
-			DECODEITERB(6);
-			DECODEITERB(7);
-		enddec:
+			for (j = 0; j < 8; j++) {
+
+				/* flag or abort */
+			        if (unlikely(!(notbitstream & (0x0fc << j)))) {
+
+					/* abort received */
+					if (!(notbitstream & (0x1fc << j)))
+						state = 0;
+
+					/* not flag received */
+					else if (!(bitstream & (0x1fe << j)) != (0x0fc << j)) {
+						if (state)
+							do_rxpacket(dev);
+						bc->hdlcrx.bufcnt = 0;
+						bc->hdlcrx.bufptr = bc->hdlcrx.buf;
+						state = 1;
+						numbits = 7-j;
+						}
+					}
+
+				/* stuffed bit */
+				else if (unlikely((bitstream & (0x1f8 << j)) == (0xf8 << j))) {
+					numbits--;
+					bitbuf = (bitbuf & ((~0xff) << j)) | ((bitbuf & ~((~0xff) << j)) << 1);
+					}
+				}
 			while (state && numbits >= 8) {
 				if (bc->hdlcrx.bufcnt >= TXBUFFER_SIZE) {
 					state = 0;
diff --git a/drivers/net/pcmcia/3c574_cs.c b/drivers/net/pcmcia/3c574_cs.c
index 41e517114807..c6e8b25f9685 100644
--- a/drivers/net/pcmcia/3c574_cs.c
+++ b/drivers/net/pcmcia/3c574_cs.c
@@ -1274,6 +1274,9 @@ static int el3_close(struct net_device *dev)
 		spin_lock_irqsave(&lp->window_lock, flags);
 		update_stats(dev);
 		spin_unlock_irqrestore(&lp->window_lock, flags);
+
+		/* force interrupts off */
+		outw(SetIntrEnb | 0x0000, ioaddr + EL3_CMD);
 	}
 
 	link->open--;
diff --git a/drivers/net/r8169.c b/drivers/net/r8169.c
index c59507f8a76b..b3768d844747 100644
--- a/drivers/net/r8169.c
+++ b/drivers/net/r8169.c
@@ -1585,8 +1585,8 @@ rtl8169_hw_start(struct net_device *dev)
 	RTL_W8(ChipCmd, CmdTxEnb | CmdRxEnb);
 	RTL_W8(EarlyTxThres, EarlyTxThld);
 
-	/* For gigabit rtl8169, MTU + header + CRC + VLAN */
-	RTL_W16(RxMaxSize, tp->rx_buf_sz);
+	/* Low hurts. Let's disable the filtering. */
+	RTL_W16(RxMaxSize, 16383);
 
 	/* Set Rx Config register */
 	i = rtl8169_rx_config |
@@ -2127,6 +2127,11 @@ rtl8169_tx_interrupt(struct net_device *dev, struct rtl8169_private *tp,
 	}
 }
 
+static inline int rtl8169_fragmented_frame(u32 status)
+{
+	return (status & (FirstFrag | LastFrag)) != (FirstFrag | LastFrag);
+}
+
 static inline void rtl8169_rx_csum(struct sk_buff *skb, struct RxDesc *desc)
 {
 	u32 opts1 = le32_to_cpu(desc->opts1);
@@ -2177,27 +2182,41 @@ rtl8169_rx_interrupt(struct net_device *dev, struct rtl8169_private *tp,
 
 	while (rx_left > 0) {
 		unsigned int entry = cur_rx % NUM_RX_DESC;
+		struct RxDesc *desc = tp->RxDescArray + entry;
 		u32 status;
 
 		rmb();
-		status = le32_to_cpu(tp->RxDescArray[entry].opts1);
+		status = le32_to_cpu(desc->opts1);
 
 		if (status & DescOwn)
 			break;
 		if (status & RxRES) {
-			printk(KERN_INFO "%s: Rx ERROR!!!\n", dev->name);
+			printk(KERN_INFO "%s: Rx ERROR. status = %08x\n",
+			       dev->name, status);
 			tp->stats.rx_errors++;
 			if (status & (RxRWT | RxRUNT))
 				tp->stats.rx_length_errors++;
 			if (status & RxCRC)
 				tp->stats.rx_crc_errors++;
+			rtl8169_mark_to_asic(desc, tp->rx_buf_sz);
 		} else {
-			struct RxDesc *desc = tp->RxDescArray + entry;
 			struct sk_buff *skb = tp->Rx_skbuff[entry];
 			int pkt_size = (status & 0x00001FFF) - 4;
 			void (*pci_action)(struct pci_dev *, dma_addr_t,
 				size_t, int) = pci_dma_sync_single_for_device;
 
+			/*
+			 * The driver does not support incoming fragmented
+			 * frames. They are seen as a symptom of over-mtu
+			 * sized frames.
+			 */
+			if (unlikely(rtl8169_fragmented_frame(status))) {
+				tp->stats.rx_dropped++;
+				tp->stats.rx_length_errors++;
+				rtl8169_mark_to_asic(desc, tp->rx_buf_sz);
+				goto move_on;
+			}
+
 			rtl8169_rx_csum(skb, desc);
 			
 			pci_dma_sync_single_for_cpu(tp->pci_dev,
@@ -2224,7 +2243,7 @@ rtl8169_rx_interrupt(struct net_device *dev, struct rtl8169_private *tp,
 			tp->stats.rx_bytes += pkt_size;
 			tp->stats.rx_packets++;
 		}
-		
+move_on:		
 		cur_rx++; 
 		rx_left--;
 	}
diff --git a/drivers/net/shaper.c b/drivers/net/shaper.c
index e68cf5fb4920..20edeb345792 100644
--- a/drivers/net/shaper.c
+++ b/drivers/net/shaper.c
@@ -100,35 +100,8 @@ static int sh_debug;		/* Debug flag */
 
 #define SHAPER_BANNER	"CymruNet Traffic Shaper BETA 0.04 for Linux 2.1\n"
 
-/*
- *	Locking
- */
- 
-static int shaper_lock(struct shaper *sh)
-{
-	/*
-	 *	Lock in an interrupt must fail
-	 */
-	while (test_and_set_bit(0, &sh->locked))
-	{
-		if (!in_interrupt())
-			sleep_on(&sh->wait_queue);
-		else
-			return 0;
-			
-	}
-	return 1;
-}
-
 static void shaper_kick(struct shaper *sh);
 
-static void shaper_unlock(struct shaper *sh)
-{
-	clear_bit(0, &sh->locked);
-	wake_up(&sh->wait_queue);
-	shaper_kick(sh);
-}
-
 /*
  *	Compute clocks on a buffer
  */
@@ -157,17 +130,15 @@ static void shaper_setspeed(struct shaper *shaper, int bitspersec)
  *	Throw a frame at a shaper.
  */
   
-static int shaper_qframe(struct shaper *shaper, struct sk_buff *skb)
+
+static int shaper_start_xmit(struct sk_buff *skb, struct net_device *dev)
 {
+	struct shaper *shaper = dev->priv;
  	struct sk_buff *ptr;
    
- 	/*
- 	 *	Get ready to work on this shaper. Lock may fail if its
- 	 *	an interrupt and locked.
- 	 */
- 	 
- 	if(!shaper_lock(shaper))
- 		return -1;
+	if (down_trylock(&shaper->sem))
+		return -1;
+
  	ptr=shaper->sendq.prev;
  	
  	/*
@@ -260,7 +231,8 @@ static int shaper_qframe(struct shaper *shaper, struct sk_buff *skb)
                 dev_kfree_skb(ptr);
                 shaper->stats.collisions++;
  	}
- 	shaper_unlock(shaper);
+	shaper_kick(shaper);
+	up(&shaper->sem);
  	return 0;
 }
 
@@ -297,8 +269,13 @@ static void shaper_queue_xmit(struct shaper *shaper, struct sk_buff *skb)
  
 static void shaper_timer(unsigned long data)
 {
-	struct shaper *sh=(struct shaper *)data;
-	shaper_kick(sh);
+	struct shaper *shaper = (struct shaper *)data;
+
+	if (!down_trylock(&shaper->sem)) {
+		shaper_kick(shaper);
+		up(&shaper->sem);
+	} else
+		mod_timer(&shaper->timer, jiffies);
 }
 
 /*
@@ -311,19 +288,6 @@ static void shaper_kick(struct shaper *shaper)
 	struct sk_buff *skb;
 	
 	/*
-	 *	Shaper unlock will kick
-	 */
-	 
-	if (test_and_set_bit(0, &shaper->locked))
-	{
-		if(sh_debug)
-			printk("Shaper locked.\n");
-		mod_timer(&shaper->timer, jiffies);
-		return;
-	}
-
-		
-	/*
 	 *	Walk the list (may be empty)
 	 */
 	 
@@ -364,8 +328,6 @@ static void shaper_kick(struct shaper *shaper)
 	 
 	if(skb!=NULL)
 		mod_timer(&shaper->timer, SHAPERCB(skb)->shapeclock);
-
-	clear_bit(0, &shaper->locked);
 }
 
 
@@ -376,14 +338,12 @@ static void shaper_kick(struct shaper *shaper)
 static void shaper_flush(struct shaper *shaper)
 {
 	struct sk_buff *skb;
- 	if(!shaper_lock(shaper))
-	{
-		printk(KERN_ERR "shaper: shaper_flush() called by an irq!\n");
- 		return;
-	}
+
+	down(&shaper->sem);
 	while((skb=skb_dequeue(&shaper->sendq))!=NULL)
 		dev_kfree_skb(skb);
-	shaper_unlock(shaper);
+	shaper_kick(shaper);
+	up(&shaper->sem);
 }
 
 /*
@@ -426,13 +386,6 @@ static int shaper_close(struct net_device *dev)
  *	ARP and other resolutions and not before.
  */
 
-
-static int shaper_start_xmit(struct sk_buff *skb, struct net_device *dev)
-{
-	struct shaper *sh=dev->priv;
-	return shaper_qframe(sh, skb);
-}
-
 static struct net_device_stats *shaper_get_stats(struct net_device *dev)
 {
      	struct shaper *sh=dev->priv;
@@ -623,7 +576,6 @@ static void shaper_init_priv(struct net_device *dev)
 	init_timer(&sh->timer);
 	sh->timer.function=shaper_timer;
 	sh->timer.data=(unsigned long)sh;
-	init_waitqueue_head(&sh->wait_queue);
 }
 
 /*
diff --git a/drivers/pci/hotplug/cpci_hotplug_core.c b/drivers/pci/hotplug/cpci_hotplug_core.c
index 9e9dab7fe86a..8132d946c384 100644
--- a/drivers/pci/hotplug/cpci_hotplug_core.c
+++ b/drivers/pci/hotplug/cpci_hotplug_core.c
@@ -1,7 +1,7 @@
 /*
  * CompactPCI Hot Plug Driver
  *
- * Copyright (C) 2002 SOMA Networks, Inc.
+ * Copyright (C) 2002,2005 SOMA Networks, Inc.
  * Copyright (C) 2001 Greg Kroah-Hartman (greg@kroah.com)
  * Copyright (C) 2001 IBM Corp.
  *
@@ -45,10 +45,10 @@
 
 #define dbg(format, arg...)					\
 	do {							\
-		if(cpci_debug)					\
+		if (cpci_debug)					\
 			printk (KERN_DEBUG "%s: " format "\n",	\
 				MY_NAME , ## arg); 		\
-	} while(0)
+	} while (0)
 #define err(format, arg...) printk(KERN_ERR "%s: " format "\n", MY_NAME , ## arg)
 #define info(format, arg...) printk(KERN_INFO "%s: " format "\n", MY_NAME , ## arg)
 #define warn(format, arg...) printk(KERN_WARNING "%s: " format "\n", MY_NAME , ## arg)
@@ -111,10 +111,8 @@ enable_slot(struct hotplug_slot *hotplug_slot)
 
 	dbg("%s - physical_slot = %s", __FUNCTION__, hotplug_slot->name);
 
-	if(controller->ops->set_power) {
+	if (controller->ops->set_power)
 		retval = controller->ops->set_power(slot, 1);
-	}
-
 	return retval;
 }
 
@@ -126,37 +124,41 @@ disable_slot(struct hotplug_slot *hotplug_slot)
 
 	dbg("%s - physical_slot = %s", __FUNCTION__, hotplug_slot->name);
 
+	down_write(&list_rwsem);
+
 	/* Unconfigure device */
 	dbg("%s - unconfiguring slot %s",
 	    __FUNCTION__, slot->hotplug_slot->name);
-	if((retval = cpci_unconfigure_slot(slot))) {
+	if ((retval = cpci_unconfigure_slot(slot))) {
 		err("%s - could not unconfigure slot %s",
 		    __FUNCTION__, slot->hotplug_slot->name);
-		return retval;
+		goto disable_error;
 	}
 	dbg("%s - finished unconfiguring slot %s",
 	    __FUNCTION__, slot->hotplug_slot->name);
 
 	/* Clear EXT (by setting it) */
-	if(cpci_clear_ext(slot)) {
+	if (cpci_clear_ext(slot)) {
 		err("%s - could not clear EXT for slot %s",
 		    __FUNCTION__, slot->hotplug_slot->name);
 		retval = -ENODEV;
+		goto disable_error;
 	}
 	cpci_led_on(slot);
 
-	if(controller->ops->set_power) {
-		retval = controller->ops->set_power(slot, 0);
-	}
+	if (controller->ops->set_power)
+		if ((retval = controller->ops->set_power(slot, 0)))
+			goto disable_error;
 
-	if(update_adapter_status(slot->hotplug_slot, 0)) {
+	if (update_adapter_status(slot->hotplug_slot, 0))
 		warn("failure to update adapter file");
-	}
 
-	if(slot->extracting) {
+	if (slot->extracting) {
 		slot->extracting = 0;
 		atomic_dec(&extracting);
 	}
+disable_error:
+	up_write(&list_rwsem);
 	return retval;
 }
 
@@ -165,9 +167,8 @@ cpci_get_power_status(struct slot *slot)
 {
 	u8 power = 1;
 
-	if(controller->ops->get_power) {
+	if (controller->ops->get_power)
 		power = controller->ops->get_power(slot);
-	}
 	return power;
 }
 
@@ -237,9 +238,8 @@ cpci_hp_register_bus(struct pci_bus *bus, u8 first, u8 last)
 	int status = -ENOMEM;
 	int i;
 
-	if(!(controller && bus)) {
+	if (!(controller && bus))
 		return -ENODEV;
-	}
 
 	/*
 	 * Create a structure for each slot, and register that slot
@@ -316,32 +316,30 @@ int
 cpci_hp_unregister_bus(struct pci_bus *bus)
 {
 	struct slot *slot;
-	struct list_head *tmp;
-	struct list_head *next;
-	int status;
+	struct slot *tmp;
+	int status = 0;
 
 	down_write(&list_rwsem);
-	if(!slots) {
+	if (!slots) {
 		up_write(&list_rwsem);
 		return -1;
 	}
-	list_for_each_safe(tmp, next, &slot_list) {
-		slot = list_entry(tmp, struct slot, slot_list);
-		if(slot->bus == bus) {
+	list_for_each_entry_safe(slot, tmp, &slot_list, slot_list) {
+		if (slot->bus == bus) {
+			list_del(&slot->slot_list);
+			slots--;
+
 			dbg("deregistering slot %s", slot->hotplug_slot->name);
 			status = pci_hp_deregister(slot->hotplug_slot);
-			if(status) {
+			if (status) {
 				err("pci_hp_deregister failed with error %d",
 				    status);
-				return status;
+				break;
 			}
-
-			list_del(&slot->slot_list);
-			slots--;
 		}
 	}
 	up_write(&list_rwsem);
-	return 0;
+	return status;
 }
 
 /* This is the interrupt mode interrupt handler */
@@ -351,7 +349,7 @@ cpci_hp_intr(int irq, void *data, struct pt_regs *regs)
 	dbg("entered cpci_hp_intr");
 
 	/* Check to see if it was our interrupt */
-	if((controller->irq_flags & SA_SHIRQ) &&
+	if ((controller->irq_flags & SA_SHIRQ) &&
 	    !controller->ops->check_irq(controller->dev_id)) {
 		dbg("exited cpci_hp_intr, not our interrupt");
 		return IRQ_NONE;
@@ -373,38 +371,30 @@ cpci_hp_intr(int irq, void *data, struct pt_regs *regs)
  * INS bits of the cold-inserted devices.
  */
 static int
-init_slots(void)
+init_slots(int clear_ins)
 {
 	struct slot *slot;
-	struct list_head *tmp;
 	struct pci_dev* dev;
 
 	dbg("%s - enter", __FUNCTION__);
 	down_read(&list_rwsem);
-	if(!slots) {
+	if (!slots) {
 		up_read(&list_rwsem);
 		return -1;
 	}
-	list_for_each(tmp, &slot_list) {
-		slot = list_entry(tmp, struct slot, slot_list);
+	list_for_each_entry(slot, &slot_list, slot_list) {
 		dbg("%s - looking at slot %s",
 		    __FUNCTION__, slot->hotplug_slot->name);
-		if(cpci_check_and_clear_ins(slot)) {
+		if (clear_ins && cpci_check_and_clear_ins(slot))
 			dbg("%s - cleared INS for slot %s",
 			    __FUNCTION__, slot->hotplug_slot->name);
-			dev = pci_find_slot(slot->bus->number, PCI_DEVFN(slot->number, 0));
-			if(dev) {
-				if(update_adapter_status(slot->hotplug_slot, 1)) {
-					warn("failure to update adapter file");
-				}
-				if(update_latch_status(slot->hotplug_slot, 1)) {
-					warn("failure to update latch file");
-				}
-				slot->dev = dev;
-			} else {
-				err("%s - no driver attached to device in slot %s",
-				    __FUNCTION__, slot->hotplug_slot->name);
-			}
+		dev = pci_get_slot(slot->bus, PCI_DEVFN(slot->number, 0));
+		if (dev) {
+			if (update_adapter_status(slot->hotplug_slot, 1))
+				warn("failure to update adapter file");
+			if (update_latch_status(slot->hotplug_slot, 1))
+				warn("failure to update latch file");
+			slot->dev = dev;
 		}
 	}
 	up_read(&list_rwsem);
@@ -416,26 +406,28 @@ static int
 check_slots(void)
 {
 	struct slot *slot;
-	struct list_head *tmp;
 	int extracted;
 	int inserted;
 	u16 hs_csr;
 
 	down_read(&list_rwsem);
-	if(!slots) {
+	if (!slots) {
 		up_read(&list_rwsem);
 		err("no slots registered, shutting down");
 		return -1;
 	}
 	extracted = inserted = 0;
-	list_for_each(tmp, &slot_list) {
-		slot = list_entry(tmp, struct slot, slot_list);
+	list_for_each_entry(slot, &slot_list, slot_list) {
 		dbg("%s - looking at slot %s",
 		    __FUNCTION__, slot->hotplug_slot->name);
-		if(cpci_check_and_clear_ins(slot)) {
-			/* Some broken hardware (e.g. PLX 9054AB) asserts ENUM# twice... */
-			if(slot->dev) {
-				warn("slot %s already inserted", slot->hotplug_slot->name);
+		if (cpci_check_and_clear_ins(slot)) {
+			/*
+			 * Some broken hardware (e.g. PLX 9054AB) asserts
+			 * ENUM# twice...
+			 */
+			if (slot->dev) {
+				warn("slot %s already inserted",
+				     slot->hotplug_slot->name);
 				inserted++;
 				continue;
 			}
@@ -452,7 +444,7 @@ check_slots(void)
 			/* Configure device */
 			dbg("%s - configuring slot %s",
 			    __FUNCTION__, slot->hotplug_slot->name);
-			if(cpci_configure_slot(slot)) {
+			if (cpci_configure_slot(slot)) {
 				err("%s - could not configure slot %s",
 				    __FUNCTION__, slot->hotplug_slot->name);
 				continue;
@@ -465,13 +457,11 @@ check_slots(void)
 			dbg("%s - slot %s HS_CSR (2) = %04x",
 			    __FUNCTION__, slot->hotplug_slot->name, hs_csr);
 
-			if(update_latch_status(slot->hotplug_slot, 1)) {
+			if (update_latch_status(slot->hotplug_slot, 1))
 				warn("failure to update latch file");
-			}
 
-			if(update_adapter_status(slot->hotplug_slot, 1)) {
+			if (update_adapter_status(slot->hotplug_slot, 1))
 				warn("failure to update adapter file");
-			}
 
 			cpci_led_off(slot);
 
@@ -481,7 +471,7 @@ check_slots(void)
 			    __FUNCTION__, slot->hotplug_slot->name, hs_csr);
 
 			inserted++;
-		} else if(cpci_check_ext(slot)) {
+		} else if (cpci_check_ext(slot)) {
 			/* Process extraction request */
 			dbg("%s - slot %s extracted",
 			    __FUNCTION__, slot->hotplug_slot->name);
@@ -491,27 +481,25 @@ check_slots(void)
 			dbg("%s - slot %s HS_CSR = %04x",
 			    __FUNCTION__, slot->hotplug_slot->name, hs_csr);
 
-			if(!slot->extracting) {
-				if(update_latch_status(slot->hotplug_slot, 0)) {
+			if (!slot->extracting) {
+				if (update_latch_status(slot->hotplug_slot, 0)) {
 					warn("failure to update latch file");
-
 				}
-				atomic_inc(&extracting);
 				slot->extracting = 1;
+				atomic_inc(&extracting);
 			}
 			extracted++;
-		} else if(slot->extracting) {
+		} else if (slot->extracting) {
 			hs_csr = cpci_get_hs_csr(slot);
-			if(hs_csr == 0xffff) {
+			if (hs_csr == 0xffff) {
 				/*
 				 * Hmmm, we're likely hosed at this point, should we
 				 * bother trying to tell the driver or not?
 				 */
 				err("card in slot %s was improperly removed",
 				    slot->hotplug_slot->name);
-				if(update_adapter_status(slot->hotplug_slot, 0)) {
+				if (update_adapter_status(slot->hotplug_slot, 0))
 					warn("failure to update adapter file");
-				}
 				slot->extracting = 0;
 				atomic_dec(&extracting);
 			}
@@ -520,10 +508,9 @@ check_slots(void)
 	up_read(&list_rwsem);
 	dbg("inserted=%d, extracted=%d, extracting=%d",
 	    inserted, extracted, atomic_read(&extracting));
-	if(inserted || extracted) {
+	if (inserted || extracted)
 		return extracted;
-	}
-	else if(!atomic_read(&extracting)) {
+	else if (!atomic_read(&extracting)) {
 		err("cannot find ENUM# source, shutting down");
 		return -1;
 	}
@@ -541,12 +528,12 @@ event_thread(void *data)
 	unlock_kernel();
 
 	dbg("%s - event thread started", __FUNCTION__);
-	while(1) {
+	while (1) {
 		dbg("event thread sleeping");
 		down_interruptible(&event_semaphore);
 		dbg("event thread woken, thread_finished = %d",
 		    thread_finished);
-		if(thread_finished || signal_pending(current))
+		if (thread_finished || signal_pending(current))
 			break;
 		do {
 			rc = check_slots();
@@ -558,7 +545,9 @@ event_thread(void *data)
 				thread_finished = 1;
 				break;
 			}
-		} while(atomic_read(&extracting) != 0);
+		} while (atomic_read(&extracting) && !thread_finished);
+		if (thread_finished)
+			break;
 
 		/* Re-enable ENUM# interrupt */
 		dbg("%s - re-enabling irq", __FUNCTION__);
@@ -579,21 +568,21 @@ poll_thread(void *data)
 	daemonize("cpci_hp_polld");
 	unlock_kernel();
 
-	while(1) {
-		if(thread_finished || signal_pending(current))
+	while (1) {
+		if (thread_finished || signal_pending(current))
 			break;
-		if(controller->ops->query_enum()) {
+		if (controller->ops->query_enum()) {
 			do {
 				rc = check_slots();
-				if(rc > 0) {
+				if (rc > 0) {
 					/* Give userspace a chance to handle extraction */
 					msleep(500);
-				} else if(rc < 0) {
+				} else if (rc < 0) {
 					dbg("%s - error checking slots", __FUNCTION__);
 					thread_finished = 1;
 					break;
 				}
-			} while(atomic_read(&extracting) != 0);
+			} while (atomic_read(&extracting) && !thread_finished);
 		}
 		msleep(100);
 	}
@@ -612,12 +601,11 @@ cpci_start_thread(void)
 	init_MUTEX_LOCKED(&thread_exit);
 	thread_finished = 0;
 
-	if(controller->irq) {
+	if (controller->irq)
 		pid = kernel_thread(event_thread, NULL, 0);
-	} else {
+	else
 		pid = kernel_thread(poll_thread, NULL, 0);
-	}
-	if(pid < 0) {
+	if (pid < 0) {
 		err("Can't start up our thread");
 		return -1;
 	}
@@ -630,9 +618,8 @@ cpci_stop_thread(void)
 {
 	thread_finished = 1;
 	dbg("thread finish command given");
-	if(controller->irq) {
+	if (controller->irq)
 		up(&event_semaphore);
-	}
 	dbg("wait for thread to exit");
 	down(&thread_exit);
 }
@@ -642,45 +629,67 @@ cpci_hp_register_controller(struct cpci_hp_controller *new_controller)
 {
 	int status = 0;
 
-	if(!controller) {
-		controller = new_controller;
-		if(controller->irq) {
-			if(request_irq(controller->irq,
-					cpci_hp_intr,
-					controller->irq_flags,
-					MY_NAME, controller->dev_id)) {
-				err("Can't get irq %d for the hotplug cPCI controller", controller->irq);
-				status = -ENODEV;
-			}
-			dbg("%s - acquired controller irq %d", __FUNCTION__,
-			    controller->irq);
+	if (controller)
+		return -1;
+	if (!(new_controller && new_controller->ops))
+		return -EINVAL;
+	if (new_controller->irq) {
+		if (!(new_controller->ops->enable_irq &&
+		     new_controller->ops->disable_irq))
+			status = -EINVAL;
+		if (request_irq(new_controller->irq,
+			       cpci_hp_intr,
+			       new_controller->irq_flags,
+			       MY_NAME,
+			       new_controller->dev_id)) {
+			err("Can't get irq %d for the hotplug cPCI controller",
+			    new_controller->irq);
+			status = -ENODEV;
 		}
-	} else {
-		err("cPCI hotplug controller already registered");
-		status = -1;
+		dbg("%s - acquired controller irq %d",
+		    __FUNCTION__, new_controller->irq);
 	}
+	if (!status)
+		controller = new_controller;
 	return status;
 }
 
+static void
+cleanup_slots(void)
+{
+	struct slot *slot;
+	struct slot *tmp;
+
+	/*
+	 * Unregister all of our slots with the pci_hotplug subsystem,
+	 * and free up all memory that we had allocated.
+	 */
+	down_write(&list_rwsem);
+	if (!slots)
+		goto cleanup_null;
+	list_for_each_entry_safe(slot, tmp, &slot_list, slot_list) {
+		list_del(&slot->slot_list);
+		pci_hp_deregister(slot->hotplug_slot);
+	}
+cleanup_null:
+	up_write(&list_rwsem);
+	return;
+}
+
 int
 cpci_hp_unregister_controller(struct cpci_hp_controller *old_controller)
 {
 	int status = 0;
 
-	if(controller) {
-		if(atomic_read(&extracting) != 0) {
-			return -EBUSY;
-		}
-		if(!thread_finished) {
+	if (controller) {
+		if (!thread_finished)
 			cpci_stop_thread();
-		}
-		if(controller->irq) {
+		if (controller->irq)
 			free_irq(controller->irq, controller->dev_id);
-		}
 		controller = NULL;
-	} else {
+		cleanup_slots();
+	} else
 		status = -ENODEV;
-	}
 	return status;
 }
 
@@ -691,32 +700,28 @@ cpci_hp_start(void)
 	int status;
 
 	dbg("%s - enter", __FUNCTION__);
-	if(!controller) {
+	if (!controller)
 		return -ENODEV;
-	}
 
 	down_read(&list_rwsem);
-	if(list_empty(&slot_list)) {
+	if (list_empty(&slot_list)) {
 		up_read(&list_rwsem);
 		return -ENODEV;
 	}
 	up_read(&list_rwsem);
 
-	if(first) {
-		status = init_slots();
-		if(status) {
-			return status;
-		}
+	status = init_slots(first);
+	if (first)
 		first = 0;
-	}
+	if (status)
+		return status;
 
 	status = cpci_start_thread();
-	if(status) {
+	if (status)
 		return status;
-	}
 	dbg("%s - thread started", __FUNCTION__);
 
-	if(controller->irq) {
+	if (controller->irq) {
 		/* Start enum interrupt processing */
 		dbg("%s - enabling irq", __FUNCTION__);
 		controller->ops->enable_irq();
@@ -728,13 +733,9 @@ cpci_hp_start(void)
 int
 cpci_hp_stop(void)
 {
-	if(!controller) {
+	if (!controller)
 		return -ENODEV;
-	}
-	if(atomic_read(&extracting) != 0) {
-		return -EBUSY;
-	}
-	if(controller->irq) {
+	if (controller->irq) {
 		/* Stop enum interrupt processing */
 		dbg("%s - disabling irq", __FUNCTION__);
 		controller->ops->disable_irq();
@@ -743,34 +744,6 @@ cpci_hp_stop(void)
 	return 0;
 }
 
-static void __exit
-cleanup_slots(void)
-{
-	struct list_head *tmp;
-	struct slot *slot;
-
-	/*
-	 * Unregister all of our slots with the pci_hotplug subsystem,
-	 * and free up all memory that we had allocated.
-	 */
-	down_write(&list_rwsem);
-	if(!slots) {
-		goto null_cleanup;
-	}
-	list_for_each(tmp, &slot_list) {
-		slot = list_entry(tmp, struct slot, slot_list);
-		list_del(&slot->slot_list);
-		pci_hp_deregister(slot->hotplug_slot);
-		kfree(slot->hotplug_slot->info);
-		kfree(slot->hotplug_slot->name);
-		kfree(slot->hotplug_slot);
-		kfree(slot);
-	}
-      null_cleanup:
-	up_write(&list_rwsem);
-	return;
-}
-
 int __init
 cpci_hotplug_init(int debug)
 {
@@ -784,7 +757,8 @@ cpci_hotplug_exit(void)
 	/*
 	 * Clean everything up.
 	 */
-	cleanup_slots();
+	cpci_hp_stop();
+	cpci_hp_unregister_controller(controller);
 }
 
 EXPORT_SYMBOL_GPL(cpci_hp_register_controller);
diff --git a/drivers/pci/hotplug/cpci_hotplug_pci.c b/drivers/pci/hotplug/cpci_hotplug_pci.c
index 69eb4fc54f2f..c878028ad215 100644
--- a/drivers/pci/hotplug/cpci_hotplug_pci.c
+++ b/drivers/pci/hotplug/cpci_hotplug_pci.c
@@ -1,7 +1,7 @@
 /*
  * CompactPCI Hot Plug Driver PCI functions
  *
- * Copyright (C) 2002 by SOMA Networks, Inc.
+ * Copyright (C) 2002,2005 by SOMA Networks, Inc.
  *
  * All rights reserved.
  *
@@ -38,10 +38,10 @@ extern int cpci_debug;
 
 #define dbg(format, arg...)					\
 	do {							\
-		if(cpci_debug)					\
+		if (cpci_debug)					\
 			printk (KERN_DEBUG "%s: " format "\n",	\
 				MY_NAME , ## arg); 		\
-	} while(0)
+	} while (0)
 #define err(format, arg...) printk(KERN_ERR "%s: " format "\n", MY_NAME , ## arg)
 #define info(format, arg...) printk(KERN_INFO "%s: " format "\n", MY_NAME , ## arg)
 #define warn(format, arg...) printk(KERN_WARNING "%s: " format "\n", MY_NAME , ## arg)
@@ -57,16 +57,15 @@ u8 cpci_get_attention_status(struct slot* slot)
 	hs_cap = pci_bus_find_capability(slot->bus,
 					 slot->devfn,
 					 PCI_CAP_ID_CHSWP);
-	if(!hs_cap) {
+	if (!hs_cap)
 		return 0;
-	}
 
-	if(pci_bus_read_config_word(slot->bus,
+	if (pci_bus_read_config_word(slot->bus,
 				     slot->devfn,
 				     hs_cap + 2,
-				     &hs_csr)) {
+				     &hs_csr))
 		return 0;
-	}
+
 	return hs_csr & 0x0008 ? 1 : 0;
 }
 
@@ -78,27 +77,22 @@ int cpci_set_attention_status(struct slot* slot, int status)
 	hs_cap = pci_bus_find_capability(slot->bus,
 					 slot->devfn,
 					 PCI_CAP_ID_CHSWP);
-	if(!hs_cap) {
+	if (!hs_cap)
 		return 0;
-	}
-
-	if(pci_bus_read_config_word(slot->bus,
+	if (pci_bus_read_config_word(slot->bus,
 				     slot->devfn,
 				     hs_cap + 2,
-				     &hs_csr)) {
+				     &hs_csr))
 		return 0;
-	}
-	if(status) {
+	if (status)
 		hs_csr |= HS_CSR_LOO;
-	} else {
+	else
 		hs_csr &= ~HS_CSR_LOO;
-	}
-	if(pci_bus_write_config_word(slot->bus,
+	if (pci_bus_write_config_word(slot->bus,
 				      slot->devfn,
 				      hs_cap + 2,
-				      hs_csr)) {
+				      hs_csr))
 		return 0;
-	}
 	return 1;
 }
 
@@ -110,16 +104,13 @@ u16 cpci_get_hs_csr(struct slot* slot)
 	hs_cap = pci_bus_find_capability(slot->bus,
 					 slot->devfn,
 					 PCI_CAP_ID_CHSWP);
-	if(!hs_cap) {
+	if (!hs_cap)
 		return 0xFFFF;
-	}
-
-	if(pci_bus_read_config_word(slot->bus,
+	if (pci_bus_read_config_word(slot->bus,
 				     slot->devfn,
 				     hs_cap + 2,
-				     &hs_csr)) {
+				     &hs_csr))
 		return 0xFFFF;
-	}
 	return hs_csr;
 }
 
@@ -132,24 +123,22 @@ int cpci_check_and_clear_ins(struct slot* slot)
 	hs_cap = pci_bus_find_capability(slot->bus,
 					 slot->devfn,
 					 PCI_CAP_ID_CHSWP);
-	if(!hs_cap) {
+	if (!hs_cap)
 		return 0;
-	}
-	if(pci_bus_read_config_word(slot->bus,
+	if (pci_bus_read_config_word(slot->bus,
 				     slot->devfn,
 				     hs_cap + 2,
-				     &hs_csr)) {
+				     &hs_csr))
 		return 0;
-	}
-	if(hs_csr & HS_CSR_INS) {
+	if (hs_csr & HS_CSR_INS) {
 		/* Clear INS (by setting it) */
-		if(pci_bus_write_config_word(slot->bus,
+		if (pci_bus_write_config_word(slot->bus,
 					      slot->devfn,
 					      hs_cap + 2,
-					      hs_csr)) {
+					      hs_csr))
 			ins = 0;
-		}
-		ins = 1;
+		else
+			ins = 1;
 	}
 	return ins;
 }
@@ -163,18 +152,15 @@ int cpci_check_ext(struct slot* slot)
 	hs_cap = pci_bus_find_capability(slot->bus,
 					 slot->devfn,
 					 PCI_CAP_ID_CHSWP);
-	if(!hs_cap) {
+	if (!hs_cap)
 		return 0;
-	}
-	if(pci_bus_read_config_word(slot->bus,
+	if (pci_bus_read_config_word(slot->bus,
 				     slot->devfn,
 				     hs_cap + 2,
-				     &hs_csr)) {
+				     &hs_csr))
 		return 0;
-	}
-	if(hs_csr & HS_CSR_EXT) {
+	if (hs_csr & HS_CSR_EXT)
 		ext = 1;
-	}
 	return ext;
 }
 
@@ -186,23 +172,20 @@ int cpci_clear_ext(struct slot* slot)
 	hs_cap = pci_bus_find_capability(slot->bus,
 					 slot->devfn,
 					 PCI_CAP_ID_CHSWP);
-	if(!hs_cap) {
+	if (!hs_cap)
 		return -ENODEV;
-	}
-	if(pci_bus_read_config_word(slot->bus,
+	if (pci_bus_read_config_word(slot->bus,
 				     slot->devfn,
 				     hs_cap + 2,
-				     &hs_csr)) {
+				     &hs_csr))
 		return -ENODEV;
-	}
-	if(hs_csr & HS_CSR_EXT) {
+	if (hs_csr & HS_CSR_EXT) {
 		/* Clear EXT (by setting it) */
-		if(pci_bus_write_config_word(slot->bus,
+		if (pci_bus_write_config_word(slot->bus,
 					      slot->devfn,
 					      hs_cap + 2,
-					      hs_csr)) {
+					      hs_csr))
 			return -ENODEV;
-		}
 	}
 	return 0;
 }
@@ -215,18 +198,16 @@ int cpci_led_on(struct slot* slot)
 	hs_cap = pci_bus_find_capability(slot->bus,
 					 slot->devfn,
 					 PCI_CAP_ID_CHSWP);
-	if(!hs_cap) {
+	if (!hs_cap)
 		return -ENODEV;
-	}
-	if(pci_bus_read_config_word(slot->bus,
+	if (pci_bus_read_config_word(slot->bus,
 				     slot->devfn,
 				     hs_cap + 2,
-				     &hs_csr)) {
+				     &hs_csr))
 		return -ENODEV;
-	}
-	if((hs_csr & HS_CSR_LOO) != HS_CSR_LOO) {
+	if ((hs_csr & HS_CSR_LOO) != HS_CSR_LOO) {
 		hs_csr |= HS_CSR_LOO;
-		if(pci_bus_write_config_word(slot->bus,
+		if (pci_bus_write_config_word(slot->bus,
 					      slot->devfn,
 					      hs_cap + 2,
 					      hs_csr)) {
@@ -246,18 +227,16 @@ int cpci_led_off(struct slot* slot)
 	hs_cap = pci_bus_find_capability(slot->bus,
 					 slot->devfn,
 					 PCI_CAP_ID_CHSWP);
-	if(!hs_cap) {
+	if (!hs_cap)
 		return -ENODEV;
-	}
-	if(pci_bus_read_config_word(slot->bus,
+	if (pci_bus_read_config_word(slot->bus,
 				     slot->devfn,
 				     hs_cap + 2,
-				     &hs_csr)) {
+				     &hs_csr))
 		return -ENODEV;
-	}
-	if(hs_csr & HS_CSR_LOO) {
+	if (hs_csr & HS_CSR_LOO) {
 		hs_csr &= ~HS_CSR_LOO;
-		if(pci_bus_write_config_word(slot->bus,
+		if (pci_bus_write_config_word(slot->bus,
 					      slot->devfn,
 					      hs_cap + 2,
 					      hs_csr)) {
@@ -274,19 +253,6 @@ int cpci_led_off(struct slot* slot)
  * Device configuration functions
  */
 
-static void cpci_enable_device(struct pci_dev *dev)
-{
-	struct pci_bus *bus;
-
-	pci_enable_device(dev);
-	if(dev->hdr_type == PCI_HEADER_TYPE_BRIDGE) {
-		bus = dev->subordinate;
-		list_for_each_entry(dev, &bus->devices, bus_list) {
-			cpci_enable_device(dev);
-		}
-	}
-}
-
 int cpci_configure_slot(struct slot* slot)
 {
 	unsigned char busnr;
@@ -294,14 +260,14 @@ int cpci_configure_slot(struct slot* slot)
 
 	dbg("%s - enter", __FUNCTION__);
 
-	if(slot->dev == NULL) {
+	if (slot->dev == NULL) {
 		dbg("pci_dev null, finding %02x:%02x:%x",
 		    slot->bus->number, PCI_SLOT(slot->devfn), PCI_FUNC(slot->devfn));
-		slot->dev = pci_find_slot(slot->bus->number, slot->devfn);
+		slot->dev = pci_get_slot(slot->bus, slot->devfn);
 	}
 
 	/* Still NULL? Well then scan for it! */
-	if(slot->dev == NULL) {
+	if (slot->dev == NULL) {
 		int n;
 		dbg("pci_dev still null");
 
@@ -311,10 +277,10 @@ int cpci_configure_slot(struct slot* slot)
 		 */
 		n = pci_scan_slot(slot->bus, slot->devfn);
 		dbg("%s: pci_scan_slot returned %d", __FUNCTION__, n);
-		if(n > 0)
+		if (n > 0)
 			pci_bus_add_devices(slot->bus);
-		slot->dev = pci_find_slot(slot->bus->number, slot->devfn);
-		if(slot->dev == NULL) {
+		slot->dev = pci_get_slot(slot->bus, slot->devfn);
+		if (slot->dev == NULL) {
 			err("Could not find PCI device for slot %02x", slot->number);
 			return 1;
 		}
@@ -329,8 +295,6 @@ int cpci_configure_slot(struct slot* slot)
 
 	pci_bus_assign_resources(slot->dev->bus);
 
-	cpci_enable_device(slot->dev);
-
 	dbg("%s - exit", __FUNCTION__);
 	return 0;
 }
@@ -341,15 +305,15 @@ int cpci_unconfigure_slot(struct slot* slot)
 	struct pci_dev *dev;
 
 	dbg("%s - enter", __FUNCTION__);
-	if(!slot->dev) {
+	if (!slot->dev) {
 		err("No device for slot %02x\n", slot->number);
 		return -ENODEV;
 	}
 
 	for (i = 0; i < 8; i++) {
-		dev = pci_find_slot(slot->bus->number,
+		dev = pci_get_slot(slot->bus,
 				    PCI_DEVFN(PCI_SLOT(slot->devfn), i));
-		if(dev) {
+		if (dev) {
 			pci_remove_bus_device(dev);
 			slot->dev = NULL;
 		}
diff --git a/drivers/pci/hotplug/shpchprm_acpi.c b/drivers/pci/hotplug/shpchprm_acpi.c
index 243a51d88b86..7957cdc72cd0 100644
--- a/drivers/pci/hotplug/shpchprm_acpi.c
+++ b/drivers/pci/hotplug/shpchprm_acpi.c
@@ -1626,7 +1626,7 @@ int shpchprm_set_hpp(
 	pci_bus->number = func->bus;
 	devfn = PCI_DEVFN(func->device, func->function);
 
-	ab = find_acpi_bridge_by_bus(acpi_bridges_head, ctrl->seg, ctrl->bus);
+	ab = find_acpi_bridge_by_bus(acpi_bridges_head, ctrl->seg, ctrl->slot_bus);
 
 	if (ab) {
 		if (ab->_hpp) {
@@ -1681,7 +1681,7 @@ void shpchprm_enable_card(
 		| PCI_COMMAND_IO | PCI_COMMAND_MEMORY;
 	bcmd = bcommand  = bcommand | PCI_BRIDGE_CTL_NO_ISA;
 
-	ab = find_acpi_bridge_by_bus(acpi_bridges_head, ctrl->seg, ctrl->bus);
+	ab = find_acpi_bridge_by_bus(acpi_bridges_head, ctrl->seg, ctrl->slot_bus);
 	if (ab) {
 		if (ab->_hpp) {
 			if (ab->_hpp->enable_perr) {
diff --git a/drivers/scsi/ata_piix.c b/drivers/scsi/ata_piix.c
index 54c52349adc5..3be546439252 100644
--- a/drivers/scsi/ata_piix.c
+++ b/drivers/scsi/ata_piix.c
@@ -665,15 +665,6 @@ static int piix_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
 	return ata_pci_init_one(pdev, port_info, n_ports);
 }
 
-/**
- *	piix_init -
- *
- *	LOCKING:
- *
- *	RETURNS:
- *
- */
-
 static int __init piix_init(void)
 {
 	int rc;
@@ -689,13 +680,6 @@ static int __init piix_init(void)
 	return 0;
 }
 
-/**
- *	piix_exit -
- *
- *	LOCKING:
- *
- */
-
 static void __exit piix_exit(void)
 {
 	pci_unregister_driver(&piix_pci_driver);
diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c
index 30a88f0e7bd6..21d194c6ace3 100644
--- a/drivers/scsi/libata-core.c
+++ b/drivers/scsi/libata-core.c
@@ -186,6 +186,28 @@ static void ata_tf_load_mmio(struct ata_port *ap, struct ata_taskfile *tf)
 	ata_wait_idle(ap);
 }
 
+
+/**
+ *	ata_tf_load - send taskfile registers to host controller
+ *	@ap: Port to which output is sent
+ *	@tf: ATA taskfile register set
+ *
+ *	Outputs ATA taskfile to standard ATA host controller using MMIO
+ *	or PIO as indicated by the ATA_FLAG_MMIO flag.
+ *	Writes the control, feature, nsect, lbal, lbam, and lbah registers.
+ *	Optionally (ATA_TFLAG_LBA48) writes hob_feature, hob_nsect,
+ *	hob_lbal, hob_lbam, and hob_lbah.
+ *
+ *	This function waits for idle (!BUSY and !DRQ) after writing
+ *	registers.  If the control register has a new value, this
+ *	function also waits for idle after writing control and before
+ *	writing the remaining registers.
+ *
+ *	May be used as the tf_load() entry in ata_port_operations.
+ *
+ *	LOCKING:
+ *	Inherited from caller.
+ */
 void ata_tf_load(struct ata_port *ap, struct ata_taskfile *tf)
 {
 	if (ap->flags & ATA_FLAG_MMIO)
@@ -195,11 +217,11 @@ void ata_tf_load(struct ata_port *ap, struct ata_taskfile *tf)
 }
 
 /**
- *	ata_exec_command - issue ATA command to host controller
+ *	ata_exec_command_pio - issue ATA command to host controller
  *	@ap: port to which command is being issued
  *	@tf: ATA taskfile register set
  *
- *	Issues PIO/MMIO write to ATA command register, with proper
+ *	Issues PIO write to ATA command register, with proper
  *	synchronization with interrupt handler / other threads.
  *
  *	LOCKING:
@@ -235,6 +257,18 @@ static void ata_exec_command_mmio(struct ata_port *ap, struct ata_taskfile *tf)
 	ata_pause(ap);
 }
 
+
+/**
+ *	ata_exec_command - issue ATA command to host controller
+ *	@ap: port to which command is being issued
+ *	@tf: ATA taskfile register set
+ *
+ *	Issues PIO/MMIO write to ATA command register, with proper
+ *	synchronization with interrupt handler / other threads.
+ *
+ *	LOCKING:
+ *	spin_lock_irqsave(host_set lock)
+ */
 void ata_exec_command(struct ata_port *ap, struct ata_taskfile *tf)
 {
 	if (ap->flags & ATA_FLAG_MMIO)
@@ -305,7 +339,7 @@ void ata_tf_to_host_nolock(struct ata_port *ap, struct ata_taskfile *tf)
 }
 
 /**
- *	ata_tf_read - input device's ATA taskfile shadow registers
+ *	ata_tf_read_pio - input device's ATA taskfile shadow registers
  *	@ap: Port from which input is read
  *	@tf: ATA taskfile register set for storing input
  *
@@ -368,6 +402,23 @@ static void ata_tf_read_mmio(struct ata_port *ap, struct ata_taskfile *tf)
 	}
 }
 
+
+/**
+ *	ata_tf_read - input device's ATA taskfile shadow registers
+ *	@ap: Port from which input is read
+ *	@tf: ATA taskfile register set for storing input
+ *
+ *	Reads ATA taskfile registers for currently-selected device
+ *	into @tf.
+ *
+ *	Reads nsect, lbal, lbam, lbah, and device.  If ATA_TFLAG_LBA48
+ *	is set, also reads the hob registers.
+ *
+ *	May be used as the tf_read() entry in ata_port_operations.
+ *
+ *	LOCKING:
+ *	Inherited from caller.
+ */
 void ata_tf_read(struct ata_port *ap, struct ata_taskfile *tf)
 {
 	if (ap->flags & ATA_FLAG_MMIO)
@@ -381,7 +432,7 @@ void ata_tf_read(struct ata_port *ap, struct ata_taskfile *tf)
  *	@ap: port where the device is
  *
  *	Reads ATA taskfile status register for currently-selected device
- *	and return it's value. This also clears pending interrupts
+ *	and return its value. This also clears pending interrupts
  *      from this device
  *
  *	LOCKING:
@@ -397,7 +448,7 @@ static u8 ata_check_status_pio(struct ata_port *ap)
  *	@ap: port where the device is
  *
  *	Reads ATA taskfile status register for currently-selected device
- *	via MMIO and return it's value. This also clears pending interrupts
+ *	via MMIO and return its value. This also clears pending interrupts
  *      from this device
  *
  *	LOCKING:
@@ -408,6 +459,20 @@ static u8 ata_check_status_mmio(struct ata_port *ap)
        	return readb((void __iomem *) ap->ioaddr.status_addr);
 }
 
+
+/**
+ *	ata_check_status - Read device status reg & clear interrupt
+ *	@ap: port where the device is
+ *
+ *	Reads ATA taskfile status register for currently-selected device
+ *	and return its value. This also clears pending interrupts
+ *      from this device
+ *
+ *	May be used as the check_status() entry in ata_port_operations.
+ *
+ *	LOCKING:
+ *	Inherited from caller.
+ */
 u8 ata_check_status(struct ata_port *ap)
 {
 	if (ap->flags & ATA_FLAG_MMIO)
@@ -415,6 +480,20 @@ u8 ata_check_status(struct ata_port *ap)
 	return ata_check_status_pio(ap);
 }
 
+
+/**
+ *	ata_altstatus - Read device alternate status reg
+ *	@ap: port where the device is
+ *
+ *	Reads ATA taskfile alternate status register for
+ *	currently-selected device and return its value.
+ *
+ *	Note: may NOT be used as the check_altstatus() entry in
+ *	ata_port_operations.
+ *
+ *	LOCKING:
+ *	Inherited from caller.
+ */
 u8 ata_altstatus(struct ata_port *ap)
 {
 	if (ap->ops->check_altstatus)
@@ -425,6 +504,20 @@ u8 ata_altstatus(struct ata_port *ap)
 	return inb(ap->ioaddr.altstatus_addr);
 }
 
+
+/**
+ *	ata_chk_err - Read device error reg
+ *	@ap: port where the device is
+ *
+ *	Reads ATA taskfile error register for
+ *	currently-selected device and return its value.
+ *
+ *	Note: may NOT be used as the check_err() entry in
+ *	ata_port_operations.
+ *
+ *	LOCKING:
+ *	Inherited from caller.
+ */
 u8 ata_chk_err(struct ata_port *ap)
 {
 	if (ap->ops->check_err)
@@ -873,10 +966,24 @@ void ata_dev_id_string(u16 *id, unsigned char *s,
 	}
 }
 
+
+/**
+ *	ata_noop_dev_select - Select device 0/1 on ATA bus
+ *	@ap: ATA channel to manipulate
+ *	@device: ATA device (numbered from zero) to select
+ *
+ *	This function performs no actual function.
+ *
+ *	May be used as the dev_select() entry in ata_port_operations.
+ *
+ *	LOCKING:
+ *	caller.
+ */
 void ata_noop_dev_select (struct ata_port *ap, unsigned int device)
 {
 }
 
+
 /**
  *	ata_std_dev_select - Select device 0/1 on ATA bus
  *	@ap: ATA channel to manipulate
@@ -884,7 +991,9 @@ void ata_noop_dev_select (struct ata_port *ap, unsigned int device)
  *
  *	Use the method defined in the ATA specification to
  *	make either device 0, or device 1, active on the
- *	ATA channel.
+ *	ATA channel.  Works with both PIO and MMIO.
+ *
+ *	May be used as the dev_select() entry in ata_port_operations.
  *
  *	LOCKING:
  *	caller.
@@ -1190,7 +1299,12 @@ err_out:
  *	ata_bus_probe - Reset and probe ATA bus
  *	@ap: Bus to probe
  *
+ *	Master ATA bus probing function.  Initiates a hardware-dependent
+ *	bus reset, then attempts to identify any devices found on
+ *	the bus.
+ *
  *	LOCKING:
+ *	PCI/etc. bus probe sem.
  *
  *	RETURNS:
  *	Zero on success, non-zero on error.
@@ -1229,10 +1343,14 @@ err_out:
 }
 
 /**
- *	ata_port_probe -
- *	@ap:
+ *	ata_port_probe - Mark port as enabled
+ *	@ap: Port for which we indicate enablement
  *
- *	LOCKING:
+ *	Modify @ap data structure such that the system
+ *	thinks that the entire port is enabled.
+ *
+ *	LOCKING: host_set lock, or some other form of
+ *	serialization.
  */
 
 void ata_port_probe(struct ata_port *ap)
@@ -1241,10 +1359,15 @@ void ata_port_probe(struct ata_port *ap)
 }
 
 /**
- *	__sata_phy_reset -
- *	@ap:
+ *	__sata_phy_reset - Wake/reset a low-level SATA PHY
+ *	@ap: SATA port associated with target SATA PHY.
+ *
+ *	This function issues commands to standard SATA Sxxx
+ *	PHY registers, to wake up the phy (and device), and
+ *	clear any reset condition.
  *
  *	LOCKING:
+ *	PCI/etc. bus probe sem.
  *
  */
 void __sata_phy_reset(struct ata_port *ap)
@@ -1289,10 +1412,14 @@ void __sata_phy_reset(struct ata_port *ap)
 }
 
 /**
- *	__sata_phy_reset -
- *	@ap:
+ *	sata_phy_reset - Reset SATA bus.
+ *	@ap: SATA port associated with target SATA PHY.
+ *
+ *	This function resets the SATA bus, and then probes
+ *	the bus for devices.
  *
  *	LOCKING:
+ *	PCI/etc. bus probe sem.
  *
  */
 void sata_phy_reset(struct ata_port *ap)
@@ -1304,10 +1431,16 @@ void sata_phy_reset(struct ata_port *ap)
 }
 
 /**
- *	ata_port_disable -
- *	@ap:
+ *	ata_port_disable - Disable port.
+ *	@ap: Port to be disabled.
  *
- *	LOCKING:
+ *	Modify @ap data structure such that the system
+ *	thinks that the entire port is disabled, and should
+ *	never attempt to probe or communicate with devices
+ *	on this port.
+ *
+ *	LOCKING: host_set lock, or some other form of
+ *	serialization.
  */
 
 void ata_port_disable(struct ata_port *ap)
@@ -1416,7 +1549,10 @@ static void ata_host_set_dma(struct ata_port *ap, u8 xfer_mode,
  *	ata_set_mode - Program timings and issue SET FEATURES - XFER
  *	@ap: port on which timings will be programmed
  *
+ *	Set ATA device disk transfer mode (PIO3, UDMA6, etc.).
+ *
  *	LOCKING:
+ *	PCI/etc. bus probe sem.
  *
  */
 static void ata_set_mode(struct ata_port *ap)
@@ -1467,7 +1603,10 @@ err_out:
  *	@tmout_pat: impatience timeout
  *	@tmout: overall timeout
  *
- *	LOCKING:
+ *	Sleep until ATA Status register bit BSY clears,
+ *	or a timeout occurs.
+ *
+ *	LOCKING: None.
  *
  */
 
@@ -1553,10 +1692,14 @@ static void ata_bus_post_reset(struct ata_port *ap, unsigned int devmask)
 }
 
 /**
- *	ata_bus_edd -
- *	@ap:
+ *	ata_bus_edd - Issue EXECUTE DEVICE DIAGNOSTIC command.
+ *	@ap: Port to reset and probe
+ *
+ *	Use the EXECUTE DEVICE DIAGNOSTIC command to reset and
+ *	probe the bus.  Not often used these days.
  *
  *	LOCKING:
+ *	PCI/etc. bus probe sem.
  *
  */
 
@@ -1633,8 +1776,8 @@ static unsigned int ata_bus_softreset(struct ata_port *ap,
  *	the device is ATA or ATAPI.
  *
  *	LOCKING:
- *	Inherited from caller.  Some functions called by this function
- *	obtain the host_set lock.
+ *	PCI/etc. bus probe sem.
+ *	Obtains host_set lock.
  *
  *	SIDE EFFECTS:
  *	Sets ATA_FLAG_PORT_DISABLED if bus reset fails.
@@ -1876,7 +2019,11 @@ static int fgb(u32 bitmap)
  *	@xfer_mode_out: (output) SET FEATURES - XFER MODE code
  *	@xfer_shift_out: (output) bit shift that selects this mode
  *
+ *	Based on host and device capabilities, determine the
+ *	maximum transfer mode that is amenable to all.
+ *
  *	LOCKING:
+ *	PCI/etc. bus probe sem.
  *
  *	RETURNS:
  *	Zero on success, negative on error.
@@ -1909,7 +2056,11 @@ static int ata_choose_xfer_mode(struct ata_port *ap,
  *	@ap: Port associated with device @dev
  *	@dev: Device to which command will be sent
  *
+ *	Issue SET FEATURES - XFER MODE command to device @dev
+ *	on port @ap.
+ *
  *	LOCKING:
+ *	PCI/etc. bus probe sem.
  */
 
 static void ata_dev_set_xfermode(struct ata_port *ap, struct ata_device *dev)
@@ -1947,10 +2098,13 @@ static void ata_dev_set_xfermode(struct ata_port *ap, struct ata_device *dev)
 }
 
 /**
- *	ata_sg_clean -
- *	@qc:
+ *	ata_sg_clean - Unmap DMA memory associated with command
+ *	@qc: Command containing DMA memory to be released
+ *
+ *	Unmap all mapped DMA memory associated with this command.
  *
  *	LOCKING:
+ *	spin_lock_irqsave(host_set lock)
  */
 
 static void ata_sg_clean(struct ata_queued_cmd *qc)
@@ -1981,7 +2135,11 @@ static void ata_sg_clean(struct ata_queued_cmd *qc)
  *	ata_fill_sg - Fill PCI IDE PRD table
  *	@qc: Metadata associated with taskfile to be transferred
  *
+ *	Fill PCI IDE PRD (scatter-gather) table with segments
+ *	associated with the current disk command.
+ *
  *	LOCKING:
+ *	spin_lock_irqsave(host_set lock)
  *
  */
 static void ata_fill_sg(struct ata_queued_cmd *qc)
@@ -2028,7 +2186,13 @@ static void ata_fill_sg(struct ata_queued_cmd *qc)
  *	ata_check_atapi_dma - Check whether ATAPI DMA can be supported
  *	@qc: Metadata associated with taskfile to check
  *
+ *	Allow low-level driver to filter ATA PACKET commands, returning
+ *	a status indicating whether or not it is OK to use DMA for the
+ *	supplied PACKET command.
+ *
  *	LOCKING:
+ *	spin_lock_irqsave(host_set lock)
+ *
  *	RETURNS: 0 when ATAPI DMA can be used
  *               nonzero otherwise
  */
@@ -2046,6 +2210,8 @@ int ata_check_atapi_dma(struct ata_queued_cmd *qc)
  *	ata_qc_prep - Prepare taskfile for submission
  *	@qc: Metadata associated with taskfile to be prepared
  *
+ *	Prepare ATA taskfile for submission.
+ *
  *	LOCKING:
  *	spin_lock_irqsave(host_set lock)
  */
@@ -2057,6 +2223,32 @@ void ata_qc_prep(struct ata_queued_cmd *qc)
 	ata_fill_sg(qc);
 }
 
+/**
+ *	ata_sg_init_one - Associate command with memory buffer
+ *	@qc: Command to be associated
+ *	@buf: Memory buffer
+ *	@buflen: Length of memory buffer, in bytes.
+ *
+ *	Initialize the data-related elements of queued_cmd @qc
+ *	to point to a single memory buffer, @buf of byte length @buflen.
+ *
+ *	LOCKING:
+ *	spin_lock_irqsave(host_set lock)
+ */
+
+
+
+/**
+ *	ata_sg_init_one - Prepare a one-entry scatter-gather list.
+ *	@qc:  Queued command
+ *	@buf:  transfer buffer
+ *	@buflen:  length of buf
+ *
+ *	Builds a single-entry scatter-gather list to initiate a
+ *	transfer utilizing the specified buffer.
+ *
+ *	LOCKING:
+ */
 void ata_sg_init_one(struct ata_queued_cmd *qc, void *buf, unsigned int buflen)
 {
 	struct scatterlist *sg;
@@ -2074,6 +2266,32 @@ void ata_sg_init_one(struct ata_queued_cmd *qc, void *buf, unsigned int buflen)
 	sg->length = buflen;
 }
 
+/**
+ *	ata_sg_init - Associate command with scatter-gather table.
+ *	@qc: Command to be associated
+ *	@sg: Scatter-gather table.
+ *	@n_elem: Number of elements in s/g table.
+ *
+ *	Initialize the data-related elements of queued_cmd @qc
+ *	to point to a scatter-gather table @sg, containing @n_elem
+ *	elements.
+ *
+ *	LOCKING:
+ *	spin_lock_irqsave(host_set lock)
+ */
+
+
+/**
+ *	ata_sg_init - Assign a scatter gather list to a queued command
+ *	@qc:  Queued command
+ *	@sg:  Scatter-gather list
+ *	@n_elem:  length of sg list
+ *
+ *	Attaches a scatter-gather list to a queued command.
+ *
+ *	LOCKING:
+ */
+
 void ata_sg_init(struct ata_queued_cmd *qc, struct scatterlist *sg,
 		 unsigned int n_elem)
 {
@@ -2083,14 +2301,16 @@ void ata_sg_init(struct ata_queued_cmd *qc, struct scatterlist *sg,
 }
 
 /**
- *	ata_sg_setup_one -
- *	@qc:
+ *	ata_sg_setup_one - DMA-map the memory buffer associated with a command.
+ *	@qc: Command with memory buffer to be mapped.
+ *
+ *	DMA-map the memory buffer associated with queued_cmd @qc.
  *
  *	LOCKING:
  *	spin_lock_irqsave(host_set lock)
  *
  *	RETURNS:
- *
+ *	Zero on success, negative on error.
  */
 
 static int ata_sg_setup_one(struct ata_queued_cmd *qc)
@@ -2115,13 +2335,16 @@ static int ata_sg_setup_one(struct ata_queued_cmd *qc)
 }
 
 /**
- *	ata_sg_setup -
- *	@qc:
+ *	ata_sg_setup - DMA-map the scatter-gather table associated with a command.
+ *	@qc: Command with scatter-gather table to be mapped.
+ *
+ *	DMA-map the scatter-gather table associated with queued_cmd @qc.
  *
  *	LOCKING:
  *	spin_lock_irqsave(host_set lock)
  *
  *	RETURNS:
+ *	Zero on success, negative on error.
  *
  */
 
@@ -2151,6 +2374,7 @@ static int ata_sg_setup(struct ata_queued_cmd *qc)
  *	@ap:
  *
  *	LOCKING:
+ *	None.  (executing in kernel thread context)
  *
  *	RETURNS:
  *
@@ -2198,6 +2422,7 @@ static unsigned long ata_pio_poll(struct ata_port *ap)
  *	@ap:
  *
  *	LOCKING:
+ *	None.  (executing in kernel thread context)
  */
 
 static void ata_pio_complete (struct ata_port *ap)
@@ -2240,6 +2465,18 @@ static void ata_pio_complete (struct ata_port *ap)
 	ata_qc_complete(qc, drv_stat);
 }
 
+
+/**
+ *	swap_buf_le16 -
+ *	@buf:  Buffer to swap
+ *	@buf_words:  Number of 16-bit words in buffer.
+ *
+ *	Swap halves of 16-bit words if needed to convert from
+ *	little-endian byte order to native cpu byte order, or
+ *	vice-versa.
+ *
+ *	LOCKING:
+ */
 void swap_buf_le16(u16 *buf, unsigned int buf_words)
 {
 #ifdef __BIG_ENDIAN
@@ -2415,6 +2652,7 @@ err_out:
  *	@ap:
  *
  *	LOCKING:
+ *	None.  (executing in kernel thread context)
  */
 
 static void ata_pio_block(struct ata_port *ap)
@@ -2583,6 +2821,7 @@ static void atapi_request_sense(struct ata_port *ap, struct ata_device *dev,
  *	transaction completed successfully.
  *
  *	LOCKING:
+ *	Inherited from SCSI layer (none, can sleep)
  */
 
 static void ata_qc_timeout(struct ata_queued_cmd *qc)
@@ -2692,6 +2931,7 @@ out:
  *	@dev: Device from whom we request an available command structure
  *
  *	LOCKING:
+ *	None.
  */
 
 static struct ata_queued_cmd *ata_qc_new(struct ata_port *ap)
@@ -2717,6 +2957,7 @@ static struct ata_queued_cmd *ata_qc_new(struct ata_port *ap)
  *	@dev: Device from whom we request an available command structure
  *
  *	LOCKING:
+ *	None.
  */
 
 struct ata_queued_cmd *ata_qc_new_init(struct ata_port *ap,
@@ -2781,6 +3022,7 @@ static void __ata_qc_complete(struct ata_queued_cmd *qc)
  *	in case something prevents using it.
  *
  *	LOCKING:
+ *	spin_lock_irqsave(host_set lock)
  *
  */
 void ata_qc_free(struct ata_queued_cmd *qc)
@@ -2794,9 +3036,13 @@ void ata_qc_free(struct ata_queued_cmd *qc)
 /**
  *	ata_qc_complete - Complete an active ATA command
  *	@qc: Command to complete
- *	@drv_stat: ATA status register contents
+ *	@drv_stat: ATA Status register contents
+ *
+ *	Indicate to the mid and upper layers that an ATA
+ *	command has completed, with either an ok or not-ok status.
  *
  *	LOCKING:
+ *	spin_lock_irqsave(host_set lock)
  *
  */
 
@@ -2892,6 +3138,7 @@ err_out:
 	return -1;
 }
 
+
 /**
  *	ata_qc_issue_prot - issue taskfile to device in proto-dependent manner
  *	@qc: command to issue to device
@@ -2901,6 +3148,8 @@ err_out:
  *	classes called "protocols", and issuing each type of protocol
  *	is slightly different.
  *
+ *	May be used as the qc_issue() entry in ata_port_operations.
+ *
  *	LOCKING:
  *	spin_lock_irqsave(host_set lock)
  *
@@ -2958,7 +3207,7 @@ int ata_qc_issue_prot(struct ata_queued_cmd *qc)
 }
 
 /**
- *	ata_bmdma_setup - Set up PCI IDE BMDMA transaction
+ *	ata_bmdma_setup_mmio - Set up PCI IDE BMDMA transaction
  *	@qc: Info associated with this ATA transaction.
  *
  *	LOCKING:
@@ -3065,6 +3314,18 @@ static void ata_bmdma_start_pio (struct ata_queued_cmd *qc)
 	     ap->ioaddr.bmdma_addr + ATA_DMA_CMD);
 }
 
+
+/**
+ *	ata_bmdma_start - Start a PCI IDE BMDMA transaction
+ *	@qc: Info associated with this ATA transaction.
+ *
+ *	Writes the ATA_DMA_START flag to the DMA command register.
+ *
+ *	May be used as the bmdma_start() entry in ata_port_operations.
+ *
+ *	LOCKING:
+ *	spin_lock_irqsave(host_set lock)
+ */
 void ata_bmdma_start(struct ata_queued_cmd *qc)
 {
 	if (qc->ap->flags & ATA_FLAG_MMIO)
@@ -3073,6 +3334,20 @@ void ata_bmdma_start(struct ata_queued_cmd *qc)
 		ata_bmdma_start_pio(qc);
 }
 
+
+/**
+ *	ata_bmdma_setup - Set up PCI IDE BMDMA transaction
+ *	@qc: Info associated with this ATA transaction.
+ *
+ *	Writes address of PRD table to device's PRD Table Address
+ *	register, sets the DMA control register, and calls
+ *	ops->exec_command() to start the transfer.
+ *
+ *	May be used as the bmdma_setup() entry in ata_port_operations.
+ *
+ *	LOCKING:
+ *	spin_lock_irqsave(host_set lock)
+ */
 void ata_bmdma_setup(struct ata_queued_cmd *qc)
 {
 	if (qc->ap->flags & ATA_FLAG_MMIO)
@@ -3081,6 +3356,19 @@ void ata_bmdma_setup(struct ata_queued_cmd *qc)
 		ata_bmdma_setup_pio(qc);
 }
 
+
+/**
+ *	ata_bmdma_irq_clear - Clear PCI IDE BMDMA interrupt.
+ *	@ap: Port associated with this ATA transaction.
+ *
+ *	Clear interrupt and error flags in DMA status register.
+ *
+ *	May be used as the irq_clear() entry in ata_port_operations.
+ *
+ *	LOCKING:
+ *	spin_lock_irqsave(host_set lock)
+ */
+
 void ata_bmdma_irq_clear(struct ata_port *ap)
 {
     if (ap->flags & ATA_FLAG_MMIO) {
@@ -3093,6 +3381,19 @@ void ata_bmdma_irq_clear(struct ata_port *ap)
 
 }
 
+
+/**
+ *	ata_bmdma_status - Read PCI IDE BMDMA status
+ *	@ap: Port associated with this ATA transaction.
+ *
+ *	Read and return BMDMA status register.
+ *
+ *	May be used as the bmdma_status() entry in ata_port_operations.
+ *
+ *	LOCKING:
+ *	spin_lock_irqsave(host_set lock)
+ */
+
 u8 ata_bmdma_status(struct ata_port *ap)
 {
 	u8 host_stat;
@@ -3104,6 +3405,19 @@ u8 ata_bmdma_status(struct ata_port *ap)
 	return host_stat;
 }
 
+
+/**
+ *	ata_bmdma_stop - Stop PCI IDE BMDMA transfer
+ *	@ap: Port associated with this ATA transaction.
+ *
+ *	Clears the ATA_DMA_START flag in the dma control register
+ *
+ *	May be used as the bmdma_stop() entry in ata_port_operations.
+ *
+ *	LOCKING:
+ *	spin_lock_irqsave(host_set lock)
+ */
+
 void ata_bmdma_stop(struct ata_port *ap)
 {
 	if (ap->flags & ATA_FLAG_MMIO) {
@@ -3203,13 +3517,18 @@ idle_irq:
 
 /**
  *	ata_interrupt - Default ATA host interrupt handler
- *	@irq: irq line
- *	@dev_instance: pointer to our host information structure
+ *	@irq: irq line (unused)
+ *	@dev_instance: pointer to our ata_host_set information structure
  *	@regs: unused
  *
+ *	Default interrupt handler for PCI IDE devices.  Calls
+ *	ata_host_intr() for each port that is not disabled.
+ *
  *	LOCKING:
+ *	Obtains host_set lock during operation.
  *
  *	RETURNS:
+ *	IRQ_NONE or IRQ_HANDLED.
  *
  */
 
@@ -3302,6 +3621,19 @@ err_out:
 	ata_qc_complete(qc, ATA_ERR);
 }
 
+
+/**
+ *	ata_port_start - Set port up for dma.
+ *	@ap: Port to initialize
+ *
+ *	Called just after data structures for each port are
+ *	initialized.  Allocates space for PRD table.
+ *
+ *	May be used as the port_start() entry in ata_port_operations.
+ *
+ *	LOCKING:
+ */
+
 int ata_port_start (struct ata_port *ap)
 {
 	struct device *dev = ap->host_set->dev;
@@ -3315,6 +3647,18 @@ int ata_port_start (struct ata_port *ap)
 	return 0;
 }
 
+
+/**
+ *	ata_port_stop - Undo ata_port_start()
+ *	@ap: Port to shut down
+ *
+ *	Frees the PRD table.
+ *
+ *	May be used as the port_stop() entry in ata_port_operations.
+ *
+ *	LOCKING:
+ */
+
 void ata_port_stop (struct ata_port *ap)
 {
 	struct device *dev = ap->host_set->dev;
@@ -3357,7 +3701,11 @@ static void ata_host_remove(struct ata_port *ap, unsigned int do_unregister)
  *	@ent: Probe information provided by low-level driver
  *	@port_no: Port number associated with this ata_port
  *
+ *	Initialize a new ata_port structure, and its associated
+ *	scsi_host.
+ *
  *	LOCKING:
+ *	Inherited from caller.
  *
  */
 
@@ -3412,9 +3760,13 @@ static void ata_host_init(struct ata_port *ap, struct Scsi_Host *host,
  *	@host_set: Collections of ports to which we add
  *	@port_no: Port number associated with this host
  *
+ *	Attach low-level ATA driver to system.
+ *
  *	LOCKING:
+ *	PCI/etc. bus probe sem.
  *
  *	RETURNS:
+ *	New ata_port on success, for NULL on error.
  *
  */
 
@@ -3447,12 +3799,22 @@ err_out:
 }
 
 /**
- *	ata_device_add -
- *	@ent:
+ *	ata_device_add - Register hardware device with ATA and SCSI layers
+ *	@ent: Probe information describing hardware device to be registered
+ *
+ *	This function processes the information provided in the probe
+ *	information struct @ent, allocates the necessary ATA and SCSI
+ *	host information structures, initializes them, and registers
+ *	everything with requisite kernel subsystems.
+ *
+ *	This function requests irqs, probes the ATA bus, and probes
+ *	the SCSI bus.
  *
  *	LOCKING:
+ *	PCI/etc. bus probe sem.
  *
  *	RETURNS:
+ *	Number of ports registered.  Zero on error (no ports registered).
  *
  */
 
@@ -3604,7 +3966,15 @@ int ata_scsi_release(struct Scsi_Host *host)
 /**
  *	ata_std_ports - initialize ioaddr with standard port offsets.
  *	@ioaddr: IO address structure to be initialized
+ *
+ *	Utility function which initializes data_addr, error_addr,
+ *	feature_addr, nsect_addr, lbal_addr, lbam_addr, lbah_addr,
+ *	device_addr, status_addr, and command_addr to standard offsets
+ *	relative to cmd_addr.
+ *
+ *	Does not set ctl_addr, altstatus_addr, bmdma_addr, or scr_addr.
  */
+
 void ata_std_ports(struct ata_ioports *ioaddr)
 {
 	ioaddr->data_addr = ioaddr->cmd_addr + ATA_REG_DATA;
@@ -3646,6 +4016,20 @@ ata_probe_ent_alloc(struct device *dev, struct ata_port_info *port)
 	return probe_ent;
 }
 
+
+
+/**
+ *	ata_pci_init_native_mode - Initialize native-mode driver
+ *	@pdev:  pci device to be initialized
+ *	@port:  array[2] of pointers to port info structures.
+ *
+ *	Utility function which allocates and initializes an
+ *	ata_probe_ent structure for a standard dual-port
+ *	PIO-based IDE controller.  The returned ata_probe_ent
+ *	structure can be passed to ata_device_add().  The returned
+ *	ata_probe_ent structure should then be freed with kfree().
+ */
+
 #ifdef CONFIG_PCI
 struct ata_probe_ent *
 ata_pci_init_native_mode(struct pci_dev *pdev, struct ata_port_info **port)
@@ -3727,10 +4111,19 @@ ata_pci_init_legacy_mode(struct pci_dev *pdev, struct ata_port_info **port,
  *	@port_info: Information from low-level host driver
  *	@n_ports: Number of ports attached to host controller
  *
+ *	This is a helper function which can be called from a driver's
+ *	xxx_init_one() probe function if the hardware uses traditional
+ *	IDE taskfile registers.
+ *
+ *	This function calls pci_enable_device(), reserves its register
+ *	regions, sets the dma mask, enables bus master mode, and calls
+ *	ata_device_add()
+ *
  *	LOCKING:
  *	Inherited from PCI layer (may sleep).
  *
  *	RETURNS:
+ *	Zero on success, negative on errno-based value on error.
  *
  */
 
@@ -3949,15 +4342,6 @@ int pci_test_config_bits(struct pci_dev *pdev, struct pci_bits *bits)
 #endif /* CONFIG_PCI */
 
 
-/**
- *	ata_init -
- *
- *	LOCKING:
- *
- *	RETURNS:
- *
- */
-
 static int __init ata_init(void)
 {
 	ata_wq = create_workqueue("ata");
diff --git a/drivers/scsi/libata-scsi.c b/drivers/scsi/libata-scsi.c
index 416ba67ba9ee..7a4adc4c8f09 100644
--- a/drivers/scsi/libata-scsi.c
+++ b/drivers/scsi/libata-scsi.c
@@ -947,7 +947,7 @@ unsigned int ata_scsiop_inq_83(struct ata_scsi_args *args, u8 *rbuf,
 }
 
 /**
- *	ata_scsiop_noop -
+ *	ata_scsiop_noop - Command handler that simply returns success.
  *	@args: device IDENTIFY data / SCSI command of interest.
  *	@rbuf: Response buffer, to which simulated SCSI cmd output is sent.
  *	@buflen: Response buffer length.
diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c
index 579448222d69..3c97aa45772d 100644
--- a/drivers/scsi/qla2xxx/qla_os.c
+++ b/drivers/scsi/qla2xxx/qla_os.c
@@ -507,6 +507,7 @@ qla2xxx_eh_abort(struct scsi_cmnd *cmd)
 	int ret, i;
 	unsigned int id, lun;
 	unsigned long serial;
+	unsigned long flags;
 
 	if (!CMD_SP(cmd))
 		return FAILED;
@@ -519,7 +520,7 @@ qla2xxx_eh_abort(struct scsi_cmnd *cmd)
 
 	/* Check active list for command command. */
 	spin_unlock_irq(ha->host->host_lock);
-	spin_lock(&ha->hardware_lock);
+	spin_lock_irqsave(&ha->hardware_lock, flags);
 	for (i = 1; i < MAX_OUTSTANDING_COMMANDS; i++) {
 		sp = ha->outstanding_cmds[i];
 
@@ -534,7 +535,7 @@ qla2xxx_eh_abort(struct scsi_cmnd *cmd)
 		    sp->state));
 		DEBUG3(qla2x00_print_scsi_cmd(cmd);)
 
-		spin_unlock(&ha->hardware_lock);
+		spin_unlock_irqrestore(&ha->hardware_lock, flags);
 		if (qla2x00_abort_command(ha, sp)) {
 			DEBUG2(printk("%s(%ld): abort_command "
 			    "mbx failed.\n", __func__, ha->host_no));
@@ -543,20 +544,19 @@ qla2xxx_eh_abort(struct scsi_cmnd *cmd)
 			    "mbx success.\n", __func__, ha->host_no));
 			ret = SUCCESS;
 		}
-		spin_lock(&ha->hardware_lock);
+		spin_lock_irqsave(&ha->hardware_lock, flags);
 
 		break;
 	}
+	spin_unlock_irqrestore(&ha->hardware_lock, flags);
 
 	/* Wait for the command to be returned. */
 	if (ret == SUCCESS) {
-		spin_unlock(&ha->hardware_lock);
 		if (qla2x00_eh_wait_on_command(ha, cmd) != QLA_SUCCESS) {
 			qla_printk(KERN_ERR, ha, 
 			    "scsi(%ld:%d:%d): Abort handler timed out -- %lx "
 			    "%x.\n", ha->host_no, id, lun, serial, ret);
 		}
-		spin_lock(&ha->hardware_lock);
 	}
 	spin_lock_irq(ha->host->host_lock);
 
@@ -588,6 +588,7 @@ qla2x00_eh_wait_for_pending_target_commands(scsi_qla_host_t *ha, unsigned int t)
 	int	status;
 	srb_t		*sp;
 	struct scsi_cmnd *cmd;
+	unsigned long flags;
 
 	status = 0;
 
@@ -596,11 +597,11 @@ qla2x00_eh_wait_for_pending_target_commands(scsi_qla_host_t *ha, unsigned int t)
 	 * array
 	 */
 	for (cnt = 1; cnt < MAX_OUTSTANDING_COMMANDS; cnt++) {
-		spin_lock(&ha->hardware_lock);
+		spin_lock_irqsave(&ha->hardware_lock, flags);
 		sp = ha->outstanding_cmds[cnt];
 		if (sp) {
 			cmd = sp->cmd;
-			spin_unlock(&ha->hardware_lock);
+			spin_unlock_irqrestore(&ha->hardware_lock, flags);
 			if (cmd->device->id == t) {
 				if (!qla2x00_eh_wait_on_command(ha, cmd)) {
 					status = 1;
@@ -608,7 +609,7 @@ qla2x00_eh_wait_for_pending_target_commands(scsi_qla_host_t *ha, unsigned int t)
 				}
 			}
 		} else {
-			spin_unlock(&ha->hardware_lock);
+			spin_unlock_irqrestore(&ha->hardware_lock, flags);
 		}
 	}
 	return (status);
@@ -740,6 +741,7 @@ qla2x00_eh_wait_for_pending_commands(scsi_qla_host_t *ha)
 	int	status;
 	srb_t		*sp;
 	struct scsi_cmnd *cmd;
+	unsigned long flags;
 
 	status = 1;
 
@@ -748,17 +750,17 @@ qla2x00_eh_wait_for_pending_commands(scsi_qla_host_t *ha)
 	 * array
 	 */
 	for (cnt = 1; cnt < MAX_OUTSTANDING_COMMANDS; cnt++) {
-		spin_lock(&ha->hardware_lock);
+		spin_lock_irqsave(&ha->hardware_lock, flags);
 		sp = ha->outstanding_cmds[cnt];
 		if (sp) {
 			cmd = sp->cmd;
-			spin_unlock(&ha->hardware_lock);
+			spin_unlock_irqrestore(&ha->hardware_lock, flags);
 			status = qla2x00_eh_wait_on_command(ha, cmd);
 			if (status == 0)
 				break;
 		}
 		else {
-			spin_unlock(&ha->hardware_lock);
+			spin_unlock_irqrestore(&ha->hardware_lock, flags);
 		}
 	}
 	return (status);
diff --git a/drivers/scsi/scsi_scan.c b/drivers/scsi/scsi_scan.c
index cca772624ae7..8d0d302844a1 100644
--- a/drivers/scsi/scsi_scan.c
+++ b/drivers/scsi/scsi_scan.c
@@ -1197,6 +1197,7 @@ struct scsi_device *__scsi_add_device(struct Scsi_Host *shost, uint channel,
 	if (!starget)
 		return ERR_PTR(-ENOMEM);
 
+	get_device(&starget->dev);
 	down(&shost->scan_mutex);
 	res = scsi_probe_and_add_lun(starget, lun, NULL, &sdev, 1, hostdata);
 	if (res != SCSI_SCAN_LUN_PRESENT)
diff --git a/drivers/serial/vr41xx_siu.c b/drivers/serial/vr41xx_siu.c
index 5d2ceb623e6f..1f985327b0d4 100644
--- a/drivers/serial/vr41xx_siu.c
+++ b/drivers/serial/vr41xx_siu.c
@@ -234,7 +234,7 @@ static inline const char *siu_type_name(struct uart_port *port)
 		return "DSIU";
 	}
 
-	return "unknown";
+	return NULL;
 }
 
 static unsigned int siu_tx_empty(struct uart_port *port)
@@ -482,9 +482,6 @@ static irqreturn_t siu_interrupt(int irq, void *dev_id, struct pt_regs *regs)
 	struct uart_port *port;
 	uint8_t iir, lsr;
 
-	if (dev_id == NULL)
-		return IRQ_NONE;
-
 	port = (struct uart_port *)dev_id;
 
 	iir = siu_read(port, UART_IIR);
@@ -507,6 +504,9 @@ static int siu_startup(struct uart_port *port)
 {
 	int retval;
 
+	if (port->membase == NULL)
+		return -ENODEV;
+
 	siu_clear_fifo(port);
 
 	(void)siu_read(port, UART_LSR);
@@ -545,9 +545,6 @@ static void siu_shutdown(struct uart_port *port)
 	unsigned long flags;
 	uint8_t lcr;
 
-	if (port->membase == NULL)
-		return;
-
 	siu_write(port, UART_IER, 0);
 
 	spin_lock_irqsave(&port->lock, flags);
@@ -802,53 +799,6 @@ static int siu_init_ports(void)
 
 #ifdef CONFIG_SERIAL_VR41XX_CONSOLE
 
-static void early_set_termios(struct uart_port *port, struct termios *new,
-                              struct termios *old)
-{
-	tcflag_t c_cflag;
-	uint8_t lcr;
-	unsigned int baud, quot;
-
-	c_cflag = new->c_cflag;
-	switch (c_cflag & CSIZE) {
-	case CS5:
-		lcr = UART_LCR_WLEN5;
-		break;
-	case CS6:
-		lcr = UART_LCR_WLEN6;
-		break;
-	case CS7:
-		lcr = UART_LCR_WLEN7;
-		break;
-	default:
-		lcr = UART_LCR_WLEN8;
-		break;
-	}
-
-	if (c_cflag & CSTOPB)
-		lcr |= UART_LCR_STOP;
-	if (c_cflag & PARENB)
-		lcr |= UART_LCR_PARITY;
-	if ((c_cflag & PARODD) != PARODD)
-		lcr |= UART_LCR_EPAR;
-	if (c_cflag & CMSPAR)
-		lcr |= UART_LCR_SPAR;
-
-	baud = uart_get_baud_rate(port, new, old, 0, port->uartclk/16);
-	quot = uart_get_divisor(port, baud);
-
-	siu_write(port, UART_LCR, lcr | UART_LCR_DLAB);
-
-	siu_write(port, UART_DLL, (uint8_t)quot);
-	siu_write(port, UART_DLM, (uint8_t)(quot >> 8));
-
-	siu_write(port, UART_LCR, lcr);
-}
-
-static struct uart_ops early_uart_ops = {
-	.set_termios	= early_set_termios,
-};
-
 #define BOTH_EMPTY	(UART_LSR_TEMT | UART_LSR_THRE)
 
 static void wait_for_xmitr(struct uart_port *port)
@@ -915,7 +865,7 @@ static int siu_console_setup(struct console *con, char *options)
 	if (port->membase == NULL) {
 		if (port->mapbase == 0)
 			return -ENODEV;
-		port->membase = (unsigned char __iomem *)KSEG1ADDR(port->mapbase);
+		port->membase = ioremap(port->mapbase, siu_port_size(port));
 	}
 
 	vr41xx_select_siu_interface(SIU_INTERFACE_RS232C);
@@ -949,7 +899,7 @@ static int __devinit siu_console_init(void)
 
 	for (i = 0; i < num; i++) {
 		port = &siu_uart_ports[i];
-		port->ops = &early_uart_ops;
+		port->ops = &siu_uart_ops;
 	}
 
 	register_console(&siu_console);
@@ -994,8 +944,10 @@ static int siu_probe(struct device *dev)
 		port->dev = dev;
 
 		retval = uart_add_one_port(&siu_uart_driver, port);
-		if (retval)
+		if (retval < 0) {
+			port->dev = NULL;
 			break;
+		}
 	}
 
 	if (i == 0 && retval < 0) {
diff --git a/drivers/usb/core/sysfs.c b/drivers/usb/core/sysfs.c
index 4ab50009291d..4d0c9e65cd03 100644
--- a/drivers/usb/core/sysfs.c
+++ b/drivers/usb/core/sysfs.c
@@ -290,32 +290,30 @@ static ssize_t show_modalias(struct device *dev, char *buf)
 {
 	struct usb_interface *intf;
 	struct usb_device *udev;
+	int len;
 
 	intf = to_usb_interface(dev);
 	udev = interface_to_usbdev(intf);
-	if (udev->descriptor.bDeviceClass == 0) {
-		struct usb_host_interface *alt = intf->cur_altsetting;
 
-		return sprintf(buf, "usb:v%04Xp%04Xd%04Xdc%02Xdsc%02Xdp%02Xic%02Xisc%02Xip%02X\n",
+	len = sprintf(buf, "usb:v%04Xp%04Xd%04Xdc%02Xdsc%02Xdp%02Xic",
 			       le16_to_cpu(udev->descriptor.idVendor),
 			       le16_to_cpu(udev->descriptor.idProduct),
 			       le16_to_cpu(udev->descriptor.bcdDevice),
 			       udev->descriptor.bDeviceClass,
 			       udev->descriptor.bDeviceSubClass,
-			       udev->descriptor.bDeviceProtocol,
+			       udev->descriptor.bDeviceProtocol);
+	buf += len;
+
+	if (udev->descriptor.bDeviceClass == 0) {
+		struct usb_host_interface *alt = intf->cur_altsetting;
+
+		return len + sprintf(buf, "%02Xisc%02Xip%02X\n",
 			       alt->desc.bInterfaceClass,
 			       alt->desc.bInterfaceSubClass,
 			       alt->desc.bInterfaceProtocol);
  	} else {
-		return sprintf(buf, "usb:v%04Xp%04Xd%04Xdc%02Xdsc%02Xdp%02Xic*isc*ip*\n",
-			       le16_to_cpu(udev->descriptor.idVendor),
-			       le16_to_cpu(udev->descriptor.idProduct),
-			       le16_to_cpu(udev->descriptor.bcdDevice),
-			       udev->descriptor.bDeviceClass,
-			       udev->descriptor.bDeviceSubClass,
-			       udev->descriptor.bDeviceProtocol);
+		return len + sprintf(buf, "*isc*ip*\n");
 	}
-
 }
 static DEVICE_ATTR(modalias, S_IRUGO, show_modalias, NULL);
 
diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index 3196c3265ff5..19e598c9641f 100644
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -124,3 +124,14 @@ config USB_SL811_HCD
 	  To compile this driver as a module, choose M here: the
 	  module will be called sl811-hcd.
 
+config USB_SL811_CS
+	tristate "CF/PCMCIA support for SL811HS HCD"
+	depends on USB_SL811_HCD && PCMCIA
+	default N
+	help
+	  Wraps a PCMCIA driver around the SL811HS HCD, supporting the RATOC
+	  REX-CFU1U CF card (often used with PDAs).  If unsure, say N.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called "sl811_cs".
+
diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile
index a574ca06cf6b..5dbd3e7a27c7 100644
--- a/drivers/usb/host/Makefile
+++ b/drivers/usb/host/Makefile
@@ -7,4 +7,5 @@ obj-$(CONFIG_USB_EHCI_HCD)	+= ehci-hcd.o
 obj-$(CONFIG_USB_OHCI_HCD)	+= ohci-hcd.o
 obj-$(CONFIG_USB_UHCI_HCD)	+= uhci-hcd.o
 obj-$(CONFIG_USB_SL811_HCD)	+= sl811-hcd.o
+obj-$(CONFIG_USB_SL811_CS)	+= sl811_cs.o
 obj-$(CONFIG_ETRAX_ARCH_V10)	+= hc_crisv10.o
diff --git a/drivers/usb/host/sl811-hcd.c b/drivers/usb/host/sl811-hcd.c
index a374b7692073..99d43f758ad0 100644
--- a/drivers/usb/host/sl811-hcd.c
+++ b/drivers/usb/host/sl811-hcd.c
@@ -2,8 +2,8 @@
  * SL811HS HCD (Host Controller Driver) for USB.
  *
  * Copyright (C) 2004 Psion Teklogix (for NetBook PRO)
- * Copyright (C) 2004 David Brownell
- * 
+ * Copyright (C) 2004-2005 David Brownell
+ *
  * Periodic scheduling is based on Roman's OHCI code
  * 	Copyright (C) 1999 Roman Weissgaerber
  *
@@ -15,7 +15,7 @@
  * For documentation, see the SL811HS spec and the "SL811HS Embedded Host"
  * document (providing significant pieces missing from that spec); plus
  * the SL811S spec if you want peripheral side info.
- */ 
+ */
 
 /*
  * Status:  Passed basic stress testing, works with hubs, mice, keyboards,
@@ -67,7 +67,7 @@
 MODULE_DESCRIPTION("SL811HS USB Host Controller Driver");
 MODULE_LICENSE("GPL");
 
-#define DRIVER_VERSION	"15 Dec 2004"
+#define DRIVER_VERSION	"19 May 2005"
 
 
 #ifndef DEBUG
@@ -121,6 +121,10 @@ static void port_power(struct sl811 *sl811, int is_on)
 	/* reset as thoroughly as we can */
 	if (sl811->board && sl811->board->reset)
 		sl811->board->reset(hcd->self.controller);
+	else {
+		sl811_write(sl811, SL11H_CTLREG1, SL11H_CTL1MASK_SE0);
+		mdelay(20);
+	}
 
 	sl811_write(sl811, SL11H_IRQ_ENABLE, 0);
 	sl811_write(sl811, SL11H_CTLREG1, sl811->ctrl1);
@@ -443,6 +447,7 @@ static void finish_request(
 	spin_lock(&urb->lock);
 	if (urb->status == -EINPROGRESS)
 		urb->status = status;
+	urb->hcpriv = NULL;
 	spin_unlock(&urb->lock);
 
 	spin_unlock(&sl811->lock);
@@ -472,7 +477,7 @@ static void finish_request(
 		if (*prev)
 			*prev = ep->next;
 		sl811->load[i] -= ep->load;
-	}	
+	}
 	ep->branch = PERIODIC_SIZE;
 	sl811->periodic_count--;
 	sl811_to_hcd(sl811)->self.bandwidth_allocated
@@ -661,9 +666,9 @@ retry:
 
 #ifdef	QUIRK2
 	/* this may no longer be necessary ... */
-	if (irqstat == 0 && ret == IRQ_NONE) {
+	if (irqstat == 0) {
 		irqstat = checkdone(sl811);
-		if (irqstat /* && irq != ~0 */ )
+		if (irqstat)
 			sl811->stat_lost++;
 	}
 #endif
@@ -722,7 +727,8 @@ retry:
 		if (sl811->active_a) {
 			sl811_write(sl811, SL811_EP_A(SL11H_HOSTCTLREG), 0);
 			finish_request(sl811, sl811->active_a,
-				container_of(sl811->active_a->hep->urb_list.next,
+				container_of(sl811->active_a
+						->hep->urb_list.next,
 					struct urb, urb_list),
 				NULL, -ESHUTDOWN);
 			sl811->active_a = NULL;
@@ -731,7 +737,8 @@ retry:
 		if (sl811->active_b) {
 			sl811_write(sl811, SL811_EP_B(SL11H_HOSTCTLREG), 0);
 			finish_request(sl811, sl811->active_b,
-				container_of(sl811->active_b->hep->urb_list.next,
+				container_of(sl811->active_b
+						->hep->urb_list.next,
 					struct urb, urb_list),
 				NULL, -ESHUTDOWN);
 			sl811->active_b = NULL;
@@ -761,7 +768,7 @@ retry:
 			goto retry;
 	}
 
-	if (sl811->periodic_count == 0 && list_empty(&sl811->async)) 
+	if (sl811->periodic_count == 0 && list_empty(&sl811->async))
 		sofirq_off(sl811);
 	sl811_write(sl811, SL11H_IRQ_ENABLE, sl811->irq_enable);
 
@@ -796,7 +803,7 @@ static int balance(struct sl811 *sl811, u16 period, u16 load)
 			}
 			if (j < PERIODIC_SIZE)
 				continue;
-			branch = i; 
+			branch = i;
 		}
 	}
 	return branch;
@@ -890,6 +897,7 @@ static int sl811h_urb_enqueue(
 			break;
 		}
 
+		ep->hep = hep;
 		hep->hcpriv = ep;
 	}
 
@@ -961,15 +969,16 @@ fail:
 static int sl811h_urb_dequeue(struct usb_hcd *hcd, struct urb *urb)
 {
 	struct sl811		*sl811 = hcd_to_sl811(hcd);
-	struct usb_host_endpoint *hep = urb->hcpriv;
+	struct usb_host_endpoint *hep;
 	unsigned long		flags;
 	struct sl811h_ep	*ep;
 	int			retval = 0;
 
+	spin_lock_irqsave(&sl811->lock, flags);
+	hep = urb->hcpriv;
 	if (!hep)
-		return -EINVAL;
+		goto fail;
 
-	spin_lock_irqsave(&sl811->lock, flags);
 	ep = hep->hcpriv;
 	if (ep) {
 		/* finish right away if this urb can't be active ...
@@ -1017,6 +1026,7 @@ static int sl811h_urb_dequeue(struct usb_hcd *hcd, struct urb *urb)
 			VDBG("dequeue, urb %p active %s; wait4irq\n", urb,
 				(sl811->active_a == ep) ? "A" : "B");
 	} else
+fail:
 		retval = -EINVAL;
 	spin_unlock_irqrestore(&sl811->lock, flags);
 	return retval;
@@ -1576,6 +1586,9 @@ sl811h_start(struct usb_hcd *hcd)
 	if (sl811->board && sl811->board->power)
 		hub_set_power_budget(udev, sl811->board->power * 2);
 
+	/* enable power and interupts */
+	port_power(sl811, 1);
+
 	return 0;
 }
 
@@ -1618,7 +1631,7 @@ static struct hc_driver sl811h_hc_driver = {
 
 /*-------------------------------------------------------------------------*/
 
-static int __init_or_module
+static int __devexit
 sl811h_remove(struct device *dev)
 {
 	struct usb_hcd		*hcd = dev_get_drvdata(dev);
@@ -1631,21 +1644,20 @@ sl811h_remove(struct device *dev)
 	remove_debug_file(sl811);
 	usb_remove_hcd(hcd);
 
-	iounmap(sl811->data_reg);
+	/* some platforms may use IORESOURCE_IO */
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
-	release_mem_region(res->start, 1);
+	if (res)
+		iounmap(sl811->data_reg);
 
-	iounmap(sl811->addr_reg);
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	release_mem_region(res->start, 1);
+	if (res)
+		iounmap(sl811->addr_reg);
 
 	usb_put_hcd(hcd);
 	return 0;
 }
 
-#define resource_len(r) (((r)->end - (r)->start) + 1)
-
-static int __init
+static int __devinit
 sl811h_probe(struct device *dev)
 {
 	struct usb_hcd		*hcd;
@@ -1656,7 +1668,7 @@ sl811h_probe(struct device *dev)
 	void __iomem		*addr_reg;
 	void __iomem		*data_reg;
 	int			retval;
-	u8			tmp;
+	u8			tmp, ioaddr = 0;
 
 	/* basic sanity checks first.  board-specific init logic should
 	 * have initialized these three resources and probably board
@@ -1664,13 +1676,8 @@ sl811h_probe(struct device *dev)
 	 * minimal sanity checking.
 	 */
 	pdev = container_of(dev, struct platform_device, dev);
-	if (pdev->num_resources < 3)
-		return -ENODEV;
-
-	addr = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	data = platform_get_resource(pdev, IORESOURCE_MEM, 1);
 	irq = platform_get_irq(pdev, 0);
-	if (!addr || !data || irq < 0)
+	if (pdev->num_resources < 3 || irq < 0)
 		return -ENODEV;
 
 	/* refuse to confuse usbcore */
@@ -1679,24 +1686,31 @@ sl811h_probe(struct device *dev)
 		return -EINVAL;
 	}
 
-	if (!request_mem_region(addr->start, 1, hcd_name)) {
-		retval = -EBUSY;
-		goto err1;
-	}
-	addr_reg = ioremap(addr->start, resource_len(addr));
-	if (addr_reg == NULL) {
-		retval = -ENOMEM;
-		goto err2;
-	}
+	/* the chip may be wired for either kind of addressing */
+	addr = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	data = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+	retval = -EBUSY;
+	if (!addr || !data) {
+		addr = platform_get_resource(pdev, IORESOURCE_IO, 0);
+		data = platform_get_resource(pdev, IORESOURCE_IO, 1);
+		if (!addr || !data)
+			return -ENODEV;
+		ioaddr = 1;
+
+		addr_reg = (void __iomem *) addr->start;
+		data_reg = (void __iomem *) data->start;
+	} else {
+		addr_reg = ioremap(addr->start, 1);
+		if (addr_reg == NULL) {
+			retval = -ENOMEM;
+			goto err2;
+		}
 
-	if (!request_mem_region(data->start, 1, hcd_name)) {
-		retval = -EBUSY;
-		goto err3;
-	}
-	data_reg = ioremap(data->start, resource_len(addr));
-	if (data_reg == NULL) {
-		retval = -ENOMEM;
-		goto err4;
+		data_reg = ioremap(data->start, 1);
+		if (data_reg == NULL) {
+			retval = -ENOMEM;
+			goto err4;
+		}
 	}
 
 	/* allocate and initialize hcd */
@@ -1737,12 +1751,14 @@ sl811h_probe(struct device *dev)
 		goto err6;
 	}
 
-	/* sl811s would need a different handler for this irq */
-#ifdef	CONFIG_ARM
-	/* Cypress docs say the IRQ is IRQT_HIGH ... */
-	set_irq_type(irq, IRQT_RISING);
-#endif
-	retval = usb_add_hcd(hcd, irq, SA_INTERRUPT);
+	/* The chip's IRQ is level triggered, active high.  A requirement
+	 * for platform device setup is to cope with things like signal
+	 * inverters (e.g. CF is active low) or working only with edge
+	 * triggers (e.g. most ARM CPUs).  Initial driver stress testing
+	 * was on a system with single edge triggering, so most sorts of
+	 * triggering arrangement should work.
+	 */
+	retval = usb_add_hcd(hcd, irq, SA_INTERRUPT | SA_SHIRQ);
 	if (retval != 0)
 		goto err6;
 
@@ -1752,14 +1768,12 @@ sl811h_probe(struct device *dev)
  err6:
 	usb_put_hcd(hcd);
  err5:
-	iounmap(data_reg);
+	if (!ioaddr)
+		iounmap(data_reg);
  err4:
-	release_mem_region(data->start, 1);
- err3:
-	iounmap(addr_reg);
+	if (!ioaddr)
+		iounmap(addr_reg);
  err2:
-	release_mem_region(addr->start, 1);
- err1:
 	DBG("init error, %d\n", retval);
 	return retval;
 }
@@ -1767,7 +1781,7 @@ sl811h_probe(struct device *dev)
 #ifdef	CONFIG_PM
 
 /* for this device there's no useful distinction between the controller
- * and its root hub, except that the root hub only gets direct PM calls 
+ * and its root hub, except that the root hub only gets direct PM calls
  * when CONFIG_USB_SUSPEND is enabled.
  */
 
@@ -1821,20 +1835,22 @@ sl811h_resume(struct device *dev, u32 phase)
 #endif
 
 
-static struct device_driver sl811h_driver = {
+/* this driver is exported so sl811_cs can depend on it */
+struct device_driver sl811h_driver = {
 	.name =		(char *) hcd_name,
 	.bus =		&platform_bus_type,
 
 	.probe =	sl811h_probe,
-	.remove =	sl811h_remove,
+	.remove =	__devexit_p(sl811h_remove),
 
 	.suspend =	sl811h_suspend,
 	.resume =	sl811h_resume,
 };
+EXPORT_SYMBOL(sl811h_driver);
 
 /*-------------------------------------------------------------------------*/
- 
-static int __init sl811h_init(void) 
+
+static int __init sl811h_init(void)
 {
 	if (usb_disabled())
 		return -ENODEV;
@@ -1844,8 +1860,8 @@ static int __init sl811h_init(void)
 }
 module_init(sl811h_init);
 
-static void __exit sl811h_cleanup(void) 
-{	
+static void __exit sl811h_cleanup(void)
+{
 	driver_unregister(&sl811h_driver);
 }
 module_exit(sl811h_cleanup);
diff --git a/drivers/usb/host/sl811_cs.c b/drivers/usb/host/sl811_cs.c
new file mode 100644
index 000000000000..6e173265095c
--- /dev/null
+++ b/drivers/usb/host/sl811_cs.c
@@ -0,0 +1,442 @@
+/*
+ * PCMCIA driver for SL811HS (as found in REX-CFU1U)
+ * Filename: sl811_cs.c
+ * Author:   Yukio Yamamoto
+ *
+ *  Port to sl811-hcd and 2.6.x by
+ *    Botond Botyanszki <boti@rocketmail.com>
+ *    Simon Pickering
+ *
+ *  Last update: 2005-05-12
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/sched.h>
+#include <linux/ptrace.h>
+#include <linux/slab.h>
+#include <linux/string.h>
+#include <linux/timer.h>
+#include <linux/ioport.h>
+
+#include <pcmcia/version.h>
+#include <pcmcia/cs_types.h>
+#include <pcmcia/cs.h>
+#include <pcmcia/cistpl.h>
+#include <pcmcia/cisreg.h>
+#include <pcmcia/ds.h>
+
+#include <linux/usb_sl811.h>
+
+MODULE_AUTHOR("Botond Botyanszki");
+MODULE_DESCRIPTION("REX-CFU1U PCMCIA driver for 2.6");
+MODULE_LICENSE("GPL");
+
+
+/*====================================================================*/
+/* MACROS                                                             */
+/*====================================================================*/
+
+#if defined(DEBUG) || defined(CONFIG_USB_DEBUG) || defined(PCMCIA_DEBUG)
+
+static int pc_debug = 0;
+module_param(pc_debug, int, 0644);
+
+#define DBG(n, args...) if (pc_debug>(n)) printk(KERN_DEBUG "sl811_cs: " args)
+
+#else
+#define DBG(n, args...) do{}while(0)
+#endif	/* no debugging */
+
+#define INFO(args...) printk(KERN_INFO "sl811_cs: " args)
+
+#define INT_MODULE_PARM(n, v) static int n = v; module_param(n, int, 0444)
+
+#define CS_CHECK(fn, ret) \
+	do { \
+		last_fn = (fn); \
+		if ((last_ret = (ret)) != 0) \
+			goto cs_failed; \
+	} while (0)
+
+/*====================================================================*/
+/* VARIABLES                                                          */
+/*====================================================================*/
+
+static const char driver_name[DEV_NAME_LEN]  = "sl811_cs";
+
+static dev_link_t *dev_list = NULL;
+
+static int irq_list[4] = { -1 };
+static int irq_list_count;
+
+module_param_array(irq_list, int, &irq_list_count, 0444);
+
+INT_MODULE_PARM(irq_mask, 0xdeb8);
+
+typedef struct local_info_t {
+	dev_link_t		link;
+	dev_node_t		node;
+} local_info_t;
+
+/*====================================================================*/
+
+static void release_platform_dev(struct device * dev)
+{
+	DBG(0, "sl811_cs platform_dev release\n");
+	dev->parent = NULL;
+}
+
+static struct sl811_platform_data platform_data = {
+	.potpg		= 100,
+	.power		= 50,		/* == 100mA */
+	// .reset	= ... FIXME:  invoke CF reset on the card
+};
+
+static struct resource resources[] = {
+	[0] = {
+		.flags	= IORESOURCE_IRQ,
+	},
+	[1] = {
+		// .name   = "address",
+		.flags	= IORESOURCE_IO,
+	},
+	[2] = {
+		// .name   = "data",
+		.flags	= IORESOURCE_IO,
+	},
+};
+
+extern struct device_driver sl811h_driver;
+
+static struct platform_device platform_dev = {
+	.id			= -1,
+	.dev = {
+		.platform_data = &platform_data,
+		.release       = release_platform_dev,
+	},
+	.resource		= resources,
+	.num_resources		= ARRAY_SIZE(resources),
+};
+
+static int sl811_hc_init(struct device *parent, ioaddr_t base_addr, int irq)
+{
+	if (platform_dev.dev.parent)
+		return -EBUSY;
+	platform_dev.dev.parent = parent;
+
+	/* finish seting up the platform device */
+	resources[0].start = irq;
+
+	resources[1].start = base_addr;
+	resources[1].end = base_addr;
+
+	resources[2].start = base_addr + 1;
+	resources[2].end   = base_addr + 1;
+
+	/* The driver core will probe for us.  We know sl811-hcd has been
+	 * initialized already because of the link order dependency.
+	 */
+	platform_dev.name = sl811h_driver.name;
+	return platform_device_register(&platform_dev);
+}
+
+/*====================================================================*/
+
+static void sl811_cs_detach(dev_link_t *link)
+{
+	dev_link_t **linkp;
+
+	DBG(0, "sl811_cs_detach(0x%p)\n", link);
+
+	/* Locate device structure */
+	for (linkp = &dev_list; *linkp; linkp = &(*linkp)->next) {
+		if (*linkp == link)
+			break;
+	}
+	if (*linkp == NULL)
+		return;
+
+	/* Break the link with Card Services */
+	if (link->handle)
+		pcmcia_deregister_client(link->handle);
+
+	/* Unlink device structure, and free it */
+	*linkp = link->next;
+	/* This points to the parent local_info_t struct */
+	kfree(link->priv);
+}
+
+static void sl811_cs_release(dev_link_t * link)
+{
+
+	DBG(0, "sl811_cs_release(0x%p)\n", link);
+
+	if (link->open) {
+		DBG(1, "sl811_cs: release postponed, '%s' still open\n",
+		    link->dev->dev_name);
+		link->state |= DEV_STALE_CONFIG;
+		return;
+	}
+
+	/* Unlink the device chain */
+	link->dev = NULL;
+
+	platform_device_unregister(&platform_dev);
+	pcmcia_release_configuration(link->handle);
+	if (link->io.NumPorts1)
+		pcmcia_release_io(link->handle, &link->io);
+	if (link->irq.AssignedIRQ)
+		pcmcia_release_irq(link->handle, &link->irq);
+	link->state &= ~DEV_CONFIG;
+
+	if (link->state & DEV_STALE_LINK)
+		sl811_cs_detach(link);
+}
+
+static void sl811_cs_config(dev_link_t *link)
+{
+	client_handle_t		handle = link->handle;
+	struct device		*parent = &handle_to_dev(handle);
+	local_info_t		*dev = link->priv;
+	tuple_t			tuple;
+	cisparse_t		parse;
+	int			last_fn, last_ret;
+	u_char			buf[64];
+	config_info_t		conf;
+	cistpl_cftable_entry_t	dflt = { 0 };
+
+	DBG(0, "sl811_cs_config(0x%p)\n", link);
+
+	tuple.DesiredTuple = CISTPL_CONFIG;
+	tuple.Attributes = 0;
+	tuple.TupleData = buf;
+	tuple.TupleDataMax = sizeof(buf);
+	tuple.TupleOffset = 0;
+	CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(handle, &tuple));
+	CS_CHECK(GetTupleData, pcmcia_get_tuple_data(handle, &tuple));
+	CS_CHECK(ParseTuple, pcmcia_parse_tuple(handle, &tuple, &parse));
+	link->conf.ConfigBase = parse.config.base;
+	link->conf.Present = parse.config.rmask[0];
+
+	/* Configure card */
+	link->state |= DEV_CONFIG;
+
+	/* Look up the current Vcc */
+	CS_CHECK(GetConfigurationInfo,
+			pcmcia_get_configuration_info(handle, &conf));
+	link->conf.Vcc = conf.Vcc;
+
+	tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
+	CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(handle, &tuple));
+	while (1) {
+		cistpl_cftable_entry_t	*cfg = &(parse.cftable_entry);
+
+		if (pcmcia_get_tuple_data(handle, &tuple) != 0
+				|| pcmcia_parse_tuple(handle, &tuple, &parse)
+						!= 0)
+			goto next_entry;
+
+		if (cfg->flags & CISTPL_CFTABLE_DEFAULT) {
+			dflt = *cfg;
+		}
+
+		if (cfg->index == 0)
+			goto next_entry;
+
+		link->conf.ConfigIndex = cfg->index;
+
+		/* Use power settings for Vcc and Vpp if present */
+		/*  Note that the CIS values need to be rescaled */
+		if (cfg->vcc.present & (1<<CISTPL_POWER_VNOM)) {
+			if (cfg->vcc.param[CISTPL_POWER_VNOM]/10000
+					!= conf.Vcc)
+				goto next_entry;
+		} else if (dflt.vcc.present & (1<<CISTPL_POWER_VNOM)) {
+			if (dflt.vcc.param[CISTPL_POWER_VNOM]/10000
+					!= conf.Vcc)
+				goto next_entry;
+		}
+
+		if (cfg->vpp1.present & (1<<CISTPL_POWER_VNOM))
+			link->conf.Vpp1 = link->conf.Vpp2 =
+				cfg->vpp1.param[CISTPL_POWER_VNOM]/10000;
+		else if (dflt.vpp1.present & (1<<CISTPL_POWER_VNOM))
+			link->conf.Vpp1 = link->conf.Vpp2 =
+				dflt.vpp1.param[CISTPL_POWER_VNOM]/10000;
+
+		/* we need an interrupt */
+		if (cfg->irq.IRQInfo1 || dflt.irq.IRQInfo1)
+			link->conf.Attributes |= CONF_ENABLE_IRQ;
+
+		/* IO window settings */
+		link->io.NumPorts1 = link->io.NumPorts2 = 0;
+		if ((cfg->io.nwin > 0) || (dflt.io.nwin > 0)) {
+			cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt.io;
+
+			link->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
+			link->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK;
+			link->io.BasePort1 = io->win[0].base;
+			link->io.NumPorts1 = io->win[0].len;
+
+			if (pcmcia_request_io(link->handle, &link->io) != 0)
+				goto next_entry;
+		}
+		break;
+
+next_entry:
+		if (link->io.NumPorts1)
+			pcmcia_release_io(link->handle, &link->io);
+		last_ret = pcmcia_get_next_tuple(handle, &tuple);
+	}
+
+	/* require an IRQ and two registers */
+	if (!link->io.NumPorts1 || link->io.NumPorts1 < 2)
+		goto cs_failed;
+	if (link->conf.Attributes & CONF_ENABLE_IRQ)
+		CS_CHECK(RequestIRQ,
+			pcmcia_request_irq(link->handle, &link->irq));
+	else
+		goto cs_failed;
+
+	CS_CHECK(RequestConfiguration,
+		pcmcia_request_configuration(link->handle, &link->conf));
+
+	sprintf(dev->node.dev_name, driver_name);
+	dev->node.major = dev->node.minor = 0;
+	link->dev = &dev->node;
+
+	printk(KERN_INFO "%s: index 0x%02x: Vcc %d.%d",
+	       dev->node.dev_name, link->conf.ConfigIndex,
+	       link->conf.Vcc/10, link->conf.Vcc%10);
+	if (link->conf.Vpp1)
+		printk(", Vpp %d.%d", link->conf.Vpp1/10, link->conf.Vpp1%10);
+	printk(", irq %d", link->irq.AssignedIRQ);
+	printk(", io 0x%04x-0x%04x", link->io.BasePort1,
+	       link->io.BasePort1+link->io.NumPorts1-1);
+	printk("\n");
+
+	link->state &= ~DEV_CONFIG_PENDING;
+
+	if (sl811_hc_init(parent, link->io.BasePort1, link->irq.AssignedIRQ)
+			< 0) {
+cs_failed:
+		printk("sl811_cs_config failed\n");
+		cs_error(link->handle, last_fn, last_ret);
+		sl811_cs_release(link);
+		link->state &= ~DEV_CONFIG_PENDING;
+	}
+}
+
+static int
+sl811_cs_event(event_t event, int priority, event_callback_args_t *args)
+{
+	dev_link_t *link = args->client_data;
+
+	DBG(1, "sl811_cs_event(0x%06x)\n", event);
+
+	switch (event) {
+	case CS_EVENT_CARD_REMOVAL:
+		link->state &= ~DEV_PRESENT;
+		if (link->state & DEV_CONFIG)
+			sl811_cs_release(link);
+		break;
+
+	case CS_EVENT_CARD_INSERTION:
+		link->state |= DEV_PRESENT | DEV_CONFIG_PENDING;
+		sl811_cs_config(link);
+		break;
+
+	case CS_EVENT_PM_SUSPEND:
+		link->state |= DEV_SUSPEND;
+		/* Fall through... */
+	case CS_EVENT_RESET_PHYSICAL:
+		if (link->state & DEV_CONFIG)
+			pcmcia_release_configuration(link->handle);
+		break;
+
+	case CS_EVENT_PM_RESUME:
+		link->state &= ~DEV_SUSPEND;
+		/* Fall through... */
+	case CS_EVENT_CARD_RESET:
+		if (link->state & DEV_CONFIG)
+			pcmcia_request_configuration(link->handle, &link->conf);
+		DBG(0, "reset sl811-hcd here?\n");
+		break;
+	}
+	return 0;
+}
+
+static dev_link_t *sl811_cs_attach(void)
+{
+	local_info_t *local;
+	dev_link_t *link;
+	client_reg_t client_reg;
+	int ret, i;
+
+	local = kmalloc(sizeof(local_info_t), GFP_KERNEL);
+	if (!local)
+		return NULL;
+	memset(local, 0, sizeof(local_info_t));
+	link = &local->link;
+	link->priv = local;
+
+	/* Initialize */
+	link->irq.Attributes = IRQ_TYPE_EXCLUSIVE;
+	link->irq.IRQInfo1 = IRQ_INFO2_VALID|IRQ_LEVEL_ID;
+	if (irq_list[0] == -1)
+		link->irq.IRQInfo2 = irq_mask;
+	else
+		for (i = 0; i < irq_list_count; i++)
+			link->irq.IRQInfo2 |= 1 << irq_list[i];
+	link->irq.Handler = NULL;
+
+	link->conf.Attributes = 0;
+	link->conf.Vcc = 33;
+	link->conf.IntType = INT_MEMORY_AND_IO;
+
+	/* Register with Card Services */
+	link->next = dev_list;
+	dev_list = link;
+	client_reg.dev_info = (dev_info_t *) &driver_name;
+	client_reg.Attributes = INFO_IO_CLIENT | INFO_CARD_SHARE;
+	client_reg.EventMask =
+		CS_EVENT_CARD_INSERTION | CS_EVENT_CARD_REMOVAL |
+		CS_EVENT_RESET_PHYSICAL | CS_EVENT_CARD_RESET |
+		CS_EVENT_PM_SUSPEND | CS_EVENT_PM_RESUME;
+	client_reg.event_handler = &sl811_cs_event;
+	client_reg.Version = 0x0210;
+	client_reg.event_callback_args.client_data = link;
+	ret = pcmcia_register_client(&link->handle, &client_reg);
+	if (ret != CS_SUCCESS) {
+		cs_error(link->handle, RegisterClient, ret);
+		sl811_cs_detach(link);
+		return NULL;
+	}
+
+	return link;
+}
+
+static struct pcmcia_driver sl811_cs_driver = {
+	.owner		= THIS_MODULE,
+	.drv		= {
+		.name	= (char *)driver_name,
+	},
+	.attach		= sl811_cs_attach,
+	.detach		= sl811_cs_detach,
+};
+
+/*====================================================================*/
+
+static int __init init_sl811_cs(void)
+{
+	return pcmcia_register_driver(&sl811_cs_driver);
+}
+module_init(init_sl811_cs);
+
+static void __exit exit_sl811_cs(void)
+{
+	pcmcia_unregister_driver(&sl811_cs_driver);
+}
+module_exit(exit_sl811_cs);
diff --git a/drivers/usb/input/hid-core.c b/drivers/usb/input/hid-core.c
index 43215a981814..96959ec590a3 100644
--- a/drivers/usb/input/hid-core.c
+++ b/drivers/usb/input/hid-core.c
@@ -1318,6 +1318,8 @@ void hid_init_reports(struct hid_device *hid)
 #define USB_DEVICE_ID_WACOM_INTUOS2	0x0040
 #define USB_DEVICE_ID_WACOM_VOLITO	0x0060
 #define USB_DEVICE_ID_WACOM_PTU		0x0003
+#define USB_DEVICE_ID_WACOM_INTUOS3	0x00B0
+#define USB_DEVICE_ID_WACOM_CINTIQ	0x003F
 
 #define USB_VENDOR_ID_KBGEAR		0x084e
 #define USB_DEVICE_ID_KBGEAR_JAMSTUDIO	0x1001
@@ -1404,6 +1406,7 @@ void hid_init_reports(struct hid_device *hid)
 
 #define USB_VENDOR_ID_DELORME		0x1163
 #define USB_DEVICE_ID_DELORME_EARTHMATE 0x0100
+#define USB_DEVICE_ID_DELORME_EM_LT20	0x0200
 
 #define USB_VENDOR_ID_MCC		0x09db
 #define USB_DEVICE_ID_MCC_PMD1024LS	0x0076
@@ -1415,6 +1418,12 @@ void hid_init_reports(struct hid_device *hid)
 #define USB_VENDOR_ID_BTC		0x046e
 #define USB_DEVICE_ID_BTC_KEYBOARD	0x5303
 
+#define USB_VENDOR_ID_VERNIER		0x08f7
+#define USB_DEVICE_ID_VERNIER_LABPRO	0x0001
+#define USB_DEVICE_ID_VERNIER_GOTEMP	0x0002
+#define USB_DEVICE_ID_VERNIER_SKIP	0x0003
+#define USB_DEVICE_ID_VERNIER_CYCLOPS	0x0004
+
 
 /*
  * Alphabetically sorted blacklist by quirk type.
@@ -1440,6 +1449,7 @@ static struct hid_blacklist {
 	{ USB_VENDOR_ID_CODEMERCS, USB_DEVICE_ID_CODEMERCS_IOW28, HID_QUIRK_IGNORE },
 	{ USB_VENDOR_ID_CYPRESS, USB_DEVICE_ID_CYPRESS_HIDCOM, HID_QUIRK_IGNORE },
 	{ USB_VENDOR_ID_DELORME, USB_DEVICE_ID_DELORME_EARTHMATE, HID_QUIRK_IGNORE },
+	{ USB_VENDOR_ID_DELORME, USB_DEVICE_ID_DELORME_EM_LT20, HID_QUIRK_IGNORE },
 	{ USB_VENDOR_ID_ESSENTIAL_REALITY, USB_DEVICE_ID_ESSENTIAL_REALITY_P5, HID_QUIRK_IGNORE },
 	{ USB_VENDOR_ID_GLAB, USB_DEVICE_ID_4_PHIDGETSERVO_30, HID_QUIRK_IGNORE },
 	{ USB_VENDOR_ID_GLAB, USB_DEVICE_ID_1_PHIDGETSERVO_30, HID_QUIRK_IGNORE },
@@ -1459,6 +1469,10 @@ static struct hid_blacklist {
 	{ USB_VENDOR_ID_ONTRAK, USB_DEVICE_ID_ONTRAK_ADU100 + 300, HID_QUIRK_IGNORE },
 	{ USB_VENDOR_ID_ONTRAK, USB_DEVICE_ID_ONTRAK_ADU100 + 400, HID_QUIRK_IGNORE },
 	{ USB_VENDOR_ID_ONTRAK, USB_DEVICE_ID_ONTRAK_ADU100 + 500, HID_QUIRK_IGNORE },
+	{ USB_VENDOR_ID_VERNIER, USB_DEVICE_ID_VERNIER_LABPRO, HID_QUIRK_IGNORE },
+	{ USB_VENDOR_ID_VERNIER, USB_DEVICE_ID_VERNIER_GOTEMP, HID_QUIRK_IGNORE },
+	{ USB_VENDOR_ID_VERNIER, USB_DEVICE_ID_VERNIER_SKIP, HID_QUIRK_IGNORE },
+	{ USB_VENDOR_ID_VERNIER, USB_DEVICE_ID_VERNIER_CYCLOPS, HID_QUIRK_IGNORE },
 	{ USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_PENPARTNER, HID_QUIRK_IGNORE },
 	{ USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_GRAPHIRE, HID_QUIRK_IGNORE },
 	{ USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_GRAPHIRE + 1, HID_QUIRK_IGNORE },
@@ -1484,6 +1498,10 @@ static struct hid_blacklist {
 	{ USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_INTUOS2 + 7, HID_QUIRK_IGNORE },
 	{ USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_VOLITO, HID_QUIRK_IGNORE },
 	{ USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_PTU, HID_QUIRK_IGNORE },
+	{ USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_INTUOS3, HID_QUIRK_IGNORE },
+	{ USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_INTUOS3 + 1, HID_QUIRK_IGNORE },
+	{ USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_INTUOS3 + 2, HID_QUIRK_IGNORE },
+	{ USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_CINTIQ, HID_QUIRK_IGNORE },
 	{ USB_VENDOR_ID_WISEGROUP, USB_DEVICE_ID_4_PHIDGETSERVO_20, HID_QUIRK_IGNORE },
 	{ USB_VENDOR_ID_WISEGROUP, USB_DEVICE_ID_1_PHIDGETSERVO_20, HID_QUIRK_IGNORE },
 
diff --git a/drivers/usb/media/pwc/ChangeLog b/drivers/usb/media/pwc/ChangeLog
deleted file mode 100644
index b2eb71a9afb5..000000000000
--- a/drivers/usb/media/pwc/ChangeLog
+++ /dev/null
@@ -1,143 +0,0 @@
-9.0.2
-
-* Adding #ifdef to compile PWC before and after 2.6.5
-
-9.0.1
-
-9.0
-
-
-8.12
-
-* Implement motorized pan/tilt feature for Logitech QuickCam Orbit/Spere.
-
-8.11.1
-
-* Fix for PCVC720/40, would not be able to set videomode
-* Fix for Samsung MPC models, appearantly they are based on a newer chipset
-
-8.11
-
-* 20 dev_hints (per request)
-* Hot unplugging should be better, no more dangling pointers or memory leaks
-* Added reserved Logitech webcam IDs
-* Device now remembers size & fps between close()/open()
-* Removed palette stuff altogether
-
-8.10.1
-
-* Added IDs for PCVC720K/40 and Creative Labs Webcam Pro
-
-8.10
-
-* Fixed ID for QuickCam Notebook pro
-* Added GREALSIZE ioctl() call
-* Fixed bug in case PWCX was not loaded and invalid size was set
-
-8.9
-
-* Merging with kernel 2.5.49
-* Adding IDs for QuickCam Zoom & QuickCam Notebook
-
-8.8
-
-* Fixing 'leds' parameter
-* Adding IDs for Logitech QuickCam Pro 4000
-* Making URB init/cleanup a little nicer
-
-8.7
-
-* Incorporating changes in ioctl() parameter passing
-* Also changes to URB mechanism
-
-8.6
-
-* Added ID's for Visionite VCS UM100 and UC300
-* Removed YUV420-interlaced palette altogether (was confusing)
-* Removed MIRROR stuff as it didn't work anyway
-* Fixed a problem with the 'leds' parameter (wouldn't blink)
-* Added ioctl()s for advanced features: 'extended' whitebalance ioctl()s,
-  CONTOUR, BACKLIGHT, FLICKER, DYNNOISE.
-* VIDIOCGCAP.name now contains real camera model name instead of
-  'Philips xxx webcam'
-* Added PROBE ioctl (see previous point & API doc)
-
-8.5
-
-* Adding IDs for Creative Labs Webcam 5
-* Adding IDs for SOTEC CMS-001 webcam
-* Solving possible hang in VIDIOCSYNC when unplugging the cam 
-* Forgot to return structure in VIDIOCPWCGAWB, oops
-* Time interval for the LEDs are now in milliseconds
-
-8.4
-
-* Fixing power_save option for Vesta range
-* Handling new error codes in ISOC callback
-* Adding dev_hint module parameter, to specify /dev/videoX device nodes
-
-8.3
-
-* Adding Samsung C10 and C30 cameras
-* Removing palette module parameter
-* Fixed typo in ID of QuickCam 3000 Pro
-* Adding LED settings (blinking while in use) for ToUCam cameras.
-* Turns LED off when camera is not in use.
-
-8.2
-
-* Making module more silent when trace = 0 
-* Adding QuickCam 3000 Pro IDs
-* Chrominance control for the Vesta cameras
-* Hopefully fixed problems on machines with BIGMEM and > 1GB of RAM
-* Included Oliver Neukem's lock_kernel() patch
-* Allocates less memory for image buffers
-* Adds ioctl()s for the whitebalancing
-
-8.1
-
-* Adding support for 750
-* Adding V4L GAUDIO/SAUDIO/UNIT ioctl() calls
-
-8.0
-* 'damage control' after inclusion in 2.4.5.
-* Changed wait-queue mechanism in read/mmap/poll according to the book.
-* Included YUV420P palette.
-* Changed interface to decompressor module.
-* Cleaned up pwc structure a bit.
-
-7.0
-
-* Fixed bug in vcvt_420i_yuyv; extra variables on stack were misaligned.
-* There is now a clear error message when an image size is selected that
-  is only supported using the decompressor, and the decompressor isn't
-  loaded.
-* When the decompressor wasn't loaded, selecting large image size
-  would create skewed or double images.
-
-6.3
-
-* Introduced spinlocks for the buffer pointer manipulation; a number of
-  reports seem to suggest the down()/up() semaphores were the cause of
-  lockups, since they are not suitable for interrupt/user locking.
-* Separated decompressor and core code into 2 modules.
-
-6.2
-
-* Non-integral image sizes are now padded with gray or black.
-* Added SHUTTERSPEED ioctl().
-* Fixed buglet in VIDIOCPWCSAGC; the function would always return an error,
-  even though the call succeeded.
-* Added hotplug support for 2.4.*.
-* Memory: the 645/646 uses less memory now.
-
-6.1
-
-* VIDIOCSPICT returns -EINVAL with invalid palettes.
-* Added saturation control.
-* Split decompressors from rest.
-* Fixed bug that would reset the framerate to the default framerate if 
-  the rate field was set to 0 (which is not what I intended, nl. do not 
-  change the framerate!).
-* VIDIOCPWCSCQUAL (setting compression quality) now takes effect immediately.
-* Workaround for a bug in the 730 sensor.
diff --git a/drivers/usb/net/usbnet.c b/drivers/usb/net/usbnet.c
index 85476e76b244..4cbb408af727 100644
--- a/drivers/usb/net/usbnet.c
+++ b/drivers/usb/net/usbnet.c
@@ -2765,7 +2765,7 @@ static int blan_mdlm_bind (struct usbnet *dev, struct usb_interface *intf)
 			}
 			/* expect bcdVersion 1.0, ignore */
 			if (memcmp(&desc->bGUID, blan_guid, 16)
-				    && memcmp(&desc->bGUID, blan_guid, 16) ) {
+				    && memcmp(&desc->bGUID, safe_guid, 16) ) {
 				/* hey, this one might _really_ be MDLM! */
 				dev_dbg (&intf->dev, "MDLM guid\n");
 				goto bad_desc;
diff --git a/drivers/usb/serial/Kconfig b/drivers/usb/serial/Kconfig
index bc798edf0358..9438909e87a5 100644
--- a/drivers/usb/serial/Kconfig
+++ b/drivers/usb/serial/Kconfig
@@ -455,6 +455,17 @@ config USB_SERIAL_XIRCOM
 	  To compile this driver as a module, choose M here: the
 	  module will be called keyspan_pda.
 
+config USB_SERIAL_OPTION
+	tristate "USB Option PCMCIA serial driver"
+	depends on USB_SERIAL && USB_OHCI_HCD && PCCARD
+	help
+	  Say Y here if you want to use an Option card. This is a
+	  GSM card, controlled by three serial ports which are connected
+	  via an OHCI adapter located on a PC card.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called option.
+
 config USB_SERIAL_OMNINET
 	tristate "USB ZyXEL omni.net LCD Plus Driver (EXPERIMENTAL)"
 	depends on USB_SERIAL && EXPERIMENTAL
diff --git a/drivers/usb/serial/Makefile b/drivers/usb/serial/Makefile
index d56ff6d86cce..6c7cdcc99a9e 100644
--- a/drivers/usb/serial/Makefile
+++ b/drivers/usb/serial/Makefile
@@ -32,6 +32,7 @@ obj-$(CONFIG_USB_SERIAL_KLSI)			+= kl5kusb105.o
 obj-$(CONFIG_USB_SERIAL_KOBIL_SCT)		+= kobil_sct.o
 obj-$(CONFIG_USB_SERIAL_MCT_U232)		+= mct_u232.o
 obj-$(CONFIG_USB_SERIAL_OMNINET)		+= omninet.o
+obj-$(CONFIG_USB_SERIAL_OPTION)			+= option.o
 obj-$(CONFIG_USB_SERIAL_PL2303)			+= pl2303.o
 obj-$(CONFIG_USB_SERIAL_SAFE)			+= safe_serial.o
 obj-$(CONFIG_USB_SERIAL_TI)			+= ti_usb_3410_5052.o
diff --git a/drivers/usb/serial/cp2101.c b/drivers/usb/serial/cp2101.c
index 7e9bb63eb466..4ace9964fc6b 100644
--- a/drivers/usb/serial/cp2101.c
+++ b/drivers/usb/serial/cp2101.c
@@ -7,6 +7,14 @@
  *	modify it under the terms of the GNU General Public License version
  *	2 as published by the Free Software Foundation.
  *
+ * Support to set flow control line levels using TIOCMGET and TIOCMSET
+ * thanks to Karl Hiramoto karl@hiramoto.org. RTSCTS hardware flow
+ * control thanks to Munir Nassar nassarmu@real-time.com
+ *
+ * Outstanding Issues:
+ *  Buffers are not flushed when the port is opened.
+ *  Multiple calls to write() may fail with "Resource temporarily unavailable"
+ *
  */
 
 #include <linux/config.h>
@@ -24,7 +32,7 @@
 /*
  * Version Information
  */
-#define DRIVER_VERSION "v0.03"
+#define DRIVER_VERSION "v0.04"
 #define DRIVER_DESC "Silicon Labs CP2101/CP2102 RS232 serial adaptor driver"
 
 /*
@@ -35,6 +43,9 @@ static void cp2101_cleanup(struct usb_serial_port*);
 static void cp2101_close(struct usb_serial_port*, struct file*);
 static void cp2101_get_termios(struct usb_serial_port*);
 static void cp2101_set_termios(struct usb_serial_port*, struct termios*);
+static int cp2101_tiocmget (struct usb_serial_port *, struct file *);
+static int cp2101_tiocmset (struct usb_serial_port *, struct file *,
+		unsigned int, unsigned int);
 static void cp2101_break_ctl(struct usb_serial_port*, int);
 static int cp2101_startup (struct usb_serial *);
 static void cp2101_shutdown(struct usb_serial*);
@@ -43,9 +54,10 @@ static void cp2101_shutdown(struct usb_serial*);
 static int debug;
 
 static struct usb_device_id id_table [] = {
-	{USB_DEVICE(0x10c4, 0xea60) },	/*Silicon labs factory default*/
-	{USB_DEVICE(0x10ab, 0x10c5) },	/*Siemens MC60 Cable*/
-	{ } /* Terminating Entry*/
+	{ USB_DEVICE(0x10C4, 0xEA60) },	/* Silicon Labs factory default */
+	{ USB_DEVICE(0x10C4, 0x80CA) },	/* Degree Controls Inc */
+	{ USB_DEVICE(0x10AB, 0x10C5) },	/* Siemens MC60 Cable */
+	{ } /* Terminating Entry */
 };
 
 MODULE_DEVICE_TABLE (usb, id_table);
@@ -70,32 +82,35 @@ static struct usb_serial_device_type cp2101_device = {
 	.close			= cp2101_close,
 	.break_ctl		= cp2101_break_ctl,
 	.set_termios		= cp2101_set_termios,
+	.tiocmget 		= cp2101_tiocmget,
+	.tiocmset		= cp2101_tiocmset,
 	.attach			= cp2101_startup,
 	.shutdown		= cp2101_shutdown,
 };
 
-/*Config request types*/
+/* Config request types */
 #define REQTYPE_HOST_TO_DEVICE	0x41
 #define REQTYPE_DEVICE_TO_HOST	0xc1
 
-/*Config SET requests. To GET, add 1 to the request number*/
-#define CP2101_UART 		0x00	/*Enable / Disable*/
-#define CP2101_BAUDRATE		0x01	/*(BAUD_RATE_GEN_FREQ / baudrate)*/
-#define CP2101_BITS		0x03	/*0x(0)(data bits)(parity)(stop bits)*/
-#define CP2101_BREAK		0x05	/*On / Off*/
-#define CP2101_DTRRTS		0x07	/*101 / 202  ???*/
-#define CP2101_CONFIG_16	0x13	/*16 bytes of config data ???*/
-#define CP2101_CONFIG_6		0x19	/*6 bytes of config data ???*/
+/* Config SET requests. To GET, add 1 to the request number */
+#define CP2101_UART 		0x00	/* Enable / Disable */
+#define CP2101_BAUDRATE		0x01	/* (BAUD_RATE_GEN_FREQ / baudrate) */
+#define CP2101_BITS		0x03	/* 0x(0)(databits)(parity)(stopbits) */
+#define CP2101_BREAK		0x05	/* On / Off */
+#define CP2101_CONTROL		0x07	/* Flow control line states */
+#define CP2101_MODEMCTL		0x13	/* Modem controls */
+#define CP2101_CONFIG_6		0x19	/* 6 bytes of config data ??? */
 
-/*CP2101_UART*/
+/* CP2101_UART */
 #define UART_ENABLE		0x0001
 #define UART_DISABLE		0x0000
 
-/*CP2101_BAUDRATE*/
+/* CP2101_BAUDRATE */
 #define BAUD_RATE_GEN_FREQ	0x384000
 
-/*CP2101_BITS*/
+/* CP2101_BITS */
 #define BITS_DATA_MASK		0X0f00
+#define BITS_DATA_5		0X0500
 #define BITS_DATA_6		0X0600
 #define BITS_DATA_7		0X0700
 #define BITS_DATA_8		0X0800
@@ -112,64 +127,137 @@ static struct usb_serial_device_type cp2101_device = {
 #define BITS_STOP_1		0x0000
 #define BITS_STOP_1_5		0x0001
 #define BITS_STOP_2		0x0002
+
+/* CP2101_BREAK */
 #define BREAK_ON		0x0000
 #define BREAK_OFF		0x0001
 
+/* CP2101_CONTROL */
+#define CONTROL_DTR		0x0001
+#define CONTROL_RTS		0x0002
+#define CONTROL_CTS		0x0010
+#define CONTROL_DSR		0x0020
+#define CONTROL_RING		0x0040
+#define CONTROL_DCD		0x0080
+#define CONTROL_WRITE_DTR	0x0100
+#define CONTROL_WRITE_RTS	0x0200
 
-static int cp2101_get_config(struct usb_serial_port* port, u8 request)
+/*
+ * cp2101_get_config
+ * Reads from the CP2101 configuration registers
+ * 'size' is specified in bytes.
+ * 'data' is a pointer to a pre-allocated array of integers large
+ * enough to hold 'size' bytes (with 4 bytes to each integer)
+ */
+static int cp2101_get_config(struct usb_serial_port* port, u8 request,
+		unsigned int *data, int size)
 {
 	struct usb_serial *serial = port->serial;
-	unsigned char buf[4];
-	unsigned int value;
-	int result, i;
+	u32 *buf;
+	int result, i, length;
+
+	/* Number of integers required to contain the array */
+	length = (((size - 1) | 3) + 1)/4;
+
+	buf = kmalloc (length * sizeof(u32), GFP_KERNEL);
+	memset(buf, 0, length * sizeof(u32));
+
+	if (!buf) {
+		dev_err(&port->dev, "%s - out of memory.\n", __FUNCTION__);
+		return -ENOMEM;
+	}
 
-	/*For get requests, the request number must be incremented*/
+	/* For get requests, the request number must be incremented */
 	request++;
 
-	/*Issue the request, attempting to read 4 bytes*/
+	/* Issue the request, attempting to read 'size' bytes */
 	result = usb_control_msg (serial->dev,usb_rcvctrlpipe (serial->dev, 0),
 				request, REQTYPE_DEVICE_TO_HOST, 0x0000,
-				0, buf, 4, 300);
+				0, buf, size, 300);
 
-	if (result < 0) {
-		dev_err(&port->dev, "%s - Unable to send config request, "
-				"request=0x%x result=%d\n",
-				__FUNCTION__, request, result);
-		return result;
-	}
+	/* Convert data into an array of integers */
+	for (i=0; i<length; i++)
+		data[i] = le32_to_cpu(buf[i]);
 
-	/*Assemble each byte read into an integer value*/
-	value = 0;
-	for (i=0; i<4 && i<result; i++)
-		value |= (buf[i] << (i * 8));
+	kfree(buf);
 
-	dbg( " %s - request=0x%x result=%d value=0x%x",
-			__FUNCTION__, request, result, value);
+	if (result != size) {
+		dev_err(&port->dev, "%s - Unable to send config request, "
+				"request=0x%x size=%d result=%d\n",
+				__FUNCTION__, request, size, result);
+		return -EPROTO;
+	}
 
-	return value;
+	return 0;
 }
 
-static int cp2101_set_config(struct usb_serial_port* port, u8 request, u16 value)
+/*
+ * cp2101_set_config
+ * Writes to the CP2101 configuration registers
+ * Values less than 16 bits wide are sent directly
+ * 'size' is specified in bytes.
+ */
+static int cp2101_set_config(struct usb_serial_port* port, u8 request,
+		unsigned int *data, int size)
 {
 	struct usb_serial *serial = port->serial;
-	int result;
-	result = usb_control_msg (serial->dev, usb_sndctrlpipe(serial->dev, 0),
-			request, REQTYPE_HOST_TO_DEVICE, value,
-			0, NULL, 0, 300);
+	u32 *buf;
+	int result, i, length;
 
-	if (result <0) {
-		dev_err(&port->dev, "%s - Unable to send config request, "
-				"request=0x%x value=0x%x result=%d\n",
-				__FUNCTION__, request, value, result);
-		return result;
+	/* Number of integers required to contain the array */
+	length = (((size - 1) | 3) + 1)/4;
+
+	buf = kmalloc(length * sizeof(u32), GFP_KERNEL);
+	if (!buf) {
+		dev_err(&port->dev, "%s - out of memory.\n",
+				__FUNCTION__);
+		return -ENOMEM;
+	}
+
+	/* Array of integers into bytes */
+	for (i = 0; i < length; i++)
+		buf[i] = cpu_to_le32(data[i]);
+
+	if (size > 2) {
+		result = usb_control_msg (serial->dev,
+				usb_sndctrlpipe(serial->dev, 0),
+				request, REQTYPE_HOST_TO_DEVICE, 0x0000,
+				0, buf, size, 300);
+	} else {
+		result = usb_control_msg (serial->dev,
+				usb_sndctrlpipe(serial->dev, 0),
+				request, REQTYPE_HOST_TO_DEVICE, data[0],
+				0, NULL, 0, 300);
 	}
 
-	dbg(" %s - request=0x%x value=0x%x result=%d",
-			__FUNCTION__, request, value, result);
+	kfree(buf);
+
+	if ((size > 2 && result != size) || result < 0) {
+		dev_err(&port->dev, "%s - Unable to send request, "
+				"request=0x%x size=%d result=%d\n",
+				__FUNCTION__, request, size, result);
+		return -EPROTO;
+	}
 
+	/* Single data value */
+	result = usb_control_msg (serial->dev,
+			usb_sndctrlpipe(serial->dev, 0),
+			request, REQTYPE_HOST_TO_DEVICE, data[0],
+			0, NULL, 0, 300);
 	return 0;
 }
 
+/*
+ * cp2101_set_config_single
+ * Convenience function for calling cp2101_set_config on single data values
+ * without requiring an integer pointer
+ */
+static inline int cp2101_set_config_single(struct usb_serial_port* port,
+		u8 request, unsigned int data)
+{
+	return cp2101_set_config(port, request, &data, 2);
+}
+
 static int cp2101_open (struct usb_serial_port *port, struct file *filp)
 {
 	struct usb_serial *serial = port->serial;
@@ -177,7 +265,7 @@ static int cp2101_open (struct usb_serial_port *port, struct file *filp)
 
 	dbg("%s - port %d", __FUNCTION__, port->number);
 
-	if (cp2101_set_config(port, CP2101_UART, UART_ENABLE)) {
+	if (cp2101_set_config_single(port, CP2101_UART, UART_ENABLE)) {
 		dev_err(&port->dev, "%s - Unable to enable UART\n",
 				__FUNCTION__);
 		return -EPROTO;
@@ -198,9 +286,12 @@ static int cp2101_open (struct usb_serial_port *port, struct file *filp)
 		return result;
 	}
 
-	/*Configure the termios structure*/
+	/* Configure the termios structure */
 	cp2101_get_termios(port);
 
+	/* Set the DTR and RTS pins low */
+	cp2101_tiocmset(port, NULL, TIOCM_DTR | TIOCM_RTS, 0);
+
 	return 0;
 }
 
@@ -228,16 +319,18 @@ static void cp2101_close (struct usb_serial_port *port, struct file * filp)
 	usb_kill_urb(port->write_urb);
 	usb_kill_urb(port->read_urb);
 
-	cp2101_set_config(port, CP2101_UART, UART_DISABLE);
+	cp2101_set_config_single(port, CP2101_UART, UART_DISABLE);
 }
 
-/* cp2101_get_termios*/
-/* Reads the baud rate, data bits, parity and stop bits from the device*/
-/* Corrects any unsupported values*/
-/* Configures the termios structure to reflect the state of the device*/
+/*
+ * cp2101_get_termios
+ * Reads the baud rate, data bits, parity, stop bits and flow control mode
+ * from the device, corrects any unsupported values, and configures the
+ * termios structure to reflect the state of the device
+ */
 static void cp2101_get_termios (struct usb_serial_port *port)
 {
-	unsigned int cflag;
+	unsigned int cflag, modem_ctl[4];
 	int baud;
 	int bits;
 
@@ -249,15 +342,16 @@ static void cp2101_get_termios (struct usb_serial_port *port)
 	}
 	cflag = port->tty->termios->c_cflag;
 
-	baud = cp2101_get_config(port, CP2101_BAUDRATE);
-	/*Convert to baudrate*/
+	cp2101_get_config(port, CP2101_BAUDRATE, &baud, 2);
+	/* Convert to baudrate */
 	if (baud)
 		baud = BAUD_RATE_GEN_FREQ / baud;
 
 	dbg("%s - baud rate = %d", __FUNCTION__, baud);
 	cflag &= ~CBAUD;
 	switch (baud) {
-		/* The baud rates which are commented out below
+		/*
+		 * The baud rates which are commented out below
 		 * appear to be supported by the device
 		 * but are non-standard
 		 */
@@ -284,14 +378,18 @@ static void cp2101_get_termios (struct usb_serial_port *port)
 			dbg("%s - Baud rate is not supported, "
 					"using 9600 baud", __FUNCTION__);
 			cflag |= B9600;
-			cp2101_set_config(port, CP2101_BAUDRATE,
+			cp2101_set_config_single(port, CP2101_BAUDRATE,
 					(BAUD_RATE_GEN_FREQ/9600));
 			break;
 	}
 
-	bits = cp2101_get_config(port, CP2101_BITS);
+	cp2101_get_config(port, CP2101_BITS, &bits, 2);
 	cflag &= ~CSIZE;
 	switch(bits & BITS_DATA_MASK) {
+		case BITS_DATA_5:
+			dbg("%s - data bits = 5", __FUNCTION__);
+			cflag |= CS5;
+			break;
 		case BITS_DATA_6:
 			dbg("%s - data bits = 6", __FUNCTION__);
 			cflag |= CS6;
@@ -310,7 +408,7 @@ static void cp2101_get_termios (struct usb_serial_port *port)
 			cflag |= CS8;
 			bits &= ~BITS_DATA_MASK;
 			bits |= BITS_DATA_8;
-			cp2101_set_config(port, CP2101_BITS, bits);
+			cp2101_set_config(port, CP2101_BITS, &bits, 2);
 			break;
 		default:
 			dbg("%s - Unknown number of data bits, "
@@ -318,7 +416,7 @@ static void cp2101_get_termios (struct usb_serial_port *port)
 			cflag |= CS8;
 			bits &= ~BITS_DATA_MASK;
 			bits |= BITS_DATA_8;
-			cp2101_set_config(port, CP2101_BITS, bits);
+			cp2101_set_config(port, CP2101_BITS, &bits, 2);
 			break;
 	}
 
@@ -341,21 +439,21 @@ static void cp2101_get_termios (struct usb_serial_port *port)
 					"disabling parity)", __FUNCTION__);
 			cflag &= ~PARENB;
 			bits &= ~BITS_PARITY_MASK;
-			cp2101_set_config(port, CP2101_BITS, bits);
+			cp2101_set_config(port, CP2101_BITS, &bits, 2);
 			break;
 		case BITS_PARITY_SPACE:
 			dbg("%s - parity = SPACE (not supported, "
 					"disabling parity)", __FUNCTION__);
 			cflag &= ~PARENB;
 			bits &= ~BITS_PARITY_MASK;
-			cp2101_set_config(port, CP2101_BITS, bits);
+			cp2101_set_config(port, CP2101_BITS, &bits, 2);
 			break;
 		default:
 			dbg("%s - Unknown parity mode, "
 					"disabling parity", __FUNCTION__);
 			cflag &= ~PARENB;
 			bits &= ~BITS_PARITY_MASK;
-			cp2101_set_config(port, CP2101_BITS, bits);
+			cp2101_set_config(port, CP2101_BITS, &bits, 2);
 			break;
 	}
 
@@ -366,9 +464,9 @@ static void cp2101_get_termios (struct usb_serial_port *port)
 			break;
 		case BITS_STOP_1_5:
 			dbg("%s - stop bits = 1.5 (not supported, "
-					"using 1 stop bit", __FUNCTION__);
+					"using 1 stop bit)", __FUNCTION__);
 			bits &= ~BITS_STOP_MASK;
-			cp2101_set_config(port, CP2101_BITS, bits);
+			cp2101_set_config(port, CP2101_BITS, &bits, 2);
 			break;
 		case BITS_STOP_2:
 			dbg("%s - stop bits = 2", __FUNCTION__);
@@ -378,10 +476,19 @@ static void cp2101_get_termios (struct usb_serial_port *port)
 			dbg("%s - Unknown number of stop bits, "
 					"using 1 stop bit", __FUNCTION__);
 			bits &= ~BITS_STOP_MASK;
-			cp2101_set_config(port, CP2101_BITS, bits);
+			cp2101_set_config(port, CP2101_BITS, &bits, 2);
 			break;
 	}
 
+	cp2101_get_config(port, CP2101_MODEMCTL, modem_ctl, 16);
+	if (modem_ctl[0] & 0x0008) {
+		dbg("%s - flow control = CRTSCTS", __FUNCTION__);
+		cflag |= CRTSCTS;
+	} else {
+		dbg("%s - flow control = NONE", __FUNCTION__);
+		cflag &= ~CRTSCTS;
+	}
+
 	port->tty->termios->c_cflag = cflag;
 }
 
@@ -389,8 +496,8 @@ static void cp2101_set_termios (struct usb_serial_port *port,
 		struct termios *old_termios)
 {
 	unsigned int cflag, old_cflag=0;
-	int baud=0;
-	int bits;
+	int baud=0, bits;
+	unsigned int modem_ctl[4];
 
 	dbg("%s - port %d", __FUNCTION__, port->number);
 
@@ -400,7 +507,7 @@ static void cp2101_set_termios (struct usb_serial_port *port,
 	}
 	cflag = port->tty->termios->c_cflag;
 
-	/* check that they really want us to change something */
+	/* Check that they really want us to change something */
 	if (old_termios) {
 		if ((cflag == old_termios->c_cflag) &&
 				(RELEVANT_IFLAG(port->tty->termios->c_iflag)
@@ -415,7 +522,8 @@ static void cp2101_set_termios (struct usb_serial_port *port,
 	/* If the baud rate is to be updated*/
 	if ((cflag & CBAUD) != (old_cflag & CBAUD)) {
 		switch (cflag & CBAUD) {
-			/* The baud rates which are commented out below
+			/*
+			 * The baud rates which are commented out below
 			 * appear to be supported by the device
 			 * but are non-standard
 			 */
@@ -448,18 +556,22 @@ static void cp2101_set_termios (struct usb_serial_port *port,
 		if (baud) {
 			dbg("%s - Setting baud rate to %d baud", __FUNCTION__,
 					baud);
-			if (cp2101_set_config(port, CP2101_BAUDRATE,
+			if (cp2101_set_config_single(port, CP2101_BAUDRATE,
 						(BAUD_RATE_GEN_FREQ / baud)))
 				dev_err(&port->dev, "Baud rate requested not "
 						"supported by device\n");
 		}
 	}
 
-	/*If the number of data bits is to be updated*/
+	/* If the number of data bits is to be updated */
 	if ((cflag & CSIZE) != (old_cflag & CSIZE)) {
-		bits = cp2101_get_config(port, CP2101_BITS);
+		cp2101_get_config(port, CP2101_BITS, &bits, 2);
 		bits &= ~BITS_DATA_MASK;
 		switch (cflag & CSIZE) {
+			case CS5:
+				bits |= BITS_DATA_5;
+				dbg("%s - data bits = 5", __FUNCTION__);
+				break;
 			case CS6:
 				bits |= BITS_DATA_6;
 				dbg("%s - data bits = 6", __FUNCTION__);
@@ -483,13 +595,13 @@ static void cp2101_set_termios (struct usb_serial_port *port,
 				bits |= BITS_DATA_8;
 				break;
 		}
-		if (cp2101_set_config(port, CP2101_BITS, bits))
+		if (cp2101_set_config(port, CP2101_BITS, &bits, 2))
 			dev_err(&port->dev, "Number of data bits requested "
 					"not supported by device\n");
 	}
 
 	if ((cflag & (PARENB|PARODD)) != (old_cflag & (PARENB|PARODD))) {
-		bits = cp2101_get_config(port, CP2101_BITS);
+		cp2101_get_config(port, CP2101_BITS, &bits, 2);
 		bits &= ~BITS_PARITY_MASK;
 		if (cflag & PARENB) {
 			if (cflag & PARODD) {
@@ -500,13 +612,13 @@ static void cp2101_set_termios (struct usb_serial_port *port,
 				dbg("%s - parity = EVEN", __FUNCTION__);
 			}
 		}
-		if (cp2101_set_config(port, CP2101_BITS, bits))
+		if (cp2101_set_config(port, CP2101_BITS, &bits, 2))
 			dev_err(&port->dev, "Parity mode not supported "
 					"by device\n");
 	}
 
 	if ((cflag & CSTOPB) != (old_cflag & CSTOPB)) {
-		bits = cp2101_get_config(port, CP2101_BITS);
+		cp2101_get_config(port, CP2101_BITS, &bits, 2);
 		bits &= ~BITS_STOP_MASK;
 		if (cflag & CSTOPB) {
 			bits |= BITS_STOP_2;
@@ -515,15 +627,90 @@ static void cp2101_set_termios (struct usb_serial_port *port,
 			bits |= BITS_STOP_1;
 			dbg("%s - stop bits = 1", __FUNCTION__);
 		}
-		if (cp2101_set_config(port, CP2101_BITS, bits))
+		if (cp2101_set_config(port, CP2101_BITS, &bits, 2))
 			dev_err(&port->dev, "Number of stop bits requested "
 					"not supported by device\n");
 	}
+
+	if ((cflag & CRTSCTS) != (old_cflag & CRTSCTS)) {
+		cp2101_get_config(port, CP2101_MODEMCTL, modem_ctl, 16);
+		dbg("%s - read modem controls = 0x%.4x 0x%.4x 0x%.4x 0x%.4x",
+				__FUNCTION__, modem_ctl[0], modem_ctl[1],
+				modem_ctl[2], modem_ctl[3]);
+
+		if (cflag & CRTSCTS) {
+			modem_ctl[0] &= ~0x7B;
+			modem_ctl[0] |= 0x09;
+			modem_ctl[1] = 0x80;
+			dbg("%s - flow control = CRTSCTS", __FUNCTION__);
+		} else {
+			modem_ctl[0] &= ~0x7B;
+			modem_ctl[0] |= 0x01;
+			modem_ctl[1] |= 0x40;
+			dbg("%s - flow control = NONE", __FUNCTION__);
+		}
+
+		dbg("%s - write modem controls = 0x%.4x 0x%.4x 0x%.4x 0x%.4x",
+				__FUNCTION__, modem_ctl[0], modem_ctl[1],
+				modem_ctl[2], modem_ctl[3]);
+		cp2101_set_config(port, CP2101_MODEMCTL, modem_ctl, 16);
+	}
+
+}
+
+static int cp2101_tiocmset (struct usb_serial_port *port, struct file *file,
+		unsigned int set, unsigned int clear)
+{
+	int control = 0;
+
+	dbg("%s - port %d", __FUNCTION__, port->number);
+
+	if (set & TIOCM_RTS) {
+		control |= CONTROL_RTS;
+		control |= CONTROL_WRITE_RTS;
+	}
+	if (set & TIOCM_DTR) {
+		control |= CONTROL_DTR;
+		control |= CONTROL_WRITE_DTR;
+	}
+	if (clear & TIOCM_RTS) {
+		control &= ~CONTROL_RTS;
+		control |= CONTROL_WRITE_RTS;
+	}
+	if (clear & TIOCM_DTR) {
+		control &= ~CONTROL_DTR;
+		control |= CONTROL_WRITE_DTR;
+	}
+
+	dbg("%s - control = 0x%.4x", __FUNCTION__, control);
+
+	return cp2101_set_config(port, CP2101_CONTROL, &control, 2);
+
+}
+
+static int cp2101_tiocmget (struct usb_serial_port *port, struct file *file)
+{
+	int control, result;
+
+	dbg("%s - port %d", __FUNCTION__, port->number);
+
+	cp2101_get_config(port, CP2101_CONTROL, &control, 1);
+
+	result = ((control & CONTROL_DTR) ? TIOCM_DTR : 0)
+		|((control & CONTROL_RTS) ? TIOCM_RTS : 0)
+		|((control & CONTROL_CTS) ? TIOCM_CTS : 0)
+		|((control & CONTROL_DSR) ? TIOCM_DSR : 0)
+		|((control & CONTROL_RING)? TIOCM_RI  : 0)
+		|((control & CONTROL_DCD) ? TIOCM_CD  : 0);
+
+	dbg("%s - control = 0x%.2x", __FUNCTION__, control);
+
+	return result;
 }
 
 static void cp2101_break_ctl (struct usb_serial_port *port, int break_state)
 {
-	u16 state;
+	int state;
 
 	dbg("%s - port %d", __FUNCTION__, port->number);
 	if (break_state == 0)
@@ -532,12 +719,12 @@ static void cp2101_break_ctl (struct usb_serial_port *port, int break_state)
 		state = BREAK_ON;
 	dbg("%s - turning break %s", __FUNCTION__,
 			state==BREAK_OFF ? "off" : "on");
-	cp2101_set_config(port, CP2101_BREAK, state);
+	cp2101_set_config(port, CP2101_BREAK, &state, 2);
 }
 
 static int cp2101_startup (struct usb_serial *serial)
 {
-	/*CP2101 buffers behave strangely unless device is reset*/
+	/* CP2101 buffers behave strangely unless device is reset */
 	usb_reset_device(serial->dev);
 	return 0;
 }
@@ -548,7 +735,7 @@ static void cp2101_shutdown (struct usb_serial *serial)
 
 	dbg("%s", __FUNCTION__);
 
-	/* stop reads and writes on all ports */
+	/* Stop reads and writes on all ports */
 	for (i=0; i < serial->num_ports; ++i) {
 		cp2101_cleanup(serial->port[i]);
 	}
@@ -560,16 +747,16 @@ static int __init cp2101_init (void)
 
 	retval = usb_serial_register(&cp2101_device);
 	if (retval)
-		return retval; /*Failed to register*/
+		return retval; /* Failed to register */
 
 	retval = usb_register(&cp2101_driver);
 	if (retval) {
-		/*Failed to register*/
+		/* Failed to register */
 		usb_serial_deregister(&cp2101_device);
 		return retval;
 	}
 
-	/*Success*/
+	/* Success */
 	info(DRIVER_DESC " " DRIVER_VERSION);
 	return 0;
 }
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index 52394f08a947..051c3a77b41b 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -364,6 +364,7 @@ static struct usb_device_id id_table_8U232AM [] = {
 	{ USB_DEVICE_VER(FTDI_VID, PROTEGO_SPECIAL_3, 0, 0x3ff) },
 	{ USB_DEVICE_VER(FTDI_VID, PROTEGO_SPECIAL_4, 0, 0x3ff) },
 	{ USB_DEVICE_VER(FTDI_VID, FTDI_ELV_UO100_PID, 0, 0x3ff) },
+	{ USB_DEVICE_VER(FTDI_VID, FTDI_ELV_UM100_PID, 0, 0x3ff) },
 	{ USB_DEVICE_VER(FTDI_VID, INSIDE_ACCESSO, 0, 0x3ff) },
 	{ USB_DEVICE_VER(INTREPID_VID, INTREPID_VALUECAN_PID, 0, 0x3ff) },
 	{ USB_DEVICE_VER(INTREPID_VID, INTREPID_NEOVI_PID, 0, 0x3ff) },
@@ -475,6 +476,7 @@ static struct usb_device_id id_table_FT232BM [] = {
 	{ USB_DEVICE_VER(FTDI_VID, FTDI_GUDEADS_E88E_PID, 0x400, 0xffff) },
 	{ USB_DEVICE_VER(FTDI_VID, FTDI_GUDEADS_E88F_PID, 0x400, 0xffff) },
 	{ USB_DEVICE_VER(FTDI_VID, FTDI_ELV_UO100_PID, 0x400, 0xffff) },
+	{ USB_DEVICE_VER(FTDI_VID, FTDI_ELV_UM100_PID, 0x400, 0xffff) },
  	{ USB_DEVICE_VER(FTDI_VID, LINX_SDMUSBQSS_PID, 0x400, 0xffff) },
  	{ USB_DEVICE_VER(FTDI_VID, LINX_MASTERDEVEL2_PID, 0x400, 0xffff) },
  	{ USB_DEVICE_VER(FTDI_VID, LINX_FUTURE_0_PID, 0x400, 0xffff) },
@@ -618,6 +620,7 @@ static struct usb_device_id id_table_combined [] = {
 	{ USB_DEVICE_VER(FTDI_VID, FTDI_GUDEADS_E88E_PID, 0x400, 0xffff) },
 	{ USB_DEVICE_VER(FTDI_VID, FTDI_GUDEADS_E88F_PID, 0x400, 0xffff) },
 	{ USB_DEVICE(FTDI_VID, FTDI_ELV_UO100_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_ELV_UM100_PID) },
  	{ USB_DEVICE_VER(FTDI_VID, LINX_SDMUSBQSS_PID, 0x400, 0xffff) },
  	{ USB_DEVICE_VER(FTDI_VID, LINX_MASTERDEVEL2_PID, 0x400, 0xffff) },
  	{ USB_DEVICE_VER(FTDI_VID, LINX_FUTURE_0_PID, 0x400, 0xffff) },
diff --git a/drivers/usb/serial/ftdi_sio.h b/drivers/usb/serial/ftdi_sio.h
index a52bb13a9ce4..8866376823a5 100644
--- a/drivers/usb/serial/ftdi_sio.h
+++ b/drivers/usb/serial/ftdi_sio.h
@@ -144,6 +144,8 @@
 
 /* ELV USB Module UO100 (PID sent by Stefan Frings) */
 #define FTDI_ELV_UO100_PID	0xFB58	/* Product Id */
+/* ELV USB Module UM100 (PID sent by Arnim Laeuger) */
+#define FTDI_ELV_UM100_PID	0xFB5A	/* Product Id */
 
 /*
  * Definitions for ID TECH (www.idt-net.com) devices
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
new file mode 100644
index 000000000000..b722175f108f
--- /dev/null
+++ b/drivers/usb/serial/option.c
@@ -0,0 +1,729 @@
+/*
+  Option Card (PCMCIA to) USB to Serial Driver
+
+  Copyright (C) 2005  Matthias Urlichs <smurf@smurf.noris.de>
+
+  This driver is free software; you can redistribute it and/or modify
+  it under the terms of Version 2 of the GNU General Public License as
+  published by the Free Software Foundation.
+
+  Portions copied from the Keyspan driver by Hugh Blemings <hugh@blemings.org>
+
+  History:
+
+  2005-05-19  v0.1   Initial version, based on incomplete docs
+                     and analysis of misbehavior of the standard driver
+  2005-05-20  v0.2   Extended the input buffer to avoid losing
+                     random 64-byte chunks of data
+  2005-05-21  v0.3   implemented chars_in_buffer()
+                     turned on low_latency
+                     simplified the code somewhat
+*/
+#define DRIVER_VERSION "v0.3"
+#define DRIVER_AUTHOR "Matthias Urlichs <smurf@smurf.noris.de>"
+#define DRIVER_DESC "Option Card (PC-Card to) USB to Serial Driver"
+
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/jiffies.h>
+#include <linux/errno.h>
+#include <linux/tty.h>
+#include <linux/tty_flip.h>
+#include <linux/module.h>
+#include <linux/usb.h>
+#include "usb-serial.h"
+
+/* Function prototypes */
+static int  option_open (struct usb_serial_port *port, struct file *filp);
+static void option_close (struct usb_serial_port *port, struct file *filp);
+static int  option_startup (struct usb_serial *serial);
+static void option_shutdown (struct usb_serial *serial);
+static void option_rx_throttle (struct usb_serial_port *port);
+static void option_rx_unthrottle (struct usb_serial_port *port);
+static int  option_write_room (struct usb_serial_port *port);
+
+static void option_instat_callback(struct urb *urb, struct pt_regs *regs);
+
+
+static int  option_write (struct usb_serial_port *port,
+                          const unsigned char *buf, int count);
+
+static int  option_chars_in_buffer (struct usb_serial_port *port);
+static int  option_ioctl (struct usb_serial_port *port, struct file *file,
+                          unsigned int cmd, unsigned long arg);
+static void option_set_termios (struct usb_serial_port *port,
+                                struct termios *old);
+static void option_break_ctl (struct usb_serial_port *port, int break_state);
+static int  option_tiocmget (struct usb_serial_port *port, struct file *file);
+static int  option_tiocmset (struct usb_serial_port *port, struct file *file,
+                             unsigned int set, unsigned int clear);
+static int  option_send_setup (struct usb_serial_port *port);
+
+/* Vendor and product IDs */
+#define OPTION_VENDOR_ID		0x0AF0
+
+#define	OPTION_PRODUCT_OLD		0x5000
+#define	OPTION_PRODUCT_WLAN		0x6000
+
+static struct usb_device_id option_ids[] = {
+	{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_OLD) },
+	{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_WLAN) },
+	{ } /* Terminating entry */
+};
+
+MODULE_DEVICE_TABLE(usb, option_ids);
+
+static struct usb_driver option_driver = {
+	.owner      = THIS_MODULE,
+	.name       = "option",
+	.probe      = usb_serial_probe,
+	.disconnect = usb_serial_disconnect,
+	.id_table   = option_ids,
+};
+
+/* The card has three separate interfaces, wich the serial driver
+ * recognizes separately, thus num_port=1.
+ */
+static struct usb_serial_device_type option_3port_device = {
+	.owner			= THIS_MODULE,
+	.name			= "Option 3-port card",
+	.short_name		= "option",
+	.id_table		= option_ids,
+	.num_interrupt_in	= NUM_DONT_CARE,
+	.num_bulk_in		= NUM_DONT_CARE,
+	.num_bulk_out		= NUM_DONT_CARE,
+	.num_ports		= 1, /* 3 */
+	.open			= option_open,
+	.close			= option_close,
+	.write			= option_write,
+	.write_room		= option_write_room,
+	.chars_in_buffer	= option_chars_in_buffer,
+	.throttle		= option_rx_throttle,
+	.unthrottle		= option_rx_unthrottle,
+	.ioctl			= option_ioctl,
+	.set_termios		= option_set_termios,
+	.break_ctl		= option_break_ctl,
+	.tiocmget		= option_tiocmget,
+	.tiocmset		= option_tiocmset,
+	.attach			= option_startup,
+	.shutdown		= option_shutdown,
+	.read_int_callback	= option_instat_callback,
+};
+
+static int debug;
+
+/* per port private data */
+
+#define N_IN_URB	4
+#define N_OUT_URB	1
+#define IN_BUFLEN	1024
+#define OUT_BUFLEN	1024
+
+struct option_port_private {
+	/* Input endpoints and buffer for this port */
+	struct urb	*in_urbs[N_IN_URB];
+	char		in_buffer[N_IN_URB][IN_BUFLEN];
+	/* Output endpoints and buffer for this port */
+	struct urb	*out_urbs[N_OUT_URB];
+	char		out_buffer[N_OUT_URB][OUT_BUFLEN];
+
+	/* Settings for the port */
+	int		rts_state;	/* Handshaking pins (outputs) */
+	int		dtr_state;
+	int		cts_state;	/* Handshaking pins (inputs) */
+	int		dsr_state;
+	int		dcd_state;
+	int		ri_state;
+	// int		break_on;
+
+	unsigned long	tx_start_time[N_OUT_URB];
+};
+
+
+/* Functions used by new usb-serial code. */
+static int __init
+option_init (void)
+{
+	int retval;
+	retval = usb_serial_register(&option_3port_device);
+	if (retval)
+		goto failed_3port_device_register;
+	retval = usb_register(&option_driver);
+	if (retval)
+		goto failed_driver_register;
+
+	info(DRIVER_DESC ": " DRIVER_VERSION);
+
+	return 0;
+
+failed_driver_register:
+	usb_serial_deregister (&option_3port_device);
+failed_3port_device_register:
+	return retval;
+}
+
+static void __exit
+option_exit (void)
+{
+	usb_deregister (&option_driver);
+	usb_serial_deregister (&option_3port_device);
+}
+
+module_init(option_init);
+module_exit(option_exit);
+
+static void
+option_rx_throttle (struct usb_serial_port *port)
+{
+	dbg("%s", __FUNCTION__);
+}
+
+
+static void
+option_rx_unthrottle (struct usb_serial_port *port)
+{
+	dbg("%s", __FUNCTION__);
+}
+
+
+static void
+option_break_ctl (struct usb_serial_port *port, int break_state)
+{
+	/* Unfortunately, I don't know how to send a break */
+ 	dbg("%s", __FUNCTION__);
+}
+
+
+static void
+option_set_termios (struct usb_serial_port *port,
+				     struct termios *old_termios)
+{
+	dbg("%s", __FUNCTION__);
+
+	option_send_setup(port);
+}
+
+static int
+option_tiocmget(struct usb_serial_port *port, struct file *file)
+{
+	unsigned int			value;
+	struct option_port_private 	*portdata;
+
+	portdata = usb_get_serial_port_data(port);
+
+	value = ((portdata->rts_state) ? TIOCM_RTS : 0) |
+		((portdata->dtr_state) ? TIOCM_DTR : 0) |
+		((portdata->cts_state) ? TIOCM_CTS : 0) |
+		((portdata->dsr_state) ? TIOCM_DSR : 0) |
+		((portdata->dcd_state) ? TIOCM_CAR : 0) |
+		((portdata->ri_state) ? TIOCM_RNG : 0);
+
+	return value;
+}
+
+static int
+option_tiocmset (struct usb_serial_port *port, struct file *file,
+                 unsigned int set, unsigned int clear)
+{
+	struct option_port_private 	*portdata;
+
+	portdata = usb_get_serial_port_data(port);
+
+	if (set & TIOCM_RTS)
+		portdata->rts_state = 1;
+	if (set & TIOCM_DTR)
+		portdata->dtr_state = 1;
+
+	if (clear & TIOCM_RTS)
+		portdata->rts_state = 0;
+	if (clear & TIOCM_DTR)
+		portdata->dtr_state = 0;
+	return option_send_setup(port);
+}
+
+static int
+option_ioctl (struct usb_serial_port *port, struct file *file,
+              unsigned int cmd, unsigned long arg)
+{
+	return -ENOIOCTLCMD;
+}
+
+/* Write */
+static int
+option_write(struct usb_serial_port *port,
+			 const unsigned char *buf, int count)
+{
+	struct option_port_private 	*portdata;
+	int				i;
+	int 				left, todo;
+	struct urb			*this_urb = NULL; /* spurious */
+ 	int 				err;
+
+	portdata = usb_get_serial_port_data(port);
+
+	dbg("%s: write (%d chars)", __FUNCTION__, count);
+
+#if 0
+	spin_lock(&port->lock);
+	if (port->write_urb_busy) {
+		spin_unlock(&port->lock);
+		dbg("%s: already writing", __FUNCTION__);
+		return 0;
+	}
+	port->write_urb_busy = 1;
+	spin_unlock(&port->lock);
+#endif
+
+	i = 0;
+	left = count;
+	while (left>0) {
+		todo = left;
+		if (todo > OUT_BUFLEN)
+			todo = OUT_BUFLEN;
+
+		for (;i < N_OUT_URB; i++) {
+			/* Check we have a valid urb/endpoint before we use it... */
+			this_urb = portdata->out_urbs[i];
+			if (this_urb->status != -EINPROGRESS)
+				break;
+			if (this_urb->transfer_flags & URB_ASYNC_UNLINK)
+				continue;
+			if (time_before(jiffies, portdata->tx_start_time[i] + 10 * HZ))
+				continue;
+			this_urb->transfer_flags |= URB_ASYNC_UNLINK;
+			usb_unlink_urb(this_urb);
+		}
+
+		if (i == N_OUT_URB) {
+			/* no bulk out free! */
+			dbg("%s: no output urb -- left %d", __FUNCTION__,count-left);
+#if 0
+			port->write_urb_busy = 0;
+#endif
+			return count-left;
+		}
+
+		dbg("%s: endpoint %d buf %d", __FUNCTION__, usb_pipeendpoint(this_urb->pipe), i);
+
+		memcpy (this_urb->transfer_buffer, buf, todo);
+
+		/* send the data out the bulk port */
+		this_urb->transfer_buffer_length = todo;
+
+		this_urb->transfer_flags &= ~URB_ASYNC_UNLINK;
+		this_urb->dev = port->serial->dev;
+		err = usb_submit_urb(this_urb, GFP_ATOMIC);
+		if (err) {
+			dbg("usb_submit_urb %p (write bulk) failed (%d,, has %d)", this_urb, err, this_urb->status);
+			continue;
+		}
+		portdata->tx_start_time[i] = jiffies;
+		buf += todo;
+		left -= todo;
+	}
+
+	count -= left;
+#if 0
+	port->write_urb_busy = 0;
+#endif
+	dbg("%s: wrote (did %d)", __FUNCTION__, count);
+	return count;
+}
+
+static void
+option_indat_callback (struct urb *urb, struct pt_regs *regs)
+{
+	int	i, err;
+	int endpoint;
+	struct usb_serial_port *port;
+	struct tty_struct *tty;
+	unsigned char *data = urb->transfer_buffer;
+
+	dbg("%s: %p", __FUNCTION__, urb);
+
+	endpoint = usb_pipeendpoint(urb->pipe);
+	port = (struct usb_serial_port *) urb->context;
+
+	if (urb->status) {
+		dbg("%s: nonzero status: %d on endpoint %02x.",
+		    __FUNCTION__, urb->status, endpoint);
+	} else {
+		tty = port->tty;
+		if (urb->actual_length) {
+			for (i = 0; i < urb->actual_length ; ++i) {
+				if (tty->flip.count >= TTY_FLIPBUF_SIZE)
+					tty_flip_buffer_push(tty);
+				tty_insert_flip_char(tty, data[i], 0);
+			}
+			tty_flip_buffer_push(tty);
+		} else {
+			dbg("%s: empty read urb received", __FUNCTION__);
+		}
+
+		/* Resubmit urb so we continue receiving */
+		if (port->open_count && urb->status != -ESHUTDOWN) {
+			err = usb_submit_urb(urb, GFP_ATOMIC);
+			if (err)
+				printk(KERN_ERR "%s: resubmit read urb failed. (%d)", __FUNCTION__, err);
+		}
+	}
+	return;
+}
+
+static void
+option_outdat_callback (struct urb *urb, struct pt_regs *regs)
+{
+	struct usb_serial_port *port;
+
+	dbg("%s", __FUNCTION__);
+
+	port = (struct usb_serial_port *) urb->context;
+
+	if (port->open_count)
+		schedule_work(&port->work);
+}
+
+static void
+option_instat_callback (struct urb *urb, struct pt_regs *regs)
+{
+	int err;
+	struct usb_serial_port *port = (struct usb_serial_port *) urb->context;
+	struct option_port_private *portdata = usb_get_serial_port_data(port);
+	struct usb_serial *serial = port->serial;
+
+	dbg("%s", __FUNCTION__);
+	dbg("%s: urb %p port %p has data %p", __FUNCTION__,urb,port,portdata);
+
+	if (urb->status == 0) {
+		struct usb_ctrlrequest *req_pkt =
+				(struct usb_ctrlrequest *)urb->transfer_buffer;
+
+		if (!req_pkt) {
+			dbg("%s: NULL req_pkt\n", __FUNCTION__);
+			return;
+		}
+		if ((req_pkt->bRequestType == 0xA1) && (req_pkt->bRequest == 0x20)) {
+			int old_dcd_state;
+			unsigned char signals = *((unsigned char *)
+					urb->transfer_buffer + sizeof(struct usb_ctrlrequest));
+
+			dbg("%s: signal x%x", __FUNCTION__, signals);
+
+			old_dcd_state = portdata->dcd_state;
+			portdata->cts_state = 1;
+			portdata->dcd_state = ((signals & 0x01) ? 1 : 0);
+			portdata->dsr_state = ((signals & 0x02) ? 1 : 0);
+			portdata->ri_state = ((signals & 0x08) ? 1 : 0);
+
+			if (port->tty && !C_CLOCAL(port->tty)
+					&& old_dcd_state && !portdata->dcd_state) {
+				tty_hangup(port->tty);
+			}
+		} else
+			dbg("%s: type %x req %x", __FUNCTION__, req_pkt->bRequestType,req_pkt->bRequest);
+	} else
+		dbg("%s: error %d", __FUNCTION__, urb->status);
+
+	/* Resubmit urb so we continue receiving IRQ data */
+	if (urb->status != -ESHUTDOWN) {
+		urb->dev = serial->dev;
+		err = usb_submit_urb(urb, GFP_ATOMIC);
+		if (err)
+			dbg("%s: resubmit intr urb failed. (%d)", __FUNCTION__, err);
+	}
+}
+
+
+static int
+option_write_room (struct usb_serial_port *port)
+{
+	struct option_port_private *portdata;
+	int i;
+	int data_len = 0;
+	struct urb *this_urb;
+
+	portdata = usb_get_serial_port_data(port);
+
+	for (i=0; i < N_OUT_URB; i++)
+		this_urb = portdata->out_urbs[i];
+		if (this_urb && this_urb->status != -EINPROGRESS)
+			data_len += OUT_BUFLEN;
+
+	dbg("%s: %d", __FUNCTION__, data_len);
+	return data_len;
+}
+
+
+static int
+option_chars_in_buffer (struct usb_serial_port *port)
+{
+	struct option_port_private *portdata;
+	int i;
+	int data_len = 0;
+	struct urb *this_urb;
+
+	portdata = usb_get_serial_port_data(port);
+
+	for (i=0; i < N_OUT_URB; i++)
+		this_urb = portdata->out_urbs[i];
+		if (this_urb && this_urb->status == -EINPROGRESS)
+			data_len += this_urb->transfer_buffer_length;
+
+	dbg("%s: %d", __FUNCTION__, data_len);
+	return data_len;
+}
+
+
+static int
+option_open (struct usb_serial_port *port, struct file *filp)
+{
+	struct option_port_private 	*portdata;
+	struct usb_serial 		*serial = port->serial;
+	int				i, err;
+	struct urb			*urb;
+
+	portdata = usb_get_serial_port_data(port);
+
+	dbg("%s", __FUNCTION__);
+
+	/* Set some sane defaults */
+	portdata->rts_state = 1;
+	portdata->dtr_state = 1;
+
+	/* Reset low level data toggle and start reading from endpoints */
+	for (i = 0; i < N_IN_URB; i++) {
+		urb = portdata->in_urbs[i];
+		if (! urb)
+			continue;
+		if (urb->dev != serial->dev) {
+			dbg("%s: dev %p != %p", __FUNCTION__, urb->dev, serial->dev);
+			continue;
+		}
+
+		/* make sure endpoint data toggle is synchronized with the device */
+
+		usb_clear_halt(urb->dev, urb->pipe);
+
+		err = usb_submit_urb(urb, GFP_KERNEL);
+		if (err) {
+			dbg("%s: submit urb %d failed (%d) %d", __FUNCTION__, i, err,
+				urb->transfer_buffer_length);
+		}
+	}
+
+	/* Reset low level data toggle on out endpoints */
+	for (i = 0; i < N_OUT_URB; i++) {
+		urb = portdata->out_urbs[i];
+		if (! urb)
+			continue;
+		urb->dev = serial->dev;
+		/* usb_settoggle(urb->dev, usb_pipeendpoint(urb->pipe), usb_pipeout(urb->pipe), 0); */
+	}
+
+	port->tty->low_latency = 1;
+
+	option_send_setup(port);
+
+	return (0);
+}
+
+static inline void
+stop_urb(struct urb *urb)
+{
+	if (urb && urb->status == -EINPROGRESS) {
+		urb->transfer_flags &= ~URB_ASYNC_UNLINK;
+		usb_kill_urb(urb);
+	}
+}
+
+static void
+option_close(struct usb_serial_port *port, struct file *filp)
+{
+	int			i;
+	struct usb_serial	*serial = port->serial;
+	struct option_port_private 	*portdata;
+
+	dbg("%s", __FUNCTION__);
+	portdata = usb_get_serial_port_data(port);
+
+	portdata->rts_state = 0;
+	portdata->dtr_state = 0;
+
+	if (serial->dev) {
+		option_send_setup(port);
+
+		/* Stop reading/writing urbs */
+		for (i = 0; i < N_IN_URB; i++)
+			stop_urb(portdata->in_urbs[i]);
+		for (i = 0; i < N_OUT_URB; i++)
+			stop_urb(portdata->out_urbs[i]);
+	}
+	port->tty = NULL;
+}
+
+
+/* Helper functions used by option_setup_urbs */
+static struct urb *
+option_setup_urb (struct usb_serial *serial, int endpoint,
+                  int dir, void *ctx, char *buf, int len,
+                  void (*callback)(struct urb *, struct pt_regs *regs))
+{
+	struct urb *urb;
+
+	if (endpoint == -1)
+		return NULL;		/* endpoint not needed */
+
+	urb = usb_alloc_urb(0, GFP_KERNEL);		/* No ISO */
+	if (urb == NULL) {
+		dbg("%s: alloc for endpoint %d failed.", __FUNCTION__, endpoint);
+		return NULL;
+	}
+
+		/* Fill URB using supplied data. */
+	usb_fill_bulk_urb(urb, serial->dev,
+		      usb_sndbulkpipe(serial->dev, endpoint) | dir,
+		      buf, len, callback, ctx);
+
+	return urb;
+}
+
+/* Setup urbs */
+static void
+option_setup_urbs(struct usb_serial *serial)
+{
+	int				j;
+	struct usb_serial_port		*port;
+	struct option_port_private	*portdata;
+
+	dbg("%s", __FUNCTION__);
+
+	port = serial->port[0];
+	portdata = usb_get_serial_port_data(port);
+
+	/* Do indat endpoints first */
+	for (j = 0; j <= N_IN_URB; ++j) {
+		portdata->in_urbs[j] = option_setup_urb (serial,
+                  port->bulk_in_endpointAddress, USB_DIR_IN, port,
+                  portdata->in_buffer[j], IN_BUFLEN, option_indat_callback);
+	}
+
+	/* outdat endpoints */
+	for (j = 0; j <= N_OUT_URB; ++j) {
+		portdata->out_urbs[j] = option_setup_urb (serial,
+                  port->bulk_out_endpointAddress, USB_DIR_OUT, port,
+                  portdata->out_buffer[j], OUT_BUFLEN, option_outdat_callback);
+	}
+}
+
+
+static int
+option_send_setup(struct usb_serial_port *port)
+{
+	struct usb_serial *serial = port->serial;
+	struct option_port_private *portdata;
+
+	dbg("%s", __FUNCTION__);
+
+	portdata = usb_get_serial_port_data(port);
+
+	if (port->tty) {
+		int val = 0;
+		if (portdata->dtr_state)
+			val |= 0x01;
+		if (portdata->rts_state)
+			val |= 0x02;
+
+		return usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0),
+					0x22,0x21,val,0,NULL,0,USB_CTRL_SET_TIMEOUT);
+	}
+
+	return 0;
+}
+
+
+static int
+option_startup (struct usb_serial *serial)
+{
+	int				i, err;
+	struct usb_serial_port		*port;
+	struct option_port_private	*portdata;
+
+	dbg("%s", __FUNCTION__);
+
+	/* Now setup per port private data */
+	for (i = 0; i < serial->num_ports; i++) {
+		port = serial->port[i];
+		portdata = kmalloc(sizeof(struct option_port_private), GFP_KERNEL);
+		if (!portdata) {
+			dbg("%s: kmalloc for option_port_private (%d) failed!.", __FUNCTION__, i);
+			return (1);
+		}
+		memset(portdata, 0, sizeof(struct option_port_private));
+
+		usb_set_serial_port_data(port, portdata);
+
+		if (! port->interrupt_in_urb)
+			continue;
+		err = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL);
+		if (err)
+			dbg("%s: submit irq_in urb failed %d", __FUNCTION__, err);
+	}
+
+	option_setup_urbs(serial);
+
+	return (0);
+}
+
+static void
+option_shutdown (struct usb_serial *serial)
+{
+	int				i, j;
+	struct usb_serial_port		*port;
+	struct option_port_private	*portdata;
+
+	dbg("%s", __FUNCTION__);
+
+	/* Stop reading/writing urbs */
+	for (i = 0; i < serial->num_ports; ++i) {
+		port = serial->port[i];
+		portdata = usb_get_serial_port_data(port);
+		for (j = 0; j < N_IN_URB; j++)
+			stop_urb(portdata->in_urbs[j]);
+		for (j = 0; j < N_OUT_URB; j++)
+			stop_urb(portdata->out_urbs[j]);
+	}
+
+	/* Now free them */
+	for (i = 0; i < serial->num_ports; ++i) {
+		port = serial->port[i];
+		portdata = usb_get_serial_port_data(port);
+
+		for (j = 0; j < N_IN_URB; j++) {
+			if (portdata->in_urbs[j]) {
+				usb_free_urb(portdata->in_urbs[j]);
+				portdata->in_urbs[j] = NULL;
+			}
+		}
+		for (j = 0; j < N_OUT_URB; j++) {
+			if (portdata->out_urbs[j]) {
+				usb_free_urb(portdata->out_urbs[j]);
+				portdata->out_urbs[j] = NULL;
+			}
+		}
+	}
+
+	/* Now free per port private data */
+	for (i = 0; i < serial->num_ports; i++) {
+		port = serial->port[i];
+		kfree(usb_get_serial_port_data(port));
+	}
+}
+
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_VERSION(DRIVER_VERSION);
+MODULE_LICENSE("GPL");
+
+module_param(debug, bool, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(debug, "Debug messages");
+
diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c
index 4536f63faaea..5da76dd8fb28 100644
--- a/drivers/usb/serial/usb-serial.c
+++ b/drivers/usb/serial/usb-serial.c
@@ -1297,13 +1297,6 @@ static int __init usb_serial_init(void)
 		goto exit_bus;
 	}
 
-	/* register the generic driver, if we should */
-	result = usb_serial_generic_register(debug);
-	if (result < 0) {
-		err("%s - registering generic driver failed", __FUNCTION__);
-		goto exit_generic;
-	}
-
 	usb_serial_tty_driver->owner = THIS_MODULE;
 	usb_serial_tty_driver->driver_name = "usbserial";
 	usb_serial_tty_driver->devfs_name = "usb/tts/";
@@ -1329,17 +1322,24 @@ static int __init usb_serial_init(void)
 		goto exit_tty;
 	}
 
+	/* register the generic driver, if we should */
+	result = usb_serial_generic_register(debug);
+	if (result < 0) {
+		err("%s - registering generic driver failed", __FUNCTION__);
+		goto exit_generic;
+	}
+
 	info(DRIVER_DESC " " DRIVER_VERSION);
 
 	return result;
 
+exit_generic:
+	usb_deregister(&usb_serial_driver);
+
 exit_tty:
 	tty_unregister_driver(usb_serial_tty_driver);
 
 exit_reg_driver:
-	usb_serial_generic_deregister();
-
-exit_generic:
 	bus_unregister(&usb_serial_bus_type);
 
 exit_bus:
diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h
index d2891f475793..9fcc7bd1fbe4 100644
--- a/drivers/usb/storage/unusual_devs.h
+++ b/drivers/usb/storage/unusual_devs.h
@@ -862,6 +862,15 @@ UNUSUAL_DEV(  0x090a, 0x1001, 0x0100, 0x0100,
 		US_SC_DEVICE, US_PR_BULK, NULL,
 		US_FL_NEED_OVERRIDE ),
 
+/* Reported by Filippo Bardelli <filibard@libero.it>
+ * The device reports a subclass of RBC, which is wrong.
+ */
+UNUSUAL_DEV(  0x090a, 0x1050, 0x0100, 0x0100,
+		"Trumpion Microelectronics, Inc.",
+		"33520 USB Digital Voice Recorder",
+		US_SC_UFI, US_PR_DEVICE, NULL,
+		0),
+
 /* Trumpion Microelectronics MP3 player (felipe_alfaro@linuxmail.org) */
 UNUSUAL_DEV( 0x090a, 0x1200, 0x0000, 0x9999,
 		"Trumpion",