Merge tag 'platform-drivers-x86-v5.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86

Pull x86 platform driver updates from Hans de Goede:
 "Highlights:

   - Microsoft Surface devices System Aggregator Module support

   - SW_TABLET_MODE reporting improvements

   - thinkpad_acpi keyboard language setting support

   - platform / DPTF profile settings support:

      - Base / userspace API parts merged from Rafael's acpi-platform
        branch

      - thinkpad_acpi and ideapad-laptop support through pdx86

   - Remove support for some obsolete Intel MID platforms through
     merging of the shared intel-mid-removal branch

   - Big cleanup of the ideapad-laptop driver

   - Misc other fixes / new hw support / quirks"

* tag 'platform-drivers-x86-v5.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (99 commits)
  platform/x86: intel_scu_ipc: Increase virtual timeout from 3 to 5 seconds
  platform/surface: aggregator: Fix access of unaligned value
  tools/power/x86/intel-speed-select: Update version to 1.8
  tools/power/x86/intel-speed-select: Add new command to get/set TRL
  tools/power/x86/intel-speed-select: Add new command turbo-mode
  Platform: OLPC: Constify static struct regulator_ops
  platform/surface: Add Surface Hot-Plug driver
  platform/x86: intel_scu_wdt: Drop mistakenly added const
  platform/x86: Kconfig: add missing selects for ideapad-laptop
  platform/x86: acer-wmi: Don't use ACPI_EXCEPTION()
  platform/x86: thinkpad_acpi: Replace ifdef CONFIG_ACPI_PLATFORM_PROFILE with depends on
  platform/x86: thinkpad_acpi: Fix 'warning: no previous prototype for' warnings
  platform/x86: msi-wmi: Fix variable 'status' set but not used compiler warning
  platform/surface: surface3-wmi: Fix variable 'status' set but not used compiler warning
  platform/x86: Move all dell drivers to their own subdirectory
  Documentation/ABI: sysfs-platform-ideapad-laptop: conservation_mode attribute
  Documentation/ABI: sysfs-platform-ideapad-laptop: update device attribute paths
  platform/x86: ideapad-laptop: add "always on USB charging" control support
  platform/x86: ideapad-laptop: add keyboard backlight control support
  platform/x86: ideapad-laptop: send notification about touchpad state change to sysfs
  ...

79 files changed, 12623 insertions, 3406 deletions

diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index fa225175e68d..f62f0b6b0bc0 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -1253,13 +1253,6 @@ config GPIO_MAX77650
 	  GPIO driver for MAX77650/77651 PMIC from Maxim Semiconductor.
 	  These chips have a single pin that can be configured as GPIO.
 
-config GPIO_MSIC
-	bool "Intel MSIC mixed signal gpio support"
-	depends on (X86 || COMPILE_TEST) && MFD_INTEL_MSIC
-	help
-	  Enable support for GPIO on intel MSIC controllers found in
-	  intel MID devices
-
 config GPIO_PALMAS
 	bool "TI PALMAS series PMICs GPIO"
 	depends on MFD_PALMAS
@@ -1455,13 +1448,6 @@ config GPIO_BT8XX
 
 	  If unsure, say N.
 
-config GPIO_INTEL_MID
-	bool "Intel MID GPIO support"
-	depends on X86_INTEL_MID
-	select GPIOLIB_IRQCHIP
-	help
-	  Say Y here to support Intel MID GPIO.
-
 config GPIO_MERRIFIELD
 	tristate "Intel Merrifield GPIO support"
 	depends on X86_INTEL_MID
diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
index 35e3b6026665..a2106d667fb3 100644
--- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile
@@ -67,7 +67,6 @@ obj-$(CONFIG_GPIO_HISI)                 += gpio-hisi.o
 obj-$(CONFIG_GPIO_HLWD)			+= gpio-hlwd.o
 obj-$(CONFIG_HTC_EGPIO)			+= gpio-htc-egpio.o
 obj-$(CONFIG_GPIO_ICH)			+= gpio-ich.o
-obj-$(CONFIG_GPIO_INTEL_MID)		+= gpio-intel-mid.o
 obj-$(CONFIG_GPIO_IOP)			+= gpio-iop.o
 obj-$(CONFIG_GPIO_IT87)			+= gpio-it87.o
 obj-$(CONFIG_GPIO_IXP4XX)		+= gpio-ixp4xx.o
diff --git a/drivers/gpio/TODO b/drivers/gpio/TODO
index 0229fa79499e..b8b1473a5b1e 100644
--- a/drivers/gpio/TODO
+++ b/drivers/gpio/TODO
@@ -101,7 +101,7 @@ for a few GPIOs. Those should stay where they are.
 
 At the same time it makes sense to get rid of code duplication in existing or
 new coming drivers. For example, gpio-ml-ioh should be incorporated into
-gpio-pch. In similar way gpio-intel-mid into gpio-pxa.
+gpio-pch.
 
 
 Generic MMIO GPIO
diff --git a/drivers/gpio/gpio-intel-mid.c b/drivers/gpio/gpio-intel-mid.c
deleted file mode 100644
index 86a10c808ef6..000000000000
--- a/drivers/gpio/gpio-intel-mid.c
+++ /dev/null
@@ -1,414 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Intel MID GPIO driver
- *
- * Copyright (c) 2008-2014,2016 Intel Corporation.
- */
-
-/* Supports:
- * Moorestown platform Langwell chip.
- * Medfield platform Penwell chip.
- * Clovertrail platform Cloverview chip.
- */
-
-#include <linux/delay.h>
-#include <linux/gpio/driver.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/io.h>
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/platform_device.h>
-#include <linux/pm_runtime.h>
-#include <linux/slab.h>
-#include <linux/stddef.h>
-
-#define INTEL_MID_IRQ_TYPE_EDGE		(1 << 0)
-#define INTEL_MID_IRQ_TYPE_LEVEL	(1 << 1)
-
-/*
- * Langwell chip has 64 pins and thus there are 2 32bit registers to control
- * each feature, while Penwell chip has 96 pins for each block, and need 3 32bit
- * registers to control them, so we only define the order here instead of a
- * structure, to get a bit offset for a pin (use GPDR as an example):
- *
- * nreg = ngpio / 32;
- * reg = offset / 32;
- * bit = offset % 32;
- * reg_addr = reg_base + GPDR * nreg * 4 + reg * 4;
- *
- * so the bit of reg_addr is to control pin offset's GPDR feature
-*/
-
-enum GPIO_REG {
-	GPLR = 0,	/* pin level read-only */
-	GPDR,		/* pin direction */
-	GPSR,		/* pin set */
-	GPCR,		/* pin clear */
-	GRER,		/* rising edge detect */
-	GFER,		/* falling edge detect */
-	GEDR,		/* edge detect result */
-	GAFR,		/* alt function */
-};
-
-/* intel_mid gpio driver data */
-struct intel_mid_gpio_ddata {
-	u16 ngpio;		/* number of gpio pins */
-	u32 chip_irq_type;	/* chip interrupt type */
-};
-
-struct intel_mid_gpio {
-	struct gpio_chip		chip;
-	void __iomem			*reg_base;
-	spinlock_t			lock;
-	struct pci_dev			*pdev;
-};
-
-static void __iomem *gpio_reg(struct gpio_chip *chip, unsigned offset,
-			      enum GPIO_REG reg_type)
-{
-	struct intel_mid_gpio *priv = gpiochip_get_data(chip);
-	unsigned nreg = chip->ngpio / 32;
-	u8 reg = offset / 32;
-
-	return priv->reg_base + reg_type * nreg * 4 + reg * 4;
-}
-
-static void __iomem *gpio_reg_2bit(struct gpio_chip *chip, unsigned offset,
-				   enum GPIO_REG reg_type)
-{
-	struct intel_mid_gpio *priv = gpiochip_get_data(chip);
-	unsigned nreg = chip->ngpio / 32;
-	u8 reg = offset / 16;
-
-	return priv->reg_base + reg_type * nreg * 4 + reg * 4;
-}
-
-static int intel_gpio_request(struct gpio_chip *chip, unsigned offset)
-{
-	void __iomem *gafr = gpio_reg_2bit(chip, offset, GAFR);
-	u32 value = readl(gafr);
-	int shift = (offset % 16) << 1, af = (value >> shift) & 3;
-
-	if (af) {
-		value &= ~(3 << shift);
-		writel(value, gafr);
-	}
-	return 0;
-}
-
-static int intel_gpio_get(struct gpio_chip *chip, unsigned offset)
-{
-	void __iomem *gplr = gpio_reg(chip, offset, GPLR);
-
-	return !!(readl(gplr) & BIT(offset % 32));
-}
-
-static void intel_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
-{
-	void __iomem *gpsr, *gpcr;
-
-	if (value) {
-		gpsr = gpio_reg(chip, offset, GPSR);
-		writel(BIT(offset % 32), gpsr);
-	} else {
-		gpcr = gpio_reg(chip, offset, GPCR);
-		writel(BIT(offset % 32), gpcr);
-	}
-}
-
-static int intel_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
-{
-	struct intel_mid_gpio *priv = gpiochip_get_data(chip);
-	void __iomem *gpdr = gpio_reg(chip, offset, GPDR);
-	u32 value;
-	unsigned long flags;
-
-	if (priv->pdev)
-		pm_runtime_get(&priv->pdev->dev);
-
-	spin_lock_irqsave(&priv->lock, flags);
-	value = readl(gpdr);
-	value &= ~BIT(offset % 32);
-	writel(value, gpdr);
-	spin_unlock_irqrestore(&priv->lock, flags);
-
-	if (priv->pdev)
-		pm_runtime_put(&priv->pdev->dev);
-
-	return 0;
-}
-
-static int intel_gpio_direction_output(struct gpio_chip *chip,
-			unsigned offset, int value)
-{
-	struct intel_mid_gpio *priv = gpiochip_get_data(chip);
-	void __iomem *gpdr = gpio_reg(chip, offset, GPDR);
-	unsigned long flags;
-
-	intel_gpio_set(chip, offset, value);
-
-	if (priv->pdev)
-		pm_runtime_get(&priv->pdev->dev);
-
-	spin_lock_irqsave(&priv->lock, flags);
-	value = readl(gpdr);
-	value |= BIT(offset % 32);
-	writel(value, gpdr);
-	spin_unlock_irqrestore(&priv->lock, flags);
-
-	if (priv->pdev)
-		pm_runtime_put(&priv->pdev->dev);
-
-	return 0;
-}
-
-static int intel_mid_irq_type(struct irq_data *d, unsigned type)
-{
-	struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
-	struct intel_mid_gpio *priv = gpiochip_get_data(gc);
-	u32 gpio = irqd_to_hwirq(d);
-	unsigned long flags;
-	u32 value;
-	void __iomem *grer = gpio_reg(&priv->chip, gpio, GRER);
-	void __iomem *gfer = gpio_reg(&priv->chip, gpio, GFER);
-
-	if (gpio >= priv->chip.ngpio)
-		return -EINVAL;
-
-	if (priv->pdev)
-		pm_runtime_get(&priv->pdev->dev);
-
-	spin_lock_irqsave(&priv->lock, flags);
-	if (type & IRQ_TYPE_EDGE_RISING)
-		value = readl(grer) | BIT(gpio % 32);
-	else
-		value = readl(grer) & (~BIT(gpio % 32));
-	writel(value, grer);
-
-	if (type & IRQ_TYPE_EDGE_FALLING)
-		value = readl(gfer) | BIT(gpio % 32);
-	else
-		value = readl(gfer) & (~BIT(gpio % 32));
-	writel(value, gfer);
-	spin_unlock_irqrestore(&priv->lock, flags);
-
-	if (priv->pdev)
-		pm_runtime_put(&priv->pdev->dev);
-
-	return 0;
-}
-
-static void intel_mid_irq_unmask(struct irq_data *d)
-{
-}
-
-static void intel_mid_irq_mask(struct irq_data *d)
-{
-}
-
-static struct irq_chip intel_mid_irqchip = {
-	.name		= "INTEL_MID-GPIO",
-	.irq_mask	= intel_mid_irq_mask,
-	.irq_unmask	= intel_mid_irq_unmask,
-	.irq_set_type	= intel_mid_irq_type,
-};
-
-static const struct intel_mid_gpio_ddata gpio_lincroft = {
-	.ngpio = 64,
-};
-
-static const struct intel_mid_gpio_ddata gpio_penwell_aon = {
-	.ngpio = 96,
-	.chip_irq_type = INTEL_MID_IRQ_TYPE_EDGE,
-};
-
-static const struct intel_mid_gpio_ddata gpio_penwell_core = {
-	.ngpio = 96,
-	.chip_irq_type = INTEL_MID_IRQ_TYPE_EDGE,
-};
-
-static const struct intel_mid_gpio_ddata gpio_cloverview_aon = {
-	.ngpio = 96,
-	.chip_irq_type = INTEL_MID_IRQ_TYPE_EDGE | INTEL_MID_IRQ_TYPE_LEVEL,
-};
-
-static const struct intel_mid_gpio_ddata gpio_cloverview_core = {
-	.ngpio = 96,
-	.chip_irq_type = INTEL_MID_IRQ_TYPE_EDGE,
-};
-
-static const struct pci_device_id intel_gpio_ids[] = {
-	{
-		/* Lincroft */
-		PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x080f),
-		.driver_data = (kernel_ulong_t)&gpio_lincroft,
-	},
-	{
-		/* Penwell AON */
-		PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x081f),
-		.driver_data = (kernel_ulong_t)&gpio_penwell_aon,
-	},
-	{
-		/* Penwell Core */
-		PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x081a),
-		.driver_data = (kernel_ulong_t)&gpio_penwell_core,
-	},
-	{
-		/* Cloverview Aon */
-		PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x08eb),
-		.driver_data = (kernel_ulong_t)&gpio_cloverview_aon,
-	},
-	{
-		/* Cloverview Core */
-		PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x08f7),
-		.driver_data = (kernel_ulong_t)&gpio_cloverview_core,
-	},
-	{ }
-};
-
-static void intel_mid_irq_handler(struct irq_desc *desc)
-{
-	struct gpio_chip *gc = irq_desc_get_handler_data(desc);
-	struct intel_mid_gpio *priv = gpiochip_get_data(gc);
-	struct irq_data *data = irq_desc_get_irq_data(desc);
-	struct irq_chip *chip = irq_data_get_irq_chip(data);
-	u32 base, gpio, mask;
-	unsigned long pending;
-	void __iomem *gedr;
-
-	/* check GPIO controller to check which pin triggered the interrupt */
-	for (base = 0; base < priv->chip.ngpio; base += 32) {
-		gedr = gpio_reg(&priv->chip, base, GEDR);
-		while ((pending = readl(gedr))) {
-			gpio = __ffs(pending);
-			mask = BIT(gpio);
-			/* Clear before handling so we can't lose an edge */
-			writel(mask, gedr);
-			generic_handle_irq(irq_find_mapping(gc->irq.domain,
-							    base + gpio));
-		}
-	}
-
-	chip->irq_eoi(data);
-}
-
-static int intel_mid_irq_init_hw(struct gpio_chip *chip)
-{
-	struct intel_mid_gpio *priv = gpiochip_get_data(chip);
-	void __iomem *reg;
-	unsigned base;
-
-	for (base = 0; base < priv->chip.ngpio; base += 32) {
-		/* Clear the rising-edge detect register */
-		reg = gpio_reg(&priv->chip, base, GRER);
-		writel(0, reg);
-		/* Clear the falling-edge detect register */
-		reg = gpio_reg(&priv->chip, base, GFER);
-		writel(0, reg);
-		/* Clear the edge detect status register */
-		reg = gpio_reg(&priv->chip, base, GEDR);
-		writel(~0, reg);
-	}
-
-	return 0;
-}
-
-static int __maybe_unused intel_gpio_runtime_idle(struct device *dev)
-{
-	int err = pm_schedule_suspend(dev, 500);
-	return err ?: -EBUSY;
-}
-
-static const struct dev_pm_ops intel_gpio_pm_ops = {
-	SET_RUNTIME_PM_OPS(NULL, NULL, intel_gpio_runtime_idle)
-};
-
-static int intel_gpio_probe(struct pci_dev *pdev,
-			  const struct pci_device_id *id)
-{
-	void __iomem *base;
-	struct intel_mid_gpio *priv;
-	u32 gpio_base;
-	u32 irq_base;
-	int retval;
-	struct gpio_irq_chip *girq;
-	struct intel_mid_gpio_ddata *ddata =
-				(struct intel_mid_gpio_ddata *)id->driver_data;
-
-	retval = pcim_enable_device(pdev);
-	if (retval)
-		return retval;
-
-	retval = pcim_iomap_regions(pdev, 1 << 0 | 1 << 1, pci_name(pdev));
-	if (retval) {
-		dev_err(&pdev->dev, "I/O memory mapping error\n");
-		return retval;
-	}
-
-	base = pcim_iomap_table(pdev)[1];
-
-	irq_base = readl(base);
-	gpio_base = readl(sizeof(u32) + base);
-
-	/* release the IO mapping, since we already get the info from bar1 */
-	pcim_iounmap_regions(pdev, 1 << 1);
-
-	priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
-	if (!priv)
-		return -ENOMEM;
-
-	priv->reg_base = pcim_iomap_table(pdev)[0];
-	priv->chip.label = dev_name(&pdev->dev);
-	priv->chip.parent = &pdev->dev;
-	priv->chip.request = intel_gpio_request;
-	priv->chip.direction_input = intel_gpio_direction_input;
-	priv->chip.direction_output = intel_gpio_direction_output;
-	priv->chip.get = intel_gpio_get;
-	priv->chip.set = intel_gpio_set;
-	priv->chip.base = gpio_base;
-	priv->chip.ngpio = ddata->ngpio;
-	priv->chip.can_sleep = false;
-	priv->pdev = pdev;
-
-	spin_lock_init(&priv->lock);
-
-	girq = &priv->chip.irq;
-	girq->chip = &intel_mid_irqchip;
-	girq->init_hw = intel_mid_irq_init_hw;
-	girq->parent_handler = intel_mid_irq_handler;
-	girq->num_parents = 1;
-	girq->parents = devm_kcalloc(&pdev->dev, girq->num_parents,
-				     sizeof(*girq->parents),
-				     GFP_KERNEL);
-	if (!girq->parents)
-		return -ENOMEM;
-	girq->parents[0] = pdev->irq;
-	girq->first = irq_base;
-	girq->default_type = IRQ_TYPE_NONE;
-	girq->handler = handle_simple_irq;
-
-	pci_set_drvdata(pdev, priv);
-
-	retval = devm_gpiochip_add_data(&pdev->dev, &priv->chip, priv);
-	if (retval) {
-		dev_err(&pdev->dev, "gpiochip_add error %d\n", retval);
-		return retval;
-	}
-
-	pm_runtime_put_noidle(&pdev->dev);
-	pm_runtime_allow(&pdev->dev);
-
-	return 0;
-}
-
-static struct pci_driver intel_gpio_driver = {
-	.name		= "intel_mid_gpio",
-	.id_table	= intel_gpio_ids,
-	.probe		= intel_gpio_probe,
-	.driver		= {
-		.pm	= &intel_gpio_pm_ops,
-	},
-};
-
-builtin_pci_driver(intel_gpio_driver);
diff --git a/drivers/gpio/gpio-msic.c b/drivers/gpio/gpio-msic.c
deleted file mode 100644
index 7e3c96e4ab2c..000000000000
--- a/drivers/gpio/gpio-msic.c
+++ /dev/null
@@ -1,314 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Intel Medfield MSIC GPIO driver>
- * Copyright (c) 2011, Intel Corporation.
- *
- * Author: Mathias Nyman <mathias.nyman@linux.intel.com>
- * Based on intel_pmic_gpio.c
- */
-
-#include <linux/gpio/driver.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/kernel.h>
-#include <linux/mfd/intel_msic.h>
-#include <linux/platform_device.h>
-#include <linux/slab.h>
-
-/* the offset for the mapping of global gpio pin to irq */
-#define MSIC_GPIO_IRQ_OFFSET	0x100
-
-#define MSIC_GPIO_DIR_IN	0
-#define MSIC_GPIO_DIR_OUT	BIT(5)
-#define MSIC_GPIO_TRIG_FALL	BIT(1)
-#define MSIC_GPIO_TRIG_RISE	BIT(2)
-
-/* masks for msic gpio output GPIOxxxxCTLO registers */
-#define MSIC_GPIO_DIR_MASK	BIT(5)
-#define MSIC_GPIO_DRV_MASK	BIT(4)
-#define MSIC_GPIO_REN_MASK	BIT(3)
-#define MSIC_GPIO_RVAL_MASK	(BIT(2) | BIT(1))
-#define MSIC_GPIO_DOUT_MASK	BIT(0)
-
-/* masks for msic gpio input GPIOxxxxCTLI registers */
-#define MSIC_GPIO_GLBYP_MASK	BIT(5)
-#define MSIC_GPIO_DBNC_MASK	(BIT(4) | BIT(3))
-#define MSIC_GPIO_INTCNT_MASK	(BIT(2) | BIT(1))
-#define MSIC_GPIO_DIN_MASK	BIT(0)
-
-#define MSIC_NUM_GPIO		24
-
-struct msic_gpio {
-	struct platform_device	*pdev;
-	struct mutex		buslock;
-	struct gpio_chip	chip;
-	int			irq;
-	unsigned		irq_base;
-	unsigned long		trig_change_mask;
-	unsigned		trig_type;
-};
-
-/*
- * MSIC has 24 gpios, 16 low voltage (1.2-1.8v) and 8 high voltage (3v).
- * Both the high and low voltage gpios are divided in two banks.
- * GPIOs are numbered with GPIO0LV0 as gpio_base in the following order:
- * GPIO0LV0..GPIO0LV7: low voltage, bank 0, gpio_base
- * GPIO1LV0..GPIO1LV7: low voltage, bank 1,  gpio_base + 8
- * GPIO0HV0..GPIO0HV3: high voltage, bank 0, gpio_base + 16
- * GPIO1HV0..GPIO1HV3: high voltage, bank 1, gpio_base + 20
- */
-
-static int msic_gpio_to_ireg(unsigned offset)
-{
-	if (offset >= MSIC_NUM_GPIO)
-		return -EINVAL;
-
-	if (offset < 8)
-		return INTEL_MSIC_GPIO0LV0CTLI - offset;
-	if (offset < 16)
-		return INTEL_MSIC_GPIO1LV0CTLI - offset + 8;
-	if (offset < 20)
-		return INTEL_MSIC_GPIO0HV0CTLI - offset + 16;
-
-	return INTEL_MSIC_GPIO1HV0CTLI - offset + 20;
-}
-
-static int msic_gpio_to_oreg(unsigned offset)
-{
-	if (offset >= MSIC_NUM_GPIO)
-		return -EINVAL;
-
-	if (offset < 8)
-		return INTEL_MSIC_GPIO0LV0CTLO - offset;
-	if (offset < 16)
-		return INTEL_MSIC_GPIO1LV0CTLO - offset + 8;
-	if (offset < 20)
-		return INTEL_MSIC_GPIO0HV0CTLO - offset + 16;
-
-	return INTEL_MSIC_GPIO1HV0CTLO - offset + 20;
-}
-
-static int msic_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
-{
-	int reg;
-
-	reg = msic_gpio_to_oreg(offset);
-	if (reg < 0)
-		return reg;
-
-	return intel_msic_reg_update(reg, MSIC_GPIO_DIR_IN, MSIC_GPIO_DIR_MASK);
-}
-
-static int msic_gpio_direction_output(struct gpio_chip *chip,
-			unsigned offset, int value)
-{
-	int reg;
-	unsigned mask;
-
-	value = (!!value) | MSIC_GPIO_DIR_OUT;
-	mask = MSIC_GPIO_DIR_MASK | MSIC_GPIO_DOUT_MASK;
-
-	reg = msic_gpio_to_oreg(offset);
-	if (reg < 0)
-		return reg;
-
-	return intel_msic_reg_update(reg, value, mask);
-}
-
-static int msic_gpio_get(struct gpio_chip *chip, unsigned offset)
-{
-	u8 r;
-	int ret;
-	int reg;
-
-	reg = msic_gpio_to_ireg(offset);
-	if (reg < 0)
-		return reg;
-
-	ret = intel_msic_reg_read(reg, &r);
-	if (ret < 0)
-		return ret;
-
-	return !!(r & MSIC_GPIO_DIN_MASK);
-}
-
-static void msic_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
-{
-	int reg;
-
-	reg = msic_gpio_to_oreg(offset);
-	if (reg < 0)
-		return;
-
-	intel_msic_reg_update(reg, !!value , MSIC_GPIO_DOUT_MASK);
-}
-
-/*
- * This is called from genirq with mg->buslock locked and
- * irq_desc->lock held. We can not access the scu bus here, so we
- * store the change and update in the bus_sync_unlock() function below
- */
-static int msic_irq_type(struct irq_data *data, unsigned type)
-{
-	struct msic_gpio *mg = irq_data_get_irq_chip_data(data);
-	u32 gpio = data->irq - mg->irq_base;
-
-	if (gpio >= mg->chip.ngpio)
-		return -EINVAL;
-
-	/* mark for which gpio the trigger changed, protected by buslock */
-	mg->trig_change_mask |= (1 << gpio);
-	mg->trig_type = type;
-
-	return 0;
-}
-
-static int msic_gpio_to_irq(struct gpio_chip *chip, unsigned offset)
-{
-	struct msic_gpio *mg = gpiochip_get_data(chip);
-	return mg->irq_base + offset;
-}
-
-static void msic_bus_lock(struct irq_data *data)
-{
-	struct msic_gpio *mg = irq_data_get_irq_chip_data(data);
-	mutex_lock(&mg->buslock);
-}
-
-static void msic_bus_sync_unlock(struct irq_data *data)
-{
-	struct msic_gpio *mg = irq_data_get_irq_chip_data(data);
-	int offset;
-	int reg;
-	u8 trig = 0;
-
-	/* We can only get one change at a time as the buslock covers the
-	   entire transaction. The irq_desc->lock is dropped before we are
-	   called but that is fine */
-	if (mg->trig_change_mask) {
-		offset = __ffs(mg->trig_change_mask);
-
-		reg = msic_gpio_to_ireg(offset);
-		if (reg < 0)
-			goto out;
-
-		if (mg->trig_type & IRQ_TYPE_EDGE_RISING)
-			trig |= MSIC_GPIO_TRIG_RISE;
-		if (mg->trig_type & IRQ_TYPE_EDGE_FALLING)
-			trig |= MSIC_GPIO_TRIG_FALL;
-
-		intel_msic_reg_update(reg, trig, MSIC_GPIO_INTCNT_MASK);
-		mg->trig_change_mask = 0;
-	}
-out:
-	mutex_unlock(&mg->buslock);
-}
-
-/* Firmware does all the masking and unmasking for us, no masking here. */
-static void msic_irq_unmask(struct irq_data *data) { }
-
-static void msic_irq_mask(struct irq_data *data) { }
-
-static struct irq_chip msic_irqchip = {
-	.name			= "MSIC-GPIO",
-	.irq_mask		= msic_irq_mask,
-	.irq_unmask		= msic_irq_unmask,
-	.irq_set_type		= msic_irq_type,
-	.irq_bus_lock		= msic_bus_lock,
-	.irq_bus_sync_unlock	= msic_bus_sync_unlock,
-};
-
-static void msic_gpio_irq_handler(struct irq_desc *desc)
-{
-	struct irq_data *data = irq_desc_get_irq_data(desc);
-	struct msic_gpio *mg = irq_data_get_irq_handler_data(data);
-	struct irq_chip *chip = irq_data_get_irq_chip(data);
-	struct intel_msic *msic = pdev_to_intel_msic(mg->pdev);
-	unsigned long pending;
-	int i;
-	int bitnr;
-	u8 pin;
-
-	for (i = 0; i < (mg->chip.ngpio / BITS_PER_BYTE); i++) {
-		intel_msic_irq_read(msic, INTEL_MSIC_GPIO0LVIRQ + i, &pin);
-		pending = pin;
-
-		for_each_set_bit(bitnr, &pending, BITS_PER_BYTE)
-			generic_handle_irq(mg->irq_base + i * BITS_PER_BYTE + bitnr);
-	}
-	chip->irq_eoi(data);
-}
-
-static int platform_msic_gpio_probe(struct platform_device *pdev)
-{
-	struct device *dev = &pdev->dev;
-	struct intel_msic_gpio_pdata *pdata = dev_get_platdata(dev);
-	struct msic_gpio *mg;
-	int irq = platform_get_irq(pdev, 0);
-	int retval;
-	int i;
-
-	if (irq < 0) {
-		dev_err(dev, "no IRQ line: %d\n", irq);
-		return irq;
-	}
-
-	if (!pdata || !pdata->gpio_base) {
-		dev_err(dev, "incorrect or missing platform data\n");
-		return -EINVAL;
-	}
-
-	mg = kzalloc(sizeof(*mg), GFP_KERNEL);
-	if (!mg)
-		return -ENOMEM;
-
-	dev_set_drvdata(dev, mg);
-
-	mg->pdev = pdev;
-	mg->irq = irq;
-	mg->irq_base = pdata->gpio_base + MSIC_GPIO_IRQ_OFFSET;
-	mg->chip.label = "msic_gpio";
-	mg->chip.direction_input = msic_gpio_direction_input;
-	mg->chip.direction_output = msic_gpio_direction_output;
-	mg->chip.get = msic_gpio_get;
-	mg->chip.set = msic_gpio_set;
-	mg->chip.to_irq = msic_gpio_to_irq;
-	mg->chip.base = pdata->gpio_base;
-	mg->chip.ngpio = MSIC_NUM_GPIO;
-	mg->chip.can_sleep = true;
-	mg->chip.parent = dev;
-
-	mutex_init(&mg->buslock);
-
-	retval = gpiochip_add_data(&mg->chip, mg);
-	if (retval) {
-		dev_err(dev, "Adding MSIC gpio chip failed\n");
-		goto err;
-	}
-
-	for (i = 0; i < mg->chip.ngpio; i++) {
-		irq_set_chip_data(i + mg->irq_base, mg);
-		irq_set_chip_and_handler(i + mg->irq_base,
-					 &msic_irqchip,
-					 handle_simple_irq);
-	}
-	irq_set_chained_handler_and_data(mg->irq, msic_gpio_irq_handler, mg);
-
-	return 0;
-err:
-	kfree(mg);
-	return retval;
-}
-
-static struct platform_driver platform_msic_gpio_driver = {
-	.driver = {
-		.name		= "msic_gpio",
-	},
-	.probe		= platform_msic_gpio_probe,
-};
-
-static int __init platform_msic_gpio_init(void)
-{
-	return platform_driver_register(&platform_msic_gpio_driver);
-}
-subsys_initcall(platform_msic_gpio_init);
diff --git a/drivers/gpu/drm/gma500/oaktrail_device.c b/drivers/gpu/drm/gma500/oaktrail_device.c
index 08cd5f73c868..aff0534831ef 100644
--- a/drivers/gpu/drm/gma500/oaktrail_device.c
+++ b/drivers/gpu/drm/gma500/oaktrail_device.c
@@ -10,9 +10,6 @@
 #include <linux/dmi.h>
 #include <linux/module.h>
 
-#include <asm/intel-mid.h>
-#include <asm/intel_scu_ipc.h>
-
 #include <drm/drm.h>
 
 #include "intel_bios.h"
diff --git a/drivers/gpu/drm/gma500/psb_drv.h b/drivers/gpu/drm/gma500/psb_drv.h
index 020a71b91577..694495070c65 100644
--- a/drivers/gpu/drm/gma500/psb_drv.h
+++ b/drivers/gpu/drm/gma500/psb_drv.h
@@ -386,6 +386,8 @@ struct psb_ops;
 
 #define PSB_NUM_PIPE		3
 
+struct intel_scu_ipc_dev;
+
 struct drm_psb_private {
 	struct drm_device *dev;
 	struct pci_dev *aux_pdev; /* Currently only used by mrst */
@@ -525,6 +527,7 @@ struct drm_psb_private {
 	 * Used for modifying backlight from
 	 * xrandr -- consider removing and using HAL instead
 	 */
+	struct intel_scu_ipc_dev *scu;
 	struct backlight_device *backlight_device;
 	struct drm_property *backlight_property;
 	bool backlight_enabled;
diff --git a/drivers/platform/olpc/olpc-ec.c b/drivers/platform/olpc/olpc-ec.c
index f64b82824db2..4ff5c3a12991 100644
--- a/drivers/platform/olpc/olpc-ec.c
+++ b/drivers/platform/olpc/olpc-ec.c
@@ -37,7 +37,6 @@ struct olpc_ec_priv {
 	struct mutex cmd_lock;
 
 	/* DCON regulator */
-	struct regulator_dev *dcon_rdev;
 	bool dcon_enabled;
 
 	/* Pending EC commands */
@@ -387,24 +386,26 @@ static int dcon_regulator_is_enabled(struct regulator_dev *rdev)
 	return ec->dcon_enabled ? 1 : 0;
 }
 
-static struct regulator_ops dcon_regulator_ops = {
+static const struct regulator_ops dcon_regulator_ops = {
 	.enable		= dcon_regulator_enable,
 	.disable	= dcon_regulator_disable,
 	.is_enabled	= dcon_regulator_is_enabled,
 };
 
 static const struct regulator_desc dcon_desc = {
-	.name	= "dcon",
-	.id	= 0,
-	.ops	= &dcon_regulator_ops,
-	.type	= REGULATOR_VOLTAGE,
-	.owner	= THIS_MODULE,
+	.name		= "dcon",
+	.id		= 0,
+	.ops		= &dcon_regulator_ops,
+	.type		= REGULATOR_VOLTAGE,
+	.owner		= THIS_MODULE,
+	.enable_time	= 25000,
 };
 
 static int olpc_ec_probe(struct platform_device *pdev)
 {
 	struct olpc_ec_priv *ec;
 	struct regulator_config config = { };
+	struct regulator_dev *regulator;
 	int err;
 
 	if (!ec_driver)
@@ -426,26 +427,26 @@ static int olpc_ec_probe(struct platform_device *pdev)
 
 	/* get the EC revision */
 	err = olpc_ec_cmd(EC_FIRMWARE_REV, NULL, 0, &ec->version, 1);
-	if (err) {
-		ec_priv = NULL;
-		kfree(ec);
-		return err;
-	}
+	if (err)
+		goto error;
 
 	config.dev = pdev->dev.parent;
 	config.driver_data = ec;
 	ec->dcon_enabled = true;
-	ec->dcon_rdev = devm_regulator_register(&pdev->dev, &dcon_desc,
-								&config);
-	if (IS_ERR(ec->dcon_rdev)) {
+	regulator = devm_regulator_register(&pdev->dev, &dcon_desc, &config);
+	if (IS_ERR(regulator)) {
 		dev_err(&pdev->dev, "failed to register DCON regulator\n");
-		err = PTR_ERR(ec->dcon_rdev);
-		kfree(ec);
-		return err;
+		err = PTR_ERR(regulator);
+		goto error;
 	}
 
 	ec->dbgfs_dir = olpc_ec_setup_debugfs();
 
+	return 0;
+
+error:
+	ec_priv = NULL;
+	kfree(ec);
 	return err;
 }
 
diff --git a/drivers/platform/surface/Kconfig b/drivers/platform/surface/Kconfig
index 2c941cdac9ee..0847b2dc97bf 100644
--- a/drivers/platform/surface/Kconfig
+++ b/drivers/platform/surface/Kconfig
@@ -41,6 +41,42 @@ config SURFACE_3_POWER_OPREGION
 	  This driver provides support for ACPI operation
 	  region of the Surface 3 battery platform driver.
 
+config SURFACE_ACPI_NOTIFY
+	tristate "Surface ACPI Notify Driver"
+	depends on SURFACE_AGGREGATOR
+	help
+	  Surface ACPI Notify (SAN) driver for Microsoft Surface devices.
+
+	  This driver provides support for the ACPI interface (called SAN) of
+	  the Surface System Aggregator Module (SSAM) EC. This interface is used
+	  on 5th- and 6th-generation Microsoft Surface devices (including
+	  Surface Pro 5 and 6, Surface Book 2, Surface Laptops 1 and 2, and in
+	  reduced functionality on the Surface Laptop 3) to execute SSAM
+	  requests directly from ACPI code, as well as receive SSAM events and
+	  turn them into ACPI notifications. It essentially acts as a
+	  translation layer between the SSAM controller and ACPI.
+
+	  Specifically, this driver may be needed for battery status reporting,
+	  thermal sensor access, and real-time clock information, depending on
+	  the Surface device in question.
+
+config SURFACE_AGGREGATOR_CDEV
+	tristate "Surface System Aggregator Module User-Space Interface"
+	depends on SURFACE_AGGREGATOR
+	help
+	  Provides a misc-device interface to the Surface System Aggregator
+	  Module (SSAM) controller.
+
+	  This option provides a module (called surface_aggregator_cdev), that,
+	  when loaded, will add a client device (and its respective driver) to
+	  the SSAM controller. Said client device manages a misc-device
+	  interface (/dev/surface/aggregator), which can be used by user-space
+	  tools to directly communicate with the SSAM EC by sending requests and
+	  receiving the corresponding responses.
+
+	  The provided interface is intended for debugging and development only,
+	  and should not be used otherwise.
+
 config SURFACE_GPE
 	tristate "Surface GPE/Lid Support Driver"
 	depends on DMI
@@ -50,10 +86,31 @@ config SURFACE_GPE
 	  accordingly. It is required on those devices to allow wake-ups from
 	  suspend by opening the lid.
 
+config SURFACE_HOTPLUG
+	tristate "Surface Hot-Plug Driver"
+	depends on GPIOLIB
+	help
+	  Driver for out-of-band hot-plug event signaling on Microsoft Surface
+	  devices with hot-pluggable PCIe cards.
+
+	  This driver is used on Surface Book (2 and 3) devices with a
+	  hot-pluggable discrete GPU (dGPU). When not in use, the dGPU on those
+	  devices can enter D3cold, which prevents in-band (standard) PCIe
+	  hot-plug signaling. Thus, without this driver, detaching the base
+	  containing the dGPU will not correctly update the state of the
+	  corresponding PCIe device if it is in D3cold. This driver adds support
+	  for out-of-band hot-plug notifications, ensuring that the device state
+	  is properly updated even when the device in question is in D3cold.
+
+	  Select M or Y here, if you want to (fully) support hot-plugging of
+	  dGPU devices on the Surface Book 2 and/or 3 during D3cold.
+
 config SURFACE_PRO3_BUTTON
 	tristate "Power/home/volume buttons driver for Microsoft Surface Pro 3/4 tablet"
 	depends on INPUT
 	help
 	  This driver handles the power/home/volume buttons on the Microsoft Surface Pro 3/4 tablet.
 
+source "drivers/platform/surface/aggregator/Kconfig"
+
 endif # SURFACE_PLATFORMS
diff --git a/drivers/platform/surface/Makefile b/drivers/platform/surface/Makefile
index cedfb027ded1..990424c5f0c9 100644
--- a/drivers/platform/surface/Makefile
+++ b/drivers/platform/surface/Makefile
@@ -7,5 +7,9 @@
 obj-$(CONFIG_SURFACE3_WMI)		+= surface3-wmi.o
 obj-$(CONFIG_SURFACE_3_BUTTON)		+= surface3_button.o
 obj-$(CONFIG_SURFACE_3_POWER_OPREGION)	+= surface3_power.o
+obj-$(CONFIG_SURFACE_ACPI_NOTIFY)	+= surface_acpi_notify.o
+obj-$(CONFIG_SURFACE_AGGREGATOR)	+= aggregator/
+obj-$(CONFIG_SURFACE_AGGREGATOR_CDEV)	+= surface_aggregator_cdev.o
 obj-$(CONFIG_SURFACE_GPE)		+= surface_gpe.o
+obj-$(CONFIG_SURFACE_HOTPLUG)		+= surface_hotplug.o
 obj-$(CONFIG_SURFACE_PRO3_BUTTON)	+= surfacepro3_button.o
diff --git a/drivers/platform/surface/aggregator/Kconfig b/drivers/platform/surface/aggregator/Kconfig
new file mode 100644
index 000000000000..3aaeea9f0433
--- /dev/null
+++ b/drivers/platform/surface/aggregator/Kconfig
@@ -0,0 +1,68 @@
+# SPDX-License-Identifier: GPL-2.0+
+# Copyright (C) 2019-2020 Maximilian Luz <luzmaximilian@gmail.com>
+
+menuconfig SURFACE_AGGREGATOR
+	tristate "Microsoft Surface System Aggregator Module Subsystem and Drivers"
+	depends on SERIAL_DEV_BUS
+	select CRC_CCITT
+	help
+	  The Surface System Aggregator Module (Surface SAM or SSAM) is an
+	  embedded controller (EC) found on 5th- and later-generation Microsoft
+	  Surface devices (i.e. Surface Pro 5, Surface Book 2, Surface Laptop,
+	  and newer, with exception of Surface Go series devices).
+
+	  Depending on the device in question, this EC provides varying
+	  functionality, including:
+	  - EC access from ACPI via Surface ACPI Notify (5th- and 6th-generation)
+	  - battery status information (all devices)
+	  - thermal sensor access (all devices)
+	  - performance mode / cooling mode control (all devices)
+	  - clipboard detachment system control (Surface Book 2 and 3)
+	  - HID / keyboard input (Surface Laptops, Surface Book 3)
+
+	  This option controls whether the Surface SAM subsystem core will be
+	  built. This includes a driver for the Surface Serial Hub (SSH), which
+	  is the device responsible for the communication with the EC, and a
+	  basic kernel interface exposing the EC functionality to other client
+	  drivers, i.e. allowing them to make requests to the EC and receive
+	  events from it. Selecting this option alone will not provide any
+	  client drivers and therefore no functionality beyond the in-kernel
+	  interface. Said functionality is the responsibility of the respective
+	  client drivers.
+
+	  Note: While 4th-generation Surface devices also make use of a SAM EC,
+	  due to a difference in the communication interface of the controller,
+	  only 5th and later generations are currently supported. Specifically,
+	  devices using SAM-over-SSH are supported, whereas devices using
+	  SAM-over-HID, which is used on the 4th generation, are currently not
+	  supported.
+
+	  Choose m if you want to build the SAM subsystem core and SSH driver as
+	  module, y if you want to build it into the kernel and n if you don't
+	  want it at all.
+
+config SURFACE_AGGREGATOR_BUS
+	bool "Surface System Aggregator Module Bus"
+	depends on SURFACE_AGGREGATOR
+	default y
+	help
+	  Expands the Surface System Aggregator Module (SSAM) core driver by
+	  providing a dedicated bus and client-device type.
+
+	  This bus and device type are intended to provide and simplify support
+	  for non-platform and non-ACPI SSAM devices, i.e. SSAM devices that are
+	  not auto-detectable via the conventional means (e.g. ACPI).
+
+config SURFACE_AGGREGATOR_ERROR_INJECTION
+	bool "Surface System Aggregator Module Error Injection Capabilities"
+	depends on SURFACE_AGGREGATOR
+	depends on FUNCTION_ERROR_INJECTION
+	help
+	  Provides error-injection capabilities for the Surface System
+	  Aggregator Module subsystem and Surface Serial Hub driver.
+
+	  Specifically, exports error injection hooks to be used with the
+	  kernel's function error injection capabilities to simulate underlying
+	  transport and communication problems, such as invalid data sent to or
+	  received from the EC, dropped data, and communication timeouts.
+	  Intended for development and debugging.
diff --git a/drivers/platform/surface/aggregator/Makefile b/drivers/platform/surface/aggregator/Makefile
new file mode 100644
index 000000000000..c112e2c7112b
--- /dev/null
+++ b/drivers/platform/surface/aggregator/Makefile
@@ -0,0 +1,17 @@
+# SPDX-License-Identifier: GPL-2.0+
+# Copyright (C) 2019-2020 Maximilian Luz <luzmaximilian@gmail.com>
+
+# For include/trace/define_trace.h to include trace.h
+CFLAGS_core.o = -I$(src)
+
+obj-$(CONFIG_SURFACE_AGGREGATOR) += surface_aggregator.o
+
+surface_aggregator-objs := core.o
+surface_aggregator-objs += ssh_parser.o
+surface_aggregator-objs += ssh_packet_layer.o
+surface_aggregator-objs += ssh_request_layer.o
+surface_aggregator-objs += controller.o
+
+ifeq ($(CONFIG_SURFACE_AGGREGATOR_BUS),y)
+surface_aggregator-objs += bus.o
+endif
diff --git a/drivers/platform/surface/aggregator/bus.c b/drivers/platform/surface/aggregator/bus.c
new file mode 100644
index 000000000000..a9b660af0917
--- /dev/null
+++ b/drivers/platform/surface/aggregator/bus.c
@@ -0,0 +1,415 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Surface System Aggregator Module bus and device integration.
+ *
+ * Copyright (C) 2019-2020 Maximilian Luz <luzmaximilian@gmail.com>
+ */
+
+#include <linux/device.h>
+#include <linux/slab.h>
+
+#include <linux/surface_aggregator/controller.h>
+#include <linux/surface_aggregator/device.h>
+
+#include "bus.h"
+#include "controller.h"
+
+static ssize_t modalias_show(struct device *dev, struct device_attribute *attr,
+			     char *buf)
+{
+	struct ssam_device *sdev = to_ssam_device(dev);
+
+	return sysfs_emit(buf, "ssam:d%02Xc%02Xt%02Xi%02Xf%02X\n",
+			sdev->uid.domain, sdev->uid.category, sdev->uid.target,
+			sdev->uid.instance, sdev->uid.function);
+}
+static DEVICE_ATTR_RO(modalias);
+
+static struct attribute *ssam_device_attrs[] = {
+	&dev_attr_modalias.attr,
+	NULL,
+};
+ATTRIBUTE_GROUPS(ssam_device);
+
+static int ssam_device_uevent(struct device *dev, struct kobj_uevent_env *env)
+{
+	struct ssam_device *sdev = to_ssam_device(dev);
+
+	return add_uevent_var(env, "MODALIAS=ssam:d%02Xc%02Xt%02Xi%02Xf%02X",
+			      sdev->uid.domain, sdev->uid.category,
+			      sdev->uid.target, sdev->uid.instance,
+			      sdev->uid.function);
+}
+
+static void ssam_device_release(struct device *dev)
+{
+	struct ssam_device *sdev = to_ssam_device(dev);
+
+	ssam_controller_put(sdev->ctrl);
+	kfree(sdev);
+}
+
+const struct device_type ssam_device_type = {
+	.name    = "surface_aggregator_device",
+	.groups  = ssam_device_groups,
+	.uevent  = ssam_device_uevent,
+	.release = ssam_device_release,
+};
+EXPORT_SYMBOL_GPL(ssam_device_type);
+
+/**
+ * ssam_device_alloc() - Allocate and initialize a SSAM client device.
+ * @ctrl: The controller under which the device should be added.
+ * @uid:  The UID of the device to be added.
+ *
+ * Allocates and initializes a new client device. The parent of the device
+ * will be set to the controller device and the name will be set based on the
+ * UID. Note that the device still has to be added via ssam_device_add().
+ * Refer to that function for more details.
+ *
+ * Return: Returns the newly allocated and initialized SSAM client device, or
+ * %NULL if it could not be allocated.
+ */
+struct ssam_device *ssam_device_alloc(struct ssam_controller *ctrl,
+				      struct ssam_device_uid uid)
+{
+	struct ssam_device *sdev;
+
+	sdev = kzalloc(sizeof(*sdev), GFP_KERNEL);
+	if (!sdev)
+		return NULL;
+
+	device_initialize(&sdev->dev);
+	sdev->dev.bus = &ssam_bus_type;
+	sdev->dev.type = &ssam_device_type;
+	sdev->dev.parent = ssam_controller_device(ctrl);
+	sdev->ctrl = ssam_controller_get(ctrl);
+	sdev->uid = uid;
+
+	dev_set_name(&sdev->dev, "%02x:%02x:%02x:%02x:%02x",
+		     sdev->uid.domain, sdev->uid.category, sdev->uid.target,
+		     sdev->uid.instance, sdev->uid.function);
+
+	return sdev;
+}
+EXPORT_SYMBOL_GPL(ssam_device_alloc);
+
+/**
+ * ssam_device_add() - Add a SSAM client device.
+ * @sdev: The SSAM client device to be added.
+ *
+ * Added client devices must be guaranteed to always have a valid and active
+ * controller. Thus, this function will fail with %-ENODEV if the controller
+ * of the device has not been initialized yet, has been suspended, or has been
+ * shut down.
+ *
+ * The caller of this function should ensure that the corresponding call to
+ * ssam_device_remove() is issued before the controller is shut down. If the
+ * added device is a direct child of the controller device (default), it will
+ * be automatically removed when the controller is shut down.
+ *
+ * By default, the controller device will become the parent of the newly
+ * created client device. The parent may be changed before ssam_device_add is
+ * called, but care must be taken that a) the correct suspend/resume ordering
+ * is guaranteed and b) the client device does not outlive the controller,
+ * i.e. that the device is removed before the controller is being shut down.
+ * In case these guarantees have to be manually enforced, please refer to the
+ * ssam_client_link() and ssam_client_bind() functions, which are intended to
+ * set up device-links for this purpose.
+ *
+ * Return: Returns zero on success, a negative error code on failure.
+ */
+int ssam_device_add(struct ssam_device *sdev)
+{
+	int status;
+
+	/*
+	 * Ensure that we can only add new devices to a controller if it has
+	 * been started and is not going away soon. This works in combination
+	 * with ssam_controller_remove_clients to ensure driver presence for the
+	 * controller device, i.e. it ensures that the controller (sdev->ctrl)
+	 * is always valid and can be used for requests as long as the client
+	 * device we add here is registered as child under it. This essentially
+	 * guarantees that the client driver can always expect the preconditions
+	 * for functions like ssam_request_sync (controller has to be started
+	 * and is not suspended) to hold and thus does not have to check for
+	 * them.
+	 *
+	 * Note that for this to work, the controller has to be a parent device.
+	 * If it is not a direct parent, care has to be taken that the device is
+	 * removed via ssam_device_remove(), as device_unregister does not
+	 * remove child devices recursively.
+	 */
+	ssam_controller_statelock(sdev->ctrl);
+
+	if (sdev->ctrl->state != SSAM_CONTROLLER_STARTED) {
+		ssam_controller_stateunlock(sdev->ctrl);
+		return -ENODEV;
+	}
+
+	status = device_add(&sdev->dev);
+
+	ssam_controller_stateunlock(sdev->ctrl);
+	return status;
+}
+EXPORT_SYMBOL_GPL(ssam_device_add);
+
+/**
+ * ssam_device_remove() - Remove a SSAM client device.
+ * @sdev: The device to remove.
+ *
+ * Removes and unregisters the provided SSAM client device.
+ */
+void ssam_device_remove(struct ssam_device *sdev)
+{
+	device_unregister(&sdev->dev);
+}
+EXPORT_SYMBOL_GPL(ssam_device_remove);
+
+/**
+ * ssam_device_id_compatible() - Check if a device ID matches a UID.
+ * @id:  The device ID as potential match.
+ * @uid: The device UID matching against.
+ *
+ * Check if the given ID is a match for the given UID, i.e. if a device with
+ * the provided UID is compatible to the given ID following the match rules
+ * described in its &ssam_device_id.match_flags member.
+ *
+ * Return: Returns %true if the given UID is compatible to the match rule
+ * described by the given ID, %false otherwise.
+ */
+static bool ssam_device_id_compatible(const struct ssam_device_id *id,
+				      struct ssam_device_uid uid)
+{
+	if (id->domain != uid.domain || id->category != uid.category)
+		return false;
+
+	if ((id->match_flags & SSAM_MATCH_TARGET) && id->target != uid.target)
+		return false;
+
+	if ((id->match_flags & SSAM_MATCH_INSTANCE) && id->instance != uid.instance)
+		return false;
+
+	if ((id->match_flags & SSAM_MATCH_FUNCTION) && id->function != uid.function)
+		return false;
+
+	return true;
+}
+
+/**
+ * ssam_device_id_is_null() - Check if a device ID is null.
+ * @id: The device ID to check.
+ *
+ * Check if a given device ID is null, i.e. all zeros. Used to check for the
+ * end of ``MODULE_DEVICE_TABLE(ssam, ...)`` or similar lists.
+ *
+ * Return: Returns %true if the given ID represents a null ID, %false
+ * otherwise.
+ */
+static bool ssam_device_id_is_null(const struct ssam_device_id *id)
+{
+	return id->match_flags == 0 &&
+		id->domain == 0 &&
+		id->category == 0 &&
+		id->target == 0 &&
+		id->instance == 0 &&
+		id->function == 0 &&
+		id->driver_data == 0;
+}
+
+/**
+ * ssam_device_id_match() - Find the matching ID table entry for the given UID.
+ * @table: The table to search in.
+ * @uid:   The UID to matched against the individual table entries.
+ *
+ * Find the first match for the provided device UID in the provided ID table
+ * and return it. Returns %NULL if no match could be found.
+ */
+const struct ssam_device_id *ssam_device_id_match(const struct ssam_device_id *table,
+						  const struct ssam_device_uid uid)
+{
+	const struct ssam_device_id *id;
+
+	for (id = table; !ssam_device_id_is_null(id); ++id)
+		if (ssam_device_id_compatible(id, uid))
+			return id;
+
+	return NULL;
+}
+EXPORT_SYMBOL_GPL(ssam_device_id_match);
+
+/**
+ * ssam_device_get_match() - Find and return the ID matching the device in the
+ * ID table of the bound driver.
+ * @dev: The device for which to get the matching ID table entry.
+ *
+ * Find the fist match for the UID of the device in the ID table of the
+ * currently bound driver and return it. Returns %NULL if the device does not
+ * have a driver bound to it, the driver does not have match_table (i.e. it is
+ * %NULL), or there is no match in the driver's match_table.
+ *
+ * This function essentially calls ssam_device_id_match() with the ID table of
+ * the bound device driver and the UID of the device.
+ *
+ * Return: Returns the first match for the UID of the device in the device
+ * driver's match table, or %NULL if no such match could be found.
+ */
+const struct ssam_device_id *ssam_device_get_match(const struct ssam_device *dev)
+{
+	const struct ssam_device_driver *sdrv;
+
+	sdrv = to_ssam_device_driver(dev->dev.driver);
+	if (!sdrv)
+		return NULL;
+
+	if (!sdrv->match_table)
+		return NULL;
+
+	return ssam_device_id_match(sdrv->match_table, dev->uid);
+}
+EXPORT_SYMBOL_GPL(ssam_device_get_match);
+
+/**
+ * ssam_device_get_match_data() - Find the ID matching the device in the
+ * ID table of the bound driver and return its ``driver_data`` member.
+ * @dev: The device for which to get the match data.
+ *
+ * Find the fist match for the UID of the device in the ID table of the
+ * corresponding driver and return its driver_data. Returns %NULL if the
+ * device does not have a driver bound to it, the driver does not have
+ * match_table (i.e. it is %NULL), there is no match in the driver's
+ * match_table, or the match does not have any driver_data.
+ *
+ * This function essentially calls ssam_device_get_match() and, if any match
+ * could be found, returns its ``struct ssam_device_id.driver_data`` member.
+ *
+ * Return: Returns the driver data associated with the first match for the UID
+ * of the device in the device driver's match table, or %NULL if no such match
+ * could be found.
+ */
+const void *ssam_device_get_match_data(const struct ssam_device *dev)
+{
+	const struct ssam_device_id *id;
+
+	id = ssam_device_get_match(dev);
+	if (!id)
+		return NULL;
+
+	return (const void *)id->driver_data;
+}
+EXPORT_SYMBOL_GPL(ssam_device_get_match_data);
+
+static int ssam_bus_match(struct device *dev, struct device_driver *drv)
+{
+	struct ssam_device_driver *sdrv = to_ssam_device_driver(drv);
+	struct ssam_device *sdev = to_ssam_device(dev);
+
+	if (!is_ssam_device(dev))
+		return 0;
+
+	return !!ssam_device_id_match(sdrv->match_table, sdev->uid);
+}
+
+static int ssam_bus_probe(struct device *dev)
+{
+	return to_ssam_device_driver(dev->driver)
+		->probe(to_ssam_device(dev));
+}
+
+static int ssam_bus_remove(struct device *dev)
+{
+	struct ssam_device_driver *sdrv = to_ssam_device_driver(dev->driver);
+
+	if (sdrv->remove)
+		sdrv->remove(to_ssam_device(dev));
+
+	return 0;
+}
+
+struct bus_type ssam_bus_type = {
+	.name   = "surface_aggregator",
+	.match  = ssam_bus_match,
+	.probe  = ssam_bus_probe,
+	.remove = ssam_bus_remove,
+};
+EXPORT_SYMBOL_GPL(ssam_bus_type);
+
+/**
+ * __ssam_device_driver_register() - Register a SSAM client device driver.
+ * @sdrv:  The driver to register.
+ * @owner: The module owning the provided driver.
+ *
+ * Please refer to the ssam_device_driver_register() macro for the normal way
+ * to register a driver from inside its owning module.
+ */
+int __ssam_device_driver_register(struct ssam_device_driver *sdrv,
+				  struct module *owner)
+{
+	sdrv->driver.owner = owner;
+	sdrv->driver.bus = &ssam_bus_type;
+
+	/* force drivers to async probe so I/O is possible in probe */
+	sdrv->driver.probe_type = PROBE_PREFER_ASYNCHRONOUS;
+
+	return driver_register(&sdrv->driver);
+}
+EXPORT_SYMBOL_GPL(__ssam_device_driver_register);
+
+/**
+ * ssam_device_driver_unregister - Unregister a SSAM device driver.
+ * @sdrv: The driver to unregister.
+ */
+void ssam_device_driver_unregister(struct ssam_device_driver *sdrv)
+{
+	driver_unregister(&sdrv->driver);
+}
+EXPORT_SYMBOL_GPL(ssam_device_driver_unregister);
+
+static int ssam_remove_device(struct device *dev, void *_data)
+{
+	struct ssam_device *sdev = to_ssam_device(dev);
+
+	if (is_ssam_device(dev))
+		ssam_device_remove(sdev);
+
+	return 0;
+}
+
+/**
+ * ssam_controller_remove_clients() - Remove SSAM client devices registered as
+ * direct children under the given controller.
+ * @ctrl: The controller to remove all direct clients for.
+ *
+ * Remove all SSAM client devices registered as direct children under the
+ * given controller. Note that this only accounts for direct children of the
+ * controller device. This does not take care of any client devices where the
+ * parent device has been manually set before calling ssam_device_add. Refer
+ * to ssam_device_add()/ssam_device_remove() for more details on those cases.
+ *
+ * To avoid new devices being added in parallel to this call, the main
+ * controller lock (not statelock) must be held during this (and if
+ * necessary, any subsequent deinitialization) call.
+ */
+void ssam_controller_remove_clients(struct ssam_controller *ctrl)
+{
+	struct device *dev;
+
+	dev = ssam_controller_device(ctrl);
+	device_for_each_child_reverse(dev, NULL, ssam_remove_device);
+}
+
+/**
+ * ssam_bus_register() - Register and set-up the SSAM client device bus.
+ */
+int ssam_bus_register(void)
+{
+	return bus_register(&ssam_bus_type);
+}
+
+/**
+ * ssam_bus_unregister() - Unregister the SSAM client device bus.
+ */
+void ssam_bus_unregister(void)
+{
+	return bus_unregister(&ssam_bus_type);
+}
diff --git a/drivers/platform/surface/aggregator/bus.h b/drivers/platform/surface/aggregator/bus.h
new file mode 100644
index 000000000000..7712baaed6a5
--- /dev/null
+++ b/drivers/platform/surface/aggregator/bus.h
@@ -0,0 +1,27 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Surface System Aggregator Module bus and device integration.
+ *
+ * Copyright (C) 2019-2020 Maximilian Luz <luzmaximilian@gmail.com>
+ */
+
+#ifndef _SURFACE_AGGREGATOR_BUS_H
+#define _SURFACE_AGGREGATOR_BUS_H
+
+#include <linux/surface_aggregator/controller.h>
+
+#ifdef CONFIG_SURFACE_AGGREGATOR_BUS
+
+void ssam_controller_remove_clients(struct ssam_controller *ctrl);
+
+int ssam_bus_register(void);
+void ssam_bus_unregister(void);
+
+#else /* CONFIG_SURFACE_AGGREGATOR_BUS */
+
+static inline void ssam_controller_remove_clients(struct ssam_controller *ctrl) {}
+static inline int ssam_bus_register(void) { return 0; }
+static inline void ssam_bus_unregister(void) {}
+
+#endif /* CONFIG_SURFACE_AGGREGATOR_BUS */
+#endif /* _SURFACE_AGGREGATOR_BUS_H */
diff --git a/drivers/platform/surface/aggregator/controller.c b/drivers/platform/surface/aggregator/controller.c
new file mode 100644
index 000000000000..5bcb59ed579d
--- /dev/null
+++ b/drivers/platform/surface/aggregator/controller.c
@@ -0,0 +1,2579 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Main SSAM/SSH controller structure and functionality.
+ *
+ * Copyright (C) 2019-2020 Maximilian Luz <luzmaximilian@gmail.com>
+ */
+
+#include <linux/acpi.h>
+#include <linux/atomic.h>
+#include <linux/completion.h>
+#include <linux/gpio/consumer.h>
+#include <linux/interrupt.h>
+#include <linux/kref.h>
+#include <linux/limits.h>
+#include <linux/list.h>
+#include <linux/lockdep.h>
+#include <linux/mutex.h>
+#include <linux/rculist.h>
+#include <linux/rbtree.h>
+#include <linux/rwsem.h>
+#include <linux/serdev.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+#include <linux/srcu.h>
+#include <linux/types.h>
+#include <linux/workqueue.h>
+
+#include <linux/surface_aggregator/controller.h>
+#include <linux/surface_aggregator/serial_hub.h>
+
+#include "controller.h"
+#include "ssh_msgb.h"
+#include "ssh_request_layer.h"
+
+#include "trace.h"
+
+
+/* -- Safe counters. -------------------------------------------------------- */
+
+/**
+ * ssh_seq_reset() - Reset/initialize sequence ID counter.
+ * @c: The counter to reset.
+ */
+static void ssh_seq_reset(struct ssh_seq_counter *c)
+{
+	WRITE_ONCE(c->value, 0);
+}
+
+/**
+ * ssh_seq_next() - Get next sequence ID.
+ * @c: The counter providing the sequence IDs.
+ *
+ * Return: Returns the next sequence ID of the counter.
+ */
+static u8 ssh_seq_next(struct ssh_seq_counter *c)
+{
+	u8 old = READ_ONCE(c->value);
+	u8 new = old + 1;
+	u8 ret;
+
+	while (unlikely((ret = cmpxchg(&c->value, old, new)) != old)) {
+		old = ret;
+		new = old + 1;
+	}
+
+	return old;
+}
+
+/**
+ * ssh_rqid_reset() - Reset/initialize request ID counter.
+ * @c: The counter to reset.
+ */
+static void ssh_rqid_reset(struct ssh_rqid_counter *c)
+{
+	WRITE_ONCE(c->value, 0);
+}
+
+/**
+ * ssh_rqid_next() - Get next request ID.
+ * @c: The counter providing the request IDs.
+ *
+ * Return: Returns the next request ID of the counter, skipping any reserved
+ * request IDs.
+ */
+static u16 ssh_rqid_next(struct ssh_rqid_counter *c)
+{
+	u16 old = READ_ONCE(c->value);
+	u16 new = ssh_rqid_next_valid(old);
+	u16 ret;
+
+	while (unlikely((ret = cmpxchg(&c->value, old, new)) != old)) {
+		old = ret;
+		new = ssh_rqid_next_valid(old);
+	}
+
+	return old;
+}
+
+
+/* -- Event notifier/callbacks. --------------------------------------------- */
+/*
+ * The notifier system is based on linux/notifier.h, specifically the SRCU
+ * implementation. The difference to that is, that some bits of the notifier
+ * call return value can be tracked across multiple calls. This is done so
+ * that handling of events can be tracked and a warning can be issued in case
+ * an event goes unhandled. The idea of that warning is that it should help
+ * discover and identify new/currently unimplemented features.
+ */
+
+/**
+ * ssam_event_matches_notifier() - Test if an event matches a notifier.
+ * @n: The event notifier to test against.
+ * @event: The event to test.
+ *
+ * Return: Returns %true if the given event matches the given notifier
+ * according to the rules set in the notifier's event mask, %false otherwise.
+ */
+static bool ssam_event_matches_notifier(const struct ssam_event_notifier *n,
+					const struct ssam_event *event)
+{
+	bool match = n->event.id.target_category == event->target_category;
+
+	if (n->event.mask & SSAM_EVENT_MASK_TARGET)
+		match &= n->event.reg.target_id == event->target_id;
+
+	if (n->event.mask & SSAM_EVENT_MASK_INSTANCE)
+		match &= n->event.id.instance == event->instance_id;
+
+	return match;
+}
+
+/**
+ * ssam_nfblk_call_chain() - Call event notifier callbacks of the given chain.
+ * @nh:    The notifier head for which the notifier callbacks should be called.
+ * @event: The event data provided to the callbacks.
+ *
+ * Call all registered notifier callbacks in order of their priority until
+ * either no notifier is left or a notifier returns a value with the
+ * %SSAM_NOTIF_STOP bit set. Note that this bit is automatically set via
+ * ssam_notifier_from_errno() on any non-zero error value.
+ *
+ * Return: Returns the notifier status value, which contains the notifier
+ * status bits (%SSAM_NOTIF_HANDLED and %SSAM_NOTIF_STOP) as well as a
+ * potential error value returned from the last executed notifier callback.
+ * Use ssam_notifier_to_errno() to convert this value to the original error
+ * value.
+ */
+static int ssam_nfblk_call_chain(struct ssam_nf_head *nh, struct ssam_event *event)
+{
+	struct ssam_event_notifier *nf;
+	int ret = 0, idx;
+
+	idx = srcu_read_lock(&nh->srcu);
+
+	list_for_each_entry_rcu(nf, &nh->head, base.node,
+				srcu_read_lock_held(&nh->srcu)) {
+		if (ssam_event_matches_notifier(nf, event)) {
+			ret = (ret & SSAM_NOTIF_STATE_MASK) | nf->base.fn(nf, event);
+			if (ret & SSAM_NOTIF_STOP)
+				break;
+		}
+	}
+
+	srcu_read_unlock(&nh->srcu, idx);
+	return ret;
+}
+
+/**
+ * ssam_nfblk_insert() - Insert a new notifier block into the given notifier
+ * list.
+ * @nh: The notifier head into which the block should be inserted.
+ * @nb: The notifier block to add.
+ *
+ * Note: This function must be synchronized by the caller with respect to other
+ * insert, find, and/or remove calls by holding ``struct ssam_nf.lock``.
+ *
+ * Return: Returns zero on success, %-EEXIST if the notifier block has already
+ * been registered.
+ */
+static int ssam_nfblk_insert(struct ssam_nf_head *nh, struct ssam_notifier_block *nb)
+{
+	struct ssam_notifier_block *p;
+	struct list_head *h;
+
+	/* Runs under lock, no need for RCU variant. */
+	list_for_each(h, &nh->head) {
+		p = list_entry(h, struct ssam_notifier_block, node);
+
+		if (unlikely(p == nb)) {
+			WARN(1, "double register detected");
+			return -EEXIST;
+		}
+
+		if (nb->priority > p->priority)
+			break;
+	}
+
+	list_add_tail_rcu(&nb->node, h);
+	return 0;
+}
+
+/**
+ * ssam_nfblk_find() - Check if a notifier block is registered on the given
+ * notifier head.
+ * list.
+ * @nh: The notifier head on which to search.
+ * @nb: The notifier block to search for.
+ *
+ * Note: This function must be synchronized by the caller with respect to other
+ * insert, find, and/or remove calls by holding ``struct ssam_nf.lock``.
+ *
+ * Return: Returns true if the given notifier block is registered on the given
+ * notifier head, false otherwise.
+ */
+static bool ssam_nfblk_find(struct ssam_nf_head *nh, struct ssam_notifier_block *nb)
+{
+	struct ssam_notifier_block *p;
+
+	/* Runs under lock, no need for RCU variant. */
+	list_for_each_entry(p, &nh->head, node) {
+		if (p == nb)
+			return true;
+	}
+
+	return false;
+}
+
+/**
+ * ssam_nfblk_remove() - Remove a notifier block from its notifier list.
+ * @nb: The notifier block to be removed.
+ *
+ * Note: This function must be synchronized by the caller with respect to
+ * other insert, find, and/or remove calls by holding ``struct ssam_nf.lock``.
+ * Furthermore, the caller _must_ ensure SRCU synchronization by calling
+ * synchronize_srcu() with ``nh->srcu`` after leaving the critical section, to
+ * ensure that the removed notifier block is not in use any more.
+ */
+static void ssam_nfblk_remove(struct ssam_notifier_block *nb)
+{
+	list_del_rcu(&nb->node);
+}
+
+/**
+ * ssam_nf_head_init() - Initialize the given notifier head.
+ * @nh: The notifier head to initialize.
+ */
+static int ssam_nf_head_init(struct ssam_nf_head *nh)
+{
+	int status;
+
+	status = init_srcu_struct(&nh->srcu);
+	if (status)
+		return status;
+
+	INIT_LIST_HEAD(&nh->head);
+	return 0;
+}
+
+/**
+ * ssam_nf_head_destroy() - Deinitialize the given notifier head.
+ * @nh: The notifier head to deinitialize.
+ */
+static void ssam_nf_head_destroy(struct ssam_nf_head *nh)
+{
+	cleanup_srcu_struct(&nh->srcu);
+}
+
+
+/* -- Event/notification registry. ------------------------------------------ */
+
+/**
+ * struct ssam_nf_refcount_key - Key used for event activation reference
+ * counting.
+ * @reg: The registry via which the event is enabled/disabled.
+ * @id:  The ID uniquely describing the event.
+ */
+struct ssam_nf_refcount_key {
+	struct ssam_event_registry reg;
+	struct ssam_event_id id;
+};
+
+/**
+ * struct ssam_nf_refcount_entry - RB-tree entry for reference counting event
+ * activations.
+ * @node:     The node of this entry in the rb-tree.
+ * @key:      The key of the event.
+ * @refcount: The reference-count of the event.
+ * @flags:    The flags used when enabling the event.
+ */
+struct ssam_nf_refcount_entry {
+	struct rb_node node;
+	struct ssam_nf_refcount_key key;
+	int refcount;
+	u8 flags;
+};
+
+/**
+ * ssam_nf_refcount_inc() - Increment reference-/activation-count of the given
+ * event.
+ * @nf:  The notifier system reference.
+ * @reg: The registry used to enable/disable the event.
+ * @id:  The event ID.
+ *
+ * Increments the reference-/activation-count associated with the specified
+ * event type/ID, allocating a new entry for this event ID if necessary. A
+ * newly allocated entry will have a refcount of one.
+ *
+ * Note: ``nf->lock`` must be held when calling this function.
+ *
+ * Return: Returns the refcount entry on success. Returns an error pointer
+ * with %-ENOSPC if there have already been %INT_MAX events of the specified
+ * ID and type registered, or %-ENOMEM if the entry could not be allocated.
+ */
+static struct ssam_nf_refcount_entry *
+ssam_nf_refcount_inc(struct ssam_nf *nf, struct ssam_event_registry reg,
+		     struct ssam_event_id id)
+{
+	struct ssam_nf_refcount_entry *entry;
+	struct ssam_nf_refcount_key key;
+	struct rb_node **link = &nf->refcount.rb_node;
+	struct rb_node *parent = NULL;
+	int cmp;
+
+	lockdep_assert_held(&nf->lock);
+
+	key.reg = reg;
+	key.id = id;
+
+	while (*link) {
+		entry = rb_entry(*link, struct ssam_nf_refcount_entry, node);
+		parent = *link;
+
+		cmp = memcmp(&key, &entry->key, sizeof(key));
+		if (cmp < 0) {
+			link = &(*link)->rb_left;
+		} else if (cmp > 0) {
+			link = &(*link)->rb_right;
+		} else if (entry->refcount < INT_MAX) {
+			entry->refcount++;
+			return entry;
+		} else {
+			WARN_ON(1);
+			return ERR_PTR(-ENOSPC);
+		}
+	}
+
+	entry = kzalloc(sizeof(*entry), GFP_KERNEL);
+	if (!entry)
+		return ERR_PTR(-ENOMEM);
+
+	entry->key = key;
+	entry->refcount = 1;
+
+	rb_link_node(&entry->node, parent, link);
+	rb_insert_color(&entry->node, &nf->refcount);
+
+	return entry;
+}
+
+/**
+ * ssam_nf_refcount_dec() - Decrement reference-/activation-count of the given
+ * event.
+ * @nf:  The notifier system reference.
+ * @reg: The registry used to enable/disable the event.
+ * @id:  The event ID.
+ *
+ * Decrements the reference-/activation-count of the specified event,
+ * returning its entry. If the returned entry has a refcount of zero, the
+ * caller is responsible for freeing it using kfree().
+ *
+ * Note: ``nf->lock`` must be held when calling this function.
+ *
+ * Return: Returns the refcount entry on success or %NULL if the entry has not
+ * been found.
+ */
+static struct ssam_nf_refcount_entry *
+ssam_nf_refcount_dec(struct ssam_nf *nf, struct ssam_event_registry reg,
+		     struct ssam_event_id id)
+{
+	struct ssam_nf_refcount_entry *entry;
+	struct ssam_nf_refcount_key key;
+	struct rb_node *node = nf->refcount.rb_node;
+	int cmp;
+
+	lockdep_assert_held(&nf->lock);
+
+	key.reg = reg;
+	key.id = id;
+
+	while (node) {
+		entry = rb_entry(node, struct ssam_nf_refcount_entry, node);
+
+		cmp = memcmp(&key, &entry->key, sizeof(key));
+		if (cmp < 0) {
+			node = node->rb_left;
+		} else if (cmp > 0) {
+			node = node->rb_right;
+		} else {
+			entry->refcount--;
+			if (entry->refcount == 0)
+				rb_erase(&entry->node, &nf->refcount);
+
+			return entry;
+		}
+	}
+
+	return NULL;
+}
+
+/**
+ * ssam_nf_refcount_empty() - Test if the notification system has any
+ * enabled/active events.
+ * @nf: The notification system.
+ */
+static bool ssam_nf_refcount_empty(struct ssam_nf *nf)
+{
+	return RB_EMPTY_ROOT(&nf->refcount);
+}
+
+/**
+ * ssam_nf_call() - Call notification callbacks for the provided event.
+ * @nf:    The notifier system
+ * @dev:   The associated device, only used for logging.
+ * @rqid:  The request ID of the event.
+ * @event: The event provided to the callbacks.
+ *
+ * Execute registered callbacks in order of their priority until either no
+ * callback is left or a callback returns a value with the %SSAM_NOTIF_STOP
+ * bit set. Note that this bit is set automatically when converting non-zero
+ * error values via ssam_notifier_from_errno() to notifier values.
+ *
+ * Also note that any callback that could handle an event should return a value
+ * with bit %SSAM_NOTIF_HANDLED set, indicating that the event does not go
+ * unhandled/ignored. In case no registered callback could handle an event,
+ * this function will emit a warning.
+ *
+ * In case a callback failed, this function will emit an error message.
+ */
+static void ssam_nf_call(struct ssam_nf *nf, struct device *dev, u16 rqid,
+			 struct ssam_event *event)
+{
+	struct ssam_nf_head *nf_head;
+	int status, nf_ret;
+
+	if (!ssh_rqid_is_event(rqid)) {
+		dev_warn(dev, "event: unsupported rqid: %#06x\n", rqid);
+		return;
+	}
+
+	nf_head = &nf->head[ssh_rqid_to_event(rqid)];
+	nf_ret = ssam_nfblk_call_chain(nf_head, event);
+	status = ssam_notifier_to_errno(nf_ret);
+
+	if (status < 0) {
+		dev_err(dev,
+			"event: error handling event: %d (tc: %#04x, tid: %#04x, cid: %#04x, iid: %#04x)\n",
+			status, event->target_category, event->target_id,
+			event->command_id, event->instance_id);
+	} else if (!(nf_ret & SSAM_NOTIF_HANDLED)) {
+		dev_warn(dev,
+			 "event: unhandled event (rqid: %#04x, tc: %#04x, tid: %#04x, cid: %#04x, iid: %#04x)\n",
+			 rqid, event->target_category, event->target_id,
+			 event->command_id, event->instance_id);
+	}
+}
+
+/**
+ * ssam_nf_init() - Initialize the notifier system.
+ * @nf: The notifier system to initialize.
+ */
+static int ssam_nf_init(struct ssam_nf *nf)
+{
+	int i, status;
+
+	for (i = 0; i < SSH_NUM_EVENTS; i++) {
+		status = ssam_nf_head_init(&nf->head[i]);
+		if (status)
+			break;
+	}
+
+	if (status) {
+		while (i--)
+			ssam_nf_head_destroy(&nf->head[i]);
+
+		return status;
+	}
+
+	mutex_init(&nf->lock);
+	return 0;
+}
+
+/**
+ * ssam_nf_destroy() - Deinitialize the notifier system.
+ * @nf: The notifier system to deinitialize.
+ */
+static void ssam_nf_destroy(struct ssam_nf *nf)
+{
+	int i;
+
+	for (i = 0; i < SSH_NUM_EVENTS; i++)
+		ssam_nf_head_destroy(&nf->head[i]);
+
+	mutex_destroy(&nf->lock);
+}
+
+
+/* -- Event/async request completion system. -------------------------------- */
+
+#define SSAM_CPLT_WQ_NAME	"ssam_cpltq"
+
+/*
+ * SSAM_CPLT_WQ_BATCH - Maximum number of event item completions executed per
+ * work execution. Used to prevent livelocking of the workqueue. Value chosen
+ * via educated guess, may be adjusted.
+ */
+#define SSAM_CPLT_WQ_BATCH	10
+
+/*
+ * SSAM_EVENT_ITEM_CACHE_PAYLOAD_LEN - Maximum payload length for a cached
+ * &struct ssam_event_item.
+ *
+ * This length has been chosen to be accommodate standard touchpad and
+ * keyboard input events. Events with larger payloads will be allocated
+ * separately.
+ */
+#define SSAM_EVENT_ITEM_CACHE_PAYLOAD_LEN	32
+
+static struct kmem_cache *ssam_event_item_cache;
+
+/**
+ * ssam_event_item_cache_init() - Initialize the event item cache.
+ */
+int ssam_event_item_cache_init(void)
+{
+	const unsigned int size = sizeof(struct ssam_event_item)
+				  + SSAM_EVENT_ITEM_CACHE_PAYLOAD_LEN;
+	const unsigned int align = __alignof__(struct ssam_event_item);
+	struct kmem_cache *cache;
+
+	cache = kmem_cache_create("ssam_event_item", size, align, 0, NULL);
+	if (!cache)
+		return -ENOMEM;
+
+	ssam_event_item_cache = cache;
+	return 0;
+}
+
+/**
+ * ssam_event_item_cache_destroy() - Deinitialize the event item cache.
+ */
+void ssam_event_item_cache_destroy(void)
+{
+	kmem_cache_destroy(ssam_event_item_cache);
+	ssam_event_item_cache = NULL;
+}
+
+static void __ssam_event_item_free_cached(struct ssam_event_item *item)
+{
+	kmem_cache_free(ssam_event_item_cache, item);
+}
+
+static void __ssam_event_item_free_generic(struct ssam_event_item *item)
+{
+	kfree(item);
+}
+
+/**
+ * ssam_event_item_free() - Free the provided event item.
+ * @item: The event item to free.
+ */
+static void ssam_event_item_free(struct ssam_event_item *item)
+{
+	trace_ssam_event_item_free(item);
+	item->ops.free(item);
+}
+
+/**
+ * ssam_event_item_alloc() - Allocate an event item with the given payload size.
+ * @len:   The event payload length.
+ * @flags: The flags used for allocation.
+ *
+ * Allocate an event item with the given payload size, preferring allocation
+ * from the event item cache if the payload is small enough (i.e. smaller than
+ * %SSAM_EVENT_ITEM_CACHE_PAYLOAD_LEN). Sets the item operations and payload
+ * length values. The item free callback (``ops.free``) should not be
+ * overwritten after this call.
+ *
+ * Return: Returns the newly allocated event item.
+ */
+static struct ssam_event_item *ssam_event_item_alloc(size_t len, gfp_t flags)
+{
+	struct ssam_event_item *item;
+
+	if (len <= SSAM_EVENT_ITEM_CACHE_PAYLOAD_LEN) {
+		item = kmem_cache_alloc(ssam_event_item_cache, flags);
+		if (!item)
+			return NULL;
+
+		item->ops.free = __ssam_event_item_free_cached;
+	} else {
+		item = kzalloc(struct_size(item, event.data, len), flags);
+		if (!item)
+			return NULL;
+
+		item->ops.free = __ssam_event_item_free_generic;
+	}
+
+	item->event.length = len;
+
+	trace_ssam_event_item_alloc(item, len);
+	return item;
+}
+
+/**
+ * ssam_event_queue_push() - Push an event item to the event queue.
+ * @q:    The event queue.
+ * @item: The item to add.
+ */
+static void ssam_event_queue_push(struct ssam_event_queue *q,
+				  struct ssam_event_item *item)
+{
+	spin_lock(&q->lock);
+	list_add_tail(&item->node, &q->head);
+	spin_unlock(&q->lock);
+}
+
+/**
+ * ssam_event_queue_pop() - Pop the next event item from the event queue.
+ * @q: The event queue.
+ *
+ * Returns and removes the next event item from the queue. Returns %NULL If
+ * there is no event item left.
+ */
+static struct ssam_event_item *ssam_event_queue_pop(struct ssam_event_queue *q)
+{
+	struct ssam_event_item *item;
+
+	spin_lock(&q->lock);
+	item = list_first_entry_or_null(&q->head, struct ssam_event_item, node);
+	if (item)
+		list_del(&item->node);
+	spin_unlock(&q->lock);
+
+	return item;
+}
+
+/**
+ * ssam_event_queue_is_empty() - Check if the event queue is empty.
+ * @q: The event queue.
+ */
+static bool ssam_event_queue_is_empty(struct ssam_event_queue *q)
+{
+	bool empty;
+
+	spin_lock(&q->lock);
+	empty = list_empty(&q->head);
+	spin_unlock(&q->lock);
+
+	return empty;
+}
+
+/**
+ * ssam_cplt_get_event_queue() - Get the event queue for the given parameters.
+ * @cplt: The completion system on which to look for the queue.
+ * @tid:  The target ID of the queue.
+ * @rqid: The request ID representing the event ID for which to get the queue.
+ *
+ * Return: Returns the event queue corresponding to the event type described
+ * by the given parameters. If the request ID does not represent an event,
+ * this function returns %NULL. If the target ID is not supported, this
+ * function will fall back to the default target ID (``tid = 1``).
+ */
+static
+struct ssam_event_queue *ssam_cplt_get_event_queue(struct ssam_cplt *cplt,
+						   u8 tid, u16 rqid)
+{
+	u16 event = ssh_rqid_to_event(rqid);
+	u16 tidx = ssh_tid_to_index(tid);
+
+	if (!ssh_rqid_is_event(rqid)) {
+		dev_err(cplt->dev, "event: unsupported request ID: %#06x\n", rqid);
+		return NULL;
+	}
+
+	if (!ssh_tid_is_valid(tid)) {
+		dev_warn(cplt->dev, "event: unsupported target ID: %u\n", tid);
+		tidx = 0;
+	}
+
+	return &cplt->event.target[tidx].queue[event];
+}
+
+/**
+ * ssam_cplt_submit() - Submit a work item to the completion system workqueue.
+ * @cplt: The completion system.
+ * @work: The work item to submit.
+ */
+static bool ssam_cplt_submit(struct ssam_cplt *cplt, struct work_struct *work)
+{
+	return queue_work(cplt->wq, work);
+}
+
+/**
+ * ssam_cplt_submit_event() - Submit an event to the completion system.
+ * @cplt: The completion system.
+ * @item: The event item to submit.
+ *
+ * Submits the event to the completion system by queuing it on the event item
+ * queue and queuing the respective event queue work item on the completion
+ * workqueue, which will eventually complete the event.
+ *
+ * Return: Returns zero on success, %-EINVAL if there is no event queue that
+ * can handle the given event item.
+ */
+static int ssam_cplt_submit_event(struct ssam_cplt *cplt,
+				  struct ssam_event_item *item)
+{
+	struct ssam_event_queue *evq;
+
+	evq = ssam_cplt_get_event_queue(cplt, item->event.target_id, item->rqid);
+	if (!evq)
+		return -EINVAL;
+
+	ssam_event_queue_push(evq, item);
+	ssam_cplt_submit(cplt, &evq->work);
+	return 0;
+}
+
+/**
+ * ssam_cplt_flush() - Flush the completion system.
+ * @cplt: The completion system.
+ *
+ * Flush the completion system by waiting until all currently submitted work
+ * items have been completed.
+ *
+ * Note: This function does not guarantee that all events will have been
+ * handled once this call terminates. In case of a larger number of
+ * to-be-completed events, the event queue work function may re-schedule its
+ * work item, which this flush operation will ignore.
+ *
+ * This operation is only intended to, during normal operation prior to
+ * shutdown, try to complete most events and requests to get them out of the
+ * system while the system is still fully operational. It does not aim to
+ * provide any guarantee that all of them have been handled.
+ */
+static void ssam_cplt_flush(struct ssam_cplt *cplt)
+{
+	flush_workqueue(cplt->wq);
+}
+
+static void ssam_event_queue_work_fn(struct work_struct *work)
+{
+	struct ssam_event_queue *queue;
+	struct ssam_event_item *item;
+	struct ssam_nf *nf;
+	struct device *dev;
+	unsigned int iterations = SSAM_CPLT_WQ_BATCH;
+
+	queue = container_of(work, struct ssam_event_queue, work);
+	nf = &queue->cplt->event.notif;
+	dev = queue->cplt->dev;
+
+	/* Limit number of processed events to avoid livelocking. */
+	do {
+		item = ssam_event_queue_pop(queue);
+		if (!item)
+			return;
+
+		ssam_nf_call(nf, dev, item->rqid, &item->event);
+		ssam_event_item_free(item);
+	} while (--iterations);
+
+	if (!ssam_event_queue_is_empty(queue))
+		ssam_cplt_submit(queue->cplt, &queue->work);
+}
+
+/**
+ * ssam_event_queue_init() - Initialize an event queue.
+ * @cplt: The completion system on which the queue resides.
+ * @evq:  The event queue to initialize.
+ */
+static void ssam_event_queue_init(struct ssam_cplt *cplt,
+				  struct ssam_event_queue *evq)
+{
+	evq->cplt = cplt;
+	spin_lock_init(&evq->lock);
+	INIT_LIST_HEAD(&evq->head);
+	INIT_WORK(&evq->work, ssam_event_queue_work_fn);
+}
+
+/**
+ * ssam_cplt_init() - Initialize completion system.
+ * @cplt: The completion system to initialize.
+ * @dev:  The device used for logging.
+ */
+static int ssam_cplt_init(struct ssam_cplt *cplt, struct device *dev)
+{
+	struct ssam_event_target *target;
+	int status, c, i;
+
+	cplt->dev = dev;
+
+	cplt->wq = create_workqueue(SSAM_CPLT_WQ_NAME);
+	if (!cplt->wq)
+		return -ENOMEM;
+
+	for (c = 0; c < ARRAY_SIZE(cplt->event.target); c++) {
+		target = &cplt->event.target[c];
+
+		for (i = 0; i < ARRAY_SIZE(target->queue); i++)
+			ssam_event_queue_init(cplt, &target->queue[i]);
+	}
+
+	status = ssam_nf_init(&cplt->event.notif);
+	if (status)
+		destroy_workqueue(cplt->wq);
+
+	return status;
+}
+
+/**
+ * ssam_cplt_destroy() - Deinitialize the completion system.
+ * @cplt: The completion system to deinitialize.
+ *
+ * Deinitialize the given completion system and ensure that all pending, i.e.
+ * yet-to-be-completed, event items and requests have been handled.
+ */
+static void ssam_cplt_destroy(struct ssam_cplt *cplt)
+{
+	/*
+	 * Note: destroy_workqueue ensures that all currently queued work will
+	 * be fully completed and the workqueue drained. This means that this
+	 * call will inherently also free any queued ssam_event_items, thus we
+	 * don't have to take care of that here explicitly.
+	 */
+	destroy_workqueue(cplt->wq);
+	ssam_nf_destroy(&cplt->event.notif);
+}
+
+
+/* -- Main SSAM device structures. ------------------------------------------ */
+
+/**
+ * ssam_controller_device() - Get the &struct device associated with this
+ * controller.
+ * @c: The controller for which to get the device.
+ *
+ * Return: Returns the &struct device associated with this controller,
+ * providing its lower-level transport.
+ */
+struct device *ssam_controller_device(struct ssam_controller *c)
+{
+	return ssh_rtl_get_device(&c->rtl);
+}
+EXPORT_SYMBOL_GPL(ssam_controller_device);
+
+static void __ssam_controller_release(struct kref *kref)
+{
+	struct ssam_controller *ctrl = to_ssam_controller(kref, kref);
+
+	/*
+	 * The lock-call here is to satisfy lockdep. At this point we really
+	 * expect this to be the last remaining reference to the controller.
+	 * Anything else is a bug.
+	 */
+	ssam_controller_lock(ctrl);
+	ssam_controller_destroy(ctrl);
+	ssam_controller_unlock(ctrl);
+
+	kfree(ctrl);
+}
+
+/**
+ * ssam_controller_get() - Increment reference count of controller.
+ * @c: The controller.
+ *
+ * Return: Returns the controller provided as input.
+ */
+struct ssam_controller *ssam_controller_get(struct ssam_controller *c)
+{
+	if (c)
+		kref_get(&c->kref);
+	return c;
+}
+EXPORT_SYMBOL_GPL(ssam_controller_get);
+
+/**
+ * ssam_controller_put() - Decrement reference count of controller.
+ * @c: The controller.
+ */
+void ssam_controller_put(struct ssam_controller *c)
+{
+	if (c)
+		kref_put(&c->kref, __ssam_controller_release);
+}
+EXPORT_SYMBOL_GPL(ssam_controller_put);
+
+/**
+ * ssam_controller_statelock() - Lock the controller against state transitions.
+ * @c: The controller to lock.
+ *
+ * Lock the controller against state transitions. Holding this lock guarantees
+ * that the controller will not transition between states, i.e. if the
+ * controller is in state "started", when this lock has been acquired, it will
+ * remain in this state at least until the lock has been released.
+ *
+ * Multiple clients may concurrently hold this lock. In other words: The
+ * ``statelock`` functions represent the read-lock part of a r/w-semaphore.
+ * Actions causing state transitions of the controller must be executed while
+ * holding the write-part of this r/w-semaphore (see ssam_controller_lock()
+ * and ssam_controller_unlock() for that).
+ *
+ * See ssam_controller_stateunlock() for the corresponding unlock function.
+ */
+void ssam_controller_statelock(struct ssam_controller *c)
+{
+	down_read(&c->lock);
+}
+EXPORT_SYMBOL_GPL(ssam_controller_statelock);
+
+/**
+ * ssam_controller_stateunlock() - Unlock controller state transitions.
+ * @c: The controller to unlock.
+ *
+ * See ssam_controller_statelock() for the corresponding lock function.
+ */
+void ssam_controller_stateunlock(struct ssam_controller *c)
+{
+	up_read(&c->lock);
+}
+EXPORT_SYMBOL_GPL(ssam_controller_stateunlock);
+
+/**
+ * ssam_controller_lock() - Acquire the main controller lock.
+ * @c: The controller to lock.
+ *
+ * This lock must be held for any state transitions, including transition to
+ * suspend/resumed states and during shutdown. See ssam_controller_statelock()
+ * for more details on controller locking.
+ *
+ * See ssam_controller_unlock() for the corresponding unlock function.
+ */
+void ssam_controller_lock(struct ssam_controller *c)
+{
+	down_write(&c->lock);
+}
+
+/*
+ * ssam_controller_unlock() - Release the main controller lock.
+ * @c: The controller to unlock.
+ *
+ * See ssam_controller_lock() for the corresponding lock function.
+ */
+void ssam_controller_unlock(struct ssam_controller *c)
+{
+	up_write(&c->lock);
+}
+
+static void ssam_handle_event(struct ssh_rtl *rtl,
+			      const struct ssh_command *cmd,
+			      const struct ssam_span *data)
+{
+	struct ssam_controller *ctrl = to_ssam_controller(rtl, rtl);
+	struct ssam_event_item *item;
+
+	item = ssam_event_item_alloc(data->len, GFP_KERNEL);
+	if (!item)
+		return;
+
+	item->rqid = get_unaligned_le16(&cmd->rqid);
+	item->event.target_category = cmd->tc;
+	item->event.target_id = cmd->tid_in;
+	item->event.command_id = cmd->cid;
+	item->event.instance_id = cmd->iid;
+	memcpy(&item->event.data[0], data->ptr, data->len);
+
+	if (WARN_ON(ssam_cplt_submit_event(&ctrl->cplt, item)))
+		ssam_event_item_free(item);
+}
+
+static const struct ssh_rtl_ops ssam_rtl_ops = {
+	.handle_event = ssam_handle_event,
+};
+
+static bool ssam_notifier_is_empty(struct ssam_controller *ctrl);
+static void ssam_notifier_unregister_all(struct ssam_controller *ctrl);
+
+#define SSAM_SSH_DSM_REVISION	0
+
+/* d5e383e1-d892-4a76-89fc-f6aaae7ed5b5 */
+static const guid_t SSAM_SSH_DSM_GUID =
+	GUID_INIT(0xd5e383e1, 0xd892, 0x4a76,
+		  0x89, 0xfc, 0xf6, 0xaa, 0xae, 0x7e, 0xd5, 0xb5);
+
+enum ssh_dsm_fn {
+	SSH_DSM_FN_SSH_POWER_PROFILE             = 0x05,
+	SSH_DSM_FN_SCREEN_ON_SLEEP_IDLE_TIMEOUT  = 0x06,
+	SSH_DSM_FN_SCREEN_OFF_SLEEP_IDLE_TIMEOUT = 0x07,
+	SSH_DSM_FN_D3_CLOSES_HANDLE              = 0x08,
+	SSH_DSM_FN_SSH_BUFFER_SIZE               = 0x09,
+};
+
+static int ssam_dsm_get_functions(acpi_handle handle, u64 *funcs)
+{
+	union acpi_object *obj;
+	u64 mask = 0;
+	int i;
+
+	*funcs = 0;
+
+	/*
+	 * The _DSM function is only present on newer models. It is not
+	 * present on 5th and 6th generation devices (i.e. up to and including
+	 * Surface Pro 6, Surface Laptop 2, Surface Book 2).
+	 *
+	 * If the _DSM is not present, indicate that no function is supported.
+	 * This will result in default values being set.
+	 */
+	if (!acpi_has_method(handle, "_DSM"))
+		return 0;
+
+	obj = acpi_evaluate_dsm_typed(handle, &SSAM_SSH_DSM_GUID,
+				      SSAM_SSH_DSM_REVISION, 0, NULL,
+				      ACPI_TYPE_BUFFER);
+	if (!obj)
+		return -EIO;
+
+	for (i = 0; i < obj->buffer.length && i < 8; i++)
+		mask |= (((u64)obj->buffer.pointer[i]) << (i * 8));
+
+	if (mask & BIT(0))
+		*funcs = mask;
+
+	ACPI_FREE(obj);
+	return 0;
+}
+
+static int ssam_dsm_load_u32(acpi_handle handle, u64 funcs, u64 func, u32 *ret)
+{
+	union acpi_object *obj;
+	u64 val;
+
+	if (!(funcs & BIT(func)))
+		return 0; /* Not supported, leave *ret at its default value */
+
+	obj = acpi_evaluate_dsm_typed(handle, &SSAM_SSH_DSM_GUID,
+				      SSAM_SSH_DSM_REVISION, func, NULL,
+				      ACPI_TYPE_INTEGER);
+	if (!obj)
+		return -EIO;
+
+	val = obj->integer.value;
+	ACPI_FREE(obj);
+
+	if (val > U32_MAX)
+		return -ERANGE;
+
+	*ret = val;
+	return 0;
+}
+
+/**
+ * ssam_controller_caps_load_from_acpi() - Load controller capabilities from
+ * ACPI _DSM.
+ * @handle: The handle of the ACPI controller/SSH device.
+ * @caps:   Where to store the capabilities in.
+ *
+ * Initializes the given controller capabilities with default values, then
+ * checks and, if the respective _DSM functions are available, loads the
+ * actual capabilities from the _DSM.
+ *
+ * Return: Returns zero on success, a negative error code on failure.
+ */
+static
+int ssam_controller_caps_load_from_acpi(acpi_handle handle,
+					struct ssam_controller_caps *caps)
+{
+	u32 d3_closes_handle = false;
+	u64 funcs;
+	int status;
+
+	/* Set defaults. */
+	caps->ssh_power_profile = U32_MAX;
+	caps->screen_on_sleep_idle_timeout = U32_MAX;
+	caps->screen_off_sleep_idle_timeout = U32_MAX;
+	caps->d3_closes_handle = false;
+	caps->ssh_buffer_size = U32_MAX;
+
+	/* Pre-load supported DSM functions. */
+	status = ssam_dsm_get_functions(handle, &funcs);
+	if (status)
+		return status;
+
+	/* Load actual values from ACPI, if present. */
+	status = ssam_dsm_load_u32(handle, funcs, SSH_DSM_FN_SSH_POWER_PROFILE,
+				   &caps->ssh_power_profile);
+	if (status)
+		return status;
+
+	status = ssam_dsm_load_u32(handle, funcs,
+				   SSH_DSM_FN_SCREEN_ON_SLEEP_IDLE_TIMEOUT,
+				   &caps->screen_on_sleep_idle_timeout);
+	if (status)
+		return status;
+
+	status = ssam_dsm_load_u32(handle, funcs,
+				   SSH_DSM_FN_SCREEN_OFF_SLEEP_IDLE_TIMEOUT,
+				   &caps->screen_off_sleep_idle_timeout);
+	if (status)
+		return status;
+
+	status = ssam_dsm_load_u32(handle, funcs, SSH_DSM_FN_D3_CLOSES_HANDLE,
+				   &d3_closes_handle);
+	if (status)
+		return status;
+
+	caps->d3_closes_handle = !!d3_closes_handle;
+
+	status = ssam_dsm_load_u32(handle, funcs, SSH_DSM_FN_SSH_BUFFER_SIZE,
+				   &caps->ssh_buffer_size);
+	if (status)
+		return status;
+
+	return 0;
+}
+
+/**
+ * ssam_controller_init() - Initialize SSAM controller.
+ * @ctrl:   The controller to initialize.
+ * @serdev: The serial device representing the underlying data transport.
+ *
+ * Initializes the given controller. Does neither start receiver nor
+ * transmitter threads. After this call, the controller has to be hooked up to
+ * the serdev core separately via &struct serdev_device_ops, relaying calls to
+ * ssam_controller_receive_buf() and ssam_controller_write_wakeup(). Once the
+ * controller has been hooked up, transmitter and receiver threads may be
+ * started via ssam_controller_start(). These setup steps need to be completed
+ * before controller can be used for requests.
+ */
+int ssam_controller_init(struct ssam_controller *ctrl,
+			 struct serdev_device *serdev)
+{
+	acpi_handle handle = ACPI_HANDLE(&serdev->dev);
+	int status;
+
+	init_rwsem(&ctrl->lock);
+	kref_init(&ctrl->kref);
+
+	status = ssam_controller_caps_load_from_acpi(handle, &ctrl->caps);
+	if (status)
+		return status;
+
+	dev_dbg(&serdev->dev,
+		"device capabilities:\n"
+		"  ssh_power_profile:             %u\n"
+		"  ssh_buffer_size:               %u\n"
+		"  screen_on_sleep_idle_timeout:  %u\n"
+		"  screen_off_sleep_idle_timeout: %u\n"
+		"  d3_closes_handle:              %u\n",
+		ctrl->caps.ssh_power_profile,
+		ctrl->caps.ssh_buffer_size,
+		ctrl->caps.screen_on_sleep_idle_timeout,
+		ctrl->caps.screen_off_sleep_idle_timeout,
+		ctrl->caps.d3_closes_handle);
+
+	ssh_seq_reset(&ctrl->counter.seq);
+	ssh_rqid_reset(&ctrl->counter.rqid);
+
+	/* Initialize event/request completion system. */
+	status = ssam_cplt_init(&ctrl->cplt, &serdev->dev);
+	if (status)
+		return status;
+
+	/* Initialize request and packet transport layers. */
+	status = ssh_rtl_init(&ctrl->rtl, serdev, &ssam_rtl_ops);
+	if (status) {
+		ssam_cplt_destroy(&ctrl->cplt);
+		return status;
+	}
+
+	/*
+	 * Set state via write_once even though we expect to be in an
+	 * exclusive context, due to smoke-testing in
+	 * ssam_request_sync_submit().
+	 */
+	WRITE_ONCE(ctrl->state, SSAM_CONTROLLER_INITIALIZED);
+	return 0;
+}
+
+/**
+ * ssam_controller_start() - Start the receiver and transmitter threads of the
+ * controller.
+ * @ctrl: The controller.
+ *
+ * Note: When this function is called, the controller should be properly
+ * hooked up to the serdev core via &struct serdev_device_ops. Please refer
+ * to ssam_controller_init() for more details on controller initialization.
+ *
+ * This function must be called with the main controller lock held (i.e. by
+ * calling ssam_controller_lock()).
+ */
+int ssam_controller_start(struct ssam_controller *ctrl)
+{
+	int status;
+
+	lockdep_assert_held_write(&ctrl->lock);
+
+	if (ctrl->state != SSAM_CONTROLLER_INITIALIZED)
+		return -EINVAL;
+
+	status = ssh_rtl_start(&ctrl->rtl);
+	if (status)
+		return status;
+
+	/*
+	 * Set state via write_once even though we expect to be locked/in an
+	 * exclusive context, due to smoke-testing in
+	 * ssam_request_sync_submit().
+	 */
+	WRITE_ONCE(ctrl->state, SSAM_CONTROLLER_STARTED);
+	return 0;
+}
+
+/*
+ * SSAM_CTRL_SHUTDOWN_FLUSH_TIMEOUT - Timeout for flushing requests during
+ * shutdown.
+ *
+ * Chosen to be larger than one full request timeout, including packets timing
+ * out. This value should give ample time to complete any outstanding requests
+ * during normal operation and account for the odd package timeout.
+ */
+#define SSAM_CTRL_SHUTDOWN_FLUSH_TIMEOUT	msecs_to_jiffies(5000)
+
+/**
+ * ssam_controller_shutdown() - Shut down the controller.
+ * @ctrl: The controller.
+ *
+ * Shuts down the controller by flushing all pending requests and stopping the
+ * transmitter and receiver threads. All requests submitted after this call
+ * will fail with %-ESHUTDOWN. While it is discouraged to do so, this function
+ * is safe to use in parallel with ongoing request submission.
+ *
+ * In the course of this shutdown procedure, all currently registered
+ * notifiers will be unregistered. It is, however, strongly recommended to not
+ * rely on this behavior, and instead the party registering the notifier
+ * should unregister it before the controller gets shut down, e.g. via the
+ * SSAM bus which guarantees client devices to be removed before a shutdown.
+ *
+ * Note that events may still be pending after this call, but, due to the
+ * notifiers being unregistered, these events will be dropped when the
+ * controller is subsequently destroyed via ssam_controller_destroy().
+ *
+ * This function must be called with the main controller lock held (i.e. by
+ * calling ssam_controller_lock()).
+ */
+void ssam_controller_shutdown(struct ssam_controller *ctrl)
+{
+	enum ssam_controller_state s = ctrl->state;
+	int status;
+
+	lockdep_assert_held_write(&ctrl->lock);
+
+	if (s == SSAM_CONTROLLER_UNINITIALIZED || s == SSAM_CONTROLLER_STOPPED)
+		return;
+
+	/*
+	 * Try to flush pending events and requests while everything still
+	 * works. Note: There may still be packets and/or requests in the
+	 * system after this call (e.g. via control packets submitted by the
+	 * packet transport layer or flush timeout / failure, ...). Those will
+	 * be handled with the ssh_rtl_shutdown() call below.
+	 */
+	status = ssh_rtl_flush(&ctrl->rtl, SSAM_CTRL_SHUTDOWN_FLUSH_TIMEOUT);
+	if (status) {
+		ssam_err(ctrl, "failed to flush request transport layer: %d\n",
+			 status);
+	}
+
+	/* Try to flush all currently completing requests and events. */
+	ssam_cplt_flush(&ctrl->cplt);
+
+	/*
+	 * We expect all notifiers to have been removed by the respective client
+	 * driver that set them up at this point. If this warning occurs, some
+	 * client driver has not done that...
+	 */
+	WARN_ON(!ssam_notifier_is_empty(ctrl));
+
+	/*
+	 * Nevertheless, we should still take care of drivers that don't behave
+	 * well. Thus disable all enabled events, unregister all notifiers.
+	 */
+	ssam_notifier_unregister_all(ctrl);
+
+	/*
+	 * Cancel remaining requests. Ensure no new ones can be queued and stop
+	 * threads.
+	 */
+	ssh_rtl_shutdown(&ctrl->rtl);
+
+	/*
+	 * Set state via write_once even though we expect to be locked/in an
+	 * exclusive context, due to smoke-testing in
+	 * ssam_request_sync_submit().
+	 */
+	WRITE_ONCE(ctrl->state, SSAM_CONTROLLER_STOPPED);
+	ctrl->rtl.ptl.serdev = NULL;
+}
+
+/**
+ * ssam_controller_destroy() - Destroy the controller and free its resources.
+ * @ctrl: The controller.
+ *
+ * Ensures that all resources associated with the controller get freed. This
+ * function should only be called after the controller has been stopped via
+ * ssam_controller_shutdown(). In general, this function should not be called
+ * directly. The only valid place to call this function directly is during
+ * initialization, before the controller has been fully initialized and passed
+ * to other processes. This function is called automatically when the
+ * reference count of the controller reaches zero.
+ *
+ * This function must be called with the main controller lock held (i.e. by
+ * calling ssam_controller_lock()).
+ */
+void ssam_controller_destroy(struct ssam_controller *ctrl)
+{
+	lockdep_assert_held_write(&ctrl->lock);
+
+	if (ctrl->state == SSAM_CONTROLLER_UNINITIALIZED)
+		return;
+
+	WARN_ON(ctrl->state != SSAM_CONTROLLER_STOPPED);
+
+	/*
+	 * Note: New events could still have been received after the previous
+	 * flush in ssam_controller_shutdown, before the request transport layer
+	 * has been shut down. At this point, after the shutdown, we can be sure
+	 * that no new events will be queued. The call to ssam_cplt_destroy will
+	 * ensure that those remaining are being completed and freed.
+	 */
+
+	/* Actually free resources. */
+	ssam_cplt_destroy(&ctrl->cplt);
+	ssh_rtl_destroy(&ctrl->rtl);
+
+	/*
+	 * Set state via write_once even though we expect to be locked/in an
+	 * exclusive context, due to smoke-testing in
+	 * ssam_request_sync_submit().
+	 */
+	WRITE_ONCE(ctrl->state, SSAM_CONTROLLER_UNINITIALIZED);
+}
+
+/**
+ * ssam_controller_suspend() - Suspend the controller.
+ * @ctrl: The controller to suspend.
+ *
+ * Marks the controller as suspended. Note that display-off and D0-exit
+ * notifications have to be sent manually before transitioning the controller
+ * into the suspended state via this function.
+ *
+ * See ssam_controller_resume() for the corresponding resume function.
+ *
+ * Return: Returns %-EINVAL if the controller is currently not in the
+ * "started" state.
+ */
+int ssam_controller_suspend(struct ssam_controller *ctrl)
+{
+	ssam_controller_lock(ctrl);
+
+	if (ctrl->state != SSAM_CONTROLLER_STARTED) {
+		ssam_controller_unlock(ctrl);
+		return -EINVAL;
+	}
+
+	ssam_dbg(ctrl, "pm: suspending controller\n");
+
+	/*
+	 * Set state via write_once even though we're locked, due to
+	 * smoke-testing in ssam_request_sync_submit().
+	 */
+	WRITE_ONCE(ctrl->state, SSAM_CONTROLLER_SUSPENDED);
+
+	ssam_controller_unlock(ctrl);
+	return 0;
+}
+
+/**
+ * ssam_controller_resume() - Resume the controller from suspend.
+ * @ctrl: The controller to resume.
+ *
+ * Resume the controller from the suspended state it was put into via
+ * ssam_controller_suspend(). This function does not issue display-on and
+ * D0-entry notifications. If required, those have to be sent manually after
+ * this call.
+ *
+ * Return: Returns %-EINVAL if the controller is currently not suspended.
+ */
+int ssam_controller_resume(struct ssam_controller *ctrl)
+{
+	ssam_controller_lock(ctrl);
+
+	if (ctrl->state != SSAM_CONTROLLER_SUSPENDED) {
+		ssam_controller_unlock(ctrl);
+		return -EINVAL;
+	}
+
+	ssam_dbg(ctrl, "pm: resuming controller\n");
+
+	/*
+	 * Set state via write_once even though we're locked, due to
+	 * smoke-testing in ssam_request_sync_submit().
+	 */
+	WRITE_ONCE(ctrl->state, SSAM_CONTROLLER_STARTED);
+
+	ssam_controller_unlock(ctrl);
+	return 0;
+}
+
+
+/* -- Top-level request interface ------------------------------------------- */
+
+/**
+ * ssam_request_write_data() - Construct and write SAM request message to
+ * buffer.
+ * @buf:  The buffer to write the data to.
+ * @ctrl: The controller via which the request will be sent.
+ * @spec: The request data and specification.
+ *
+ * Constructs a SAM/SSH request message and writes it to the provided buffer.
+ * The request and transport counters, specifically RQID and SEQ, will be set
+ * in this call. These counters are obtained from the controller. It is thus
+ * only valid to send the resulting message via the controller specified here.
+ *
+ * For calculation of the required buffer size, refer to the
+ * SSH_COMMAND_MESSAGE_LENGTH() macro.
+ *
+ * Return: Returns the number of bytes used in the buffer on success. Returns
+ * %-EINVAL if the payload length provided in the request specification is too
+ * large (larger than %SSH_COMMAND_MAX_PAYLOAD_SIZE) or if the provided buffer
+ * is too small.
+ */
+ssize_t ssam_request_write_data(struct ssam_span *buf,
+				struct ssam_controller *ctrl,
+				const struct ssam_request *spec)
+{
+	struct msgbuf msgb;
+	u16 rqid;
+	u8 seq;
+
+	if (spec->length > SSH_COMMAND_MAX_PAYLOAD_SIZE)
+		return -EINVAL;
+
+	if (SSH_COMMAND_MESSAGE_LENGTH(spec->length) > buf->len)
+		return -EINVAL;
+
+	msgb_init(&msgb, buf->ptr, buf->len);
+	seq = ssh_seq_next(&ctrl->counter.seq);
+	rqid = ssh_rqid_next(&ctrl->counter.rqid);
+	msgb_push_cmd(&msgb, seq, rqid, spec);
+
+	return msgb_bytes_used(&msgb);
+}
+EXPORT_SYMBOL_GPL(ssam_request_write_data);
+
+static void ssam_request_sync_complete(struct ssh_request *rqst,
+				       const struct ssh_command *cmd,
+				       const struct ssam_span *data, int status)
+{
+	struct ssh_rtl *rtl = ssh_request_rtl(rqst);
+	struct ssam_request_sync *r;
+
+	r = container_of(rqst, struct ssam_request_sync, base);
+	r->status = status;
+
+	if (r->resp)
+		r->resp->length = 0;
+
+	if (status) {
+		rtl_dbg_cond(rtl, "rsp: request failed: %d\n", status);
+		return;
+	}
+
+	if (!data)	/* Handle requests without a response. */
+		return;
+
+	if (!r->resp || !r->resp->pointer) {
+		if (data->len)
+			rtl_warn(rtl, "rsp: no response buffer provided, dropping data\n");
+		return;
+	}
+
+	if (data->len > r->resp->capacity) {
+		rtl_err(rtl,
+			"rsp: response buffer too small, capacity: %zu bytes, got: %zu bytes\n",
+			r->resp->capacity, data->len);
+		r->status = -ENOSPC;
+		return;
+	}
+
+	r->resp->length = data->len;
+	memcpy(r->resp->pointer, data->ptr, data->len);
+}
+
+static void ssam_request_sync_release(struct ssh_request *rqst)
+{
+	complete_all(&container_of(rqst, struct ssam_request_sync, base)->comp);
+}
+
+static const struct ssh_request_ops ssam_request_sync_ops = {
+	.release = ssam_request_sync_release,
+	.complete = ssam_request_sync_complete,
+};
+
+/**
+ * ssam_request_sync_alloc() - Allocate a synchronous request.
+ * @payload_len: The length of the request payload.
+ * @flags:       Flags used for allocation.
+ * @rqst:        Where to store the pointer to the allocated request.
+ * @buffer:      Where to store the buffer descriptor for the message buffer of
+ *               the request.
+ *
+ * Allocates a synchronous request with corresponding message buffer. The
+ * request still needs to be initialized ssam_request_sync_init() before
+ * it can be submitted, and the message buffer data must still be set to the
+ * returned buffer via ssam_request_sync_set_data() after it has been filled,
+ * if need be with adjusted message length.
+ *
+ * After use, the request and its corresponding message buffer should be freed
+ * via ssam_request_sync_free(). The buffer must not be freed separately.
+ *
+ * Return: Returns zero on success, %-ENOMEM if the request could not be
+ * allocated.
+ */
+int ssam_request_sync_alloc(size_t payload_len, gfp_t flags,
+			    struct ssam_request_sync **rqst,
+			    struct ssam_span *buffer)
+{
+	size_t msglen = SSH_COMMAND_MESSAGE_LENGTH(payload_len);
+
+	*rqst = kzalloc(sizeof(**rqst) + msglen, flags);
+	if (!*rqst)
+		return -ENOMEM;
+
+	buffer->ptr = (u8 *)(*rqst + 1);
+	buffer->len = msglen;
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(ssam_request_sync_alloc);
+
+/**
+ * ssam_request_sync_free() - Free a synchronous request.
+ * @rqst: The request to be freed.
+ *
+ * Free a synchronous request and its corresponding buffer allocated with
+ * ssam_request_sync_alloc(). Do not use for requests allocated on the stack
+ * or via any other function.
+ *
+ * Warning: The caller must ensure that the request is not in use any more.
+ * I.e. the caller must ensure that it has the only reference to the request
+ * and the request is not currently pending. This means that the caller has
+ * either never submitted the request, request submission has failed, or the
+ * caller has waited until the submitted request has been completed via
+ * ssam_request_sync_wait().
+ */
+void ssam_request_sync_free(struct ssam_request_sync *rqst)
+{
+	kfree(rqst);
+}
+EXPORT_SYMBOL_GPL(ssam_request_sync_free);
+
+/**
+ * ssam_request_sync_init() - Initialize a synchronous request struct.
+ * @rqst:  The request to initialize.
+ * @flags: The request flags.
+ *
+ * Initializes the given request struct. Does not initialize the request
+ * message data. This has to be done explicitly after this call via
+ * ssam_request_sync_set_data() and the actual message data has to be written
+ * via ssam_request_write_data().
+ *
+ * Return: Returns zero on success or %-EINVAL if the given flags are invalid.
+ */
+int ssam_request_sync_init(struct ssam_request_sync *rqst,
+			   enum ssam_request_flags flags)
+{
+	int status;
+
+	status = ssh_request_init(&rqst->base, flags, &ssam_request_sync_ops);
+	if (status)
+		return status;
+
+	init_completion(&rqst->comp);
+	rqst->resp = NULL;
+	rqst->status = 0;
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(ssam_request_sync_init);
+
+/**
+ * ssam_request_sync_submit() - Submit a synchronous request.
+ * @ctrl: The controller with which to submit the request.
+ * @rqst: The request to submit.
+ *
+ * Submit a synchronous request. The request has to be initialized and
+ * properly set up, including response buffer (may be %NULL if no response is
+ * expected) and command message data. This function does not wait for the
+ * request to be completed.
+ *
+ * If this function succeeds, ssam_request_sync_wait() must be used to ensure
+ * that the request has been completed before the response data can be
+ * accessed and/or the request can be freed. On failure, the request may
+ * immediately be freed.
+ *
+ * This function may only be used if the controller is active, i.e. has been
+ * initialized and not suspended.
+ */
+int ssam_request_sync_submit(struct ssam_controller *ctrl,
+			     struct ssam_request_sync *rqst)
+{
+	int status;
+
+	/*
+	 * This is only a superficial check. In general, the caller needs to
+	 * ensure that the controller is initialized and is not (and does not
+	 * get) suspended during use, i.e. until the request has been completed
+	 * (if _absolutely_ necessary, by use of ssam_controller_statelock/
+	 * ssam_controller_stateunlock, but something like ssam_client_link
+	 * should be preferred as this needs to last until the request has been
+	 * completed).
+	 *
+	 * Note that it is actually safe to use this function while the
+	 * controller is in the process of being shut down (as ssh_rtl_submit
+	 * is safe with regards to this), but it is generally discouraged to do
+	 * so.
+	 */
+	if (WARN_ON(READ_ONCE(ctrl->state) != SSAM_CONTROLLER_STARTED)) {
+		ssh_request_put(&rqst->base);
+		return -ENODEV;
+	}
+
+	status = ssh_rtl_submit(&ctrl->rtl, &rqst->base);
+	ssh_request_put(&rqst->base);
+
+	return status;
+}
+EXPORT_SYMBOL_GPL(ssam_request_sync_submit);
+
+/**
+ * ssam_request_sync() - Execute a synchronous request.
+ * @ctrl: The controller via which the request will be submitted.
+ * @spec: The request specification and payload.
+ * @rsp:  The response buffer.
+ *
+ * Allocates a synchronous request with its message data buffer on the heap
+ * via ssam_request_sync_alloc(), fully initializes it via the provided
+ * request specification, submits it, and finally waits for its completion
+ * before freeing it and returning its status.
+ *
+ * Return: Returns the status of the request or any failure during setup.
+ */
+int ssam_request_sync(struct ssam_controller *ctrl,
+		      const struct ssam_request *spec,
+		      struct ssam_response *rsp)
+{
+	struct ssam_request_sync *rqst;
+	struct ssam_span buf;
+	ssize_t len;
+	int status;
+
+	status = ssam_request_sync_alloc(spec->length, GFP_KERNEL, &rqst, &buf);
+	if (status)
+		return status;
+
+	status = ssam_request_sync_init(rqst, spec->flags);
+	if (status)
+		return status;
+
+	ssam_request_sync_set_resp(rqst, rsp);
+
+	len = ssam_request_write_data(&buf, ctrl, spec);
+	if (len < 0) {
+		ssam_request_sync_free(rqst);
+		return len;
+	}
+
+	ssam_request_sync_set_data(rqst, buf.ptr, len);
+
+	status = ssam_request_sync_submit(ctrl, rqst);
+	if (!status)
+		status = ssam_request_sync_wait(rqst);
+
+	ssam_request_sync_free(rqst);
+	return status;
+}
+EXPORT_SYMBOL_GPL(ssam_request_sync);
+
+/**
+ * ssam_request_sync_with_buffer() - Execute a synchronous request with the
+ * provided buffer as back-end for the message buffer.
+ * @ctrl: The controller via which the request will be submitted.
+ * @spec: The request specification and payload.
+ * @rsp:  The response buffer.
+ * @buf:  The buffer for the request message data.
+ *
+ * Allocates a synchronous request struct on the stack, fully initializes it
+ * using the provided buffer as message data buffer, submits it, and then
+ * waits for its completion before returning its status. The
+ * SSH_COMMAND_MESSAGE_LENGTH() macro can be used to compute the required
+ * message buffer size.
+ *
+ * This function does essentially the same as ssam_request_sync(), but instead
+ * of dynamically allocating the request and message data buffer, it uses the
+ * provided message data buffer and stores the (small) request struct on the
+ * heap.
+ *
+ * Return: Returns the status of the request or any failure during setup.
+ */
+int ssam_request_sync_with_buffer(struct ssam_controller *ctrl,
+				  const struct ssam_request *spec,
+				  struct ssam_response *rsp,
+				  struct ssam_span *buf)
+{
+	struct ssam_request_sync rqst;
+	ssize_t len;
+	int status;
+
+	status = ssam_request_sync_init(&rqst, spec->flags);
+	if (status)
+		return status;
+
+	ssam_request_sync_set_resp(&rqst, rsp);
+
+	len = ssam_request_write_data(buf, ctrl, spec);
+	if (len < 0)
+		return len;
+
+	ssam_request_sync_set_data(&rqst, buf->ptr, len);
+
+	status = ssam_request_sync_submit(ctrl, &rqst);
+	if (!status)
+		status = ssam_request_sync_wait(&rqst);
+
+	return status;
+}
+EXPORT_SYMBOL_GPL(ssam_request_sync_with_buffer);
+
+
+/* -- Internal SAM requests. ------------------------------------------------ */
+
+static SSAM_DEFINE_SYNC_REQUEST_R(ssam_ssh_get_firmware_version, __le32, {
+	.target_category = SSAM_SSH_TC_SAM,
+	.target_id       = 0x01,
+	.command_id      = 0x13,
+	.instance_id     = 0x00,
+});
+
+static SSAM_DEFINE_SYNC_REQUEST_R(ssam_ssh_notif_display_off, u8, {
+	.target_category = SSAM_SSH_TC_SAM,
+	.target_id       = 0x01,
+	.command_id      = 0x15,
+	.instance_id     = 0x00,
+});
+
+static SSAM_DEFINE_SYNC_REQUEST_R(ssam_ssh_notif_display_on, u8, {
+	.target_category = SSAM_SSH_TC_SAM,
+	.target_id       = 0x01,
+	.command_id      = 0x16,
+	.instance_id     = 0x00,
+});
+
+static SSAM_DEFINE_SYNC_REQUEST_R(ssam_ssh_notif_d0_exit, u8, {
+	.target_category = SSAM_SSH_TC_SAM,
+	.target_id       = 0x01,
+	.command_id      = 0x33,
+	.instance_id     = 0x00,
+});
+
+static SSAM_DEFINE_SYNC_REQUEST_R(ssam_ssh_notif_d0_entry, u8, {
+	.target_category = SSAM_SSH_TC_SAM,
+	.target_id       = 0x01,
+	.command_id      = 0x34,
+	.instance_id     = 0x00,
+});
+
+/**
+ * struct ssh_notification_params - Command payload to enable/disable SSH
+ * notifications.
+ * @target_category: The target category for which notifications should be
+ *                   enabled/disabled.
+ * @flags:           Flags determining how notifications are being sent.
+ * @request_id:      The request ID that is used to send these notifications.
+ * @instance_id:     The specific instance in the given target category for
+ *                   which notifications should be enabled.
+ */
+struct ssh_notification_params {
+	u8 target_category;
+	u8 flags;
+	__le16 request_id;
+	u8 instance_id;
+} __packed;
+
+static_assert(sizeof(struct ssh_notification_params) == 5);
+
+static int __ssam_ssh_event_request(struct ssam_controller *ctrl,
+				    struct ssam_event_registry reg, u8 cid,
+				    struct ssam_event_id id, u8 flags)
+{
+	struct ssh_notification_params params;
+	struct ssam_request rqst;
+	struct ssam_response result;
+	int status;
+
+	u16 rqid = ssh_tc_to_rqid(id.target_category);
+	u8 buf = 0;
+
+	/* Only allow RQIDs that lie within the event spectrum. */
+	if (!ssh_rqid_is_event(rqid))
+		return -EINVAL;
+
+	params.target_category = id.target_category;
+	params.instance_id = id.instance;
+	params.flags = flags;
+	put_unaligned_le16(rqid, &params.request_id);
+
+	rqst.target_category = reg.target_category;
+	rqst.target_id = reg.target_id;
+	rqst.command_id = cid;
+	rqst.instance_id = 0x00;
+	rqst.flags = SSAM_REQUEST_HAS_RESPONSE;
+	rqst.length = sizeof(params);
+	rqst.payload = (u8 *)&params;
+
+	result.capacity = sizeof(buf);
+	result.length = 0;
+	result.pointer = &buf;
+
+	status = ssam_retry(ssam_request_sync_onstack, ctrl, &rqst, &result,
+			    sizeof(params));
+
+	return status < 0 ? status : buf;
+}
+
+/**
+ * ssam_ssh_event_enable() - Enable SSH event.
+ * @ctrl:  The controller for which to enable the event.
+ * @reg:   The event registry describing what request to use for enabling and
+ *         disabling the event.
+ * @id:    The event identifier.
+ * @flags: The event flags.
+ *
+ * Enables the specified event on the EC. This function does not manage
+ * reference counting of enabled events and is basically only a wrapper for
+ * the raw EC request. If the specified event is already enabled, the EC will
+ * ignore this request.
+ *
+ * Return: Returns the status of the executed SAM request (zero on success and
+ * negative on direct failure) or %-EPROTO if the request response indicates a
+ * failure.
+ */
+static int ssam_ssh_event_enable(struct ssam_controller *ctrl,
+				 struct ssam_event_registry reg,
+				 struct ssam_event_id id, u8 flags)
+{
+	int status;
+
+	status = __ssam_ssh_event_request(ctrl, reg, reg.cid_enable, id, flags);
+
+	if (status < 0 && status != -EINVAL) {
+		ssam_err(ctrl,
+			 "failed to enable event source (tc: %#04x, iid: %#04x, reg: %#04x)\n",
+			 id.target_category, id.instance, reg.target_category);
+	}
+
+	if (status > 0) {
+		ssam_err(ctrl,
+			 "unexpected result while enabling event source: %#04x (tc: %#04x, iid: %#04x, reg: %#04x)\n",
+			 status, id.target_category, id.instance, reg.target_category);
+		return -EPROTO;
+	}
+
+	return status;
+}
+
+/**
+ * ssam_ssh_event_disable() - Disable SSH event.
+ * @ctrl:  The controller for which to disable the event.
+ * @reg:   The event registry describing what request to use for enabling and
+ *         disabling the event (must be same as used when enabling the event).
+ * @id:    The event identifier.
+ * @flags: The event flags (likely ignored for disabling of events).
+ *
+ * Disables the specified event on the EC. This function does not manage
+ * reference counting of enabled events and is basically only a wrapper for
+ * the raw EC request. If the specified event is already disabled, the EC will
+ * ignore this request.
+ *
+ * Return: Returns the status of the executed SAM request (zero on success and
+ * negative on direct failure) or %-EPROTO if the request response indicates a
+ * failure.
+ */
+static int ssam_ssh_event_disable(struct ssam_controller *ctrl,
+				  struct ssam_event_registry reg,
+				  struct ssam_event_id id, u8 flags)
+{
+	int status;
+
+	status = __ssam_ssh_event_request(ctrl, reg, reg.cid_enable, id, flags);
+
+	if (status < 0 && status != -EINVAL) {
+		ssam_err(ctrl,
+			 "failed to disable event source (tc: %#04x, iid: %#04x, reg: %#04x)\n",
+			 id.target_category, id.instance, reg.target_category);
+	}
+
+	if (status > 0) {
+		ssam_err(ctrl,
+			 "unexpected result while disabling event source: %#04x (tc: %#04x, iid: %#04x, reg: %#04x)\n",
+			 status, id.target_category, id.instance, reg.target_category);
+		return -EPROTO;
+	}
+
+	return status;
+}
+
+
+/* -- Wrappers for internal SAM requests. ----------------------------------- */
+
+/**
+ * ssam_get_firmware_version() - Get the SAM/EC firmware version.
+ * @ctrl:    The controller.
+ * @version: Where to store the version number.
+ *
+ * Return: Returns zero on success or the status of the executed SAM request
+ * if that request failed.
+ */
+int ssam_get_firmware_version(struct ssam_controller *ctrl, u32 *version)
+{
+	__le32 __version;
+	int status;
+
+	status = ssam_retry(ssam_ssh_get_firmware_version, ctrl, &__version);
+	if (status)
+		return status;
+
+	*version = le32_to_cpu(__version);
+	return 0;
+}
+
+/**
+ * ssam_ctrl_notif_display_off() - Notify EC that the display has been turned
+ * off.
+ * @ctrl: The controller.
+ *
+ * Notify the EC that the display has been turned off and the driver may enter
+ * a lower-power state. This will prevent events from being sent directly.
+ * Rather, the EC signals an event by pulling the wakeup GPIO high for as long
+ * as there are pending events. The events then need to be manually released,
+ * one by one, via the GPIO callback request. All pending events accumulated
+ * during this state can also be released by issuing the display-on
+ * notification, e.g. via ssam_ctrl_notif_display_on(), which will also reset
+ * the GPIO.
+ *
+ * On some devices, specifically ones with an integrated keyboard, the keyboard
+ * backlight will be turned off by this call.
+ *
+ * This function will only send the display-off notification command if
+ * display notifications are supported by the EC. Currently all known devices
+ * support these notifications.
+ *
+ * Use ssam_ctrl_notif_display_on() to reverse the effects of this function.
+ *
+ * Return: Returns zero on success or if no request has been executed, the
+ * status of the executed SAM request if that request failed, or %-EPROTO if
+ * an unexpected response has been received.
+ */
+int ssam_ctrl_notif_display_off(struct ssam_controller *ctrl)
+{
+	int status;
+	u8 response;
+
+	ssam_dbg(ctrl, "pm: notifying display off\n");
+
+	status = ssam_retry(ssam_ssh_notif_display_off, ctrl, &response);
+	if (status)
+		return status;
+
+	if (response != 0) {
+		ssam_err(ctrl, "unexpected response from display-off notification: %#04x\n",
+			 response);
+		return -EPROTO;
+	}
+
+	return 0;
+}
+
+/**
+ * ssam_ctrl_notif_display_on() - Notify EC that the display has been turned on.
+ * @ctrl: The controller.
+ *
+ * Notify the EC that the display has been turned back on and the driver has
+ * exited its lower-power state. This notification is the counterpart to the
+ * display-off notification sent via ssam_ctrl_notif_display_off() and will
+ * reverse its effects, including resetting events to their default behavior.
+ *
+ * This function will only send the display-on notification command if display
+ * notifications are supported by the EC. Currently all known devices support
+ * these notifications.
+ *
+ * See ssam_ctrl_notif_display_off() for more details.
+ *
+ * Return: Returns zero on success or if no request has been executed, the
+ * status of the executed SAM request if that request failed, or %-EPROTO if
+ * an unexpected response has been received.
+ */
+int ssam_ctrl_notif_display_on(struct ssam_controller *ctrl)
+{
+	int status;
+	u8 response;
+
+	ssam_dbg(ctrl, "pm: notifying display on\n");
+
+	status = ssam_retry(ssam_ssh_notif_display_on, ctrl, &response);
+	if (status)
+		return status;
+
+	if (response != 0) {
+		ssam_err(ctrl, "unexpected response from display-on notification: %#04x\n",
+			 response);
+		return -EPROTO;
+	}
+
+	return 0;
+}
+
+/**
+ * ssam_ctrl_notif_d0_exit() - Notify EC that the driver/device exits the D0
+ * power state.
+ * @ctrl: The controller
+ *
+ * Notifies the EC that the driver prepares to exit the D0 power state in
+ * favor of a lower-power state. Exact effects of this function related to the
+ * EC are currently unknown.
+ *
+ * This function will only send the D0-exit notification command if D0-state
+ * notifications are supported by the EC. Only newer Surface generations
+ * support these notifications.
+ *
+ * Use ssam_ctrl_notif_d0_entry() to reverse the effects of this function.
+ *
+ * Return: Returns zero on success or if no request has been executed, the
+ * status of the executed SAM request if that request failed, or %-EPROTO if
+ * an unexpected response has been received.
+ */
+int ssam_ctrl_notif_d0_exit(struct ssam_controller *ctrl)
+{
+	int status;
+	u8 response;
+
+	if (!ctrl->caps.d3_closes_handle)
+		return 0;
+
+	ssam_dbg(ctrl, "pm: notifying D0 exit\n");
+
+	status = ssam_retry(ssam_ssh_notif_d0_exit, ctrl, &response);
+	if (status)
+		return status;
+
+	if (response != 0) {
+		ssam_err(ctrl, "unexpected response from D0-exit notification: %#04x\n",
+			 response);
+		return -EPROTO;
+	}
+
+	return 0;
+}
+
+/**
+ * ssam_ctrl_notif_d0_entry() - Notify EC that the driver/device enters the D0
+ * power state.
+ * @ctrl: The controller
+ *
+ * Notifies the EC that the driver has exited a lower-power state and entered
+ * the D0 power state. Exact effects of this function related to the EC are
+ * currently unknown.
+ *
+ * This function will only send the D0-entry notification command if D0-state
+ * notifications are supported by the EC. Only newer Surface generations
+ * support these notifications.
+ *
+ * See ssam_ctrl_notif_d0_exit() for more details.
+ *
+ * Return: Returns zero on success or if no request has been executed, the
+ * status of the executed SAM request if that request failed, or %-EPROTO if
+ * an unexpected response has been received.
+ */
+int ssam_ctrl_notif_d0_entry(struct ssam_controller *ctrl)
+{
+	int status;
+	u8 response;
+
+	if (!ctrl->caps.d3_closes_handle)
+		return 0;
+
+	ssam_dbg(ctrl, "pm: notifying D0 entry\n");
+
+	status = ssam_retry(ssam_ssh_notif_d0_entry, ctrl, &response);
+	if (status)
+		return status;
+
+	if (response != 0) {
+		ssam_err(ctrl, "unexpected response from D0-entry notification: %#04x\n",
+			 response);
+		return -EPROTO;
+	}
+
+	return 0;
+}
+
+
+/* -- Top-level event registry interface. ----------------------------------- */
+
+/**
+ * ssam_notifier_register() - Register an event notifier.
+ * @ctrl: The controller to register the notifier on.
+ * @n:    The event notifier to register.
+ *
+ * Register an event notifier and increment the usage counter of the
+ * associated SAM event. If the event was previously not enabled, it will be
+ * enabled during this call.
+ *
+ * Return: Returns zero on success, %-ENOSPC if there have already been
+ * %INT_MAX notifiers for the event ID/type associated with the notifier block
+ * registered, %-ENOMEM if the corresponding event entry could not be
+ * allocated. If this is the first time that a notifier block is registered
+ * for the specific associated event, returns the status of the event-enable
+ * EC-command.
+ */
+int ssam_notifier_register(struct ssam_controller *ctrl,
+			   struct ssam_event_notifier *n)
+{
+	u16 rqid = ssh_tc_to_rqid(n->event.id.target_category);
+	struct ssam_nf_refcount_entry *entry;
+	struct ssam_nf_head *nf_head;
+	struct ssam_nf *nf;
+	int status;
+
+	if (!ssh_rqid_is_event(rqid))
+		return -EINVAL;
+
+	nf = &ctrl->cplt.event.notif;
+	nf_head = &nf->head[ssh_rqid_to_event(rqid)];
+
+	mutex_lock(&nf->lock);
+
+	entry = ssam_nf_refcount_inc(nf, n->event.reg, n->event.id);
+	if (IS_ERR(entry)) {
+		mutex_unlock(&nf->lock);
+		return PTR_ERR(entry);
+	}
+
+	ssam_dbg(ctrl, "enabling event (reg: %#04x, tc: %#04x, iid: %#04x, rc: %d)\n",
+		 n->event.reg.target_category, n->event.id.target_category,
+		 n->event.id.instance, entry->refcount);
+
+	status = ssam_nfblk_insert(nf_head, &n->base);
+	if (status) {
+		entry = ssam_nf_refcount_dec(nf, n->event.reg, n->event.id);
+		if (entry->refcount == 0)
+			kfree(entry);
+
+		mutex_unlock(&nf->lock);
+		return status;
+	}
+
+	if (entry->refcount == 1) {
+		status = ssam_ssh_event_enable(ctrl, n->event.reg, n->event.id,
+					       n->event.flags);
+		if (status) {
+			ssam_nfblk_remove(&n->base);
+			kfree(ssam_nf_refcount_dec(nf, n->event.reg, n->event.id));
+			mutex_unlock(&nf->lock);
+			synchronize_srcu(&nf_head->srcu);
+			return status;
+		}
+
+		entry->flags = n->event.flags;
+
+	} else if (entry->flags != n->event.flags) {
+		ssam_warn(ctrl,
+			  "inconsistent flags when enabling event: got %#04x, expected %#04x (reg: %#04x, tc: %#04x, iid: %#04x)\n",
+			  n->event.flags, entry->flags, n->event.reg.target_category,
+			  n->event.id.target_category, n->event.id.instance);
+	}
+
+	mutex_unlock(&nf->lock);
+	return 0;
+}
+EXPORT_SYMBOL_GPL(ssam_notifier_register);
+
+/**
+ * ssam_notifier_unregister() - Unregister an event notifier.
+ * @ctrl: The controller the notifier has been registered on.
+ * @n:    The event notifier to unregister.
+ *
+ * Unregister an event notifier and decrement the usage counter of the
+ * associated SAM event. If the usage counter reaches zero, the event will be
+ * disabled.
+ *
+ * Return: Returns zero on success, %-ENOENT if the given notifier block has
+ * not been registered on the controller. If the given notifier block was the
+ * last one associated with its specific event, returns the status of the
+ * event-disable EC-command.
+ */
+int ssam_notifier_unregister(struct ssam_controller *ctrl,
+			     struct ssam_event_notifier *n)
+{
+	u16 rqid = ssh_tc_to_rqid(n->event.id.target_category);
+	struct ssam_nf_refcount_entry *entry;
+	struct ssam_nf_head *nf_head;
+	struct ssam_nf *nf;
+	int status = 0;
+
+	if (!ssh_rqid_is_event(rqid))
+		return -EINVAL;
+
+	nf = &ctrl->cplt.event.notif;
+	nf_head = &nf->head[ssh_rqid_to_event(rqid)];
+
+	mutex_lock(&nf->lock);
+
+	if (!ssam_nfblk_find(nf_head, &n->base)) {
+		mutex_unlock(&nf->lock);
+		return -ENOENT;
+	}
+
+	entry = ssam_nf_refcount_dec(nf, n->event.reg, n->event.id);
+	if (WARN_ON(!entry)) {
+		/*
+		 * If this does not return an entry, there's a logic error
+		 * somewhere: The notifier block is registered, but the event
+		 * refcount entry is not there. Remove the notifier block
+		 * anyways.
+		 */
+		status = -ENOENT;
+		goto remove;
+	}
+
+	ssam_dbg(ctrl, "disabling event (reg: %#04x, tc: %#04x, iid: %#04x, rc: %d)\n",
+		 n->event.reg.target_category, n->event.id.target_category,
+		 n->event.id.instance, entry->refcount);
+
+	if (entry->flags != n->event.flags) {
+		ssam_warn(ctrl,
+			  "inconsistent flags when disabling event: got %#04x, expected %#04x (reg: %#04x, tc: %#04x, iid: %#04x)\n",
+			  n->event.flags, entry->flags, n->event.reg.target_category,
+			  n->event.id.target_category, n->event.id.instance);
+	}
+
+	if (entry->refcount == 0) {
+		status = ssam_ssh_event_disable(ctrl, n->event.reg, n->event.id,
+						n->event.flags);
+		kfree(entry);
+	}
+
+remove:
+	ssam_nfblk_remove(&n->base);
+	mutex_unlock(&nf->lock);
+	synchronize_srcu(&nf_head->srcu);
+
+	return status;
+}
+EXPORT_SYMBOL_GPL(ssam_notifier_unregister);
+
+/**
+ * ssam_notifier_disable_registered() - Disable events for all registered
+ * notifiers.
+ * @ctrl: The controller for which to disable the notifiers/events.
+ *
+ * Disables events for all currently registered notifiers. In case of an error
+ * (EC command failing), all previously disabled events will be restored and
+ * the error code returned.
+ *
+ * This function is intended to disable all events prior to hibernation entry.
+ * See ssam_notifier_restore_registered() to restore/re-enable all events
+ * disabled with this function.
+ *
+ * Note that this function will not disable events for notifiers registered
+ * after calling this function. It should thus be made sure that no new
+ * notifiers are going to be added after this call and before the corresponding
+ * call to ssam_notifier_restore_registered().
+ *
+ * Return: Returns zero on success. In case of failure returns the error code
+ * returned by the failed EC command to disable an event.
+ */
+int ssam_notifier_disable_registered(struct ssam_controller *ctrl)
+{
+	struct ssam_nf *nf = &ctrl->cplt.event.notif;
+	struct rb_node *n;
+	int status;
+
+	mutex_lock(&nf->lock);
+	for (n = rb_first(&nf->refcount); n; n = rb_next(n)) {
+		struct ssam_nf_refcount_entry *e;
+
+		e = rb_entry(n, struct ssam_nf_refcount_entry, node);
+		status = ssam_ssh_event_disable(ctrl, e->key.reg,
+						e->key.id, e->flags);
+		if (status)
+			goto err;
+	}
+	mutex_unlock(&nf->lock);
+
+	return 0;
+
+err:
+	for (n = rb_prev(n); n; n = rb_prev(n)) {
+		struct ssam_nf_refcount_entry *e;
+
+		e = rb_entry(n, struct ssam_nf_refcount_entry, node);
+		ssam_ssh_event_enable(ctrl, e->key.reg, e->key.id, e->flags);
+	}
+	mutex_unlock(&nf->lock);
+
+	return status;
+}
+
+/**
+ * ssam_notifier_restore_registered() - Restore/re-enable events for all
+ * registered notifiers.
+ * @ctrl: The controller for which to restore the notifiers/events.
+ *
+ * Restores/re-enables all events for which notifiers have been registered on
+ * the given controller. In case of a failure, the error is logged and the
+ * function continues to try and enable the remaining events.
+ *
+ * This function is intended to restore/re-enable all registered events after
+ * hibernation. See ssam_notifier_disable_registered() for the counter part
+ * disabling the events and more details.
+ */
+void ssam_notifier_restore_registered(struct ssam_controller *ctrl)
+{
+	struct ssam_nf *nf = &ctrl->cplt.event.notif;
+	struct rb_node *n;
+
+	mutex_lock(&nf->lock);
+	for (n = rb_first(&nf->refcount); n; n = rb_next(n)) {
+		struct ssam_nf_refcount_entry *e;
+
+		e = rb_entry(n, struct ssam_nf_refcount_entry, node);
+
+		/* Ignore errors, will get logged in call. */
+		ssam_ssh_event_enable(ctrl, e->key.reg, e->key.id, e->flags);
+	}
+	mutex_unlock(&nf->lock);
+}
+
+/**
+ * ssam_notifier_is_empty() - Check if there are any registered notifiers.
+ * @ctrl: The controller to check on.
+ *
+ * Return: Returns %true if there are currently no notifiers registered on the
+ * controller, %false otherwise.
+ */
+static bool ssam_notifier_is_empty(struct ssam_controller *ctrl)
+{
+	struct ssam_nf *nf = &ctrl->cplt.event.notif;
+	bool result;
+
+	mutex_lock(&nf->lock);
+	result = ssam_nf_refcount_empty(nf);
+	mutex_unlock(&nf->lock);
+
+	return result;
+}
+
+/**
+ * ssam_notifier_unregister_all() - Unregister all currently registered
+ * notifiers.
+ * @ctrl: The controller to unregister the notifiers on.
+ *
+ * Unregisters all currently registered notifiers. This function is used to
+ * ensure that all notifiers will be unregistered and associated
+ * entries/resources freed when the controller is being shut down.
+ */
+static void ssam_notifier_unregister_all(struct ssam_controller *ctrl)
+{
+	struct ssam_nf *nf = &ctrl->cplt.event.notif;
+	struct ssam_nf_refcount_entry *e, *n;
+
+	mutex_lock(&nf->lock);
+	rbtree_postorder_for_each_entry_safe(e, n, &nf->refcount, node) {
+		/* Ignore errors, will get logged in call. */
+		ssam_ssh_event_disable(ctrl, e->key.reg, e->key.id, e->flags);
+		kfree(e);
+	}
+	nf->refcount = RB_ROOT;
+	mutex_unlock(&nf->lock);
+}
+
+
+/* -- Wakeup IRQ. ----------------------------------------------------------- */
+
+static irqreturn_t ssam_irq_handle(int irq, void *dev_id)
+{
+	struct ssam_controller *ctrl = dev_id;
+
+	ssam_dbg(ctrl, "pm: wake irq triggered\n");
+
+	/*
+	 * Note: Proper wakeup detection is currently unimplemented.
+	 *       When the EC is in display-off or any other non-D0 state, it
+	 *       does not send events/notifications to the host. Instead it
+	 *       signals that there are events available via the wakeup IRQ.
+	 *       This driver is responsible for calling back to the EC to
+	 *       release these events one-by-one.
+	 *
+	 *       This IRQ should not cause a full system resume by its own.
+	 *       Instead, events should be handled by their respective subsystem
+	 *       drivers, which in turn should signal whether a full system
+	 *       resume should be performed.
+	 *
+	 * TODO: Send GPIO callback command repeatedly to EC until callback
+	 *       returns 0x00. Return flag of callback is "has more events".
+	 *       Each time the command is sent, one event is "released". Once
+	 *       all events have been released (return = 0x00), the GPIO is
+	 *       re-armed. Detect wakeup events during this process, go back to
+	 *       sleep if no wakeup event has been received.
+	 */
+
+	return IRQ_HANDLED;
+}
+
+/**
+ * ssam_irq_setup() - Set up SAM EC wakeup-GPIO interrupt.
+ * @ctrl: The controller for which the IRQ should be set up.
+ *
+ * Set up an IRQ for the wakeup-GPIO pin of the SAM EC. This IRQ can be used
+ * to wake the device from a low power state.
+ *
+ * Note that this IRQ can only be triggered while the EC is in the display-off
+ * state. In this state, events are not sent to the host in the usual way.
+ * Instead the wakeup-GPIO gets pulled to "high" as long as there are pending
+ * events and these events need to be released one-by-one via the GPIO
+ * callback request, either until there are no events left and the GPIO is
+ * reset, or all at once by transitioning the EC out of the display-off state,
+ * which will also clear the GPIO.
+ *
+ * Not all events, however, should trigger a full system wakeup. Instead the
+ * driver should, if necessary, inspect and forward each event to the
+ * corresponding subsystem, which in turn should decide if the system needs to
+ * be woken up. This logic has not been implemented yet, thus wakeup by this
+ * IRQ should be disabled by default to avoid spurious wake-ups, caused, for
+ * example, by the remaining battery percentage changing. Refer to comments in
+ * this function and comments in the corresponding IRQ handler for more
+ * details on how this should be implemented.
+ *
+ * See also ssam_ctrl_notif_display_off() and ssam_ctrl_notif_display_off()
+ * for functions to transition the EC into and out of the display-off state as
+ * well as more details on it.
+ *
+ * The IRQ is disabled by default and has to be enabled before it can wake up
+ * the device from suspend via ssam_irq_arm_for_wakeup(). On teardown, the IRQ
+ * should be freed via ssam_irq_free().
+ */
+int ssam_irq_setup(struct ssam_controller *ctrl)
+{
+	struct device *dev = ssam_controller_device(ctrl);
+	struct gpio_desc *gpiod;
+	int irq;
+	int status;
+
+	/*
+	 * The actual GPIO interrupt is declared in ACPI as TRIGGER_HIGH.
+	 * However, the GPIO line only gets reset by sending the GPIO callback
+	 * command to SAM (or alternatively the display-on notification). As
+	 * proper handling for this interrupt is not implemented yet, leaving
+	 * the IRQ at TRIGGER_HIGH would cause an IRQ storm (as the callback
+	 * never gets sent and thus the line never gets reset). To avoid this,
+	 * mark the IRQ as TRIGGER_RISING for now, only creating a single
+	 * interrupt, and let the SAM resume callback during the controller
+	 * resume process clear it.
+	 */
+	const int irqf = IRQF_SHARED | IRQF_ONESHOT | IRQF_TRIGGER_RISING;
+
+	gpiod = gpiod_get(dev, "ssam_wakeup-int", GPIOD_ASIS);
+	if (IS_ERR(gpiod))
+		return PTR_ERR(gpiod);
+
+	irq = gpiod_to_irq(gpiod);
+	gpiod_put(gpiod);
+
+	if (irq < 0)
+		return irq;
+
+	status = request_threaded_irq(irq, NULL, ssam_irq_handle, irqf,
+				      "ssam_wakeup", ctrl);
+	if (status)
+		return status;
+
+	ctrl->irq.num = irq;
+	disable_irq(ctrl->irq.num);
+	return 0;
+}
+
+/**
+ * ssam_irq_free() - Free SAM EC wakeup-GPIO interrupt.
+ * @ctrl: The controller for which the IRQ should be freed.
+ *
+ * Free the wakeup-GPIO IRQ previously set-up via ssam_irq_setup().
+ */
+void ssam_irq_free(struct ssam_controller *ctrl)
+{
+	free_irq(ctrl->irq.num, ctrl);
+	ctrl->irq.num = -1;
+}
+
+/**
+ * ssam_irq_arm_for_wakeup() - Arm the EC IRQ for wakeup, if enabled.
+ * @ctrl: The controller for which the IRQ should be armed.
+ *
+ * Sets up the IRQ so that it can be used to wake the device. Specifically,
+ * this function enables the irq and then, if the device is allowed to wake up
+ * the system, calls enable_irq_wake(). See ssam_irq_disarm_wakeup() for the
+ * corresponding function to disable the IRQ.
+ *
+ * This function is intended to arm the IRQ before entering S2idle suspend.
+ *
+ * Note: calls to ssam_irq_arm_for_wakeup() and ssam_irq_disarm_wakeup() must
+ * be balanced.
+ */
+int ssam_irq_arm_for_wakeup(struct ssam_controller *ctrl)
+{
+	struct device *dev = ssam_controller_device(ctrl);
+	int status;
+
+	enable_irq(ctrl->irq.num);
+	if (device_may_wakeup(dev)) {
+		status = enable_irq_wake(ctrl->irq.num);
+		if (status) {
+			ssam_err(ctrl, "failed to enable wake IRQ: %d\n", status);
+			disable_irq(ctrl->irq.num);
+			return status;
+		}
+
+		ctrl->irq.wakeup_enabled = true;
+	} else {
+		ctrl->irq.wakeup_enabled = false;
+	}
+
+	return 0;
+}
+
+/**
+ * ssam_irq_disarm_wakeup() - Disarm the wakeup IRQ.
+ * @ctrl: The controller for which the IRQ should be disarmed.
+ *
+ * Disarm the IRQ previously set up for wake via ssam_irq_arm_for_wakeup().
+ *
+ * This function is intended to disarm the IRQ after exiting S2idle suspend.
+ *
+ * Note: calls to ssam_irq_arm_for_wakeup() and ssam_irq_disarm_wakeup() must
+ * be balanced.
+ */
+void ssam_irq_disarm_wakeup(struct ssam_controller *ctrl)
+{
+	int status;
+
+	if (ctrl->irq.wakeup_enabled) {
+		status = disable_irq_wake(ctrl->irq.num);
+		if (status)
+			ssam_err(ctrl, "failed to disable wake IRQ: %d\n", status);
+
+		ctrl->irq.wakeup_enabled = false;
+	}
+	disable_irq(ctrl->irq.num);
+}
diff --git a/drivers/platform/surface/aggregator/controller.h b/drivers/platform/surface/aggregator/controller.h
new file mode 100644
index 000000000000..8297d34e7489
--- /dev/null
+++ b/drivers/platform/surface/aggregator/controller.h
@@ -0,0 +1,285 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Main SSAM/SSH controller structure and functionality.
+ *
+ * Copyright (C) 2019-2020 Maximilian Luz <luzmaximilian@gmail.com>
+ */
+
+#ifndef _SURFACE_AGGREGATOR_CONTROLLER_H
+#define _SURFACE_AGGREGATOR_CONTROLLER_H
+
+#include <linux/kref.h>
+#include <linux/list.h>
+#include <linux/mutex.h>
+#include <linux/rbtree.h>
+#include <linux/rwsem.h>
+#include <linux/serdev.h>
+#include <linux/spinlock.h>
+#include <linux/srcu.h>
+#include <linux/types.h>
+#include <linux/workqueue.h>
+
+#include <linux/surface_aggregator/controller.h>
+#include <linux/surface_aggregator/serial_hub.h>
+
+#include "ssh_request_layer.h"
+
+
+/* -- Safe counters. -------------------------------------------------------- */
+
+/**
+ * struct ssh_seq_counter - Safe counter for SSH sequence IDs.
+ * @value: The current counter value.
+ */
+struct ssh_seq_counter {
+	u8 value;
+};
+
+/**
+ * struct ssh_rqid_counter - Safe counter for SSH request IDs.
+ * @value: The current counter value.
+ */
+struct ssh_rqid_counter {
+	u16 value;
+};
+
+
+/* -- Event/notification system. -------------------------------------------- */
+
+/**
+ * struct ssam_nf_head - Notifier head for SSAM events.
+ * @srcu: The SRCU struct for synchronization.
+ * @head: List-head for notifier blocks registered under this head.
+ */
+struct ssam_nf_head {
+	struct srcu_struct srcu;
+	struct list_head head;
+};
+
+/**
+ * struct ssam_nf - Notifier callback- and activation-registry for SSAM events.
+ * @lock:     Lock guarding (de-)registration of notifier blocks. Note: This
+ *            lock does not need to be held for notifier calls, only
+ *            registration and deregistration.
+ * @refcount: The root of the RB-tree used for reference-counting enabled
+ *            events/notifications.
+ * @head:     The list of notifier heads for event/notification callbacks.
+ */
+struct ssam_nf {
+	struct mutex lock;
+	struct rb_root refcount;
+	struct ssam_nf_head head[SSH_NUM_EVENTS];
+};
+
+
+/* -- Event/async request completion system. -------------------------------- */
+
+struct ssam_cplt;
+
+/**
+ * struct ssam_event_item - Struct for event queuing and completion.
+ * @node:     The node in the queue.
+ * @rqid:     The request ID of the event.
+ * @ops:      Instance specific functions.
+ * @ops.free: Callback for freeing this event item.
+ * @event:    Actual event data.
+ */
+struct ssam_event_item {
+	struct list_head node;
+	u16 rqid;
+
+	struct {
+		void (*free)(struct ssam_event_item *event);
+	} ops;
+
+	struct ssam_event event;	/* must be last */
+};
+
+/**
+ * struct ssam_event_queue - Queue for completing received events.
+ * @cplt: Reference to the completion system on which this queue is active.
+ * @lock: The lock for any operation on the queue.
+ * @head: The list-head of the queue.
+ * @work: The &struct work_struct performing completion work for this queue.
+ */
+struct ssam_event_queue {
+	struct ssam_cplt *cplt;
+
+	spinlock_t lock;
+	struct list_head head;
+	struct work_struct work;
+};
+
+/**
+ * struct ssam_event_target - Set of queues for a single SSH target ID.
+ * @queue: The array of queues, one queue per event ID.
+ */
+struct ssam_event_target {
+	struct ssam_event_queue queue[SSH_NUM_EVENTS];
+};
+
+/**
+ * struct ssam_cplt - SSAM event/async request completion system.
+ * @dev:          The device with which this system is associated. Only used
+ *                for logging.
+ * @wq:           The &struct workqueue_struct on which all completion work
+ *                items are queued.
+ * @event:        Event completion management.
+ * @event.target: Array of &struct ssam_event_target, one for each target.
+ * @event.notif:  Notifier callbacks and event activation reference counting.
+ */
+struct ssam_cplt {
+	struct device *dev;
+	struct workqueue_struct *wq;
+
+	struct {
+		struct ssam_event_target target[SSH_NUM_TARGETS];
+		struct ssam_nf notif;
+	} event;
+};
+
+
+/* -- Main SSAM device structures. ------------------------------------------ */
+
+/**
+ * enum ssam_controller_state - State values for &struct ssam_controller.
+ * @SSAM_CONTROLLER_UNINITIALIZED:
+ *	The controller has not been initialized yet or has been deinitialized.
+ * @SSAM_CONTROLLER_INITIALIZED:
+ *	The controller is initialized, but has not been started yet.
+ * @SSAM_CONTROLLER_STARTED:
+ *	The controller has been started and is ready to use.
+ * @SSAM_CONTROLLER_STOPPED:
+ *	The controller has been stopped.
+ * @SSAM_CONTROLLER_SUSPENDED:
+ *	The controller has been suspended.
+ */
+enum ssam_controller_state {
+	SSAM_CONTROLLER_UNINITIALIZED,
+	SSAM_CONTROLLER_INITIALIZED,
+	SSAM_CONTROLLER_STARTED,
+	SSAM_CONTROLLER_STOPPED,
+	SSAM_CONTROLLER_SUSPENDED,
+};
+
+/**
+ * struct ssam_controller_caps - Controller device capabilities.
+ * @ssh_power_profile:             SSH power profile.
+ * @ssh_buffer_size:               SSH driver UART buffer size.
+ * @screen_on_sleep_idle_timeout:  SAM UART screen-on sleep idle timeout.
+ * @screen_off_sleep_idle_timeout: SAM UART screen-off sleep idle timeout.
+ * @d3_closes_handle:              SAM closes UART handle in D3.
+ *
+ * Controller and SSH device capabilities found in ACPI.
+ */
+struct ssam_controller_caps {
+	u32 ssh_power_profile;
+	u32 ssh_buffer_size;
+	u32 screen_on_sleep_idle_timeout;
+	u32 screen_off_sleep_idle_timeout;
+	u32 d3_closes_handle:1;
+};
+
+/**
+ * struct ssam_controller - SSAM controller device.
+ * @kref:  Reference count of the controller.
+ * @lock:  Main lock for the controller, used to guard state changes.
+ * @state: Controller state.
+ * @rtl:   Request transport layer for SSH I/O.
+ * @cplt:  Completion system for SSH/SSAM events and asynchronous requests.
+ * @counter:      Safe SSH message ID counters.
+ * @counter.seq:  Sequence ID counter.
+ * @counter.rqid: Request ID counter.
+ * @irq:          Wakeup IRQ resources.
+ * @irq.num:      The wakeup IRQ number.
+ * @irq.wakeup_enabled: Whether wakeup by IRQ is enabled during suspend.
+ * @caps: The controller device capabilities.
+ */
+struct ssam_controller {
+	struct kref kref;
+
+	struct rw_semaphore lock;
+	enum ssam_controller_state state;
+
+	struct ssh_rtl rtl;
+	struct ssam_cplt cplt;
+
+	struct {
+		struct ssh_seq_counter seq;
+		struct ssh_rqid_counter rqid;
+	} counter;
+
+	struct {
+		int num;
+		bool wakeup_enabled;
+	} irq;
+
+	struct ssam_controller_caps caps;
+};
+
+#define to_ssam_controller(ptr, member) \
+	container_of(ptr, struct ssam_controller, member)
+
+#define ssam_dbg(ctrl, fmt, ...)  rtl_dbg(&(ctrl)->rtl, fmt, ##__VA_ARGS__)
+#define ssam_info(ctrl, fmt, ...) rtl_info(&(ctrl)->rtl, fmt, ##__VA_ARGS__)
+#define ssam_warn(ctrl, fmt, ...) rtl_warn(&(ctrl)->rtl, fmt, ##__VA_ARGS__)
+#define ssam_err(ctrl, fmt, ...)  rtl_err(&(ctrl)->rtl, fmt, ##__VA_ARGS__)
+
+/**
+ * ssam_controller_receive_buf() - Provide input-data to the controller.
+ * @ctrl: The controller.
+ * @buf:  The input buffer.
+ * @n:    The number of bytes in the input buffer.
+ *
+ * Provide input data to be evaluated by the controller, which has been
+ * received via the lower-level transport.
+ *
+ * Return: Returns the number of bytes consumed, or, if the packet transport
+ * layer of the controller has been shut down, %-ESHUTDOWN.
+ */
+static inline
+int ssam_controller_receive_buf(struct ssam_controller *ctrl,
+				const unsigned char *buf, size_t n)
+{
+	return ssh_ptl_rx_rcvbuf(&ctrl->rtl.ptl, buf, n);
+}
+
+/**
+ * ssam_controller_write_wakeup() - Notify the controller that the underlying
+ * device has space available for data to be written.
+ * @ctrl: The controller.
+ */
+static inline void ssam_controller_write_wakeup(struct ssam_controller *ctrl)
+{
+	ssh_ptl_tx_wakeup_transfer(&ctrl->rtl.ptl);
+}
+
+int ssam_controller_init(struct ssam_controller *ctrl, struct serdev_device *s);
+int ssam_controller_start(struct ssam_controller *ctrl);
+void ssam_controller_shutdown(struct ssam_controller *ctrl);
+void ssam_controller_destroy(struct ssam_controller *ctrl);
+
+int ssam_notifier_disable_registered(struct ssam_controller *ctrl);
+void ssam_notifier_restore_registered(struct ssam_controller *ctrl);
+
+int ssam_irq_setup(struct ssam_controller *ctrl);
+void ssam_irq_free(struct ssam_controller *ctrl);
+int ssam_irq_arm_for_wakeup(struct ssam_controller *ctrl);
+void ssam_irq_disarm_wakeup(struct ssam_controller *ctrl);
+
+void ssam_controller_lock(struct ssam_controller *c);
+void ssam_controller_unlock(struct ssam_controller *c);
+
+int ssam_get_firmware_version(struct ssam_controller *ctrl, u32 *version);
+int ssam_ctrl_notif_display_off(struct ssam_controller *ctrl);
+int ssam_ctrl_notif_display_on(struct ssam_controller *ctrl);
+int ssam_ctrl_notif_d0_exit(struct ssam_controller *ctrl);
+int ssam_ctrl_notif_d0_entry(struct ssam_controller *ctrl);
+
+int ssam_controller_suspend(struct ssam_controller *ctrl);
+int ssam_controller_resume(struct ssam_controller *ctrl);
+
+int ssam_event_item_cache_init(void);
+void ssam_event_item_cache_destroy(void);
+
+#endif /* _SURFACE_AGGREGATOR_CONTROLLER_H */
diff --git a/drivers/platform/surface/aggregator/core.c b/drivers/platform/surface/aggregator/core.c
new file mode 100644
index 000000000000..8dc2c267bcd6
--- /dev/null
+++ b/drivers/platform/surface/aggregator/core.c
@@ -0,0 +1,839 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Surface Serial Hub (SSH) driver for communication with the Surface/System
+ * Aggregator Module (SSAM/SAM).
+ *
+ * Provides access to a SAM-over-SSH connected EC via a controller device.
+ * Handles communication via requests as well as enabling, disabling, and
+ * relaying of events.
+ *
+ * Copyright (C) 2019-2020 Maximilian Luz <luzmaximilian@gmail.com>
+ */
+
+#include <linux/acpi.h>
+#include <linux/atomic.h>
+#include <linux/completion.h>
+#include <linux/gpio/consumer.h>
+#include <linux/kernel.h>
+#include <linux/kref.h>
+#include <linux/module.h>
+#include <linux/pm.h>
+#include <linux/serdev.h>
+#include <linux/sysfs.h>
+
+#include <linux/surface_aggregator/controller.h>
+
+#include "bus.h"
+#include "controller.h"
+
+#define CREATE_TRACE_POINTS
+#include "trace.h"
+
+
+/* -- Static controller reference. ------------------------------------------ */
+
+/*
+ * Main controller reference. The corresponding lock must be held while
+ * accessing (reading/writing) the reference.
+ */
+static struct ssam_controller *__ssam_controller;
+static DEFINE_SPINLOCK(__ssam_controller_lock);
+
+/**
+ * ssam_get_controller() - Get reference to SSAM controller.
+ *
+ * Returns a reference to the SSAM controller of the system or %NULL if there
+ * is none, it hasn't been set up yet, or it has already been unregistered.
+ * This function automatically increments the reference count of the
+ * controller, thus the calling party must ensure that ssam_controller_put()
+ * is called when it doesn't need the controller any more.
+ */
+struct ssam_controller *ssam_get_controller(void)
+{
+	struct ssam_controller *ctrl;
+
+	spin_lock(&__ssam_controller_lock);
+
+	ctrl = __ssam_controller;
+	if (!ctrl)
+		goto out;
+
+	if (WARN_ON(!kref_get_unless_zero(&ctrl->kref)))
+		ctrl = NULL;
+
+out:
+	spin_unlock(&__ssam_controller_lock);
+	return ctrl;
+}
+EXPORT_SYMBOL_GPL(ssam_get_controller);
+
+/**
+ * ssam_try_set_controller() - Try to set the main controller reference.
+ * @ctrl: The controller to which the reference should point.
+ *
+ * Set the main controller reference to the given pointer if the reference
+ * hasn't been set already.
+ *
+ * Return: Returns zero on success or %-EEXIST if the reference has already
+ * been set.
+ */
+static int ssam_try_set_controller(struct ssam_controller *ctrl)
+{
+	int status = 0;
+
+	spin_lock(&__ssam_controller_lock);
+	if (!__ssam_controller)
+		__ssam_controller = ctrl;
+	else
+		status = -EEXIST;
+	spin_unlock(&__ssam_controller_lock);
+
+	return status;
+}
+
+/**
+ * ssam_clear_controller() - Remove/clear the main controller reference.
+ *
+ * Clears the main controller reference, i.e. sets it to %NULL. This function
+ * should be called before the controller is shut down.
+ */
+static void ssam_clear_controller(void)
+{
+	spin_lock(&__ssam_controller_lock);
+	__ssam_controller = NULL;
+	spin_unlock(&__ssam_controller_lock);
+}
+
+/**
+ * ssam_client_link() - Link an arbitrary client device to the controller.
+ * @c: The controller to link to.
+ * @client: The client device.
+ *
+ * Link an arbitrary client device to the controller by creating a device link
+ * between it as consumer and the controller device as provider. This function
+ * can be used for non-SSAM devices (or SSAM devices not registered as child
+ * under the controller) to guarantee that the controller is valid for as long
+ * as the driver of the client device is bound, and that proper suspend and
+ * resume ordering is guaranteed.
+ *
+ * The device link does not have to be destructed manually. It is removed
+ * automatically once the driver of the client device unbinds.
+ *
+ * Return: Returns zero on success, %-ENODEV if the controller is not ready or
+ * going to be removed soon, or %-ENOMEM if the device link could not be
+ * created for other reasons.
+ */
+int ssam_client_link(struct ssam_controller *c, struct device *client)
+{
+	const u32 flags = DL_FLAG_PM_RUNTIME | DL_FLAG_AUTOREMOVE_CONSUMER;
+	struct device_link *link;
+	struct device *ctrldev;
+
+	ssam_controller_statelock(c);
+
+	if (c->state != SSAM_CONTROLLER_STARTED) {
+		ssam_controller_stateunlock(c);
+		return -ENODEV;
+	}
+
+	ctrldev = ssam_controller_device(c);
+	if (!ctrldev) {
+		ssam_controller_stateunlock(c);
+		return -ENODEV;
+	}
+
+	link = device_link_add(client, ctrldev, flags);
+	if (!link) {
+		ssam_controller_stateunlock(c);
+		return -ENOMEM;
+	}
+
+	/*
+	 * Return -ENODEV if supplier driver is on its way to be removed. In
+	 * this case, the controller won't be around for much longer and the
+	 * device link is not going to save us any more, as unbinding is
+	 * already in progress.
+	 */
+	if (READ_ONCE(link->status) == DL_STATE_SUPPLIER_UNBIND) {
+		ssam_controller_stateunlock(c);
+		return -ENODEV;
+	}
+
+	ssam_controller_stateunlock(c);
+	return 0;
+}
+EXPORT_SYMBOL_GPL(ssam_client_link);
+
+/**
+ * ssam_client_bind() - Bind an arbitrary client device to the controller.
+ * @client: The client device.
+ *
+ * Link an arbitrary client device to the controller by creating a device link
+ * between it as consumer and the main controller device as provider. This
+ * function can be used for non-SSAM devices to guarantee that the controller
+ * returned by this function is valid for as long as the driver of the client
+ * device is bound, and that proper suspend and resume ordering is guaranteed.
+ *
+ * This function does essentially the same as ssam_client_link(), except that
+ * it first fetches the main controller reference, then creates the link, and
+ * finally returns this reference. Note that this function does not increment
+ * the reference counter of the controller, as, due to the link, the
+ * controller lifetime is assured as long as the driver of the client device
+ * is bound.
+ *
+ * It is not valid to use the controller reference obtained by this method
+ * outside of the driver bound to the client device at the time of calling
+ * this function, without first incrementing the reference count of the
+ * controller via ssam_controller_get(). Even after doing this, care must be
+ * taken that requests are only submitted and notifiers are only
+ * (un-)registered when the controller is active and not suspended. In other
+ * words: The device link only lives as long as the client driver is bound and
+ * any guarantees enforced by this link (e.g. active controller state) can
+ * only be relied upon as long as this link exists and may need to be enforced
+ * in other ways afterwards.
+ *
+ * The created device link does not have to be destructed manually. It is
+ * removed automatically once the driver of the client device unbinds.
+ *
+ * Return: Returns the controller on success, an error pointer with %-ENODEV
+ * if the controller is not present, not ready or going to be removed soon, or
+ * %-ENOMEM if the device link could not be created for other reasons.
+ */
+struct ssam_controller *ssam_client_bind(struct device *client)
+{
+	struct ssam_controller *c;
+	int status;
+
+	c = ssam_get_controller();
+	if (!c)
+		return ERR_PTR(-ENODEV);
+
+	status = ssam_client_link(c, client);
+
+	/*
+	 * Note that we can drop our controller reference in both success and
+	 * failure cases: On success, we have bound the controller lifetime
+	 * inherently to the client driver lifetime, i.e. it the controller is
+	 * now guaranteed to outlive the client driver. On failure, we're not
+	 * going to use the controller any more.
+	 */
+	ssam_controller_put(c);
+
+	return status >= 0 ? c : ERR_PTR(status);
+}
+EXPORT_SYMBOL_GPL(ssam_client_bind);
+
+
+/* -- Glue layer (serdev_device -> ssam_controller). ------------------------ */
+
+static int ssam_receive_buf(struct serdev_device *dev, const unsigned char *buf,
+			    size_t n)
+{
+	struct ssam_controller *ctrl;
+
+	ctrl = serdev_device_get_drvdata(dev);
+	return ssam_controller_receive_buf(ctrl, buf, n);
+}
+
+static void ssam_write_wakeup(struct serdev_device *dev)
+{
+	ssam_controller_write_wakeup(serdev_device_get_drvdata(dev));
+}
+
+static const struct serdev_device_ops ssam_serdev_ops = {
+	.receive_buf = ssam_receive_buf,
+	.write_wakeup = ssam_write_wakeup,
+};
+
+
+/* -- SysFS and misc. ------------------------------------------------------- */
+
+static int ssam_log_firmware_version(struct ssam_controller *ctrl)
+{
+	u32 version, a, b, c;
+	int status;
+
+	status = ssam_get_firmware_version(ctrl, &version);
+	if (status)
+		return status;
+
+	a = (version >> 24) & 0xff;
+	b = ((version >> 8) & 0xffff);
+	c = version & 0xff;
+
+	ssam_info(ctrl, "SAM firmware version: %u.%u.%u\n", a, b, c);
+	return 0;
+}
+
+static ssize_t firmware_version_show(struct device *dev,
+				     struct device_attribute *attr, char *buf)
+{
+	struct ssam_controller *ctrl = dev_get_drvdata(dev);
+	u32 version, a, b, c;
+	int status;
+
+	status = ssam_get_firmware_version(ctrl, &version);
+	if (status < 0)
+		return status;
+
+	a = (version >> 24) & 0xff;
+	b = ((version >> 8) & 0xffff);
+	c = version & 0xff;
+
+	return sysfs_emit(buf, "%u.%u.%u\n", a, b, c);
+}
+static DEVICE_ATTR_RO(firmware_version);
+
+static struct attribute *ssam_sam_attrs[] = {
+	&dev_attr_firmware_version.attr,
+	NULL
+};
+
+static const struct attribute_group ssam_sam_group = {
+	.name = "sam",
+	.attrs = ssam_sam_attrs,
+};
+
+
+/* -- ACPI based device setup. ---------------------------------------------- */
+
+static acpi_status ssam_serdev_setup_via_acpi_crs(struct acpi_resource *rsc,
+						  void *ctx)
+{
+	struct serdev_device *serdev = ctx;
+	struct acpi_resource_common_serialbus *serial;
+	struct acpi_resource_uart_serialbus *uart;
+	bool flow_control;
+	int status = 0;
+
+	if (rsc->type != ACPI_RESOURCE_TYPE_SERIAL_BUS)
+		return AE_OK;
+
+	serial = &rsc->data.common_serial_bus;
+	if (serial->type != ACPI_RESOURCE_SERIAL_TYPE_UART)
+		return AE_OK;
+
+	uart = &rsc->data.uart_serial_bus;
+
+	/* Set up serdev device. */
+	serdev_device_set_baudrate(serdev, uart->default_baud_rate);
+
+	/* serdev currently only supports RTSCTS flow control. */
+	if (uart->flow_control & (~((u8)ACPI_UART_FLOW_CONTROL_HW))) {
+		dev_warn(&serdev->dev, "setup: unsupported flow control (value: %#04x)\n",
+			 uart->flow_control);
+	}
+
+	/* Set RTSCTS flow control. */
+	flow_control = uart->flow_control & ACPI_UART_FLOW_CONTROL_HW;
+	serdev_device_set_flow_control(serdev, flow_control);
+
+	/* serdev currently only supports EVEN/ODD parity. */
+	switch (uart->parity) {
+	case ACPI_UART_PARITY_NONE:
+		status = serdev_device_set_parity(serdev, SERDEV_PARITY_NONE);
+		break;
+	case ACPI_UART_PARITY_EVEN:
+		status = serdev_device_set_parity(serdev, SERDEV_PARITY_EVEN);
+		break;
+	case ACPI_UART_PARITY_ODD:
+		status = serdev_device_set_parity(serdev, SERDEV_PARITY_ODD);
+		break;
+	default:
+		dev_warn(&serdev->dev, "setup: unsupported parity (value: %#04x)\n",
+			 uart->parity);
+		break;
+	}
+
+	if (status) {
+		dev_err(&serdev->dev, "setup: failed to set parity (value: %#04x, error: %d)\n",
+			uart->parity, status);
+		return AE_ERROR;
+	}
+
+	/* We've found the resource and are done. */
+	return AE_CTRL_TERMINATE;
+}
+
+static acpi_status ssam_serdev_setup_via_acpi(acpi_handle handle,
+					      struct serdev_device *serdev)
+{
+	return acpi_walk_resources(handle, METHOD_NAME__CRS,
+				   ssam_serdev_setup_via_acpi_crs, serdev);
+}
+
+
+/* -- Power management. ----------------------------------------------------- */
+
+static void ssam_serial_hub_shutdown(struct device *dev)
+{
+	struct ssam_controller *c = dev_get_drvdata(dev);
+	int status;
+
+	/*
+	 * Try to disable notifiers, signal display-off and D0-exit, ignore any
+	 * errors.
+	 *
+	 * Note: It has not been established yet if this is actually
+	 * necessary/useful for shutdown.
+	 */
+
+	status = ssam_notifier_disable_registered(c);
+	if (status) {
+		ssam_err(c, "pm: failed to disable notifiers for shutdown: %d\n",
+			 status);
+	}
+
+	status = ssam_ctrl_notif_display_off(c);
+	if (status)
+		ssam_err(c, "pm: display-off notification failed: %d\n", status);
+
+	status = ssam_ctrl_notif_d0_exit(c);
+	if (status)
+		ssam_err(c, "pm: D0-exit notification failed: %d\n", status);
+}
+
+#ifdef CONFIG_PM_SLEEP
+
+static int ssam_serial_hub_pm_prepare(struct device *dev)
+{
+	struct ssam_controller *c = dev_get_drvdata(dev);
+	int status;
+
+	/*
+	 * Try to signal display-off, This will quiesce events.
+	 *
+	 * Note: Signaling display-off/display-on should normally be done from
+	 * some sort of display state notifier. As that is not available,
+	 * signal it here.
+	 */
+
+	status = ssam_ctrl_notif_display_off(c);
+	if (status)
+		ssam_err(c, "pm: display-off notification failed: %d\n", status);
+
+	return status;
+}
+
+static void ssam_serial_hub_pm_complete(struct device *dev)
+{
+	struct ssam_controller *c = dev_get_drvdata(dev);
+	int status;
+
+	/*
+	 * Try to signal display-on. This will restore events.
+	 *
+	 * Note: Signaling display-off/display-on should normally be done from
+	 * some sort of display state notifier. As that is not available,
+	 * signal it here.
+	 */
+
+	status = ssam_ctrl_notif_display_on(c);
+	if (status)
+		ssam_err(c, "pm: display-on notification failed: %d\n", status);
+}
+
+static int ssam_serial_hub_pm_suspend(struct device *dev)
+{
+	struct ssam_controller *c = dev_get_drvdata(dev);
+	int status;
+
+	/*
+	 * Try to signal D0-exit, enable IRQ wakeup if specified. Abort on
+	 * error.
+	 */
+
+	status = ssam_ctrl_notif_d0_exit(c);
+	if (status) {
+		ssam_err(c, "pm: D0-exit notification failed: %d\n", status);
+		goto err_notif;
+	}
+
+	status = ssam_irq_arm_for_wakeup(c);
+	if (status)
+		goto err_irq;
+
+	WARN_ON(ssam_controller_suspend(c));
+	return 0;
+
+err_irq:
+	ssam_ctrl_notif_d0_entry(c);
+err_notif:
+	ssam_ctrl_notif_display_on(c);
+	return status;
+}
+
+static int ssam_serial_hub_pm_resume(struct device *dev)
+{
+	struct ssam_controller *c = dev_get_drvdata(dev);
+	int status;
+
+	WARN_ON(ssam_controller_resume(c));
+
+	/*
+	 * Try to disable IRQ wakeup (if specified) and signal D0-entry. In
+	 * case of errors, log them and try to restore normal operation state
+	 * as far as possible.
+	 *
+	 * Note: Signaling display-off/display-on should normally be done from
+	 * some sort of display state notifier. As that is not available,
+	 * signal it here.
+	 */
+
+	ssam_irq_disarm_wakeup(c);
+
+	status = ssam_ctrl_notif_d0_entry(c);
+	if (status)
+		ssam_err(c, "pm: D0-entry notification failed: %d\n", status);
+
+	return 0;
+}
+
+static int ssam_serial_hub_pm_freeze(struct device *dev)
+{
+	struct ssam_controller *c = dev_get_drvdata(dev);
+	int status;
+
+	/*
+	 * During hibernation image creation, we only have to ensure that the
+	 * EC doesn't send us any events. This is done via the display-off
+	 * and D0-exit notifications. Note that this sets up the wakeup IRQ
+	 * on the EC side, however, we have disabled it by default on our side
+	 * and won't enable it here.
+	 *
+	 * See ssam_serial_hub_poweroff() for more details on the hibernation
+	 * process.
+	 */
+
+	status = ssam_ctrl_notif_d0_exit(c);
+	if (status) {
+		ssam_err(c, "pm: D0-exit notification failed: %d\n", status);
+		ssam_ctrl_notif_display_on(c);
+		return status;
+	}
+
+	WARN_ON(ssam_controller_suspend(c));
+	return 0;
+}
+
+static int ssam_serial_hub_pm_thaw(struct device *dev)
+{
+	struct ssam_controller *c = dev_get_drvdata(dev);
+	int status;
+
+	WARN_ON(ssam_controller_resume(c));
+
+	status = ssam_ctrl_notif_d0_entry(c);
+	if (status)
+		ssam_err(c, "pm: D0-exit notification failed: %d\n", status);
+
+	return status;
+}
+
+static int ssam_serial_hub_pm_poweroff(struct device *dev)
+{
+	struct ssam_controller *c = dev_get_drvdata(dev);
+	int status;
+
+	/*
+	 * When entering hibernation and powering off the system, the EC, at
+	 * least on some models, may disable events. Without us taking care of
+	 * that, this leads to events not being enabled/restored when the
+	 * system resumes from hibernation, resulting SAM-HID subsystem devices
+	 * (i.e. keyboard, touchpad) not working, AC-plug/AC-unplug events being
+	 * gone, etc.
+	 *
+	 * To avoid these issues, we disable all registered events here (this is
+	 * likely not actually required) and restore them during the drivers PM
+	 * restore callback.
+	 *
+	 * Wakeup from the EC interrupt is not supported during hibernation,
+	 * so don't arm the IRQ here.
+	 */
+
+	status = ssam_notifier_disable_registered(c);
+	if (status) {
+		ssam_err(c, "pm: failed to disable notifiers for hibernation: %d\n",
+			 status);
+		return status;
+	}
+
+	status = ssam_ctrl_notif_d0_exit(c);
+	if (status) {
+		ssam_err(c, "pm: D0-exit notification failed: %d\n", status);
+		ssam_notifier_restore_registered(c);
+		return status;
+	}
+
+	WARN_ON(ssam_controller_suspend(c));
+	return 0;
+}
+
+static int ssam_serial_hub_pm_restore(struct device *dev)
+{
+	struct ssam_controller *c = dev_get_drvdata(dev);
+	int status;
+
+	/*
+	 * Ignore but log errors, try to restore state as much as possible in
+	 * case of failures. See ssam_serial_hub_poweroff() for more details on
+	 * the hibernation process.
+	 */
+
+	WARN_ON(ssam_controller_resume(c));
+
+	status = ssam_ctrl_notif_d0_entry(c);
+	if (status)
+		ssam_err(c, "pm: D0-entry notification failed: %d\n", status);
+
+	ssam_notifier_restore_registered(c);
+	return 0;
+}
+
+static const struct dev_pm_ops ssam_serial_hub_pm_ops = {
+	.prepare  = ssam_serial_hub_pm_prepare,
+	.complete = ssam_serial_hub_pm_complete,
+	.suspend  = ssam_serial_hub_pm_suspend,
+	.resume   = ssam_serial_hub_pm_resume,
+	.freeze   = ssam_serial_hub_pm_freeze,
+	.thaw     = ssam_serial_hub_pm_thaw,
+	.poweroff = ssam_serial_hub_pm_poweroff,
+	.restore  = ssam_serial_hub_pm_restore,
+};
+
+#else /* CONFIG_PM_SLEEP */
+
+static const struct dev_pm_ops ssam_serial_hub_pm_ops = { };
+
+#endif /* CONFIG_PM_SLEEP */
+
+
+/* -- Device/driver setup. -------------------------------------------------- */
+
+static const struct acpi_gpio_params gpio_ssam_wakeup_int = { 0, 0, false };
+static const struct acpi_gpio_params gpio_ssam_wakeup     = { 1, 0, false };
+
+static const struct acpi_gpio_mapping ssam_acpi_gpios[] = {
+	{ "ssam_wakeup-int-gpio", &gpio_ssam_wakeup_int, 1 },
+	{ "ssam_wakeup-gpio",     &gpio_ssam_wakeup,     1 },
+	{ },
+};
+
+static int ssam_serial_hub_probe(struct serdev_device *serdev)
+{
+	struct ssam_controller *ctrl;
+	acpi_handle *ssh = ACPI_HANDLE(&serdev->dev);
+	acpi_status astatus;
+	int status;
+
+	if (gpiod_count(&serdev->dev, NULL) < 0)
+		return -ENODEV;
+
+	status = devm_acpi_dev_add_driver_gpios(&serdev->dev, ssam_acpi_gpios);
+	if (status)
+		return status;
+
+	/* Allocate controller. */
+	ctrl = kzalloc(sizeof(*ctrl), GFP_KERNEL);
+	if (!ctrl)
+		return -ENOMEM;
+
+	/* Initialize controller. */
+	status = ssam_controller_init(ctrl, serdev);
+	if (status)
+		goto err_ctrl_init;
+
+	ssam_controller_lock(ctrl);
+
+	/* Set up serdev device. */
+	serdev_device_set_drvdata(serdev, ctrl);
+	serdev_device_set_client_ops(serdev, &ssam_serdev_ops);
+	status = serdev_device_open(serdev);
+	if (status)
+		goto err_devopen;
+
+	astatus = ssam_serdev_setup_via_acpi(ssh, serdev);
+	if (ACPI_FAILURE(astatus)) {
+		status = -ENXIO;
+		goto err_devinit;
+	}
+
+	/* Start controller. */
+	status = ssam_controller_start(ctrl);
+	if (status)
+		goto err_devinit;
+
+	ssam_controller_unlock(ctrl);
+
+	/*
+	 * Initial SAM requests: Log version and notify default/init power
+	 * states.
+	 */
+	status = ssam_log_firmware_version(ctrl);
+	if (status)
+		goto err_initrq;
+
+	status = ssam_ctrl_notif_d0_entry(ctrl);
+	if (status)
+		goto err_initrq;
+
+	status = ssam_ctrl_notif_display_on(ctrl);
+	if (status)
+		goto err_initrq;
+
+	status = sysfs_create_group(&serdev->dev.kobj, &ssam_sam_group);
+	if (status)
+		goto err_initrq;
+
+	/* Set up IRQ. */
+	status = ssam_irq_setup(ctrl);
+	if (status)
+		goto err_irq;
+
+	/* Finally, set main controller reference. */
+	status = ssam_try_set_controller(ctrl);
+	if (WARN_ON(status))	/* Currently, we're the only provider. */
+		goto err_mainref;
+
+	/*
+	 * TODO: The EC can wake up the system via the associated GPIO interrupt
+	 *       in multiple situations. One of which is the remaining battery
+	 *       capacity falling below a certain threshold. Normally, we should
+	 *       use the device_init_wakeup function, however, the EC also seems
+	 *       to have other reasons for waking up the system and it seems
+	 *       that Windows has additional checks whether the system should be
+	 *       resumed. In short, this causes some spurious unwanted wake-ups.
+	 *       For now let's thus default power/wakeup to false.
+	 */
+	device_set_wakeup_capable(&serdev->dev, true);
+	acpi_walk_dep_device_list(ssh);
+
+	return 0;
+
+err_mainref:
+	ssam_irq_free(ctrl);
+err_irq:
+	sysfs_remove_group(&serdev->dev.kobj, &ssam_sam_group);
+err_initrq:
+	ssam_controller_lock(ctrl);
+	ssam_controller_shutdown(ctrl);
+err_devinit:
+	serdev_device_close(serdev);
+err_devopen:
+	ssam_controller_destroy(ctrl);
+	ssam_controller_unlock(ctrl);
+err_ctrl_init:
+	kfree(ctrl);
+	return status;
+}
+
+static void ssam_serial_hub_remove(struct serdev_device *serdev)
+{
+	struct ssam_controller *ctrl = serdev_device_get_drvdata(serdev);
+	int status;
+
+	/* Clear static reference so that no one else can get a new one. */
+	ssam_clear_controller();
+
+	/* Disable and free IRQ. */
+	ssam_irq_free(ctrl);
+
+	sysfs_remove_group(&serdev->dev.kobj, &ssam_sam_group);
+	ssam_controller_lock(ctrl);
+
+	/* Remove all client devices. */
+	ssam_controller_remove_clients(ctrl);
+
+	/* Act as if suspending to silence events. */
+	status = ssam_ctrl_notif_display_off(ctrl);
+	if (status) {
+		dev_err(&serdev->dev, "display-off notification failed: %d\n",
+			status);
+	}
+
+	status = ssam_ctrl_notif_d0_exit(ctrl);
+	if (status) {
+		dev_err(&serdev->dev, "D0-exit notification failed: %d\n",
+			status);
+	}
+
+	/* Shut down controller and remove serdev device reference from it. */
+	ssam_controller_shutdown(ctrl);
+
+	/* Shut down actual transport. */
+	serdev_device_wait_until_sent(serdev, 0);
+	serdev_device_close(serdev);
+
+	/* Drop our controller reference. */
+	ssam_controller_unlock(ctrl);
+	ssam_controller_put(ctrl);
+
+	device_set_wakeup_capable(&serdev->dev, false);
+}
+
+static const struct acpi_device_id ssam_serial_hub_match[] = {
+	{ "MSHW0084", 0 },
+	{ },
+};
+MODULE_DEVICE_TABLE(acpi, ssam_serial_hub_match);
+
+static struct serdev_device_driver ssam_serial_hub = {
+	.probe = ssam_serial_hub_probe,
+	.remove = ssam_serial_hub_remove,
+	.driver = {
+		.name = "surface_serial_hub",
+		.acpi_match_table = ssam_serial_hub_match,
+		.pm = &ssam_serial_hub_pm_ops,
+		.shutdown = ssam_serial_hub_shutdown,
+		.probe_type = PROBE_PREFER_ASYNCHRONOUS,
+	},
+};
+
+
+/* -- Module setup. --------------------------------------------------------- */
+
+static int __init ssam_core_init(void)
+{
+	int status;
+
+	status = ssam_bus_register();
+	if (status)
+		goto err_bus;
+
+	status = ssh_ctrl_packet_cache_init();
+	if (status)
+		goto err_cpkg;
+
+	status = ssam_event_item_cache_init();
+	if (status)
+		goto err_evitem;
+
+	status = serdev_device_driver_register(&ssam_serial_hub);
+	if (status)
+		goto err_register;
+
+	return 0;
+
+err_register:
+	ssam_event_item_cache_destroy();
+err_evitem:
+	ssh_ctrl_packet_cache_destroy();
+err_cpkg:
+	ssam_bus_unregister();
+err_bus:
+	return status;
+}
+module_init(ssam_core_init);
+
+static void __exit ssam_core_exit(void)
+{
+	serdev_device_driver_unregister(&ssam_serial_hub);
+	ssam_event_item_cache_destroy();
+	ssh_ctrl_packet_cache_destroy();
+	ssam_bus_unregister();
+}
+module_exit(ssam_core_exit);
+
+MODULE_AUTHOR("Maximilian Luz <luzmaximilian@gmail.com>");
+MODULE_DESCRIPTION("Subsystem and Surface Serial Hub driver for Surface System Aggregator Module");
+MODULE_LICENSE("GPL");
diff --git a/drivers/platform/surface/aggregator/ssh_msgb.h b/drivers/platform/surface/aggregator/ssh_msgb.h
new file mode 100644
index 000000000000..1221f642dda1
--- /dev/null
+++ b/drivers/platform/surface/aggregator/ssh_msgb.h
@@ -0,0 +1,205 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * SSH message builder functions.
+ *
+ * Copyright (C) 2019-2020 Maximilian Luz <luzmaximilian@gmail.com>
+ */
+
+#ifndef _SURFACE_AGGREGATOR_SSH_MSGB_H
+#define _SURFACE_AGGREGATOR_SSH_MSGB_H
+
+#include <asm/unaligned.h>
+#include <linux/types.h>
+
+#include <linux/surface_aggregator/controller.h>
+#include <linux/surface_aggregator/serial_hub.h>
+
+/**
+ * struct msgbuf - Buffer struct to construct SSH messages.
+ * @begin: Pointer to the beginning of the allocated buffer space.
+ * @end:   Pointer to the end (one past last element) of the allocated buffer
+ *         space.
+ * @ptr:   Pointer to the first free element in the buffer.
+ */
+struct msgbuf {
+	u8 *begin;
+	u8 *end;
+	u8 *ptr;
+};
+
+/**
+ * msgb_init() - Initialize the given message buffer struct.
+ * @msgb: The buffer struct to initialize
+ * @ptr:  Pointer to the underlying memory by which the buffer will be backed.
+ * @cap:  Size of the underlying memory.
+ *
+ * Initialize the given message buffer struct using the provided memory as
+ * backing.
+ */
+static inline void msgb_init(struct msgbuf *msgb, u8 *ptr, size_t cap)
+{
+	msgb->begin = ptr;
+	msgb->end = ptr + cap;
+	msgb->ptr = ptr;
+}
+
+/**
+ * msgb_bytes_used() - Return the current number of bytes used in the buffer.
+ * @msgb: The message buffer.
+ */
+static inline size_t msgb_bytes_used(const struct msgbuf *msgb)
+{
+	return msgb->ptr - msgb->begin;
+}
+
+static inline void __msgb_push_u8(struct msgbuf *msgb, u8 value)
+{
+	*msgb->ptr = value;
+	msgb->ptr += sizeof(u8);
+}
+
+static inline void __msgb_push_u16(struct msgbuf *msgb, u16 value)
+{
+	put_unaligned_le16(value, msgb->ptr);
+	msgb->ptr += sizeof(u16);
+}
+
+/**
+ * msgb_push_u16() - Push a u16 value to the buffer.
+ * @msgb:  The message buffer.
+ * @value: The value to push to the buffer.
+ */
+static inline void msgb_push_u16(struct msgbuf *msgb, u16 value)
+{
+	if (WARN_ON(msgb->ptr + sizeof(u16) > msgb->end))
+		return;
+
+	__msgb_push_u16(msgb, value);
+}
+
+/**
+ * msgb_push_syn() - Push SSH SYN bytes to the buffer.
+ * @msgb: The message buffer.
+ */
+static inline void msgb_push_syn(struct msgbuf *msgb)
+{
+	msgb_push_u16(msgb, SSH_MSG_SYN);
+}
+
+/**
+ * msgb_push_buf() - Push raw data to the buffer.
+ * @msgb: The message buffer.
+ * @buf:  The data to push to the buffer.
+ * @len:  The length of the data to push to the buffer.
+ */
+static inline void msgb_push_buf(struct msgbuf *msgb, const u8 *buf, size_t len)
+{
+	msgb->ptr = memcpy(msgb->ptr, buf, len) + len;
+}
+
+/**
+ * msgb_push_crc() - Compute CRC and push it to the buffer.
+ * @msgb: The message buffer.
+ * @buf:  The data for which the CRC should be computed.
+ * @len:  The length of the data for which the CRC should be computed.
+ */
+static inline void msgb_push_crc(struct msgbuf *msgb, const u8 *buf, size_t len)
+{
+	msgb_push_u16(msgb, ssh_crc(buf, len));
+}
+
+/**
+ * msgb_push_frame() - Push a SSH message frame header to the buffer.
+ * @msgb: The message buffer
+ * @ty:   The type of the frame.
+ * @len:  The length of the payload of the frame.
+ * @seq:  The sequence ID of the frame/packet.
+ */
+static inline void msgb_push_frame(struct msgbuf *msgb, u8 ty, u16 len, u8 seq)
+{
+	u8 *const begin = msgb->ptr;
+
+	if (WARN_ON(msgb->ptr + sizeof(struct ssh_frame) > msgb->end))
+		return;
+
+	__msgb_push_u8(msgb, ty);	/* Frame type. */
+	__msgb_push_u16(msgb, len);	/* Frame payload length. */
+	__msgb_push_u8(msgb, seq);	/* Frame sequence ID. */
+
+	msgb_push_crc(msgb, begin, msgb->ptr - begin);
+}
+
+/**
+ * msgb_push_ack() - Push a SSH ACK frame to the buffer.
+ * @msgb: The message buffer
+ * @seq:  The sequence ID of the frame/packet to be ACKed.
+ */
+static inline void msgb_push_ack(struct msgbuf *msgb, u8 seq)
+{
+	/* SYN. */
+	msgb_push_syn(msgb);
+
+	/* ACK-type frame + CRC. */
+	msgb_push_frame(msgb, SSH_FRAME_TYPE_ACK, 0x00, seq);
+
+	/* Payload CRC (ACK-type frames do not have a payload). */
+	msgb_push_crc(msgb, msgb->ptr, 0);
+}
+
+/**
+ * msgb_push_nak() - Push a SSH NAK frame to the buffer.
+ * @msgb: The message buffer
+ */
+static inline void msgb_push_nak(struct msgbuf *msgb)
+{
+	/* SYN. */
+	msgb_push_syn(msgb);
+
+	/* NAK-type frame + CRC. */
+	msgb_push_frame(msgb, SSH_FRAME_TYPE_NAK, 0x00, 0x00);
+
+	/* Payload CRC (ACK-type frames do not have a payload). */
+	msgb_push_crc(msgb, msgb->ptr, 0);
+}
+
+/**
+ * msgb_push_cmd() - Push a SSH command frame with payload to the buffer.
+ * @msgb: The message buffer.
+ * @seq:  The sequence ID (SEQ) of the frame/packet.
+ * @rqid: The request ID (RQID) of the request contained in the frame.
+ * @rqst: The request to wrap in the frame.
+ */
+static inline void msgb_push_cmd(struct msgbuf *msgb, u8 seq, u16 rqid,
+				 const struct ssam_request *rqst)
+{
+	const u8 type = SSH_FRAME_TYPE_DATA_SEQ;
+	u8 *cmd;
+
+	/* SYN. */
+	msgb_push_syn(msgb);
+
+	/* Command frame + CRC. */
+	msgb_push_frame(msgb, type, sizeof(struct ssh_command) + rqst->length, seq);
+
+	/* Frame payload: Command struct + payload. */
+	if (WARN_ON(msgb->ptr + sizeof(struct ssh_command) > msgb->end))
+		return;
+
+	cmd = msgb->ptr;
+
+	__msgb_push_u8(msgb, SSH_PLD_TYPE_CMD);		/* Payload type. */
+	__msgb_push_u8(msgb, rqst->target_category);	/* Target category. */
+	__msgb_push_u8(msgb, rqst->target_id);		/* Target ID (out). */
+	__msgb_push_u8(msgb, 0x00);			/* Target ID (in). */
+	__msgb_push_u8(msgb, rqst->instance_id);	/* Instance ID. */
+	__msgb_push_u16(msgb, rqid);			/* Request ID. */
+	__msgb_push_u8(msgb, rqst->command_id);		/* Command ID. */
+
+	/* Command payload. */
+	msgb_push_buf(msgb, rqst->payload, rqst->length);
+
+	/* CRC for command struct + payload. */
+	msgb_push_crc(msgb, cmd, msgb->ptr - cmd);
+}
+
+#endif /* _SURFACE_AGGREGATOR_SSH_MSGB_H */
diff --git a/drivers/platform/surface/aggregator/ssh_packet_layer.c b/drivers/platform/surface/aggregator/ssh_packet_layer.c
new file mode 100644
index 000000000000..15d96eac6811
--- /dev/null
+++ b/drivers/platform/surface/aggregator/ssh_packet_layer.c
@@ -0,0 +1,2074 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * SSH packet transport layer.
+ *
+ * Copyright (C) 2019-2020 Maximilian Luz <luzmaximilian@gmail.com>
+ */
+
+#include <asm/unaligned.h>
+#include <linux/atomic.h>
+#include <linux/error-injection.h>
+#include <linux/jiffies.h>
+#include <linux/kfifo.h>
+#include <linux/kref.h>
+#include <linux/kthread.h>
+#include <linux/ktime.h>
+#include <linux/limits.h>
+#include <linux/list.h>
+#include <linux/lockdep.h>
+#include <linux/serdev.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+#include <linux/workqueue.h>
+
+#include <linux/surface_aggregator/serial_hub.h>
+
+#include "ssh_msgb.h"
+#include "ssh_packet_layer.h"
+#include "ssh_parser.h"
+
+#include "trace.h"
+
+/*
+ * To simplify reasoning about the code below, we define a few concepts. The
+ * system below is similar to a state-machine for packets, however, there are
+ * too many states to explicitly write them down. To (somewhat) manage the
+ * states and packets we rely on flags, reference counting, and some simple
+ * concepts. State transitions are triggered by actions.
+ *
+ * >> Actions <<
+ *
+ * - submit
+ * - transmission start (process next item in queue)
+ * - transmission finished (guaranteed to never be parallel to transmission
+ *   start)
+ * - ACK received
+ * - NAK received (this is equivalent to issuing re-submit for all pending
+ *   packets)
+ * - timeout (this is equivalent to re-issuing a submit or canceling)
+ * - cancel (non-pending and pending)
+ *
+ * >> Data Structures, Packet Ownership, General Overview <<
+ *
+ * The code below employs two main data structures: The packet queue,
+ * containing all packets scheduled for transmission, and the set of pending
+ * packets, containing all packets awaiting an ACK.
+ *
+ * Shared ownership of a packet is controlled via reference counting. Inside
+ * the transport system are a total of five packet owners:
+ *
+ * - the packet queue,
+ * - the pending set,
+ * - the transmitter thread,
+ * - the receiver thread (via ACKing), and
+ * - the timeout work item.
+ *
+ * Normal operation is as follows: The initial reference of the packet is
+ * obtained by submitting the packet and queuing it. The receiver thread takes
+ * packets from the queue. By doing this, it does not increment the refcount
+ * but takes over the reference (removing it from the queue). If the packet is
+ * sequenced (i.e. needs to be ACKed by the client), the transmitter thread
+ * sets-up the timeout and adds the packet to the pending set before starting
+ * to transmit it. As the timeout is handled by a reaper task, no additional
+ * reference for it is needed. After the transmit is done, the reference held
+ * by the transmitter thread is dropped. If the packet is unsequenced (i.e.
+ * does not need an ACK), the packet is completed by the transmitter thread
+ * before dropping that reference.
+ *
+ * On receival of an ACK, the receiver thread removes and obtains the
+ * reference to the packet from the pending set. The receiver thread will then
+ * complete the packet and drop its reference.
+ *
+ * On receival of a NAK, the receiver thread re-submits all currently pending
+ * packets.
+ *
+ * Packet timeouts are detected by the timeout reaper. This is a task,
+ * scheduled depending on the earliest packet timeout expiration date,
+ * checking all currently pending packets if their timeout has expired. If the
+ * timeout of a packet has expired, it is re-submitted and the number of tries
+ * of this packet is incremented. If this number reaches its limit, the packet
+ * will be completed with a failure.
+ *
+ * On transmission failure (such as repeated packet timeouts), the completion
+ * callback is immediately run by on thread on which the error was detected.
+ *
+ * To ensure that a packet eventually leaves the system it is marked as
+ * "locked" directly before it is going to be completed or when it is
+ * canceled. Marking a packet as "locked" has the effect that passing and
+ * creating new references of the packet is disallowed. This means that the
+ * packet cannot be added to the queue, the pending set, and the timeout, or
+ * be picked up by the transmitter thread or receiver thread. To remove a
+ * packet from the system it has to be marked as locked and subsequently all
+ * references from the data structures (queue, pending) have to be removed.
+ * References held by threads will eventually be dropped automatically as
+ * their execution progresses.
+ *
+ * Note that the packet completion callback is, in case of success and for a
+ * sequenced packet, guaranteed to run on the receiver thread, thus providing
+ * a way to reliably identify responses to the packet. The packet completion
+ * callback is only run once and it does not indicate that the packet has
+ * fully left the system (for this, one should rely on the release method,
+ * triggered when the reference count of the packet reaches zero). In case of
+ * re-submission (and with somewhat unlikely timing), it may be possible that
+ * the packet is being re-transmitted while the completion callback runs.
+ * Completion will occur both on success and internal error, as well as when
+ * the packet is canceled.
+ *
+ * >> Flags <<
+ *
+ * Flags are used to indicate the state and progression of a packet. Some flags
+ * have stricter guarantees than other:
+ *
+ * - locked
+ *   Indicates if the packet is locked. If the packet is locked, passing and/or
+ *   creating additional references to the packet is forbidden. The packet thus
+ *   may not be queued, dequeued, or removed or added to the pending set. Note
+ *   that the packet state flags may still change (e.g. it may be marked as
+ *   ACKed, transmitted, ...).
+ *
+ * - completed
+ *   Indicates if the packet completion callback has been executed or is about
+ *   to be executed. This flag is used to ensure that the packet completion
+ *   callback is only run once.
+ *
+ * - queued
+ *   Indicates if a packet is present in the submission queue or not. This flag
+ *   must only be modified with the queue lock held, and must be coherent to the
+ *   presence of the packet in the queue.
+ *
+ * - pending
+ *   Indicates if a packet is present in the set of pending packets or not.
+ *   This flag must only be modified with the pending lock held, and must be
+ *   coherent to the presence of the packet in the pending set.
+ *
+ * - transmitting
+ *   Indicates if the packet is currently transmitting. In case of
+ *   re-transmissions, it is only safe to wait on the "transmitted" completion
+ *   after this flag has been set. The completion will be set both in success
+ *   and error case.
+ *
+ * - transmitted
+ *   Indicates if the packet has been transmitted. This flag is not cleared by
+ *   the system, thus it indicates the first transmission only.
+ *
+ * - acked
+ *   Indicates if the packet has been acknowledged by the client. There are no
+ *   other guarantees given. For example, the packet may still be canceled
+ *   and/or the completion may be triggered an error even though this bit is
+ *   set. Rely on the status provided to the completion callback instead.
+ *
+ * - canceled
+ *   Indicates if the packet has been canceled from the outside. There are no
+ *   other guarantees given. Specifically, the packet may be completed by
+ *   another part of the system before the cancellation attempts to complete it.
+ *
+ * >> General Notes <<
+ *
+ * - To avoid deadlocks, if both queue and pending locks are required, the
+ *   pending lock must be acquired before the queue lock.
+ *
+ * - The packet priority must be accessed only while holding the queue lock.
+ *
+ * - The packet timestamp must be accessed only while holding the pending
+ *   lock.
+ */
+
+/*
+ * SSH_PTL_MAX_PACKET_TRIES - Maximum transmission attempts for packet.
+ *
+ * Maximum number of transmission attempts per sequenced packet in case of
+ * time-outs. Must be smaller than 16. If the packet times out after this
+ * amount of tries, the packet will be completed with %-ETIMEDOUT as status
+ * code.
+ */
+#define SSH_PTL_MAX_PACKET_TRIES		3
+
+/*
+ * SSH_PTL_TX_TIMEOUT - Packet transmission timeout.
+ *
+ * Timeout in jiffies for packet transmission via the underlying serial
+ * device. If transmitting the packet takes longer than this timeout, the
+ * packet will be completed with -ETIMEDOUT. It will not be re-submitted.
+ */
+#define SSH_PTL_TX_TIMEOUT			HZ
+
+/*
+ * SSH_PTL_PACKET_TIMEOUT - Packet response timeout.
+ *
+ * Timeout as ktime_t delta for ACKs. If we have not received an ACK in this
+ * time-frame after starting transmission, the packet will be re-submitted.
+ */
+#define SSH_PTL_PACKET_TIMEOUT			ms_to_ktime(1000)
+
+/*
+ * SSH_PTL_PACKET_TIMEOUT_RESOLUTION - Packet timeout granularity.
+ *
+ * Time-resolution for timeouts. Should be larger than one jiffy to avoid
+ * direct re-scheduling of reaper work_struct.
+ */
+#define SSH_PTL_PACKET_TIMEOUT_RESOLUTION	ms_to_ktime(max(2000 / HZ, 50))
+
+/*
+ * SSH_PTL_MAX_PENDING - Maximum number of pending packets.
+ *
+ * Maximum number of sequenced packets concurrently waiting for an ACK.
+ * Packets marked as blocking will not be transmitted while this limit is
+ * reached.
+ */
+#define SSH_PTL_MAX_PENDING			1
+
+/*
+ * SSH_PTL_RX_BUF_LEN - Evaluation-buffer size in bytes.
+ */
+#define SSH_PTL_RX_BUF_LEN			4096
+
+/*
+ * SSH_PTL_RX_FIFO_LEN - Fifo input-buffer size in bytes.
+ */
+#define SSH_PTL_RX_FIFO_LEN			4096
+
+#ifdef CONFIG_SURFACE_AGGREGATOR_ERROR_INJECTION
+
+/**
+ * ssh_ptl_should_drop_ack_packet() - Error injection hook to drop ACK packets.
+ *
+ * Useful to test detection and handling of automated re-transmits by the EC.
+ * Specifically of packets that the EC considers not-ACKed but the driver
+ * already considers ACKed (due to dropped ACK). In this case, the EC
+ * re-transmits the packet-to-be-ACKed and the driver should detect it as
+ * duplicate/already handled. Note that the driver should still send an ACK
+ * for the re-transmitted packet.
+ */
+static noinline bool ssh_ptl_should_drop_ack_packet(void)
+{
+	return false;
+}
+ALLOW_ERROR_INJECTION(ssh_ptl_should_drop_ack_packet, TRUE);
+
+/**
+ * ssh_ptl_should_drop_nak_packet() - Error injection hook to drop NAK packets.
+ *
+ * Useful to test/force automated (timeout-based) re-transmit by the EC.
+ * Specifically, packets that have not reached the driver completely/with valid
+ * checksums. Only useful in combination with receival of (injected) bad data.
+ */
+static noinline bool ssh_ptl_should_drop_nak_packet(void)
+{
+	return false;
+}
+ALLOW_ERROR_INJECTION(ssh_ptl_should_drop_nak_packet, TRUE);
+
+/**
+ * ssh_ptl_should_drop_dsq_packet() - Error injection hook to drop sequenced
+ * data packet.
+ *
+ * Useful to test re-transmit timeout of the driver. If the data packet has not
+ * been ACKed after a certain time, the driver should re-transmit the packet up
+ * to limited number of times defined in SSH_PTL_MAX_PACKET_TRIES.
+ */
+static noinline bool ssh_ptl_should_drop_dsq_packet(void)
+{
+	return false;
+}
+ALLOW_ERROR_INJECTION(ssh_ptl_should_drop_dsq_packet, TRUE);
+
+/**
+ * ssh_ptl_should_fail_write() - Error injection hook to make
+ * serdev_device_write() fail.
+ *
+ * Hook to simulate errors in serdev_device_write when transmitting packets.
+ */
+static noinline int ssh_ptl_should_fail_write(void)
+{
+	return 0;
+}
+ALLOW_ERROR_INJECTION(ssh_ptl_should_fail_write, ERRNO);
+
+/**
+ * ssh_ptl_should_corrupt_tx_data() - Error injection hook to simulate invalid
+ * data being sent to the EC.
+ *
+ * Hook to simulate corrupt/invalid data being sent from host (driver) to EC.
+ * Causes the packet data to be actively corrupted by overwriting it with
+ * pre-defined values, such that it becomes invalid, causing the EC to respond
+ * with a NAK packet. Useful to test handling of NAK packets received by the
+ * driver.
+ */
+static noinline bool ssh_ptl_should_corrupt_tx_data(void)
+{
+	return false;
+}
+ALLOW_ERROR_INJECTION(ssh_ptl_should_corrupt_tx_data, TRUE);
+
+/**
+ * ssh_ptl_should_corrupt_rx_syn() - Error injection hook to simulate invalid
+ * data being sent by the EC.
+ *
+ * Hook to simulate invalid SYN bytes, i.e. an invalid start of messages and
+ * test handling thereof in the driver.
+ */
+static noinline bool ssh_ptl_should_corrupt_rx_syn(void)
+{
+	return false;
+}
+ALLOW_ERROR_INJECTION(ssh_ptl_should_corrupt_rx_syn, TRUE);
+
+/**
+ * ssh_ptl_should_corrupt_rx_data() - Error injection hook to simulate invalid
+ * data being sent by the EC.
+ *
+ * Hook to simulate invalid data/checksum of the message frame and test handling
+ * thereof in the driver.
+ */
+static noinline bool ssh_ptl_should_corrupt_rx_data(void)
+{
+	return false;
+}
+ALLOW_ERROR_INJECTION(ssh_ptl_should_corrupt_rx_data, TRUE);
+
+static bool __ssh_ptl_should_drop_ack_packet(struct ssh_packet *packet)
+{
+	if (likely(!ssh_ptl_should_drop_ack_packet()))
+		return false;
+
+	trace_ssam_ei_tx_drop_ack_packet(packet);
+	ptl_info(packet->ptl, "packet error injection: dropping ACK packet %p\n",
+		 packet);
+
+	return true;
+}
+
+static bool __ssh_ptl_should_drop_nak_packet(struct ssh_packet *packet)
+{
+	if (likely(!ssh_ptl_should_drop_nak_packet()))
+		return false;
+
+	trace_ssam_ei_tx_drop_nak_packet(packet);
+	ptl_info(packet->ptl, "packet error injection: dropping NAK packet %p\n",
+		 packet);
+
+	return true;
+}
+
+static bool __ssh_ptl_should_drop_dsq_packet(struct ssh_packet *packet)
+{
+	if (likely(!ssh_ptl_should_drop_dsq_packet()))
+		return false;
+
+	trace_ssam_ei_tx_drop_dsq_packet(packet);
+	ptl_info(packet->ptl,
+		 "packet error injection: dropping sequenced data packet %p\n",
+		 packet);
+
+	return true;
+}
+
+static bool ssh_ptl_should_drop_packet(struct ssh_packet *packet)
+{
+	/* Ignore packets that don't carry any data (i.e. flush). */
+	if (!packet->data.ptr || !packet->data.len)
+		return false;
+
+	switch (packet->data.ptr[SSH_MSGOFFSET_FRAME(type)]) {
+	case SSH_FRAME_TYPE_ACK:
+		return __ssh_ptl_should_drop_ack_packet(packet);
+
+	case SSH_FRAME_TYPE_NAK:
+		return __ssh_ptl_should_drop_nak_packet(packet);
+
+	case SSH_FRAME_TYPE_DATA_SEQ:
+		return __ssh_ptl_should_drop_dsq_packet(packet);
+
+	default:
+		return false;
+	}
+}
+
+static int ssh_ptl_write_buf(struct ssh_ptl *ptl, struct ssh_packet *packet,
+			     const unsigned char *buf, size_t count)
+{
+	int status;
+
+	status = ssh_ptl_should_fail_write();
+	if (unlikely(status)) {
+		trace_ssam_ei_tx_fail_write(packet, status);
+		ptl_info(packet->ptl,
+			 "packet error injection: simulating transmit error %d, packet %p\n",
+			 status, packet);
+
+		return status;
+	}
+
+	return serdev_device_write_buf(ptl->serdev, buf, count);
+}
+
+static void ssh_ptl_tx_inject_invalid_data(struct ssh_packet *packet)
+{
+	/* Ignore packets that don't carry any data (i.e. flush). */
+	if (!packet->data.ptr || !packet->data.len)
+		return;
+
+	/* Only allow sequenced data packets to be modified. */
+	if (packet->data.ptr[SSH_MSGOFFSET_FRAME(type)] != SSH_FRAME_TYPE_DATA_SEQ)
+		return;
+
+	if (likely(!ssh_ptl_should_corrupt_tx_data()))
+		return;
+
+	trace_ssam_ei_tx_corrupt_data(packet);
+	ptl_info(packet->ptl,
+		 "packet error injection: simulating invalid transmit data on packet %p\n",
+		 packet);
+
+	/*
+	 * NB: The value 0xb3 has been chosen more or less randomly so that it
+	 * doesn't have any (major) overlap with the SYN bytes (aa 55) and is
+	 * non-trivial (i.e. non-zero, non-0xff).
+	 */
+	memset(packet->data.ptr, 0xb3, packet->data.len);
+}
+
+static void ssh_ptl_rx_inject_invalid_syn(struct ssh_ptl *ptl,
+					  struct ssam_span *data)
+{
+	struct ssam_span frame;
+
+	/* Check if there actually is something to corrupt. */
+	if (!sshp_find_syn(data, &frame))
+		return;
+
+	if (likely(!ssh_ptl_should_corrupt_rx_syn()))
+		return;
+
+	trace_ssam_ei_rx_corrupt_syn(data->len);
+
+	data->ptr[1] = 0xb3;	/* Set second byte of SYN to "random" value. */
+}
+
+static void ssh_ptl_rx_inject_invalid_data(struct ssh_ptl *ptl,
+					   struct ssam_span *frame)
+{
+	size_t payload_len, message_len;
+	struct ssh_frame *sshf;
+
+	/* Ignore incomplete messages, will get handled once it's complete. */
+	if (frame->len < SSH_MESSAGE_LENGTH(0))
+		return;
+
+	/* Ignore incomplete messages, part 2. */
+	payload_len = get_unaligned_le16(&frame->ptr[SSH_MSGOFFSET_FRAME(len)]);
+	message_len = SSH_MESSAGE_LENGTH(payload_len);
+	if (frame->len < message_len)
+		return;
+
+	if (likely(!ssh_ptl_should_corrupt_rx_data()))
+		return;
+
+	sshf = (struct ssh_frame *)&frame->ptr[SSH_MSGOFFSET_FRAME(type)];
+	trace_ssam_ei_rx_corrupt_data(sshf);
+
+	/*
+	 * Flip bits in first byte of payload checksum. This is basically
+	 * equivalent to a payload/frame data error without us having to worry
+	 * about (the, arguably pretty small, probability of) accidental
+	 * checksum collisions.
+	 */
+	frame->ptr[frame->len - 2] = ~frame->ptr[frame->len - 2];
+}
+
+#else /* CONFIG_SURFACE_AGGREGATOR_ERROR_INJECTION */
+
+static inline bool ssh_ptl_should_drop_packet(struct ssh_packet *packet)
+{
+	return false;
+}
+
+static inline int ssh_ptl_write_buf(struct ssh_ptl *ptl,
+				    struct ssh_packet *packet,
+				    const unsigned char *buf,
+				    size_t count)
+{
+	return serdev_device_write_buf(ptl->serdev, buf, count);
+}
+
+static inline void ssh_ptl_tx_inject_invalid_data(struct ssh_packet *packet)
+{
+}
+
+static inline void ssh_ptl_rx_inject_invalid_syn(struct ssh_ptl *ptl,
+						 struct ssam_span *data)
+{
+}
+
+static inline void ssh_ptl_rx_inject_invalid_data(struct ssh_ptl *ptl,
+						  struct ssam_span *frame)
+{
+}
+
+#endif /* CONFIG_SURFACE_AGGREGATOR_ERROR_INJECTION */
+
+static void __ssh_ptl_packet_release(struct kref *kref)
+{
+	struct ssh_packet *p = container_of(kref, struct ssh_packet, refcnt);
+
+	trace_ssam_packet_release(p);
+
+	ptl_dbg_cond(p->ptl, "ptl: releasing packet %p\n", p);
+	p->ops->release(p);
+}
+
+/**
+ * ssh_packet_get() - Increment reference count of packet.
+ * @packet: The packet to increment the reference count of.
+ *
+ * Increments the reference count of the given packet. See ssh_packet_put()
+ * for the counter-part of this function.
+ *
+ * Return: Returns the packet provided as input.
+ */
+struct ssh_packet *ssh_packet_get(struct ssh_packet *packet)
+{
+	if (packet)
+		kref_get(&packet->refcnt);
+	return packet;
+}
+EXPORT_SYMBOL_GPL(ssh_packet_get);
+
+/**
+ * ssh_packet_put() - Decrement reference count of packet.
+ * @packet: The packet to decrement the reference count of.
+ *
+ * If the reference count reaches zero, the ``release`` callback specified in
+ * the packet's &struct ssh_packet_ops, i.e. ``packet->ops->release``, will be
+ * called.
+ *
+ * See ssh_packet_get() for the counter-part of this function.
+ */
+void ssh_packet_put(struct ssh_packet *packet)
+{
+	if (packet)
+		kref_put(&packet->refcnt, __ssh_ptl_packet_release);
+}
+EXPORT_SYMBOL_GPL(ssh_packet_put);
+
+static u8 ssh_packet_get_seq(struct ssh_packet *packet)
+{
+	return packet->data.ptr[SSH_MSGOFFSET_FRAME(seq)];
+}
+
+/**
+ * ssh_packet_init() - Initialize SSH packet.
+ * @packet:   The packet to initialize.
+ * @type:     Type-flags of the packet.
+ * @priority: Priority of the packet. See SSH_PACKET_PRIORITY() for details.
+ * @ops:      Packet operations.
+ *
+ * Initializes the given SSH packet. Sets the transmission buffer pointer to
+ * %NULL and the transmission buffer length to zero. For data-type packets,
+ * this buffer has to be set separately via ssh_packet_set_data() before
+ * submission, and must contain a valid SSH message, i.e. frame with optional
+ * payload of any type.
+ */
+void ssh_packet_init(struct ssh_packet *packet, unsigned long type,
+		     u8 priority, const struct ssh_packet_ops *ops)
+{
+	kref_init(&packet->refcnt);
+
+	packet->ptl = NULL;
+	INIT_LIST_HEAD(&packet->queue_node);
+	INIT_LIST_HEAD(&packet->pending_node);
+
+	packet->state = type & SSH_PACKET_FLAGS_TY_MASK;
+	packet->priority = priority;
+	packet->timestamp = KTIME_MAX;
+
+	packet->data.ptr = NULL;
+	packet->data.len = 0;
+
+	packet->ops = ops;
+}
+
+static struct kmem_cache *ssh_ctrl_packet_cache;
+
+/**
+ * ssh_ctrl_packet_cache_init() - Initialize the control packet cache.
+ */
+int ssh_ctrl_packet_cache_init(void)
+{
+	const unsigned int size = sizeof(struct ssh_packet) + SSH_MSG_LEN_CTRL;
+	const unsigned int align = __alignof__(struct ssh_packet);
+	struct kmem_cache *cache;
+
+	cache = kmem_cache_create("ssam_ctrl_packet", size, align, 0, NULL);
+	if (!cache)
+		return -ENOMEM;
+
+	ssh_ctrl_packet_cache = cache;
+	return 0;
+}
+
+/**
+ * ssh_ctrl_packet_cache_destroy() - Deinitialize the control packet cache.
+ */
+void ssh_ctrl_packet_cache_destroy(void)
+{
+	kmem_cache_destroy(ssh_ctrl_packet_cache);
+	ssh_ctrl_packet_cache = NULL;
+}
+
+/**
+ * ssh_ctrl_packet_alloc() - Allocate packet from control packet cache.
+ * @packet: Where the pointer to the newly allocated packet should be stored.
+ * @buffer: The buffer corresponding to this packet.
+ * @flags:  Flags used for allocation.
+ *
+ * Allocates a packet and corresponding transport buffer from the control
+ * packet cache. Sets the packet's buffer reference to the allocated buffer.
+ * The packet must be freed via ssh_ctrl_packet_free(), which will also free
+ * the corresponding buffer. The corresponding buffer must not be freed
+ * separately. Intended to be used with %ssh_ptl_ctrl_packet_ops as packet
+ * operations.
+ *
+ * Return: Returns zero on success, %-ENOMEM if the allocation failed.
+ */
+static int ssh_ctrl_packet_alloc(struct ssh_packet **packet,
+				 struct ssam_span *buffer, gfp_t flags)
+{
+	*packet = kmem_cache_alloc(ssh_ctrl_packet_cache, flags);
+	if (!*packet)
+		return -ENOMEM;
+
+	buffer->ptr = (u8 *)(*packet + 1);
+	buffer->len = SSH_MSG_LEN_CTRL;
+
+	trace_ssam_ctrl_packet_alloc(*packet, buffer->len);
+	return 0;
+}
+
+/**
+ * ssh_ctrl_packet_free() - Free packet allocated from control packet cache.
+ * @p: The packet to free.
+ */
+static void ssh_ctrl_packet_free(struct ssh_packet *p)
+{
+	trace_ssam_ctrl_packet_free(p);
+	kmem_cache_free(ssh_ctrl_packet_cache, p);
+}
+
+static const struct ssh_packet_ops ssh_ptl_ctrl_packet_ops = {
+	.complete = NULL,
+	.release = ssh_ctrl_packet_free,
+};
+
+static void ssh_ptl_timeout_reaper_mod(struct ssh_ptl *ptl, ktime_t now,
+				       ktime_t expires)
+{
+	unsigned long delta = msecs_to_jiffies(ktime_ms_delta(expires, now));
+	ktime_t aexp = ktime_add(expires, SSH_PTL_PACKET_TIMEOUT_RESOLUTION);
+
+	spin_lock(&ptl->rtx_timeout.lock);
+
+	/* Re-adjust / schedule reaper only if it is above resolution delta. */
+	if (ktime_before(aexp, ptl->rtx_timeout.expires)) {
+		ptl->rtx_timeout.expires = expires;
+		mod_delayed_work(system_wq, &ptl->rtx_timeout.reaper, delta);
+	}
+
+	spin_unlock(&ptl->rtx_timeout.lock);
+}
+
+/* Must be called with queue lock held. */
+static void ssh_packet_next_try(struct ssh_packet *p)
+{
+	u8 base = ssh_packet_priority_get_base(p->priority);
+	u8 try = ssh_packet_priority_get_try(p->priority);
+
+	lockdep_assert_held(&p->ptl->queue.lock);
+
+	/*
+	 * Ensure that we write the priority in one go via WRITE_ONCE() so we
+	 * can access it via READ_ONCE() for tracing. Note that other access
+	 * is guarded by the queue lock, so no need to use READ_ONCE() there.
+	 */
+	WRITE_ONCE(p->priority, __SSH_PACKET_PRIORITY(base, try + 1));
+}
+
+/* Must be called with queue lock held. */
+static struct list_head *__ssh_ptl_queue_find_entrypoint(struct ssh_packet *p)
+{
+	struct list_head *head;
+	struct ssh_packet *q;
+
+	lockdep_assert_held(&p->ptl->queue.lock);
+
+	/*
+	 * We generally assume that there are less control (ACK/NAK) packets
+	 * and re-submitted data packets as there are normal data packets (at
+	 * least in situations in which many packets are queued; if there
+	 * aren't many packets queued the decision on how to iterate should be
+	 * basically irrelevant; the number of control/data packets is more or
+	 * less limited via the maximum number of pending packets). Thus, when
+	 * inserting a control or re-submitted data packet, (determined by
+	 * their priority), we search from front to back. Normal data packets
+	 * are, usually queued directly at the tail of the queue, so for those
+	 * search from back to front.
+	 */
+
+	if (p->priority > SSH_PACKET_PRIORITY(DATA, 0)) {
+		list_for_each(head, &p->ptl->queue.head) {
+			q = list_entry(head, struct ssh_packet, queue_node);
+
+			if (q->priority < p->priority)
+				break;
+		}
+	} else {
+		list_for_each_prev(head, &p->ptl->queue.head) {
+			q = list_entry(head, struct ssh_packet, queue_node);
+
+			if (q->priority >= p->priority) {
+				head = head->next;
+				break;
+			}
+		}
+	}
+
+	return head;
+}
+
+/* Must be called with queue lock held. */
+static int __ssh_ptl_queue_push(struct ssh_packet *packet)
+{
+	struct ssh_ptl *ptl = packet->ptl;
+	struct list_head *head;
+
+	lockdep_assert_held(&ptl->queue.lock);
+
+	if (test_bit(SSH_PTL_SF_SHUTDOWN_BIT, &ptl->state))
+		return -ESHUTDOWN;
+
+	/* Avoid further transitions when canceling/completing. */
+	if (test_bit(SSH_PACKET_SF_LOCKED_BIT, &packet->state))
+		return -EINVAL;
+
+	/* If this packet has already been queued, do not add it. */
+	if (test_and_set_bit(SSH_PACKET_SF_QUEUED_BIT, &packet->state))
+		return -EALREADY;
+
+	head = __ssh_ptl_queue_find_entrypoint(packet);
+
+	list_add_tail(&ssh_packet_get(packet)->queue_node, head);
+	return 0;
+}
+
+static int ssh_ptl_queue_push(struct ssh_packet *packet)
+{
+	int status;
+
+	spin_lock(&packet->ptl->queue.lock);
+	status = __ssh_ptl_queue_push(packet);
+	spin_unlock(&packet->ptl->queue.lock);
+
+	return status;
+}
+
+static void ssh_ptl_queue_remove(struct ssh_packet *packet)
+{
+	struct ssh_ptl *ptl = packet->ptl;
+
+	spin_lock(&ptl->queue.lock);
+
+	if (!test_and_clear_bit(SSH_PACKET_SF_QUEUED_BIT, &packet->state)) {
+		spin_unlock(&ptl->queue.lock);
+		return;
+	}
+
+	list_del(&packet->queue_node);
+
+	spin_unlock(&ptl->queue.lock);
+	ssh_packet_put(packet);
+}
+
+static void ssh_ptl_pending_push(struct ssh_packet *p)
+{
+	struct ssh_ptl *ptl = p->ptl;
+	const ktime_t timestamp = ktime_get_coarse_boottime();
+	const ktime_t timeout = ptl->rtx_timeout.timeout;
+
+	/*
+	 * Note: We can get the time for the timestamp before acquiring the
+	 * lock as this is the only place we're setting it and this function
+	 * is called only from the transmitter thread. Thus it is not possible
+	 * to overwrite the timestamp with an outdated value below.
+	 */
+
+	spin_lock(&ptl->pending.lock);
+
+	/* If we are canceling/completing this packet, do not add it. */
+	if (test_bit(SSH_PACKET_SF_LOCKED_BIT, &p->state)) {
+		spin_unlock(&ptl->pending.lock);
+		return;
+	}
+
+	/*
+	 * On re-submission, the packet has already been added the pending
+	 * set. We still need to update the timestamp as the packet timeout is
+	 * reset for each (re-)submission.
+	 */
+	p->timestamp = timestamp;
+
+	/* In case it is already pending (e.g. re-submission), do not add it. */
+	if (!test_and_set_bit(SSH_PACKET_SF_PENDING_BIT, &p->state)) {
+		atomic_inc(&ptl->pending.count);
+		list_add_tail(&ssh_packet_get(p)->pending_node, &ptl->pending.head);
+	}
+
+	spin_unlock(&ptl->pending.lock);
+
+	/* Arm/update timeout reaper. */
+	ssh_ptl_timeout_reaper_mod(ptl, timestamp, timestamp + timeout);
+}
+
+static void ssh_ptl_pending_remove(struct ssh_packet *packet)
+{
+	struct ssh_ptl *ptl = packet->ptl;
+
+	spin_lock(&ptl->pending.lock);
+
+	if (!test_and_clear_bit(SSH_PACKET_SF_PENDING_BIT, &packet->state)) {
+		spin_unlock(&ptl->pending.lock);
+		return;
+	}
+
+	list_del(&packet->pending_node);
+	atomic_dec(&ptl->pending.count);
+
+	spin_unlock(&ptl->pending.lock);
+
+	ssh_packet_put(packet);
+}
+
+/* Warning: Does not check/set "completed" bit. */
+static void __ssh_ptl_complete(struct ssh_packet *p, int status)
+{
+	struct ssh_ptl *ptl = READ_ONCE(p->ptl);
+
+	trace_ssam_packet_complete(p, status);
+	ptl_dbg_cond(ptl, "ptl: completing packet %p (status: %d)\n", p, status);
+
+	if (p->ops->complete)
+		p->ops->complete(p, status);
+}
+
+static void ssh_ptl_remove_and_complete(struct ssh_packet *p, int status)
+{
+	/*
+	 * A call to this function should in general be preceded by
+	 * set_bit(SSH_PACKET_SF_LOCKED_BIT, &p->flags) to avoid re-adding the
+	 * packet to the structures it's going to be removed from.
+	 *
+	 * The set_bit call does not need explicit memory barriers as the
+	 * implicit barrier of the test_and_set_bit() call below ensure that the
+	 * flag is visible before we actually attempt to remove the packet.
+	 */
+
+	if (test_and_set_bit(SSH_PACKET_SF_COMPLETED_BIT, &p->state))
+		return;
+
+	ssh_ptl_queue_remove(p);
+	ssh_ptl_pending_remove(p);
+
+	__ssh_ptl_complete(p, status);
+}
+
+static bool ssh_ptl_tx_can_process(struct ssh_packet *packet)
+{
+	struct ssh_ptl *ptl = packet->ptl;
+
+	if (test_bit(SSH_PACKET_TY_FLUSH_BIT, &packet->state))
+		return !atomic_read(&ptl->pending.count);
+
+	/* We can always process non-blocking packets. */
+	if (!test_bit(SSH_PACKET_TY_BLOCKING_BIT, &packet->state))
+		return true;
+
+	/* If we are already waiting for this packet, send it again. */
+	if (test_bit(SSH_PACKET_SF_PENDING_BIT, &packet->state))
+		return true;
+
+	/* Otherwise: Check if we have the capacity to send. */
+	return atomic_read(&ptl->pending.count) < SSH_PTL_MAX_PENDING;
+}
+
+static struct ssh_packet *ssh_ptl_tx_pop(struct ssh_ptl *ptl)
+{
+	struct ssh_packet *packet = ERR_PTR(-ENOENT);
+	struct ssh_packet *p, *n;
+
+	spin_lock(&ptl->queue.lock);
+	list_for_each_entry_safe(p, n, &ptl->queue.head, queue_node) {
+		/*
+		 * If we are canceling or completing this packet, ignore it.
+		 * It's going to be removed from this queue shortly.
+		 */
+		if (test_bit(SSH_PACKET_SF_LOCKED_BIT, &p->state))
+			continue;
+
+		/*
+		 * Packets should be ordered non-blocking/to-be-resent first.
+		 * If we cannot process this packet, assume that we can't
+		 * process any following packet either and abort.
+		 */
+		if (!ssh_ptl_tx_can_process(p)) {
+			packet = ERR_PTR(-EBUSY);
+			break;
+		}
+
+		/*
+		 * We are allowed to change the state now. Remove it from the
+		 * queue and mark it as being transmitted.
+		 */
+
+		list_del(&p->queue_node);
+
+		set_bit(SSH_PACKET_SF_TRANSMITTING_BIT, &p->state);
+		/* Ensure that state never gets zero. */
+		smp_mb__before_atomic();
+		clear_bit(SSH_PACKET_SF_QUEUED_BIT, &p->state);
+
+		/*
+		 * Update number of tries. This directly influences the
+		 * priority in case the packet is re-submitted (e.g. via
+		 * timeout/NAK). Note that all reads and writes to the
+		 * priority after the first submission are guarded by the
+		 * queue lock.
+		 */
+		ssh_packet_next_try(p);
+
+		packet = p;
+		break;
+	}
+	spin_unlock(&ptl->queue.lock);
+
+	return packet;
+}
+
+static struct ssh_packet *ssh_ptl_tx_next(struct ssh_ptl *ptl)
+{
+	struct ssh_packet *p;
+
+	p = ssh_ptl_tx_pop(ptl);
+	if (IS_ERR(p))
+		return p;
+
+	if (test_bit(SSH_PACKET_TY_SEQUENCED_BIT, &p->state)) {
+		ptl_dbg(ptl, "ptl: transmitting sequenced packet %p\n", p);
+		ssh_ptl_pending_push(p);
+	} else {
+		ptl_dbg(ptl, "ptl: transmitting non-sequenced packet %p\n", p);
+	}
+
+	return p;
+}
+
+static void ssh_ptl_tx_compl_success(struct ssh_packet *packet)
+{
+	struct ssh_ptl *ptl = packet->ptl;
+
+	ptl_dbg(ptl, "ptl: successfully transmitted packet %p\n", packet);
+
+	/* Transition state to "transmitted". */
+	set_bit(SSH_PACKET_SF_TRANSMITTED_BIT, &packet->state);
+	/* Ensure that state never gets zero. */
+	smp_mb__before_atomic();
+	clear_bit(SSH_PACKET_SF_TRANSMITTING_BIT, &packet->state);
+
+	/* If the packet is unsequenced, we're done: Lock and complete. */
+	if (!test_bit(SSH_PACKET_TY_SEQUENCED_BIT, &packet->state)) {
+		set_bit(SSH_PACKET_SF_LOCKED_BIT, &packet->state);
+		ssh_ptl_remove_and_complete(packet, 0);
+	}
+
+	/*
+	 * Notify that a packet transmission has finished. In general we're only
+	 * waiting for one packet (if any), so wake_up_all should be fine.
+	 */
+	wake_up_all(&ptl->tx.packet_wq);
+}
+
+static void ssh_ptl_tx_compl_error(struct ssh_packet *packet, int status)
+{
+	/* Transmission failure: Lock the packet and try to complete it. */
+	set_bit(SSH_PACKET_SF_LOCKED_BIT, &packet->state);
+	/* Ensure that state never gets zero. */
+	smp_mb__before_atomic();
+	clear_bit(SSH_PACKET_SF_TRANSMITTING_BIT, &packet->state);
+
+	ptl_err(packet->ptl, "ptl: transmission error: %d\n", status);
+	ptl_dbg(packet->ptl, "ptl: failed to transmit packet: %p\n", packet);
+
+	ssh_ptl_remove_and_complete(packet, status);
+
+	/*
+	 * Notify that a packet transmission has finished. In general we're only
+	 * waiting for one packet (if any), so wake_up_all should be fine.
+	 */
+	wake_up_all(&packet->ptl->tx.packet_wq);
+}
+
+static long ssh_ptl_tx_wait_packet(struct ssh_ptl *ptl)
+{
+	int status;
+
+	status = wait_for_completion_interruptible(&ptl->tx.thread_cplt_pkt);
+	reinit_completion(&ptl->tx.thread_cplt_pkt);
+
+	/*
+	 * Ensure completion is cleared before continuing to avoid lost update
+	 * problems.
+	 */
+	smp_mb__after_atomic();
+
+	return status;
+}
+
+static long ssh_ptl_tx_wait_transfer(struct ssh_ptl *ptl, long timeout)
+{
+	long status;
+
+	status = wait_for_completion_interruptible_timeout(&ptl->tx.thread_cplt_tx,
+							   timeout);
+	reinit_completion(&ptl->tx.thread_cplt_tx);
+
+	/*
+	 * Ensure completion is cleared before continuing to avoid lost update
+	 * problems.
+	 */
+	smp_mb__after_atomic();
+
+	return status;
+}
+
+static int ssh_ptl_tx_packet(struct ssh_ptl *ptl, struct ssh_packet *packet)
+{
+	long timeout = SSH_PTL_TX_TIMEOUT;
+	size_t offset = 0;
+
+	/* Note: Flush-packets don't have any data. */
+	if (unlikely(!packet->data.ptr))
+		return 0;
+
+	/* Error injection: drop packet to simulate transmission problem. */
+	if (ssh_ptl_should_drop_packet(packet))
+		return 0;
+
+	/* Error injection: simulate invalid packet data. */
+	ssh_ptl_tx_inject_invalid_data(packet);
+
+	ptl_dbg(ptl, "tx: sending data (length: %zu)\n", packet->data.len);
+	print_hex_dump_debug("tx: ", DUMP_PREFIX_OFFSET, 16, 1,
+			     packet->data.ptr, packet->data.len, false);
+
+	do {
+		ssize_t status, len;
+		u8 *buf;
+
+		buf = packet->data.ptr + offset;
+		len = packet->data.len - offset;
+
+		status = ssh_ptl_write_buf(ptl, packet, buf, len);
+		if (status < 0)
+			return status;
+
+		if (status == len)
+			return 0;
+
+		offset += status;
+
+		timeout = ssh_ptl_tx_wait_transfer(ptl, timeout);
+		if (kthread_should_stop() || !atomic_read(&ptl->tx.running))
+			return -ESHUTDOWN;
+
+		if (timeout < 0)
+			return -EINTR;
+
+		if (timeout == 0)
+			return -ETIMEDOUT;
+	} while (true);
+}
+
+static int ssh_ptl_tx_threadfn(void *data)
+{
+	struct ssh_ptl *ptl = data;
+
+	while (!kthread_should_stop() && atomic_read(&ptl->tx.running)) {
+		struct ssh_packet *packet;
+		int status;
+
+		/* Try to get the next packet. */
+		packet = ssh_ptl_tx_next(ptl);
+
+		/* If no packet can be processed, we are done. */
+		if (IS_ERR(packet)) {
+			ssh_ptl_tx_wait_packet(ptl);
+			continue;
+		}
+
+		/* Transfer and complete packet. */
+		status = ssh_ptl_tx_packet(ptl, packet);
+		if (status)
+			ssh_ptl_tx_compl_error(packet, status);
+		else
+			ssh_ptl_tx_compl_success(packet);
+
+		ssh_packet_put(packet);
+	}
+
+	return 0;
+}
+
+/**
+ * ssh_ptl_tx_wakeup_packet() - Wake up packet transmitter thread for new
+ * packet.
+ * @ptl: The packet transport layer.
+ *
+ * Wakes up the packet transmitter thread, notifying it that a new packet has
+ * arrived and is ready for transfer. If the packet transport layer has been
+ * shut down, calls to this function will be ignored.
+ */
+static void ssh_ptl_tx_wakeup_packet(struct ssh_ptl *ptl)
+{
+	if (test_bit(SSH_PTL_SF_SHUTDOWN_BIT, &ptl->state))
+		return;
+
+	complete(&ptl->tx.thread_cplt_pkt);
+}
+
+/**
+ * ssh_ptl_tx_start() - Start packet transmitter thread.
+ * @ptl: The packet transport layer.
+ *
+ * Return: Returns zero on success, a negative error code on failure.
+ */
+int ssh_ptl_tx_start(struct ssh_ptl *ptl)
+{
+	atomic_set_release(&ptl->tx.running, 1);
+
+	ptl->tx.thread = kthread_run(ssh_ptl_tx_threadfn, ptl, "ssam_serial_hub-tx");
+	if (IS_ERR(ptl->tx.thread))
+		return PTR_ERR(ptl->tx.thread);
+
+	return 0;
+}
+
+/**
+ * ssh_ptl_tx_stop() - Stop packet transmitter thread.
+ * @ptl: The packet transport layer.
+ *
+ * Return: Returns zero on success, a negative error code on failure.
+ */
+int ssh_ptl_tx_stop(struct ssh_ptl *ptl)
+{
+	int status = 0;
+
+	if (!IS_ERR_OR_NULL(ptl->tx.thread)) {
+		/* Tell thread to stop. */
+		atomic_set_release(&ptl->tx.running, 0);
+
+		/*
+		 * Wake up thread in case it is paused. Do not use wakeup
+		 * helpers as this may be called when the shutdown bit has
+		 * already been set.
+		 */
+		complete(&ptl->tx.thread_cplt_pkt);
+		complete(&ptl->tx.thread_cplt_tx);
+
+		/* Finally, wait for thread to stop. */
+		status = kthread_stop(ptl->tx.thread);
+		ptl->tx.thread = NULL;
+	}
+
+	return status;
+}
+
+static struct ssh_packet *ssh_ptl_ack_pop(struct ssh_ptl *ptl, u8 seq_id)
+{
+	struct ssh_packet *packet = ERR_PTR(-ENOENT);
+	struct ssh_packet *p, *n;
+
+	spin_lock(&ptl->pending.lock);
+	list_for_each_entry_safe(p, n, &ptl->pending.head, pending_node) {
+		/*
+		 * We generally expect packets to be in order, so first packet
+		 * to be added to pending is first to be sent, is first to be
+		 * ACKed.
+		 */
+		if (unlikely(ssh_packet_get_seq(p) != seq_id))
+			continue;
+
+		/*
+		 * In case we receive an ACK while handling a transmission
+		 * error completion. The packet will be removed shortly.
+		 */
+		if (unlikely(test_bit(SSH_PACKET_SF_LOCKED_BIT, &p->state))) {
+			packet = ERR_PTR(-EPERM);
+			break;
+		}
+
+		/*
+		 * Mark the packet as ACKed and remove it from pending by
+		 * removing its node and decrementing the pending counter.
+		 */
+		set_bit(SSH_PACKET_SF_ACKED_BIT, &p->state);
+		/* Ensure that state never gets zero. */
+		smp_mb__before_atomic();
+		clear_bit(SSH_PACKET_SF_PENDING_BIT, &p->state);
+
+		atomic_dec(&ptl->pending.count);
+		list_del(&p->pending_node);
+		packet = p;
+
+		break;
+	}
+	spin_unlock(&ptl->pending.lock);
+
+	return packet;
+}
+
+static void ssh_ptl_wait_until_transmitted(struct ssh_packet *packet)
+{
+	wait_event(packet->ptl->tx.packet_wq,
+		   test_bit(SSH_PACKET_SF_TRANSMITTED_BIT, &packet->state) ||
+		   test_bit(SSH_PACKET_SF_LOCKED_BIT, &packet->state));
+}
+
+static void ssh_ptl_acknowledge(struct ssh_ptl *ptl, u8 seq)
+{
+	struct ssh_packet *p;
+
+	p = ssh_ptl_ack_pop(ptl, seq);
+	if (IS_ERR(p)) {
+		if (PTR_ERR(p) == -ENOENT) {
+			/*
+			 * The packet has not been found in the set of pending
+			 * packets.
+			 */
+			ptl_warn(ptl, "ptl: received ACK for non-pending packet\n");
+		} else {
+			/*
+			 * The packet is pending, but we are not allowed to take
+			 * it because it has been locked.
+			 */
+			WARN_ON(PTR_ERR(p) != -EPERM);
+		}
+		return;
+	}
+
+	ptl_dbg(ptl, "ptl: received ACK for packet %p\n", p);
+
+	/*
+	 * It is possible that the packet has been transmitted, but the state
+	 * has not been updated from "transmitting" to "transmitted" yet.
+	 * In that case, we need to wait for this transition to occur in order
+	 * to determine between success or failure.
+	 *
+	 * On transmission failure, the packet will be locked after this call.
+	 * On success, the transmitted bit will be set.
+	 */
+	ssh_ptl_wait_until_transmitted(p);
+
+	/*
+	 * The packet will already be locked in case of a transmission error or
+	 * cancellation. Let the transmitter or cancellation issuer complete the
+	 * packet.
+	 */
+	if (unlikely(test_and_set_bit(SSH_PACKET_SF_LOCKED_BIT, &p->state))) {
+		if (unlikely(!test_bit(SSH_PACKET_SF_TRANSMITTED_BIT, &p->state)))
+			ptl_err(ptl, "ptl: received ACK before packet had been fully transmitted\n");
+
+		ssh_packet_put(p);
+		return;
+	}
+
+	ssh_ptl_remove_and_complete(p, 0);
+	ssh_packet_put(p);
+
+	if (atomic_read(&ptl->pending.count) < SSH_PTL_MAX_PENDING)
+		ssh_ptl_tx_wakeup_packet(ptl);
+}
+
+/**
+ * ssh_ptl_submit() - Submit a packet to the transport layer.
+ * @ptl: The packet transport layer to submit the packet to.
+ * @p:   The packet to submit.
+ *
+ * Submits a new packet to the transport layer, queuing it to be sent. This
+ * function should not be used for re-submission.
+ *
+ * Return: Returns zero on success, %-EINVAL if a packet field is invalid or
+ * the packet has been canceled prior to submission, %-EALREADY if the packet
+ * has already been submitted, or %-ESHUTDOWN if the packet transport layer
+ * has been shut down.
+ */
+int ssh_ptl_submit(struct ssh_ptl *ptl, struct ssh_packet *p)
+{
+	struct ssh_ptl *ptl_old;
+	int status;
+
+	trace_ssam_packet_submit(p);
+
+	/* Validate packet fields. */
+	if (test_bit(SSH_PACKET_TY_FLUSH_BIT, &p->state)) {
+		if (p->data.ptr || test_bit(SSH_PACKET_TY_SEQUENCED_BIT, &p->state))
+			return -EINVAL;
+	} else if (!p->data.ptr) {
+		return -EINVAL;
+	}
+
+	/*
+	 * The ptl reference only gets set on or before the first submission.
+	 * After the first submission, it has to be read-only.
+	 *
+	 * Note that ptl may already be set from upper-layer request
+	 * submission, thus we cannot expect it to be NULL.
+	 */
+	ptl_old = READ_ONCE(p->ptl);
+	if (!ptl_old)
+		WRITE_ONCE(p->ptl, ptl);
+	else if (WARN_ON(ptl_old != ptl))
+		return -EALREADY;	/* Submitted on different PTL. */
+
+	status = ssh_ptl_queue_push(p);
+	if (status)
+		return status;
+
+	if (!test_bit(SSH_PACKET_TY_BLOCKING_BIT, &p->state) ||
+	    (atomic_read(&ptl->pending.count) < SSH_PTL_MAX_PENDING))
+		ssh_ptl_tx_wakeup_packet(ptl);
+
+	return 0;
+}
+
+/*
+ * __ssh_ptl_resubmit() - Re-submit a packet to the transport layer.
+ * @packet: The packet to re-submit.
+ *
+ * Re-submits the given packet: Checks if it can be re-submitted and queues it
+ * if it can, resetting the packet timestamp in the process. Must be called
+ * with the pending lock held.
+ *
+ * Return: Returns %-ECANCELED if the packet has exceeded its number of tries,
+ * %-EINVAL if the packet has been locked, %-EALREADY if the packet is already
+ * on the queue, and %-ESHUTDOWN if the transmission layer has been shut down.
+ */
+static int __ssh_ptl_resubmit(struct ssh_packet *packet)
+{
+	int status;
+	u8 try;
+
+	lockdep_assert_held(&packet->ptl->pending.lock);
+
+	trace_ssam_packet_resubmit(packet);
+
+	spin_lock(&packet->ptl->queue.lock);
+
+	/* Check if the packet is out of tries. */
+	try = ssh_packet_priority_get_try(packet->priority);
+	if (try >= SSH_PTL_MAX_PACKET_TRIES) {
+		spin_unlock(&packet->ptl->queue.lock);
+		return -ECANCELED;
+	}
+
+	status = __ssh_ptl_queue_push(packet);
+	if (status) {
+		/*
+		 * An error here indicates that the packet has either already
+		 * been queued, been locked, or the transport layer is being
+		 * shut down. In all cases: Ignore the error.
+		 */
+		spin_unlock(&packet->ptl->queue.lock);
+		return status;
+	}
+
+	packet->timestamp = KTIME_MAX;
+
+	spin_unlock(&packet->ptl->queue.lock);
+	return 0;
+}
+
+static void ssh_ptl_resubmit_pending(struct ssh_ptl *ptl)
+{
+	struct ssh_packet *p;
+	bool resub = false;
+
+	/*
+	 * Note: We deliberately do not remove/attempt to cancel and complete
+	 * packets that are out of tires in this function. The packet will be
+	 * eventually canceled and completed by the timeout. Removing the packet
+	 * here could lead to overly eager cancellation if the packet has not
+	 * been re-transmitted yet but the tries-counter already updated (i.e
+	 * ssh_ptl_tx_next() removed the packet from the queue and updated the
+	 * counter, but re-transmission for the last try has not actually
+	 * started yet).
+	 */
+
+	spin_lock(&ptl->pending.lock);
+
+	/* Re-queue all pending packets. */
+	list_for_each_entry(p, &ptl->pending.head, pending_node) {
+		/*
+		 * Re-submission fails if the packet is out of tries, has been
+		 * locked, is already queued, or the layer is being shut down.
+		 * No need to re-schedule tx-thread in those cases.
+		 */
+		if (!__ssh_ptl_resubmit(p))
+			resub = true;
+	}
+
+	spin_unlock(&ptl->pending.lock);
+
+	if (resub)
+		ssh_ptl_tx_wakeup_packet(ptl);
+}
+
+/**
+ * ssh_ptl_cancel() - Cancel a packet.
+ * @p: The packet to cancel.
+ *
+ * Cancels a packet. There are no guarantees on when completion and release
+ * callbacks will be called. This may occur during execution of this function
+ * or may occur at any point later.
+ *
+ * Note that it is not guaranteed that the packet will actually be canceled if
+ * the packet is concurrently completed by another process. The only guarantee
+ * of this function is that the packet will be completed (with success,
+ * failure, or cancellation) and released from the transport layer in a
+ * reasonable time-frame.
+ *
+ * May be called before the packet has been submitted, in which case any later
+ * packet submission fails.
+ */
+void ssh_ptl_cancel(struct ssh_packet *p)
+{
+	if (test_and_set_bit(SSH_PACKET_SF_CANCELED_BIT, &p->state))
+		return;
+
+	trace_ssam_packet_cancel(p);
+
+	/*
+	 * Lock packet and commit with memory barrier. If this packet has
+	 * already been locked, it's going to be removed and completed by
+	 * another party, which should have precedence.
+	 */
+	if (test_and_set_bit(SSH_PACKET_SF_LOCKED_BIT, &p->state))
+		return;
+
+	/*
+	 * By marking the packet as locked and employing the implicit memory
+	 * barrier of test_and_set_bit, we have guaranteed that, at this point,
+	 * the packet cannot be added to the queue any more.
+	 *
+	 * In case the packet has never been submitted, packet->ptl is NULL. If
+	 * the packet is currently being submitted, packet->ptl may be NULL or
+	 * non-NULL. Due marking the packet as locked above and committing with
+	 * the memory barrier, we have guaranteed that, if packet->ptl is NULL,
+	 * the packet will never be added to the queue. If packet->ptl is
+	 * non-NULL, we don't have any guarantees.
+	 */
+
+	if (READ_ONCE(p->ptl)) {
+		ssh_ptl_remove_and_complete(p, -ECANCELED);
+
+		if (atomic_read(&p->ptl->pending.count) < SSH_PTL_MAX_PENDING)
+			ssh_ptl_tx_wakeup_packet(p->ptl);
+
+	} else if (!test_and_set_bit(SSH_PACKET_SF_COMPLETED_BIT, &p->state)) {
+		__ssh_ptl_complete(p, -ECANCELED);
+	}
+}
+
+/* Must be called with pending lock held */
+static ktime_t ssh_packet_get_expiration(struct ssh_packet *p, ktime_t timeout)
+{
+	lockdep_assert_held(&p->ptl->pending.lock);
+
+	if (p->timestamp != KTIME_MAX)
+		return ktime_add(p->timestamp, timeout);
+	else
+		return KTIME_MAX;
+}
+
+static void ssh_ptl_timeout_reap(struct work_struct *work)
+{
+	struct ssh_ptl *ptl = to_ssh_ptl(work, rtx_timeout.reaper.work);
+	struct ssh_packet *p, *n;
+	LIST_HEAD(claimed);
+	ktime_t now = ktime_get_coarse_boottime();
+	ktime_t timeout = ptl->rtx_timeout.timeout;
+	ktime_t next = KTIME_MAX;
+	bool resub = false;
+	int status;
+
+	trace_ssam_ptl_timeout_reap(atomic_read(&ptl->pending.count));
+
+	/*
+	 * Mark reaper as "not pending". This is done before checking any
+	 * packets to avoid lost-update type problems.
+	 */
+	spin_lock(&ptl->rtx_timeout.lock);
+	ptl->rtx_timeout.expires = KTIME_MAX;
+	spin_unlock(&ptl->rtx_timeout.lock);
+
+	spin_lock(&ptl->pending.lock);
+
+	list_for_each_entry_safe(p, n, &ptl->pending.head, pending_node) {
+		ktime_t expires = ssh_packet_get_expiration(p, timeout);
+
+		/*
+		 * Check if the timeout hasn't expired yet. Find out next
+		 * expiration date to be handled after this run.
+		 */
+		if (ktime_after(expires, now)) {
+			next = ktime_before(expires, next) ? expires : next;
+			continue;
+		}
+
+		trace_ssam_packet_timeout(p);
+
+		status = __ssh_ptl_resubmit(p);
+
+		/*
+		 * Re-submission fails if the packet is out of tries, has been
+		 * locked, is already queued, or the layer is being shut down.
+		 * No need to re-schedule tx-thread in those cases.
+		 */
+		if (!status)
+			resub = true;
+
+		/* Go to next packet if this packet is not out of tries. */
+		if (status != -ECANCELED)
+			continue;
+
+		/* No more tries left: Cancel the packet. */
+
+		/*
+		 * If someone else has locked the packet already, don't use it
+		 * and let the other party complete it.
+		 */
+		if (test_and_set_bit(SSH_PACKET_SF_LOCKED_BIT, &p->state))
+			continue;
+
+		/*
+		 * We have now marked the packet as locked. Thus it cannot be
+		 * added to the pending list again after we've removed it here.
+		 * We can therefore re-use the pending_node of this packet
+		 * temporarily.
+		 */
+
+		clear_bit(SSH_PACKET_SF_PENDING_BIT, &p->state);
+
+		atomic_dec(&ptl->pending.count);
+		list_del(&p->pending_node);
+
+		list_add_tail(&p->pending_node, &claimed);
+	}
+
+	spin_unlock(&ptl->pending.lock);
+
+	/* Cancel and complete the packet. */
+	list_for_each_entry_safe(p, n, &claimed, pending_node) {
+		if (!test_and_set_bit(SSH_PACKET_SF_COMPLETED_BIT, &p->state)) {
+			ssh_ptl_queue_remove(p);
+			__ssh_ptl_complete(p, -ETIMEDOUT);
+		}
+
+		/*
+		 * Drop the reference we've obtained by removing it from
+		 * the pending set.
+		 */
+		list_del(&p->pending_node);
+		ssh_packet_put(p);
+	}
+
+	/* Ensure that reaper doesn't run again immediately. */
+	next = max(next, ktime_add(now, SSH_PTL_PACKET_TIMEOUT_RESOLUTION));
+	if (next != KTIME_MAX)
+		ssh_ptl_timeout_reaper_mod(ptl, now, next);
+
+	if (resub)
+		ssh_ptl_tx_wakeup_packet(ptl);
+}
+
+static bool ssh_ptl_rx_retransmit_check(struct ssh_ptl *ptl, u8 seq)
+{
+	int i;
+
+	/*
+	 * Check if SEQ has been seen recently (i.e. packet was
+	 * re-transmitted and we should ignore it).
+	 */
+	for (i = 0; i < ARRAY_SIZE(ptl->rx.blocked.seqs); i++) {
+		if (likely(ptl->rx.blocked.seqs[i] != seq))
+			continue;
+
+		ptl_dbg(ptl, "ptl: ignoring repeated data packet\n");
+		return true;
+	}
+
+	/* Update list of blocked sequence IDs. */
+	ptl->rx.blocked.seqs[ptl->rx.blocked.offset] = seq;
+	ptl->rx.blocked.offset = (ptl->rx.blocked.offset + 1)
+				  % ARRAY_SIZE(ptl->rx.blocked.seqs);
+
+	return false;
+}
+
+static void ssh_ptl_rx_dataframe(struct ssh_ptl *ptl,
+				 const struct ssh_frame *frame,
+				 const struct ssam_span *payload)
+{
+	if (ssh_ptl_rx_retransmit_check(ptl, frame->seq))
+		return;
+
+	ptl->ops.data_received(ptl, payload);
+}
+
+static void ssh_ptl_send_ack(struct ssh_ptl *ptl, u8 seq)
+{
+	struct ssh_packet *packet;
+	struct ssam_span buf;
+	struct msgbuf msgb;
+	int status;
+
+	status = ssh_ctrl_packet_alloc(&packet, &buf, GFP_KERNEL);
+	if (status) {
+		ptl_err(ptl, "ptl: failed to allocate ACK packet\n");
+		return;
+	}
+
+	ssh_packet_init(packet, 0, SSH_PACKET_PRIORITY(ACK, 0),
+			&ssh_ptl_ctrl_packet_ops);
+
+	msgb_init(&msgb, buf.ptr, buf.len);
+	msgb_push_ack(&msgb, seq);
+	ssh_packet_set_data(packet, msgb.begin, msgb_bytes_used(&msgb));
+
+	ssh_ptl_submit(ptl, packet);
+	ssh_packet_put(packet);
+}
+
+static void ssh_ptl_send_nak(struct ssh_ptl *ptl)
+{
+	struct ssh_packet *packet;
+	struct ssam_span buf;
+	struct msgbuf msgb;
+	int status;
+
+	status = ssh_ctrl_packet_alloc(&packet, &buf, GFP_KERNEL);
+	if (status) {
+		ptl_err(ptl, "ptl: failed to allocate NAK packet\n");
+		return;
+	}
+
+	ssh_packet_init(packet, 0, SSH_PACKET_PRIORITY(NAK, 0),
+			&ssh_ptl_ctrl_packet_ops);
+
+	msgb_init(&msgb, buf.ptr, buf.len);
+	msgb_push_nak(&msgb);
+	ssh_packet_set_data(packet, msgb.begin, msgb_bytes_used(&msgb));
+
+	ssh_ptl_submit(ptl, packet);
+	ssh_packet_put(packet);
+}
+
+static size_t ssh_ptl_rx_eval(struct ssh_ptl *ptl, struct ssam_span *source)
+{
+	struct ssh_frame *frame;
+	struct ssam_span payload;
+	struct ssam_span aligned;
+	bool syn_found;
+	int status;
+
+	/* Error injection: Modify data to simulate corrupt SYN bytes. */
+	ssh_ptl_rx_inject_invalid_syn(ptl, source);
+
+	/* Find SYN. */
+	syn_found = sshp_find_syn(source, &aligned);
+
+	if (unlikely(aligned.ptr != source->ptr)) {
+		/*
+		 * We expect aligned.ptr == source->ptr. If this is not the
+		 * case, then aligned.ptr > source->ptr and we've encountered
+		 * some unexpected data where we'd expect the start of a new
+		 * message (i.e. the SYN sequence).
+		 *
+		 * This can happen when a CRC check for the previous message
+		 * failed and we start actively searching for the next one
+		 * (via the call to sshp_find_syn() above), or the first bytes
+		 * of a message got dropped or corrupted.
+		 *
+		 * In any case, we issue a warning, send a NAK to the EC to
+		 * request re-transmission of any data we haven't acknowledged
+		 * yet, and finally, skip everything up to the next SYN
+		 * sequence.
+		 */
+
+		ptl_warn(ptl, "rx: parser: invalid start of frame, skipping\n");
+
+		/*
+		 * Notes:
+		 * - This might send multiple NAKs in case the communication
+		 *   starts with an invalid SYN and is broken down into multiple
+		 *   pieces. This should generally be handled fine, we just
+		 *   might receive duplicate data in this case, which is
+		 *   detected when handling data frames.
+		 * - This path will also be executed on invalid CRCs: When an
+		 *   invalid CRC is encountered, the code below will skip data
+		 *   until directly after the SYN. This causes the search for
+		 *   the next SYN, which is generally not placed directly after
+		 *   the last one.
+		 *
+		 *   Open question: Should we send this in case of invalid
+		 *   payload CRCs if the frame-type is non-sequential (current
+		 *   implementation) or should we drop that frame without
+		 *   telling the EC?
+		 */
+		ssh_ptl_send_nak(ptl);
+	}
+
+	if (unlikely(!syn_found))
+		return aligned.ptr - source->ptr;
+
+	/* Error injection: Modify data to simulate corruption. */
+	ssh_ptl_rx_inject_invalid_data(ptl, &aligned);
+
+	/* Parse and validate frame. */
+	status = sshp_parse_frame(&ptl->serdev->dev, &aligned, &frame, &payload,
+				  SSH_PTL_RX_BUF_LEN);
+	if (status)	/* Invalid frame: skip to next SYN. */
+		return aligned.ptr - source->ptr + sizeof(u16);
+	if (!frame)	/* Not enough data. */
+		return aligned.ptr - source->ptr;
+
+	trace_ssam_rx_frame_received(frame);
+
+	switch (frame->type) {
+	case SSH_FRAME_TYPE_ACK:
+		ssh_ptl_acknowledge(ptl, frame->seq);
+		break;
+
+	case SSH_FRAME_TYPE_NAK:
+		ssh_ptl_resubmit_pending(ptl);
+		break;
+
+	case SSH_FRAME_TYPE_DATA_SEQ:
+		ssh_ptl_send_ack(ptl, frame->seq);
+		fallthrough;
+
+	case SSH_FRAME_TYPE_DATA_NSQ:
+		ssh_ptl_rx_dataframe(ptl, frame, &payload);
+		break;
+
+	default:
+		ptl_warn(ptl, "ptl: received frame with unknown type %#04x\n",
+			 frame->type);
+		break;
+	}
+
+	return aligned.ptr - source->ptr + SSH_MESSAGE_LENGTH(payload.len);
+}
+
+static int ssh_ptl_rx_threadfn(void *data)
+{
+	struct ssh_ptl *ptl = data;
+
+	while (true) {
+		struct ssam_span span;
+		size_t offs = 0;
+		size_t n;
+
+		wait_event_interruptible(ptl->rx.wq,
+					 !kfifo_is_empty(&ptl->rx.fifo) ||
+					 kthread_should_stop());
+		if (kthread_should_stop())
+			break;
+
+		/* Copy from fifo to evaluation buffer. */
+		n = sshp_buf_read_from_fifo(&ptl->rx.buf, &ptl->rx.fifo);
+
+		ptl_dbg(ptl, "rx: received data (size: %zu)\n", n);
+		print_hex_dump_debug("rx: ", DUMP_PREFIX_OFFSET, 16, 1,
+				     ptl->rx.buf.ptr + ptl->rx.buf.len - n,
+				     n, false);
+
+		/* Parse until we need more bytes or buffer is empty. */
+		while (offs < ptl->rx.buf.len) {
+			sshp_buf_span_from(&ptl->rx.buf, offs, &span);
+			n = ssh_ptl_rx_eval(ptl, &span);
+			if (n == 0)
+				break;	/* Need more bytes. */
+
+			offs += n;
+		}
+
+		/* Throw away the evaluated parts. */
+		sshp_buf_drop(&ptl->rx.buf, offs);
+	}
+
+	return 0;
+}
+
+static void ssh_ptl_rx_wakeup(struct ssh_ptl *ptl)
+{
+	wake_up(&ptl->rx.wq);
+}
+
+/**
+ * ssh_ptl_rx_start() - Start packet transport layer receiver thread.
+ * @ptl: The packet transport layer.
+ *
+ * Return: Returns zero on success, a negative error code on failure.
+ */
+int ssh_ptl_rx_start(struct ssh_ptl *ptl)
+{
+	if (ptl->rx.thread)
+		return 0;
+
+	ptl->rx.thread = kthread_run(ssh_ptl_rx_threadfn, ptl,
+				     "ssam_serial_hub-rx");
+	if (IS_ERR(ptl->rx.thread))
+		return PTR_ERR(ptl->rx.thread);
+
+	return 0;
+}
+
+/**
+ * ssh_ptl_rx_stop() - Stop packet transport layer receiver thread.
+ * @ptl: The packet transport layer.
+ *
+ * Return: Returns zero on success, a negative error code on failure.
+ */
+int ssh_ptl_rx_stop(struct ssh_ptl *ptl)
+{
+	int status = 0;
+
+	if (ptl->rx.thread) {
+		status = kthread_stop(ptl->rx.thread);
+		ptl->rx.thread = NULL;
+	}
+
+	return status;
+}
+
+/**
+ * ssh_ptl_rx_rcvbuf() - Push data from lower-layer transport to the packet
+ * layer.
+ * @ptl: The packet transport layer.
+ * @buf: Pointer to the data to push to the layer.
+ * @n:   Size of the data to push to the layer, in bytes.
+ *
+ * Pushes data from a lower-layer transport to the receiver fifo buffer of the
+ * packet layer and notifies the receiver thread. Calls to this function are
+ * ignored once the packet layer has been shut down.
+ *
+ * Return: Returns the number of bytes transferred (positive or zero) on
+ * success. Returns %-ESHUTDOWN if the packet layer has been shut down.
+ */
+int ssh_ptl_rx_rcvbuf(struct ssh_ptl *ptl, const u8 *buf, size_t n)
+{
+	int used;
+
+	if (test_bit(SSH_PTL_SF_SHUTDOWN_BIT, &ptl->state))
+		return -ESHUTDOWN;
+
+	used = kfifo_in(&ptl->rx.fifo, buf, n);
+	if (used)
+		ssh_ptl_rx_wakeup(ptl);
+
+	return used;
+}
+
+/**
+ * ssh_ptl_shutdown() - Shut down the packet transport layer.
+ * @ptl: The packet transport layer.
+ *
+ * Shuts down the packet transport layer, removing and canceling all queued
+ * and pending packets. Packets canceled by this operation will be completed
+ * with %-ESHUTDOWN as status. Receiver and transmitter threads will be
+ * stopped.
+ *
+ * As a result of this function, the transport layer will be marked as shut
+ * down. Submission of packets after the transport layer has been shut down
+ * will fail with %-ESHUTDOWN.
+ */
+void ssh_ptl_shutdown(struct ssh_ptl *ptl)
+{
+	LIST_HEAD(complete_q);
+	LIST_HEAD(complete_p);
+	struct ssh_packet *p, *n;
+	int status;
+
+	/* Ensure that no new packets (including ACK/NAK) can be submitted. */
+	set_bit(SSH_PTL_SF_SHUTDOWN_BIT, &ptl->state);
+	/*
+	 * Ensure that the layer gets marked as shut-down before actually
+	 * stopping it. In combination with the check in ssh_ptl_queue_push(),
+	 * this guarantees that no new packets can be added and all already
+	 * queued packets are properly canceled. In combination with the check
+	 * in ssh_ptl_rx_rcvbuf(), this guarantees that received data is
+	 * properly cut off.
+	 */
+	smp_mb__after_atomic();
+
+	status = ssh_ptl_rx_stop(ptl);
+	if (status)
+		ptl_err(ptl, "ptl: failed to stop receiver thread\n");
+
+	status = ssh_ptl_tx_stop(ptl);
+	if (status)
+		ptl_err(ptl, "ptl: failed to stop transmitter thread\n");
+
+	cancel_delayed_work_sync(&ptl->rtx_timeout.reaper);
+
+	/*
+	 * At this point, all threads have been stopped. This means that the
+	 * only references to packets from inside the system are in the queue
+	 * and pending set.
+	 *
+	 * Note: We still need locks here because someone could still be
+	 * canceling packets.
+	 *
+	 * Note 2: We can re-use queue_node (or pending_node) if we mark the
+	 * packet as locked an then remove it from the queue (or pending set
+	 * respectively). Marking the packet as locked avoids re-queuing
+	 * (which should already be prevented by having stopped the treads...)
+	 * and not setting QUEUED_BIT (or PENDING_BIT) prevents removal from a
+	 * new list via other threads (e.g. cancellation).
+	 *
+	 * Note 3: There may be overlap between complete_p and complete_q.
+	 * This is handled via test_and_set_bit() on the "completed" flag
+	 * (also handles cancellation).
+	 */
+
+	/* Mark queued packets as locked and move them to complete_q. */
+	spin_lock(&ptl->queue.lock);
+	list_for_each_entry_safe(p, n, &ptl->queue.head, queue_node) {
+		set_bit(SSH_PACKET_SF_LOCKED_BIT, &p->state);
+		/* Ensure that state does not get zero. */
+		smp_mb__before_atomic();
+		clear_bit(SSH_PACKET_SF_QUEUED_BIT, &p->state);
+
+		list_del(&p->queue_node);
+		list_add_tail(&p->queue_node, &complete_q);
+	}
+	spin_unlock(&ptl->queue.lock);
+
+	/* Mark pending packets as locked and move them to complete_p. */
+	spin_lock(&ptl->pending.lock);
+	list_for_each_entry_safe(p, n, &ptl->pending.head, pending_node) {
+		set_bit(SSH_PACKET_SF_LOCKED_BIT, &p->state);
+		/* Ensure that state does not get zero. */
+		smp_mb__before_atomic();
+		clear_bit(SSH_PACKET_SF_PENDING_BIT, &p->state);
+
+		list_del(&p->pending_node);
+		list_add_tail(&p->pending_node, &complete_q);
+	}
+	atomic_set(&ptl->pending.count, 0);
+	spin_unlock(&ptl->pending.lock);
+
+	/* Complete and drop packets on complete_q. */
+	list_for_each_entry(p, &complete_q, queue_node) {
+		if (!test_and_set_bit(SSH_PACKET_SF_COMPLETED_BIT, &p->state))
+			__ssh_ptl_complete(p, -ESHUTDOWN);
+
+		ssh_packet_put(p);
+	}
+
+	/* Complete and drop packets on complete_p. */
+	list_for_each_entry(p, &complete_p, pending_node) {
+		if (!test_and_set_bit(SSH_PACKET_SF_COMPLETED_BIT, &p->state))
+			__ssh_ptl_complete(p, -ESHUTDOWN);
+
+		ssh_packet_put(p);
+	}
+
+	/*
+	 * At this point we have guaranteed that the system doesn't reference
+	 * any packets any more.
+	 */
+}
+
+/**
+ * ssh_ptl_init() - Initialize packet transport layer.
+ * @ptl:    The packet transport layer to initialize.
+ * @serdev: The underlying serial device, i.e. the lower-level transport.
+ * @ops:    Packet layer operations.
+ *
+ * Initializes the given packet transport layer. Transmitter and receiver
+ * threads must be started separately via ssh_ptl_tx_start() and
+ * ssh_ptl_rx_start(), after the packet-layer has been initialized and the
+ * lower-level transport layer has been set up.
+ *
+ * Return: Returns zero on success and a nonzero error code on failure.
+ */
+int ssh_ptl_init(struct ssh_ptl *ptl, struct serdev_device *serdev,
+		 struct ssh_ptl_ops *ops)
+{
+	int i, status;
+
+	ptl->serdev = serdev;
+	ptl->state = 0;
+
+	spin_lock_init(&ptl->queue.lock);
+	INIT_LIST_HEAD(&ptl->queue.head);
+
+	spin_lock_init(&ptl->pending.lock);
+	INIT_LIST_HEAD(&ptl->pending.head);
+	atomic_set_release(&ptl->pending.count, 0);
+
+	ptl->tx.thread = NULL;
+	atomic_set(&ptl->tx.running, 0);
+	init_completion(&ptl->tx.thread_cplt_pkt);
+	init_completion(&ptl->tx.thread_cplt_tx);
+	init_waitqueue_head(&ptl->tx.packet_wq);
+
+	ptl->rx.thread = NULL;
+	init_waitqueue_head(&ptl->rx.wq);
+
+	spin_lock_init(&ptl->rtx_timeout.lock);
+	ptl->rtx_timeout.timeout = SSH_PTL_PACKET_TIMEOUT;
+	ptl->rtx_timeout.expires = KTIME_MAX;
+	INIT_DELAYED_WORK(&ptl->rtx_timeout.reaper, ssh_ptl_timeout_reap);
+
+	ptl->ops = *ops;
+
+	/* Initialize list of recent/blocked SEQs with invalid sequence IDs. */
+	for (i = 0; i < ARRAY_SIZE(ptl->rx.blocked.seqs); i++)
+		ptl->rx.blocked.seqs[i] = U16_MAX;
+	ptl->rx.blocked.offset = 0;
+
+	status = kfifo_alloc(&ptl->rx.fifo, SSH_PTL_RX_FIFO_LEN, GFP_KERNEL);
+	if (status)
+		return status;
+
+	status = sshp_buf_alloc(&ptl->rx.buf, SSH_PTL_RX_BUF_LEN, GFP_KERNEL);
+	if (status)
+		kfifo_free(&ptl->rx.fifo);
+
+	return status;
+}
+
+/**
+ * ssh_ptl_destroy() - Deinitialize packet transport layer.
+ * @ptl: The packet transport layer to deinitialize.
+ *
+ * Deinitializes the given packet transport layer and frees resources
+ * associated with it. If receiver and/or transmitter threads have been
+ * started, the layer must first be shut down via ssh_ptl_shutdown() before
+ * this function can be called.
+ */
+void ssh_ptl_destroy(struct ssh_ptl *ptl)
+{
+	kfifo_free(&ptl->rx.fifo);
+	sshp_buf_free(&ptl->rx.buf);
+}
diff --git a/drivers/platform/surface/aggregator/ssh_packet_layer.h b/drivers/platform/surface/aggregator/ssh_packet_layer.h
new file mode 100644
index 000000000000..e8757d03f279
--- /dev/null
+++ b/drivers/platform/surface/aggregator/ssh_packet_layer.h
@@ -0,0 +1,190 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * SSH packet transport layer.
+ *
+ * Copyright (C) 2019-2020 Maximilian Luz <luzmaximilian@gmail.com>
+ */
+
+#ifndef _SURFACE_AGGREGATOR_SSH_PACKET_LAYER_H
+#define _SURFACE_AGGREGATOR_SSH_PACKET_LAYER_H
+
+#include <linux/atomic.h>
+#include <linux/kfifo.h>
+#include <linux/ktime.h>
+#include <linux/list.h>
+#include <linux/serdev.h>
+#include <linux/spinlock.h>
+#include <linux/types.h>
+#include <linux/wait.h>
+#include <linux/workqueue.h>
+
+#include <linux/surface_aggregator/serial_hub.h>
+#include "ssh_parser.h"
+
+/**
+ * enum ssh_ptl_state_flags - State-flags for &struct ssh_ptl.
+ *
+ * @SSH_PTL_SF_SHUTDOWN_BIT:
+ *	Indicates that the packet transport layer has been shut down or is
+ *	being shut down and should not accept any new packets/data.
+ */
+enum ssh_ptl_state_flags {
+	SSH_PTL_SF_SHUTDOWN_BIT,
+};
+
+/**
+ * struct ssh_ptl_ops - Callback operations for packet transport layer.
+ * @data_received: Function called when a data-packet has been received. Both,
+ *                 the packet layer on which the packet has been received and
+ *                 the packet's payload data are provided to this function.
+ */
+struct ssh_ptl_ops {
+	void (*data_received)(struct ssh_ptl *p, const struct ssam_span *data);
+};
+
+/**
+ * struct ssh_ptl - SSH packet transport layer.
+ * @serdev:        Serial device providing the underlying data transport.
+ * @state:         State(-flags) of the transport layer.
+ * @queue:         Packet submission queue.
+ * @queue.lock:    Lock for modifying the packet submission queue.
+ * @queue.head:    List-head of the packet submission queue.
+ * @pending:       Set/list of pending packets.
+ * @pending.lock:  Lock for modifying the pending set.
+ * @pending.head:  List-head of the pending set/list.
+ * @pending.count: Number of currently pending packets.
+ * @tx:            Transmitter subsystem.
+ * @tx.running:    Flag indicating (desired) transmitter thread state.
+ * @tx.thread:     Transmitter thread.
+ * @tx.thread_cplt_tx:  Completion for transmitter thread waiting on transfer.
+ * @tx.thread_cplt_pkt: Completion for transmitter thread waiting on packets.
+ * @tx.packet_wq:  Waitqueue-head for packet transmit completion.
+ * @rx:            Receiver subsystem.
+ * @rx.thread:     Receiver thread.
+ * @rx.wq:         Waitqueue-head for receiver thread.
+ * @rx.fifo:       Buffer for receiving data/pushing data to receiver thread.
+ * @rx.buf:        Buffer for evaluating data on receiver thread.
+ * @rx.blocked:    List of recent/blocked sequence IDs to detect retransmission.
+ * @rx.blocked.seqs:   Array of blocked sequence IDs.
+ * @rx.blocked.offset: Offset indicating where a new ID should be inserted.
+ * @rtx_timeout:   Retransmission timeout subsystem.
+ * @rtx_timeout.lock:    Lock for modifying the retransmission timeout reaper.
+ * @rtx_timeout.timeout: Timeout interval for retransmission.
+ * @rtx_timeout.expires: Time specifying when the reaper work is next scheduled.
+ * @rtx_timeout.reaper:  Work performing timeout checks and subsequent actions.
+ * @ops:           Packet layer operations.
+ */
+struct ssh_ptl {
+	struct serdev_device *serdev;
+	unsigned long state;
+
+	struct {
+		spinlock_t lock;
+		struct list_head head;
+	} queue;
+
+	struct {
+		spinlock_t lock;
+		struct list_head head;
+		atomic_t count;
+	} pending;
+
+	struct {
+		atomic_t running;
+		struct task_struct *thread;
+		struct completion thread_cplt_tx;
+		struct completion thread_cplt_pkt;
+		struct wait_queue_head packet_wq;
+	} tx;
+
+	struct {
+		struct task_struct *thread;
+		struct wait_queue_head wq;
+		struct kfifo fifo;
+		struct sshp_buf buf;
+
+		struct {
+			u16 seqs[8];
+			u16 offset;
+		} blocked;
+	} rx;
+
+	struct {
+		spinlock_t lock;
+		ktime_t timeout;
+		ktime_t expires;
+		struct delayed_work reaper;
+	} rtx_timeout;
+
+	struct ssh_ptl_ops ops;
+};
+
+#define __ssam_prcond(func, p, fmt, ...)		\
+	do {						\
+		typeof(p) __p = (p);			\
+							\
+		if (__p)				\
+			func(__p, fmt, ##__VA_ARGS__);	\
+	} while (0)
+
+#define ptl_dbg(p, fmt, ...)  dev_dbg(&(p)->serdev->dev, fmt, ##__VA_ARGS__)
+#define ptl_info(p, fmt, ...) dev_info(&(p)->serdev->dev, fmt, ##__VA_ARGS__)
+#define ptl_warn(p, fmt, ...) dev_warn(&(p)->serdev->dev, fmt, ##__VA_ARGS__)
+#define ptl_err(p, fmt, ...)  dev_err(&(p)->serdev->dev, fmt, ##__VA_ARGS__)
+#define ptl_dbg_cond(p, fmt, ...) __ssam_prcond(ptl_dbg, p, fmt, ##__VA_ARGS__)
+
+#define to_ssh_ptl(ptr, member) \
+	container_of(ptr, struct ssh_ptl, member)
+
+int ssh_ptl_init(struct ssh_ptl *ptl, struct serdev_device *serdev,
+		 struct ssh_ptl_ops *ops);
+
+void ssh_ptl_destroy(struct ssh_ptl *ptl);
+
+/**
+ * ssh_ptl_get_device() - Get device associated with packet transport layer.
+ * @ptl: The packet transport layer.
+ *
+ * Return: Returns the device on which the given packet transport layer builds
+ * upon.
+ */
+static inline struct device *ssh_ptl_get_device(struct ssh_ptl *ptl)
+{
+	return ptl->serdev ? &ptl->serdev->dev : NULL;
+}
+
+int ssh_ptl_tx_start(struct ssh_ptl *ptl);
+int ssh_ptl_tx_stop(struct ssh_ptl *ptl);
+int ssh_ptl_rx_start(struct ssh_ptl *ptl);
+int ssh_ptl_rx_stop(struct ssh_ptl *ptl);
+void ssh_ptl_shutdown(struct ssh_ptl *ptl);
+
+int ssh_ptl_submit(struct ssh_ptl *ptl, struct ssh_packet *p);
+void ssh_ptl_cancel(struct ssh_packet *p);
+
+int ssh_ptl_rx_rcvbuf(struct ssh_ptl *ptl, const u8 *buf, size_t n);
+
+/**
+ * ssh_ptl_tx_wakeup_transfer() - Wake up packet transmitter thread for
+ * transfer.
+ * @ptl: The packet transport layer.
+ *
+ * Wakes up the packet transmitter thread, notifying it that the underlying
+ * transport has more space for data to be transmitted. If the packet
+ * transport layer has been shut down, calls to this function will be ignored.
+ */
+static inline void ssh_ptl_tx_wakeup_transfer(struct ssh_ptl *ptl)
+{
+	if (test_bit(SSH_PTL_SF_SHUTDOWN_BIT, &ptl->state))
+		return;
+
+	complete(&ptl->tx.thread_cplt_tx);
+}
+
+void ssh_packet_init(struct ssh_packet *packet, unsigned long type,
+		     u8 priority, const struct ssh_packet_ops *ops);
+
+int ssh_ctrl_packet_cache_init(void);
+void ssh_ctrl_packet_cache_destroy(void);
+
+#endif /* _SURFACE_AGGREGATOR_SSH_PACKET_LAYER_H */
diff --git a/drivers/platform/surface/aggregator/ssh_parser.c b/drivers/platform/surface/aggregator/ssh_parser.c
new file mode 100644
index 000000000000..e2dead8de94a
--- /dev/null
+++ b/drivers/platform/surface/aggregator/ssh_parser.c
@@ -0,0 +1,228 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * SSH message parser.
+ *
+ * Copyright (C) 2019-2020 Maximilian Luz <luzmaximilian@gmail.com>
+ */
+
+#include <asm/unaligned.h>
+#include <linux/compiler.h>
+#include <linux/device.h>
+#include <linux/types.h>
+
+#include <linux/surface_aggregator/serial_hub.h>
+#include "ssh_parser.h"
+
+/**
+ * sshp_validate_crc() - Validate a CRC in raw message data.
+ * @src: The span of data over which the CRC should be computed.
+ * @crc: The pointer to the expected u16 CRC value.
+ *
+ * Computes the CRC of the provided data span (@src), compares it to the CRC
+ * stored at the given address (@crc), and returns the result of this
+ * comparison, i.e. %true if equal. This function is intended to run on raw
+ * input/message data.
+ *
+ * Return: Returns %true if the computed CRC matches the stored CRC, %false
+ * otherwise.
+ */
+static bool sshp_validate_crc(const struct ssam_span *src, const u8 *crc)
+{
+	u16 actual = ssh_crc(src->ptr, src->len);
+	u16 expected = get_unaligned_le16(crc);
+
+	return actual == expected;
+}
+
+/**
+ * sshp_starts_with_syn() - Check if the given data starts with SSH SYN bytes.
+ * @src: The data span to check the start of.
+ */
+static bool sshp_starts_with_syn(const struct ssam_span *src)
+{
+	return src->len >= 2 && get_unaligned_le16(src->ptr) == SSH_MSG_SYN;
+}
+
+/**
+ * sshp_find_syn() - Find SSH SYN bytes in the given data span.
+ * @src: The data span to search in.
+ * @rem: The span (output) indicating the remaining data, starting with SSH
+ *       SYN bytes, if found.
+ *
+ * Search for SSH SYN bytes in the given source span. If found, set the @rem
+ * span to the remaining data, starting with the first SYN bytes and capped by
+ * the source span length, and return %true. This function does not copy any
+ * data, but rather only sets pointers to the respective start addresses and
+ * length values.
+ *
+ * If no SSH SYN bytes could be found, set the @rem span to the zero-length
+ * span at the end of the source span and return %false.
+ *
+ * If partial SSH SYN bytes could be found at the end of the source span, set
+ * the @rem span to cover these partial SYN bytes, capped by the end of the
+ * source span, and return %false. This function should then be re-run once
+ * more data is available.
+ *
+ * Return: Returns %true if a complete SSH SYN sequence could be found,
+ * %false otherwise.
+ */
+bool sshp_find_syn(const struct ssam_span *src, struct ssam_span *rem)
+{
+	size_t i;
+
+	for (i = 0; i < src->len - 1; i++) {
+		if (likely(get_unaligned_le16(src->ptr + i) == SSH_MSG_SYN)) {
+			rem->ptr = src->ptr + i;
+			rem->len = src->len - i;
+			return true;
+		}
+	}
+
+	if (unlikely(src->ptr[src->len - 1] == (SSH_MSG_SYN & 0xff))) {
+		rem->ptr = src->ptr + src->len - 1;
+		rem->len = 1;
+		return false;
+	}
+
+	rem->ptr = src->ptr + src->len;
+	rem->len = 0;
+	return false;
+}
+
+/**
+ * sshp_parse_frame() - Parse SSH frame.
+ * @dev: The device used for logging.
+ * @source: The source to parse from.
+ * @frame: The parsed frame (output).
+ * @payload: The parsed payload (output).
+ * @maxlen: The maximum supported message length.
+ *
+ * Parses and validates a SSH frame, including its payload, from the given
+ * source. Sets the provided @frame pointer to the start of the frame and
+ * writes the limits of the frame payload to the provided @payload span
+ * pointer.
+ *
+ * This function does not copy any data, but rather only validates the message
+ * data and sets pointers (and length values) to indicate the respective parts.
+ *
+ * If no complete SSH frame could be found, the frame pointer will be set to
+ * the %NULL pointer and the payload span will be set to the null span (start
+ * pointer %NULL, size zero).
+ *
+ * Return: Returns zero on success or if the frame is incomplete, %-ENOMSG if
+ * the start of the message is invalid, %-EBADMSG if any (frame-header or
+ * payload) CRC is invalid, or %-EMSGSIZE if the SSH message is bigger than
+ * the maximum message length specified in the @maxlen parameter.
+ */
+int sshp_parse_frame(const struct device *dev, const struct ssam_span *source,
+		     struct ssh_frame **frame, struct ssam_span *payload,
+		     size_t maxlen)
+{
+	struct ssam_span sf;
+	struct ssam_span sp;
+
+	/* Initialize output. */
+	*frame = NULL;
+	payload->ptr = NULL;
+	payload->len = 0;
+
+	if (!sshp_starts_with_syn(source)) {
+		dev_warn(dev, "rx: parser: invalid start of frame\n");
+		return -ENOMSG;
+	}
+
+	/* Check for minimum packet length. */
+	if (unlikely(source->len < SSH_MESSAGE_LENGTH(0))) {
+		dev_dbg(dev, "rx: parser: not enough data for frame\n");
+		return 0;
+	}
+
+	/* Pin down frame. */
+	sf.ptr = source->ptr + sizeof(u16);
+	sf.len = sizeof(struct ssh_frame);
+
+	/* Validate frame CRC. */
+	if (unlikely(!sshp_validate_crc(&sf, sf.ptr + sf.len))) {
+		dev_warn(dev, "rx: parser: invalid frame CRC\n");
+		return -EBADMSG;
+	}
+
+	/* Ensure packet does not exceed maximum length. */
+	sp.len = get_unaligned_le16(&((struct ssh_frame *)sf.ptr)->len);
+	if (unlikely(SSH_MESSAGE_LENGTH(sp.len) > maxlen)) {
+		dev_warn(dev, "rx: parser: frame too large: %llu bytes\n",
+			 SSH_MESSAGE_LENGTH(sp.len));
+		return -EMSGSIZE;
+	}
+
+	/* Pin down payload. */
+	sp.ptr = sf.ptr + sf.len + sizeof(u16);
+
+	/* Check for frame + payload length. */
+	if (source->len < SSH_MESSAGE_LENGTH(sp.len)) {
+		dev_dbg(dev, "rx: parser: not enough data for payload\n");
+		return 0;
+	}
+
+	/* Validate payload CRC. */
+	if (unlikely(!sshp_validate_crc(&sp, sp.ptr + sp.len))) {
+		dev_warn(dev, "rx: parser: invalid payload CRC\n");
+		return -EBADMSG;
+	}
+
+	*frame = (struct ssh_frame *)sf.ptr;
+	*payload = sp;
+
+	dev_dbg(dev, "rx: parser: valid frame found (type: %#04x, len: %u)\n",
+		(*frame)->type, (*frame)->len);
+
+	return 0;
+}
+
+/**
+ * sshp_parse_command() - Parse SSH command frame payload.
+ * @dev: The device used for logging.
+ * @source: The source to parse from.
+ * @command: The parsed command (output).
+ * @command_data: The parsed command data/payload (output).
+ *
+ * Parses and validates a SSH command frame payload. Sets the @command pointer
+ * to the command header and the @command_data span to the command data (i.e.
+ * payload of the command). This will result in a zero-length span if the
+ * command does not have any associated data/payload. This function does not
+ * check the frame-payload-type field, which should be checked by the caller
+ * before calling this function.
+ *
+ * The @source parameter should be the complete frame payload, e.g. returned
+ * by the sshp_parse_frame() command.
+ *
+ * This function does not copy any data, but rather only validates the frame
+ * payload data and sets pointers (and length values) to indicate the
+ * respective parts.
+ *
+ * Return: Returns zero on success or %-ENOMSG if @source does not represent a
+ * valid command-type frame payload, i.e. is too short.
+ */
+int sshp_parse_command(const struct device *dev, const struct ssam_span *source,
+		       struct ssh_command **command,
+		       struct ssam_span *command_data)
+{
+	/* Check for minimum length. */
+	if (unlikely(source->len < sizeof(struct ssh_command))) {
+		*command = NULL;
+		command_data->ptr = NULL;
+		command_data->len = 0;
+
+		dev_err(dev, "rx: parser: command payload is too short\n");
+		return -ENOMSG;
+	}
+
+	*command = (struct ssh_command *)source->ptr;
+	command_data->ptr = source->ptr + sizeof(struct ssh_command);
+	command_data->len = source->len - sizeof(struct ssh_command);
+
+	dev_dbg(dev, "rx: parser: valid command found (tc: %#04x, cid: %#04x)\n",
+		(*command)->tc, (*command)->cid);
+
+	return 0;
+}
diff --git a/drivers/platform/surface/aggregator/ssh_parser.h b/drivers/platform/surface/aggregator/ssh_parser.h
new file mode 100644
index 000000000000..63c38d350988
--- /dev/null
+++ b/drivers/platform/surface/aggregator/ssh_parser.h
@@ -0,0 +1,154 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * SSH message parser.
+ *
+ * Copyright (C) 2019-2020 Maximilian Luz <luzmaximilian@gmail.com>
+ */
+
+#ifndef _SURFACE_AGGREGATOR_SSH_PARSER_H
+#define _SURFACE_AGGREGATOR_SSH_PARSER_H
+
+#include <linux/device.h>
+#include <linux/kfifo.h>
+#include <linux/slab.h>
+#include <linux/types.h>
+
+#include <linux/surface_aggregator/serial_hub.h>
+
+/**
+ * struct sshp_buf - Parser buffer for SSH messages.
+ * @ptr: Pointer to the beginning of the buffer.
+ * @len: Number of bytes used in the buffer.
+ * @cap: Maximum capacity of the buffer.
+ */
+struct sshp_buf {
+	u8    *ptr;
+	size_t len;
+	size_t cap;
+};
+
+/**
+ * sshp_buf_init() - Initialize a SSH parser buffer.
+ * @buf: The buffer to initialize.
+ * @ptr: The memory backing the buffer.
+ * @cap: The length of the memory backing the buffer, i.e. its capacity.
+ *
+ * Initializes the buffer with the given memory as backing and set its used
+ * length to zero.
+ */
+static inline void sshp_buf_init(struct sshp_buf *buf, u8 *ptr, size_t cap)
+{
+	buf->ptr = ptr;
+	buf->len = 0;
+	buf->cap = cap;
+}
+
+/**
+ * sshp_buf_alloc() - Allocate and initialize a SSH parser buffer.
+ * @buf:   The buffer to initialize/allocate to.
+ * @cap:   The desired capacity of the buffer.
+ * @flags: The flags used for allocating the memory.
+ *
+ * Allocates @cap bytes and initializes the provided buffer struct with the
+ * allocated memory.
+ *
+ * Return: Returns zero on success and %-ENOMEM if allocation failed.
+ */
+static inline int sshp_buf_alloc(struct sshp_buf *buf, size_t cap, gfp_t flags)
+{
+	u8 *ptr;
+
+	ptr = kzalloc(cap, flags);
+	if (!ptr)
+		return -ENOMEM;
+
+	sshp_buf_init(buf, ptr, cap);
+	return 0;
+}
+
+/**
+ * sshp_buf_free() - Free a SSH parser buffer.
+ * @buf: The buffer to free.
+ *
+ * Frees a SSH parser buffer by freeing the memory backing it and then
+ * resetting its pointer to %NULL and length and capacity to zero. Intended to
+ * free a buffer previously allocated with sshp_buf_alloc().
+ */
+static inline void sshp_buf_free(struct sshp_buf *buf)
+{
+	kfree(buf->ptr);
+	buf->ptr = NULL;
+	buf->len = 0;
+	buf->cap = 0;
+}
+
+/**
+ * sshp_buf_drop() - Drop data from the beginning of the buffer.
+ * @buf: The buffer to drop data from.
+ * @n:   The number of bytes to drop.
+ *
+ * Drops the first @n bytes from the buffer. Re-aligns any remaining data to
+ * the beginning of the buffer.
+ */
+static inline void sshp_buf_drop(struct sshp_buf *buf, size_t n)
+{
+	memmove(buf->ptr, buf->ptr + n, buf->len - n);
+	buf->len -= n;
+}
+
+/**
+ * sshp_buf_read_from_fifo() - Transfer data from a fifo to the buffer.
+ * @buf:  The buffer to write the data into.
+ * @fifo: The fifo to read the data from.
+ *
+ * Transfers the data contained in the fifo to the buffer, removing it from
+ * the fifo. This function will try to transfer as much data as possible,
+ * limited either by the remaining space in the buffer or by the number of
+ * bytes available in the fifo.
+ *
+ * Return: Returns the number of bytes transferred.
+ */
+static inline size_t sshp_buf_read_from_fifo(struct sshp_buf *buf,
+					     struct kfifo *fifo)
+{
+	size_t n;
+
+	n =  kfifo_out(fifo, buf->ptr + buf->len, buf->cap - buf->len);
+	buf->len += n;
+
+	return n;
+}
+
+/**
+ * sshp_buf_span_from() - Initialize a span from the given buffer and offset.
+ * @buf:    The buffer to create the span from.
+ * @offset: The offset in the buffer at which the span should start.
+ * @span:   The span to initialize (output).
+ *
+ * Initializes the provided span to point to the memory at the given offset in
+ * the buffer, with the length of the span being capped by the number of bytes
+ * used in the buffer after the offset (i.e. bytes remaining after the
+ * offset).
+ *
+ * Warning: This function does not validate that @offset is less than or equal
+ * to the number of bytes used in the buffer or the buffer capacity. This must
+ * be guaranteed by the caller.
+ */
+static inline void sshp_buf_span_from(struct sshp_buf *buf, size_t offset,
+				      struct ssam_span *span)
+{
+	span->ptr = buf->ptr + offset;
+	span->len = buf->len - offset;
+}
+
+bool sshp_find_syn(const struct ssam_span *src, struct ssam_span *rem);
+
+int sshp_parse_frame(const struct device *dev, const struct ssam_span *source,
+		     struct ssh_frame **frame, struct ssam_span *payload,
+		     size_t maxlen);
+
+int sshp_parse_command(const struct device *dev, const struct ssam_span *source,
+		       struct ssh_command **command,
+		       struct ssam_span *command_data);
+
+#endif /* _SURFACE_AGGREGATOR_SSH_PARSER_h */
diff --git a/drivers/platform/surface/aggregator/ssh_request_layer.c b/drivers/platform/surface/aggregator/ssh_request_layer.c
new file mode 100644
index 000000000000..52a83a8fcf82
--- /dev/null
+++ b/drivers/platform/surface/aggregator/ssh_request_layer.c
@@ -0,0 +1,1263 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * SSH request transport layer.
+ *
+ * Copyright (C) 2019-2020 Maximilian Luz <luzmaximilian@gmail.com>
+ */
+
+#include <asm/unaligned.h>
+#include <linux/atomic.h>
+#include <linux/completion.h>
+#include <linux/error-injection.h>
+#include <linux/ktime.h>
+#include <linux/limits.h>
+#include <linux/list.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+#include <linux/types.h>
+#include <linux/workqueue.h>
+
+#include <linux/surface_aggregator/serial_hub.h>
+#include <linux/surface_aggregator/controller.h>
+
+#include "ssh_packet_layer.h"
+#include "ssh_request_layer.h"
+
+#include "trace.h"
+
+/*
+ * SSH_RTL_REQUEST_TIMEOUT - Request timeout.
+ *
+ * Timeout as ktime_t delta for request responses. If we have not received a
+ * response in this time-frame after finishing the underlying packet
+ * transmission, the request will be completed with %-ETIMEDOUT as status
+ * code.
+ */
+#define SSH_RTL_REQUEST_TIMEOUT			ms_to_ktime(3000)
+
+/*
+ * SSH_RTL_REQUEST_TIMEOUT_RESOLUTION - Request timeout granularity.
+ *
+ * Time-resolution for timeouts. Should be larger than one jiffy to avoid
+ * direct re-scheduling of reaper work_struct.
+ */
+#define SSH_RTL_REQUEST_TIMEOUT_RESOLUTION	ms_to_ktime(max(2000 / HZ, 50))
+
+/*
+ * SSH_RTL_MAX_PENDING - Maximum number of pending requests.
+ *
+ * Maximum number of requests concurrently waiting to be completed (i.e.
+ * waiting for the corresponding packet transmission to finish if they don't
+ * have a response or waiting for a response if they have one).
+ */
+#define SSH_RTL_MAX_PENDING		3
+
+/*
+ * SSH_RTL_TX_BATCH - Maximum number of requests processed per work execution.
+ * Used to prevent livelocking of the workqueue. Value chosen via educated
+ * guess, may be adjusted.
+ */
+#define SSH_RTL_TX_BATCH		10
+
+#ifdef CONFIG_SURFACE_AGGREGATOR_ERROR_INJECTION
+
+/**
+ * ssh_rtl_should_drop_response() - Error injection hook to drop request
+ * responses.
+ *
+ * Useful to cause request transmission timeouts in the driver by dropping the
+ * response to a request.
+ */
+static noinline bool ssh_rtl_should_drop_response(void)
+{
+	return false;
+}
+ALLOW_ERROR_INJECTION(ssh_rtl_should_drop_response, TRUE);
+
+#else
+
+static inline bool ssh_rtl_should_drop_response(void)
+{
+	return false;
+}
+
+#endif
+
+static u16 ssh_request_get_rqid(struct ssh_request *rqst)
+{
+	return get_unaligned_le16(rqst->packet.data.ptr
+				  + SSH_MSGOFFSET_COMMAND(rqid));
+}
+
+static u32 ssh_request_get_rqid_safe(struct ssh_request *rqst)
+{
+	if (!rqst->packet.data.ptr)
+		return U32_MAX;
+
+	return ssh_request_get_rqid(rqst);
+}
+
+static void ssh_rtl_queue_remove(struct ssh_request *rqst)
+{
+	struct ssh_rtl *rtl = ssh_request_rtl(rqst);
+
+	spin_lock(&rtl->queue.lock);
+
+	if (!test_and_clear_bit(SSH_REQUEST_SF_QUEUED_BIT, &rqst->state)) {
+		spin_unlock(&rtl->queue.lock);
+		return;
+	}
+
+	list_del(&rqst->node);
+
+	spin_unlock(&rtl->queue.lock);
+	ssh_request_put(rqst);
+}
+
+static bool ssh_rtl_queue_empty(struct ssh_rtl *rtl)
+{
+	bool empty;
+
+	spin_lock(&rtl->queue.lock);
+	empty = list_empty(&rtl->queue.head);
+	spin_unlock(&rtl->queue.lock);
+
+	return empty;
+}
+
+static void ssh_rtl_pending_remove(struct ssh_request *rqst)
+{
+	struct ssh_rtl *rtl = ssh_request_rtl(rqst);
+
+	spin_lock(&rtl->pending.lock);
+
+	if (!test_and_clear_bit(SSH_REQUEST_SF_PENDING_BIT, &rqst->state)) {
+		spin_unlock(&rtl->pending.lock);
+		return;
+	}
+
+	atomic_dec(&rtl->pending.count);
+	list_del(&rqst->node);
+
+	spin_unlock(&rtl->pending.lock);
+
+	ssh_request_put(rqst);
+}
+
+static int ssh_rtl_tx_pending_push(struct ssh_request *rqst)
+{
+	struct ssh_rtl *rtl = ssh_request_rtl(rqst);
+
+	spin_lock(&rtl->pending.lock);
+
+	if (test_bit(SSH_REQUEST_SF_LOCKED_BIT, &rqst->state)) {
+		spin_unlock(&rtl->pending.lock);
+		return -EINVAL;
+	}
+
+	if (test_and_set_bit(SSH_REQUEST_SF_PENDING_BIT, &rqst->state)) {
+		spin_unlock(&rtl->pending.lock);
+		return -EALREADY;
+	}
+
+	atomic_inc(&rtl->pending.count);
+	list_add_tail(&ssh_request_get(rqst)->node, &rtl->pending.head);
+
+	spin_unlock(&rtl->pending.lock);
+	return 0;
+}
+
+static void ssh_rtl_complete_with_status(struct ssh_request *rqst, int status)
+{
+	struct ssh_rtl *rtl = ssh_request_rtl(rqst);
+
+	trace_ssam_request_complete(rqst, status);
+
+	/* rtl/ptl may not be set if we're canceling before submitting. */
+	rtl_dbg_cond(rtl, "rtl: completing request (rqid: %#06x, status: %d)\n",
+		     ssh_request_get_rqid_safe(rqst), status);
+
+	rqst->ops->complete(rqst, NULL, NULL, status);
+}
+
+static void ssh_rtl_complete_with_rsp(struct ssh_request *rqst,
+				      const struct ssh_command *cmd,
+				      const struct ssam_span *data)
+{
+	struct ssh_rtl *rtl = ssh_request_rtl(rqst);
+
+	trace_ssam_request_complete(rqst, 0);
+
+	rtl_dbg(rtl, "rtl: completing request with response (rqid: %#06x)\n",
+		ssh_request_get_rqid(rqst));
+
+	rqst->ops->complete(rqst, cmd, data, 0);
+}
+
+static bool ssh_rtl_tx_can_process(struct ssh_request *rqst)
+{
+	struct ssh_rtl *rtl = ssh_request_rtl(rqst);
+
+	if (test_bit(SSH_REQUEST_TY_FLUSH_BIT, &rqst->state))
+		return !atomic_read(&rtl->pending.count);
+
+	return atomic_read(&rtl->pending.count) < SSH_RTL_MAX_PENDING;
+}
+
+static struct ssh_request *ssh_rtl_tx_next(struct ssh_rtl *rtl)
+{
+	struct ssh_request *rqst = ERR_PTR(-ENOENT);
+	struct ssh_request *p, *n;
+
+	spin_lock(&rtl->queue.lock);
+
+	/* Find first non-locked request and remove it. */
+	list_for_each_entry_safe(p, n, &rtl->queue.head, node) {
+		if (unlikely(test_bit(SSH_REQUEST_SF_LOCKED_BIT, &p->state)))
+			continue;
+
+		if (!ssh_rtl_tx_can_process(p)) {
+			rqst = ERR_PTR(-EBUSY);
+			break;
+		}
+
+		/* Remove from queue and mark as transmitting. */
+		set_bit(SSH_REQUEST_SF_TRANSMITTING_BIT, &p->state);
+		/* Ensure state never gets zero. */
+		smp_mb__before_atomic();
+		clear_bit(SSH_REQUEST_SF_QUEUED_BIT, &p->state);
+
+		list_del(&p->node);
+
+		rqst = p;
+		break;
+	}
+
+	spin_unlock(&rtl->queue.lock);
+	return rqst;
+}
+
+static int ssh_rtl_tx_try_process_one(struct ssh_rtl *rtl)
+{
+	struct ssh_request *rqst;
+	int status;
+
+	/* Get and prepare next request for transmit. */
+	rqst = ssh_rtl_tx_next(rtl);
+	if (IS_ERR(rqst))
+		return PTR_ERR(rqst);
+
+	/* Add it to/mark it as pending. */
+	status = ssh_rtl_tx_pending_push(rqst);
+	if (status) {
+		ssh_request_put(rqst);
+		return -EAGAIN;
+	}
+
+	/* Submit packet. */
+	status = ssh_ptl_submit(&rtl->ptl, &rqst->packet);
+	if (status == -ESHUTDOWN) {
+		/*
+		 * Packet has been refused due to the packet layer shutting
+		 * down. Complete it here.
+		 */
+		set_bit(SSH_REQUEST_SF_LOCKED_BIT, &rqst->state);
+		/*
+		 * Note: A barrier is not required here, as there are only two
+		 * references in the system at this point: The one that we have,
+		 * and the other one that belongs to the pending set. Due to the
+		 * request being marked as "transmitting", our process is the
+		 * only one allowed to remove the pending node and change the
+		 * state. Normally, the task would fall to the packet callback,
+		 * but as this is a path where submission failed, this callback
+		 * will never be executed.
+		 */
+
+		ssh_rtl_pending_remove(rqst);
+		ssh_rtl_complete_with_status(rqst, -ESHUTDOWN);
+
+		ssh_request_put(rqst);
+		return -ESHUTDOWN;
+
+	} else if (status) {
+		/*
+		 * If submitting the packet failed and the packet layer isn't
+		 * shutting down, the packet has either been submitted/queued
+		 * before (-EALREADY, which cannot happen as we have
+		 * guaranteed that requests cannot be re-submitted), or the
+		 * packet was marked as locked (-EINVAL). To mark the packet
+		 * locked at this stage, the request, and thus the packets
+		 * itself, had to have been canceled. Simply drop the
+		 * reference. Cancellation itself will remove it from the set
+		 * of pending requests.
+		 */
+
+		WARN_ON(status != -EINVAL);
+
+		ssh_request_put(rqst);
+		return -EAGAIN;
+	}
+
+	ssh_request_put(rqst);
+	return 0;
+}
+
+static bool ssh_rtl_tx_schedule(struct ssh_rtl *rtl)
+{
+	if (atomic_read(&rtl->pending.count) >= SSH_RTL_MAX_PENDING)
+		return false;
+
+	if (ssh_rtl_queue_empty(rtl))
+		return false;
+
+	return schedule_work(&rtl->tx.work);
+}
+
+static void ssh_rtl_tx_work_fn(struct work_struct *work)
+{
+	struct ssh_rtl *rtl = to_ssh_rtl(work, tx.work);
+	unsigned int iterations = SSH_RTL_TX_BATCH;
+	int status;
+
+	/*
+	 * Try to be nice and not block/live-lock the workqueue: Run a maximum
+	 * of 10 tries, then re-submit if necessary. This should not be
+	 * necessary for normal execution, but guarantee it anyway.
+	 */
+	do {
+		status = ssh_rtl_tx_try_process_one(rtl);
+		if (status == -ENOENT || status == -EBUSY)
+			return;		/* No more requests to process. */
+
+		if (status == -ESHUTDOWN) {
+			/*
+			 * Packet system shutting down. No new packets can be
+			 * transmitted. Return silently, the party initiating
+			 * the shutdown should handle the rest.
+			 */
+			return;
+		}
+
+		WARN_ON(status != 0 && status != -EAGAIN);
+	} while (--iterations);
+
+	/* Out of tries, reschedule. */
+	ssh_rtl_tx_schedule(rtl);
+}
+
+/**
+ * ssh_rtl_submit() - Submit a request to the transport layer.
+ * @rtl:  The request transport layer.
+ * @rqst: The request to submit.
+ *
+ * Submits a request to the transport layer. A single request may not be
+ * submitted multiple times without reinitializing it.
+ *
+ * Return: Returns zero on success, %-EINVAL if the request type is invalid or
+ * the request has been canceled prior to submission, %-EALREADY if the
+ * request has already been submitted, or %-ESHUTDOWN in case the request
+ * transport layer has been shut down.
+ */
+int ssh_rtl_submit(struct ssh_rtl *rtl, struct ssh_request *rqst)
+{
+	trace_ssam_request_submit(rqst);
+
+	/*
+	 * Ensure that requests expecting a response are sequenced. If this
+	 * invariant ever changes, see the comment in ssh_rtl_complete() on what
+	 * is required to be changed in the code.
+	 */
+	if (test_bit(SSH_REQUEST_TY_HAS_RESPONSE_BIT, &rqst->state))
+		if (!test_bit(SSH_PACKET_TY_SEQUENCED_BIT, &rqst->packet.state))
+			return -EINVAL;
+
+	spin_lock(&rtl->queue.lock);
+
+	/*
+	 * Try to set ptl and check if this request has already been submitted.
+	 *
+	 * Must be inside lock as we might run into a lost update problem
+	 * otherwise: If this were outside of the lock, cancellation in
+	 * ssh_rtl_cancel_nonpending() may run after we've set the ptl
+	 * reference but before we enter the lock. In that case, we'd detect
+	 * that the request is being added to the queue and would try to remove
+	 * it from that, but removal might fail because it hasn't actually been
+	 * added yet. By putting this cmpxchg in the critical section, we
+	 * ensure that the queuing detection only triggers when we are already
+	 * in the critical section and the remove process will wait until the
+	 * push operation has been completed (via lock) due to that. Only then,
+	 * we can safely try to remove it.
+	 */
+	if (cmpxchg(&rqst->packet.ptl, NULL, &rtl->ptl)) {
+		spin_unlock(&rtl->queue.lock);
+		return -EALREADY;
+	}
+
+	/*
+	 * Ensure that we set ptl reference before we continue modifying state.
+	 * This is required for non-pending cancellation. This barrier is paired
+	 * with the one in ssh_rtl_cancel_nonpending().
+	 *
+	 * By setting the ptl reference before we test for "locked", we can
+	 * check if the "locked" test may have already run. See comments in
+	 * ssh_rtl_cancel_nonpending() for more detail.
+	 */
+	smp_mb__after_atomic();
+
+	if (test_bit(SSH_RTL_SF_SHUTDOWN_BIT, &rtl->state)) {
+		spin_unlock(&rtl->queue.lock);
+		return -ESHUTDOWN;
+	}
+
+	if (test_bit(SSH_REQUEST_SF_LOCKED_BIT, &rqst->state)) {
+		spin_unlock(&rtl->queue.lock);
+		return -EINVAL;
+	}
+
+	set_bit(SSH_REQUEST_SF_QUEUED_BIT, &rqst->state);
+	list_add_tail(&ssh_request_get(rqst)->node, &rtl->queue.head);
+
+	spin_unlock(&rtl->queue.lock);
+
+	ssh_rtl_tx_schedule(rtl);
+	return 0;
+}
+
+static void ssh_rtl_timeout_reaper_mod(struct ssh_rtl *rtl, ktime_t now,
+				       ktime_t expires)
+{
+	unsigned long delta = msecs_to_jiffies(ktime_ms_delta(expires, now));
+	ktime_t aexp = ktime_add(expires, SSH_RTL_REQUEST_TIMEOUT_RESOLUTION);
+
+	spin_lock(&rtl->rtx_timeout.lock);
+
+	/* Re-adjust / schedule reaper only if it is above resolution delta. */
+	if (ktime_before(aexp, rtl->rtx_timeout.expires)) {
+		rtl->rtx_timeout.expires = expires;
+		mod_delayed_work(system_wq, &rtl->rtx_timeout.reaper, delta);
+	}
+
+	spin_unlock(&rtl->rtx_timeout.lock);
+}
+
+static void ssh_rtl_timeout_start(struct ssh_request *rqst)
+{
+	struct ssh_rtl *rtl = ssh_request_rtl(rqst);
+	ktime_t timestamp = ktime_get_coarse_boottime();
+	ktime_t timeout = rtl->rtx_timeout.timeout;
+
+	if (test_bit(SSH_REQUEST_SF_LOCKED_BIT, &rqst->state))
+		return;
+
+	/*
+	 * Note: The timestamp gets set only once. This happens on the packet
+	 * callback. All other access to it is read-only.
+	 */
+	WRITE_ONCE(rqst->timestamp, timestamp);
+	/*
+	 * Ensure timestamp is set before starting the reaper. Paired with
+	 * implicit barrier following check on ssh_request_get_expiration() in
+	 * ssh_rtl_timeout_reap.
+	 */
+	smp_mb__after_atomic();
+
+	ssh_rtl_timeout_reaper_mod(rtl, timestamp, timestamp + timeout);
+}
+
+static void ssh_rtl_complete(struct ssh_rtl *rtl,
+			     const struct ssh_command *command,
+			     const struct ssam_span *command_data)
+{
+	struct ssh_request *r = NULL;
+	struct ssh_request *p, *n;
+	u16 rqid = get_unaligned_le16(&command->rqid);
+
+	trace_ssam_rx_response_received(command, command_data->len);
+
+	/*
+	 * Get request from pending based on request ID and mark it as response
+	 * received and locked.
+	 */
+	spin_lock(&rtl->pending.lock);
+	list_for_each_entry_safe(p, n, &rtl->pending.head, node) {
+		/* We generally expect requests to be processed in order. */
+		if (unlikely(ssh_request_get_rqid(p) != rqid))
+			continue;
+
+		/* Simulate response timeout. */
+		if (ssh_rtl_should_drop_response()) {
+			spin_unlock(&rtl->pending.lock);
+
+			trace_ssam_ei_rx_drop_response(p);
+			rtl_info(rtl, "request error injection: dropping response for request %p\n",
+				 &p->packet);
+			return;
+		}
+
+		/*
+		 * Mark as "response received" and "locked" as we're going to
+		 * complete it.
+		 */
+		set_bit(SSH_REQUEST_SF_LOCKED_BIT, &p->state);
+		set_bit(SSH_REQUEST_SF_RSPRCVD_BIT, &p->state);
+		/* Ensure state never gets zero. */
+		smp_mb__before_atomic();
+		clear_bit(SSH_REQUEST_SF_PENDING_BIT, &p->state);
+
+		atomic_dec(&rtl->pending.count);
+		list_del(&p->node);
+
+		r = p;
+		break;
+	}
+	spin_unlock(&rtl->pending.lock);
+
+	if (!r) {
+		rtl_warn(rtl, "rtl: dropping unexpected command message (rqid = %#06x)\n",
+			 rqid);
+		return;
+	}
+
+	/* If the request hasn't been completed yet, we will do this now. */
+	if (test_and_set_bit(SSH_REQUEST_SF_COMPLETED_BIT, &r->state)) {
+		ssh_request_put(r);
+		ssh_rtl_tx_schedule(rtl);
+		return;
+	}
+
+	/*
+	 * Make sure the request has been transmitted. In case of a sequenced
+	 * request, we are guaranteed that the completion callback will run on
+	 * the receiver thread directly when the ACK for the packet has been
+	 * received. Similarly, this function is guaranteed to run on the
+	 * receiver thread. Thus we are guaranteed that if the packet has been
+	 * successfully transmitted and received an ACK, the transmitted flag
+	 * has been set and is visible here.
+	 *
+	 * We are currently not handling unsequenced packets here, as those
+	 * should never expect a response as ensured in ssh_rtl_submit. If this
+	 * ever changes, one would have to test for
+	 *
+	 *	(r->state & (transmitting | transmitted))
+	 *
+	 * on unsequenced packets to determine if they could have been
+	 * transmitted. There are no synchronization guarantees as in the
+	 * sequenced case, since, in this case, the callback function will not
+	 * run on the same thread. Thus an exact determination is impossible.
+	 */
+	if (!test_bit(SSH_REQUEST_SF_TRANSMITTED_BIT, &r->state)) {
+		rtl_err(rtl, "rtl: received response before ACK for request (rqid = %#06x)\n",
+			rqid);
+
+		/*
+		 * NB: Timeout has already been canceled, request already been
+		 * removed from pending and marked as locked and completed. As
+		 * we receive a "false" response, the packet might still be
+		 * queued though.
+		 */
+		ssh_rtl_queue_remove(r);
+
+		ssh_rtl_complete_with_status(r, -EREMOTEIO);
+		ssh_request_put(r);
+
+		ssh_rtl_tx_schedule(rtl);
+		return;
+	}
+
+	/*
+	 * NB: Timeout has already been canceled, request already been
+	 * removed from pending and marked as locked and completed. The request
+	 * can also not be queued any more, as it has been marked as
+	 * transmitting and later transmitted. Thus no need to remove it from
+	 * anywhere.
+	 */
+
+	ssh_rtl_complete_with_rsp(r, command, command_data);
+	ssh_request_put(r);
+
+	ssh_rtl_tx_schedule(rtl);
+}
+
+static bool ssh_rtl_cancel_nonpending(struct ssh_request *r)
+{
+	struct ssh_rtl *rtl;
+	unsigned long flags, fixed;
+	bool remove;
+
+	/*
+	 * Handle unsubmitted request: Try to mark the packet as locked,
+	 * expecting the state to be zero (i.e. unsubmitted). Note that, if
+	 * setting the state worked, we might still be adding the packet to the
+	 * queue in a currently executing submit call. In that case, however,
+	 * ptl reference must have been set previously, as locked is checked
+	 * after setting ptl. Furthermore, when the ptl reference is set, the
+	 * submission process is guaranteed to have entered the critical
+	 * section. Thus only if we successfully locked this request and ptl is
+	 * NULL, we have successfully removed the request, i.e. we are
+	 * guaranteed that, due to the "locked" check in ssh_rtl_submit(), the
+	 * packet will never be added. Otherwise, we need to try and grab it
+	 * from the queue, where we are now guaranteed that the packet is or has
+	 * been due to the critical section.
+	 *
+	 * Note that if the cmpxchg() fails, we are guaranteed that ptl has
+	 * been set and is non-NULL, as states can only be nonzero after this
+	 * has been set. Also note that we need to fetch the static (type)
+	 * flags to ensure that they don't cause the cmpxchg() to fail.
+	 */
+	fixed = READ_ONCE(r->state) & SSH_REQUEST_FLAGS_TY_MASK;
+	flags = cmpxchg(&r->state, fixed, SSH_REQUEST_SF_LOCKED_BIT);
+
+	/*
+	 * Force correct ordering with regards to state and ptl reference access
+	 * to safe-guard cancellation to concurrent submission against a
+	 * lost-update problem. First try to exchange state, then also check
+	 * ptl if that worked. This barrier is paired with the
+	 * one in ssh_rtl_submit().
+	 */
+	smp_mb__after_atomic();
+
+	if (flags == fixed && !READ_ONCE(r->packet.ptl)) {
+		if (test_and_set_bit(SSH_REQUEST_SF_COMPLETED_BIT, &r->state))
+			return true;
+
+		ssh_rtl_complete_with_status(r, -ECANCELED);
+		return true;
+	}
+
+	rtl = ssh_request_rtl(r);
+	spin_lock(&rtl->queue.lock);
+
+	/*
+	 * Note: 1) Requests cannot be re-submitted. 2) If a request is
+	 * queued, it cannot be "transmitting"/"pending" yet. Thus, if we
+	 * successfully remove the request here, we have removed all its
+	 * occurrences in the system.
+	 */
+
+	remove = test_and_clear_bit(SSH_REQUEST_SF_QUEUED_BIT, &r->state);
+	if (!remove) {
+		spin_unlock(&rtl->queue.lock);
+		return false;
+	}
+
+	set_bit(SSH_REQUEST_SF_LOCKED_BIT, &r->state);
+	list_del(&r->node);
+
+	spin_unlock(&rtl->queue.lock);
+
+	ssh_request_put(r);	/* Drop reference obtained from queue. */
+
+	if (test_and_set_bit(SSH_REQUEST_SF_COMPLETED_BIT, &r->state))
+		return true;
+
+	ssh_rtl_complete_with_status(r, -ECANCELED);
+	return true;
+}
+
+static bool ssh_rtl_cancel_pending(struct ssh_request *r)
+{
+	/* If the packet is already locked, it's going to be removed shortly. */
+	if (test_and_set_bit(SSH_REQUEST_SF_LOCKED_BIT, &r->state))
+		return true;
+
+	/*
+	 * Now that we have locked the packet, we have guaranteed that it can't
+	 * be added to the system any more. If ptl is NULL, the locked
+	 * check in ssh_rtl_submit() has not been run and any submission,
+	 * currently in progress or called later, won't add the packet. Thus we
+	 * can directly complete it.
+	 *
+	 * The implicit memory barrier of test_and_set_bit() should be enough
+	 * to ensure that the correct order (first lock, then check ptl) is
+	 * ensured. This is paired with the barrier in ssh_rtl_submit().
+	 */
+	if (!READ_ONCE(r->packet.ptl)) {
+		if (test_and_set_bit(SSH_REQUEST_SF_COMPLETED_BIT, &r->state))
+			return true;
+
+		ssh_rtl_complete_with_status(r, -ECANCELED);
+		return true;
+	}
+
+	/*
+	 * Try to cancel the packet. If the packet has not been completed yet,
+	 * this will subsequently (and synchronously) call the completion
+	 * callback of the packet, which will complete the request.
+	 */
+	ssh_ptl_cancel(&r->packet);
+
+	/*
+	 * If the packet has been completed with success, i.e. has not been
+	 * canceled by the above call, the request may not have been completed
+	 * yet (may be waiting for a response). Check if we need to do this
+	 * here.
+	 */
+	if (test_and_set_bit(SSH_REQUEST_SF_COMPLETED_BIT, &r->state))
+		return true;
+
+	ssh_rtl_queue_remove(r);
+	ssh_rtl_pending_remove(r);
+	ssh_rtl_complete_with_status(r, -ECANCELED);
+
+	return true;
+}
+
+/**
+ * ssh_rtl_cancel() - Cancel request.
+ * @rqst:    The request to cancel.
+ * @pending: Whether to also cancel pending requests.
+ *
+ * Cancels the given request. If @pending is %false, this will not cancel
+ * pending requests, i.e. requests that have already been submitted to the
+ * packet layer but not been completed yet. If @pending is %true, this will
+ * cancel the given request regardless of the state it is in.
+ *
+ * If the request has been canceled by calling this function, both completion
+ * and release callbacks of the request will be executed in a reasonable
+ * time-frame. This may happen during execution of this function, however,
+ * there is no guarantee for this. For example, a request currently
+ * transmitting will be canceled/completed only after transmission has
+ * completed, and the respective callbacks will be executed on the transmitter
+ * thread, which may happen during, but also some time after execution of the
+ * cancel function.
+ *
+ * Return: Returns %true if the given request has been canceled or completed,
+ * either by this function or prior to calling this function, %false
+ * otherwise. If @pending is %true, this function will always return %true.
+ */
+bool ssh_rtl_cancel(struct ssh_request *rqst, bool pending)
+{
+	struct ssh_rtl *rtl;
+	bool canceled;
+
+	if (test_and_set_bit(SSH_REQUEST_SF_CANCELED_BIT, &rqst->state))
+		return true;
+
+	trace_ssam_request_cancel(rqst);
+
+	if (pending)
+		canceled = ssh_rtl_cancel_pending(rqst);
+	else
+		canceled = ssh_rtl_cancel_nonpending(rqst);
+
+	/* Note: rtl may be NULL if request has not been submitted yet. */
+	rtl = ssh_request_rtl(rqst);
+	if (canceled && rtl)
+		ssh_rtl_tx_schedule(rtl);
+
+	return canceled;
+}
+
+static void ssh_rtl_packet_callback(struct ssh_packet *p, int status)
+{
+	struct ssh_request *r = to_ssh_request(p);
+
+	if (unlikely(status)) {
+		set_bit(SSH_REQUEST_SF_LOCKED_BIT, &r->state);
+
+		if (test_and_set_bit(SSH_REQUEST_SF_COMPLETED_BIT, &r->state))
+			return;
+
+		/*
+		 * The packet may get canceled even though it has not been
+		 * submitted yet. The request may still be queued. Check the
+		 * queue and remove it if necessary. As the timeout would have
+		 * been started in this function on success, there's no need
+		 * to cancel it here.
+		 */
+		ssh_rtl_queue_remove(r);
+		ssh_rtl_pending_remove(r);
+		ssh_rtl_complete_with_status(r, status);
+
+		ssh_rtl_tx_schedule(ssh_request_rtl(r));
+		return;
+	}
+
+	/* Update state: Mark as transmitted and clear transmitting. */
+	set_bit(SSH_REQUEST_SF_TRANSMITTED_BIT, &r->state);
+	/* Ensure state never gets zero. */
+	smp_mb__before_atomic();
+	clear_bit(SSH_REQUEST_SF_TRANSMITTING_BIT, &r->state);
+
+	/* If we expect a response, we just need to start the timeout. */
+	if (test_bit(SSH_REQUEST_TY_HAS_RESPONSE_BIT, &r->state)) {
+		/*
+		 * Note: This is the only place where the timestamp gets set,
+		 * all other access to it is read-only.
+		 */
+		ssh_rtl_timeout_start(r);
+		return;
+	}
+
+	/*
+	 * If we don't expect a response, lock, remove, and complete the
+	 * request. Note that, at this point, the request is guaranteed to have
+	 * left the queue and no timeout has been started. Thus we only need to
+	 * remove it from pending. If the request has already been completed (it
+	 * may have been canceled) return.
+	 */
+
+	set_bit(SSH_REQUEST_SF_LOCKED_BIT, &r->state);
+	if (test_and_set_bit(SSH_REQUEST_SF_COMPLETED_BIT, &r->state))
+		return;
+
+	ssh_rtl_pending_remove(r);
+	ssh_rtl_complete_with_status(r, 0);
+
+	ssh_rtl_tx_schedule(ssh_request_rtl(r));
+}
+
+static ktime_t ssh_request_get_expiration(struct ssh_request *r, ktime_t timeout)
+{
+	ktime_t timestamp = READ_ONCE(r->timestamp);
+
+	if (timestamp != KTIME_MAX)
+		return ktime_add(timestamp, timeout);
+	else
+		return KTIME_MAX;
+}
+
+static void ssh_rtl_timeout_reap(struct work_struct *work)
+{
+	struct ssh_rtl *rtl = to_ssh_rtl(work, rtx_timeout.reaper.work);
+	struct ssh_request *r, *n;
+	LIST_HEAD(claimed);
+	ktime_t now = ktime_get_coarse_boottime();
+	ktime_t timeout = rtl->rtx_timeout.timeout;
+	ktime_t next = KTIME_MAX;
+
+	trace_ssam_rtl_timeout_reap(atomic_read(&rtl->pending.count));
+
+	/*
+	 * Mark reaper as "not pending". This is done before checking any
+	 * requests to avoid lost-update type problems.
+	 */
+	spin_lock(&rtl->rtx_timeout.lock);
+	rtl->rtx_timeout.expires = KTIME_MAX;
+	spin_unlock(&rtl->rtx_timeout.lock);
+
+	spin_lock(&rtl->pending.lock);
+	list_for_each_entry_safe(r, n, &rtl->pending.head, node) {
+		ktime_t expires = ssh_request_get_expiration(r, timeout);
+
+		/*
+		 * Check if the timeout hasn't expired yet. Find out next
+		 * expiration date to be handled after this run.
+		 */
+		if (ktime_after(expires, now)) {
+			next = ktime_before(expires, next) ? expires : next;
+			continue;
+		}
+
+		/* Avoid further transitions if locked. */
+		if (test_and_set_bit(SSH_REQUEST_SF_LOCKED_BIT, &r->state))
+			continue;
+
+		/*
+		 * We have now marked the packet as locked. Thus it cannot be
+		 * added to the pending or queued lists again after we've
+		 * removed it here. We can therefore re-use the node of this
+		 * packet temporarily.
+		 */
+
+		clear_bit(SSH_REQUEST_SF_PENDING_BIT, &r->state);
+
+		atomic_dec(&rtl->pending.count);
+		list_del(&r->node);
+
+		list_add_tail(&r->node, &claimed);
+	}
+	spin_unlock(&rtl->pending.lock);
+
+	/* Cancel and complete the request. */
+	list_for_each_entry_safe(r, n, &claimed, node) {
+		trace_ssam_request_timeout(r);
+
+		/*
+		 * At this point we've removed the packet from pending. This
+		 * means that we've obtained the last (only) reference of the
+		 * system to it. Thus we can just complete it.
+		 */
+		if (!test_and_set_bit(SSH_REQUEST_SF_COMPLETED_BIT, &r->state))
+			ssh_rtl_complete_with_status(r, -ETIMEDOUT);
+
+		/*
+		 * Drop the reference we've obtained by removing it from the
+		 * pending set.
+		 */
+		list_del(&r->node);
+		ssh_request_put(r);
+	}
+
+	/* Ensure that the reaper doesn't run again immediately. */
+	next = max(next, ktime_add(now, SSH_RTL_REQUEST_TIMEOUT_RESOLUTION));
+	if (next != KTIME_MAX)
+		ssh_rtl_timeout_reaper_mod(rtl, now, next);
+
+	ssh_rtl_tx_schedule(rtl);
+}
+
+static void ssh_rtl_rx_event(struct ssh_rtl *rtl, const struct ssh_command *cmd,
+			     const struct ssam_span *data)
+{
+	trace_ssam_rx_event_received(cmd, data->len);
+
+	rtl_dbg(rtl, "rtl: handling event (rqid: %#06x)\n",
+		get_unaligned_le16(&cmd->rqid));
+
+	rtl->ops.handle_event(rtl, cmd, data);
+}
+
+static void ssh_rtl_rx_command(struct ssh_ptl *p, const struct ssam_span *data)
+{
+	struct ssh_rtl *rtl = to_ssh_rtl(p, ptl);
+	struct device *dev = &p->serdev->dev;
+	struct ssh_command *command;
+	struct ssam_span command_data;
+
+	if (sshp_parse_command(dev, data, &command, &command_data))
+		return;
+
+	if (ssh_rqid_is_event(get_unaligned_le16(&command->rqid)))
+		ssh_rtl_rx_event(rtl, command, &command_data);
+	else
+		ssh_rtl_complete(rtl, command, &command_data);
+}
+
+static void ssh_rtl_rx_data(struct ssh_ptl *p, const struct ssam_span *data)
+{
+	if (!data->len) {
+		ptl_err(p, "rtl: rx: no data frame payload\n");
+		return;
+	}
+
+	switch (data->ptr[0]) {
+	case SSH_PLD_TYPE_CMD:
+		ssh_rtl_rx_command(p, data);
+		break;
+
+	default:
+		ptl_err(p, "rtl: rx: unknown frame payload type (type: %#04x)\n",
+			data->ptr[0]);
+		break;
+	}
+}
+
+static void ssh_rtl_packet_release(struct ssh_packet *p)
+{
+	struct ssh_request *rqst;
+
+	rqst = to_ssh_request(p);
+	rqst->ops->release(rqst);
+}
+
+static const struct ssh_packet_ops ssh_rtl_packet_ops = {
+	.complete = ssh_rtl_packet_callback,
+	.release = ssh_rtl_packet_release,
+};
+
+/**
+ * ssh_request_init() - Initialize SSH request.
+ * @rqst:  The request to initialize.
+ * @flags: Request flags, determining the type of the request.
+ * @ops:   Request operations.
+ *
+ * Initializes the given SSH request and underlying packet. Sets the message
+ * buffer pointer to %NULL and the message buffer length to zero. This buffer
+ * has to be set separately via ssh_request_set_data() before submission and
+ * must contain a valid SSH request message.
+ *
+ * Return: Returns zero on success or %-EINVAL if the given flags are invalid.
+ */
+int ssh_request_init(struct ssh_request *rqst, enum ssam_request_flags flags,
+		     const struct ssh_request_ops *ops)
+{
+	unsigned long type = BIT(SSH_PACKET_TY_BLOCKING_BIT);
+
+	/* Unsequenced requests cannot have a response. */
+	if (flags & SSAM_REQUEST_UNSEQUENCED && flags & SSAM_REQUEST_HAS_RESPONSE)
+		return -EINVAL;
+
+	if (!(flags & SSAM_REQUEST_UNSEQUENCED))
+		type |= BIT(SSH_PACKET_TY_SEQUENCED_BIT);
+
+	ssh_packet_init(&rqst->packet, type, SSH_PACKET_PRIORITY(DATA, 0),
+			&ssh_rtl_packet_ops);
+
+	INIT_LIST_HEAD(&rqst->node);
+
+	rqst->state = 0;
+	if (flags & SSAM_REQUEST_HAS_RESPONSE)
+		rqst->state |= BIT(SSH_REQUEST_TY_HAS_RESPONSE_BIT);
+
+	rqst->timestamp = KTIME_MAX;
+	rqst->ops = ops;
+
+	return 0;
+}
+
+/**
+ * ssh_rtl_init() - Initialize request transport layer.
+ * @rtl:    The request transport layer to initialize.
+ * @serdev: The underlying serial device, i.e. the lower-level transport.
+ * @ops:    Request transport layer operations.
+ *
+ * Initializes the given request transport layer and associated packet
+ * transport layer. Transmitter and receiver threads must be started
+ * separately via ssh_rtl_start(), after the request-layer has been
+ * initialized and the lower-level serial device layer has been set up.
+ *
+ * Return: Returns zero on success and a nonzero error code on failure.
+ */
+int ssh_rtl_init(struct ssh_rtl *rtl, struct serdev_device *serdev,
+		 const struct ssh_rtl_ops *ops)
+{
+	struct ssh_ptl_ops ptl_ops;
+	int status;
+
+	ptl_ops.data_received = ssh_rtl_rx_data;
+
+	status = ssh_ptl_init(&rtl->ptl, serdev, &ptl_ops);
+	if (status)
+		return status;
+
+	spin_lock_init(&rtl->queue.lock);
+	INIT_LIST_HEAD(&rtl->queue.head);
+
+	spin_lock_init(&rtl->pending.lock);
+	INIT_LIST_HEAD(&rtl->pending.head);
+	atomic_set_release(&rtl->pending.count, 0);
+
+	INIT_WORK(&rtl->tx.work, ssh_rtl_tx_work_fn);
+
+	spin_lock_init(&rtl->rtx_timeout.lock);
+	rtl->rtx_timeout.timeout = SSH_RTL_REQUEST_TIMEOUT;
+	rtl->rtx_timeout.expires = KTIME_MAX;
+	INIT_DELAYED_WORK(&rtl->rtx_timeout.reaper, ssh_rtl_timeout_reap);
+
+	rtl->ops = *ops;
+
+	return 0;
+}
+
+/**
+ * ssh_rtl_destroy() - Deinitialize request transport layer.
+ * @rtl: The request transport layer to deinitialize.
+ *
+ * Deinitializes the given request transport layer and frees resources
+ * associated with it. If receiver and/or transmitter threads have been
+ * started, the layer must first be shut down via ssh_rtl_shutdown() before
+ * this function can be called.
+ */
+void ssh_rtl_destroy(struct ssh_rtl *rtl)
+{
+	ssh_ptl_destroy(&rtl->ptl);
+}
+
+/**
+ * ssh_rtl_start() - Start request transmitter and receiver.
+ * @rtl: The request transport layer.
+ *
+ * Return: Returns zero on success, a negative error code on failure.
+ */
+int ssh_rtl_start(struct ssh_rtl *rtl)
+{
+	int status;
+
+	status = ssh_ptl_tx_start(&rtl->ptl);
+	if (status)
+		return status;
+
+	ssh_rtl_tx_schedule(rtl);
+
+	status = ssh_ptl_rx_start(&rtl->ptl);
+	if (status) {
+		ssh_rtl_flush(rtl, msecs_to_jiffies(5000));
+		ssh_ptl_tx_stop(&rtl->ptl);
+		return status;
+	}
+
+	return 0;
+}
+
+struct ssh_flush_request {
+	struct ssh_request base;
+	struct completion completion;
+	int status;
+};
+
+static void ssh_rtl_flush_request_complete(struct ssh_request *r,
+					   const struct ssh_command *cmd,
+					   const struct ssam_span *data,
+					   int status)
+{
+	struct ssh_flush_request *rqst;
+
+	rqst = container_of(r, struct ssh_flush_request, base);
+	rqst->status = status;
+}
+
+static void ssh_rtl_flush_request_release(struct ssh_request *r)
+{
+	struct ssh_flush_request *rqst;
+
+	rqst = container_of(r, struct ssh_flush_request, base);
+	complete_all(&rqst->completion);
+}
+
+static const struct ssh_request_ops ssh_rtl_flush_request_ops = {
+	.complete = ssh_rtl_flush_request_complete,
+	.release = ssh_rtl_flush_request_release,
+};
+
+/**
+ * ssh_rtl_flush() - Flush the request transport layer.
+ * @rtl:     request transport layer
+ * @timeout: timeout for the flush operation in jiffies
+ *
+ * Queue a special flush request and wait for its completion. This request
+ * will be completed after all other currently queued and pending requests
+ * have been completed. Instead of a normal data packet, this request submits
+ * a special flush packet, meaning that upon completion, also the underlying
+ * packet transport layer has been flushed.
+ *
+ * Flushing the request layer guarantees that all previously submitted
+ * requests have been fully completed before this call returns. Additionally,
+ * flushing blocks execution of all later submitted requests until the flush
+ * has been completed.
+ *
+ * If the caller ensures that no new requests are submitted after a call to
+ * this function, the request transport layer is guaranteed to have no
+ * remaining requests when this call returns. The same guarantee does not hold
+ * for the packet layer, on which control packets may still be queued after
+ * this call.
+ *
+ * Return: Returns zero on success, %-ETIMEDOUT if the flush timed out and has
+ * been canceled as a result of the timeout, or %-ESHUTDOWN if the packet
+ * and/or request transport layer has been shut down before this call. May
+ * also return %-EINTR if the underlying packet transmission has been
+ * interrupted.
+ */
+int ssh_rtl_flush(struct ssh_rtl *rtl, unsigned long timeout)
+{
+	const unsigned int init_flags = SSAM_REQUEST_UNSEQUENCED;
+	struct ssh_flush_request rqst;
+	int status;
+
+	ssh_request_init(&rqst.base, init_flags, &ssh_rtl_flush_request_ops);
+	rqst.base.packet.state |= BIT(SSH_PACKET_TY_FLUSH_BIT);
+	rqst.base.packet.priority = SSH_PACKET_PRIORITY(FLUSH, 0);
+	rqst.base.state |= BIT(SSH_REQUEST_TY_FLUSH_BIT);
+
+	init_completion(&rqst.completion);
+
+	status = ssh_rtl_submit(rtl, &rqst.base);
+	if (status)
+		return status;
+
+	ssh_request_put(&rqst.base);
+
+	if (!wait_for_completion_timeout(&rqst.completion, timeout)) {
+		ssh_rtl_cancel(&rqst.base, true);
+		wait_for_completion(&rqst.completion);
+	}
+
+	WARN_ON(rqst.status != 0 && rqst.status != -ECANCELED &&
+		rqst.status != -ESHUTDOWN && rqst.status != -EINTR);
+
+	return rqst.status == -ECANCELED ? -ETIMEDOUT : rqst.status;
+}
+
+/**
+ * ssh_rtl_shutdown() - Shut down request transport layer.
+ * @rtl: The request transport layer.
+ *
+ * Shuts down the request transport layer, removing and canceling all queued
+ * and pending requests. Requests canceled by this operation will be completed
+ * with %-ESHUTDOWN as status. Receiver and transmitter threads will be
+ * stopped, the lower-level packet layer will be shutdown.
+ *
+ * As a result of this function, the transport layer will be marked as shut
+ * down. Submission of requests after the transport layer has been shut down
+ * will fail with %-ESHUTDOWN.
+ */
+void ssh_rtl_shutdown(struct ssh_rtl *rtl)
+{
+	struct ssh_request *r, *n;
+	LIST_HEAD(claimed);
+	int pending;
+
+	set_bit(SSH_RTL_SF_SHUTDOWN_BIT, &rtl->state);
+	/*
+	 * Ensure that the layer gets marked as shut-down before actually
+	 * stopping it. In combination with the check in ssh_rtl_submit(),
+	 * this guarantees that no new requests can be added and all already
+	 * queued requests are properly canceled.
+	 */
+	smp_mb__after_atomic();
+
+	/* Remove requests from queue. */
+	spin_lock(&rtl->queue.lock);
+	list_for_each_entry_safe(r, n, &rtl->queue.head, node) {
+		set_bit(SSH_REQUEST_SF_LOCKED_BIT, &r->state);
+		/* Ensure state never gets zero. */
+		smp_mb__before_atomic();
+		clear_bit(SSH_REQUEST_SF_QUEUED_BIT, &r->state);
+
+		list_del(&r->node);
+		list_add_tail(&r->node, &claimed);
+	}
+	spin_unlock(&rtl->queue.lock);
+
+	/*
+	 * We have now guaranteed that the queue is empty and no more new
+	 * requests can be submitted (i.e. it will stay empty). This means that
+	 * calling ssh_rtl_tx_schedule() will not schedule tx.work any more. So
+	 * we can simply call cancel_work_sync() on tx.work here and when that
+	 * returns, we've locked it down. This also means that after this call,
+	 * we don't submit any more packets to the underlying packet layer, so
+	 * we can also shut that down.
+	 */
+
+	cancel_work_sync(&rtl->tx.work);
+	ssh_ptl_shutdown(&rtl->ptl);
+	cancel_delayed_work_sync(&rtl->rtx_timeout.reaper);
+
+	/*
+	 * Shutting down the packet layer should also have canceled all
+	 * requests. Thus the pending set should be empty. Attempt to handle
+	 * this gracefully anyways, even though this should be dead code.
+	 */
+
+	pending = atomic_read(&rtl->pending.count);
+	if (WARN_ON(pending)) {
+		spin_lock(&rtl->pending.lock);
+		list_for_each_entry_safe(r, n, &rtl->pending.head, node) {
+			set_bit(SSH_REQUEST_SF_LOCKED_BIT, &r->state);
+			/* Ensure state never gets zero. */
+			smp_mb__before_atomic();
+			clear_bit(SSH_REQUEST_SF_PENDING_BIT, &r->state);
+
+			list_del(&r->node);
+			list_add_tail(&r->node, &claimed);
+		}
+		spin_unlock(&rtl->pending.lock);
+	}
+
+	/* Finally, cancel and complete the requests we claimed before. */
+	list_for_each_entry_safe(r, n, &claimed, node) {
+		/*
+		 * We need test_and_set() because we still might compete with
+		 * cancellation.
+		 */
+		if (!test_and_set_bit(SSH_REQUEST_SF_COMPLETED_BIT, &r->state))
+			ssh_rtl_complete_with_status(r, -ESHUTDOWN);
+
+		/*
+		 * Drop the reference we've obtained by removing it from the
+		 * lists.
+		 */
+		list_del(&r->node);
+		ssh_request_put(r);
+	}
+}
diff --git a/drivers/platform/surface/aggregator/ssh_request_layer.h b/drivers/platform/surface/aggregator/ssh_request_layer.h
new file mode 100644
index 000000000000..cb35815858d1
--- /dev/null
+++ b/drivers/platform/surface/aggregator/ssh_request_layer.h
@@ -0,0 +1,143 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * SSH request transport layer.
+ *
+ * Copyright (C) 2019-2020 Maximilian Luz <luzmaximilian@gmail.com>
+ */
+
+#ifndef _SURFACE_AGGREGATOR_SSH_REQUEST_LAYER_H
+#define _SURFACE_AGGREGATOR_SSH_REQUEST_LAYER_H
+
+#include <linux/atomic.h>
+#include <linux/ktime.h>
+#include <linux/list.h>
+#include <linux/spinlock.h>
+#include <linux/workqueue.h>
+
+#include <linux/surface_aggregator/serial_hub.h>
+#include <linux/surface_aggregator/controller.h>
+
+#include "ssh_packet_layer.h"
+
+/**
+ * enum ssh_rtl_state_flags - State-flags for &struct ssh_rtl.
+ *
+ * @SSH_RTL_SF_SHUTDOWN_BIT:
+ *	Indicates that the request transport layer has been shut down or is
+ *	being shut down and should not accept any new requests.
+ */
+enum ssh_rtl_state_flags {
+	SSH_RTL_SF_SHUTDOWN_BIT,
+};
+
+/**
+ * struct ssh_rtl_ops - Callback operations for request transport layer.
+ * @handle_event: Function called when a SSH event has been received. The
+ *                specified function takes the request layer, received command
+ *                struct, and corresponding payload as arguments. If the event
+ *                has no payload, the payload span is empty (not %NULL).
+ */
+struct ssh_rtl_ops {
+	void (*handle_event)(struct ssh_rtl *rtl, const struct ssh_command *cmd,
+			     const struct ssam_span *data);
+};
+
+/**
+ * struct ssh_rtl - SSH request transport layer.
+ * @ptl:           Underlying packet transport layer.
+ * @state:         State(-flags) of the transport layer.
+ * @queue:         Request submission queue.
+ * @queue.lock:    Lock for modifying the request submission queue.
+ * @queue.head:    List-head of the request submission queue.
+ * @pending:       Set/list of pending requests.
+ * @pending.lock:  Lock for modifying the request set.
+ * @pending.head:  List-head of the pending set/list.
+ * @pending.count: Number of currently pending requests.
+ * @tx:            Transmitter subsystem.
+ * @tx.work:       Transmitter work item.
+ * @rtx_timeout:   Retransmission timeout subsystem.
+ * @rtx_timeout.lock:    Lock for modifying the retransmission timeout reaper.
+ * @rtx_timeout.timeout: Timeout interval for retransmission.
+ * @rtx_timeout.expires: Time specifying when the reaper work is next scheduled.
+ * @rtx_timeout.reaper:  Work performing timeout checks and subsequent actions.
+ * @ops:           Request layer operations.
+ */
+struct ssh_rtl {
+	struct ssh_ptl ptl;
+	unsigned long state;
+
+	struct {
+		spinlock_t lock;
+		struct list_head head;
+	} queue;
+
+	struct {
+		spinlock_t lock;
+		struct list_head head;
+		atomic_t count;
+	} pending;
+
+	struct {
+		struct work_struct work;
+	} tx;
+
+	struct {
+		spinlock_t lock;
+		ktime_t timeout;
+		ktime_t expires;
+		struct delayed_work reaper;
+	} rtx_timeout;
+
+	struct ssh_rtl_ops ops;
+};
+
+#define rtl_dbg(r, fmt, ...)  ptl_dbg(&(r)->ptl, fmt, ##__VA_ARGS__)
+#define rtl_info(p, fmt, ...) ptl_info(&(p)->ptl, fmt, ##__VA_ARGS__)
+#define rtl_warn(r, fmt, ...) ptl_warn(&(r)->ptl, fmt, ##__VA_ARGS__)
+#define rtl_err(r, fmt, ...)  ptl_err(&(r)->ptl, fmt, ##__VA_ARGS__)
+#define rtl_dbg_cond(r, fmt, ...) __ssam_prcond(rtl_dbg, r, fmt, ##__VA_ARGS__)
+
+#define to_ssh_rtl(ptr, member) \
+	container_of(ptr, struct ssh_rtl, member)
+
+/**
+ * ssh_rtl_get_device() - Get device associated with request transport layer.
+ * @rtl: The request transport layer.
+ *
+ * Return: Returns the device on which the given request transport layer
+ * builds upon.
+ */
+static inline struct device *ssh_rtl_get_device(struct ssh_rtl *rtl)
+{
+	return ssh_ptl_get_device(&rtl->ptl);
+}
+
+/**
+ * ssh_request_rtl() - Get request transport layer associated with request.
+ * @rqst: The request to get the request transport layer reference for.
+ *
+ * Return: Returns the &struct ssh_rtl associated with the given SSH request.
+ */
+static inline struct ssh_rtl *ssh_request_rtl(struct ssh_request *rqst)
+{
+	struct ssh_ptl *ptl;
+
+	ptl = READ_ONCE(rqst->packet.ptl);
+	return likely(ptl) ? to_ssh_rtl(ptl, ptl) : NULL;
+}
+
+int ssh_rtl_submit(struct ssh_rtl *rtl, struct ssh_request *rqst);
+bool ssh_rtl_cancel(struct ssh_request *rqst, bool pending);
+
+int ssh_rtl_init(struct ssh_rtl *rtl, struct serdev_device *serdev,
+		 const struct ssh_rtl_ops *ops);
+
+int ssh_rtl_start(struct ssh_rtl *rtl);
+int ssh_rtl_flush(struct ssh_rtl *rtl, unsigned long timeout);
+void ssh_rtl_shutdown(struct ssh_rtl *rtl);
+void ssh_rtl_destroy(struct ssh_rtl *rtl);
+
+int ssh_request_init(struct ssh_request *rqst, enum ssam_request_flags flags,
+		     const struct ssh_request_ops *ops);
+
+#endif /* _SURFACE_AGGREGATOR_SSH_REQUEST_LAYER_H */
diff --git a/drivers/platform/surface/aggregator/trace.h b/drivers/platform/surface/aggregator/trace.h
new file mode 100644
index 000000000000..eb332bb53ae4
--- /dev/null
+++ b/drivers/platform/surface/aggregator/trace.h
@@ -0,0 +1,632 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Trace points for SSAM/SSH.
+ *
+ * Copyright (C) 2020 Maximilian Luz <luzmaximilian@gmail.com>
+ */
+
+#undef TRACE_SYSTEM
+#define TRACE_SYSTEM surface_aggregator
+
+#if !defined(_SURFACE_AGGREGATOR_TRACE_H) || defined(TRACE_HEADER_MULTI_READ)
+#define _SURFACE_AGGREGATOR_TRACE_H
+
+#include <linux/surface_aggregator/serial_hub.h>
+
+#include <asm/unaligned.h>
+#include <linux/tracepoint.h>
+
+TRACE_DEFINE_ENUM(SSH_FRAME_TYPE_DATA_SEQ);
+TRACE_DEFINE_ENUM(SSH_FRAME_TYPE_DATA_NSQ);
+TRACE_DEFINE_ENUM(SSH_FRAME_TYPE_ACK);
+TRACE_DEFINE_ENUM(SSH_FRAME_TYPE_NAK);
+
+TRACE_DEFINE_ENUM(SSH_PACKET_SF_LOCKED_BIT);
+TRACE_DEFINE_ENUM(SSH_PACKET_SF_QUEUED_BIT);
+TRACE_DEFINE_ENUM(SSH_PACKET_SF_PENDING_BIT);
+TRACE_DEFINE_ENUM(SSH_PACKET_SF_TRANSMITTING_BIT);
+TRACE_DEFINE_ENUM(SSH_PACKET_SF_TRANSMITTED_BIT);
+TRACE_DEFINE_ENUM(SSH_PACKET_SF_ACKED_BIT);
+TRACE_DEFINE_ENUM(SSH_PACKET_SF_CANCELED_BIT);
+TRACE_DEFINE_ENUM(SSH_PACKET_SF_COMPLETED_BIT);
+
+TRACE_DEFINE_ENUM(SSH_PACKET_TY_FLUSH_BIT);
+TRACE_DEFINE_ENUM(SSH_PACKET_TY_SEQUENCED_BIT);
+TRACE_DEFINE_ENUM(SSH_PACKET_TY_BLOCKING_BIT);
+
+TRACE_DEFINE_ENUM(SSH_PACKET_FLAGS_SF_MASK);
+TRACE_DEFINE_ENUM(SSH_PACKET_FLAGS_TY_MASK);
+
+TRACE_DEFINE_ENUM(SSH_REQUEST_SF_LOCKED_BIT);
+TRACE_DEFINE_ENUM(SSH_REQUEST_SF_QUEUED_BIT);
+TRACE_DEFINE_ENUM(SSH_REQUEST_SF_PENDING_BIT);
+TRACE_DEFINE_ENUM(SSH_REQUEST_SF_TRANSMITTING_BIT);
+TRACE_DEFINE_ENUM(SSH_REQUEST_SF_TRANSMITTED_BIT);
+TRACE_DEFINE_ENUM(SSH_REQUEST_SF_RSPRCVD_BIT);
+TRACE_DEFINE_ENUM(SSH_REQUEST_SF_CANCELED_BIT);
+TRACE_DEFINE_ENUM(SSH_REQUEST_SF_COMPLETED_BIT);
+
+TRACE_DEFINE_ENUM(SSH_REQUEST_TY_FLUSH_BIT);
+TRACE_DEFINE_ENUM(SSH_REQUEST_TY_HAS_RESPONSE_BIT);
+
+TRACE_DEFINE_ENUM(SSH_REQUEST_FLAGS_SF_MASK);
+TRACE_DEFINE_ENUM(SSH_REQUEST_FLAGS_TY_MASK);
+
+TRACE_DEFINE_ENUM(SSAM_SSH_TC_SAM);
+TRACE_DEFINE_ENUM(SSAM_SSH_TC_BAT);
+TRACE_DEFINE_ENUM(SSAM_SSH_TC_TMP);
+TRACE_DEFINE_ENUM(SSAM_SSH_TC_PMC);
+TRACE_DEFINE_ENUM(SSAM_SSH_TC_FAN);
+TRACE_DEFINE_ENUM(SSAM_SSH_TC_PoM);
+TRACE_DEFINE_ENUM(SSAM_SSH_TC_DBG);
+TRACE_DEFINE_ENUM(SSAM_SSH_TC_KBD);
+TRACE_DEFINE_ENUM(SSAM_SSH_TC_FWU);
+TRACE_DEFINE_ENUM(SSAM_SSH_TC_UNI);
+TRACE_DEFINE_ENUM(SSAM_SSH_TC_LPC);
+TRACE_DEFINE_ENUM(SSAM_SSH_TC_TCL);
+TRACE_DEFINE_ENUM(SSAM_SSH_TC_SFL);
+TRACE_DEFINE_ENUM(SSAM_SSH_TC_KIP);
+TRACE_DEFINE_ENUM(SSAM_SSH_TC_EXT);
+TRACE_DEFINE_ENUM(SSAM_SSH_TC_BLD);
+TRACE_DEFINE_ENUM(SSAM_SSH_TC_BAS);
+TRACE_DEFINE_ENUM(SSAM_SSH_TC_SEN);
+TRACE_DEFINE_ENUM(SSAM_SSH_TC_SRQ);
+TRACE_DEFINE_ENUM(SSAM_SSH_TC_MCU);
+TRACE_DEFINE_ENUM(SSAM_SSH_TC_HID);
+TRACE_DEFINE_ENUM(SSAM_SSH_TC_TCH);
+TRACE_DEFINE_ENUM(SSAM_SSH_TC_BKL);
+TRACE_DEFINE_ENUM(SSAM_SSH_TC_TAM);
+TRACE_DEFINE_ENUM(SSAM_SSH_TC_ACC);
+TRACE_DEFINE_ENUM(SSAM_SSH_TC_UFI);
+TRACE_DEFINE_ENUM(SSAM_SSH_TC_USC);
+TRACE_DEFINE_ENUM(SSAM_SSH_TC_PEN);
+TRACE_DEFINE_ENUM(SSAM_SSH_TC_VID);
+TRACE_DEFINE_ENUM(SSAM_SSH_TC_AUD);
+TRACE_DEFINE_ENUM(SSAM_SSH_TC_SMC);
+TRACE_DEFINE_ENUM(SSAM_SSH_TC_KPD);
+TRACE_DEFINE_ENUM(SSAM_SSH_TC_REG);
+
+#define SSAM_PTR_UID_LEN		9
+#define SSAM_U8_FIELD_NOT_APPLICABLE	((u16)-1)
+#define SSAM_SEQ_NOT_APPLICABLE		((u16)-1)
+#define SSAM_RQID_NOT_APPLICABLE	((u32)-1)
+#define SSAM_SSH_TC_NOT_APPLICABLE	0
+
+#ifndef _SURFACE_AGGREGATOR_TRACE_HELPERS
+#define _SURFACE_AGGREGATOR_TRACE_HELPERS
+
+/**
+ * ssam_trace_ptr_uid() - Convert the pointer to a non-pointer UID string.
+ * @ptr: The pointer to convert.
+ * @uid_str: A buffer of length SSAM_PTR_UID_LEN where the UID will be stored.
+ *
+ * Converts the given pointer into a UID string that is safe to be shared
+ * with userspace and logs, i.e. doesn't give away the real memory location.
+ */
+static inline void ssam_trace_ptr_uid(const void *ptr, char *uid_str)
+{
+	char buf[2 * sizeof(void *) + 1];
+
+	BUILD_BUG_ON(ARRAY_SIZE(buf) < SSAM_PTR_UID_LEN);
+
+	snprintf(buf, ARRAY_SIZE(buf), "%p", ptr);
+	memcpy(uid_str, &buf[ARRAY_SIZE(buf) - SSAM_PTR_UID_LEN],
+	       SSAM_PTR_UID_LEN);
+}
+
+/**
+ * ssam_trace_get_packet_seq() - Read the packet's sequence ID.
+ * @p: The packet.
+ *
+ * Return: Returns the packet's sequence ID (SEQ) field if present, or
+ * %SSAM_SEQ_NOT_APPLICABLE if not (e.g. flush packet).
+ */
+static inline u16 ssam_trace_get_packet_seq(const struct ssh_packet *p)
+{
+	if (!p->data.ptr || p->data.len < SSH_MESSAGE_LENGTH(0))
+		return SSAM_SEQ_NOT_APPLICABLE;
+
+	return p->data.ptr[SSH_MSGOFFSET_FRAME(seq)];
+}
+
+/**
+ * ssam_trace_get_request_id() - Read the packet's request ID.
+ * @p: The packet.
+ *
+ * Return: Returns the packet's request ID (RQID) field if the packet
+ * represents a request with command data, or %SSAM_RQID_NOT_APPLICABLE if not
+ * (e.g. flush request, control packet).
+ */
+static inline u32 ssam_trace_get_request_id(const struct ssh_packet *p)
+{
+	if (!p->data.ptr || p->data.len < SSH_COMMAND_MESSAGE_LENGTH(0))
+		return SSAM_RQID_NOT_APPLICABLE;
+
+	return get_unaligned_le16(&p->data.ptr[SSH_MSGOFFSET_COMMAND(rqid)]);
+}
+
+/**
+ * ssam_trace_get_request_tc() - Read the packet's request target category.
+ * @p: The packet.
+ *
+ * Return: Returns the packet's request target category (TC) field if the
+ * packet represents a request with command data, or %SSAM_TC_NOT_APPLICABLE
+ * if not (e.g. flush request, control packet).
+ */
+static inline u32 ssam_trace_get_request_tc(const struct ssh_packet *p)
+{
+	if (!p->data.ptr || p->data.len < SSH_COMMAND_MESSAGE_LENGTH(0))
+		return SSAM_SSH_TC_NOT_APPLICABLE;
+
+	return get_unaligned_le16(&p->data.ptr[SSH_MSGOFFSET_COMMAND(tc)]);
+}
+
+#endif /* _SURFACE_AGGREGATOR_TRACE_HELPERS */
+
+#define ssam_trace_get_command_field_u8(packet, field) \
+	((!(packet) || (packet)->data.len < SSH_COMMAND_MESSAGE_LENGTH(0)) \
+	 ? 0 : (packet)->data.ptr[SSH_MSGOFFSET_COMMAND(field)])
+
+#define ssam_show_generic_u8_field(value)				\
+	__print_symbolic(value,						\
+		{ SSAM_U8_FIELD_NOT_APPLICABLE,		"N/A" }		\
+	)
+
+#define ssam_show_frame_type(ty)					\
+	__print_symbolic(ty,						\
+		{ SSH_FRAME_TYPE_DATA_SEQ,		"DSEQ" },	\
+		{ SSH_FRAME_TYPE_DATA_NSQ,		"DNSQ" },	\
+		{ SSH_FRAME_TYPE_ACK,			"ACK"  },	\
+		{ SSH_FRAME_TYPE_NAK,			"NAK"  }	\
+	)
+
+#define ssam_show_packet_type(type)					\
+	__print_flags(flags & SSH_PACKET_FLAGS_TY_MASK, "",		\
+		{ BIT(SSH_PACKET_TY_FLUSH_BIT),		"F" },		\
+		{ BIT(SSH_PACKET_TY_SEQUENCED_BIT),	"S" },		\
+		{ BIT(SSH_PACKET_TY_BLOCKING_BIT),	"B" }		\
+	)
+
+#define ssam_show_packet_state(state)					\
+	__print_flags(flags & SSH_PACKET_FLAGS_SF_MASK, "",		\
+		{ BIT(SSH_PACKET_SF_LOCKED_BIT),	"L" },		\
+		{ BIT(SSH_PACKET_SF_QUEUED_BIT),	"Q" },		\
+		{ BIT(SSH_PACKET_SF_PENDING_BIT),	"P" },		\
+		{ BIT(SSH_PACKET_SF_TRANSMITTING_BIT),	"S" },		\
+		{ BIT(SSH_PACKET_SF_TRANSMITTED_BIT),	"T" },		\
+		{ BIT(SSH_PACKET_SF_ACKED_BIT),		"A" },		\
+		{ BIT(SSH_PACKET_SF_CANCELED_BIT),	"C" },		\
+		{ BIT(SSH_PACKET_SF_COMPLETED_BIT),	"F" }		\
+	)
+
+#define ssam_show_packet_seq(seq)					\
+	__print_symbolic(seq,						\
+		{ SSAM_SEQ_NOT_APPLICABLE,		"N/A" }		\
+	)
+
+#define ssam_show_request_type(flags)					\
+	__print_flags((flags) & SSH_REQUEST_FLAGS_TY_MASK, "",		\
+		{ BIT(SSH_REQUEST_TY_FLUSH_BIT),	"F" },		\
+		{ BIT(SSH_REQUEST_TY_HAS_RESPONSE_BIT),	"R" }		\
+	)
+
+#define ssam_show_request_state(flags)					\
+	__print_flags((flags) & SSH_REQUEST_FLAGS_SF_MASK, "",		\
+		{ BIT(SSH_REQUEST_SF_LOCKED_BIT),	"L" },		\
+		{ BIT(SSH_REQUEST_SF_QUEUED_BIT),	"Q" },		\
+		{ BIT(SSH_REQUEST_SF_PENDING_BIT),	"P" },		\
+		{ BIT(SSH_REQUEST_SF_TRANSMITTING_BIT),	"S" },		\
+		{ BIT(SSH_REQUEST_SF_TRANSMITTED_BIT),	"T" },		\
+		{ BIT(SSH_REQUEST_SF_RSPRCVD_BIT),	"A" },		\
+		{ BIT(SSH_REQUEST_SF_CANCELED_BIT),	"C" },		\
+		{ BIT(SSH_REQUEST_SF_COMPLETED_BIT),	"F" }		\
+	)
+
+#define ssam_show_request_id(rqid)					\
+	__print_symbolic(rqid,						\
+		{ SSAM_RQID_NOT_APPLICABLE,		"N/A" }		\
+	)
+
+#define ssam_show_ssh_tc(rqid)						\
+	__print_symbolic(rqid,						\
+		{ SSAM_SSH_TC_NOT_APPLICABLE,		"N/A" },	\
+		{ SSAM_SSH_TC_SAM,			"SAM" },	\
+		{ SSAM_SSH_TC_BAT,			"BAT" },	\
+		{ SSAM_SSH_TC_TMP,			"TMP" },	\
+		{ SSAM_SSH_TC_PMC,			"PMC" },	\
+		{ SSAM_SSH_TC_FAN,			"FAN" },	\
+		{ SSAM_SSH_TC_PoM,			"PoM" },	\
+		{ SSAM_SSH_TC_DBG,			"DBG" },	\
+		{ SSAM_SSH_TC_KBD,			"KBD" },	\
+		{ SSAM_SSH_TC_FWU,			"FWU" },	\
+		{ SSAM_SSH_TC_UNI,			"UNI" },	\
+		{ SSAM_SSH_TC_LPC,			"LPC" },	\
+		{ SSAM_SSH_TC_TCL,			"TCL" },	\
+		{ SSAM_SSH_TC_SFL,			"SFL" },	\
+		{ SSAM_SSH_TC_KIP,			"KIP" },	\
+		{ SSAM_SSH_TC_EXT,			"EXT" },	\
+		{ SSAM_SSH_TC_BLD,			"BLD" },	\
+		{ SSAM_SSH_TC_BAS,			"BAS" },	\
+		{ SSAM_SSH_TC_SEN,			"SEN" },	\
+		{ SSAM_SSH_TC_SRQ,			"SRQ" },	\
+		{ SSAM_SSH_TC_MCU,			"MCU" },	\
+		{ SSAM_SSH_TC_HID,			"HID" },	\
+		{ SSAM_SSH_TC_TCH,			"TCH" },	\
+		{ SSAM_SSH_TC_BKL,			"BKL" },	\
+		{ SSAM_SSH_TC_TAM,			"TAM" },	\
+		{ SSAM_SSH_TC_ACC,			"ACC" },	\
+		{ SSAM_SSH_TC_UFI,			"UFI" },	\
+		{ SSAM_SSH_TC_USC,			"USC" },	\
+		{ SSAM_SSH_TC_PEN,			"PEN" },	\
+		{ SSAM_SSH_TC_VID,			"VID" },	\
+		{ SSAM_SSH_TC_AUD,			"AUD" },	\
+		{ SSAM_SSH_TC_SMC,			"SMC" },	\
+		{ SSAM_SSH_TC_KPD,			"KPD" },	\
+		{ SSAM_SSH_TC_REG,			"REG" }		\
+	)
+
+DECLARE_EVENT_CLASS(ssam_frame_class,
+	TP_PROTO(const struct ssh_frame *frame),
+
+	TP_ARGS(frame),
+
+	TP_STRUCT__entry(
+		__field(u8, type)
+		__field(u8, seq)
+		__field(u16, len)
+	),
+
+	TP_fast_assign(
+		__entry->type = frame->type;
+		__entry->seq = frame->seq;
+		__entry->len = get_unaligned_le16(&frame->len);
+	),
+
+	TP_printk("ty=%s, seq=%#04x, len=%u",
+		ssam_show_frame_type(__entry->type),
+		__entry->seq,
+		__entry->len
+	)
+);
+
+#define DEFINE_SSAM_FRAME_EVENT(name)				\
+	DEFINE_EVENT(ssam_frame_class, ssam_##name,		\
+		TP_PROTO(const struct ssh_frame *frame),	\
+		TP_ARGS(frame)					\
+	)
+
+DECLARE_EVENT_CLASS(ssam_command_class,
+	TP_PROTO(const struct ssh_command *cmd, u16 len),
+
+	TP_ARGS(cmd, len),
+
+	TP_STRUCT__entry(
+		__field(u16, rqid)
+		__field(u16, len)
+		__field(u8, tc)
+		__field(u8, cid)
+		__field(u8, iid)
+	),
+
+	TP_fast_assign(
+		__entry->rqid = get_unaligned_le16(&cmd->rqid);
+		__entry->tc = cmd->tc;
+		__entry->cid = cmd->cid;
+		__entry->iid = cmd->iid;
+		__entry->len = len;
+	),
+
+	TP_printk("rqid=%#06x, tc=%s, cid=%#04x, iid=%#04x, len=%u",
+		__entry->rqid,
+		ssam_show_ssh_tc(__entry->tc),
+		__entry->cid,
+		__entry->iid,
+		__entry->len
+	)
+);
+
+#define DEFINE_SSAM_COMMAND_EVENT(name)					\
+	DEFINE_EVENT(ssam_command_class, ssam_##name,			\
+		TP_PROTO(const struct ssh_command *cmd, u16 len),	\
+		TP_ARGS(cmd, len)					\
+	)
+
+DECLARE_EVENT_CLASS(ssam_packet_class,
+	TP_PROTO(const struct ssh_packet *packet),
+
+	TP_ARGS(packet),
+
+	TP_STRUCT__entry(
+		__field(unsigned long, state)
+		__array(char, uid, SSAM_PTR_UID_LEN)
+		__field(u8, priority)
+		__field(u16, length)
+		__field(u16, seq)
+	),
+
+	TP_fast_assign(
+		__entry->state = READ_ONCE(packet->state);
+		ssam_trace_ptr_uid(packet, __entry->uid);
+		__entry->priority = READ_ONCE(packet->priority);
+		__entry->length = packet->data.len;
+		__entry->seq = ssam_trace_get_packet_seq(packet);
+	),
+
+	TP_printk("uid=%s, seq=%s, ty=%s, pri=%#04x, len=%u, sta=%s",
+		__entry->uid,
+		ssam_show_packet_seq(__entry->seq),
+		ssam_show_packet_type(__entry->state),
+		__entry->priority,
+		__entry->length,
+		ssam_show_packet_state(__entry->state)
+	)
+);
+
+#define DEFINE_SSAM_PACKET_EVENT(name)				\
+	DEFINE_EVENT(ssam_packet_class, ssam_##name,		\
+		TP_PROTO(const struct ssh_packet *packet),	\
+		TP_ARGS(packet)					\
+	)
+
+DECLARE_EVENT_CLASS(ssam_packet_status_class,
+	TP_PROTO(const struct ssh_packet *packet, int status),
+
+	TP_ARGS(packet, status),
+
+	TP_STRUCT__entry(
+		__field(unsigned long, state)
+		__field(int, status)
+		__array(char, uid, SSAM_PTR_UID_LEN)
+		__field(u8, priority)
+		__field(u16, length)
+		__field(u16, seq)
+	),
+
+	TP_fast_assign(
+		__entry->state = READ_ONCE(packet->state);
+		__entry->status = status;
+		ssam_trace_ptr_uid(packet, __entry->uid);
+		__entry->priority = READ_ONCE(packet->priority);
+		__entry->length = packet->data.len;
+		__entry->seq = ssam_trace_get_packet_seq(packet);
+	),
+
+	TP_printk("uid=%s, seq=%s, ty=%s, pri=%#04x, len=%u, sta=%s, status=%d",
+		__entry->uid,
+		ssam_show_packet_seq(__entry->seq),
+		ssam_show_packet_type(__entry->state),
+		__entry->priority,
+		__entry->length,
+		ssam_show_packet_state(__entry->state),
+		__entry->status
+	)
+);
+
+#define DEFINE_SSAM_PACKET_STATUS_EVENT(name)				\
+	DEFINE_EVENT(ssam_packet_status_class, ssam_##name,		\
+		TP_PROTO(const struct ssh_packet *packet, int status),	\
+		TP_ARGS(packet, status)					\
+	)
+
+DECLARE_EVENT_CLASS(ssam_request_class,
+	TP_PROTO(const struct ssh_request *request),
+
+	TP_ARGS(request),
+
+	TP_STRUCT__entry(
+		__field(unsigned long, state)
+		__field(u32, rqid)
+		__array(char, uid, SSAM_PTR_UID_LEN)
+		__field(u8, tc)
+		__field(u16, cid)
+		__field(u16, iid)
+	),
+
+	TP_fast_assign(
+		const struct ssh_packet *p = &request->packet;
+
+		/* Use packet for UID so we can match requests to packets. */
+		__entry->state = READ_ONCE(request->state);
+		__entry->rqid = ssam_trace_get_request_id(p);
+		ssam_trace_ptr_uid(p, __entry->uid);
+		__entry->tc = ssam_trace_get_request_tc(p);
+		__entry->cid = ssam_trace_get_command_field_u8(p, cid);
+		__entry->iid = ssam_trace_get_command_field_u8(p, iid);
+	),
+
+	TP_printk("uid=%s, rqid=%s, ty=%s, sta=%s, tc=%s, cid=%s, iid=%s",
+		__entry->uid,
+		ssam_show_request_id(__entry->rqid),
+		ssam_show_request_type(__entry->state),
+		ssam_show_request_state(__entry->state),
+		ssam_show_ssh_tc(__entry->tc),
+		ssam_show_generic_u8_field(__entry->cid),
+		ssam_show_generic_u8_field(__entry->iid)
+	)
+);
+
+#define DEFINE_SSAM_REQUEST_EVENT(name)				\
+	DEFINE_EVENT(ssam_request_class, ssam_##name,		\
+		TP_PROTO(const struct ssh_request *request),	\
+		TP_ARGS(request)				\
+	)
+
+DECLARE_EVENT_CLASS(ssam_request_status_class,
+	TP_PROTO(const struct ssh_request *request, int status),
+
+	TP_ARGS(request, status),
+
+	TP_STRUCT__entry(
+		__field(unsigned long, state)
+		__field(u32, rqid)
+		__field(int, status)
+		__array(char, uid, SSAM_PTR_UID_LEN)
+		__field(u8, tc)
+		__field(u16, cid)
+		__field(u16, iid)
+	),
+
+	TP_fast_assign(
+		const struct ssh_packet *p = &request->packet;
+
+		/* Use packet for UID so we can match requests to packets. */
+		__entry->state = READ_ONCE(request->state);
+		__entry->rqid = ssam_trace_get_request_id(p);
+		__entry->status = status;
+		ssam_trace_ptr_uid(p, __entry->uid);
+		__entry->tc = ssam_trace_get_request_tc(p);
+		__entry->cid = ssam_trace_get_command_field_u8(p, cid);
+		__entry->iid = ssam_trace_get_command_field_u8(p, iid);
+	),
+
+	TP_printk("uid=%s, rqid=%s, ty=%s, sta=%s, tc=%s, cid=%s, iid=%s, status=%d",
+		__entry->uid,
+		ssam_show_request_id(__entry->rqid),
+		ssam_show_request_type(__entry->state),
+		ssam_show_request_state(__entry->state),
+		ssam_show_ssh_tc(__entry->tc),
+		ssam_show_generic_u8_field(__entry->cid),
+		ssam_show_generic_u8_field(__entry->iid),
+		__entry->status
+	)
+);
+
+#define DEFINE_SSAM_REQUEST_STATUS_EVENT(name)				\
+	DEFINE_EVENT(ssam_request_status_class, ssam_##name,		\
+		TP_PROTO(const struct ssh_request *request, int status),\
+		TP_ARGS(request, status)				\
+	)
+
+DECLARE_EVENT_CLASS(ssam_alloc_class,
+	TP_PROTO(void *ptr, size_t len),
+
+	TP_ARGS(ptr, len),
+
+	TP_STRUCT__entry(
+		__field(size_t, len)
+		__array(char, uid, SSAM_PTR_UID_LEN)
+	),
+
+	TP_fast_assign(
+		__entry->len = len;
+		ssam_trace_ptr_uid(ptr, __entry->uid);
+	),
+
+	TP_printk("uid=%s, len=%zu", __entry->uid, __entry->len)
+);
+
+#define DEFINE_SSAM_ALLOC_EVENT(name)					\
+	DEFINE_EVENT(ssam_alloc_class, ssam_##name,			\
+		TP_PROTO(void *ptr, size_t len),			\
+		TP_ARGS(ptr, len)					\
+	)
+
+DECLARE_EVENT_CLASS(ssam_free_class,
+	TP_PROTO(void *ptr),
+
+	TP_ARGS(ptr),
+
+	TP_STRUCT__entry(
+		__array(char, uid, SSAM_PTR_UID_LEN)
+	),
+
+	TP_fast_assign(
+		ssam_trace_ptr_uid(ptr, __entry->uid);
+	),
+
+	TP_printk("uid=%s", __entry->uid)
+);
+
+#define DEFINE_SSAM_FREE_EVENT(name)					\
+	DEFINE_EVENT(ssam_free_class, ssam_##name,			\
+		TP_PROTO(void *ptr),					\
+		TP_ARGS(ptr)						\
+	)
+
+DECLARE_EVENT_CLASS(ssam_pending_class,
+	TP_PROTO(unsigned int pending),
+
+	TP_ARGS(pending),
+
+	TP_STRUCT__entry(
+		__field(unsigned int, pending)
+	),
+
+	TP_fast_assign(
+		__entry->pending = pending;
+	),
+
+	TP_printk("pending=%u", __entry->pending)
+);
+
+#define DEFINE_SSAM_PENDING_EVENT(name)					\
+	DEFINE_EVENT(ssam_pending_class, ssam_##name,			\
+		TP_PROTO(unsigned int pending),				\
+		TP_ARGS(pending)					\
+	)
+
+DECLARE_EVENT_CLASS(ssam_data_class,
+	TP_PROTO(size_t length),
+
+	TP_ARGS(length),
+
+	TP_STRUCT__entry(
+		__field(size_t, length)
+	),
+
+	TP_fast_assign(
+		__entry->length = length;
+	),
+
+	TP_printk("length=%zu", __entry->length)
+);
+
+#define DEFINE_SSAM_DATA_EVENT(name)					\
+	DEFINE_EVENT(ssam_data_class, ssam_##name,			\
+		TP_PROTO(size_t length),				\
+		TP_ARGS(length)						\
+	)
+
+DEFINE_SSAM_FRAME_EVENT(rx_frame_received);
+DEFINE_SSAM_COMMAND_EVENT(rx_response_received);
+DEFINE_SSAM_COMMAND_EVENT(rx_event_received);
+
+DEFINE_SSAM_PACKET_EVENT(packet_release);
+DEFINE_SSAM_PACKET_EVENT(packet_submit);
+DEFINE_SSAM_PACKET_EVENT(packet_resubmit);
+DEFINE_SSAM_PACKET_EVENT(packet_timeout);
+DEFINE_SSAM_PACKET_EVENT(packet_cancel);
+DEFINE_SSAM_PACKET_STATUS_EVENT(packet_complete);
+DEFINE_SSAM_PENDING_EVENT(ptl_timeout_reap);
+
+DEFINE_SSAM_REQUEST_EVENT(request_submit);
+DEFINE_SSAM_REQUEST_EVENT(request_timeout);
+DEFINE_SSAM_REQUEST_EVENT(request_cancel);
+DEFINE_SSAM_REQUEST_STATUS_EVENT(request_complete);
+DEFINE_SSAM_PENDING_EVENT(rtl_timeout_reap);
+
+DEFINE_SSAM_PACKET_EVENT(ei_tx_drop_ack_packet);
+DEFINE_SSAM_PACKET_EVENT(ei_tx_drop_nak_packet);
+DEFINE_SSAM_PACKET_EVENT(ei_tx_drop_dsq_packet);
+DEFINE_SSAM_PACKET_STATUS_EVENT(ei_tx_fail_write);
+DEFINE_SSAM_PACKET_EVENT(ei_tx_corrupt_data);
+DEFINE_SSAM_DATA_EVENT(ei_rx_corrupt_syn);
+DEFINE_SSAM_FRAME_EVENT(ei_rx_corrupt_data);
+DEFINE_SSAM_REQUEST_EVENT(ei_rx_drop_response);
+
+DEFINE_SSAM_ALLOC_EVENT(ctrl_packet_alloc);
+DEFINE_SSAM_FREE_EVENT(ctrl_packet_free);
+
+DEFINE_SSAM_ALLOC_EVENT(event_item_alloc);
+DEFINE_SSAM_FREE_EVENT(event_item_free);
+
+#endif /* _SURFACE_AGGREGATOR_TRACE_H */
+
+/* This part must be outside protection */
+#undef TRACE_INCLUDE_PATH
+#undef TRACE_INCLUDE_FILE
+
+#define TRACE_INCLUDE_PATH .
+#define TRACE_INCLUDE_FILE trace
+
+#include <trace/define_trace.h>
diff --git a/drivers/platform/surface/surface3-wmi.c b/drivers/platform/surface/surface3-wmi.c
index 130b6f52a600..fcd1d4fb94d5 100644
--- a/drivers/platform/surface/surface3-wmi.c
+++ b/drivers/platform/surface/surface3-wmi.c
@@ -57,12 +57,16 @@ static DEFINE_MUTEX(s3_wmi_lock);
 static int s3_wmi_query_block(const char *guid, int instance, int *ret)
 {
 	struct acpi_buffer output = { ACPI_ALLOCATE_BUFFER, NULL };
+	union acpi_object *obj = NULL;
 	acpi_status status;
-	union acpi_object *obj;
 	int error = 0;
 
 	mutex_lock(&s3_wmi_lock);
 	status = wmi_query_block(guid, instance, &output);
+	if (ACPI_FAILURE(status)) {
+		error = -EIO;
+		goto out_free_unlock;
+	}
 
 	obj = output.pointer;
 
diff --git a/drivers/platform/surface/surface_acpi_notify.c b/drivers/platform/surface/surface_acpi_notify.c
new file mode 100644
index 000000000000..ef9c1f8e8336
--- /dev/null
+++ b/drivers/platform/surface/surface_acpi_notify.c
@@ -0,0 +1,886 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Driver for the Surface ACPI Notify (SAN) interface/shim.
+ *
+ * Translates communication from ACPI to Surface System Aggregator Module
+ * (SSAM/SAM) requests and back, specifically SAM-over-SSH. Translates SSAM
+ * events back to ACPI notifications. Allows handling of discrete GPU
+ * notifications sent from ACPI via the SAN interface by providing them to any
+ * registered external driver.
+ *
+ * Copyright (C) 2019-2020 Maximilian Luz <luzmaximilian@gmail.com>
+ */
+
+#include <asm/unaligned.h>
+#include <linux/acpi.h>
+#include <linux/delay.h>
+#include <linux/jiffies.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/notifier.h>
+#include <linux/platform_device.h>
+#include <linux/rwsem.h>
+
+#include <linux/surface_aggregator/controller.h>
+#include <linux/surface_acpi_notify.h>
+
+struct san_data {
+	struct device *dev;
+	struct ssam_controller *ctrl;
+
+	struct acpi_connection_info info;
+
+	struct ssam_event_notifier nf_bat;
+	struct ssam_event_notifier nf_tmp;
+};
+
+#define to_san_data(ptr, member) \
+	container_of(ptr, struct san_data, member)
+
+
+/* -- dGPU notifier interface. ---------------------------------------------- */
+
+struct san_rqsg_if {
+	struct rw_semaphore lock;
+	struct device *dev;
+	struct blocking_notifier_head nh;
+};
+
+static struct san_rqsg_if san_rqsg_if = {
+	.lock = __RWSEM_INITIALIZER(san_rqsg_if.lock),
+	.dev = NULL,
+	.nh = BLOCKING_NOTIFIER_INIT(san_rqsg_if.nh),
+};
+
+static int san_set_rqsg_interface_device(struct device *dev)
+{
+	int status = 0;
+
+	down_write(&san_rqsg_if.lock);
+	if (!san_rqsg_if.dev && dev)
+		san_rqsg_if.dev = dev;
+	else
+		status = -EBUSY;
+	up_write(&san_rqsg_if.lock);
+
+	return status;
+}
+
+/**
+ * san_client_link() - Link client as consumer to SAN device.
+ * @client: The client to link.
+ *
+ * Sets up a device link between the provided client device as consumer and
+ * the SAN device as provider. This function can be used to ensure that the
+ * SAN interface has been set up and will be set up for as long as the driver
+ * of the client device is bound. This guarantees that, during that time, all
+ * dGPU events will be received by any registered notifier.
+ *
+ * The link will be automatically removed once the client device's driver is
+ * unbound.
+ *
+ * Return: Returns zero on success, %-ENXIO if the SAN interface has not been
+ * set up yet, and %-ENOMEM if device link creation failed.
+ */
+int san_client_link(struct device *client)
+{
+	const u32 flags = DL_FLAG_PM_RUNTIME | DL_FLAG_AUTOREMOVE_CONSUMER;
+	struct device_link *link;
+
+	down_read(&san_rqsg_if.lock);
+
+	if (!san_rqsg_if.dev) {
+		up_read(&san_rqsg_if.lock);
+		return -ENXIO;
+	}
+
+	link = device_link_add(client, san_rqsg_if.dev, flags);
+	if (!link) {
+		up_read(&san_rqsg_if.lock);
+		return -ENOMEM;
+	}
+
+	if (READ_ONCE(link->status) == DL_STATE_SUPPLIER_UNBIND) {
+		up_read(&san_rqsg_if.lock);
+		return -ENXIO;
+	}
+
+	up_read(&san_rqsg_if.lock);
+	return 0;
+}
+EXPORT_SYMBOL_GPL(san_client_link);
+
+/**
+ * san_dgpu_notifier_register() - Register a SAN dGPU notifier.
+ * @nb: The notifier-block to register.
+ *
+ * Registers a SAN dGPU notifier, receiving any new SAN dGPU events sent from
+ * ACPI. The registered notifier will be called with &struct san_dgpu_event
+ * as notifier data and the command ID of that event as notifier action.
+ */
+int san_dgpu_notifier_register(struct notifier_block *nb)
+{
+	return blocking_notifier_chain_register(&san_rqsg_if.nh, nb);
+}
+EXPORT_SYMBOL_GPL(san_dgpu_notifier_register);
+
+/**
+ * san_dgpu_notifier_unregister() - Unregister a SAN dGPU notifier.
+ * @nb: The notifier-block to unregister.
+ */
+int san_dgpu_notifier_unregister(struct notifier_block *nb)
+{
+	return blocking_notifier_chain_unregister(&san_rqsg_if.nh, nb);
+}
+EXPORT_SYMBOL_GPL(san_dgpu_notifier_unregister);
+
+static int san_dgpu_notifier_call(struct san_dgpu_event *evt)
+{
+	int ret;
+
+	ret = blocking_notifier_call_chain(&san_rqsg_if.nh, evt->command, evt);
+	return notifier_to_errno(ret);
+}
+
+
+/* -- ACPI _DSM event relay. ------------------------------------------------ */
+
+#define SAN_DSM_REVISION	0
+
+/* 93b666c5-70c6-469f-a215-3d487c91ab3c */
+static const guid_t SAN_DSM_UUID =
+	GUID_INIT(0x93b666c5, 0x70c6, 0x469f, 0xa2, 0x15, 0x3d,
+		  0x48, 0x7c, 0x91, 0xab, 0x3c);
+
+enum san_dsm_event_fn {
+	SAN_DSM_EVENT_FN_BAT1_STAT = 0x03,
+	SAN_DSM_EVENT_FN_BAT1_INFO = 0x04,
+	SAN_DSM_EVENT_FN_ADP1_STAT = 0x05,
+	SAN_DSM_EVENT_FN_ADP1_INFO = 0x06,
+	SAN_DSM_EVENT_FN_BAT2_STAT = 0x07,
+	SAN_DSM_EVENT_FN_BAT2_INFO = 0x08,
+	SAN_DSM_EVENT_FN_THERMAL   = 0x09,
+	SAN_DSM_EVENT_FN_DPTF      = 0x0a,
+};
+
+enum sam_event_cid_bat {
+	SAM_EVENT_CID_BAT_BIX  = 0x15,
+	SAM_EVENT_CID_BAT_BST  = 0x16,
+	SAM_EVENT_CID_BAT_ADP  = 0x17,
+	SAM_EVENT_CID_BAT_PROT = 0x18,
+	SAM_EVENT_CID_BAT_DPTF = 0x4f,
+};
+
+enum sam_event_cid_tmp {
+	SAM_EVENT_CID_TMP_TRIP = 0x0b,
+};
+
+struct san_event_work {
+	struct delayed_work work;
+	struct device *dev;
+	struct ssam_event event;	/* must be last */
+};
+
+static int san_acpi_notify_event(struct device *dev, u64 func,
+				 union acpi_object *param)
+{
+	acpi_handle san = ACPI_HANDLE(dev);
+	union acpi_object *obj;
+	int status = 0;
+
+	if (!acpi_check_dsm(san, &SAN_DSM_UUID, SAN_DSM_REVISION, BIT_ULL(func)))
+		return 0;
+
+	dev_dbg(dev, "notify event %#04llx\n", func);
+
+	obj = acpi_evaluate_dsm_typed(san, &SAN_DSM_UUID, SAN_DSM_REVISION,
+				      func, param, ACPI_TYPE_BUFFER);
+	if (!obj)
+		return -EFAULT;
+
+	if (obj->buffer.length != 1 || obj->buffer.pointer[0] != 0) {
+		dev_err(dev, "got unexpected result from _DSM\n");
+		status = -EPROTO;
+	}
+
+	ACPI_FREE(obj);
+	return status;
+}
+
+static int san_evt_bat_adp(struct device *dev, const struct ssam_event *event)
+{
+	int status;
+
+	status = san_acpi_notify_event(dev, SAN_DSM_EVENT_FN_ADP1_STAT, NULL);
+	if (status)
+		return status;
+
+	/*
+	 * Ensure that the battery states get updated correctly. When the
+	 * battery is fully charged and an adapter is plugged in, it sometimes
+	 * is not updated correctly, instead showing it as charging.
+	 * Explicitly trigger battery updates to fix this.
+	 */
+
+	status = san_acpi_notify_event(dev, SAN_DSM_EVENT_FN_BAT1_STAT, NULL);
+	if (status)
+		return status;
+
+	return san_acpi_notify_event(dev, SAN_DSM_EVENT_FN_BAT2_STAT, NULL);
+}
+
+static int san_evt_bat_bix(struct device *dev, const struct ssam_event *event)
+{
+	enum san_dsm_event_fn fn;
+
+	if (event->instance_id == 0x02)
+		fn = SAN_DSM_EVENT_FN_BAT2_INFO;
+	else
+		fn = SAN_DSM_EVENT_FN_BAT1_INFO;
+
+	return san_acpi_notify_event(dev, fn, NULL);
+}
+
+static int san_evt_bat_bst(struct device *dev, const struct ssam_event *event)
+{
+	enum san_dsm_event_fn fn;
+
+	if (event->instance_id == 0x02)
+		fn = SAN_DSM_EVENT_FN_BAT2_STAT;
+	else
+		fn = SAN_DSM_EVENT_FN_BAT1_STAT;
+
+	return san_acpi_notify_event(dev, fn, NULL);
+}
+
+static int san_evt_bat_dptf(struct device *dev, const struct ssam_event *event)
+{
+	union acpi_object payload;
+
+	/*
+	 * The Surface ACPI expects a buffer and not a package. It specifically
+	 * checks for ObjectType (Arg3) == 0x03. This will cause a warning in
+	 * acpica/nsarguments.c, but that warning can be safely ignored.
+	 */
+	payload.type = ACPI_TYPE_BUFFER;
+	payload.buffer.length = event->length;
+	payload.buffer.pointer = (u8 *)&event->data[0];
+
+	return san_acpi_notify_event(dev, SAN_DSM_EVENT_FN_DPTF, &payload);
+}
+
+static unsigned long san_evt_bat_delay(u8 cid)
+{
+	switch (cid) {
+	case SAM_EVENT_CID_BAT_ADP:
+		/*
+		 * Wait for battery state to update before signaling adapter
+		 * change.
+		 */
+		return msecs_to_jiffies(5000);
+
+	case SAM_EVENT_CID_BAT_BST:
+		/* Ensure we do not miss anything important due to caching. */
+		return msecs_to_jiffies(2000);
+
+	default:
+		return 0;
+	}
+}
+
+static bool san_evt_bat(const struct ssam_event *event, struct device *dev)
+{
+	int status;
+
+	switch (event->command_id) {
+	case SAM_EVENT_CID_BAT_BIX:
+		status = san_evt_bat_bix(dev, event);
+		break;
+
+	case SAM_EVENT_CID_BAT_BST:
+		status = san_evt_bat_bst(dev, event);
+		break;
+
+	case SAM_EVENT_CID_BAT_ADP:
+		status = san_evt_bat_adp(dev, event);
+		break;
+
+	case SAM_EVENT_CID_BAT_PROT:
+		/*
+		 * TODO: Implement support for battery protection status change
+		 *       event.
+		 */
+		return true;
+
+	case SAM_EVENT_CID_BAT_DPTF:
+		status = san_evt_bat_dptf(dev, event);
+		break;
+
+	default:
+		return false;
+	}
+
+	if (status) {
+		dev_err(dev, "error handling power event (cid = %#04x)\n",
+			event->command_id);
+	}
+
+	return true;
+}
+
+static void san_evt_bat_workfn(struct work_struct *work)
+{
+	struct san_event_work *ev;
+
+	ev = container_of(work, struct san_event_work, work.work);
+	san_evt_bat(&ev->event, ev->dev);
+	kfree(ev);
+}
+
+static u32 san_evt_bat_nf(struct ssam_event_notifier *nf,
+			  const struct ssam_event *event)
+{
+	struct san_data *d = to_san_data(nf, nf_bat);
+	struct san_event_work *work;
+	unsigned long delay = san_evt_bat_delay(event->command_id);
+
+	if (delay == 0)
+		return san_evt_bat(event, d->dev) ? SSAM_NOTIF_HANDLED : 0;
+
+	work = kzalloc(sizeof(*work) + event->length, GFP_KERNEL);
+	if (!work)
+		return ssam_notifier_from_errno(-ENOMEM);
+
+	INIT_DELAYED_WORK(&work->work, san_evt_bat_workfn);
+	work->dev = d->dev;
+
+	memcpy(&work->event, event, sizeof(struct ssam_event) + event->length);
+
+	schedule_delayed_work(&work->work, delay);
+	return SSAM_NOTIF_HANDLED;
+}
+
+static int san_evt_tmp_trip(struct device *dev, const struct ssam_event *event)
+{
+	union acpi_object param;
+
+	/*
+	 * The Surface ACPI expects an integer and not a package. This will
+	 * cause a warning in acpica/nsarguments.c, but that warning can be
+	 * safely ignored.
+	 */
+	param.type = ACPI_TYPE_INTEGER;
+	param.integer.value = event->instance_id;
+
+	return san_acpi_notify_event(dev, SAN_DSM_EVENT_FN_THERMAL, &param);
+}
+
+static bool san_evt_tmp(const struct ssam_event *event, struct device *dev)
+{
+	int status;
+
+	switch (event->command_id) {
+	case SAM_EVENT_CID_TMP_TRIP:
+		status = san_evt_tmp_trip(dev, event);
+		break;
+
+	default:
+		return false;
+	}
+
+	if (status) {
+		dev_err(dev, "error handling thermal event (cid = %#04x)\n",
+			event->command_id);
+	}
+
+	return true;
+}
+
+static u32 san_evt_tmp_nf(struct ssam_event_notifier *nf,
+			  const struct ssam_event *event)
+{
+	struct san_data *d = to_san_data(nf, nf_tmp);
+
+	return san_evt_tmp(event, d->dev) ? SSAM_NOTIF_HANDLED : 0;
+}
+
+
+/* -- ACPI GSB OperationRegion handler -------------------------------------- */
+
+struct gsb_data_in {
+	u8 cv;
+} __packed;
+
+struct gsb_data_rqsx {
+	u8 cv;				/* Command value (san_gsb_request_cv). */
+	u8 tc;				/* Target category. */
+	u8 tid;				/* Target ID. */
+	u8 iid;				/* Instance ID. */
+	u8 snc;				/* Expect-response-flag. */
+	u8 cid;				/* Command ID. */
+	u16 cdl;			/* Payload length. */
+	u8 pld[];			/* Payload. */
+} __packed;
+
+struct gsb_data_etwl {
+	u8 cv;				/* Command value (should be 0x02). */
+	u8 etw3;			/* Unknown. */
+	u8 etw4;			/* Unknown. */
+	u8 msg[];			/* Error message (ASCIIZ). */
+} __packed;
+
+struct gsb_data_out {
+	u8 status;			/* _SSH communication status. */
+	u8 len;				/* _SSH payload length. */
+	u8 pld[];			/* _SSH payload. */
+} __packed;
+
+union gsb_buffer_data {
+	struct gsb_data_in   in;	/* Common input. */
+	struct gsb_data_rqsx rqsx;	/* RQSX input. */
+	struct gsb_data_etwl etwl;	/* ETWL input. */
+	struct gsb_data_out  out;	/* Output. */
+};
+
+struct gsb_buffer {
+	u8 status;			/* GSB AttribRawProcess status. */
+	u8 len;				/* GSB AttribRawProcess length. */
+	union gsb_buffer_data data;
+} __packed;
+
+#define SAN_GSB_MAX_RQSX_PAYLOAD  (U8_MAX - 2 - sizeof(struct gsb_data_rqsx))
+#define SAN_GSB_MAX_RESPONSE	  (U8_MAX - 2 - sizeof(struct gsb_data_out))
+
+#define SAN_GSB_COMMAND		0
+
+enum san_gsb_request_cv {
+	SAN_GSB_REQUEST_CV_RQST = 0x01,
+	SAN_GSB_REQUEST_CV_ETWL = 0x02,
+	SAN_GSB_REQUEST_CV_RQSG = 0x03,
+};
+
+#define SAN_REQUEST_NUM_TRIES	5
+
+static acpi_status san_etwl(struct san_data *d, struct gsb_buffer *b)
+{
+	struct gsb_data_etwl *etwl = &b->data.etwl;
+
+	if (b->len < sizeof(struct gsb_data_etwl)) {
+		dev_err(d->dev, "invalid ETWL package (len = %d)\n", b->len);
+		return AE_OK;
+	}
+
+	dev_err(d->dev, "ETWL(%#04x, %#04x): %.*s\n", etwl->etw3, etwl->etw4,
+		(unsigned int)(b->len - sizeof(struct gsb_data_etwl)),
+		(char *)etwl->msg);
+
+	/* Indicate success. */
+	b->status = 0x00;
+	b->len = 0x00;
+
+	return AE_OK;
+}
+
+static
+struct gsb_data_rqsx *san_validate_rqsx(struct device *dev, const char *type,
+					struct gsb_buffer *b)
+{
+	struct gsb_data_rqsx *rqsx = &b->data.rqsx;
+
+	if (b->len < sizeof(struct gsb_data_rqsx)) {
+		dev_err(dev, "invalid %s package (len = %d)\n", type, b->len);
+		return NULL;
+	}
+
+	if (get_unaligned(&rqsx->cdl) != b->len - sizeof(struct gsb_data_rqsx)) {
+		dev_err(dev, "bogus %s package (len = %d, cdl = %d)\n",
+			type, b->len, get_unaligned(&rqsx->cdl));
+		return NULL;
+	}
+
+	if (get_unaligned(&rqsx->cdl) > SAN_GSB_MAX_RQSX_PAYLOAD) {
+		dev_err(dev, "payload for %s package too large (cdl = %d)\n",
+			type, get_unaligned(&rqsx->cdl));
+		return NULL;
+	}
+
+	return rqsx;
+}
+
+static void gsb_rqsx_response_error(struct gsb_buffer *gsb, int status)
+{
+	gsb->status = 0x00;
+	gsb->len = 0x02;
+	gsb->data.out.status = (u8)(-status);
+	gsb->data.out.len = 0x00;
+}
+
+static void gsb_rqsx_response_success(struct gsb_buffer *gsb, u8 *ptr, size_t len)
+{
+	gsb->status = 0x00;
+	gsb->len = len + 2;
+	gsb->data.out.status = 0x00;
+	gsb->data.out.len = len;
+
+	if (len)
+		memcpy(&gsb->data.out.pld[0], ptr, len);
+}
+
+static acpi_status san_rqst_fixup_suspended(struct san_data *d,
+					    struct ssam_request *rqst,
+					    struct gsb_buffer *gsb)
+{
+	if (rqst->target_category == SSAM_SSH_TC_BAS && rqst->command_id == 0x0D) {
+		u8 base_state = 1;
+
+		/* Base state quirk:
+		 * The base state may be queried from ACPI when the EC is still
+		 * suspended. In this case it will return '-EPERM'. This query
+		 * will only be triggered from the ACPI lid GPE interrupt, thus
+		 * we are either in laptop or studio mode (base status 0x01 or
+		 * 0x02). Furthermore, we will only get here if the device (and
+		 * EC) have been suspended.
+		 *
+		 * We now assume that the device is in laptop mode (0x01). This
+		 * has the drawback that it will wake the device when unfolding
+		 * it in studio mode, but it also allows us to avoid actively
+		 * waiting for the EC to wake up, which may incur a notable
+		 * delay.
+		 */
+
+		dev_dbg(d->dev, "rqst: fixup: base-state quirk\n");
+
+		gsb_rqsx_response_success(gsb, &base_state, sizeof(base_state));
+		return AE_OK;
+	}
+
+	gsb_rqsx_response_error(gsb, -ENXIO);
+	return AE_OK;
+}
+
+static acpi_status san_rqst(struct san_data *d, struct gsb_buffer *buffer)
+{
+	u8 rspbuf[SAN_GSB_MAX_RESPONSE];
+	struct gsb_data_rqsx *gsb_rqst;
+	struct ssam_request rqst;
+	struct ssam_response rsp;
+	int status = 0;
+
+	gsb_rqst = san_validate_rqsx(d->dev, "RQST", buffer);
+	if (!gsb_rqst)
+		return AE_OK;
+
+	rqst.target_category = gsb_rqst->tc;
+	rqst.target_id = gsb_rqst->tid;
+	rqst.command_id = gsb_rqst->cid;
+	rqst.instance_id = gsb_rqst->iid;
+	rqst.flags = gsb_rqst->snc ? SSAM_REQUEST_HAS_RESPONSE : 0;
+	rqst.length = get_unaligned(&gsb_rqst->cdl);
+	rqst.payload = &gsb_rqst->pld[0];
+
+	rsp.capacity = ARRAY_SIZE(rspbuf);
+	rsp.length = 0;
+	rsp.pointer = &rspbuf[0];
+
+	/* Handle suspended device. */
+	if (d->dev->power.is_suspended) {
+		dev_warn(d->dev, "rqst: device is suspended, not executing\n");
+		return san_rqst_fixup_suspended(d, &rqst, buffer);
+	}
+
+	status = __ssam_retry(ssam_request_sync_onstack, SAN_REQUEST_NUM_TRIES,
+			      d->ctrl, &rqst, &rsp, SAN_GSB_MAX_RQSX_PAYLOAD);
+
+	if (!status) {
+		gsb_rqsx_response_success(buffer, rsp.pointer, rsp.length);
+	} else {
+		dev_err(d->dev, "rqst: failed with error %d\n", status);
+		gsb_rqsx_response_error(buffer, status);
+	}
+
+	return AE_OK;
+}
+
+static acpi_status san_rqsg(struct san_data *d, struct gsb_buffer *buffer)
+{
+	struct gsb_data_rqsx *gsb_rqsg;
+	struct san_dgpu_event evt;
+	int status;
+
+	gsb_rqsg = san_validate_rqsx(d->dev, "RQSG", buffer);
+	if (!gsb_rqsg)
+		return AE_OK;
+
+	evt.category = gsb_rqsg->tc;
+	evt.target = gsb_rqsg->tid;
+	evt.command = gsb_rqsg->cid;
+	evt.instance = gsb_rqsg->iid;
+	evt.length = get_unaligned(&gsb_rqsg->cdl);
+	evt.payload = &gsb_rqsg->pld[0];
+
+	status = san_dgpu_notifier_call(&evt);
+	if (!status) {
+		gsb_rqsx_response_success(buffer, NULL, 0);
+	} else {
+		dev_err(d->dev, "rqsg: failed with error %d\n", status);
+		gsb_rqsx_response_error(buffer, status);
+	}
+
+	return AE_OK;
+}
+
+static acpi_status san_opreg_handler(u32 function, acpi_physical_address command,
+				     u32 bits, u64 *value64, void *opreg_context,
+				     void *region_context)
+{
+	struct san_data *d = to_san_data(opreg_context, info);
+	struct gsb_buffer *buffer = (struct gsb_buffer *)value64;
+	int accessor_type = (function & 0xFFFF0000) >> 16;
+
+	if (command != SAN_GSB_COMMAND) {
+		dev_warn(d->dev, "unsupported command: %#04llx\n", command);
+		return AE_OK;
+	}
+
+	if (accessor_type != ACPI_GSB_ACCESS_ATTRIB_RAW_PROCESS) {
+		dev_err(d->dev, "invalid access type: %#04x\n", accessor_type);
+		return AE_OK;
+	}
+
+	/* Buffer must have at least contain the command-value. */
+	if (buffer->len == 0) {
+		dev_err(d->dev, "request-package too small\n");
+		return AE_OK;
+	}
+
+	switch (buffer->data.in.cv) {
+	case SAN_GSB_REQUEST_CV_RQST:
+		return san_rqst(d, buffer);
+
+	case SAN_GSB_REQUEST_CV_ETWL:
+		return san_etwl(d, buffer);
+
+	case SAN_GSB_REQUEST_CV_RQSG:
+		return san_rqsg(d, buffer);
+
+	default:
+		dev_warn(d->dev, "unsupported SAN0 request (cv: %#04x)\n",
+			 buffer->data.in.cv);
+		return AE_OK;
+	}
+}
+
+
+/* -- Driver setup. --------------------------------------------------------- */
+
+static int san_events_register(struct platform_device *pdev)
+{
+	struct san_data *d = platform_get_drvdata(pdev);
+	int status;
+
+	d->nf_bat.base.priority = 1;
+	d->nf_bat.base.fn = san_evt_bat_nf;
+	d->nf_bat.event.reg = SSAM_EVENT_REGISTRY_SAM;
+	d->nf_bat.event.id.target_category = SSAM_SSH_TC_BAT;
+	d->nf_bat.event.id.instance = 0;
+	d->nf_bat.event.mask = SSAM_EVENT_MASK_TARGET;
+	d->nf_bat.event.flags = SSAM_EVENT_SEQUENCED;
+
+	d->nf_tmp.base.priority = 1;
+	d->nf_tmp.base.fn = san_evt_tmp_nf;
+	d->nf_tmp.event.reg = SSAM_EVENT_REGISTRY_SAM;
+	d->nf_tmp.event.id.target_category = SSAM_SSH_TC_TMP;
+	d->nf_tmp.event.id.instance = 0;
+	d->nf_tmp.event.mask = SSAM_EVENT_MASK_TARGET;
+	d->nf_tmp.event.flags = SSAM_EVENT_SEQUENCED;
+
+	status = ssam_notifier_register(d->ctrl, &d->nf_bat);
+	if (status)
+		return status;
+
+	status = ssam_notifier_register(d->ctrl, &d->nf_tmp);
+	if (status)
+		ssam_notifier_unregister(d->ctrl, &d->nf_bat);
+
+	return status;
+}
+
+static void san_events_unregister(struct platform_device *pdev)
+{
+	struct san_data *d = platform_get_drvdata(pdev);
+
+	ssam_notifier_unregister(d->ctrl, &d->nf_bat);
+	ssam_notifier_unregister(d->ctrl, &d->nf_tmp);
+}
+
+#define san_consumer_printk(level, dev, handle, fmt, ...)			\
+do {										\
+	char *path = "<error getting consumer path>";				\
+	struct acpi_buffer buffer = {						\
+		.length = ACPI_ALLOCATE_BUFFER,					\
+		.pointer = NULL,						\
+	};									\
+										\
+	if (ACPI_SUCCESS(acpi_get_name(handle, ACPI_FULL_PATHNAME, &buffer)))	\
+		path = buffer.pointer;						\
+										\
+	dev_##level(dev, "[%s]: " fmt, path, ##__VA_ARGS__);			\
+	kfree(buffer.pointer);							\
+} while (0)
+
+#define san_consumer_dbg(dev, handle, fmt, ...) \
+	san_consumer_printk(dbg, dev, handle, fmt, ##__VA_ARGS__)
+
+#define san_consumer_warn(dev, handle, fmt, ...) \
+	san_consumer_printk(warn, dev, handle, fmt, ##__VA_ARGS__)
+
+static bool is_san_consumer(struct platform_device *pdev, acpi_handle handle)
+{
+	struct acpi_handle_list dep_devices;
+	acpi_handle supplier = ACPI_HANDLE(&pdev->dev);
+	acpi_status status;
+	int i;
+
+	if (!acpi_has_method(handle, "_DEP"))
+		return false;
+
+	status = acpi_evaluate_reference(handle, "_DEP", NULL, &dep_devices);
+	if (ACPI_FAILURE(status)) {
+		san_consumer_dbg(&pdev->dev, handle, "failed to evaluate _DEP\n");
+		return false;
+	}
+
+	for (i = 0; i < dep_devices.count; i++) {
+		if (dep_devices.handles[i] == supplier)
+			return true;
+	}
+
+	return false;
+}
+
+static acpi_status san_consumer_setup(acpi_handle handle, u32 lvl,
+				      void *context, void **rv)
+{
+	const u32 flags = DL_FLAG_PM_RUNTIME | DL_FLAG_AUTOREMOVE_SUPPLIER;
+	struct platform_device *pdev = context;
+	struct acpi_device *adev;
+	struct device_link *link;
+
+	if (!is_san_consumer(pdev, handle))
+		return AE_OK;
+
+	/* Ignore ACPI devices that are not present. */
+	if (acpi_bus_get_device(handle, &adev) != 0)
+		return AE_OK;
+
+	san_consumer_dbg(&pdev->dev, handle, "creating device link\n");
+
+	/* Try to set up device links, ignore but log errors. */
+	link = device_link_add(&adev->dev, &pdev->dev, flags);
+	if (!link) {
+		san_consumer_warn(&pdev->dev, handle, "failed to create device link\n");
+		return AE_OK;
+	}
+
+	return AE_OK;
+}
+
+static int san_consumer_links_setup(struct platform_device *pdev)
+{
+	acpi_status status;
+
+	status = acpi_walk_namespace(ACPI_TYPE_DEVICE, ACPI_ROOT_OBJECT,
+				     ACPI_UINT32_MAX, san_consumer_setup, NULL,
+				     pdev, NULL);
+
+	return status ? -EFAULT : 0;
+}
+
+static int san_probe(struct platform_device *pdev)
+{
+	acpi_handle san = ACPI_HANDLE(&pdev->dev);
+	struct ssam_controller *ctrl;
+	struct san_data *data;
+	acpi_status astatus;
+	int status;
+
+	ctrl = ssam_client_bind(&pdev->dev);
+	if (IS_ERR(ctrl))
+		return PTR_ERR(ctrl) == -ENODEV ? -EPROBE_DEFER : PTR_ERR(ctrl);
+
+	status = san_consumer_links_setup(pdev);
+	if (status)
+		return status;
+
+	data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	data->dev = &pdev->dev;
+	data->ctrl = ctrl;
+
+	platform_set_drvdata(pdev, data);
+
+	astatus = acpi_install_address_space_handler(san, ACPI_ADR_SPACE_GSBUS,
+						     &san_opreg_handler, NULL,
+						     &data->info);
+	if (ACPI_FAILURE(astatus))
+		return -ENXIO;
+
+	status = san_events_register(pdev);
+	if (status)
+		goto err_enable_events;
+
+	status = san_set_rqsg_interface_device(&pdev->dev);
+	if (status)
+		goto err_install_dev;
+
+	acpi_walk_dep_device_list(san);
+	return 0;
+
+err_install_dev:
+	san_events_unregister(pdev);
+err_enable_events:
+	acpi_remove_address_space_handler(san, ACPI_ADR_SPACE_GSBUS,
+					  &san_opreg_handler);
+	return status;
+}
+
+static int san_remove(struct platform_device *pdev)
+{
+	acpi_handle san = ACPI_HANDLE(&pdev->dev);
+
+	san_set_rqsg_interface_device(NULL);
+	acpi_remove_address_space_handler(san, ACPI_ADR_SPACE_GSBUS,
+					  &san_opreg_handler);
+	san_events_unregister(pdev);
+
+	/*
+	 * We have unregistered our event sources. Now we need to ensure that
+	 * all delayed works they may have spawned are run to completion.
+	 */
+	flush_scheduled_work();
+
+	return 0;
+}
+
+static const struct acpi_device_id san_match[] = {
+	{ "MSHW0091" },
+	{ },
+};
+MODULE_DEVICE_TABLE(acpi, san_match);
+
+static struct platform_driver surface_acpi_notify = {
+	.probe = san_probe,
+	.remove = san_remove,
+	.driver = {
+		.name = "surface_acpi_notify",
+		.acpi_match_table = san_match,
+		.probe_type = PROBE_PREFER_ASYNCHRONOUS,
+	},
+};
+module_platform_driver(surface_acpi_notify);
+
+MODULE_AUTHOR("Maximilian Luz <luzmaximilian@gmail.com>");
+MODULE_DESCRIPTION("Surface ACPI Notify driver for Surface System Aggregator Module");
+MODULE_LICENSE("GPL");
diff --git a/drivers/platform/surface/surface_aggregator_cdev.c b/drivers/platform/surface/surface_aggregator_cdev.c
new file mode 100644
index 000000000000..79e28fab7e40
--- /dev/null
+++ b/drivers/platform/surface/surface_aggregator_cdev.c
@@ -0,0 +1,322 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Provides user-space access to the SSAM EC via the /dev/surface/aggregator
+ * misc device. Intended for debugging and development.
+ *
+ * Copyright (C) 2020 Maximilian Luz <luzmaximilian@gmail.com>
+ */
+
+#include <linux/fs.h>
+#include <linux/kernel.h>
+#include <linux/kref.h>
+#include <linux/miscdevice.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/rwsem.h>
+#include <linux/slab.h>
+#include <linux/uaccess.h>
+
+#include <linux/surface_aggregator/cdev.h>
+#include <linux/surface_aggregator/controller.h>
+
+#define SSAM_CDEV_DEVICE_NAME	"surface_aggregator_cdev"
+
+struct ssam_cdev {
+	struct kref kref;
+	struct rw_semaphore lock;
+	struct ssam_controller *ctrl;
+	struct miscdevice mdev;
+};
+
+static void __ssam_cdev_release(struct kref *kref)
+{
+	kfree(container_of(kref, struct ssam_cdev, kref));
+}
+
+static struct ssam_cdev *ssam_cdev_get(struct ssam_cdev *cdev)
+{
+	if (cdev)
+		kref_get(&cdev->kref);
+
+	return cdev;
+}
+
+static void ssam_cdev_put(struct ssam_cdev *cdev)
+{
+	if (cdev)
+		kref_put(&cdev->kref, __ssam_cdev_release);
+}
+
+static int ssam_cdev_device_open(struct inode *inode, struct file *filp)
+{
+	struct miscdevice *mdev = filp->private_data;
+	struct ssam_cdev *cdev = container_of(mdev, struct ssam_cdev, mdev);
+
+	filp->private_data = ssam_cdev_get(cdev);
+	return stream_open(inode, filp);
+}
+
+static int ssam_cdev_device_release(struct inode *inode, struct file *filp)
+{
+	ssam_cdev_put(filp->private_data);
+	return 0;
+}
+
+static long ssam_cdev_request(struct ssam_cdev *cdev, unsigned long arg)
+{
+	struct ssam_cdev_request __user *r;
+	struct ssam_cdev_request rqst;
+	struct ssam_request spec = {};
+	struct ssam_response rsp = {};
+	const void __user *plddata;
+	void __user *rspdata;
+	int status = 0, ret = 0, tmp;
+
+	r = (struct ssam_cdev_request __user *)arg;
+	ret = copy_struct_from_user(&rqst, sizeof(rqst), r, sizeof(*r));
+	if (ret)
+		goto out;
+
+	plddata = u64_to_user_ptr(rqst.payload.data);
+	rspdata = u64_to_user_ptr(rqst.response.data);
+
+	/* Setup basic request fields. */
+	spec.target_category = rqst.target_category;
+	spec.target_id = rqst.target_id;
+	spec.command_id = rqst.command_id;
+	spec.instance_id = rqst.instance_id;
+	spec.flags = 0;
+	spec.length = rqst.payload.length;
+	spec.payload = NULL;
+
+	if (rqst.flags & SSAM_CDEV_REQUEST_HAS_RESPONSE)
+		spec.flags |= SSAM_REQUEST_HAS_RESPONSE;
+
+	if (rqst.flags & SSAM_CDEV_REQUEST_UNSEQUENCED)
+		spec.flags |= SSAM_REQUEST_UNSEQUENCED;
+
+	rsp.capacity = rqst.response.length;
+	rsp.length = 0;
+	rsp.pointer = NULL;
+
+	/* Get request payload from user-space. */
+	if (spec.length) {
+		if (!plddata) {
+			ret = -EINVAL;
+			goto out;
+		}
+
+		/*
+		 * Note: spec.length is limited to U16_MAX bytes via struct
+		 * ssam_cdev_request. This is slightly larger than the
+		 * theoretical maximum (SSH_COMMAND_MAX_PAYLOAD_SIZE) of the
+		 * underlying protocol (note that nothing remotely this size
+		 * should ever be allocated in any normal case). This size is
+		 * validated later in ssam_request_sync(), for allocation the
+		 * bound imposed by u16 should be enough.
+		 */
+		spec.payload = kzalloc(spec.length, GFP_KERNEL);
+		if (!spec.payload) {
+			ret = -ENOMEM;
+			goto out;
+		}
+
+		if (copy_from_user((void *)spec.payload, plddata, spec.length)) {
+			ret = -EFAULT;
+			goto out;
+		}
+	}
+
+	/* Allocate response buffer. */
+	if (rsp.capacity) {
+		if (!rspdata) {
+			ret = -EINVAL;
+			goto out;
+		}
+
+		/*
+		 * Note: rsp.capacity is limited to U16_MAX bytes via struct
+		 * ssam_cdev_request. This is slightly larger than the
+		 * theoretical maximum (SSH_COMMAND_MAX_PAYLOAD_SIZE) of the
+		 * underlying protocol (note that nothing remotely this size
+		 * should ever be allocated in any normal case). In later use,
+		 * this capacity does not have to be strictly bounded, as it
+		 * is only used as an output buffer to be written to. For
+		 * allocation the bound imposed by u16 should be enough.
+		 */
+		rsp.pointer = kzalloc(rsp.capacity, GFP_KERNEL);
+		if (!rsp.pointer) {
+			ret = -ENOMEM;
+			goto out;
+		}
+	}
+
+	/* Perform request. */
+	status = ssam_request_sync(cdev->ctrl, &spec, &rsp);
+	if (status)
+		goto out;
+
+	/* Copy response to user-space. */
+	if (rsp.length && copy_to_user(rspdata, rsp.pointer, rsp.length))
+		ret = -EFAULT;
+
+out:
+	/* Always try to set response-length and status. */
+	tmp = put_user(rsp.length, &r->response.length);
+	if (tmp)
+		ret = tmp;
+
+	tmp = put_user(status, &r->status);
+	if (tmp)
+		ret = tmp;
+
+	/* Cleanup. */
+	kfree(spec.payload);
+	kfree(rsp.pointer);
+
+	return ret;
+}
+
+static long __ssam_cdev_device_ioctl(struct ssam_cdev *cdev, unsigned int cmd,
+				     unsigned long arg)
+{
+	switch (cmd) {
+	case SSAM_CDEV_REQUEST:
+		return ssam_cdev_request(cdev, arg);
+
+	default:
+		return -ENOTTY;
+	}
+}
+
+static long ssam_cdev_device_ioctl(struct file *file, unsigned int cmd,
+				   unsigned long arg)
+{
+	struct ssam_cdev *cdev = file->private_data;
+	long status;
+
+	/* Ensure that controller is valid for as long as we need it. */
+	if (down_read_killable(&cdev->lock))
+		return -ERESTARTSYS;
+
+	if (!cdev->ctrl) {
+		up_read(&cdev->lock);
+		return -ENODEV;
+	}
+
+	status = __ssam_cdev_device_ioctl(cdev, cmd, arg);
+
+	up_read(&cdev->lock);
+	return status;
+}
+
+static const struct file_operations ssam_controller_fops = {
+	.owner          = THIS_MODULE,
+	.open           = ssam_cdev_device_open,
+	.release        = ssam_cdev_device_release,
+	.unlocked_ioctl = ssam_cdev_device_ioctl,
+	.compat_ioctl   = ssam_cdev_device_ioctl,
+	.llseek         = noop_llseek,
+};
+
+static int ssam_dbg_device_probe(struct platform_device *pdev)
+{
+	struct ssam_controller *ctrl;
+	struct ssam_cdev *cdev;
+	int status;
+
+	ctrl = ssam_client_bind(&pdev->dev);
+	if (IS_ERR(ctrl))
+		return PTR_ERR(ctrl) == -ENODEV ? -EPROBE_DEFER : PTR_ERR(ctrl);
+
+	cdev = kzalloc(sizeof(*cdev), GFP_KERNEL);
+	if (!cdev)
+		return -ENOMEM;
+
+	kref_init(&cdev->kref);
+	init_rwsem(&cdev->lock);
+	cdev->ctrl = ctrl;
+
+	cdev->mdev.parent   = &pdev->dev;
+	cdev->mdev.minor    = MISC_DYNAMIC_MINOR;
+	cdev->mdev.name     = "surface_aggregator";
+	cdev->mdev.nodename = "surface/aggregator";
+	cdev->mdev.fops     = &ssam_controller_fops;
+
+	status = misc_register(&cdev->mdev);
+	if (status) {
+		kfree(cdev);
+		return status;
+	}
+
+	platform_set_drvdata(pdev, cdev);
+	return 0;
+}
+
+static int ssam_dbg_device_remove(struct platform_device *pdev)
+{
+	struct ssam_cdev *cdev = platform_get_drvdata(pdev);
+
+	misc_deregister(&cdev->mdev);
+
+	/*
+	 * The controller is only guaranteed to be valid for as long as the
+	 * driver is bound. Remove controller so that any lingering open files
+	 * cannot access it any more after we're gone.
+	 */
+	down_write(&cdev->lock);
+	cdev->ctrl = NULL;
+	up_write(&cdev->lock);
+
+	ssam_cdev_put(cdev);
+	return 0;
+}
+
+static struct platform_device *ssam_cdev_device;
+
+static struct platform_driver ssam_cdev_driver = {
+	.probe = ssam_dbg_device_probe,
+	.remove = ssam_dbg_device_remove,
+	.driver = {
+		.name = SSAM_CDEV_DEVICE_NAME,
+		.probe_type = PROBE_PREFER_ASYNCHRONOUS,
+	},
+};
+
+static int __init ssam_debug_init(void)
+{
+	int status;
+
+	ssam_cdev_device = platform_device_alloc(SSAM_CDEV_DEVICE_NAME,
+						 PLATFORM_DEVID_NONE);
+	if (!ssam_cdev_device)
+		return -ENOMEM;
+
+	status = platform_device_add(ssam_cdev_device);
+	if (status)
+		goto err_device;
+
+	status = platform_driver_register(&ssam_cdev_driver);
+	if (status)
+		goto err_driver;
+
+	return 0;
+
+err_driver:
+	platform_device_del(ssam_cdev_device);
+err_device:
+	platform_device_put(ssam_cdev_device);
+	return status;
+}
+module_init(ssam_debug_init);
+
+static void __exit ssam_debug_exit(void)
+{
+	platform_driver_unregister(&ssam_cdev_driver);
+	platform_device_unregister(ssam_cdev_device);
+}
+module_exit(ssam_debug_exit);
+
+MODULE_AUTHOR("Maximilian Luz <luzmaximilian@gmail.com>");
+MODULE_DESCRIPTION("User-space interface for Surface System Aggregator Module");
+MODULE_LICENSE("GPL");
diff --git a/drivers/platform/surface/surface_hotplug.c b/drivers/platform/surface/surface_hotplug.c
new file mode 100644
index 000000000000..cfcc15cfbacb
--- /dev/null
+++ b/drivers/platform/surface/surface_hotplug.c
@@ -0,0 +1,282 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Surface Book (2 and later) hot-plug driver.
+ *
+ * Surface Book devices (can) have a hot-pluggable discrete GPU (dGPU). This
+ * driver is responsible for out-of-band hot-plug event signaling on these
+ * devices. It is specifically required when the hot-plug device is in D3cold
+ * and can thus not generate PCIe hot-plug events itself.
+ *
+ * Event signaling is handled via ACPI, which will generate the appropriate
+ * device-check notifications to be picked up by the PCIe hot-plug driver.
+ *
+ * Copyright (C) 2019-2021 Maximilian Luz <luzmaximilian@gmail.com>
+ */
+
+#include <linux/acpi.h>
+#include <linux/gpio.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/platform_device.h>
+
+static const struct acpi_gpio_params shps_base_presence_int   = { 0, 0, false };
+static const struct acpi_gpio_params shps_base_presence       = { 1, 0, false };
+static const struct acpi_gpio_params shps_device_power_int    = { 2, 0, false };
+static const struct acpi_gpio_params shps_device_power        = { 3, 0, false };
+static const struct acpi_gpio_params shps_device_presence_int = { 4, 0, false };
+static const struct acpi_gpio_params shps_device_presence     = { 5, 0, false };
+
+static const struct acpi_gpio_mapping shps_acpi_gpios[] = {
+	{ "base_presence-int-gpio",   &shps_base_presence_int,   1 },
+	{ "base_presence-gpio",       &shps_base_presence,       1 },
+	{ "device_power-int-gpio",    &shps_device_power_int,    1 },
+	{ "device_power-gpio",        &shps_device_power,        1 },
+	{ "device_presence-int-gpio", &shps_device_presence_int, 1 },
+	{ "device_presence-gpio",     &shps_device_presence,     1 },
+	{ },
+};
+
+/* 5515a847-ed55-4b27-8352-cd320e10360a */
+static const guid_t shps_dsm_guid =
+	GUID_INIT(0x5515a847, 0xed55, 0x4b27, 0x83, 0x52, 0xcd, 0x32, 0x0e, 0x10, 0x36, 0x0a);
+
+#define SHPS_DSM_REVISION		1
+
+enum shps_dsm_fn {
+	SHPS_DSM_FN_PCI_NUM_ENTRIES	= 0x01,
+	SHPS_DSM_FN_PCI_GET_ENTRIES	= 0x02,
+	SHPS_DSM_FN_IRQ_BASE_PRESENCE	= 0x03,
+	SHPS_DSM_FN_IRQ_DEVICE_POWER	= 0x04,
+	SHPS_DSM_FN_IRQ_DEVICE_PRESENCE	= 0x05,
+};
+
+enum shps_irq_type {
+	/* NOTE: Must be in order of enum shps_dsm_fn above. */
+	SHPS_IRQ_TYPE_BASE_PRESENCE	= 0,
+	SHPS_IRQ_TYPE_DEVICE_POWER	= 1,
+	SHPS_IRQ_TYPE_DEVICE_PRESENCE	= 2,
+	SHPS_NUM_IRQS,
+};
+
+static const char *const shps_gpio_names[] = {
+	[SHPS_IRQ_TYPE_BASE_PRESENCE]	= "base_presence",
+	[SHPS_IRQ_TYPE_DEVICE_POWER]	= "device_power",
+	[SHPS_IRQ_TYPE_DEVICE_PRESENCE]	= "device_presence",
+};
+
+struct shps_device {
+	struct mutex lock[SHPS_NUM_IRQS];  /* Protects update in shps_dsm_notify_irq() */
+	struct gpio_desc *gpio[SHPS_NUM_IRQS];
+	unsigned int irq[SHPS_NUM_IRQS];
+};
+
+#define SHPS_IRQ_NOT_PRESENT		((unsigned int)-1)
+
+static enum shps_dsm_fn shps_dsm_fn_for_irq(enum shps_irq_type type)
+{
+	return SHPS_DSM_FN_IRQ_BASE_PRESENCE + type;
+}
+
+static void shps_dsm_notify_irq(struct platform_device *pdev, enum shps_irq_type type)
+{
+	struct shps_device *sdev = platform_get_drvdata(pdev);
+	acpi_handle handle = ACPI_HANDLE(&pdev->dev);
+	union acpi_object *result;
+	union acpi_object param;
+	int value;
+
+	mutex_lock(&sdev->lock[type]);
+
+	value = gpiod_get_value_cansleep(sdev->gpio[type]);
+	if (value < 0) {
+		mutex_unlock(&sdev->lock[type]);
+		dev_err(&pdev->dev, "failed to get gpio: %d (irq=%d)\n", type, value);
+		return;
+	}
+
+	dev_dbg(&pdev->dev, "IRQ notification via DSM (irq=%d, value=%d)\n", type, value);
+
+	param.type = ACPI_TYPE_INTEGER;
+	param.integer.value = value;
+
+	result = acpi_evaluate_dsm(handle, &shps_dsm_guid, SHPS_DSM_REVISION,
+				   shps_dsm_fn_for_irq(type), &param);
+
+	if (!result) {
+		dev_err(&pdev->dev, "IRQ notification via DSM failed (irq=%d, gpio=%d)\n",
+			type, value);
+
+	} else if (result->type != ACPI_TYPE_BUFFER) {
+		dev_err(&pdev->dev,
+			"IRQ notification via DSM failed: unexpected result type (irq=%d, gpio=%d)\n",
+			type, value);
+
+	} else if (result->buffer.length != 1 || result->buffer.pointer[0] != 0) {
+		dev_err(&pdev->dev,
+			"IRQ notification via DSM failed: unexpected result value (irq=%d, gpio=%d)\n",
+			type, value);
+	}
+
+	mutex_unlock(&sdev->lock[type]);
+
+	if (result)
+		ACPI_FREE(result);
+}
+
+static irqreturn_t shps_handle_irq(int irq, void *data)
+{
+	struct platform_device *pdev = data;
+	struct shps_device *sdev = platform_get_drvdata(pdev);
+	int type;
+
+	/* Figure out which IRQ we're handling. */
+	for (type = 0; type < SHPS_NUM_IRQS; type++)
+		if (irq == sdev->irq[type])
+			break;
+
+	/* We should have found our interrupt, if not: this is a bug. */
+	if (WARN(type >= SHPS_NUM_IRQS, "invalid IRQ number: %d\n", irq))
+		return IRQ_HANDLED;
+
+	/* Forward interrupt to ACPI via DSM. */
+	shps_dsm_notify_irq(pdev, type);
+	return IRQ_HANDLED;
+}
+
+static int shps_setup_irq(struct platform_device *pdev, enum shps_irq_type type)
+{
+	unsigned long flags = IRQF_ONESHOT | IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING;
+	struct shps_device *sdev = platform_get_drvdata(pdev);
+	struct gpio_desc *gpiod;
+	acpi_handle handle = ACPI_HANDLE(&pdev->dev);
+	const char *irq_name;
+	const int dsm = shps_dsm_fn_for_irq(type);
+	int status, irq;
+
+	/*
+	 * Only set up interrupts that we actually need: The Surface Book 3
+	 * does not have a DSM for base presence, so don't set up an interrupt
+	 * for that.
+	 */
+	if (!acpi_check_dsm(handle, &shps_dsm_guid, SHPS_DSM_REVISION, BIT(dsm))) {
+		dev_dbg(&pdev->dev, "IRQ notification via DSM not present (irq=%d)\n", type);
+		return 0;
+	}
+
+	gpiod = devm_gpiod_get(&pdev->dev, shps_gpio_names[type], GPIOD_ASIS);
+	if (IS_ERR(gpiod))
+		return PTR_ERR(gpiod);
+
+	irq = gpiod_to_irq(gpiod);
+	if (irq < 0)
+		return irq;
+
+	irq_name = devm_kasprintf(&pdev->dev, GFP_KERNEL, "shps-irq-%d", type);
+	if (!irq_name)
+		return -ENOMEM;
+
+	status = devm_request_threaded_irq(&pdev->dev, irq, NULL, shps_handle_irq,
+					   flags, irq_name, pdev);
+	if (status)
+		return status;
+
+	dev_dbg(&pdev->dev, "set up irq %d as type %d\n", irq, type);
+
+	sdev->gpio[type] = gpiod;
+	sdev->irq[type] = irq;
+
+	return 0;
+}
+
+static int surface_hotplug_remove(struct platform_device *pdev)
+{
+	struct shps_device *sdev = platform_get_drvdata(pdev);
+	int i;
+
+	/* Ensure that IRQs have been fully handled and won't trigger any more. */
+	for (i = 0; i < SHPS_NUM_IRQS; i++) {
+		if (sdev->irq[i] != SHPS_IRQ_NOT_PRESENT)
+			disable_irq(sdev->irq[i]);
+
+		mutex_destroy(&sdev->lock[i]);
+	}
+
+	return 0;
+}
+
+static int surface_hotplug_probe(struct platform_device *pdev)
+{
+	struct shps_device *sdev;
+	int status, i;
+
+	/*
+	 * The MSHW0153 device is also present on the Surface Laptop 3,
+	 * however that doesn't have a hot-pluggable PCIe device. It also
+	 * doesn't have any GPIO interrupts/pins under the MSHW0153, so filter
+	 * it out here.
+	 */
+	if (gpiod_count(&pdev->dev, NULL) < 0)
+		return -ENODEV;
+
+	status = devm_acpi_dev_add_driver_gpios(&pdev->dev, shps_acpi_gpios);
+	if (status)
+		return status;
+
+	sdev = devm_kzalloc(&pdev->dev, sizeof(*sdev), GFP_KERNEL);
+	if (!sdev)
+		return -ENOMEM;
+
+	platform_set_drvdata(pdev, sdev);
+
+	/*
+	 * Initialize IRQs so that we can safely call surface_hotplug_remove()
+	 * on errors.
+	 */
+	for (i = 0; i < SHPS_NUM_IRQS; i++)
+		sdev->irq[i] = SHPS_IRQ_NOT_PRESENT;
+
+	/* Set up IRQs. */
+	for (i = 0; i < SHPS_NUM_IRQS; i++) {
+		mutex_init(&sdev->lock[i]);
+
+		status = shps_setup_irq(pdev, i);
+		if (status) {
+			dev_err(&pdev->dev, "failed to set up IRQ %d: %d\n", i, status);
+			goto err;
+		}
+	}
+
+	/* Ensure everything is up-to-date. */
+	for (i = 0; i < SHPS_NUM_IRQS; i++)
+		if (sdev->irq[i] != SHPS_IRQ_NOT_PRESENT)
+			shps_dsm_notify_irq(pdev, i);
+
+	return 0;
+
+err:
+	surface_hotplug_remove(pdev);
+	return status;
+}
+
+static const struct acpi_device_id surface_hotplug_acpi_match[] = {
+	{ "MSHW0153", 0 },
+	{ },
+};
+MODULE_DEVICE_TABLE(acpi, surface_hotplug_acpi_match);
+
+static struct platform_driver surface_hotplug_driver = {
+	.probe = surface_hotplug_probe,
+	.remove = surface_hotplug_remove,
+	.driver = {
+		.name = "surface_hotplug",
+		.acpi_match_table = surface_hotplug_acpi_match,
+		.probe_type = PROBE_PREFER_ASYNCHRONOUS,
+	},
+};
+module_platform_driver(surface_hotplug_driver);
+
+MODULE_AUTHOR("Maximilian Luz <luzmaximilian@gmail.com>");
+MODULE_DESCRIPTION("Surface Hot-Plug Signaling Driver for Surface Book Devices");
+MODULE_LICENSE("GPL");
diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig
index 91e6176cdfbd..56353e8c792a 100644
--- a/drivers/platform/x86/Kconfig
+++ b/drivers/platform/x86/Kconfig
@@ -49,18 +49,6 @@ config WMI_BMOF
 	  To compile this driver as a module, choose M here: the module will
 	  be called wmi-bmof.
 
-config ALIENWARE_WMI
-	tristate "Alienware Special feature control"
-	depends on ACPI
-	depends on LEDS_CLASS
-	depends on NEW_LEDS
-	depends on ACPI_WMI
-	help
-	 This is a driver for controlling Alienware BIOS driven
-	 features.  It exposes an interface for controlling the AlienFX
-	 zones on Alienware machines that don't contain a dedicated AlienFX
-	 USB MCU such as the X51 and X51-R2.
-
 config HUAWEI_WMI
 	tristate "Huawei WMI laptop extras driver"
 	depends on ACPI_BATTERY
@@ -327,169 +315,7 @@ config EEEPC_WMI
 	  If you have an ACPI-WMI compatible Eee PC laptop (>= 1000), say Y or M
 	  here.
 
-config DCDBAS
-	tristate "Dell Systems Management Base Driver"
-	depends on X86
-	help
-	  The Dell Systems Management Base Driver provides a sysfs interface
-	  for systems management software to perform System Management
-	  Interrupts (SMIs) and Host Control Actions (system power cycle or
-	  power off after OS shutdown) on certain Dell systems.
-
-	  See <file:Documentation/driver-api/dcdbas.rst> for more details on the driver
-	  and the Dell systems on which Dell systems management software makes
-	  use of this driver.
-
-	  Say Y or M here to enable the driver for use by Dell systems
-	  management software such as Dell OpenManage.
-
-#
-# The DELL_SMBIOS driver depends on ACPI_WMI and/or DCDBAS if those
-# backends are selected. The "depends" line prevents a configuration
-# where DELL_SMBIOS=y while either of those dependencies =m.
-#
-config DELL_SMBIOS
-	tristate "Dell SMBIOS driver"
-	depends on DCDBAS || DCDBAS=n
-	depends on ACPI_WMI || ACPI_WMI=n
-	help
-	This provides support for the Dell SMBIOS calling interface.
-	If you have a Dell computer you should enable this option.
-
-	Be sure to select at least one backend for it to work properly.
-
-config DELL_SMBIOS_WMI
-	bool "Dell SMBIOS driver WMI backend"
-	default y
-	depends on ACPI_WMI
-	select DELL_WMI_DESCRIPTOR
-	depends on DELL_SMBIOS
-	help
-	This provides an implementation for the Dell SMBIOS calling interface
-	communicated over ACPI-WMI.
-
-	If you have a Dell computer from >2007 you should say Y here.
-	If you aren't sure and this module doesn't work for your computer
-	it just won't load.
-
-config DELL_SMBIOS_SMM
-	bool "Dell SMBIOS driver SMM backend"
-	default y
-	depends on DCDBAS
-	depends on DELL_SMBIOS
-	help
-	This provides an implementation for the Dell SMBIOS calling interface
-	communicated over SMI/SMM.
-
-	If you have a Dell computer from <=2017 you should say Y here.
-	If you aren't sure and this module doesn't work for your computer
-	it just won't load.
-
-config DELL_LAPTOP
-	tristate "Dell Laptop Extras"
-	depends on DMI
-	depends on BACKLIGHT_CLASS_DEVICE
-	depends on ACPI_VIDEO || ACPI_VIDEO = n
-	depends on RFKILL || RFKILL = n
-	depends on SERIO_I8042
-	depends on DELL_SMBIOS
-	select POWER_SUPPLY
-	select LEDS_CLASS
-	select NEW_LEDS
-	select LEDS_TRIGGERS
-	select LEDS_TRIGGER_AUDIO
-	help
-	This driver adds support for rfkill and backlight control to Dell
-	laptops (except for some models covered by the Compal driver).
-
-config DELL_RBTN
-	tristate "Dell Airplane Mode Switch driver"
-	depends on ACPI
-	depends on INPUT
-	depends on RFKILL
-	help
-	  Say Y here if you want to support Dell Airplane Mode Switch ACPI
-	  device on Dell laptops. Sometimes it has names: DELLABCE or DELRBTN.
-	  This driver register rfkill device or input hotkey device depending
-	  on hardware type (hw switch slider or keyboard toggle button). For
-	  rfkill devices it receive HW switch events and set correct hard
-	  rfkill state.
-
-	  To compile this driver as a module, choose M here: the module will
-	  be called dell-rbtn.
-
-config DELL_RBU
-	tristate "BIOS update support for DELL systems via sysfs"
-	depends on X86
-	select FW_LOADER
-	select FW_LOADER_USER_HELPER
-	help
-	 Say m if you want to have the option of updating the BIOS for your
-	 DELL system. Note you need a Dell OpenManage or Dell Update package (DUP)
-	 supporting application to communicate with the BIOS regarding the new
-	 image for the image update to take effect.
-	 See <file:Documentation/admin-guide/dell_rbu.rst> for more details on the driver.
-
-config DELL_SMO8800
-	tristate "Dell Latitude freefall driver (ACPI SMO88XX)"
-	depends on ACPI
-	help
-	  Say Y here if you want to support SMO88XX freefall devices
-	  on Dell Latitude laptops.
-
-	  To compile this driver as a module, choose M here: the module will
-	  be called dell-smo8800.
-
-config DELL_WMI
-	tristate "Dell WMI notifications"
-	depends on ACPI_WMI
-	depends on DMI
-	depends on INPUT
-	depends on ACPI_VIDEO || ACPI_VIDEO = n
-	depends on DELL_SMBIOS
-	select DELL_WMI_DESCRIPTOR
-	select INPUT_SPARSEKMAP
-	help
-	  Say Y here if you want to support WMI-based hotkeys on Dell laptops.
-
-	  To compile this driver as a module, choose M here: the module will
-	  be called dell-wmi.
-
-config DELL_WMI_SYSMAN
-	tristate "Dell WMI-based Systems management driver"
-	depends on ACPI_WMI
-	depends on DMI
-	select NLS
-	help
-	  This driver allows changing BIOS settings on many Dell machines from
-	  2018 and newer without the use of any additional software.
-
-	  To compile this driver as a module, choose M here: the module will
-	  be called dell-wmi-sysman.
-
-config DELL_WMI_DESCRIPTOR
-	tristate
-	depends on ACPI_WMI
-
-config DELL_WMI_AIO
-	tristate "WMI Hotkeys for Dell All-In-One series"
-	depends on ACPI_WMI
-	depends on INPUT
-	select INPUT_SPARSEKMAP
-	help
-	  Say Y here if you want to support WMI-based hotkeys on Dell
-	  All-In-One machines.
-
-	  To compile this driver as a module, choose M here: the module will
-	  be called dell-wmi-aio.
-
-config DELL_WMI_LED
-	tristate "External LED on Dell Business Netbooks"
-	depends on LEDS_CLASS
-	depends on ACPI_WMI
-	help
-	  This adds support for the Latitude 2100 and similar
-	  notebooks that have an external LED.
+source "drivers/platform/x86/dell/Kconfig"
 
 config AMILO_RFKILL
 	tristate "Fujitsu-Siemens Amilo rfkill support"
@@ -624,7 +450,10 @@ config IDEAPAD_LAPTOP
 	depends on BACKLIGHT_CLASS_DEVICE
 	depends on ACPI_VIDEO || ACPI_VIDEO = n
 	depends on ACPI_WMI || ACPI_WMI = n
+	depends on ACPI_PLATFORM_PROFILE
 	select INPUT_SPARSEKMAP
+	select NEW_LEDS
+	select LEDS_CLASS
 	help
 	  This is a driver for Lenovo IdeaPad netbooks contains drivers for
 	  rfkill switch, hotkey, fan control and backlight control.
@@ -655,6 +484,7 @@ config THINKPAD_ACPI
 	depends on RFKILL || RFKILL = n
 	depends on ACPI_VIDEO || ACPI_VIDEO = n
 	depends on BACKLIGHT_CLASS_DEVICE
+	depends on ACPI_PLATFORM_PROFILE
 	select HWMON
 	select NVRAM
 	select NEW_LEDS
@@ -1327,21 +1157,6 @@ config INTEL_CHTDC_TI_PWRBTN
 	  To compile this driver as a module, choose M here: the module
 	  will be called intel_chtdc_ti_pwrbtn.
 
-config INTEL_MFLD_THERMAL
-       tristate "Thermal driver for Intel Medfield platform"
-       depends on MFD_INTEL_MSIC && THERMAL
-       help
-         Say Y here to enable thermal driver support for the  Intel Medfield
-         platform.
-
-config INTEL_MID_POWER_BUTTON
-	tristate "power button driver for Intel MID platforms"
-	depends on INTEL_SCU && INPUT
-	help
-	  This driver handles the power button on the Intel MID platforms.
-
-	  If unsure, say N.
-
 config INTEL_MRFLD_PWRBTN
 	tristate "Intel Merrifield Basin Cove power button driver"
 	depends on INTEL_SOC_PMIC_MRFLD
@@ -1369,7 +1184,7 @@ config INTEL_PMC_CORE
 		- MPHY/PLL gating status (Sunrisepoint PCH only)
 
 config INTEL_PMT_CLASS
-	tristate "Intel Platform Monitoring Technology (PMT) Class driver"
+	tristate
 	help
 	  The Intel Platform Monitoring Technology (PMT) class driver provides
 	  the basic sysfs interface and file hierarchy uses by PMT devices.
@@ -1382,6 +1197,7 @@ config INTEL_PMT_CLASS
 
 config INTEL_PMT_TELEMETRY
 	tristate "Intel Platform Monitoring Technology (PMT) Telemetry driver"
+	depends on MFD_INTEL_PMT
 	select INTEL_PMT_CLASS
 	help
 	  The Intel Platform Monitory Technology (PMT) Telemetry driver provides
@@ -1393,6 +1209,7 @@ config INTEL_PMT_TELEMETRY
 
 config INTEL_PMT_CRASHLOG
 	tristate "Intel Platform Monitoring Technology (PMT) Crashlog driver"
+	depends on MFD_INTEL_PMT
 	select INTEL_PMT_CLASS
 	help
 	  The Intel Platform Monitoring Technology (PMT) crashlog driver provides
@@ -1439,6 +1256,14 @@ config INTEL_SCU_PLATFORM
 	  and SCU (sometimes called PMC as well). The driver currently
 	  supports Intel Elkhart Lake and compatible platforms.
 
+config INTEL_SCU_WDT
+	bool
+	default INTEL_SCU_PCI
+	depends on INTEL_MID_WATCHDOG
+	help
+	  This is a specific platform code to instantiate watchdog device
+	  on ACPI-based Intel MID platforms.
+
 config INTEL_SCU_IPC_UTIL
 	tristate "Intel SCU IPC utility driver"
 	depends on INTEL_SCU
diff --git a/drivers/platform/x86/Makefile b/drivers/platform/x86/Makefile
index 581475f59819..60d554073749 100644
--- a/drivers/platform/x86/Makefile
+++ b/drivers/platform/x86/Makefile
@@ -9,7 +9,6 @@ obj-$(CONFIG_ACPI_WMI)		+= wmi.o
 obj-$(CONFIG_WMI_BMOF)		+= wmi-bmof.o
 
 # WMI drivers
-obj-$(CONFIG_ALIENWARE_WMI)		+= alienware-wmi.o
 obj-$(CONFIG_HUAWEI_WMI)		+= huawei-wmi.o
 obj-$(CONFIG_INTEL_WMI_SBL_FW_UPDATE)	+= intel-wmi-sbl-fw-update.o
 obj-$(CONFIG_INTEL_WMI_THUNDERBOLT)	+= intel-wmi-thunderbolt.o
@@ -37,20 +36,7 @@ obj-$(CONFIG_EEEPC_LAPTOP)	+= eeepc-laptop.o
 obj-$(CONFIG_EEEPC_WMI)		+= eeepc-wmi.o
 
 # Dell
-obj-$(CONFIG_DCDBAS)			+= dcdbas.o
-obj-$(CONFIG_DELL_SMBIOS)		+= dell-smbios.o
-dell-smbios-objs			:= dell-smbios-base.o
-dell-smbios-$(CONFIG_DELL_SMBIOS_WMI)	+= dell-smbios-wmi.o
-dell-smbios-$(CONFIG_DELL_SMBIOS_SMM)	+= dell-smbios-smm.o
-obj-$(CONFIG_DELL_LAPTOP)		+= dell-laptop.o
-obj-$(CONFIG_DELL_RBTN)			+= dell-rbtn.o
-obj-$(CONFIG_DELL_RBU)			+= dell_rbu.o
-obj-$(CONFIG_DELL_SMO8800)		+= dell-smo8800.o
-obj-$(CONFIG_DELL_WMI)			+= dell-wmi.o
-obj-$(CONFIG_DELL_WMI_DESCRIPTOR)	+= dell-wmi-descriptor.o
-obj-$(CONFIG_DELL_WMI_AIO)		+= dell-wmi-aio.o
-obj-$(CONFIG_DELL_WMI_LED)		+= dell-wmi-led.o
-obj-$(CONFIG_DELL_WMI_SYSMAN)		+= dell-wmi-sysman/
+obj-$(CONFIG_X86_PLATFORM_DRIVERS_DELL)		+= dell/
 
 # Fujitsu
 obj-$(CONFIG_AMILO_RFKILL)	+= amilo-rfkill.o
@@ -137,8 +123,6 @@ obj-$(CONFIG_INTEL_UNCORE_FREQ_CONTROL)		+= intel-uncore-frequency.o
 # Intel PMIC / PMC / P-Unit devices
 obj-$(CONFIG_INTEL_BXTWC_PMIC_TMU)	+= intel_bxtwc_tmu.o
 obj-$(CONFIG_INTEL_CHTDC_TI_PWRBTN)	+= intel_chtdc_ti_pwrbtn.o
-obj-$(CONFIG_INTEL_MFLD_THERMAL)	+= intel_mid_thermal.o
-obj-$(CONFIG_INTEL_MID_POWER_BUTTON)	+= intel_mid_powerbtn.o
 obj-$(CONFIG_INTEL_MRFLD_PWRBTN)	+= intel_mrfld_pwrbtn.o
 obj-$(CONFIG_INTEL_PMC_CORE)		+= intel_pmc_core.o intel_pmc_core_pltdrv.o
 obj-$(CONFIG_INTEL_PMT_CLASS)		+= intel_pmt_class.o
@@ -148,6 +132,7 @@ obj-$(CONFIG_INTEL_PUNIT_IPC)		+= intel_punit_ipc.o
 obj-$(CONFIG_INTEL_SCU_IPC)		+= intel_scu_ipc.o
 obj-$(CONFIG_INTEL_SCU_PCI)		+= intel_scu_pcidrv.o
 obj-$(CONFIG_INTEL_SCU_PLATFORM)	+= intel_scu_pltdrv.o
+obj-$(CONFIG_INTEL_SCU_WDT)		+= intel_scu_wdt.o
 obj-$(CONFIG_INTEL_SCU_IPC_UTIL)	+= intel_scu_ipcutil.o
 obj-$(CONFIG_INTEL_TELEMETRY)		+= intel_telemetry_core.o \
 					   intel_telemetry_pltdrv.o \
diff --git a/drivers/platform/x86/acer-wmi.c b/drivers/platform/x86/acer-wmi.c
index c1a5357da885..85db9403cc14 100644
--- a/drivers/platform/x86/acer-wmi.c
+++ b/drivers/platform/x86/acer-wmi.c
@@ -30,7 +30,6 @@
 #include <linux/input/sparse-keymap.h>
 #include <acpi/video.h>
 
-ACPI_MODULE_NAME(KBUILD_MODNAME);
 MODULE_AUTHOR("Carlos Corbacho");
 MODULE_DESCRIPTION("Acer Laptop WMI Extras Driver");
 MODULE_LICENSE("GPL");
@@ -1605,7 +1604,8 @@ static void acer_kbd_dock_get_initial_state(void)
 
 	status = wmi_evaluate_method(WMID_GUID3, 0, 0x2, &input_buf, &output_buf);
 	if (ACPI_FAILURE(status)) {
-		ACPI_EXCEPTION((AE_INFO, status, "Error getting keyboard-dock initial status"));
+		pr_err("Error getting keyboard-dock initial status: %s\n",
+		       acpi_format_exception(status));
 		return;
 	}
 
diff --git a/drivers/platform/x86/amd-pmc.c b/drivers/platform/x86/amd-pmc.c
index ef8342572463..b9da58ee9b1e 100644
--- a/drivers/platform/x86/amd-pmc.c
+++ b/drivers/platform/x86/amd-pmc.c
@@ -210,31 +210,39 @@ static int amd_pmc_probe(struct platform_device *pdev)
 	dev->dev = &pdev->dev;
 
 	rdev = pci_get_domain_bus_and_slot(0, 0, PCI_DEVFN(0, 0));
-	if (!rdev || !pci_match_id(pmc_pci_ids, rdev))
+	if (!rdev || !pci_match_id(pmc_pci_ids, rdev)) {
+		pci_dev_put(rdev);
 		return -ENODEV;
+	}
 
 	dev->cpu_id = rdev->device;
 	err = pci_write_config_dword(rdev, AMD_PMC_SMU_INDEX_ADDRESS, AMD_PMC_BASE_ADDR_LO);
 	if (err) {
 		dev_err(dev->dev, "error writing to 0x%x\n", AMD_PMC_SMU_INDEX_ADDRESS);
+		pci_dev_put(rdev);
 		return pcibios_err_to_errno(err);
 	}
 
 	err = pci_read_config_dword(rdev, AMD_PMC_SMU_INDEX_DATA, &val);
-	if (err)
+	if (err) {
+		pci_dev_put(rdev);
 		return pcibios_err_to_errno(err);
+	}
 
 	base_addr_lo = val & AMD_PMC_BASE_ADDR_HI_MASK;
 
 	err = pci_write_config_dword(rdev, AMD_PMC_SMU_INDEX_ADDRESS, AMD_PMC_BASE_ADDR_HI);
 	if (err) {
 		dev_err(dev->dev, "error writing to 0x%x\n", AMD_PMC_SMU_INDEX_ADDRESS);
+		pci_dev_put(rdev);
 		return pcibios_err_to_errno(err);
 	}
 
 	err = pci_read_config_dword(rdev, AMD_PMC_SMU_INDEX_DATA, &val);
-	if (err)
+	if (err) {
+		pci_dev_put(rdev);
 		return pcibios_err_to_errno(err);
+	}
 
 	base_addr_hi = val & AMD_PMC_BASE_ADDR_LO_MASK;
 	pci_dev_put(rdev);
diff --git a/drivers/platform/x86/dell/Kconfig b/drivers/platform/x86/dell/Kconfig
new file mode 100644
index 000000000000..e0a55337f51a
--- /dev/null
+++ b/drivers/platform/x86/dell/Kconfig
@@ -0,0 +1,207 @@
+# SPDX-License-Identifier: GPL-2.0-only
+#
+# Dell X86 Platform Specific Drivers
+#
+
+menuconfig X86_PLATFORM_DRIVERS_DELL
+	bool "Dell X86 Platform Specific Device Drivers"
+	default n
+	depends on X86_PLATFORM_DEVICES
+	help
+	  Say Y here to get to see options for device drivers for various
+	  Dell x86 platforms, including vendor-specific laptop extension drivers.
+	  This option alone does not add any kernel code.
+
+	  If you say N, all options in this submenu will be skipped and disabled.
+
+if X86_PLATFORM_DRIVERS_DELL
+
+config ALIENWARE_WMI
+	tristate "Alienware Special feature control"
+	default m
+	depends on ACPI
+	depends on LEDS_CLASS
+	depends on NEW_LEDS
+	depends on ACPI_WMI
+	help
+	 This is a driver for controlling Alienware BIOS driven
+	 features.  It exposes an interface for controlling the AlienFX
+	 zones on Alienware machines that don't contain a dedicated AlienFX
+	 USB MCU such as the X51 and X51-R2.
+
+config DCDBAS
+	tristate "Dell Systems Management Base Driver"
+	default m
+	depends on X86
+	help
+	  The Dell Systems Management Base Driver provides a sysfs interface
+	  for systems management software to perform System Management
+	  Interrupts (SMIs) and Host Control Actions (system power cycle or
+	  power off after OS shutdown) on certain Dell systems.
+
+	  See <file:Documentation/driver-api/dcdbas.rst> for more details on the driver
+	  and the Dell systems on which Dell systems management software makes
+	  use of this driver.
+
+	  Say Y or M here to enable the driver for use by Dell systems
+	  management software such as Dell OpenManage.
+
+config DELL_LAPTOP
+	tristate "Dell Laptop Extras"
+	default m
+	depends on DMI
+	depends on BACKLIGHT_CLASS_DEVICE
+	depends on ACPI_VIDEO || ACPI_VIDEO = n
+	depends on RFKILL || RFKILL = n
+	depends on SERIO_I8042
+	depends on DELL_SMBIOS
+	select POWER_SUPPLY
+	select LEDS_CLASS
+	select NEW_LEDS
+	select LEDS_TRIGGERS
+	select LEDS_TRIGGER_AUDIO
+	help
+	This driver adds support for rfkill and backlight control to Dell
+	laptops (except for some models covered by the Compal driver).
+
+config DELL_RBU
+	tristate "BIOS update support for DELL systems via sysfs"
+	default m
+	depends on X86
+	select FW_LOADER
+	select FW_LOADER_USER_HELPER
+	help
+	 Say m if you want to have the option of updating the BIOS for your
+	 DELL system. Note you need a Dell OpenManage or Dell Update package (DUP)
+	 supporting application to communicate with the BIOS regarding the new
+	 image for the image update to take effect.
+	 See <file:Documentation/admin-guide/dell_rbu.rst> for more details on the driver.
+
+config DELL_RBTN
+	tristate "Dell Airplane Mode Switch driver"
+	default m
+	depends on ACPI
+	depends on INPUT
+	depends on RFKILL
+	help
+	  Say Y here if you want to support Dell Airplane Mode Switch ACPI
+	  device on Dell laptops. Sometimes it has names: DELLABCE or DELRBTN.
+	  This driver register rfkill device or input hotkey device depending
+	  on hardware type (hw switch slider or keyboard toggle button). For
+	  rfkill devices it receive HW switch events and set correct hard
+	  rfkill state.
+
+	  To compile this driver as a module, choose M here: the module will
+	  be called dell-rbtn.
+
+#
+# The DELL_SMBIOS driver depends on ACPI_WMI and/or DCDBAS if those
+# backends are selected. The "depends" line prevents a configuration
+# where DELL_SMBIOS=y while either of those dependencies =m.
+#
+config DELL_SMBIOS
+	tristate "Dell SMBIOS driver"
+	default m
+	depends on DCDBAS || DCDBAS=n
+	depends on ACPI_WMI || ACPI_WMI=n
+	help
+	This provides support for the Dell SMBIOS calling interface.
+	If you have a Dell computer you should enable this option.
+
+	Be sure to select at least one backend for it to work properly.
+
+config DELL_SMBIOS_WMI
+	bool "Dell SMBIOS driver WMI backend"
+	default y
+	depends on ACPI_WMI
+	select DELL_WMI_DESCRIPTOR
+	depends on DELL_SMBIOS
+	help
+	This provides an implementation for the Dell SMBIOS calling interface
+	communicated over ACPI-WMI.
+
+	If you have a Dell computer from >2007 you should say Y here.
+	If you aren't sure and this module doesn't work for your computer
+	it just won't load.
+
+config DELL_SMBIOS_SMM
+	bool "Dell SMBIOS driver SMM backend"
+	default y
+	depends on DCDBAS
+	depends on DELL_SMBIOS
+	help
+	This provides an implementation for the Dell SMBIOS calling interface
+	communicated over SMI/SMM.
+
+	If you have a Dell computer from <=2017 you should say Y here.
+	If you aren't sure and this module doesn't work for your computer
+	it just won't load.
+
+config DELL_SMO8800
+	tristate "Dell Latitude freefall driver (ACPI SMO88XX)"
+	default m
+	depends on ACPI
+	help
+	  Say Y here if you want to support SMO88XX freefall devices
+	  on Dell Latitude laptops.
+
+	  To compile this driver as a module, choose M here: the module will
+	  be called dell-smo8800.
+
+config DELL_WMI
+	tristate "Dell WMI notifications"
+	default m
+	depends on ACPI_WMI
+	depends on DMI
+	depends on INPUT
+	depends on ACPI_VIDEO || ACPI_VIDEO = n
+	depends on DELL_SMBIOS
+	select DELL_WMI_DESCRIPTOR
+	select INPUT_SPARSEKMAP
+	help
+	  Say Y here if you want to support WMI-based hotkeys on Dell laptops.
+
+	  To compile this driver as a module, choose M here: the module will
+	  be called dell-wmi.
+
+config DELL_WMI_AIO
+	tristate "WMI Hotkeys for Dell All-In-One series"
+	default m
+	depends on ACPI_WMI
+	depends on INPUT
+	select INPUT_SPARSEKMAP
+	help
+	  Say Y here if you want to support WMI-based hotkeys on Dell
+	  All-In-One machines.
+
+	  To compile this driver as a module, choose M here: the module will
+	  be called dell-wmi-aio.
+
+config DELL_WMI_DESCRIPTOR
+	tristate
+	default m
+	depends on ACPI_WMI
+
+config DELL_WMI_LED
+	tristate "External LED on Dell Business Netbooks"
+	default m
+	depends on LEDS_CLASS
+	depends on ACPI_WMI
+	help
+	  This adds support for the Latitude 2100 and similar
+	  notebooks that have an external LED.
+
+config DELL_WMI_SYSMAN
+	tristate "Dell WMI-based Systems management driver"
+	default m
+	depends on ACPI_WMI
+	depends on DMI
+	select NLS
+	help
+	  This driver allows changing BIOS settings on many Dell machines from
+	  2018 and newer without the use of any additional software.
+
+	  To compile this driver as a module, choose M here: the module will
+	  be called dell-wmi-sysman.
+
+endif # X86_PLATFORM_DRIVERS_DELL
diff --git a/drivers/platform/x86/dell/Makefile b/drivers/platform/x86/dell/Makefile
new file mode 100644
index 000000000000..d720a3e42ae3
--- /dev/null
+++ b/drivers/platform/x86/dell/Makefile
@@ -0,0 +1,21 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# Makefile for linux/drivers/platform/x86/dell
+# Dell x86 Platform-Specific Drivers
+#
+
+obj-$(CONFIG_ALIENWARE_WMI)		+= alienware-wmi.o
+obj-$(CONFIG_DCDBAS)			+= dcdbas.o
+obj-$(CONFIG_DELL_LAPTOP)		+= dell-laptop.o
+obj-$(CONFIG_DELL_RBTN)			+= dell-rbtn.o
+obj-$(CONFIG_DELL_RBU)			+= dell_rbu.o
+obj-$(CONFIG_DELL_SMBIOS)		+= dell-smbios.o
+dell-smbios-objs			:= dell-smbios-base.o
+dell-smbios-$(CONFIG_DELL_SMBIOS_WMI)	+= dell-smbios-wmi.o
+dell-smbios-$(CONFIG_DELL_SMBIOS_SMM)	+= dell-smbios-smm.o
+obj-$(CONFIG_DELL_SMO8800)		+= dell-smo8800.o
+obj-$(CONFIG_DELL_WMI)			+= dell-wmi.o
+obj-$(CONFIG_DELL_WMI_AIO)		+= dell-wmi-aio.o
+obj-$(CONFIG_DELL_WMI_DESCRIPTOR)	+= dell-wmi-descriptor.o
+obj-$(CONFIG_DELL_WMI_LED)		+= dell-wmi-led.o
+obj-$(CONFIG_DELL_WMI_SYSMAN)		+= dell-wmi-sysman/
diff --git a/drivers/platform/x86/alienware-wmi.c b/drivers/platform/x86/dell/alienware-wmi.c
index 5bb2859c8285..5bb2859c8285 100644
--- a/drivers/platform/x86/alienware-wmi.c
+++ b/drivers/platform/x86/dell/alienware-wmi.c
diff --git a/drivers/platform/x86/dcdbas.c b/drivers/platform/x86/dell/dcdbas.c
index d513a59a5d47..d513a59a5d47 100644
--- a/drivers/platform/x86/dcdbas.c
+++ b/drivers/platform/x86/dell/dcdbas.c
diff --git a/drivers/platform/x86/dcdbas.h b/drivers/platform/x86/dell/dcdbas.h
index c3cca5433525..c3cca5433525 100644
--- a/drivers/platform/x86/dcdbas.h
+++ b/drivers/platform/x86/dell/dcdbas.h
diff --git a/drivers/platform/x86/dell-laptop.c b/drivers/platform/x86/dell/dell-laptop.c
index 70edc5bb3a14..70edc5bb3a14 100644
--- a/drivers/platform/x86/dell-laptop.c
+++ b/drivers/platform/x86/dell/dell-laptop.c
diff --git a/drivers/platform/x86/dell-rbtn.c b/drivers/platform/x86/dell/dell-rbtn.c
index a89fad47ff13..a89fad47ff13 100644
--- a/drivers/platform/x86/dell-rbtn.c
+++ b/drivers/platform/x86/dell/dell-rbtn.c
diff --git a/drivers/platform/x86/dell-rbtn.h b/drivers/platform/x86/dell/dell-rbtn.h
index 5e030f926c58..5e030f926c58 100644
--- a/drivers/platform/x86/dell-rbtn.h
+++ b/drivers/platform/x86/dell/dell-rbtn.h
diff --git a/drivers/platform/x86/dell-smbios-base.c b/drivers/platform/x86/dell/dell-smbios-base.c
index 3a1dbf199441..3a1dbf199441 100644
--- a/drivers/platform/x86/dell-smbios-base.c
+++ b/drivers/platform/x86/dell/dell-smbios-base.c
diff --git a/drivers/platform/x86/dell-smbios-smm.c b/drivers/platform/x86/dell/dell-smbios-smm.c
index 97c52a839a3e..97c52a839a3e 100644
--- a/drivers/platform/x86/dell-smbios-smm.c
+++ b/drivers/platform/x86/dell/dell-smbios-smm.c
diff --git a/drivers/platform/x86/dell-smbios-wmi.c b/drivers/platform/x86/dell/dell-smbios-wmi.c
index 27a298b7c541..27a298b7c541 100644
--- a/drivers/platform/x86/dell-smbios-wmi.c
+++ b/drivers/platform/x86/dell/dell-smbios-wmi.c
diff --git a/drivers/platform/x86/dell-smbios.h b/drivers/platform/x86/dell/dell-smbios.h
index 75fa8ea0476d..75fa8ea0476d 100644
--- a/drivers/platform/x86/dell-smbios.h
+++ b/drivers/platform/x86/dell/dell-smbios.h
diff --git a/drivers/platform/x86/dell-smo8800.c b/drivers/platform/x86/dell/dell-smo8800.c
index 5d9304a7de1b..5d9304a7de1b 100644
--- a/drivers/platform/x86/dell-smo8800.c
+++ b/drivers/platform/x86/dell/dell-smo8800.c
diff --git a/drivers/platform/x86/dell-wmi-aio.c b/drivers/platform/x86/dell/dell-wmi-aio.c
index c7b7f1e403fb..c7b7f1e403fb 100644
--- a/drivers/platform/x86/dell-wmi-aio.c
+++ b/drivers/platform/x86/dell/dell-wmi-aio.c
diff --git a/drivers/platform/x86/dell-wmi-descriptor.c b/drivers/platform/x86/dell/dell-wmi-descriptor.c
index a068900ae8a1..a068900ae8a1 100644
--- a/drivers/platform/x86/dell-wmi-descriptor.c
+++ b/drivers/platform/x86/dell/dell-wmi-descriptor.c
diff --git a/drivers/platform/x86/dell-wmi-descriptor.h b/drivers/platform/x86/dell/dell-wmi-descriptor.h
index 1f469fef1535..1f469fef1535 100644
--- a/drivers/platform/x86/dell-wmi-descriptor.h
+++ b/drivers/platform/x86/dell/dell-wmi-descriptor.h
diff --git a/drivers/platform/x86/dell-wmi-led.c b/drivers/platform/x86/dell/dell-wmi-led.c
index 5bedaf7f0633..5bedaf7f0633 100644
--- a/drivers/platform/x86/dell-wmi-led.c
+++ b/drivers/platform/x86/dell/dell-wmi-led.c
diff --git a/drivers/platform/x86/dell-wmi-sysman/Makefile b/drivers/platform/x86/dell/dell-wmi-sysman/Makefile
index 825fb2fbeea8..825fb2fbeea8 100644
--- a/drivers/platform/x86/dell-wmi-sysman/Makefile
+++ b/drivers/platform/x86/dell/dell-wmi-sysman/Makefile
diff --git a/drivers/platform/x86/dell-wmi-sysman/biosattr-interface.c b/drivers/platform/x86/dell/dell-wmi-sysman/biosattr-interface.c
index f95d8ddace5a..f95d8ddace5a 100644
--- a/drivers/platform/x86/dell-wmi-sysman/biosattr-interface.c
+++ b/drivers/platform/x86/dell/dell-wmi-sysman/biosattr-interface.c
diff --git a/drivers/platform/x86/dell-wmi-sysman/dell-wmi-sysman.h b/drivers/platform/x86/dell/dell-wmi-sysman/dell-wmi-sysman.h
index b80f2a62ea3f..b80f2a62ea3f 100644
--- a/drivers/platform/x86/dell-wmi-sysman/dell-wmi-sysman.h
+++ b/drivers/platform/x86/dell/dell-wmi-sysman/dell-wmi-sysman.h
diff --git a/drivers/platform/x86/dell-wmi-sysman/enum-attributes.c b/drivers/platform/x86/dell/dell-wmi-sysman/enum-attributes.c
index 80f4b7785c6c..80f4b7785c6c 100644
--- a/drivers/platform/x86/dell-wmi-sysman/enum-attributes.c
+++ b/drivers/platform/x86/dell/dell-wmi-sysman/enum-attributes.c
diff --git a/drivers/platform/x86/dell-wmi-sysman/int-attributes.c b/drivers/platform/x86/dell/dell-wmi-sysman/int-attributes.c
index 75aedbb733be..75aedbb733be 100644
--- a/drivers/platform/x86/dell-wmi-sysman/int-attributes.c
+++ b/drivers/platform/x86/dell/dell-wmi-sysman/int-attributes.c
diff --git a/drivers/platform/x86/dell-wmi-sysman/passobj-attributes.c b/drivers/platform/x86/dell/dell-wmi-sysman/passobj-attributes.c
index 3abcd95477c0..3abcd95477c0 100644
--- a/drivers/platform/x86/dell-wmi-sysman/passobj-attributes.c
+++ b/drivers/platform/x86/dell/dell-wmi-sysman/passobj-attributes.c
diff --git a/drivers/platform/x86/dell-wmi-sysman/passwordattr-interface.c b/drivers/platform/x86/dell/dell-wmi-sysman/passwordattr-interface.c
index 5780b4d94759..5780b4d94759 100644
--- a/drivers/platform/x86/dell-wmi-sysman/passwordattr-interface.c
+++ b/drivers/platform/x86/dell/dell-wmi-sysman/passwordattr-interface.c
diff --git a/drivers/platform/x86/dell-wmi-sysman/string-attributes.c b/drivers/platform/x86/dell/dell-wmi-sysman/string-attributes.c
index ac75dce88a4c..ac75dce88a4c 100644
--- a/drivers/platform/x86/dell-wmi-sysman/string-attributes.c
+++ b/drivers/platform/x86/dell/dell-wmi-sysman/string-attributes.c
diff --git a/drivers/platform/x86/dell-wmi-sysman/sysman.c b/drivers/platform/x86/dell/dell-wmi-sysman/sysman.c
index cb81010ba1a2..cb81010ba1a2 100644
--- a/drivers/platform/x86/dell-wmi-sysman/sysman.c
+++ b/drivers/platform/x86/dell/dell-wmi-sysman/sysman.c
diff --git a/drivers/platform/x86/dell-wmi.c b/drivers/platform/x86/dell/dell-wmi.c
index bbdb3e860892..bbdb3e860892 100644
--- a/drivers/platform/x86/dell-wmi.c
+++ b/drivers/platform/x86/dell/dell-wmi.c
diff --git a/drivers/platform/x86/dell_rbu.c b/drivers/platform/x86/dell/dell_rbu.c
index 03c3ff34bcf5..03c3ff34bcf5 100644
--- a/drivers/platform/x86/dell_rbu.c
+++ b/drivers/platform/x86/dell/dell_rbu.c
diff --git a/drivers/platform/x86/ideapad-laptop.c b/drivers/platform/x86/ideapad-laptop.c
index 5b81bafa5c16..6cb5ad4be231 100644
--- a/drivers/platform/x86/ideapad-laptop.c
+++ b/drivers/platform/x86/ideapad-laptop.c
@@ -8,33 +8,34 @@
 
 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
 
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/types.h>
 #include <linux/acpi.h>
-#include <linux/rfkill.h>
-#include <linux/platform_device.h>
-#include <linux/input.h>
-#include <linux/input/sparse-keymap.h>
 #include <linux/backlight.h>
-#include <linux/fb.h>
+#include <linux/bitops.h>
+#include <linux/bug.h>
 #include <linux/debugfs.h>
-#include <linux/seq_file.h>
-#include <linux/i8042.h>
-#include <linux/dmi.h>
 #include <linux/device.h>
-#include <acpi/video.h>
+#include <linux/dmi.h>
+#include <linux/fb.h>
+#include <linux/i8042.h>
+#include <linux/init.h>
+#include <linux/input.h>
+#include <linux/input/sparse-keymap.h>
+#include <linux/jiffies.h>
+#include <linux/kernel.h>
+#include <linux/leds.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/platform_profile.h>
+#include <linux/rfkill.h>
+#include <linux/seq_file.h>
+#include <linux/sysfs.h>
+#include <linux/types.h>
 
-#define IDEAPAD_RFKILL_DEV_NUM	(3)
+#include <acpi/video.h>
 
-#define BM_CONSERVATION_BIT (5)
-#define HA_FNLOCK_BIT       (10)
+#include <dt-bindings/leds/common.h>
 
-#define CFG_BT_BIT	(16)
-#define CFG_3G_BIT	(17)
-#define CFG_WIFI_BIT	(18)
-#define CFG_CAMERA_BIT	(19)
+#define IDEAPAD_RFKILL_DEV_NUM	3
 
 #if IS_ENABLED(CONFIG_ACPI_WMI)
 static const char *const ideapad_wmi_fnesc_events[] = {
@@ -44,10 +45,39 @@ static const char *const ideapad_wmi_fnesc_events[] = {
 #endif
 
 enum {
-	BMCMD_CONSERVATION_ON = 3,
-	BMCMD_CONSERVATION_OFF = 5,
-	HACMD_FNLOCK_ON = 0xe,
-	HACMD_FNLOCK_OFF = 0xf,
+	CFG_CAP_BT_BIT       = 16,
+	CFG_CAP_3G_BIT       = 17,
+	CFG_CAP_WIFI_BIT     = 18,
+	CFG_CAP_CAM_BIT      = 19,
+	CFG_CAP_TOUCHPAD_BIT = 30,
+};
+
+enum {
+	GBMD_CONSERVATION_STATE_BIT = 5,
+};
+
+enum {
+	SMBC_CONSERVATION_ON  = 3,
+	SMBC_CONSERVATION_OFF = 5,
+};
+
+enum {
+	HALS_KBD_BL_SUPPORT_BIT       = 4,
+	HALS_KBD_BL_STATE_BIT         = 5,
+	HALS_USB_CHARGING_SUPPORT_BIT = 6,
+	HALS_USB_CHARGING_STATE_BIT   = 7,
+	HALS_FNLOCK_SUPPORT_BIT       = 9,
+	HALS_FNLOCK_STATE_BIT         = 10,
+	HALS_HOTKEYS_PRIMARY_BIT      = 11,
+};
+
+enum {
+	SALS_KBD_BL_ON        = 0x8,
+	SALS_KBD_BL_OFF       = 0x9,
+	SALS_USB_CHARGING_ON  = 0xa,
+	SALS_USB_CHARGING_OFF = 0xb,
+	SALS_FNLOCK_ON        = 0xe,
+	SALS_FNLOCK_OFF       = 0xf,
 };
 
 enum {
@@ -77,6 +107,13 @@ enum {
 	VPCCMD_W_BL_POWER = 0x33,
 };
 
+struct ideapad_dytc_priv {
+	enum platform_profile_option current_profile;
+	struct platform_profile_handler pprof;
+	struct mutex mutex; /* protects the DYTC interface */
+	struct ideapad_private *priv;
+};
+
 struct ideapad_rfk_priv {
 	int dev;
 	struct ideapad_private *priv;
@@ -89,11 +126,25 @@ struct ideapad_private {
 	struct platform_device *platform_device;
 	struct input_dev *inputdev;
 	struct backlight_device *blightdev;
+	struct ideapad_dytc_priv *dytc;
 	struct dentry *debug;
 	unsigned long cfg;
-	bool has_hw_rfkill_switch;
-	bool has_touchpad_switch;
 	const char *fnesc_guid;
+	struct {
+		bool conservation_mode    : 1;
+		bool dytc                 : 1;
+		bool fan_mode             : 1;
+		bool fn_lock              : 1;
+		bool hw_rfkill_switch     : 1;
+		bool kbd_bl               : 1;
+		bool touchpad_ctrl_via_ec : 1;
+		bool usb_charging         : 1;
+	} features;
+	struct {
+		bool initialized;
+		struct led_classdev led;
+		unsigned int last_brightness;
+	} kbd_bl;
 };
 
 static bool no_bt_rfkill;
@@ -103,64 +154,82 @@ MODULE_PARM_DESC(no_bt_rfkill, "No rfkill for bluetooth.");
 /*
  * ACPI Helpers
  */
-#define IDEAPAD_EC_TIMEOUT (200) /* in ms */
+#define IDEAPAD_EC_TIMEOUT 200 /* in ms */
 
-static int read_method_int(acpi_handle handle, const char *method, int *val)
+static int eval_int(acpi_handle handle, const char *name, unsigned long *res)
 {
-	acpi_status status;
 	unsigned long long result;
+	acpi_status status;
+
+	status = acpi_evaluate_integer(handle, (char *)name, NULL, &result);
+	if (ACPI_FAILURE(status))
+		return -EIO;
+
+	*res = result;
 
-	status = acpi_evaluate_integer(handle, (char *)method, NULL, &result);
-	if (ACPI_FAILURE(status)) {
-		*val = -1;
-		return -1;
-	}
-	*val = result;
 	return 0;
+}
+
+static int exec_simple_method(acpi_handle handle, const char *name, unsigned long arg)
+{
+	acpi_status status = acpi_execute_simple_method(handle, (char *)name, arg);
 
+	return ACPI_FAILURE(status) ? -EIO : 0;
 }
 
-static int method_gbmd(acpi_handle handle, unsigned long *ret)
+static int eval_gbmd(acpi_handle handle, unsigned long *res)
 {
-	int result, val;
+	return eval_int(handle, "GBMD", res);
+}
 
-	result = read_method_int(handle, "GBMD", &val);
-	*ret = val;
-	return result;
+static int exec_smbc(acpi_handle handle, unsigned long arg)
+{
+	return exec_simple_method(handle, "SMBC", arg);
 }
 
-static int method_int1(acpi_handle handle, char *method, int cmd)
+static int eval_hals(acpi_handle handle, unsigned long *res)
 {
-	acpi_status status;
+	return eval_int(handle, "HALS", res);
+}
 
-	status = acpi_execute_simple_method(handle, method, cmd);
-	return ACPI_FAILURE(status) ? -1 : 0;
+static int exec_sals(acpi_handle handle, unsigned long arg)
+{
+	return exec_simple_method(handle, "SALS", arg);
 }
 
-static int method_vpcr(acpi_handle handle, int cmd, int *ret)
+static int eval_int_with_arg(acpi_handle handle, const char *name, unsigned long arg, unsigned long *res)
 {
-	acpi_status status;
-	unsigned long long result;
 	struct acpi_object_list params;
+	unsigned long long result;
 	union acpi_object in_obj;
+	acpi_status status;
 
 	params.count = 1;
 	params.pointer = &in_obj;
 	in_obj.type = ACPI_TYPE_INTEGER;
-	in_obj.integer.value = cmd;
+	in_obj.integer.value = arg;
+
+	status = acpi_evaluate_integer(handle, (char *)name, &params, &result);
+	if (ACPI_FAILURE(status))
+		return -EIO;
 
-	status = acpi_evaluate_integer(handle, "VPCR", &params, &result);
+	if (res)
+		*res = result;
 
-	if (ACPI_FAILURE(status)) {
-		*ret = -1;
-		return -1;
-	}
-	*ret = result;
 	return 0;
+}
 
+static int eval_dytc(acpi_handle handle, unsigned long cmd, unsigned long *res)
+{
+	return eval_int_with_arg(handle, "DYTC", cmd, res);
 }
 
-static int method_vpcw(acpi_handle handle, int cmd, int data)
+static int eval_vpcr(acpi_handle handle, unsigned long cmd, unsigned long *res)
+{
+	return eval_int_with_arg(handle, "VPCR", cmd, res);
+}
+
+static int eval_vpcw(acpi_handle handle, unsigned long cmd, unsigned long data)
 {
 	struct acpi_object_list params;
 	union acpi_object in_obj[2];
@@ -174,55 +243,68 @@ static int method_vpcw(acpi_handle handle, int cmd, int data)
 	in_obj[1].integer.value = data;
 
 	status = acpi_evaluate_object(handle, "VPCW", &params, NULL);
-	if (status != AE_OK)
-		return -1;
+	if (ACPI_FAILURE(status))
+		return -EIO;
+
 	return 0;
 }
 
-static int read_ec_data(acpi_handle handle, int cmd, unsigned long *data)
+static int read_ec_data(acpi_handle handle, unsigned long cmd, unsigned long *data)
 {
-	int val;
-	unsigned long int end_jiffies;
+	unsigned long end_jiffies, val;
+	int err;
+
+	err = eval_vpcw(handle, 1, cmd);
+	if (err)
+		return err;
 
-	if (method_vpcw(handle, 1, cmd))
-		return -1;
+	end_jiffies = jiffies + msecs_to_jiffies(IDEAPAD_EC_TIMEOUT) + 1;
 
-	for (end_jiffies = jiffies+(HZ)*IDEAPAD_EC_TIMEOUT/1000+1;
-	     time_before(jiffies, end_jiffies);) {
+	while (time_before(jiffies, end_jiffies)) {
 		schedule();
-		if (method_vpcr(handle, 1, &val))
-			return -1;
-		if (val == 0) {
-			if (method_vpcr(handle, 0, &val))
-				return -1;
-			*data = val;
-			return 0;
-		}
+
+		err = eval_vpcr(handle, 1, &val);
+		if (err)
+			return err;
+
+		if (val == 0)
+			return eval_vpcr(handle, 0, data);
 	}
-	pr_err("timeout in %s\n", __func__);
-	return -1;
+
+	acpi_handle_err(handle, "timeout in %s\n", __func__);
+
+	return -ETIMEDOUT;
 }
 
-static int write_ec_cmd(acpi_handle handle, int cmd, unsigned long data)
+static int write_ec_cmd(acpi_handle handle, unsigned long cmd, unsigned long data)
 {
-	int val;
-	unsigned long int end_jiffies;
+	unsigned long end_jiffies, val;
+	int err;
+
+	err = eval_vpcw(handle, 0, data);
+	if (err)
+		return err;
+
+	err = eval_vpcw(handle, 1, cmd);
+	if (err)
+		return err;
 
-	if (method_vpcw(handle, 0, data))
-		return -1;
-	if (method_vpcw(handle, 1, cmd))
-		return -1;
+	end_jiffies = jiffies + msecs_to_jiffies(IDEAPAD_EC_TIMEOUT) + 1;
 
-	for (end_jiffies = jiffies+(HZ)*IDEAPAD_EC_TIMEOUT/1000+1;
-	     time_before(jiffies, end_jiffies);) {
+	while (time_before(jiffies, end_jiffies)) {
 		schedule();
-		if (method_vpcr(handle, 1, &val))
-			return -1;
+
+		err = eval_vpcr(handle, 1, &val);
+		if (err)
+			return err;
+
 		if (val == 0)
 			return 0;
 	}
-	pr_err("timeout in %s\n", __func__);
-	return -1;
+
+	acpi_handle_err(handle, "timeout in %s\n", __func__);
+
+	return -ETIMEDOUT;
 }
 
 /*
@@ -233,44 +315,37 @@ static int debugfs_status_show(struct seq_file *s, void *data)
 	struct ideapad_private *priv = s->private;
 	unsigned long value;
 
-	if (!priv)
-		return -EINVAL;
-
 	if (!read_ec_data(priv->adev->handle, VPCCMD_R_BL_MAX, &value))
-		seq_printf(s, "Backlight max:\t%lu\n", value);
+		seq_printf(s, "Backlight max:  %lu\n", value);
 	if (!read_ec_data(priv->adev->handle, VPCCMD_R_BL, &value))
-		seq_printf(s, "Backlight now:\t%lu\n", value);
+		seq_printf(s, "Backlight now:  %lu\n", value);
 	if (!read_ec_data(priv->adev->handle, VPCCMD_R_BL_POWER, &value))
-		seq_printf(s, "BL power value:\t%s\n", value ? "On" : "Off");
-	seq_printf(s, "=====================\n");
+		seq_printf(s, "BL power value: %s (%lu)\n", value ? "on" : "off", value);
+
+	seq_puts(s, "=====================\n");
 
 	if (!read_ec_data(priv->adev->handle, VPCCMD_R_RF, &value))
-		seq_printf(s, "Radio status:\t%s(%lu)\n",
-			   value ? "On" : "Off", value);
+		seq_printf(s, "Radio status: %s (%lu)\n", value ? "on" : "off", value);
 	if (!read_ec_data(priv->adev->handle, VPCCMD_R_WIFI, &value))
-		seq_printf(s, "Wifi status:\t%s(%lu)\n",
-			   value ? "On" : "Off", value);
+		seq_printf(s, "Wifi status:  %s (%lu)\n", value ? "on" : "off", value);
 	if (!read_ec_data(priv->adev->handle, VPCCMD_R_BT, &value))
-		seq_printf(s, "BT status:\t%s(%lu)\n",
-			   value ? "On" : "Off", value);
+		seq_printf(s, "BT status:    %s (%lu)\n", value ? "on" : "off", value);
 	if (!read_ec_data(priv->adev->handle, VPCCMD_R_3G, &value))
-		seq_printf(s, "3G status:\t%s(%lu)\n",
-			   value ? "On" : "Off", value);
-	seq_printf(s, "=====================\n");
+		seq_printf(s, "3G status:    %s (%lu)\n", value ? "on" : "off", value);
+
+	seq_puts(s, "=====================\n");
 
 	if (!read_ec_data(priv->adev->handle, VPCCMD_R_TOUCHPAD, &value))
-		seq_printf(s, "Touchpad status:%s(%lu)\n",
-			   value ? "On" : "Off", value);
+		seq_printf(s, "Touchpad status: %s (%lu)\n", value ? "on" : "off", value);
 	if (!read_ec_data(priv->adev->handle, VPCCMD_R_CAMERA, &value))
-		seq_printf(s, "Camera status:\t%s(%lu)\n",
-			   value ? "On" : "Off", value);
+		seq_printf(s, "Camera status:   %s (%lu)\n", value ? "on" : "off", value);
+
 	seq_puts(s, "=====================\n");
 
-	if (!method_gbmd(priv->adev->handle, &value)) {
-		seq_printf(s, "Conservation mode:\t%s(%lu)\n",
-			   test_bit(BM_CONSERVATION_BIT, &value) ? "On" : "Off",
-			   value);
-	}
+	if (!eval_gbmd(priv->adev->handle, &value))
+		seq_printf(s, "GBMD: %#010lx\n", value);
+	if (!eval_hals(priv->adev->handle, &value))
+		seq_printf(s, "HALS: %#010lx\n", value);
 
 	return 0;
 }
@@ -280,39 +355,41 @@ static int debugfs_cfg_show(struct seq_file *s, void *data)
 {
 	struct ideapad_private *priv = s->private;
 
-	if (!priv) {
-		seq_printf(s, "cfg: N/A\n");
-	} else {
-		seq_printf(s, "cfg: 0x%.8lX\n\nCapability: ",
-			   priv->cfg);
-		if (test_bit(CFG_BT_BIT, &priv->cfg))
-			seq_printf(s, "Bluetooth ");
-		if (test_bit(CFG_3G_BIT, &priv->cfg))
-			seq_printf(s, "3G ");
-		if (test_bit(CFG_WIFI_BIT, &priv->cfg))
-			seq_printf(s, "Wireless ");
-		if (test_bit(CFG_CAMERA_BIT, &priv->cfg))
-			seq_printf(s, "Camera ");
-		seq_printf(s, "\nGraphic: ");
-		switch ((priv->cfg)&0x700) {
-		case 0x100:
-			seq_printf(s, "Intel");
-			break;
-		case 0x200:
-			seq_printf(s, "ATI");
-			break;
-		case 0x300:
-			seq_printf(s, "Nvidia");
-			break;
-		case 0x400:
-			seq_printf(s, "Intel and ATI");
-			break;
-		case 0x500:
-			seq_printf(s, "Intel and Nvidia");
-			break;
-		}
-		seq_printf(s, "\n");
+	seq_printf(s, "_CFG: %#010lx\n\n", priv->cfg);
+
+	seq_puts(s, "Capabilities:");
+	if (test_bit(CFG_CAP_BT_BIT, &priv->cfg))
+		seq_puts(s, " bluetooth");
+	if (test_bit(CFG_CAP_3G_BIT, &priv->cfg))
+		seq_puts(s, " 3G");
+	if (test_bit(CFG_CAP_WIFI_BIT, &priv->cfg))
+		seq_puts(s, " wifi");
+	if (test_bit(CFG_CAP_CAM_BIT, &priv->cfg))
+		seq_puts(s, " camera");
+	if (test_bit(CFG_CAP_TOUCHPAD_BIT, &priv->cfg))
+		seq_puts(s, " touchpad");
+	seq_puts(s, "\n");
+
+	seq_puts(s, "Graphics: ");
+	switch (priv->cfg & 0x700) {
+	case 0x100:
+		seq_puts(s, "Intel");
+		break;
+	case 0x200:
+		seq_puts(s, "ATI");
+		break;
+	case 0x300:
+		seq_puts(s, "Nvidia");
+		break;
+	case 0x400:
+		seq_puts(s, "Intel and ATI");
+		break;
+	case 0x500:
+		seq_puts(s, "Intel and Nvidia");
+		break;
 	}
+	seq_puts(s, "\n");
+
 	return 0;
 }
 DEFINE_SHOW_ATTRIBUTE(debugfs_cfg);
@@ -324,8 +401,8 @@ static void ideapad_debugfs_init(struct ideapad_private *priv)
 	dir = debugfs_create_dir("ideapad", NULL);
 	priv->debug = dir;
 
-	debugfs_create_file("cfg", S_IRUGO, dir, priv, &debugfs_cfg_fops);
-	debugfs_create_file("status", S_IRUGO, dir, priv, &debugfs_status_fops);
+	debugfs_create_file("cfg", 0444, dir, priv, &debugfs_cfg_fops);
+	debugfs_create_file("status", 0444, dir, priv, &debugfs_status_fops);
 }
 
 static void ideapad_debugfs_exit(struct ideapad_private *priv)
@@ -337,209 +414,256 @@ static void ideapad_debugfs_exit(struct ideapad_private *priv)
 /*
  * sysfs
  */
-static ssize_t show_ideapad_cam(struct device *dev,
-				struct device_attribute *attr,
-				char *buf)
+static ssize_t camera_power_show(struct device *dev,
+				 struct device_attribute *attr,
+				 char *buf)
 {
-	unsigned long result;
 	struct ideapad_private *priv = dev_get_drvdata(dev);
+	unsigned long result;
+	int err;
 
-	if (read_ec_data(priv->adev->handle, VPCCMD_R_CAMERA, &result))
-		return sprintf(buf, "-1\n");
-	return sprintf(buf, "%lu\n", result);
+	err = read_ec_data(priv->adev->handle, VPCCMD_R_CAMERA, &result);
+	if (err)
+		return err;
+
+	return sysfs_emit(buf, "%d\n", !!result);
 }
 
-static ssize_t store_ideapad_cam(struct device *dev,
-				 struct device_attribute *attr,
-				 const char *buf, size_t count)
+static ssize_t camera_power_store(struct device *dev,
+				  struct device_attribute *attr,
+				  const char *buf, size_t count)
 {
-	int ret, state;
 	struct ideapad_private *priv = dev_get_drvdata(dev);
+	bool state;
+	int err;
+
+	err = kstrtobool(buf, &state);
+	if (err)
+		return err;
+
+	err = write_ec_cmd(priv->adev->handle, VPCCMD_W_CAMERA, state);
+	if (err)
+		return err;
 
-	if (!count)
-		return 0;
-	if (sscanf(buf, "%i", &state) != 1)
-		return -EINVAL;
-	ret = write_ec_cmd(priv->adev->handle, VPCCMD_W_CAMERA, state);
-	if (ret < 0)
-		return -EIO;
 	return count;
 }
 
-static DEVICE_ATTR(camera_power, 0644, show_ideapad_cam, store_ideapad_cam);
+static DEVICE_ATTR_RW(camera_power);
 
-static ssize_t show_ideapad_fan(struct device *dev,
-				struct device_attribute *attr,
-				char *buf)
+static ssize_t conservation_mode_show(struct device *dev,
+				      struct device_attribute *attr,
+				      char *buf)
 {
-	unsigned long result;
 	struct ideapad_private *priv = dev_get_drvdata(dev);
+	unsigned long result;
+	int err;
+
+	err = eval_gbmd(priv->adev->handle, &result);
+	if (err)
+		return err;
 
-	if (read_ec_data(priv->adev->handle, VPCCMD_R_FAN, &result))
-		return sprintf(buf, "-1\n");
-	return sprintf(buf, "%lu\n", result);
+	return sysfs_emit(buf, "%d\n", !!test_bit(GBMD_CONSERVATION_STATE_BIT, &result));
 }
 
-static ssize_t store_ideapad_fan(struct device *dev,
-				 struct device_attribute *attr,
-				 const char *buf, size_t count)
+static ssize_t conservation_mode_store(struct device *dev,
+				       struct device_attribute *attr,
+				       const char *buf, size_t count)
 {
-	int ret, state;
 	struct ideapad_private *priv = dev_get_drvdata(dev);
+	bool state;
+	int err;
+
+	err = kstrtobool(buf, &state);
+	if (err)
+		return err;
+
+	err = exec_smbc(priv->adev->handle, state ? SMBC_CONSERVATION_ON : SMBC_CONSERVATION_OFF);
+	if (err)
+		return err;
 
-	if (!count)
-		return 0;
-	if (sscanf(buf, "%i", &state) != 1)
-		return -EINVAL;
-	if (state < 0 || state > 4 || state == 3)
-		return -EINVAL;
-	ret = write_ec_cmd(priv->adev->handle, VPCCMD_W_FAN, state);
-	if (ret < 0)
-		return -EIO;
 	return count;
 }
 
-static DEVICE_ATTR(fan_mode, 0644, show_ideapad_fan, store_ideapad_fan);
+static DEVICE_ATTR_RW(conservation_mode);
 
-static ssize_t touchpad_show(struct device *dev,
+static ssize_t fan_mode_show(struct device *dev,
 			     struct device_attribute *attr,
 			     char *buf)
 {
 	struct ideapad_private *priv = dev_get_drvdata(dev);
 	unsigned long result;
+	int err;
+
+	err = read_ec_data(priv->adev->handle, VPCCMD_R_FAN, &result);
+	if (err)
+		return err;
 
-	if (read_ec_data(priv->adev->handle, VPCCMD_R_TOUCHPAD, &result))
-		return sprintf(buf, "-1\n");
-	return sprintf(buf, "%lu\n", result);
+	return sysfs_emit(buf, "%lu\n", result);
 }
 
-/* Switch to RO for now: It might be revisited in the future */
-static ssize_t __maybe_unused touchpad_store(struct device *dev,
-					     struct device_attribute *attr,
-					     const char *buf, size_t count)
+static ssize_t fan_mode_store(struct device *dev,
+			      struct device_attribute *attr,
+			      const char *buf, size_t count)
 {
 	struct ideapad_private *priv = dev_get_drvdata(dev);
-	bool state;
-	int ret;
+	unsigned int state;
+	int err;
 
-	ret = kstrtobool(buf, &state);
-	if (ret)
-		return ret;
+	err = kstrtouint(buf, 0, &state);
+	if (err)
+		return err;
+
+	if (state > 4 || state == 3)
+		return -EINVAL;
+
+	err = write_ec_cmd(priv->adev->handle, VPCCMD_W_FAN, state);
+	if (err)
+		return err;
 
-	ret = write_ec_cmd(priv->adev->handle, VPCCMD_W_TOUCHPAD, state);
-	if (ret < 0)
-		return -EIO;
 	return count;
 }
 
-static DEVICE_ATTR_RO(touchpad);
+static DEVICE_ATTR_RW(fan_mode);
 
-static ssize_t conservation_mode_show(struct device *dev,
-				struct device_attribute *attr,
-				char *buf)
+static ssize_t fn_lock_show(struct device *dev,
+			    struct device_attribute *attr,
+			    char *buf)
 {
 	struct ideapad_private *priv = dev_get_drvdata(dev);
-	unsigned long result;
+	unsigned long hals;
+	int err;
 
-	if (method_gbmd(priv->adev->handle, &result))
-		return sprintf(buf, "-1\n");
-	return sprintf(buf, "%u\n", test_bit(BM_CONSERVATION_BIT, &result));
+	err = eval_hals(priv->adev->handle, &hals);
+	if (err)
+		return err;
+
+	return sysfs_emit(buf, "%d\n", !!test_bit(HALS_FNLOCK_STATE_BIT, &hals));
 }
 
-static ssize_t conservation_mode_store(struct device *dev,
-				 struct device_attribute *attr,
-				 const char *buf, size_t count)
+static ssize_t fn_lock_store(struct device *dev,
+			     struct device_attribute *attr,
+			     const char *buf, size_t count)
 {
 	struct ideapad_private *priv = dev_get_drvdata(dev);
 	bool state;
-	int ret;
+	int err;
 
-	ret = kstrtobool(buf, &state);
-	if (ret)
-		return ret;
+	err = kstrtobool(buf, &state);
+	if (err)
+		return err;
+
+	err = exec_sals(priv->adev->handle, state ? SALS_FNLOCK_ON : SALS_FNLOCK_OFF);
+	if (err)
+		return err;
 
-	ret = method_int1(priv->adev->handle, "SBMC", state ?
-					      BMCMD_CONSERVATION_ON :
-					      BMCMD_CONSERVATION_OFF);
-	if (ret < 0)
-		return -EIO;
 	return count;
 }
 
-static DEVICE_ATTR_RW(conservation_mode);
+static DEVICE_ATTR_RW(fn_lock);
 
-static ssize_t fn_lock_show(struct device *dev,
-			    struct device_attribute *attr,
-			    char *buf)
+static ssize_t touchpad_show(struct device *dev,
+			     struct device_attribute *attr,
+			     char *buf)
 {
 	struct ideapad_private *priv = dev_get_drvdata(dev);
 	unsigned long result;
-	int hals;
-	int fail = read_method_int(priv->adev->handle, "HALS", &hals);
+	int err;
 
-	if (fail)
-		return sprintf(buf, "-1\n");
+	err = read_ec_data(priv->adev->handle, VPCCMD_R_TOUCHPAD, &result);
+	if (err)
+		return err;
 
-	result = hals;
-	return sprintf(buf, "%u\n", test_bit(HA_FNLOCK_BIT, &result));
+	return sysfs_emit(buf, "%d\n", !!result);
 }
 
-static ssize_t fn_lock_store(struct device *dev,
-			     struct device_attribute *attr,
-			     const char *buf, size_t count)
+static ssize_t touchpad_store(struct device *dev,
+			      struct device_attribute *attr,
+			      const char *buf, size_t count)
 {
 	struct ideapad_private *priv = dev_get_drvdata(dev);
 	bool state;
-	int ret;
+	int err;
 
-	ret = kstrtobool(buf, &state);
-	if (ret)
-		return ret;
+	err = kstrtobool(buf, &state);
+	if (err)
+		return err;
+
+	err = write_ec_cmd(priv->adev->handle, VPCCMD_W_TOUCHPAD, state);
+	if (err)
+		return err;
 
-	ret = method_int1(priv->adev->handle, "SALS", state ?
-			  HACMD_FNLOCK_ON :
-			  HACMD_FNLOCK_OFF);
-	if (ret < 0)
-		return -EIO;
 	return count;
 }
 
-static DEVICE_ATTR_RW(fn_lock);
+static DEVICE_ATTR_RW(touchpad);
+
+static ssize_t usb_charging_show(struct device *dev,
+				 struct device_attribute *attr,
+				 char *buf)
+{
+	struct ideapad_private *priv = dev_get_drvdata(dev);
+	unsigned long hals;
+	int err;
+
+	err = eval_hals(priv->adev->handle, &hals);
+	if (err)
+		return err;
+
+	return sysfs_emit(buf, "%d\n", !!test_bit(HALS_USB_CHARGING_STATE_BIT, &hals));
+}
 
+static ssize_t usb_charging_store(struct device *dev,
+				  struct device_attribute *attr,
+				  const char *buf, size_t count)
+{
+	struct ideapad_private *priv = dev_get_drvdata(dev);
+	bool state;
+	int err;
+
+	err = kstrtobool(buf, &state);
+	if (err)
+		return err;
+
+	err = exec_sals(priv->adev->handle, state ? SALS_USB_CHARGING_ON : SALS_USB_CHARGING_OFF);
+	if (err)
+		return err;
+
+	return count;
+}
+
+static DEVICE_ATTR_RW(usb_charging);
 
 static struct attribute *ideapad_attributes[] = {
 	&dev_attr_camera_power.attr,
-	&dev_attr_fan_mode.attr,
-	&dev_attr_touchpad.attr,
 	&dev_attr_conservation_mode.attr,
+	&dev_attr_fan_mode.attr,
 	&dev_attr_fn_lock.attr,
+	&dev_attr_touchpad.attr,
+	&dev_attr_usb_charging.attr,
 	NULL
 };
 
 static umode_t ideapad_is_visible(struct kobject *kobj,
-				 struct attribute *attr,
-				 int idx)
+				  struct attribute *attr,
+				  int idx)
 {
-	struct device *dev = container_of(kobj, struct device, kobj);
+	struct device *dev = kobj_to_dev(kobj);
 	struct ideapad_private *priv = dev_get_drvdata(dev);
-	bool supported;
+	bool supported = true;
 
 	if (attr == &dev_attr_camera_power.attr)
-		supported = test_bit(CFG_CAMERA_BIT, &(priv->cfg));
-	else if (attr == &dev_attr_fan_mode.attr) {
-		unsigned long value;
-		supported = !read_ec_data(priv->adev->handle, VPCCMD_R_FAN,
-					  &value);
-	} else if (attr == &dev_attr_conservation_mode.attr) {
-		supported = acpi_has_method(priv->adev->handle, "GBMD") &&
-			    acpi_has_method(priv->adev->handle, "SBMC");
-	} else if (attr == &dev_attr_fn_lock.attr) {
-		supported = acpi_has_method(priv->adev->handle, "HALS") &&
-			acpi_has_method(priv->adev->handle, "SALS");
-	} else if (attr == &dev_attr_touchpad.attr)
-		supported = priv->has_touchpad_switch;
-	else
-		supported = true;
+		supported = test_bit(CFG_CAP_CAM_BIT, &priv->cfg);
+	else if (attr == &dev_attr_conservation_mode.attr)
+		supported = priv->features.conservation_mode;
+	else if (attr == &dev_attr_fan_mode.attr)
+		supported = priv->features.fan_mode;
+	else if (attr == &dev_attr_fn_lock.attr)
+		supported = priv->features.fn_lock;
+	else if (attr == &dev_attr_touchpad.attr)
+		supported = priv->features.touchpad_ctrl_via_ec &&
+			    test_bit(CFG_CAP_TOUCHPAD_BIT, &priv->cfg);
+	else if (attr == &dev_attr_usb_charging.attr)
+		supported = priv->features.usb_charging;
 
 	return supported ? attr->mode : 0;
 }
@@ -550,6 +674,265 @@ static const struct attribute_group ideapad_attribute_group = {
 };
 
 /*
+ * DYTC Platform profile
+ */
+#define DYTC_CMD_QUERY        0 /* To get DYTC status - enable/revision */
+#define DYTC_CMD_SET          1 /* To enable/disable IC function mode */
+#define DYTC_CMD_GET          2 /* To get current IC function and mode */
+#define DYTC_CMD_RESET    0x1ff /* To reset back to default */
+
+#define DYTC_QUERY_ENABLE_BIT 8  /* Bit        8 - 0 = disabled, 1 = enabled */
+#define DYTC_QUERY_SUBREV_BIT 16 /* Bits 16 - 27 - sub revision */
+#define DYTC_QUERY_REV_BIT    28 /* Bits 28 - 31 - revision */
+
+#define DYTC_GET_FUNCTION_BIT 8  /* Bits  8-11 - function setting */
+#define DYTC_GET_MODE_BIT     12 /* Bits 12-15 - mode setting */
+
+#define DYTC_SET_FUNCTION_BIT 12 /* Bits 12-15 - function setting */
+#define DYTC_SET_MODE_BIT     16 /* Bits 16-19 - mode setting */
+#define DYTC_SET_VALID_BIT    20 /* Bit     20 - 1 = on, 0 = off */
+
+#define DYTC_FUNCTION_STD     0  /* Function = 0, standard mode */
+#define DYTC_FUNCTION_CQL     1  /* Function = 1, lap mode */
+#define DYTC_FUNCTION_MMC     11 /* Function = 11, desk mode */
+
+#define DYTC_MODE_PERFORM     2  /* High power mode aka performance */
+#define DYTC_MODE_LOW_POWER       3  /* Low power mode aka quiet */
+#define DYTC_MODE_BALANCE   0xF  /* Default mode aka balanced */
+
+#define DYTC_SET_COMMAND(function, mode, on) \
+	(DYTC_CMD_SET | (function) << DYTC_SET_FUNCTION_BIT | \
+	 (mode) << DYTC_SET_MODE_BIT | \
+	 (on) << DYTC_SET_VALID_BIT)
+
+#define DYTC_DISABLE_CQL DYTC_SET_COMMAND(DYTC_FUNCTION_CQL, DYTC_MODE_BALANCE, 0)
+
+#define DYTC_ENABLE_CQL DYTC_SET_COMMAND(DYTC_FUNCTION_CQL, DYTC_MODE_BALANCE, 1)
+
+static int convert_dytc_to_profile(int dytcmode, enum platform_profile_option *profile)
+{
+	switch (dytcmode) {
+	case DYTC_MODE_LOW_POWER:
+		*profile = PLATFORM_PROFILE_LOW_POWER;
+		break;
+	case DYTC_MODE_BALANCE:
+		*profile =  PLATFORM_PROFILE_BALANCED;
+		break;
+	case DYTC_MODE_PERFORM:
+		*profile =  PLATFORM_PROFILE_PERFORMANCE;
+		break;
+	default: /* Unknown mode */
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int convert_profile_to_dytc(enum platform_profile_option profile, int *perfmode)
+{
+	switch (profile) {
+	case PLATFORM_PROFILE_LOW_POWER:
+		*perfmode = DYTC_MODE_LOW_POWER;
+		break;
+	case PLATFORM_PROFILE_BALANCED:
+		*perfmode = DYTC_MODE_BALANCE;
+		break;
+	case PLATFORM_PROFILE_PERFORMANCE:
+		*perfmode = DYTC_MODE_PERFORM;
+		break;
+	default: /* Unknown profile */
+		return -EOPNOTSUPP;
+	}
+
+	return 0;
+}
+
+/*
+ * dytc_profile_get: Function to register with platform_profile
+ * handler. Returns current platform profile.
+ */
+static int dytc_profile_get(struct platform_profile_handler *pprof,
+			    enum platform_profile_option *profile)
+{
+	struct ideapad_dytc_priv *dytc = container_of(pprof, struct ideapad_dytc_priv, pprof);
+
+	*profile = dytc->current_profile;
+	return 0;
+}
+
+/*
+ * Helper function - check if we are in CQL mode and if we are
+ *  - disable CQL,
+ *  - run the command
+ *  - enable CQL
+ *  If not in CQL mode, just run the command
+ */
+static int dytc_cql_command(struct ideapad_private *priv, unsigned long cmd,
+			    unsigned long *output)
+{
+	int err, cmd_err, cur_funcmode;
+
+	/* Determine if we are in CQL mode. This alters the commands we do */
+	err = eval_dytc(priv->adev->handle, DYTC_CMD_GET, output);
+	if (err)
+		return err;
+
+	cur_funcmode = (*output >> DYTC_GET_FUNCTION_BIT) & 0xF;
+	/* Check if we're OK to return immediately */
+	if (cmd == DYTC_CMD_GET && cur_funcmode != DYTC_FUNCTION_CQL)
+		return 0;
+
+	if (cur_funcmode == DYTC_FUNCTION_CQL) {
+		err = eval_dytc(priv->adev->handle, DYTC_DISABLE_CQL, NULL);
+		if (err)
+			return err;
+	}
+
+	cmd_err = eval_dytc(priv->adev->handle, cmd, output);
+	/* Check return condition after we've restored CQL state */
+
+	if (cur_funcmode == DYTC_FUNCTION_CQL) {
+		err = eval_dytc(priv->adev->handle, DYTC_ENABLE_CQL, NULL);
+		if (err)
+			return err;
+	}
+
+	return cmd_err;
+}
+
+/*
+ * dytc_profile_set: Function to register with platform_profile
+ * handler. Sets current platform profile.
+ */
+static int dytc_profile_set(struct platform_profile_handler *pprof,
+			    enum platform_profile_option profile)
+{
+	struct ideapad_dytc_priv *dytc = container_of(pprof, struct ideapad_dytc_priv, pprof);
+	struct ideapad_private *priv = dytc->priv;
+	int err;
+
+	err = mutex_lock_interruptible(&dytc->mutex);
+	if (err)
+		return err;
+
+	if (profile == PLATFORM_PROFILE_BALANCED) {
+		/* To get back to balanced mode we just issue a reset command */
+		err = eval_dytc(priv->adev->handle, DYTC_CMD_RESET, NULL);
+		if (err)
+			goto unlock;
+	} else {
+		int perfmode;
+
+		err = convert_profile_to_dytc(profile, &perfmode);
+		if (err)
+			goto unlock;
+
+		/* Determine if we are in CQL mode. This alters the commands we do */
+		err = dytc_cql_command(priv, DYTC_SET_COMMAND(DYTC_FUNCTION_MMC, perfmode, 1),
+				       NULL);
+		if (err)
+			goto unlock;
+	}
+
+	/* Success - update current profile */
+	dytc->current_profile = profile;
+
+unlock:
+	mutex_unlock(&dytc->mutex);
+
+	return err;
+}
+
+static void dytc_profile_refresh(struct ideapad_private *priv)
+{
+	enum platform_profile_option profile;
+	unsigned long output;
+	int err, perfmode;
+
+	mutex_lock(&priv->dytc->mutex);
+	err = dytc_cql_command(priv, DYTC_CMD_GET, &output);
+	mutex_unlock(&priv->dytc->mutex);
+	if (err)
+		return;
+
+	perfmode = (output >> DYTC_GET_MODE_BIT) & 0xF;
+
+	if (convert_dytc_to_profile(perfmode, &profile))
+		return;
+
+	if (profile != priv->dytc->current_profile) {
+		priv->dytc->current_profile = profile;
+		platform_profile_notify();
+	}
+}
+
+static int ideapad_dytc_profile_init(struct ideapad_private *priv)
+{
+	int err, dytc_version;
+	unsigned long output;
+
+	if (!priv->features.dytc)
+		return -ENODEV;
+
+	err = eval_dytc(priv->adev->handle, DYTC_CMD_QUERY, &output);
+	/* For all other errors we can flag the failure */
+	if (err)
+		return err;
+
+	/* Check DYTC is enabled and supports mode setting */
+	if (!test_bit(DYTC_QUERY_ENABLE_BIT, &output))
+		return -ENODEV;
+
+	dytc_version = (output >> DYTC_QUERY_REV_BIT) & 0xF;
+	if (dytc_version < 5)
+		return -ENODEV;
+
+	priv->dytc = kzalloc(sizeof(*priv->dytc), GFP_KERNEL);
+	if (!priv->dytc)
+		return -ENOMEM;
+
+	mutex_init(&priv->dytc->mutex);
+
+	priv->dytc->priv = priv;
+	priv->dytc->pprof.profile_get = dytc_profile_get;
+	priv->dytc->pprof.profile_set = dytc_profile_set;
+
+	/* Setup supported modes */
+	set_bit(PLATFORM_PROFILE_LOW_POWER, priv->dytc->pprof.choices);
+	set_bit(PLATFORM_PROFILE_BALANCED, priv->dytc->pprof.choices);
+	set_bit(PLATFORM_PROFILE_PERFORMANCE, priv->dytc->pprof.choices);
+
+	/* Create platform_profile structure and register */
+	err = platform_profile_register(&priv->dytc->pprof);
+	if (err)
+		goto pp_reg_failed;
+
+	/* Ensure initial values are correct */
+	dytc_profile_refresh(priv);
+
+	return 0;
+
+pp_reg_failed:
+	mutex_destroy(&priv->dytc->mutex);
+	kfree(priv->dytc);
+	priv->dytc = NULL;
+
+	return err;
+}
+
+static void ideapad_dytc_profile_exit(struct ideapad_private *priv)
+{
+	if (!priv->dytc)
+		return;
+
+	platform_profile_remove();
+	mutex_destroy(&priv->dytc->mutex);
+	kfree(priv->dytc);
+
+	priv->dytc = NULL;
+}
+
+/*
  * Rfkill
  */
 struct ideapad_rfk_data {
@@ -560,9 +943,9 @@ struct ideapad_rfk_data {
 };
 
 static const struct ideapad_rfk_data ideapad_rfk_data[] = {
-	{ "ideapad_wlan",    CFG_WIFI_BIT, VPCCMD_W_WIFI, RFKILL_TYPE_WLAN },
-	{ "ideapad_bluetooth", CFG_BT_BIT, VPCCMD_W_BT, RFKILL_TYPE_BLUETOOTH },
-	{ "ideapad_3g",        CFG_3G_BIT, VPCCMD_W_3G, RFKILL_TYPE_WWAN },
+	{ "ideapad_wlan",      CFG_CAP_WIFI_BIT, VPCCMD_W_WIFI, RFKILL_TYPE_WLAN },
+	{ "ideapad_bluetooth", CFG_CAP_BT_BIT,   VPCCMD_W_BT,   RFKILL_TYPE_BLUETOOTH },
+	{ "ideapad_3g",        CFG_CAP_3G_BIT,   VPCCMD_W_3G,   RFKILL_TYPE_WWAN },
 };
 
 static int ideapad_rfk_set(void *data, bool blocked)
@@ -582,7 +965,7 @@ static void ideapad_sync_rfk_state(struct ideapad_private *priv)
 	unsigned long hw_blocked = 0;
 	int i;
 
-	if (priv->has_hw_rfkill_switch) {
+	if (priv->features.hw_rfkill_switch) {
 		if (read_ec_data(priv->adev->handle, VPCCMD_R_RF, &hw_blocked))
 			return;
 		hw_blocked = !hw_blocked;
@@ -595,16 +978,15 @@ static void ideapad_sync_rfk_state(struct ideapad_private *priv)
 
 static int ideapad_register_rfkill(struct ideapad_private *priv, int dev)
 {
-	int ret;
-	unsigned long sw_blocked;
+	unsigned long rf_enabled;
+	int err;
 
-	if (no_bt_rfkill &&
-	    (ideapad_rfk_data[dev].type == RFKILL_TYPE_BLUETOOTH)) {
+	if (no_bt_rfkill && ideapad_rfk_data[dev].type == RFKILL_TYPE_BLUETOOTH) {
 		/* Force to enable bluetooth when no_bt_rfkill=1 */
-		write_ec_cmd(priv->adev->handle,
-			     ideapad_rfk_data[dev].opcode, 1);
+		write_ec_cmd(priv->adev->handle, ideapad_rfk_data[dev].opcode, 1);
 		return 0;
 	}
+
 	priv->rfk_priv[dev].dev = dev;
 	priv->rfk_priv[dev].priv = priv;
 
@@ -616,20 +998,17 @@ static int ideapad_register_rfkill(struct ideapad_private *priv, int dev)
 	if (!priv->rfk[dev])
 		return -ENOMEM;
 
-	if (read_ec_data(priv->adev->handle, ideapad_rfk_data[dev].opcode-1,
-			 &sw_blocked)) {
-		rfkill_init_sw_state(priv->rfk[dev], 0);
-	} else {
-		sw_blocked = !sw_blocked;
-		rfkill_init_sw_state(priv->rfk[dev], sw_blocked);
-	}
+	err = read_ec_data(priv->adev->handle, ideapad_rfk_data[dev].opcode - 1, &rf_enabled);
+	if (err)
+		rf_enabled = 1;
+
+	rfkill_init_sw_state(priv->rfk[dev], !rf_enabled);
 
-	ret = rfkill_register(priv->rfk[dev]);
-	if (ret) {
+	err = rfkill_register(priv->rfk[dev]);
+	if (err)
 		rfkill_destroy(priv->rfk[dev]);
-		return ret;
-	}
-	return 0;
+
+	return err;
 }
 
 static void ideapad_unregister_rfkill(struct ideapad_private *priv, int dev)
@@ -646,40 +1025,39 @@ static void ideapad_unregister_rfkill(struct ideapad_private *priv, int dev)
  */
 static int ideapad_sysfs_init(struct ideapad_private *priv)
 {
-	return sysfs_create_group(&priv->platform_device->dev.kobj,
-				    &ideapad_attribute_group);
+	return device_add_group(&priv->platform_device->dev,
+				&ideapad_attribute_group);
 }
 
 static void ideapad_sysfs_exit(struct ideapad_private *priv)
 {
-	sysfs_remove_group(&priv->platform_device->dev.kobj,
-			   &ideapad_attribute_group);
+	device_remove_group(&priv->platform_device->dev,
+			    &ideapad_attribute_group);
 }
 
 /*
  * input device
  */
 static const struct key_entry ideapad_keymap[] = {
-	{ KE_KEY, 6,  { KEY_SWITCHVIDEOMODE } },
-	{ KE_KEY, 7,  { KEY_CAMERA } },
-	{ KE_KEY, 8,  { KEY_MICMUTE } },
-	{ KE_KEY, 11, { KEY_F16 } },
-	{ KE_KEY, 13, { KEY_WLAN } },
-	{ KE_KEY, 16, { KEY_PROG1 } },
-	{ KE_KEY, 17, { KEY_PROG2 } },
-	{ KE_KEY, 64, { KEY_PROG3 } },
-	{ KE_KEY, 65, { KEY_PROG4 } },
-	{ KE_KEY, 66, { KEY_TOUCHPAD_OFF } },
-	{ KE_KEY, 67, { KEY_TOUCHPAD_ON } },
+	{ KE_KEY,   6, { KEY_SWITCHVIDEOMODE } },
+	{ KE_KEY,   7, { KEY_CAMERA } },
+	{ KE_KEY,   8, { KEY_MICMUTE } },
+	{ KE_KEY,  11, { KEY_F16 } },
+	{ KE_KEY,  13, { KEY_WLAN } },
+	{ KE_KEY,  16, { KEY_PROG1 } },
+	{ KE_KEY,  17, { KEY_PROG2 } },
+	{ KE_KEY,  64, { KEY_PROG3 } },
+	{ KE_KEY,  65, { KEY_PROG4 } },
+	{ KE_KEY,  66, { KEY_TOUCHPAD_OFF } },
+	{ KE_KEY,  67, { KEY_TOUCHPAD_ON } },
 	{ KE_KEY, 128, { KEY_ESC } },
-
-	{ KE_END, 0 },
+	{ KE_END },
 };
 
 static int ideapad_input_init(struct ideapad_private *priv)
 {
 	struct input_dev *inputdev;
-	int error;
+	int err;
 
 	inputdev = input_allocate_device();
 	if (!inputdev)
@@ -690,24 +1068,28 @@ static int ideapad_input_init(struct ideapad_private *priv)
 	inputdev->id.bustype = BUS_HOST;
 	inputdev->dev.parent = &priv->platform_device->dev;
 
-	error = sparse_keymap_setup(inputdev, ideapad_keymap, NULL);
-	if (error) {
-		pr_err("Unable to setup input device keymap\n");
+	err = sparse_keymap_setup(inputdev, ideapad_keymap, NULL);
+	if (err) {
+		dev_err(&priv->platform_device->dev,
+			"Could not set up input device keymap: %d\n", err);
 		goto err_free_dev;
 	}
 
-	error = input_register_device(inputdev);
-	if (error) {
-		pr_err("Unable to register input device\n");
+	err = input_register_device(inputdev);
+	if (err) {
+		dev_err(&priv->platform_device->dev,
+			"Could not register input device: %d\n", err);
 		goto err_free_dev;
 	}
 
 	priv->inputdev = inputdev;
+
 	return 0;
 
 err_free_dev:
 	input_free_device(inputdev);
-	return error;
+
+	return err;
 }
 
 static void ideapad_input_exit(struct ideapad_private *priv)
@@ -728,6 +1110,7 @@ static void ideapad_input_novokey(struct ideapad_private *priv)
 
 	if (read_ec_data(priv->adev->handle, VPCCMD_R_NOVO, &long_pressed))
 		return;
+
 	if (long_pressed)
 		ideapad_input_report(priv, 17);
 	else
@@ -738,24 +1121,24 @@ static void ideapad_check_special_buttons(struct ideapad_private *priv)
 {
 	unsigned long bit, value;
 
-	read_ec_data(priv->adev->handle, VPCCMD_R_SPECIAL_BUTTONS, &value);
-
-	for (bit = 0; bit < 16; bit++) {
-		if (test_bit(bit, &value)) {
-			switch (bit) {
-			case 0:	/* Z580 */
-			case 6:	/* Z570 */
-				/* Thermal Management button */
-				ideapad_input_report(priv, 65);
-				break;
-			case 1:
-				/* OneKey Theater button */
-				ideapad_input_report(priv, 64);
-				break;
-			default:
-				pr_info("Unknown special button: %lu\n", bit);
-				break;
-			}
+	if (read_ec_data(priv->adev->handle, VPCCMD_R_SPECIAL_BUTTONS, &value))
+		return;
+
+	for_each_set_bit (bit, &value, 16) {
+		switch (bit) {
+		case 6:	/* Z570 */
+		case 0:	/* Z580 */
+			/* Thermal Management button */
+			ideapad_input_report(priv, 65);
+			break;
+		case 1:
+			/* OneKey Theater button */
+			ideapad_input_report(priv, 64);
+			break;
+		default:
+			dev_info(&priv->platform_device->dev,
+				 "Unknown special button: %lu\n", bit);
+			break;
 		}
 	}
 }
@@ -767,28 +1150,29 @@ static int ideapad_backlight_get_brightness(struct backlight_device *blightdev)
 {
 	struct ideapad_private *priv = bl_get_data(blightdev);
 	unsigned long now;
+	int err;
 
-	if (!priv)
-		return -EINVAL;
+	err = read_ec_data(priv->adev->handle, VPCCMD_R_BL, &now);
+	if (err)
+		return err;
 
-	if (read_ec_data(priv->adev->handle, VPCCMD_R_BL, &now))
-		return -EIO;
 	return now;
 }
 
 static int ideapad_backlight_update_status(struct backlight_device *blightdev)
 {
 	struct ideapad_private *priv = bl_get_data(blightdev);
+	int err;
 
-	if (!priv)
-		return -EINVAL;
+	err = write_ec_cmd(priv->adev->handle, VPCCMD_W_BL,
+			   blightdev->props.brightness);
+	if (err)
+		return err;
 
-	if (write_ec_cmd(priv->adev->handle, VPCCMD_W_BL,
-			 blightdev->props.brightness))
-		return -EIO;
-	if (write_ec_cmd(priv->adev->handle, VPCCMD_W_BL_POWER,
-			 blightdev->props.power == FB_BLANK_POWERDOWN ? 0 : 1))
-		return -EIO;
+	err = write_ec_cmd(priv->adev->handle, VPCCMD_W_BL_POWER,
+			   blightdev->props.power != FB_BLANK_POWERDOWN);
+	if (err)
+		return err;
 
 	return 0;
 }
@@ -803,30 +1187,41 @@ static int ideapad_backlight_init(struct ideapad_private *priv)
 	struct backlight_device *blightdev;
 	struct backlight_properties props;
 	unsigned long max, now, power;
+	int err;
 
-	if (read_ec_data(priv->adev->handle, VPCCMD_R_BL_MAX, &max))
-		return -EIO;
-	if (read_ec_data(priv->adev->handle, VPCCMD_R_BL, &now))
-		return -EIO;
-	if (read_ec_data(priv->adev->handle, VPCCMD_R_BL_POWER, &power))
-		return -EIO;
+	err = read_ec_data(priv->adev->handle, VPCCMD_R_BL_MAX, &max);
+	if (err)
+		return err;
+
+	err = read_ec_data(priv->adev->handle, VPCCMD_R_BL, &now);
+	if (err)
+		return err;
+
+	err = read_ec_data(priv->adev->handle, VPCCMD_R_BL_POWER, &power);
+	if (err)
+		return err;
+
+	memset(&props, 0, sizeof(props));
 
-	memset(&props, 0, sizeof(struct backlight_properties));
 	props.max_brightness = max;
 	props.type = BACKLIGHT_PLATFORM;
+
 	blightdev = backlight_device_register("ideapad",
 					      &priv->platform_device->dev,
 					      priv,
 					      &ideapad_backlight_ops,
 					      &props);
 	if (IS_ERR(blightdev)) {
-		pr_err("Could not register backlight device\n");
-		return PTR_ERR(blightdev);
+		err = PTR_ERR(blightdev);
+		dev_err(&priv->platform_device->dev,
+			"Could not register backlight device: %d\n", err);
+		return err;
 	}
 
 	priv->blightdev = blightdev;
 	blightdev->props.brightness = now;
 	blightdev->props.power = power ? FB_BLANK_UNBLANK : FB_BLANK_POWERDOWN;
+
 	backlight_update_status(blightdev);
 
 	return 0;
@@ -840,13 +1235,15 @@ static void ideapad_backlight_exit(struct ideapad_private *priv)
 
 static void ideapad_backlight_notify_power(struct ideapad_private *priv)
 {
-	unsigned long power;
 	struct backlight_device *blightdev = priv->blightdev;
+	unsigned long power;
 
 	if (!blightdev)
 		return;
+
 	if (read_ec_data(priv->adev->handle, VPCCMD_R_BL_POWER, &power))
 		return;
+
 	blightdev->props.power = power ? FB_BLANK_UNBLANK : FB_BLANK_POWERDOWN;
 }
 
@@ -855,12 +1252,112 @@ static void ideapad_backlight_notify_brightness(struct ideapad_private *priv)
 	unsigned long now;
 
 	/* if we control brightness via acpi video driver */
-	if (priv->blightdev == NULL) {
+	if (!priv->blightdev)
 		read_ec_data(priv->adev->handle, VPCCMD_R_BL, &now);
+	else
+		backlight_force_update(priv->blightdev, BACKLIGHT_UPDATE_HOTKEY);
+}
+
+/*
+ * keyboard backlight
+ */
+static int ideapad_kbd_bl_brightness_get(struct ideapad_private *priv)
+{
+	unsigned long hals;
+	int err;
+
+	err = eval_hals(priv->adev->handle, &hals);
+	if (err)
+		return err;
+
+	return !!test_bit(HALS_KBD_BL_STATE_BIT, &hals);
+}
+
+static enum led_brightness ideapad_kbd_bl_led_cdev_brightness_get(struct led_classdev *led_cdev)
+{
+	struct ideapad_private *priv = container_of(led_cdev, struct ideapad_private, kbd_bl.led);
+
+	return ideapad_kbd_bl_brightness_get(priv);
+}
+
+static int ideapad_kbd_bl_brightness_set(struct ideapad_private *priv, unsigned int brightness)
+{
+	int err = exec_sals(priv->adev->handle, brightness ? SALS_KBD_BL_ON : SALS_KBD_BL_OFF);
+
+	if (err)
+		return err;
+
+	priv->kbd_bl.last_brightness = brightness;
+
+	return 0;
+}
+
+static int ideapad_kbd_bl_led_cdev_brightness_set(struct led_classdev *led_cdev,
+						  enum led_brightness brightness)
+{
+	struct ideapad_private *priv = container_of(led_cdev, struct ideapad_private, kbd_bl.led);
+
+	return ideapad_kbd_bl_brightness_set(priv, brightness);
+}
+
+static void ideapad_kbd_bl_notify(struct ideapad_private *priv)
+{
+	int brightness;
+
+	if (!priv->kbd_bl.initialized)
 		return;
-	}
 
-	backlight_force_update(priv->blightdev, BACKLIGHT_UPDATE_HOTKEY);
+	brightness = ideapad_kbd_bl_brightness_get(priv);
+	if (brightness < 0)
+		return;
+
+	if (brightness == priv->kbd_bl.last_brightness)
+		return;
+
+	priv->kbd_bl.last_brightness = brightness;
+
+	led_classdev_notify_brightness_hw_changed(&priv->kbd_bl.led, brightness);
+}
+
+static int ideapad_kbd_bl_init(struct ideapad_private *priv)
+{
+	int brightness, err;
+
+	if (!priv->features.kbd_bl)
+		return -ENODEV;
+
+	if (WARN_ON(priv->kbd_bl.initialized))
+		return -EEXIST;
+
+	brightness = ideapad_kbd_bl_brightness_get(priv);
+	if (brightness < 0)
+		return brightness;
+
+	priv->kbd_bl.last_brightness = brightness;
+
+	priv->kbd_bl.led.name                    = "platform::" LED_FUNCTION_KBD_BACKLIGHT;
+	priv->kbd_bl.led.max_brightness          = 1;
+	priv->kbd_bl.led.brightness_get          = ideapad_kbd_bl_led_cdev_brightness_get;
+	priv->kbd_bl.led.brightness_set_blocking = ideapad_kbd_bl_led_cdev_brightness_set;
+	priv->kbd_bl.led.flags                   = LED_BRIGHT_HW_CHANGED;
+
+	err = led_classdev_register(&priv->platform_device->dev, &priv->kbd_bl.led);
+	if (err)
+		return err;
+
+	priv->kbd_bl.initialized = true;
+
+	return 0;
+}
+
+static void ideapad_kbd_bl_exit(struct ideapad_private *priv)
+{
+	if (!priv->kbd_bl.initialized)
+		return;
+
+	priv->kbd_bl.initialized = false;
+
+	led_classdev_unregister(&priv->kbd_bl.led);
 }
 
 /*
@@ -870,71 +1367,77 @@ static void ideapad_sync_touchpad_state(struct ideapad_private *priv)
 {
 	unsigned long value;
 
-	if (!priv->has_touchpad_switch)
+	if (!priv->features.touchpad_ctrl_via_ec)
 		return;
 
 	/* Without reading from EC touchpad LED doesn't switch state */
 	if (!read_ec_data(priv->adev->handle, VPCCMD_R_TOUCHPAD, &value)) {
-		/* Some IdeaPads don't really turn off touchpad - they only
+		unsigned char param;
+		/*
+		 * Some IdeaPads don't really turn off touchpad - they only
 		 * switch the LED state. We (de)activate KBC AUX port to turn
 		 * touchpad off and on. We send KEY_TOUCHPAD_OFF and
-		 * KEY_TOUCHPAD_ON to not to get out of sync with LED */
-		unsigned char param;
-		i8042_command(&param, value ? I8042_CMD_AUX_ENABLE :
-			      I8042_CMD_AUX_DISABLE);
+		 * KEY_TOUCHPAD_ON to not to get out of sync with LED
+		 */
+		i8042_command(&param, value ? I8042_CMD_AUX_ENABLE : I8042_CMD_AUX_DISABLE);
 		ideapad_input_report(priv, value ? 67 : 66);
+		sysfs_notify(&priv->platform_device->dev.kobj, NULL, "touchpad");
 	}
 }
 
 static void ideapad_acpi_notify(acpi_handle handle, u32 event, void *data)
 {
 	struct ideapad_private *priv = data;
-	unsigned long vpc1, vpc2, vpc_bit;
+	unsigned long vpc1, vpc2, bit;
 
 	if (read_ec_data(handle, VPCCMD_R_VPC1, &vpc1))
 		return;
+
 	if (read_ec_data(handle, VPCCMD_R_VPC2, &vpc2))
 		return;
 
 	vpc1 = (vpc2 << 8) | vpc1;
-	for (vpc_bit = 0; vpc_bit < 16; vpc_bit++) {
-		if (test_bit(vpc_bit, &vpc1)) {
-			switch (vpc_bit) {
-			case 9:
-				ideapad_sync_rfk_state(priv);
-				break;
-			case 13:
-			case 11:
-			case 8:
-			case 7:
-			case 6:
-				ideapad_input_report(priv, vpc_bit);
-				break;
-			case 5:
-				ideapad_sync_touchpad_state(priv);
-				break;
-			case 4:
-				ideapad_backlight_notify_brightness(priv);
-				break;
-			case 3:
-				ideapad_input_novokey(priv);
-				break;
-			case 2:
-				ideapad_backlight_notify_power(priv);
-				break;
-			case 0:
-				ideapad_check_special_buttons(priv);
-				break;
-			case 1:
-				/* Some IdeaPads report event 1 every ~20
-				 * seconds while on battery power; some
-				 * report this when changing to/from tablet
-				 * mode. Squelch this event.
-				 */
-				break;
-			default:
-				pr_info("Unknown event: %lu\n", vpc_bit);
-			}
+
+	for_each_set_bit (bit, &vpc1, 16) {
+		switch (bit) {
+		case 13:
+		case 11:
+		case 8:
+		case 7:
+		case 6:
+			ideapad_input_report(priv, bit);
+			break;
+		case 9:
+			ideapad_sync_rfk_state(priv);
+			break;
+		case 5:
+			ideapad_sync_touchpad_state(priv);
+			break;
+		case 4:
+			ideapad_backlight_notify_brightness(priv);
+			break;
+		case 3:
+			ideapad_input_novokey(priv);
+			break;
+		case 2:
+			ideapad_backlight_notify_power(priv);
+			break;
+		case 1:
+			/*
+			 * Some IdeaPads report event 1 every ~20
+			 * seconds while on battery power; some
+			 * report this when changing to/from tablet
+			 * mode; some report this when the keyboard
+			 * backlight has changed.
+			 */
+			ideapad_kbd_bl_notify(priv);
+			break;
+		case 0:
+			ideapad_check_special_buttons(priv);
+			break;
+		default:
+			dev_info(&priv->platform_device->dev,
+				 "Unknown event: %lu\n", bit);
 		}
 	}
 }
@@ -942,12 +1445,15 @@ static void ideapad_acpi_notify(acpi_handle handle, u32 event, void *data)
 #if IS_ENABLED(CONFIG_ACPI_WMI)
 static void ideapad_wmi_notify(u32 value, void *context)
 {
+	struct ideapad_private *priv = context;
+
 	switch (value) {
 	case 128:
-		ideapad_input_report(context, value);
+		ideapad_input_report(priv, value);
 		break;
 	default:
-		pr_info("Unknown WMI event %u\n", value);
+		dev_info(&priv->platform_device->dev,
+			 "Unknown WMI event: %u\n", value);
 	}
 }
 #endif
@@ -971,18 +1477,52 @@ static const struct dmi_system_id hw_rfkill_list[] = {
 	{}
 };
 
+static void ideapad_check_features(struct ideapad_private *priv)
+{
+	acpi_handle handle = priv->adev->handle;
+	unsigned long val;
+
+	priv->features.hw_rfkill_switch = dmi_check_system(hw_rfkill_list);
+
+	/* Most ideapads with ELAN0634 touchpad don't use EC touchpad switch */
+	priv->features.touchpad_ctrl_via_ec = !acpi_dev_present("ELAN0634", NULL, -1);
+
+	if (!read_ec_data(handle, VPCCMD_R_FAN, &val))
+		priv->features.fan_mode = true;
+
+	if (acpi_has_method(handle, "GBMD") && acpi_has_method(handle, "SBMC"))
+		priv->features.conservation_mode = true;
+
+	if (acpi_has_method(handle, "DYTC"))
+		priv->features.dytc = true;
+
+	if (acpi_has_method(handle, "HALS") && acpi_has_method(handle, "SALS")) {
+		if (!eval_hals(handle, &val)) {
+			if (test_bit(HALS_FNLOCK_SUPPORT_BIT, &val))
+				priv->features.fn_lock = true;
+
+			if (test_bit(HALS_KBD_BL_SUPPORT_BIT, &val))
+				priv->features.kbd_bl = true;
+
+			if (test_bit(HALS_USB_CHARGING_SUPPORT_BIT, &val))
+				priv->features.usb_charging = true;
+		}
+	}
+}
+
 static int ideapad_acpi_add(struct platform_device *pdev)
 {
-	int ret, i;
-	int cfg;
 	struct ideapad_private *priv;
 	struct acpi_device *adev;
+	acpi_status status;
+	unsigned long cfg;
+	int err, i;
 
-	ret = acpi_bus_get_device(ACPI_HANDLE(&pdev->dev), &adev);
-	if (ret)
+	err = acpi_bus_get_device(ACPI_HANDLE(&pdev->dev), &adev);
+	if (err)
 		return -ENODEV;
 
-	if (read_method_int(adev->handle, "_CFG", &cfg))
+	if (eval_int(adev->handle, "_CFG", &cfg))
 		return -ENODEV;
 
 	priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
@@ -990,33 +1530,40 @@ static int ideapad_acpi_add(struct platform_device *pdev)
 		return -ENOMEM;
 
 	dev_set_drvdata(&pdev->dev, priv);
+
 	priv->cfg = cfg;
 	priv->adev = adev;
 	priv->platform_device = pdev;
-	priv->has_hw_rfkill_switch = dmi_check_system(hw_rfkill_list);
 
-	/* Most ideapads with ELAN0634 touchpad don't use EC touchpad switch */
-	priv->has_touchpad_switch = !acpi_dev_present("ELAN0634", NULL, -1);
+	ideapad_check_features(priv);
 
-	ret = ideapad_sysfs_init(priv);
-	if (ret)
-		return ret;
+	err = ideapad_sysfs_init(priv);
+	if (err)
+		return err;
 
 	ideapad_debugfs_init(priv);
 
-	ret = ideapad_input_init(priv);
-	if (ret)
+	err = ideapad_input_init(priv);
+	if (err)
 		goto input_failed;
 
+	err = ideapad_kbd_bl_init(priv);
+	if (err) {
+		if (err != -ENODEV)
+			dev_warn(&pdev->dev, "Could not set up keyboard backlight LED: %d\n", err);
+		else
+			dev_info(&pdev->dev, "Keyboard backlight control not available\n");
+	}
+
 	/*
 	 * On some models without a hw-switch (the yoga 2 13 at least)
 	 * VPCCMD_W_RF must be explicitly set to 1 for the wifi to work.
 	 */
-	if (!priv->has_hw_rfkill_switch)
+	if (!priv->features.hw_rfkill_switch)
 		write_ec_cmd(priv->adev->handle, VPCCMD_W_RF, 1);
 
 	/* The same for Touchpad */
-	if (!priv->has_touchpad_switch)
+	if (!priv->features.touchpad_ctrl_via_ec)
 		write_ec_cmd(priv->adev->handle, VPCCMD_W_TOUCHPAD, 1);
 
 	for (i = 0; i < IDEAPAD_RFKILL_DEV_NUM; i++)
@@ -1026,45 +1573,70 @@ static int ideapad_acpi_add(struct platform_device *pdev)
 	ideapad_sync_rfk_state(priv);
 	ideapad_sync_touchpad_state(priv);
 
+	err = ideapad_dytc_profile_init(priv);
+	if (err) {
+		if (err != -ENODEV)
+			dev_warn(&pdev->dev, "Could not set up DYTC interface: %d\n", err);
+		else
+			dev_info(&pdev->dev, "DYTC interface is not available\n");
+	}
+
 	if (acpi_video_get_backlight_type() == acpi_backlight_vendor) {
-		ret = ideapad_backlight_init(priv);
-		if (ret && ret != -ENODEV)
+		err = ideapad_backlight_init(priv);
+		if (err && err != -ENODEV)
 			goto backlight_failed;
 	}
-	ret = acpi_install_notify_handler(adev->handle,
-		ACPI_DEVICE_NOTIFY, ideapad_acpi_notify, priv);
-	if (ret)
+
+	status = acpi_install_notify_handler(adev->handle,
+					     ACPI_DEVICE_NOTIFY,
+					     ideapad_acpi_notify, priv);
+	if (ACPI_FAILURE(status)) {
+		err = -EIO;
 		goto notification_failed;
+	}
 
 #if IS_ENABLED(CONFIG_ACPI_WMI)
 	for (i = 0; i < ARRAY_SIZE(ideapad_wmi_fnesc_events); i++) {
-		ret = wmi_install_notify_handler(ideapad_wmi_fnesc_events[i],
-						 ideapad_wmi_notify, priv);
-		if (ret == AE_OK) {
+		status = wmi_install_notify_handler(ideapad_wmi_fnesc_events[i],
+						    ideapad_wmi_notify, priv);
+		if (ACPI_SUCCESS(status)) {
 			priv->fnesc_guid = ideapad_wmi_fnesc_events[i];
 			break;
 		}
 	}
-	if (ret != AE_OK && ret != AE_NOT_EXIST)
+
+	if (ACPI_FAILURE(status) && status != AE_NOT_EXIST) {
+		err = -EIO;
 		goto notification_failed_wmi;
+	}
 #endif
 
 	return 0;
+
 #if IS_ENABLED(CONFIG_ACPI_WMI)
 notification_failed_wmi:
 	acpi_remove_notify_handler(priv->adev->handle,
-		ACPI_DEVICE_NOTIFY, ideapad_acpi_notify);
+				   ACPI_DEVICE_NOTIFY,
+				   ideapad_acpi_notify);
 #endif
+
 notification_failed:
 	ideapad_backlight_exit(priv);
+
 backlight_failed:
+	ideapad_dytc_profile_exit(priv);
+
 	for (i = 0; i < IDEAPAD_RFKILL_DEV_NUM; i++)
 		ideapad_unregister_rfkill(priv, i);
+
+	ideapad_kbd_bl_exit(priv);
 	ideapad_input_exit(priv);
+
 input_failed:
 	ideapad_debugfs_exit(priv);
 	ideapad_sysfs_exit(priv);
-	return ret;
+
+	return err;
 }
 
 static int ideapad_acpi_remove(struct platform_device *pdev)
@@ -1076,38 +1648,44 @@ static int ideapad_acpi_remove(struct platform_device *pdev)
 	if (priv->fnesc_guid)
 		wmi_remove_notify_handler(priv->fnesc_guid);
 #endif
+
 	acpi_remove_notify_handler(priv->adev->handle,
-		ACPI_DEVICE_NOTIFY, ideapad_acpi_notify);
+				   ACPI_DEVICE_NOTIFY,
+				   ideapad_acpi_notify);
+
 	ideapad_backlight_exit(priv);
+	ideapad_dytc_profile_exit(priv);
+
 	for (i = 0; i < IDEAPAD_RFKILL_DEV_NUM; i++)
 		ideapad_unregister_rfkill(priv, i);
+
+	ideapad_kbd_bl_exit(priv);
 	ideapad_input_exit(priv);
 	ideapad_debugfs_exit(priv);
 	ideapad_sysfs_exit(priv);
-	dev_set_drvdata(&pdev->dev, NULL);
 
 	return 0;
 }
 
 #ifdef CONFIG_PM_SLEEP
-static int ideapad_acpi_resume(struct device *device)
+static int ideapad_acpi_resume(struct device *dev)
 {
-	struct ideapad_private *priv;
-
-	if (!device)
-		return -EINVAL;
-	priv = dev_get_drvdata(device);
+	struct ideapad_private *priv = dev_get_drvdata(dev);
 
 	ideapad_sync_rfk_state(priv);
 	ideapad_sync_touchpad_state(priv);
+
+	if (priv->dytc)
+		dytc_profile_refresh(priv);
+
 	return 0;
 }
 #endif
 static SIMPLE_DEV_PM_OPS(ideapad_pm, NULL, ideapad_acpi_resume);
 
 static const struct acpi_device_id ideapad_device_ids[] = {
-	{ "VPC2004", 0},
-	{ "", 0},
+	{"VPC2004", 0},
+	{"", 0},
 };
 MODULE_DEVICE_TABLE(acpi, ideapad_device_ids);
 
diff --git a/drivers/platform/x86/intel-uncore-frequency.c b/drivers/platform/x86/intel-uncore-frequency.c
index 12d5ab7e1f5d..3ee4c5c8a64f 100644
--- a/drivers/platform/x86/intel-uncore-frequency.c
+++ b/drivers/platform/x86/intel-uncore-frequency.c
@@ -377,6 +377,7 @@ static const struct x86_cpu_id intel_uncore_cpu_ids[] = {
 	X86_MATCH_INTEL_FAM6_MODEL(SKYLAKE_X,	NULL),
 	X86_MATCH_INTEL_FAM6_MODEL(ICELAKE_X,	NULL),
 	X86_MATCH_INTEL_FAM6_MODEL(ICELAKE_D,	NULL),
+	X86_MATCH_INTEL_FAM6_MODEL(SAPPHIRERAPIDS_X, NULL),
 	{}
 };
 
diff --git a/drivers/platform/x86/intel-vbtn.c b/drivers/platform/x86/intel-vbtn.c
index 30a9062d2b4b..8a8017f9ca91 100644
--- a/drivers/platform/x86/intel-vbtn.c
+++ b/drivers/platform/x86/intel-vbtn.c
@@ -44,6 +44,7 @@ static const struct key_entry intel_vbtn_keymap[] = {
 	{ KE_IGNORE, 0xC7, { KEY_VOLUMEDOWN } },	/* volume-down key release */
 	{ KE_KEY,    0xC8, { KEY_ROTATE_LOCK_TOGGLE } },	/* rotate-lock key press */
 	{ KE_KEY,    0xC9, { KEY_ROTATE_LOCK_TOGGLE } },	/* rotate-lock key release */
+	{ KE_END }
 };
 
 static const struct key_entry intel_vbtn_switchmap[] = {
@@ -51,14 +52,15 @@ static const struct key_entry intel_vbtn_switchmap[] = {
 	{ KE_SW,     0xCB, { .sw = { SW_DOCK, 0 } } },		/* Undocked */
 	{ KE_SW,     0xCC, { .sw = { SW_TABLET_MODE, 1 } } },	/* Tablet */
 	{ KE_SW,     0xCD, { .sw = { SW_TABLET_MODE, 0 } } },	/* Laptop */
+	{ KE_END }
 };
 
 #define KEYMAP_LEN \
 	(ARRAY_SIZE(intel_vbtn_keymap) + ARRAY_SIZE(intel_vbtn_switchmap) + 1)
 
 struct intel_vbtn_priv {
-	struct key_entry keymap[KEYMAP_LEN];
-	struct input_dev *input_dev;
+	struct input_dev *buttons_dev;
+	struct input_dev *switches_dev;
 	bool has_buttons;
 	bool has_switches;
 	bool wakeup_mode;
@@ -77,48 +79,62 @@ static void detect_tablet_mode(struct platform_device *device)
 		return;
 
 	m = !(vgbs & VGBS_TABLET_MODE_FLAGS);
-	input_report_switch(priv->input_dev, SW_TABLET_MODE, m);
+	input_report_switch(priv->switches_dev, SW_TABLET_MODE, m);
 	m = (vgbs & VGBS_DOCK_MODE_FLAG) ? 1 : 0;
-	input_report_switch(priv->input_dev, SW_DOCK, m);
+	input_report_switch(priv->switches_dev, SW_DOCK, m);
 }
 
+/*
+ * Note this unconditionally creates the 2 input_dev-s and sets up
+ * the sparse-keymaps. Only the registration is conditional on
+ * have_buttons / have_switches. This is done so that the notify
+ * handler can always call sparse_keymap_entry_from_scancode()
+ * on the input_dev-s do determine the event type.
+ */
 static int intel_vbtn_input_setup(struct platform_device *device)
 {
 	struct intel_vbtn_priv *priv = dev_get_drvdata(&device->dev);
-	int ret, keymap_len = 0;
+	int ret;
 
-	if (priv->has_buttons) {
-		memcpy(&priv->keymap[keymap_len], intel_vbtn_keymap,
-		       ARRAY_SIZE(intel_vbtn_keymap) *
-		       sizeof(struct key_entry));
-		keymap_len += ARRAY_SIZE(intel_vbtn_keymap);
-	}
+	priv->buttons_dev = devm_input_allocate_device(&device->dev);
+	if (!priv->buttons_dev)
+		return -ENOMEM;
 
-	if (priv->has_switches) {
-		memcpy(&priv->keymap[keymap_len], intel_vbtn_switchmap,
-		       ARRAY_SIZE(intel_vbtn_switchmap) *
-		       sizeof(struct key_entry));
-		keymap_len += ARRAY_SIZE(intel_vbtn_switchmap);
-	}
+	ret = sparse_keymap_setup(priv->buttons_dev, intel_vbtn_keymap, NULL);
+	if (ret)
+		return ret;
 
-	priv->keymap[keymap_len].type = KE_END;
+	priv->buttons_dev->dev.parent = &device->dev;
+	priv->buttons_dev->name = "Intel Virtual Buttons";
+	priv->buttons_dev->id.bustype = BUS_HOST;
 
-	priv->input_dev = devm_input_allocate_device(&device->dev);
-	if (!priv->input_dev)
+	if (priv->has_buttons) {
+		ret = input_register_device(priv->buttons_dev);
+		if (ret)
+			return ret;
+	}
+
+	priv->switches_dev = devm_input_allocate_device(&device->dev);
+	if (!priv->switches_dev)
 		return -ENOMEM;
 
-	ret = sparse_keymap_setup(priv->input_dev, priv->keymap, NULL);
+	ret = sparse_keymap_setup(priv->switches_dev, intel_vbtn_switchmap, NULL);
 	if (ret)
 		return ret;
 
-	priv->input_dev->dev.parent = &device->dev;
-	priv->input_dev->name = "Intel Virtual Button driver";
-	priv->input_dev->id.bustype = BUS_HOST;
+	priv->switches_dev->dev.parent = &device->dev;
+	priv->switches_dev->name = "Intel Virtual Switches";
+	priv->switches_dev->id.bustype = BUS_HOST;
 
-	if (priv->has_switches)
+	if (priv->has_switches) {
 		detect_tablet_mode(device);
 
-	return input_register_device(priv->input_dev);
+		ret = input_register_device(priv->switches_dev);
+		if (ret)
+			return ret;
+	}
+
+	return 0;
 }
 
 static void notify_handler(acpi_handle handle, u32 event, void *context)
@@ -127,48 +143,50 @@ static void notify_handler(acpi_handle handle, u32 event, void *context)
 	struct intel_vbtn_priv *priv = dev_get_drvdata(&device->dev);
 	unsigned int val = !(event & 1); /* Even=press, Odd=release */
 	const struct key_entry *ke, *ke_rel;
+	struct input_dev *input_dev;
 	bool autorelease;
+	int ret;
 
-	if (priv->wakeup_mode) {
-		ke = sparse_keymap_entry_from_scancode(priv->input_dev, event);
-		if (ke) {
-			pm_wakeup_hard_event(&device->dev);
-
-			/*
-			 * Switch events like tablet mode will wake the device
-			 * and report the new switch position to the input
-			 * subsystem.
-			 */
-			if (ke->type == KE_SW)
-				sparse_keymap_report_event(priv->input_dev,
-							   event,
-							   val,
-							   0);
+	if ((ke = sparse_keymap_entry_from_scancode(priv->buttons_dev, event))) {
+		if (!priv->has_buttons) {
+			dev_warn(&device->dev, "Warning: received a button event on a device without buttons, please report this.\n");
 			return;
 		}
-		goto out_unknown;
+		input_dev = priv->buttons_dev;
+	} else if ((ke = sparse_keymap_entry_from_scancode(priv->switches_dev, event))) {
+		if (!priv->has_switches) {
+			dev_info(&device->dev, "Registering Intel Virtual Switches input-dev after receiving a switch event\n");
+			ret = input_register_device(priv->switches_dev);
+			if (ret)
+				return;
+
+			priv->has_switches = true;
+		}
+		input_dev = priv->switches_dev;
+	} else {
+		dev_dbg(&device->dev, "unknown event index 0x%x\n", event);
+		return;
+	}
+
+	if (priv->wakeup_mode) {
+		pm_wakeup_hard_event(&device->dev);
+
+		/*
+		 * Skip reporting an evdev event for button wake events,
+		 * mirroring how the drivers/acpi/button.c code skips this too.
+		 */
+		if (ke->type == KE_KEY)
+			return;
 	}
 
 	/*
 	 * Even press events are autorelease if there is no corresponding odd
 	 * release event, or if the odd event is KE_IGNORE.
 	 */
-	ke_rel = sparse_keymap_entry_from_scancode(priv->input_dev, event | 1);
+	ke_rel = sparse_keymap_entry_from_scancode(input_dev, event | 1);
 	autorelease = val && (!ke_rel || ke_rel->type == KE_IGNORE);
 
-	if (sparse_keymap_report_event(priv->input_dev, event, val, autorelease))
-		return;
-
-out_unknown:
-	dev_dbg(&device->dev, "unknown event index 0x%x\n", event);
-}
-
-static bool intel_vbtn_has_buttons(acpi_handle handle)
-{
-	acpi_status status;
-
-	status = acpi_evaluate_object(handle, "VBDL", NULL, NULL);
-	return ACPI_SUCCESS(status);
+	sparse_keymap_report_event(input_dev, event, val, autorelease);
 }
 
 /*
@@ -245,7 +263,7 @@ static int intel_vbtn_probe(struct platform_device *device)
 	acpi_status status;
 	int err;
 
-	has_buttons = intel_vbtn_has_buttons(handle);
+	has_buttons = acpi_has_method(handle, "VBDL");
 	has_switches = intel_vbtn_has_switches(handle);
 
 	if (!has_buttons && !has_switches) {
@@ -274,6 +292,12 @@ static int intel_vbtn_probe(struct platform_device *device)
 	if (ACPI_FAILURE(status))
 		return -EBUSY;
 
+	if (has_buttons) {
+		status = acpi_evaluate_object(handle, "VBDL", NULL, NULL);
+		if (ACPI_FAILURE(status))
+			dev_err(&device->dev, "Error VBDL failed with ACPI status %d\n", status);
+	}
+
 	device_init_wakeup(&device->dev, true);
 	/*
 	 * In order for system wakeup to work, the EC GPE has to be marked as
diff --git a/drivers/platform/x86/intel_mid_powerbtn.c b/drivers/platform/x86/intel_mid_powerbtn.c
deleted file mode 100644
index df434abbb66f..000000000000
--- a/drivers/platform/x86/intel_mid_powerbtn.c
+++ /dev/null
@@ -1,233 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Power button driver for Intel MID platforms.
- *
- * Copyright (C) 2010,2017 Intel Corp
- *
- * Author: Hong Liu <hong.liu@intel.com>
- * Author: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
- */
-
-#include <linux/input.h>
-#include <linux/interrupt.h>
-#include <linux/mfd/intel_msic.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/pm_wakeirq.h>
-#include <linux/slab.h>
-
-#include <asm/cpu_device_id.h>
-#include <asm/intel-family.h>
-#include <asm/intel_scu_ipc.h>
-
-#define DRIVER_NAME "msic_power_btn"
-
-#define MSIC_PB_LEVEL	(1 << 3) /* 1 - release, 0 - press */
-
-/*
- * MSIC document ti_datasheet defines the 1st bit reg 0x21 is used to mask
- * power button interrupt
- */
-#define MSIC_PWRBTNM    (1 << 0)
-
-/* Intel Tangier */
-#define BCOVE_PB_LEVEL		(1 << 4)	/* 1 - release, 0 - press */
-
-/* Basin Cove PMIC */
-#define BCOVE_PBIRQ		0x02
-#define BCOVE_IRQLVL1MSK	0x0c
-#define BCOVE_PBIRQMASK		0x0d
-#define BCOVE_PBSTATUS		0x27
-
-struct mid_pb_ddata {
-	struct device *dev;
-	int irq;
-	struct input_dev *input;
-	unsigned short mirqlvl1_addr;
-	unsigned short pbstat_addr;
-	u8 pbstat_mask;
-	struct intel_scu_ipc_dev *scu;
-	int (*setup)(struct mid_pb_ddata *ddata);
-};
-
-static int mid_pbstat(struct mid_pb_ddata *ddata, int *value)
-{
-	struct input_dev *input = ddata->input;
-	int ret;
-	u8 pbstat;
-
-	ret = intel_scu_ipc_dev_ioread8(ddata->scu, ddata->pbstat_addr,
-					&pbstat);
-	if (ret)
-		return ret;
-
-	dev_dbg(input->dev.parent, "PB_INT status= %d\n", pbstat);
-
-	*value = !(pbstat & ddata->pbstat_mask);
-	return 0;
-}
-
-static int mid_irq_ack(struct mid_pb_ddata *ddata)
-{
-	return intel_scu_ipc_dev_update(ddata->scu, ddata->mirqlvl1_addr, 0,
-					MSIC_PWRBTNM);
-}
-
-static int mrfld_setup(struct mid_pb_ddata *ddata)
-{
-	/* Unmask the PBIRQ and MPBIRQ on Tangier */
-	intel_scu_ipc_dev_update(ddata->scu, BCOVE_PBIRQ, 0, MSIC_PWRBTNM);
-	intel_scu_ipc_dev_update(ddata->scu, BCOVE_PBIRQMASK, 0, MSIC_PWRBTNM);
-
-	return 0;
-}
-
-static irqreturn_t mid_pb_isr(int irq, void *dev_id)
-{
-	struct mid_pb_ddata *ddata = dev_id;
-	struct input_dev *input = ddata->input;
-	int value = 0;
-	int ret;
-
-	ret = mid_pbstat(ddata, &value);
-	if (ret < 0) {
-		dev_err(input->dev.parent,
-			"Read error %d while reading MSIC_PB_STATUS\n", ret);
-	} else {
-		input_event(input, EV_KEY, KEY_POWER, value);
-		input_sync(input);
-	}
-
-	mid_irq_ack(ddata);
-	return IRQ_HANDLED;
-}
-
-static const struct mid_pb_ddata mfld_ddata = {
-	.mirqlvl1_addr	= INTEL_MSIC_IRQLVL1MSK,
-	.pbstat_addr	= INTEL_MSIC_PBSTATUS,
-	.pbstat_mask	= MSIC_PB_LEVEL,
-};
-
-static const struct mid_pb_ddata mrfld_ddata = {
-	.mirqlvl1_addr	= BCOVE_IRQLVL1MSK,
-	.pbstat_addr	= BCOVE_PBSTATUS,
-	.pbstat_mask	= BCOVE_PB_LEVEL,
-	.setup	= mrfld_setup,
-};
-
-static const struct x86_cpu_id mid_pb_cpu_ids[] = {
-	X86_MATCH_INTEL_FAM6_MODEL(ATOM_SALTWELL_MID,	&mfld_ddata),
-	X86_MATCH_INTEL_FAM6_MODEL(ATOM_SILVERMONT_MID,	&mrfld_ddata),
-	{}
-};
-
-static int mid_pb_probe(struct platform_device *pdev)
-{
-	const struct x86_cpu_id *id;
-	struct mid_pb_ddata *ddata;
-	struct input_dev *input;
-	int irq = platform_get_irq(pdev, 0);
-	int error;
-
-	id = x86_match_cpu(mid_pb_cpu_ids);
-	if (!id)
-		return -ENODEV;
-
-	if (irq < 0) {
-		dev_err(&pdev->dev, "Failed to get IRQ: %d\n", irq);
-		return irq;
-	}
-
-	input = devm_input_allocate_device(&pdev->dev);
-	if (!input)
-		return -ENOMEM;
-
-	input->name = pdev->name;
-	input->phys = "power-button/input0";
-	input->id.bustype = BUS_HOST;
-	input->dev.parent = &pdev->dev;
-
-	input_set_capability(input, EV_KEY, KEY_POWER);
-
-	ddata = devm_kmemdup(&pdev->dev, (void *)id->driver_data,
-			     sizeof(*ddata), GFP_KERNEL);
-	if (!ddata)
-		return -ENOMEM;
-
-	ddata->dev = &pdev->dev;
-	ddata->irq = irq;
-	ddata->input = input;
-
-	if (ddata->setup) {
-		error = ddata->setup(ddata);
-		if (error)
-			return error;
-	}
-
-	ddata->scu = devm_intel_scu_ipc_dev_get(&pdev->dev);
-	if (!ddata->scu)
-		return -EPROBE_DEFER;
-
-	error = devm_request_threaded_irq(&pdev->dev, irq, NULL, mid_pb_isr,
-					  IRQF_ONESHOT, DRIVER_NAME, ddata);
-	if (error) {
-		dev_err(&pdev->dev,
-			"Unable to request irq %d for MID power button\n", irq);
-		return error;
-	}
-
-	error = input_register_device(input);
-	if (error) {
-		dev_err(&pdev->dev,
-			"Unable to register input dev, error %d\n", error);
-		return error;
-	}
-
-	platform_set_drvdata(pdev, ddata);
-
-	/*
-	 * SCU firmware might send power button interrupts to IA core before
-	 * kernel boots and doesn't get EOI from IA core. The first bit of
-	 * MSIC reg 0x21 is kept masked, and SCU firmware doesn't send new
-	 * power interrupt to Android kernel. Unmask the bit when probing
-	 * power button in kernel.
-	 * There is a very narrow race between irq handler and power button
-	 * initialization. The race happens rarely. So we needn't worry
-	 * about it.
-	 */
-	error = mid_irq_ack(ddata);
-	if (error) {
-		dev_err(&pdev->dev,
-			"Unable to clear power button interrupt, error: %d\n",
-			error);
-		return error;
-	}
-
-	device_init_wakeup(&pdev->dev, true);
-	dev_pm_set_wake_irq(&pdev->dev, irq);
-
-	return 0;
-}
-
-static int mid_pb_remove(struct platform_device *pdev)
-{
-	dev_pm_clear_wake_irq(&pdev->dev);
-	device_init_wakeup(&pdev->dev, false);
-
-	return 0;
-}
-
-static struct platform_driver mid_pb_driver = {
-	.driver = {
-		.name = DRIVER_NAME,
-	},
-	.probe	= mid_pb_probe,
-	.remove	= mid_pb_remove,
-};
-
-module_platform_driver(mid_pb_driver);
-
-MODULE_AUTHOR("Hong Liu <hong.liu@intel.com>");
-MODULE_DESCRIPTION("Intel MID Power Button Driver");
-MODULE_LICENSE("GPL v2");
-MODULE_ALIAS("platform:" DRIVER_NAME);
diff --git a/drivers/platform/x86/intel_mid_thermal.c b/drivers/platform/x86/intel_mid_thermal.c
deleted file mode 100644
index f12f4e7bd971..000000000000
--- a/drivers/platform/x86/intel_mid_thermal.c
+++ /dev/null
@@ -1,560 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Intel MID platform thermal driver
- *
- * Copyright (C) 2011 Intel Corporation
- *
- * Author: Durgadoss R <durgadoss.r@intel.com>
- */
-
-#define pr_fmt(fmt) "intel_mid_thermal: " fmt
-
-#include <linux/device.h>
-#include <linux/err.h>
-#include <linux/mfd/intel_msic.h>
-#include <linux/module.h>
-#include <linux/param.h>
-#include <linux/platform_device.h>
-#include <linux/pm.h>
-#include <linux/slab.h>
-#include <linux/thermal.h>
-
-/* Number of thermal sensors */
-#define MSIC_THERMAL_SENSORS	4
-
-/* ADC1 - thermal registers */
-#define MSIC_ADC_ENBL		0x10
-#define MSIC_ADC_START		0x08
-
-#define MSIC_ADCTHERM_ENBL	0x04
-#define MSIC_ADCRRDATA_ENBL	0x05
-#define MSIC_CHANL_MASK_VAL	0x0F
-
-#define MSIC_STOPBIT_MASK	16
-#define MSIC_ADCTHERM_MASK	4
-/* Number of ADC channels */
-#define ADC_CHANLS_MAX		15
-#define ADC_LOOP_MAX		(ADC_CHANLS_MAX - MSIC_THERMAL_SENSORS)
-
-/* ADC channel code values */
-#define SKIN_SENSOR0_CODE	0x08
-#define SKIN_SENSOR1_CODE	0x09
-#define SYS_SENSOR_CODE		0x0A
-#define MSIC_DIE_SENSOR_CODE	0x03
-
-#define SKIN_THERM_SENSOR0	0
-#define SKIN_THERM_SENSOR1	1
-#define SYS_THERM_SENSOR2	2
-#define MSIC_DIE_THERM_SENSOR3	3
-
-/* ADC code range */
-#define ADC_MAX			977
-#define ADC_MIN			162
-#define ADC_VAL0C		887
-#define ADC_VAL20C		720
-#define ADC_VAL40C		508
-#define ADC_VAL60C		315
-
-/* ADC base addresses */
-#define ADC_CHNL_START_ADDR	INTEL_MSIC_ADC1ADDR0	/* increments by 1 */
-#define ADC_DATA_START_ADDR	INTEL_MSIC_ADC1SNS0H	/* increments by 2 */
-
-/* MSIC die attributes */
-#define MSIC_DIE_ADC_MIN	488
-#define MSIC_DIE_ADC_MAX	1004
-
-/* This holds the address of the first free ADC channel,
- * among the 15 channels
- */
-static int channel_index;
-
-struct platform_info {
-	struct platform_device *pdev;
-	struct thermal_zone_device *tzd[MSIC_THERMAL_SENSORS];
-};
-
-struct thermal_device_info {
-	unsigned int chnl_addr;
-	int direct;
-	/* This holds the current temperature in millidegree celsius */
-	long curr_temp;
-};
-
-/**
- * to_msic_die_temp - converts adc_val to msic_die temperature
- * @adc_val: ADC value to be converted
- *
- * Can sleep
- */
-static int to_msic_die_temp(uint16_t adc_val)
-{
-	return (368 * (adc_val) / 1000) - 220;
-}
-
-/**
- * is_valid_adc - checks whether the adc code is within the defined range
- * @min: minimum value for the sensor
- * @max: maximum value for the sensor
- *
- * Can sleep
- */
-static int is_valid_adc(uint16_t adc_val, uint16_t min, uint16_t max)
-{
-	return (adc_val >= min) && (adc_val <= max);
-}
-
-/**
- * adc_to_temp - converts the ADC code to temperature in C
- * @direct: true if ths channel is direct index
- * @adc_val: the adc_val that needs to be converted
- * @tp: temperature return value
- *
- * Linear approximation is used to covert the skin adc value into temperature.
- * This technique is used to avoid very long look-up table to get
- * the appropriate temp value from ADC value.
- * The adc code vs sensor temp curve is split into five parts
- * to achieve very close approximate temp value with less than
- * 0.5C error
- */
-static int adc_to_temp(int direct, uint16_t adc_val, int *tp)
-{
-	int temp;
-
-	/* Direct conversion for die temperature */
-	if (direct) {
-		if (is_valid_adc(adc_val, MSIC_DIE_ADC_MIN, MSIC_DIE_ADC_MAX)) {
-			*tp = to_msic_die_temp(adc_val) * 1000;
-			return 0;
-		}
-		return -ERANGE;
-	}
-
-	if (!is_valid_adc(adc_val, ADC_MIN, ADC_MAX))
-		return -ERANGE;
-
-	/* Linear approximation for skin temperature */
-	if (adc_val > ADC_VAL0C)
-		temp = 177 - (adc_val/5);
-	else if ((adc_val <= ADC_VAL0C) && (adc_val > ADC_VAL20C))
-		temp = 111 - (adc_val/8);
-	else if ((adc_val <= ADC_VAL20C) && (adc_val > ADC_VAL40C))
-		temp = 92 - (adc_val/10);
-	else if ((adc_val <= ADC_VAL40C) && (adc_val > ADC_VAL60C))
-		temp = 91 - (adc_val/10);
-	else
-		temp = 112 - (adc_val/6);
-
-	/* Convert temperature in celsius to milli degree celsius */
-	*tp = temp * 1000;
-	return 0;
-}
-
-/**
- * mid_read_temp - read sensors for temperature
- * @temp: holds the current temperature for the sensor after reading
- *
- * reads the adc_code from the channel and converts it to real
- * temperature. The converted value is stored in temp.
- *
- * Can sleep
- */
-static int mid_read_temp(struct thermal_zone_device *tzd, int *temp)
-{
-	struct thermal_device_info *td_info = tzd->devdata;
-	uint16_t adc_val, addr;
-	uint8_t data = 0;
-	int ret;
-	int curr_temp;
-
-	addr = td_info->chnl_addr;
-
-	/* Enable the msic for conversion before reading */
-	ret = intel_msic_reg_write(INTEL_MSIC_ADC1CNTL3, MSIC_ADCRRDATA_ENBL);
-	if (ret)
-		return ret;
-
-	/* Re-toggle the RRDATARD bit (temporary workaround) */
-	ret = intel_msic_reg_write(INTEL_MSIC_ADC1CNTL3, MSIC_ADCTHERM_ENBL);
-	if (ret)
-		return ret;
-
-	/* Read the higher bits of data */
-	ret = intel_msic_reg_read(addr, &data);
-	if (ret)
-		return ret;
-
-	/* Shift bits to accommodate the lower two data bits */
-	adc_val = (data << 2);
-	addr++;
-
-	ret = intel_msic_reg_read(addr, &data);/* Read lower bits */
-	if (ret)
-		return ret;
-
-	/* Adding lower two bits to the higher bits */
-	data &= 03;
-	adc_val += data;
-
-	/* Convert ADC value to temperature */
-	ret = adc_to_temp(td_info->direct, adc_val, &curr_temp);
-	if (ret == 0)
-		*temp = td_info->curr_temp = curr_temp;
-	return ret;
-}
-
-/**
- * configure_adc - enables/disables the ADC for conversion
- * @val: zero: disables the ADC non-zero:enables the ADC
- *
- * Enable/Disable the ADC depending on the argument
- *
- * Can sleep
- */
-static int configure_adc(int val)
-{
-	int ret;
-	uint8_t data;
-
-	ret = intel_msic_reg_read(INTEL_MSIC_ADC1CNTL1, &data);
-	if (ret)
-		return ret;
-
-	if (val) {
-		/* Enable and start the ADC */
-		data |= (MSIC_ADC_ENBL | MSIC_ADC_START);
-	} else {
-		/* Just stop the ADC */
-		data &= (~MSIC_ADC_START);
-	}
-	return intel_msic_reg_write(INTEL_MSIC_ADC1CNTL1, data);
-}
-
-/**
- * set_up_therm_channel - enable thermal channel for conversion
- * @base_addr: index of free msic ADC channel
- *
- * Enable all the three channels for conversion
- *
- * Can sleep
- */
-static int set_up_therm_channel(u16 base_addr)
-{
-	int ret;
-
-	/* Enable all the sensor channels */
-	ret = intel_msic_reg_write(base_addr, SKIN_SENSOR0_CODE);
-	if (ret)
-		return ret;
-
-	ret = intel_msic_reg_write(base_addr + 1, SKIN_SENSOR1_CODE);
-	if (ret)
-		return ret;
-
-	ret = intel_msic_reg_write(base_addr + 2, SYS_SENSOR_CODE);
-	if (ret)
-		return ret;
-
-	/* Since this is the last channel, set the stop bit
-	 * to 1 by ORing the DIE_SENSOR_CODE with 0x10 */
-	ret = intel_msic_reg_write(base_addr + 3,
-			(MSIC_DIE_SENSOR_CODE | 0x10));
-	if (ret)
-		return ret;
-
-	/* Enable ADC and start it */
-	return configure_adc(1);
-}
-
-/**
- * reset_stopbit - sets the stop bit to 0 on the given channel
- * @addr: address of the channel
- *
- * Can sleep
- */
-static int reset_stopbit(uint16_t addr)
-{
-	int ret;
-	uint8_t data;
-	ret = intel_msic_reg_read(addr, &data);
-	if (ret)
-		return ret;
-	/* Set the stop bit to zero */
-	return intel_msic_reg_write(addr, (data & 0xEF));
-}
-
-/**
- * find_free_channel - finds an empty channel for conversion
- *
- * If the ADC is not enabled then start using 0th channel
- * itself. Otherwise find an empty channel by looking for a
- * channel in which the stopbit is set to 1. returns the index
- * of the first free channel if succeeds or an error code.
- *
- * Context: can sleep
- *
- * FIXME: Ultimately the channel allocator will move into the intel_scu_ipc
- * code.
- */
-static int find_free_channel(void)
-{
-	int ret;
-	int i;
-	uint8_t data;
-
-	/* check whether ADC is enabled */
-	ret = intel_msic_reg_read(INTEL_MSIC_ADC1CNTL1, &data);
-	if (ret)
-		return ret;
-
-	if ((data & MSIC_ADC_ENBL) == 0)
-		return 0;
-
-	/* ADC is already enabled; Looking for an empty channel */
-	for (i = 0; i < ADC_CHANLS_MAX; i++) {
-		ret = intel_msic_reg_read(ADC_CHNL_START_ADDR + i, &data);
-		if (ret)
-			return ret;
-
-		if (data & MSIC_STOPBIT_MASK) {
-			ret = i;
-			break;
-		}
-	}
-	return (ret > ADC_LOOP_MAX) ? (-EINVAL) : ret;
-}
-
-/**
- * mid_initialize_adc - initializing the ADC
- * @dev: our device structure
- *
- * Initialize the ADC for reading thermistor values. Can sleep.
- */
-static int mid_initialize_adc(struct device *dev)
-{
-	u8  data;
-	u16 base_addr;
-	int ret;
-
-	/*
-	 * Ensure that adctherm is disabled before we
-	 * initialize the ADC
-	 */
-	ret = intel_msic_reg_read(INTEL_MSIC_ADC1CNTL3, &data);
-	if (ret)
-		return ret;
-
-	data &= ~MSIC_ADCTHERM_MASK;
-	ret = intel_msic_reg_write(INTEL_MSIC_ADC1CNTL3, data);
-	if (ret)
-		return ret;
-
-	/* Index of the first channel in which the stop bit is set */
-	channel_index = find_free_channel();
-	if (channel_index < 0) {
-		dev_err(dev, "No free ADC channels");
-		return channel_index;
-	}
-
-	base_addr = ADC_CHNL_START_ADDR + channel_index;
-
-	if (!(channel_index == 0 || channel_index == ADC_LOOP_MAX)) {
-		/* Reset stop bit for channels other than 0 and 12 */
-		ret = reset_stopbit(base_addr);
-		if (ret)
-			return ret;
-
-		/* Index of the first free channel */
-		base_addr++;
-		channel_index++;
-	}
-
-	ret = set_up_therm_channel(base_addr);
-	if (ret) {
-		dev_err(dev, "unable to enable ADC");
-		return ret;
-	}
-	dev_dbg(dev, "ADC initialization successful");
-	return ret;
-}
-
-/**
- * initialize_sensor - sets default temp and timer ranges
- * @index: index of the sensor
- *
- * Context: can sleep
- */
-static struct thermal_device_info *initialize_sensor(int index)
-{
-	struct thermal_device_info *td_info =
-		kzalloc(sizeof(struct thermal_device_info), GFP_KERNEL);
-
-	if (!td_info)
-		return NULL;
-
-	/* Set the base addr of the channel for this sensor */
-	td_info->chnl_addr = ADC_DATA_START_ADDR + 2 * (channel_index + index);
-	/* Sensor 3 is direct conversion */
-	if (index == 3)
-		td_info->direct = 1;
-	return td_info;
-}
-
-#ifdef CONFIG_PM_SLEEP
-/**
- * mid_thermal_resume - resume routine
- * @dev: device structure
- *
- * mid thermal resume: re-initializes the adc. Can sleep.
- */
-static int mid_thermal_resume(struct device *dev)
-{
-	return mid_initialize_adc(dev);
-}
-
-/**
- * mid_thermal_suspend - suspend routine
- * @dev: device structure
- *
- * mid thermal suspend implements the suspend functionality
- * by stopping the ADC. Can sleep.
- */
-static int mid_thermal_suspend(struct device *dev)
-{
-	/*
-	 * This just stops the ADC and does not disable it.
-	 * temporary workaround until we have a generic ADC driver.
-	 * If 0 is passed, it disables the ADC.
-	 */
-	return configure_adc(0);
-}
-#endif
-
-static SIMPLE_DEV_PM_OPS(mid_thermal_pm,
-			 mid_thermal_suspend, mid_thermal_resume);
-
-/**
- * read_curr_temp - reads the current temperature and stores in temp
- * @temp: holds the current temperature value after reading
- *
- * Can sleep
- */
-static int read_curr_temp(struct thermal_zone_device *tzd, int *temp)
-{
-	WARN_ON(tzd == NULL);
-	return mid_read_temp(tzd, temp);
-}
-
-/* Can't be const */
-static struct thermal_zone_device_ops tzd_ops = {
-	.get_temp = read_curr_temp,
-};
-
-/**
- * mid_thermal_probe - mfld thermal initialize
- * @pdev: platform device structure
- *
- * mid thermal probe initializes the hardware and registers
- * all the sensors with the generic thermal framework. Can sleep.
- */
-static int mid_thermal_probe(struct platform_device *pdev)
-{
-	static char *name[MSIC_THERMAL_SENSORS] = {
-		"skin0", "skin1", "sys", "msicdie"
-	};
-
-	int ret;
-	int i;
-	struct platform_info *pinfo;
-
-	pinfo = devm_kzalloc(&pdev->dev, sizeof(struct platform_info),
-			     GFP_KERNEL);
-	if (!pinfo)
-		return -ENOMEM;
-
-	/* Initializing the hardware */
-	ret = mid_initialize_adc(&pdev->dev);
-	if (ret) {
-		dev_err(&pdev->dev, "ADC init failed");
-		return ret;
-	}
-
-	/* Register each sensor with the generic thermal framework*/
-	for (i = 0; i < MSIC_THERMAL_SENSORS; i++) {
-		struct thermal_device_info *td_info = initialize_sensor(i);
-
-		if (!td_info) {
-			ret = -ENOMEM;
-			goto err;
-		}
-		pinfo->tzd[i] = thermal_zone_device_register(name[i],
-				0, 0, td_info, &tzd_ops, NULL, 0, 0);
-		if (IS_ERR(pinfo->tzd[i])) {
-			kfree(td_info);
-			ret = PTR_ERR(pinfo->tzd[i]);
-			goto err;
-		}
-		ret = thermal_zone_device_enable(pinfo->tzd[i]);
-		if (ret) {
-			kfree(td_info);
-			thermal_zone_device_unregister(pinfo->tzd[i]);
-			goto err;
-		}
-	}
-
-	pinfo->pdev = pdev;
-	platform_set_drvdata(pdev, pinfo);
-	return 0;
-
-err:
-	while (--i >= 0) {
-		kfree(pinfo->tzd[i]->devdata);
-		thermal_zone_device_unregister(pinfo->tzd[i]);
-	}
-	configure_adc(0);
-	return ret;
-}
-
-/**
- * mid_thermal_remove - mfld thermal finalize
- * @dev: platform device structure
- *
- * MLFD thermal remove unregisters all the sensors from the generic
- * thermal framework. Can sleep.
- */
-static int mid_thermal_remove(struct platform_device *pdev)
-{
-	int i;
-	struct platform_info *pinfo = platform_get_drvdata(pdev);
-
-	for (i = 0; i < MSIC_THERMAL_SENSORS; i++) {
-		kfree(pinfo->tzd[i]->devdata);
-		thermal_zone_device_unregister(pinfo->tzd[i]);
-	}
-
-	/* Stop the ADC */
-	return configure_adc(0);
-}
-
-#define DRIVER_NAME "msic_thermal"
-
-static const struct platform_device_id therm_id_table[] = {
-	{ DRIVER_NAME, 1 },
-	{ }
-};
-MODULE_DEVICE_TABLE(platform, therm_id_table);
-
-static struct platform_driver mid_thermal_driver = {
-	.driver = {
-		.name = DRIVER_NAME,
-		.pm = &mid_thermal_pm,
-	},
-	.probe = mid_thermal_probe,
-	.remove = mid_thermal_remove,
-	.id_table = therm_id_table,
-};
-
-module_platform_driver(mid_thermal_driver);
-
-MODULE_AUTHOR("Durgadoss R <durgadoss.r@intel.com>");
-MODULE_DESCRIPTION("Intel Medfield Platform Thermal Driver");
-MODULE_LICENSE("GPL v2");
diff --git a/drivers/platform/x86/intel_scu_ipc.c b/drivers/platform/x86/intel_scu_ipc.c
index d9cf7f7602b0..9171a46a9e3f 100644
--- a/drivers/platform/x86/intel_scu_ipc.c
+++ b/drivers/platform/x86/intel_scu_ipc.c
@@ -75,7 +75,7 @@ struct intel_scu_ipc_dev {
 #define IPC_READ_BUFFER		0x90
 
 /* Timeout in jiffies */
-#define IPC_TIMEOUT		(3 * HZ)
+#define IPC_TIMEOUT		(5 * HZ)
 
 static struct intel_scu_ipc_dev *ipcdev; /* Only one for now */
 static DEFINE_MUTEX(ipclock); /* lock used to prevent multiple call to SCU */
diff --git a/drivers/platform/x86/intel_scu_wdt.c b/drivers/platform/x86/intel_scu_wdt.c
new file mode 100644
index 000000000000..c2479777a1d6
--- /dev/null
+++ b/drivers/platform/x86/intel_scu_wdt.c
@@ -0,0 +1,75 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Intel Merrifield watchdog platform device library file
+ *
+ * (C) Copyright 2014 Intel Corporation
+ * Author: David Cohen <david.a.cohen@linux.intel.com>
+ */
+
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/platform_data/intel-mid_wdt.h>
+
+#include <asm/cpu_device_id.h>
+#include <asm/intel-family.h>
+#include <asm/intel-mid.h>
+#include <asm/io_apic.h>
+#include <asm/hw_irq.h>
+
+#define TANGIER_EXT_TIMER0_MSI 12
+
+static struct platform_device wdt_dev = {
+	.name = "intel_mid_wdt",
+	.id = -1,
+};
+
+static int tangier_probe(struct platform_device *pdev)
+{
+	struct irq_alloc_info info;
+	struct intel_mid_wdt_pdata *pdata = pdev->dev.platform_data;
+	int gsi = TANGIER_EXT_TIMER0_MSI;
+	int irq;
+
+	if (!pdata)
+		return -EINVAL;
+
+	/* IOAPIC builds identity mapping between GSI and IRQ on MID */
+	ioapic_set_alloc_attr(&info, cpu_to_node(0), 1, 0);
+	irq = mp_map_gsi_to_irq(gsi, IOAPIC_MAP_ALLOC, &info);
+	if (irq < 0) {
+		dev_warn(&pdev->dev, "cannot find interrupt %d in ioapic\n", gsi);
+		return irq;
+	}
+
+	pdata->irq = irq;
+	return 0;
+}
+
+static struct intel_mid_wdt_pdata tangier_pdata = {
+	.probe = tangier_probe,
+};
+
+static const struct x86_cpu_id intel_mid_cpu_ids[] = {
+	X86_MATCH_INTEL_FAM6_MODEL(ATOM_SILVERMONT_MID, &tangier_pdata),
+	{}
+};
+
+static int __init register_mid_wdt(void)
+{
+	const struct x86_cpu_id *id;
+
+	id = x86_match_cpu(intel_mid_cpu_ids);
+	if (!id)
+		return -ENODEV;
+
+	wdt_dev.dev.platform_data = (struct intel_mid_wdt_pdata *)id->driver_data;
+	return platform_device_register(&wdt_dev);
+}
+arch_initcall(register_mid_wdt);
+
+static void __exit unregister_mid_wdt(void)
+{
+	platform_device_unregister(&wdt_dev);
+}
+__exitcall(unregister_mid_wdt);
diff --git a/drivers/platform/x86/msi-wmi.c b/drivers/platform/x86/msi-wmi.c
index 64ee7819c9d3..fd318cdfe313 100644
--- a/drivers/platform/x86/msi-wmi.c
+++ b/drivers/platform/x86/msi-wmi.c
@@ -96,6 +96,8 @@ static int msi_wmi_query_block(int instance, int *ret)
 	struct acpi_buffer output = { ACPI_ALLOCATE_BUFFER, NULL };
 
 	status = wmi_query_block(MSIWMI_BIOS_GUID, instance, &output);
+	if (ACPI_FAILURE(status))
+		return -EIO;
 
 	obj = output.pointer;
 
diff --git a/drivers/platform/x86/thinkpad_acpi.c b/drivers/platform/x86/thinkpad_acpi.c
index f3e8eca8d86d..b881044b31b0 100644
--- a/drivers/platform/x86/thinkpad_acpi.c
+++ b/drivers/platform/x86/thinkpad_acpi.c
@@ -66,6 +66,7 @@
 #include <linux/acpi.h>
 #include <linux/pci.h>
 #include <linux/power_supply.h>
+#include <linux/platform_profile.h>
 #include <sound/core.h>
 #include <sound/control.h>
 #include <sound/initval.h>
@@ -9855,16 +9856,27 @@ static bool has_lapsensor;
 static bool palm_state;
 static bool lap_state;
 
-static int lapsensor_get(bool *present, bool *state)
+static int dytc_command(int command, int *output)
 {
 	acpi_handle dytc_handle;
-	int output;
 
-	*present = false;
-	if (ACPI_FAILURE(acpi_get_handle(hkey_handle, "DYTC", &dytc_handle)))
+	if (ACPI_FAILURE(acpi_get_handle(hkey_handle, "DYTC", &dytc_handle))) {
+		/* Platform doesn't support DYTC */
 		return -ENODEV;
-	if (!acpi_evalf(dytc_handle, &output, NULL, "dd", DYTC_CMD_GET))
+	}
+	if (!acpi_evalf(dytc_handle, output, NULL, "dd", command))
 		return -EIO;
+	return 0;
+}
+
+static int lapsensor_get(bool *present, bool *state)
+{
+	int output, err;
+
+	*present = false;
+	err = dytc_command(DYTC_CMD_GET, &output);
+	if (err)
+		return err;
 
 	*present = true; /*If we get his far, we have lapmode support*/
 	*state = output & BIT(DYTC_GET_LAPMODE_BIT) ? true : false;
@@ -9983,6 +9995,434 @@ static struct ibm_struct proxsensor_driver_data = {
 	.exit = proxsensor_exit,
 };
 
+/*************************************************************************
+ * DYTC Platform Profile interface
+ */
+
+#define DYTC_CMD_QUERY        0 /* To get DYTC status - enable/revision */
+#define DYTC_CMD_SET          1 /* To enable/disable IC function mode */
+#define DYTC_CMD_RESET    0x1ff /* To reset back to default */
+
+#define DYTC_QUERY_ENABLE_BIT 8  /* Bit        8 - 0 = disabled, 1 = enabled */
+#define DYTC_QUERY_SUBREV_BIT 16 /* Bits 16 - 27 - sub revision */
+#define DYTC_QUERY_REV_BIT    28 /* Bits 28 - 31 - revision */
+
+#define DYTC_GET_FUNCTION_BIT 8  /* Bits  8-11 - function setting */
+#define DYTC_GET_MODE_BIT     12 /* Bits 12-15 - mode setting */
+
+#define DYTC_SET_FUNCTION_BIT 12 /* Bits 12-15 - function setting */
+#define DYTC_SET_MODE_BIT     16 /* Bits 16-19 - mode setting */
+#define DYTC_SET_VALID_BIT    20 /* Bit     20 - 1 = on, 0 = off */
+
+#define DYTC_FUNCTION_STD     0  /* Function = 0, standard mode */
+#define DYTC_FUNCTION_CQL     1  /* Function = 1, lap mode */
+#define DYTC_FUNCTION_MMC     11 /* Function = 11, desk mode */
+
+#define DYTC_MODE_PERFORM     2  /* High power mode aka performance */
+#define DYTC_MODE_LOWPOWER    3  /* Low power mode */
+#define DYTC_MODE_BALANCE   0xF  /* Default mode aka balanced */
+
+#define DYTC_SET_COMMAND(function, mode, on) \
+	(DYTC_CMD_SET | (function) << DYTC_SET_FUNCTION_BIT | \
+	 (mode) << DYTC_SET_MODE_BIT | \
+	 (on) << DYTC_SET_VALID_BIT)
+
+#define DYTC_DISABLE_CQL DYTC_SET_COMMAND(DYTC_FUNCTION_CQL, DYTC_MODE_BALANCE, 0)
+
+#define DYTC_ENABLE_CQL DYTC_SET_COMMAND(DYTC_FUNCTION_CQL, DYTC_MODE_BALANCE, 1)
+
+static bool dytc_profile_available;
+static enum platform_profile_option dytc_current_profile;
+static atomic_t dytc_ignore_event = ATOMIC_INIT(0);
+static DEFINE_MUTEX(dytc_mutex);
+
+static int convert_dytc_to_profile(int dytcmode, enum platform_profile_option *profile)
+{
+	switch (dytcmode) {
+	case DYTC_MODE_LOWPOWER:
+		*profile = PLATFORM_PROFILE_LOW_POWER;
+		break;
+	case DYTC_MODE_BALANCE:
+		*profile =  PLATFORM_PROFILE_BALANCED;
+		break;
+	case DYTC_MODE_PERFORM:
+		*profile =  PLATFORM_PROFILE_PERFORMANCE;
+		break;
+	default: /* Unknown mode */
+		return -EINVAL;
+	}
+	return 0;
+}
+
+static int convert_profile_to_dytc(enum platform_profile_option profile, int *perfmode)
+{
+	switch (profile) {
+	case PLATFORM_PROFILE_LOW_POWER:
+		*perfmode = DYTC_MODE_LOWPOWER;
+		break;
+	case PLATFORM_PROFILE_BALANCED:
+		*perfmode = DYTC_MODE_BALANCE;
+		break;
+	case PLATFORM_PROFILE_PERFORMANCE:
+		*perfmode = DYTC_MODE_PERFORM;
+		break;
+	default: /* Unknown profile */
+		return -EOPNOTSUPP;
+	}
+	return 0;
+}
+
+/*
+ * dytc_profile_get: Function to register with platform_profile
+ * handler. Returns current platform profile.
+ */
+static int dytc_profile_get(struct platform_profile_handler *pprof,
+			    enum platform_profile_option *profile)
+{
+	*profile = dytc_current_profile;
+	return 0;
+}
+
+/*
+ * Helper function - check if we are in CQL mode and if we are
+ *  -  disable CQL,
+ *  - run the command
+ *  - enable CQL
+ *  If not in CQL mode, just run the command
+ */
+static int dytc_cql_command(int command, int *output)
+{
+	int err, cmd_err, dummy;
+	int cur_funcmode;
+
+	/* Determine if we are in CQL mode. This alters the commands we do */
+	err = dytc_command(DYTC_CMD_GET, output);
+	if (err)
+		return err;
+
+	cur_funcmode = (*output >> DYTC_GET_FUNCTION_BIT) & 0xF;
+	/* Check if we're OK to return immediately */
+	if ((command == DYTC_CMD_GET) && (cur_funcmode != DYTC_FUNCTION_CQL))
+		return 0;
+
+	if (cur_funcmode == DYTC_FUNCTION_CQL) {
+		atomic_inc(&dytc_ignore_event);
+		err = dytc_command(DYTC_DISABLE_CQL, &dummy);
+		if (err)
+			return err;
+	}
+
+	cmd_err = dytc_command(command,	output);
+	/* Check return condition after we've restored CQL state */
+
+	if (cur_funcmode == DYTC_FUNCTION_CQL) {
+		err = dytc_command(DYTC_ENABLE_CQL, &dummy);
+		if (err)
+			return err;
+	}
+
+	return cmd_err;
+}
+
+/*
+ * dytc_profile_set: Function to register with platform_profile
+ * handler. Sets current platform profile.
+ */
+static int dytc_profile_set(struct platform_profile_handler *pprof,
+			    enum platform_profile_option profile)
+{
+	int output;
+	int err;
+
+	if (!dytc_profile_available)
+		return -ENODEV;
+
+	err = mutex_lock_interruptible(&dytc_mutex);
+	if (err)
+		return err;
+
+	if (profile == PLATFORM_PROFILE_BALANCED) {
+		/* To get back to balanced mode we just issue a reset command */
+		err = dytc_command(DYTC_CMD_RESET, &output);
+		if (err)
+			goto unlock;
+	} else {
+		int perfmode;
+
+		err = convert_profile_to_dytc(profile, &perfmode);
+		if (err)
+			goto unlock;
+
+		/* Determine if we are in CQL mode. This alters the commands we do */
+		err = dytc_cql_command(DYTC_SET_COMMAND(DYTC_FUNCTION_MMC, perfmode, 1), &output);
+		if (err)
+			goto unlock;
+	}
+	/* Success - update current profile */
+	dytc_current_profile = profile;
+unlock:
+	mutex_unlock(&dytc_mutex);
+	return err;
+}
+
+static void dytc_profile_refresh(void)
+{
+	enum platform_profile_option profile;
+	int output, err;
+	int perfmode;
+
+	mutex_lock(&dytc_mutex);
+	err = dytc_cql_command(DYTC_CMD_GET, &output);
+	mutex_unlock(&dytc_mutex);
+	if (err)
+		return;
+
+	perfmode = (output >> DYTC_GET_MODE_BIT) & 0xF;
+	convert_dytc_to_profile(perfmode, &profile);
+	if (profile != dytc_current_profile) {
+		dytc_current_profile = profile;
+		platform_profile_notify();
+	}
+}
+
+static struct platform_profile_handler dytc_profile = {
+	.profile_get = dytc_profile_get,
+	.profile_set = dytc_profile_set,
+};
+
+static int tpacpi_dytc_profile_init(struct ibm_init_struct *iibm)
+{
+	int err, output;
+
+	/* Setup supported modes */
+	set_bit(PLATFORM_PROFILE_LOW_POWER, dytc_profile.choices);
+	set_bit(PLATFORM_PROFILE_BALANCED, dytc_profile.choices);
+	set_bit(PLATFORM_PROFILE_PERFORMANCE, dytc_profile.choices);
+
+	dytc_profile_available = false;
+	err = dytc_command(DYTC_CMD_QUERY, &output);
+	/*
+	 * If support isn't available (ENODEV) then don't return an error
+	 * and don't create the sysfs group
+	 */
+	if (err == -ENODEV)
+		return 0;
+	/* For all other errors we can flag the failure */
+	if (err)
+		return err;
+
+	/* Check DYTC is enabled and supports mode setting */
+	if (output & BIT(DYTC_QUERY_ENABLE_BIT)) {
+		/* Only DYTC v5.0 and later has this feature. */
+		int dytc_version;
+
+		dytc_version = (output >> DYTC_QUERY_REV_BIT) & 0xF;
+		if (dytc_version >= 5) {
+			dbg_printk(TPACPI_DBG_INIT,
+				   "DYTC version %d: thermal mode available\n", dytc_version);
+			/* Create platform_profile structure and register */
+			err = platform_profile_register(&dytc_profile);
+			/*
+			 * If for some reason platform_profiles aren't enabled
+			 * don't quit terminally.
+			 */
+			if (err)
+				return 0;
+
+			dytc_profile_available = true;
+			/* Ensure initial values are correct */
+			dytc_profile_refresh();
+		}
+	}
+	return 0;
+}
+
+static void dytc_profile_exit(void)
+{
+	if (dytc_profile_available) {
+		dytc_profile_available = false;
+		platform_profile_remove();
+	}
+}
+
+static struct ibm_struct  dytc_profile_driver_data = {
+	.name = "dytc-profile",
+	.exit = dytc_profile_exit,
+};
+
+/*************************************************************************
+ * Keyboard language interface
+ */
+
+struct keyboard_lang_data {
+	const char *lang_str;
+	int lang_code;
+};
+
+static const struct keyboard_lang_data keyboard_lang_data[] = {
+	{"be", 0x080c},
+	{"cz", 0x0405},
+	{"da", 0x0406},
+	{"de", 0x0c07},
+	{"en", 0x0000},
+	{"es", 0x2c0a},
+	{"et", 0x0425},
+	{"fr", 0x040c},
+	{"fr-ch", 0x100c},
+	{"hu", 0x040e},
+	{"it", 0x0410},
+	{"jp", 0x0411},
+	{"nl", 0x0413},
+	{"nn", 0x0414},
+	{"pl", 0x0415},
+	{"pt", 0x0816},
+	{"sl", 0x041b},
+	{"sv", 0x081d},
+	{"tr", 0x041f},
+};
+
+static int set_keyboard_lang_command(int command)
+{
+	acpi_handle sskl_handle;
+	int output;
+
+	if (ACPI_FAILURE(acpi_get_handle(hkey_handle, "SSKL", &sskl_handle))) {
+		/* Platform doesn't support SSKL */
+		return -ENODEV;
+	}
+
+	if (!acpi_evalf(sskl_handle, &output, NULL, "dd", command))
+		return -EIO;
+
+	return 0;
+}
+
+static int get_keyboard_lang(int *output)
+{
+	acpi_handle gskl_handle;
+	int kbd_lang;
+
+	if (ACPI_FAILURE(acpi_get_handle(hkey_handle, "GSKL", &gskl_handle))) {
+		/* Platform doesn't support GSKL */
+		return -ENODEV;
+	}
+
+	if (!acpi_evalf(gskl_handle, &kbd_lang, NULL, "dd", 0x02000000))
+		return -EIO;
+
+	/*
+	 * METHOD_ERR gets returned on devices where there are no special (e.g. '=',
+	 * '(' and ')') keys which use layout dependent key-press emulation.
+	 */
+	if (kbd_lang & METHOD_ERR)
+		return -ENODEV;
+
+	*output = kbd_lang;
+
+	return 0;
+}
+
+/* sysfs keyboard language entry */
+static ssize_t keyboard_lang_show(struct device *dev,
+				struct device_attribute *attr,
+				char *buf)
+{
+	int output, err, i, len = 0;
+
+	err = get_keyboard_lang(&output);
+	if (err)
+		return err;
+
+	for (i = 0; i < ARRAY_SIZE(keyboard_lang_data); i++) {
+		if (i)
+			len += sysfs_emit_at(buf, len, "%s", " ");
+
+		if (output == keyboard_lang_data[i].lang_code) {
+			len += sysfs_emit_at(buf, len, "[%s]", keyboard_lang_data[i].lang_str);
+		} else {
+			len += sysfs_emit_at(buf, len, "%s", keyboard_lang_data[i].lang_str);
+		}
+	}
+	len += sysfs_emit_at(buf, len, "\n");
+
+	return len;
+}
+
+static ssize_t keyboard_lang_store(struct device *dev,
+				struct device_attribute *attr,
+				const char *buf, size_t count)
+{
+	int err, i;
+	bool lang_found = false;
+	int lang_code = 0;
+
+	for (i = 0; i < ARRAY_SIZE(keyboard_lang_data); i++) {
+		if (sysfs_streq(buf, keyboard_lang_data[i].lang_str)) {
+			lang_code = keyboard_lang_data[i].lang_code;
+			lang_found = true;
+			break;
+		}
+	}
+
+	if (lang_found) {
+		lang_code = lang_code | 1 << 24;
+
+		/* Set language code */
+		err = set_keyboard_lang_command(lang_code);
+		if (err)
+			return err;
+	} else {
+		dev_err(&tpacpi_pdev->dev, "Unknown Keyboard language. Ignoring\n");
+		return -EINVAL;
+	}
+
+	tpacpi_disclose_usertask(attr->attr.name,
+			"keyboard language is set to  %s\n", buf);
+
+	sysfs_notify(&tpacpi_pdev->dev.kobj, NULL, "keyboard_lang");
+
+	return count;
+}
+static DEVICE_ATTR_RW(keyboard_lang);
+
+static struct attribute *kbdlang_attributes[] = {
+	&dev_attr_keyboard_lang.attr,
+	NULL
+};
+
+static const struct attribute_group kbdlang_attr_group = {
+	.attrs = kbdlang_attributes,
+};
+
+static int tpacpi_kbdlang_init(struct ibm_init_struct *iibm)
+{
+	int err, output;
+
+	err = get_keyboard_lang(&output);
+	/*
+	 * If support isn't available (ENODEV) then don't return an error
+	 * just don't create the sysfs group.
+	 */
+	if (err == -ENODEV)
+		return 0;
+
+	if (err)
+		return err;
+
+	/* Platform supports this feature - create the sysfs file */
+	return sysfs_create_group(&tpacpi_pdev->dev.kobj, &kbdlang_attr_group);
+}
+
+static void kbdlang_exit(void)
+{
+	sysfs_remove_group(&tpacpi_pdev->dev.kobj, &kbdlang_attr_group);
+}
+
+static struct ibm_struct kbdlang_driver_data = {
+	.name = "kbdlang",
+	.exit = kbdlang_exit,
+};
+
 /****************************************************************************
  ****************************************************************************
  *
@@ -10031,8 +10471,12 @@ static void tpacpi_driver_event(const unsigned int hkey_event)
 		mutex_unlock(&kbdlight_mutex);
 	}
 
-	if (hkey_event == TP_HKEY_EV_THM_CSM_COMPLETED)
+	if (hkey_event == TP_HKEY_EV_THM_CSM_COMPLETED) {
 		lapsensor_refresh();
+		/* If we are already accessing DYTC then skip dytc update */
+		if (!atomic_add_unless(&dytc_ignore_event, -1, 0))
+			dytc_profile_refresh();
+	}
 }
 
 static void hotkey_driver_event(const unsigned int scancode)
@@ -10475,6 +10919,14 @@ static struct ibm_init_struct ibms_init[] __initdata = {
 		.init = tpacpi_proxsensor_init,
 		.data = &proxsensor_driver_data,
 	},
+	{
+		.init = tpacpi_dytc_profile_init,
+		.data = &dytc_profile_driver_data,
+	},
+	{
+		.init = tpacpi_kbdlang_init,
+		.data = &kbdlang_driver_data,
+	},
 };
 
 static int __init set_ibm_param(const char *val, const struct kernel_param *kp)
diff --git a/drivers/platform/x86/touchscreen_dmi.c b/drivers/platform/x86/touchscreen_dmi.c
index c4de932302d6..c44a6e8dceb8 100644
--- a/drivers/platform/x86/touchscreen_dmi.c
+++ b/drivers/platform/x86/touchscreen_dmi.c
@@ -382,6 +382,23 @@ static const struct ts_dmi_data jumper_ezpad_6_m4_data = {
 	.properties	= jumper_ezpad_6_m4_props,
 };
 
+static const struct property_entry jumper_ezpad_7_props[] = {
+	PROPERTY_ENTRY_U32("touchscreen-min-x", 4),
+	PROPERTY_ENTRY_U32("touchscreen-min-y", 10),
+	PROPERTY_ENTRY_U32("touchscreen-size-x", 2044),
+	PROPERTY_ENTRY_U32("touchscreen-size-y", 1526),
+	PROPERTY_ENTRY_BOOL("touchscreen-swapped-x-y"),
+	PROPERTY_ENTRY_STRING("firmware-name", "gsl3680-jumper-ezpad-7.fw"),
+	PROPERTY_ENTRY_U32("silead,max-fingers", 10),
+	PROPERTY_ENTRY_BOOL("silead,stuck-controller-bug"),
+	{ }
+};
+
+static const struct ts_dmi_data jumper_ezpad_7_data = {
+	.acpi_name	= "MSSL1680:00",
+	.properties	= jumper_ezpad_7_props,
+};
+
 static const struct property_entry jumper_ezpad_mini3_props[] = {
 	PROPERTY_ENTRY_U32("touchscreen-min-x", 23),
 	PROPERTY_ENTRY_U32("touchscreen-min-y", 16),
@@ -1035,6 +1052,16 @@ const struct dmi_system_id touchscreen_dmi_table[] = {
 		},
 	},
 	{
+		/* Jumper EZpad 7 */
+		.driver_data = (void *)&jumper_ezpad_7_data,
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Jumper"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "EZpad"),
+			/* Jumper12x.WJ2012.bsBKRCP05 with the version dropped */
+			DMI_MATCH(DMI_BIOS_VERSION, "Jumper12x.WJ2012.bsBKRCP"),
+		},
+	},
+	{
 		/* Jumper EZpad mini3 */
 		.driver_data = (void *)&jumper_ezpad_mini3_data,
 		.matches = {
diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig
index 6123f9f4fbc9..2a402c10f8f1 100644
--- a/drivers/rtc/Kconfig
+++ b/drivers/rtc/Kconfig
@@ -973,18 +973,6 @@ config RTC_DRV_ALPHA
 	  Direct support for the real-time clock found on every Alpha
 	  system, specifically MC146818 compatibles.  If in doubt, say Y.
 
-config RTC_DRV_VRTC
-	tristate "Virtual RTC for Intel MID platforms"
-	depends on X86_INTEL_MID
-	default y if X86_INTEL_MID
-
-	help
-	Say "yes" here to get direct support for the real time clock
-	found on Moorestown platforms. The VRTC is a emulated RTC that
-	derives its clock source from a real RTC in the PMIC. The MC146818
-	style programming interface is mostly conserved, but any
-	updates are done via IPC calls to the system controller FW.
-
 config RTC_DRV_DS1216
 	tristate "Dallas DS1216"
 	depends on SNI_RM
diff --git a/drivers/rtc/Makefile b/drivers/rtc/Makefile
index bb8f319b09fb..f8ac4f574522 100644
--- a/drivers/rtc/Makefile
+++ b/drivers/rtc/Makefile
@@ -174,7 +174,6 @@ obj-$(CONFIG_RTC_DRV_TWL4030)	+= rtc-twl.o
 obj-$(CONFIG_RTC_DRV_TX4939)	+= rtc-tx4939.o
 obj-$(CONFIG_RTC_DRV_V3020)	+= rtc-v3020.o
 obj-$(CONFIG_RTC_DRV_VR41XX)	+= rtc-vr41xx.o
-obj-$(CONFIG_RTC_DRV_VRTC)	+= rtc-mrst.o
 obj-$(CONFIG_RTC_DRV_VT8500)	+= rtc-vt8500.o
 obj-$(CONFIG_RTC_DRV_WILCO_EC)	+= rtc-wilco-ec.o
 obj-$(CONFIG_RTC_DRV_WM831X)	+= rtc-wm831x.o
diff --git a/drivers/rtc/rtc-mrst.c b/drivers/rtc/rtc-mrst.c
deleted file mode 100644
index 421b3b6071b6..000000000000
--- a/drivers/rtc/rtc-mrst.c
+++ /dev/null
@@ -1,521 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * rtc-mrst.c: Driver for Moorestown virtual RTC
- *
- * (C) Copyright 2009 Intel Corporation
- * Author: Jacob Pan (jacob.jun.pan@intel.com)
- *	   Feng Tang (feng.tang@intel.com)
- *
- * Note:
- * VRTC is emulated by system controller firmware, the real HW
- * RTC is located in the PMIC device. SCU FW shadows PMIC RTC
- * in a memory mapped IO space that is visible to the host IA
- * processor.
- *
- * This driver is based upon drivers/rtc/rtc-cmos.c
- */
-
-/*
- * Note:
- *  * vRTC only supports binary mode and 24H mode
- *  * vRTC only support PIE and AIE, no UIE, and its PIE only happens
- *    at 23:59:59pm everyday, no support for adjustable frequency
- *  * Alarm function is also limited to hr/min/sec.
- */
-
-#include <linux/mod_devicetable.h>
-#include <linux/platform_device.h>
-#include <linux/interrupt.h>
-#include <linux/spinlock.h>
-#include <linux/kernel.h>
-#include <linux/mc146818rtc.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/sfi.h>
-
-#include <asm/intel_scu_ipc.h>
-#include <asm/intel-mid.h>
-#include <asm/intel_mid_vrtc.h>
-
-struct mrst_rtc {
-	struct rtc_device	*rtc;
-	struct device		*dev;
-	int			irq;
-
-	u8			enabled_wake;
-	u8			suspend_ctrl;
-};
-
-static const char driver_name[] = "rtc_mrst";
-
-#define	RTC_IRQMASK	(RTC_PF | RTC_AF)
-
-static inline int is_intr(u8 rtc_intr)
-{
-	if (!(rtc_intr & RTC_IRQF))
-		return 0;
-	return rtc_intr & RTC_IRQMASK;
-}
-
-static inline unsigned char vrtc_is_updating(void)
-{
-	unsigned char uip;
-	unsigned long flags;
-
-	spin_lock_irqsave(&rtc_lock, flags);
-	uip = (vrtc_cmos_read(RTC_FREQ_SELECT) & RTC_UIP);
-	spin_unlock_irqrestore(&rtc_lock, flags);
-	return uip;
-}
-
-/*
- * rtc_time's year contains the increment over 1900, but vRTC's YEAR
- * register can't be programmed to value larger than 0x64, so vRTC
- * driver chose to use 1972 (1970 is UNIX time start point) as the base,
- * and does the translation at read/write time.
- *
- * Why not just use 1970 as the offset? it's because using 1972 will
- * make it consistent in leap year setting for both vrtc and low-level
- * physical rtc devices. Then why not use 1960 as the offset? If we use
- * 1960, for a device's first use, its YEAR register is 0 and the system
- * year will be parsed as 1960 which is not a valid UNIX time and will
- * cause many applications to fail mysteriously.
- */
-static int mrst_read_time(struct device *dev, struct rtc_time *time)
-{
-	unsigned long flags;
-
-	if (vrtc_is_updating())
-		msleep(20);
-
-	spin_lock_irqsave(&rtc_lock, flags);
-	time->tm_sec = vrtc_cmos_read(RTC_SECONDS);
-	time->tm_min = vrtc_cmos_read(RTC_MINUTES);
-	time->tm_hour = vrtc_cmos_read(RTC_HOURS);
-	time->tm_mday = vrtc_cmos_read(RTC_DAY_OF_MONTH);
-	time->tm_mon = vrtc_cmos_read(RTC_MONTH);
-	time->tm_year = vrtc_cmos_read(RTC_YEAR);
-	spin_unlock_irqrestore(&rtc_lock, flags);
-
-	/* Adjust for the 1972/1900 */
-	time->tm_year += 72;
-	time->tm_mon--;
-	return 0;
-}
-
-static int mrst_set_time(struct device *dev, struct rtc_time *time)
-{
-	int ret;
-	unsigned long flags;
-	unsigned char mon, day, hrs, min, sec;
-	unsigned int yrs;
-
-	yrs = time->tm_year;
-	mon = time->tm_mon + 1;   /* tm_mon starts at zero */
-	day = time->tm_mday;
-	hrs = time->tm_hour;
-	min = time->tm_min;
-	sec = time->tm_sec;
-
-	if (yrs < 72 || yrs > 172)
-		return -EINVAL;
-	yrs -= 72;
-
-	spin_lock_irqsave(&rtc_lock, flags);
-
-	vrtc_cmos_write(yrs, RTC_YEAR);
-	vrtc_cmos_write(mon, RTC_MONTH);
-	vrtc_cmos_write(day, RTC_DAY_OF_MONTH);
-	vrtc_cmos_write(hrs, RTC_HOURS);
-	vrtc_cmos_write(min, RTC_MINUTES);
-	vrtc_cmos_write(sec, RTC_SECONDS);
-
-	spin_unlock_irqrestore(&rtc_lock, flags);
-
-	ret = intel_scu_ipc_simple_command(IPCMSG_VRTC, IPC_CMD_VRTC_SETTIME);
-	return ret;
-}
-
-static int mrst_read_alarm(struct device *dev, struct rtc_wkalrm *t)
-{
-	struct mrst_rtc	*mrst = dev_get_drvdata(dev);
-	unsigned char rtc_control;
-
-	if (mrst->irq <= 0)
-		return -EIO;
-
-	/* vRTC only supports binary mode */
-	spin_lock_irq(&rtc_lock);
-	t->time.tm_sec = vrtc_cmos_read(RTC_SECONDS_ALARM);
-	t->time.tm_min = vrtc_cmos_read(RTC_MINUTES_ALARM);
-	t->time.tm_hour = vrtc_cmos_read(RTC_HOURS_ALARM);
-
-	rtc_control = vrtc_cmos_read(RTC_CONTROL);
-	spin_unlock_irq(&rtc_lock);
-
-	t->enabled = !!(rtc_control & RTC_AIE);
-	t->pending = 0;
-
-	return 0;
-}
-
-static void mrst_checkintr(struct mrst_rtc *mrst, unsigned char rtc_control)
-{
-	unsigned char	rtc_intr;
-
-	/*
-	 * NOTE after changing RTC_xIE bits we always read INTR_FLAGS;
-	 * allegedly some older rtcs need that to handle irqs properly
-	 */
-	rtc_intr = vrtc_cmos_read(RTC_INTR_FLAGS);
-	rtc_intr &= (rtc_control & RTC_IRQMASK) | RTC_IRQF;
-	if (is_intr(rtc_intr))
-		rtc_update_irq(mrst->rtc, 1, rtc_intr);
-}
-
-static void mrst_irq_enable(struct mrst_rtc *mrst, unsigned char mask)
-{
-	unsigned char	rtc_control;
-
-	/*
-	 * Flush any pending IRQ status, notably for update irqs,
-	 * before we enable new IRQs
-	 */
-	rtc_control = vrtc_cmos_read(RTC_CONTROL);
-	mrst_checkintr(mrst, rtc_control);
-
-	rtc_control |= mask;
-	vrtc_cmos_write(rtc_control, RTC_CONTROL);
-
-	mrst_checkintr(mrst, rtc_control);
-}
-
-static void mrst_irq_disable(struct mrst_rtc *mrst, unsigned char mask)
-{
-	unsigned char	rtc_control;
-
-	rtc_control = vrtc_cmos_read(RTC_CONTROL);
-	rtc_control &= ~mask;
-	vrtc_cmos_write(rtc_control, RTC_CONTROL);
-	mrst_checkintr(mrst, rtc_control);
-}
-
-static int mrst_set_alarm(struct device *dev, struct rtc_wkalrm *t)
-{
-	struct mrst_rtc	*mrst = dev_get_drvdata(dev);
-	unsigned char hrs, min, sec;
-	int ret = 0;
-
-	if (!mrst->irq)
-		return -EIO;
-
-	hrs = t->time.tm_hour;
-	min = t->time.tm_min;
-	sec = t->time.tm_sec;
-
-	spin_lock_irq(&rtc_lock);
-	/* Next rtc irq must not be from previous alarm setting */
-	mrst_irq_disable(mrst, RTC_AIE);
-
-	/* Update alarm */
-	vrtc_cmos_write(hrs, RTC_HOURS_ALARM);
-	vrtc_cmos_write(min, RTC_MINUTES_ALARM);
-	vrtc_cmos_write(sec, RTC_SECONDS_ALARM);
-
-	spin_unlock_irq(&rtc_lock);
-
-	ret = intel_scu_ipc_simple_command(IPCMSG_VRTC, IPC_CMD_VRTC_SETALARM);
-	if (ret)
-		return ret;
-
-	spin_lock_irq(&rtc_lock);
-	if (t->enabled)
-		mrst_irq_enable(mrst, RTC_AIE);
-
-	spin_unlock_irq(&rtc_lock);
-
-	return 0;
-}
-
-/* Currently, the vRTC doesn't support UIE ON/OFF */
-static int mrst_rtc_alarm_irq_enable(struct device *dev, unsigned int enabled)
-{
-	struct mrst_rtc	*mrst = dev_get_drvdata(dev);
-	unsigned long	flags;
-
-	spin_lock_irqsave(&rtc_lock, flags);
-	if (enabled)
-		mrst_irq_enable(mrst, RTC_AIE);
-	else
-		mrst_irq_disable(mrst, RTC_AIE);
-	spin_unlock_irqrestore(&rtc_lock, flags);
-	return 0;
-}
-
-
-#if IS_ENABLED(CONFIG_RTC_INTF_PROC)
-
-static int mrst_procfs(struct device *dev, struct seq_file *seq)
-{
-	unsigned char	rtc_control;
-
-	spin_lock_irq(&rtc_lock);
-	rtc_control = vrtc_cmos_read(RTC_CONTROL);
-	spin_unlock_irq(&rtc_lock);
-
-	seq_printf(seq,
-		   "periodic_IRQ\t: %s\n"
-		   "alarm\t\t: %s\n"
-		   "BCD\t\t: no\n"
-		   "periodic_freq\t: daily (not adjustable)\n",
-		   (rtc_control & RTC_PIE) ? "on" : "off",
-		   (rtc_control & RTC_AIE) ? "on" : "off");
-
-	return 0;
-}
-
-#else
-#define	mrst_procfs	NULL
-#endif
-
-static const struct rtc_class_ops mrst_rtc_ops = {
-	.read_time	= mrst_read_time,
-	.set_time	= mrst_set_time,
-	.read_alarm	= mrst_read_alarm,
-	.set_alarm	= mrst_set_alarm,
-	.proc		= mrst_procfs,
-	.alarm_irq_enable = mrst_rtc_alarm_irq_enable,
-};
-
-static struct mrst_rtc	mrst_rtc;
-
-/*
- * When vRTC IRQ is captured by SCU FW, FW will clear the AIE bit in
- * Reg B, so no need for this driver to clear it
- */
-static irqreturn_t mrst_rtc_irq(int irq, void *p)
-{
-	u8 irqstat;
-
-	spin_lock(&rtc_lock);
-	/* This read will clear all IRQ flags inside Reg C */
-	irqstat = vrtc_cmos_read(RTC_INTR_FLAGS);
-	spin_unlock(&rtc_lock);
-
-	irqstat &= RTC_IRQMASK | RTC_IRQF;
-	if (is_intr(irqstat)) {
-		rtc_update_irq(p, 1, irqstat);
-		return IRQ_HANDLED;
-	}
-	return IRQ_NONE;
-}
-
-static int vrtc_mrst_do_probe(struct device *dev, struct resource *iomem,
-			      int rtc_irq)
-{
-	int retval = 0;
-	unsigned char rtc_control;
-
-	/* There can be only one ... */
-	if (mrst_rtc.dev)
-		return -EBUSY;
-
-	if (!iomem)
-		return -ENODEV;
-
-	iomem = devm_request_mem_region(dev, iomem->start, resource_size(iomem),
-					driver_name);
-	if (!iomem) {
-		dev_dbg(dev, "i/o mem already in use.\n");
-		return -EBUSY;
-	}
-
-	mrst_rtc.irq = rtc_irq;
-	mrst_rtc.dev = dev;
-	dev_set_drvdata(dev, &mrst_rtc);
-
-	mrst_rtc.rtc = devm_rtc_allocate_device(dev);
-	if (IS_ERR(mrst_rtc.rtc))
-		return PTR_ERR(mrst_rtc.rtc);
-
-	mrst_rtc.rtc->ops = &mrst_rtc_ops;
-
-	rename_region(iomem, dev_name(&mrst_rtc.rtc->dev));
-
-	spin_lock_irq(&rtc_lock);
-	mrst_irq_disable(&mrst_rtc, RTC_PIE | RTC_AIE);
-	rtc_control = vrtc_cmos_read(RTC_CONTROL);
-	spin_unlock_irq(&rtc_lock);
-
-	if (!(rtc_control & RTC_24H) || (rtc_control & (RTC_DM_BINARY)))
-		dev_dbg(dev, "TODO: support more than 24-hr BCD mode\n");
-
-	if (rtc_irq) {
-		retval = devm_request_irq(dev, rtc_irq, mrst_rtc_irq,
-					  0, dev_name(&mrst_rtc.rtc->dev),
-					  mrst_rtc.rtc);
-		if (retval < 0) {
-			dev_dbg(dev, "IRQ %d is already in use, err %d\n",
-				rtc_irq, retval);
-			goto cleanup0;
-		}
-	}
-
-	retval = devm_rtc_register_device(mrst_rtc.rtc);
-	if (retval)
-		goto cleanup0;
-
-	dev_dbg(dev, "initialised\n");
-	return 0;
-
-cleanup0:
-	mrst_rtc.dev = NULL;
-	dev_err(dev, "rtc-mrst: unable to initialise\n");
-	return retval;
-}
-
-static void rtc_mrst_do_shutdown(void)
-{
-	spin_lock_irq(&rtc_lock);
-	mrst_irq_disable(&mrst_rtc, RTC_IRQMASK);
-	spin_unlock_irq(&rtc_lock);
-}
-
-static void rtc_mrst_do_remove(struct device *dev)
-{
-	struct mrst_rtc	*mrst = dev_get_drvdata(dev);
-
-	rtc_mrst_do_shutdown();
-
-	mrst->rtc = NULL;
-	mrst->dev = NULL;
-}
-
-#ifdef CONFIG_PM_SLEEP
-static int mrst_suspend(struct device *dev)
-{
-	struct mrst_rtc	*mrst = dev_get_drvdata(dev);
-	unsigned char	tmp;
-
-	/* Only the alarm might be a wakeup event source */
-	spin_lock_irq(&rtc_lock);
-	mrst->suspend_ctrl = tmp = vrtc_cmos_read(RTC_CONTROL);
-	if (tmp & (RTC_PIE | RTC_AIE)) {
-		unsigned char	mask;
-
-		if (device_may_wakeup(dev))
-			mask = RTC_IRQMASK & ~RTC_AIE;
-		else
-			mask = RTC_IRQMASK;
-		tmp &= ~mask;
-		vrtc_cmos_write(tmp, RTC_CONTROL);
-
-		mrst_checkintr(mrst, tmp);
-	}
-	spin_unlock_irq(&rtc_lock);
-
-	if (tmp & RTC_AIE) {
-		mrst->enabled_wake = 1;
-		enable_irq_wake(mrst->irq);
-	}
-
-	dev_dbg(&mrst_rtc.rtc->dev, "suspend%s, ctrl %02x\n",
-			(tmp & RTC_AIE) ? ", alarm may wake" : "",
-			tmp);
-
-	return 0;
-}
-
-/*
- * We want RTC alarms to wake us from the deep power saving state
- */
-static inline int mrst_poweroff(struct device *dev)
-{
-	return mrst_suspend(dev);
-}
-
-static int mrst_resume(struct device *dev)
-{
-	struct mrst_rtc	*mrst = dev_get_drvdata(dev);
-	unsigned char tmp = mrst->suspend_ctrl;
-
-	/* Re-enable any irqs previously active */
-	if (tmp & RTC_IRQMASK) {
-		unsigned char	mask;
-
-		if (mrst->enabled_wake) {
-			disable_irq_wake(mrst->irq);
-			mrst->enabled_wake = 0;
-		}
-
-		spin_lock_irq(&rtc_lock);
-		do {
-			vrtc_cmos_write(tmp, RTC_CONTROL);
-
-			mask = vrtc_cmos_read(RTC_INTR_FLAGS);
-			mask &= (tmp & RTC_IRQMASK) | RTC_IRQF;
-			if (!is_intr(mask))
-				break;
-
-			rtc_update_irq(mrst->rtc, 1, mask);
-			tmp &= ~RTC_AIE;
-		} while (mask & RTC_AIE);
-		spin_unlock_irq(&rtc_lock);
-	}
-
-	dev_dbg(&mrst_rtc.rtc->dev, "resume, ctrl %02x\n", tmp);
-
-	return 0;
-}
-
-static SIMPLE_DEV_PM_OPS(mrst_pm_ops, mrst_suspend, mrst_resume);
-#define MRST_PM_OPS (&mrst_pm_ops)
-
-#else
-#define MRST_PM_OPS NULL
-
-static inline int mrst_poweroff(struct device *dev)
-{
-	return -ENOSYS;
-}
-
-#endif
-
-static int vrtc_mrst_platform_probe(struct platform_device *pdev)
-{
-	return vrtc_mrst_do_probe(&pdev->dev,
-			platform_get_resource(pdev, IORESOURCE_MEM, 0),
-			platform_get_irq(pdev, 0));
-}
-
-static int vrtc_mrst_platform_remove(struct platform_device *pdev)
-{
-	rtc_mrst_do_remove(&pdev->dev);
-	return 0;
-}
-
-static void vrtc_mrst_platform_shutdown(struct platform_device *pdev)
-{
-	if (system_state == SYSTEM_POWER_OFF && !mrst_poweroff(&pdev->dev))
-		return;
-
-	rtc_mrst_do_shutdown();
-}
-
-MODULE_ALIAS("platform:vrtc_mrst");
-
-static struct platform_driver vrtc_mrst_platform_driver = {
-	.probe		= vrtc_mrst_platform_probe,
-	.remove		= vrtc_mrst_platform_remove,
-	.shutdown	= vrtc_mrst_platform_shutdown,
-	.driver = {
-		.name	= driver_name,
-		.pm	= MRST_PM_OPS,
-	}
-};
-
-module_platform_driver(vrtc_mrst_platform_driver);
-
-MODULE_AUTHOR("Jacob Pan; Feng Tang");
-MODULE_DESCRIPTION("Driver for Moorestown virtual RTC");
-MODULE_LICENSE("GPL");
diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
index 7ff941e71b79..6b9e93d8532b 100644
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -1219,15 +1219,6 @@ config IE6XX_WDT
 	  To compile this driver as a module, choose M here: the
 	  module will be called ie6xx_wdt.
 
-config INTEL_SCU_WATCHDOG
-	bool "Intel SCU Watchdog for Mobile Platforms"
-	depends on X86_INTEL_MID
-	help
-	  Hardware driver for the watchdog time built into the Intel SCU
-	  for Intel Mobile Platforms.
-
-	  To compile this driver as a module, choose M here.
-
 config INTEL_MID_WATCHDOG
 	tristate "Intel MID Watchdog Timer"
 	depends on X86_INTEL_MID
diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile
index 5c74ee19d441..74f61e4105d8 100644
--- a/drivers/watchdog/Makefile
+++ b/drivers/watchdog/Makefile
@@ -140,7 +140,6 @@ obj-$(CONFIG_W83877F_WDT) += w83877f_wdt.o
 obj-$(CONFIG_W83977F_WDT) += w83977f_wdt.o
 obj-$(CONFIG_MACHZ_WDT) += machzwd.o
 obj-$(CONFIG_SBC_EPX_C3_WATCHDOG) += sbc_epx_c3.o
-obj-$(CONFIG_INTEL_SCU_WATCHDOG) += intel_scu_watchdog.o
 obj-$(CONFIG_INTEL_MID_WATCHDOG) += intel-mid_wdt.o
 obj-$(CONFIG_INTEL_MEI_WDT) += mei_wdt.o
 obj-$(CONFIG_NI903X_WDT) += ni903x_wdt.o
diff --git a/drivers/watchdog/intel-mid_wdt.c b/drivers/watchdog/intel-mid_wdt.c
index 1ae03b64ef8b..9b2173f765c8 100644
--- a/drivers/watchdog/intel-mid_wdt.c
+++ b/drivers/watchdog/intel-mid_wdt.c
@@ -154,6 +154,10 @@ static int mid_wdt_probe(struct platform_device *pdev)
 	watchdog_set_nowayout(wdt_dev, WATCHDOG_NOWAYOUT);
 	watchdog_set_drvdata(wdt_dev, mid);
 
+	mid->scu = devm_intel_scu_ipc_dev_get(dev);
+	if (!mid->scu)
+		return -EPROBE_DEFER;
+
 	ret = devm_request_irq(dev, pdata->irq, mid_wdt_irq,
 			       IRQF_SHARED | IRQF_NO_SUSPEND, "watchdog",
 			       wdt_dev);
@@ -162,10 +166,6 @@ static int mid_wdt_probe(struct platform_device *pdev)
 		return ret;
 	}
 
-	mid->scu = devm_intel_scu_ipc_dev_get(dev);
-	if (!mid->scu)
-		return -EPROBE_DEFER;
-
 	/*
 	 * The firmware followed by U-Boot leaves the watchdog running
 	 * with the default threshold which may vary. When we get here
diff --git a/drivers/watchdog/intel_scu_watchdog.c b/drivers/watchdog/intel_scu_watchdog.c
deleted file mode 100644
index 804e35940983..000000000000
--- a/drivers/watchdog/intel_scu_watchdog.c
+++ /dev/null
@@ -1,533 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- *      Intel_SCU 0.2:  An Intel SCU IOH Based Watchdog Device
- *			for Intel part #(s):
- *				- AF82MP20 PCH
- *
- *      Copyright (C) 2009-2010 Intel Corporation. All rights reserved.
- */
-
-#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
-
-#include <linux/compiler.h>
-#include <linux/kernel.h>
-#include <linux/moduleparam.h>
-#include <linux/types.h>
-#include <linux/miscdevice.h>
-#include <linux/watchdog.h>
-#include <linux/fs.h>
-#include <linux/notifier.h>
-#include <linux/reboot.h>
-#include <linux/init.h>
-#include <linux/jiffies.h>
-#include <linux/uaccess.h>
-#include <linux/slab.h>
-#include <linux/io.h>
-#include <linux/interrupt.h>
-#include <linux/delay.h>
-#include <linux/sched.h>
-#include <linux/signal.h>
-#include <linux/sfi.h>
-#include <asm/irq.h>
-#include <linux/atomic.h>
-#include <asm/intel_scu_ipc.h>
-#include <asm/apb_timer.h>
-#include <asm/intel-mid.h>
-
-#include "intel_scu_watchdog.h"
-
-/* Bounds number of times we will retry loading time count */
-/* This retry is a work around for a silicon bug.	   */
-#define MAX_RETRY 16
-
-#define IPC_SET_WATCHDOG_TIMER	0xF8
-
-static int timer_margin = DEFAULT_SOFT_TO_HARD_MARGIN;
-module_param(timer_margin, int, 0);
-MODULE_PARM_DESC(timer_margin,
-		"Watchdog timer margin"
-		"Time between interrupt and resetting the system"
-		"The range is from 1 to 160"
-		"This is the time for all keep alives to arrive");
-
-static int timer_set = DEFAULT_TIME;
-module_param(timer_set, int, 0);
-MODULE_PARM_DESC(timer_set,
-		"Default Watchdog timer setting"
-		"Complete cycle time"
-		"The range is from 1 to 170"
-		"This is the time for all keep alives to arrive");
-
-/* After watchdog device is closed, check force_boot. If:
- * force_boot == 0, then force boot on next watchdog interrupt after close,
- * force_boot == 1, then force boot immediately when device is closed.
- */
-static int force_boot;
-module_param(force_boot, int, 0);
-MODULE_PARM_DESC(force_boot,
-		"A value of 1 means that the driver will reboot"
-		"the system immediately if the /dev/watchdog device is closed"
-		"A value of 0 means that when /dev/watchdog device is closed"
-		"the watchdog timer will be refreshed for one more interval"
-		"of length: timer_set. At the end of this interval, the"
-		"watchdog timer will reset the system."
-		);
-
-/* there is only one device in the system now; this can be made into
- * an array in the future if we have more than one device */
-
-static struct intel_scu_watchdog_dev watchdog_device;
-
-/* Forces restart, if force_reboot is set */
-static void watchdog_fire(void)
-{
-	if (force_boot) {
-		pr_crit("Initiating system reboot\n");
-		emergency_restart();
-		pr_crit("Reboot didn't ?????\n");
-	}
-
-	else {
-		pr_crit("Immediate Reboot Disabled\n");
-		pr_crit("System will reset when watchdog timer times out!\n");
-	}
-}
-
-static int check_timer_margin(int new_margin)
-{
-	if ((new_margin < MIN_TIME_CYCLE) ||
-	    (new_margin > MAX_TIME - timer_set)) {
-		pr_debug("value of new_margin %d is out of the range %d to %d\n",
-			 new_margin, MIN_TIME_CYCLE, MAX_TIME - timer_set);
-		return -EINVAL;
-	}
-	return 0;
-}
-
-/*
- * IPC operations
- */
-static int watchdog_set_ipc(int soft_threshold, int threshold)
-{
-	u32	*ipc_wbuf;
-	u8	 cbuf[16] = { '\0' };
-	int	 ipc_ret = 0;
-
-	ipc_wbuf = (u32 *)&cbuf;
-	ipc_wbuf[0] = soft_threshold;
-	ipc_wbuf[1] = threshold;
-
-	ipc_ret = intel_scu_ipc_command(
-			IPC_SET_WATCHDOG_TIMER,
-			0,
-			ipc_wbuf,
-			2,
-			NULL,
-			0);
-
-	if (ipc_ret != 0)
-		pr_err("Error setting SCU watchdog timer: %x\n", ipc_ret);
-
-	return ipc_ret;
-};
-
-/*
- *      Intel_SCU operations
- */
-
-/* timer interrupt handler */
-static irqreturn_t watchdog_timer_interrupt(int irq, void *dev_id)
-{
-	int int_status;
-	int_status = ioread32(watchdog_device.timer_interrupt_status_addr);
-
-	pr_debug("irq, int_status: %x\n", int_status);
-
-	if (int_status != 0)
-		return IRQ_NONE;
-
-	/* has the timer been started? If not, then this is spurious */
-	if (watchdog_device.timer_started == 0) {
-		pr_debug("spurious interrupt received\n");
-		return IRQ_HANDLED;
-	}
-
-	/* temporarily disable the timer */
-	iowrite32(0x00000002, watchdog_device.timer_control_addr);
-
-	/* set the timer to the threshold */
-	iowrite32(watchdog_device.threshold,
-		  watchdog_device.timer_load_count_addr);
-
-	/* allow the timer to run */
-	iowrite32(0x00000003, watchdog_device.timer_control_addr);
-
-	return IRQ_HANDLED;
-}
-
-static int intel_scu_keepalive(void)
-{
-
-	/* read eoi register - clears interrupt */
-	ioread32(watchdog_device.timer_clear_interrupt_addr);
-
-	/* temporarily disable the timer */
-	iowrite32(0x00000002, watchdog_device.timer_control_addr);
-
-	/* set the timer to the soft_threshold */
-	iowrite32(watchdog_device.soft_threshold,
-		  watchdog_device.timer_load_count_addr);
-
-	/* allow the timer to run */
-	iowrite32(0x00000003, watchdog_device.timer_control_addr);
-
-	return 0;
-}
-
-static int intel_scu_stop(void)
-{
-	iowrite32(0, watchdog_device.timer_control_addr);
-	return 0;
-}
-
-static int intel_scu_set_heartbeat(u32 t)
-{
-	int			 ipc_ret;
-	int			 retry_count;
-	u32			 soft_value;
-	u32			 hw_value;
-
-	watchdog_device.timer_set = t;
-	watchdog_device.threshold =
-		timer_margin * watchdog_device.timer_tbl_ptr->freq_hz;
-	watchdog_device.soft_threshold =
-		(watchdog_device.timer_set - timer_margin)
-		* watchdog_device.timer_tbl_ptr->freq_hz;
-
-	pr_debug("set_heartbeat: timer freq is %d\n",
-		 watchdog_device.timer_tbl_ptr->freq_hz);
-	pr_debug("set_heartbeat: timer_set is %x (hex)\n",
-		 watchdog_device.timer_set);
-	pr_debug("set_heartbeat: timer_margin is %x (hex)\n", timer_margin);
-	pr_debug("set_heartbeat: threshold is %x (hex)\n",
-		 watchdog_device.threshold);
-	pr_debug("set_heartbeat: soft_threshold is %x (hex)\n",
-		 watchdog_device.soft_threshold);
-
-	/* Adjust thresholds by FREQ_ADJUSTMENT factor, to make the */
-	/* watchdog timing come out right. */
-	watchdog_device.threshold =
-		watchdog_device.threshold / FREQ_ADJUSTMENT;
-	watchdog_device.soft_threshold =
-		watchdog_device.soft_threshold / FREQ_ADJUSTMENT;
-
-	/* temporarily disable the timer */
-	iowrite32(0x00000002, watchdog_device.timer_control_addr);
-
-	/* send the threshold and soft_threshold via IPC to the processor */
-	ipc_ret = watchdog_set_ipc(watchdog_device.soft_threshold,
-				   watchdog_device.threshold);
-
-	if (ipc_ret != 0) {
-		/* Make sure the watchdog timer is stopped */
-		intel_scu_stop();
-		return ipc_ret;
-	}
-
-	/* Soft Threshold set loop. Early versions of silicon did */
-	/* not always set this count correctly.  This loop checks */
-	/* the value and retries if it was not set correctly.     */
-
-	retry_count = 0;
-	soft_value = watchdog_device.soft_threshold & 0xFFFF0000;
-	do {
-
-		/* Make sure timer is stopped */
-		intel_scu_stop();
-
-		if (MAX_RETRY < retry_count++) {
-			/* Unable to set timer value */
-			pr_err("Unable to set timer\n");
-			return -ENODEV;
-		}
-
-		/* set the timer to the soft threshold */
-		iowrite32(watchdog_device.soft_threshold,
-			watchdog_device.timer_load_count_addr);
-
-		/* read count value before starting timer */
-		ioread32(watchdog_device.timer_load_count_addr);
-
-		/* Start the timer */
-		iowrite32(0x00000003, watchdog_device.timer_control_addr);
-
-		/* read the value the time loaded into its count reg */
-		hw_value = ioread32(watchdog_device.timer_load_count_addr);
-		hw_value = hw_value & 0xFFFF0000;
-
-
-	} while (soft_value != hw_value);
-
-	watchdog_device.timer_started = 1;
-
-	return 0;
-}
-
-/*
- * /dev/watchdog handling
- */
-
-static int intel_scu_open(struct inode *inode, struct file *file)
-{
-
-	/* Set flag to indicate that watchdog device is open */
-	if (test_and_set_bit(0, &watchdog_device.driver_open))
-		return -EBUSY;
-
-	/* Check for reopen of driver. Reopens are not allowed */
-	if (watchdog_device.driver_closed)
-		return -EPERM;
-
-	return stream_open(inode, file);
-}
-
-static int intel_scu_release(struct inode *inode, struct file *file)
-{
-	/*
-	 * This watchdog should not be closed, after the timer
-	 * is started with the WDIPC_SETTIMEOUT ioctl
-	 * If force_boot is set watchdog_fire() will cause an
-	 * immediate reset. If force_boot is not set, the watchdog
-	 * timer is refreshed for one more interval. At the end
-	 * of that interval, the watchdog timer will reset the system.
-	 */
-
-	if (!test_and_clear_bit(0, &watchdog_device.driver_open)) {
-		pr_debug("intel_scu_release, without open\n");
-		return -ENOTTY;
-	}
-
-	if (!watchdog_device.timer_started) {
-		/* Just close, since timer has not been started */
-		pr_debug("closed, without starting timer\n");
-		return 0;
-	}
-
-	pr_crit("Unexpected close of /dev/watchdog!\n");
-
-	/* Since the timer was started, prevent future reopens */
-	watchdog_device.driver_closed = 1;
-
-	/* Refresh the timer for one more interval */
-	intel_scu_keepalive();
-
-	/* Reboot system (if force_boot is set) */
-	watchdog_fire();
-
-	/* We should only reach this point if force_boot is not set */
-	return 0;
-}
-
-static ssize_t intel_scu_write(struct file *file,
-			      char const *data,
-			      size_t len,
-			      loff_t *ppos)
-{
-
-	if (watchdog_device.timer_started)
-		/* Watchdog already started, keep it alive */
-		intel_scu_keepalive();
-	else
-		/* Start watchdog with timer value set by init */
-		intel_scu_set_heartbeat(watchdog_device.timer_set);
-
-	return len;
-}
-
-static long intel_scu_ioctl(struct file *file,
-			   unsigned int cmd,
-			   unsigned long arg)
-{
-	void __user *argp = (void __user *)arg;
-	u32 __user *p = argp;
-	u32 new_margin;
-
-
-	static const struct watchdog_info ident = {
-		.options =          WDIOF_SETTIMEOUT
-				    | WDIOF_KEEPALIVEPING,
-		.firmware_version = 0,  /* @todo Get from SCU via
-						 ipc_get_scu_fw_version()? */
-		.identity =         "Intel_SCU IOH Watchdog"  /* len < 32 */
-	};
-
-	switch (cmd) {
-	case WDIOC_GETSUPPORT:
-		return copy_to_user(argp,
-				    &ident,
-				    sizeof(ident)) ? -EFAULT : 0;
-	case WDIOC_GETSTATUS:
-	case WDIOC_GETBOOTSTATUS:
-		return put_user(0, p);
-	case WDIOC_KEEPALIVE:
-		intel_scu_keepalive();
-
-		return 0;
-	case WDIOC_SETTIMEOUT:
-		if (get_user(new_margin, p))
-			return -EFAULT;
-
-		if (check_timer_margin(new_margin))
-			return -EINVAL;
-
-		if (intel_scu_set_heartbeat(new_margin))
-			return -EINVAL;
-		return 0;
-	case WDIOC_GETTIMEOUT:
-		return put_user(watchdog_device.soft_threshold, p);
-
-	default:
-		return -ENOTTY;
-	}
-}
-
-/*
- *      Notifier for system down
- */
-static int intel_scu_notify_sys(struct notifier_block *this,
-			       unsigned long code,
-			       void *another_unused)
-{
-	if (code == SYS_DOWN || code == SYS_HALT)
-		/* Turn off the watchdog timer. */
-		intel_scu_stop();
-	return NOTIFY_DONE;
-}
-
-/*
- *      Kernel Interfaces
- */
-static const struct file_operations intel_scu_fops = {
-	.owner          = THIS_MODULE,
-	.llseek         = no_llseek,
-	.write          = intel_scu_write,
-	.unlocked_ioctl = intel_scu_ioctl,
-	.compat_ioctl	= compat_ptr_ioctl,
-	.open           = intel_scu_open,
-	.release        = intel_scu_release,
-};
-
-static int __init intel_scu_watchdog_init(void)
-{
-	int ret;
-	u32 __iomem *tmp_addr;
-
-	/*
-	 * We don't really need to check this as the SFI timer get will fail
-	 * but if we do so we can exit with a clearer reason and no noise.
-	 *
-	 * If it isn't an intel MID device then it doesn't have this watchdog
-	 */
-	if (!intel_mid_identify_cpu())
-		return -ENODEV;
-
-	/* Check boot parameters to verify that their initial values */
-	/* are in range. */
-	/* Check value of timer_set boot parameter */
-	if ((timer_set < MIN_TIME_CYCLE) ||
-	    (timer_set > MAX_TIME - MIN_TIME_CYCLE)) {
-		pr_err("value of timer_set %x (hex) is out of range from %x to %x (hex)\n",
-		       timer_set, MIN_TIME_CYCLE, MAX_TIME - MIN_TIME_CYCLE);
-		return -EINVAL;
-	}
-
-	/* Check value of timer_margin boot parameter */
-	if (check_timer_margin(timer_margin))
-		return -EINVAL;
-
-	watchdog_device.timer_tbl_ptr = sfi_get_mtmr(sfi_mtimer_num-1);
-
-	if (watchdog_device.timer_tbl_ptr == NULL) {
-		pr_debug("timer is not available\n");
-		return -ENODEV;
-	}
-	/* make sure the timer exists */
-	if (watchdog_device.timer_tbl_ptr->phys_addr == 0) {
-		pr_debug("timer %d does not have valid physical memory\n",
-			 sfi_mtimer_num);
-		return -ENODEV;
-	}
-
-	if (watchdog_device.timer_tbl_ptr->irq == 0) {
-		pr_debug("timer %d invalid irq\n", sfi_mtimer_num);
-		return -ENODEV;
-	}
-
-	tmp_addr = ioremap(watchdog_device.timer_tbl_ptr->phys_addr,
-			20);
-
-	if (tmp_addr == NULL) {
-		pr_debug("timer unable to ioremap\n");
-		return -ENOMEM;
-	}
-
-	watchdog_device.timer_load_count_addr = tmp_addr++;
-	watchdog_device.timer_current_value_addr = tmp_addr++;
-	watchdog_device.timer_control_addr = tmp_addr++;
-	watchdog_device.timer_clear_interrupt_addr = tmp_addr++;
-	watchdog_device.timer_interrupt_status_addr = tmp_addr++;
-
-	/* Set the default time values in device structure */
-
-	watchdog_device.timer_set = timer_set;
-	watchdog_device.threshold =
-		timer_margin * watchdog_device.timer_tbl_ptr->freq_hz;
-	watchdog_device.soft_threshold =
-		(watchdog_device.timer_set - timer_margin)
-		* watchdog_device.timer_tbl_ptr->freq_hz;
-
-
-	watchdog_device.intel_scu_notifier.notifier_call =
-		intel_scu_notify_sys;
-
-	ret = register_reboot_notifier(&watchdog_device.intel_scu_notifier);
-	if (ret) {
-		pr_err("cannot register notifier %d)\n", ret);
-		goto register_reboot_error;
-	}
-
-	watchdog_device.miscdev.minor = WATCHDOG_MINOR;
-	watchdog_device.miscdev.name = "watchdog";
-	watchdog_device.miscdev.fops = &intel_scu_fops;
-
-	ret = misc_register(&watchdog_device.miscdev);
-	if (ret) {
-		pr_err("cannot register miscdev %d err =%d\n",
-		       WATCHDOG_MINOR, ret);
-		goto misc_register_error;
-	}
-
-	ret = request_irq((unsigned int)watchdog_device.timer_tbl_ptr->irq,
-		watchdog_timer_interrupt,
-		IRQF_SHARED, "watchdog",
-		&watchdog_device.timer_load_count_addr);
-	if (ret) {
-		pr_err("error requesting irq %d\n", ret);
-		goto request_irq_error;
-	}
-	/* Make sure timer is disabled before returning */
-	intel_scu_stop();
-	return 0;
-
-/* error cleanup */
-
-request_irq_error:
-	misc_deregister(&watchdog_device.miscdev);
-misc_register_error:
-	unregister_reboot_notifier(&watchdog_device.intel_scu_notifier);
-register_reboot_error:
-	intel_scu_stop();
-	iounmap(watchdog_device.timer_load_count_addr);
-	return ret;
-}
-late_initcall(intel_scu_watchdog_init);
diff --git a/drivers/watchdog/intel_scu_watchdog.h b/drivers/watchdog/intel_scu_watchdog.h
deleted file mode 100644
index fb12a25ee417..000000000000
--- a/drivers/watchdog/intel_scu_watchdog.h
+++ /dev/null
@@ -1,50 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- *      Intel_SCU 0.2:  An Intel SCU IOH Based Watchdog Device
- *			for Intel part #(s):
- *				- AF82MP20 PCH
- *
- *      Copyright (C) 2009-2010 Intel Corporation. All rights reserved.
- */
-
-#ifndef __INTEL_SCU_WATCHDOG_H
-#define __INTEL_SCU_WATCHDOG_H
-
-#define WDT_VER "0.3"
-
-/* minimum time between interrupts */
-#define MIN_TIME_CYCLE 1
-
-/* Time from warning to reboot is 2 seconds */
-#define DEFAULT_SOFT_TO_HARD_MARGIN 2
-
-#define MAX_TIME 170
-
-#define DEFAULT_TIME 5
-
-#define MAX_SOFT_TO_HARD_MARGIN (MAX_TIME-MIN_TIME_CYCLE)
-
-/* Ajustment to clock tick frequency to make timing come out right */
-#define FREQ_ADJUSTMENT 8
-
-struct intel_scu_watchdog_dev {
-	ulong driver_open;
-	ulong driver_closed;
-	u32 timer_started;
-	u32 timer_set;
-	u32 threshold;
-	u32 soft_threshold;
-	u32 __iomem *timer_load_count_addr;
-	u32 __iomem *timer_current_value_addr;
-	u32 __iomem *timer_control_addr;
-	u32 __iomem *timer_clear_interrupt_addr;
-	u32 __iomem *timer_interrupt_status_addr;
-	struct sfi_timer_table_entry *timer_tbl_ptr;
-	struct notifier_block intel_scu_notifier;
-	struct miscdevice miscdev;
-};
-
-extern int sfi_mtimer_num;
-
-/* extern struct sfi_timer_table_entry *sfi_get_mtmr(int hint); */
-#endif /* __INTEL_SCU_WATCHDOG_H */