cpqarray: remove it from the kernel

We disabled the ability to enable this driver back in October of 2013,
we should be able to safely remove it at this point. The initial goal
was to remove it in 3.15, so now is the time.

Signed-off-by: Jens Axboe <axboe@fb.com>

5 files changed, 0 insertions, 2392 deletions

diff --git a/drivers/block/Kconfig b/drivers/block/Kconfig
index 29819e719afa..39dd30b6ef86 100644
--- a/drivers/block/Kconfig
+++ b/drivers/block/Kconfig
@@ -110,16 +110,6 @@ source "drivers/block/mtip32xx/Kconfig"
 
 source "drivers/block/zram/Kconfig"
 
-config BLK_CPQ_DA
-	tristate "Compaq SMART2 support"
-	depends on PCI && VIRT_TO_BUS && 0
-	help
-	  This is the driver for Compaq Smart Array controllers.  Everyone
-	  using these boards should say Y here.  See the file
-	  <file:Documentation/blockdev/cpqarray.txt> for the current list of
-	  boards supported by this driver, and for further information on the
-	  use of this driver.
-
 config BLK_CPQ_CISS_DA
 	tristate "Compaq Smart Array 5xxx support"
 	depends on PCI
diff --git a/drivers/block/cpqarray.c b/drivers/block/cpqarray.c
deleted file mode 100644
index f749df9e15cd..000000000000
--- a/drivers/block/cpqarray.c
+++ /dev/null
@@ -1,1820 +0,0 @@
-/*
- *    Disk Array driver for Compaq SMART2 Controllers
- *    Copyright 1998 Compaq Computer Corporation
- *
- *    This program is free software; you can redistribute it and/or modify
- *    it under the terms of the GNU General Public License as published by
- *    the Free Software Foundation; either version 2 of the License, or
- *    (at your option) any later version.
- *
- *    This program is distributed in the hope that it will be useful,
- *    but WITHOUT ANY WARRANTY; without even the implied warranty of
- *    MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
- *    NON INFRINGEMENT.  See the GNU General Public License for more details.
- *
- *    You should have received a copy of the GNU General Public License
- *    along with this program; if not, write to the Free Software
- *    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- *    Questions/Comments/Bugfixes to iss_storagedev@hp.com
- *
- */
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/pci.h>
-#include <linux/bio.h>
-#include <linux/interrupt.h>
-#include <linux/kernel.h>
-#include <linux/slab.h>
-#include <linux/delay.h>
-#include <linux/major.h>
-#include <linux/fs.h>
-#include <linux/blkpg.h>
-#include <linux/timer.h>
-#include <linux/proc_fs.h>
-#include <linux/seq_file.h>
-#include <linux/init.h>
-#include <linux/hdreg.h>
-#include <linux/mutex.h>
-#include <linux/spinlock.h>
-#include <linux/blkdev.h>
-#include <linux/genhd.h>
-#include <linux/scatterlist.h>
-#include <asm/uaccess.h>
-#include <asm/io.h>
-
-
-#define SMART2_DRIVER_VERSION(maj,min,submin) ((maj<<16)|(min<<8)|(submin))
-
-#define DRIVER_NAME "Compaq SMART2 Driver (v 2.6.0)"
-#define DRIVER_VERSION SMART2_DRIVER_VERSION(2,6,0)
-
-/* Embedded module documentation macros - see modules.h */
-/* Original author Chris Frantz - Compaq Computer Corporation */
-MODULE_AUTHOR("Compaq Computer Corporation");
-MODULE_DESCRIPTION("Driver for Compaq Smart2 Array Controllers version 2.6.0");
-MODULE_LICENSE("GPL");
-
-#include "cpqarray.h"
-#include "ida_cmd.h"
-#include "smart1,2.h"
-#include "ida_ioctl.h"
-
-#define READ_AHEAD	128
-#define NR_CMDS		128 /* This could probably go as high as ~400 */
-
-#define MAX_CTLR	8
-#define CTLR_SHIFT	8
-
-#define CPQARRAY_DMA_MASK	0xFFFFFFFF	/* 32 bit DMA */
-
-static DEFINE_MUTEX(cpqarray_mutex);
-static int nr_ctlr;
-static ctlr_info_t *hba[MAX_CTLR];
-
-static int eisa[8];
-
-#define NR_PRODUCTS ARRAY_SIZE(products)
-
-/*  board_id = Subsystem Device ID & Vendor ID
- *  product = Marketing Name for the board
- *  access = Address of the struct of function pointers
- */
-static struct board_type products[] = {
-	{ 0x0040110E, "IDA",			&smart1_access },
-	{ 0x0140110E, "IDA-2",			&smart1_access },
-	{ 0x1040110E, "IAES",			&smart1_access },
-	{ 0x2040110E, "SMART",			&smart1_access },
-	{ 0x3040110E, "SMART-2/E",		&smart2e_access },
-	{ 0x40300E11, "SMART-2/P",		&smart2_access },
-	{ 0x40310E11, "SMART-2SL",		&smart2_access },
-	{ 0x40320E11, "Smart Array 3200",	&smart2_access },
-	{ 0x40330E11, "Smart Array 3100ES",	&smart2_access },
-	{ 0x40340E11, "Smart Array 221",	&smart2_access },
-	{ 0x40400E11, "Integrated Array",	&smart4_access },
-	{ 0x40480E11, "Compaq Raid LC2",        &smart4_access },
-	{ 0x40500E11, "Smart Array 4200",	&smart4_access },
-	{ 0x40510E11, "Smart Array 4250ES",	&smart4_access },
-	{ 0x40580E11, "Smart Array 431",	&smart4_access },
-};
-
-/* define the PCI info for the PCI cards this driver can control */
-static const struct pci_device_id cpqarray_pci_device_id[] =
-{
-	{ PCI_VENDOR_ID_DEC, PCI_DEVICE_ID_COMPAQ_42XX,
-		0x0E11, 0x4058, 0, 0, 0},       /* SA431 */
-	{ PCI_VENDOR_ID_DEC, PCI_DEVICE_ID_COMPAQ_42XX,
-		0x0E11, 0x4051, 0, 0, 0},      /* SA4250ES */
-	{ PCI_VENDOR_ID_DEC, PCI_DEVICE_ID_COMPAQ_42XX,
-		0x0E11, 0x4050, 0, 0, 0},      /* SA4200 */
-	{ PCI_VENDOR_ID_NCR, PCI_DEVICE_ID_NCR_53C1510,
-		0x0E11, 0x4048, 0, 0, 0},       /* LC2 */
-	{ PCI_VENDOR_ID_NCR, PCI_DEVICE_ID_NCR_53C1510,
-		0x0E11, 0x4040, 0, 0, 0},      /* Integrated Array */
-	{ PCI_VENDOR_ID_COMPAQ, PCI_DEVICE_ID_COMPAQ_SMART2P,
-		0x0E11, 0x4034, 0, 0, 0},       /* SA 221 */
-	{ PCI_VENDOR_ID_COMPAQ, PCI_DEVICE_ID_COMPAQ_SMART2P,
-		0x0E11, 0x4033, 0, 0, 0},       /* SA 3100ES*/
-	{ PCI_VENDOR_ID_COMPAQ, PCI_DEVICE_ID_COMPAQ_SMART2P,
-		0x0E11, 0x4032, 0, 0, 0},       /* SA 3200*/
-	{ PCI_VENDOR_ID_COMPAQ, PCI_DEVICE_ID_COMPAQ_SMART2P,
-		0x0E11, 0x4031, 0, 0, 0},       /* SA 2SL*/
-	{ PCI_VENDOR_ID_COMPAQ, PCI_DEVICE_ID_COMPAQ_SMART2P,
-		0x0E11, 0x4030, 0, 0, 0},       /* SA 2P */
-	{ 0 }
-};
-
-MODULE_DEVICE_TABLE(pci, cpqarray_pci_device_id);
-
-static struct gendisk *ida_gendisk[MAX_CTLR][NWD];
-
-/* Debug... */
-#define DBG(s)	do { s } while(0)
-/* Debug (general info)... */
-#define DBGINFO(s) do { } while(0)
-/* Debug Paranoid... */
-#define DBGP(s)  do { } while(0)
-/* Debug Extra Paranoid... */
-#define DBGPX(s) do { } while(0)
-
-static int cpqarray_pci_init(ctlr_info_t *c, struct pci_dev *pdev);
-static void __iomem *remap_pci_mem(ulong base, ulong size);
-static int cpqarray_eisa_detect(void);
-static int pollcomplete(int ctlr);
-static void getgeometry(int ctlr);
-static void start_fwbk(int ctlr);
-
-static cmdlist_t * cmd_alloc(ctlr_info_t *h, int get_from_pool);
-static void cmd_free(ctlr_info_t *h, cmdlist_t *c, int got_from_pool);
-
-static void free_hba(int i);
-static int alloc_cpqarray_hba(void);
-
-static int sendcmd(
-	__u8	cmd,
-	int	ctlr,
-	void	*buff,
-	size_t	size,
-	unsigned int blk,
-	unsigned int blkcnt,
-	unsigned int log_unit );
-
-static int ida_unlocked_open(struct block_device *bdev, fmode_t mode);
-static void ida_release(struct gendisk *disk, fmode_t mode);
-static int ida_ioctl(struct block_device *bdev, fmode_t mode, unsigned int cmd, unsigned long arg);
-static int ida_getgeo(struct block_device *bdev, struct hd_geometry *geo);
-static int ida_ctlr_ioctl(ctlr_info_t *h, int dsk, ida_ioctl_t *io);
-
-static void do_ida_request(struct request_queue *q);
-static void start_io(ctlr_info_t *h);
-
-static inline void addQ(cmdlist_t **Qptr, cmdlist_t *c);
-static inline cmdlist_t *removeQ(cmdlist_t **Qptr, cmdlist_t *c);
-static inline void complete_command(cmdlist_t *cmd, int timeout);
-
-static irqreturn_t do_ida_intr(int irq, void *dev_id);
-static void ida_timer(unsigned long tdata);
-static int ida_revalidate(struct gendisk *disk);
-static int revalidate_allvol(ctlr_info_t *host);
-static int cpqarray_register_ctlr(int ctlr, struct pci_dev *pdev);
-
-#ifdef CONFIG_PROC_FS
-static void ida_procinit(int i);
-#else
-static void ida_procinit(int i) {}
-#endif
-
-static inline drv_info_t *get_drv(struct gendisk *disk)
-{
-	return disk->private_data;
-}
-
-static inline ctlr_info_t *get_host(struct gendisk *disk)
-{
-	return disk->queue->queuedata;
-}
-
-
-static const struct block_device_operations ida_fops  = {
-	.owner		= THIS_MODULE,
-	.open		= ida_unlocked_open,
-	.release	= ida_release,
-	.ioctl		= ida_ioctl,
-	.getgeo		= ida_getgeo,
-	.revalidate_disk= ida_revalidate,
-};
-
-
-#ifdef CONFIG_PROC_FS
-
-static struct proc_dir_entry *proc_array;
-static const struct file_operations ida_proc_fops;
-
-/*
- * Get us a file in /proc/array that says something about each controller.
- * Create /proc/array if it doesn't exist yet.
- */
-static void __init ida_procinit(int i)
-{
-	if (proc_array == NULL) {
-		proc_array = proc_mkdir("driver/cpqarray", NULL);
-		if (!proc_array) return;
-	}
-
-	proc_create_data(hba[i]->devname, 0, proc_array, &ida_proc_fops, hba[i]);
-}
-
-/*
- * Report information about this controller.
- */
-static int ida_proc_show(struct seq_file *m, void *v)
-{
-	int i, ctlr;
-	ctlr_info_t *h = (ctlr_info_t*)m->private;
-	drv_info_t *drv;
-#ifdef CPQ_PROC_PRINT_QUEUES
-	cmdlist_t *c;
-	unsigned long flags;
-#endif
-
-	ctlr = h->ctlr;
-	seq_printf(m, "%s:  Compaq %s Controller\n"
-		"       Board ID: 0x%08lx\n"
-		"       Firmware Revision: %c%c%c%c\n"
-		"       Controller Sig: 0x%08lx\n"
-		"       Memory Address: 0x%08lx\n"
-		"       I/O Port: 0x%04x\n"
-		"       IRQ: %d\n"
-		"       Logical drives: %d\n"
-		"       Physical drives: %d\n\n"
-		"       Current Q depth: %d\n"
-		"       Max Q depth since init: %d\n\n",
-		h->devname, 
-		h->product_name,
-		(unsigned long)h->board_id,
-		h->firm_rev[0], h->firm_rev[1], h->firm_rev[2], h->firm_rev[3],
-		(unsigned long)h->ctlr_sig, (unsigned long)h->vaddr,
-		(unsigned int) h->io_mem_addr, (unsigned int)h->intr,
-		h->log_drives, h->phys_drives,
-		h->Qdepth, h->maxQsinceinit);
-
-	seq_puts(m, "Logical Drive Info:\n");
-
-	for(i=0; i<h->log_drives; i++) {
-		drv = &h->drv[i];
-		seq_printf(m, "ida/c%dd%d: blksz=%d nr_blks=%d\n",
-				ctlr, i, drv->blk_size, drv->nr_blks);
-	}
-
-#ifdef CPQ_PROC_PRINT_QUEUES
-	spin_lock_irqsave(IDA_LOCK(h->ctlr), flags); 
-	seq_puts(m, "\nCurrent Queues:\n");
-
-	c = h->reqQ;
-	seq_printf(m, "reqQ = %p", c);
-	if (c) c=c->next;
-	while(c && c != h->reqQ) {
-		seq_printf(m, "->%p", c);
-		c=c->next;
-	}
-
-	c = h->cmpQ;
-	seq_printf(m, "\ncmpQ = %p", c);
-	if (c) c=c->next;
-	while(c && c != h->cmpQ) {
-		seq_printf(m, "->%p", c);
-		c=c->next;
-	}
-
-	seq_putc(m, '\n');
-	spin_unlock_irqrestore(IDA_LOCK(h->ctlr), flags); 
-#endif
-	seq_printf(m, "nr_allocs = %d\nnr_frees = %d\n",
-			h->nr_allocs, h->nr_frees);
-	return 0;
-}
-
-static int ida_proc_open(struct inode *inode, struct file *file)
-{
-	return single_open(file, ida_proc_show, PDE_DATA(inode));
-}
-
-static const struct file_operations ida_proc_fops = {
-	.owner		= THIS_MODULE,
-	.open		= ida_proc_open,
-	.read		= seq_read,
-	.llseek		= seq_lseek,
-	.release	= single_release,
-};
-#endif /* CONFIG_PROC_FS */
-
-module_param_array(eisa, int, NULL, 0);
-
-static void release_io_mem(ctlr_info_t *c)
-{
-	/* if IO mem was not protected do nothing */
-	if( c->io_mem_addr == 0)
-		return;
-	release_region(c->io_mem_addr, c->io_mem_length);
-	c->io_mem_addr = 0;
-	c->io_mem_length = 0;
-}
-
-static void cpqarray_remove_one(int i)
-{
-	int j;
-	char buff[4];
-
-	/* sendcmd will turn off interrupt, and send the flush...
-	 * To write all data in the battery backed cache to disks
-	 * no data returned, but don't want to send NULL to sendcmd */
-	if( sendcmd(FLUSH_CACHE, i, buff, 4, 0, 0, 0))
-	{
-		printk(KERN_WARNING "Unable to flush cache on controller %d\n",
-				i);
-	}
-	free_irq(hba[i]->intr, hba[i]);
-	iounmap(hba[i]->vaddr);
-	unregister_blkdev(COMPAQ_SMART2_MAJOR+i, hba[i]->devname);
-	del_timer(&hba[i]->timer);
-	remove_proc_entry(hba[i]->devname, proc_array);
-	pci_free_consistent(hba[i]->pci_dev,
-			NR_CMDS * sizeof(cmdlist_t), (hba[i]->cmd_pool),
-			hba[i]->cmd_pool_dhandle);
-	kfree(hba[i]->cmd_pool_bits);
-	for(j = 0; j < NWD; j++) {
-		if (ida_gendisk[i][j]->flags & GENHD_FL_UP)
-			del_gendisk(ida_gendisk[i][j]);
-		put_disk(ida_gendisk[i][j]);
-	}
-	blk_cleanup_queue(hba[i]->queue);
-	release_io_mem(hba[i]);
-	free_hba(i);
-}
-
-static void cpqarray_remove_one_pci(struct pci_dev *pdev)
-{
-	int i;
-	ctlr_info_t *tmp_ptr;
-
-	if (pci_get_drvdata(pdev) == NULL) {
-		printk( KERN_ERR "cpqarray: Unable to remove device \n");
-		return;
-	}
-
-	tmp_ptr = pci_get_drvdata(pdev);
-	i = tmp_ptr->ctlr;
-	if (hba[i] == NULL) {
-		printk(KERN_ERR "cpqarray: controller %d appears to have"
-			"already been removed \n", i);
-		return;
-        }
-	pci_set_drvdata(pdev, NULL);
-
-	cpqarray_remove_one(i);
-}
-
-/* removing an instance that was not removed automatically..
- * must be an eisa card.
- */
-static void cpqarray_remove_one_eisa(int i)
-{
-	if (hba[i] == NULL) {
-		printk(KERN_ERR "cpqarray: controller %d appears to have"
-			"already been removed \n", i);
-		return;
-        }
-	cpqarray_remove_one(i);
-}
-
-/* pdev is NULL for eisa */
-static int cpqarray_register_ctlr(int i, struct pci_dev *pdev)
-{
-	struct request_queue *q;
-	int j;
-
-	/* 
-	 * register block devices
-	 * Find disks and fill in structs
-	 * Get an interrupt, set the Q depth and get into /proc
-	 */
-
-	/* If this successful it should insure that we are the only */
-	/* instance of the driver */
-	if (register_blkdev(COMPAQ_SMART2_MAJOR+i, hba[i]->devname)) {
-		goto Enomem4;
-	}
-	hba[i]->access.set_intr_mask(hba[i], 0);
-	if (request_irq(hba[i]->intr, do_ida_intr, IRQF_SHARED,
-			hba[i]->devname, hba[i]))
-	{
-		printk(KERN_ERR "cpqarray: Unable to get irq %d for %s\n",
-				hba[i]->intr, hba[i]->devname);
-		goto Enomem3;
-	}
-		
-	for (j=0; j<NWD; j++) {
-		ida_gendisk[i][j] = alloc_disk(1 << NWD_SHIFT);
-		if (!ida_gendisk[i][j])
-			goto Enomem2;
-	}
-
-	hba[i]->cmd_pool = pci_alloc_consistent(
-		hba[i]->pci_dev, NR_CMDS * sizeof(cmdlist_t),
-		&(hba[i]->cmd_pool_dhandle));
-	hba[i]->cmd_pool_bits = kcalloc(
-		DIV_ROUND_UP(NR_CMDS, BITS_PER_LONG), sizeof(unsigned long),
-		GFP_KERNEL);
-
-	if (!hba[i]->cmd_pool_bits || !hba[i]->cmd_pool)
-			goto Enomem1;
-
-	memset(hba[i]->cmd_pool, 0, NR_CMDS * sizeof(cmdlist_t));
-	printk(KERN_INFO "cpqarray: Finding drives on %s",
-		hba[i]->devname);
-
-	spin_lock_init(&hba[i]->lock);
-	q = blk_init_queue(do_ida_request, &hba[i]->lock);
-	if (!q)
-		goto Enomem1;
-
-	hba[i]->queue = q;
-	q->queuedata = hba[i];
-
-	getgeometry(i);
-	start_fwbk(i);
-
-	ida_procinit(i);
-
-	if (pdev)
-		blk_queue_bounce_limit(q, hba[i]->pci_dev->dma_mask);
-
-	/* This is a hardware imposed limit. */
-	blk_queue_max_segments(q, SG_MAX);
-
-	init_timer(&hba[i]->timer);
-	hba[i]->timer.expires = jiffies + IDA_TIMER;
-	hba[i]->timer.data = (unsigned long)hba[i];
-	hba[i]->timer.function = ida_timer;
-	add_timer(&hba[i]->timer);
-
-	/* Enable IRQ now that spinlock and rate limit timer are set up */
-	hba[i]->access.set_intr_mask(hba[i], FIFO_NOT_EMPTY);
-
-	for(j=0; j<NWD; j++) {
-		struct gendisk *disk = ida_gendisk[i][j];
-		drv_info_t *drv = &hba[i]->drv[j];
-		sprintf(disk->disk_name, "ida/c%dd%d", i, j);
-		disk->major = COMPAQ_SMART2_MAJOR + i;
-		disk->first_minor = j<<NWD_SHIFT;
-		disk->fops = &ida_fops;
-		if (j && !drv->nr_blks)
-			continue;
-		blk_queue_logical_block_size(hba[i]->queue, drv->blk_size);
-		set_capacity(disk, drv->nr_blks);
-		disk->queue = hba[i]->queue;
-		disk->private_data = drv;
-		add_disk(disk);
-	}
-
-	/* done ! */
-	return(i);
-
-Enomem1:
-	nr_ctlr = i; 
-	kfree(hba[i]->cmd_pool_bits);
-	if (hba[i]->cmd_pool)
-		pci_free_consistent(hba[i]->pci_dev, NR_CMDS*sizeof(cmdlist_t), 
-				    hba[i]->cmd_pool, hba[i]->cmd_pool_dhandle);
-Enomem2:
-	while (j--) {
-		put_disk(ida_gendisk[i][j]);
-		ida_gendisk[i][j] = NULL;
-	}
-	free_irq(hba[i]->intr, hba[i]);
-Enomem3:
-	unregister_blkdev(COMPAQ_SMART2_MAJOR+i, hba[i]->devname);
-Enomem4:
-	if (pdev)
-		pci_set_drvdata(pdev, NULL);
-	release_io_mem(hba[i]);
-	free_hba(i);
-
-	printk( KERN_ERR "cpqarray: out of memory");
-
-	return -1;
-}
-
-static int cpqarray_init_one(struct pci_dev *pdev,
-			     const struct pci_device_id *ent)
-{
-	int i;
-
-	printk(KERN_DEBUG "cpqarray: Device 0x%x has been found at"
-			" bus %d dev %d func %d\n",
-			pdev->device, pdev->bus->number, PCI_SLOT(pdev->devfn),
-			PCI_FUNC(pdev->devfn));
-	i = alloc_cpqarray_hba();
-	if( i < 0 )
-		return (-1);
-	memset(hba[i], 0, sizeof(ctlr_info_t));
-	sprintf(hba[i]->devname, "ida%d", i);
-	hba[i]->ctlr = i;
-	/* Initialize the pdev driver private data */
-	pci_set_drvdata(pdev, hba[i]);
-
-	if (cpqarray_pci_init(hba[i], pdev) != 0) {
-		pci_set_drvdata(pdev, NULL);
-		release_io_mem(hba[i]);
-		free_hba(i);
-		return -1;
-	}
-
-	return (cpqarray_register_ctlr(i, pdev));
-}
-
-static struct pci_driver cpqarray_pci_driver = {
-	.name = "cpqarray",
-	.probe = cpqarray_init_one,
-	.remove = cpqarray_remove_one_pci,
-	.id_table = cpqarray_pci_device_id,
-};
-
-/*
- *  This is it.  Find all the controllers and register them.
- *  returns the number of block devices registered.
- */
-static int __init cpqarray_init(void)
-{
-	int num_cntlrs_reg = 0;
-	int i;
-	int rc = 0;
-
-	/* detect controllers */
-	printk(DRIVER_NAME "\n");
-
-	rc = pci_register_driver(&cpqarray_pci_driver);
-	if (rc)
-		return rc;
-	cpqarray_eisa_detect();
-	
-	for (i=0; i < MAX_CTLR; i++) {
-		if (hba[i] != NULL)
-			num_cntlrs_reg++;
-	}
-
-	if (num_cntlrs_reg)
-		return 0;
-	else {
-		pci_unregister_driver(&cpqarray_pci_driver);
-		return -ENODEV;
-	}
-}
-
-/* Function to find the first free pointer into our hba[] array */
-/* Returns -1 if no free entries are left.  */
-static int alloc_cpqarray_hba(void)
-{
-	int i;
-
-	for(i=0; i< MAX_CTLR; i++) {
-		if (hba[i] == NULL) {
-			hba[i] = kmalloc(sizeof(ctlr_info_t), GFP_KERNEL);
-			if(hba[i]==NULL) {
-				printk(KERN_ERR "cpqarray: out of memory.\n");
-				return (-1);
-			}
-			return (i);
-		}
-	}
-	printk(KERN_WARNING "cpqarray: This driver supports a maximum"
-		" of 8 controllers.\n");
-	return(-1);
-}
-
-static void free_hba(int i)
-{
-	kfree(hba[i]);
-	hba[i]=NULL;
-}
-
-/*
- * Find the IO address of the controller, its IRQ and so forth.  Fill
- * in some basic stuff into the ctlr_info_t structure.
- */
-static int cpqarray_pci_init(ctlr_info_t *c, struct pci_dev *pdev)
-{
-	ushort vendor_id, device_id, command;
-	unchar cache_line_size, latency_timer;
-	unchar irq, revision;
-	unsigned long addr[6];
-	__u32 board_id;
-
-	int i;
-
-	c->pci_dev = pdev;
-	pci_set_master(pdev);
-	if (pci_enable_device(pdev)) {
-		printk(KERN_ERR "cpqarray: Unable to Enable PCI device\n");
-		return -1;
-	}
-	vendor_id = pdev->vendor;
-	device_id = pdev->device;
-	revision  = pdev->revision;
-	irq = pdev->irq;
-
-	for(i=0; i<6; i++)
-		addr[i] = pci_resource_start(pdev, i);
-
-	if (pci_set_dma_mask(pdev, CPQARRAY_DMA_MASK) != 0)
-	{
-		printk(KERN_ERR "cpqarray: Unable to set DMA mask\n");
-		return -1;
-	}
-
-	pci_read_config_word(pdev, PCI_COMMAND, &command);
-	pci_read_config_byte(pdev, PCI_CACHE_LINE_SIZE, &cache_line_size);
-	pci_read_config_byte(pdev, PCI_LATENCY_TIMER, &latency_timer);
-
-	pci_read_config_dword(pdev, 0x2c, &board_id);
-
-	/* check to see if controller has been disabled */
-	if(!(command & 0x02)) {
-		printk(KERN_WARNING
-			"cpqarray: controller appears to be disabled\n");
-		return(-1);
-	}
-
-DBGINFO(
-	printk("vendor_id = %x\n", vendor_id);
-	printk("device_id = %x\n", device_id);
-	printk("command = %x\n", command);
-	for(i=0; i<6; i++)
-		printk("addr[%d] = %lx\n", i, addr[i]);
-	printk("revision = %x\n", revision);
-	printk("irq = %x\n", irq);
-	printk("cache_line_size = %x\n", cache_line_size);
-	printk("latency_timer = %x\n", latency_timer);
-	printk("board_id = %x\n", board_id);
-);
-
-	c->intr = irq;
-
-	for(i=0; i<6; i++) {
-		if (pci_resource_flags(pdev, i) & PCI_BASE_ADDRESS_SPACE_IO)
-		{ /* IO space */
-			c->io_mem_addr = addr[i];
-			c->io_mem_length = pci_resource_end(pdev, i)
-				- pci_resource_start(pdev, i) + 1;
-			if(!request_region( c->io_mem_addr, c->io_mem_length,
-				"cpqarray"))
-			{
-				printk( KERN_WARNING "cpqarray I/O memory range already in use addr %lx length = %ld\n", c->io_mem_addr, c->io_mem_length);
-				c->io_mem_addr = 0;
-				c->io_mem_length = 0;
-			}
-			break;
-		}
-	}
-
-	c->paddr = 0;
-	for(i=0; i<6; i++)
-		if (!(pci_resource_flags(pdev, i) &
-				PCI_BASE_ADDRESS_SPACE_IO)) {
-			c->paddr = pci_resource_start (pdev, i);
-			break;
-		}
-	if (!c->paddr)
-		return -1;
-	c->vaddr = remap_pci_mem(c->paddr, 128);
-	if (!c->vaddr)
-		return -1;
-	c->board_id = board_id;
-
-	for(i=0; i<NR_PRODUCTS; i++) {
-		if (board_id == products[i].board_id) {
-			c->product_name = products[i].product_name;
-			c->access = *(products[i].access);
-			break;
-		}
-	}
-	if (i == NR_PRODUCTS) {
-		printk(KERN_WARNING "cpqarray: Sorry, I don't know how"
-			" to access the SMART Array controller %08lx\n", 
-				(unsigned long)board_id);
-		return -1;
-	}
-
-	return 0;
-}
-
-/*
- * Map (physical) PCI mem into (virtual) kernel space
- */
-static void __iomem *remap_pci_mem(ulong base, ulong size)
-{
-        ulong page_base        = ((ulong) base) & PAGE_MASK;
-        ulong page_offs        = ((ulong) base) - page_base;
-        void __iomem *page_remapped    = ioremap(page_base, page_offs+size);
-
-        return (page_remapped ? (page_remapped + page_offs) : NULL);
-}
-
-#ifndef MODULE
-/*
- * Config string is a comma separated set of i/o addresses of EISA cards.
- */
-static int cpqarray_setup(char *str)
-{
-	int i, ints[9];
-
-	(void)get_options(str, ARRAY_SIZE(ints), ints);
-
-	for(i=0; i<ints[0] && i<8; i++)
-		eisa[i] = ints[i+1];
-	return 1;
-}
-
-__setup("smart2=", cpqarray_setup);
-
-#endif
-
-/*
- * Find an EISA controller's signature.  Set up an hba if we find it.
- */
-static int cpqarray_eisa_detect(void)
-{
-	int i=0, j;
-	__u32 board_id;
-	int intr;
-	int ctlr;
-	int num_ctlr = 0;
-
-	while(i<8 && eisa[i]) {
-		ctlr = alloc_cpqarray_hba();
-		if(ctlr == -1)
-			break;
-		board_id = inl(eisa[i]+0xC80);
-		for(j=0; j < NR_PRODUCTS; j++)
-			if (board_id == products[j].board_id) 
-				break;
-
-		if (j == NR_PRODUCTS) {
-			printk(KERN_WARNING "cpqarray: Sorry, I don't know how"
-				" to access the SMART Array controller %08lx\n",				 (unsigned long)board_id);
-			continue;
-		}
-
-		memset(hba[ctlr], 0, sizeof(ctlr_info_t));
-		hba[ctlr]->io_mem_addr = eisa[i];
-		hba[ctlr]->io_mem_length = 0x7FF;
-		if(!request_region(hba[ctlr]->io_mem_addr,
-				hba[ctlr]->io_mem_length,
-				"cpqarray"))
-		{
-			printk(KERN_WARNING "cpqarray: I/O range already in "
-					"use addr = %lx length = %ld\n",
-					hba[ctlr]->io_mem_addr,
-					hba[ctlr]->io_mem_length);
-			free_hba(ctlr);
-			continue;
-		}
-
-		/*
-		 * Read the config register to find our interrupt
-		 */
-		intr = inb(eisa[i]+0xCC0) >> 4;
-		if (intr & 1) intr = 11;
-		else if (intr & 2) intr = 10;
-		else if (intr & 4) intr = 14;
-		else if (intr & 8) intr = 15;
-		
-		hba[ctlr]->intr = intr;
-		sprintf(hba[ctlr]->devname, "ida%d", nr_ctlr);
-		hba[ctlr]->product_name = products[j].product_name;
-		hba[ctlr]->access = *(products[j].access);
-		hba[ctlr]->ctlr = ctlr;
-		hba[ctlr]->board_id = board_id;
-		hba[ctlr]->pci_dev = NULL; /* not PCI */
-
-DBGINFO(
-	printk("i = %d, j = %d\n", i, j);
-	printk("irq = %x\n", intr);
-	printk("product name = %s\n", products[j].product_name);
-	printk("board_id = %x\n", board_id);
-);
-
-		num_ctlr++;
-		i++;
-
-		if (cpqarray_register_ctlr(ctlr, NULL) == -1)
-			printk(KERN_WARNING
-				"cpqarray: Can't register EISA controller %d\n",
-				ctlr);
-
-	}
-
-	return num_ctlr;
-}
-
-/*
- * Open.  Make sure the device is really there.
- */
-static int ida_open(struct block_device *bdev, fmode_t mode)
-{
-	drv_info_t *drv = get_drv(bdev->bd_disk);
-	ctlr_info_t *host = get_host(bdev->bd_disk);
-
-	DBGINFO(printk("ida_open %s\n", bdev->bd_disk->disk_name));
-	/*
-	 * Root is allowed to open raw volume zero even if it's not configured
-	 * so array config can still work.  I don't think I really like this,
-	 * but I'm already using way to many device nodes to claim another one
-	 * for "raw controller".
-	 */
-	if (!drv->nr_blks) {
-		if (!capable(CAP_SYS_RAWIO))
-			return -ENXIO;
-		if (!capable(CAP_SYS_ADMIN) && drv != host->drv)
-			return -ENXIO;
-	}
-	host->usage_count++;
-	return 0;
-}
-
-static int ida_unlocked_open(struct block_device *bdev, fmode_t mode)
-{
-	int ret;
-
-	mutex_lock(&cpqarray_mutex);
-	ret = ida_open(bdev, mode);
-	mutex_unlock(&cpqarray_mutex);
-
-	return ret;
-}
-
-/*
- * Close.  Sync first.
- */
-static void ida_release(struct gendisk *disk, fmode_t mode)
-{
-	ctlr_info_t *host;
-
-	mutex_lock(&cpqarray_mutex);
-	host = get_host(disk);
-	host->usage_count--;
-	mutex_unlock(&cpqarray_mutex);
-}
-
-/*
- * Enqueuing and dequeuing functions for cmdlists.
- */
-static inline void addQ(cmdlist_t **Qptr, cmdlist_t *c)
-{
-	if (*Qptr == NULL) {
-		*Qptr = c;
-		c->next = c->prev = c;
-	} else {
-		c->prev = (*Qptr)->prev;
-		c->next = (*Qptr);
-		(*Qptr)->prev->next = c;
-		(*Qptr)->prev = c;
-	}
-}
-
-static inline cmdlist_t *removeQ(cmdlist_t **Qptr, cmdlist_t *c)
-{
-	if (c && c->next != c) {
-		if (*Qptr == c) *Qptr = c->next;
-		c->prev->next = c->next;
-		c->next->prev = c->prev;
-	} else {
-		*Qptr = NULL;
-	}
-	return c;
-}
-
-/*
- * Get a request and submit it to the controller.
- * This routine needs to grab all the requests it possibly can from the
- * req Q and submit them.  Interrupts are off (and need to be off) when you
- * are in here (either via the dummy do_ida_request functions or by being
- * called from the interrupt handler
- */
-static void do_ida_request(struct request_queue *q)
-{
-	ctlr_info_t *h = q->queuedata;
-	cmdlist_t *c;
-	struct request *creq;
-	struct scatterlist tmp_sg[SG_MAX];
-	int i, dir, seg;
-
-queue_next:
-	creq = blk_peek_request(q);
-	if (!creq)
-		goto startio;
-
-	BUG_ON(creq->nr_phys_segments > SG_MAX);
-
-	if ((c = cmd_alloc(h,1)) == NULL)
-		goto startio;
-
-	blk_start_request(creq);
-
-	c->ctlr = h->ctlr;
-	c->hdr.unit = (drv_info_t *)(creq->rq_disk->private_data) - h->drv;
-	c->hdr.size = sizeof(rblk_t) >> 2;
-	c->size += sizeof(rblk_t);
-
-	c->req.hdr.blk = blk_rq_pos(creq);
-	c->rq = creq;
-DBGPX(
-	printk("sector=%d, nr_sectors=%u\n",
-	       blk_rq_pos(creq), blk_rq_sectors(creq));
-);
-	sg_init_table(tmp_sg, SG_MAX);
-	seg = blk_rq_map_sg(q, creq, tmp_sg);
-
-	/* Now do all the DMA Mappings */
-	if (rq_data_dir(creq) == READ)
-		dir = PCI_DMA_FROMDEVICE;
-	else
-		dir = PCI_DMA_TODEVICE;
-	for( i=0; i < seg; i++)
-	{
-		c->req.sg[i].size = tmp_sg[i].length;
-		c->req.sg[i].addr = (__u32) pci_map_page(h->pci_dev,
-						 sg_page(&tmp_sg[i]),
-						 tmp_sg[i].offset,
-						 tmp_sg[i].length, dir);
-	}
-DBGPX(	printk("Submitting %u sectors in %d segments\n", blk_rq_sectors(creq), seg); );
-	c->req.hdr.sg_cnt = seg;
-	c->req.hdr.blk_cnt = blk_rq_sectors(creq);
-	c->req.hdr.cmd = (rq_data_dir(creq) == READ) ? IDA_READ : IDA_WRITE;
-	c->type = CMD_RWREQ;
-
-	/* Put the request on the tail of the request queue */
-	addQ(&h->reqQ, c);
-	h->Qdepth++;
-	if (h->Qdepth > h->maxQsinceinit) 
-		h->maxQsinceinit = h->Qdepth;
-
-	goto queue_next;
-
-startio:
-	start_io(h);
-}
-
-/* 
- * start_io submits everything on a controller's request queue
- * and moves it to the completion queue.
- *
- * Interrupts had better be off if you're in here
- */
-static void start_io(ctlr_info_t *h)
-{
-	cmdlist_t *c;
-
-	while((c = h->reqQ) != NULL) {
-		/* Can't do anything if we're busy */
-		if (h->access.fifo_full(h) == 0)
-			return;
-
-		/* Get the first entry from the request Q */
-		removeQ(&h->reqQ, c);
-		h->Qdepth--;
-	
-		/* Tell the controller to do our bidding */
-		h->access.submit_command(h, c);
-
-		/* Get onto the completion Q */
-		addQ(&h->cmpQ, c);
-	}
-}
-
-/*
- * Mark all buffers that cmd was responsible for
- */
-static inline void complete_command(cmdlist_t *cmd, int timeout)
-{
-	struct request *rq = cmd->rq;
-	int error = 0;
-	int i, ddir;
-
-	if (cmd->req.hdr.rcode & RCODE_NONFATAL &&
-	   (hba[cmd->ctlr]->misc_tflags & MISC_NONFATAL_WARN) == 0) {
-		printk(KERN_NOTICE "Non Fatal error on ida/c%dd%d\n",
-				cmd->ctlr, cmd->hdr.unit);
-		hba[cmd->ctlr]->misc_tflags |= MISC_NONFATAL_WARN;
-	}
-	if (cmd->req.hdr.rcode & RCODE_FATAL) {
-		printk(KERN_WARNING "Fatal error on ida/c%dd%d\n",
-				cmd->ctlr, cmd->hdr.unit);
-		error = -EIO;
-	}
-	if (cmd->req.hdr.rcode & RCODE_INVREQ) {
-				printk(KERN_WARNING "Invalid request on ida/c%dd%d = (cmd=%x sect=%d cnt=%d sg=%d ret=%x)\n",
-				cmd->ctlr, cmd->hdr.unit, cmd->req.hdr.cmd,
-				cmd->req.hdr.blk, cmd->req.hdr.blk_cnt,
-				cmd->req.hdr.sg_cnt, cmd->req.hdr.rcode);
-		error = -EIO;
-	}
-	if (timeout)
-		error = -EIO;
-	/* unmap the DMA mapping for all the scatter gather elements */
-	if (cmd->req.hdr.cmd == IDA_READ)
-		ddir = PCI_DMA_FROMDEVICE;
-	else
-		ddir = PCI_DMA_TODEVICE;
-        for(i=0; i<cmd->req.hdr.sg_cnt; i++)
-                pci_unmap_page(hba[cmd->ctlr]->pci_dev, cmd->req.sg[i].addr,
-				cmd->req.sg[i].size, ddir);
-
-	DBGPX(printk("Done with %p\n", rq););
-	__blk_end_request_all(rq, error);
-}
-
-/*
- *  The controller will interrupt us upon completion of commands.
- *  Find the command on the completion queue, remove it, tell the OS and
- *  try to queue up more IO
- */
-static irqreturn_t do_ida_intr(int irq, void *dev_id)
-{
-	ctlr_info_t *h = dev_id;
-	cmdlist_t *c;
-	unsigned long istat;
-	unsigned long flags;
-	__u32 a,a1;
-
-	istat = h->access.intr_pending(h);
-	/* Is this interrupt for us? */
-	if (istat == 0)
-		return IRQ_NONE;
-
-	/*
-	 * If there are completed commands in the completion queue,
-	 * we had better do something about it.
-	 */
-	spin_lock_irqsave(IDA_LOCK(h->ctlr), flags);
-	if (istat & FIFO_NOT_EMPTY) {
-		while((a = h->access.command_completed(h))) {
-			a1 = a; a &= ~3;
-			if ((c = h->cmpQ) == NULL)
-			{  
-				printk(KERN_WARNING "cpqarray: Completion of %08lx ignored\n", (unsigned long)a1);
-				continue;	
-			} 
-			while(c->busaddr != a) {
-				c = c->next;
-				if (c == h->cmpQ) 
-					break;
-			}
-			/*
-			 * If we've found the command, take it off the
-			 * completion Q and free it
-			 */
-			if (c->busaddr == a) {
-				removeQ(&h->cmpQ, c);
-				/*  Check for invalid command.
-                                 *  Controller returns command error,
-                                 *  But rcode = 0.
-                                 */
-
-				if((a1 & 0x03) && (c->req.hdr.rcode == 0))
-                                {
-                                	c->req.hdr.rcode = RCODE_INVREQ;
-                                }
-				if (c->type == CMD_RWREQ) {
-					complete_command(c, 0);
-					cmd_free(h, c, 1);
-				} else if (c->type == CMD_IOCTL_PEND) {
-					c->type = CMD_IOCTL_DONE;
-				}
-				continue;
-			}
-		}
-	}
-
-	/*
-	 * See if we can queue up some more IO
-	 */
-	do_ida_request(h->queue);
-	spin_unlock_irqrestore(IDA_LOCK(h->ctlr), flags); 
-	return IRQ_HANDLED;
-}
-
-/*
- * This timer was for timing out requests that haven't happened after
- * IDA_TIMEOUT.  That wasn't such a good idea.  This timer is used to
- * reset a flags structure so we don't flood the user with
- * "Non-Fatal error" messages.
- */
-static void ida_timer(unsigned long tdata)
-{
-	ctlr_info_t *h = (ctlr_info_t*)tdata;
-
-	h->timer.expires = jiffies + IDA_TIMER;
-	add_timer(&h->timer);
-	h->misc_tflags = 0;
-}
-
-static int ida_getgeo(struct block_device *bdev, struct hd_geometry *geo)
-{
-	drv_info_t *drv = get_drv(bdev->bd_disk);
-
-	if (drv->cylinders) {
-		geo->heads = drv->heads;
-		geo->sectors = drv->sectors;
-		geo->cylinders = drv->cylinders;
-	} else {
-		geo->heads = 0xff;
-		geo->sectors = 0x3f;
-		geo->cylinders = drv->nr_blks / (0xff*0x3f);
-	}
-
-	return 0;
-}
-
-/*
- *  ida_ioctl does some miscellaneous stuff like reporting drive geometry,
- *  setting readahead and submitting commands from userspace to the controller.
- */
-static int ida_locked_ioctl(struct block_device *bdev, fmode_t mode, unsigned int cmd, unsigned long arg)
-{
-	drv_info_t *drv = get_drv(bdev->bd_disk);
-	ctlr_info_t *host = get_host(bdev->bd_disk);
-	int error;
-	ida_ioctl_t __user *io = (ida_ioctl_t __user *)arg;
-	ida_ioctl_t *my_io;
-
-	switch(cmd) {
-	case IDAGETDRVINFO:
-		if (copy_to_user(&io->c.drv, drv, sizeof(drv_info_t)))
-			return -EFAULT;
-		return 0;
-	case IDAPASSTHRU:
-		if (!capable(CAP_SYS_RAWIO))
-			return -EPERM;
-		my_io = kmalloc(sizeof(ida_ioctl_t), GFP_KERNEL);
-		if (!my_io)
-			return -ENOMEM;
-		error = -EFAULT;
-		if (copy_from_user(my_io, io, sizeof(*my_io)))
-			goto out_passthru;
-		error = ida_ctlr_ioctl(host, drv - host->drv, my_io);
-		if (error)
-			goto out_passthru;
-		error = -EFAULT;
-		if (copy_to_user(io, my_io, sizeof(*my_io)))
-			goto out_passthru;
-		error = 0;
-out_passthru:
-		kfree(my_io);
-		return error;
-	case IDAGETCTLRSIG:
-		if (!arg) return -EINVAL;
-		if (put_user(host->ctlr_sig, (int __user *)arg))
-			return -EFAULT;
-		return 0;
-	case IDAREVALIDATEVOLS:
-		if (MINOR(bdev->bd_dev) != 0)
-			return -ENXIO;
-		return revalidate_allvol(host);
-	case IDADRIVERVERSION:
-		if (!arg) return -EINVAL;
-		if (put_user(DRIVER_VERSION, (unsigned long __user *)arg))
-			return -EFAULT;
-		return 0;
-	case IDAGETPCIINFO:
-	{
-		
-		ida_pci_info_struct pciinfo;
-
-		if (!arg) return -EINVAL;
-		memset(&pciinfo, 0, sizeof(pciinfo));
-		pciinfo.bus = host->pci_dev->bus->number;
-		pciinfo.dev_fn = host->pci_dev->devfn;
-		pciinfo.board_id = host->board_id;
-		if(copy_to_user((void __user *) arg, &pciinfo,  
-			sizeof( ida_pci_info_struct)))
-				return -EFAULT;
-		return(0);
-	}	
-
-	default:
-		return -EINVAL;
-	}
-		
-}
-
-static int ida_ioctl(struct block_device *bdev, fmode_t mode,
-			     unsigned int cmd, unsigned long param)
-{
-	int ret;
-
-	mutex_lock(&cpqarray_mutex);
-	ret = ida_locked_ioctl(bdev, mode, cmd, param);
-	mutex_unlock(&cpqarray_mutex);
-
-	return ret;
-}
-
-/*
- * ida_ctlr_ioctl is for passing commands to the controller from userspace.
- * The command block (io) has already been copied to kernel space for us,
- * however, any elements in the sglist need to be copied to kernel space
- * or copied back to userspace.
- *
- * Only root may perform a controller passthru command, however I'm not doing
- * any serious sanity checking on the arguments.  Doing an IDA_WRITE_MEDIA and
- * putting a 64M buffer in the sglist is probably a *bad* idea.
- */
-static int ida_ctlr_ioctl(ctlr_info_t *h, int dsk, ida_ioctl_t *io)
-{
-	int ctlr = h->ctlr;
-	cmdlist_t *c;
-	void *p = NULL;
-	unsigned long flags;
-	int error;
-
-	if ((c = cmd_alloc(h, 0)) == NULL)
-		return -ENOMEM;
-	c->ctlr = ctlr;
-	c->hdr.unit = (io->unit & UNITVALID) ? (io->unit & ~UNITVALID) : dsk;
-	c->hdr.size = sizeof(rblk_t) >> 2;
-	c->size += sizeof(rblk_t);
-
-	c->req.hdr.cmd = io->cmd;
-	c->req.hdr.blk = io->blk;
-	c->req.hdr.blk_cnt = io->blk_cnt;
-	c->type = CMD_IOCTL_PEND;
-
-	/* Pre submit processing */
-	switch(io->cmd) {
-	case PASSTHRU_A:
-		p = memdup_user(io->sg[0].addr, io->sg[0].size);
-		if (IS_ERR(p)) {
-			error = PTR_ERR(p);
-			cmd_free(h, c, 0);
-			return error;
-		}
-		c->req.hdr.blk = pci_map_single(h->pci_dev, &(io->c), 
-				sizeof(ida_ioctl_t), 
-				PCI_DMA_BIDIRECTIONAL);
-		c->req.sg[0].size = io->sg[0].size;
-		c->req.sg[0].addr = pci_map_single(h->pci_dev, p, 
-			c->req.sg[0].size, PCI_DMA_BIDIRECTIONAL);
-		c->req.hdr.sg_cnt = 1;
-		break;
-	case IDA_READ:
-	case READ_FLASH_ROM:
-	case SENSE_CONTROLLER_PERFORMANCE:
-		p = kmalloc(io->sg[0].size, GFP_KERNEL);
-		if (!p) 
-		{ 
-                        error = -ENOMEM; 
-                        cmd_free(h, c, 0);
-                        return(error);
-                }
-
-		c->req.sg[0].size = io->sg[0].size;
-		c->req.sg[0].addr = pci_map_single(h->pci_dev, p, 
-			c->req.sg[0].size, PCI_DMA_BIDIRECTIONAL); 
-		c->req.hdr.sg_cnt = 1;
-		break;
-	case IDA_WRITE:
-	case IDA_WRITE_MEDIA:
-	case DIAG_PASS_THRU:
-	case COLLECT_BUFFER:
-	case WRITE_FLASH_ROM:
-		p = memdup_user(io->sg[0].addr, io->sg[0].size);
-		if (IS_ERR(p)) {
-			error = PTR_ERR(p);
-			cmd_free(h, c, 0);
-			return error;
-                }
-		c->req.sg[0].size = io->sg[0].size;
-		c->req.sg[0].addr = pci_map_single(h->pci_dev, p, 
-			c->req.sg[0].size, PCI_DMA_BIDIRECTIONAL); 
-		c->req.hdr.sg_cnt = 1;
-		break;
-	default:
-		c->req.sg[0].size = sizeof(io->c);
-		c->req.sg[0].addr = pci_map_single(h->pci_dev,&io->c, 
-			c->req.sg[0].size, PCI_DMA_BIDIRECTIONAL);
-		c->req.hdr.sg_cnt = 1;
-	}
-	
-	/* Put the request on the tail of the request queue */
-	spin_lock_irqsave(IDA_LOCK(ctlr), flags);
-	addQ(&h->reqQ, c);
-	h->Qdepth++;
-	start_io(h);
-	spin_unlock_irqrestore(IDA_LOCK(ctlr), flags);
-
-	/* Wait for completion */
-	while(c->type != CMD_IOCTL_DONE)
-		schedule();
-
-	/* Unmap the DMA  */
-	pci_unmap_single(h->pci_dev, c->req.sg[0].addr, c->req.sg[0].size, 
-		PCI_DMA_BIDIRECTIONAL);
-	/* Post submit processing */
-	switch(io->cmd) {
-	case PASSTHRU_A:
-		pci_unmap_single(h->pci_dev, c->req.hdr.blk,
-                                sizeof(ida_ioctl_t),
-                                PCI_DMA_BIDIRECTIONAL);
-	case IDA_READ:
-	case DIAG_PASS_THRU:
-	case SENSE_CONTROLLER_PERFORMANCE:
-	case READ_FLASH_ROM:
-		if (copy_to_user(io->sg[0].addr, p, io->sg[0].size)) {
-			kfree(p);
-			return -EFAULT;
-		}
-		/* fall through and free p */
-	case IDA_WRITE:
-	case IDA_WRITE_MEDIA:
-	case COLLECT_BUFFER:
-	case WRITE_FLASH_ROM:
-		kfree(p);
-		break;
-	default:;
-		/* Nothing to do */
-	}
-
-	io->rcode = c->req.hdr.rcode;
-	cmd_free(h, c, 0);
-	return(0);
-}
-
-/*
- * Commands are pre-allocated in a large block.  Here we use a simple bitmap
- * scheme to suballocte them to the driver.  Operations that are not time
- * critical (and can wait for kmalloc and possibly sleep) can pass in NULL
- * as the first argument to get a new command.
- */
-static cmdlist_t * cmd_alloc(ctlr_info_t *h, int get_from_pool)
-{
-	cmdlist_t * c;
-	int i;
-	dma_addr_t cmd_dhandle;
-
-	if (!get_from_pool) {
-		c = (cmdlist_t*)pci_alloc_consistent(h->pci_dev, 
-			sizeof(cmdlist_t), &cmd_dhandle);
-		if(c==NULL)
-			return NULL;
-	} else {
-		do {
-			i = find_first_zero_bit(h->cmd_pool_bits, NR_CMDS);
-			if (i == NR_CMDS)
-				return NULL;
-		} while(test_and_set_bit(i&(BITS_PER_LONG-1), h->cmd_pool_bits+(i/BITS_PER_LONG)) != 0);
-		c = h->cmd_pool + i;
-		cmd_dhandle = h->cmd_pool_dhandle + i*sizeof(cmdlist_t);
-		h->nr_allocs++;
-	}
-
-	memset(c, 0, sizeof(cmdlist_t));
-	c->busaddr = cmd_dhandle; 
-	return c;
-}
-
-static void cmd_free(ctlr_info_t *h, cmdlist_t *c, int got_from_pool)
-{
-	int i;
-
-	if (!got_from_pool) {
-		pci_free_consistent(h->pci_dev, sizeof(cmdlist_t), c,
-			c->busaddr);
-	} else {
-		i = c - h->cmd_pool;
-		clear_bit(i&(BITS_PER_LONG-1), h->cmd_pool_bits+(i/BITS_PER_LONG));
-		h->nr_frees++;
-	}
-}
-
-/***********************************************************************
-    name:        sendcmd
-    Send a command to an IDA using the memory mapped FIFO interface
-    and wait for it to complete.  
-    This routine should only be called at init time.
-***********************************************************************/
-static int sendcmd(
-	__u8	cmd,
-	int	ctlr,
-	void	*buff,
-	size_t	size,
-	unsigned int blk,
-	unsigned int blkcnt,
-	unsigned int log_unit )
-{
-	cmdlist_t *c;
-	int complete;
-	unsigned long temp;
-	unsigned long i;
-	ctlr_info_t *info_p = hba[ctlr];
-
-	c = cmd_alloc(info_p, 1);
-	if(!c)
-		return IO_ERROR;
-	c->ctlr = ctlr;
-	c->hdr.unit = log_unit;
-	c->hdr.prio = 0;
-	c->hdr.size = sizeof(rblk_t) >> 2;
-	c->size += sizeof(rblk_t);
-
-	/* The request information. */
-	c->req.hdr.next = 0;
-	c->req.hdr.rcode = 0;
-	c->req.bp = 0;
-	c->req.hdr.sg_cnt = 1;
-	c->req.hdr.reserved = 0;
-	
-	if (size == 0)
-		c->req.sg[0].size = 512;
-	else
-		c->req.sg[0].size = size;
-
-	c->req.hdr.blk = blk;
-	c->req.hdr.blk_cnt = blkcnt;
-	c->req.hdr.cmd = (unsigned char) cmd;
-	c->req.sg[0].addr = (__u32) pci_map_single(info_p->pci_dev, 
-		buff, c->req.sg[0].size, PCI_DMA_BIDIRECTIONAL);
-	/*
-	 * Disable interrupt
-	 */
-	info_p->access.set_intr_mask(info_p, 0);
-	/* Make sure there is room in the command FIFO */
-	/* Actually it should be completely empty at this time. */
-	for (i = 200000; i > 0; i--) {
-		temp = info_p->access.fifo_full(info_p);
-		if (temp != 0) {
-			break;
-		}
-		udelay(10);
-DBG(
-		printk(KERN_WARNING "cpqarray ida%d: idaSendPciCmd FIFO full,"
-			" waiting!\n", ctlr);
-);
-	} 
-	/*
-	 * Send the cmd
-	 */
-	info_p->access.submit_command(info_p, c);
-	complete = pollcomplete(ctlr);
-	
-	pci_unmap_single(info_p->pci_dev, (dma_addr_t) c->req.sg[0].addr, 
-		c->req.sg[0].size, PCI_DMA_BIDIRECTIONAL);
-	if (complete != 1) {
-		if (complete != c->busaddr) {
-			printk( KERN_WARNING
-			"cpqarray ida%d: idaSendPciCmd "
-		      "Invalid command list address returned! (%08lx)\n",
-				ctlr, (unsigned long)complete);
-			cmd_free(info_p, c, 1);
-			return (IO_ERROR);
-		}
-	} else {
-		printk( KERN_WARNING
-			"cpqarray ida%d: idaSendPciCmd Timeout out, "
-			"No command list address returned!\n",
-			ctlr);
-		cmd_free(info_p, c, 1);
-		return (IO_ERROR);
-	}
-
-	if (c->req.hdr.rcode & 0x00FE) {
-		if (!(c->req.hdr.rcode & BIG_PROBLEM)) {
-			printk( KERN_WARNING
-			"cpqarray ida%d: idaSendPciCmd, error: "
-				"Controller failed at init time "
-				"cmd: 0x%x, return code = 0x%x\n",
-				ctlr, c->req.hdr.cmd, c->req.hdr.rcode);
-
-			cmd_free(info_p, c, 1);
-			return (IO_ERROR);
-		}
-	}
-	cmd_free(info_p, c, 1);
-	return (IO_OK);
-}
-
-/*
- * revalidate_allvol is for online array config utilities.  After a
- * utility reconfigures the drives in the array, it can use this function
- * (through an ioctl) to make the driver zap any previous disk structs for
- * that controller and get new ones.
- *
- * Right now I'm using the getgeometry() function to do this, but this
- * function should probably be finer grained and allow you to revalidate one
- * particualar logical volume (instead of all of them on a particular
- * controller).
- */
-static int revalidate_allvol(ctlr_info_t *host)
-{
-	int ctlr = host->ctlr;
-	int i;
-	unsigned long flags;
-
-	spin_lock_irqsave(IDA_LOCK(ctlr), flags);
-	if (host->usage_count > 1) {
-		spin_unlock_irqrestore(IDA_LOCK(ctlr), flags);
-		printk(KERN_WARNING "cpqarray: Device busy for volume"
-			" revalidation (usage=%d)\n", host->usage_count);
-		return -EBUSY;
-	}
-	host->usage_count++;
-	spin_unlock_irqrestore(IDA_LOCK(ctlr), flags);
-
-	/*
-	 * Set the partition and block size structures for all volumes
-	 * on this controller to zero.  We will reread all of this data
-	 */
-	set_capacity(ida_gendisk[ctlr][0], 0);
-	for (i = 1; i < NWD; i++) {
-		struct gendisk *disk = ida_gendisk[ctlr][i];
-		if (disk->flags & GENHD_FL_UP)
-			del_gendisk(disk);
-	}
-	memset(host->drv, 0, sizeof(drv_info_t)*NWD);
-
-	/*
-	 * Tell the array controller not to give us any interrupts while
-	 * we check the new geometry.  Then turn interrupts back on when
-	 * we're done.
-	 */
-	host->access.set_intr_mask(host, 0);
-	getgeometry(ctlr);
-	host->access.set_intr_mask(host, FIFO_NOT_EMPTY);
-
-	for(i=0; i<NWD; i++) {
-		struct gendisk *disk = ida_gendisk[ctlr][i];
-		drv_info_t *drv = &host->drv[i];
-		if (i && !drv->nr_blks)
-			continue;
-		blk_queue_logical_block_size(host->queue, drv->blk_size);
-		set_capacity(disk, drv->nr_blks);
-		disk->queue = host->queue;
-		disk->private_data = drv;
-		if (i)
-			add_disk(disk);
-	}
-
-	host->usage_count--;
-	return 0;
-}
-
-static int ida_revalidate(struct gendisk *disk)
-{
-	drv_info_t *drv = disk->private_data;
-	set_capacity(disk, drv->nr_blks);
-	return 0;
-}
-
-/********************************************************************
-    name: pollcomplete
-    Wait polling for a command to complete.
-    The memory mapped FIFO is polled for the completion.
-    Used only at init time, interrupts disabled.
- ********************************************************************/
-static int pollcomplete(int ctlr)
-{
-	int done;
-	int i;
-
-	/* Wait (up to 2 seconds) for a command to complete */
-
-	for (i = 200000; i > 0; i--) {
-		done = hba[ctlr]->access.command_completed(hba[ctlr]);
-		if (done == 0) {
-			udelay(10);	/* a short fixed delay */
-		} else
-			return (done);
-	}
-	/* Invalid address to tell caller we ran out of time */
-	return 1;
-}
-/*****************************************************************
-    start_fwbk
-    Starts controller firmwares background processing. 
-    Currently only the Integrated Raid controller needs this done.
-    If the PCI mem address registers are written to after this, 
-	 data corruption may occur
-*****************************************************************/
-static void start_fwbk(int ctlr)
-{
-		id_ctlr_t *id_ctlr_buf; 
-	int ret_code;
-
-	if(	(hba[ctlr]->board_id != 0x40400E11)
-		&& (hba[ctlr]->board_id != 0x40480E11) )
-
-	/* Not a Integrated Raid, so there is nothing for us to do */
-		return;
-	printk(KERN_DEBUG "cpqarray: Starting firmware's background"
-		" processing\n");
-	/* Command does not return anything, but idasend command needs a 
-		buffer */
-	id_ctlr_buf = kmalloc(sizeof(id_ctlr_t), GFP_KERNEL);
-	if(id_ctlr_buf==NULL)
-	{
-		printk(KERN_WARNING "cpqarray: Out of memory. "
-			"Unable to start background processing.\n");
-		return;
-	}		
-	ret_code = sendcmd(RESUME_BACKGROUND_ACTIVITY, ctlr, 
-		id_ctlr_buf, 0, 0, 0, 0);
-	if(ret_code != IO_OK)
-		printk(KERN_WARNING "cpqarray: Unable to start"
-			" background processing\n");
-
-	kfree(id_ctlr_buf);
-}
-/*****************************************************************
-    getgeometry
-    Get ida logical volume geometry from the controller 
-    This is a large bit of code which once existed in two flavors,
-    It is used only at init time.
-*****************************************************************/
-static void getgeometry(int ctlr)
-{				
-	id_log_drv_t *id_ldrive;
-	id_ctlr_t *id_ctlr_buf;
-	sense_log_drv_stat_t *id_lstatus_buf;
-	config_t *sense_config_buf;
-	unsigned int log_unit, log_index;
-	int ret_code, size;
-	drv_info_t *drv;
-	ctlr_info_t *info_p = hba[ctlr];
-	int i;
-
-	info_p->log_drv_map = 0;	
-	
-	id_ldrive = kzalloc(sizeof(id_log_drv_t), GFP_KERNEL);
-	if (!id_ldrive)	{
-		printk( KERN_ERR "cpqarray:  out of memory.\n");
-		goto err_0;
-	}
-
-	id_ctlr_buf = kzalloc(sizeof(id_ctlr_t), GFP_KERNEL);
-	if (!id_ctlr_buf) {
-		printk( KERN_ERR "cpqarray:  out of memory.\n");
-		goto err_1;
-	}
-
-	id_lstatus_buf = kzalloc(sizeof(sense_log_drv_stat_t), GFP_KERNEL);
-	if (!id_lstatus_buf) {
-		printk( KERN_ERR "cpqarray:  out of memory.\n");
-		goto err_2;
-	}
-
-	sense_config_buf = kzalloc(sizeof(config_t), GFP_KERNEL);
-	if (!sense_config_buf) {
-		printk( KERN_ERR "cpqarray:  out of memory.\n");
-		goto err_3;
-	}
-
-	info_p->phys_drives = 0;
-	info_p->log_drv_map = 0;
-	info_p->drv_assign_map = 0;
-	info_p->drv_spare_map = 0;
-	info_p->mp_failed_drv_map = 0;	/* only initialized here */
-	/* Get controllers info for this logical drive */
-	ret_code = sendcmd(ID_CTLR, ctlr, id_ctlr_buf, 0, 0, 0, 0);
-	if (ret_code == IO_ERROR) {
-		/*
-		 * If can't get controller info, set the logical drive map to 0,
-		 * so the idastubopen will fail on all logical drives
-		 * on the controller.
-		 */
-		printk(KERN_ERR "cpqarray: error sending ID controller\n");
-                goto err_4;
-        }
-
-	info_p->log_drives = id_ctlr_buf->nr_drvs;
-	for(i=0;i<4;i++)
-		info_p->firm_rev[i] = id_ctlr_buf->firm_rev[i];
-	info_p->ctlr_sig = id_ctlr_buf->cfg_sig;
-
-	printk(" (%s)\n", info_p->product_name);
-	/*
-	 * Initialize logical drive map to zero
-	 */
-	log_index = 0;
-	/*
-	 * Get drive geometry for all logical drives
-	 */
-	if (id_ctlr_buf->nr_drvs > 16)
-		printk(KERN_WARNING "cpqarray ida%d:  This driver supports "
-			"16 logical drives per controller.\n.  "
-			" Additional drives will not be "
-			"detected\n", ctlr);
-
-	for (log_unit = 0;
-	     (log_index < id_ctlr_buf->nr_drvs)
-	     && (log_unit < NWD);
-	     log_unit++) {
-		size = sizeof(sense_log_drv_stat_t);
-
-		/*
-		   Send "Identify logical drive status" cmd
-		 */
-		ret_code = sendcmd(SENSE_LOG_DRV_STAT,
-			     ctlr, id_lstatus_buf, size, 0, 0, log_unit);
-		if (ret_code == IO_ERROR) {
-			/*
-			   If can't get logical drive status, set
-			   the logical drive map to 0, so the
-			   idastubopen will fail for all logical drives
-			   on the controller. 
-			 */
-			info_p->log_drv_map = 0;	
-			printk( KERN_WARNING
-			     "cpqarray ida%d: idaGetGeometry - Controller"
-				" failed to report status of logical drive %d\n"
-			 "Access to this controller has been disabled\n",
-				ctlr, log_unit);
-                	goto err_4;
-		}
-		/*
-		   Make sure the logical drive is configured
-		 */
-		if (id_lstatus_buf->status != LOG_NOT_CONF) {
-			ret_code = sendcmd(ID_LOG_DRV, ctlr, id_ldrive,
-			       sizeof(id_log_drv_t), 0, 0, log_unit);
-			/*
-			   If error, the bit for this
-			   logical drive won't be set and
-			   idastubopen will return error. 
-			 */
-			if (ret_code != IO_ERROR) {
-				drv = &info_p->drv[log_unit];
-				drv->blk_size = id_ldrive->blk_size;
-				drv->nr_blks = id_ldrive->nr_blks;
-				drv->cylinders = id_ldrive->drv.cyl;
-				drv->heads = id_ldrive->drv.heads;
-				drv->sectors = id_ldrive->drv.sect_per_track;
-				info_p->log_drv_map |=	(1 << log_unit);
-
-	printk(KERN_INFO "cpqarray ida/c%dd%d: blksz=%d nr_blks=%d\n",
-		ctlr, log_unit, drv->blk_size, drv->nr_blks);
-				ret_code = sendcmd(SENSE_CONFIG,
-						  ctlr, sense_config_buf,
-				 sizeof(config_t), 0, 0, log_unit);
-				if (ret_code == IO_ERROR) {
-					info_p->log_drv_map = 0;
-                			printk(KERN_ERR "cpqarray: error sending sense config\n");
-                			goto err_4;
-				}
-
-				info_p->phys_drives =
-				    sense_config_buf->ctlr_phys_drv;
-				info_p->drv_assign_map
-				    |= sense_config_buf->drv_asgn_map;
-				info_p->drv_assign_map
-				    |= sense_config_buf->spare_asgn_map;
-				info_p->drv_spare_map
-				    |= sense_config_buf->spare_asgn_map;
-			}	/* end of if no error on id_ldrive */
-			log_index = log_index + 1;
-		}		/* end of if logical drive configured */
-	}			/* end of for log_unit */
-
-	/* Free all the buffers and return */
-err_4:
-	kfree(sense_config_buf);
-err_3:
-  	kfree(id_lstatus_buf);
-err_2:
-	kfree(id_ctlr_buf);
-err_1:
-  	kfree(id_ldrive);
-err_0:
-	return;
-}
-
-static void __exit cpqarray_exit(void)
-{
-	int i;
-
-	pci_unregister_driver(&cpqarray_pci_driver);
-
-	/* Double check that all controller entries have been removed */
-	for(i=0; i<MAX_CTLR; i++) {
-		if (hba[i] != NULL) {
-			printk(KERN_WARNING "cpqarray: Removing EISA "
-					"controller %d\n", i);
-			cpqarray_remove_one_eisa(i);
-		}
-	}
-
-	remove_proc_entry("driver/cpqarray", NULL);
-}
-
-module_init(cpqarray_init)
-module_exit(cpqarray_exit)
diff --git a/drivers/block/cpqarray.h b/drivers/block/cpqarray.h
deleted file mode 100644
index be73e9d579c5..000000000000
--- a/drivers/block/cpqarray.h
+++ /dev/null
@@ -1,126 +0,0 @@
-/*
- *    Disk Array driver for Compaq SMART2 Controllers
- *    Copyright 1998 Compaq Computer Corporation
- *
- *    This program is free software; you can redistribute it and/or modify
- *    it under the terms of the GNU General Public License as published by
- *    the Free Software Foundation; either version 2 of the License, or
- *    (at your option) any later version.
- *
- *    This program is distributed in the hope that it will be useful,
- *    but WITHOUT ANY WARRANTY; without even the implied warranty of
- *    MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
- *    NON INFRINGEMENT.  See the GNU General Public License for more details.
- *
- *    You should have received a copy of the GNU General Public License
- *    along with this program; if not, write to the Free Software
- *    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- *    Questions/Comments/Bugfixes to iss_storagedev@hp.com
- *
- *    If you want to make changes, improve or add functionality to this
- *    driver, you'll probably need the Compaq Array Controller Interface
- *    Specificiation (Document number ECG086/1198)
- */
-#ifndef CPQARRAY_H
-#define CPQARRAY_H
-
-#ifdef __KERNEL__
-#include <linux/blkdev.h>
-#include <linux/slab.h>
-#include <linux/proc_fs.h>
-#include <linux/timer.h>
-#endif
-
-#include "ida_cmd.h"
-
-#define IO_OK		0
-#define IO_ERROR	1
-#define NWD		16
-#define NWD_SHIFT	4
-
-#define IDA_TIMER	(5*HZ)
-#define IDA_TIMEOUT	(10*HZ)
-
-#define MISC_NONFATAL_WARN	0x01
-
-typedef struct {
-	unsigned blk_size;
-	unsigned nr_blks;
-	unsigned cylinders;
-	unsigned heads;
-	unsigned sectors;
-	int usage_count;
-} drv_info_t;
-
-#ifdef __KERNEL__
-
-struct ctlr_info;
-typedef struct ctlr_info ctlr_info_t;
-
-struct access_method {
-	void (*submit_command)(ctlr_info_t *h, cmdlist_t *c);
-	void (*set_intr_mask)(ctlr_info_t *h, unsigned long val);
-	unsigned long (*fifo_full)(ctlr_info_t *h);
-	unsigned long (*intr_pending)(ctlr_info_t *h);
-	unsigned long (*command_completed)(ctlr_info_t *h);
-};
-
-struct board_type {
-	__u32	board_id;
-	char	*product_name;
-	struct access_method *access;
-};
-
-struct ctlr_info {
-	int	ctlr;
-	char	devname[8];
-	__u32	log_drv_map;
-	__u32	drv_assign_map;
-	__u32	drv_spare_map;
-	__u32	mp_failed_drv_map;
-
-	char	firm_rev[4];
-	int	ctlr_sig;
-
-	int	log_drives;
-	int	phys_drives;
-
-	struct pci_dev *pci_dev;    /* NULL if EISA */
-	__u32	board_id;
-	char	*product_name;	
-
-	void __iomem *vaddr;
-	unsigned long paddr;
-	unsigned long io_mem_addr;
-	unsigned long io_mem_length;
-	int	intr;
-	int	usage_count;
-	drv_info_t	drv[NWD];
-	struct proc_dir_entry *proc;
-
-	struct access_method access;
-
-	cmdlist_t *reqQ;
-	cmdlist_t *cmpQ;
-	cmdlist_t *cmd_pool;
-	dma_addr_t cmd_pool_dhandle;
-	unsigned long *cmd_pool_bits;
-	struct request_queue *queue;
-	spinlock_t lock;
-
-	unsigned int Qdepth;
-	unsigned int maxQsinceinit;
-
-	unsigned int nr_requests;
-	unsigned int nr_allocs;
-	unsigned int nr_frees;
-	struct timer_list timer;
-	unsigned int misc_tflags;
-};
-
-#define IDA_LOCK(i)	(&hba[i]->lock)
-
-#endif
-
-#endif /* CPQARRAY_H */
diff --git a/drivers/block/ida_cmd.h b/drivers/block/ida_cmd.h
deleted file mode 100644
index 98b5746b3089..000000000000
--- a/drivers/block/ida_cmd.h
+++ /dev/null
@@ -1,349 +0,0 @@
-/*
- *    Disk Array driver for Compaq SMART2 Controllers
- *    Copyright 1998 Compaq Computer Corporation
- *
- *    This program is free software; you can redistribute it and/or modify
- *    it under the terms of the GNU General Public License as published by
- *    the Free Software Foundation; either version 2 of the License, or
- *    (at your option) any later version.
- *
- *    This program is distributed in the hope that it will be useful,
- *    but WITHOUT ANY WARRANTY; without even the implied warranty of
- *    MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
- *    NON INFRINGEMENT.  See the GNU General Public License for more details.
- *
- *    You should have received a copy of the GNU General Public License
- *    along with this program; if not, write to the Free Software
- *    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- *    Questions/Comments/Bugfixes to iss_storagedev@hp.com
- *
- */
-#ifndef ARRAYCMD_H
-#define ARRAYCMD_H
-
-#include <asm/types.h>
-#if 0
-#include <linux/blkdev.h>
-#endif
-
-/* for the Smart Array 42XX cards */
-#define S42XX_REQUEST_PORT_OFFSET	0x40
-#define S42XX_REPLY_INTR_MASK_OFFSET	0x34
-#define S42XX_REPLY_PORT_OFFSET		0x44
-#define S42XX_INTR_STATUS		0x30
-
-#define S42XX_INTR_OFF		0x08
-#define S42XX_INTR_PENDING	0x08
-
-#define COMMAND_FIFO		0x04
-#define COMMAND_COMPLETE_FIFO	0x08
-#define INTR_MASK		0x0C
-#define INTR_STATUS		0x10
-#define INTR_PENDING		0x14
-
-#define FIFO_NOT_EMPTY		0x01
-#define FIFO_NOT_FULL		0x02
-
-#define BIG_PROBLEM		0x40
-#define LOG_NOT_CONF		2
-
-#pragma pack(1)
-typedef struct {
-	__u32	size;
-	__u32	addr;
-} sg_t;
-
-#define RCODE_NONFATAL	0x02
-#define RCODE_FATAL	0x04
-#define RCODE_INVREQ	0x10
-typedef struct {
-	__u16	next;
-	__u8	cmd;
-	__u8	rcode;
-	__u32	blk;
-	__u16	blk_cnt;
-	__u8	sg_cnt;
-	__u8	reserved;
-} rhdr_t;
-
-#define SG_MAX			32
-typedef struct {
-	rhdr_t	hdr;
-	sg_t	sg[SG_MAX];
-	__u32	bp;
-} rblk_t;
-
-typedef struct {
-	__u8	unit;
-	__u8	prio;
-	__u16	size;
-} chdr_t;
-
-#define CMD_RWREQ	0x00
-#define CMD_IOCTL_PEND	0x01
-#define CMD_IOCTL_DONE	0x02
-
-typedef struct cmdlist {
-	chdr_t	hdr;
-	rblk_t	req;
-	__u32	size;
-	int	retry_cnt;
-	__u32	busaddr;
-	int	ctlr;
-	struct cmdlist *prev;
-	struct cmdlist *next;
-	struct request *rq;
-	int type;
-} cmdlist_t;
-	
-#define ID_CTLR		0x11
-typedef struct {
-	__u8	nr_drvs;
-	__u32	cfg_sig;
-	__u8	firm_rev[4];
-	__u8	rom_rev[4];
-	__u8	hw_rev;
-	__u32	bb_rev;
-	__u32	drv_present_map;
-	__u32	ext_drv_map;
-	__u32	board_id;
-	__u8	cfg_error;
-	__u32	non_disk_bits;
-	__u8	bad_ram_addr;
-	__u8	cpu_rev;
-	__u8	pdpi_rev;
-	__u8	epic_rev;
-	__u8	wcxc_rev;
-	__u8	marketing_rev;
-	__u8	ctlr_flags;
-	__u8	host_flags;
-	__u8	expand_dis;
-	__u8	scsi_chips;
-	__u32	max_req_blocks;
-	__u32	ctlr_clock;
-	__u8	drvs_per_bus;
-	__u16	big_drv_present_map[8];
-	__u16	big_ext_drv_map[8];
-	__u16	big_non_disk_map[8];
-	__u16	task_flags;
-	__u8	icl_bus;
-	__u8	red_modes;
-	__u8	cur_red_mode;
-	__u8	red_ctlr_stat;
-	__u8	red_fail_reason;
-	__u8	reserved[403];
-} id_ctlr_t;
-
-typedef struct {
-	__u16	cyl;
-	__u8	heads;
-	__u8	xsig;
-	__u8	psectors;
-	__u16	wpre;
-	__u8	maxecc;
-	__u8	drv_ctrl;
-	__u16	pcyls;
-	__u8	pheads;
-	__u16	landz;
-	__u8	sect_per_track;
-	__u8	cksum;
-} drv_param_t;
-
-#define ID_LOG_DRV	0x10
-typedef struct {
-	__u16	blk_size;
-	__u32	nr_blks;
-	drv_param_t drv;
-	__u8	fault_tol;
-	__u8	reserved;
-	__u8	bios_disable;
-} id_log_drv_t;
-
-#define ID_LOG_DRV_EXT	0x18
-typedef struct {
-	__u32	log_drv_id;
-	__u8	log_drv_label[64];
-	__u8	reserved[418];
-} id_log_drv_ext_t;
-
-#define SENSE_LOG_DRV_STAT	0x12
-typedef struct {
-	__u8	status;
-	__u32	fail_map;
-	__u16	read_err[32];
-	__u16	write_err[32];
-	__u8	drv_err_data[256];
-	__u8	drq_timeout[32];
-	__u32	blks_to_recover;
-	__u8	drv_recovering;
-	__u16	remap_cnt[32];
-	__u32	replace_drv_map;
-	__u32	act_spare_map;
-	__u8	spare_stat;
-	__u8	spare_repl_map[32];
-	__u32	repl_ok_map;
-	__u8	media_exch;
-	__u8	cache_fail;
-	__u8	expn_fail;
-	__u8	unit_flags;
-	__u16	big_fail_map[8];
-	__u16	big_remap_map[128];
-	__u16	big_repl_map[8];
-	__u16	big_act_spare_map[8];
-	__u8	big_spar_repl_map[128];
-	__u16	big_repl_ok_map[8];
-	__u8	big_drv_rebuild;
-	__u8	reserved[36];
-} sense_log_drv_stat_t;
-
-#define START_RECOVER		0x13
-
-#define ID_PHYS_DRV		0x15
-typedef struct {
-	__u8	scsi_bus;
-	__u8	scsi_id;
-	__u16	blk_size;
-	__u32	nr_blks;
-	__u32	rsvd_blks;
-	__u8	drv_model[40];
-	__u8	drv_sn[40];
-	__u8	drv_fw[8];
-	__u8	scsi_iq_bits;
-	__u8	compaq_drv_stmp;
-	__u8	last_fail;
-	__u8	phys_drv_flags;
-	__u8	phys_drv_flags1;
-	__u8	scsi_lun;
-	__u8	phys_drv_flags2;
-	__u8	reserved;
-	__u32	spi_speed_rules;
-	__u8	phys_connector[2];
-	__u8	phys_box_on_bus;
-	__u8	phys_bay_in_box;
-} id_phys_drv_t;
-
-#define BLINK_DRV_LEDS		0x16
-typedef struct {
-	__u32	blink_duration;
-	__u32	reserved;
-	__u8	blink[256];
-	__u8	reserved1[248];
-} blink_drv_leds_t;
-
-#define SENSE_BLINK_LEDS	0x17
-typedef struct {
-	__u32	blink_duration;
-	__u32	btime_elap;
-	__u8	blink[256];
-	__u8	reserved1[248];
-} sense_blink_leds_t;
-
-#define IDA_READ		0x20
-#define IDA_WRITE		0x30
-#define IDA_WRITE_MEDIA		0x31
-#define RESET_TO_DIAG		0x40
-#define DIAG_PASS_THRU		0x41
-
-#define SENSE_CONFIG		0x50
-#define SET_CONFIG		0x51
-typedef struct {
-	__u32	cfg_sig;
-	__u16	compat_port;
-	__u8	data_dist_mode;
-	__u8	surf_an_ctrl;
-	__u16	ctlr_phys_drv;
-	__u16	log_unit_phys_drv;
-	__u16	fault_tol_mode;
-	__u8	phys_drv_param[16];
-	drv_param_t drv;
-	__u32	drv_asgn_map;
-	__u16	dist_factor;
-	__u32	spare_asgn_map;
-	__u8	reserved[6];
-	__u16	os;
-	__u8	ctlr_order;
-	__u8	extra_info;
-	__u32	data_offs;
-	__u8	parity_backedout_write_drvs;
-	__u8	parity_dist_mode;
-	__u8	parity_shift_fact;
-	__u8	bios_disable_flag;
-	__u32	blks_on_vol;
-	__u32	blks_per_drv;
-	__u8	scratch[16];
-	__u16	big_drv_map[8];
-	__u16	big_spare_map[8];
-	__u8	ss_source_vol;
-	__u8	mix_drv_cap_range;
-	struct {
-		__u16	big_drv_map[8];
-		__u32	blks_per_drv;
-		__u16	fault_tol_mode;
-		__u16	dist_factor;
-	} MDC_range[4];
-	__u8	reserved1[248];
-} config_t;
-
-#define BYPASS_VOL_STATE	0x52
-#define SS_CREATE_VOL		0x53
-#define CHANGE_CONFIG		0x54
-#define SENSE_ORIG_CONF		0x55
-#define REORDER_LOG_DRV		0x56
-typedef struct {
-	__u8	old_units[32];
-} reorder_log_drv_t;
-
-#define LABEL_LOG_DRV		0x57
-typedef struct {
-	__u8	log_drv_label[64];
-} label_log_drv_t;
-
-#define SS_TO_VOL		0x58
-	
-#define SET_SURF_DELAY		0x60
-typedef struct {
-	__u16	delay;
-	__u8	reserved[510];
-} surf_delay_t;
-
-#define SET_OVERHEAT_DELAY	0x61
-typedef struct {
-	__u16	delay;
-} overhead_delay_t;
- 
-#define SET_MP_DELAY
-typedef struct {
-	__u16	delay;
-	__u8	reserved[510];
-} mp_delay_t;
-
-#define PASSTHRU_A	0x91
-typedef struct {
-	__u8	target;
-	__u8	bus;
-	__u8	lun;
-	__u32	timeout;
-	__u32	flags;
-	__u8	status;
-	__u8	error;
-	__u8	cdb_len;
-	__u8	sense_error;
-	__u8	sense_key;
-	__u32	sense_info;
-	__u8	sense_code;
-	__u8	sense_qual;
-	__u32	residual;
-	__u8	reserved[4];
-	__u8	cdb[12];	
-} scsi_param_t;
-
-#define RESUME_BACKGROUND_ACTIVITY	0x99
-#define SENSE_CONTROLLER_PERFORMANCE	0xa8
-#define FLUSH_CACHE			0xc2
-#define COLLECT_BUFFER			0xd2
-#define READ_FLASH_ROM			0xf6
-#define WRITE_FLASH_ROM			0xf7
-#pragma pack()	
-
-#endif /* ARRAYCMD_H */
diff --git a/drivers/block/ida_ioctl.h b/drivers/block/ida_ioctl.h
deleted file mode 100644
index 888fff9caed0..000000000000
--- a/drivers/block/ida_ioctl.h
+++ /dev/null
@@ -1,87 +0,0 @@
-/*
- *    Disk Array driver for Compaq SMART2 Controllers
- *    Copyright 1998 Compaq Computer Corporation
- *
- *    This program is free software; you can redistribute it and/or modify
- *    it under the terms of the GNU General Public License as published by
- *    the Free Software Foundation; either version 2 of the License, or
- *    (at your option) any later version.
- *
- *    This program is distributed in the hope that it will be useful,
- *    but WITHOUT ANY WARRANTY; without even the implied warranty of
- *    MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
- *    NON INFRINGEMENT.  See the GNU General Public License for more details.
- *
- *    You should have received a copy of the GNU General Public License
- *    along with this program; if not, write to the Free Software
- *    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- *    Questions/Comments/Bugfixes to iss_storagedev@hp.com
- *
- */
-#ifndef IDA_IOCTL_H
-#define IDA_IOCTL_H
-
-#include "ida_cmd.h"
-#include "cpqarray.h"
-
-#define IDAGETDRVINFO		0x27272828
-#define IDAPASSTHRU		0x28282929
-#define IDAGETCTLRSIG		0x29293030
-#define IDAREVALIDATEVOLS	0x30303131
-#define IDADRIVERVERSION	0x31313232
-#define IDAGETPCIINFO		0x32323333
-
-typedef struct _ida_pci_info_struct
-{
-	unsigned char 	bus;
-	unsigned char 	dev_fn;
-	__u32 		board_id;
-} ida_pci_info_struct;
-/*
- * Normally, the ioctl determines the logical unit for this command by
- * the major,minor number of the fd passed to ioctl.  If you need to send
- * a command to a different/nonexistant unit (such as during config), you
- * can override the normal behavior by setting the unit valid bit. (Normally,
- * it should be zero) The controller the command is sent to is still
- * determined by the major number of the open device.
- */
-
-#define UNITVALID	0x80
-typedef struct {
-	__u8	cmd;
-	__u8	rcode;
-	__u8	unit;
-	__u32	blk;
-	__u16	blk_cnt;
-
-/* currently, sg_cnt is assumed to be 1: only the 0th element of sg is used */
-	struct {
-		void	__user *addr;
-		size_t	size;
-	} sg[SG_MAX];
-	int	sg_cnt;
-
-	union ctlr_cmds {
-		drv_info_t		drv;
-		unsigned char		buf[1024];
-
-		id_ctlr_t		id_ctlr;
-		drv_param_t		drv_param;
-		id_log_drv_t		id_log_drv;
-		id_log_drv_ext_t	id_log_drv_ext;
-		sense_log_drv_stat_t	sense_log_drv_stat;
-		id_phys_drv_t		id_phys_drv;
-		blink_drv_leds_t	blink_drv_leds;
-		sense_blink_leds_t	sense_blink_leds;
-		config_t		config;
-		reorder_log_drv_t	reorder_log_drv;
-		label_log_drv_t		label_log_drv;
-		surf_delay_t		surf_delay;
-		overhead_delay_t	overhead_delay;
-		mp_delay_t		mp_delay;
-		scsi_param_t		scsi_param;
-	} c;
-} ida_ioctl_t;
-
-#endif /* IDA_IOCTL_H */