diff options
author | Yaniv Rosner <yanivr@broadcom.com> | 2011-08-02 22:59:40 +0000 |
---|---|---|
committer | David S. Miller <davem@davemloft.net> | 2011-08-03 03:22:17 -0700 |
commit | 793bd450370bf85cd63cccaff5e2f1a62908a52f (patch) | |
tree | c7fe42c8222837dce3b763992cbc6e177b8e70e2 /drivers | |
parent | 157fa283a7cb5bc6a55dd4e0daf6eeef66adf354 (diff) |
bnx2x: Fix LED behavior
This fix resolve two problems seen regarding LED:
1. LED doesn't flash during port identification.
2. Traffic LED sometimes do not blink.
Signed-off-by: Yaniv Rosner <yanivr@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'drivers')
-rw-r--r-- | drivers/net/bnx2x/bnx2x_link.c | 24 |
1 files changed, 17 insertions, 7 deletions
diff --git a/drivers/net/bnx2x/bnx2x_link.c b/drivers/net/bnx2x/bnx2x_link.c index 45255bdc5136..d8f6eff2d6b4 100644 --- a/drivers/net/bnx2x/bnx2x_link.c +++ b/drivers/net/bnx2x/bnx2x_link.c @@ -5922,20 +5922,30 @@ int bnx2x_set_led(struct link_params *params, tmp = EMAC_RD(bp, EMAC_REG_EMAC_LED); EMAC_WR(bp, EMAC_REG_EMAC_LED, (tmp | EMAC_LED_OVERRIDE)); - return rc; + /* + * return here without enabling traffic + * LED blink andsetting rate in ON mode. + * In oper mode, enabling LED blink + * and setting rate is needed. + */ + if (mode == LED_MODE_ON) + return rc; } - } else if (SINGLE_MEDIA_DIRECT(params) && - (CHIP_IS_E1x(bp) || - CHIP_IS_E2(bp))) { + } else if (SINGLE_MEDIA_DIRECT(params)) { /* * This is a work-around for HW issue found when link * is up in CL73 */ - REG_WR(bp, NIG_REG_LED_MODE_P0 + port*4, 0); REG_WR(bp, NIG_REG_LED_10G_P0 + port*4, 1); - } else { + if (CHIP_IS_E1x(bp) || + CHIP_IS_E2(bp) || + (mode == LED_MODE_ON)) + REG_WR(bp, NIG_REG_LED_MODE_P0 + port*4, 0); + else + REG_WR(bp, NIG_REG_LED_MODE_P0 + port*4, + hw_led_mode); + } else REG_WR(bp, NIG_REG_LED_MODE_P0 + port*4, hw_led_mode); - } REG_WR(bp, NIG_REG_LED_CONTROL_OVERRIDE_TRAFFIC_P0 + port*4, 0); /* Set blinking rate to ~15.9Hz */ |