Merge tag 'mmc-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc

Pull MMC updates from Ulf Hansson:
 "MMC core:
   - Extend slot-gpio to be used for host specific card detect interrupts
   - Align to common busy polling behaviour for mmc ioctls
   - Suggest the BFQ I/O scheduler to be built along with MMC/SD support
   - Add devm_mmc_alloc_host() to enable further cleanups in host drivers

  MMC host:
   - atmel-mci: Fix race condition when stopping/starting a command
   - dw_mmc-starfive: Add new driver to support the StarFive JH7110 variant
   - dw_mmc-rockchip: Add support for the RK3588 variant
   - jz4740: Add support for the vqmmc power supply
   - meson-gx: Convert the DT bindings to the dt-schema
   - meson-gx: Enable the platform interrupt to be used for card detect
   - moxart: Set the supported maximum request/block/segment sizes
   - renesas,sdhi: Add support for the RZ/V2M variants
   - sdhci: Rework code to drop SDHCI_QUIRK_MISSING_CAPS
   - sdhci-esdhc-imx: Improve tuning logic support
   - sdhci-msm: Add support for the IPQ5332 and the IPQ9574 variants
   - sdhci-of-dwcmshc: Add the missing device table IDs for acpi
   - sdhci-of-dwcmshc: Improve clock support for the Rockchip variant
   - sdhci-of-dwcmshc: Enable support of V4 host for the BlueField-3 variant
   - sdhci-pxav2: Add support for the PXA168 V1 variant
   - sdhci-pxav2: Add support for SDIO IRQs for the PXA168 V1 variant
   - uniphier-sd: Add support for SD UHS-I speed modes"

* tag 'mmc-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (59 commits)
  mmc: meson-gx: Use devm_platform_get_and_ioremap_resource()
  mmc: meson-gx: constify member data of struct meson_host
  mmc: meson-gx: use devm_clk_get_enabled() for core clock
  mmc: core: fix return value check in devm_mmc_alloc_host()
  dt-bindings: mmc: meson-gx: fix interrupt binding
  mmc: meson-gx: support platform interrupt as card detect interrupt
  dt-bindings: mmc: meson-gx: support specifying cd interrupt
  mmc: core: support setting card detect interrupt from drivers
  mmc: starfive: Add sdio/emmc driver support
  dt-bindings: mmc: Add StarFive MMC module
  dt-bindings: mmc: sdhci-msm: Allow 1 icc path
  dt-bindings: mmc: rockchip-dw-mshc: Add RK3588 compatible string
  mmc: core: Align to common busy polling behaviour for mmc ioctls
  dt-bindings: mmc: Add resets property to cadence SDHCI binding
  mmc: meson-gx: remove meson_mmc_get_cd
  mmc: moxart: set maximum request/block/segment sizes
  mmc: sdhci-brcmstb: Use devm_platform_get_and_ioremap_resource()
  mmc: sdhci-of-dwcmshc: add the missing device table IDs for acpi
  mmc: sdhci-of-dwcmshc: Update DLL and pre-change delay for rockchip platform
  mmc: jz4740: Add support for vqmmc power supply
  ...

27 files changed, 658 insertions, 140 deletions

diff --git a/drivers/memstick/core/Kconfig b/drivers/memstick/core/Kconfig
index 08192fd70eb4..50fa0711da9d 100644
--- a/drivers/memstick/core/Kconfig
+++ b/drivers/memstick/core/Kconfig
@@ -20,6 +20,7 @@ config MEMSTICK_UNSAFE_RESUME
 config MSPRO_BLOCK
 	tristate "MemoryStick Pro block device driver"
 	depends on BLOCK
+	imply IOSCHED_BFQ
 	help
 	  Say Y here to enable the MemoryStick Pro block device driver
 	  support. This provides a block device driver, which you can use
@@ -29,6 +30,7 @@ config MSPRO_BLOCK
 config MS_BLOCK
 	tristate "MemoryStick Standard device driver"
 	depends on BLOCK
+	imply IOSCHED_BFQ
 	help
 	  Say Y here to enable the MemoryStick Standard device driver
 	  support. This provides a block device driver, which you can use
diff --git a/drivers/mmc/core/Kconfig b/drivers/mmc/core/Kconfig
index 6f25c34e4fec..bf4e29ef023c 100644
--- a/drivers/mmc/core/Kconfig
+++ b/drivers/mmc/core/Kconfig
@@ -15,7 +15,7 @@ config PWRSEQ_EMMC
 
 config PWRSEQ_SD8787
 	tristate "HW reset support for SD8787 BT + Wifi module"
-	depends on OF && (MWIFIEX || BT_MRVL_SDIO || LIBERTAS_SDIO || WILC1000_SDIO)
+	depends on OF && (MWIFIEX != n || BT_MRVL_SDIO != n || LIBERTAS_SDIO != n || WILC1000_SDIO != n)
 	help
 	  This selects hardware reset support for the SD8787 BT + Wifi
 	  module. By default this option is set to n.
@@ -37,6 +37,7 @@ config PWRSEQ_SIMPLE
 config MMC_BLOCK
 	tristate "MMC block device driver"
 	depends on BLOCK
+	imply IOSCHED_BFQ
 	default y
 	help
 	  Say Y here to enable the MMC block device driver support.
diff --git a/drivers/mmc/core/block.c b/drivers/mmc/core/block.c
index 20da7ed43e6d..672ab90c4b2d 100644
--- a/drivers/mmc/core/block.c
+++ b/drivers/mmc/core/block.c
@@ -470,6 +470,8 @@ static int __mmc_blk_ioctl_cmd(struct mmc_card *card, struct mmc_blk_data *md,
 	struct mmc_data data = {};
 	struct mmc_request mrq = {};
 	struct scatterlist sg;
+	bool r1b_resp, use_r1b_resp = false;
+	unsigned int busy_timeout_ms;
 	int err;
 	unsigned int target_part;
 
@@ -545,6 +547,13 @@ static int __mmc_blk_ioctl_cmd(struct mmc_card *card, struct mmc_blk_data *md,
 	    (cmd.opcode == MMC_SWITCH))
 		return mmc_sanitize(card, idata->ic.cmd_timeout_ms);
 
+	/* If it's an R1B response we need some more preparations. */
+	busy_timeout_ms = idata->ic.cmd_timeout_ms ? : MMC_BLK_TIMEOUT_MS;
+	r1b_resp = (cmd.flags & MMC_RSP_R1B) == MMC_RSP_R1B;
+	if (r1b_resp)
+		use_r1b_resp = mmc_prepare_busy_cmd(card->host, &cmd,
+						    busy_timeout_ms);
+
 	mmc_wait_for_req(card->host, &mrq);
 	memcpy(&idata->ic.response, cmd.resp, sizeof(cmd.resp));
 
@@ -596,14 +605,14 @@ static int __mmc_blk_ioctl_cmd(struct mmc_card *card, struct mmc_blk_data *md,
 	if (idata->ic.postsleep_min_us)
 		usleep_range(idata->ic.postsleep_min_us, idata->ic.postsleep_max_us);
 
-	if (idata->rpmb || (cmd.flags & MMC_RSP_R1B) == MMC_RSP_R1B) {
-		/*
-		 * Ensure RPMB/R1B command has completed by polling CMD13 "Send Status". Here we
-		 * allow to override the default timeout value if a custom timeout is specified.
-		 */
-		err = mmc_poll_for_busy(card, idata->ic.cmd_timeout_ms ? : MMC_BLK_TIMEOUT_MS,
-					false, MMC_BUSY_IO);
-	}
+	/* No need to poll when using HW busy detection. */
+	if ((card->host->caps & MMC_CAP_WAIT_WHILE_BUSY) && use_r1b_resp)
+		return 0;
+
+	/* Ensure RPMB/R1B command has completed by polling with CMD13. */
+	if (idata->rpmb || r1b_resp)
+		err = mmc_poll_for_busy(card, busy_timeout_ms, false,
+					MMC_BUSY_IO);
 
 	return err;
 }
diff --git a/drivers/mmc/core/host.c b/drivers/mmc/core/host.c
index d17eda753b7e..096093f7be00 100644
--- a/drivers/mmc/core/host.c
+++ b/drivers/mmc/core/host.c
@@ -588,6 +588,32 @@ struct mmc_host *mmc_alloc_host(int extra, struct device *dev)
 
 EXPORT_SYMBOL(mmc_alloc_host);
 
+static void devm_mmc_host_release(struct device *dev, void *res)
+{
+	mmc_free_host(*(struct mmc_host **)res);
+}
+
+struct mmc_host *devm_mmc_alloc_host(struct device *dev, int extra)
+{
+	struct mmc_host **dr, *host;
+
+	dr = devres_alloc(devm_mmc_host_release, sizeof(*dr), GFP_KERNEL);
+	if (!dr)
+		return NULL;
+
+	host = mmc_alloc_host(extra, dev);
+	if (!host) {
+		devres_free(dr);
+		return NULL;
+	}
+
+	*dr = host;
+	devres_add(dev, dr);
+
+	return host;
+}
+EXPORT_SYMBOL(devm_mmc_alloc_host);
+
 static int mmc_validate_host_caps(struct mmc_host *host)
 {
 	struct device *dev = host->parent;
diff --git a/drivers/mmc/core/mmc_ops.c b/drivers/mmc/core/mmc_ops.c
index 81c55bfd6e0c..3b3adbddf664 100644
--- a/drivers/mmc/core/mmc_ops.c
+++ b/drivers/mmc/core/mmc_ops.c
@@ -575,6 +575,7 @@ bool mmc_prepare_busy_cmd(struct mmc_host *host, struct mmc_command *cmd,
 	cmd->busy_timeout = timeout_ms;
 	return true;
 }
+EXPORT_SYMBOL_GPL(mmc_prepare_busy_cmd);
 
 /**
  *	__mmc_switch - modify EXT_CSD register
diff --git a/drivers/mmc/core/pwrseq_simple.c b/drivers/mmc/core/pwrseq_simple.c
index 988467fbb621..3bac1e71411b 100644
--- a/drivers/mmc/core/pwrseq_simple.c
+++ b/drivers/mmc/core/pwrseq_simple.c
@@ -119,14 +119,14 @@ static int mmc_pwrseq_simple_probe(struct platform_device *pdev)
 
 	pwrseq->ext_clk = devm_clk_get(dev, "ext_clock");
 	if (IS_ERR(pwrseq->ext_clk) && PTR_ERR(pwrseq->ext_clk) != -ENOENT)
-		return PTR_ERR(pwrseq->ext_clk);
+		return dev_err_probe(dev, PTR_ERR(pwrseq->ext_clk), "external clock not ready\n");
 
 	pwrseq->reset_gpios = devm_gpiod_get_array(dev, "reset",
 							GPIOD_OUT_HIGH);
 	if (IS_ERR(pwrseq->reset_gpios) &&
 	    PTR_ERR(pwrseq->reset_gpios) != -ENOENT &&
 	    PTR_ERR(pwrseq->reset_gpios) != -ENOSYS) {
-		return PTR_ERR(pwrseq->reset_gpios);
+		return dev_err_probe(dev, PTR_ERR(pwrseq->reset_gpios), "reset GPIOs not ready\n");
 	}
 
 	device_property_read_u32(dev, "post-power-on-delay-ms",
diff --git a/drivers/mmc/core/sdio_io.c b/drivers/mmc/core/sdio_io.c
index 79dbf90216b5..b774bf51981d 100644
--- a/drivers/mmc/core/sdio_io.c
+++ b/drivers/mmc/core/sdio_io.c
@@ -766,7 +766,7 @@ EXPORT_SYMBOL_GPL(sdio_retune_crc_disable);
  *	sdio_retune_crc_enable - re-enable retuning on CRC errors
  *	@func: SDIO function attached to host
  *
- *	This is the compement to sdio_retune_crc_disable().
+ *	This is the complement to sdio_retune_crc_disable().
  */
 void sdio_retune_crc_enable(struct sdio_func *func)
 {
diff --git a/drivers/mmc/core/slot-gpio.c b/drivers/mmc/core/slot-gpio.c
index dd2a4b6ab6ad..2a2d949a9344 100644
--- a/drivers/mmc/core/slot-gpio.c
+++ b/drivers/mmc/core/slot-gpio.c
@@ -23,6 +23,7 @@ struct mmc_gpio {
 	char *ro_label;
 	char *cd_label;
 	u32 cd_debounce_delay_ms;
+	int cd_irq;
 };
 
 static irqreturn_t mmc_gpio_cd_irqt(int irq, void *dev_id)
@@ -53,12 +54,24 @@ int mmc_gpio_alloc(struct mmc_host *host)
 	ctx->ro_label = devm_kasprintf(host->parent, GFP_KERNEL, "%s ro", devname);
 	if (!ctx->ro_label)
 		return -ENOMEM;
+	ctx->cd_irq = -EINVAL;
 	host->slot.handler_priv = ctx;
 	host->slot.cd_irq = -EINVAL;
 
 	return 0;
 }
 
+void mmc_gpio_set_cd_irq(struct mmc_host *host, int irq)
+{
+	struct mmc_gpio *ctx = host->slot.handler_priv;
+
+	if (!ctx || irq < 0)
+		return;
+
+	ctx->cd_irq = irq;
+}
+EXPORT_SYMBOL(mmc_gpio_set_cd_irq);
+
 int mmc_gpio_get_ro(struct mmc_host *host)
 {
 	struct mmc_gpio *ctx = host->slot.handler_priv;
@@ -98,7 +111,9 @@ void mmc_gpiod_request_cd_irq(struct mmc_host *host)
 	 * Do not use IRQ if the platform prefers to poll, e.g., because that
 	 * IRQ number is already used by another unit and cannot be shared.
 	 */
-	if (!(host->caps & MMC_CAP_NEEDS_POLL))
+	if (ctx->cd_irq >= 0)
+		irq = ctx->cd_irq;
+	else if (!(host->caps & MMC_CAP_NEEDS_POLL))
 		irq = gpiod_to_irq(ctx->cd_gpio);
 
 	if (irq >= 0) {
diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
index e13b0b0b8ebb..4745fe217ade 100644
--- a/drivers/mmc/host/Kconfig
+++ b/drivers/mmc/host/Kconfig
@@ -348,6 +348,7 @@ config MMC_SDHCI_PXAV2
 	depends on MMC_SDHCI_PLTFM
 	depends on ARCH_MMP || COMPILE_TEST
 	default CPU_PXA910
+	select MMC_SDHCI_IO_ACCESSORS
 	help
 	  This selects the Marvell(R) PXAV2 SD Host Controller.
 	  If you have a PXA9XX platform with SD Host Controller
@@ -816,6 +817,16 @@ config MMC_DW_ROCKCHIP
 	  Synopsys DesignWare Memory Card Interface driver. Select this option
 	  for platforms based on RK3066, RK3188 and RK3288 SoC's.
 
+config MMC_DW_STARFIVE
+	tristate "StarFive specific extensions for Synopsys DW Memory Card Interface"
+	depends on SOC_STARFIVE
+	depends on MMC_DW
+	select MMC_DW_PLTFM
+	help
+	  This selects support for StarFive JH7110 SoC specific extensions to the
+	  Synopsys DesignWare Memory Card Interface driver. Select this option
+	  for platforms based on StarFive JH7110 SoC.
+
 config MMC_SH_MMCIF
 	tristate "SuperH Internal MMCIF support"
 	depends on SUPERH || ARCH_RENESAS || COMPILE_TEST
diff --git a/drivers/mmc/host/Makefile b/drivers/mmc/host/Makefile
index b498c17cd124..a693fa3d3f1c 100644
--- a/drivers/mmc/host/Makefile
+++ b/drivers/mmc/host/Makefile
@@ -54,6 +54,7 @@ obj-$(CONFIG_MMC_DW_HI3798CV200) += dw_mmc-hi3798cv200.o
 obj-$(CONFIG_MMC_DW_K3)		+= dw_mmc-k3.o
 obj-$(CONFIG_MMC_DW_PCI)	+= dw_mmc-pci.o
 obj-$(CONFIG_MMC_DW_ROCKCHIP)	+= dw_mmc-rockchip.o
+obj-$(CONFIG_MMC_DW_STARFIVE)	+= dw_mmc-starfive.o
 obj-$(CONFIG_MMC_SH_MMCIF)	+= sh_mmcif.o
 obj-$(CONFIG_MMC_JZ4740)	+= jz4740_mmc.o
 obj-$(CONFIG_MMC_VUB300)	+= vub300.o
diff --git a/drivers/mmc/host/atmel-mci.c b/drivers/mmc/host/atmel-mci.c
index bb9bbf1c927b..dd18440a90c5 100644
--- a/drivers/mmc/host/atmel-mci.c
+++ b/drivers/mmc/host/atmel-mci.c
@@ -1817,7 +1817,6 @@ static void atmci_tasklet_func(struct tasklet_struct *t)
 				atmci_writel(host, ATMCI_IER, ATMCI_NOTBUSY);
 				state = STATE_WAITING_NOTBUSY;
 			} else if (host->mrq->stop) {
-				atmci_writel(host, ATMCI_IER, ATMCI_CMDRDY);
 				atmci_send_stop_cmd(host, data);
 				state = STATE_SENDING_STOP;
 			} else {
@@ -1850,8 +1849,6 @@ static void atmci_tasklet_func(struct tasklet_struct *t)
 				 * command to send.
 				 */
 				if (host->mrq->stop) {
-					atmci_writel(host, ATMCI_IER,
-					             ATMCI_CMDRDY);
 					atmci_send_stop_cmd(host, data);
 					state = STATE_SENDING_STOP;
 				} else {
diff --git a/drivers/mmc/host/dw_mmc-starfive.c b/drivers/mmc/host/dw_mmc-starfive.c
new file mode 100644
index 000000000000..40f5969b07a6
--- /dev/null
+++ b/drivers/mmc/host/dw_mmc-starfive.c
@@ -0,0 +1,186 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * StarFive Designware Mobile Storage Host Controller Driver
+ *
+ * Copyright (c) 2022 StarFive Technology Co., Ltd.
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/mfd/syscon.h>
+#include <linux/mmc/host.h>
+#include <linux/module.h>
+#include <linux/of_address.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+
+#include "dw_mmc.h"
+#include "dw_mmc-pltfm.h"
+
+#define ALL_INT_CLR		0x1ffff
+#define MAX_DELAY_CHAIN		32
+
+struct starfive_priv {
+	struct device *dev;
+	struct regmap *reg_syscon;
+	u32 syscon_offset;
+	u32 syscon_shift;
+	u32 syscon_mask;
+};
+
+static void dw_mci_starfive_set_ios(struct dw_mci *host, struct mmc_ios *ios)
+{
+	int ret;
+	unsigned int clock;
+
+	if (ios->timing == MMC_TIMING_MMC_DDR52 || ios->timing == MMC_TIMING_UHS_DDR50) {
+		clock = (ios->clock > 50000000 && ios->clock <= 52000000) ? 100000000 : ios->clock;
+		ret = clk_set_rate(host->ciu_clk, clock);
+		if (ret)
+			dev_dbg(host->dev, "Use an external frequency divider %uHz\n", ios->clock);
+		host->bus_hz = clk_get_rate(host->ciu_clk);
+	} else {
+		dev_dbg(host->dev, "Using the internal divider\n");
+	}
+}
+
+static int dw_mci_starfive_execute_tuning(struct dw_mci_slot *slot,
+					     u32 opcode)
+{
+	static const int grade  = MAX_DELAY_CHAIN;
+	struct dw_mci *host = slot->host;
+	struct starfive_priv *priv = host->priv;
+	int rise_point = -1, fall_point = -1;
+	int err, prev_err;
+	int i;
+	bool found = 0;
+	u32 regval;
+
+	/*
+	 * Use grade as the max delay chain, and use the rise_point and
+	 * fall_point to ensure the best sampling point of a data input
+	 * signals.
+	 */
+	for (i = 0; i < grade; i++) {
+		regval = i << priv->syscon_shift;
+		err = regmap_update_bits(priv->reg_syscon, priv->syscon_offset,
+						priv->syscon_mask, regval);
+		if (err)
+			return err;
+		mci_writel(host, RINTSTS, ALL_INT_CLR);
+
+		err = mmc_send_tuning(slot->mmc, opcode, NULL);
+		if (!err)
+			found = 1;
+
+		if (i > 0) {
+			if (err && !prev_err)
+				fall_point = i - 1;
+			if (!err && prev_err)
+				rise_point = i;
+		}
+
+		if (rise_point != -1 && fall_point != -1)
+			goto tuning_out;
+
+		prev_err = err;
+		err = 0;
+	}
+
+tuning_out:
+	if (found) {
+		if (rise_point == -1)
+			rise_point = 0;
+		if (fall_point == -1)
+			fall_point = grade - 1;
+		if (fall_point < rise_point) {
+			if ((rise_point + fall_point) >
+			    (grade - 1))
+				i = fall_point / 2;
+			else
+				i = (rise_point + grade - 1) / 2;
+		} else {
+			i = (rise_point + fall_point) / 2;
+		}
+
+		regval = i << priv->syscon_shift;
+		err = regmap_update_bits(priv->reg_syscon, priv->syscon_offset,
+						priv->syscon_mask, regval);
+		if (err)
+			return err;
+		mci_writel(host, RINTSTS, ALL_INT_CLR);
+
+		dev_info(host->dev, "Found valid delay chain! use it [delay=%d]\n", i);
+	} else {
+		dev_err(host->dev, "No valid delay chain! use default\n");
+		err = -EINVAL;
+	}
+
+	mci_writel(host, RINTSTS, ALL_INT_CLR);
+	return err;
+}
+
+static int dw_mci_starfive_parse_dt(struct dw_mci *host)
+{
+	struct of_phandle_args args;
+	struct starfive_priv *priv;
+	int ret;
+
+	priv = devm_kzalloc(host->dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	ret = of_parse_phandle_with_fixed_args(host->dev->of_node,
+						"starfive,sysreg", 3, 0, &args);
+	if (ret) {
+		dev_err(host->dev, "Failed to parse starfive,sysreg\n");
+		return -EINVAL;
+	}
+
+	priv->reg_syscon = syscon_node_to_regmap(args.np);
+	of_node_put(args.np);
+	if (IS_ERR(priv->reg_syscon))
+		return PTR_ERR(priv->reg_syscon);
+
+	priv->syscon_offset = args.args[0];
+	priv->syscon_shift  = args.args[1];
+	priv->syscon_mask   = args.args[2];
+
+	host->priv = priv;
+
+	return 0;
+}
+
+static const struct dw_mci_drv_data starfive_data = {
+	.common_caps		= MMC_CAP_CMD23,
+	.set_ios		= dw_mci_starfive_set_ios,
+	.parse_dt		= dw_mci_starfive_parse_dt,
+	.execute_tuning		= dw_mci_starfive_execute_tuning,
+};
+
+static const struct of_device_id dw_mci_starfive_match[] = {
+	{ .compatible = "starfive,jh7110-mmc",
+		.data = &starfive_data },
+	{},
+};
+MODULE_DEVICE_TABLE(of, dw_mci_starfive_match);
+
+static int dw_mci_starfive_probe(struct platform_device *pdev)
+{
+	return dw_mci_pltfm_register(pdev, &starfive_data);
+}
+
+static struct platform_driver dw_mci_starfive_driver = {
+	.probe = dw_mci_starfive_probe,
+	.remove = dw_mci_pltfm_remove,
+	.driver = {
+		.name = "dwmmc_starfive",
+		.probe_type = PROBE_PREFER_ASYNCHRONOUS,
+		.of_match_table = dw_mci_starfive_match,
+	},
+};
+module_platform_driver(dw_mci_starfive_driver);
+
+MODULE_DESCRIPTION("StarFive JH7110 Specific DW-MSHC Driver Extension");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:dwmmc_starfive");
diff --git a/drivers/mmc/host/jz4740_mmc.c b/drivers/mmc/host/jz4740_mmc.c
index eda1e2ddcaca..698450afa7bb 100644
--- a/drivers/mmc/host/jz4740_mmc.c
+++ b/drivers/mmc/host/jz4740_mmc.c
@@ -21,6 +21,7 @@
 #include <linux/of_device.h>
 #include <linux/pinctrl/consumer.h>
 #include <linux/platform_device.h>
+#include <linux/regulator/consumer.h>
 #include <linux/scatterlist.h>
 
 #include <asm/cacheflush.h>
@@ -158,6 +159,8 @@ struct jz4740_mmc_host {
 	struct mmc_request *req;
 	struct mmc_command *cmd;
 
+	bool vqmmc_enabled;
+
 	unsigned long waiting;
 
 	uint32_t cmdat;
@@ -935,6 +938,8 @@ static void jz4740_mmc_request(struct mmc_host *mmc, struct mmc_request *req)
 static void jz4740_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
 {
 	struct jz4740_mmc_host *host = mmc_priv(mmc);
+	int ret;
+
 	if (ios->clock)
 		jz4740_mmc_set_clock_rate(host, ios->clock);
 
@@ -947,12 +952,25 @@ static void jz4740_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
 		clk_prepare_enable(host->clk);
 		break;
 	case MMC_POWER_ON:
+		if (!IS_ERR(mmc->supply.vqmmc) && !host->vqmmc_enabled) {
+			ret = regulator_enable(mmc->supply.vqmmc);
+			if (ret)
+				dev_err(&host->pdev->dev, "Failed to set vqmmc power!\n");
+			else
+				host->vqmmc_enabled = true;
+		}
 		break;
-	default:
+	case MMC_POWER_OFF:
 		if (!IS_ERR(mmc->supply.vmmc))
 			mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, 0);
+		if (!IS_ERR(mmc->supply.vqmmc) && host->vqmmc_enabled) {
+			regulator_disable(mmc->supply.vqmmc);
+			host->vqmmc_enabled = false;
+		}
 		clk_disable_unprepare(host->clk);
 		break;
+	default:
+		break;
 	}
 
 	switch (ios->bus_width) {
@@ -978,6 +996,23 @@ static void jz4740_mmc_enable_sdio_irq(struct mmc_host *mmc, int enable)
 	jz4740_mmc_set_irq_enabled(host, JZ_MMC_IRQ_SDIO, enable);
 }
 
+static int jz4740_voltage_switch(struct mmc_host *mmc, struct mmc_ios *ios)
+{
+	int ret;
+
+	/* vqmmc regulator is available */
+	if (!IS_ERR(mmc->supply.vqmmc)) {
+		ret = mmc_regulator_set_vqmmc(mmc, ios);
+		return ret < 0 ? ret : 0;
+	}
+
+	/* no vqmmc regulator, assume fixed regulator at 3/3.3V */
+	if (ios->signal_voltage == MMC_SIGNAL_VOLTAGE_330)
+		return 0;
+
+	return -EINVAL;
+}
+
 static const struct mmc_host_ops jz4740_mmc_ops = {
 	.request	= jz4740_mmc_request,
 	.pre_req	= jz4740_mmc_pre_request,
@@ -986,6 +1021,7 @@ static const struct mmc_host_ops jz4740_mmc_ops = {
 	.get_ro		= mmc_gpio_get_ro,
 	.get_cd		= mmc_gpio_get_cd,
 	.enable_sdio_irq = jz4740_mmc_enable_sdio_irq,
+	.start_signal_voltage_switch = jz4740_voltage_switch,
 };
 
 static const struct of_device_id jz4740_mmc_of_match[] = {
diff --git a/drivers/mmc/host/meson-gx-mmc.c b/drivers/mmc/host/meson-gx-mmc.c
index 5c94ad4661ce..2b963a81c2ad 100644
--- a/drivers/mmc/host/meson-gx-mmc.c
+++ b/drivers/mmc/host/meson-gx-mmc.c
@@ -150,12 +150,11 @@ struct sd_emmc_desc {
 
 struct meson_host {
 	struct	device		*dev;
-	struct	meson_mmc_data *data;
+	const struct meson_mmc_data *data;
 	struct	mmc_host	*mmc;
 	struct	mmc_command	*cmd;
 
 	void __iomem *regs;
-	struct clk *core_clk;
 	struct clk *mux_clk;
 	struct clk *mmc_clk;
 	unsigned long req_rate;
@@ -1083,20 +1082,6 @@ static irqreturn_t meson_mmc_irq_thread(int irq, void *dev_id)
 	return IRQ_HANDLED;
 }
 
-/*
- * NOTE: we only need this until the GPIO/pinctrl driver can handle
- * interrupts.  For now, the MMC core will use this for polling.
- */
-static int meson_mmc_get_cd(struct mmc_host *mmc)
-{
-	int status = mmc_gpio_get_cd(mmc);
-
-	if (status == -ENOSYS)
-		return 1; /* assume present */
-
-	return status;
-}
-
 static void meson_mmc_cfg_init(struct meson_host *host)
 {
 	u32 cfg = 0;
@@ -1165,7 +1150,7 @@ static void meson_mmc_ack_sdio_irq(struct mmc_host *mmc)
 static const struct mmc_host_ops meson_mmc_ops = {
 	.request	= meson_mmc_request,
 	.set_ios	= meson_mmc_set_ios,
-	.get_cd         = meson_mmc_get_cd,
+	.get_cd         = mmc_gpio_get_cd,
 	.pre_req	= meson_mmc_pre_req,
 	.post_req	= meson_mmc_post_req,
 	.execute_tuning = meson_mmc_resampling_tuning,
@@ -1180,9 +1165,10 @@ static int meson_mmc_probe(struct platform_device *pdev)
 	struct resource *res;
 	struct meson_host *host;
 	struct mmc_host *mmc;
-	int ret;
+	struct clk *core_clk;
+	int cd_irq, ret;
 
-	mmc = mmc_alloc_host(sizeof(struct meson_host), &pdev->dev);
+	mmc = devm_mmc_alloc_host(&pdev->dev, sizeof(struct meson_host));
 	if (!mmc)
 		return -ENOMEM;
 	host = mmc_priv(mmc);
@@ -1198,51 +1184,39 @@ static int meson_mmc_probe(struct platform_device *pdev)
 	host->vqmmc_enabled = false;
 	ret = mmc_regulator_get_supply(mmc);
 	if (ret)
-		goto free_host;
+		return ret;
 
 	ret = mmc_of_parse(mmc);
-	if (ret) {
-		if (ret != -EPROBE_DEFER)
-			dev_warn(&pdev->dev, "error parsing DT: %d\n", ret);
-		goto free_host;
-	}
+	if (ret)
+		return dev_err_probe(&pdev->dev, ret, "error parsing DT\n");
 
 	mmc->caps |= MMC_CAP_CMD23;
 
 	if (mmc->caps & MMC_CAP_SDIO_IRQ)
 		mmc->caps2 |= MMC_CAP2_SDIO_IRQ_NOTHREAD;
 
-	host->data = (struct meson_mmc_data *)
-		of_device_get_match_data(&pdev->dev);
-	if (!host->data) {
-		ret = -EINVAL;
-		goto free_host;
-	}
+	host->data = of_device_get_match_data(&pdev->dev);
+	if (!host->data)
+		return -EINVAL;
 
 	ret = device_reset_optional(&pdev->dev);
-	if (ret) {
-		dev_err_probe(&pdev->dev, ret, "device reset failed\n");
-		goto free_host;
-	}
+	if (ret)
+		return dev_err_probe(&pdev->dev, ret, "device reset failed\n");
 
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	host->regs = devm_ioremap_resource(&pdev->dev, res);
-	if (IS_ERR(host->regs)) {
-		ret = PTR_ERR(host->regs);
-		goto free_host;
-	}
+	host->regs = devm_platform_get_and_ioremap_resource(pdev, 0, &res);
+	if (IS_ERR(host->regs))
+		return PTR_ERR(host->regs);
 
 	host->irq = platform_get_irq(pdev, 0);
-	if (host->irq <= 0) {
-		ret = -EINVAL;
-		goto free_host;
-	}
+	if (host->irq <= 0)
+		return -EINVAL;
+
+	cd_irq = platform_get_irq_optional(pdev, 1);
+	mmc_gpio_set_cd_irq(mmc, cd_irq);
 
 	host->pinctrl = devm_pinctrl_get(&pdev->dev);
-	if (IS_ERR(host->pinctrl)) {
-		ret = PTR_ERR(host->pinctrl);
-		goto free_host;
-	}
+	if (IS_ERR(host->pinctrl))
+		return PTR_ERR(host->pinctrl);
 
 	host->pins_clk_gate = pinctrl_lookup_state(host->pinctrl,
 						   "clk-gate");
@@ -1252,19 +1226,13 @@ static int meson_mmc_probe(struct platform_device *pdev)
 		host->pins_clk_gate = NULL;
 	}
 
-	host->core_clk = devm_clk_get(&pdev->dev, "core");
-	if (IS_ERR(host->core_clk)) {
-		ret = PTR_ERR(host->core_clk);
-		goto free_host;
-	}
-
-	ret = clk_prepare_enable(host->core_clk);
-	if (ret)
-		goto free_host;
+	core_clk = devm_clk_get_enabled(&pdev->dev, "core");
+	if (IS_ERR(core_clk))
+		return PTR_ERR(core_clk);
 
 	ret = meson_mmc_clk_init(host);
 	if (ret)
-		goto err_core_clk;
+		return ret;
 
 	/* set config to sane default */
 	meson_mmc_cfg_init(host);
@@ -1348,10 +1316,6 @@ err_free_irq:
 	free_irq(host->irq, host);
 err_init_clk:
 	clk_disable_unprepare(host->mmc_clk);
-err_core_clk:
-	clk_disable_unprepare(host->core_clk);
-free_host:
-	mmc_free_host(mmc);
 	return ret;
 }
 
@@ -1366,9 +1330,7 @@ static int meson_mmc_remove(struct platform_device *pdev)
 	free_irq(host->irq, host);
 
 	clk_disable_unprepare(host->mmc_clk);
-	clk_disable_unprepare(host->core_clk);
 
-	mmc_free_host(host->mmc);
 	return 0;
 }
 
diff --git a/drivers/mmc/host/moxart-mmc.c b/drivers/mmc/host/moxart-mmc.c
index 52ed30f2d9f4..2d002c81dcf3 100644
--- a/drivers/mmc/host/moxart-mmc.c
+++ b/drivers/mmc/host/moxart-mmc.c
@@ -611,6 +611,9 @@ static int moxart_probe(struct platform_device *pdev)
 	mmc->f_max = DIV_ROUND_CLOSEST(host->sysclk, 2);
 	mmc->f_min = DIV_ROUND_CLOSEST(host->sysclk, CLK_DIV_MASK * 2);
 	mmc->ocr_avail = 0xffff00;	/* Support 2.0v - 3.6v power. */
+	mmc->max_blk_size = 2048; /* Max. block length in REG_DATA_CONTROL */
+	mmc->max_req_size = DATA_LEN_MASK; /* bits 0-23 in REG_DATA_LENGTH */
+	mmc->max_blk_count = mmc->max_req_size / 512;
 
 	if (IS_ERR(host->dma_chan_tx) || IS_ERR(host->dma_chan_rx)) {
 		if (PTR_ERR(host->dma_chan_tx) == -EPROBE_DEFER ||
@@ -628,6 +631,8 @@ static int moxart_probe(struct platform_device *pdev)
 		}
 		dev_dbg(dev, "PIO mode transfer enabled\n");
 		host->have_dma = false;
+
+		mmc->max_seg_size = mmc->max_req_size;
 	} else {
 		dev_dbg(dev, "DMA channels found (%p,%p)\n",
 			 host->dma_chan_tx, host->dma_chan_rx);
@@ -646,6 +651,10 @@ static int moxart_probe(struct platform_device *pdev)
 		cfg.src_addr = host->reg_phys + REG_DATA_WINDOW;
 		cfg.dst_addr = 0;
 		dmaengine_slave_config(host->dma_chan_rx, &cfg);
+
+		mmc->max_seg_size = min3(mmc->max_req_size,
+			dma_get_max_seg_size(host->dma_chan_rx->device->dev),
+			dma_get_max_seg_size(host->dma_chan_tx->device->dev));
 	}
 
 	if (readl(host->base + REG_BUS_WIDTH) & BUS_WIDTH_4_SUPPORT)
diff --git a/drivers/mmc/host/renesas_sdhi_internal_dmac.c b/drivers/mmc/host/renesas_sdhi_internal_dmac.c
index 29f562115c66..f38003f6b1ca 100644
--- a/drivers/mmc/host/renesas_sdhi_internal_dmac.c
+++ b/drivers/mmc/host/renesas_sdhi_internal_dmac.c
@@ -210,6 +210,11 @@ static const struct renesas_sdhi_quirks sdhi_quirks_r8a77990 = {
 	.manual_tap_correction = true,
 };
 
+static const struct renesas_sdhi_quirks sdhi_quirks_r9a09g011 = {
+	.fixed_addr_mode = true,
+	.hs400_disabled = true,
+};
+
 /*
  * Note for r8a7796 / r8a774a1: we can't distinguish ES1.1 and 1.2 as of now.
  * So, we want to treat them equally and only have a match for ES1.2 to enforce
@@ -251,6 +256,11 @@ static const struct renesas_sdhi_of_data_with_quirks of_r8a77990_compatible = {
 	.quirks = &sdhi_quirks_r8a77990,
 };
 
+static const struct renesas_sdhi_of_data_with_quirks of_r9a09g011_compatible = {
+	.of_data = &of_data_rcar_gen3,
+	.quirks = &sdhi_quirks_r9a09g011,
+};
+
 static const struct renesas_sdhi_of_data_with_quirks of_rcar_gen3_compatible = {
 	.of_data = &of_data_rcar_gen3,
 };
@@ -274,6 +284,7 @@ static const struct of_device_id renesas_sdhi_internal_dmac_of_match[] = {
 	{ .compatible = "renesas,sdhi-r8a77970", .data = &of_r8a77970_compatible, },
 	{ .compatible = "renesas,sdhi-r8a77990", .data = &of_r8a77990_compatible, },
 	{ .compatible = "renesas,sdhi-r8a77995", .data = &of_rcar_gen3_nohs400_compatible, },
+	{ .compatible = "renesas,sdhi-r9a09g011", .data = &of_r9a09g011_compatible, },
 	{ .compatible = "renesas,rcar-gen3-sdhi", .data = &of_rcar_gen3_compatible, },
 	{ .compatible = "renesas,rcar-gen4-sdhi", .data = &of_rcar_gen3_compatible, },
 	{},
diff --git a/drivers/mmc/host/sdhci-brcmstb.c b/drivers/mmc/host/sdhci-brcmstb.c
index f2cf3d70db79..4c22337199cf 100644
--- a/drivers/mmc/host/sdhci-brcmstb.c
+++ b/drivers/mmc/host/sdhci-brcmstb.c
@@ -255,7 +255,6 @@ static int sdhci_brcmstb_probe(struct platform_device *pdev)
 	struct sdhci_brcmstb_priv *priv;
 	u32 actual_clock_mhz;
 	struct sdhci_host *host;
-	struct resource *iomem;
 	struct clk *clk;
 	struct clk *base_clk = NULL;
 	int res;
@@ -291,8 +290,7 @@ static int sdhci_brcmstb_probe(struct platform_device *pdev)
 	}
 
 	/* Map in the non-standard CFG registers */
-	iomem = platform_get_resource(pdev, IORESOURCE_MEM, 1);
-	priv->cfg_regs = devm_ioremap_resource(&pdev->dev, iomem);
+	priv->cfg_regs = devm_platform_get_and_ioremap_resource(pdev, 1, NULL);
 	if (IS_ERR(priv->cfg_regs)) {
 		res = PTR_ERR(priv->cfg_regs);
 		goto err;
@@ -324,13 +322,11 @@ static int sdhci_brcmstb_probe(struct platform_device *pdev)
 	 * will allow these modes to be specified by device tree
 	 * properties through mmc_of_parse().
 	 */
-	host->caps = sdhci_readl(host, SDHCI_CAPABILITIES);
+	sdhci_read_caps(host);
 	if (match_priv->flags & BRCMSTB_MATCH_FLAGS_NO_64BIT)
 		host->caps &= ~SDHCI_CAN_64BIT;
-	host->caps1 = sdhci_readl(host, SDHCI_CAPABILITIES_1);
 	host->caps1 &= ~(SDHCI_SUPPORT_SDR50 | SDHCI_SUPPORT_SDR104 |
 			 SDHCI_SUPPORT_DDR50);
-	host->quirks |= SDHCI_QUIRK_MISSING_CAPS;
 
 	if (match_priv->flags & BRCMSTB_MATCH_FLAGS_BROKEN_TIMEOUT)
 		host->quirks |= SDHCI_QUIRK_BROKEN_TIMEOUT_VAL;
diff --git a/drivers/mmc/host/sdhci-esdhc-imx.c b/drivers/mmc/host/sdhci-esdhc-imx.c
index 9e73c34b6401..58f042fdd4f4 100644
--- a/drivers/mmc/host/sdhci-esdhc-imx.c
+++ b/drivers/mmc/host/sdhci-esdhc-imx.c
@@ -338,6 +338,16 @@ struct pltfm_imx_data {
 	struct clk *clk_ahb;
 	struct clk *clk_per;
 	unsigned int actual_clock;
+
+	/*
+	 * USDHC has one limition, require the SDIO device a different
+	 * register setting. Driver has to recognize card type during
+	 * the card init, but at this stage, mmc_host->card is not
+	 * available. So involve this field to save the card type
+	 * during card init through usdhc_init_card().
+	 */
+	unsigned int init_card_type;
+
 	enum {
 		NO_CMD_PENDING,      /* no multiblock command pending */
 		MULTIBLK_IN_PROCESS, /* exact multiblock cmd in process */
@@ -430,9 +440,12 @@ static inline void esdhc_wait_for_card_clock_gate_off(struct sdhci_host *host)
 }
 
 /* Enable the auto tuning circuit to check the CMD line and BUS line */
-static inline void usdhc_auto_tuning_mode_sel(struct sdhci_host *host)
+static inline void usdhc_auto_tuning_mode_sel_and_en(struct sdhci_host *host)
 {
+	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+	struct pltfm_imx_data *imx_data = sdhci_pltfm_priv(pltfm_host);
 	u32 buswidth, auto_tune_buswidth;
+	u32 reg;
 
 	buswidth = USDHC_GET_BUSWIDTH(readl(host->ioaddr + SDHCI_HOST_CONTROL));
 
@@ -448,9 +461,27 @@ static inline void usdhc_auto_tuning_mode_sel(struct sdhci_host *host)
 		break;
 	}
 
+	/*
+	 * For USDHC, auto tuning circuit can not handle the async sdio
+	 * device interrupt correctly. When sdio device use 4 data lines,
+	 * async sdio interrupt will use the shared DAT[1], if enable auto
+	 * tuning circuit check these 4 data lines, include the DAT[1],
+	 * this circuit will detect this interrupt, take this as a data on
+	 * DAT[1], and adjust the delay cell wrongly.
+	 * This is the hardware design limitation, to avoid this, for sdio
+	 * device, config the auto tuning circuit only check DAT[0] and CMD
+	 * line.
+	 */
+	if (imx_data->init_card_type == MMC_TYPE_SDIO)
+		auto_tune_buswidth = ESDHC_VEND_SPEC2_AUTO_TUNE_1BIT_EN;
+
 	esdhc_clrset_le(host, ESDHC_VEND_SPEC2_AUTO_TUNE_MODE_MASK,
 			auto_tune_buswidth | ESDHC_VEND_SPEC2_AUTO_TUNE_CMD_EN,
 			ESDHC_VEND_SPEC2);
+
+	reg = readl(host->ioaddr + ESDHC_MIX_CTRL);
+	reg |= ESDHC_MIX_CTRL_AUTO_TUNE_EN;
+	writel(reg, host->ioaddr + ESDHC_MIX_CTRL);
 }
 
 static u32 esdhc_readl_le(struct sdhci_host *host, int reg)
@@ -682,14 +713,11 @@ static void esdhc_writew_le(struct sdhci_host *host, u16 val, int reg)
 			} else {
 				v &= ~ESDHC_MIX_CTRL_SMPCLK_SEL;
 				m &= ~ESDHC_MIX_CTRL_FBCLK_SEL;
-				m &= ~ESDHC_MIX_CTRL_AUTO_TUNE_EN;
 			}
 
 			if (val & SDHCI_CTRL_EXEC_TUNING) {
 				v |= ESDHC_MIX_CTRL_EXE_TUNE;
 				m |= ESDHC_MIX_CTRL_FBCLK_SEL;
-				m |= ESDHC_MIX_CTRL_AUTO_TUNE_EN;
-				usdhc_auto_tuning_mode_sel(host);
 			} else {
 				v &= ~ESDHC_MIX_CTRL_EXE_TUNE;
 			}
@@ -1023,13 +1051,15 @@ static void esdhc_reset_tuning(struct sdhci_host *host)
 
 	/* Reset the tuning circuit */
 	if (esdhc_is_usdhc(imx_data)) {
+		ctrl = readl(host->ioaddr + ESDHC_MIX_CTRL);
+		ctrl &= ~ESDHC_MIX_CTRL_AUTO_TUNE_EN;
 		if (imx_data->socdata->flags & ESDHC_FLAG_MAN_TUNING) {
-			ctrl = readl(host->ioaddr + ESDHC_MIX_CTRL);
 			ctrl &= ~ESDHC_MIX_CTRL_SMPCLK_SEL;
 			ctrl &= ~ESDHC_MIX_CTRL_FBCLK_SEL;
 			writel(ctrl, host->ioaddr + ESDHC_MIX_CTRL);
 			writel(0, host->ioaddr + ESDHC_TUNE_CTRL_STATUS);
 		} else if (imx_data->socdata->flags & ESDHC_FLAG_STD_TUNING) {
+			writel(ctrl, host->ioaddr + ESDHC_MIX_CTRL);
 			ctrl = readl(host->ioaddr + SDHCI_AUTO_CMD_STATUS);
 			ctrl &= ~ESDHC_MIX_CTRL_SMPCLK_SEL;
 			ctrl &= ~ESDHC_MIX_CTRL_EXE_TUNE;
@@ -1052,9 +1082,19 @@ static void esdhc_reset_tuning(struct sdhci_host *host)
 	}
 }
 
+static void usdhc_init_card(struct mmc_host *mmc, struct mmc_card *card)
+{
+	struct sdhci_host *host = mmc_priv(mmc);
+	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+	struct pltfm_imx_data *imx_data = sdhci_pltfm_priv(pltfm_host);
+
+	imx_data->init_card_type = card->type;
+}
+
 static int usdhc_execute_tuning(struct mmc_host *mmc, u32 opcode)
 {
 	struct sdhci_host *host = mmc_priv(mmc);
+	int err;
 
 	/*
 	 * i.MX uSDHC internally already uses a fixed optimized timing for
@@ -1069,7 +1109,12 @@ static int usdhc_execute_tuning(struct mmc_host *mmc, u32 opcode)
 	 * correct delay cell.
 	 */
 	esdhc_reset_tuning(host);
-	return sdhci_execute_tuning(mmc, opcode);
+	err = sdhci_execute_tuning(mmc, opcode);
+	/* If tuning done, enable auto tuning */
+	if (!err && !host->tuning_err)
+		usdhc_auto_tuning_mode_sel_and_en(host);
+
+	return err;
 }
 
 static void esdhc_prepare_tuning(struct sdhci_host *host, u32 val)
@@ -1103,11 +1148,8 @@ static void esdhc_post_tuning(struct sdhci_host *host)
 {
 	u32 reg;
 
-	usdhc_auto_tuning_mode_sel(host);
-
 	reg = readl(host->ioaddr + ESDHC_MIX_CTRL);
 	reg &= ~ESDHC_MIX_CTRL_EXE_TUNE;
-	reg |= ESDHC_MIX_CTRL_AUTO_TUNE_EN;
 	writel(reg, host->ioaddr + ESDHC_MIX_CTRL);
 }
 
@@ -1674,6 +1716,12 @@ static int sdhci_esdhc_imx_probe(struct platform_device *pdev)
 		 * to replace the standard one in sdhci_ops.
 		 */
 		host->mmc_host_ops.execute_tuning = usdhc_execute_tuning;
+
+		/*
+		 * Link usdhc specific mmc_host_ops init card function,
+		 * to distinguish the card type.
+		 */
+		host->mmc_host_ops.init_card = usdhc_init_card;
 	}
 
 	err = sdhci_esdhc_imx_probe_dt(pdev, host, imx_data);
diff --git a/drivers/mmc/host/sdhci-iproc.c b/drivers/mmc/host/sdhci-iproc.c
index 6db35b1b8557..86eb0045515e 100644
--- a/drivers/mmc/host/sdhci-iproc.c
+++ b/drivers/mmc/host/sdhci-iproc.c
@@ -18,6 +18,7 @@ struct sdhci_iproc_data {
 	u32 caps;
 	u32 caps1;
 	u32 mmc_caps;
+	bool missing_caps;
 };
 
 struct sdhci_iproc_host {
@@ -251,7 +252,6 @@ static const struct sdhci_iproc_data iproc_data = {
 static const struct sdhci_pltfm_data sdhci_bcm2835_pltfm_data = {
 	.quirks = SDHCI_QUIRK_BROKEN_CARD_DETECTION |
 		  SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK |
-		  SDHCI_QUIRK_MISSING_CAPS |
 		  SDHCI_QUIRK_NO_HISPD_BIT,
 	.quirks2 = SDHCI_QUIRK2_PRESET_VALUE_BROKEN,
 	.ops = &sdhci_iproc_32only_ops,
@@ -266,6 +266,7 @@ static const struct sdhci_iproc_data bcm2835_data = {
 	.caps1 = SDHCI_DRIVER_TYPE_A |
 		 SDHCI_DRIVER_TYPE_C,
 	.mmc_caps = 0x00000000,
+	.missing_caps = true,
 };
 
 static const struct sdhci_ops sdhci_iproc_bcm2711_ops = {
@@ -295,8 +296,7 @@ static const struct sdhci_iproc_data bcm2711_data = {
 };
 
 static const struct sdhci_pltfm_data sdhci_bcm7211a0_pltfm_data = {
-	.quirks = SDHCI_QUIRK_MISSING_CAPS |
-		SDHCI_QUIRK_BROKEN_TIMEOUT_VAL |
+	.quirks = SDHCI_QUIRK_BROKEN_TIMEOUT_VAL |
 		SDHCI_QUIRK_BROKEN_DMA |
 		SDHCI_QUIRK_BROKEN_ADMA,
 	.ops = &sdhci_iproc_ops,
@@ -315,6 +315,7 @@ static const struct sdhci_iproc_data bcm7211a0_data = {
 		SDHCI_CAN_DO_HISPD,
 	.caps1 = SDHCI_DRIVER_TYPE_C |
 		 SDHCI_DRIVER_TYPE_D,
+	.missing_caps = true,
 };
 
 static const struct of_device_id sdhci_iproc_of_match[] = {
@@ -397,9 +398,10 @@ static int sdhci_iproc_probe(struct platform_device *pdev)
 		}
 	}
 
-	if (iproc_host->data->pdata->quirks & SDHCI_QUIRK_MISSING_CAPS) {
-		host->caps = iproc_host->data->caps;
-		host->caps1 = iproc_host->data->caps1;
+	if (iproc_host->data->missing_caps) {
+		__sdhci_read_caps(host, NULL,
+				  &iproc_host->data->caps,
+				  &iproc_host->data->caps1);
 	}
 
 	ret = sdhci_add_host(host);
diff --git a/drivers/mmc/host/sdhci-of-dwcmshc.c b/drivers/mmc/host/sdhci-of-dwcmshc.c
index a7343d4bc50e..d1490469184b 100644
--- a/drivers/mmc/host/sdhci-of-dwcmshc.c
+++ b/drivers/mmc/host/sdhci-of-dwcmshc.c
@@ -48,6 +48,7 @@
 #define DWCMSHC_EMMC_DLL_RXCLK_SRCSEL	29
 #define DWCMSHC_EMMC_DLL_START_POINT	16
 #define DWCMSHC_EMMC_DLL_INC		8
+#define DWCMSHC_EMMC_DLL_BYPASS		BIT(24)
 #define DWCMSHC_EMMC_DLL_DLYENA		BIT(27)
 #define DLL_TXCLK_TAPNUM_DEFAULT	0x10
 #define DLL_TXCLK_TAPNUM_90_DEGREES	0xA
@@ -60,6 +61,7 @@
 #define DLL_RXCLK_NO_INVERTER		1
 #define DLL_RXCLK_INVERTER		0
 #define DLL_CMDOUT_TAPNUM_90_DEGREES	0x8
+#define DLL_RXCLK_ORI_GATE		BIT(31)
 #define DLL_CMDOUT_TAPNUM_FROM_SW	BIT(24)
 #define DLL_CMDOUT_SRC_CLK_NEG		BIT(28)
 #define DLL_CMDOUT_EN_SRC_CLK_NEG	BIT(29)
@@ -234,9 +236,12 @@ static void dwcmshc_rk3568_set_clock(struct sdhci_host *host, unsigned int clock
 	sdhci_writel(host, extra, reg);
 
 	if (clock <= 52000000) {
-		/* Disable DLL and reset both of sample and drive clock */
-		sdhci_writel(host, 0, DWCMSHC_EMMC_DLL_CTRL);
-		sdhci_writel(host, 0, DWCMSHC_EMMC_DLL_RXCLK);
+		/*
+		 * Disable DLL and reset both of sample and drive clock.
+		 * The bypass bit and start bit need to be set if DLL is not locked.
+		 */
+		sdhci_writel(host, DWCMSHC_EMMC_DLL_BYPASS | DWCMSHC_EMMC_DLL_START, DWCMSHC_EMMC_DLL_CTRL);
+		sdhci_writel(host, DLL_RXCLK_ORI_GATE, DWCMSHC_EMMC_DLL_RXCLK);
 		sdhci_writel(host, 0, DWCMSHC_EMMC_DLL_TXCLK);
 		sdhci_writel(host, 0, DECMSHC_EMMC_DLL_CMDOUT);
 		/*
@@ -279,7 +284,7 @@ static void dwcmshc_rk3568_set_clock(struct sdhci_host *host, unsigned int clock
 	}
 
 	extra = 0x1 << 16 | /* tune clock stop en */
-		0x2 << 17 | /* pre-change delay */
+		0x3 << 17 | /* pre-change delay */
 		0x3 << 19;  /* post-change delay */
 	sdhci_writel(host, extra, dwc_priv->vendor_specific_area1 + DWCMSHC_EMMC_ATCTRL);
 
@@ -446,6 +451,7 @@ static const struct acpi_device_id sdhci_dwcmshc_acpi_ids[] = {
 	},
 	{}
 };
+MODULE_DEVICE_TABLE(acpi, sdhci_dwcmshc_acpi_ids);
 #endif
 
 static int dwcmshc_probe(struct platform_device *pdev)
@@ -528,6 +534,11 @@ static int dwcmshc_probe(struct platform_device *pdev)
 			goto err_clk;
 	}
 
+#ifdef CONFIG_ACPI
+	if (pltfm_data == &sdhci_dwcmshc_bf3_pdata)
+		sdhci_enable_v4_mode(host);
+#endif
+
 	host->mmc->caps |= MMC_CAP_WAIT_WHILE_BUSY;
 
 	err = sdhci_setup_host(host);
diff --git a/drivers/mmc/host/sdhci-pci-core.c b/drivers/mmc/host/sdhci-pci-core.c
index c359f867df0a..01975d145200 100644
--- a/drivers/mmc/host/sdhci-pci-core.c
+++ b/drivers/mmc/host/sdhci-pci-core.c
@@ -251,13 +251,16 @@ static int ricoh_probe(struct sdhci_pci_chip *chip)
 
 static int ricoh_mmc_probe_slot(struct sdhci_pci_slot *slot)
 {
-	slot->host->caps =
+	u32 caps =
 		FIELD_PREP(SDHCI_TIMEOUT_CLK_MASK, 0x21) |
 		FIELD_PREP(SDHCI_CLOCK_BASE_MASK, 0x21) |
 		SDHCI_TIMEOUT_CLK_UNIT |
 		SDHCI_CAN_VDD_330 |
 		SDHCI_CAN_DO_HISPD |
 		SDHCI_CAN_DO_SDMA;
+	u32 caps1 = 0;
+
+	__sdhci_read_caps(slot->host, NULL, &caps, &caps1);
 	return 0;
 }
 
@@ -286,8 +289,7 @@ static const struct sdhci_pci_fixes sdhci_ricoh_mmc = {
 #endif
 	.quirks		= SDHCI_QUIRK_32BIT_DMA_ADDR |
 			  SDHCI_QUIRK_CLOCK_BEFORE_RESET |
-			  SDHCI_QUIRK_NO_CARD_NO_RESET |
-			  SDHCI_QUIRK_MISSING_CAPS
+			  SDHCI_QUIRK_NO_CARD_NO_RESET,
 };
 
 static void ene_714_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
diff --git a/drivers/mmc/host/sdhci-pxav2.c b/drivers/mmc/host/sdhci-pxav2.c
index f18906b5575f..fc306eb1f845 100644
--- a/drivers/mmc/host/sdhci-pxav2.c
+++ b/drivers/mmc/host/sdhci-pxav2.c
@@ -20,6 +20,9 @@
 #include <linux/slab.h>
 #include <linux/of.h>
 #include <linux/of_device.h>
+#include <linux/mmc/sdio.h>
+#include <linux/mmc/mmc.h>
+#include <linux/pinctrl/consumer.h>
 
 #include "sdhci.h"
 #include "sdhci-pltfm.h"
@@ -41,6 +44,13 @@
 #define MMC_CARD		0x1000
 #define MMC_WIDTH		0x0100
 
+struct sdhci_pxav2_host {
+	struct mmc_request *sdio_mrq;
+	struct pinctrl *pinctrl;
+	struct pinctrl_state *pins_default;
+	struct pinctrl_state *pins_cmd_gpio;
+};
+
 static void pxav2_reset(struct sdhci_host *host, u8 mask)
 {
 	struct platform_device *pdev = to_platform_device(mmc_dev(host->mmc));
@@ -80,6 +90,71 @@ static void pxav2_reset(struct sdhci_host *host, u8 mask)
 	}
 }
 
+static u16 pxav1_readw(struct sdhci_host *host, int reg)
+{
+	/* Workaround for data abort exception on SDH2 and SDH4 on PXA168 */
+	if (reg == SDHCI_HOST_VERSION)
+		return readl(host->ioaddr + SDHCI_HOST_VERSION - 2) >> 16;
+
+	return readw(host->ioaddr + reg);
+}
+
+static u32 pxav1_irq(struct sdhci_host *host, u32 intmask)
+{
+	struct sdhci_pxav2_host *pxav2_host = sdhci_pltfm_priv(sdhci_priv(host));
+	struct mmc_request *sdio_mrq;
+
+	if (pxav2_host->sdio_mrq && (intmask & SDHCI_INT_CMD_MASK)) {
+		/* The dummy CMD0 for the SDIO workaround just completed */
+		sdhci_writel(host, intmask & SDHCI_INT_CMD_MASK, SDHCI_INT_STATUS);
+		intmask &= ~SDHCI_INT_CMD_MASK;
+
+		/* Restore MMC function to CMD pin */
+		if (pxav2_host->pinctrl && pxav2_host->pins_default)
+			pinctrl_select_state(pxav2_host->pinctrl, pxav2_host->pins_default);
+
+		sdio_mrq = pxav2_host->sdio_mrq;
+		pxav2_host->sdio_mrq = NULL;
+		mmc_request_done(host->mmc, sdio_mrq);
+	}
+
+	return intmask;
+}
+
+static void pxav1_request_done(struct sdhci_host *host, struct mmc_request *mrq)
+{
+	u16 tmp;
+	struct sdhci_pxav2_host *pxav2_host;
+
+	/* If this is an SDIO command, perform errata workaround for silicon bug */
+	if (mrq->cmd && !mrq->cmd->error &&
+	    (mrq->cmd->opcode == SD_IO_RW_DIRECT ||
+	     mrq->cmd->opcode == SD_IO_RW_EXTENDED)) {
+		/* Reset data port */
+		tmp = readw(host->ioaddr + SDHCI_TIMEOUT_CONTROL);
+		tmp |= 0x400;
+		writew(tmp, host->ioaddr + SDHCI_TIMEOUT_CONTROL);
+
+		/* Clock is now stopped, so restart it by sending a dummy CMD0 */
+		pxav2_host = sdhci_pltfm_priv(sdhci_priv(host));
+		pxav2_host->sdio_mrq = mrq;
+
+		/* Set CMD as high output rather than MMC function while we do CMD0 */
+		if (pxav2_host->pinctrl && pxav2_host->pins_cmd_gpio)
+			pinctrl_select_state(pxav2_host->pinctrl, pxav2_host->pins_cmd_gpio);
+
+		sdhci_writel(host, 0, SDHCI_ARGUMENT);
+		sdhci_writew(host, 0, SDHCI_TRANSFER_MODE);
+		sdhci_writew(host, SDHCI_MAKE_CMD(MMC_GO_IDLE_STATE, SDHCI_CMD_RESP_NONE),
+			     SDHCI_COMMAND);
+
+		/* Don't finish this request until the dummy CMD0 finishes */
+		return;
+	}
+
+	mmc_request_done(host->mmc, mrq);
+}
+
 static void pxav2_mmc_set_bus_width(struct sdhci_host *host, int width)
 {
 	u8 ctrl;
@@ -101,6 +176,27 @@ static void pxav2_mmc_set_bus_width(struct sdhci_host *host, int width)
 	writeb(ctrl, host->ioaddr + SDHCI_HOST_CONTROL);
 }
 
+struct sdhci_pxa_variant {
+	const struct sdhci_ops *ops;
+	unsigned int extra_quirks;
+};
+
+static const struct sdhci_ops pxav1_sdhci_ops = {
+	.read_w        = pxav1_readw,
+	.set_clock     = sdhci_set_clock,
+	.irq           = pxav1_irq,
+	.get_max_clock = sdhci_pltfm_clk_get_max_clock,
+	.set_bus_width = pxav2_mmc_set_bus_width,
+	.reset         = pxav2_reset,
+	.set_uhs_signaling = sdhci_set_uhs_signaling,
+	.request_done  = pxav1_request_done,
+};
+
+static const struct sdhci_pxa_variant __maybe_unused pxav1_variant = {
+	.ops = &pxav1_sdhci_ops,
+	.extra_quirks = SDHCI_QUIRK_NO_BUSY_IRQ | SDHCI_QUIRK_32BIT_DMA_SIZE,
+};
+
 static const struct sdhci_ops pxav2_sdhci_ops = {
 	.set_clock     = sdhci_set_clock,
 	.get_max_clock = sdhci_pltfm_clk_get_max_clock,
@@ -109,11 +205,14 @@ static const struct sdhci_ops pxav2_sdhci_ops = {
 	.set_uhs_signaling = sdhci_set_uhs_signaling,
 };
 
+static const struct sdhci_pxa_variant pxav2_variant = {
+	.ops = &pxav2_sdhci_ops,
+};
+
 #ifdef CONFIG_OF
 static const struct of_device_id sdhci_pxav2_of_match[] = {
-	{
-		.compatible = "mrvl,pxav2-mmc",
-	},
+	{ .compatible = "mrvl,pxav1-mmc", .data = &pxav1_variant, },
+	{ .compatible = "mrvl,pxav2-mmc", .data = &pxav2_variant, },
 	{},
 };
 MODULE_DEVICE_TABLE(of, sdhci_pxav2_of_match);
@@ -155,40 +254,53 @@ static int sdhci_pxav2_probe(struct platform_device *pdev)
 {
 	struct sdhci_pltfm_host *pltfm_host;
 	struct sdhci_pxa_platdata *pdata = pdev->dev.platform_data;
+	struct sdhci_pxav2_host *pxav2_host;
 	struct device *dev = &pdev->dev;
 	struct sdhci_host *host = NULL;
-	const struct of_device_id *match;
+	const struct sdhci_pxa_variant *variant;
 
 	int ret;
-	struct clk *clk;
+	struct clk *clk, *clk_core;
 
-	host = sdhci_pltfm_init(pdev, NULL, 0);
+	host = sdhci_pltfm_init(pdev, NULL, sizeof(*pxav2_host));
 	if (IS_ERR(host))
 		return PTR_ERR(host);
 
 	pltfm_host = sdhci_priv(host);
+	pxav2_host = sdhci_pltfm_priv(pltfm_host);
 
-	clk = devm_clk_get(dev, "PXA-SDHCLK");
+	clk = devm_clk_get(dev, "io");
+	if (IS_ERR(clk) && PTR_ERR(clk) != -EPROBE_DEFER)
+		clk = devm_clk_get(dev, NULL);
 	if (IS_ERR(clk)) {
-		dev_err(dev, "failed to get io clock\n");
 		ret = PTR_ERR(clk);
+		dev_err_probe(dev, ret, "failed to get io clock\n");
 		goto free;
 	}
 	pltfm_host->clk = clk;
 	ret = clk_prepare_enable(clk);
 	if (ret) {
-		dev_err(&pdev->dev, "failed to enable io clock\n");
+		dev_err(dev, "failed to enable io clock\n");
 		goto free;
 	}
 
+	clk_core = devm_clk_get_optional_enabled(dev, "core");
+	if (IS_ERR(clk_core)) {
+		ret = PTR_ERR(clk_core);
+		dev_err_probe(dev, ret, "failed to enable core clock\n");
+		goto disable_clk;
+	}
+
 	host->quirks = SDHCI_QUIRK_BROKEN_ADMA
 		| SDHCI_QUIRK_BROKEN_TIMEOUT_VAL
 		| SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN;
 
-	match = of_match_device(of_match_ptr(sdhci_pxav2_of_match), &pdev->dev);
-	if (match) {
+	variant = of_device_get_match_data(dev);
+	if (variant)
 		pdata = pxav2_get_mmc_pdata(dev);
-	}
+	else
+		variant = &pxav2_variant;
+
 	if (pdata) {
 		if (pdata->flags & PXA_FLAG_CARD_PERMANENT) {
 			/* on-chip device */
@@ -208,7 +320,23 @@ static int sdhci_pxav2_probe(struct platform_device *pdev)
 			host->mmc->pm_caps |= pdata->pm_caps;
 	}
 
-	host->ops = &pxav2_sdhci_ops;
+	host->quirks |= variant->extra_quirks;
+	host->ops = variant->ops;
+
+	/* Set up optional pinctrl for PXA168 SDIO IRQ fix */
+	pxav2_host->pinctrl = devm_pinctrl_get(dev);
+	if (!IS_ERR(pxav2_host->pinctrl)) {
+		pxav2_host->pins_cmd_gpio = pinctrl_lookup_state(pxav2_host->pinctrl,
+								 "state_cmd_gpio");
+		if (IS_ERR(pxav2_host->pins_cmd_gpio))
+			pxav2_host->pins_cmd_gpio = NULL;
+		pxav2_host->pins_default = pinctrl_lookup_state(pxav2_host->pinctrl,
+								"default");
+		if (IS_ERR(pxav2_host->pins_default))
+			pxav2_host->pins_default = NULL;
+	} else {
+		pxav2_host->pinctrl = NULL;
+	}
 
 	ret = sdhci_add_host(host);
 	if (ret)
diff --git a/drivers/mmc/host/sdhci-pxav3.c b/drivers/mmc/host/sdhci-pxav3.c
index a6d89a3f1946..e39dcc998772 100644
--- a/drivers/mmc/host/sdhci-pxav3.c
+++ b/drivers/mmc/host/sdhci-pxav3.c
@@ -124,10 +124,8 @@ static int armada_38x_quirks(struct platform_device *pdev,
 	struct resource *res;
 
 	host->quirks &= ~SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN;
-	host->quirks |= SDHCI_QUIRK_MISSING_CAPS;
 
-	host->caps = sdhci_readl(host, SDHCI_CAPABILITIES);
-	host->caps1 = sdhci_readl(host, SDHCI_CAPABILITIES_1);
+	sdhci_read_caps(host);
 
 	res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
 					   "conf-sdio3");
diff --git a/drivers/mmc/host/sdhci-sprd.c b/drivers/mmc/host/sdhci-sprd.c
index 525f979e2a97..7f4ee2e12735 100644
--- a/drivers/mmc/host/sdhci-sprd.c
+++ b/drivers/mmc/host/sdhci-sprd.c
@@ -553,8 +553,7 @@ static void sdhci_sprd_phy_param_parse(struct sdhci_sprd_host *sprd_host,
 
 static const struct sdhci_pltfm_data sdhci_sprd_pdata = {
 	.quirks = SDHCI_QUIRK_BROKEN_CARD_DETECTION |
-		  SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK |
-		  SDHCI_QUIRK_MISSING_CAPS,
+		  SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK,
 	.quirks2 = SDHCI_QUIRK2_BROKEN_HS200 |
 		   SDHCI_QUIRK2_USE_32BIT_BLK_CNT |
 		   SDHCI_QUIRK2_PRESET_VALUE_BROKEN,
@@ -671,8 +670,7 @@ static int sdhci_sprd_probe(struct platform_device *pdev)
 	 * will allow these modes to be specified only by device
 	 * tree properties through mmc_of_parse().
 	 */
-	host->caps = sdhci_readl(host, SDHCI_CAPABILITIES);
-	host->caps1 = sdhci_readl(host, SDHCI_CAPABILITIES_1);
+	sdhci_read_caps(host);
 	host->caps1 &= ~(SDHCI_SUPPORT_SDR50 | SDHCI_SUPPORT_SDR104 |
 			 SDHCI_SUPPORT_DDR50);
 
diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
index f3af1bd0f7b9..3241916141d7 100644
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -4121,9 +4121,6 @@ void __sdhci_read_caps(struct sdhci_host *host, const u16 *ver,
 	v = ver ? *ver : sdhci_readw(host, SDHCI_HOST_VERSION);
 	host->version = (v & SDHCI_SPEC_VER_MASK) >> SDHCI_SPEC_VER_SHIFT;
 
-	if (host->quirks & SDHCI_QUIRK_MISSING_CAPS)
-		return;
-
 	if (caps) {
 		host->caps = *caps;
 	} else {
diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h
index 605eaee805f7..f4f2085c274c 100644
--- a/drivers/mmc/host/sdhci.h
+++ b/drivers/mmc/host/sdhci.h
@@ -423,8 +423,6 @@ struct sdhci_host {
 #define SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN		(1<<25)
 /* Controller cannot support End Attribute in NOP ADMA descriptor */
 #define SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC		(1<<26)
-/* Controller is missing device caps. Use caps provided by host */
-#define SDHCI_QUIRK_MISSING_CAPS			(1<<27)
 /* Controller uses Auto CMD12 command to stop the transfer */
 #define SDHCI_QUIRK_MULTIBLOCK_READ_ACMD12		(1<<28)
 /* Controller doesn't have HISPD bit field in HI-SPEED SD card */
diff --git a/drivers/mmc/host/uniphier-sd.c b/drivers/mmc/host/uniphier-sd.c
index 3a8defdcca77..61acd69fac0e 100644
--- a/drivers/mmc/host/uniphier-sd.c
+++ b/drivers/mmc/host/uniphier-sd.c
@@ -8,6 +8,7 @@
 #include <linux/clk.h>
 #include <linux/delay.h>
 #include <linux/dma-mapping.h>
+#include <linux/mfd/syscon.h>
 #include <linux/mfd/tmio.h>
 #include <linux/mmc/host.h>
 #include <linux/module.h>
@@ -15,6 +16,7 @@
 #include <linux/of_device.h>
 #include <linux/pinctrl/consumer.h>
 #include <linux/platform_device.h>
+#include <linux/regmap.h>
 #include <linux/reset.h>
 
 #include "tmio_mmc.h"
@@ -48,6 +50,12 @@
 #define UNIPHIER_SD_DMA_ADDR_L		0x440
 #define UNIPHIER_SD_DMA_ADDR_H		0x444
 
+/* SD control */
+#define UNIPHIER_SDCTRL_CHOFFSET	0x200
+#define UNIPHIER_SDCTRL_MODE		0x30
+#define   UNIPHIER_SDCTRL_MODE_UHS1MOD		BIT(15)
+#define   UNIPHIER_SDCTRL_MODE_SDRSEL		BIT(14)
+
 /*
  * IP is extended to support various features: built-in DMA engine,
  * 1/1024 divisor, etc.
@@ -66,6 +74,8 @@ struct uniphier_sd_priv {
 	struct reset_control *rst_hw;
 	struct dma_chan *chan;
 	enum dma_data_direction dma_dir;
+	struct regmap *sdctrl_regmap;
+	u32 sdctrl_ch;
 	unsigned long clk_rate;
 	unsigned long caps;
 };
@@ -420,6 +430,42 @@ static void uniphier_sd_hw_reset(struct mmc_host *mmc)
 	usleep_range(300, 1000);
 }
 
+static void uniphier_sd_speed_switch(struct tmio_mmc_host *host)
+{
+	struct uniphier_sd_priv *priv = uniphier_sd_priv(host);
+	unsigned int offset;
+	u32 val = 0;
+
+	if (!(host->mmc->caps & MMC_CAP_UHS))
+		return;
+
+	if (host->mmc->ios.timing == MMC_TIMING_UHS_SDR50 ||
+	    host->mmc->ios.timing == MMC_TIMING_UHS_SDR104)
+		val = UNIPHIER_SDCTRL_MODE_SDRSEL;
+
+	offset = UNIPHIER_SDCTRL_CHOFFSET * priv->sdctrl_ch
+		+ UNIPHIER_SDCTRL_MODE;
+	regmap_write_bits(priv->sdctrl_regmap, offset,
+			  UNIPHIER_SDCTRL_MODE_SDRSEL, val);
+}
+
+static void uniphier_sd_uhs_enable(struct tmio_mmc_host *host, bool uhs_en)
+{
+	struct uniphier_sd_priv *priv = uniphier_sd_priv(host);
+	unsigned int offset;
+	u32 val;
+
+	if (!(host->mmc->caps & MMC_CAP_UHS))
+		return;
+
+	val = (uhs_en) ? UNIPHIER_SDCTRL_MODE_UHS1MOD : 0;
+
+	offset = UNIPHIER_SDCTRL_CHOFFSET * priv->sdctrl_ch
+		+ UNIPHIER_SDCTRL_MODE;
+	regmap_write_bits(priv->sdctrl_regmap, offset,
+			  UNIPHIER_SDCTRL_MODE_UHS1MOD, val);
+}
+
 static void uniphier_sd_set_clock(struct tmio_mmc_host *host,
 				  unsigned int clock)
 {
@@ -433,6 +479,8 @@ static void uniphier_sd_set_clock(struct tmio_mmc_host *host,
 	tmp &= ~CLK_CTL_SCLKEN;
 	writel(tmp, host->ctl + (CTL_SD_CARD_CLK_CTL << 1));
 
+	uniphier_sd_speed_switch(host);
+
 	if (clock == 0)
 		return;
 
@@ -500,14 +548,17 @@ static int uniphier_sd_start_signal_voltage_switch(struct mmc_host *mmc,
 	struct uniphier_sd_priv *priv = uniphier_sd_priv(host);
 	struct pinctrl_state *pinstate = NULL;
 	u32 val, tmp;
+	bool uhs_en;
 
 	switch (ios->signal_voltage) {
 	case MMC_SIGNAL_VOLTAGE_330:
 		val = UNIPHIER_SD_VOLT_330;
+		uhs_en = false;
 		break;
 	case MMC_SIGNAL_VOLTAGE_180:
 		val = UNIPHIER_SD_VOLT_180;
 		pinstate = priv->pinstate_uhs;
+		uhs_en = true;
 		break;
 	default:
 		return -ENOTSUPP;
@@ -523,12 +574,19 @@ static int uniphier_sd_start_signal_voltage_switch(struct mmc_host *mmc,
 	else
 		pinctrl_select_default_state(mmc_dev(mmc));
 
+	uniphier_sd_uhs_enable(host, uhs_en);
+
 	return 0;
 }
 
-static int uniphier_sd_uhs_init(struct tmio_mmc_host *host,
-				struct uniphier_sd_priv *priv)
+static int uniphier_sd_uhs_init(struct tmio_mmc_host *host)
 {
+	struct uniphier_sd_priv *priv = uniphier_sd_priv(host);
+	struct device *dev = &host->pdev->dev;
+	struct device_node *np = dev->of_node;
+	struct of_phandle_args args;
+	int ret;
+
 	priv->pinctrl = devm_pinctrl_get(mmc_dev(host->mmc));
 	if (IS_ERR(priv->pinctrl))
 		return PTR_ERR(priv->pinctrl);
@@ -537,8 +595,20 @@ static int uniphier_sd_uhs_init(struct tmio_mmc_host *host,
 	if (IS_ERR(priv->pinstate_uhs))
 		return PTR_ERR(priv->pinstate_uhs);
 
-	host->ops.start_signal_voltage_switch =
-					uniphier_sd_start_signal_voltage_switch;
+	ret = of_parse_phandle_with_fixed_args(np,
+					       "socionext,syscon-uhs-mode",
+					       1, 0, &args);
+	if (ret) {
+		dev_err(dev, "Can't get syscon-uhs-mode property\n");
+		return ret;
+	}
+	priv->sdctrl_regmap = syscon_node_to_regmap(args.np);
+	of_node_put(args.np);
+	if (IS_ERR(priv->sdctrl_regmap)) {
+		dev_err(dev, "Can't map syscon-uhs-mode\n");
+		return PTR_ERR(priv->sdctrl_regmap);
+	}
+	priv->sdctrl_ch = args.args[0];
 
 	return 0;
 }
@@ -601,12 +671,15 @@ static int uniphier_sd_probe(struct platform_device *pdev)
 	}
 
 	if (host->mmc->caps & MMC_CAP_UHS) {
-		ret = uniphier_sd_uhs_init(host, priv);
+		ret = uniphier_sd_uhs_init(host);
 		if (ret) {
 			dev_warn(dev,
 				 "failed to setup UHS (error %d).  Disabling UHS.",
 				 ret);
 			host->mmc->caps &= ~MMC_CAP_UHS;
+		} else {
+			host->ops.start_signal_voltage_switch =
+				uniphier_sd_start_signal_voltage_switch;
 		}
 	}