Merge tag 'usb-3.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB updates from Greg KH:
 "Here's the big USB patchset for 3.18-rc1.  Also in here is the PHY
  tree, as it seems to fit well with the USB tree for various reasons...

  Anyway, lots of little changes in here, all over the place, full
  details in the changelog

  All have been in the linux-next tree for a while with no issues"

* tag 'usb-3.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (244 commits)
  USB: host: st: fix typo 'CONFIG_USB_EHCI_HCD_ST'
  uas: Reduce number of function arguments for uas_alloc_foo functions
  xhci: Allow xHCI drivers to be built as separate modules
  xhci: Export symbols used by host-controller drivers
  xhci: Check for XHCI_COMP_MODE_QUIRK when disabling D3cold
  xhci: Introduce xhci_init_driver()
  usb: hcd: add generic PHY support
  usb: rename phy to usb_phy in HCD
  usb: gadget: uvc: fix up uvcg_v4l2_get_unmapped_area typo
  USB: host: st: fix ehci/ohci driver selection
  usb: host: ehci-exynos: Remove unnecessary usb-phy support
  usb: core: return -ENOTSUPP for all targeted hosts
  USB: Remove .owner field for driver
  usb: core: log higher level message on malformed LANGID descriptor
  usb: Add LED triggers for USB activity
  usb: Rename usb-common.c
  usb: gadget: Refactor request completion
  usb: gadget: Introduce usb_gadget_giveback_request()
  usb: dwc2/gadget: move phy bus legth initialization
  phy: remove .owner field for drivers using module_platform_driver
  ...

222 files changed, 8831 insertions, 4467 deletions

diff --git a/drivers/net/usb/usbnet.c b/drivers/net/usb/usbnet.c
index 5173821a9575..20615bbd693b 100644
--- a/drivers/net/usb/usbnet.c
+++ b/drivers/net/usb/usbnet.c
@@ -69,8 +69,9 @@
 // reawaken network queue this soon after stopping; else watchdog barks
 #define TX_TIMEOUT_JIFFIES	(5*HZ)
 
-// throttle rx/tx briefly after some faults, so khubd might disconnect()
-// us (it polls at HZ/4 usually) before we report too many false errors.
+/* throttle rx/tx briefly after some faults, so hub_wq might disconnect()
+ * us (it polls at HZ/4 usually) before we report too many false errors.
+ */
 #define THROTTLE_JIFFIES	(HZ/8)
 
 // between wakeups
@@ -595,9 +596,9 @@ static void rx_complete (struct urb *urb)
 			  "rx shutdown, code %d\n", urb_status);
 		goto block;
 
-	/* we get controller i/o faults during khubd disconnect() delays.
+	/* we get controller i/o faults during hub_wq disconnect() delays.
 	 * throttle down resubmits, to avoid log floods; just temporarily,
-	 * so we still recover when the fault isn't a khubd delay.
+	 * so we still recover when the fault isn't a hub_wq delay.
 	 */
 	case -EPROTO:
 	case -ETIME:
@@ -1185,8 +1186,9 @@ static void tx_complete (struct urb *urb)
 		case -ESHUTDOWN:		// hardware gone
 			break;
 
-		// like rx, tx gets controller i/o faults during khubd delays
-		// and so it uses the same throttling mechanism.
+		/* like rx, tx gets controller i/o faults during hub_wq
+		 * delays and so it uses the same throttling mechanism.
+		 */
 		case -EPROTO:
 		case -ETIME:
 		case -EILSEQ:
diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
index f833aa271a2e..2a436e607f99 100644
--- a/drivers/phy/Kconfig
+++ b/drivers/phy/Kconfig
@@ -48,6 +48,13 @@ config PHY_MIPHY365X
 	  Enable this to support the miphy transceiver (for SATA/PCIE)
 	  that is part of STMicroelectronics STiH41x SoC series.
 
+config PHY_RCAR_GEN2
+	tristate "Renesas R-Car generation 2 USB PHY driver"
+	depends on ARCH_SHMOBILE
+	depends on GENERIC_PHY
+	help
+	  Support for USB PHY found on Renesas R-Car generation 2 SoCs.
+
 config OMAP_CONTROL_PHY
 	tristate "OMAP CONTROL PHY Driver"
 	depends on ARCH_OMAP2PLUS || COMPILE_TEST
@@ -232,4 +239,21 @@ config PHY_XGENE
 	help
 	  This option enables support for APM X-Gene SoC multi-purpose PHY.
 
+config PHY_STIH407_USB
+	tristate "STMicroelectronics USB2 picoPHY driver for STiH407 family"
+	depends on RESET_CONTROLLER
+	depends on ARCH_STI || COMPILE_TEST
+	select GENERIC_PHY
+	help
+	  Enable this support to enable the picoPHY device used by USB2
+	  and USB3 controllers on STMicroelectronics STiH407 SoC families.
+
+config PHY_STIH41X_USB
+	tristate "STMicroelectronics USB2 PHY driver for STiH41x series"
+	depends on ARCH_STI
+	select GENERIC_PHY
+	help
+	  Enable this to support the USB transceiver that is part of
+	  STMicroelectronics STiH41x SoC series.
+
 endmenu
diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile
index 95c69ed5ed45..c4590fce082f 100644
--- a/drivers/phy/Makefile
+++ b/drivers/phy/Makefile
@@ -9,6 +9,7 @@ obj-$(CONFIG_PHY_EXYNOS_DP_VIDEO)	+= phy-exynos-dp-video.o
 obj-$(CONFIG_PHY_EXYNOS_MIPI_VIDEO)	+= phy-exynos-mipi-video.o
 obj-$(CONFIG_PHY_MVEBU_SATA)		+= phy-mvebu-sata.o
 obj-$(CONFIG_PHY_MIPHY365X)		+= phy-miphy365x.o
+obj-$(CONFIG_PHY_RCAR_GEN2)		+= phy-rcar-gen2.o
 obj-$(CONFIG_OMAP_CONTROL_PHY)		+= phy-omap-control.o
 obj-$(CONFIG_OMAP_USB2)			+= phy-omap-usb2.o
 obj-$(CONFIG_TI_PIPE3)			+= phy-ti-pipe3.o
@@ -28,3 +29,5 @@ obj-$(CONFIG_PHY_QCOM_IPQ806X_SATA)	+= phy-qcom-ipq806x-sata.o
 obj-$(CONFIG_PHY_ST_SPEAR1310_MIPHY)	+= phy-spear1310-miphy.o
 obj-$(CONFIG_PHY_ST_SPEAR1340_MIPHY)	+= phy-spear1340-miphy.o
 obj-$(CONFIG_PHY_XGENE)			+= phy-xgene.o
+obj-$(CONFIG_PHY_STIH407_USB)		+= phy-stih407-usb.o
+obj-$(CONFIG_PHY_STIH41X_USB)		+= phy-stih41x-usb.o
diff --git a/drivers/phy/phy-bcm-kona-usb2.c b/drivers/phy/phy-bcm-kona-usb2.c
index 894fe74c1e44..c1e0ca335c0e 100644
--- a/drivers/phy/phy-bcm-kona-usb2.c
+++ b/drivers/phy/phy-bcm-kona-usb2.c
@@ -143,7 +143,6 @@ static struct platform_driver bcm_kona_usb2_driver = {
 	.probe		= bcm_kona_usb2_probe,
 	.driver		= {
 		.name	= "bcm-kona-usb2",
-		.owner	= THIS_MODULE,
 		.of_match_table = bcm_kona_usb2_dt_ids,
 	},
 };
diff --git a/drivers/phy/phy-berlin-sata.c b/drivers/phy/phy-berlin-sata.c
index 5c3a0424aeb4..69ced52d72aa 100644
--- a/drivers/phy/phy-berlin-sata.c
+++ b/drivers/phy/phy-berlin-sata.c
@@ -273,7 +273,6 @@ static struct platform_driver phy_berlin_sata_driver = {
 	.probe	= phy_berlin_sata_probe,
 	.driver	= {
 		.name		= "phy-berlin-sata",
-		.owner		= THIS_MODULE,
 		.of_match_table	= phy_berlin_sata_of_match,
 	},
 };
diff --git a/drivers/phy/phy-exynos-dp-video.c b/drivers/phy/phy-exynos-dp-video.c
index 8b3026e2af7f..84f49e5a3f24 100644
--- a/drivers/phy/phy-exynos-dp-video.c
+++ b/drivers/phy/phy-exynos-dp-video.c
@@ -13,44 +13,55 @@
 #include <linux/io.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
+#include <linux/mfd/syscon.h>
+#include <linux/mfd/syscon/exynos5-pmu.h>
 #include <linux/of.h>
 #include <linux/of_address.h>
 #include <linux/phy/phy.h>
 #include <linux/platform_device.h>
+#include <linux/regmap.h>
 
-/* DPTX_PHY_CONTROL register */
-#define EXYNOS_DPTX_PHY_ENABLE		(1 << 0)
+struct exynos_dp_video_phy_drvdata {
+	u32 phy_ctrl_offset;
+};
 
 struct exynos_dp_video_phy {
-	void __iomem *regs;
+	struct regmap *regs;
+	const struct exynos_dp_video_phy_drvdata *drvdata;
 };
 
-static int __set_phy_state(struct exynos_dp_video_phy *state, unsigned int on)
+static void exynos_dp_video_phy_pwr_isol(struct exynos_dp_video_phy *state,
+							unsigned int on)
 {
-	u32 reg;
+	unsigned int val;
+
+	if (IS_ERR(state->regs))
+		return;
 
-	reg = readl(state->regs);
-	if (on)
-		reg |= EXYNOS_DPTX_PHY_ENABLE;
-	else
-		reg &= ~EXYNOS_DPTX_PHY_ENABLE;
-	writel(reg, state->regs);
+	val = on ? 0 : EXYNOS5_PHY_ENABLE;
 
-	return 0;
+	regmap_update_bits(state->regs, state->drvdata->phy_ctrl_offset,
+			   EXYNOS5_PHY_ENABLE, val);
 }
 
 static int exynos_dp_video_phy_power_on(struct phy *phy)
 {
 	struct exynos_dp_video_phy *state = phy_get_drvdata(phy);
 
-	return __set_phy_state(state, 1);
+	/* Disable power isolation on DP-PHY */
+	exynos_dp_video_phy_pwr_isol(state, 0);
+
+	return 0;
 }
 
 static int exynos_dp_video_phy_power_off(struct phy *phy)
 {
 	struct exynos_dp_video_phy *state = phy_get_drvdata(phy);
 
-	return __set_phy_state(state, 0);
+	/* Enable power isolation on DP-PHY */
+	exynos_dp_video_phy_pwr_isol(state, 1);
+
+	return 0;
 }
 
 static struct phy_ops exynos_dp_video_phy_ops = {
@@ -59,11 +70,31 @@ static struct phy_ops exynos_dp_video_phy_ops = {
 	.owner		= THIS_MODULE,
 };
 
+static const struct exynos_dp_video_phy_drvdata exynos5250_dp_video_phy = {
+	.phy_ctrl_offset	= EXYNOS5_DPTX_PHY_CONTROL,
+};
+
+static const struct exynos_dp_video_phy_drvdata exynos5420_dp_video_phy = {
+	.phy_ctrl_offset	= EXYNOS5420_DPTX_PHY_CONTROL,
+};
+
+static const struct of_device_id exynos_dp_video_phy_of_match[] = {
+	{
+		.compatible = "samsung,exynos5250-dp-video-phy",
+		.data = &exynos5250_dp_video_phy,
+	}, {
+		.compatible = "samsung,exynos5420-dp-video-phy",
+		.data = &exynos5420_dp_video_phy,
+	},
+	{ },
+};
+MODULE_DEVICE_TABLE(of, exynos_dp_video_phy_of_match);
+
 static int exynos_dp_video_phy_probe(struct platform_device *pdev)
 {
 	struct exynos_dp_video_phy *state;
 	struct device *dev = &pdev->dev;
-	struct resource *res;
+	const struct of_device_id *match;
 	struct phy_provider *phy_provider;
 	struct phy *phy;
 
@@ -71,11 +102,15 @@ static int exynos_dp_video_phy_probe(struct platform_device *pdev)
 	if (!state)
 		return -ENOMEM;
 
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-
-	state->regs = devm_ioremap_resource(dev, res);
-	if (IS_ERR(state->regs))
+	state->regs = syscon_regmap_lookup_by_phandle(dev->of_node,
+						      "samsung,pmu-syscon");
+	if (IS_ERR(state->regs)) {
+		dev_err(dev, "Failed to lookup PMU regmap\n");
 		return PTR_ERR(state->regs);
+	}
+
+	match = of_match_node(exynos_dp_video_phy_of_match, dev->of_node);
+	state->drvdata = match->data;
 
 	phy = devm_phy_create(dev, NULL, &exynos_dp_video_phy_ops, NULL);
 	if (IS_ERR(phy)) {
@@ -89,17 +124,10 @@ static int exynos_dp_video_phy_probe(struct platform_device *pdev)
 	return PTR_ERR_OR_ZERO(phy_provider);
 }
 
-static const struct of_device_id exynos_dp_video_phy_of_match[] = {
-	{ .compatible = "samsung,exynos5250-dp-video-phy" },
-	{ },
-};
-MODULE_DEVICE_TABLE(of, exynos_dp_video_phy_of_match);
-
 static struct platform_driver exynos_dp_video_phy_driver = {
 	.probe	= exynos_dp_video_phy_probe,
 	.driver = {
 		.name	= "exynos-dp-video-phy",
-		.owner	= THIS_MODULE,
 		.of_match_table	= exynos_dp_video_phy_of_match,
 	}
 };
diff --git a/drivers/phy/phy-exynos-mipi-video.c b/drivers/phy/phy-exynos-mipi-video.c
index b55a92e12496..6a9bef138617 100644
--- a/drivers/phy/phy-exynos-mipi-video.c
+++ b/drivers/phy/phy-exynos-mipi-video.c
@@ -165,7 +165,6 @@ static struct platform_driver exynos_mipi_video_phy_driver = {
 	.driver = {
 		.of_match_table	= exynos_mipi_video_phy_of_match,
 		.name  = "exynos-mipi-video-phy",
-		.owner = THIS_MODULE,
 	}
 };
 module_platform_driver(exynos_mipi_video_phy_driver);
diff --git a/drivers/phy/phy-exynos5-usbdrd.c b/drivers/phy/phy-exynos5-usbdrd.c
index 392101c8d6b0..f756aca871db 100644
--- a/drivers/phy/phy-exynos5-usbdrd.c
+++ b/drivers/phy/phy-exynos5-usbdrd.c
@@ -667,7 +667,6 @@ static struct platform_driver exynos5_usb3drd_phy = {
 	.driver = {
 		.of_match_table	= exynos5_usbdrd_phy_of_match,
 		.name		= "exynos5_usb3drd_phy",
-		.owner		= THIS_MODULE,
 	}
 };
 
diff --git a/drivers/phy/phy-exynos5250-sata.c b/drivers/phy/phy-exynos5250-sata.c
index 19a679aca4ac..54cf4ae60d29 100644
--- a/drivers/phy/phy-exynos5250-sata.c
+++ b/drivers/phy/phy-exynos5250-sata.c
@@ -240,7 +240,6 @@ static struct platform_driver exynos_sata_phy_driver = {
 	.driver = {
 		.of_match_table	= exynos_sata_phy_of_match,
 		.name  = "samsung,sata-phy",
-		.owner = THIS_MODULE,
 	}
 };
 module_platform_driver(exynos_sata_phy_driver);
diff --git a/drivers/phy/phy-hix5hd2-sata.c b/drivers/phy/phy-hix5hd2-sata.c
index 6a08fa5f81eb..d5d978085c6d 100644
--- a/drivers/phy/phy-hix5hd2-sata.c
+++ b/drivers/phy/phy-hix5hd2-sata.c
@@ -180,7 +180,6 @@ static struct platform_driver hix5hd2_sata_phy_driver = {
 	.probe	= hix5hd2_sata_phy_probe,
 	.driver = {
 		.name	= "hix5hd2-sata-phy",
-		.owner	= THIS_MODULE,
 		.of_match_table	= hix5hd2_sata_phy_of_match,
 	}
 };
diff --git a/drivers/phy/phy-miphy365x.c b/drivers/phy/phy-miphy365x.c
index e0fb7a1e5a5a..801afaf2d449 100644
--- a/drivers/phy/phy-miphy365x.c
+++ b/drivers/phy/phy-miphy365x.c
@@ -626,7 +626,6 @@ static struct platform_driver miphy365x_driver = {
 	.probe	= miphy365x_probe,
 	.driver = {
 		.name	= "miphy365x-phy",
-		.owner	= THIS_MODULE,
 		.of_match_table	= miphy365x_of_match,
 	}
 };
diff --git a/drivers/phy/phy-mvebu-sata.c b/drivers/phy/phy-mvebu-sata.c
index cc3c0e166daf..d395558cb12e 100644
--- a/drivers/phy/phy-mvebu-sata.c
+++ b/drivers/phy/phy-mvebu-sata.c
@@ -89,6 +89,8 @@ static int phy_mvebu_sata_probe(struct platform_device *pdev)
 	struct phy *phy;
 
 	priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
 
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	priv->base = devm_ioremap_resource(&pdev->dev, res);
@@ -126,7 +128,6 @@ static struct platform_driver phy_mvebu_sata_driver = {
 	.probe	= phy_mvebu_sata_probe,
 	.driver = {
 		.name	= "phy-mvebu-sata",
-		.owner	= THIS_MODULE,
 		.of_match_table	= phy_mvebu_sata_of_match,
 	}
 };
diff --git a/drivers/phy/phy-omap-control.c b/drivers/phy/phy-omap-control.c
index 9487bf112267..c96e8183a8ff 100644
--- a/drivers/phy/phy-omap-control.c
+++ b/drivers/phy/phy-omap-control.c
@@ -295,10 +295,8 @@ static int omap_control_phy_probe(struct platform_device *pdev)
 
 	control_phy = devm_kzalloc(&pdev->dev, sizeof(*control_phy),
 		GFP_KERNEL);
-	if (!control_phy) {
-		dev_err(&pdev->dev, "unable to alloc memory for control phy\n");
+	if (!control_phy)
 		return -ENOMEM;
-	}
 
 	control_phy->dev = &pdev->dev;
 	control_phy->type = *(enum omap_control_phy_type *)of_id->data;
@@ -347,7 +345,6 @@ static struct platform_driver omap_control_phy_driver = {
 	.probe		= omap_control_phy_probe,
 	.driver		= {
 		.name	= "omap-control-phy",
-		.owner	= THIS_MODULE,
 		.of_match_table = of_match_ptr(omap_control_phy_id_table),
 	},
 };
diff --git a/drivers/phy/phy-omap-usb2.c b/drivers/phy/phy-omap-usb2.c
index 93d78359246c..8c842980834a 100644
--- a/drivers/phy/phy-omap-usb2.c
+++ b/drivers/phy/phy-omap-usb2.c
@@ -212,16 +212,12 @@ static int omap_usb2_probe(struct platform_device *pdev)
 	phy_data = (struct usb_phy_data *)of_id->data;
 
 	phy = devm_kzalloc(&pdev->dev, sizeof(*phy), GFP_KERNEL);
-	if (!phy) {
-		dev_err(&pdev->dev, "unable to allocate memory for USB2 PHY\n");
+	if (!phy)
 		return -ENOMEM;
-	}
 
 	otg = devm_kzalloc(&pdev->dev, sizeof(*otg), GFP_KERNEL);
-	if (!otg) {
-		dev_err(&pdev->dev, "unable to allocate memory for USB OTG\n");
+	if (!otg)
 		return -ENOMEM;
-	}
 
 	phy->dev		= &pdev->dev;
 
@@ -382,7 +378,6 @@ static struct platform_driver omap_usb2_driver = {
 	.remove		= omap_usb2_remove,
 	.driver		= {
 		.name	= "omap-usb2",
-		.owner	= THIS_MODULE,
 		.pm	= DEV_PM_OPS,
 		.of_match_table = of_match_ptr(omap_usb2_id_table),
 	},
diff --git a/drivers/phy/phy-qcom-apq8064-sata.c b/drivers/phy/phy-qcom-apq8064-sata.c
index b3ef7d805765..7b3ddfb65898 100644
--- a/drivers/phy/phy-qcom-apq8064-sata.c
+++ b/drivers/phy/phy-qcom-apq8064-sata.c
@@ -279,7 +279,6 @@ static struct platform_driver qcom_apq8064_sata_phy_driver = {
 	.remove	= qcom_apq8064_sata_phy_remove,
 	.driver = {
 		.name	= "qcom-apq8064-sata-phy",
-		.owner	= THIS_MODULE,
 		.of_match_table	= qcom_apq8064_sata_phy_of_match,
 	}
 };
diff --git a/drivers/phy/phy-qcom-ipq806x-sata.c b/drivers/phy/phy-qcom-ipq806x-sata.c
index 909b5a87fc6a..759b0bf5b6b3 100644
--- a/drivers/phy/phy-qcom-ipq806x-sata.c
+++ b/drivers/phy/phy-qcom-ipq806x-sata.c
@@ -201,7 +201,6 @@ static struct platform_driver qcom_ipq806x_sata_phy_driver = {
 	.remove	= qcom_ipq806x_sata_phy_remove,
 	.driver = {
 		.name	= "qcom-ipq806x-sata-phy",
-		.owner	= THIS_MODULE,
 		.of_match_table	= qcom_ipq806x_sata_phy_of_match,
 	}
 };
diff --git a/drivers/phy/phy-rcar-gen2.c b/drivers/phy/phy-rcar-gen2.c
new file mode 100644
index 000000000000..2793af17799f
--- /dev/null
+++ b/drivers/phy/phy-rcar-gen2.c
@@ -0,0 +1,341 @@
+/*
+ * Renesas R-Car Gen2 PHY driver
+ *
+ * Copyright (C) 2014 Renesas Solutions Corp.
+ * Copyright (C) 2014 Cogent Embedded, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/phy/phy.h>
+#include <linux/platform_device.h>
+#include <linux/spinlock.h>
+
+#include <asm/cmpxchg.h>
+
+#define USBHS_LPSTS			0x02
+#define USBHS_UGCTRL			0x80
+#define USBHS_UGCTRL2			0x84
+#define USBHS_UGSTS			0x88	/* The manuals have 0x90 */
+
+/* Low Power Status register (LPSTS) */
+#define USBHS_LPSTS_SUSPM		0x4000
+
+/* USB General control register (UGCTRL) */
+#define USBHS_UGCTRL_CONNECT		0x00000004
+#define USBHS_UGCTRL_PLLRESET		0x00000001
+
+/* USB General control register 2 (UGCTRL2) */
+#define USBHS_UGCTRL2_USB2SEL		0x80000000
+#define USBHS_UGCTRL2_USB2SEL_PCI	0x00000000
+#define USBHS_UGCTRL2_USB2SEL_USB30	0x80000000
+#define USBHS_UGCTRL2_USB0SEL		0x00000030
+#define USBHS_UGCTRL2_USB0SEL_PCI	0x00000010
+#define USBHS_UGCTRL2_USB0SEL_HS_USB	0x00000030
+
+/* USB General status register (UGSTS) */
+#define USBHS_UGSTS_LOCK		0x00000300 /* The manuals have 0x3 */
+
+#define PHYS_PER_CHANNEL	2
+
+struct rcar_gen2_phy {
+	struct phy *phy;
+	struct rcar_gen2_channel *channel;
+	int number;
+	u32 select_value;
+};
+
+struct rcar_gen2_channel {
+	struct device_node *of_node;
+	struct rcar_gen2_phy_driver *drv;
+	struct rcar_gen2_phy phys[PHYS_PER_CHANNEL];
+	int selected_phy;
+	u32 select_mask;
+};
+
+struct rcar_gen2_phy_driver {
+	void __iomem *base;
+	struct clk *clk;
+	spinlock_t lock;
+	int num_channels;
+	struct rcar_gen2_channel *channels;
+};
+
+static int rcar_gen2_phy_init(struct phy *p)
+{
+	struct rcar_gen2_phy *phy = phy_get_drvdata(p);
+	struct rcar_gen2_channel *channel = phy->channel;
+	struct rcar_gen2_phy_driver *drv = channel->drv;
+	unsigned long flags;
+	u32 ugctrl2;
+
+	/*
+	 * Try to acquire exclusive access to PHY.  The first driver calling
+	 * phy_init()  on a given channel wins, and all attempts  to use another
+	 * PHY on this channel will fail until phy_exit() is called by the first
+	 * driver.   Achieving this with cmpxcgh() should be SMP-safe.
+	 */
+	if (cmpxchg(&channel->selected_phy, -1, phy->number) != -1)
+		return -EBUSY;
+
+	clk_prepare_enable(drv->clk);
+
+	spin_lock_irqsave(&drv->lock, flags);
+	ugctrl2 = readl(drv->base + USBHS_UGCTRL2);
+	ugctrl2 &= ~channel->select_mask;
+	ugctrl2 |= phy->select_value;
+	writel(ugctrl2, drv->base + USBHS_UGCTRL2);
+	spin_unlock_irqrestore(&drv->lock, flags);
+	return 0;
+}
+
+static int rcar_gen2_phy_exit(struct phy *p)
+{
+	struct rcar_gen2_phy *phy = phy_get_drvdata(p);
+	struct rcar_gen2_channel *channel = phy->channel;
+
+	clk_disable_unprepare(channel->drv->clk);
+
+	channel->selected_phy = -1;
+
+	return 0;
+}
+
+static int rcar_gen2_phy_power_on(struct phy *p)
+{
+	struct rcar_gen2_phy *phy = phy_get_drvdata(p);
+	struct rcar_gen2_phy_driver *drv = phy->channel->drv;
+	void __iomem *base = drv->base;
+	unsigned long flags;
+	u32 value;
+	int err = 0, i;
+
+	/* Skip if it's not USBHS */
+	if (phy->select_value != USBHS_UGCTRL2_USB0SEL_HS_USB)
+		return 0;
+
+	spin_lock_irqsave(&drv->lock, flags);
+
+	/* Power on USBHS PHY */
+	value = readl(base + USBHS_UGCTRL);
+	value &= ~USBHS_UGCTRL_PLLRESET;
+	writel(value, base + USBHS_UGCTRL);
+
+	value = readw(base + USBHS_LPSTS);
+	value |= USBHS_LPSTS_SUSPM;
+	writew(value, base + USBHS_LPSTS);
+
+	for (i = 0; i < 20; i++) {
+		value = readl(base + USBHS_UGSTS);
+		if ((value & USBHS_UGSTS_LOCK) == USBHS_UGSTS_LOCK) {
+			value = readl(base + USBHS_UGCTRL);
+			value |= USBHS_UGCTRL_CONNECT;
+			writel(value, base + USBHS_UGCTRL);
+			goto out;
+		}
+		udelay(1);
+	}
+
+	/* Timed out waiting for the PLL lock */
+	err = -ETIMEDOUT;
+
+out:
+	spin_unlock_irqrestore(&drv->lock, flags);
+
+	return err;
+}
+
+static int rcar_gen2_phy_power_off(struct phy *p)
+{
+	struct rcar_gen2_phy *phy = phy_get_drvdata(p);
+	struct rcar_gen2_phy_driver *drv = phy->channel->drv;
+	void __iomem *base = drv->base;
+	unsigned long flags;
+	u32 value;
+
+	/* Skip if it's not USBHS */
+	if (phy->select_value != USBHS_UGCTRL2_USB0SEL_HS_USB)
+		return 0;
+
+	spin_lock_irqsave(&drv->lock, flags);
+
+	/* Power off USBHS PHY */
+	value = readl(base + USBHS_UGCTRL);
+	value &= ~USBHS_UGCTRL_CONNECT;
+	writel(value, base + USBHS_UGCTRL);
+
+	value = readw(base + USBHS_LPSTS);
+	value &= ~USBHS_LPSTS_SUSPM;
+	writew(value, base + USBHS_LPSTS);
+
+	value = readl(base + USBHS_UGCTRL);
+	value |= USBHS_UGCTRL_PLLRESET;
+	writel(value, base + USBHS_UGCTRL);
+
+	spin_unlock_irqrestore(&drv->lock, flags);
+
+	return 0;
+}
+
+static struct phy_ops rcar_gen2_phy_ops = {
+	.init		= rcar_gen2_phy_init,
+	.exit		= rcar_gen2_phy_exit,
+	.power_on	= rcar_gen2_phy_power_on,
+	.power_off	= rcar_gen2_phy_power_off,
+	.owner		= THIS_MODULE,
+};
+
+static const struct of_device_id rcar_gen2_phy_match_table[] = {
+	{ .compatible = "renesas,usb-phy-r8a7790" },
+	{ .compatible = "renesas,usb-phy-r8a7791" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, rcar_gen2_phy_match_table);
+
+static struct phy *rcar_gen2_phy_xlate(struct device *dev,
+				       struct of_phandle_args *args)
+{
+	struct rcar_gen2_phy_driver *drv;
+	struct device_node *np = args->np;
+	int i;
+
+	if (!of_device_is_available(np)) {
+		dev_warn(dev, "Requested PHY is disabled\n");
+		return ERR_PTR(-ENODEV);
+	}
+
+	drv = dev_get_drvdata(dev);
+	if (!drv)
+		return ERR_PTR(-EINVAL);
+
+	for (i = 0; i < drv->num_channels; i++) {
+		if (np == drv->channels[i].of_node)
+			break;
+	}
+
+	if (i >= drv->num_channels || args->args[0] >= 2)
+		return ERR_PTR(-ENODEV);
+
+	return drv->channels[i].phys[args->args[0]].phy;
+}
+
+static const u32 select_mask[] = {
+	[0]	= USBHS_UGCTRL2_USB0SEL,
+	[2]	= USBHS_UGCTRL2_USB2SEL,
+};
+
+static const u32 select_value[][PHYS_PER_CHANNEL] = {
+	[0]	= { USBHS_UGCTRL2_USB0SEL_PCI, USBHS_UGCTRL2_USB0SEL_HS_USB },
+	[2]	= { USBHS_UGCTRL2_USB2SEL_PCI, USBHS_UGCTRL2_USB2SEL_USB30 },
+};
+
+static int rcar_gen2_phy_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct rcar_gen2_phy_driver *drv;
+	struct phy_provider *provider;
+	struct device_node *np;
+	struct resource *res;
+	void __iomem *base;
+	struct clk *clk;
+	int i = 0;
+
+	if (!dev->of_node) {
+		dev_err(dev,
+			"This driver is required to be instantiated from device tree\n");
+		return -EINVAL;
+	}
+
+	clk = devm_clk_get(dev, "usbhs");
+	if (IS_ERR(clk)) {
+		dev_err(dev, "Can't get USBHS clock\n");
+		return PTR_ERR(clk);
+	}
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	base = devm_ioremap_resource(dev, res);
+	if (IS_ERR(base))
+		return PTR_ERR(base);
+
+	drv = devm_kzalloc(dev, sizeof(*drv), GFP_KERNEL);
+	if (!drv)
+		return -ENOMEM;
+
+	spin_lock_init(&drv->lock);
+
+	drv->clk = clk;
+	drv->base = base;
+
+	drv->num_channels = of_get_child_count(dev->of_node);
+	drv->channels = devm_kcalloc(dev, drv->num_channels,
+				     sizeof(struct rcar_gen2_channel),
+				     GFP_KERNEL);
+	if (!drv->channels)
+		return -ENOMEM;
+
+	for_each_child_of_node(dev->of_node, np) {
+		struct rcar_gen2_channel *channel = drv->channels + i;
+		u32 channel_num;
+		int error, n;
+
+		channel->of_node = np;
+		channel->drv = drv;
+		channel->selected_phy = -1;
+
+		error = of_property_read_u32(np, "reg", &channel_num);
+		if (error || channel_num > 2) {
+			dev_err(dev, "Invalid \"reg\" property\n");
+			return error;
+		}
+		channel->select_mask = select_mask[channel_num];
+
+		for (n = 0; n < PHYS_PER_CHANNEL; n++) {
+			struct rcar_gen2_phy *phy = &channel->phys[n];
+
+			phy->channel = channel;
+			phy->number = n;
+			phy->select_value = select_value[channel_num][n];
+
+			phy->phy = devm_phy_create(dev, NULL,
+						   &rcar_gen2_phy_ops, NULL);
+			if (IS_ERR(phy->phy)) {
+				dev_err(dev, "Failed to create PHY\n");
+				return PTR_ERR(phy->phy);
+			}
+			phy_set_drvdata(phy->phy, phy);
+		}
+
+		i++;
+	}
+
+	provider = devm_of_phy_provider_register(dev, rcar_gen2_phy_xlate);
+	if (IS_ERR(provider)) {
+		dev_err(dev, "Failed to register PHY provider\n");
+		return PTR_ERR(provider);
+	}
+
+	dev_set_drvdata(dev, drv);
+
+	return 0;
+}
+
+static struct platform_driver rcar_gen2_phy_driver = {
+	.driver = {
+		.name		= "phy_rcar_gen2",
+		.of_match_table	= rcar_gen2_phy_match_table,
+	},
+	.probe	= rcar_gen2_phy_probe,
+};
+
+module_platform_driver(rcar_gen2_phy_driver);
+
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("Renesas R-Car Gen2 PHY");
+MODULE_AUTHOR("Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>");
diff --git a/drivers/phy/phy-samsung-usb2.c b/drivers/phy/phy-samsung-usb2.c
index 3732ca25e09f..908949dfb4db 100644
--- a/drivers/phy/phy-samsung-usb2.c
+++ b/drivers/phy/phy-samsung-usb2.c
@@ -231,7 +231,6 @@ static struct platform_driver samsung_usb2_phy_driver = {
 	.driver = {
 		.of_match_table	= samsung_usb2_phy_of_match,
 		.name		= "samsung-usb2-phy",
-		.owner		= THIS_MODULE,
 	}
 };
 
diff --git a/drivers/phy/phy-spear1310-miphy.c b/drivers/phy/phy-spear1310-miphy.c
index 6dcbfcddb372..5f4c586ee951 100644
--- a/drivers/phy/phy-spear1310-miphy.c
+++ b/drivers/phy/phy-spear1310-miphy.c
@@ -212,10 +212,8 @@ static int spear1310_miphy_probe(struct platform_device *pdev)
 	struct phy_provider *phy_provider;
 
 	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
-	if (!priv) {
-		dev_err(dev, "can't alloc spear1310_miphy private date memory\n");
+	if (!priv)
 		return -ENOMEM;
-	}
 
 	priv->misc =
 		syscon_regmap_lookup_by_phandle(dev->of_node, "misc");
@@ -252,22 +250,11 @@ static struct platform_driver spear1310_miphy_driver = {
 	.probe		= spear1310_miphy_probe,
 	.driver = {
 		.name = "spear1310-miphy",
-		.owner = THIS_MODULE,
 		.of_match_table = of_match_ptr(spear1310_miphy_of_match),
 	},
 };
 
-static int __init spear1310_miphy_phy_init(void)
-{
-	return platform_driver_register(&spear1310_miphy_driver);
-}
-module_init(spear1310_miphy_phy_init);
-
-static void __exit spear1310_miphy_phy_exit(void)
-{
-	platform_driver_unregister(&spear1310_miphy_driver);
-}
-module_exit(spear1310_miphy_phy_exit);
+module_platform_driver(spear1310_miphy_driver);
 
 MODULE_DESCRIPTION("ST SPEAR1310-MIPHY driver");
 MODULE_AUTHOR("Pratyush Anand <pratyush.anand@st.com>");
diff --git a/drivers/phy/phy-spear1340-miphy.c b/drivers/phy/phy-spear1340-miphy.c
index 7135ba2603b6..1ecd0945bad3 100644
--- a/drivers/phy/phy-spear1340-miphy.c
+++ b/drivers/phy/phy-spear1340-miphy.c
@@ -249,10 +249,8 @@ static int spear1340_miphy_probe(struct platform_device *pdev)
 	struct phy_provider *phy_provider;
 
 	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
-	if (!priv) {
-		dev_err(dev, "can't alloc spear1340_miphy private date memory\n");
+	if (!priv)
 		return -ENOMEM;
-	}
 
 	priv->misc =
 		syscon_regmap_lookup_by_phandle(dev->of_node, "misc");
@@ -284,23 +282,12 @@ static struct platform_driver spear1340_miphy_driver = {
 	.probe		= spear1340_miphy_probe,
 	.driver = {
 		.name = "spear1340-miphy",
-		.owner = THIS_MODULE,
 		.pm = &spear1340_miphy_pm_ops,
 		.of_match_table = of_match_ptr(spear1340_miphy_of_match),
 	},
 };
 
-static int __init spear1340_miphy_phy_init(void)
-{
-	return platform_driver_register(&spear1340_miphy_driver);
-}
-module_init(spear1340_miphy_phy_init);
-
-static void __exit spear1340_miphy_phy_exit(void)
-{
-	platform_driver_unregister(&spear1340_miphy_driver);
-}
-module_exit(spear1340_miphy_phy_exit);
+module_platform_driver(spear1340_miphy_driver);
 
 MODULE_DESCRIPTION("ST SPEAR1340-MIPHY driver");
 MODULE_AUTHOR("Pratyush Anand <pratyush.anand@st.com>");
diff --git a/drivers/phy/phy-stih407-usb.c b/drivers/phy/phy-stih407-usb.c
new file mode 100644
index 000000000000..42428d4181ea
--- /dev/null
+++ b/drivers/phy/phy-stih407-usb.c
@@ -0,0 +1,177 @@
+/*
+ * Copyright (C) 2014 STMicroelectronics
+ *
+ * STMicroelectronics Generic PHY driver for STiH407 USB2.
+ *
+ * Author: Giuseppe Cavallaro <peppe.cavallaro@st.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2, as
+ * published by the Free Software Foundation.
+ *
+ */
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <linux/clk.h>
+#include <linux/regmap.h>
+#include <linux/reset.h>
+#include <linux/mfd/syscon.h>
+#include <linux/phy/phy.h>
+
+/* Default PHY_SEL and REFCLKSEL configuration */
+#define STIH407_USB_PICOPHY_CTRL_PORT_CONF	0x6
+#define STIH407_USB_PICOPHY_CTRL_PORT_MASK	0x1f
+
+/* ports parameters overriding */
+#define STIH407_USB_PICOPHY_PARAM_DEF		0x39a4dc
+#define STIH407_USB_PICOPHY_PARAM_MASK		0xffffffff
+
+struct stih407_usb2_picophy {
+	struct phy *phy;
+	struct regmap *regmap;
+	struct device *dev;
+	struct reset_control *rstc;
+	struct reset_control *rstport;
+	int ctrl;
+	int param;
+};
+
+static int stih407_usb2_pico_ctrl(struct stih407_usb2_picophy *phy_dev)
+{
+	reset_control_deassert(phy_dev->rstc);
+
+	return regmap_update_bits(phy_dev->regmap, phy_dev->ctrl,
+				  STIH407_USB_PICOPHY_CTRL_PORT_MASK,
+				  STIH407_USB_PICOPHY_CTRL_PORT_CONF);
+}
+
+static int stih407_usb2_init_port(struct phy *phy)
+{
+	int ret;
+	struct stih407_usb2_picophy *phy_dev = phy_get_drvdata(phy);
+
+	stih407_usb2_pico_ctrl(phy_dev);
+
+	ret = regmap_update_bits(phy_dev->regmap,
+				 phy_dev->param,
+				 STIH407_USB_PICOPHY_PARAM_MASK,
+				 STIH407_USB_PICOPHY_PARAM_DEF);
+	if (ret)
+		return ret;
+
+	return reset_control_deassert(phy_dev->rstport);
+}
+
+static int stih407_usb2_exit_port(struct phy *phy)
+{
+	struct stih407_usb2_picophy *phy_dev = phy_get_drvdata(phy);
+
+	/*
+	 * Only port reset is asserted, phy global reset is kept untouched
+	 * as other ports may still be active. When all ports are in reset
+	 * state, assumption is made that power will be cut off on the phy, in
+	 * case of suspend for instance. Theoretically, asserting individual
+	 * reset (like here) or global reset should be equivalent.
+	 */
+	return reset_control_assert(phy_dev->rstport);
+}
+
+static const struct phy_ops stih407_usb2_picophy_data = {
+	.init = stih407_usb2_init_port,
+	.exit = stih407_usb2_exit_port,
+	.owner = THIS_MODULE,
+};
+
+static int stih407_usb2_picophy_probe(struct platform_device *pdev)
+{
+	struct stih407_usb2_picophy *phy_dev;
+	struct device *dev = &pdev->dev;
+	struct device_node *np = dev->of_node;
+	struct phy_provider *phy_provider;
+	struct phy *phy;
+	struct resource *res;
+
+	phy_dev = devm_kzalloc(dev, sizeof(*phy_dev), GFP_KERNEL);
+	if (!phy_dev)
+		return -ENOMEM;
+
+	phy_dev->dev = dev;
+	dev_set_drvdata(dev, phy_dev);
+
+	phy_dev->rstc = devm_reset_control_get(dev, "global");
+	if (IS_ERR(phy_dev->rstc)) {
+		dev_err(dev, "failed to ctrl picoPHY reset\n");
+		return PTR_ERR(phy_dev->rstc);
+	}
+
+	phy_dev->rstport = devm_reset_control_get(dev, "port");
+	if (IS_ERR(phy_dev->rstport)) {
+		dev_err(dev, "failed to ctrl picoPHY reset\n");
+		return PTR_ERR(phy_dev->rstport);
+	}
+
+	/* Reset port by default: only deassert it in phy init */
+	reset_control_assert(phy_dev->rstport);
+
+	phy_dev->regmap = syscon_regmap_lookup_by_phandle(np, "st,syscfg");
+	if (IS_ERR(phy_dev->regmap)) {
+		dev_err(dev, "No syscfg phandle specified\n");
+		return PTR_ERR(phy_dev->regmap);
+	}
+
+	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "ctrl");
+	if (!res) {
+		dev_err(dev, "No ctrl reg found\n");
+		return -ENXIO;
+	}
+	phy_dev->ctrl = res->start;
+
+	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "param");
+	if (!res) {
+		dev_err(dev, "No param reg found\n");
+		return -ENXIO;
+	}
+	phy_dev->param = res->start;
+
+	phy = devm_phy_create(dev, NULL, &stih407_usb2_picophy_data, NULL);
+	if (IS_ERR(phy)) {
+		dev_err(dev, "failed to create Display Port PHY\n");
+		return PTR_ERR(phy);
+	}
+
+	phy_dev->phy = phy;
+	phy_set_drvdata(phy, phy_dev);
+
+	phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
+	if (IS_ERR(phy_provider))
+		return PTR_ERR(phy_provider);
+
+	dev_info(dev, "STiH407 USB Generic picoPHY driver probed!");
+
+	return 0;
+}
+
+static const struct of_device_id stih407_usb2_picophy_of_match[] = {
+	{ .compatible = "st,stih407-usb2-phy" },
+	{ /*sentinel */ },
+};
+
+MODULE_DEVICE_TABLE(of, stih407_usb2_picophy_of_match);
+
+static struct platform_driver stih407_usb2_picophy_driver = {
+	.probe = stih407_usb2_picophy_probe,
+	.driver = {
+		   .name = "stih407-usb-genphy",
+		   .of_match_table = stih407_usb2_picophy_of_match,
+		   }
+};
+
+module_platform_driver(stih407_usb2_picophy_driver);
+
+MODULE_AUTHOR("Giuseppe Cavallaro <peppe.cavallaro@st.com>");
+MODULE_DESCRIPTION("STMicroelectronics Generic picoPHY driver for STiH407");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/phy/phy-stih41x-usb.c b/drivers/phy/phy-stih41x-usb.c
new file mode 100644
index 000000000000..9f16cb8e01f4
--- /dev/null
+++ b/drivers/phy/phy-stih41x-usb.c
@@ -0,0 +1,187 @@
+/*
+ * Copyright (C) 2014 STMicroelectronics
+ *
+ * STMicroelectronics PHY driver for STiH41x USB.
+ *
+ * Author: Maxime Coquelin <maxime.coquelin@st.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2, as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <linux/clk.h>
+#include <linux/phy/phy.h>
+#include <linux/regmap.h>
+#include <linux/mfd/syscon.h>
+
+#define SYSCFG332  0x80
+#define SYSCFG2520 0x820
+
+/**
+ * struct stih41x_usb_cfg - SoC specific PHY register mapping
+ * @syscfg: Offset in syscfg registers bank
+ * @cfg_mask: Bits mask for PHY configuration
+ * @cfg: Static configuration value for PHY
+ * @oscok: Notify the PHY oscillator clock is ready
+ *	   Setting this bit enable the PHY
+ */
+struct stih41x_usb_cfg {
+	u32 syscfg;
+	u32 cfg_mask;
+	u32 cfg;
+	u32 oscok;
+};
+
+/**
+ * struct stih41x_usb_phy - Private data for the PHY
+ * @dev: device for this controller
+ * @regmap: Syscfg registers bank in which PHY is configured
+ * @cfg: SoC specific PHY register mapping
+ * @clk: Oscillator used by the PHY
+ */
+struct stih41x_usb_phy {
+	struct device *dev;
+	struct regmap *regmap;
+	const struct stih41x_usb_cfg *cfg;
+	struct clk *clk;
+};
+
+static struct stih41x_usb_cfg stih415_usb_phy_cfg = {
+	.syscfg = SYSCFG332,
+	.cfg_mask = 0x3f,
+	.cfg = 0x38,
+	.oscok = BIT(6),
+};
+
+static struct stih41x_usb_cfg stih416_usb_phy_cfg = {
+	.syscfg = SYSCFG2520,
+	.cfg_mask = 0x33f,
+	.cfg = 0x238,
+	.oscok = BIT(6),
+};
+
+static int stih41x_usb_phy_init(struct phy *phy)
+{
+	struct stih41x_usb_phy *phy_dev = phy_get_drvdata(phy);
+
+	return regmap_update_bits(phy_dev->regmap, phy_dev->cfg->syscfg,
+			   phy_dev->cfg->cfg_mask, phy_dev->cfg->cfg);
+}
+
+static int stih41x_usb_phy_power_on(struct phy *phy)
+{
+	struct stih41x_usb_phy *phy_dev = phy_get_drvdata(phy);
+	int ret;
+
+	ret = clk_prepare_enable(phy_dev->clk);
+	if (ret) {
+		dev_err(phy_dev->dev, "Failed to enable osc_phy clock\n");
+		return ret;
+	}
+
+	return regmap_update_bits(phy_dev->regmap, phy_dev->cfg->syscfg,
+			phy_dev->cfg->oscok, phy_dev->cfg->oscok);
+}
+
+static int stih41x_usb_phy_power_off(struct phy *phy)
+{
+	struct stih41x_usb_phy *phy_dev = phy_get_drvdata(phy);
+	int ret;
+
+	ret = regmap_update_bits(phy_dev->regmap, phy_dev->cfg->syscfg,
+			phy_dev->cfg->oscok, 0);
+	if (ret) {
+		dev_err(phy_dev->dev, "Failed to clear oscok bit\n");
+		return ret;
+	}
+
+	clk_disable_unprepare(phy_dev->clk);
+
+	return 0;
+}
+
+static struct phy_ops stih41x_usb_phy_ops = {
+	.init		= stih41x_usb_phy_init,
+	.power_on	= stih41x_usb_phy_power_on,
+	.power_off	= stih41x_usb_phy_power_off,
+	.owner		= THIS_MODULE,
+};
+
+static const struct of_device_id stih41x_usb_phy_of_match[];
+
+static int stih41x_usb_phy_probe(struct platform_device *pdev)
+{
+	struct device_node *np = pdev->dev.of_node;
+	const struct of_device_id *match;
+	struct stih41x_usb_phy *phy_dev;
+	struct device *dev = &pdev->dev;
+	struct phy_provider *phy_provider;
+	struct phy *phy;
+
+	phy_dev = devm_kzalloc(dev, sizeof(*phy_dev), GFP_KERNEL);
+	if (!phy_dev)
+		return -ENOMEM;
+
+	match = of_match_device(stih41x_usb_phy_of_match, &pdev->dev);
+	if (!match)
+		return -ENODEV;
+
+	phy_dev->cfg = match->data;
+
+	phy_dev->regmap = syscon_regmap_lookup_by_phandle(np, "st,syscfg");
+	if (IS_ERR(phy_dev->regmap)) {
+		dev_err(dev, "No syscfg phandle specified\n");
+		return PTR_ERR(phy_dev->regmap);
+	}
+
+	phy_dev->clk = devm_clk_get(dev, "osc_phy");
+	if (IS_ERR(phy_dev->clk)) {
+		dev_err(dev, "osc_phy clk not found\n");
+		return PTR_ERR(phy_dev->clk);
+	}
+
+	phy = devm_phy_create(dev, NULL, &stih41x_usb_phy_ops, NULL);
+
+	if (IS_ERR(phy)) {
+		dev_err(dev, "failed to create phy\n");
+		return PTR_ERR(phy);
+	}
+
+	phy_dev->dev = dev;
+
+	phy_set_drvdata(phy, phy_dev);
+
+	phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
+	if (IS_ERR(phy_provider))
+		return PTR_ERR(phy_provider);
+
+	return 0;
+}
+
+static const struct of_device_id stih41x_usb_phy_of_match[] = {
+	{ .compatible = "st,stih415-usb-phy", .data = &stih415_usb_phy_cfg },
+	{ .compatible = "st,stih416-usb-phy", .data = &stih416_usb_phy_cfg },
+	{ /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(of, stih41x_usb_phy_of_match);
+
+static struct platform_driver stih41x_usb_phy_driver = {
+	.probe	= stih41x_usb_phy_probe,
+	.driver = {
+		.name	= "stih41x-usb-phy",
+		.of_match_table	= stih41x_usb_phy_of_match,
+	}
+};
+module_platform_driver(stih41x_usb_phy_driver);
+
+MODULE_AUTHOR("Maxime Coquelin <maxime.coquelin@st.com>");
+MODULE_DESCRIPTION("STMicroelectronics USB PHY driver for STiH41x series");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/phy/phy-sun4i-usb.c b/drivers/phy/phy-sun4i-usb.c
index 61ebea49709b..0baf5efc8a40 100644
--- a/drivers/phy/phy-sun4i-usb.c
+++ b/drivers/phy/phy-sun4i-usb.c
@@ -325,7 +325,6 @@ static struct platform_driver sun4i_usb_phy_driver = {
 	.driver = {
 		.of_match_table	= sun4i_usb_phy_of_match,
 		.name  = "sun4i-usb-phy",
-		.owner = THIS_MODULE,
 	}
 };
 module_platform_driver(sun4i_usb_phy_driver);
diff --git a/drivers/phy/phy-ti-pipe3.c b/drivers/phy/phy-ti-pipe3.c
index b964aa967b46..ab1e22d9a1e8 100644
--- a/drivers/phy/phy-ti-pipe3.c
+++ b/drivers/phy/phy-ti-pipe3.c
@@ -299,10 +299,9 @@ static int ti_pipe3_probe(struct platform_device *pdev)
 	struct clk *clk;
 
 	phy = devm_kzalloc(&pdev->dev, sizeof(*phy), GFP_KERNEL);
-	if (!phy) {
-		dev_err(&pdev->dev, "unable to alloc mem for TI PIPE3 PHY\n");
+	if (!phy)
 		return -ENOMEM;
-	}
+
 	phy->dev		= &pdev->dev;
 
 	if (!of_device_is_compatible(node, "ti,phy-pipe3-pcie")) {
@@ -519,7 +518,6 @@ static struct platform_driver ti_pipe3_driver = {
 	.remove		= ti_pipe3_remove,
 	.driver		= {
 		.name	= "ti-pipe3",
-		.owner	= THIS_MODULE,
 		.pm	= DEV_PM_OPS,
 		.of_match_table = of_match_ptr(ti_pipe3_id_table),
 	},
diff --git a/drivers/phy/phy-twl4030-usb.c b/drivers/phy/phy-twl4030-usb.c
index 9cd33a4bcfb1..7b04befd5271 100644
--- a/drivers/phy/phy-twl4030-usb.c
+++ b/drivers/phy/phy-twl4030-usb.c
@@ -28,7 +28,6 @@
 #include <linux/init.h>
 #include <linux/interrupt.h>
 #include <linux/platform_device.h>
-#include <linux/spinlock.h>
 #include <linux/workqueue.h>
 #include <linux/io.h>
 #include <linux/delay.h>
@@ -155,7 +154,7 @@ struct twl4030_usb {
 	struct regulator	*usb3v1;
 
 	/* for vbus reporting with irqs disabled */
-	spinlock_t		lock;
+	struct mutex		lock;
 
 	/* pin configuration */
 	enum twl4030_usb_mode	usb_mode;
@@ -163,8 +162,6 @@ struct twl4030_usb {
 	int			irq;
 	enum omap_musb_vbus_id_status linkstat;
 	bool			vbus_supplied;
-	u8			asleep;
-	bool			irq_enabled;
 
 	struct delayed_work	id_workaround_work;
 };
@@ -384,55 +381,18 @@ static void __twl4030_phy_power(struct twl4030_usb *twl, int on)
 	WARN_ON(twl4030_usb_write_verify(twl, PHY_PWR_CTRL, pwr) < 0);
 }
 
-static void twl4030_phy_power(struct twl4030_usb *twl, int on)
-{
-	int ret;
-
-	if (on) {
-		ret = regulator_enable(twl->usb3v1);
-		if (ret)
-			dev_err(twl->dev, "Failed to enable usb3v1\n");
-
-		ret = regulator_enable(twl->usb1v8);
-		if (ret)
-			dev_err(twl->dev, "Failed to enable usb1v8\n");
-
-		/*
-		 * Disabling usb3v1 regulator (= writing 0 to VUSB3V1_DEV_GRP
-		 * in twl4030) resets the VUSB_DEDICATED2 register. This reset
-		 * enables VUSB3V1_SLEEP bit that remaps usb3v1 ACTIVE state to
-		 * SLEEP. We work around this by clearing the bit after usv3v1
-		 * is re-activated. This ensures that VUSB3V1 is really active.
-		 */
-		twl_i2c_write_u8(TWL_MODULE_PM_RECEIVER, 0, VUSB_DEDICATED2);
-
-		ret = regulator_enable(twl->usb1v5);
-		if (ret)
-			dev_err(twl->dev, "Failed to enable usb1v5\n");
-
-		__twl4030_phy_power(twl, 1);
-		twl4030_usb_write(twl, PHY_CLK_CTRL,
-				  twl4030_usb_read(twl, PHY_CLK_CTRL) |
-					(PHY_CLK_CTRL_CLOCKGATING_EN |
-						PHY_CLK_CTRL_CLK32K_EN));
-	} else {
-		__twl4030_phy_power(twl, 0);
-		regulator_disable(twl->usb1v5);
-		regulator_disable(twl->usb1v8);
-		regulator_disable(twl->usb3v1);
-	}
-}
-
 static int twl4030_usb_runtime_suspend(struct device *dev)
 {
 	struct twl4030_usb *twl = dev_get_drvdata(dev);
 
 	dev_dbg(twl->dev, "%s\n", __func__);
-	if (twl->asleep)
+	if (pm_runtime_suspended(dev))
 		return 0;
 
-	twl4030_phy_power(twl, 0);
-	twl->asleep = 1;
+	__twl4030_phy_power(twl, 0);
+	regulator_disable(twl->usb1v5);
+	regulator_disable(twl->usb1v8);
+	regulator_disable(twl->usb3v1);
 
 	return 0;
 }
@@ -440,13 +400,38 @@ static int twl4030_usb_runtime_suspend(struct device *dev)
 static int twl4030_usb_runtime_resume(struct device *dev)
 {
 	struct twl4030_usb *twl = dev_get_drvdata(dev);
+	int res;
 
 	dev_dbg(twl->dev, "%s\n", __func__);
-	if (!twl->asleep)
+	if (pm_runtime_active(dev))
 		return 0;
 
-	twl4030_phy_power(twl, 1);
-	twl->asleep = 0;
+	res = regulator_enable(twl->usb3v1);
+	if (res)
+		dev_err(twl->dev, "Failed to enable usb3v1\n");
+
+	res = regulator_enable(twl->usb1v8);
+	if (res)
+		dev_err(twl->dev, "Failed to enable usb1v8\n");
+
+	/*
+	 * Disabling usb3v1 regulator (= writing 0 to VUSB3V1_DEV_GRP
+	 * in twl4030) resets the VUSB_DEDICATED2 register. This reset
+	 * enables VUSB3V1_SLEEP bit that remaps usb3v1 ACTIVE state to
+	 * SLEEP. We work around this by clearing the bit after usv3v1
+	 * is re-activated. This ensures that VUSB3V1 is really active.
+	 */
+	twl_i2c_write_u8(TWL_MODULE_PM_RECEIVER, 0, VUSB_DEDICATED2);
+
+	res = regulator_enable(twl->usb1v5);
+	if (res)
+		dev_err(twl->dev, "Failed to enable usb1v5\n");
+
+	__twl4030_phy_power(twl, 1);
+	twl4030_usb_write(twl, PHY_CLK_CTRL,
+			  twl4030_usb_read(twl, PHY_CLK_CTRL) |
+			  (PHY_CLK_CTRL_CLOCKGATING_EN |
+			   PHY_CLK_CTRL_CLK32K_EN));
 
 	return 0;
 }
@@ -472,16 +457,8 @@ static int twl4030_phy_power_on(struct phy *phy)
 	twl4030_usb_set_mode(twl, twl->usb_mode);
 	if (twl->usb_mode == T2_USB_MODE_ULPI)
 		twl4030_i2c_access(twl, 0);
+	schedule_delayed_work(&twl->id_workaround_work, 0);
 
-	/*
-	 * XXX When VBUS gets driven after musb goes to A mode,
-	 * ID_PRES related interrupts no longer arrive, why?
-	 * Register itself is updated fine though, so we must poll.
-	 */
-	if (twl->linkstat == OMAP_MUSB_ID_GROUND) {
-		cancel_delayed_work(&twl->id_workaround_work);
-		schedule_delayed_work(&twl->id_workaround_work, HZ);
-	}
 	return 0;
 }
 
@@ -538,13 +515,12 @@ static ssize_t twl4030_usb_vbus_show(struct device *dev,
 		struct device_attribute *attr, char *buf)
 {
 	struct twl4030_usb *twl = dev_get_drvdata(dev);
-	unsigned long flags;
 	int ret = -EINVAL;
 
-	spin_lock_irqsave(&twl->lock, flags);
+	mutex_lock(&twl->lock);
 	ret = sprintf(buf, "%s\n",
 			twl->vbus_supplied ? "on" : "off");
-	spin_unlock_irqrestore(&twl->lock, flags);
+	mutex_unlock(&twl->lock);
 
 	return ret;
 }
@@ -558,12 +534,12 @@ static irqreturn_t twl4030_usb_irq(int irq, void *_twl)
 
 	status = twl4030_usb_linkstat(twl);
 
-	spin_lock_irq(&twl->lock);
+	mutex_lock(&twl->lock);
 	if (status >= 0 && status != twl->linkstat) {
 		twl->linkstat = status;
 		status_changed = true;
 	}
-	spin_unlock_irq(&twl->lock);
+	mutex_unlock(&twl->lock);
 
 	if (status_changed) {
 		/* FIXME add a set_power() method so that B-devices can
@@ -579,10 +555,10 @@ static irqreturn_t twl4030_usb_irq(int irq, void *_twl)
 		 */
 		if ((status == OMAP_MUSB_VBUS_VALID) ||
 		    (status == OMAP_MUSB_ID_GROUND)) {
-			if (twl->asleep)
+			if (pm_runtime_suspended(twl->dev))
 				pm_runtime_get_sync(twl->dev);
 		} else {
-			if (!twl->asleep) {
+			if (pm_runtime_active(twl->dev)) {
 				pm_runtime_mark_last_busy(twl->dev);
 				pm_runtime_put_autosuspend(twl->dev);
 			}
@@ -591,7 +567,7 @@ static irqreturn_t twl4030_usb_irq(int irq, void *_twl)
 	}
 
 	/* don't schedule during sleep - irq works right then */
-	if (status == OMAP_MUSB_ID_GROUND && !twl->asleep) {
+	if (status == OMAP_MUSB_ID_GROUND && pm_runtime_active(twl->dev)) {
 		cancel_delayed_work(&twl->id_workaround_work);
 		schedule_delayed_work(&twl->id_workaround_work, HZ);
 	}
@@ -613,16 +589,9 @@ static void twl4030_id_workaround_work(struct work_struct *work)
 static int twl4030_phy_init(struct phy *phy)
 {
 	struct twl4030_usb *twl = phy_get_drvdata(phy);
-	enum omap_musb_vbus_id_status status;
 
 	pm_runtime_get_sync(twl->dev);
-	status = twl4030_usb_linkstat(twl);
-	twl->linkstat = status;
-
-	if (status == OMAP_MUSB_ID_GROUND || status == OMAP_MUSB_VBUS_VALID)
-		omap_musb_mailbox(twl->linkstat);
-
-	sysfs_notify(&twl->dev->kobj, NULL, "vbus");
+	schedule_delayed_work(&twl->id_workaround_work, 0);
 	pm_runtime_mark_last_busy(twl->dev);
 	pm_runtime_put_autosuspend(twl->dev);
 
@@ -699,7 +668,7 @@ static int twl4030_usb_probe(struct platform_device *pdev)
 	twl->dev		= &pdev->dev;
 	twl->irq		= platform_get_irq(pdev, 0);
 	twl->vbus_supplied	= false;
-	twl->asleep		= 1;
+	twl->linkstat		= -EINVAL;
 	twl->linkstat		= OMAP_MUSB_UNKNOWN;
 
 	twl->phy.dev		= twl->dev;
@@ -724,8 +693,8 @@ static int twl4030_usb_probe(struct platform_device *pdev)
 	if (IS_ERR(phy_provider))
 		return PTR_ERR(phy_provider);
 
-	/* init spinlock for workqueue */
-	spin_lock_init(&twl->lock);
+	/* init mutex for workqueue */
+	mutex_init(&twl->lock);
 
 	INIT_DELAYED_WORK(&twl->id_workaround_work, twl4030_id_workaround_work);
 
@@ -755,7 +724,6 @@ static int twl4030_usb_probe(struct platform_device *pdev)
 	 * set_host() and/or set_peripheral() ... OTG_capable boards
 	 * need both handles, otherwise just one suffices.
 	 */
-	twl->irq_enabled = true;
 	status = devm_request_threaded_irq(twl->dev, twl->irq, NULL,
 			twl4030_usb_irq, IRQF_TRIGGER_FALLING |
 			IRQF_TRIGGER_RISING | IRQF_ONESHOT, "twl4030_usb", twl);
@@ -817,7 +785,6 @@ static struct platform_driver twl4030_usb_driver = {
 	.driver		= {
 		.name	= "twl4030_usb",
 		.pm	= &twl4030_usb_pm_ops,
-		.owner	= THIS_MODULE,
 		.of_match_table = of_match_ptr(twl4030_usb_id_table),
 	},
 };
diff --git a/drivers/phy/phy-xgene.c b/drivers/phy/phy-xgene.c
index db809b97219e..f8a51b16ade8 100644
--- a/drivers/phy/phy-xgene.c
+++ b/drivers/phy/phy-xgene.c
@@ -1738,7 +1738,6 @@ static struct platform_driver xgene_phy_driver = {
 	.probe = xgene_phy_probe,
 	.driver = {
 		   .name = "xgene-phy",
-		   .owner = THIS_MODULE,
 		   .of_match_table = xgene_phy_of_match,
 	},
 };
diff --git a/drivers/usb/Kconfig b/drivers/usb/Kconfig
index cf1b19bca306..ae481c37a208 100644
--- a/drivers/usb/Kconfig
+++ b/drivers/usb/Kconfig
@@ -149,4 +149,14 @@ source "drivers/usb/phy/Kconfig"
 
 source "drivers/usb/gadget/Kconfig"
 
+config USB_LED_TRIG
+	bool "USB LED Triggers"
+	depends on LEDS_CLASS && USB_COMMON && LEDS_TRIGGERS
+	help
+	  This option adds LED triggers for USB host and/or gadget activity.
+
+	  Say Y here if you are working on a system with led-class supported
+	  LEDs and you want to use them as activity indicators for USB host or
+	  gadget.
+
 endif # USB_SUPPORT
diff --git a/drivers/usb/README b/drivers/usb/README
index 284f46b3e1cc..2144e7dbfa41 100644
--- a/drivers/usb/README
+++ b/drivers/usb/README
@@ -24,7 +24,7 @@ Here is a list of what each subdirectory here is, and what is contained in
 them.
 
 core/		- This is for the core USB host code, including the
-		  usbfs files and the hub class driver ("khubd").
+		  usbfs files and the hub class driver ("hub_wq").
 
 host/		- This is for USB host controller drivers.  This
 		  includes UHCI, OHCI, EHCI, and others that might
diff --git a/drivers/usb/chipidea/ci.h b/drivers/usb/chipidea/ci.h
index 9563cb56d564..ea40626e0246 100644
--- a/drivers/usb/chipidea/ci.h
+++ b/drivers/usb/chipidea/ci.h
@@ -99,10 +99,10 @@ enum ci_role {
 
 /**
  * struct ci_role_driver - host/gadget role driver
- * start: start this role
- * stop: stop this role
- * irq: irq handler for this role
- * name: role name string (host/gadget)
+ * @start: start this role
+ * @stop: stop this role
+ * @irq: irq handler for this role
+ * @name: role name string (host/gadget)
  */
 struct ci_role_driver {
 	int		(*start)(struct ci_hdrc *);
@@ -245,6 +245,7 @@ static inline void ci_role_stop(struct ci_hdrc *ci)
 
 /**
  * hw_read: reads from a hw register
+ * @ci: the controller
  * @reg:  register index
  * @mask: bitfield mask
  *
@@ -277,6 +278,7 @@ static inline void __hw_write(struct ci_hdrc *ci, u32 val,
 
 /**
  * hw_write: writes to a hw register
+ * @ci: the controller
  * @reg:  register index
  * @mask: bitfield mask
  * @data: new value
@@ -293,6 +295,7 @@ static inline void hw_write(struct ci_hdrc *ci, enum ci_hw_regs reg,
 
 /**
  * hw_test_and_clear: tests & clears a hw register
+ * @ci: the controller
  * @reg:  register index
  * @mask: bitfield mask
  *
@@ -309,6 +312,7 @@ static inline u32 hw_test_and_clear(struct ci_hdrc *ci, enum ci_hw_regs reg,
 
 /**
  * hw_test_and_write: tests & writes a hw register
+ * @ci: the controller
  * @reg:  register index
  * @mask: bitfield mask
  * @data: new value
@@ -327,6 +331,8 @@ static inline u32 hw_test_and_write(struct ci_hdrc *ci, enum ci_hw_regs reg,
 /**
  * ci_otg_is_fsm_mode: runtime check if otg controller
  * is in otg fsm mode.
+ *
+ * @ci: chipidea device
  */
 static inline bool ci_otg_is_fsm_mode(struct ci_hdrc *ci)
 {
diff --git a/drivers/usb/chipidea/ci_hdrc_imx.c b/drivers/usb/chipidea/ci_hdrc_imx.c
index 65444b02bd68..a7ab0f15926e 100644
--- a/drivers/usb/chipidea/ci_hdrc_imx.c
+++ b/drivers/usb/chipidea/ci_hdrc_imx.c
@@ -54,6 +54,7 @@ struct ci_hdrc_imx_data {
 
 static struct imx_usbmisc_data *usbmisc_get_init_data(struct device *dev)
 {
+	struct platform_device *misc_pdev;
 	struct device_node *np = dev->of_node;
 	struct of_phandle_args args;
 	struct imx_usbmisc_data *data;
@@ -79,8 +80,15 @@ static struct imx_usbmisc_data *usbmisc_get_init_data(struct device *dev)
 	}
 
 	data->index = args.args[0];
+
+	misc_pdev = of_find_device_by_node(args.np);
 	of_node_put(args.np);
 
+	if (!misc_pdev)
+		return ERR_PTR(-EPROBE_DEFER);
+
+	data->dev = &misc_pdev->dev;
+
 	if (of_find_property(np, "disable-over-current", NULL))
 		data->disable_oc = 1;
 
diff --git a/drivers/usb/chipidea/ci_hdrc_imx.h b/drivers/usb/chipidea/ci_hdrc_imx.h
index 996ec93467b2..4ed828f75a1e 100644
--- a/drivers/usb/chipidea/ci_hdrc_imx.h
+++ b/drivers/usb/chipidea/ci_hdrc_imx.h
@@ -13,6 +13,7 @@
 #define __DRIVER_USB_CHIPIDEA_CI_HDRC_IMX_H
 
 struct imx_usbmisc_data {
+	struct device *dev;
 	int index;
 
 	unsigned int disable_oc:1; /* over current detect disabled */
diff --git a/drivers/usb/chipidea/core.c b/drivers/usb/chipidea/core.c
index 619d13e29995..3df5005c554d 100644
--- a/drivers/usb/chipidea/core.c
+++ b/drivers/usb/chipidea/core.c
@@ -139,6 +139,8 @@ static int hw_alloc_regmap(struct ci_hdrc *ci, bool is_lpm)
 /**
  * hw_read_intr_enable: returns interrupt enable register
  *
+ * @ci: the controller
+ *
  * This function returns register data
  */
 u32 hw_read_intr_enable(struct ci_hdrc *ci)
@@ -149,6 +151,8 @@ u32 hw_read_intr_enable(struct ci_hdrc *ci)
 /**
  * hw_read_intr_status: returns interrupt status register
  *
+ * @ci: the controller
+ *
  * This function returns register data
  */
 u32 hw_read_intr_status(struct ci_hdrc *ci)
@@ -176,6 +180,8 @@ int hw_port_test_set(struct ci_hdrc *ci, u8 mode)
 /**
  * hw_port_test_get: reads port test mode value
  *
+ * @ci: the controller
+ *
  * This function returns port test mode value
  */
 u8 hw_port_test_get(struct ci_hdrc *ci)
@@ -295,7 +301,7 @@ static void hw_phymode_configure(struct ci_hdrc *ci)
 /**
  * ci_usb_phy_init: initialize phy according to different phy type
  * @ci: the controller
-  *
+ *
  * This function returns an error code if usb_phy_init has failed
  */
 static int ci_usb_phy_init(struct ci_hdrc *ci)
@@ -473,6 +479,10 @@ static int ci_get_platdata(struct device *dev,
 				PTR_ERR(platdata->reg_vbus));
 			return PTR_ERR(platdata->reg_vbus);
 		}
+		/* Get TPL support */
+		if (!platdata->tpl_support)
+			platdata->tpl_support =
+				of_usb_host_tpl_support(dev->of_node);
 	}
 
 	if (of_usb_get_maximum_speed(dev->of_node) == USB_SPEED_FULL)
@@ -658,7 +668,7 @@ static int ci_hdrc_probe(struct platform_device *pdev)
 		goto deinit_phy;
 	}
 
-	if (ci->is_otg) {
+	if (ci->is_otg && ci->roles[CI_ROLE_GADGET]) {
 		/* Disable and clear all OTG irq */
 		hw_write_otgsc(ci, OTGSC_INT_EN_BITS | OTGSC_INT_STATUS_BITS,
 							OTGSC_INT_STATUS_BITS);
diff --git a/drivers/usb/chipidea/host.c b/drivers/usb/chipidea/host.c
index a93d950e9468..ebde7b6ce687 100644
--- a/drivers/usb/chipidea/host.c
+++ b/drivers/usb/chipidea/host.c
@@ -59,7 +59,8 @@ static int host_start(struct ci_hdrc *ci)
 	hcd->has_tt = 1;
 
 	hcd->power_budget = ci->platdata->power_budget;
-	hcd->phy = ci->transceiver;
+	hcd->usb_phy = ci->transceiver;
+	hcd->tpl_support = ci->platdata->tpl_support;
 
 	ehci = hcd_to_ehci(hcd);
 	ehci->caps = ci->hw_bank.cap;
diff --git a/drivers/usb/chipidea/udc.c b/drivers/usb/chipidea/udc.c
index b8125aa64ad8..0444d3f8971a 100644
--- a/drivers/usb/chipidea/udc.c
+++ b/drivers/usb/chipidea/udc.c
@@ -627,7 +627,7 @@ __acquires(hwep->lock)
 
 		if (hwreq->req.complete != NULL) {
 			spin_unlock(hwep->lock);
-			hwreq->req.complete(&hwep->ep, &hwreq->req);
+			usb_gadget_giveback_request(&hwep->ep, &hwreq->req);
 			spin_lock(hwep->lock);
 		}
 	}
@@ -922,7 +922,7 @@ __acquires(hwep->lock)
 			if ((hwep->type == USB_ENDPOINT_XFER_CONTROL) &&
 					hwreq->req.length)
 				hweptemp = hwep->ci->ep0in;
-			hwreq->req.complete(&hweptemp->ep, &hwreq->req);
+			usb_gadget_giveback_request(&hweptemp->ep, &hwreq->req);
 			spin_lock(hwep->lock);
 		}
 	}
@@ -1347,7 +1347,7 @@ static int ep_dequeue(struct usb_ep *ep, struct usb_request *req)
 
 	if (hwreq->req.complete != NULL) {
 		spin_unlock(hwep->lock);
-		hwreq->req.complete(&hwep->ep, &hwreq->req);
+		usb_gadget_giveback_request(&hwep->ep, &hwreq->req);
 		spin_lock(hwep->lock);
 	}
 
diff --git a/drivers/usb/chipidea/usbmisc_imx.c b/drivers/usb/chipidea/usbmisc_imx.c
index 85293b8b1df9..926c997ef310 100644
--- a/drivers/usb/chipidea/usbmisc_imx.c
+++ b/drivers/usb/chipidea/usbmisc_imx.c
@@ -57,6 +57,8 @@
 
 #define MX6_BM_OVER_CUR_DIS		BIT(7)
 
+#define VF610_OVER_CUR_DIS		BIT(7)
+
 struct usbmisc_ops {
 	/* It's called once when probe a usb device */
 	int (*init)(struct imx_usbmisc_data *data);
@@ -71,10 +73,9 @@ struct imx_usbmisc {
 	const struct usbmisc_ops *ops;
 };
 
-static struct imx_usbmisc *usbmisc;
-
 static int usbmisc_imx25_init(struct imx_usbmisc_data *data)
 {
+	struct imx_usbmisc *usbmisc = dev_get_drvdata(data->dev);
 	unsigned long flags;
 	u32 val = 0;
 
@@ -108,6 +109,7 @@ static int usbmisc_imx25_init(struct imx_usbmisc_data *data)
 
 static int usbmisc_imx25_post(struct imx_usbmisc_data *data)
 {
+	struct imx_usbmisc *usbmisc = dev_get_drvdata(data->dev);
 	void __iomem *reg;
 	unsigned long flags;
 	u32 val;
@@ -130,6 +132,7 @@ static int usbmisc_imx25_post(struct imx_usbmisc_data *data)
 
 static int usbmisc_imx27_init(struct imx_usbmisc_data *data)
 {
+	struct imx_usbmisc *usbmisc = dev_get_drvdata(data->dev);
 	unsigned long flags;
 	u32 val;
 
@@ -160,6 +163,7 @@ static int usbmisc_imx27_init(struct imx_usbmisc_data *data)
 
 static int usbmisc_imx53_init(struct imx_usbmisc_data *data)
 {
+	struct imx_usbmisc *usbmisc = dev_get_drvdata(data->dev);
 	void __iomem *reg = NULL;
 	unsigned long flags;
 	u32 val = 0;
@@ -204,6 +208,7 @@ static int usbmisc_imx53_init(struct imx_usbmisc_data *data)
 
 static int usbmisc_imx6q_init(struct imx_usbmisc_data *data)
 {
+	struct imx_usbmisc *usbmisc = dev_get_drvdata(data->dev);
 	unsigned long flags;
 	u32 reg;
 
@@ -221,6 +226,26 @@ static int usbmisc_imx6q_init(struct imx_usbmisc_data *data)
 	return 0;
 }
 
+static int usbmisc_vf610_init(struct imx_usbmisc_data *data)
+{
+	struct imx_usbmisc *usbmisc = dev_get_drvdata(data->dev);
+	u32 reg;
+
+	/*
+	 * Vybrid only has one misc register set, but in two different
+	 * areas. These is reflected in two instances of this driver.
+	 */
+	if (data->index >= 1)
+		return -EINVAL;
+
+	if (data->disable_oc) {
+		reg = readl(usbmisc->base);
+		writel(reg | VF610_OVER_CUR_DIS, usbmisc->base);
+	}
+
+	return 0;
+}
+
 static const struct usbmisc_ops imx25_usbmisc_ops = {
 	.init = usbmisc_imx25_init,
 	.post = usbmisc_imx25_post,
@@ -238,10 +263,14 @@ static const struct usbmisc_ops imx6q_usbmisc_ops = {
 	.init = usbmisc_imx6q_init,
 };
 
+static const struct usbmisc_ops vf610_usbmisc_ops = {
+	.init = usbmisc_vf610_init,
+};
+
 int imx_usbmisc_init(struct imx_usbmisc_data *data)
 {
-	if (!usbmisc)
-		return -EPROBE_DEFER;
+	struct imx_usbmisc *usbmisc = dev_get_drvdata(data->dev);
+
 	if (!usbmisc->ops->init)
 		return 0;
 	return usbmisc->ops->init(data);
@@ -250,8 +279,8 @@ EXPORT_SYMBOL_GPL(imx_usbmisc_init);
 
 int imx_usbmisc_init_post(struct imx_usbmisc_data *data)
 {
-	if (!usbmisc)
-		return -EPROBE_DEFER;
+	struct imx_usbmisc *usbmisc = dev_get_drvdata(data->dev);
+
 	if (!usbmisc->ops->post)
 		return 0;
 	return usbmisc->ops->post(data);
@@ -283,6 +312,10 @@ static const struct of_device_id usbmisc_imx_dt_ids[] = {
 		.compatible = "fsl,imx6q-usbmisc",
 		.data = &imx6q_usbmisc_ops,
 	},
+	{
+		.compatible = "fsl,vf610-usbmisc",
+		.data = &vf610_usbmisc_ops,
+	},
 	{ /* sentinel */ }
 };
 MODULE_DEVICE_TABLE(of, usbmisc_imx_dt_ids);
@@ -294,9 +327,6 @@ static int usbmisc_imx_probe(struct platform_device *pdev)
 	int ret;
 	struct of_device_id *tmp_dev;
 
-	if (usbmisc)
-		return -EBUSY;
-
 	data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
 	if (!data)
 		return -ENOMEM;
@@ -325,15 +355,15 @@ static int usbmisc_imx_probe(struct platform_device *pdev)
 	tmp_dev = (struct of_device_id *)
 		of_match_device(usbmisc_imx_dt_ids, &pdev->dev);
 	data->ops = (const struct usbmisc_ops *)tmp_dev->data;
-	usbmisc = data;
+	platform_set_drvdata(pdev, data);
 
 	return 0;
 }
 
 static int usbmisc_imx_remove(struct platform_device *pdev)
 {
+	struct imx_usbmisc *usbmisc = dev_get_drvdata(&pdev->dev);
 	clk_disable_unprepare(usbmisc->clk);
-	usbmisc = NULL;
 	return 0;
 }
 
diff --git a/drivers/usb/common/Makefile b/drivers/usb/common/Makefile
index 752646167e1e..ca2f8bd0e431 100644
--- a/drivers/usb/common/Makefile
+++ b/drivers/usb/common/Makefile
@@ -2,5 +2,8 @@
 # Makefile for the usb common parts.
 #
 
-obj-$(CONFIG_USB_COMMON) += usb-common.o
+obj-$(CONFIG_USB_COMMON)	  += usb-common.o
+usb-common-y			  += common.o
+usb-common-$(CONFIG_USB_LED_TRIG) += led.o
+
 obj-$(CONFIG_USB_OTG_FSM) += usb-otg-fsm.o
diff --git a/drivers/usb/common/usb-common.c b/drivers/usb/common/common.c
index 6dfd30a863c7..b530fd403ffb 100644
--- a/drivers/usb/common/usb-common.c
+++ b/drivers/usb/common/common.c
@@ -139,6 +139,21 @@ enum usb_device_speed of_usb_get_maximum_speed(struct device_node *np)
 }
 EXPORT_SYMBOL_GPL(of_usb_get_maximum_speed);
 
+/**
+ * of_usb_host_tpl_support - to get if Targeted Peripheral List is supported
+ * for given targeted hosts (non-PC hosts)
+ * @np: Pointer to the given device_node
+ *
+ * The function gets if the targeted hosts support TPL or not
+ */
+bool of_usb_host_tpl_support(struct device_node *np)
+{
+	if (of_find_property(np, "tpl-support", NULL))
+		return true;
+
+	return false;
+}
+EXPORT_SYMBOL_GPL(of_usb_host_tpl_support);
 #endif
 
 MODULE_LICENSE("GPL");
diff --git a/drivers/usb/common/led.c b/drivers/usb/common/led.c
new file mode 100644
index 000000000000..df23da00a901
--- /dev/null
+++ b/drivers/usb/common/led.c
@@ -0,0 +1,57 @@
+/*
+ * LED Triggers for USB Activity
+ *
+ * Copyright 2014 Michal Sojka <sojka@merica.cz>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/leds.h>
+#include <linux/usb.h>
+
+#define BLINK_DELAY 30
+
+static unsigned long usb_blink_delay = BLINK_DELAY;
+
+DEFINE_LED_TRIGGER(ledtrig_usb_gadget);
+DEFINE_LED_TRIGGER(ledtrig_usb_host);
+
+void usb_led_activity(enum usb_led_event ev)
+{
+	struct led_trigger *trig = NULL;
+
+	switch (ev) {
+	case USB_LED_EVENT_GADGET:
+		trig = ledtrig_usb_gadget;
+		break;
+	case USB_LED_EVENT_HOST:
+		trig = ledtrig_usb_host;
+		break;
+	}
+	/* led_trigger_blink_oneshot() handles trig == NULL gracefully */
+	led_trigger_blink_oneshot(trig, &usb_blink_delay, &usb_blink_delay, 0);
+}
+EXPORT_SYMBOL_GPL(usb_led_activity);
+
+
+static int __init ledtrig_usb_init(void)
+{
+	led_trigger_register_simple("usb-gadget", &ledtrig_usb_gadget);
+	led_trigger_register_simple("usb-host", &ledtrig_usb_host);
+	return 0;
+}
+
+static void __exit ledtrig_usb_exit(void)
+{
+	led_trigger_unregister_simple(ledtrig_usb_gadget);
+	led_trigger_unregister_simple(ledtrig_usb_host);
+}
+
+module_init(ledtrig_usb_init);
+module_exit(ledtrig_usb_exit);
diff --git a/drivers/usb/core/Kconfig b/drivers/usb/core/Kconfig
index 1060657ca1b0..9cfda6a72194 100644
--- a/drivers/usb/core/Kconfig
+++ b/drivers/usb/core/Kconfig
@@ -56,22 +56,16 @@ config USB_OTG
 	  connector.
 
 config USB_OTG_WHITELIST
-	bool "Rely on OTG Targeted Peripherals List"
-	depends on USB_OTG || EXPERT
-	default y if USB_OTG
+	bool "Rely on OTG and EH Targeted Peripherals List"
+	depends on USB
 	help
 	  If you say Y here, the "otg_whitelist.h" file will be used as a
 	  product whitelist, so USB peripherals not listed there will be
 	  rejected during enumeration.  This behavior is required by the
-	  USB OTG specification for all devices not on your product's
+	  USB OTG and EH specification for all devices not on your product's
 	  "Targeted Peripherals List".  "Embedded Hosts" are likewise
 	  allowed to support only a limited number of peripherals.
 
-	  Otherwise, peripherals not listed there will only generate a
-	  warning and enumeration will continue.  That's more like what
-	  normal Linux-USB hosts do (other than the warning), and is
-	  convenient for many stages of product development.
-
 config USB_OTG_BLACKLIST_HUB
 	bool "Disable external hubs"
 	depends on USB_OTG || EXPERT
diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c
index 487abcfcccd8..b84fb141e122 100644
--- a/drivers/usb/core/hcd.c
+++ b/drivers/usb/core/hcd.c
@@ -42,6 +42,7 @@
 #include <linux/pm_runtime.h>
 #include <linux/types.h>
 
+#include <linux/phy/phy.h>
 #include <linux/usb.h>
 #include <linux/usb/hcd.h>
 #include <linux/usb/phy.h>
@@ -1272,7 +1273,7 @@ EXPORT_SYMBOL_GPL(usb_hcd_unlink_urb_from_ep);
  * The usb core itself is however optimized for host controllers that can dma
  * using regular system memory - like pci devices doing bus mastering.
  *
- * To support host controllers with limited dma capabilites we provide dma
+ * To support host controllers with limited dma capabilities we provide dma
  * bounce buffers. This feature can be enabled using the HCD_LOCAL_MEM flag.
  * For this to work properly the host controller code must first use the
  * function dma_declare_coherent_memory() to point out which memory area
@@ -1664,6 +1665,8 @@ static void __usb_hcd_giveback_urb(struct urb *urb)
 	usbmon_urb_complete(&hcd->self, urb, status);
 	usb_anchor_suspend_wakeups(anchor);
 	usb_unanchor_urb(urb);
+	if (likely(status == 0))
+		usb_led_activity(USB_LED_EVENT_HOST);
 
 	/* pass ownership to the completion handler */
 	urb->status = status;
@@ -2301,7 +2304,7 @@ EXPORT_SYMBOL_GPL(usb_hcd_resume_root_hub);
  * Context: in_interrupt()
  *
  * Starts enumeration, with an immediate reset followed later by
- * khubd identifying and possibly configuring the device.
+ * hub_wq identifying and possibly configuring the device.
  * This is needed by OTG controller drivers, where it helps meet
  * HNP protocol timing requirements for starting a port reset.
  *
@@ -2320,7 +2323,7 @@ int usb_bus_start_enum(struct usb_bus *bus, unsigned port_num)
 	if (port_num && hcd->driver->start_port_reset)
 		status = hcd->driver->start_port_reset(hcd, port_num);
 
-	/* run khubd shortly after (first) root port reset finishes;
+	/* allocate hub_wq shortly after (first) root port reset finishes;
 	 * it may issue others, until at least 50 msecs have passed.
 	 */
 	if (status == 0)
@@ -2383,20 +2386,20 @@ void usb_hc_died (struct usb_hcd *hcd)
 	if (hcd->rh_registered) {
 		clear_bit(HCD_FLAG_POLL_RH, &hcd->flags);
 
-		/* make khubd clean up old urbs and devices */
+		/* make hub_wq clean up old urbs and devices */
 		usb_set_device_state (hcd->self.root_hub,
 				USB_STATE_NOTATTACHED);
-		usb_kick_khubd (hcd->self.root_hub);
+		usb_kick_hub_wq(hcd->self.root_hub);
 	}
 	if (usb_hcd_is_primary_hcd(hcd) && hcd->shared_hcd) {
 		hcd = hcd->shared_hcd;
 		if (hcd->rh_registered) {
 			clear_bit(HCD_FLAG_POLL_RH, &hcd->flags);
 
-			/* make khubd clean up old urbs and devices */
+			/* make hub_wq clean up old urbs and devices */
 			usb_set_device_state(hcd->self.root_hub,
 					USB_STATE_NOTATTACHED);
-			usb_kick_khubd(hcd->self.root_hub);
+			usb_kick_hub_wq(hcd->self.root_hub);
 		}
 	}
 	spin_unlock_irqrestore (&hcd_root_hub_lock, flags);
@@ -2627,7 +2630,7 @@ int usb_add_hcd(struct usb_hcd *hcd,
 	int retval;
 	struct usb_device *rhdev;
 
-	if (IS_ENABLED(CONFIG_USB_PHY) && !hcd->phy) {
+	if (IS_ENABLED(CONFIG_USB_PHY) && !hcd->usb_phy) {
 		struct usb_phy *phy = usb_get_phy_dev(hcd->self.controller, 0);
 
 		if (IS_ERR(phy)) {
@@ -2640,11 +2643,34 @@ int usb_add_hcd(struct usb_hcd *hcd,
 				usb_put_phy(phy);
 				return retval;
 			}
-			hcd->phy = phy;
+			hcd->usb_phy = phy;
 			hcd->remove_phy = 1;
 		}
 	}
 
+	if (IS_ENABLED(CONFIG_GENERIC_PHY)) {
+		struct phy *phy = phy_get(hcd->self.controller, "usb");
+
+		if (IS_ERR(phy)) {
+			retval = PTR_ERR(phy);
+			if (retval == -EPROBE_DEFER)
+				goto err_phy;
+		} else {
+			retval = phy_init(phy);
+			if (retval) {
+				phy_put(phy);
+				goto err_phy;
+			}
+			retval = phy_power_on(phy);
+			if (retval) {
+				phy_exit(phy);
+				phy_put(phy);
+				goto err_phy;
+			}
+			hcd->phy = phy;
+		}
+	}
+
 	dev_info(hcd->self.controller, "%s\n", hcd->product_desc);
 
 	/* Keep old behaviour if authorized_default is not in [0, 1]. */
@@ -2655,12 +2681,12 @@ int usb_add_hcd(struct usb_hcd *hcd,
 	set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
 
 	/* HC is in reset state, but accessible.  Now do the one-time init,
-	 * bottom up so that hcds can customize the root hubs before khubd
+	 * bottom up so that hcds can customize the root hubs before hub_wq
 	 * starts talking to them.  (Note, bus id is assigned early too.)
 	 */
 	if ((retval = hcd_buffer_create(hcd)) != 0) {
 		dev_dbg(hcd->self.controller, "pool alloc failed\n");
-		goto err_remove_phy;
+		goto err_create_buf;
 	}
 
 	if ((retval = usb_register_bus(&hcd->self)) < 0)
@@ -2787,12 +2813,19 @@ err_allocate_root_hub:
 	usb_deregister_bus(&hcd->self);
 err_register_bus:
 	hcd_buffer_destroy(hcd);
-err_remove_phy:
-	if (hcd->remove_phy && hcd->phy) {
-		usb_phy_shutdown(hcd->phy);
-		usb_put_phy(hcd->phy);
+err_create_buf:
+	if (IS_ENABLED(CONFIG_GENERIC_PHY) && hcd->phy) {
+		phy_power_off(hcd->phy);
+		phy_exit(hcd->phy);
+		phy_put(hcd->phy);
 		hcd->phy = NULL;
 	}
+err_phy:
+	if (hcd->remove_phy && hcd->usb_phy) {
+		usb_phy_shutdown(hcd->usb_phy);
+		usb_put_phy(hcd->usb_phy);
+		hcd->usb_phy = NULL;
+	}
 	return retval;
 }
 EXPORT_SYMBOL_GPL(usb_add_hcd);
@@ -2864,11 +2897,18 @@ void usb_remove_hcd(struct usb_hcd *hcd)
 
 	usb_deregister_bus(&hcd->self);
 	hcd_buffer_destroy(hcd);
-	if (hcd->remove_phy && hcd->phy) {
-		usb_phy_shutdown(hcd->phy);
-		usb_put_phy(hcd->phy);
+
+	if (IS_ENABLED(CONFIG_GENERIC_PHY) && hcd->phy) {
+		phy_power_off(hcd->phy);
+		phy_exit(hcd->phy);
+		phy_put(hcd->phy);
 		hcd->phy = NULL;
 	}
+	if (hcd->remove_phy && hcd->usb_phy) {
+		usb_phy_shutdown(hcd->usb_phy);
+		usb_put_phy(hcd->usb_phy);
+		hcd->usb_phy = NULL;
+	}
 
 	usb_put_invalidate_rhdev(hcd);
 }
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index d481c99a20d7..11e80ac31324 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -22,9 +22,8 @@
 #include <linux/usb/hcd.h>
 #include <linux/usb/otg.h>
 #include <linux/usb/quirks.h>
-#include <linux/kthread.h>
+#include <linux/workqueue.h>
 #include <linux/mutex.h>
-#include <linux/freezer.h>
 #include <linux/random.h>
 #include <linux/pm_qos.h>
 
@@ -32,6 +31,7 @@
 #include <asm/byteorder.h>
 
 #include "hub.h"
+#include "otg_whitelist.h"
 
 #define USB_VENDOR_GENESYS_LOGIC		0x05e3
 #define HUB_QUIRK_CHECK_PORT_AUTOSUSPEND	0x01
@@ -41,14 +41,9 @@
  * change to USB_STATE_NOTATTACHED even when the semaphore isn't held. */
 static DEFINE_SPINLOCK(device_state_lock);
 
-/* khubd's worklist and its lock */
-static DEFINE_SPINLOCK(hub_event_lock);
-static LIST_HEAD(hub_event_list);	/* List of hubs needing servicing */
-
-/* Wakes up khubd */
-static DECLARE_WAIT_QUEUE_HEAD(khubd_wait);
-
-static struct task_struct *khubd_task;
+/* workqueue to process hub events */
+static struct workqueue_struct *hub_wq;
+static void hub_event(struct work_struct *work);
 
 /* synchronize hub-port add/remove and peering operations */
 DEFINE_MUTEX(usb_port_peer_mutex);
@@ -104,6 +99,7 @@ EXPORT_SYMBOL_GPL(ehci_cf_port_reset_rwsem);
 #define HUB_DEBOUNCE_STEP	  25
 #define HUB_DEBOUNCE_STABLE	 100
 
+static void hub_release(struct kref *kref);
 static int usb_reset_and_verify_device(struct usb_device *udev);
 
 static inline char *portspeed(struct usb_hub *hub, int portstatus)
@@ -575,28 +571,39 @@ static int hub_port_status(struct usb_hub *hub, int port1,
 	return ret;
 }
 
-static void kick_khubd(struct usb_hub *hub)
+static void kick_hub_wq(struct usb_hub *hub)
 {
-	unsigned long	flags;
+	struct usb_interface *intf;
 
-	spin_lock_irqsave(&hub_event_lock, flags);
-	if (!hub->disconnected && list_empty(&hub->event_list)) {
-		list_add_tail(&hub->event_list, &hub_event_list);
+	if (hub->disconnected || work_pending(&hub->events))
+		return;
 
-		/* Suppress autosuspend until khubd runs */
-		usb_autopm_get_interface_no_resume(
-				to_usb_interface(hub->intfdev));
-		wake_up(&khubd_wait);
-	}
-	spin_unlock_irqrestore(&hub_event_lock, flags);
+	/*
+	 * Suppress autosuspend until the event is proceed.
+	 *
+	 * Be careful and make sure that the symmetric operation is
+	 * always called. We are here only when there is no pending
+	 * work for this hub. Therefore put the interface either when
+	 * the new work is called or when it is canceled.
+	 */
+	intf = to_usb_interface(hub->intfdev);
+	usb_autopm_get_interface_no_resume(intf);
+	kref_get(&hub->kref);
+
+	if (queue_work(hub_wq, &hub->events))
+		return;
+
+	/* the work has already been scheduled */
+	usb_autopm_put_interface_async(intf);
+	kref_put(&hub->kref, hub_release);
 }
 
-void usb_kick_khubd(struct usb_device *hdev)
+void usb_kick_hub_wq(struct usb_device *hdev)
 {
 	struct usb_hub *hub = usb_hub_to_struct_hub(hdev);
 
 	if (hub)
-		kick_khubd(hub);
+		kick_hub_wq(hub);
 }
 
 /*
@@ -618,7 +625,7 @@ void usb_wakeup_notification(struct usb_device *hdev,
 	hub = usb_hub_to_struct_hub(hdev);
 	if (hub) {
 		set_bit(portnum, hub->wakeup_bits);
-		kick_khubd(hub);
+		kick_hub_wq(hub);
 	}
 }
 EXPORT_SYMBOL_GPL(usb_wakeup_notification);
@@ -645,7 +652,7 @@ static void hub_irq(struct urb *urb)
 		hub->error = status;
 		/* FALL THROUGH */
 
-	/* let khubd handle things */
+	/* let hub_wq handle things */
 	case 0:			/* we got data:  port status changed */
 		bits = 0;
 		for (i = 0; i < urb->actual_length; ++i)
@@ -657,8 +664,8 @@ static void hub_irq(struct urb *urb)
 
 	hub->nerrors = 0;
 
-	/* Something happened, let khubd figure it out */
-	kick_khubd(hub);
+	/* Something happened, let hub_wq figure it out */
+	kick_hub_wq(hub);
 
 resubmit:
 	if (hub->quiescing)
@@ -688,7 +695,7 @@ hub_clear_tt_buffer (struct usb_device *hdev, u16 devinfo, u16 tt)
 }
 
 /*
- * enumeration blocks khubd for a long time. we use keventd instead, since
+ * enumeration blocks hub_wq for a long time. we use keventd instead, since
  * long blocking there is the exception, not the rule.  accordingly, HCDs
  * talking to TTs must queue control transfers (not just bulk and iso), so
  * both can talk to the same hub concurrently.
@@ -954,7 +961,7 @@ static int hub_port_disable(struct usb_hub *hub, int port1, int set_state)
 
 /*
  * Disable a port and mark a logical connect-change event, so that some
- * time later khubd will disconnect() any existing usb_device on the port
+ * time later hub_wq will disconnect() any existing usb_device on the port
  * and will re-enumerate if there actually is a device attached.
  */
 static void hub_port_logical_disconnect(struct usb_hub *hub, int port1)
@@ -967,12 +974,12 @@ static void hub_port_logical_disconnect(struct usb_hub *hub, int port1)
 	 *  - SRP saves power that way
 	 *  - ... new call, TBD ...
 	 * That's easy if this hub can switch power per-port, and
-	 * khubd reactivates the port later (timer, SRP, etc).
+	 * hub_wq reactivates the port later (timer, SRP, etc).
 	 * Powerdown must be optional, because of reset/DFU.
 	 */
 
 	set_bit(port1, hub->change_bits);
-	kick_khubd(hub);
+	kick_hub_wq(hub);
 }
 
 /**
@@ -980,7 +987,7 @@ static void hub_port_logical_disconnect(struct usb_hub *hub, int port1)
  * @udev: device to be disabled and removed
  * Context: @udev locked, must be able to sleep.
  *
- * After @udev's port has been disabled, khubd is notified and it will
+ * After @udev's port has been disabled, hub_wq is notified and it will
  * see that the device has been disconnected.  When the device is
  * physically unplugged and something is plugged in, the events will
  * be received and processed normally.
@@ -1100,7 +1107,7 @@ static void hub_activate(struct usb_hub *hub, enum hub_activation_type type)
  init2:
 
 	/*
-	 * Check each port and set hub->change_bits to let khubd know
+	 * Check each port and set hub->change_bits to let hub_wq know
 	 * which ports need attention.
 	 */
 	for (port1 = 1; port1 <= hdev->maxchild; ++port1) {
@@ -1167,7 +1174,7 @@ static void hub_activate(struct usb_hub *hub, enum hub_activation_type type)
 			clear_bit(port1, hub->removed_bits);
 
 		if (!udev || udev->state == USB_STATE_NOTATTACHED) {
-			/* Tell khubd to disconnect the device or
+			/* Tell hub_wq to disconnect the device or
 			 * check for a new connection
 			 */
 			if (udev || (portstatus & USB_PORT_STAT_CONNECTION) ||
@@ -1180,7 +1187,7 @@ static void hub_activate(struct usb_hub *hub, enum hub_activation_type type)
 				USB_SS_PORT_LS_U0;
 			/* The power session apparently survived the resume.
 			 * If there was an overcurrent or suspend change
-			 * (i.e., remote wakeup request), have khubd
+			 * (i.e., remote wakeup request), have hub_wq
 			 * take care of it.  Look at the port link state
 			 * for USB 3.0 hubs, since they don't have a suspend
 			 * change bit, and they don't set the port link change
@@ -1201,7 +1208,7 @@ static void hub_activate(struct usb_hub *hub, enum hub_activation_type type)
 				set_bit(port1, hub->change_bits);
 
 		} else {
-			/* The power session is gone; tell khubd */
+			/* The power session is gone; tell hub_wq */
 			usb_set_device_state(udev, USB_STATE_NOTATTACHED);
 			set_bit(port1, hub->change_bits);
 		}
@@ -1209,10 +1216,10 @@ static void hub_activate(struct usb_hub *hub, enum hub_activation_type type)
 
 	/* If no port-status-change flags were set, we don't need any
 	 * debouncing.  If flags were set we can try to debounce the
-	 * ports all at once right now, instead of letting khubd do them
+	 * ports all at once right now, instead of letting hub_wq do them
 	 * one at a time later on.
 	 *
-	 * If any port-status changes do occur during this delay, khubd
+	 * If any port-status changes do occur during this delay, hub_wq
 	 * will see them later and handle them normally.
 	 */
 	if (need_debounce_delay) {
@@ -1240,7 +1247,7 @@ static void hub_activate(struct usb_hub *hub, enum hub_activation_type type)
 				&hub->leds, LED_CYCLE_PERIOD);
 
 	/* Scan all ports that need attention */
-	kick_khubd(hub);
+	kick_hub_wq(hub);
 
 	/* Allow autosuspend if it was suppressed */
 	if (type <= HUB_INIT3)
@@ -1273,7 +1280,7 @@ static void hub_quiesce(struct usb_hub *hub, enum hub_quiescing_type type)
 
 	cancel_delayed_work_sync(&hub->init_work);
 
-	/* khubd and related activity won't re-trigger */
+	/* hub_wq and related activity won't re-trigger */
 	hub->quiescing = 1;
 
 	if (type != HUB_SUSPEND) {
@@ -1284,7 +1291,7 @@ static void hub_quiesce(struct usb_hub *hub, enum hub_quiescing_type type)
 		}
 	}
 
-	/* Stop khubd and related activity */
+	/* Stop hub_wq and related activity */
 	usb_kill_urb(hub->urb);
 	if (hub->has_indicators)
 		cancel_delayed_work_sync(&hub->leds);
@@ -1606,7 +1613,7 @@ static int hub_configure(struct usb_hub *hub,
 	if (ret < 0)
 		goto fail;
 
-	/* Update the HCD's internal representation of this hub before khubd
+	/* Update the HCD's internal representation of this hub before hub_wq
 	 * starts getting port status changes for devices under the hub.
 	 */
 	if (hcd->driver->update_hub_device) {
@@ -1634,6 +1641,7 @@ static void hub_release(struct kref *kref)
 {
 	struct usb_hub *hub = container_of(kref, struct usb_hub, kref);
 
+	usb_put_dev(hub->hdev);
 	usb_put_intf(to_usb_interface(hub->intfdev));
 	kfree(hub);
 }
@@ -1646,14 +1654,11 @@ static void hub_disconnect(struct usb_interface *intf)
 	struct usb_device *hdev = interface_to_usbdev(intf);
 	int port1;
 
-	/* Take the hub off the event list and don't let it be added again */
-	spin_lock_irq(&hub_event_lock);
-	if (!list_empty(&hub->event_list)) {
-		list_del_init(&hub->event_list);
-		usb_autopm_put_interface_no_suspend(intf);
-	}
+	/*
+	 * Stop adding new hub events. We do not want to block here and thus
+	 * will not try to remove any pending work item.
+	 */
 	hub->disconnected = 1;
-	spin_unlock_irq(&hub_event_lock);
 
 	/* Disconnect all children and quiesce the hub */
 	hub->error = 0;
@@ -1793,12 +1798,13 @@ descriptor_error:
 	}
 
 	kref_init(&hub->kref);
-	INIT_LIST_HEAD(&hub->event_list);
 	hub->intfdev = &intf->dev;
 	hub->hdev = hdev;
 	INIT_DELAYED_WORK(&hub->leds, led_work);
 	INIT_DELAYED_WORK(&hub->init_work, NULL);
+	INIT_WORK(&hub->events, hub_event);
 	usb_get_intf(intf);
+	usb_get_dev(hdev);
 
 	usb_set_intfdata (intf, hub);
 	intf->needs_remote_wakeup = 1;
@@ -1983,8 +1989,10 @@ void usb_set_device_state(struct usb_device *udev,
 					|| new_state == USB_STATE_SUSPENDED)
 				;	/* No change to wakeup settings */
 			else if (new_state == USB_STATE_CONFIGURED)
-				wakeup = udev->actconfig->desc.bmAttributes
-					 & USB_CONFIG_ATT_WAKEUP;
+				wakeup = (udev->quirks &
+					USB_QUIRK_IGNORE_REMOTE_WAKEUP) ? 0 :
+					udev->actconfig->desc.bmAttributes &
+					USB_CONFIG_ATT_WAKEUP;
 			else
 				wakeup = 0;
 		}
@@ -2037,7 +2045,8 @@ static void choose_devnum(struct usb_device *udev)
 	int		devnum;
 	struct usb_bus	*bus = udev->bus;
 
-	/* If khubd ever becomes multithreaded, this will need a lock */
+	/* be safe when more hub events are proceed in parallel */
+	mutex_lock(&bus->usb_address0_mutex);
 	if (udev->wusb) {
 		devnum = udev->portnum + 1;
 		BUG_ON(test_bit(devnum, bus->devmap.devicemap));
@@ -2055,6 +2064,7 @@ static void choose_devnum(struct usb_device *udev)
 		set_bit(devnum, bus->devmap.devicemap);
 		udev->devnum = devnum;
 	}
+	mutex_unlock(&bus->usb_address0_mutex);
 }
 
 static void release_devnum(struct usb_device *udev)
@@ -2205,9 +2215,6 @@ static void announce_device(struct usb_device *udev)
 static inline void announce_device(struct usb_device *udev) { }
 #endif
 
-#ifdef	CONFIG_USB_OTG
-#include "otg_whitelist.h"
-#endif
 
 /**
  * usb_enumerate_device_otg - FIXME (usbcore-internal)
@@ -2267,21 +2274,6 @@ static int usb_enumerate_device_otg(struct usb_device *udev)
 			}
 		}
 	}
-
-	if (!is_targeted(udev)) {
-
-		/* Maybe it can talk to us, though we can't talk to it.
-		 * (Includes HNP test device.)
-		 */
-		if (udev->bus->b_hnp_enable || udev->bus->is_b_host) {
-			err = usb_port_suspend(udev, PMSG_SUSPEND);
-			if (err < 0)
-				dev_dbg(&udev->dev, "HNP fail, %d\n", err);
-		}
-		err = -ENOTSUPP;
-		goto fail;
-	}
-fail:
 #endif
 	return err;
 }
@@ -2304,6 +2296,7 @@ fail:
 static int usb_enumerate_device(struct usb_device *udev)
 {
 	int err;
+	struct usb_hcd *hcd = bus_to_hcd(udev->bus);
 
 	if (udev->config == NULL) {
 		err = usb_get_configuration(udev);
@@ -2325,6 +2318,20 @@ static int usb_enumerate_device(struct usb_device *udev)
 	if (err < 0)
 		return err;
 
+	if (IS_ENABLED(CONFIG_USB_OTG_WHITELIST) && hcd->tpl_support &&
+		!is_targeted(udev)) {
+		/* Maybe it can talk to us, though we can't talk to it.
+		 * (Includes HNP test device.)
+		 */
+		if (IS_ENABLED(CONFIG_USB_OTG) && (udev->bus->b_hnp_enable
+			|| udev->bus->is_b_host)) {
+			err = usb_port_suspend(udev, PMSG_AUTO_SUSPEND);
+			if (err < 0)
+				dev_dbg(&udev->dev, "HNP fail, %d\n", err);
+		}
+		return -ENOTSUPP;
+	}
+
 	usb_detect_interface_quirks(udev);
 
 	return 0;
@@ -3070,7 +3077,7 @@ static unsigned wakeup_enabled_descendants(struct usb_device *udev)
  * Once VBUS drop breaks the circuit, the port it's using has to go through
  * normal re-enumeration procedures, starting with enabling VBUS power.
  * Other than re-initializing the hub (plug/unplug, except for root hubs),
- * Linux (2.6) currently has NO mechanisms to initiate that:  no khubd
+ * Linux (2.6) currently has NO mechanisms to initiate that:  no hub_wq
  * timer, no SRP, no requests through sysfs.
  *
  * If Runtime PM isn't enabled or used, non-SuperSpeed devices may not get
@@ -3212,7 +3219,7 @@ static int finish_port_resume(struct usb_device *udev)
 	/* usb ch9 identifies four variants of SUSPENDED, based on what
 	 * state the device resumes to.  Linux currently won't see the
 	 * first two on the host side; they'd be inside hub_port_init()
-	 * during many timeouts, but khubd can't suspend until later.
+	 * during many timeouts, but hub_wq can't suspend until later.
 	 */
 	usb_set_device_state(udev, udev->actconfig
 			? USB_STATE_CONFIGURED
@@ -3577,7 +3584,7 @@ static int hub_suspend(struct usb_interface *intf, pm_message_t msg)
 
 	dev_dbg(&intf->dev, "%s\n", __func__);
 
-	/* stop khubd and related activity */
+	/* stop hub_wq and related activity */
 	hub_quiesce(hub, HUB_SUSPEND);
 	return 0;
 }
@@ -4461,8 +4468,8 @@ hub_port_init (struct usb_hub *hub, struct usb_device *udev, int port1,
 	if (retval)
 		goto fail;
 
-	if (hcd->phy && !hdev->parent)
-		usb_phy_notify_connect(hcd->phy, udev->speed);
+	if (hcd->usb_phy && !hdev->parent)
+		usb_phy_notify_connect(hcd->usb_phy, udev->speed);
 
 	/*
 	 * Some superspeed devices have finished the link training process
@@ -4538,6 +4545,9 @@ check_highspeed (struct usb_hub *hub, struct usb_device *udev, int port1)
 	struct usb_qualifier_descriptor	*qual;
 	int				status;
 
+	if (udev->quirks & USB_QUIRK_DEVICE_QUALIFIER)
+		return;
+
 	qual = kmalloc (sizeof *qual, GFP_KERNEL);
 	if (qual == NULL)
 		return;
@@ -4617,9 +4627,9 @@ static void hub_port_connect(struct usb_hub *hub, int port1, u16 portstatus,
 
 	/* Disconnect any existing devices under this port */
 	if (udev) {
-		if (hcd->phy && !hdev->parent &&
+		if (hcd->usb_phy && !hdev->parent &&
 				!(portstatus & USB_PORT_STAT_CONNECTION))
-			usb_phy_notify_disconnect(hcd->phy, udev->speed);
+			usb_phy_notify_disconnect(hcd->usb_phy, udev->speed);
 		usb_disconnect(&port_dev->child);
 	}
 
@@ -4970,10 +4980,10 @@ static void port_event(struct usb_hub *hub, int port1)
 	 * On disconnect USB3 protocol ports transit from U0 to
 	 * SS.Inactive to Rx.Detect. If this happens a warm-
 	 * reset is not needed, but a (re)connect may happen
-	 * before khubd runs and sees the disconnect, and the
+	 * before hub_wq runs and sees the disconnect, and the
 	 * device may be an unknown state.
 	 *
-	 * If the port went through SS.Inactive without khubd
+	 * If the port went through SS.Inactive without hub_wq
 	 * seeing it the C_LINK_STATE change flag will be set,
 	 * and we reset the dev to put it in a known state.
 	 */
@@ -4992,10 +5002,8 @@ static void port_event(struct usb_hub *hub, int port1)
 		hub_port_connect_change(hub, port1, portstatus, portchange);
 }
 
-
-static void hub_events(void)
+static void hub_event(struct work_struct *work)
 {
-	struct list_head *tmp;
 	struct usb_device *hdev;
 	struct usb_interface *intf;
 	struct usb_hub *hub;
@@ -5004,166 +5012,117 @@ static void hub_events(void)
 	u16 hubchange;
 	int i, ret;
 
-	/*
-	 *  We restart the list every time to avoid a deadlock with
-	 * deleting hubs downstream from this one. This should be
-	 * safe since we delete the hub from the event list.
-	 * Not the most efficient, but avoids deadlocks.
-	 */
-	while (1) {
+	hub = container_of(work, struct usb_hub, events);
+	hdev = hub->hdev;
+	hub_dev = hub->intfdev;
+	intf = to_usb_interface(hub_dev);
+
+	dev_dbg(hub_dev, "state %d ports %d chg %04x evt %04x\n",
+			hdev->state, hdev->maxchild,
+			/* NOTE: expects max 15 ports... */
+			(u16) hub->change_bits[0],
+			(u16) hub->event_bits[0]);
+
+	/* Lock the device, then check to see if we were
+	 * disconnected while waiting for the lock to succeed. */
+	usb_lock_device(hdev);
+	if (unlikely(hub->disconnected))
+		goto out_hdev_lock;
+
+	/* If the hub has died, clean up after it */
+	if (hdev->state == USB_STATE_NOTATTACHED) {
+		hub->error = -ENODEV;
+		hub_quiesce(hub, HUB_DISCONNECT);
+		goto out_hdev_lock;
+	}
+
+	/* Autoresume */
+	ret = usb_autopm_get_interface(intf);
+	if (ret) {
+		dev_dbg(hub_dev, "Can't autoresume: %d\n", ret);
+		goto out_hdev_lock;
+	}
 
-		/* Grab the first entry at the beginning of the list */
-		spin_lock_irq(&hub_event_lock);
-		if (list_empty(&hub_event_list)) {
-			spin_unlock_irq(&hub_event_lock);
-			break;
-		}
+	/* If this is an inactive hub, do nothing */
+	if (hub->quiescing)
+		goto out_autopm;
 
-		tmp = hub_event_list.next;
-		list_del_init(tmp);
-
-		hub = list_entry(tmp, struct usb_hub, event_list);
-		kref_get(&hub->kref);
-		hdev = hub->hdev;
-		usb_get_dev(hdev);
-		spin_unlock_irq(&hub_event_lock);
-
-		hub_dev = hub->intfdev;
-		intf = to_usb_interface(hub_dev);
-		dev_dbg(hub_dev, "state %d ports %d chg %04x evt %04x\n",
-				hdev->state, hdev->maxchild,
-				/* NOTE: expects max 15 ports... */
-				(u16) hub->change_bits[0],
-				(u16) hub->event_bits[0]);
-
-		/* Lock the device, then check to see if we were
-		 * disconnected while waiting for the lock to succeed. */
-		usb_lock_device(hdev);
-		if (unlikely(hub->disconnected))
-			goto loop_disconnected;
-
-		/* If the hub has died, clean up after it */
-		if (hdev->state == USB_STATE_NOTATTACHED) {
-			hub->error = -ENODEV;
-			hub_quiesce(hub, HUB_DISCONNECT);
-			goto loop;
-		}
+	if (hub->error) {
+		dev_dbg(hub_dev, "resetting for error %d\n", hub->error);
 
-		/* Autoresume */
-		ret = usb_autopm_get_interface(intf);
+		ret = usb_reset_device(hdev);
 		if (ret) {
-			dev_dbg(hub_dev, "Can't autoresume: %d\n", ret);
-			goto loop;
+			dev_dbg(hub_dev, "error resetting hub: %d\n", ret);
+			goto out_autopm;
 		}
 
-		/* If this is an inactive hub, do nothing */
-		if (hub->quiescing)
-			goto loop_autopm;
-
-		if (hub->error) {
-			dev_dbg (hub_dev, "resetting for error %d\n",
-				hub->error);
+		hub->nerrors = 0;
+		hub->error = 0;
+	}
 
-			ret = usb_reset_device(hdev);
-			if (ret) {
-				dev_dbg (hub_dev,
-					"error resetting hub: %d\n", ret);
-				goto loop_autopm;
-			}
+	/* deal with port status changes */
+	for (i = 1; i <= hdev->maxchild; i++) {
+		struct usb_port *port_dev = hub->ports[i - 1];
 
-			hub->nerrors = 0;
-			hub->error = 0;
+		if (test_bit(i, hub->event_bits)
+				|| test_bit(i, hub->change_bits)
+				|| test_bit(i, hub->wakeup_bits)) {
+			/*
+			 * The get_noresume and barrier ensure that if
+			 * the port was in the process of resuming, we
+			 * flush that work and keep the port active for
+			 * the duration of the port_event().  However,
+			 * if the port is runtime pm suspended
+			 * (powered-off), we leave it in that state, run
+			 * an abbreviated port_event(), and move on.
+			 */
+			pm_runtime_get_noresume(&port_dev->dev);
+			pm_runtime_barrier(&port_dev->dev);
+			usb_lock_port(port_dev);
+			port_event(hub, i);
+			usb_unlock_port(port_dev);
+			pm_runtime_put_sync(&port_dev->dev);
 		}
+	}
 
-		/* deal with port status changes */
-		for (i = 1; i <= hdev->maxchild; i++) {
-			struct usb_port *port_dev = hub->ports[i - 1];
-
-			if (test_bit(i, hub->event_bits)
-					|| test_bit(i, hub->change_bits)
-					|| test_bit(i, hub->wakeup_bits)) {
-				/*
-				 * The get_noresume and barrier ensure that if
-				 * the port was in the process of resuming, we
-				 * flush that work and keep the port active for
-				 * the duration of the port_event().  However,
-				 * if the port is runtime pm suspended
-				 * (powered-off), we leave it in that state, run
-				 * an abbreviated port_event(), and move on.
-				 */
-				pm_runtime_get_noresume(&port_dev->dev);
-				pm_runtime_barrier(&port_dev->dev);
-				usb_lock_port(port_dev);
-				port_event(hub, i);
-				usb_unlock_port(port_dev);
-				pm_runtime_put_sync(&port_dev->dev);
-			}
+	/* deal with hub status changes */
+	if (test_and_clear_bit(0, hub->event_bits) == 0)
+		;	/* do nothing */
+	else if (hub_hub_status(hub, &hubstatus, &hubchange) < 0)
+		dev_err(hub_dev, "get_hub_status failed\n");
+	else {
+		if (hubchange & HUB_CHANGE_LOCAL_POWER) {
+			dev_dbg(hub_dev, "power change\n");
+			clear_hub_feature(hdev, C_HUB_LOCAL_POWER);
+			if (hubstatus & HUB_STATUS_LOCAL_POWER)
+				/* FIXME: Is this always true? */
+				hub->limited_power = 1;
+			else
+				hub->limited_power = 0;
 		}
+		if (hubchange & HUB_CHANGE_OVERCURRENT) {
+			u16 status = 0;
+			u16 unused;
 
-		/* deal with hub status changes */
-		if (test_and_clear_bit(0, hub->event_bits) == 0)
-			;	/* do nothing */
-		else if (hub_hub_status(hub, &hubstatus, &hubchange) < 0)
-			dev_err (hub_dev, "get_hub_status failed\n");
-		else {
-			if (hubchange & HUB_CHANGE_LOCAL_POWER) {
-				dev_dbg (hub_dev, "power change\n");
-				clear_hub_feature(hdev, C_HUB_LOCAL_POWER);
-				if (hubstatus & HUB_STATUS_LOCAL_POWER)
-					/* FIXME: Is this always true? */
-					hub->limited_power = 1;
-				else
-					hub->limited_power = 0;
-			}
-			if (hubchange & HUB_CHANGE_OVERCURRENT) {
-				u16 status = 0;
-				u16 unused;
-
-				dev_dbg(hub_dev, "over-current change\n");
-				clear_hub_feature(hdev, C_HUB_OVER_CURRENT);
-				msleep(500);	/* Cool down */
-				hub_power_on(hub, true);
-				hub_hub_status(hub, &status, &unused);
-				if (status & HUB_STATUS_OVERCURRENT)
-					dev_err(hub_dev, "over-current "
-						"condition\n");
-			}
+			dev_dbg(hub_dev, "over-current change\n");
+			clear_hub_feature(hdev, C_HUB_OVER_CURRENT);
+			msleep(500);	/* Cool down */
+			hub_power_on(hub, true);
+			hub_hub_status(hub, &status, &unused);
+			if (status & HUB_STATUS_OVERCURRENT)
+				dev_err(hub_dev, "over-current condition\n");
 		}
+	}
 
- loop_autopm:
-		/* Balance the usb_autopm_get_interface() above */
-		usb_autopm_put_interface_no_suspend(intf);
- loop:
-		/* Balance the usb_autopm_get_interface_no_resume() in
-		 * kick_khubd() and allow autosuspend.
-		 */
-		usb_autopm_put_interface(intf);
- loop_disconnected:
-		usb_unlock_device(hdev);
-		usb_put_dev(hdev);
-		kref_put(&hub->kref, hub_release);
-
-	} /* end while (1) */
-}
-
-static int hub_thread(void *__unused)
-{
-	/* khubd needs to be freezable to avoid interfering with USB-PERSIST
-	 * port handover.  Otherwise it might see that a full-speed device
-	 * was gone before the EHCI controller had handed its port over to
-	 * the companion full-speed controller.
-	 */
-	set_freezable();
-
-	do {
-		hub_events();
-		wait_event_freezable(khubd_wait,
-				!list_empty(&hub_event_list) ||
-				kthread_should_stop());
-	} while (!kthread_should_stop() || !list_empty(&hub_event_list));
+out_autopm:
+	/* Balance the usb_autopm_get_interface() above */
+	usb_autopm_put_interface_no_suspend(intf);
+out_hdev_lock:
+	usb_unlock_device(hdev);
 
-	pr_debug("%s: khubd exiting\n", usbcore_name);
-	return 0;
+	/* Balance the stuff in kick_hub_wq() and allow autosuspend */
+	usb_autopm_put_interface(intf);
+	kref_put(&hub->kref, hub_release);
 }
 
 static const struct usb_device_id hub_id_table[] = {
@@ -5203,20 +5162,26 @@ int usb_hub_init(void)
 		return -1;
 	}
 
-	khubd_task = kthread_run(hub_thread, NULL, "khubd");
-	if (!IS_ERR(khubd_task))
+	/*
+	 * The workqueue needs to be freezable to avoid interfering with
+	 * USB-PERSIST port handover. Otherwise it might see that a full-speed
+	 * device was gone before the EHCI controller had handed its port
+	 * over to the companion full-speed controller.
+	 */
+	hub_wq = alloc_workqueue("usb_hub_wq", WQ_FREEZABLE, 0);
+	if (hub_wq)
 		return 0;
 
 	/* Fall through if kernel_thread failed */
 	usb_deregister(&hub_driver);
-	printk(KERN_ERR "%s: can't start khubd\n", usbcore_name);
+	pr_err("%s: can't allocate workqueue for usb hub\n", usbcore_name);
 
 	return -1;
 }
 
 void usb_hub_cleanup(void)
 {
-	kthread_stop(khubd_task);
+	destroy_workqueue(hub_wq);
 
 	/*
 	 * Hub resources are freed for us by usb_deregister. It calls
@@ -5325,7 +5290,7 @@ static int descriptors_changed(struct usb_device *udev,
  * former operating configuration.  If the reset fails, or the device's
  * descriptors change from their values before the reset, or the original
  * configuration and altsettings cannot be restored, a flag will be set
- * telling khubd to pretend the device has been disconnected and then
+ * telling hub_wq to pretend the device has been disconnected and then
  * re-connected.  All drivers will be unbound, and the device will be
  * re-enumerated and probed all over again.
  *
diff --git a/drivers/usb/core/hub.h b/drivers/usb/core/hub.h
index c77d8778af4b..688817fb3246 100644
--- a/drivers/usb/core/hub.h
+++ b/drivers/usb/core/hub.h
@@ -41,7 +41,6 @@ struct usb_hub {
 	int			error;		/* last reported error */
 	int			nerrors;	/* track consecutive errors */
 
-	struct list_head	event_list;	/* hubs w/data or errs ready */
 	unsigned long		event_bits[1];	/* status change bitmask */
 	unsigned long		change_bits[1];	/* ports with logical connect
 							status change */
@@ -77,6 +76,7 @@ struct usb_hub {
 	u8			indicator[USB_MAXCHILDREN];
 	struct delayed_work	leds;
 	struct delayed_work	init_work;
+	struct work_struct      events;
 	struct usb_port		**ports;
 };
 
diff --git a/drivers/usb/core/message.c b/drivers/usb/core/message.c
index 0c8a7fc4dad8..f7b7713cfb2a 100644
--- a/drivers/usb/core/message.c
+++ b/drivers/usb/core/message.c
@@ -770,9 +770,7 @@ static int usb_get_langid(struct usb_device *dev, unsigned char *tbuf)
 		dev->string_langid = 0x0409;
 		dev->have_langid = 1;
 		dev_err(&dev->dev,
-			"string descriptor 0 malformed (err = %d), "
-			"defaulting to 0x%04x\n",
-				err, dev->string_langid);
+			"language id specifier not provided by device, defaulting to English\n");
 		return 0;
 	}
 
diff --git a/drivers/usb/core/otg_whitelist.h b/drivers/usb/core/otg_whitelist.h
index e8cdce571bb1..de0c9c9d7091 100644
--- a/drivers/usb/core/otg_whitelist.h
+++ b/drivers/usb/core/otg_whitelist.h
@@ -10,8 +10,8 @@
  */
 
 /*
- * This OTG Whitelist is the OTG "Targeted Peripheral List".  It should
- * mostly use of USB_DEVICE() or USB_DEVICE_VER() entries..
+ * This OTG and Embedded Host Whitelist is "Targeted Peripheral List".
+ * It should mostly use of USB_DEVICE() or USB_DEVICE_VER() entries..
  *
  * YOU _SHOULD_ CHANGE THIS LIST TO MATCH YOUR PRODUCT AND ITS TESTING!
  */
@@ -50,10 +50,6 @@ static int is_targeted(struct usb_device *dev)
 {
 	struct usb_device_id	*id = whitelist_table;
 
-	/* possible in developer configs only! */
-	if (!dev->bus->otg_port)
-		return 1;
-
 	/* HNP test device is _never_ targeted (see OTG spec 6.6.6) */
 	if ((le16_to_cpu(dev->descriptor.idVendor) == 0x1a0a &&
 	     le16_to_cpu(dev->descriptor.idProduct) == 0xbadd))
@@ -103,10 +99,7 @@ static int is_targeted(struct usb_device *dev)
 	dev_err(&dev->dev, "device v%04x p%04x is not supported\n",
 		le16_to_cpu(dev->descriptor.idVendor),
 		le16_to_cpu(dev->descriptor.idProduct));
-#ifdef	CONFIG_USB_OTG_WHITELIST
+
 	return 0;
-#else
-	return 1;
-#endif
 }
 
diff --git a/drivers/usb/core/quirks.c b/drivers/usb/core/quirks.c
index bae636e2a1a3..5ae883dc21f5 100644
--- a/drivers/usb/core/quirks.c
+++ b/drivers/usb/core/quirks.c
@@ -93,6 +93,10 @@ static const struct usb_device_id usb_quirk_list[] = {
 	{ USB_DEVICE(0x04e8, 0x6601), .driver_info =
 			USB_QUIRK_CONFIG_INTF_STRINGS },
 
+	/* Elan Touchscreen */
+	{ USB_DEVICE(0x04f3, 0x0089), .driver_info =
+			USB_QUIRK_DEVICE_QUALIFIER },
+
 	/* Roland SC-8820 */
 	{ USB_DEVICE(0x0582, 0x0007), .driver_info = USB_QUIRK_RESET_RESUME },
 
@@ -159,6 +163,10 @@ static const struct usb_device_id usb_quirk_list[] = {
 	/* USB3503 */
 	{ USB_DEVICE(0x0424, 0x3503), .driver_info = USB_QUIRK_RESET_RESUME },
 
+	/* ASUS Base Station(T100) */
+	{ USB_DEVICE(0x0b05, 0x17e0), .driver_info =
+			USB_QUIRK_IGNORE_REMOTE_WAKEUP },
+
 	{ }  /* terminating entry must be last */
 };
 
diff --git a/drivers/usb/core/usb.h b/drivers/usb/core/usb.h
index d9d08720c386..b1b34d0557c9 100644
--- a/drivers/usb/core/usb.h
+++ b/drivers/usb/core/usb.h
@@ -48,7 +48,7 @@ static inline unsigned usb_get_max_power(struct usb_device *udev,
 	return c->desc.bMaxPower * mul;
 }
 
-extern void usb_kick_khubd(struct usb_device *dev);
+extern void usb_kick_hub_wq(struct usb_device *dev);
 extern int usb_match_one_id_intf(struct usb_device *dev,
 				 struct usb_host_interface *intf,
 				 const struct usb_device_id *id);
diff --git a/drivers/usb/dwc2/core.c b/drivers/usb/dwc2/core.c
index 27d2c9b8a034..d9269459d481 100644
--- a/drivers/usb/dwc2/core.c
+++ b/drivers/usb/dwc2/core.c
@@ -118,6 +118,7 @@ static int dwc2_core_reset(struct dwc2_hsotg *hsotg)
 {
 	u32 greset;
 	int count = 0;
+	u32 gusbcfg;
 
 	dev_vdbg(hsotg->dev, "%s()\n", __func__);
 
@@ -148,6 +149,23 @@ static int dwc2_core_reset(struct dwc2_hsotg *hsotg)
 		}
 	} while (greset & GRSTCTL_CSFTRST);
 
+	if (hsotg->dr_mode == USB_DR_MODE_HOST) {
+		gusbcfg = readl(hsotg->regs + GUSBCFG);
+		gusbcfg &= ~GUSBCFG_FORCEDEVMODE;
+		gusbcfg |= GUSBCFG_FORCEHOSTMODE;
+		writel(gusbcfg, hsotg->regs + GUSBCFG);
+	} else if (hsotg->dr_mode == USB_DR_MODE_PERIPHERAL) {
+		gusbcfg = readl(hsotg->regs + GUSBCFG);
+		gusbcfg &= ~GUSBCFG_FORCEHOSTMODE;
+		gusbcfg |= GUSBCFG_FORCEDEVMODE;
+		writel(gusbcfg, hsotg->regs + GUSBCFG);
+	} else if (hsotg->dr_mode == USB_DR_MODE_OTG) {
+		gusbcfg = readl(hsotg->regs + GUSBCFG);
+		gusbcfg &= ~GUSBCFG_FORCEHOSTMODE;
+		gusbcfg &= ~GUSBCFG_FORCEDEVMODE;
+		writel(gusbcfg, hsotg->regs + GUSBCFG);
+	}
+
 	/*
 	 * NOTE: This long sleep is _very_ important, otherwise the core will
 	 * not stay in host mode after a connector ID change!
@@ -2674,23 +2692,23 @@ int dwc2_get_hwparams(struct dwc2_hsotg *hsotg)
 	hwcfg2 = readl(hsotg->regs + GHWCFG2);
 	hwcfg3 = readl(hsotg->regs + GHWCFG3);
 	hwcfg4 = readl(hsotg->regs + GHWCFG4);
-	gnptxfsiz = readl(hsotg->regs + GNPTXFSIZ);
 	grxfsiz = readl(hsotg->regs + GRXFSIZ);
 
 	dev_dbg(hsotg->dev, "hwcfg1=%08x\n", hwcfg1);
 	dev_dbg(hsotg->dev, "hwcfg2=%08x\n", hwcfg2);
 	dev_dbg(hsotg->dev, "hwcfg3=%08x\n", hwcfg3);
 	dev_dbg(hsotg->dev, "hwcfg4=%08x\n", hwcfg4);
-	dev_dbg(hsotg->dev, "gnptxfsiz=%08x\n", gnptxfsiz);
 	dev_dbg(hsotg->dev, "grxfsiz=%08x\n", grxfsiz);
 
-	/* Force host mode to get HPTXFSIZ exact power on value */
+	/* Force host mode to get HPTXFSIZ / GNPTXFSIZ exact power on value */
 	gusbcfg = readl(hsotg->regs + GUSBCFG);
 	gusbcfg |= GUSBCFG_FORCEHOSTMODE;
 	writel(gusbcfg, hsotg->regs + GUSBCFG);
 	usleep_range(100000, 150000);
 
+	gnptxfsiz = readl(hsotg->regs + GNPTXFSIZ);
 	hptxfsiz = readl(hsotg->regs + HPTXFSIZ);
+	dev_dbg(hsotg->dev, "gnptxfsiz=%08x\n", gnptxfsiz);
 	dev_dbg(hsotg->dev, "hptxfsiz=%08x\n", hptxfsiz);
 	gusbcfg = readl(hsotg->regs + GUSBCFG);
 	gusbcfg &= ~GUSBCFG_FORCEHOSTMODE;
@@ -2725,6 +2743,13 @@ int dwc2_get_hwparams(struct dwc2_hsotg *hsotg)
 	width = (hwcfg3 & GHWCFG3_XFER_SIZE_CNTR_WIDTH_MASK) >>
 		GHWCFG3_XFER_SIZE_CNTR_WIDTH_SHIFT;
 	hw->max_transfer_size = (1 << (width + 11)) - 1;
+	/*
+	 * Clip max_transfer_size to 65535. dwc2_hc_setup_align_buf() allocates
+	 * coherent buffers with this size, and if it's too large we can
+	 * exhaust the coherent DMA pool.
+	 */
+	if (hw->max_transfer_size > 65535)
+		hw->max_transfer_size = 65535;
 	width = (hwcfg3 & GHWCFG3_PACKET_SIZE_CNTR_WIDTH_MASK) >>
 		GHWCFG3_PACKET_SIZE_CNTR_WIDTH_SHIFT;
 	hw->max_packet_count = (1 << (width + 4)) - 1;
diff --git a/drivers/usb/dwc2/core.h b/drivers/usb/dwc2/core.h
index 1efd10cc9629..bf015ab3b44c 100644
--- a/drivers/usb/dwc2/core.h
+++ b/drivers/usb/dwc2/core.h
@@ -139,6 +139,7 @@ struct s3c_hsotg_ep {
 	unsigned int            last_load;
 	unsigned int            fifo_load;
 	unsigned short          fifo_size;
+	unsigned short		fifo_index;
 
 	unsigned char           dir_in;
 	unsigned char           index;
@@ -194,8 +195,10 @@ struct s3c_hsotg {
 	struct regulator_bulk_data supplies[ARRAY_SIZE(s3c_hsotg_supply_names)];
 
 	u32                     phyif;
+	int			fifo_mem;
 	unsigned int            dedicated_fifos:1;
 	unsigned char           num_of_eps;
+	u32			fifo_map;
 
 	struct dentry           *debug_root;
 	struct dentry           *debug_file;
@@ -501,6 +504,10 @@ struct dwc2_hw_params {
  *                      a_peripheral and b_device=>b_host) this may not match
  *                      the core, but allows the software to determine
  *                      transitions
+ * @dr_mode:            Requested mode of operation, one of following:
+ *                      - USB_DR_MODE_PERIPHERAL
+ *                      - USB_DR_MODE_HOST
+ *                      - USB_DR_MODE_OTG
  * @queuing_high_bandwidth: True if multiple packets of a high-bandwidth
  *                      transfer are in process of being queued
  * @srp_success:        Stores status of SRP request in the case of a FS PHY
@@ -592,6 +599,7 @@ struct dwc2_hsotg {
 	/** Params to actually use */
 	struct dwc2_core_params *core_params;
 	enum usb_otg_state op_state;
+	enum usb_dr_mode dr_mode;
 
 	unsigned int queuing_high_bandwidth:1;
 	unsigned int srp_success:1;
diff --git a/drivers/usb/dwc2/gadget.c b/drivers/usb/dwc2/gadget.c
index ce6071d65d51..7b5856fadd93 100644
--- a/drivers/usb/dwc2/gadget.c
+++ b/drivers/usb/dwc2/gadget.c
@@ -182,16 +182,33 @@ static void s3c_hsotg_init_fifo(struct s3c_hsotg *hsotg)
 
 	/* start at the end of the GNPTXFSIZ, rounded up */
 	addr = 2048 + 1024;
-	size = 768;
 
 	/*
-	 * currently we allocate TX FIFOs for all possible endpoints,
-	 * and assume that they are all the same size.
+	 * Because we have not enough memory to have each TX FIFO of size at
+	 * least 3072 bytes (the maximum single packet size), we create four
+	 * FIFOs of lenght 1024, and four of length 3072 bytes, and assing
+	 * them to endpoints dynamically according to maxpacket size value of
+	 * given endpoint.
 	 */
 
-	for (ep = 1; ep <= 15; ep++) {
+	/* 256*4=1024 bytes FIFO length */
+	size = 256;
+	for (ep = 1; ep <= 4; ep++) {
 		val = addr;
 		val |= size << FIFOSIZE_DEPTH_SHIFT;
+		WARN_ONCE(addr + size > hsotg->fifo_mem,
+			  "insufficient fifo memory");
+		addr += size;
+
+		writel(val, hsotg->regs + DPTXFSIZN(ep));
+	}
+	/* 768*4=3072 bytes FIFO length */
+	size = 768;
+	for (ep = 5; ep <= 8; ep++) {
+		val = addr;
+		val |= size << FIFOSIZE_DEPTH_SHIFT;
+		WARN_ONCE(addr + size > hsotg->fifo_mem,
+			  "insufficient fifo memory");
 		addr += size;
 
 		writel(val, hsotg->regs + DPTXFSIZN(ep));
@@ -987,8 +1004,8 @@ static int s3c_hsotg_process_req_feature(struct s3c_hsotg *hsotg,
 					hs_req = ep->req;
 					ep->req = NULL;
 					list_del_init(&hs_req->queue);
-					hs_req->req.complete(&ep->ep,
-							     &hs_req->req);
+					usb_gadget_giveback_request(&ep->ep,
+								    &hs_req->req);
 				}
 
 				/* If we have pending request, then start it */
@@ -1245,7 +1262,7 @@ static void s3c_hsotg_complete_request(struct s3c_hsotg *hsotg,
 
 	if (hs_req->req.complete) {
 		spin_unlock(&hsotg->lock);
-		hs_req->req.complete(&hs_ep->ep, &hs_req->req);
+		usb_gadget_giveback_request(&hs_ep->ep, &hs_req->req);
 		spin_lock(&hsotg->lock);
 	}
 
@@ -1832,7 +1849,7 @@ static void s3c_hsotg_epint(struct s3c_hsotg *hsotg, unsigned int idx,
 		if (dir_in) {
 			int epctl = readl(hsotg->regs + epctl_reg);
 
-			s3c_hsotg_txfifo_flush(hsotg, idx);
+			s3c_hsotg_txfifo_flush(hsotg, hs_ep->fifo_index);
 
 			if ((epctl & DXEPCTL_STALL) &&
 				(epctl & DXEPCTL_EPTYPE_BULK)) {
@@ -1981,6 +1998,7 @@ static void kill_all_requests(struct s3c_hsotg *hsotg,
 			      int result, bool force)
 {
 	struct s3c_hsotg_req *req, *treq;
+	unsigned size;
 
 	list_for_each_entry_safe(req, treq, &ep->queue, queue) {
 		/*
@@ -1994,9 +2012,11 @@ static void kill_all_requests(struct s3c_hsotg *hsotg,
 		s3c_hsotg_complete_request(hsotg, ep, req,
 					   result);
 	}
-	if (hsotg->dedicated_fifos)
-		if ((readl(hsotg->regs + DTXFSTS(ep->index)) & 0xffff) * 4 < 3072)
-			s3c_hsotg_txfifo_flush(hsotg, ep->index);
+	if (!hsotg->dedicated_fifos)
+		return;
+	size = (readl(hsotg->regs + DTXFSTS(ep->index)) & 0xffff) * 4;
+	if (size < ep->fifo_size)
+		s3c_hsotg_txfifo_flush(hsotg, ep->fifo_index);
 }
 
 /**
@@ -2437,6 +2457,7 @@ static int s3c_hsotg_ep_enable(struct usb_ep *ep,
 	u32 epctrl;
 	u32 mps;
 	int dir_in;
+	int i, val, size;
 	int ret = 0;
 
 	dev_dbg(hsotg->dev,
@@ -2509,17 +2530,8 @@ static int s3c_hsotg_ep_enable(struct usb_ep *ep,
 		break;
 
 	case USB_ENDPOINT_XFER_INT:
-		if (dir_in) {
-			/*
-			 * Allocate our TxFNum by simply using the index
-			 * of the endpoint for the moment. We could do
-			 * something better if the host indicates how
-			 * many FIFOs we are expecting to use.
-			 */
-
+		if (dir_in)
 			hs_ep->periodic = 1;
-			epctrl |= DXEPCTL_TXFNUM(index);
-		}
 
 		epctrl |= DXEPCTL_EPTYPE_INTERRUPT;
 		break;
@@ -2533,8 +2545,25 @@ static int s3c_hsotg_ep_enable(struct usb_ep *ep,
 	 * if the hardware has dedicated fifos, we must give each IN EP
 	 * a unique tx-fifo even if it is non-periodic.
 	 */
-	if (dir_in && hsotg->dedicated_fifos)
-		epctrl |= DXEPCTL_TXFNUM(index);
+	if (dir_in && hsotg->dedicated_fifos) {
+		size = hs_ep->ep.maxpacket*hs_ep->mc;
+		for (i = 1; i <= 8; ++i) {
+			if (hsotg->fifo_map & (1<<i))
+				continue;
+			val = readl(hsotg->regs + DPTXFSIZN(i));
+			val = (val >> FIFOSIZE_DEPTH_SHIFT)*4;
+			if (val < size)
+				continue;
+			hsotg->fifo_map |= 1<<i;
+
+			epctrl |= DXEPCTL_TXFNUM(i);
+			hs_ep->fifo_index = i;
+			hs_ep->fifo_size = val;
+			break;
+		}
+		if (i == 8)
+			return -ENOMEM;
+	}
 
 	/* for non control endpoints, set PID to D0 */
 	if (index)
@@ -2568,7 +2597,7 @@ static int s3c_hsotg_ep_disable(struct usb_ep *ep)
 	u32 epctrl_reg;
 	u32 ctrl;
 
-	dev_info(hsotg->dev, "%s(ep %p)\n", __func__, ep);
+	dev_dbg(hsotg->dev, "%s(ep %p)\n", __func__, ep);
 
 	if (ep == &hsotg->eps[0].ep) {
 		dev_err(hsotg->dev, "%s: called for ep0\n", __func__);
@@ -2581,6 +2610,9 @@ static int s3c_hsotg_ep_disable(struct usb_ep *ep)
 	/* terminate all requests with shutdown */
 	kill_all_requests(hsotg, hs_ep, -ESHUTDOWN, false);
 
+	hsotg->fifo_map &= ~(1<<hs_ep->fifo_index);
+	hs_ep->fifo_index = 0;
+	hs_ep->fifo_size = 0;
 
 	ctrl = readl(hsotg->regs + epctrl_reg);
 	ctrl &= ~DXEPCTL_EPENA;
@@ -2626,7 +2658,7 @@ static int s3c_hsotg_ep_dequeue(struct usb_ep *ep, struct usb_request *req)
 	struct s3c_hsotg *hs = hs_ep->parent;
 	unsigned long flags;
 
-	dev_info(hs->dev, "ep_dequeue(%p,%p)\n", ep, req);
+	dev_dbg(hs->dev, "ep_dequeue(%p,%p)\n", ep, req);
 
 	spin_lock_irqsave(&hs->lock, flags);
 
@@ -2861,6 +2893,8 @@ static int s3c_hsotg_udc_start(struct usb_gadget *gadget,
 	hsotg->gadget.dev.of_node = hsotg->dev->of_node;
 	hsotg->gadget.speed = USB_SPEED_UNKNOWN;
 
+	clk_enable(hsotg->clk);
+
 	ret = regulator_bulk_enable(ARRAY_SIZE(hsotg->supplies),
 				    hsotg->supplies);
 	if (ret) {
@@ -2909,6 +2943,8 @@ static int s3c_hsotg_udc_stop(struct usb_gadget *gadget,
 
 	regulator_bulk_disable(ARRAY_SIZE(hsotg->supplies), hsotg->supplies);
 
+	clk_disable(hsotg->clk);
+
 	return 0;
 }
 
@@ -2935,13 +2971,15 @@ static int s3c_hsotg_pullup(struct usb_gadget *gadget, int is_on)
 	struct s3c_hsotg *hsotg = to_hsotg(gadget);
 	unsigned long flags = 0;
 
-	dev_dbg(hsotg->dev, "%s: is_in: %d\n", __func__, is_on);
+	dev_dbg(hsotg->dev, "%s: is_on: %d\n", __func__, is_on);
 
 	spin_lock_irqsave(&hsotg->lock, flags);
 	if (is_on) {
 		s3c_hsotg_phy_enable(hsotg);
+		clk_enable(hsotg->clk);
 		s3c_hsotg_core_init(hsotg);
 	} else {
+		clk_disable(hsotg->clk);
 		s3c_hsotg_phy_disable(hsotg);
 	}
 
@@ -2972,7 +3010,6 @@ static void s3c_hsotg_initep(struct s3c_hsotg *hsotg,
 				       struct s3c_hsotg_ep *hs_ep,
 				       int epnum)
 {
-	u32 ptxfifo;
 	char *dir;
 
 	if (epnum == 0)
@@ -3001,15 +3038,6 @@ static void s3c_hsotg_initep(struct s3c_hsotg *hsotg,
 	hs_ep->ep.ops = &s3c_hsotg_ep_ops;
 
 	/*
-	 * Read the FIFO size for the Periodic TX FIFO, even if we're
-	 * an OUT endpoint, we may as well do this if in future the
-	 * code is changed to make each endpoint's direction changeable.
-	 */
-
-	ptxfifo = readl(hsotg->regs + DPTXFSIZN(epnum));
-	hs_ep->fifo_size = FIFOSIZE_DEPTH_GET(ptxfifo) * 4;
-
-	/*
 	 * if we're using dma, we need to set the next-endpoint pointer
 	 * to be something valid.
 	 */
@@ -3029,19 +3057,22 @@ static void s3c_hsotg_initep(struct s3c_hsotg *hsotg,
  */
 static void s3c_hsotg_hw_cfg(struct s3c_hsotg *hsotg)
 {
-	u32 cfg2, cfg4;
+	u32 cfg2, cfg3, cfg4;
 	/* check hardware configuration */
 
 	cfg2 = readl(hsotg->regs + 0x48);
 	hsotg->num_of_eps = (cfg2 >> 10) & 0xF;
 
-	dev_info(hsotg->dev, "EPs:%d\n", hsotg->num_of_eps);
+	cfg3 = readl(hsotg->regs + 0x4C);
+	hsotg->fifo_mem = (cfg3 >> 16);
 
 	cfg4 = readl(hsotg->regs + 0x50);
 	hsotg->dedicated_fifos = (cfg4 >> 25) & 1;
 
-	dev_info(hsotg->dev, "%s fifos\n",
-		 hsotg->dedicated_fifos ? "dedicated" : "shared");
+	dev_info(hsotg->dev, "EPs: %d, %s fifos, %d entries in SPRAM\n",
+		 hsotg->num_of_eps,
+		 hsotg->dedicated_fifos ? "dedicated" : "shared",
+		 hsotg->fifo_mem);
 }
 
 /**
@@ -3392,6 +3423,9 @@ static int s3c_hsotg_probe(struct platform_device *pdev)
 	if (!hsotg)
 		return -ENOMEM;
 
+	/* Set default UTMI width */
+	hsotg->phyif = GUSBCFG_PHYIF16;
+
 	/*
 	 * Attempt to find a generic PHY, then look for an old style
 	 * USB PHY, finally fall back to pdata
@@ -3410,8 +3444,15 @@ static int s3c_hsotg_probe(struct platform_device *pdev)
 			hsotg->plat = plat;
 		} else
 			hsotg->uphy = uphy;
-	} else
+	} else {
 		hsotg->phy = phy;
+		/*
+		 * If using the generic PHY framework, check if the PHY bus
+		 * width is 8-bit and set the phyif appropriately.
+		 */
+		if (phy_get_bus_width(phy) == 8)
+			hsotg->phyif = GUSBCFG_PHYIF8;
+	}
 
 	hsotg->dev = dev;
 
@@ -3471,22 +3512,12 @@ static int s3c_hsotg_probe(struct platform_device *pdev)
 		goto err_supplies;
 	}
 
-	/* Set default UTMI width */
-	hsotg->phyif = GUSBCFG_PHYIF16;
-
-	/*
-	 * If using the generic PHY framework, check if the PHY bus
-	 * width is 8-bit and set the phyif appropriately.
-	 */
-	if (hsotg->phy && (phy_get_bus_width(phy) == 8))
-		hsotg->phyif = GUSBCFG_PHYIF8;
-
 	/* usb phy enable */
 	s3c_hsotg_phy_enable(hsotg);
 
 	s3c_hsotg_corereset(hsotg);
-	s3c_hsotg_init(hsotg);
 	s3c_hsotg_hw_cfg(hsotg);
+	s3c_hsotg_init(hsotg);
 
 	ret = devm_request_irq(&pdev->dev, hsotg->irq, s3c_hsotg_irq, 0,
 				dev_name(dev), hsotg);
@@ -3611,6 +3642,7 @@ static int s3c_hsotg_suspend(struct platform_device *pdev, pm_message_t state)
 
 		ret = regulator_bulk_disable(ARRAY_SIZE(hsotg->supplies),
 					     hsotg->supplies);
+		clk_disable(hsotg->clk);
 	}
 
 	return ret;
@@ -3625,6 +3657,8 @@ static int s3c_hsotg_resume(struct platform_device *pdev)
 	if (hsotg->driver) {
 		dev_info(hsotg->dev, "resuming usb gadget %s\n",
 			 hsotg->driver->driver.name);
+
+		clk_enable(hsotg->clk);
 		ret = regulator_bulk_enable(ARRAY_SIZE(hsotg->supplies),
 				      hsotg->supplies);
 	}
diff --git a/drivers/usb/dwc2/hcd.c b/drivers/usb/dwc2/hcd.c
index 4d918ed8d343..0a0e6f0ad15f 100644
--- a/drivers/usb/dwc2/hcd.c
+++ b/drivers/usb/dwc2/hcd.c
@@ -697,29 +697,45 @@ static void *dwc2_hc_init_xfer(struct dwc2_hsotg *hsotg,
 }
 
 static int dwc2_hc_setup_align_buf(struct dwc2_hsotg *hsotg, struct dwc2_qh *qh,
-				   struct dwc2_host_chan *chan, void *bufptr)
+				   struct dwc2_host_chan *chan,
+				   struct dwc2_hcd_urb *urb, void *bufptr)
 {
 	u32 buf_size;
-
-	if (chan->ep_type != USB_ENDPOINT_XFER_ISOC)
-		buf_size = hsotg->core_params->max_transfer_size;
-	else
-		buf_size = 4096;
+	struct urb *usb_urb;
+	struct usb_hcd *hcd;
 
 	if (!qh->dw_align_buf) {
+		if (chan->ep_type != USB_ENDPOINT_XFER_ISOC)
+			buf_size = hsotg->core_params->max_transfer_size;
+		else
+			/* 3072 = 3 max-size Isoc packets */
+			buf_size = 3072;
+
 		qh->dw_align_buf = dma_alloc_coherent(hsotg->dev, buf_size,
 						      &qh->dw_align_buf_dma,
 						      GFP_ATOMIC);
 		if (!qh->dw_align_buf)
 			return -ENOMEM;
+		qh->dw_align_buf_size = buf_size;
 	}
 
-	if (!chan->ep_is_in && chan->xfer_len) {
-		dma_sync_single_for_cpu(hsotg->dev, chan->xfer_dma, buf_size,
-					DMA_TO_DEVICE);
-		memcpy(qh->dw_align_buf, bufptr, chan->xfer_len);
-		dma_sync_single_for_device(hsotg->dev, chan->xfer_dma, buf_size,
-					   DMA_TO_DEVICE);
+	if (chan->xfer_len) {
+		dev_vdbg(hsotg->dev, "%s(): non-aligned buffer\n", __func__);
+		usb_urb = urb->priv;
+
+		if (usb_urb) {
+			if (usb_urb->transfer_flags &
+			    (URB_SETUP_MAP_SINGLE | URB_DMA_MAP_SG |
+			     URB_DMA_MAP_PAGE | URB_DMA_MAP_SINGLE)) {
+				hcd = dwc2_hsotg_to_hcd(hsotg);
+				usb_hcd_unmap_urb_for_dma(hcd, usb_urb);
+			}
+			if (!chan->ep_is_in)
+				memcpy(qh->dw_align_buf, bufptr,
+				       chan->xfer_len);
+		} else {
+			dev_warn(hsotg->dev, "no URB in dwc2_urb\n");
+		}
 	}
 
 	chan->align_buf = qh->dw_align_buf_dma;
@@ -828,7 +844,7 @@ static int dwc2_assign_and_init_hc(struct dwc2_hsotg *hsotg, struct dwc2_qh *qh)
 	/* Non DWORD-aligned buffer case */
 	if (bufptr) {
 		dev_vdbg(hsotg->dev, "Non-aligned buffer\n");
-		if (dwc2_hc_setup_align_buf(hsotg, qh, chan, bufptr)) {
+		if (dwc2_hc_setup_align_buf(hsotg, qh, chan, urb, bufptr)) {
 			dev_err(hsotg->dev,
 				"%s: Failed to allocate memory to handle non-dword aligned buffer\n",
 				__func__);
diff --git a/drivers/usb/dwc2/hcd.h b/drivers/usb/dwc2/hcd.h
index fdc6d489084a..a12bb1538666 100644
--- a/drivers/usb/dwc2/hcd.h
+++ b/drivers/usb/dwc2/hcd.h
@@ -243,7 +243,8 @@ enum dwc2_transaction_type {
  * @ntd:                Actual number of transfer descriptors in a list
  * @dw_align_buf:       Used instead of original buffer if its physical address
  *                      is not dword-aligned
- * @dw_align_buf_dma:   DMA address for align_buf
+ * @dw_align_buf_size:  Size of dw_align_buf
+ * @dw_align_buf_dma:   DMA address for dw_align_buf
  * @qtd_list:           List of QTDs for this QH
  * @channel:            Host channel currently processing transfers for this QH
  * @qh_list_entry:      Entry for QH in either the periodic or non-periodic
@@ -276,6 +277,7 @@ struct dwc2_qh {
 	u16 start_split_frame;
 	u16 ntd;
 	u8 *dw_align_buf;
+	int dw_align_buf_size;
 	dma_addr_t dw_align_buf_dma;
 	struct list_head qtd_list;
 	struct dwc2_host_chan *channel;
diff --git a/drivers/usb/dwc2/hcd_intr.c b/drivers/usb/dwc2/hcd_intr.c
index 47b9eb5389b4..551ba878b003 100644
--- a/drivers/usb/dwc2/hcd_intr.c
+++ b/drivers/usb/dwc2/hcd_intr.c
@@ -465,12 +465,8 @@ static int dwc2_update_urb_state(struct dwc2_hsotg *hsotg,
 	/* Non DWORD-aligned buffer case handling */
 	if (chan->align_buf && xfer_length && chan->ep_is_in) {
 		dev_vdbg(hsotg->dev, "%s(): non-aligned buffer\n", __func__);
-		dma_sync_single_for_cpu(hsotg->dev, urb->dma, urb->length,
-					DMA_FROM_DEVICE);
 		memcpy(urb->buf + urb->actual_length, chan->qh->dw_align_buf,
 		       xfer_length);
-		dma_sync_single_for_device(hsotg->dev, urb->dma, urb->length,
-					   DMA_FROM_DEVICE);
 	}
 
 	dev_vdbg(hsotg->dev, "urb->actual_length=%d xfer_length=%d\n",
@@ -560,14 +556,9 @@ static enum dwc2_halt_status dwc2_update_isoc_urb_state(
 		    chan->ep_is_in) {
 			dev_vdbg(hsotg->dev, "%s(): non-aligned buffer\n",
 				 __func__);
-			dma_sync_single_for_cpu(hsotg->dev, urb->dma,
-						urb->length, DMA_FROM_DEVICE);
 			memcpy(urb->buf + frame_desc->offset +
 			       qtd->isoc_split_offset, chan->qh->dw_align_buf,
 			       frame_desc->actual_length);
-			dma_sync_single_for_device(hsotg->dev, urb->dma,
-						   urb->length,
-						   DMA_FROM_DEVICE);
 		}
 		break;
 	case DWC2_HC_XFER_FRAME_OVERRUN:
@@ -594,14 +585,9 @@ static enum dwc2_halt_status dwc2_update_isoc_urb_state(
 		    chan->ep_is_in) {
 			dev_vdbg(hsotg->dev, "%s(): non-aligned buffer\n",
 				 __func__);
-			dma_sync_single_for_cpu(hsotg->dev, urb->dma,
-						urb->length, DMA_FROM_DEVICE);
 			memcpy(urb->buf + frame_desc->offset +
 			       qtd->isoc_split_offset, chan->qh->dw_align_buf,
 			       frame_desc->actual_length);
-			dma_sync_single_for_device(hsotg->dev, urb->dma,
-						   urb->length,
-						   DMA_FROM_DEVICE);
 		}
 
 		/* Skip whole frame */
@@ -937,12 +923,8 @@ static int dwc2_xfercomp_isoc_split_in(struct dwc2_hsotg *hsotg,
 
 	if (chan->align_buf) {
 		dev_vdbg(hsotg->dev, "%s(): non-aligned buffer\n", __func__);
-		dma_sync_single_for_cpu(hsotg->dev, qtd->urb->dma,
-					qtd->urb->length, DMA_FROM_DEVICE);
 		memcpy(qtd->urb->buf + frame_desc->offset +
 		       qtd->isoc_split_offset, chan->qh->dw_align_buf, len);
-		dma_sync_single_for_device(hsotg->dev, qtd->urb->dma,
-					   qtd->urb->length, DMA_FROM_DEVICE);
 	}
 
 	qtd->isoc_split_offset += len;
@@ -1170,12 +1152,8 @@ static void dwc2_update_urb_state_abn(struct dwc2_hsotg *hsotg,
 	/* Non DWORD-aligned buffer case handling */
 	if (chan->align_buf && xfer_length && chan->ep_is_in) {
 		dev_vdbg(hsotg->dev, "%s(): non-aligned buffer\n", __func__);
-		dma_sync_single_for_cpu(hsotg->dev, urb->dma, urb->length,
-					DMA_FROM_DEVICE);
 		memcpy(urb->buf + urb->actual_length, chan->qh->dw_align_buf,
 		       xfer_length);
-		dma_sync_single_for_device(hsotg->dev, urb->dma, urb->length,
-					   DMA_FROM_DEVICE);
 	}
 
 	urb->actual_length += xfer_length;
@@ -1890,12 +1868,20 @@ static void dwc2_hc_chhltd_intr_dma(struct dwc2_hsotg *hsotg,
 					"hcint 0x%08x, intsts 0x%08x\n",
 					chan->hcint,
 					readl(hsotg->regs + GINTSTS));
+				goto error;
 			}
 		}
 	} else {
 		dev_info(hsotg->dev,
 			 "NYET/NAK/ACK/other in non-error case, 0x%08x\n",
 			 chan->hcint);
+error:
+		/* Failthrough: use 3-strikes rule */
+		qtd->error_count++;
+		dwc2_update_urb_state_abn(hsotg, chan, chnum, qtd->urb,
+					  qtd, DWC2_HC_XFER_XACT_ERR);
+		dwc2_hcd_save_data_toggle(hsotg, chan, chnum, qtd);
+		dwc2_halt_channel(hsotg, chan, qtd, DWC2_HC_XFER_XACT_ERR);
 	}
 }
 
diff --git a/drivers/usb/dwc2/hcd_queue.c b/drivers/usb/dwc2/hcd_queue.c
index 9540f7e1e20e..bb97838bc6c0 100644
--- a/drivers/usb/dwc2/hcd_queue.c
+++ b/drivers/usb/dwc2/hcd_queue.c
@@ -229,19 +229,11 @@ static struct dwc2_qh *dwc2_hcd_qh_create(struct dwc2_hsotg *hsotg,
  */
 void dwc2_hcd_qh_free(struct dwc2_hsotg *hsotg, struct dwc2_qh *qh)
 {
-	u32 buf_size;
-
-	if (hsotg->core_params->dma_desc_enable > 0) {
+	if (hsotg->core_params->dma_desc_enable > 0)
 		dwc2_hcd_qh_free_ddma(hsotg, qh);
-	} else if (qh->dw_align_buf) {
-		if (qh->ep_type == USB_ENDPOINT_XFER_ISOC)
-			buf_size = 4096;
-		else
-			buf_size = hsotg->core_params->max_transfer_size;
-		dma_free_coherent(hsotg->dev, buf_size, qh->dw_align_buf,
-				  qh->dw_align_buf_dma);
-	}
-
+	else if (qh->dw_align_buf)
+		dma_free_coherent(hsotg->dev, qh->dw_align_buf_size,
+				  qh->dw_align_buf, qh->dw_align_buf_dma);
 	kfree(qh);
 }
 
diff --git a/drivers/usb/dwc2/platform.c b/drivers/usb/dwc2/platform.c
index a10e7a353576..121dbdafc06b 100644
--- a/drivers/usb/dwc2/platform.c
+++ b/drivers/usb/dwc2/platform.c
@@ -42,6 +42,8 @@
 #include <linux/of_device.h>
 #include <linux/platform_device.h>
 
+#include <linux/usb/of.h>
+
 #include "core.h"
 #include "hcd.h"
 
@@ -75,6 +77,34 @@ static const struct dwc2_core_params params_bcm2835 = {
 	.uframe_sched			= 0,
 };
 
+static const struct dwc2_core_params params_rk3066 = {
+	.otg_cap			= 2,	/* non-HNP/non-SRP */
+	.otg_ver			= -1,
+	.dma_enable			= -1,
+	.dma_desc_enable		= 0,
+	.speed				= -1,
+	.enable_dynamic_fifo		= 1,
+	.en_multiple_tx_fifo		= -1,
+	.host_rx_fifo_size		= 520,	/* 520 DWORDs */
+	.host_nperio_tx_fifo_size	= 128,	/* 128 DWORDs */
+	.host_perio_tx_fifo_size	= 256,	/* 256 DWORDs */
+	.max_transfer_size		= 65535,
+	.max_packet_count		= -1,
+	.host_channels			= -1,
+	.phy_type			= -1,
+	.phy_utmi_width			= -1,
+	.phy_ulpi_ddr			= -1,
+	.phy_ulpi_ext_vbus		= -1,
+	.i2c_enable			= -1,
+	.ulpi_fs_ls			= -1,
+	.host_support_fs_ls_low_power	= -1,
+	.host_ls_low_power_phy_clk	= -1,
+	.ts_dline			= -1,
+	.reload_ctl			= -1,
+	.ahbcfg				= 0x7, /* INCR16 */
+	.uframe_sched			= -1,
+};
+
 /**
  * dwc2_driver_remove() - Called when the DWC_otg core is unregistered with the
  * DWC_otg driver
@@ -97,6 +127,7 @@ static int dwc2_driver_remove(struct platform_device *dev)
 
 static const struct of_device_id dwc2_of_match_table[] = {
 	{ .compatible = "brcm,bcm2835-usb", .data = &params_bcm2835 },
+	{ .compatible = "rockchip,rk3066-usb", .data = &params_rk3066 },
 	{ .compatible = "snps,dwc2", .data = NULL },
 	{},
 };
@@ -171,6 +202,8 @@ static int dwc2_driver_probe(struct platform_device *dev)
 	dev_dbg(&dev->dev, "mapped PA %08lx to VA %p\n",
 		(unsigned long)res->start, hsotg->regs);
 
+	hsotg->dr_mode = of_usb_get_dr_mode(dev->dev.of_node);
+
 	retval = dwc2_hcd_init(hsotg, irq, params);
 	if (retval)
 		return retval;
diff --git a/drivers/usb/dwc3/Kconfig b/drivers/usb/dwc3/Kconfig
index 785510a0a0c3..f4e5cc60db0b 100644
--- a/drivers/usb/dwc3/Kconfig
+++ b/drivers/usb/dwc3/Kconfig
@@ -80,6 +80,23 @@ config USB_DWC3_KEYSTONE
 	  Support of USB2/3 functionality in TI Keystone2 platforms.
 	  Say 'Y' or 'M' here if you have one such device
 
+config USB_DWC3_ST
+	tristate "STMicroelectronics Platforms"
+	depends on ARCH_STI && OF
+	default USB_DWC3
+	help
+	  STMicroelectronics SoCs with one DesignWare Core USB3 IP
+	  inside (i.e. STiH407).
+	  Say 'Y' or 'M' if you have one such device.
+
+config USB_DWC3_QCOM
+	tristate "Qualcomm Platforms"
+	depends on ARCH_QCOM || COMPILE_TEST
+	default USB_DWC3
+	help
+	  Recent Qualcomm SoCs ship with one DesignWare Core USB3 IP inside,
+	  say 'Y' or 'M' if you have one such device.
+
 comment "Debugging features"
 
 config USB_DWC3_DEBUG
diff --git a/drivers/usb/dwc3/Makefile b/drivers/usb/dwc3/Makefile
index 10ac3e72482e..bb34fbcfeab3 100644
--- a/drivers/usb/dwc3/Makefile
+++ b/drivers/usb/dwc3/Makefile
@@ -1,9 +1,12 @@
+# define_trace.h needs to know how to find our header
+CFLAGS_trace.o				:= -I$(src)
+
 ccflags-$(CONFIG_USB_DWC3_DEBUG)	:= -DDEBUG
 ccflags-$(CONFIG_USB_DWC3_VERBOSE)	+= -DVERBOSE_DEBUG
 
 obj-$(CONFIG_USB_DWC3)			+= dwc3.o
 
-dwc3-y					:= core.o
+dwc3-y					:= core.o debug.o trace.o
 
 ifneq ($(filter y,$(CONFIG_USB_DWC3_HOST) $(CONFIG_USB_DWC3_DUAL_ROLE)),)
 	dwc3-y				+= host.o
@@ -33,3 +36,5 @@ obj-$(CONFIG_USB_DWC3_OMAP)		+= dwc3-omap.o
 obj-$(CONFIG_USB_DWC3_EXYNOS)		+= dwc3-exynos.o
 obj-$(CONFIG_USB_DWC3_PCI)		+= dwc3-pci.o
 obj-$(CONFIG_USB_DWC3_KEYSTONE)		+= dwc3-keystone.o
+obj-$(CONFIG_USB_DWC3_QCOM)		+= dwc3-qcom.o
+obj-$(CONFIG_USB_DWC3_ST)		+= dwc3-st.o
diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
index 9069984fe5cf..b0f4d52b7f04 100644
--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -186,10 +186,8 @@ static int dwc3_alloc_event_buffers(struct dwc3 *dwc, unsigned length)
 
 	dwc->ev_buffs = devm_kzalloc(dwc->dev, sizeof(*dwc->ev_buffs) * num,
 			GFP_KERNEL);
-	if (!dwc->ev_buffs) {
-		dev_err(dwc->dev, "can't allocate event buffers array\n");
+	if (!dwc->ev_buffs)
 		return -ENOMEM;
-	}
 
 	for (i = 0; i < num; i++) {
 		struct dwc3_event_buffer	*evt;
@@ -639,10 +637,9 @@ static int dwc3_probe(struct platform_device *pdev)
 	void			*mem;
 
 	mem = devm_kzalloc(dev, sizeof(*dwc) + DWC3_ALIGN_MASK, GFP_KERNEL);
-	if (!mem) {
-		dev_err(dev, "not enough memory\n");
+	if (!mem)
 		return -ENOMEM;
-	}
+
 	dwc = PTR_ALIGN(mem, DWC3_ALIGN_MASK + 1);
 	dwc->mem = mem;
 	dwc->dev = dev;
diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h
index 48fb264065db..66f62563bcf9 100644
--- a/drivers/usb/dwc3/core.h
+++ b/drivers/usb/dwc3/core.h
@@ -33,6 +33,8 @@
 
 #include <linux/phy/phy.h>
 
+#define DWC3_MSG_MAX	500
+
 /* Global constants */
 #define DWC3_EP0_BOUNCE_SIZE	512
 #define DWC3_ENDPOINTS_NUM	32
@@ -938,7 +940,7 @@ int dwc3_gadget_get_link_state(struct dwc3 *dwc);
 int dwc3_gadget_set_link_state(struct dwc3 *dwc, enum dwc3_link_state state);
 int dwc3_send_gadget_ep_cmd(struct dwc3 *dwc, unsigned ep,
 		unsigned cmd, struct dwc3_gadget_ep_cmd_params *params);
-int dwc3_send_gadget_generic_command(struct dwc3 *dwc, int cmd, u32 param);
+int dwc3_send_gadget_generic_command(struct dwc3 *dwc, unsigned cmd, u32 param);
 #else
 static inline int dwc3_gadget_init(struct dwc3 *dwc)
 { return 0; }
diff --git a/drivers/usb/dwc3/debug.c b/drivers/usb/dwc3/debug.c
new file mode 100644
index 000000000000..0be6885bc370
--- /dev/null
+++ b/drivers/usb/dwc3/debug.c
@@ -0,0 +1,32 @@
+/**
+ * debug.c - DesignWare USB3 DRD Controller Debug/Trace Support
+ *
+ * Copyright (C) 2014 Texas Instruments Incorporated - http://www.ti.com
+ *
+ * Author: Felipe Balbi <balbi@ti.com>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2  of
+ * the License as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include "debug.h"
+
+void dwc3_trace(void (*trace)(struct va_format *), const char *fmt, ...)
+{
+	struct va_format vaf;
+	va_list args;
+
+	va_start(args, fmt);
+	vaf.fmt = fmt;
+	vaf.va = &args;
+
+	trace(&vaf);
+
+	va_end(args);
+}
diff --git a/drivers/usb/dwc3/debug.h b/drivers/usb/dwc3/debug.h
index fceb39dc4bba..07fbc2d94fd4 100644
--- a/drivers/usb/dwc3/debug.h
+++ b/drivers/usb/dwc3/debug.h
@@ -16,8 +16,206 @@
  * GNU General Public License for more details.
  */
 
+#ifndef __DWC3_DEBUG_H
+#define __DWC3_DEBUG_H
+
 #include "core.h"
 
+/**
+ * dwc3_gadget_ep_cmd_string - returns endpoint command string
+ * @cmd: command code
+ */
+static inline const char *
+dwc3_gadget_ep_cmd_string(u8 cmd)
+{
+	switch (cmd) {
+	case DWC3_DEPCMD_DEPSTARTCFG:
+		return "Start New Configuration";
+	case DWC3_DEPCMD_ENDTRANSFER:
+		return "End Transfer";
+	case DWC3_DEPCMD_UPDATETRANSFER:
+		return "Update Transfer";
+	case DWC3_DEPCMD_STARTTRANSFER:
+		return "Start Transfer";
+	case DWC3_DEPCMD_CLEARSTALL:
+		return "Clear Stall";
+	case DWC3_DEPCMD_SETSTALL:
+		return "Set Stall";
+	case DWC3_DEPCMD_GETEPSTATE:
+		return "Get Endpoint State";
+	case DWC3_DEPCMD_SETTRANSFRESOURCE:
+		return "Set Endpoint Transfer Resource";
+	case DWC3_DEPCMD_SETEPCONFIG:
+		return "Set Endpoint Configuration";
+	default:
+		return "UNKNOWN command";
+	}
+}
+
+/**
+ * dwc3_gadget_generic_cmd_string - returns generic command string
+ * @cmd: command code
+ */
+static inline const char *
+dwc3_gadget_generic_cmd_string(u8 cmd)
+{
+	switch (cmd) {
+	case DWC3_DGCMD_SET_LMP:
+		return "Set LMP";
+	case DWC3_DGCMD_SET_PERIODIC_PAR:
+		return "Set Periodic Parameters";
+	case DWC3_DGCMD_XMIT_FUNCTION:
+		return "Transmit Function Wake Device Notification";
+	case DWC3_DGCMD_SET_SCRATCHPAD_ADDR_LO:
+		return "Set Scratchpad Buffer Array Address Lo";
+	case DWC3_DGCMD_SET_SCRATCHPAD_ADDR_HI:
+		return "Set Scratchpad Buffer Array Address Hi";
+	case DWC3_DGCMD_SELECTED_FIFO_FLUSH:
+		return "Selected FIFO Flush";
+	case DWC3_DGCMD_ALL_FIFO_FLUSH:
+		return "All FIFO Flush";
+	case DWC3_DGCMD_SET_ENDPOINT_NRDY:
+		return "Set Endpoint NRDY";
+	case DWC3_DGCMD_RUN_SOC_BUS_LOOPBACK:
+		return "Run SoC Bus Loopback Test";
+	default:
+		return "UNKNOWN";
+	}
+}
+
+/**
+ * dwc3_gadget_link_string - returns link name
+ * @link_state: link state code
+ */
+static inline const char *
+dwc3_gadget_link_string(enum dwc3_link_state link_state)
+{
+	switch (link_state) {
+	case DWC3_LINK_STATE_U0:
+		return "U0";
+	case DWC3_LINK_STATE_U1:
+		return "U1";
+	case DWC3_LINK_STATE_U2:
+		return "U2";
+	case DWC3_LINK_STATE_U3:
+		return "U3";
+	case DWC3_LINK_STATE_SS_DIS:
+		return "SS.Disabled";
+	case DWC3_LINK_STATE_RX_DET:
+		return "RX.Detect";
+	case DWC3_LINK_STATE_SS_INACT:
+		return "SS.Inactive";
+	case DWC3_LINK_STATE_POLL:
+		return "Polling";
+	case DWC3_LINK_STATE_RECOV:
+		return "Recovery";
+	case DWC3_LINK_STATE_HRESET:
+		return "Hot Reset";
+	case DWC3_LINK_STATE_CMPLY:
+		return "Compliance";
+	case DWC3_LINK_STATE_LPBK:
+		return "Loopback";
+	case DWC3_LINK_STATE_RESET:
+		return "Reset";
+	case DWC3_LINK_STATE_RESUME:
+		return "Resume";
+	default:
+		return "UNKNOWN link state\n";
+	}
+}
+
+/**
+ * dwc3_gadget_event_string - returns event name
+ * @event: the event code
+ */
+static inline const char *dwc3_gadget_event_string(u8 event)
+{
+	switch (event) {
+	case DWC3_DEVICE_EVENT_DISCONNECT:
+		return "Disconnect";
+	case DWC3_DEVICE_EVENT_RESET:
+		return "Reset";
+	case DWC3_DEVICE_EVENT_CONNECT_DONE:
+		return "Connection Done";
+	case DWC3_DEVICE_EVENT_LINK_STATUS_CHANGE:
+		return "Link Status Change";
+	case DWC3_DEVICE_EVENT_WAKEUP:
+		return "WakeUp";
+	case DWC3_DEVICE_EVENT_EOPF:
+		return "End-Of-Frame";
+	case DWC3_DEVICE_EVENT_SOF:
+		return "Start-Of-Frame";
+	case DWC3_DEVICE_EVENT_ERRATIC_ERROR:
+		return "Erratic Error";
+	case DWC3_DEVICE_EVENT_CMD_CMPL:
+		return "Command Complete";
+	case DWC3_DEVICE_EVENT_OVERFLOW:
+		return "Overflow";
+	}
+
+	return "UNKNOWN";
+}
+
+/**
+ * dwc3_ep_event_string - returns event name
+ * @event: then event code
+ */
+static inline const char *dwc3_ep_event_string(u8 event)
+{
+	switch (event) {
+	case DWC3_DEPEVT_XFERCOMPLETE:
+		return "Transfer Complete";
+	case DWC3_DEPEVT_XFERINPROGRESS:
+		return "Transfer In-Progress";
+	case DWC3_DEPEVT_XFERNOTREADY:
+		return "Transfer Not Ready";
+	case DWC3_DEPEVT_RXTXFIFOEVT:
+		return "FIFO";
+	case DWC3_DEPEVT_STREAMEVT:
+		return "Stream";
+	case DWC3_DEPEVT_EPCMDCMPLT:
+		return "Endpoint Command Complete";
+	}
+
+	return "UNKNOWN";
+}
+
+/**
+ * dwc3_gadget_event_type_string - return event name
+ * @event: the event code
+ */
+static inline const char *dwc3_gadget_event_type_string(u8 event)
+{
+	switch (event) {
+	case DWC3_DEVICE_EVENT_DISCONNECT:
+		return "Disconnect";
+	case DWC3_DEVICE_EVENT_RESET:
+		return "Reset";
+	case DWC3_DEVICE_EVENT_CONNECT_DONE:
+		return "Connect Done";
+	case DWC3_DEVICE_EVENT_LINK_STATUS_CHANGE:
+		return "Link Status Change";
+	case DWC3_DEVICE_EVENT_WAKEUP:
+		return "Wake-Up";
+	case DWC3_DEVICE_EVENT_HIBER_REQ:
+		return "Hibernation";
+	case DWC3_DEVICE_EVENT_EOPF:
+		return "End of Periodic Frame";
+	case DWC3_DEVICE_EVENT_SOF:
+		return "Start of Frame";
+	case DWC3_DEVICE_EVENT_ERRATIC_ERROR:
+		return "Erratic Error";
+	case DWC3_DEVICE_EVENT_CMD_CMPL:
+		return "Command Complete";
+	case DWC3_DEVICE_EVENT_OVERFLOW:
+		return "Overflow";
+	default:
+		return "UNKNOWN";
+	}
+}
+
+void dwc3_trace(void (*trace)(struct va_format *), const char *fmt, ...);
+
 #ifdef CONFIG_DEBUG_FS
 extern int dwc3_debugfs_init(struct dwc3 *);
 extern void dwc3_debugfs_exit(struct dwc3 *);
@@ -27,4 +225,4 @@ static inline int dwc3_debugfs_init(struct dwc3 *d)
 static inline void dwc3_debugfs_exit(struct dwc3 *d)
 {  }
 #endif
-
+#endif /* __DWC3_DEBUG_H */
diff --git a/drivers/usb/dwc3/dwc3-exynos.c b/drivers/usb/dwc3/dwc3-exynos.c
index f9fb8adb785b..3951a65fea04 100644
--- a/drivers/usb/dwc3/dwc3-exynos.c
+++ b/drivers/usb/dwc3/dwc3-exynos.c
@@ -113,10 +113,8 @@ static int dwc3_exynos_probe(struct platform_device *pdev)
 	int			ret;
 
 	exynos = devm_kzalloc(dev, sizeof(*exynos), GFP_KERNEL);
-	if (!exynos) {
-		dev_err(dev, "not enough memory\n");
+	if (!exynos)
 		return -ENOMEM;
-	}
 
 	/*
 	 * Right now device-tree probed devices don't get dma_mask set.
diff --git a/drivers/usb/dwc3/dwc3-keystone.c b/drivers/usb/dwc3/dwc3-keystone.c
index 1fad1618df6e..7ec8495f4523 100644
--- a/drivers/usb/dwc3/dwc3-keystone.c
+++ b/drivers/usb/dwc3/dwc3-keystone.c
@@ -189,7 +189,6 @@ static struct platform_driver kdwc3_driver = {
 	.remove		= kdwc3_remove,
 	.driver		= {
 		.name	= "keystone-dwc3",
-		.owner	        = THIS_MODULE,
 		.of_match_table	= kdwc3_of_match,
 	},
 };
diff --git a/drivers/usb/dwc3/dwc3-omap.c b/drivers/usb/dwc3/dwc3-omap.c
index fc0de3753648..2f537d588225 100644
--- a/drivers/usb/dwc3/dwc3-omap.c
+++ b/drivers/usb/dwc3/dwc3-omap.c
@@ -481,10 +481,8 @@ static int dwc3_omap_probe(struct platform_device *pdev)
 	}
 
 	omap = devm_kzalloc(dev, sizeof(*omap), GFP_KERNEL);
-	if (!omap) {
-		dev_err(dev, "not enough memory\n");
+	if (!omap)
 		return -ENOMEM;
-	}
 
 	platform_set_drvdata(pdev, omap);
 
diff --git a/drivers/usb/dwc3/dwc3-pci.c b/drivers/usb/dwc3/dwc3-pci.c
index a60bab7dfa0a..436fb08c40b8 100644
--- a/drivers/usb/dwc3/dwc3-pci.c
+++ b/drivers/usb/dwc3/dwc3-pci.c
@@ -103,10 +103,8 @@ static int dwc3_pci_probe(struct pci_dev *pci,
 	struct device		*dev = &pci->dev;
 
 	glue = devm_kzalloc(dev, sizeof(*glue), GFP_KERNEL);
-	if (!glue) {
-		dev_err(dev, "not enough memory\n");
+	if (!glue)
 		return -ENOMEM;
-	}
 
 	glue->dev = dev;
 
diff --git a/drivers/usb/dwc3/dwc3-qcom.c b/drivers/usb/dwc3/dwc3-qcom.c
new file mode 100644
index 000000000000..8c2e8eec80c2
--- /dev/null
+++ b/drivers/usb/dwc3/dwc3-qcom.c
@@ -0,0 +1,130 @@
+/* Copyright (c) 2013-2014, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+
+struct dwc3_qcom {
+	struct device		*dev;
+
+	struct clk		*core_clk;
+	struct clk		*iface_clk;
+	struct clk		*sleep_clk;
+};
+
+static int dwc3_qcom_probe(struct platform_device *pdev)
+{
+	struct device_node *node = pdev->dev.of_node;
+	struct dwc3_qcom *qdwc;
+	int ret;
+
+	qdwc = devm_kzalloc(&pdev->dev, sizeof(*qdwc), GFP_KERNEL);
+	if (!qdwc)
+		return -ENOMEM;
+
+	platform_set_drvdata(pdev, qdwc);
+
+	qdwc->dev = &pdev->dev;
+
+	qdwc->core_clk = devm_clk_get(qdwc->dev, "core");
+	if (IS_ERR(qdwc->core_clk)) {
+		dev_err(qdwc->dev, "failed to get core clock\n");
+		return PTR_ERR(qdwc->core_clk);
+	}
+
+	qdwc->iface_clk = devm_clk_get(qdwc->dev, "iface");
+	if (IS_ERR(qdwc->iface_clk)) {
+		dev_dbg(qdwc->dev, "failed to get optional iface clock\n");
+		qdwc->iface_clk = NULL;
+	}
+
+	qdwc->sleep_clk = devm_clk_get(qdwc->dev, "sleep");
+	if (IS_ERR(qdwc->sleep_clk)) {
+		dev_dbg(qdwc->dev, "failed to get optional sleep clock\n");
+		qdwc->sleep_clk = NULL;
+	}
+
+	ret = clk_prepare_enable(qdwc->core_clk);
+	if (ret) {
+		dev_err(qdwc->dev, "failed to enable core clock\n");
+		goto err_core;
+	}
+
+	ret = clk_prepare_enable(qdwc->iface_clk);
+	if (ret) {
+		dev_err(qdwc->dev, "failed to enable optional iface clock\n");
+		goto err_iface;
+	}
+
+	ret = clk_prepare_enable(qdwc->sleep_clk);
+	if (ret) {
+		dev_err(qdwc->dev, "failed to enable optional sleep clock\n");
+		goto err_sleep;
+	}
+
+	ret = of_platform_populate(node, NULL, NULL, qdwc->dev);
+	if (ret) {
+		dev_err(qdwc->dev, "failed to register core - %d\n", ret);
+		goto err_clks;
+	}
+
+	return 0;
+
+err_clks:
+	clk_disable_unprepare(qdwc->sleep_clk);
+err_sleep:
+	clk_disable_unprepare(qdwc->iface_clk);
+err_iface:
+	clk_disable_unprepare(qdwc->core_clk);
+err_core:
+	return ret;
+}
+
+static int dwc3_qcom_remove(struct platform_device *pdev)
+{
+	struct dwc3_qcom *qdwc = platform_get_drvdata(pdev);
+
+	of_platform_depopulate(&pdev->dev);
+
+	clk_disable_unprepare(qdwc->sleep_clk);
+	clk_disable_unprepare(qdwc->iface_clk);
+	clk_disable_unprepare(qdwc->core_clk);
+
+	return 0;
+}
+
+static const struct of_device_id of_dwc3_match[] = {
+	{ .compatible = "qcom,dwc3" },
+	{ /* Sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, of_dwc3_match);
+
+static struct platform_driver dwc3_qcom_driver = {
+	.probe		= dwc3_qcom_probe,
+	.remove		= dwc3_qcom_remove,
+	.driver		= {
+		.name	= "qcom-dwc3",
+		.of_match_table	= of_dwc3_match,
+	},
+};
+
+module_platform_driver(dwc3_qcom_driver);
+
+MODULE_ALIAS("platform:qcom-dwc3");
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("DesignWare USB3 QCOM Glue Layer");
+MODULE_AUTHOR("Ivan T. Ivanov <iivanov@mm-sol.com>");
diff --git a/drivers/usb/dwc3/dwc3-st.c b/drivers/usb/dwc3/dwc3-st.c
new file mode 100644
index 000000000000..c7602b5362ad
--- /dev/null
+++ b/drivers/usb/dwc3/dwc3-st.c
@@ -0,0 +1,367 @@
+/**
+ * dwc3-st.c Support for dwc3 platform devices on ST Microelectronics platforms
+ *
+ * This is a small driver for the dwc3 to provide the glue logic
+ * to configure the controller. Tested on STi platforms.
+ *
+ * Copyright (C) 2014 Stmicroelectronics
+ *
+ * Author: Giuseppe Cavallaro <peppe.cavallaro@st.com>
+ * Contributors: Aymen Bouattay <aymen.bouattay@st.com>
+ *               Peter Griffin <peter.griffin@linaro.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * Inspired by dwc3-omap.c and dwc3-exynos.c.
+ */
+
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/ioport.h>
+#include <linux/kernel.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/regmap.h>
+#include <linux/reset.h>
+#include <linux/usb/of.h>
+
+#include "core.h"
+#include "io.h"
+
+/* glue registers */
+#define CLKRST_CTRL		0x00
+#define AUX_CLK_EN		BIT(0)
+#define SW_PIPEW_RESET_N	BIT(4)
+#define EXT_CFG_RESET_N		BIT(8)
+/*
+ * 1'b0 : The host controller complies with the xHCI revision 0.96
+ * 1'b1 : The host controller complies with the xHCI revision 1.0
+ */
+#define XHCI_REVISION		BIT(12)
+
+#define USB2_VBUS_MNGMNT_SEL1	0x2C
+/*
+ * For all fields in USB2_VBUS_MNGMNT_SEL1
+ * 2’b00 : Override value from Reg 0x30 is selected
+ * 2’b01 : utmiotg_<signal_name> from usb3_top is selected
+ * 2’b10 : pipew_<signal_name> from PIPEW instance is selected
+ * 2’b11 : value is 1'b0
+ */
+#define USB2_VBUS_REG30		0x0
+#define USB2_VBUS_UTMIOTG	0x1
+#define USB2_VBUS_PIPEW		0x2
+#define USB2_VBUS_ZERO		0x3
+
+#define SEL_OVERRIDE_VBUSVALID(n)	(n << 0)
+#define SEL_OVERRIDE_POWERPRESENT(n)	(n << 4)
+#define SEL_OVERRIDE_BVALID(n)		(n << 8)
+
+/* Static DRD configuration */
+#define USB3_CONTROL_MASK		0xf77
+
+#define USB3_DEVICE_NOT_HOST		BIT(0)
+#define USB3_FORCE_VBUSVALID		BIT(1)
+#define USB3_DELAY_VBUSVALID		BIT(2)
+#define USB3_SEL_FORCE_OPMODE		BIT(4)
+#define USB3_FORCE_OPMODE(n)		(n << 5)
+#define USB3_SEL_FORCE_DPPULLDOWN2	BIT(8)
+#define USB3_FORCE_DPPULLDOWN2		BIT(9)
+#define USB3_SEL_FORCE_DMPULLDOWN2	BIT(10)
+#define USB3_FORCE_DMPULLDOWN2		BIT(11)
+
+/**
+ * struct st_dwc3 - dwc3-st driver private structure
+ * @dev:		device pointer
+ * @glue_base:		ioaddr for the glue registers
+ * @regmap:		regmap pointer for getting syscfg
+ * @syscfg_reg_off:	usb syscfg control offset
+ * @dr_mode:		drd static host/device config
+ * @rstc_pwrdn:		rest controller for powerdown signal
+ * @rstc_rst:		reset controller for softreset signal
+ */
+
+struct st_dwc3 {
+	struct device *dev;
+	void __iomem *glue_base;
+	struct regmap *regmap;
+	int syscfg_reg_off;
+	enum usb_dr_mode dr_mode;
+	struct reset_control *rstc_pwrdn;
+	struct reset_control *rstc_rst;
+};
+
+static inline u32 st_dwc3_readl(void __iomem *base, u32 offset)
+{
+	return readl_relaxed(base + offset);
+}
+
+static inline void st_dwc3_writel(void __iomem *base, u32 offset, u32 value)
+{
+	writel_relaxed(value, base + offset);
+}
+
+/**
+ * st_dwc3_drd_init: program the port
+ * @dwc3_data: driver private structure
+ * Description: this function is to program the port as either host or device
+ * according to the static configuration passed from devicetree.
+ * OTG and dual role are not yet supported!
+ */
+static int st_dwc3_drd_init(struct st_dwc3 *dwc3_data)
+{
+	u32 val;
+	int err;
+
+	err = regmap_read(dwc3_data->regmap, dwc3_data->syscfg_reg_off, &val);
+	if (err)
+		return err;
+
+	val &= USB3_CONTROL_MASK;
+
+	switch (dwc3_data->dr_mode) {
+	case USB_DR_MODE_PERIPHERAL:
+
+		val &= ~(USB3_FORCE_VBUSVALID | USB3_DELAY_VBUSVALID
+			| USB3_SEL_FORCE_OPMODE | USB3_FORCE_OPMODE(0x3)
+			| USB3_SEL_FORCE_DPPULLDOWN2 | USB3_FORCE_DPPULLDOWN2
+			| USB3_SEL_FORCE_DMPULLDOWN2 | USB3_FORCE_DMPULLDOWN2);
+
+		val |= USB3_DEVICE_NOT_HOST;
+
+		dev_dbg(dwc3_data->dev, "Configuring as Device\n");
+		break;
+
+	case USB_DR_MODE_HOST:
+
+		val &= ~(USB3_DEVICE_NOT_HOST | USB3_FORCE_VBUSVALID
+			| USB3_SEL_FORCE_OPMODE	| USB3_FORCE_OPMODE(0x3)
+			| USB3_SEL_FORCE_DPPULLDOWN2 | USB3_FORCE_DPPULLDOWN2
+			| USB3_SEL_FORCE_DMPULLDOWN2 | USB3_FORCE_DMPULLDOWN2);
+
+		/*
+		 * USB3_DELAY_VBUSVALID is ANDed with USB_C_VBUSVALID. Thus,
+		 * when set to ‘0‘, it can delay the arrival of VBUSVALID
+		 * information to VBUSVLDEXT2 input of the pico PHY.
+		 * We don't want to do that so we set the bit to '1'.
+		 */
+
+		val |= USB3_DELAY_VBUSVALID;
+
+		dev_dbg(dwc3_data->dev, "Configuring as Host\n");
+		break;
+
+	default:
+		dev_err(dwc3_data->dev, "Unsupported mode of operation %d\n",
+			dwc3_data->dr_mode);
+		return -EINVAL;
+	}
+
+	return regmap_write(dwc3_data->regmap, dwc3_data->syscfg_reg_off, val);
+}
+
+/**
+ * st_dwc3_init: init the controller via glue logic
+ * @dwc3_data: driver private structure
+ */
+static void st_dwc3_init(struct st_dwc3 *dwc3_data)
+{
+	u32 reg = st_dwc3_readl(dwc3_data->glue_base, CLKRST_CTRL);
+
+	reg |= AUX_CLK_EN | EXT_CFG_RESET_N | XHCI_REVISION;
+	reg &= ~SW_PIPEW_RESET_N;
+	st_dwc3_writel(dwc3_data->glue_base, CLKRST_CTRL, reg);
+
+	/* configure mux for vbus, powerpresent and bvalid signals */
+	reg = st_dwc3_readl(dwc3_data->glue_base, USB2_VBUS_MNGMNT_SEL1);
+
+	reg |= SEL_OVERRIDE_VBUSVALID(USB2_VBUS_UTMIOTG) |
+		SEL_OVERRIDE_POWERPRESENT(USB2_VBUS_UTMIOTG) |
+		SEL_OVERRIDE_BVALID(USB2_VBUS_UTMIOTG);
+
+	st_dwc3_writel(dwc3_data->glue_base, USB2_VBUS_MNGMNT_SEL1, reg);
+
+	reg = st_dwc3_readl(dwc3_data->glue_base, CLKRST_CTRL);
+	reg |= SW_PIPEW_RESET_N;
+	st_dwc3_writel(dwc3_data->glue_base, CLKRST_CTRL, reg);
+}
+
+static int st_dwc3_probe(struct platform_device *pdev)
+{
+	struct st_dwc3 *dwc3_data;
+	struct resource *res;
+	struct device *dev = &pdev->dev;
+	struct device_node *node = dev->of_node, *child;
+	struct regmap *regmap;
+	int ret;
+
+	dwc3_data = devm_kzalloc(dev, sizeof(*dwc3_data), GFP_KERNEL);
+	if (!dwc3_data)
+		return -ENOMEM;
+
+	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "reg-glue");
+	dwc3_data->glue_base = devm_ioremap_resource(dev, res);
+	if (IS_ERR(dwc3_data->glue_base))
+		return PTR_ERR(dwc3_data->glue_base);
+
+	regmap = syscon_regmap_lookup_by_phandle(node, "st,syscfg");
+	if (IS_ERR(regmap))
+		return PTR_ERR(regmap);
+
+	dma_set_coherent_mask(dev, dev->coherent_dma_mask);
+	dwc3_data->dev = dev;
+	dwc3_data->regmap = regmap;
+
+	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "syscfg-reg");
+	if (!res) {
+		ret = -ENXIO;
+		goto undo_platform_dev_alloc;
+	}
+
+	dwc3_data->syscfg_reg_off = res->start;
+
+	dev_vdbg(&pdev->dev, "glue-logic addr 0x%p, syscfg-reg offset 0x%x\n",
+		 dwc3_data->glue_base, dwc3_data->syscfg_reg_off);
+
+	dwc3_data->rstc_pwrdn = devm_reset_control_get(dev, "powerdown");
+	if (IS_ERR(dwc3_data->rstc_pwrdn)) {
+		dev_err(&pdev->dev, "could not get power controller\n");
+		ret = PTR_ERR(dwc3_data->rstc_pwrdn);
+		goto undo_platform_dev_alloc;
+	}
+
+	/* Manage PowerDown */
+	reset_control_deassert(dwc3_data->rstc_pwrdn);
+
+	dwc3_data->rstc_rst = devm_reset_control_get(dev, "softreset");
+	if (IS_ERR(dwc3_data->rstc_rst)) {
+		dev_err(&pdev->dev, "could not get reset controller\n");
+		ret = PTR_ERR(dwc3_data->rstc_pwrdn);
+		goto undo_powerdown;
+	}
+
+	/* Manage SoftReset */
+	reset_control_deassert(dwc3_data->rstc_rst);
+
+	child = of_get_child_by_name(node, "dwc3");
+	if (!child) {
+		dev_err(&pdev->dev, "failed to find dwc3 core node\n");
+		ret = -ENODEV;
+		goto undo_softreset;
+	}
+
+	dwc3_data->dr_mode = of_usb_get_dr_mode(child);
+
+	/* Allocate and initialize the core */
+	ret = of_platform_populate(node, NULL, NULL, dev);
+	if (ret) {
+		dev_err(dev, "failed to add dwc3 core\n");
+		goto undo_softreset;
+	}
+
+	/*
+	 * Configure the USB port as device or host according to the static
+	 * configuration passed from DT.
+	 * DRD is the only mode currently supported so this will be enhanced
+	 * as soon as OTG is available.
+	 */
+	ret = st_dwc3_drd_init(dwc3_data);
+	if (ret) {
+		dev_err(dev, "drd initialisation failed\n");
+		goto undo_softreset;
+	}
+
+	/* ST glue logic init */
+	st_dwc3_init(dwc3_data);
+
+	platform_set_drvdata(pdev, dwc3_data);
+	return 0;
+
+undo_softreset:
+	reset_control_assert(dwc3_data->rstc_rst);
+undo_powerdown:
+	reset_control_assert(dwc3_data->rstc_pwrdn);
+undo_platform_dev_alloc:
+	platform_device_put(pdev);
+	return ret;
+}
+
+static int st_dwc3_remove(struct platform_device *pdev)
+{
+	struct st_dwc3 *dwc3_data = platform_get_drvdata(pdev);
+
+	of_platform_depopulate(&pdev->dev);
+
+	reset_control_assert(dwc3_data->rstc_pwrdn);
+	reset_control_assert(dwc3_data->rstc_rst);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int st_dwc3_suspend(struct device *dev)
+{
+	struct st_dwc3 *dwc3_data = dev_get_drvdata(dev);
+
+	reset_control_assert(dwc3_data->rstc_pwrdn);
+	reset_control_assert(dwc3_data->rstc_rst);
+
+	pinctrl_pm_select_sleep_state(dev);
+
+	return 0;
+}
+
+static int st_dwc3_resume(struct device *dev)
+{
+	struct st_dwc3 *dwc3_data = dev_get_drvdata(dev);
+	int ret;
+
+	pinctrl_pm_select_default_state(dev);
+
+	reset_control_deassert(dwc3_data->rstc_pwrdn);
+	reset_control_deassert(dwc3_data->rstc_rst);
+
+	ret = st_dwc3_drd_init(dwc3_data);
+	if (ret) {
+		dev_err(dev, "drd initialisation failed\n");
+		return ret;
+	}
+
+	/* ST glue logic init */
+	st_dwc3_init(dwc3_data);
+
+	return 0;
+}
+#endif /* CONFIG_PM_SLEEP */
+
+static SIMPLE_DEV_PM_OPS(st_dwc3_dev_pm_ops, st_dwc3_suspend, st_dwc3_resume);
+
+static const struct of_device_id st_dwc3_match[] = {
+	{ .compatible = "st,stih407-dwc3" },
+	{ /* sentinel */ },
+};
+
+MODULE_DEVICE_TABLE(of, st_dwc3_match);
+
+static struct platform_driver st_dwc3_driver = {
+	.probe = st_dwc3_probe,
+	.remove = st_dwc3_remove,
+	.driver = {
+		.name = "usb-st-dwc3",
+		.of_match_table = st_dwc3_match,
+		.pm = &st_dwc3_dev_pm_ops,
+	},
+};
+
+module_platform_driver(st_dwc3_driver);
+
+MODULE_AUTHOR("Giuseppe Cavallaro <peppe.cavallaro@st.com>");
+MODULE_DESCRIPTION("DesignWare USB3 STi Glue Layer");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/usb/dwc3/ep0.c b/drivers/usb/dwc3/ep0.c
index 21a352079bc2..b35938777dde 100644
--- a/drivers/usb/dwc3/ep0.c
+++ b/drivers/usb/dwc3/ep0.c
@@ -31,6 +31,7 @@
 #include <linux/usb/composite.h>
 
 #include "core.h"
+#include "debug.h"
 #include "gadget.h"
 #include "io.h"
 
@@ -65,7 +66,7 @@ static int dwc3_ep0_start_trans(struct dwc3 *dwc, u8 epnum, dma_addr_t buf_dma,
 
 	dep = dwc->eps[epnum];
 	if (dep->flags & DWC3_EP_BUSY) {
-		dev_vdbg(dwc->dev, "%s: still busy\n", dep->name);
+		dwc3_trace(trace_dwc3_ep0, "%s still busy", dep->name);
 		return 0;
 	}
 
@@ -88,7 +89,8 @@ static int dwc3_ep0_start_trans(struct dwc3 *dwc, u8 epnum, dma_addr_t buf_dma,
 	ret = dwc3_send_gadget_ep_cmd(dwc, dep->number,
 			DWC3_DEPCMD_STARTTRANSFER, &params);
 	if (ret < 0) {
-		dev_dbg(dwc->dev, "failed to send STARTTRANSFER command\n");
+		dwc3_trace(trace_dwc3_ep0, "%s STARTTRANSFER failed",
+				dep->name);
 		return ret;
 	}
 
@@ -153,7 +155,8 @@ static int __dwc3_gadget_ep0_queue(struct dwc3_ep *dep,
 		if (dwc->ep0state == EP0_STATUS_PHASE)
 			__dwc3_ep0_do_control_status(dwc, dwc->eps[direction]);
 		else
-			dev_dbg(dwc->dev, "too early for delayed status\n");
+			dwc3_trace(trace_dwc3_ep0,
+					"too early for delayed status");
 
 		return 0;
 	}
@@ -217,7 +220,8 @@ int dwc3_gadget_ep0_queue(struct usb_ep *ep, struct usb_request *request,
 
 	spin_lock_irqsave(&dwc->lock, flags);
 	if (!dep->endpoint.desc) {
-		dev_dbg(dwc->dev, "trying to queue request %p to disabled %s\n",
+		dwc3_trace(trace_dwc3_ep0,
+				"trying to queue request %p to disabled %s",
 				request, dep->name);
 		ret = -ESHUTDOWN;
 		goto out;
@@ -229,7 +233,8 @@ int dwc3_gadget_ep0_queue(struct usb_ep *ep, struct usb_request *request,
 		goto out;
 	}
 
-	dev_vdbg(dwc->dev, "queueing request %p to %s length %d, state '%s'\n",
+	dwc3_trace(trace_dwc3_ep0,
+			"queueing request %p to %s length %d state '%s'",
 			request, dep->name, request->length,
 			dwc3_ep0_state_string(dwc->ep0state));
 
@@ -485,12 +490,13 @@ static int dwc3_ep0_set_address(struct dwc3 *dwc, struct usb_ctrlrequest *ctrl)
 
 	addr = le16_to_cpu(ctrl->wValue);
 	if (addr > 127) {
-		dev_dbg(dwc->dev, "invalid device address %d\n", addr);
+		dwc3_trace(trace_dwc3_ep0, "invalid device address %d", addr);
 		return -EINVAL;
 	}
 
 	if (state == USB_STATE_CONFIGURED) {
-		dev_dbg(dwc->dev, "trying to set address when configured\n");
+		dwc3_trace(trace_dwc3_ep0,
+				"trying to set address when configured");
 		return -EINVAL;
 	}
 
@@ -556,7 +562,7 @@ static int dwc3_ep0_set_config(struct dwc3 *dwc, struct usb_ctrlrequest *ctrl)
 			dwc3_writel(dwc->regs, DWC3_DCTL, reg);
 
 			dwc->resize_fifos = true;
-			dev_dbg(dwc->dev, "resize fifos flag SET\n");
+			dwc3_trace(trace_dwc3_ep0, "resize FIFOs flag SET");
 		}
 		break;
 
@@ -680,35 +686,35 @@ static int dwc3_ep0_std_request(struct dwc3 *dwc, struct usb_ctrlrequest *ctrl)
 
 	switch (ctrl->bRequest) {
 	case USB_REQ_GET_STATUS:
-		dev_vdbg(dwc->dev, "USB_REQ_GET_STATUS\n");
+		dwc3_trace(trace_dwc3_ep0, "USB_REQ_GET_STATUS\n");
 		ret = dwc3_ep0_handle_status(dwc, ctrl);
 		break;
 	case USB_REQ_CLEAR_FEATURE:
-		dev_vdbg(dwc->dev, "USB_REQ_CLEAR_FEATURE\n");
+		dwc3_trace(trace_dwc3_ep0, "USB_REQ_CLEAR_FEATURE\n");
 		ret = dwc3_ep0_handle_feature(dwc, ctrl, 0);
 		break;
 	case USB_REQ_SET_FEATURE:
-		dev_vdbg(dwc->dev, "USB_REQ_SET_FEATURE\n");
+		dwc3_trace(trace_dwc3_ep0, "USB_REQ_SET_FEATURE\n");
 		ret = dwc3_ep0_handle_feature(dwc, ctrl, 1);
 		break;
 	case USB_REQ_SET_ADDRESS:
-		dev_vdbg(dwc->dev, "USB_REQ_SET_ADDRESS\n");
+		dwc3_trace(trace_dwc3_ep0, "USB_REQ_SET_ADDRESS\n");
 		ret = dwc3_ep0_set_address(dwc, ctrl);
 		break;
 	case USB_REQ_SET_CONFIGURATION:
-		dev_vdbg(dwc->dev, "USB_REQ_SET_CONFIGURATION\n");
+		dwc3_trace(trace_dwc3_ep0, "USB_REQ_SET_CONFIGURATION\n");
 		ret = dwc3_ep0_set_config(dwc, ctrl);
 		break;
 	case USB_REQ_SET_SEL:
-		dev_vdbg(dwc->dev, "USB_REQ_SET_SEL\n");
+		dwc3_trace(trace_dwc3_ep0, "USB_REQ_SET_SEL\n");
 		ret = dwc3_ep0_set_sel(dwc, ctrl);
 		break;
 	case USB_REQ_SET_ISOCH_DELAY:
-		dev_vdbg(dwc->dev, "USB_REQ_SET_ISOCH_DELAY\n");
+		dwc3_trace(trace_dwc3_ep0, "USB_REQ_SET_ISOCH_DELAY\n");
 		ret = dwc3_ep0_set_isoch_delay(dwc, ctrl);
 		break;
 	default:
-		dev_vdbg(dwc->dev, "Forwarding to gadget driver\n");
+		dwc3_trace(trace_dwc3_ep0, "Forwarding to gadget driver\n");
 		ret = dwc3_ep0_delegate_req(dwc, ctrl);
 		break;
 	}
@@ -726,6 +732,8 @@ static void dwc3_ep0_inspect_setup(struct dwc3 *dwc,
 	if (!dwc->gadget_driver)
 		goto out;
 
+	trace_dwc3_ctrl_req(ctrl);
+
 	len = le16_to_cpu(ctrl->wLength);
 	if (!len) {
 		dwc->three_stage_setup = false;
@@ -774,7 +782,7 @@ static void dwc3_ep0_complete_data(struct dwc3 *dwc,
 
 	status = DWC3_TRB_SIZE_TRBSTS(trb->size);
 	if (status == DWC3_TRBSTS_SETUP_PENDING) {
-		dev_dbg(dwc->dev, "Setup Pending received\n");
+		dwc3_trace(trace_dwc3_ep0, "Setup Pending received");
 
 		if (r)
 			dwc3_gadget_giveback(ep0, r, -ECONNRESET);
@@ -834,7 +842,7 @@ static void dwc3_ep0_complete_status(struct dwc3 *dwc,
 
 		ret = dwc3_gadget_set_test_mode(dwc, dwc->test_mode_nr);
 		if (ret < 0) {
-			dev_dbg(dwc->dev, "Invalid Test #%d\n",
+			dwc3_trace(trace_dwc3_ep0, "Invalid Test #%d",
 					dwc->test_mode_nr);
 			dwc3_ep0_stall_and_restart(dwc);
 			return;
@@ -843,7 +851,7 @@ static void dwc3_ep0_complete_status(struct dwc3 *dwc,
 
 	status = DWC3_TRB_SIZE_TRBSTS(trb->size);
 	if (status == DWC3_TRBSTS_SETUP_PENDING)
-		dev_dbg(dwc->dev, "Setup Pending received\n");
+		dwc3_trace(trace_dwc3_ep0, "Setup Pending received\n");
 
 	dwc->ep0state = EP0_SETUP_PHASE;
 	dwc3_ep0_out_start(dwc);
@@ -860,17 +868,17 @@ static void dwc3_ep0_xfer_complete(struct dwc3 *dwc,
 
 	switch (dwc->ep0state) {
 	case EP0_SETUP_PHASE:
-		dev_vdbg(dwc->dev, "Inspecting Setup Bytes\n");
+		dwc3_trace(trace_dwc3_ep0, "Setup Phase");
 		dwc3_ep0_inspect_setup(dwc, event);
 		break;
 
 	case EP0_DATA_PHASE:
-		dev_vdbg(dwc->dev, "Data Phase\n");
+		dwc3_trace(trace_dwc3_ep0, "Data Phase");
 		dwc3_ep0_complete_data(dwc, event);
 		break;
 
 	case EP0_STATUS_PHASE:
-		dev_vdbg(dwc->dev, "Status Phase\n");
+		dwc3_trace(trace_dwc3_ep0, "Status Phase");
 		dwc3_ep0_complete_status(dwc, event);
 		break;
 	default:
@@ -946,7 +954,7 @@ static int dwc3_ep0_start_control_status(struct dwc3_ep *dep)
 static void __dwc3_ep0_do_control_status(struct dwc3 *dwc, struct dwc3_ep *dep)
 {
 	if (dwc->resize_fifos) {
-		dev_dbg(dwc->dev, "starting to resize fifos\n");
+		dwc3_trace(trace_dwc3_ep0, "Resizing FIFOs");
 		dwc3_gadget_resize_tx_fifos(dwc);
 		dwc->resize_fifos = 0;
 	}
@@ -987,7 +995,7 @@ static void dwc3_ep0_xfernotready(struct dwc3 *dwc,
 
 	switch (event->status) {
 	case DEPEVT_STATUS_CONTROL_DATA:
-		dev_vdbg(dwc->dev, "Control Data\n");
+		dwc3_trace(trace_dwc3_ep0, "Control Data");
 
 		/*
 		 * We already have a DATA transfer in the controller's cache,
@@ -1001,7 +1009,8 @@ static void dwc3_ep0_xfernotready(struct dwc3 *dwc,
 		if (dwc->ep0_expect_in != event->endpoint_number) {
 			struct dwc3_ep	*dep = dwc->eps[dwc->ep0_expect_in];
 
-			dev_vdbg(dwc->dev, "Wrong direction for Data phase\n");
+			dwc3_trace(trace_dwc3_ep0,
+					"Wrong direction for Data phase");
 			dwc3_ep0_end_control_data(dwc, dep);
 			dwc3_ep0_stall_and_restart(dwc);
 			return;
@@ -1013,13 +1022,13 @@ static void dwc3_ep0_xfernotready(struct dwc3 *dwc,
 		if (dwc->ep0_next_event != DWC3_EP0_NRDY_STATUS)
 			return;
 
-		dev_vdbg(dwc->dev, "Control Status\n");
+		dwc3_trace(trace_dwc3_ep0, "Control Status");
 
 		dwc->ep0state = EP0_STATUS_PHASE;
 
 		if (dwc->delayed_status) {
 			WARN_ON_ONCE(event->endpoint_number != 1);
-			dev_vdbg(dwc->dev, "Mass Storage delayed status\n");
+			dwc3_trace(trace_dwc3_ep0, "Delayed Status");
 			return;
 		}
 
@@ -1032,7 +1041,7 @@ void dwc3_ep0_interrupt(struct dwc3 *dwc,
 {
 	u8			epnum = event->endpoint_number;
 
-	dev_dbg(dwc->dev, "%s while ep%d%s in state '%s'\n",
+	dwc3_trace(trace_dwc3_ep0, "%s while ep%d%s in state '%s'",
 			dwc3_ep_event_string(event->endpoint_event),
 			epnum >> 1, (epnum & 1) ? "in" : "out",
 			dwc3_ep0_state_string(dwc->ep0state));
diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
index 490a6ca00733..3818b26bfc05 100644
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -30,6 +30,7 @@
 #include <linux/usb/ch9.h>
 #include <linux/usb/gadget.h>
 
+#include "debug.h"
 #include "core.h"
 #include "gadget.h"
 #include "io.h"
@@ -266,107 +267,19 @@ void dwc3_gadget_giveback(struct dwc3_ep *dep, struct dwc3_request *req,
 	dev_dbg(dwc->dev, "request %p from %s completed %d/%d ===> %d\n",
 			req, dep->name, req->request.actual,
 			req->request.length, status);
+	trace_dwc3_gadget_giveback(req);
 
 	spin_unlock(&dwc->lock);
-	req->request.complete(&dep->endpoint, &req->request);
+	usb_gadget_giveback_request(&dep->endpoint, &req->request);
 	spin_lock(&dwc->lock);
 }
 
-static const char *dwc3_gadget_ep_cmd_string(u8 cmd)
-{
-	switch (cmd) {
-	case DWC3_DEPCMD_DEPSTARTCFG:
-		return "Start New Configuration";
-	case DWC3_DEPCMD_ENDTRANSFER:
-		return "End Transfer";
-	case DWC3_DEPCMD_UPDATETRANSFER:
-		return "Update Transfer";
-	case DWC3_DEPCMD_STARTTRANSFER:
-		return "Start Transfer";
-	case DWC3_DEPCMD_CLEARSTALL:
-		return "Clear Stall";
-	case DWC3_DEPCMD_SETSTALL:
-		return "Set Stall";
-	case DWC3_DEPCMD_GETEPSTATE:
-		return "Get Endpoint State";
-	case DWC3_DEPCMD_SETTRANSFRESOURCE:
-		return "Set Endpoint Transfer Resource";
-	case DWC3_DEPCMD_SETEPCONFIG:
-		return "Set Endpoint Configuration";
-	default:
-		return "UNKNOWN command";
-	}
-}
-
-static const char *dwc3_gadget_generic_cmd_string(u8 cmd)
-{
-	switch (cmd) {
-	case DWC3_DGCMD_SET_LMP:
-		return "Set LMP";
-	case DWC3_DGCMD_SET_PERIODIC_PAR:
-		return "Set Periodic Parameters";
-	case DWC3_DGCMD_XMIT_FUNCTION:
-		return "Transmit Function Wake Device Notification";
-	case DWC3_DGCMD_SET_SCRATCHPAD_ADDR_LO:
-		return "Set Scratchpad Buffer Array Address Lo";
-	case DWC3_DGCMD_SET_SCRATCHPAD_ADDR_HI:
-		return "Set Scratchpad Buffer Array Address Hi";
-	case DWC3_DGCMD_SELECTED_FIFO_FLUSH:
-		return "Selected FIFO Flush";
-	case DWC3_DGCMD_ALL_FIFO_FLUSH:
-		return "All FIFO Flush";
-	case DWC3_DGCMD_SET_ENDPOINT_NRDY:
-		return "Set Endpoint NRDY";
-	case DWC3_DGCMD_RUN_SOC_BUS_LOOPBACK:
-		return "Run SoC Bus Loopback Test";
-	default:
-		return "UNKNOWN";
-	}
-}
-
-static const char *dwc3_gadget_link_string(enum dwc3_link_state link_state)
-{
-	switch (link_state) {
-	case DWC3_LINK_STATE_U0:
-		return "U0";
-	case DWC3_LINK_STATE_U1:
-		return "U1";
-	case DWC3_LINK_STATE_U2:
-		return "U2";
-	case DWC3_LINK_STATE_U3:
-		return "U3";
-	case DWC3_LINK_STATE_SS_DIS:
-		return "SS.Disabled";
-	case DWC3_LINK_STATE_RX_DET:
-		return "RX.Detect";
-	case DWC3_LINK_STATE_SS_INACT:
-		return "SS.Inactive";
-	case DWC3_LINK_STATE_POLL:
-		return "Polling";
-	case DWC3_LINK_STATE_RECOV:
-		return "Recovery";
-	case DWC3_LINK_STATE_HRESET:
-		return "Hot Reset";
-	case DWC3_LINK_STATE_CMPLY:
-		return "Compliance";
-	case DWC3_LINK_STATE_LPBK:
-		return "Loopback";
-	case DWC3_LINK_STATE_RESET:
-		return "Reset";
-	case DWC3_LINK_STATE_RESUME:
-		return "Resume";
-	default:
-		return "UNKNOWN link state\n";
-	}
-}
-
-int dwc3_send_gadget_generic_command(struct dwc3 *dwc, int cmd, u32 param)
+int dwc3_send_gadget_generic_command(struct dwc3 *dwc, unsigned cmd, u32 param)
 {
 	u32		timeout = 500;
 	u32		reg;
 
-	dev_vdbg(dwc->dev, "generic cmd '%s' [%d] param %08x\n",
-			dwc3_gadget_generic_cmd_string(cmd), cmd, param);
+	trace_dwc3_gadget_generic_cmd(cmd, param);
 
 	dwc3_writel(dwc->regs, DWC3_DGCMDPAR, param);
 	dwc3_writel(dwc->regs, DWC3_DGCMD, cmd | DWC3_DGCMD_CMDACT);
@@ -397,10 +310,7 @@ int dwc3_send_gadget_ep_cmd(struct dwc3 *dwc, unsigned ep,
 	u32			timeout = 500;
 	u32			reg;
 
-	dev_vdbg(dwc->dev, "%s: cmd '%s' [%d] params %08x %08x %08x\n",
-			dep->name,
-			dwc3_gadget_ep_cmd_string(cmd), cmd, params->param0,
-			params->param1, params->param2);
+	trace_dwc3_gadget_ep_cmd(dep, cmd, params);
 
 	dwc3_writel(dwc->regs, DWC3_DEPCMDPAR0(ep), params->param0);
 	dwc3_writel(dwc->regs, DWC3_DEPCMDPAR1(ep), params->param1);
@@ -789,17 +699,16 @@ static struct usb_request *dwc3_gadget_ep_alloc_request(struct usb_ep *ep,
 {
 	struct dwc3_request		*req;
 	struct dwc3_ep			*dep = to_dwc3_ep(ep);
-	struct dwc3			*dwc = dep->dwc;
 
 	req = kzalloc(sizeof(*req), gfp_flags);
-	if (!req) {
-		dev_err(dwc->dev, "not enough memory\n");
+	if (!req)
 		return NULL;
-	}
 
 	req->epnum	= dep->number;
 	req->dep	= dep;
 
+	trace_dwc3_alloc_request(req);
+
 	return &req->request;
 }
 
@@ -808,6 +717,7 @@ static void dwc3_gadget_ep_free_request(struct usb_ep *ep,
 {
 	struct dwc3_request		*req = to_dwc3_request(request);
 
+	trace_dwc3_free_request(req);
 	kfree(req);
 }
 
@@ -889,6 +799,8 @@ static void dwc3_prepare_one_trb(struct dwc3_ep *dep,
 		trb->ctrl |= DWC3_TRB_CTRL_SID_SOFN(req->request.stream_id);
 
 	trb->ctrl |= DWC3_TRB_CTRL_HWO;
+
+	trace_dwc3_prepare_trb(dep, trb);
 }
 
 /*
@@ -1235,6 +1147,7 @@ static int dwc3_gadget_ep_queue(struct usb_ep *ep, struct usb_request *request,
 
 	dev_vdbg(dwc->dev, "queing request %p to %s length %d\n",
 			request, ep->name, request->length);
+	trace_dwc3_ep_queue(req);
 
 	ret = __dwc3_gadget_ep_queue(dep, req);
 	spin_unlock_irqrestore(&dwc->lock, flags);
@@ -1254,6 +1167,8 @@ static int dwc3_gadget_ep_dequeue(struct usb_ep *ep,
 	unsigned long			flags;
 	int				ret = 0;
 
+	trace_dwc3_ep_dequeue(req);
+
 	spin_lock_irqsave(&dwc->lock, flags);
 
 	list_for_each_entry(r, &dep->request_list, list) {
@@ -1744,11 +1659,8 @@ static int dwc3_gadget_init_hw_endpoints(struct dwc3 *dwc,
 		u8 epnum = (i << 1) | (!!direction);
 
 		dep = kzalloc(sizeof(*dep), GFP_KERNEL);
-		if (!dep) {
-			dev_err(dwc->dev, "can't allocate endpoint %d\n",
-					epnum);
+		if (!dep)
 			return -ENOMEM;
-		}
 
 		dep->dwc = dwc;
 		dep->number = epnum;
@@ -1847,6 +1759,8 @@ static int __dwc3_cleanup_done_trbs(struct dwc3 *dwc, struct dwc3_ep *dep,
 	unsigned int		s_pkt = 0;
 	unsigned int		trb_status;
 
+	trace_dwc3_complete_trb(dep, trb);
+
 	if ((trb->ctrl & DWC3_TRB_CTRL_HWO) && status != -ESHUTDOWN)
 		/*
 		 * We continue despite the error. There is not much we
@@ -2021,9 +1935,6 @@ static void dwc3_endpoint_interrupt(struct dwc3 *dwc,
 	if (!(dep->flags & DWC3_EP_ENABLED))
 		return;
 
-	dev_vdbg(dwc->dev, "%s: %s\n", dep->name,
-			dwc3_ep_event_string(event->endpoint_event));
-
 	if (epnum == 0 || epnum == 1) {
 		dwc3_ep0_interrupt(dwc, event);
 		return;
@@ -2210,8 +2121,6 @@ static void dwc3_gadget_disconnect_interrupt(struct dwc3 *dwc)
 {
 	int			reg;
 
-	dev_vdbg(dwc->dev, "%s\n", __func__);
-
 	reg = dwc3_readl(dwc->regs, DWC3_DCTL);
 	reg &= ~DWC3_DCTL_INITU1ENA;
 	dwc3_writel(dwc->regs, DWC3_DCTL, reg);
@@ -2230,8 +2139,6 @@ static void dwc3_gadget_reset_interrupt(struct dwc3 *dwc)
 {
 	u32			reg;
 
-	dev_vdbg(dwc->dev, "%s\n", __func__);
-
 	/*
 	 * WORKAROUND: DWC3 revisions <1.88a have an issue which
 	 * would cause a missing Disconnect Event if there's a
@@ -2316,8 +2223,6 @@ static void dwc3_gadget_conndone_interrupt(struct dwc3 *dwc)
 	u32			reg;
 	u8			speed;
 
-	dev_vdbg(dwc->dev, "%s\n", __func__);
-
 	reg = dwc3_readl(dwc->regs, DWC3_DSTS);
 	speed = reg & DWC3_DSTS_CONNECTSPD;
 	dwc->speed = speed;
@@ -2415,8 +2320,6 @@ static void dwc3_gadget_conndone_interrupt(struct dwc3 *dwc)
 
 static void dwc3_gadget_wakeup_interrupt(struct dwc3 *dwc)
 {
-	dev_vdbg(dwc->dev, "%s\n", __func__);
-
 	/*
 	 * TODO take core out of low power mode when that's
 	 * implemented.
@@ -2521,10 +2424,6 @@ static void dwc3_gadget_linksts_change_interrupt(struct dwc3 *dwc,
 		break;
 	}
 
-	dev_vdbg(dwc->dev, "link change: %s [%d] -> %s [%d]\n",
-			dwc3_gadget_link_string(dwc->link_state),
-			dwc->link_state, dwc3_gadget_link_string(next), next);
-
 	dwc->link_state = next;
 }
 
@@ -2601,6 +2500,8 @@ static void dwc3_gadget_interrupt(struct dwc3 *dwc,
 static void dwc3_process_event_entry(struct dwc3 *dwc,
 		const union dwc3_event *event)
 {
+	trace_dwc3_event(event->raw);
+
 	/* Endpoint IRQ, handle it and return early */
 	if (event->type.is_devspec == 0) {
 		/* depevt */
@@ -2754,7 +2655,6 @@ int dwc3_gadget_init(struct dwc3 *dwc)
 
 	dwc->setup_buf = kzalloc(DWC3_EP0_BOUNCE_SIZE, GFP_KERNEL);
 	if (!dwc->setup_buf) {
-		dev_err(dwc->dev, "failed to allocate setup buffer\n");
 		ret = -ENOMEM;
 		goto err2;
 	}
diff --git a/drivers/usb/dwc3/gadget.h b/drivers/usb/dwc3/gadget.h
index a0ee75b68a80..178ad8982206 100644
--- a/drivers/usb/dwc3/gadget.h
+++ b/drivers/usb/dwc3/gadget.h
@@ -103,60 +103,4 @@ static inline u32 dwc3_gadget_ep_get_transfer_index(struct dwc3 *dwc, u8 number)
 	return DWC3_DEPCMD_GET_RSC_IDX(res_id);
 }
 
-/**
- * dwc3_gadget_event_string - returns event name
- * @event: the event code
- */
-static inline const char *dwc3_gadget_event_string(u8 event)
-{
-	switch (event) {
-	case DWC3_DEVICE_EVENT_DISCONNECT:
-		return "Disconnect";
-	case DWC3_DEVICE_EVENT_RESET:
-		return "Reset";
-	case DWC3_DEVICE_EVENT_CONNECT_DONE:
-		return "Connection Done";
-	case DWC3_DEVICE_EVENT_LINK_STATUS_CHANGE:
-		return "Link Status Change";
-	case DWC3_DEVICE_EVENT_WAKEUP:
-		return "WakeUp";
-	case DWC3_DEVICE_EVENT_EOPF:
-		return "End-Of-Frame";
-	case DWC3_DEVICE_EVENT_SOF:
-		return "Start-Of-Frame";
-	case DWC3_DEVICE_EVENT_ERRATIC_ERROR:
-		return "Erratic Error";
-	case DWC3_DEVICE_EVENT_CMD_CMPL:
-		return "Command Complete";
-	case DWC3_DEVICE_EVENT_OVERFLOW:
-		return "Overflow";
-	}
-
-	return "UNKNOWN";
-}
-
-/**
- * dwc3_ep_event_string - returns event name
- * @event: then event code
- */
-static inline const char *dwc3_ep_event_string(u8 event)
-{
-	switch (event) {
-	case DWC3_DEPEVT_XFERCOMPLETE:
-		return "Transfer Complete";
-	case DWC3_DEPEVT_XFERINPROGRESS:
-		return "Transfer In-Progress";
-	case DWC3_DEPEVT_XFERNOTREADY:
-		return "Transfer Not Ready";
-	case DWC3_DEPEVT_RXTXFIFOEVT:
-		return "FIFO";
-	case DWC3_DEPEVT_STREAMEVT:
-		return "Stream";
-	case DWC3_DEPEVT_EPCMDCMPLT:
-		return "Endpoint Command Complete";
-	}
-
-	return "UNKNOWN";
-}
-
 #endif /* __DRIVERS_USB_DWC3_GADGET_H */
diff --git a/drivers/usb/dwc3/io.h b/drivers/usb/dwc3/io.h
index d94441c14d8c..6a79c8e66bbc 100644
--- a/drivers/usb/dwc3/io.h
+++ b/drivers/usb/dwc3/io.h
@@ -20,27 +20,51 @@
 #define __DRIVERS_USB_DWC3_IO_H
 
 #include <linux/io.h>
-
+#include "trace.h"
+#include "debug.h"
 #include "core.h"
 
 static inline u32 dwc3_readl(void __iomem *base, u32 offset)
 {
+	u32 offs = offset - DWC3_GLOBALS_REGS_START;
+	u32 value;
+
 	/*
 	 * We requested the mem region starting from the Globals address
 	 * space, see dwc3_probe in core.c.
 	 * However, the offsets are given starting from xHCI address space.
 	 */
-	return readl(base + (offset - DWC3_GLOBALS_REGS_START));
+	value = readl(base + offs);
+
+	/*
+	 * When tracing we want to make it easy to find the correct address on
+	 * documentation, so we revert it back to the proper addresses, the
+	 * same way they are described on SNPS documentation
+	 */
+	dwc3_trace(trace_dwc3_readl, "addr %p value %08x",
+			base - DWC3_GLOBALS_REGS_START + offset, value);
+
+	return value;
 }
 
 static inline void dwc3_writel(void __iomem *base, u32 offset, u32 value)
 {
+	u32 offs = offset - DWC3_GLOBALS_REGS_START;
+
 	/*
 	 * We requested the mem region starting from the Globals address
 	 * space, see dwc3_probe in core.c.
 	 * However, the offsets are given starting from xHCI address space.
 	 */
-	writel(value, base + (offset - DWC3_GLOBALS_REGS_START));
+	writel(value, base + offs);
+
+	/*
+	 * When tracing we want to make it easy to find the correct address on
+	 * documentation, so we revert it back to the proper addresses, the
+	 * same way they are described on SNPS documentation
+	 */
+	dwc3_trace(trace_dwc3_writel, "addr %p value %08x",
+			base - DWC3_GLOBALS_REGS_START + offset, value);
 }
 
 #endif /* __DRIVERS_USB_DWC3_IO_H */
diff --git a/drivers/usb/dwc3/trace.c b/drivers/usb/dwc3/trace.c
new file mode 100644
index 000000000000..6cd166412ad0
--- /dev/null
+++ b/drivers/usb/dwc3/trace.c
@@ -0,0 +1,19 @@
+/**
+ * trace.c - DesignWare USB3 DRD Controller Trace Support
+ *
+ * Copyright (C) 2014 Texas Instruments Incorporated - http://www.ti.com
+ *
+ * Author: Felipe Balbi <balbi@ti.com>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2  of
+ * the License as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#define CREATE_TRACE_POINTS
+#include "trace.h"
diff --git a/drivers/usb/dwc3/trace.h b/drivers/usb/dwc3/trace.h
new file mode 100644
index 000000000000..78aff1da089a
--- /dev/null
+++ b/drivers/usb/dwc3/trace.h
@@ -0,0 +1,220 @@
+/**
+ * trace.h - DesignWare USB3 DRD Controller Trace Support
+ *
+ * Copyright (C) 2014 Texas Instruments Incorporated - http://www.ti.com
+ *
+ * Author: Felipe Balbi <balbi@ti.com>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2  of
+ * the License as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#undef TRACE_SYSTEM
+#define TRACE_SYSTEM dwc3
+
+#if !defined(__DWC3_TRACE_H) || defined(TRACE_HEADER_MULTI_READ)
+#define __DWC3_TRACE_H
+
+#include <linux/types.h>
+#include <linux/tracepoint.h>
+#include <asm/byteorder.h>
+#include "core.h"
+#include "debug.h"
+
+DECLARE_EVENT_CLASS(dwc3_log_msg,
+	TP_PROTO(struct va_format *vaf),
+	TP_ARGS(vaf),
+	TP_STRUCT__entry(__dynamic_array(char, msg, DWC3_MSG_MAX)),
+	TP_fast_assign(
+		vsnprintf(__get_str(msg), DWC3_MSG_MAX, vaf->fmt, *vaf->va);
+	),
+	TP_printk("%s", __get_str(msg))
+);
+
+DEFINE_EVENT(dwc3_log_msg, dwc3_readl,
+	TP_PROTO(struct va_format *vaf),
+	TP_ARGS(vaf)
+);
+
+DEFINE_EVENT(dwc3_log_msg, dwc3_writel,
+	TP_PROTO(struct va_format *vaf),
+	TP_ARGS(vaf)
+);
+
+DEFINE_EVENT(dwc3_log_msg, dwc3_ep0,
+	TP_PROTO(struct va_format *vaf),
+	TP_ARGS(vaf)
+);
+
+DECLARE_EVENT_CLASS(dwc3_log_event,
+	TP_PROTO(u32 event),
+	TP_ARGS(event),
+	TP_STRUCT__entry(
+		__field(u32, event)
+	),
+	TP_fast_assign(
+		__entry->event = event;
+	),
+	TP_printk("event %08x\n", __entry->event)
+);
+
+DEFINE_EVENT(dwc3_log_event, dwc3_event,
+	TP_PROTO(u32 event),
+	TP_ARGS(event)
+);
+
+DECLARE_EVENT_CLASS(dwc3_log_ctrl,
+	TP_PROTO(struct usb_ctrlrequest *ctrl),
+	TP_ARGS(ctrl),
+	TP_STRUCT__entry(
+		__field(struct usb_ctrlrequest *, ctrl)
+	),
+	TP_fast_assign(
+		__entry->ctrl = ctrl;
+	),
+	TP_printk("bRequestType %02x bRequest %02x wValue %04x wIndex %04x wLength %d",
+		__entry->ctrl->bRequestType, __entry->ctrl->bRequest,
+		le16_to_cpu(__entry->ctrl->wValue), le16_to_cpu(__entry->ctrl->wIndex),
+		le16_to_cpu(__entry->ctrl->wLength)
+	)
+);
+
+DEFINE_EVENT(dwc3_log_ctrl, dwc3_ctrl_req,
+	TP_PROTO(struct usb_ctrlrequest *ctrl),
+	TP_ARGS(ctrl)
+);
+
+DECLARE_EVENT_CLASS(dwc3_log_request,
+	TP_PROTO(struct dwc3_request *req),
+	TP_ARGS(req),
+	TP_STRUCT__entry(
+		__field(struct dwc3_request *, req)
+	),
+	TP_fast_assign(
+		__entry->req = req;
+	),
+	TP_printk("%s: req %p length %u/%u ==> %d",
+		__entry->req->dep->name, __entry->req,
+		__entry->req->request.actual, __entry->req->request.length,
+		__entry->req->request.status
+	)
+);
+
+DEFINE_EVENT(dwc3_log_request, dwc3_alloc_request,
+	TP_PROTO(struct dwc3_request *req),
+	TP_ARGS(req)
+);
+
+DEFINE_EVENT(dwc3_log_request, dwc3_free_request,
+	TP_PROTO(struct dwc3_request *req),
+	TP_ARGS(req)
+);
+
+DEFINE_EVENT(dwc3_log_request, dwc3_ep_queue,
+	TP_PROTO(struct dwc3_request *req),
+	TP_ARGS(req)
+);
+
+DEFINE_EVENT(dwc3_log_request, dwc3_ep_dequeue,
+	TP_PROTO(struct dwc3_request *req),
+	TP_ARGS(req)
+);
+
+DEFINE_EVENT(dwc3_log_request, dwc3_gadget_giveback,
+	TP_PROTO(struct dwc3_request *req),
+	TP_ARGS(req)
+);
+
+DECLARE_EVENT_CLASS(dwc3_log_generic_cmd,
+	TP_PROTO(unsigned int cmd, u32 param),
+	TP_ARGS(cmd, param),
+	TP_STRUCT__entry(
+		__field(unsigned int, cmd)
+		__field(u32, param)
+	),
+	TP_fast_assign(
+		__entry->cmd = cmd;
+		__entry->param = param;
+	),
+	TP_printk("cmd '%s' [%d] param %08x\n",
+		dwc3_gadget_generic_cmd_string(__entry->cmd),
+		__entry->cmd, __entry->param
+	)
+);
+
+DEFINE_EVENT(dwc3_log_generic_cmd, dwc3_gadget_generic_cmd,
+	TP_PROTO(unsigned int cmd, u32 param),
+	TP_ARGS(cmd, param)
+);
+
+DECLARE_EVENT_CLASS(dwc3_log_gadget_ep_cmd,
+	TP_PROTO(struct dwc3_ep *dep, unsigned int cmd,
+		struct dwc3_gadget_ep_cmd_params *params),
+	TP_ARGS(dep, cmd, params),
+	TP_STRUCT__entry(
+		__field(struct dwc3_ep *, dep)
+		__field(unsigned int, cmd)
+		__field(struct dwc3_gadget_ep_cmd_params *, params)
+	),
+	TP_fast_assign(
+		__entry->dep = dep;
+		__entry->cmd = cmd;
+		__entry->params = params;
+	),
+	TP_printk("%s: cmd '%s' [%d] params %08x %08x %08x\n",
+		__entry->dep->name, dwc3_gadget_ep_cmd_string(__entry->cmd),
+		__entry->cmd, __entry->params->param0,
+		__entry->params->param1, __entry->params->param2
+	)
+);
+
+DEFINE_EVENT(dwc3_log_gadget_ep_cmd, dwc3_gadget_ep_cmd,
+	TP_PROTO(struct dwc3_ep *dep, unsigned int cmd,
+		struct dwc3_gadget_ep_cmd_params *params),
+	TP_ARGS(dep, cmd, params)
+);
+
+DECLARE_EVENT_CLASS(dwc3_log_trb,
+	TP_PROTO(struct dwc3_ep *dep, struct dwc3_trb *trb),
+	TP_ARGS(dep, trb),
+	TP_STRUCT__entry(
+		__field(struct dwc3_ep *, dep)
+		__field(struct dwc3_trb *, trb)
+	),
+	TP_fast_assign(
+		__entry->dep = dep;
+		__entry->trb = trb;
+	),
+	TP_printk("%s: trb %p bph %08x bpl %08x size %08x ctrl %08x\n",
+		__entry->dep->name, __entry->trb, __entry->trb->bph,
+		__entry->trb->bpl, __entry->trb->size, __entry->trb->ctrl
+	)
+);
+
+DEFINE_EVENT(dwc3_log_trb, dwc3_prepare_trb,
+	TP_PROTO(struct dwc3_ep *dep, struct dwc3_trb *trb),
+	TP_ARGS(dep, trb)
+);
+
+DEFINE_EVENT(dwc3_log_trb, dwc3_complete_trb,
+	TP_PROTO(struct dwc3_ep *dep, struct dwc3_trb *trb),
+	TP_ARGS(dep, trb)
+);
+
+#endif /* __DWC3_TRACE_H */
+
+/* this part has to be here */
+
+#undef TRACE_INCLUDE_PATH
+#define TRACE_INCLUDE_PATH .
+
+#undef TRACE_INCLUDE_FILE
+#define TRACE_INCLUDE_FILE trace
+
+#include <trace/define_trace.h>
diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig
index 5c822afb6d70..c4880fc0d86e 100644
--- a/drivers/usb/gadget/Kconfig
+++ b/drivers/usb/gadget/Kconfig
@@ -181,6 +181,15 @@ config USB_F_MASS_STORAGE
 config USB_F_FS
 	tristate
 
+config USB_F_UAC1
+	tristate
+
+config USB_F_UAC2
+	tristate
+
+config USB_F_UVC
+	tristate
+
 choice
 	tristate "USB Gadget Drivers"
 	default USB_ETH
diff --git a/drivers/usb/gadget/Makefile b/drivers/usb/gadget/Makefile
index 9add915d41f7..598a67d6ba05 100644
--- a/drivers/usb/gadget/Makefile
+++ b/drivers/usb/gadget/Makefile
@@ -3,7 +3,7 @@
 #
 subdir-ccflags-$(CONFIG_USB_GADGET_DEBUG)	:= -DDEBUG
 subdir-ccflags-$(CONFIG_USB_GADGET_VERBOSE)	+= -DVERBOSE_DEBUG
-ccflags-y				+= -Idrivers/usb/gadget/udc
+ccflags-y				+= -I$(srctree)/drivers/usb/gadget/udc
 
 obj-$(CONFIG_USB_LIBCOMPOSITE)	+= libcomposite.o
 libcomposite-y			:= usbstring.o config.o epautoconf.o
diff --git a/drivers/usb/gadget/composite.c b/drivers/usb/gadget/composite.c
index 6935a822ce2b..a8c18df171c3 100644
--- a/drivers/usb/gadget/composite.c
+++ b/drivers/usb/gadget/composite.c
@@ -1956,7 +1956,6 @@ void composite_dev_cleanup(struct usb_composite_dev *cdev)
 	}
 	if (cdev->req) {
 		kfree(cdev->req->buf);
-		usb_ep_dequeue(cdev->gadget->ep0, cdev->req);
 		usb_ep_free_request(cdev->gadget->ep0, cdev->req);
 	}
 	cdev->next_string_id = 0;
@@ -2073,6 +2072,7 @@ static const struct usb_gadget_driver composite_driver_template = {
 	.unbind		= composite_unbind,
 
 	.setup		= composite_setup,
+	.reset		= composite_disconnect,
 	.disconnect	= composite_disconnect,
 
 	.suspend	= composite_suspend,
diff --git a/drivers/usb/gadget/configfs.c b/drivers/usb/gadget/configfs.c
index 811c2c7cc269..34034333f7f6 100644
--- a/drivers/usb/gadget/configfs.c
+++ b/drivers/usb/gadget/configfs.c
@@ -1450,6 +1450,7 @@ static const struct usb_gadget_driver configfs_driver_template = {
 	.unbind         = configfs_composite_unbind,
 
 	.setup          = composite_setup,
+	.reset          = composite_disconnect,
 	.disconnect     = composite_disconnect,
 
 	.max_speed	= USB_SPEED_SUPER,
diff --git a/drivers/usb/gadget/function/Makefile b/drivers/usb/gadget/function/Makefile
index 83ae1065149d..90701aa5a826 100644
--- a/drivers/usb/gadget/function/Makefile
+++ b/drivers/usb/gadget/function/Makefile
@@ -2,8 +2,8 @@
 # USB peripheral controller drivers
 #
 
-ccflags-y			:= -Idrivers/usb/gadget/
-ccflags-y			+= -Idrivers/usb/gadget/udc/
+ccflags-y			:= -I$(srctree)/drivers/usb/gadget/
+ccflags-y			+= -I$(srctree)/drivers/usb/gadget/udc/
 
 # USB Functions
 usb_f_acm-y			:= f_acm.o
@@ -32,3 +32,9 @@ usb_f_mass_storage-y		:= f_mass_storage.o storage_common.o
 obj-$(CONFIG_USB_F_MASS_STORAGE)+= usb_f_mass_storage.o
 usb_f_fs-y			:= f_fs.o
 obj-$(CONFIG_USB_F_FS)		+= usb_f_fs.o
+usb_f_uac1-y			:= f_uac1.o u_uac1.o
+obj-$(CONFIG_USB_F_UAC1)	+= usb_f_uac1.o
+usb_f_uac2-y			:= f_uac2.o
+obj-$(CONFIG_USB_F_UAC2)	+= usb_f_uac2.o
+usb_f_uvc-y			:= f_uvc.o uvc_queue.o uvc_v4l2.o uvc_video.o
+obj-$(CONFIG_USB_F_UVC)		+= usb_f_uvc.o
diff --git a/drivers/usb/gadget/function/f_acm.c b/drivers/usb/gadget/function/f_acm.c
index ab1065afbbd0..6da4685490ef 100644
--- a/drivers/usb/gadget/function/f_acm.c
+++ b/drivers/usb/gadget/function/f_acm.c
@@ -313,15 +313,15 @@ static void acm_complete_set_line_coding(struct usb_ep *ep,
 	struct usb_composite_dev *cdev = acm->port.func.config->cdev;
 
 	if (req->status != 0) {
-		DBG(cdev, "acm ttyGS%d completion, err %d\n",
-				acm->port_num, req->status);
+		dev_dbg(&cdev->gadget->dev, "acm ttyGS%d completion, err %d\n",
+			acm->port_num, req->status);
 		return;
 	}
 
 	/* normal completion */
 	if (req->actual != sizeof(acm->port_line_coding)) {
-		DBG(cdev, "acm ttyGS%d short resp, len %d\n",
-				acm->port_num, req->actual);
+		dev_dbg(&cdev->gadget->dev, "acm ttyGS%d short resp, len %d\n",
+			acm->port_num, req->actual);
 		usb_ep_set_halt(ep);
 	} else {
 		struct usb_cdc_line_coding	*value = req->buf;
@@ -397,14 +397,16 @@ static int acm_setup(struct usb_function *f, const struct usb_ctrlrequest *ctrl)
 
 	default:
 invalid:
-		VDBG(cdev, "invalid control req%02x.%02x v%04x i%04x l%d\n",
-			ctrl->bRequestType, ctrl->bRequest,
-			w_value, w_index, w_length);
+		dev_vdbg(&cdev->gadget->dev,
+			 "invalid control req%02x.%02x v%04x i%04x l%d\n",
+			 ctrl->bRequestType, ctrl->bRequest,
+			 w_value, w_index, w_length);
 	}
 
 	/* respond with data transfer or status phase? */
 	if (value >= 0) {
-		DBG(cdev, "acm ttyGS%d req%02x.%02x v%04x i%04x l%d\n",
+		dev_dbg(&cdev->gadget->dev,
+			"acm ttyGS%d req%02x.%02x v%04x i%04x l%d\n",
 			acm->port_num, ctrl->bRequestType, ctrl->bRequest,
 			w_value, w_index, w_length);
 		req->zero = 0;
@@ -428,10 +430,12 @@ static int acm_set_alt(struct usb_function *f, unsigned intf, unsigned alt)
 
 	if (intf == acm->ctrl_id) {
 		if (acm->notify->driver_data) {
-			VDBG(cdev, "reset acm control interface %d\n", intf);
+			dev_vdbg(&cdev->gadget->dev,
+				 "reset acm control interface %d\n", intf);
 			usb_ep_disable(acm->notify);
 		} else {
-			VDBG(cdev, "init acm ctrl interface %d\n", intf);
+			dev_vdbg(&cdev->gadget->dev,
+				 "init acm ctrl interface %d\n", intf);
 			if (config_ep_by_speed(cdev->gadget, f, acm->notify))
 				return -EINVAL;
 		}
@@ -440,11 +444,13 @@ static int acm_set_alt(struct usb_function *f, unsigned intf, unsigned alt)
 
 	} else if (intf == acm->data_id) {
 		if (acm->port.in->driver_data) {
-			DBG(cdev, "reset acm ttyGS%d\n", acm->port_num);
+			dev_dbg(&cdev->gadget->dev,
+				"reset acm ttyGS%d\n", acm->port_num);
 			gserial_disconnect(&acm->port);
 		}
 		if (!acm->port.in->desc || !acm->port.out->desc) {
-			DBG(cdev, "activate acm ttyGS%d\n", acm->port_num);
+			dev_dbg(&cdev->gadget->dev,
+				"activate acm ttyGS%d\n", acm->port_num);
 			if (config_ep_by_speed(cdev->gadget, f,
 					       acm->port.in) ||
 			    config_ep_by_speed(cdev->gadget, f,
@@ -467,7 +473,7 @@ static void acm_disable(struct usb_function *f)
 	struct f_acm	*acm = func_to_acm(f);
 	struct usb_composite_dev *cdev = f->config->cdev;
 
-	DBG(cdev, "acm ttyGS%d deactivated\n", acm->port_num);
+	dev_dbg(&cdev->gadget->dev, "acm ttyGS%d deactivated\n", acm->port_num);
 	gserial_disconnect(&acm->port);
 	usb_ep_disable(acm->notify);
 	acm->notify->driver_data = NULL;
@@ -537,8 +543,8 @@ static int acm_notify_serial_state(struct f_acm *acm)
 
 	spin_lock(&acm->lock);
 	if (acm->notify_req) {
-		DBG(cdev, "acm ttyGS%d serial state %04x\n",
-				acm->port_num, acm->serial_state);
+		dev_dbg(&cdev->gadget->dev, "acm ttyGS%d serial state %04x\n",
+			acm->port_num, acm->serial_state);
 		status = acm_cdc_notify(acm, USB_CDC_NOTIFY_SERIAL_STATE,
 				0, &acm->serial_state, sizeof(acm->serial_state));
 	} else {
@@ -691,12 +697,13 @@ acm_bind(struct usb_configuration *c, struct usb_function *f)
 	if (status)
 		goto fail;
 
-	DBG(cdev, "acm ttyGS%d: %s speed IN/%s OUT/%s NOTIFY/%s\n",
-			acm->port_num,
-			gadget_is_superspeed(c->cdev->gadget) ? "super" :
-			gadget_is_dualspeed(c->cdev->gadget) ? "dual" : "full",
-			acm->port.in->name, acm->port.out->name,
-			acm->notify->name);
+	dev_dbg(&cdev->gadget->dev,
+		"acm ttyGS%d: %s speed IN/%s OUT/%s NOTIFY/%s\n",
+		acm->port_num,
+		gadget_is_superspeed(c->cdev->gadget) ? "super" :
+		gadget_is_dualspeed(c->cdev->gadget) ? "dual" : "full",
+		acm->port.in->name, acm->port.out->name,
+		acm->notify->name);
 	return 0;
 
 fail:
diff --git a/drivers/usb/gadget/function/f_fs.c b/drivers/usb/gadget/function/f_fs.c
index 0dc3552d1360..4ad11e03cf54 100644
--- a/drivers/usb/gadget/function/f_fs.c
+++ b/drivers/usb/gadget/function/f_fs.c
@@ -1032,6 +1032,29 @@ static long ffs_epfile_ioctl(struct file *file, unsigned code,
 		case FUNCTIONFS_ENDPOINT_REVMAP:
 			ret = epfile->ep->num;
 			break;
+		case FUNCTIONFS_ENDPOINT_DESC:
+		{
+			int desc_idx;
+			struct usb_endpoint_descriptor *desc;
+
+			switch (epfile->ffs->gadget->speed) {
+			case USB_SPEED_SUPER:
+				desc_idx = 2;
+				break;
+			case USB_SPEED_HIGH:
+				desc_idx = 1;
+				break;
+			default:
+				desc_idx = 0;
+			}
+			desc = epfile->ep->descs[desc_idx];
+
+			spin_unlock_irq(&epfile->ffs->eps_lock);
+			ret = copy_to_user((void *)value, desc, sizeof(*desc));
+			if (ret)
+				ret = -EFAULT;
+			return ret;
+		}
 		default:
 			ret = -ENOTTY;
 		}
@@ -1534,7 +1557,10 @@ static int ffs_epfiles_create(struct ffs_data *ffs)
 		epfile->ffs = ffs;
 		mutex_init(&epfile->mutex);
 		init_waitqueue_head(&epfile->wait);
-		sprintf(epfiles->name, "ep%u",  i);
+		if (ffs->user_flags & FUNCTIONFS_VIRTUAL_ADDR)
+			sprintf(epfiles->name, "ep%02x", ffs->eps_addrmap[i]);
+		else
+			sprintf(epfiles->name, "ep%u", i);
 		if (!unlikely(ffs_sb_create_file(ffs->sb, epfiles->name, epfile,
 						 &ffs_epfile_operations,
 						 &epfile->dentry))) {
@@ -2083,10 +2109,12 @@ static int __ffs_data_got_descs(struct ffs_data *ffs,
 		break;
 	case FUNCTIONFS_DESCRIPTORS_MAGIC_V2:
 		flags = get_unaligned_le32(data + 8);
+		ffs->user_flags = flags;
 		if (flags & ~(FUNCTIONFS_HAS_FS_DESC |
 			      FUNCTIONFS_HAS_HS_DESC |
 			      FUNCTIONFS_HAS_SS_DESC |
-			      FUNCTIONFS_HAS_MS_OS_DESC)) {
+			      FUNCTIONFS_HAS_MS_OS_DESC |
+			      FUNCTIONFS_VIRTUAL_ADDR)) {
 			ret = -ENOSYS;
 			goto error;
 		}
@@ -2346,7 +2374,8 @@ static void __ffs_event_add(struct ffs_data *ffs,
 		break;
 
 	default:
-		BUG();
+		WARN(1, "%d: unknown event, this should not happen\n", type);
+		return;
 	}
 
 	{
@@ -2393,7 +2422,8 @@ static int __ffs_func_bind_do_descs(enum ffs_entity_type type, u8 *valuep,
 	struct usb_endpoint_descriptor *ds = (void *)desc;
 	struct ffs_function *func = priv;
 	struct ffs_ep *ffs_ep;
-	unsigned ep_desc_id, idx;
+	unsigned ep_desc_id;
+	int idx;
 	static const char *speed_names[] = { "full", "high", "super" };
 
 	if (type != FFS_DESCRIPTOR)
@@ -2441,7 +2471,13 @@ static int __ffs_func_bind_do_descs(enum ffs_entity_type type, u8 *valuep,
 	} else {
 		struct usb_request *req;
 		struct usb_ep *ep;
+		u8 bEndpointAddress;
 
+		/*
+		 * We back up bEndpointAddress because autoconfig overwrites
+		 * it with physical endpoint address.
+		 */
+		bEndpointAddress = ds->bEndpointAddress;
 		pr_vdebug("autoconfig\n");
 		ep = usb_ep_autoconfig(func->gadget, ds);
 		if (unlikely(!ep))
@@ -2456,6 +2492,12 @@ static int __ffs_func_bind_do_descs(enum ffs_entity_type type, u8 *valuep,
 		ffs_ep->req = req;
 		func->eps_revmap[ds->bEndpointAddress &
 				 USB_ENDPOINT_NUMBER_MASK] = idx + 1;
+		/*
+		 * If we use virtual address mapping, we restore
+		 * original bEndpointAddress value.
+		 */
+		if (func->ffs->user_flags & FUNCTIONFS_VIRTUAL_ADDR)
+			ds->bEndpointAddress = bEndpointAddress;
 	}
 	ffs_dump_mem(": Rewritten ep desc", ds, ds->bLength);
 
@@ -2900,6 +2942,8 @@ static int ffs_func_setup(struct usb_function *f,
 		ret = ffs_func_revmap_ep(func, le16_to_cpu(creq->wIndex));
 		if (unlikely(ret < 0))
 			return ret;
+		if (func->ffs->user_flags & FUNCTIONFS_VIRTUAL_ADDR)
+			ret = func->ffs->eps_addrmap[ret];
 		break;
 
 	default:
diff --git a/drivers/usb/gadget/function/f_loopback.c b/drivers/usb/gadget/function/f_loopback.c
index 4557cd03f0b1..bf04389137e6 100644
--- a/drivers/usb/gadget/function/f_loopback.c
+++ b/drivers/usb/gadget/function/f_loopback.c
@@ -298,7 +298,8 @@ static void disable_loopback(struct f_loopback *loop)
 	struct usb_composite_dev	*cdev;
 
 	cdev = loop->function.config->cdev;
-	disable_endpoints(cdev, loop->in_ep, loop->out_ep, NULL, NULL);
+	disable_endpoints(cdev, loop->in_ep, loop->out_ep, NULL, NULL, NULL,
+			NULL);
 	VDBG(cdev, "%s disabled\n", loop->function.name);
 }
 
diff --git a/drivers/usb/gadget/function/f_mass_storage.c b/drivers/usb/gadget/function/f_mass_storage.c
index b96393908860..811929cd4c9e 100644
--- a/drivers/usb/gadget/function/f_mass_storage.c
+++ b/drivers/usb/gadget/function/f_mass_storage.c
@@ -566,22 +566,22 @@ static void start_transfer(struct fsg_dev *fsg, struct usb_ep *ep,
 	*pbusy = 1;
 	*state = BUF_STATE_BUSY;
 	spin_unlock_irq(&fsg->common->lock);
+
 	rc = usb_ep_queue(ep, req, GFP_KERNEL);
-	if (rc != 0) {
-		*pbusy = 0;
-		*state = BUF_STATE_EMPTY;
+	if (rc == 0)
+		return;  /* All good, we're done */
 
-		/* We can't do much more than wait for a reset */
+	*pbusy = 0;
+	*state = BUF_STATE_EMPTY;
 
-		/*
-		 * Note: currently the net2280 driver fails zero-length
-		 * submissions if DMA is enabled.
-		 */
-		if (rc != -ESHUTDOWN &&
-		    !(rc == -EOPNOTSUPP && req->length == 0))
-			WARNING(fsg, "error in submission: %s --> %d\n",
-				ep->name, rc);
-	}
+	/* We can't do much more than wait for a reset */
+
+	/*
+	 * Note: currently the net2280 driver fails zero-length
+	 * submissions if DMA is enabled.
+	 */
+	if (rc != -ESHUTDOWN && !(rc == -EOPNOTSUPP && req->length == 0))
+		WARNING(fsg, "error in submission: %s --> %d\n", ep->name, rc);
 }
 
 static bool start_in_transfer(struct fsg_common *common, struct fsg_buffhd *bh)
@@ -3665,4 +3665,3 @@ void fsg_config_from_params(struct fsg_config *cfg,
 	cfg->fsg_num_buffers = fsg_num_buffers;
 }
 EXPORT_SYMBOL_GPL(fsg_config_from_params);
-
diff --git a/drivers/usb/gadget/function/f_obex.c b/drivers/usb/gadget/function/f_obex.c
index aebae1853bce..5f40080c92cc 100644
--- a/drivers/usb/gadget/function/f_obex.c
+++ b/drivers/usb/gadget/function/f_obex.c
@@ -200,19 +200,22 @@ static int obex_set_alt(struct usb_function *f, unsigned intf, unsigned alt)
 		if (alt != 0)
 			goto fail;
 		/* NOP */
-		DBG(cdev, "reset obex ttyGS%d control\n", obex->port_num);
+		dev_dbg(&cdev->gadget->dev,
+			"reset obex ttyGS%d control\n", obex->port_num);
 
 	} else if (intf == obex->data_id) {
 		if (alt > 1)
 			goto fail;
 
 		if (obex->port.in->driver_data) {
-			DBG(cdev, "reset obex ttyGS%d\n", obex->port_num);
+			dev_dbg(&cdev->gadget->dev,
+				"reset obex ttyGS%d\n", obex->port_num);
 			gserial_disconnect(&obex->port);
 		}
 
 		if (!obex->port.in->desc || !obex->port.out->desc) {
-			DBG(cdev, "init obex ttyGS%d\n", obex->port_num);
+			dev_dbg(&cdev->gadget->dev,
+				"init obex ttyGS%d\n", obex->port_num);
 			if (config_ep_by_speed(cdev->gadget, f,
 					       obex->port.in) ||
 			    config_ep_by_speed(cdev->gadget, f,
@@ -224,7 +227,8 @@ static int obex_set_alt(struct usb_function *f, unsigned intf, unsigned alt)
 		}
 
 		if (alt == 1) {
-			DBG(cdev, "activate obex ttyGS%d\n", obex->port_num);
+			dev_dbg(&cdev->gadget->dev,
+				"activate obex ttyGS%d\n", obex->port_num);
 			gserial_connect(&obex->port, obex->port_num);
 		}
 
@@ -252,7 +256,7 @@ static void obex_disable(struct usb_function *f)
 	struct f_obex	*obex = func_to_obex(f);
 	struct usb_composite_dev *cdev = f->config->cdev;
 
-	DBG(cdev, "obex ttyGS%d disable\n", obex->port_num);
+	dev_dbg(&cdev->gadget->dev, "obex ttyGS%d disable\n", obex->port_num);
 	gserial_disconnect(&obex->port);
 }
 
@@ -269,7 +273,8 @@ static void obex_connect(struct gserial *g)
 
 	status = usb_function_activate(&g->func);
 	if (status)
-		DBG(cdev, "obex ttyGS%d function activate --> %d\n",
+		dev_dbg(&cdev->gadget->dev,
+			"obex ttyGS%d function activate --> %d\n",
 			obex->port_num, status);
 }
 
@@ -284,7 +289,8 @@ static void obex_disconnect(struct gserial *g)
 
 	status = usb_function_deactivate(&g->func);
 	if (status)
-		DBG(cdev, "obex ttyGS%d function deactivate --> %d\n",
+		dev_dbg(&cdev->gadget->dev,
+			"obex ttyGS%d function deactivate --> %d\n",
 			obex->port_num, status);
 }
 
@@ -383,10 +389,10 @@ static int obex_bind(struct usb_configuration *c, struct usb_function *f)
 		obex->can_activate = true;
 
 
-	DBG(cdev, "obex ttyGS%d: %s speed IN/%s OUT/%s\n",
-			obex->port_num,
-			gadget_is_dualspeed(c->cdev->gadget) ? "dual" : "full",
-			obex->port.in->name, obex->port.out->name);
+	dev_dbg(&cdev->gadget->dev, "obex ttyGS%d: %s speed IN/%s OUT/%s\n",
+		obex->port_num,
+		gadget_is_dualspeed(c->cdev->gadget) ? "dual" : "full",
+		obex->port.in->name, obex->port.out->name);
 
 	return 0;
 
diff --git a/drivers/usb/gadget/function/f_serial.c b/drivers/usb/gadget/function/f_serial.c
index 9ecbcbf36a45..2e02dfabc7ae 100644
--- a/drivers/usb/gadget/function/f_serial.c
+++ b/drivers/usb/gadget/function/f_serial.c
@@ -155,11 +155,13 @@ static int gser_set_alt(struct usb_function *f, unsigned intf, unsigned alt)
 	/* we know alt == 0, so this is an activation or a reset */
 
 	if (gser->port.in->driver_data) {
-		DBG(cdev, "reset generic ttyGS%d\n", gser->port_num);
+		dev_dbg(&cdev->gadget->dev,
+			"reset generic ttyGS%d\n", gser->port_num);
 		gserial_disconnect(&gser->port);
 	}
 	if (!gser->port.in->desc || !gser->port.out->desc) {
-		DBG(cdev, "activate generic ttyGS%d\n", gser->port_num);
+		dev_dbg(&cdev->gadget->dev,
+			"activate generic ttyGS%d\n", gser->port_num);
 		if (config_ep_by_speed(cdev->gadget, f, gser->port.in) ||
 		    config_ep_by_speed(cdev->gadget, f, gser->port.out)) {
 			gser->port.in->desc = NULL;
@@ -176,7 +178,8 @@ static void gser_disable(struct usb_function *f)
 	struct f_gser	*gser = func_to_gser(f);
 	struct usb_composite_dev *cdev = f->config->cdev;
 
-	DBG(cdev, "generic ttyGS%d deactivated\n", gser->port_num);
+	dev_dbg(&cdev->gadget->dev,
+		"generic ttyGS%d deactivated\n", gser->port_num);
 	gserial_disconnect(&gser->port);
 }
 
@@ -239,11 +242,11 @@ static int gser_bind(struct usb_configuration *c, struct usb_function *f)
 			gser_ss_function);
 	if (status)
 		goto fail;
-	DBG(cdev, "generic ttyGS%d: %s speed IN/%s OUT/%s\n",
-			gser->port_num,
-			gadget_is_superspeed(c->cdev->gadget) ? "super" :
-			gadget_is_dualspeed(c->cdev->gadget) ? "dual" : "full",
-			gser->port.in->name, gser->port.out->name);
+	dev_dbg(&cdev->gadget->dev, "generic ttyGS%d: %s speed IN/%s OUT/%s\n",
+		gser->port_num,
+		gadget_is_superspeed(c->cdev->gadget) ? "super" :
+		gadget_is_dualspeed(c->cdev->gadget) ? "dual" : "full",
+		gser->port.in->name, gser->port.out->name);
 	return 0;
 
 fail:
diff --git a/drivers/usb/gadget/function/f_sourcesink.c b/drivers/usb/gadget/function/f_sourcesink.c
index d3cd52db78fe..80be25b32cd7 100644
--- a/drivers/usb/gadget/function/f_sourcesink.c
+++ b/drivers/usb/gadget/function/f_sourcesink.c
@@ -23,6 +23,15 @@
 #include "gadget_chips.h"
 #include "u_f.h"
 
+#define USB_MS_TO_SS_INTERVAL(x) USB_MS_TO_HS_INTERVAL(x)
+
+enum eptype {
+	EP_CONTROL = 0,
+	EP_BULK,
+	EP_ISOC,
+	EP_INTERRUPT,
+};
+
 /*
  * SOURCE/SINK FUNCTION ... a primary testing vehicle for USB peripheral
  * controller drivers.
@@ -55,6 +64,8 @@ struct f_sourcesink {
 	struct usb_ep		*out_ep;
 	struct usb_ep		*iso_in_ep;
 	struct usb_ep		*iso_out_ep;
+	struct usb_ep		*int_in_ep;
+	struct usb_ep		*int_out_ep;
 	int			cur_alt;
 };
 
@@ -68,6 +79,10 @@ static unsigned isoc_interval;
 static unsigned isoc_maxpacket;
 static unsigned isoc_mult;
 static unsigned isoc_maxburst;
+static unsigned int_interval; /* In ms */
+static unsigned int_maxpacket;
+static unsigned int_mult;
+static unsigned int_maxburst;
 static unsigned buflen;
 
 /*-------------------------------------------------------------------------*/
@@ -92,6 +107,16 @@ static struct usb_interface_descriptor source_sink_intf_alt1 = {
 	/* .iInterface		= DYNAMIC */
 };
 
+static struct usb_interface_descriptor source_sink_intf_alt2 = {
+	.bLength =		USB_DT_INTERFACE_SIZE,
+	.bDescriptorType =	USB_DT_INTERFACE,
+
+	.bAlternateSetting =	2,
+	.bNumEndpoints =	2,
+	.bInterfaceClass =	USB_CLASS_VENDOR_SPEC,
+	/* .iInterface		= DYNAMIC */
+};
+
 /* full speed support: */
 
 static struct usb_endpoint_descriptor fs_source_desc = {
@@ -130,6 +155,26 @@ static struct usb_endpoint_descriptor fs_iso_sink_desc = {
 	.bInterval =		4,
 };
 
+static struct usb_endpoint_descriptor fs_int_source_desc = {
+	.bLength =		USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType =	USB_DT_ENDPOINT,
+
+	.bEndpointAddress =	USB_DIR_IN,
+	.bmAttributes =		USB_ENDPOINT_XFER_INT,
+	.wMaxPacketSize =	cpu_to_le16(64),
+	.bInterval =		GZERO_INT_INTERVAL,
+};
+
+static struct usb_endpoint_descriptor fs_int_sink_desc = {
+	.bLength =		USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType =	USB_DT_ENDPOINT,
+
+	.bEndpointAddress =	USB_DIR_OUT,
+	.bmAttributes =		USB_ENDPOINT_XFER_INT,
+	.wMaxPacketSize =	cpu_to_le16(64),
+	.bInterval =		GZERO_INT_INTERVAL,
+};
+
 static struct usb_descriptor_header *fs_source_sink_descs[] = {
 	(struct usb_descriptor_header *) &source_sink_intf_alt0,
 	(struct usb_descriptor_header *) &fs_sink_desc,
@@ -140,6 +185,10 @@ static struct usb_descriptor_header *fs_source_sink_descs[] = {
 	(struct usb_descriptor_header *) &fs_source_desc,
 	(struct usb_descriptor_header *) &fs_iso_sink_desc,
 	(struct usb_descriptor_header *) &fs_iso_source_desc,
+	(struct usb_descriptor_header *) &source_sink_intf_alt2,
+#define FS_ALT_IFC_2_OFFSET	8
+	(struct usb_descriptor_header *) &fs_int_sink_desc,
+	(struct usb_descriptor_header *) &fs_int_source_desc,
 	NULL,
 };
 
@@ -179,6 +228,24 @@ static struct usb_endpoint_descriptor hs_iso_sink_desc = {
 	.bInterval =		4,
 };
 
+static struct usb_endpoint_descriptor hs_int_source_desc = {
+	.bLength =		USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType =	USB_DT_ENDPOINT,
+
+	.bmAttributes =		USB_ENDPOINT_XFER_INT,
+	.wMaxPacketSize =	cpu_to_le16(1024),
+	.bInterval =		USB_MS_TO_HS_INTERVAL(GZERO_INT_INTERVAL),
+};
+
+static struct usb_endpoint_descriptor hs_int_sink_desc = {
+	.bLength =		USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType =	USB_DT_ENDPOINT,
+
+	.bmAttributes =		USB_ENDPOINT_XFER_INT,
+	.wMaxPacketSize =	cpu_to_le16(1024),
+	.bInterval =		USB_MS_TO_HS_INTERVAL(GZERO_INT_INTERVAL),
+};
+
 static struct usb_descriptor_header *hs_source_sink_descs[] = {
 	(struct usb_descriptor_header *) &source_sink_intf_alt0,
 	(struct usb_descriptor_header *) &hs_source_desc,
@@ -189,6 +256,10 @@ static struct usb_descriptor_header *hs_source_sink_descs[] = {
 	(struct usb_descriptor_header *) &hs_sink_desc,
 	(struct usb_descriptor_header *) &hs_iso_source_desc,
 	(struct usb_descriptor_header *) &hs_iso_sink_desc,
+	(struct usb_descriptor_header *) &source_sink_intf_alt2,
+#define HS_ALT_IFC_2_OFFSET	8
+	(struct usb_descriptor_header *) &hs_int_source_desc,
+	(struct usb_descriptor_header *) &hs_int_sink_desc,
 	NULL,
 };
 
@@ -264,6 +335,42 @@ static struct usb_ss_ep_comp_descriptor ss_iso_sink_comp_desc = {
 	.wBytesPerInterval =	cpu_to_le16(1024),
 };
 
+static struct usb_endpoint_descriptor ss_int_source_desc = {
+	.bLength =		USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType =	USB_DT_ENDPOINT,
+
+	.bmAttributes =		USB_ENDPOINT_XFER_INT,
+	.wMaxPacketSize =	cpu_to_le16(1024),
+	.bInterval =		USB_MS_TO_SS_INTERVAL(GZERO_INT_INTERVAL),
+};
+
+struct usb_ss_ep_comp_descriptor ss_int_source_comp_desc = {
+	.bLength =		USB_DT_SS_EP_COMP_SIZE,
+	.bDescriptorType =	USB_DT_SS_ENDPOINT_COMP,
+
+	.bMaxBurst =		0,
+	.bmAttributes =		0,
+	.wBytesPerInterval =	cpu_to_le16(1024),
+};
+
+static struct usb_endpoint_descriptor ss_int_sink_desc = {
+	.bLength =		USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType =	USB_DT_ENDPOINT,
+
+	.bmAttributes =		USB_ENDPOINT_XFER_INT,
+	.wMaxPacketSize =	cpu_to_le16(1024),
+	.bInterval =		USB_MS_TO_SS_INTERVAL(GZERO_INT_INTERVAL),
+};
+
+struct usb_ss_ep_comp_descriptor ss_int_sink_comp_desc = {
+	.bLength =		USB_DT_SS_EP_COMP_SIZE,
+	.bDescriptorType =	USB_DT_SS_ENDPOINT_COMP,
+
+	.bMaxBurst =		0,
+	.bmAttributes =		0,
+	.wBytesPerInterval =	cpu_to_le16(1024),
+};
+
 static struct usb_descriptor_header *ss_source_sink_descs[] = {
 	(struct usb_descriptor_header *) &source_sink_intf_alt0,
 	(struct usb_descriptor_header *) &ss_source_desc,
@@ -280,6 +387,12 @@ static struct usb_descriptor_header *ss_source_sink_descs[] = {
 	(struct usb_descriptor_header *) &ss_iso_source_comp_desc,
 	(struct usb_descriptor_header *) &ss_iso_sink_desc,
 	(struct usb_descriptor_header *) &ss_iso_sink_comp_desc,
+	(struct usb_descriptor_header *) &source_sink_intf_alt2,
+#define SS_ALT_IFC_2_OFFSET	14
+	(struct usb_descriptor_header *) &ss_int_source_desc,
+	(struct usb_descriptor_header *) &ss_int_source_comp_desc,
+	(struct usb_descriptor_header *) &ss_int_sink_desc,
+	(struct usb_descriptor_header *) &ss_int_sink_comp_desc,
 	NULL,
 };
 
@@ -301,6 +414,21 @@ static struct usb_gadget_strings *sourcesink_strings[] = {
 };
 
 /*-------------------------------------------------------------------------*/
+static const char *get_ep_string(enum eptype ep_type)
+{
+	switch (ep_type) {
+	case EP_ISOC:
+		return "ISOC-";
+	case EP_INTERRUPT:
+		return "INTERRUPT-";
+	case EP_CONTROL:
+		return "CTRL-";
+	case EP_BULK:
+		return "BULK-";
+	default:
+		return "UNKNOWN-";
+	}
+}
 
 static inline struct usb_request *ss_alloc_ep_req(struct usb_ep *ep, int len)
 {
@@ -328,7 +456,8 @@ static void disable_ep(struct usb_composite_dev *cdev, struct usb_ep *ep)
 
 void disable_endpoints(struct usb_composite_dev *cdev,
 		struct usb_ep *in, struct usb_ep *out,
-		struct usb_ep *iso_in, struct usb_ep *iso_out)
+		struct usb_ep *iso_in, struct usb_ep *iso_out,
+		struct usb_ep *int_in, struct usb_ep *int_out)
 {
 	disable_ep(cdev, in);
 	disable_ep(cdev, out);
@@ -336,6 +465,10 @@ void disable_endpoints(struct usb_composite_dev *cdev,
 		disable_ep(cdev, iso_in);
 	if (iso_out)
 		disable_ep(cdev, iso_out);
+	if (int_in)
+		disable_ep(cdev, int_in);
+	if (int_out)
+		disable_ep(cdev, int_out);
 }
 
 static int
@@ -352,6 +485,7 @@ sourcesink_bind(struct usb_configuration *c, struct usb_function *f)
 		return id;
 	source_sink_intf_alt0.bInterfaceNumber = id;
 	source_sink_intf_alt1.bInterfaceNumber = id;
+	source_sink_intf_alt2.bInterfaceNumber = id;
 
 	/* allocate bulk endpoints */
 	ss->in_ep = usb_ep_autoconfig(cdev->gadget, &fs_source_desc);
@@ -412,14 +546,55 @@ no_iso:
 	if (isoc_maxpacket > 1024)
 		isoc_maxpacket = 1024;
 
+	/* sanity check the interrupt module parameters */
+	if (int_interval < 1)
+		int_interval = 1;
+	if (int_interval > 4096)
+		int_interval = 4096;
+	if (int_mult > 2)
+		int_mult = 2;
+	if (int_maxburst > 15)
+		int_maxburst = 15;
+
+	/* fill in the FS interrupt descriptors from the module parameters */
+	fs_int_source_desc.wMaxPacketSize = int_maxpacket > 64 ?
+						64 : int_maxpacket;
+	fs_int_source_desc.bInterval = int_interval > 255 ?
+						255 : int_interval;
+	fs_int_sink_desc.wMaxPacketSize = int_maxpacket > 64 ?
+						64 : int_maxpacket;
+	fs_int_sink_desc.bInterval = int_interval > 255 ?
+						255 : int_interval;
+
+	/* allocate int endpoints */
+	ss->int_in_ep = usb_ep_autoconfig(cdev->gadget, &fs_int_source_desc);
+	if (!ss->int_in_ep)
+		goto no_int;
+	ss->int_in_ep->driver_data = cdev;	/* claim */
+
+	ss->int_out_ep = usb_ep_autoconfig(cdev->gadget, &fs_int_sink_desc);
+	if (ss->int_out_ep) {
+		ss->int_out_ep->driver_data = cdev;	/* claim */
+	} else {
+		ss->int_in_ep->driver_data = NULL;
+		ss->int_in_ep = NULL;
+no_int:
+		fs_source_sink_descs[FS_ALT_IFC_2_OFFSET] = NULL;
+		hs_source_sink_descs[HS_ALT_IFC_2_OFFSET] = NULL;
+		ss_source_sink_descs[SS_ALT_IFC_2_OFFSET] = NULL;
+	}
+
+	if (int_maxpacket > 1024)
+		int_maxpacket = 1024;
+
 	/* support high speed hardware */
 	hs_source_desc.bEndpointAddress = fs_source_desc.bEndpointAddress;
 	hs_sink_desc.bEndpointAddress = fs_sink_desc.bEndpointAddress;
 
 	/*
-	 * Fill in the HS isoc descriptors from the module parameters.
-	 * We assume that the user knows what they are doing and won't
-	 * give parameters that their UDC doesn't support.
+	 * Fill in the HS isoc and interrupt descriptors from the module
+	 * parameters. We assume that the user knows what they are doing and
+	 * won't give parameters that their UDC doesn't support.
 	 */
 	hs_iso_source_desc.wMaxPacketSize = isoc_maxpacket;
 	hs_iso_source_desc.wMaxPacketSize |= isoc_mult << 11;
@@ -432,6 +607,17 @@ no_iso:
 	hs_iso_sink_desc.bInterval = isoc_interval;
 	hs_iso_sink_desc.bEndpointAddress = fs_iso_sink_desc.bEndpointAddress;
 
+	hs_int_source_desc.wMaxPacketSize = int_maxpacket;
+	hs_int_source_desc.wMaxPacketSize |= int_mult << 11;
+	hs_int_source_desc.bInterval = USB_MS_TO_HS_INTERVAL(int_interval);
+	hs_int_source_desc.bEndpointAddress =
+		fs_int_source_desc.bEndpointAddress;
+
+	hs_int_sink_desc.wMaxPacketSize = int_maxpacket;
+	hs_int_sink_desc.wMaxPacketSize |= int_mult << 11;
+	hs_int_sink_desc.bInterval = USB_MS_TO_HS_INTERVAL(int_interval);
+	hs_int_sink_desc.bEndpointAddress = fs_int_sink_desc.bEndpointAddress;
+
 	/* support super speed hardware */
 	ss_source_desc.bEndpointAddress =
 		fs_source_desc.bEndpointAddress;
@@ -439,9 +625,9 @@ no_iso:
 		fs_sink_desc.bEndpointAddress;
 
 	/*
-	 * Fill in the SS isoc descriptors from the module parameters.
-	 * We assume that the user knows what they are doing and won't
-	 * give parameters that their UDC doesn't support.
+	 * Fill in the SS isoc and interrupt descriptors from the module
+	 * parameters. We assume that the user knows what they are doing and
+	 * won't give parameters that their UDC doesn't support.
 	 */
 	ss_iso_source_desc.wMaxPacketSize = isoc_maxpacket;
 	ss_iso_source_desc.bInterval = isoc_interval;
@@ -460,17 +646,37 @@ no_iso:
 		isoc_maxpacket * (isoc_mult + 1) * (isoc_maxburst + 1);
 	ss_iso_sink_desc.bEndpointAddress = fs_iso_sink_desc.bEndpointAddress;
 
+	ss_int_source_desc.wMaxPacketSize = int_maxpacket;
+	ss_int_source_desc.bInterval = USB_MS_TO_SS_INTERVAL(int_interval);
+	ss_int_source_comp_desc.bmAttributes = int_mult;
+	ss_int_source_comp_desc.bMaxBurst = int_maxburst;
+	ss_int_source_comp_desc.wBytesPerInterval =
+		int_maxpacket * (int_mult + 1) * (int_maxburst + 1);
+	ss_int_source_desc.bEndpointAddress =
+		fs_int_source_desc.bEndpointAddress;
+
+	ss_int_sink_desc.wMaxPacketSize = int_maxpacket;
+	ss_int_sink_desc.bInterval = USB_MS_TO_SS_INTERVAL(int_interval);
+	ss_int_sink_comp_desc.bmAttributes = int_mult;
+	ss_int_sink_comp_desc.bMaxBurst = int_maxburst;
+	ss_int_sink_comp_desc.wBytesPerInterval =
+		int_maxpacket * (int_mult + 1) * (int_maxburst + 1);
+	ss_int_sink_desc.bEndpointAddress = fs_int_sink_desc.bEndpointAddress;
+
 	ret = usb_assign_descriptors(f, fs_source_sink_descs,
 			hs_source_sink_descs, ss_source_sink_descs);
 	if (ret)
 		return ret;
 
-	DBG(cdev, "%s speed %s: IN/%s, OUT/%s, ISO-IN/%s, ISO-OUT/%s\n",
+	DBG(cdev, "%s speed %s: IN/%s, OUT/%s, ISO-IN/%s, ISO-OUT/%s, "
+			"INT-IN/%s, INT-OUT/%s\n",
 	    (gadget_is_superspeed(c->cdev->gadget) ? "super" :
 	     (gadget_is_dualspeed(c->cdev->gadget) ? "dual" : "full")),
 			f->name, ss->in_ep->name, ss->out_ep->name,
 			ss->iso_in_ep ? ss->iso_in_ep->name : "<none>",
-			ss->iso_out_ep ? ss->iso_out_ep->name : "<none>");
+			ss->iso_out_ep ? ss->iso_out_ep->name : "<none>",
+			ss->int_in_ep ? ss->int_in_ep->name : "<none>",
+			ss->int_out_ep ? ss->int_out_ep->name : "<none>");
 	return 0;
 }
 
@@ -601,14 +807,15 @@ static void source_sink_complete(struct usb_ep *ep, struct usb_request *req)
 }
 
 static int source_sink_start_ep(struct f_sourcesink *ss, bool is_in,
-		bool is_iso, int speed)
+		enum eptype ep_type, int speed)
 {
 	struct usb_ep		*ep;
 	struct usb_request	*req;
 	int			i, size, status;
 
 	for (i = 0; i < 8; i++) {
-		if (is_iso) {
+		switch (ep_type) {
+		case EP_ISOC:
 			switch (speed) {
 			case USB_SPEED_SUPER:
 				size = isoc_maxpacket * (isoc_mult + 1) *
@@ -624,9 +831,28 @@ static int source_sink_start_ep(struct f_sourcesink *ss, bool is_in,
 			}
 			ep = is_in ? ss->iso_in_ep : ss->iso_out_ep;
 			req = ss_alloc_ep_req(ep, size);
-		} else {
+			break;
+		case EP_INTERRUPT:
+			switch (speed) {
+			case USB_SPEED_SUPER:
+				size = int_maxpacket * (int_mult + 1) *
+						(int_maxburst + 1);
+				break;
+			case USB_SPEED_HIGH:
+				size = int_maxpacket * (int_mult + 1);
+				break;
+			default:
+				size = int_maxpacket > 1023 ?
+						1023 : int_maxpacket;
+				break;
+			}
+			ep = is_in ? ss->int_in_ep : ss->int_out_ep;
+			req = ss_alloc_ep_req(ep, size);
+			break;
+		default:
 			ep = is_in ? ss->in_ep : ss->out_ep;
 			req = ss_alloc_ep_req(ep, 0);
+			break;
 		}
 
 		if (!req)
@@ -644,12 +870,12 @@ static int source_sink_start_ep(struct f_sourcesink *ss, bool is_in,
 
 			cdev = ss->function.config->cdev;
 			ERROR(cdev, "start %s%s %s --> %d\n",
-			      is_iso ? "ISO-" : "", is_in ? "IN" : "OUT",
-			      ep->name, status);
+				get_ep_string(ep_type), is_in ? "IN" : "OUT",
+				ep->name, status);
 			free_ep_req(ep, req);
 		}
 
-		if (!is_iso)
+		if (!(ep_type == EP_ISOC))
 			break;
 	}
 
@@ -662,7 +888,7 @@ static void disable_source_sink(struct f_sourcesink *ss)
 
 	cdev = ss->function.config->cdev;
 	disable_endpoints(cdev, ss->in_ep, ss->out_ep, ss->iso_in_ep,
-			ss->iso_out_ep);
+			ss->iso_out_ep, ss->int_in_ep, ss->int_out_ep);
 	VDBG(cdev, "%s disabled\n", ss->function.name);
 }
 
@@ -674,6 +900,62 @@ enable_source_sink(struct usb_composite_dev *cdev, struct f_sourcesink *ss,
 	int					speed = cdev->gadget->speed;
 	struct usb_ep				*ep;
 
+	if (alt == 2) {
+		/* Configure for periodic interrupt endpoint */
+		ep = ss->int_in_ep;
+		if (ep) {
+			result = config_ep_by_speed(cdev->gadget,
+					&(ss->function), ep);
+			if (result)
+				return result;
+
+			result = usb_ep_enable(ep);
+			if (result < 0)
+				return result;
+
+			ep->driver_data = ss;
+			result = source_sink_start_ep(ss, true, EP_INTERRUPT,
+					speed);
+			if (result < 0) {
+fail1:
+				ep = ss->int_in_ep;
+				if (ep) {
+					usb_ep_disable(ep);
+					ep->driver_data = NULL;
+				}
+				return result;
+			}
+		}
+
+		/*
+		 * one interrupt endpoint reads (sinks) anything OUT (from the
+		 * host)
+		 */
+		ep = ss->int_out_ep;
+		if (ep) {
+			result = config_ep_by_speed(cdev->gadget,
+					&(ss->function), ep);
+			if (result)
+				goto fail1;
+
+			result = usb_ep_enable(ep);
+			if (result < 0)
+				goto fail1;
+
+			ep->driver_data = ss;
+			result = source_sink_start_ep(ss, false, EP_INTERRUPT,
+					speed);
+			if (result < 0) {
+				ep = ss->int_out_ep;
+				usb_ep_disable(ep);
+				ep->driver_data = NULL;
+				goto fail1;
+			}
+		}
+
+		goto out;
+	}
+
 	/* one bulk endpoint writes (sources) zeroes IN (to the host) */
 	ep = ss->in_ep;
 	result = config_ep_by_speed(cdev->gadget, &(ss->function), ep);
@@ -684,7 +966,7 @@ enable_source_sink(struct usb_composite_dev *cdev, struct f_sourcesink *ss,
 		return result;
 	ep->driver_data = ss;
 
-	result = source_sink_start_ep(ss, true, false, speed);
+	result = source_sink_start_ep(ss, true, EP_BULK, speed);
 	if (result < 0) {
 fail:
 		ep = ss->in_ep;
@@ -703,7 +985,7 @@ fail:
 		goto fail;
 	ep->driver_data = ss;
 
-	result = source_sink_start_ep(ss, false, false, speed);
+	result = source_sink_start_ep(ss, false, EP_BULK, speed);
 	if (result < 0) {
 fail2:
 		ep = ss->out_ep;
@@ -726,7 +1008,7 @@ fail2:
 			goto fail2;
 		ep->driver_data = ss;
 
-		result = source_sink_start_ep(ss, true, true, speed);
+		result = source_sink_start_ep(ss, true, EP_ISOC, speed);
 		if (result < 0) {
 fail3:
 			ep = ss->iso_in_ep;
@@ -749,13 +1031,14 @@ fail3:
 			goto fail3;
 		ep->driver_data = ss;
 
-		result = source_sink_start_ep(ss, false, true, speed);
+		result = source_sink_start_ep(ss, false, EP_ISOC, speed);
 		if (result < 0) {
 			usb_ep_disable(ep);
 			ep->driver_data = NULL;
 			goto fail3;
 		}
 	}
+
 out:
 	ss->cur_alt = alt;
 
@@ -771,6 +1054,8 @@ static int sourcesink_set_alt(struct usb_function *f,
 
 	if (ss->in_ep->driver_data)
 		disable_source_sink(ss);
+	else if (alt == 2 && ss->int_in_ep->driver_data)
+		disable_source_sink(ss);
 	return enable_source_sink(cdev, ss, alt);
 }
 
@@ -883,6 +1168,10 @@ static struct usb_function *source_sink_alloc_func(
 	isoc_maxpacket = ss_opts->isoc_maxpacket;
 	isoc_mult = ss_opts->isoc_mult;
 	isoc_maxburst = ss_opts->isoc_maxburst;
+	int_interval = ss_opts->int_interval;
+	int_maxpacket = ss_opts->int_maxpacket;
+	int_mult = ss_opts->int_mult;
+	int_maxburst = ss_opts->int_maxburst;
 	buflen = ss_opts->bulk_buflen;
 
 	ss->function.name = "source/sink";
@@ -1179,6 +1468,182 @@ static struct f_ss_opts_attribute f_ss_opts_bulk_buflen =
 			f_ss_opts_bulk_buflen_show,
 			f_ss_opts_bulk_buflen_store);
 
+static ssize_t f_ss_opts_int_interval_show(struct f_ss_opts *opts, char *page)
+{
+	int result;
+
+	mutex_lock(&opts->lock);
+	result = sprintf(page, "%d", opts->int_interval);
+	mutex_unlock(&opts->lock);
+
+	return result;
+}
+
+static ssize_t f_ss_opts_int_interval_store(struct f_ss_opts *opts,
+				       const char *page, size_t len)
+{
+	int ret;
+	u32 num;
+
+	mutex_lock(&opts->lock);
+	if (opts->refcnt) {
+		ret = -EBUSY;
+		goto end;
+	}
+
+	ret = kstrtou32(page, 0, &num);
+	if (ret)
+		goto end;
+
+	if (num > 4096) {
+		ret = -EINVAL;
+		goto end;
+	}
+
+	opts->int_interval = num;
+	ret = len;
+end:
+	mutex_unlock(&opts->lock);
+	return ret;
+}
+
+static struct f_ss_opts_attribute f_ss_opts_int_interval =
+	__CONFIGFS_ATTR(int_interval, S_IRUGO | S_IWUSR,
+			f_ss_opts_int_interval_show,
+			f_ss_opts_int_interval_store);
+
+static ssize_t f_ss_opts_int_maxpacket_show(struct f_ss_opts *opts, char *page)
+{
+	int result;
+
+	mutex_lock(&opts->lock);
+	result = sprintf(page, "%d", opts->int_maxpacket);
+	mutex_unlock(&opts->lock);
+
+	return result;
+}
+
+static ssize_t f_ss_opts_int_maxpacket_store(struct f_ss_opts *opts,
+				       const char *page, size_t len)
+{
+	int ret;
+	u16 num;
+
+	mutex_lock(&opts->lock);
+	if (opts->refcnt) {
+		ret = -EBUSY;
+		goto end;
+	}
+
+	ret = kstrtou16(page, 0, &num);
+	if (ret)
+		goto end;
+
+	if (num > 1024) {
+		ret = -EINVAL;
+		goto end;
+	}
+
+	opts->int_maxpacket = num;
+	ret = len;
+end:
+	mutex_unlock(&opts->lock);
+	return ret;
+}
+
+static struct f_ss_opts_attribute f_ss_opts_int_maxpacket =
+	__CONFIGFS_ATTR(int_maxpacket, S_IRUGO | S_IWUSR,
+			f_ss_opts_int_maxpacket_show,
+			f_ss_opts_int_maxpacket_store);
+
+static ssize_t f_ss_opts_int_mult_show(struct f_ss_opts *opts, char *page)
+{
+	int result;
+
+	mutex_lock(&opts->lock);
+	result = sprintf(page, "%d", opts->int_mult);
+	mutex_unlock(&opts->lock);
+
+	return result;
+}
+
+static ssize_t f_ss_opts_int_mult_store(struct f_ss_opts *opts,
+				       const char *page, size_t len)
+{
+	int ret;
+	u8 num;
+
+	mutex_lock(&opts->lock);
+	if (opts->refcnt) {
+		ret = -EBUSY;
+		goto end;
+	}
+
+	ret = kstrtou8(page, 0, &num);
+	if (ret)
+		goto end;
+
+	if (num > 2) {
+		ret = -EINVAL;
+		goto end;
+	}
+
+	opts->int_mult = num;
+	ret = len;
+end:
+	mutex_unlock(&opts->lock);
+	return ret;
+}
+
+static struct f_ss_opts_attribute f_ss_opts_int_mult =
+	__CONFIGFS_ATTR(int_mult, S_IRUGO | S_IWUSR,
+			f_ss_opts_int_mult_show,
+			f_ss_opts_int_mult_store);
+
+static ssize_t f_ss_opts_int_maxburst_show(struct f_ss_opts *opts, char *page)
+{
+	int result;
+
+	mutex_lock(&opts->lock);
+	result = sprintf(page, "%d", opts->int_maxburst);
+	mutex_unlock(&opts->lock);
+
+	return result;
+}
+
+static ssize_t f_ss_opts_int_maxburst_store(struct f_ss_opts *opts,
+				       const char *page, size_t len)
+{
+	int ret;
+	u8 num;
+
+	mutex_lock(&opts->lock);
+	if (opts->refcnt) {
+		ret = -EBUSY;
+		goto end;
+	}
+
+	ret = kstrtou8(page, 0, &num);
+	if (ret)
+		goto end;
+
+	if (num > 15) {
+		ret = -EINVAL;
+		goto end;
+	}
+
+	opts->int_maxburst = num;
+	ret = len;
+end:
+	mutex_unlock(&opts->lock);
+	return ret;
+}
+
+static struct f_ss_opts_attribute f_ss_opts_int_maxburst =
+	__CONFIGFS_ATTR(int_maxburst, S_IRUGO | S_IWUSR,
+			f_ss_opts_int_maxburst_show,
+			f_ss_opts_int_maxburst_store);
+
 static struct configfs_attribute *ss_attrs[] = {
 	&f_ss_opts_pattern.attr,
 	&f_ss_opts_isoc_interval.attr,
@@ -1186,6 +1651,10 @@ static struct configfs_attribute *ss_attrs[] = {
 	&f_ss_opts_isoc_mult.attr,
 	&f_ss_opts_isoc_maxburst.attr,
 	&f_ss_opts_bulk_buflen.attr,
+	&f_ss_opts_int_interval.attr,
+	&f_ss_opts_int_maxpacket.attr,
+	&f_ss_opts_int_mult.attr,
+	&f_ss_opts_int_maxburst.attr,
 	NULL,
 };
 
@@ -1215,6 +1684,8 @@ static struct usb_function_instance *source_sink_alloc_inst(void)
 	ss_opts->isoc_interval = GZERO_ISOC_INTERVAL;
 	ss_opts->isoc_maxpacket = GZERO_ISOC_MAXPACKET;
 	ss_opts->bulk_buflen = GZERO_BULK_BUFLEN;
+	ss_opts->int_interval = GZERO_INT_INTERVAL;
+	ss_opts->int_maxpacket = GZERO_INT_MAXPACKET;
 
 	config_group_init_type_name(&ss_opts->func_inst.group, "",
 				    &ss_func_type);
diff --git a/drivers/usb/gadget/function/f_uac1.c b/drivers/usb/gadget/function/f_uac1.c
index 2b4c82d84bfc..f7b203293205 100644
--- a/drivers/usb/gadget/function/f_uac1.c
+++ b/drivers/usb/gadget/function/f_uac1.c
@@ -11,24 +11,12 @@
 
 #include <linux/slab.h>
 #include <linux/kernel.h>
+#include <linux/module.h>
 #include <linux/device.h>
 #include <linux/atomic.h>
 
 #include "u_uac1.h"
 
-#define OUT_EP_MAX_PACKET_SIZE	200
-static int req_buf_size = OUT_EP_MAX_PACKET_SIZE;
-module_param(req_buf_size, int, S_IRUGO);
-MODULE_PARM_DESC(req_buf_size, "ISO OUT endpoint request buffer size");
-
-static int req_count = 256;
-module_param(req_count, int, S_IRUGO);
-MODULE_PARM_DESC(req_count, "ISO OUT endpoint request count");
-
-static int audio_buf_size = 48000;
-module_param(audio_buf_size, int, S_IRUGO);
-MODULE_PARM_DESC(audio_buf_size, "Audio buffer size");
-
 static int generic_set_cmd(struct usb_audio_control *con, u8 cmd, int value);
 static int generic_get_cmd(struct usb_audio_control *con, u8 cmd);
 
@@ -46,7 +34,7 @@ static int generic_get_cmd(struct usb_audio_control *con, u8 cmd);
 #define F_AUDIO_NUM_INTERFACES	2
 
 /* B.3.1  Standard AC Interface Descriptor */
-static struct usb_interface_descriptor ac_interface_desc __initdata = {
+static struct usb_interface_descriptor ac_interface_desc = {
 	.bLength =		USB_DT_INTERFACE_SIZE,
 	.bDescriptorType =	USB_DT_INTERFACE,
 	.bNumEndpoints =	0,
@@ -183,12 +171,12 @@ static struct usb_endpoint_descriptor as_out_ep_desc  = {
 	.bEndpointAddress =	USB_DIR_OUT,
 	.bmAttributes =		USB_ENDPOINT_SYNC_ADAPTIVE
 				| USB_ENDPOINT_XFER_ISOC,
-	.wMaxPacketSize =	__constant_cpu_to_le16(OUT_EP_MAX_PACKET_SIZE),
+	.wMaxPacketSize	=	cpu_to_le16(UAC1_OUT_EP_MAX_PACKET_SIZE),
 	.bInterval =		4,
 };
 
 /* Class-specific AS ISO OUT Endpoint Descriptor */
-static struct uac_iso_endpoint_descriptor as_iso_out_desc __initdata = {
+static struct uac_iso_endpoint_descriptor as_iso_out_desc = {
 	.bLength =		UAC_ISO_ENDPOINT_DESC_SIZE,
 	.bDescriptorType =	USB_DT_CS_ENDPOINT,
 	.bDescriptorSubtype =	UAC_EP_GENERAL,
@@ -197,7 +185,7 @@ static struct uac_iso_endpoint_descriptor as_iso_out_desc __initdata = {
 	.wLockDelay =		__constant_cpu_to_le16(1),
 };
 
-static struct usb_descriptor_header *f_audio_desc[] __initdata = {
+static struct usb_descriptor_header *f_audio_desc[] = {
 	(struct usb_descriptor_header *)&ac_interface_desc,
 	(struct usb_descriptor_header *)&ac_header_desc,
 
@@ -216,6 +204,37 @@ static struct usb_descriptor_header *f_audio_desc[] __initdata = {
 	NULL,
 };
 
+enum {
+	STR_AC_IF,
+	STR_INPUT_TERMINAL,
+	STR_INPUT_TERMINAL_CH_NAMES,
+	STR_FEAT_DESC_0,
+	STR_OUTPUT_TERMINAL,
+	STR_AS_IF_ALT0,
+	STR_AS_IF_ALT1,
+};
+
+static struct usb_string strings_uac1[] = {
+	[STR_AC_IF].s = "AC Interface",
+	[STR_INPUT_TERMINAL].s = "Input terminal",
+	[STR_INPUT_TERMINAL_CH_NAMES].s = "Channels",
+	[STR_FEAT_DESC_0].s = "Volume control & mute",
+	[STR_OUTPUT_TERMINAL].s = "Output terminal",
+	[STR_AS_IF_ALT0].s = "AS Interface",
+	[STR_AS_IF_ALT1].s = "AS Interface",
+	{ },
+};
+
+static struct usb_gadget_strings str_uac1 = {
+	.language = 0x0409,	/* en-us */
+	.strings = strings_uac1,
+};
+
+static struct usb_gadget_strings *uac1_strings[] = {
+	&str_uac1,
+	NULL,
+};
+
 /*
  * This function is an ALSA sound card following USB Audio Class Spec 1.0.
  */
@@ -300,8 +319,14 @@ static int f_audio_out_ep_complete(struct usb_ep *ep, struct usb_request *req)
 	struct f_audio *audio = req->context;
 	struct usb_composite_dev *cdev = audio->card.func.config->cdev;
 	struct f_audio_buf *copy_buf = audio->copy_buf;
+	struct f_uac1_opts *opts;
+	int audio_buf_size;
 	int err;
 
+	opts = container_of(audio->card.func.fi, struct f_uac1_opts,
+			    func_inst);
+	audio_buf_size = opts->audio_buf_size;
+
 	if (!copy_buf)
 		return -EINVAL;
 
@@ -546,10 +571,17 @@ static int f_audio_set_alt(struct usb_function *f, unsigned intf, unsigned alt)
 	struct usb_composite_dev *cdev = f->config->cdev;
 	struct usb_ep *out_ep = audio->out_ep;
 	struct usb_request *req;
+	struct f_uac1_opts *opts;
+	int req_buf_size, req_count, audio_buf_size;
 	int i = 0, err = 0;
 
 	DBG(cdev, "intf %d, alt %d\n", intf, alt);
 
+	opts = container_of(f->fi, struct f_uac1_opts, func_inst);
+	req_buf_size = opts->req_buf_size;
+	req_count = opts->req_count;
+	audio_buf_size = opts->audio_buf_size;
+
 	if (intf == 1) {
 		if (alt == 1) {
 			usb_ep_enable(out_ep);
@@ -625,13 +657,37 @@ static void f_audio_build_desc(struct f_audio *audio)
 }
 
 /* audio function driver setup/binding */
-static int __init
+static int
 f_audio_bind(struct usb_configuration *c, struct usb_function *f)
 {
 	struct usb_composite_dev *cdev = c->cdev;
 	struct f_audio		*audio = func_to_audio(f);
+	struct usb_string	*us;
 	int			status;
 	struct usb_ep		*ep = NULL;
+	struct f_uac1_opts	*audio_opts;
+
+	audio_opts = container_of(f->fi, struct f_uac1_opts, func_inst);
+	audio->card.gadget = c->cdev->gadget;
+	audio_opts->card = &audio->card;
+	/* set up ASLA audio devices */
+	if (!audio_opts->bound) {
+		status = gaudio_setup(&audio->card);
+		if (status < 0)
+			return status;
+		audio_opts->bound = true;
+	}
+	us = usb_gstrings_attach(cdev, uac1_strings, ARRAY_SIZE(strings_uac1));
+	if (IS_ERR(us))
+		return PTR_ERR(us);
+	ac_interface_desc.iInterface = us[STR_AC_IF].id;
+	input_terminal_desc.iTerminal = us[STR_INPUT_TERMINAL].id;
+	input_terminal_desc.iChannelNames = us[STR_INPUT_TERMINAL_CH_NAMES].id;
+	feature_unit_desc.iFeature = us[STR_FEAT_DESC_0].id;
+	output_terminal_desc.iTerminal = us[STR_OUTPUT_TERMINAL].id;
+	as_interface_alt_0_desc.iInterface = us[STR_AS_IF_ALT0].id;
+	as_interface_alt_1_desc.iInterface = us[STR_AS_IF_ALT1].id;
+
 
 	f_audio_build_desc(audio);
 
@@ -666,20 +722,12 @@ f_audio_bind(struct usb_configuration *c, struct usb_function *f)
 	return 0;
 
 fail:
+	gaudio_cleanup(&audio->card);
 	if (ep)
 		ep->driver_data = NULL;
 	return status;
 }
 
-static void
-f_audio_unbind(struct usb_configuration *c, struct usb_function *f)
-{
-	struct f_audio		*audio = func_to_audio(f);
-
-	usb_free_all_descriptors(f);
-	kfree(audio);
-}
-
 /*-------------------------------------------------------------------------*/
 
 static int generic_set_cmd(struct usb_audio_control *con, u8 cmd, int value)
@@ -695,7 +743,7 @@ static int generic_get_cmd(struct usb_audio_control *con, u8 cmd)
 }
 
 /* Todo: add more control selecotor dynamically */
-static int __init control_selector_init(struct f_audio *audio)
+static int control_selector_init(struct f_audio *audio)
 {
 	INIT_LIST_HEAD(&audio->cs);
 	list_add(&feature_unit.list, &audio->cs);
@@ -712,57 +760,226 @@ static int __init control_selector_init(struct f_audio *audio)
 	return 0;
 }
 
-/**
- * audio_bind_config - add USB audio function to a configuration
- * @c: the configuration to supcard the USB audio function
- * Context: single threaded during gadget setup
- *
- * Returns zero on success, else negative errno.
- */
-static int __init audio_bind_config(struct usb_configuration *c)
+static inline struct f_uac1_opts *to_f_uac1_opts(struct config_item *item)
+{
+	return container_of(to_config_group(item), struct f_uac1_opts,
+			    func_inst.group);
+}
+
+CONFIGFS_ATTR_STRUCT(f_uac1_opts);
+CONFIGFS_ATTR_OPS(f_uac1_opts);
+
+static void f_uac1_attr_release(struct config_item *item)
+{
+	struct f_uac1_opts *opts = to_f_uac1_opts(item);
+
+	usb_put_function_instance(&opts->func_inst);
+}
+
+static struct configfs_item_operations f_uac1_item_ops = {
+	.release	= f_uac1_attr_release,
+	.show_attribute	= f_uac1_opts_attr_show,
+	.store_attribute = f_uac1_opts_attr_store,
+};
+
+#define UAC1_INT_ATTRIBUTE(name)					\
+static ssize_t f_uac1_opts_##name##_show(struct f_uac1_opts *opts,	\
+					 char *page)			\
+{									\
+	int result;							\
+									\
+	mutex_lock(&opts->lock);					\
+	result = sprintf(page, "%u\n", opts->name);			\
+	mutex_unlock(&opts->lock);					\
+									\
+	return result;							\
+}									\
+									\
+static ssize_t f_uac1_opts_##name##_store(struct f_uac1_opts *opts,	\
+					  const char *page, size_t len)	\
+{									\
+	int ret;							\
+	u32 num;							\
+									\
+	mutex_lock(&opts->lock);					\
+	if (opts->refcnt) {						\
+		ret = -EBUSY;						\
+		goto end;						\
+	}								\
+									\
+	ret = kstrtou32(page, 0, &num);					\
+	if (ret)							\
+		goto end;						\
+									\
+	opts->name = num;						\
+	ret = len;							\
+									\
+end:									\
+	mutex_unlock(&opts->lock);					\
+	return ret;							\
+}									\
+									\
+static struct f_uac1_opts_attribute f_uac1_opts_##name =		\
+	__CONFIGFS_ATTR(name, S_IRUGO | S_IWUSR,			\
+			f_uac1_opts_##name##_show,			\
+			f_uac1_opts_##name##_store)
+
+UAC1_INT_ATTRIBUTE(req_buf_size);
+UAC1_INT_ATTRIBUTE(req_count);
+UAC1_INT_ATTRIBUTE(audio_buf_size);
+
+#define UAC1_STR_ATTRIBUTE(name)					\
+static ssize_t f_uac1_opts_##name##_show(struct f_uac1_opts *opts,	\
+					 char *page)			\
+{									\
+	int result;							\
+									\
+	mutex_lock(&opts->lock);					\
+	result = sprintf(page, "%s\n", opts->name);			\
+	mutex_unlock(&opts->lock);					\
+									\
+	return result;							\
+}									\
+									\
+static ssize_t f_uac1_opts_##name##_store(struct f_uac1_opts *opts,	\
+					  const char *page, size_t len)	\
+{									\
+	int ret = -EBUSY;						\
+	char *tmp;							\
+									\
+	mutex_lock(&opts->lock);					\
+	if (opts->refcnt)						\
+		goto end;						\
+									\
+	tmp = kstrndup(page, len, GFP_KERNEL);				\
+	if (tmp) {							\
+		ret = -ENOMEM;						\
+		goto end;						\
+	}								\
+	if (opts->name##_alloc)						\
+		kfree(opts->name);					\
+	opts->name##_alloc = true;					\
+	opts->name = tmp;						\
+	ret = len;							\
+									\
+end:									\
+	mutex_unlock(&opts->lock);					\
+	return ret;							\
+}									\
+									\
+static struct f_uac1_opts_attribute f_uac1_opts_##name =		\
+	__CONFIGFS_ATTR(name, S_IRUGO | S_IWUSR,			\
+			f_uac1_opts_##name##_show,			\
+			f_uac1_opts_##name##_store)
+
+UAC1_STR_ATTRIBUTE(fn_play);
+UAC1_STR_ATTRIBUTE(fn_cap);
+UAC1_STR_ATTRIBUTE(fn_cntl);
+
+static struct configfs_attribute *f_uac1_attrs[] = {
+	&f_uac1_opts_req_buf_size.attr,
+	&f_uac1_opts_req_count.attr,
+	&f_uac1_opts_audio_buf_size.attr,
+	&f_uac1_opts_fn_play.attr,
+	&f_uac1_opts_fn_cap.attr,
+	&f_uac1_opts_fn_cntl.attr,
+	NULL,
+};
+
+static struct config_item_type f_uac1_func_type = {
+	.ct_item_ops	= &f_uac1_item_ops,
+	.ct_attrs	= f_uac1_attrs,
+	.ct_owner	= THIS_MODULE,
+};
+
+static void f_audio_free_inst(struct usb_function_instance *f)
+{
+	struct f_uac1_opts *opts;
+
+	opts = container_of(f, struct f_uac1_opts, func_inst);
+	gaudio_cleanup(opts->card);
+	if (opts->fn_play_alloc)
+		kfree(opts->fn_play);
+	if (opts->fn_cap_alloc)
+		kfree(opts->fn_cap);
+	if (opts->fn_cntl_alloc)
+		kfree(opts->fn_cntl);
+	kfree(opts);
+}
+
+static struct usb_function_instance *f_audio_alloc_inst(void)
+{
+	struct f_uac1_opts *opts;
+
+	opts = kzalloc(sizeof(*opts), GFP_KERNEL);
+	if (!opts)
+		return ERR_PTR(-ENOMEM);
+
+	mutex_init(&opts->lock);
+	opts->func_inst.free_func_inst = f_audio_free_inst;
+
+	config_group_init_type_name(&opts->func_inst.group, "",
+				    &f_uac1_func_type);
+
+	opts->req_buf_size = UAC1_OUT_EP_MAX_PACKET_SIZE;
+	opts->req_count = UAC1_REQ_COUNT;
+	opts->audio_buf_size = UAC1_AUDIO_BUF_SIZE;
+	opts->fn_play = FILE_PCM_PLAYBACK;
+	opts->fn_cap = FILE_PCM_CAPTURE;
+	opts->fn_cntl = FILE_CONTROL;
+	return &opts->func_inst;
+}
+
+static void f_audio_free(struct usb_function *f)
+{
+	struct f_audio *audio = func_to_audio(f);
+	struct f_uac1_opts *opts;
+
+	opts = container_of(f->fi, struct f_uac1_opts, func_inst);
+	kfree(audio);
+	mutex_lock(&opts->lock);
+	--opts->refcnt;
+	mutex_unlock(&opts->lock);
+}
+
+static void f_audio_unbind(struct usb_configuration *c, struct usb_function *f)
+{
+	usb_free_all_descriptors(f);
+}
+
+static struct usb_function *f_audio_alloc(struct usb_function_instance *fi)
 {
 	struct f_audio *audio;
-	int status;
+	struct f_uac1_opts *opts;
 
 	/* allocate and initialize one new instance */
-	audio = kzalloc(sizeof *audio, GFP_KERNEL);
+	audio = kzalloc(sizeof(*audio), GFP_KERNEL);
 	if (!audio)
-		return -ENOMEM;
+		return ERR_PTR(-ENOMEM);
 
 	audio->card.func.name = "g_audio";
-	audio->card.gadget = c->cdev->gadget;
 
+	opts = container_of(fi, struct f_uac1_opts, func_inst);
+	mutex_lock(&opts->lock);
+	++opts->refcnt;
+	mutex_unlock(&opts->lock);
 	INIT_LIST_HEAD(&audio->play_queue);
 	spin_lock_init(&audio->lock);
 
-	/* set up ASLA audio devices */
-	status = gaudio_setup(&audio->card);
-	if (status < 0)
-		goto setup_fail;
-
-	audio->card.func.strings = audio_strings;
 	audio->card.func.bind = f_audio_bind;
 	audio->card.func.unbind = f_audio_unbind;
 	audio->card.func.set_alt = f_audio_set_alt;
 	audio->card.func.setup = f_audio_setup;
 	audio->card.func.disable = f_audio_disable;
+	audio->card.func.free_func = f_audio_free;
 
 	control_selector_init(audio);
 
 	INIT_WORK(&audio->playback_work, f_audio_playback_work);
 
-	status = usb_add_function(c, &audio->card.func);
-	if (status)
-		goto add_fail;
-
-	INFO(c->cdev, "audio_buf_size %d, req_buf_size %d, req_count %d\n",
-		audio_buf_size, req_buf_size, req_count);
-
-	return status;
-
-add_fail:
-	gaudio_cleanup();
-setup_fail:
-	kfree(audio);
-	return status;
+	return &audio->card.func;
 }
+
+DECLARE_USB_FUNCTION_INIT(uac1, f_audio_alloc_inst, f_audio_alloc);
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Bryan Wu");
diff --git a/drivers/usb/gadget/function/f_uac2.c b/drivers/usb/gadget/function/f_uac2.c
index 3ed89ecc8d6d..a5a27a504d67 100644
--- a/drivers/usb/gadget/function/f_uac2.c
+++ b/drivers/usb/gadget/function/f_uac2.c
@@ -20,35 +20,7 @@
 #include <sound/pcm.h>
 #include <sound/pcm_params.h>
 
-/* Playback(USB-IN) Default Stereo - Fl/Fr */
-static int p_chmask = 0x3;
-module_param(p_chmask, uint, S_IRUGO);
-MODULE_PARM_DESC(p_chmask, "Playback Channel Mask");
-
-/* Playback Default 48 KHz */
-static int p_srate = 48000;
-module_param(p_srate, uint, S_IRUGO);
-MODULE_PARM_DESC(p_srate, "Playback Sampling Rate");
-
-/* Playback Default 16bits/sample */
-static int p_ssize = 2;
-module_param(p_ssize, uint, S_IRUGO);
-MODULE_PARM_DESC(p_ssize, "Playback Sample Size(bytes)");
-
-/* Capture(USB-OUT) Default Stereo - Fl/Fr */
-static int c_chmask = 0x3;
-module_param(c_chmask, uint, S_IRUGO);
-MODULE_PARM_DESC(c_chmask, "Capture Channel Mask");
-
-/* Capture Default 64 KHz */
-static int c_srate = 64000;
-module_param(c_srate, uint, S_IRUGO);
-MODULE_PARM_DESC(c_srate, "Capture Sampling Rate");
-
-/* Capture Default 16bits/sample */
-static int c_ssize = 2;
-module_param(c_ssize, uint, S_IRUGO);
-MODULE_PARM_DESC(c_ssize, "Capture Sample Size(bytes)");
+#include "u_uac2.h"
 
 /* Keep everyone on toes */
 #define USB_XFERS	2
@@ -120,6 +92,15 @@ struct snd_uac2_chip {
 
 	struct snd_card *card;
 	struct snd_pcm *pcm;
+
+	/* timekeeping for the playback endpoint */
+	unsigned int p_interval;
+	unsigned int p_residue;
+
+	/* pre-calculated values for playback iso completion */
+	unsigned int p_pktsize;
+	unsigned int p_pktsize_residue;
+	unsigned int p_framesize;
 };
 
 #define BUFF_SIZE_MAX	(PAGE_SIZE * 16)
@@ -149,8 +130,6 @@ struct audio_dev {
 	struct snd_uac2_chip uac2;
 };
 
-static struct audio_dev *agdev_g;
-
 static inline
 struct audio_dev *func_to_agdev(struct usb_function *f)
 {
@@ -170,6 +149,12 @@ struct snd_uac2_chip *pdev_to_uac2(struct platform_device *p)
 }
 
 static inline
+struct f_uac2_opts *agdev_to_uac2_opts(struct audio_dev *agdev)
+{
+	return container_of(agdev->func.fi, struct f_uac2_opts, func_inst);
+}
+
+static inline
 uint num_channels(uint chanmask)
 {
 	uint num = 0;
@@ -187,8 +172,8 @@ agdev_iso_complete(struct usb_ep *ep, struct usb_request *req)
 {
 	unsigned pending;
 	unsigned long flags;
+	unsigned int hw_ptr;
 	bool update_alsa = false;
-	unsigned char *src, *dst;
 	int status = req->status;
 	struct uac2_req *ur = req->context;
 	struct snd_pcm_substream *substream;
@@ -216,12 +201,27 @@ agdev_iso_complete(struct usb_ep *ep, struct usb_request *req)
 	spin_lock_irqsave(&prm->lock, flags);
 
 	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
-		src = prm->dma_area + prm->hw_ptr;
+		/*
+		 * For each IN packet, take the quotient of the current data
+		 * rate and the endpoint's interval as the base packet size.
+		 * If there is a residue from this division, add it to the
+		 * residue accumulator.
+		 */
+		req->length = uac2->p_pktsize;
+		uac2->p_residue += uac2->p_pktsize_residue;
+
+		/*
+		 * Whenever there are more bytes in the accumulator than we
+		 * need to add one more sample frame, increase this packet's
+		 * size and decrease the accumulator.
+		 */
+		if (uac2->p_residue / uac2->p_interval >= uac2->p_framesize) {
+			req->length += uac2->p_framesize;
+			uac2->p_residue -= uac2->p_framesize *
+					   uac2->p_interval;
+		}
+
 		req->actual = req->length;
-		dst = req->buf;
-	} else {
-		dst = prm->dma_area + prm->hw_ptr;
-		src = req->buf;
 	}
 
 	pending = prm->hw_ptr % prm->period_size;
@@ -229,12 +229,32 @@ agdev_iso_complete(struct usb_ep *ep, struct usb_request *req)
 	if (pending >= prm->period_size)
 		update_alsa = true;
 
+	hw_ptr = prm->hw_ptr;
 	prm->hw_ptr = (prm->hw_ptr + req->actual) % prm->dma_bytes;
 
 	spin_unlock_irqrestore(&prm->lock, flags);
 
 	/* Pack USB load in ALSA ring buffer */
-	memcpy(dst, src, req->actual);
+	pending = prm->dma_bytes - hw_ptr;
+
+	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
+		if (unlikely(pending < req->actual)) {
+			memcpy(req->buf, prm->dma_area + hw_ptr, pending);
+			memcpy(req->buf + pending, prm->dma_area,
+			       req->actual - pending);
+		} else {
+			memcpy(req->buf, prm->dma_area + hw_ptr, req->actual);
+		}
+	} else {
+		if (unlikely(pending < req->actual)) {
+			memcpy(prm->dma_area + hw_ptr, req->buf, pending);
+			memcpy(prm->dma_area, req->buf + pending,
+			       req->actual - pending);
+		} else {
+			memcpy(prm->dma_area + hw_ptr, req->buf, req->actual);
+		}
+	}
+
 exit:
 	if (usb_ep_queue(ep, req, GFP_ATOMIC))
 		dev_err(&uac2->pdev.dev, "%d Error!\n", __LINE__);
@@ -342,6 +362,21 @@ static int uac2_pcm_open(struct snd_pcm_substream *substream)
 {
 	struct snd_uac2_chip *uac2 = snd_pcm_substream_chip(substream);
 	struct snd_pcm_runtime *runtime = substream->runtime;
+	struct audio_dev *audio_dev;
+	struct f_uac2_opts *opts;
+	int p_ssize, c_ssize;
+	int p_srate, c_srate;
+	int p_chmask, c_chmask;
+
+	audio_dev = uac2_to_agdev(uac2);
+	opts = container_of(audio_dev->func.fi, struct f_uac2_opts, func_inst);
+	p_ssize = opts->p_ssize;
+	c_ssize = opts->c_ssize;
+	p_srate = opts->p_srate;
+	c_srate = opts->c_srate;
+	p_chmask = opts->p_chmask;
+	c_chmask = opts->c_chmask;
+	uac2->p_residue = 0;
 
 	runtime->hw = uac2_pcm_hardware;
 
@@ -411,7 +446,15 @@ static int snd_uac2_probe(struct platform_device *pdev)
 	struct snd_uac2_chip *uac2 = pdev_to_uac2(pdev);
 	struct snd_card *card;
 	struct snd_pcm *pcm;
+	struct audio_dev *audio_dev;
+	struct f_uac2_opts *opts;
 	int err;
+	int p_chmask, c_chmask;
+
+	audio_dev = uac2_to_agdev(uac2);
+	opts = container_of(audio_dev->func.fi, struct f_uac2_opts, func_inst);
+	p_chmask = opts->p_chmask;
+	c_chmask = opts->c_chmask;
 
 	/* Choose any slot, with no id */
 	err = snd_card_new(&pdev->dev, -1, NULL, THIS_MODULE, 0, &card);
@@ -919,20 +962,58 @@ free_ep(struct uac2_rtd_params *prm, struct usb_ep *ep)
 			"%s:%d Error!\n", __func__, __LINE__);
 }
 
-static int __init
+static int
 afunc_bind(struct usb_configuration *cfg, struct usb_function *fn)
 {
 	struct audio_dev *agdev = func_to_agdev(fn);
 	struct snd_uac2_chip *uac2 = &agdev->uac2;
 	struct usb_composite_dev *cdev = cfg->cdev;
 	struct usb_gadget *gadget = cdev->gadget;
+	struct device *dev = &uac2->pdev.dev;
 	struct uac2_rtd_params *prm;
+	struct f_uac2_opts *uac2_opts;
+	struct usb_string *us;
 	int ret;
 
+	uac2_opts = container_of(fn->fi, struct f_uac2_opts, func_inst);
+
+	us = usb_gstrings_attach(cdev, fn_strings, ARRAY_SIZE(strings_fn));
+	if (IS_ERR(us))
+		return PTR_ERR(us);
+	iad_desc.iFunction = us[STR_ASSOC].id;
+	std_ac_if_desc.iInterface = us[STR_IF_CTRL].id;
+	in_clk_src_desc.iClockSource = us[STR_CLKSRC_IN].id;
+	out_clk_src_desc.iClockSource = us[STR_CLKSRC_OUT].id;
+	usb_out_it_desc.iTerminal = us[STR_USB_IT].id;
+	io_in_it_desc.iTerminal = us[STR_IO_IT].id;
+	usb_in_ot_desc.iTerminal = us[STR_USB_OT].id;
+	io_out_ot_desc.iTerminal = us[STR_IO_OT].id;
+	std_as_out_if0_desc.iInterface = us[STR_AS_OUT_ALT0].id;
+	std_as_out_if1_desc.iInterface = us[STR_AS_OUT_ALT1].id;
+	std_as_in_if0_desc.iInterface = us[STR_AS_IN_ALT0].id;
+	std_as_in_if1_desc.iInterface = us[STR_AS_IN_ALT1].id;
+
+
+	/* Initialize the configurable parameters */
+	usb_out_it_desc.bNrChannels = num_channels(uac2_opts->c_chmask);
+	usb_out_it_desc.bmChannelConfig = cpu_to_le32(uac2_opts->c_chmask);
+	io_in_it_desc.bNrChannels = num_channels(uac2_opts->p_chmask);
+	io_in_it_desc.bmChannelConfig = cpu_to_le32(uac2_opts->p_chmask);
+	as_out_hdr_desc.bNrChannels = num_channels(uac2_opts->c_chmask);
+	as_out_hdr_desc.bmChannelConfig = cpu_to_le32(uac2_opts->c_chmask);
+	as_in_hdr_desc.bNrChannels = num_channels(uac2_opts->p_chmask);
+	as_in_hdr_desc.bmChannelConfig = cpu_to_le32(uac2_opts->p_chmask);
+	as_out_fmt1_desc.bSubslotSize = uac2_opts->c_ssize;
+	as_out_fmt1_desc.bBitResolution = uac2_opts->c_ssize * 8;
+	as_in_fmt1_desc.bSubslotSize = uac2_opts->p_ssize;
+	as_in_fmt1_desc.bBitResolution = uac2_opts->p_ssize * 8;
+
+	snprintf(clksrc_in, sizeof(clksrc_in), "%uHz", uac2_opts->p_srate);
+	snprintf(clksrc_out, sizeof(clksrc_out), "%uHz", uac2_opts->c_srate);
+
 	ret = usb_interface_id(cfg, fn);
 	if (ret < 0) {
-		dev_err(&uac2->pdev.dev,
-			"%s:%d Error!\n", __func__, __LINE__);
+		dev_err(dev, "%s:%d Error!\n", __func__, __LINE__);
 		return ret;
 	}
 	std_ac_if_desc.bInterfaceNumber = ret;
@@ -941,8 +1022,7 @@ afunc_bind(struct usb_configuration *cfg, struct usb_function *fn)
 
 	ret = usb_interface_id(cfg, fn);
 	if (ret < 0) {
-		dev_err(&uac2->pdev.dev,
-			"%s:%d Error!\n", __func__, __LINE__);
+		dev_err(dev, "%s:%d Error!\n", __func__, __LINE__);
 		return ret;
 	}
 	std_as_out_if0_desc.bInterfaceNumber = ret;
@@ -952,8 +1032,7 @@ afunc_bind(struct usb_configuration *cfg, struct usb_function *fn)
 
 	ret = usb_interface_id(cfg, fn);
 	if (ret < 0) {
-		dev_err(&uac2->pdev.dev,
-			"%s:%d Error!\n", __func__, __LINE__);
+		dev_err(dev, "%s:%d Error!\n", __func__, __LINE__);
 		return ret;
 	}
 	std_as_in_if0_desc.bInterfaceNumber = ret;
@@ -963,16 +1042,14 @@ afunc_bind(struct usb_configuration *cfg, struct usb_function *fn)
 
 	agdev->out_ep = usb_ep_autoconfig(gadget, &fs_epout_desc);
 	if (!agdev->out_ep) {
-		dev_err(&uac2->pdev.dev,
-			"%s:%d Error!\n", __func__, __LINE__);
+		dev_err(dev, "%s:%d Error!\n", __func__, __LINE__);
 		goto err;
 	}
 	agdev->out_ep->driver_data = agdev;
 
 	agdev->in_ep = usb_ep_autoconfig(gadget, &fs_epin_desc);
 	if (!agdev->in_ep) {
-		dev_err(&uac2->pdev.dev,
-			"%s:%d Error!\n", __func__, __LINE__);
+		dev_err(dev, "%s:%d Error!\n", __func__, __LINE__);
 		goto err;
 	}
 	agdev->in_ep->driver_data = agdev;
@@ -1020,27 +1097,6 @@ err:
 	return -EINVAL;
 }
 
-static void
-afunc_unbind(struct usb_configuration *cfg, struct usb_function *fn)
-{
-	struct audio_dev *agdev = func_to_agdev(fn);
-	struct uac2_rtd_params *prm;
-
-	alsa_uac2_exit(agdev);
-
-	prm = &agdev->uac2.p_prm;
-	kfree(prm->rbuf);
-
-	prm = &agdev->uac2.c_prm;
-	kfree(prm->rbuf);
-	usb_free_all_descriptors(fn);
-
-	if (agdev->in_ep)
-		agdev->in_ep->driver_data = NULL;
-	if (agdev->out_ep)
-		agdev->out_ep->driver_data = NULL;
-}
-
 static int
 afunc_set_alt(struct usb_function *fn, unsigned intf, unsigned alt)
 {
@@ -1048,23 +1104,22 @@ afunc_set_alt(struct usb_function *fn, unsigned intf, unsigned alt)
 	struct audio_dev *agdev = func_to_agdev(fn);
 	struct snd_uac2_chip *uac2 = &agdev->uac2;
 	struct usb_gadget *gadget = cdev->gadget;
+	struct device *dev = &uac2->pdev.dev;
 	struct usb_request *req;
 	struct usb_ep *ep;
 	struct uac2_rtd_params *prm;
-	int i;
+	int req_len, i;
 
 	/* No i/f has more than 2 alt settings */
 	if (alt > 1) {
-		dev_err(&uac2->pdev.dev,
-			"%s:%d Error!\n", __func__, __LINE__);
+		dev_err(dev, "%s:%d Error!\n", __func__, __LINE__);
 		return -EINVAL;
 	}
 
 	if (intf == agdev->ac_intf) {
 		/* Control I/f has only 1 AltSetting - 0 */
 		if (alt) {
-			dev_err(&uac2->pdev.dev,
-				"%s:%d Error!\n", __func__, __LINE__);
+			dev_err(dev, "%s:%d Error!\n", __func__, __LINE__);
 			return -EINVAL;
 		}
 		return 0;
@@ -1075,14 +1130,43 @@ afunc_set_alt(struct usb_function *fn, unsigned intf, unsigned alt)
 		prm = &uac2->c_prm;
 		config_ep_by_speed(gadget, fn, ep);
 		agdev->as_out_alt = alt;
+		req_len = prm->max_psize;
 	} else if (intf == agdev->as_in_intf) {
+		struct f_uac2_opts *opts = agdev_to_uac2_opts(agdev);
+		unsigned int factor, rate;
+		struct usb_endpoint_descriptor *ep_desc;
+
 		ep = agdev->in_ep;
 		prm = &uac2->p_prm;
 		config_ep_by_speed(gadget, fn, ep);
 		agdev->as_in_alt = alt;
+
+		/* pre-calculate the playback endpoint's interval */
+		if (gadget->speed == USB_SPEED_FULL) {
+			ep_desc = &fs_epin_desc;
+			factor = 1000;
+		} else {
+			ep_desc = &hs_epin_desc;
+			factor = 125;
+		}
+
+		/* pre-compute some values for iso_complete() */
+		uac2->p_framesize = opts->p_ssize *
+				    num_channels(opts->p_chmask);
+		rate = opts->p_srate * uac2->p_framesize;
+		uac2->p_interval = (1 << (ep_desc->bInterval - 1)) * factor;
+		uac2->p_pktsize = min_t(unsigned int, rate / uac2->p_interval,
+					prm->max_psize);
+
+		if (uac2->p_pktsize < prm->max_psize)
+			uac2->p_pktsize_residue = rate % uac2->p_interval;
+		else
+			uac2->p_pktsize_residue = 0;
+
+		req_len = uac2->p_pktsize;
+		uac2->p_residue = 0;
 	} else {
-		dev_err(&uac2->pdev.dev,
-			"%s:%d Error!\n", __func__, __LINE__);
+		dev_err(dev, "%s:%d Error!\n", __func__, __LINE__);
 		return -EINVAL;
 	}
 
@@ -1095,31 +1179,23 @@ afunc_set_alt(struct usb_function *fn, unsigned intf, unsigned alt)
 	usb_ep_enable(ep);
 
 	for (i = 0; i < USB_XFERS; i++) {
-		if (prm->ureq[i].req) {
-			if (usb_ep_queue(ep, prm->ureq[i].req, GFP_ATOMIC))
-				dev_err(&uac2->pdev.dev, "%d Error!\n",
-					__LINE__);
-			continue;
-		}
-
-		req = usb_ep_alloc_request(ep, GFP_ATOMIC);
-		if (req == NULL) {
-			dev_err(&uac2->pdev.dev,
-				"%s:%d Error!\n", __func__, __LINE__);
-			return -EINVAL;
+		if (!prm->ureq[i].req) {
+			req = usb_ep_alloc_request(ep, GFP_ATOMIC);
+			if (req == NULL)
+				return -ENOMEM;
+
+			prm->ureq[i].req = req;
+			prm->ureq[i].pp = prm;
+
+			req->zero = 0;
+			req->context = &prm->ureq[i];
+			req->length = req_len;
+			req->complete = agdev_iso_complete;
+			req->buf = prm->rbuf + i * prm->max_psize;
 		}
 
-		prm->ureq[i].req = req;
-		prm->ureq[i].pp = prm;
-
-		req->zero = 0;
-		req->context = &prm->ureq[i];
-		req->length = prm->max_psize;
-		req->complete =	agdev_iso_complete;
-		req->buf = prm->rbuf + i * req->length;
-
-		if (usb_ep_queue(ep, req, GFP_ATOMIC))
-			dev_err(&uac2->pdev.dev, "%d Error!\n", __LINE__);
+		if (usb_ep_queue(ep, prm->ureq[i].req, GFP_ATOMIC))
+			dev_err(dev, "%s:%d Error!\n", __func__, __LINE__);
 	}
 
 	return 0;
@@ -1164,12 +1240,18 @@ in_rq_cur(struct usb_function *fn, const struct usb_ctrlrequest *cr)
 	struct usb_request *req = fn->config->cdev->req;
 	struct audio_dev *agdev = func_to_agdev(fn);
 	struct snd_uac2_chip *uac2 = &agdev->uac2;
+	struct f_uac2_opts *opts;
 	u16 w_length = le16_to_cpu(cr->wLength);
 	u16 w_index = le16_to_cpu(cr->wIndex);
 	u16 w_value = le16_to_cpu(cr->wValue);
 	u8 entity_id = (w_index >> 8) & 0xff;
 	u8 control_selector = w_value >> 8;
 	int value = -EOPNOTSUPP;
+	int p_srate, c_srate;
+
+	opts = agdev_to_uac2_opts(agdev);
+	p_srate = opts->p_srate;
+	c_srate = opts->c_srate;
 
 	if (control_selector == UAC2_CS_CONTROL_SAM_FREQ) {
 		struct cntrl_cur_lay3 c;
@@ -1199,6 +1281,7 @@ in_rq_range(struct usb_function *fn, const struct usb_ctrlrequest *cr)
 	struct usb_request *req = fn->config->cdev->req;
 	struct audio_dev *agdev = func_to_agdev(fn);
 	struct snd_uac2_chip *uac2 = &agdev->uac2;
+	struct f_uac2_opts *opts;
 	u16 w_length = le16_to_cpu(cr->wLength);
 	u16 w_index = le16_to_cpu(cr->wIndex);
 	u16 w_value = le16_to_cpu(cr->wValue);
@@ -1206,6 +1289,11 @@ in_rq_range(struct usb_function *fn, const struct usb_ctrlrequest *cr)
 	u8 control_selector = w_value >> 8;
 	struct cntrl_range_lay3 r;
 	int value = -EOPNOTSUPP;
+	int p_srate, c_srate;
+
+	opts = agdev_to_uac2_opts(agdev);
+	p_srate = opts->p_srate;
+	c_srate = opts->c_srate;
 
 	if (control_selector == UAC2_CS_CONTROL_SAM_FREQ) {
 		if (entity_id == USB_IN_CLK_ID)
@@ -1309,66 +1397,184 @@ afunc_setup(struct usb_function *fn, const struct usb_ctrlrequest *cr)
 	return value;
 }
 
-static int audio_bind_config(struct usb_configuration *cfg)
+static inline struct f_uac2_opts *to_f_uac2_opts(struct config_item *item)
 {
-	int res;
-
-	agdev_g = kzalloc(sizeof *agdev_g, GFP_KERNEL);
-	if (agdev_g == NULL)
-		return -ENOMEM;
-
-	res = usb_string_ids_tab(cfg->cdev, strings_fn);
-	if (res)
-		return res;
-	iad_desc.iFunction = strings_fn[STR_ASSOC].id;
-	std_ac_if_desc.iInterface = strings_fn[STR_IF_CTRL].id;
-	in_clk_src_desc.iClockSource = strings_fn[STR_CLKSRC_IN].id;
-	out_clk_src_desc.iClockSource = strings_fn[STR_CLKSRC_OUT].id;
-	usb_out_it_desc.iTerminal = strings_fn[STR_USB_IT].id;
-	io_in_it_desc.iTerminal = strings_fn[STR_IO_IT].id;
-	usb_in_ot_desc.iTerminal = strings_fn[STR_USB_OT].id;
-	io_out_ot_desc.iTerminal = strings_fn[STR_IO_OT].id;
-	std_as_out_if0_desc.iInterface = strings_fn[STR_AS_OUT_ALT0].id;
-	std_as_out_if1_desc.iInterface = strings_fn[STR_AS_OUT_ALT1].id;
-	std_as_in_if0_desc.iInterface = strings_fn[STR_AS_IN_ALT0].id;
-	std_as_in_if1_desc.iInterface = strings_fn[STR_AS_IN_ALT1].id;
-
-	agdev_g->func.name = "uac2_func";
-	agdev_g->func.strings = fn_strings;
-	agdev_g->func.bind = afunc_bind;
-	agdev_g->func.unbind = afunc_unbind;
-	agdev_g->func.set_alt = afunc_set_alt;
-	agdev_g->func.get_alt = afunc_get_alt;
-	agdev_g->func.disable = afunc_disable;
-	agdev_g->func.setup = afunc_setup;
+	return container_of(to_config_group(item), struct f_uac2_opts,
+			    func_inst.group);
+}
 
-	/* Initialize the configurable parameters */
-	usb_out_it_desc.bNrChannels = num_channels(c_chmask);
-	usb_out_it_desc.bmChannelConfig = cpu_to_le32(c_chmask);
-	io_in_it_desc.bNrChannels = num_channels(p_chmask);
-	io_in_it_desc.bmChannelConfig = cpu_to_le32(p_chmask);
-	as_out_hdr_desc.bNrChannels = num_channels(c_chmask);
-	as_out_hdr_desc.bmChannelConfig = cpu_to_le32(c_chmask);
-	as_in_hdr_desc.bNrChannels = num_channels(p_chmask);
-	as_in_hdr_desc.bmChannelConfig = cpu_to_le32(p_chmask);
-	as_out_fmt1_desc.bSubslotSize = c_ssize;
-	as_out_fmt1_desc.bBitResolution = c_ssize * 8;
-	as_in_fmt1_desc.bSubslotSize = p_ssize;
-	as_in_fmt1_desc.bBitResolution = p_ssize * 8;
-
-	snprintf(clksrc_in, sizeof(clksrc_in), "%uHz", p_srate);
-	snprintf(clksrc_out, sizeof(clksrc_out), "%uHz", c_srate);
-
-	res = usb_add_function(cfg, &agdev_g->func);
-	if (res < 0)
-		kfree(agdev_g);
-
-	return res;
+CONFIGFS_ATTR_STRUCT(f_uac2_opts);
+CONFIGFS_ATTR_OPS(f_uac2_opts);
+
+static void f_uac2_attr_release(struct config_item *item)
+{
+	struct f_uac2_opts *opts = to_f_uac2_opts(item);
+
+	usb_put_function_instance(&opts->func_inst);
 }
 
-static void
-uac2_unbind_config(struct usb_configuration *cfg)
+static struct configfs_item_operations f_uac2_item_ops = {
+	.release	= f_uac2_attr_release,
+	.show_attribute	= f_uac2_opts_attr_show,
+	.store_attribute = f_uac2_opts_attr_store,
+};
+
+#define UAC2_ATTRIBUTE(name)						\
+static ssize_t f_uac2_opts_##name##_show(struct f_uac2_opts *opts,	\
+					 char *page)			\
+{									\
+	int result;							\
+									\
+	mutex_lock(&opts->lock);					\
+	result = sprintf(page, "%u\n", opts->name);			\
+	mutex_unlock(&opts->lock);					\
+									\
+	return result;							\
+}									\
+									\
+static ssize_t f_uac2_opts_##name##_store(struct f_uac2_opts *opts,	\
+					  const char *page, size_t len)	\
+{									\
+	int ret;							\
+	u32 num;							\
+									\
+	mutex_lock(&opts->lock);					\
+	if (opts->refcnt) {						\
+		ret = -EBUSY;						\
+		goto end;						\
+	}								\
+									\
+	ret = kstrtou32(page, 0, &num);					\
+	if (ret)							\
+		goto end;						\
+									\
+	opts->name = num;						\
+	ret = len;							\
+									\
+end:									\
+	mutex_unlock(&opts->lock);					\
+	return ret;							\
+}									\
+									\
+static struct f_uac2_opts_attribute f_uac2_opts_##name =		\
+	__CONFIGFS_ATTR(name, S_IRUGO | S_IWUSR,			\
+			f_uac2_opts_##name##_show,			\
+			f_uac2_opts_##name##_store)
+
+UAC2_ATTRIBUTE(p_chmask);
+UAC2_ATTRIBUTE(p_srate);
+UAC2_ATTRIBUTE(p_ssize);
+UAC2_ATTRIBUTE(c_chmask);
+UAC2_ATTRIBUTE(c_srate);
+UAC2_ATTRIBUTE(c_ssize);
+
+static struct configfs_attribute *f_uac2_attrs[] = {
+	&f_uac2_opts_p_chmask.attr,
+	&f_uac2_opts_p_srate.attr,
+	&f_uac2_opts_p_ssize.attr,
+	&f_uac2_opts_c_chmask.attr,
+	&f_uac2_opts_c_srate.attr,
+	&f_uac2_opts_c_ssize.attr,
+	NULL,
+};
+
+static struct config_item_type f_uac2_func_type = {
+	.ct_item_ops	= &f_uac2_item_ops,
+	.ct_attrs	= f_uac2_attrs,
+	.ct_owner	= THIS_MODULE,
+};
+
+static void afunc_free_inst(struct usb_function_instance *f)
 {
-	kfree(agdev_g);
-	agdev_g = NULL;
+	struct f_uac2_opts *opts;
+
+	opts = container_of(f, struct f_uac2_opts, func_inst);
+	kfree(opts);
 }
+
+static struct usb_function_instance *afunc_alloc_inst(void)
+{
+	struct f_uac2_opts *opts;
+
+	opts = kzalloc(sizeof(*opts), GFP_KERNEL);
+	if (!opts)
+		return ERR_PTR(-ENOMEM);
+
+	mutex_init(&opts->lock);
+	opts->func_inst.free_func_inst = afunc_free_inst;
+
+	config_group_init_type_name(&opts->func_inst.group, "",
+				    &f_uac2_func_type);
+
+	opts->p_chmask = UAC2_DEF_PCHMASK;
+	opts->p_srate = UAC2_DEF_PSRATE;
+	opts->p_ssize = UAC2_DEF_PSSIZE;
+	opts->c_chmask = UAC2_DEF_CCHMASK;
+	opts->c_srate = UAC2_DEF_CSRATE;
+	opts->c_ssize = UAC2_DEF_CSSIZE;
+	return &opts->func_inst;
+}
+
+static void afunc_free(struct usb_function *f)
+{
+	struct audio_dev *agdev;
+	struct f_uac2_opts *opts;
+
+	agdev = func_to_agdev(f);
+	opts = container_of(f->fi, struct f_uac2_opts, func_inst);
+	kfree(agdev);
+	mutex_lock(&opts->lock);
+	--opts->refcnt;
+	mutex_unlock(&opts->lock);
+}
+
+static void afunc_unbind(struct usb_configuration *c, struct usb_function *f)
+{
+	struct audio_dev *agdev = func_to_agdev(f);
+	struct uac2_rtd_params *prm;
+
+	alsa_uac2_exit(agdev);
+
+	prm = &agdev->uac2.p_prm;
+	kfree(prm->rbuf);
+
+	prm = &agdev->uac2.c_prm;
+	kfree(prm->rbuf);
+	usb_free_all_descriptors(f);
+
+	if (agdev->in_ep)
+		agdev->in_ep->driver_data = NULL;
+	if (agdev->out_ep)
+		agdev->out_ep->driver_data = NULL;
+}
+
+struct usb_function *afunc_alloc(struct usb_function_instance *fi)
+{
+	struct audio_dev *agdev;
+	struct f_uac2_opts *opts;
+
+	agdev = kzalloc(sizeof(*agdev), GFP_KERNEL);
+	if (agdev == NULL)
+		return ERR_PTR(-ENOMEM);
+
+	opts = container_of(fi, struct f_uac2_opts, func_inst);
+	mutex_lock(&opts->lock);
+	++opts->refcnt;
+	mutex_unlock(&opts->lock);
+
+	agdev->func.name = "uac2_func";
+	agdev->func.bind = afunc_bind;
+	agdev->func.unbind = afunc_unbind;
+	agdev->func.set_alt = afunc_set_alt;
+	agdev->func.get_alt = afunc_get_alt;
+	agdev->func.disable = afunc_disable;
+	agdev->func.setup = afunc_setup;
+	agdev->func.free_func = afunc_free;
+
+	return &agdev->func;
+}
+
+DECLARE_USB_FUNCTION_INIT(uac2, afunc_alloc_inst, afunc_alloc);
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Yadwinder Singh");
+MODULE_AUTHOR("Jaswinder Singh");
diff --git a/drivers/usb/gadget/function/f_uvc.c b/drivers/usb/gadget/function/f_uvc.c
index e2a1f50bd93c..e126439e4b65 100644
--- a/drivers/usb/gadget/function/f_uvc.c
+++ b/drivers/usb/gadget/function/f_uvc.c
@@ -11,6 +11,7 @@
  */
 
 #include <linux/kernel.h>
+#include <linux/module.h>
 #include <linux/device.h>
 #include <linux/errno.h>
 #include <linux/fs.h>
@@ -27,24 +28,12 @@
 #include <media/v4l2-event.h>
 
 #include "uvc.h"
+#include "uvc_v4l2.h"
+#include "uvc_video.h"
+#include "u_uvc.h"
 
 unsigned int uvc_gadget_trace_param;
 
-/*-------------------------------------------------------------------------*/
-
-/* module parameters specific to the Video streaming endpoint */
-static unsigned int streaming_interval = 1;
-module_param(streaming_interval, uint, S_IRUGO|S_IWUSR);
-MODULE_PARM_DESC(streaming_interval, "1 - 16");
-
-static unsigned int streaming_maxpacket = 1024;
-module_param(streaming_maxpacket, uint, S_IRUGO|S_IWUSR);
-MODULE_PARM_DESC(streaming_maxpacket, "1 - 1023 (FS), 1 - 3072 (hs/ss)");
-
-static unsigned int streaming_maxburst;
-module_param(streaming_maxburst, uint, S_IRUGO|S_IWUSR);
-MODULE_PARM_DESC(streaming_maxburst, "0 - 15 (ss only)");
-
 /* --------------------------------------------------------------------------
  * Function descriptors
  */
@@ -75,7 +64,7 @@ static struct usb_gadget_strings *uvc_function_strings[] = {
 
 #define UVC_STATUS_MAX_PACKET_SIZE		16	/* 16 bytes status */
 
-static struct usb_interface_assoc_descriptor uvc_iad __initdata = {
+static struct usb_interface_assoc_descriptor uvc_iad = {
 	.bLength		= sizeof(uvc_iad),
 	.bDescriptorType	= USB_DT_INTERFACE_ASSOCIATION,
 	.bFirstInterface	= 0,
@@ -86,7 +75,7 @@ static struct usb_interface_assoc_descriptor uvc_iad __initdata = {
 	.iFunction		= 0,
 };
 
-static struct usb_interface_descriptor uvc_control_intf __initdata = {
+static struct usb_interface_descriptor uvc_control_intf = {
 	.bLength		= USB_DT_INTERFACE_SIZE,
 	.bDescriptorType	= USB_DT_INTERFACE,
 	.bInterfaceNumber	= UVC_INTF_VIDEO_CONTROL,
@@ -98,7 +87,7 @@ static struct usb_interface_descriptor uvc_control_intf __initdata = {
 	.iInterface		= 0,
 };
 
-static struct usb_endpoint_descriptor uvc_control_ep __initdata = {
+static struct usb_endpoint_descriptor uvc_control_ep = {
 	.bLength		= USB_DT_ENDPOINT_SIZE,
 	.bDescriptorType	= USB_DT_ENDPOINT,
 	.bEndpointAddress	= USB_DIR_IN,
@@ -107,7 +96,7 @@ static struct usb_endpoint_descriptor uvc_control_ep __initdata = {
 	.bInterval		= 8,
 };
 
-static struct usb_ss_ep_comp_descriptor uvc_ss_control_comp __initdata = {
+static struct usb_ss_ep_comp_descriptor uvc_ss_control_comp = {
 	.bLength		= sizeof(uvc_ss_control_comp),
 	.bDescriptorType	= USB_DT_SS_ENDPOINT_COMP,
 	/* The following 3 values can be tweaked if necessary. */
@@ -116,14 +105,14 @@ static struct usb_ss_ep_comp_descriptor uvc_ss_control_comp __initdata = {
 	.wBytesPerInterval	= cpu_to_le16(UVC_STATUS_MAX_PACKET_SIZE),
 };
 
-static struct uvc_control_endpoint_descriptor uvc_control_cs_ep __initdata = {
+static struct uvc_control_endpoint_descriptor uvc_control_cs_ep = {
 	.bLength		= UVC_DT_CONTROL_ENDPOINT_SIZE,
 	.bDescriptorType	= USB_DT_CS_ENDPOINT,
 	.bDescriptorSubType	= UVC_EP_INTERRUPT,
 	.wMaxTransferSize	= cpu_to_le16(UVC_STATUS_MAX_PACKET_SIZE),
 };
 
-static struct usb_interface_descriptor uvc_streaming_intf_alt0 __initdata = {
+static struct usb_interface_descriptor uvc_streaming_intf_alt0 = {
 	.bLength		= USB_DT_INTERFACE_SIZE,
 	.bDescriptorType	= USB_DT_INTERFACE,
 	.bInterfaceNumber	= UVC_INTF_VIDEO_STREAMING,
@@ -135,7 +124,7 @@ static struct usb_interface_descriptor uvc_streaming_intf_alt0 __initdata = {
 	.iInterface		= 0,
 };
 
-static struct usb_interface_descriptor uvc_streaming_intf_alt1 __initdata = {
+static struct usb_interface_descriptor uvc_streaming_intf_alt1 = {
 	.bLength		= USB_DT_INTERFACE_SIZE,
 	.bDescriptorType	= USB_DT_INTERFACE,
 	.bInterfaceNumber	= UVC_INTF_VIDEO_STREAMING,
@@ -147,7 +136,7 @@ static struct usb_interface_descriptor uvc_streaming_intf_alt1 __initdata = {
 	.iInterface		= 0,
 };
 
-static struct usb_endpoint_descriptor uvc_fs_streaming_ep __initdata = {
+static struct usb_endpoint_descriptor uvc_fs_streaming_ep = {
 	.bLength		= USB_DT_ENDPOINT_SIZE,
 	.bDescriptorType	= USB_DT_ENDPOINT,
 	.bEndpointAddress	= USB_DIR_IN,
@@ -158,7 +147,7 @@ static struct usb_endpoint_descriptor uvc_fs_streaming_ep __initdata = {
 	 */
 };
 
-static struct usb_endpoint_descriptor uvc_hs_streaming_ep __initdata = {
+static struct usb_endpoint_descriptor uvc_hs_streaming_ep = {
 	.bLength		= USB_DT_ENDPOINT_SIZE,
 	.bDescriptorType	= USB_DT_ENDPOINT,
 	.bEndpointAddress	= USB_DIR_IN,
@@ -169,7 +158,7 @@ static struct usb_endpoint_descriptor uvc_hs_streaming_ep __initdata = {
 	 */
 };
 
-static struct usb_endpoint_descriptor uvc_ss_streaming_ep __initdata = {
+static struct usb_endpoint_descriptor uvc_ss_streaming_ep = {
 	.bLength		= USB_DT_ENDPOINT_SIZE,
 	.bDescriptorType	= USB_DT_ENDPOINT,
 
@@ -181,7 +170,7 @@ static struct usb_endpoint_descriptor uvc_ss_streaming_ep __initdata = {
 	 */
 };
 
-static struct usb_ss_ep_comp_descriptor uvc_ss_streaming_comp __initdata = {
+static struct usb_ss_ep_comp_descriptor uvc_ss_streaming_comp = {
 	.bLength		= sizeof(uvc_ss_streaming_comp),
 	.bDescriptorType	= USB_DT_SS_ENDPOINT_COMP,
 	/* The bMaxBurst, bmAttributes and wBytesPerInterval values will be
@@ -208,6 +197,12 @@ static const struct usb_descriptor_header * const uvc_ss_streaming[] = {
 	NULL,
 };
 
+void uvc_set_trace_param(unsigned int trace)
+{
+	uvc_gadget_trace_param = trace;
+}
+EXPORT_SYMBOL(uvc_set_trace_param);
+
 /* --------------------------------------------------------------------------
  * Control requests
  */
@@ -251,6 +246,12 @@ uvc_function_setup(struct usb_function *f, const struct usb_ctrlrequest *ctrl)
 	if (le16_to_cpu(ctrl->wLength) > UVC_MAX_REQUEST_SIZE)
 		return -EINVAL;
 
+	/* Tell the complete callback to generate an event for the next request
+	 * that will be enqueued by UVCIOC_SEND_RESPONSE.
+	 */
+	uvc->event_setup_out = !(ctrl->bRequestType & USB_DIR_IN);
+	uvc->event_length = le16_to_cpu(ctrl->wLength);
+
 	memset(&v4l2_event, 0, sizeof(v4l2_event));
 	v4l2_event.type = UVC_EVENT_SETUP;
 	memcpy(&uvc_event->req, ctrl, sizeof(uvc_event->req));
@@ -408,7 +409,9 @@ uvc_register_video(struct uvc_device *uvc)
 
 	video->v4l2_dev = &uvc->v4l2_dev;
 	video->fops = &uvc_v4l2_fops;
+	video->ioctl_ops = &uvc_v4l2_ioctl_ops;
 	video->release = video_device_release;
+	video->vfl_dir = VFL_DIR_TX;
 	strlcpy(video->name, cdev->gadget->name, sizeof(video->name));
 
 	uvc->vdev = video;
@@ -434,7 +437,7 @@ uvc_register_video(struct uvc_device *uvc)
 		} \
 	} while (0)
 
-static struct usb_descriptor_header ** __init
+static struct usb_descriptor_header **
 uvc_copy_descriptors(struct uvc_device *uvc, enum usb_device_speed speed)
 {
 	struct uvc_input_header_descriptor *uvc_streaming_header;
@@ -554,45 +557,26 @@ uvc_copy_descriptors(struct uvc_device *uvc, enum usb_device_speed speed)
 	return hdr;
 }
 
-static void
-uvc_function_unbind(struct usb_configuration *c, struct usb_function *f)
-{
-	struct usb_composite_dev *cdev = c->cdev;
-	struct uvc_device *uvc = to_uvc(f);
-
-	INFO(cdev, "uvc_function_unbind\n");
-
-	video_unregister_device(uvc->vdev);
-	v4l2_device_unregister(&uvc->v4l2_dev);
-	uvc->control_ep->driver_data = NULL;
-	uvc->video.ep->driver_data = NULL;
-
-	uvc_en_us_strings[UVC_STRING_CONTROL_IDX].id = 0;
-	usb_ep_free_request(cdev->gadget->ep0, uvc->control_req);
-	kfree(uvc->control_buf);
-
-	usb_free_all_descriptors(f);
-
-	kfree(uvc);
-}
-
-static int __init
+static int
 uvc_function_bind(struct usb_configuration *c, struct usb_function *f)
 {
 	struct usb_composite_dev *cdev = c->cdev;
 	struct uvc_device *uvc = to_uvc(f);
+	struct usb_string *us;
 	unsigned int max_packet_mult;
 	unsigned int max_packet_size;
 	struct usb_ep *ep;
+	struct f_uvc_opts *opts;
 	int ret = -EINVAL;
 
 	INFO(cdev, "uvc_function_bind\n");
 
+	opts = to_f_uvc_opts(f->fi);
 	/* Sanity check the streaming endpoint module parameters.
 	 */
-	streaming_interval = clamp(streaming_interval, 1U, 16U);
-	streaming_maxpacket = clamp(streaming_maxpacket, 1U, 3072U);
-	streaming_maxburst = min(streaming_maxburst, 15U);
+	opts->streaming_interval = clamp(opts->streaming_interval, 1U, 16U);
+	opts->streaming_maxpacket = clamp(opts->streaming_maxpacket, 1U, 3072U);
+	opts->streaming_maxburst = min(opts->streaming_maxburst, 15U);
 
 	/* Fill in the FS/HS/SS Video Streaming specific descriptors from the
 	 * module parameters.
@@ -600,30 +584,32 @@ uvc_function_bind(struct usb_configuration *c, struct usb_function *f)
 	 * NOTE: We assume that the user knows what they are doing and won't
 	 * give parameters that their UDC doesn't support.
 	 */
-	if (streaming_maxpacket <= 1024) {
+	if (opts->streaming_maxpacket <= 1024) {
 		max_packet_mult = 1;
-		max_packet_size = streaming_maxpacket;
-	} else if (streaming_maxpacket <= 2048) {
+		max_packet_size = opts->streaming_maxpacket;
+	} else if (opts->streaming_maxpacket <= 2048) {
 		max_packet_mult = 2;
-		max_packet_size = streaming_maxpacket / 2;
+		max_packet_size = opts->streaming_maxpacket / 2;
 	} else {
 		max_packet_mult = 3;
-		max_packet_size = streaming_maxpacket / 3;
+		max_packet_size = opts->streaming_maxpacket / 3;
 	}
 
-	uvc_fs_streaming_ep.wMaxPacketSize = min(streaming_maxpacket, 1023U);
-	uvc_fs_streaming_ep.bInterval = streaming_interval;
+	uvc_fs_streaming_ep.wMaxPacketSize =
+		cpu_to_le16(min(opts->streaming_maxpacket, 1023U));
+	uvc_fs_streaming_ep.bInterval = opts->streaming_interval;
 
-	uvc_hs_streaming_ep.wMaxPacketSize = max_packet_size;
-	uvc_hs_streaming_ep.wMaxPacketSize |= ((max_packet_mult - 1) << 11);
-	uvc_hs_streaming_ep.bInterval = streaming_interval;
+	uvc_hs_streaming_ep.wMaxPacketSize =
+		cpu_to_le16(max_packet_size | ((max_packet_mult - 1) << 11));
+	uvc_hs_streaming_ep.bInterval = opts->streaming_interval;
 
-	uvc_ss_streaming_ep.wMaxPacketSize = max_packet_size;
-	uvc_ss_streaming_ep.bInterval = streaming_interval;
+	uvc_ss_streaming_ep.wMaxPacketSize = cpu_to_le16(max_packet_size);
+	uvc_ss_streaming_ep.bInterval = opts->streaming_interval;
 	uvc_ss_streaming_comp.bmAttributes = max_packet_mult - 1;
-	uvc_ss_streaming_comp.bMaxBurst = streaming_maxburst;
+	uvc_ss_streaming_comp.bMaxBurst = opts->streaming_maxburst;
 	uvc_ss_streaming_comp.wBytesPerInterval =
-		max_packet_size * max_packet_mult * streaming_maxburst;
+		cpu_to_le16(max_packet_size * max_packet_mult *
+			    opts->streaming_maxburst);
 
 	/* Allocate endpoints. */
 	ep = usb_ep_autoconfig(cdev->gadget, &uvc_control_ep);
@@ -653,6 +639,18 @@ uvc_function_bind(struct usb_configuration *c, struct usb_function *f)
 	uvc_hs_streaming_ep.bEndpointAddress = uvc->video.ep->address;
 	uvc_ss_streaming_ep.bEndpointAddress = uvc->video.ep->address;
 
+	us = usb_gstrings_attach(cdev, uvc_function_strings,
+				 ARRAY_SIZE(uvc_en_us_strings));
+	if (IS_ERR(us)) {
+		ret = PTR_ERR(us);
+		goto error;
+	}
+	uvc_iad.iFunction = us[UVC_STRING_CONTROL_IDX].id;
+	uvc_control_intf.iInterface = us[UVC_STRING_CONTROL_IDX].id;
+	ret = us[UVC_STRING_STREAMING_IDX].id;
+	uvc_streaming_intf_alt0.iInterface = ret;
+	uvc_streaming_intf_alt1.iInterface = ret;
+
 	/* Allocate interface IDs. */
 	if ((ret = usb_interface_id(c, f)) < 0)
 		goto error;
@@ -697,7 +695,7 @@ uvc_function_bind(struct usb_configuration *c, struct usb_function *f)
 	}
 
 	/* Initialise video. */
-	ret = uvc_video_init(&uvc->video);
+	ret = uvcg_video_init(&uvc->video);
 	if (ret < 0)
 		goto error;
 
@@ -720,10 +718,9 @@ error:
 	if (uvc->video.ep)
 		uvc->video.ep->driver_data = NULL;
 
-	if (uvc->control_req) {
+	if (uvc->control_req)
 		usb_ep_free_request(cdev->gadget->ep0, uvc->control_req);
-		kfree(uvc->control_buf);
-	}
+	kfree(uvc->control_buf);
 
 	usb_free_all_descriptors(f);
 	return ret;
@@ -733,104 +730,81 @@ error:
  * USB gadget function
  */
 
-/**
- * uvc_bind_config - add a UVC function to a configuration
- * @c: the configuration to support the UVC instance
- * Context: single threaded during gadget setup
- *
- * Returns zero on success, else negative errno.
- *
- * Caller must have called @uvc_setup(). Caller is also responsible for
- * calling @uvc_cleanup() before module unload.
- */
-int __init
-uvc_bind_config(struct usb_configuration *c,
-		const struct uvc_descriptor_header * const *fs_control,
-		const struct uvc_descriptor_header * const *ss_control,
-		const struct uvc_descriptor_header * const *fs_streaming,
-		const struct uvc_descriptor_header * const *hs_streaming,
-		const struct uvc_descriptor_header * const *ss_streaming)
+static void uvc_free_inst(struct usb_function_instance *f)
 {
-	struct uvc_device *uvc;
-	int ret = 0;
+	struct f_uvc_opts *opts = to_f_uvc_opts(f);
 
-	/* TODO Check if the USB device controller supports the required
-	 * features.
-	 */
-	if (!gadget_is_dualspeed(c->cdev->gadget))
-		return -EINVAL;
+	kfree(opts);
+}
 
-	uvc = kzalloc(sizeof(*uvc), GFP_KERNEL);
-	if (uvc == NULL)
-		return -ENOMEM;
+static struct usb_function_instance *uvc_alloc_inst(void)
+{
+	struct f_uvc_opts *opts;
 
-	uvc->state = UVC_STATE_DISCONNECTED;
+	opts = kzalloc(sizeof(*opts), GFP_KERNEL);
+	if (!opts)
+		return ERR_PTR(-ENOMEM);
+	opts->func_inst.free_func_inst = uvc_free_inst;
 
-	/* Validate the descriptors. */
-	if (fs_control == NULL || fs_control[0] == NULL ||
-	    fs_control[0]->bDescriptorSubType != UVC_VC_HEADER)
-		goto error;
+	return &opts->func_inst;
+}
 
-	if (ss_control == NULL || ss_control[0] == NULL ||
-	    ss_control[0]->bDescriptorSubType != UVC_VC_HEADER)
-		goto error;
+static void uvc_free(struct usb_function *f)
+{
+	struct uvc_device *uvc = to_uvc(f);
 
-	if (fs_streaming == NULL || fs_streaming[0] == NULL ||
-	    fs_streaming[0]->bDescriptorSubType != UVC_VS_INPUT_HEADER)
-		goto error;
+	kfree(uvc);
+}
 
-	if (hs_streaming == NULL || hs_streaming[0] == NULL ||
-	    hs_streaming[0]->bDescriptorSubType != UVC_VS_INPUT_HEADER)
-		goto error;
+static void uvc_unbind(struct usb_configuration *c, struct usb_function *f)
+{
+	struct usb_composite_dev *cdev = c->cdev;
+	struct uvc_device *uvc = to_uvc(f);
 
-	if (ss_streaming == NULL || ss_streaming[0] == NULL ||
-	    ss_streaming[0]->bDescriptorSubType != UVC_VS_INPUT_HEADER)
-		goto error;
+	INFO(cdev, "%s\n", __func__);
 
-	uvc->desc.fs_control = fs_control;
-	uvc->desc.ss_control = ss_control;
-	uvc->desc.fs_streaming = fs_streaming;
-	uvc->desc.hs_streaming = hs_streaming;
-	uvc->desc.ss_streaming = ss_streaming;
+	video_unregister_device(uvc->vdev);
+	v4l2_device_unregister(&uvc->v4l2_dev);
+	uvc->control_ep->driver_data = NULL;
+	uvc->video.ep->driver_data = NULL;
 
-	/* String descriptors are global, we only need to allocate string IDs
-	 * for the first UVC function. UVC functions beyond the first (if any)
-	 * will reuse the same IDs.
-	 */
-	if (uvc_en_us_strings[UVC_STRING_CONTROL_IDX].id == 0) {
-		ret = usb_string_ids_tab(c->cdev, uvc_en_us_strings);
-		if (ret)
-			goto error;
-		uvc_iad.iFunction =
-			uvc_en_us_strings[UVC_STRING_CONTROL_IDX].id;
-		uvc_control_intf.iInterface =
-			uvc_en_us_strings[UVC_STRING_CONTROL_IDX].id;
-		ret = uvc_en_us_strings[UVC_STRING_STREAMING_IDX].id;
-		uvc_streaming_intf_alt0.iInterface = ret;
-		uvc_streaming_intf_alt1.iInterface = ret;
-	}
+	usb_ep_free_request(cdev->gadget->ep0, uvc->control_req);
+	kfree(uvc->control_buf);
+
+	usb_free_all_descriptors(f);
+}
+
+static struct usb_function *uvc_alloc(struct usb_function_instance *fi)
+{
+	struct uvc_device *uvc;
+	struct f_uvc_opts *opts;
+
+	uvc = kzalloc(sizeof(*uvc), GFP_KERNEL);
+	if (uvc == NULL)
+		return ERR_PTR(-ENOMEM);
+
+	uvc->state = UVC_STATE_DISCONNECTED;
+	opts = to_f_uvc_opts(fi);
+
+	uvc->desc.fs_control = opts->fs_control;
+	uvc->desc.ss_control = opts->ss_control;
+	uvc->desc.fs_streaming = opts->fs_streaming;
+	uvc->desc.hs_streaming = opts->hs_streaming;
+	uvc->desc.ss_streaming = opts->ss_streaming;
 
 	/* Register the function. */
 	uvc->func.name = "uvc";
-	uvc->func.strings = uvc_function_strings;
 	uvc->func.bind = uvc_function_bind;
-	uvc->func.unbind = uvc_function_unbind;
+	uvc->func.unbind = uvc_unbind;
 	uvc->func.get_alt = uvc_function_get_alt;
 	uvc->func.set_alt = uvc_function_set_alt;
 	uvc->func.disable = uvc_function_disable;
 	uvc->func.setup = uvc_function_setup;
+	uvc->func.free_func = uvc_free;
 
-	ret = usb_add_function(c, &uvc->func);
-	if (ret)
-		kfree(uvc);
-
-	return ret;
-
-error:
-	kfree(uvc);
-	return ret;
+	return &uvc->func;
 }
 
-module_param_named(trace, uvc_gadget_trace_param, uint, S_IRUGO|S_IWUSR);
-MODULE_PARM_DESC(trace, "Trace level bitmask");
-
+DECLARE_USB_FUNCTION_INIT(uvc, uvc_alloc_inst, uvc_alloc);
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Laurent Pinchart");
diff --git a/drivers/usb/gadget/function/f_uvc.h b/drivers/usb/gadget/function/f_uvc.h
index ec52752f7326..d0a73bdcbba1 100644
--- a/drivers/usb/gadget/function/f_uvc.h
+++ b/drivers/usb/gadget/function/f_uvc.h
@@ -16,12 +16,13 @@
 #include <linux/usb/composite.h>
 #include <linux/usb/video.h>
 
-int uvc_bind_config(struct usb_configuration *c,
-		    const struct uvc_descriptor_header * const *fs_control,
-		    const struct uvc_descriptor_header * const *hs_control,
-		    const struct uvc_descriptor_header * const *fs_streaming,
-		    const struct uvc_descriptor_header * const *hs_streaming,
-		    const struct uvc_descriptor_header * const *ss_streaming);
+#include "uvc.h"
+
+void uvc_function_setup_continue(struct uvc_device *uvc);
+
+void uvc_function_connect(struct uvc_device *uvc);
+
+void uvc_function_disconnect(struct uvc_device *uvc);
 
 #endif /* _F_UVC_H_ */
 
diff --git a/drivers/usb/gadget/function/g_zero.h b/drivers/usb/gadget/function/g_zero.h
index 15f180904f8a..2ce28b9d97cc 100644
--- a/drivers/usb/gadget/function/g_zero.h
+++ b/drivers/usb/gadget/function/g_zero.h
@@ -10,6 +10,8 @@
 #define GZERO_QLEN		32
 #define GZERO_ISOC_INTERVAL	4
 #define GZERO_ISOC_MAXPACKET	1024
+#define GZERO_INT_INTERVAL	1 /* Default interrupt interval = 1 ms */
+#define GZERO_INT_MAXPACKET	1024
 
 struct usb_zero_options {
 	unsigned pattern;
@@ -17,6 +19,10 @@ struct usb_zero_options {
 	unsigned isoc_maxpacket;
 	unsigned isoc_mult;
 	unsigned isoc_maxburst;
+	unsigned int_interval; /* In ms */
+	unsigned int_maxpacket;
+	unsigned int_mult;
+	unsigned int_maxburst;
 	unsigned bulk_buflen;
 	unsigned qlen;
 };
@@ -28,6 +34,10 @@ struct f_ss_opts {
 	unsigned isoc_maxpacket;
 	unsigned isoc_mult;
 	unsigned isoc_maxburst;
+	unsigned int_interval; /* In ms */
+	unsigned int_maxpacket;
+	unsigned int_mult;
+	unsigned int_maxburst;
 	unsigned bulk_buflen;
 
 	/*
@@ -62,6 +72,7 @@ int lb_modinit(void);
 void free_ep_req(struct usb_ep *ep, struct usb_request *req);
 void disable_endpoints(struct usb_composite_dev *cdev,
 		struct usb_ep *in, struct usb_ep *out,
-		struct usb_ep *iso_in, struct usb_ep *iso_out);
+		struct usb_ep *iso_in, struct usb_ep *iso_out,
+		struct usb_ep *int_in, struct usb_ep *int_out);
 
 #endif /* __G_ZERO_H */
diff --git a/drivers/usb/gadget/function/u_fs.h b/drivers/usb/gadget/function/u_fs.h
index d48897e8ffeb..cd128e31f808 100644
--- a/drivers/usb/gadget/function/u_fs.h
+++ b/drivers/usb/gadget/function/u_fs.h
@@ -224,6 +224,8 @@ struct ffs_data {
 	void				*ms_os_descs_ext_prop_name_avail;
 	void				*ms_os_descs_ext_prop_data_avail;
 
+	unsigned			user_flags;
+
 	u8				eps_addrmap[15];
 
 	unsigned short			strings_count;
diff --git a/drivers/usb/gadget/function/u_serial.c b/drivers/usb/gadget/function/u_serial.c
index ad0aca812002..491082aaf103 100644
--- a/drivers/usb/gadget/function/u_serial.c
+++ b/drivers/usb/gadget/function/u_serial.c
@@ -55,11 +55,8 @@
  * for a telephone or fax link.  And ttyGS2 might be something that just
  * needs a simple byte stream interface for some messaging protocol that
  * is managed in userspace ... OBEX, PTP, and MTP have been mentioned.
- */
-
-#define PREFIX	"ttyGS"
-
-/*
+ *
+ *
  * gserial is the lifecycle interface, used by USB functions
  * gs_port is the I/O nexus, used by the tty driver
  * tty_struct links to the tty/filesystem framework
@@ -385,9 +382,9 @@ __acquires(&port->port_lock)
 		list_del(&req->list);
 		req->zero = (gs_buf_data_avail(&port->port_write_buf) == 0);
 
-		pr_vdebug(PREFIX "%d: tx len=%d, 0x%02x 0x%02x 0x%02x ...\n",
-				port->port_num, len, *((u8 *)req->buf),
-				*((u8 *)req->buf+1), *((u8 *)req->buf+2));
+		pr_vdebug("ttyGS%d: tx len=%d, 0x%02x 0x%02x 0x%02x ...\n",
+			  port->port_num, len, *((u8 *)req->buf),
+			  *((u8 *)req->buf+1), *((u8 *)req->buf+2));
 
 		/* Drop lock while we call out of driver; completions
 		 * could be issued while we do so.  Disconnection may
@@ -503,13 +500,13 @@ static void gs_rx_push(unsigned long _port)
 		switch (req->status) {
 		case -ESHUTDOWN:
 			disconnect = true;
-			pr_vdebug(PREFIX "%d: shutdown\n", port->port_num);
+			pr_vdebug("ttyGS%d: shutdown\n", port->port_num);
 			break;
 
 		default:
 			/* presumably a transient fault */
-			pr_warning(PREFIX "%d: unexpected RX status %d\n",
-					port->port_num, req->status);
+			pr_warn("ttyGS%d: unexpected RX status %d\n",
+				port->port_num, req->status);
 			/* FALLTHROUGH */
 		case 0:
 			/* normal completion */
@@ -537,9 +534,8 @@ static void gs_rx_push(unsigned long _port)
 			if (count != size) {
 				/* stop pushing; TTY layer can't handle more */
 				port->n_read += count;
-				pr_vdebug(PREFIX "%d: rx block %d/%d\n",
-						port->port_num,
-						count, req->actual);
+				pr_vdebug("ttyGS%d: rx block %d/%d\n",
+					  port->port_num, count, req->actual);
 				break;
 			}
 			port->n_read = 0;
@@ -569,7 +565,7 @@ static void gs_rx_push(unsigned long _port)
 			if (do_push)
 				tasklet_schedule(&port->push);
 			else
-				pr_warning(PREFIX "%d: RX not scheduled?\n",
+				pr_warn("ttyGS%d: RX not scheduled?\n",
 					port->port_num);
 		}
 	}
@@ -985,7 +981,7 @@ static void gs_unthrottle(struct tty_struct *tty)
 		 * read queue backs up enough we'll be NAKing OUT packets.
 		 */
 		tasklet_schedule(&port->push);
-		pr_vdebug(PREFIX "%d: unthrottle\n", port->port_num);
+		pr_vdebug("ttyGS%d: unthrottle\n", port->port_num);
 	}
 	spin_unlock_irqrestore(&port->port_lock, flags);
 }
@@ -1295,7 +1291,7 @@ static int userial_init(void)
 		return -ENOMEM;
 
 	gs_tty_driver->driver_name = "g_serial";
-	gs_tty_driver->name = PREFIX;
+	gs_tty_driver->name = "ttyGS";
 	/* uses dynamically assigned dev_t values */
 
 	gs_tty_driver->type = TTY_DRIVER_TYPE_SERIAL;
diff --git a/drivers/usb/gadget/function/u_uac1.c b/drivers/usb/gadget/function/u_uac1.c
index 7a55fea43430..a44a07f30281 100644
--- a/drivers/usb/gadget/function/u_uac1.c
+++ b/drivers/usb/gadget/function/u_uac1.c
@@ -10,6 +10,7 @@
  */
 
 #include <linux/kernel.h>
+#include <linux/module.h>
 #include <linux/slab.h>
 #include <linux/device.h>
 #include <linux/delay.h>
@@ -23,22 +24,6 @@
  * This component encapsulates the ALSA devices for USB audio gadget
  */
 
-#define FILE_PCM_PLAYBACK	"/dev/snd/pcmC0D0p"
-#define FILE_PCM_CAPTURE	"/dev/snd/pcmC0D0c"
-#define FILE_CONTROL		"/dev/snd/controlC0"
-
-static char *fn_play = FILE_PCM_PLAYBACK;
-module_param(fn_play, charp, S_IRUGO);
-MODULE_PARM_DESC(fn_play, "Playback PCM device file name");
-
-static char *fn_cap = FILE_PCM_CAPTURE;
-module_param(fn_cap, charp, S_IRUGO);
-MODULE_PARM_DESC(fn_cap, "Capture PCM device file name");
-
-static char *fn_cntl = FILE_CONTROL;
-module_param(fn_cntl, charp, S_IRUGO);
-MODULE_PARM_DESC(fn_cntl, "Control device file name");
-
 /*-------------------------------------------------------------------------*/
 
 /**
@@ -167,7 +152,7 @@ static int playback_default_hw_params(struct gaudio_snd_dev *snd)
 /**
  * Playback audio buffer data by ALSA PCM device
  */
-static size_t u_audio_playback(struct gaudio *card, void *buf, size_t count)
+size_t u_audio_playback(struct gaudio *card, void *buf, size_t count)
 {
 	struct gaudio_snd_dev	*snd = &card->playback;
 	struct snd_pcm_substream *substream = snd->substream;
@@ -202,12 +187,12 @@ try_again:
 	return 0;
 }
 
-static int u_audio_get_playback_channels(struct gaudio *card)
+int u_audio_get_playback_channels(struct gaudio *card)
 {
 	return card->playback.channels;
 }
 
-static int u_audio_get_playback_rate(struct gaudio *card)
+int u_audio_get_playback_rate(struct gaudio *card)
 {
 	return card->playback.rate;
 }
@@ -220,6 +205,13 @@ static int gaudio_open_snd_dev(struct gaudio *card)
 {
 	struct snd_pcm_file *pcm_file;
 	struct gaudio_snd_dev *snd;
+	struct f_uac1_opts *opts;
+	char *fn_play, *fn_cap, *fn_cntl;
+
+	opts = container_of(card->func.fi, struct f_uac1_opts, func_inst);
+	fn_play = opts->fn_play;
+	fn_cap = opts->fn_cap;
+	fn_cntl = opts->fn_cntl;
 
 	if (!card)
 		return -ENODEV;
@@ -293,7 +285,6 @@ static int gaudio_close_snd_dev(struct gaudio *gau)
 	return 0;
 }
 
-static struct gaudio *the_card;
 /**
  * gaudio_setup - setup ALSA interface and preparing for USB transfer
  *
@@ -301,15 +292,13 @@ static struct gaudio *the_card;
  *
  * Returns negative errno, or zero on success
  */
-int __init gaudio_setup(struct gaudio *card)
+int gaudio_setup(struct gaudio *card)
 {
 	int	ret;
 
 	ret = gaudio_open_snd_dev(card);
 	if (ret)
 		ERROR(card, "we need at least one control device\n");
-	else if (!the_card)
-		the_card = card;
 
 	return ret;
 
@@ -320,11 +309,10 @@ int __init gaudio_setup(struct gaudio *card)
  *
  * This is called to free all resources allocated by @gaudio_setup().
  */
-void gaudio_cleanup(void)
+void gaudio_cleanup(struct gaudio *the_card)
 {
 	if (the_card) {
 		gaudio_close_snd_dev(the_card);
-		the_card = NULL;
 	}
 }
 
diff --git a/drivers/usb/gadget/function/u_uac1.h b/drivers/usb/gadget/function/u_uac1.h
index 18c2e729faf6..f8b17fe82efe 100644
--- a/drivers/usb/gadget/function/u_uac1.h
+++ b/drivers/usb/gadget/function/u_uac1.h
@@ -23,6 +23,14 @@
 
 #include "gadget_chips.h"
 
+#define FILE_PCM_PLAYBACK	"/dev/snd/pcmC0D0p"
+#define FILE_PCM_CAPTURE	"/dev/snd/pcmC0D0c"
+#define FILE_CONTROL		"/dev/snd/controlC0"
+
+#define UAC1_OUT_EP_MAX_PACKET_SIZE	200
+#define UAC1_REQ_COUNT			256
+#define UAC1_AUDIO_BUF_SIZE		48000
+
 /*
  * This represents the USB side of an audio card device, managed by a USB
  * function which provides control and stream interfaces.
@@ -50,7 +58,28 @@ struct gaudio {
 	/* TODO */
 };
 
+struct f_uac1_opts {
+	struct usb_function_instance	func_inst;
+	int				req_buf_size;
+	int				req_count;
+	int				audio_buf_size;
+	char				*fn_play;
+	char				*fn_cap;
+	char				*fn_cntl;
+	unsigned			bound:1;
+	unsigned			fn_play_alloc:1;
+	unsigned			fn_cap_alloc:1;
+	unsigned			fn_cntl_alloc:1;
+	struct gaudio			*card;
+	struct mutex			lock;
+	int				refcnt;
+};
+
 int gaudio_setup(struct gaudio *card);
-void gaudio_cleanup(void);
+void gaudio_cleanup(struct gaudio *the_card);
+
+size_t u_audio_playback(struct gaudio *card, void *buf, size_t count);
+int u_audio_get_playback_channels(struct gaudio *card);
+int u_audio_get_playback_rate(struct gaudio *card);
 
 #endif /* __U_AUDIO_H */
diff --git a/drivers/usb/gadget/function/u_uac2.h b/drivers/usb/gadget/function/u_uac2.h
new file mode 100644
index 000000000000..78dd37279bd4
--- /dev/null
+++ b/drivers/usb/gadget/function/u_uac2.h
@@ -0,0 +1,42 @@
+/*
+ * u_uac2.h
+ *
+ * Utility definitions for UAC2 function
+ *
+ * Copyright (c) 2014 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Author: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef U_UAC2_H
+#define U_UAC2_H
+
+#include <linux/usb/composite.h>
+
+#define UAC2_DEF_PCHMASK 0x3
+#define UAC2_DEF_PSRATE 48000
+#define UAC2_DEF_PSSIZE 2
+#define UAC2_DEF_CCHMASK 0x3
+#define UAC2_DEF_CSRATE 64000
+#define UAC2_DEF_CSSIZE 2
+
+struct f_uac2_opts {
+	struct usb_function_instance	func_inst;
+	int				p_chmask;
+	int				p_srate;
+	int				p_ssize;
+	int				c_chmask;
+	int				c_srate;
+	int				c_ssize;
+	bool				bound;
+
+	struct mutex			lock;
+	int				refcnt;
+};
+
+#endif
diff --git a/drivers/usb/gadget/function/u_uvc.h b/drivers/usb/gadget/function/u_uvc.h
new file mode 100644
index 000000000000..2a8dfdff0332
--- /dev/null
+++ b/drivers/usb/gadget/function/u_uvc.h
@@ -0,0 +1,39 @@
+/*
+ * u_uvc.h
+ *
+ * Utility definitions for the uvc function
+ *
+ * Copyright (c) 2013-2014 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Author: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef U_UVC_H
+#define U_UVC_H
+
+#include <linux/usb/composite.h>
+
+#define to_f_uvc_opts(f)	container_of(f, struct f_uvc_opts, func_inst)
+
+struct f_uvc_opts {
+	struct usb_function_instance			func_inst;
+	unsigned int					uvc_gadget_trace_param;
+	unsigned int					streaming_interval;
+	unsigned int					streaming_maxpacket;
+	unsigned int					streaming_maxburst;
+	const struct uvc_descriptor_header * const	*fs_control;
+	const struct uvc_descriptor_header * const	*ss_control;
+	const struct uvc_descriptor_header * const	*fs_streaming;
+	const struct uvc_descriptor_header * const	*hs_streaming;
+	const struct uvc_descriptor_header * const	*ss_streaming;
+};
+
+void uvc_set_trace_param(unsigned int trace);
+
+#endif /* U_UVC_H */
+
diff --git a/drivers/usb/gadget/function/uvc.h b/drivers/usb/gadget/function/uvc.h
index 7a9111de8054..f67695cb28f8 100644
--- a/drivers/usb/gadget/function/uvc.h
+++ b/drivers/usb/gadget/function/uvc.h
@@ -53,6 +53,7 @@ struct uvc_event
 #ifdef __KERNEL__
 
 #include <linux/usb.h>	/* For usb_endpoint_* */
+#include <linux/usb/composite.h>
 #include <linux/usb/gadget.h>
 #include <linux/videodev2.h>
 #include <linux/version.h>
@@ -96,9 +97,6 @@ extern unsigned int uvc_gadget_trace_param;
  * Driver specific constants
  */
 
-#define DRIVER_VERSION				"0.1.0"
-#define DRIVER_VERSION_NUMBER			KERNEL_VERSION(0, 1, 0)
-
 #define UVC_NUM_REQUESTS			4
 #define UVC_MAX_REQUEST_SIZE			64
 #define UVC_MAX_EVENTS				4
diff --git a/drivers/usb/gadget/function/uvc_queue.c b/drivers/usb/gadget/function/uvc_queue.c
index 1c29bc954db9..8ea8b3b227b4 100644
--- a/drivers/usb/gadget/function/uvc_queue.c
+++ b/drivers/usb/gadget/function/uvc_queue.c
@@ -28,7 +28,7 @@
 /* ------------------------------------------------------------------------
  * Video buffers queue management.
  *
- * Video queues is initialized by uvc_queue_init(). The function performs
+ * Video queues is initialized by uvcg_queue_init(). The function performs
  * basic initialization of the uvc_video_queue struct and never fails.
  *
  * Video buffers are managed by videobuf2. The driver uses a mutex to protect
@@ -126,13 +126,12 @@ static struct vb2_ops uvc_queue_qops = {
 	.wait_finish = uvc_wait_finish,
 };
 
-static int uvc_queue_init(struct uvc_video_queue *queue,
-			  enum v4l2_buf_type type)
+int uvcg_queue_init(struct uvc_video_queue *queue, enum v4l2_buf_type type)
 {
 	int ret;
 
 	queue->queue.type = type;
-	queue->queue.io_modes = VB2_MMAP | VB2_USERPTR;
+	queue->queue.io_modes = VB2_MMAP | VB2_USERPTR | VB2_DMABUF;
 	queue->queue.drv_priv = queue;
 	queue->queue.buf_struct_size = sizeof(struct uvc_buffer);
 	queue->queue.ops = &uvc_queue_qops;
@@ -154,7 +153,7 @@ static int uvc_queue_init(struct uvc_video_queue *queue,
 /*
  * Free the video buffers.
  */
-static void uvc_free_buffers(struct uvc_video_queue *queue)
+void uvcg_free_buffers(struct uvc_video_queue *queue)
 {
 	mutex_lock(&queue->mutex);
 	vb2_queue_release(&queue->queue);
@@ -164,8 +163,8 @@ static void uvc_free_buffers(struct uvc_video_queue *queue)
 /*
  * Allocate the video buffers.
  */
-static int uvc_alloc_buffers(struct uvc_video_queue *queue,
-			     struct v4l2_requestbuffers *rb)
+int uvcg_alloc_buffers(struct uvc_video_queue *queue,
+			      struct v4l2_requestbuffers *rb)
 {
 	int ret;
 
@@ -176,8 +175,7 @@ static int uvc_alloc_buffers(struct uvc_video_queue *queue,
 	return ret ? ret : rb->count;
 }
 
-static int uvc_query_buffer(struct uvc_video_queue *queue,
-			    struct v4l2_buffer *buf)
+int uvcg_query_buffer(struct uvc_video_queue *queue, struct v4l2_buffer *buf)
 {
 	int ret;
 
@@ -188,8 +186,7 @@ static int uvc_query_buffer(struct uvc_video_queue *queue,
 	return ret;
 }
 
-static int uvc_queue_buffer(struct uvc_video_queue *queue,
-			    struct v4l2_buffer *buf)
+int uvcg_queue_buffer(struct uvc_video_queue *queue, struct v4l2_buffer *buf)
 {
 	unsigned long flags;
 	int ret;
@@ -213,8 +210,8 @@ done:
  * Dequeue a video buffer. If nonblocking is false, block until a buffer is
  * available.
  */
-static int uvc_dequeue_buffer(struct uvc_video_queue *queue,
-			      struct v4l2_buffer *buf, int nonblocking)
+int uvcg_dequeue_buffer(struct uvc_video_queue *queue, struct v4l2_buffer *buf,
+			int nonblocking)
 {
 	int ret;
 
@@ -231,8 +228,8 @@ static int uvc_dequeue_buffer(struct uvc_video_queue *queue,
  * This function implements video queue polling and is intended to be used by
  * the device poll handler.
  */
-static unsigned int uvc_queue_poll(struct uvc_video_queue *queue,
-				   struct file *file, poll_table *wait)
+unsigned int uvcg_queue_poll(struct uvc_video_queue *queue, struct file *file,
+			     poll_table *wait)
 {
 	unsigned int ret;
 
@@ -243,8 +240,7 @@ static unsigned int uvc_queue_poll(struct uvc_video_queue *queue,
 	return ret;
 }
 
-static int uvc_queue_mmap(struct uvc_video_queue *queue,
-			  struct vm_area_struct *vma)
+int uvcg_queue_mmap(struct uvc_video_queue *queue, struct vm_area_struct *vma)
 {
 	int ret;
 
@@ -261,8 +257,8 @@ static int uvc_queue_mmap(struct uvc_video_queue *queue,
  *
  * NO-MMU arch need this function to make mmap() work correctly.
  */
-static unsigned long uvc_queue_get_unmapped_area(struct uvc_video_queue *queue,
-		unsigned long pgoff)
+unsigned long uvcg_queue_get_unmapped_area(struct uvc_video_queue *queue,
+					   unsigned long pgoff)
 {
 	unsigned long ret;
 
@@ -285,7 +281,7 @@ static unsigned long uvc_queue_get_unmapped_area(struct uvc_video_queue *queue,
  * This function acquires the irq spinlock and can be called from interrupt
  * context.
  */
-static void uvc_queue_cancel(struct uvc_video_queue *queue, int disconnect)
+void uvcg_queue_cancel(struct uvc_video_queue *queue, int disconnect)
 {
 	struct uvc_buffer *buf;
 	unsigned long flags;
@@ -324,9 +320,9 @@ static void uvc_queue_cancel(struct uvc_video_queue *queue, int disconnect)
  * the main queue.
  *
  * This function can't be called from interrupt context. Use
- * uvc_queue_cancel() instead.
+ * uvcg_queue_cancel() instead.
  */
-static int uvc_queue_enable(struct uvc_video_queue *queue, int enable)
+int uvcg_queue_enable(struct uvc_video_queue *queue, int enable)
 {
 	unsigned long flags;
 	int ret = 0;
@@ -363,8 +359,8 @@ done:
 }
 
 /* called with &queue_irqlock held.. */
-static struct uvc_buffer *uvc_queue_next_buffer(struct uvc_video_queue *queue,
-						struct uvc_buffer *buf)
+struct uvc_buffer *uvcg_queue_next_buffer(struct uvc_video_queue *queue,
+					  struct uvc_buffer *buf)
 {
 	struct uvc_buffer *nextbuf;
 
@@ -392,7 +388,7 @@ static struct uvc_buffer *uvc_queue_next_buffer(struct uvc_video_queue *queue,
 	return nextbuf;
 }
 
-static struct uvc_buffer *uvc_queue_head(struct uvc_video_queue *queue)
+struct uvc_buffer *uvcg_queue_head(struct uvc_video_queue *queue)
 {
 	struct uvc_buffer *buf = NULL;
 
diff --git a/drivers/usb/gadget/function/uvc_queue.h b/drivers/usb/gadget/function/uvc_queue.h
index 8e76ce982f1e..03919c724961 100644
--- a/drivers/usb/gadget/function/uvc_queue.h
+++ b/drivers/usb/gadget/function/uvc_queue.h
@@ -57,6 +57,39 @@ static inline int uvc_queue_streaming(struct uvc_video_queue *queue)
 	return vb2_is_streaming(&queue->queue);
 }
 
+int uvcg_queue_init(struct uvc_video_queue *queue, enum v4l2_buf_type type);
+
+void uvcg_free_buffers(struct uvc_video_queue *queue);
+
+int uvcg_alloc_buffers(struct uvc_video_queue *queue,
+		       struct v4l2_requestbuffers *rb);
+
+int uvcg_query_buffer(struct uvc_video_queue *queue, struct v4l2_buffer *buf);
+
+int uvcg_queue_buffer(struct uvc_video_queue *queue, struct v4l2_buffer *buf);
+
+int uvcg_dequeue_buffer(struct uvc_video_queue *queue,
+			struct v4l2_buffer *buf, int nonblocking);
+
+unsigned int uvcg_queue_poll(struct uvc_video_queue *queue,
+			     struct file *file, poll_table *wait);
+
+int uvcg_queue_mmap(struct uvc_video_queue *queue, struct vm_area_struct *vma);
+
+#ifndef CONFIG_MMU
+unsigned long uvcg_queue_get_unmapped_area(struct uvc_video_queue *queue,
+					   unsigned long pgoff);
+#endif /* CONFIG_MMU */
+
+void uvcg_queue_cancel(struct uvc_video_queue *queue, int disconnect);
+
+int uvcg_queue_enable(struct uvc_video_queue *queue, int enable);
+
+struct uvc_buffer *uvcg_queue_next_buffer(struct uvc_video_queue *queue,
+					  struct uvc_buffer *buf);
+
+struct uvc_buffer *uvcg_queue_head(struct uvc_video_queue *queue);
+
 #endif /* __KERNEL__ */
 
 #endif /* _UVC_QUEUE_H_ */
diff --git a/drivers/usb/gadget/function/uvc_v4l2.c b/drivers/usb/gadget/function/uvc_v4l2.c
index ad48e81155e2..5aad7fededa5 100644
--- a/drivers/usb/gadget/function/uvc_v4l2.c
+++ b/drivers/usb/gadget/function/uvc_v4l2.c
@@ -23,8 +23,10 @@
 #include <media/v4l2-event.h>
 #include <media/v4l2-ioctl.h>
 
+#include "f_uvc.h"
 #include "uvc.h"
 #include "uvc_queue.h"
+#include "uvc_video.h"
 
 /* --------------------------------------------------------------------------
  * Requests handling
@@ -48,7 +50,7 @@ uvc_send_response(struct uvc_device *uvc, struct uvc_request_data *data)
 }
 
 /* --------------------------------------------------------------------------
- * V4L2
+ * V4L2 ioctls
  */
 
 struct uvc_format
@@ -63,8 +65,29 @@ static struct uvc_format uvc_formats[] = {
 };
 
 static int
-uvc_v4l2_get_format(struct uvc_video *video, struct v4l2_format *fmt)
+uvc_v4l2_querycap(struct file *file, void *fh, struct v4l2_capability *cap)
 {
+	struct video_device *vdev = video_devdata(file);
+	struct uvc_device *uvc = video_get_drvdata(vdev);
+	struct usb_composite_dev *cdev = uvc->func.config->cdev;
+
+	strlcpy(cap->driver, "g_uvc", sizeof(cap->driver));
+	strlcpy(cap->card, cdev->gadget->name, sizeof(cap->card));
+	strlcpy(cap->bus_info, dev_name(&cdev->gadget->dev),
+		sizeof(cap->bus_info));
+
+	cap->capabilities = V4L2_CAP_VIDEO_OUTPUT | V4L2_CAP_STREAMING;
+
+	return 0;
+}
+
+static int
+uvc_v4l2_get_format(struct file *file, void *fh, struct v4l2_format *fmt)
+{
+	struct video_device *vdev = video_devdata(file);
+	struct uvc_device *uvc = video_get_drvdata(vdev);
+	struct uvc_video *video = &uvc->video;
+
 	fmt->fmt.pix.pixelformat = video->fcc;
 	fmt->fmt.pix.width = video->width;
 	fmt->fmt.pix.height = video->height;
@@ -78,8 +101,11 @@ uvc_v4l2_get_format(struct uvc_video *video, struct v4l2_format *fmt)
 }
 
 static int
-uvc_v4l2_set_format(struct uvc_video *video, struct v4l2_format *fmt)
+uvc_v4l2_set_format(struct file *file, void *fh, struct v4l2_format *fmt)
 {
+	struct video_device *vdev = video_devdata(file);
+	struct uvc_device *uvc = video_get_drvdata(vdev);
+	struct uvc_video *video = &uvc->video;
 	struct uvc_format *format;
 	unsigned int imagesize;
 	unsigned int bpl;
@@ -116,209 +142,184 @@ uvc_v4l2_set_format(struct uvc_video *video, struct v4l2_format *fmt)
 }
 
 static int
-uvc_v4l2_open(struct file *file)
+uvc_v4l2_reqbufs(struct file *file, void *fh, struct v4l2_requestbuffers *b)
 {
 	struct video_device *vdev = video_devdata(file);
 	struct uvc_device *uvc = video_get_drvdata(vdev);
-	struct uvc_file_handle *handle;
-
-	handle = kzalloc(sizeof(*handle), GFP_KERNEL);
-	if (handle == NULL)
-		return -ENOMEM;
-
-	v4l2_fh_init(&handle->vfh, vdev);
-	v4l2_fh_add(&handle->vfh);
+	struct uvc_video *video = &uvc->video;
 
-	handle->device = &uvc->video;
-	file->private_data = &handle->vfh;
+	if (b->type != video->queue.queue.type)
+		return -EINVAL;
 
-	uvc_function_connect(uvc);
-	return 0;
+	return uvcg_alloc_buffers(&video->queue, b);
 }
 
 static int
-uvc_v4l2_release(struct file *file)
+uvc_v4l2_querybuf(struct file *file, void *fh, struct v4l2_buffer *b)
 {
 	struct video_device *vdev = video_devdata(file);
 	struct uvc_device *uvc = video_get_drvdata(vdev);
-	struct uvc_file_handle *handle = to_uvc_file_handle(file->private_data);
-	struct uvc_video *video = handle->device;
-
-	uvc_function_disconnect(uvc);
-
-	uvc_video_enable(video, 0);
-	uvc_free_buffers(&video->queue);
-
-	file->private_data = NULL;
-	v4l2_fh_del(&handle->vfh);
-	v4l2_fh_exit(&handle->vfh);
-	kfree(handle);
+	struct uvc_video *video = &uvc->video;
 
-	return 0;
+	return uvcg_query_buffer(&video->queue, b);
 }
 
-static long
-uvc_v4l2_do_ioctl(struct file *file, unsigned int cmd, void *arg)
+static int
+uvc_v4l2_qbuf(struct file *file, void *fh, struct v4l2_buffer *b)
 {
 	struct video_device *vdev = video_devdata(file);
 	struct uvc_device *uvc = video_get_drvdata(vdev);
-	struct uvc_file_handle *handle = to_uvc_file_handle(file->private_data);
-	struct usb_composite_dev *cdev = uvc->func.config->cdev;
 	struct uvc_video *video = &uvc->video;
-	int ret = 0;
-
-	switch (cmd) {
-	/* Query capabilities */
-	case VIDIOC_QUERYCAP:
-	{
-		struct v4l2_capability *cap = arg;
-
-		memset(cap, 0, sizeof *cap);
-		strlcpy(cap->driver, "g_uvc", sizeof(cap->driver));
-		strlcpy(cap->card, cdev->gadget->name, sizeof(cap->card));
-		strlcpy(cap->bus_info, dev_name(&cdev->gadget->dev),
-			sizeof cap->bus_info);
-		cap->version = DRIVER_VERSION_NUMBER;
-		cap->capabilities = V4L2_CAP_VIDEO_OUTPUT | V4L2_CAP_STREAMING;
-		break;
-	}
-
-	/* Get & Set format */
-	case VIDIOC_G_FMT:
-	{
-		struct v4l2_format *fmt = arg;
+	int ret;
 
-		if (fmt->type != video->queue.queue.type)
-			return -EINVAL;
+	ret = uvcg_queue_buffer(&video->queue, b);
+	if (ret < 0)
+		return ret;
 
-		return uvc_v4l2_get_format(video, fmt);
-	}
+	return uvcg_video_pump(video);
+}
 
-	case VIDIOC_S_FMT:
-	{
-		struct v4l2_format *fmt = arg;
+static int
+uvc_v4l2_dqbuf(struct file *file, void *fh, struct v4l2_buffer *b)
+{
+	struct video_device *vdev = video_devdata(file);
+	struct uvc_device *uvc = video_get_drvdata(vdev);
+	struct uvc_video *video = &uvc->video;
 
-		if (fmt->type != video->queue.queue.type)
-			return -EINVAL;
+	return uvcg_dequeue_buffer(&video->queue, b, file->f_flags & O_NONBLOCK);
+}
 
-		return uvc_v4l2_set_format(video, fmt);
-	}
+static int
+uvc_v4l2_streamon(struct file *file, void *fh, enum v4l2_buf_type type)
+{
+	struct video_device *vdev = video_devdata(file);
+	struct uvc_device *uvc = video_get_drvdata(vdev);
+	struct uvc_video *video = &uvc->video;
+	int ret;
 
-	/* Buffers & streaming */
-	case VIDIOC_REQBUFS:
-	{
-		struct v4l2_requestbuffers *rb = arg;
+	if (type != video->queue.queue.type)
+		return -EINVAL;
 
-		if (rb->type != video->queue.queue.type)
-			return -EINVAL;
+	/* Enable UVC video. */
+	ret = uvcg_video_enable(video, 1);
+	if (ret < 0)
+		return ret;
 
-		ret = uvc_alloc_buffers(&video->queue, rb);
-		if (ret < 0)
-			return ret;
+	/*
+	 * Complete the alternate setting selection setup phase now that
+	 * userspace is ready to provide video frames.
+	 */
+	uvc_function_setup_continue(uvc);
+	uvc->state = UVC_STATE_STREAMING;
 
-		ret = 0;
-		break;
-	}
-
-	case VIDIOC_QUERYBUF:
-	{
-		struct v4l2_buffer *buf = arg;
+	return 0;
+}
 
-		return uvc_query_buffer(&video->queue, buf);
-	}
+static int
+uvc_v4l2_streamoff(struct file *file, void *fh, enum v4l2_buf_type type)
+{
+	struct video_device *vdev = video_devdata(file);
+	struct uvc_device *uvc = video_get_drvdata(vdev);
+	struct uvc_video *video = &uvc->video;
 
-	case VIDIOC_QBUF:
-		if ((ret = uvc_queue_buffer(&video->queue, arg)) < 0)
-			return ret;
+	if (type != video->queue.queue.type)
+		return -EINVAL;
 
-		return uvc_video_pump(video);
+	return uvcg_video_enable(video, 0);
+}
 
-	case VIDIOC_DQBUF:
-		return uvc_dequeue_buffer(&video->queue, arg,
-			file->f_flags & O_NONBLOCK);
+static int
+uvc_v4l2_subscribe_event(struct v4l2_fh *fh,
+			 const struct v4l2_event_subscription *sub)
+{
+	if (sub->type < UVC_EVENT_FIRST || sub->type > UVC_EVENT_LAST)
+		return -EINVAL;
 
-	case VIDIOC_STREAMON:
-	{
-		int *type = arg;
+	return v4l2_event_subscribe(fh, sub, 2, NULL);
+}
 
-		if (*type != video->queue.queue.type)
-			return -EINVAL;
+static int
+uvc_v4l2_unsubscribe_event(struct v4l2_fh *fh,
+			   const struct v4l2_event_subscription *sub)
+{
+	return v4l2_event_unsubscribe(fh, sub);
+}
 
-		/* Enable UVC video. */
-		ret = uvc_video_enable(video, 1);
-		if (ret < 0)
-			return ret;
+static long
+uvc_v4l2_ioctl_default(struct file *file, void *fh, bool valid_prio,
+		       unsigned int cmd, void *arg)
+{
+	struct video_device *vdev = video_devdata(file);
+	struct uvc_device *uvc = video_get_drvdata(vdev);
 
-		/*
-		 * Complete the alternate setting selection setup phase now that
-		 * userspace is ready to provide video frames.
-		 */
-		uvc_function_setup_continue(uvc);
-		uvc->state = UVC_STATE_STREAMING;
+	switch (cmd) {
+	case UVCIOC_SEND_RESPONSE:
+		return uvc_send_response(uvc, arg);
 
-		return 0;
+	default:
+		return -ENOIOCTLCMD;
 	}
+}
 
-	case VIDIOC_STREAMOFF:
-	{
-		int *type = arg;
-
-		if (*type != video->queue.queue.type)
-			return -EINVAL;
+const struct v4l2_ioctl_ops uvc_v4l2_ioctl_ops = {
+	.vidioc_querycap = uvc_v4l2_querycap,
+	.vidioc_g_fmt_vid_out = uvc_v4l2_get_format,
+	.vidioc_s_fmt_vid_out = uvc_v4l2_set_format,
+	.vidioc_reqbufs = uvc_v4l2_reqbufs,
+	.vidioc_querybuf = uvc_v4l2_querybuf,
+	.vidioc_qbuf = uvc_v4l2_qbuf,
+	.vidioc_dqbuf = uvc_v4l2_dqbuf,
+	.vidioc_streamon = uvc_v4l2_streamon,
+	.vidioc_streamoff = uvc_v4l2_streamoff,
+	.vidioc_subscribe_event = uvc_v4l2_subscribe_event,
+	.vidioc_unsubscribe_event = uvc_v4l2_unsubscribe_event,
+	.vidioc_default = uvc_v4l2_ioctl_default,
+};
 
-		return uvc_video_enable(video, 0);
-	}
+/* --------------------------------------------------------------------------
+ * V4L2
+ */
 
-	/* Events */
-	case VIDIOC_DQEVENT:
-	{
-		struct v4l2_event *event = arg;
-
-		ret = v4l2_event_dequeue(&handle->vfh, event,
-					 file->f_flags & O_NONBLOCK);
-		if (ret == 0 && event->type == UVC_EVENT_SETUP) {
-			struct uvc_event *uvc_event = (void *)&event->u.data;
-
-			/* Tell the complete callback to generate an event for
-			 * the next request that will be enqueued by
-			 * uvc_event_write.
-			 */
-			uvc->event_setup_out =
-				!(uvc_event->req.bRequestType & USB_DIR_IN);
-			uvc->event_length = uvc_event->req.wLength;
-		}
+static int
+uvc_v4l2_open(struct file *file)
+{
+	struct video_device *vdev = video_devdata(file);
+	struct uvc_device *uvc = video_get_drvdata(vdev);
+	struct uvc_file_handle *handle;
 
-		return ret;
-	}
+	handle = kzalloc(sizeof(*handle), GFP_KERNEL);
+	if (handle == NULL)
+		return -ENOMEM;
 
-	case VIDIOC_SUBSCRIBE_EVENT:
-	{
-		struct v4l2_event_subscription *sub = arg;
+	v4l2_fh_init(&handle->vfh, vdev);
+	v4l2_fh_add(&handle->vfh);
 
-		if (sub->type < UVC_EVENT_FIRST || sub->type > UVC_EVENT_LAST)
-			return -EINVAL;
+	handle->device = &uvc->video;
+	file->private_data = &handle->vfh;
 
-		return v4l2_event_subscribe(&handle->vfh, arg, 2, NULL);
-	}
+	uvc_function_connect(uvc);
+	return 0;
+}
 
-	case VIDIOC_UNSUBSCRIBE_EVENT:
-		return v4l2_event_unsubscribe(&handle->vfh, arg);
+static int
+uvc_v4l2_release(struct file *file)
+{
+	struct video_device *vdev = video_devdata(file);
+	struct uvc_device *uvc = video_get_drvdata(vdev);
+	struct uvc_file_handle *handle = to_uvc_file_handle(file->private_data);
+	struct uvc_video *video = handle->device;
 
-	case UVCIOC_SEND_RESPONSE:
-		ret = uvc_send_response(uvc, arg);
-		break;
+	uvc_function_disconnect(uvc);
 
-	default:
-		return -ENOIOCTLCMD;
-	}
+	uvcg_video_enable(video, 0);
+	uvcg_free_buffers(&video->queue);
 
-	return ret;
-}
+	file->private_data = NULL;
+	v4l2_fh_del(&handle->vfh);
+	v4l2_fh_exit(&handle->vfh);
+	kfree(handle);
 
-static long
-uvc_v4l2_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
-{
-	return video_usercopy(file, cmd, arg, uvc_v4l2_do_ioctl);
+	return 0;
 }
 
 static int
@@ -327,7 +328,7 @@ uvc_v4l2_mmap(struct file *file, struct vm_area_struct *vma)
 	struct video_device *vdev = video_devdata(file);
 	struct uvc_device *uvc = video_get_drvdata(vdev);
 
-	return uvc_queue_mmap(&uvc->video.queue, vma);
+	return uvcg_queue_mmap(&uvc->video.queue, vma);
 }
 
 static unsigned int
@@ -336,30 +337,30 @@ uvc_v4l2_poll(struct file *file, poll_table *wait)
 	struct video_device *vdev = video_devdata(file);
 	struct uvc_device *uvc = video_get_drvdata(vdev);
 
-	return uvc_queue_poll(&uvc->video.queue, file, wait);
+	return uvcg_queue_poll(&uvc->video.queue, file, wait);
 }
 
 #ifndef CONFIG_MMU
-static unsigned long uvc_v4l2_get_unmapped_area(struct file *file,
+static unsigned long uvcg_v4l2_get_unmapped_area(struct file *file,
 		unsigned long addr, unsigned long len, unsigned long pgoff,
 		unsigned long flags)
 {
 	struct video_device *vdev = video_devdata(file);
 	struct uvc_device *uvc = video_get_drvdata(vdev);
 
-	return uvc_queue_get_unmapped_area(&uvc->video.queue, pgoff);
+	return uvcg_queue_get_unmapped_area(&uvc->video.queue, pgoff);
 }
 #endif
 
-static struct v4l2_file_operations uvc_v4l2_fops = {
+struct v4l2_file_operations uvc_v4l2_fops = {
 	.owner		= THIS_MODULE,
 	.open		= uvc_v4l2_open,
 	.release	= uvc_v4l2_release,
-	.ioctl		= uvc_v4l2_ioctl,
+	.ioctl		= video_ioctl2,
 	.mmap		= uvc_v4l2_mmap,
 	.poll		= uvc_v4l2_poll,
 #ifndef CONFIG_MMU
-	.get_unmapped_area = uvc_v4l2_get_unmapped_area,
+	.get_unmapped_area = uvcg_v4l2_get_unmapped_area,
 #endif
 };
 
diff --git a/drivers/usb/gadget/function/uvc_v4l2.h b/drivers/usb/gadget/function/uvc_v4l2.h
new file mode 100644
index 000000000000..2683b92fda65
--- /dev/null
+++ b/drivers/usb/gadget/function/uvc_v4l2.h
@@ -0,0 +1,22 @@
+/*
+ *	uvc_v4l2.h  --  USB Video Class Gadget driver
+ *
+ * Copyright (C) 2009-2010
+ *		Laurent Pinchart (laurent.pinchart@ideasonboard.com)
+ *
+ * Copyright (c) 2013 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *		Author: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __UVC_V4L2_H__
+#define __UVC_V4L2_H__
+
+extern const struct v4l2_ioctl_ops uvc_v4l2_ioctl_ops;
+extern struct v4l2_file_operations uvc_v4l2_fops;
+
+#endif /* __UVC_V4L2_H__ */
diff --git a/drivers/usb/gadget/function/uvc_video.c b/drivers/usb/gadget/function/uvc_video.c
index a5eb9a3fbb7a..c3e1f27dbbef 100644
--- a/drivers/usb/gadget/function/uvc_video.c
+++ b/drivers/usb/gadget/function/uvc_video.c
@@ -15,6 +15,7 @@
 #include <linux/errno.h>
 #include <linux/usb/ch9.h>
 #include <linux/usb/gadget.h>
+#include <linux/usb/video.h>
 
 #include <media/v4l2-dev.h>
 
@@ -85,7 +86,7 @@ uvc_video_encode_bulk(struct usb_request *req, struct uvc_video *video,
 	if (buf->bytesused == video->queue.buf_used) {
 		video->queue.buf_used = 0;
 		buf->state = UVC_BUF_STATE_DONE;
-		uvc_queue_next_buffer(&video->queue, buf);
+		uvcg_queue_next_buffer(&video->queue, buf);
 		video->fid ^= UVC_STREAM_FID;
 
 		video->payload_size = 0;
@@ -118,7 +119,7 @@ uvc_video_encode_isoc(struct usb_request *req, struct uvc_video *video,
 	if (buf->bytesused == video->queue.buf_used) {
 		video->queue.buf_used = 0;
 		buf->state = UVC_BUF_STATE_DONE;
-		uvc_queue_next_buffer(&video->queue, buf);
+		uvcg_queue_next_buffer(&video->queue, buf);
 		video->fid ^= UVC_STREAM_FID;
 	}
 }
@@ -171,19 +172,19 @@ uvc_video_complete(struct usb_ep *ep, struct usb_request *req)
 		break;
 
 	case -ESHUTDOWN:	/* disconnect from host. */
-		printk(KERN_INFO "VS request cancelled.\n");
-		uvc_queue_cancel(queue, 1);
+		printk(KERN_DEBUG "VS request cancelled.\n");
+		uvcg_queue_cancel(queue, 1);
 		goto requeue;
 
 	default:
 		printk(KERN_INFO "VS request completed with status %d.\n",
 			req->status);
-		uvc_queue_cancel(queue, 0);
+		uvcg_queue_cancel(queue, 0);
 		goto requeue;
 	}
 
 	spin_lock_irqsave(&video->queue.irqlock, flags);
-	buf = uvc_queue_head(&video->queue);
+	buf = uvcg_queue_head(&video->queue);
 	if (buf == NULL) {
 		spin_unlock_irqrestore(&video->queue.irqlock, flags);
 		goto requeue;
@@ -195,7 +196,7 @@ uvc_video_complete(struct usb_ep *ep, struct usb_request *req)
 		printk(KERN_INFO "Failed to queue request (%d).\n", ret);
 		usb_ep_set_halt(ep);
 		spin_unlock_irqrestore(&video->queue.irqlock, flags);
-		uvc_queue_cancel(queue, 0);
+		uvcg_queue_cancel(queue, 0);
 		goto requeue;
 	}
 	spin_unlock_irqrestore(&video->queue.irqlock, flags);
@@ -274,13 +275,12 @@ error:
  */
 
 /*
- * uvc_video_pump - Pump video data into the USB requests
+ * uvcg_video_pump - Pump video data into the USB requests
  *
  * This function fills the available USB requests (listed in req_free) with
  * video data from the queued buffers.
  */
-static int
-uvc_video_pump(struct uvc_video *video)
+int uvcg_video_pump(struct uvc_video *video)
 {
 	struct uvc_video_queue *queue = &video->queue;
 	struct usb_request *req;
@@ -288,7 +288,7 @@ uvc_video_pump(struct uvc_video *video)
 	unsigned long flags;
 	int ret;
 
-	/* FIXME TODO Race between uvc_video_pump and requests completion
+	/* FIXME TODO Race between uvcg_video_pump and requests completion
 	 * handler ???
 	 */
 
@@ -309,10 +309,10 @@ uvc_video_pump(struct uvc_video *video)
 		/* Retrieve the first available video buffer and fill the
 		 * request, protected by the video queue irqlock.
 		 */
-		spin_lock_irqsave(&video->queue.irqlock, flags);
-		buf = uvc_queue_head(&video->queue);
+		spin_lock_irqsave(&queue->irqlock, flags);
+		buf = uvcg_queue_head(queue);
 		if (buf == NULL) {
-			spin_unlock_irqrestore(&video->queue.irqlock, flags);
+			spin_unlock_irqrestore(&queue->irqlock, flags);
 			break;
 		}
 
@@ -323,11 +323,11 @@ uvc_video_pump(struct uvc_video *video)
 		if (ret < 0) {
 			printk(KERN_INFO "Failed to queue request (%d)\n", ret);
 			usb_ep_set_halt(video->ep);
-			spin_unlock_irqrestore(&video->queue.irqlock, flags);
-			uvc_queue_cancel(queue, 0);
+			spin_unlock_irqrestore(&queue->irqlock, flags);
+			uvcg_queue_cancel(queue, 0);
 			break;
 		}
-		spin_unlock_irqrestore(&video->queue.irqlock, flags);
+		spin_unlock_irqrestore(&queue->irqlock, flags);
 	}
 
 	spin_lock_irqsave(&video->req_lock, flags);
@@ -339,8 +339,7 @@ uvc_video_pump(struct uvc_video *video)
 /*
  * Enable or disable the video stream.
  */
-static int
-uvc_video_enable(struct uvc_video *video, int enable)
+int uvcg_video_enable(struct uvc_video *video, int enable)
 {
 	unsigned int i;
 	int ret;
@@ -356,11 +355,11 @@ uvc_video_enable(struct uvc_video *video, int enable)
 			usb_ep_dequeue(video->ep, video->req[i]);
 
 		uvc_video_free_requests(video);
-		uvc_queue_enable(&video->queue, 0);
+		uvcg_queue_enable(&video->queue, 0);
 		return 0;
 	}
 
-	if ((ret = uvc_queue_enable(&video->queue, 1)) < 0)
+	if ((ret = uvcg_queue_enable(&video->queue, 1)) < 0)
 		return ret;
 
 	if ((ret = uvc_video_alloc_requests(video)) < 0)
@@ -372,14 +371,13 @@ uvc_video_enable(struct uvc_video *video, int enable)
 	} else
 		video->encode = uvc_video_encode_isoc;
 
-	return uvc_video_pump(video);
+	return uvcg_video_pump(video);
 }
 
 /*
  * Initialize the UVC video stream.
  */
-static int
-uvc_video_init(struct uvc_video *video)
+int uvcg_video_init(struct uvc_video *video)
 {
 	INIT_LIST_HEAD(&video->req_free);
 	spin_lock_init(&video->req_lock);
@@ -391,7 +389,7 @@ uvc_video_init(struct uvc_video *video)
 	video->imagesize = 320 * 240 * 2;
 
 	/* Initialize the video buffers queue. */
-	uvc_queue_init(&video->queue, V4L2_BUF_TYPE_VIDEO_OUTPUT);
+	uvcg_queue_init(&video->queue, V4L2_BUF_TYPE_VIDEO_OUTPUT);
 	return 0;
 }
 
diff --git a/drivers/usb/gadget/function/uvc_video.h b/drivers/usb/gadget/function/uvc_video.h
new file mode 100644
index 000000000000..ef00f06fa00b
--- /dev/null
+++ b/drivers/usb/gadget/function/uvc_video.h
@@ -0,0 +1,24 @@
+/*
+ *	uvc_video.h  --  USB Video Class Gadget driver
+ *
+ * Copyright (C) 2009-2010
+ *		Laurent Pinchart (laurent.pinchart@ideasonboard.com)
+ *
+ * Copyright (c) 2013 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *		Author: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __UVC_VIDEO_H__
+#define __UVC_VIDEO_H__
+
+int uvcg_video_pump(struct uvc_video *video);
+
+int uvcg_video_enable(struct uvc_video *video, int enable);
+
+int uvcg_video_init(struct uvc_video *video);
+
+#endif /* __UVC_VIDEO_H__ */
diff --git a/drivers/usb/gadget/legacy/Kconfig b/drivers/usb/gadget/legacy/Kconfig
index aa376f006333..24392d269709 100644
--- a/drivers/usb/gadget/legacy/Kconfig
+++ b/drivers/usb/gadget/legacy/Kconfig
@@ -54,6 +54,8 @@ config USB_AUDIO
 	depends on SND
 	select USB_LIBCOMPOSITE
 	select SND_PCM
+	select USB_F_UAC1 if GADGET_UAC1
+	select USB_F_UAC2 if !GADGET_UAC1
 	help
 	  This Gadget Audio driver is compatible with USB Audio Class
 	  specification 2.0. It implements 1 AudioControl interface,
@@ -466,6 +468,7 @@ config USB_G_WEBCAM
 	depends on VIDEO_DEV
 	select USB_LIBCOMPOSITE
 	select VIDEOBUF2_VMALLOC
+	select USB_F_UVC
 	help
 	  The Webcam Gadget acts as a composite USB Audio and Video Class
 	  device. It provides a userspace API to process UVC control requests
diff --git a/drivers/usb/gadget/legacy/Makefile b/drivers/usb/gadget/legacy/Makefile
index edba2d1ee0f3..7f485f25705e 100644
--- a/drivers/usb/gadget/legacy/Makefile
+++ b/drivers/usb/gadget/legacy/Makefile
@@ -2,9 +2,9 @@
 # USB gadget drivers
 #
 
-ccflags-y			:= -Idrivers/usb/gadget/
-ccflags-y			+= -Idrivers/usb/gadget/udc/
-ccflags-y			+= -Idrivers/usb/gadget/function/
+ccflags-y			:= -I$(srctree)/drivers/usb/gadget/
+ccflags-y			+= -I$(srctree)/drivers/usb/gadget/udc/
+ccflags-y			+= -I$(srctree)/drivers/usb/gadget/function/
 
 g_zero-y			:= zero.o
 g_audio-y			:= audio.o
diff --git a/drivers/usb/gadget/legacy/audio.c b/drivers/usb/gadget/legacy/audio.c
index 6eb695e5e43a..f46a3956e43d 100644
--- a/drivers/usb/gadget/legacy/audio.c
+++ b/drivers/usb/gadget/legacy/audio.c
@@ -21,6 +21,66 @@
 
 USB_GADGET_COMPOSITE_OPTIONS();
 
+#ifndef CONFIG_GADGET_UAC1
+#include "u_uac2.h"
+
+/* Playback(USB-IN) Default Stereo - Fl/Fr */
+static int p_chmask = UAC2_DEF_PCHMASK;
+module_param(p_chmask, uint, S_IRUGO);
+MODULE_PARM_DESC(p_chmask, "Playback Channel Mask");
+
+/* Playback Default 48 KHz */
+static int p_srate = UAC2_DEF_PSRATE;
+module_param(p_srate, uint, S_IRUGO);
+MODULE_PARM_DESC(p_srate, "Playback Sampling Rate");
+
+/* Playback Default 16bits/sample */
+static int p_ssize = UAC2_DEF_PSSIZE;
+module_param(p_ssize, uint, S_IRUGO);
+MODULE_PARM_DESC(p_ssize, "Playback Sample Size(bytes)");
+
+/* Capture(USB-OUT) Default Stereo - Fl/Fr */
+static int c_chmask = UAC2_DEF_CCHMASK;
+module_param(c_chmask, uint, S_IRUGO);
+MODULE_PARM_DESC(c_chmask, "Capture Channel Mask");
+
+/* Capture Default 64 KHz */
+static int c_srate = UAC2_DEF_CSRATE;
+module_param(c_srate, uint, S_IRUGO);
+MODULE_PARM_DESC(c_srate, "Capture Sampling Rate");
+
+/* Capture Default 16bits/sample */
+static int c_ssize = UAC2_DEF_CSSIZE;
+module_param(c_ssize, uint, S_IRUGO);
+MODULE_PARM_DESC(c_ssize, "Capture Sample Size(bytes)");
+#else
+#include "u_uac1.h"
+
+static char *fn_play = FILE_PCM_PLAYBACK;
+module_param(fn_play, charp, S_IRUGO);
+MODULE_PARM_DESC(fn_play, "Playback PCM device file name");
+
+static char *fn_cap = FILE_PCM_CAPTURE;
+module_param(fn_cap, charp, S_IRUGO);
+MODULE_PARM_DESC(fn_cap, "Capture PCM device file name");
+
+static char *fn_cntl = FILE_CONTROL;
+module_param(fn_cntl, charp, S_IRUGO);
+MODULE_PARM_DESC(fn_cntl, "Control device file name");
+
+static int req_buf_size = UAC1_OUT_EP_MAX_PACKET_SIZE;
+module_param(req_buf_size, int, S_IRUGO);
+MODULE_PARM_DESC(req_buf_size, "ISO OUT endpoint request buffer size");
+
+static int req_count = UAC1_REQ_COUNT;
+module_param(req_count, int, S_IRUGO);
+MODULE_PARM_DESC(req_count, "ISO OUT endpoint request count");
+
+static int audio_buf_size = UAC1_AUDIO_BUF_SIZE;
+module_param(audio_buf_size, int, S_IRUGO);
+MODULE_PARM_DESC(audio_buf_size, "Audio buffer size");
+#endif
+
 /* string IDs are assigned dynamically */
 
 static struct usb_string strings_dev[] = {
@@ -40,12 +100,12 @@ static struct usb_gadget_strings *audio_strings[] = {
 	NULL,
 };
 
-#ifdef CONFIG_GADGET_UAC1
-#include "u_uac1.h"
-#include "u_uac1.c"
-#include "f_uac1.c"
+#ifndef CONFIG_GADGET_UAC1
+static struct usb_function_instance *fi_uac2;
+static struct usb_function *f_uac2;
 #else
-#include "f_uac2.c"
+static struct usb_function_instance *fi_uac1;
+static struct usb_function *f_uac1;
 #endif
 
 /*-------------------------------------------------------------------------*/
@@ -109,6 +169,8 @@ static const struct usb_descriptor_header *otg_desc[] = {
 
 static int __init audio_do_config(struct usb_configuration *c)
 {
+	int status;
+
 	/* FIXME alloc iConfiguration string, set it in c->strings */
 
 	if (gadget_is_otg(c->cdev->gadget)) {
@@ -116,7 +178,31 @@ static int __init audio_do_config(struct usb_configuration *c)
 		c->bmAttributes |= USB_CONFIG_ATT_WAKEUP;
 	}
 
-	audio_bind_config(c);
+#ifdef CONFIG_GADGET_UAC1
+	f_uac1 = usb_get_function(fi_uac1);
+	if (IS_ERR(f_uac1)) {
+		status = PTR_ERR(f_uac1);
+		return status;
+	}
+
+	status = usb_add_function(c, f_uac1);
+	if (status < 0) {
+		usb_put_function(f_uac1);
+		return status;
+	}
+#else
+	f_uac2 = usb_get_function(fi_uac2);
+	if (IS_ERR(f_uac2)) {
+		status = PTR_ERR(f_uac2);
+		return status;
+	}
+
+	status = usb_add_function(c, f_uac2);
+	if (status < 0) {
+		usb_put_function(f_uac2);
+		return status;
+	}
+#endif
 
 	return 0;
 }
@@ -126,17 +212,47 @@ static struct usb_configuration audio_config_driver = {
 	.bConfigurationValue	= 1,
 	/* .iConfiguration = DYNAMIC */
 	.bmAttributes		= USB_CONFIG_ATT_SELFPOWER,
-#ifndef CONFIG_GADGET_UAC1
-	.unbind			= uac2_unbind_config,
-#endif
 };
 
 /*-------------------------------------------------------------------------*/
 
 static int __init audio_bind(struct usb_composite_dev *cdev)
 {
+#ifndef CONFIG_GADGET_UAC1
+	struct f_uac2_opts	*uac2_opts;
+#else
+	struct f_uac1_opts	*uac1_opts;
+#endif
 	int			status;
 
+#ifndef CONFIG_GADGET_UAC1
+	fi_uac2 = usb_get_function_instance("uac2");
+	if (IS_ERR(fi_uac2))
+		return PTR_ERR(fi_uac2);
+#else
+	fi_uac1 = usb_get_function_instance("uac1");
+	if (IS_ERR(fi_uac1))
+		return PTR_ERR(fi_uac1);
+#endif
+
+#ifndef CONFIG_GADGET_UAC1
+	uac2_opts = container_of(fi_uac2, struct f_uac2_opts, func_inst);
+	uac2_opts->p_chmask = p_chmask;
+	uac2_opts->p_srate = p_srate;
+	uac2_opts->p_ssize = p_ssize;
+	uac2_opts->c_chmask = c_chmask;
+	uac2_opts->c_srate = c_srate;
+	uac2_opts->c_ssize = c_ssize;
+#else
+	uac1_opts = container_of(fi_uac1, struct f_uac1_opts, func_inst);
+	uac1_opts->fn_play = fn_play;
+	uac1_opts->fn_cap = fn_cap;
+	uac1_opts->fn_cntl = fn_cntl;
+	uac1_opts->req_buf_size = req_buf_size;
+	uac1_opts->req_count = req_count;
+	uac1_opts->audio_buf_size = audio_buf_size;
+#endif
+
 	status = usb_string_ids_tab(cdev, strings_dev);
 	if (status < 0)
 		goto fail;
@@ -152,13 +268,26 @@ static int __init audio_bind(struct usb_composite_dev *cdev)
 	return 0;
 
 fail:
+#ifndef CONFIG_GADGET_UAC1
+	usb_put_function_instance(fi_uac2);
+#else
+	usb_put_function_instance(fi_uac1);
+#endif
 	return status;
 }
 
 static int __exit audio_unbind(struct usb_composite_dev *cdev)
 {
 #ifdef CONFIG_GADGET_UAC1
-	gaudio_cleanup();
+	if (!IS_ERR_OR_NULL(f_uac1))
+		usb_put_function(f_uac1);
+	if (!IS_ERR_OR_NULL(fi_uac1))
+		usb_put_function_instance(fi_uac1);
+#else
+	if (!IS_ERR_OR_NULL(f_uac2))
+		usb_put_function(f_uac2);
+	if (!IS_ERR_OR_NULL(fi_uac2))
+		usb_put_function_instance(fi_uac2);
 #endif
 	return 0;
 }
diff --git a/drivers/usb/gadget/legacy/dbgp.c b/drivers/usb/gadget/legacy/dbgp.c
index 225e385a6160..1b075132f8f1 100644
--- a/drivers/usb/gadget/legacy/dbgp.c
+++ b/drivers/usb/gadget/legacy/dbgp.c
@@ -410,6 +410,7 @@ static __refdata struct usb_gadget_driver dbgp_driver = {
 	.bind = dbgp_bind,
 	.unbind = dbgp_unbind,
 	.setup = dbgp_setup,
+	.reset = dbgp_disconnect,
 	.disconnect = dbgp_disconnect,
 	.driver	= {
 		.owner = THIS_MODULE,
diff --git a/drivers/usb/gadget/legacy/inode.c b/drivers/usb/gadget/legacy/inode.c
index e96077b8bf79..edefec2cc584 100644
--- a/drivers/usb/gadget/legacy/inode.c
+++ b/drivers/usb/gadget/legacy/inode.c
@@ -1775,6 +1775,7 @@ static struct usb_gadget_driver gadgetfs_driver = {
 	.bind		= gadgetfs_bind,
 	.unbind		= gadgetfs_unbind,
 	.setup		= gadgetfs_setup,
+	.reset		= gadgetfs_disconnect,
 	.disconnect	= gadgetfs_disconnect,
 	.suspend	= gadgetfs_suspend,
 
diff --git a/drivers/usb/gadget/legacy/webcam.c b/drivers/usb/gadget/legacy/webcam.c
index a11d8e420bfe..04a3da20f742 100644
--- a/drivers/usb/gadget/legacy/webcam.c
+++ b/drivers/usb/gadget/legacy/webcam.c
@@ -12,23 +12,31 @@
 
 #include <linux/kernel.h>
 #include <linux/device.h>
+#include <linux/module.h>
 #include <linux/usb/video.h>
 
-#include "f_uvc.h"
-
-/*
- * Kbuild is not very cooperative with respect to linking separately
- * compiled library objects into one module.  So for now we won't use
- * separate compilation ... ensuring init/exit sections work to shrink
- * the runtime footprint, and giving us at least some parts of what
- * a "gcc --combine ... part1.c part2.c part3.c ... " build would.
- */
-#include "uvc_queue.c"
-#include "uvc_video.c"
-#include "uvc_v4l2.c"
-#include "f_uvc.c"
+#include "u_uvc.h"
 
 USB_GADGET_COMPOSITE_OPTIONS();
+
+/*-------------------------------------------------------------------------*/
+
+/* module parameters specific to the Video streaming endpoint */
+static unsigned int streaming_interval = 1;
+module_param(streaming_interval, uint, S_IRUGO|S_IWUSR);
+MODULE_PARM_DESC(streaming_interval, "1 - 16");
+
+static unsigned int streaming_maxpacket = 1024;
+module_param(streaming_maxpacket, uint, S_IRUGO|S_IWUSR);
+MODULE_PARM_DESC(streaming_maxpacket, "1 - 1023 (FS), 1 - 3072 (hs/ss)");
+
+static unsigned int streaming_maxburst;
+module_param(streaming_maxburst, uint, S_IRUGO|S_IWUSR);
+MODULE_PARM_DESC(streaming_maxburst, "0 - 15 (ss only)");
+
+static unsigned int trace;
+module_param(trace, uint, S_IRUGO|S_IWUSR);
+MODULE_PARM_DESC(trace, "Trace level bitmask");
 /* --------------------------------------------------------------------------
  * Device descriptor
  */
@@ -63,6 +71,9 @@ static struct usb_gadget_strings *webcam_device_strings[] = {
 	NULL,
 };
 
+static struct usb_function_instance *fi_uvc;
+static struct usb_function *f_uvc;
+
 static struct usb_device_descriptor webcam_device_descriptor = {
 	.bLength		= USB_DT_DEVICE_SIZE,
 	.bDescriptorType	= USB_DT_DEVICE,
@@ -326,9 +337,17 @@ static const struct uvc_descriptor_header * const uvc_ss_streaming_cls[] = {
 static int __init
 webcam_config_bind(struct usb_configuration *c)
 {
-	return uvc_bind_config(c, uvc_fs_control_cls, uvc_ss_control_cls,
-		uvc_fs_streaming_cls, uvc_hs_streaming_cls,
-		uvc_ss_streaming_cls);
+	int status = 0;
+
+	f_uvc = usb_get_function(fi_uvc);
+	if (IS_ERR(f_uvc))
+		return PTR_ERR(f_uvc);
+
+	status = usb_add_function(c, f_uvc);
+	if (status < 0)
+		usb_put_function(f_uvc);
+
+	return status;
 }
 
 static struct usb_configuration webcam_config_driver = {
@@ -342,14 +361,36 @@ static struct usb_configuration webcam_config_driver = {
 static int /* __init_or_exit */
 webcam_unbind(struct usb_composite_dev *cdev)
 {
+	if (!IS_ERR_OR_NULL(f_uvc))
+		usb_put_function(f_uvc);
+	if (!IS_ERR_OR_NULL(fi_uvc))
+		usb_put_function_instance(fi_uvc);
 	return 0;
 }
 
 static int __init
 webcam_bind(struct usb_composite_dev *cdev)
 {
+	struct f_uvc_opts *uvc_opts;
 	int ret;
 
+	fi_uvc = usb_get_function_instance("uvc");
+	if (IS_ERR(fi_uvc))
+		return PTR_ERR(fi_uvc);
+
+	uvc_opts = container_of(fi_uvc, struct f_uvc_opts, func_inst);
+
+	uvc_opts->streaming_interval = streaming_interval;
+	uvc_opts->streaming_maxpacket = streaming_maxpacket;
+	uvc_opts->streaming_maxburst = streaming_maxburst;
+	uvc_set_trace_param(trace);
+
+	uvc_opts->fs_control = uvc_fs_control_cls;
+	uvc_opts->ss_control = uvc_ss_control_cls;
+	uvc_opts->fs_streaming = uvc_fs_streaming_cls;
+	uvc_opts->hs_streaming = uvc_hs_streaming_cls;
+	uvc_opts->ss_streaming = uvc_ss_streaming_cls;
+
 	/* Allocate string descriptor numbers ... note that string contents
 	 * can be overridden by the composite_dev glue.
 	 */
@@ -373,7 +414,7 @@ webcam_bind(struct usb_composite_dev *cdev)
 	return 0;
 
 error:
-	webcam_unbind(cdev);
+	usb_put_function_instance(fi_uvc);
 	return ret;
 }
 
diff --git a/drivers/usb/gadget/legacy/zero.c b/drivers/usb/gadget/legacy/zero.c
index c3d496828b74..ebf09f439f3a 100644
--- a/drivers/usb/gadget/legacy/zero.c
+++ b/drivers/usb/gadget/legacy/zero.c
@@ -68,6 +68,8 @@ static struct usb_zero_options gzero_options = {
 	.isoc_maxpacket = GZERO_ISOC_MAXPACKET,
 	.bulk_buflen = GZERO_BULK_BUFLEN,
 	.qlen = GZERO_QLEN,
+	.int_interval = GZERO_INT_INTERVAL,
+	.int_maxpacket = GZERO_INT_MAXPACKET,
 };
 
 /*-------------------------------------------------------------------------*/
@@ -266,6 +268,21 @@ module_param_named(isoc_maxburst, gzero_options.isoc_maxburst, uint,
 		S_IRUGO|S_IWUSR);
 MODULE_PARM_DESC(isoc_maxburst, "0 - 15 (ss only)");
 
+module_param_named(int_interval, gzero_options.int_interval, uint,
+		S_IRUGO|S_IWUSR);
+MODULE_PARM_DESC(int_interval, "1 - 16");
+
+module_param_named(int_maxpacket, gzero_options.int_maxpacket, uint,
+		S_IRUGO|S_IWUSR);
+MODULE_PARM_DESC(int_maxpacket, "0 - 1023 (fs), 0 - 1024 (hs/ss)");
+
+module_param_named(int_mult, gzero_options.int_mult, uint, S_IRUGO|S_IWUSR);
+MODULE_PARM_DESC(int_mult, "0 - 2 (hs/ss only)");
+
+module_param_named(int_maxburst, gzero_options.int_maxburst, uint,
+		S_IRUGO|S_IWUSR);
+MODULE_PARM_DESC(int_maxburst, "0 - 15 (ss only)");
+
 static struct usb_function *func_lb;
 static struct usb_function_instance *func_inst_lb;
 
@@ -301,6 +318,10 @@ static int __init zero_bind(struct usb_composite_dev *cdev)
 	ss_opts->isoc_maxpacket = gzero_options.isoc_maxpacket;
 	ss_opts->isoc_mult = gzero_options.isoc_mult;
 	ss_opts->isoc_maxburst = gzero_options.isoc_maxburst;
+	ss_opts->int_interval = gzero_options.int_interval;
+	ss_opts->int_maxpacket = gzero_options.int_maxpacket;
+	ss_opts->int_mult = gzero_options.int_mult;
+	ss_opts->int_maxburst = gzero_options.int_maxburst;
 	ss_opts->bulk_buflen = gzero_options.bulk_buflen;
 
 	func_ss = usb_get_function(func_inst_ss);
diff --git a/drivers/usb/gadget/udc/Kconfig b/drivers/usb/gadget/udc/Kconfig
index 34ebaa68504c..3ea287b0e448 100644
--- a/drivers/usb/gadget/udc/Kconfig
+++ b/drivers/usb/gadget/udc/Kconfig
@@ -163,7 +163,7 @@ config USB_R8A66597
 
 config USB_RENESAS_USBHS_UDC
 	tristate 'Renesas USBHS controller'
-	depends on USB_RENESAS_USBHS
+	depends on USB_RENESAS_USBHS && HAS_DMA
 	help
 	   Renesas USBHS is a discrete USB host and peripheral controller chip
 	   that supports both full and high speed USB 2.0 data transfers.
@@ -354,6 +354,21 @@ config USB_EG20T
 	  ML7213/ML7831 is completely compatible for Intel EG20T PCH.
 
 	  This driver can be used with Intel's Quark X1000 SOC platform
+
+config USB_GADGET_XILINX
+	tristate "Xilinx USB Driver"
+	depends on OF || COMPILE_TEST
+	help
+	  USB peripheral controller driver for Xilinx USB2 device.
+	  Xilinx USB2 device is a soft IP which supports both full
+	  and high speed USB 2.0 data transfers. It has seven configurable
+	  endpoints(bulk or interrupt or isochronous), as well as
+	  endpoint zero(for control transfers).
+
+	  Say "y" to link the driver statically, or "m" to build a
+	  dynamically linked module called "udc-xilinx" and force all
+	  gadget drivers to also be dynamically linked.
+
 #
 # LAST -- dummy/emulated controller
 #
diff --git a/drivers/usb/gadget/udc/Makefile b/drivers/usb/gadget/udc/Makefile
index 4096122bb283..a7f4491593f1 100644
--- a/drivers/usb/gadget/udc/Makefile
+++ b/drivers/usb/gadget/udc/Makefile
@@ -29,3 +29,4 @@ obj-$(CONFIG_USB_FUSB300)	+= fusb300_udc.o
 obj-$(CONFIG_USB_FOTG210_UDC)	+= fotg210-udc.o
 obj-$(CONFIG_USB_MV_U3D)	+= mv_u3d_core.o
 obj-$(CONFIG_USB_GR_UDC)	+= gr_udc.o
+obj-$(CONFIG_USB_GADGET_XILINX)	+= udc-xilinx.o
diff --git a/drivers/usb/gadget/udc/amd5536udc.c b/drivers/usb/gadget/udc/amd5536udc.c
index 41b062eb4de0..3b9d13848a4f 100644
--- a/drivers/usb/gadget/udc/amd5536udc.c
+++ b/drivers/usb/gadget/udc/amd5536udc.c
@@ -841,7 +841,7 @@ __acquires(ep->dev->lock)
 		&req->req, req->req.length, ep->ep.name, sts);
 
 	spin_unlock(&dev->lock);
-	req->req.complete(&ep->ep, &req->req);
+	usb_gadget_giveback_request(&ep->ep, &req->req);
 	spin_lock(&dev->lock);
 	ep->halted = halted;
 }
diff --git a/drivers/usb/gadget/udc/at91_udc.c b/drivers/usb/gadget/udc/at91_udc.c
index cfd18bcca723..9968f5331fe4 100644
--- a/drivers/usb/gadget/udc/at91_udc.c
+++ b/drivers/usb/gadget/udc/at91_udc.c
@@ -267,7 +267,7 @@ static void done(struct at91_ep *ep, struct at91_request *req, int status)
 
 	ep->stopped = 1;
 	spin_unlock(&udc->lock);
-	req->req.complete(&ep->ep, &req->req);
+	usb_gadget_giveback_request(&ep->ep, &req->req);
 	spin_lock(&udc->lock);
 	ep->stopped = stopped;
 
diff --git a/drivers/usb/gadget/udc/atmel_usba_udc.c b/drivers/usb/gadget/udc/atmel_usba_udc.c
index c9fe67e29d35..1529926e20a0 100644
--- a/drivers/usb/gadget/udc/atmel_usba_udc.c
+++ b/drivers/usb/gadget/udc/atmel_usba_udc.c
@@ -463,7 +463,7 @@ static void receive_data(struct usba_ep *ep)
 			list_del_init(&req->queue);
 			usba_ep_writel(ep, CTL_DIS, USBA_RX_BK_RDY);
 			spin_unlock(&udc->lock);
-			req->req.complete(&ep->ep, &req->req);
+			usb_gadget_giveback_request(&ep->ep, &req->req);
 			spin_lock(&udc->lock);
 		}
 
@@ -495,7 +495,7 @@ request_complete(struct usba_ep *ep, struct usba_request *req, int status)
 		ep->ep.name, req, req->req.status, req->req.actual);
 
 	spin_unlock(&udc->lock);
-	req->req.complete(&ep->ep, &req->req);
+	usb_gadget_giveback_request(&ep->ep, &req->req);
 	spin_lock(&udc->lock);
 }
 
diff --git a/drivers/usb/gadget/udc/bcm63xx_udc.c b/drivers/usb/gadget/udc/bcm63xx_udc.c
index e969eb809a85..2235b8808700 100644
--- a/drivers/usb/gadget/udc/bcm63xx_udc.c
+++ b/drivers/usb/gadget/udc/bcm63xx_udc.c
@@ -1088,7 +1088,7 @@ static int bcm63xx_ep_disable(struct usb_ep *ep)
 			breq->req.status = -ESHUTDOWN;
 
 			spin_unlock_irqrestore(&udc->lock, flags);
-			breq->req.complete(&iudma->bep->ep, &breq->req);
+			usb_gadget_giveback_request(&iudma->bep->ep, &breq->req);
 			spin_lock_irqsave(&udc->lock, flags);
 		}
 	}
diff --git a/drivers/usb/gadget/udc/dummy_hcd.c b/drivers/usb/gadget/udc/dummy_hcd.c
index 2b54955d3166..81dc5959e36b 100644
--- a/drivers/usb/gadget/udc/dummy_hcd.c
+++ b/drivers/usb/gadget/udc/dummy_hcd.c
@@ -258,7 +258,7 @@ static void nuke(struct dummy *dum, struct dummy_ep *ep)
 		req->req.status = -ESHUTDOWN;
 
 		spin_unlock(&dum->lock);
-		req->req.complete(&ep->ep, &req->req);
+		usb_gadget_giveback_request(&ep->ep, &req->req);
 		spin_lock(&dum->lock);
 	}
 }
@@ -658,7 +658,7 @@ static int dummy_queue(struct usb_ep *_ep, struct usb_request *_req,
 		spin_unlock(&dum->lock);
 		_req->actual = _req->length;
 		_req->status = 0;
-		_req->complete(_ep, _req);
+		usb_gadget_giveback_request(_ep, _req);
 		spin_lock(&dum->lock);
 	}  else
 		list_add_tail(&req->queue, &ep->queue);
@@ -702,7 +702,7 @@ static int dummy_dequeue(struct usb_ep *_ep, struct usb_request *_req)
 		dev_dbg(udc_dev(dum),
 				"dequeued req %p from %s, len %d buf %p\n",
 				req, _ep->name, _req->length, _req->buf);
-		_req->complete(_ep, _req);
+		usb_gadget_giveback_request(_ep, _req);
 	}
 	local_irq_restore(flags);
 	return retval;
@@ -1385,7 +1385,7 @@ top:
 			list_del_init(&req->queue);
 
 			spin_unlock(&dum->lock);
-			req->req.complete(&ep->ep, &req->req);
+			usb_gadget_giveback_request(&ep->ep, &req->req);
 			spin_lock(&dum->lock);
 
 			/* requests might have been unlinked... */
@@ -1761,7 +1761,7 @@ restart:
 						req);
 
 				spin_unlock(&dum->lock);
-				req->req.complete(&ep->ep, &req->req);
+				usb_gadget_giveback_request(&ep->ep, &req->req);
 				spin_lock(&dum->lock);
 				ep->already_seen = 0;
 				goto restart;
diff --git a/drivers/usb/gadget/udc/fotg210-udc.c b/drivers/usb/gadget/udc/fotg210-udc.c
index e143d69f6017..1d315921bf34 100644
--- a/drivers/usb/gadget/udc/fotg210-udc.c
+++ b/drivers/usb/gadget/udc/fotg210-udc.c
@@ -70,7 +70,7 @@ static void fotg210_done(struct fotg210_ep *ep, struct fotg210_request *req,
 		req->req.status = status;
 
 	spin_unlock(&ep->fotg210->lock);
-	req->req.complete(&ep->ep, &req->req);
+	usb_gadget_giveback_request(&ep->ep, &req->req);
 	spin_lock(&ep->fotg210->lock);
 
 	if (ep->epnum) {
diff --git a/drivers/usb/gadget/udc/fsl_qe_udc.c b/drivers/usb/gadget/udc/fsl_qe_udc.c
index 732430804841..dd18ea38e391 100644
--- a/drivers/usb/gadget/udc/fsl_qe_udc.c
+++ b/drivers/usb/gadget/udc/fsl_qe_udc.c
@@ -118,10 +118,7 @@ static void done(struct qe_ep *ep, struct qe_req *req, int status)
 	ep->stopped = 1;
 	spin_unlock(&udc->lock);
 
-	/* this complete() should a func implemented by gadget layer,
-	 * eg fsg->bulk_in_complete() */
-	if (req->req.complete)
-		req->req.complete(&ep->ep, &req->req);
+	usb_gadget_giveback_request(&ep->ep, &req->req);
 
 	spin_lock(&udc->lock);
 
@@ -2728,4 +2725,3 @@ module_platform_driver(udc_driver);
 MODULE_DESCRIPTION(DRIVER_DESC);
 MODULE_AUTHOR(DRIVER_AUTHOR);
 MODULE_LICENSE("GPL");
-
diff --git a/drivers/usb/gadget/udc/fsl_udc_core.c b/drivers/usb/gadget/udc/fsl_udc_core.c
index 75b23ea077a7..c3620791a315 100644
--- a/drivers/usb/gadget/udc/fsl_udc_core.c
+++ b/drivers/usb/gadget/udc/fsl_udc_core.c
@@ -197,10 +197,8 @@ __acquires(ep->udc->lock)
 	ep->stopped = 1;
 
 	spin_unlock(&ep->udc->lock);
-	/* complete() is from gadget layer,
-	 * eg fsg->bulk_in_complete() */
-	if (req->req.complete)
-		req->req.complete(&ep->ep, &req->req);
+
+	usb_gadget_giveback_request(&ep->ep, &req->req);
 
 	spin_lock(&ep->udc->lock);
 	ep->stopped = stopped;
diff --git a/drivers/usb/gadget/udc/fusb300_udc.c b/drivers/usb/gadget/udc/fusb300_udc.c
index 5c5d1adda7eb..8286df72add4 100644
--- a/drivers/usb/gadget/udc/fusb300_udc.c
+++ b/drivers/usb/gadget/udc/fusb300_udc.c
@@ -876,7 +876,7 @@ static void done(struct fusb300_ep *ep, struct fusb300_request *req,
 		req->req.status = status;
 
 	spin_unlock(&ep->fusb300->lock);
-	req->req.complete(&ep->ep, &req->req);
+	usb_gadget_giveback_request(&ep->ep, &req->req);
 	spin_lock(&ep->fusb300->lock);
 
 	if (ep->epnum) {
diff --git a/drivers/usb/gadget/udc/goku_udc.c b/drivers/usb/gadget/udc/goku_udc.c
index 6c85839e15ad..bf9c5ef8b56b 100644
--- a/drivers/usb/gadget/udc/goku_udc.c
+++ b/drivers/usb/gadget/udc/goku_udc.c
@@ -320,7 +320,7 @@ done(struct goku_ep *ep, struct goku_request *req, int status)
 	/* don't modify queue heads during completion callback */
 	ep->stopped = 1;
 	spin_unlock(&dev->lock);
-	req->req.complete(&ep->ep, &req->req);
+	usb_gadget_giveback_request(&ep->ep, &req->req);
 	spin_lock(&dev->lock);
 	ep->stopped = stopped;
 }
diff --git a/drivers/usb/gadget/udc/gr_udc.c b/drivers/usb/gadget/udc/gr_udc.c
index 08df5c4f46ce..1b3048a6a2a3 100644
--- a/drivers/usb/gadget/udc/gr_udc.c
+++ b/drivers/usb/gadget/udc/gr_udc.c
@@ -318,8 +318,26 @@ static void gr_finish_request(struct gr_ep *ep, struct gr_request *req,
 	usb_gadget_unmap_request(&dev->gadget, &req->req, ep->is_in);
 	gr_free_dma_desc_chain(dev, req);
 
-	if (ep->is_in) /* For OUT, actual gets updated bit by bit */
+	if (ep->is_in) { /* For OUT, req->req.actual gets updated bit by bit */
 		req->req.actual = req->req.length;
+	} else if (req->oddlen && req->req.actual > req->evenlen) {
+		/*
+		 * Copy to user buffer in this case where length was not evenly
+		 * divisible by ep->ep.maxpacket and the last descriptor was
+		 * actually used.
+		 */
+		char *buftail = ((char *)req->req.buf + req->evenlen);
+
+		memcpy(buftail, ep->tailbuf, req->oddlen);
+
+		if (req->req.actual > req->req.length) {
+			/* We got more data than was requested */
+			dev_dbg(ep->dev->dev, "Overflow for ep %s\n",
+				ep->ep.name);
+			gr_dbgprint_request("OVFL", ep, req);
+			req->req.status = -EOVERFLOW;
+		}
+	}
 
 	if (!status) {
 		if (ep->is_in)
@@ -339,7 +357,7 @@ static void gr_finish_request(struct gr_ep *ep, struct gr_request *req,
 	} else if (req->req.complete) {
 		spin_unlock(&dev->lock);
 
-		req->req.complete(&ep->ep, &req->req);
+		usb_gadget_giveback_request(&ep->ep, &req->req);
 
 		spin_lock(&dev->lock);
 	}
@@ -379,6 +397,15 @@ static void gr_start_dma(struct gr_ep *ep)
 	/* A descriptor should already have been allocated */
 	BUG_ON(!req->curr_desc);
 
+	/*
+	 * The DMA controller can not handle smaller OUT buffers than
+	 * ep->ep.maxpacket. It could lead to buffer overruns if an unexpectedly
+	 * long packet are received. Therefore an internal bounce buffer gets
+	 * used when such a request gets enabled.
+	 */
+	if (!ep->is_in && req->oddlen)
+		req->last_desc->data = ep->tailbuf_paddr;
+
 	wmb(); /* Make sure all is settled before handing it over to DMA */
 
 	/* Set the descriptor pointer in the hardware */
@@ -480,11 +507,11 @@ static int gr_setup_out_desc_list(struct gr_ep *ep, struct gr_request *req,
 		dma_addr_t start = req->req.dma + bytes_used;
 		u16 size = min(bytes_left, ep->bytes_per_buffer);
 
-		/* Should not happen however - gr_queue stops such lengths */
-		if (size < ep->bytes_per_buffer)
-			dev_warn(ep->dev->dev,
-				 "Buffer overrun risk: %u < %u bytes/buffer\n",
-				 size, ep->bytes_per_buffer);
+		if (size < ep->bytes_per_buffer) {
+			/* Prepare using bounce buffer */
+			req->evenlen = req->req.length - bytes_left;
+			req->oddlen = size;
+		}
 
 		ret = gr_add_dma_desc(ep, req, start, size, gfp_flags);
 		if (ret)
@@ -584,18 +611,6 @@ static int gr_queue(struct gr_ep *ep, struct gr_request *req, gfp_t gfp_flags)
 		return -EINVAL;
 	}
 
-	/*
-	 * The DMA controller can not handle smaller OUT buffers than
-	 * maxpacket. It could lead to buffer overruns if unexpectedly long
-	 * packet are received.
-	 */
-	if (!ep->is_in && (req->req.length % ep->ep.maxpacket) != 0) {
-		dev_err(dev->dev,
-			"OUT request length %d is not multiple of maxpacket\n",
-			req->req.length);
-		return -EMSGSIZE;
-	}
-
 	if (unlikely(!dev->driver || dev->gadget.speed == USB_SPEED_UNKNOWN)) {
 		dev_err(dev->dev, "-ESHUTDOWN");
 		return -ESHUTDOWN;
@@ -1286,8 +1301,8 @@ static int gr_handle_out_ep(struct gr_ep *ep)
 	if (ctrl & GR_DESC_OUT_CTRL_SE)
 		req->setup = 1;
 
-	if (len < ep->ep.maxpacket || req->req.actual == req->req.length) {
-		/* Short packet or the expected size - we are done */
+	if (len < ep->ep.maxpacket || req->req.actual >= req->req.length) {
+		/* Short packet or >= expected size - we are done */
 
 		if ((ep == &dev->epo[0]) && (dev->ep0state == GR_EP0_OSTATUS)) {
 			/*
@@ -2015,6 +2030,11 @@ static int gr_ep_init(struct gr_udc *dev, int num, int is_in, u32 maxplimit)
 	}
 	list_add_tail(&ep->ep_list, &dev->ep_list);
 
+	ep->tailbuf = dma_alloc_coherent(dev->dev, ep->ep.maxpacket_limit,
+					 &ep->tailbuf_paddr, GFP_ATOMIC);
+	if (!ep->tailbuf)
+		return -ENOMEM;
+
 	return 0;
 }
 
@@ -2067,9 +2087,24 @@ static int gr_udc_init(struct gr_udc *dev)
 	return 0;
 }
 
+static void gr_ep_remove(struct gr_udc *dev, int num, int is_in)
+{
+	struct gr_ep *ep;
+
+	if (is_in)
+		ep = &dev->epi[num];
+	else
+		ep = &dev->epo[num];
+
+	if (ep->tailbuf)
+		dma_free_coherent(dev->dev, ep->ep.maxpacket_limit,
+				  ep->tailbuf, ep->tailbuf_paddr);
+}
+
 static int gr_remove(struct platform_device *pdev)
 {
 	struct gr_udc *dev = platform_get_drvdata(pdev);
+	int i;
 
 	if (dev->added)
 		usb_del_gadget_udc(&dev->gadget); /* Shuts everything down */
@@ -2084,6 +2119,11 @@ static int gr_remove(struct platform_device *pdev)
 	gr_free_request(&dev->epi[0].ep, &dev->ep0reqi->req);
 	gr_free_request(&dev->epo[0].ep, &dev->ep0reqo->req);
 
+	for (i = 0; i < dev->nepo; i++)
+		gr_ep_remove(dev, i, 0);
+	for (i = 0; i < dev->nepi; i++)
+		gr_ep_remove(dev, i, 1);
+
 	return 0;
 }
 static int gr_request_irq(struct gr_udc *dev, int irq)
@@ -2131,7 +2171,6 @@ static int gr_probe(struct platform_device *pdev)
 	dev->gadget.name = driver_name;
 	dev->gadget.max_speed = USB_SPEED_HIGH;
 	dev->gadget.ops = &gr_ops;
-	dev->gadget.quirk_ep_out_aligned_size = true;
 
 	spin_lock_init(&dev->lock);
 	dev->regs = regs;
diff --git a/drivers/usb/gadget/udc/gr_udc.h b/drivers/usb/gadget/udc/gr_udc.h
index 8388897d9ec3..4297c4e8021f 100644
--- a/drivers/usb/gadget/udc/gr_udc.h
+++ b/drivers/usb/gadget/udc/gr_udc.h
@@ -156,6 +156,10 @@ struct gr_ep {
 	struct list_head queue;
 
 	struct list_head ep_list;
+
+	/* Bounce buffer for end of "odd" sized OUT requests */
+	void *tailbuf;
+	dma_addr_t tailbuf_paddr;
 };
 
 struct gr_request {
@@ -167,6 +171,9 @@ struct gr_request {
 	struct gr_dma_desc *curr_desc; /* Current descriptor */
 	struct gr_dma_desc *last_desc; /* Last in the chain */
 
+	u16 evenlen; /* Size of even length head (if oddlen != 0) */
+	u16 oddlen; /* Size of odd length tail if buffer length is "odd" */
+
 	u8 setup; /* Setup packet */
 };
 
diff --git a/drivers/usb/gadget/udc/lpc32xx_udc.c b/drivers/usb/gadget/udc/lpc32xx_udc.c
index 1629ad7dcb80..feab0bac8fdc 100644
--- a/drivers/usb/gadget/udc/lpc32xx_udc.c
+++ b/drivers/usb/gadget/udc/lpc32xx_udc.c
@@ -1479,7 +1479,7 @@ static void done(struct lpc32xx_ep *ep, struct lpc32xx_request *req, int status)
 
 	ep->req_pending = 0;
 	spin_unlock(&udc->lock);
-	req->req.complete(&ep->ep, &req->req);
+	usb_gadget_giveback_request(&ep->ep, &req->req);
 	spin_lock(&udc->lock);
 }
 
diff --git a/drivers/usb/gadget/udc/m66592-udc.c b/drivers/usb/gadget/udc/m66592-udc.c
index de88d33b44b2..898565687a8c 100644
--- a/drivers/usb/gadget/udc/m66592-udc.c
+++ b/drivers/usb/gadget/udc/m66592-udc.c
@@ -729,7 +729,7 @@ __acquires(m66592->lock)
 		restart = 1;
 
 	spin_unlock(&ep->m66592->lock);
-	req->req.complete(&ep->ep, &req->req);
+	usb_gadget_giveback_request(&ep->ep, &req->req);
 	spin_lock(&ep->m66592->lock);
 
 	if (restart) {
diff --git a/drivers/usb/gadget/udc/mv_u3d_core.c b/drivers/usb/gadget/udc/mv_u3d_core.c
index 16248711c152..046a1f808b0d 100644
--- a/drivers/usb/gadget/udc/mv_u3d_core.c
+++ b/drivers/usb/gadget/udc/mv_u3d_core.c
@@ -222,12 +222,8 @@ void mv_u3d_done(struct mv_u3d_ep *ep, struct mv_u3d_req *req, int status)
 	}
 
 	spin_unlock(&ep->u3d->lock);
-	/*
-	 * complete() is from gadget layer,
-	 * eg fsg->bulk_in_complete()
-	 */
-	if (req->req.complete)
-		req->req.complete(&ep->ep, &req->req);
+
+	usb_gadget_giveback_request(&ep->ep, &req->req);
 
 	spin_lock(&ep->u3d->lock);
 }
diff --git a/drivers/usb/gadget/udc/mv_udc_core.c b/drivers/usb/gadget/udc/mv_udc_core.c
index 040fb169b162..3c5db80ae325 100644
--- a/drivers/usb/gadget/udc/mv_udc_core.c
+++ b/drivers/usb/gadget/udc/mv_udc_core.c
@@ -248,12 +248,8 @@ static void done(struct mv_ep *ep, struct mv_req *req, int status)
 	ep->stopped = 1;
 
 	spin_unlock(&ep->udc->lock);
-	/*
-	 * complete() is from gadget layer,
-	 * eg fsg->bulk_in_complete()
-	 */
-	if (req->req.complete)
-		req->req.complete(&ep->ep, &req->req);
+
+	usb_gadget_giveback_request(&ep->ep, &req->req);
 
 	spin_lock(&ep->udc->lock);
 	ep->stopped = stopped;
diff --git a/drivers/usb/gadget/udc/net2272.c b/drivers/usb/gadget/udc/net2272.c
index 059cfe527982..84d7162a8022 100644
--- a/drivers/usb/gadget/udc/net2272.c
+++ b/drivers/usb/gadget/udc/net2272.c
@@ -394,7 +394,7 @@ net2272_done(struct net2272_ep *ep, struct net2272_request *req, int status)
 	/* don't modify queue heads during completion callback */
 	ep->stopped = 1;
 	spin_unlock(&dev->lock);
-	req->req.complete(&ep->ep, &req->req);
+	usb_gadget_giveback_request(&ep->ep, &req->req);
 	spin_lock(&dev->lock);
 	ep->stopped = stopped;
 }
diff --git a/drivers/usb/gadget/udc/net2280.c b/drivers/usb/gadget/udc/net2280.c
index 2e95715b50c0..8d13337e2dde 100644
--- a/drivers/usb/gadget/udc/net2280.c
+++ b/drivers/usb/gadget/udc/net2280.c
@@ -928,7 +928,7 @@ done(struct net2280_ep *ep, struct net2280_request *req, int status)
 	/* don't modify queue heads during completion callback */
 	ep->stopped = 1;
 	spin_unlock(&dev->lock);
-	req->req.complete(&ep->ep, &req->req);
+	usb_gadget_giveback_request(&ep->ep, &req->req);
 	spin_lock(&dev->lock);
 	ep->stopped = stopped;
 }
diff --git a/drivers/usb/gadget/udc/omap_udc.c b/drivers/usb/gadget/udc/omap_udc.c
index e731373fd4d7..dcdfea46003b 100644
--- a/drivers/usb/gadget/udc/omap_udc.c
+++ b/drivers/usb/gadget/udc/omap_udc.c
@@ -315,7 +315,7 @@ done(struct omap_ep *ep, struct omap_req *req, int status)
 	/* don't modify queue heads during completion callback */
 	ep->stopped = 1;
 	spin_unlock(&ep->udc->lock);
-	req->req.complete(&ep->ep, &req->req);
+	usb_gadget_giveback_request(&ep->ep, &req->req);
 	spin_lock(&ep->udc->lock);
 	ep->stopped = stopped;
 }
diff --git a/drivers/usb/gadget/udc/pch_udc.c b/drivers/usb/gadget/udc/pch_udc.c
index 460d953c91b6..ccbe3d4a2a50 100644
--- a/drivers/usb/gadget/udc/pch_udc.c
+++ b/drivers/usb/gadget/udc/pch_udc.c
@@ -1490,7 +1490,7 @@ static void complete_req(struct pch_udc_ep *ep, struct pch_udc_request *req,
 	spin_unlock(&dev->lock);
 	if (!ep->in)
 		pch_udc_ep_clear_rrdy(ep);
-	req->req.complete(&ep->ep, &req->req);
+	usb_gadget_giveback_request(&ep->ep, &req->req);
 	spin_lock(&dev->lock);
 	ep->halted = halted;
 }
diff --git a/drivers/usb/gadget/udc/pxa25x_udc.c b/drivers/usb/gadget/udc/pxa25x_udc.c
index 251e4d5ee152..42f7eeb8ff6f 100644
--- a/drivers/usb/gadget/udc/pxa25x_udc.c
+++ b/drivers/usb/gadget/udc/pxa25x_udc.c
@@ -347,7 +347,7 @@ static void done(struct pxa25x_ep *ep, struct pxa25x_request *req, int status)
 
 	/* don't modify queue heads during completion callback */
 	ep->stopped = 1;
-	req->req.complete(&ep->ep, &req->req);
+	usb_gadget_giveback_request(&ep->ep, &req->req);
 	ep->stopped = stopped;
 }
 
diff --git a/drivers/usb/gadget/udc/pxa27x_udc.c b/drivers/usb/gadget/udc/pxa27x_udc.c
index 597d39f89420..4868369eeec6 100644
--- a/drivers/usb/gadget/udc/pxa27x_udc.c
+++ b/drivers/usb/gadget/udc/pxa27x_udc.c
@@ -758,7 +758,7 @@ static void req_done(struct pxa_ep *ep, struct pxa27x_request *req, int status,
 	if (pflags)
 		spin_unlock_irqrestore(&ep->lock, *pflags);
 	local_irq_save(flags);
-	req->req.complete(&req->udc_usb_ep->usb_ep, &req->req);
+	usb_gadget_giveback_request(&req->udc_usb_ep->usb_ep, &req->req);
 	local_irq_restore(flags);
 	if (pflags)
 		spin_lock_irqsave(&ep->lock, *pflags);
diff --git a/drivers/usb/gadget/udc/r8a66597-udc.c b/drivers/usb/gadget/udc/r8a66597-udc.c
index de2a8713b428..f8186613b53e 100644
--- a/drivers/usb/gadget/udc/r8a66597-udc.c
+++ b/drivers/usb/gadget/udc/r8a66597-udc.c
@@ -430,7 +430,7 @@ static void r8a66597_ep_setting(struct r8a66597 *r8a66597,
 	ep->pipenum = pipenum;
 	ep->ep.maxpacket = usb_endpoint_maxp(desc);
 	r8a66597->pipenum2ep[pipenum] = ep;
-	r8a66597->epaddr2ep[desc->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK]
+	r8a66597->epaddr2ep[usb_endpoint_num(desc)]
 		= ep;
 	INIT_LIST_HEAD(&ep->queue);
 }
@@ -464,7 +464,7 @@ static int alloc_pipe_config(struct r8a66597_ep *ep,
 	if (ep->pipenum)	/* already allocated pipe  */
 		return 0;
 
-	switch (desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) {
+	switch (usb_endpoint_type(desc)) {
 	case USB_ENDPOINT_XFER_BULK:
 		if (r8a66597->bulk >= R8A66597_MAX_NUM_BULK) {
 			if (r8a66597->isochronous >= R8A66597_MAX_NUM_ISOC) {
@@ -509,7 +509,7 @@ static int alloc_pipe_config(struct r8a66597_ep *ep,
 	}
 	ep->type = info.type;
 
-	info.epnum = desc->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK;
+	info.epnum = usb_endpoint_num(desc);
 	info.maxpacket = usb_endpoint_maxp(desc);
 	info.interval = desc->bInterval;
 	if (desc->bEndpointAddress & USB_ENDPOINT_DIR_MASK)
@@ -925,7 +925,7 @@ __acquires(r8a66597->lock)
 		sudmac_free_channel(ep->r8a66597, ep, req);
 
 	spin_unlock(&ep->r8a66597->lock);
-	req->req.complete(&ep->ep, &req->req);
+	usb_gadget_giveback_request(&ep->ep, &req->req);
 	spin_lock(&ep->r8a66597->lock);
 
 	if (restart) {
@@ -1846,10 +1846,8 @@ static int r8a66597_sudmac_ioremap(struct r8a66597 *r8a66597,
 
 	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "sudmac");
 	r8a66597->sudmac_reg = devm_ioremap_resource(&pdev->dev, res);
-	if (IS_ERR(r8a66597->sudmac_reg)) {
-		dev_err(&pdev->dev, "ioremap error(sudmac).\n");
+	if (IS_ERR(r8a66597->sudmac_reg))
 		return PTR_ERR(r8a66597->sudmac_reg);
-	}
 
 	return 0;
 }
diff --git a/drivers/usb/gadget/udc/s3c-hsudc.c b/drivers/usb/gadget/udc/s3c-hsudc.c
index 10c6a128250c..dfbf55797360 100644
--- a/drivers/usb/gadget/udc/s3c-hsudc.c
+++ b/drivers/usb/gadget/udc/s3c-hsudc.c
@@ -258,8 +258,7 @@ static void s3c_hsudc_complete_request(struct s3c_hsudc_ep *hsep,
 
 	hsep->stopped = 1;
 	spin_unlock(&hsudc->lock);
-	if (hsreq->req.complete != NULL)
-		hsreq->req.complete(&hsep->ep, &hsreq->req);
+	usb_gadget_giveback_request(&hsep->ep, &hsreq->req);
 	spin_lock(&hsudc->lock);
 	hsep->stopped = stopped;
 }
diff --git a/drivers/usb/gadget/udc/s3c2410_udc.c b/drivers/usb/gadget/udc/s3c2410_udc.c
index 357b58e0087b..ff423d15beff 100644
--- a/drivers/usb/gadget/udc/s3c2410_udc.c
+++ b/drivers/usb/gadget/udc/s3c2410_udc.c
@@ -272,7 +272,7 @@ static void s3c2410_udc_done(struct s3c2410_ep *ep,
 		status = req->req.status;
 
 	ep->halted = 1;
-	req->req.complete(&ep->ep, &req->req);
+	usb_gadget_giveback_request(&ep->ep, &req->req);
 	ep->halted = halted;
 }
 
diff --git a/drivers/usb/gadget/udc/udc-core.c b/drivers/usb/gadget/udc/udc-core.c
index b0d98172bc07..f107bb60a5ab 100644
--- a/drivers/usb/gadget/udc/udc-core.c
+++ b/drivers/usb/gadget/udc/udc-core.c
@@ -27,6 +27,7 @@
 
 #include <linux/usb/ch9.h>
 #include <linux/usb/gadget.h>
+#include <linux/usb.h>
 
 /**
  * struct usb_udc - describes one usb device controller
@@ -106,11 +107,42 @@ EXPORT_SYMBOL_GPL(usb_gadget_unmap_request);
 
 /* ------------------------------------------------------------------------- */
 
+/**
+ * usb_gadget_giveback_request - give the request back to the gadget layer
+ * Context: in_interrupt()
+ *
+ * This is called by device controller drivers in order to return the
+ * completed request back to the gadget layer.
+ */
+void usb_gadget_giveback_request(struct usb_ep *ep,
+		struct usb_request *req)
+{
+	if (likely(req->status == 0))
+		usb_led_activity(USB_LED_EVENT_GADGET);
+
+	req->complete(ep, req);
+}
+EXPORT_SYMBOL_GPL(usb_gadget_giveback_request);
+
+/* ------------------------------------------------------------------------- */
+
 static void usb_gadget_state_work(struct work_struct *work)
 {
 	struct usb_gadget	*gadget = work_to_gadget(work);
+	struct usb_udc		*udc = NULL;
+
+	mutex_lock(&udc_lock);
+	list_for_each_entry(udc, &udc_list, list)
+		if (udc->gadget == gadget)
+			goto found;
+	mutex_unlock(&udc_lock);
+
+	return;
+
+found:
+	mutex_unlock(&udc_lock);
 
-	sysfs_notify(&gadget->dev.kobj, NULL, "state");
+	sysfs_notify(&udc->dev.kobj, NULL, "state");
 }
 
 void usb_gadget_set_state(struct usb_gadget *gadget,
@@ -124,6 +156,23 @@ EXPORT_SYMBOL_GPL(usb_gadget_set_state);
 /* ------------------------------------------------------------------------- */
 
 /**
+ * usb_gadget_udc_reset - notifies the udc core that bus reset occurs
+ * @gadget: The gadget which bus reset occurs
+ * @driver: The gadget driver we want to notify
+ *
+ * If the udc driver has bus reset handler, it needs to call this when the bus
+ * reset occurs, it notifies the gadget driver that the bus reset occurs as
+ * well as updates gadget state.
+ */
+void usb_gadget_udc_reset(struct usb_gadget *gadget,
+		struct usb_gadget_driver *driver)
+{
+	driver->reset(gadget);
+	usb_gadget_set_state(gadget, USB_STATE_DEFAULT);
+}
+EXPORT_SYMBOL_GPL(usb_gadget_udc_reset);
+
+/**
  * usb_gadget_udc_start - tells usb device controller to start up
  * @gadget: The gadget we want to get started
  * @driver: The driver we want to bind to @gadget
diff --git a/drivers/usb/gadget/udc/udc-xilinx.c b/drivers/usb/gadget/udc/udc-xilinx.c
new file mode 100644
index 000000000000..ed27e1687a4e
--- /dev/null
+++ b/drivers/usb/gadget/udc/udc-xilinx.c
@@ -0,0 +1,2180 @@
+/*
+ * Xilinx USB peripheral controller driver
+ *
+ * Copyright (C) 2004 by Thomas Rathbone
+ * Copyright (C) 2005 by HP Labs
+ * Copyright (C) 2005 by David Brownell
+ * Copyright (C) 2010 - 2014 Xilinx, Inc.
+ *
+ * Some parts of this driver code is based on the driver for at91-series
+ * USB peripheral controller (at91_udc.c).
+ *
+ * This program is free software; you can redistribute it
+ * and/or modify it under the terms of the GNU General Public
+ * License as published by the Free Software Foundation;
+ * either version 2 of the License, or (at your option) any
+ * later version.
+ */
+
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/dma-mapping.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of_address.h>
+#include <linux/of_device.h>
+#include <linux/of_platform.h>
+#include <linux/of_irq.h>
+#include <linux/prefetch.h>
+#include <linux/usb/ch9.h>
+#include <linux/usb/gadget.h>
+
+/* Register offsets for the USB device.*/
+#define XUSB_EP0_CONFIG_OFFSET		0x0000  /* EP0 Config Reg Offset */
+#define XUSB_SETUP_PKT_ADDR_OFFSET	0x0080  /* Setup Packet Address */
+#define XUSB_ADDRESS_OFFSET		0x0100  /* Address Register */
+#define XUSB_CONTROL_OFFSET		0x0104  /* Control Register */
+#define XUSB_STATUS_OFFSET		0x0108  /* Status Register */
+#define XUSB_FRAMENUM_OFFSET		0x010C	/* Frame Number Register */
+#define XUSB_IER_OFFSET			0x0110	/* Interrupt Enable Register */
+#define XUSB_BUFFREADY_OFFSET		0x0114	/* Buffer Ready Register */
+#define XUSB_TESTMODE_OFFSET		0x0118	/* Test Mode Register */
+#define XUSB_DMA_RESET_OFFSET		0x0200  /* DMA Soft Reset Register */
+#define XUSB_DMA_CONTROL_OFFSET		0x0204	/* DMA Control Register */
+#define XUSB_DMA_DSAR_ADDR_OFFSET	0x0208	/* DMA source Address Reg */
+#define XUSB_DMA_DDAR_ADDR_OFFSET	0x020C	/* DMA destination Addr Reg */
+#define XUSB_DMA_LENGTH_OFFSET		0x0210	/* DMA Length Register */
+#define XUSB_DMA_STATUS_OFFSET		0x0214	/* DMA Status Register */
+
+/* Endpoint Configuration Space offsets */
+#define XUSB_EP_CFGSTATUS_OFFSET	0x00	/* Endpoint Config Status  */
+#define XUSB_EP_BUF0COUNT_OFFSET	0x08	/* Buffer 0 Count */
+#define XUSB_EP_BUF1COUNT_OFFSET	0x0C	/* Buffer 1 Count */
+
+#define XUSB_CONTROL_USB_READY_MASK	0x80000000 /* USB ready Mask */
+#define XUSB_CONTROL_USB_RMTWAKE_MASK	0x40000000 /* Remote wake up mask */
+
+/* Interrupt register related masks.*/
+#define XUSB_STATUS_GLOBAL_INTR_MASK	0x80000000 /* Global Intr Enable */
+#define XUSB_STATUS_DMADONE_MASK	0x04000000 /* DMA done Mask */
+#define XUSB_STATUS_DMAERR_MASK		0x02000000 /* DMA Error Mask */
+#define XUSB_STATUS_DMABUSY_MASK	0x80000000 /* DMA Error Mask */
+#define XUSB_STATUS_RESUME_MASK		0x01000000 /* USB Resume Mask */
+#define XUSB_STATUS_RESET_MASK		0x00800000 /* USB Reset Mask */
+#define XUSB_STATUS_SUSPEND_MASK	0x00400000 /* USB Suspend Mask */
+#define XUSB_STATUS_DISCONNECT_MASK	0x00200000 /* USB Disconnect Mask */
+#define XUSB_STATUS_FIFO_BUFF_RDY_MASK	0x00100000 /* FIFO Buff Ready Mask */
+#define XUSB_STATUS_FIFO_BUFF_FREE_MASK	0x00080000 /* FIFO Buff Free Mask */
+#define XUSB_STATUS_SETUP_PACKET_MASK	0x00040000 /* Setup packet received */
+#define XUSB_STATUS_EP1_BUFF2_COMP_MASK	0x00000200 /* EP 1 Buff 2 Processed */
+#define XUSB_STATUS_EP1_BUFF1_COMP_MASK	0x00000002 /* EP 1 Buff 1 Processed */
+#define XUSB_STATUS_EP0_BUFF2_COMP_MASK	0x00000100 /* EP 0 Buff 2 Processed */
+#define XUSB_STATUS_EP0_BUFF1_COMP_MASK	0x00000001 /* EP 0 Buff 1 Processed */
+#define XUSB_STATUS_HIGH_SPEED_MASK	0x00010000 /* USB Speed Mask */
+/* Suspend,Reset,Suspend and Disconnect Mask */
+#define XUSB_STATUS_INTR_EVENT_MASK	0x01E00000
+/* Buffers  completion Mask */
+#define XUSB_STATUS_INTR_BUFF_COMP_ALL_MASK	0x0000FEFF
+/* Mask for buffer 0 and buffer 1 completion for all Endpoints */
+#define XUSB_STATUS_INTR_BUFF_COMP_SHIFT_MASK	0x00000101
+#define XUSB_STATUS_EP_BUFF2_SHIFT	8	   /* EP buffer offset */
+
+/* Endpoint Configuration Status Register */
+#define XUSB_EP_CFG_VALID_MASK		0x80000000 /* Endpoint Valid bit */
+#define XUSB_EP_CFG_STALL_MASK		0x40000000 /* Endpoint Stall bit */
+#define XUSB_EP_CFG_DATA_TOGGLE_MASK	0x08000000 /* Endpoint Data toggle */
+
+/* USB device specific global configuration constants.*/
+#define XUSB_MAX_ENDPOINTS		8	/* Maximum End Points */
+#define XUSB_EP_NUMBER_ZERO		0	/* End point Zero */
+/* DPRAM is the source address for DMA transfer */
+#define XUSB_DMA_READ_FROM_DPRAM	0x80000000
+#define XUSB_DMA_DMASR_BUSY		0x80000000 /* DMA busy */
+#define XUSB_DMA_DMASR_ERROR		0x40000000 /* DMA Error */
+/*
+ * When this bit is set, the DMA buffer ready bit is set by hardware upon
+ * DMA transfer completion.
+ */
+#define XUSB_DMA_BRR_CTRL		0x40000000 /* DMA bufready ctrl bit */
+/* Phase States */
+#define SETUP_PHASE			0x0000	/* Setup Phase */
+#define DATA_PHASE			0x0001  /* Data Phase */
+#define STATUS_PHASE			0x0002  /* Status Phase */
+
+#define EP0_MAX_PACKET		64 /* Endpoint 0 maximum packet length */
+#define STATUSBUFF_SIZE		2  /* Buffer size for GET_STATUS command */
+#define EPNAME_SIZE		4  /* Buffer size for endpoint name */
+
+/* container_of helper macros */
+#define to_udc(g)	 container_of((g), struct xusb_udc, gadget)
+#define to_xusb_ep(ep)	 container_of((ep), struct xusb_ep, ep_usb)
+#define to_xusb_req(req) container_of((req), struct xusb_req, usb_req)
+
+/**
+ * struct xusb_req - Xilinx USB device request structure
+ * @usb_req: Linux usb request structure
+ * @queue: usb device request queue
+ * @ep: pointer to xusb_endpoint structure
+ */
+struct xusb_req {
+	struct usb_request usb_req;
+	struct list_head queue;
+	struct xusb_ep *ep;
+};
+
+/**
+ * struct xusb_ep - USB end point structure.
+ * @ep_usb: usb endpoint instance
+ * @queue: endpoint message queue
+ * @udc: xilinx usb peripheral driver instance pointer
+ * @desc: pointer to the usb endpoint descriptor
+ * @rambase: the endpoint buffer address
+ * @offset: the endpoint register offset value
+ * @name: name of the endpoint
+ * @epnumber: endpoint number
+ * @maxpacket: maximum packet size the endpoint can store
+ * @buffer0count: the size of the packet recieved in the first buffer
+ * @buffer1count: the size of the packet received in the second buffer
+ * @curbufnum: current buffer of endpoint that will be processed next
+ * @buffer0ready: the busy state of first buffer
+ * @buffer1ready: the busy state of second buffer
+ * @is_in: endpoint direction (IN or OUT)
+ * @is_iso: endpoint type(isochronous or non isochronous)
+ */
+struct xusb_ep {
+	struct usb_ep ep_usb;
+	struct list_head queue;
+	struct xusb_udc *udc;
+	const struct usb_endpoint_descriptor *desc;
+	u32  rambase;
+	u32  offset;
+	char name[4];
+	u16  epnumber;
+	u16  maxpacket;
+	u16  buffer0count;
+	u16  buffer1count;
+	u8   curbufnum;
+	bool buffer0ready;
+	bool buffer1ready;
+	bool is_in;
+	bool is_iso;
+};
+
+/**
+ * struct xusb_udc -  USB peripheral driver structure
+ * @gadget: USB gadget driver instance
+ * @ep: an array of endpoint structures
+ * @driver: pointer to the usb gadget driver instance
+ * @setup: usb_ctrlrequest structure for control requests
+ * @req: pointer to dummy request for get status command
+ * @dev: pointer to device structure in gadget
+ * @usb_state: device in suspended state or not
+ * @remote_wkp: remote wakeup enabled by host
+ * @setupseqtx: tx status
+ * @setupseqrx: rx status
+ * @addr: the usb device base address
+ * @lock: instance of spinlock
+ * @dma_enabled: flag indicating whether the dma is included in the system
+ * @read_fn: function pointer to read device registers
+ * @write_fn: function pointer to write to device registers
+ */
+struct xusb_udc {
+	struct usb_gadget gadget;
+	struct xusb_ep ep[8];
+	struct usb_gadget_driver *driver;
+	struct usb_ctrlrequest setup;
+	struct xusb_req *req;
+	struct device *dev;
+	u32 usb_state;
+	u32 remote_wkp;
+	u32 setupseqtx;
+	u32 setupseqrx;
+	void __iomem *addr;
+	spinlock_t lock;
+	bool dma_enabled;
+
+	unsigned int (*read_fn)(void __iomem *);
+	void (*write_fn)(void __iomem *, u32, u32);
+};
+
+/* Endpoint buffer start addresses in the core */
+static u32 rambase[8] = { 0x22, 0x1000, 0x1100, 0x1200, 0x1300, 0x1400, 0x1500,
+			  0x1600 };
+
+static const char driver_name[] = "xilinx-udc";
+static const char ep0name[] = "ep0";
+
+/* Control endpoint configuration.*/
+static const struct usb_endpoint_descriptor config_bulk_out_desc = {
+	.bLength		= USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType	= USB_DT_ENDPOINT,
+	.bEndpointAddress	= USB_DIR_OUT,
+	.bmAttributes		= USB_ENDPOINT_XFER_BULK,
+	.wMaxPacketSize		= cpu_to_le16(EP0_MAX_PACKET),
+};
+
+/**
+ * xudc_write32 - little endian write to device registers
+ * @addr: base addr of device registers
+ * @offset: register offset
+ * @val: data to be written
+ */
+static void xudc_write32(void __iomem *addr, u32 offset, u32 val)
+{
+	iowrite32(val, addr + offset);
+}
+
+/**
+ * xudc_read32 - little endian read from device registers
+ * @addr: addr of device register
+ * Return: value at addr
+ */
+static unsigned int xudc_read32(void __iomem *addr)
+{
+	return ioread32(addr);
+}
+
+/**
+ * xudc_write32_be - big endian write to device registers
+ * @addr: base addr of device registers
+ * @offset: register offset
+ * @val: data to be written
+ */
+static void xudc_write32_be(void __iomem *addr, u32 offset, u32 val)
+{
+	iowrite32be(val, addr + offset);
+}
+
+/**
+ * xudc_read32_be - big endian read from device registers
+ * @addr: addr of device register
+ * Return: value at addr
+ */
+static unsigned int xudc_read32_be(void __iomem *addr)
+{
+	return ioread32be(addr);
+}
+
+/**
+ * xudc_wrstatus - Sets up the usb device status stages.
+ * @udc: pointer to the usb device controller structure.
+ */
+static void xudc_wrstatus(struct xusb_udc *udc)
+{
+	struct xusb_ep *ep0 = &udc->ep[XUSB_EP_NUMBER_ZERO];
+	u32 epcfgreg;
+
+	epcfgreg = udc->read_fn(udc->addr + ep0->offset)|
+				XUSB_EP_CFG_DATA_TOGGLE_MASK;
+	udc->write_fn(udc->addr, ep0->offset, epcfgreg);
+	udc->write_fn(udc->addr, ep0->offset + XUSB_EP_BUF0COUNT_OFFSET, 0);
+	udc->write_fn(udc->addr, XUSB_BUFFREADY_OFFSET, 1);
+}
+
+/**
+ * xudc_epconfig - Configures the given endpoint.
+ * @ep: pointer to the usb device endpoint structure.
+ * @udc: pointer to the usb peripheral controller structure.
+ *
+ * This function configures a specific endpoint with the given configuration
+ * data.
+ */
+static void xudc_epconfig(struct xusb_ep *ep, struct xusb_udc *udc)
+{
+	u32 epcfgreg;
+
+	/*
+	 * Configure the end point direction, type, Max Packet Size and the
+	 * EP buffer location.
+	 */
+	epcfgreg = ((ep->is_in << 29) | (ep->is_iso << 28) |
+		   (ep->ep_usb.maxpacket << 15) | (ep->rambase));
+	udc->write_fn(udc->addr, ep->offset, epcfgreg);
+
+	/* Set the Buffer count and the Buffer ready bits.*/
+	udc->write_fn(udc->addr, ep->offset + XUSB_EP_BUF0COUNT_OFFSET,
+		      ep->buffer0count);
+	udc->write_fn(udc->addr, ep->offset + XUSB_EP_BUF1COUNT_OFFSET,
+		      ep->buffer1count);
+	if (ep->buffer0ready)
+		udc->write_fn(udc->addr, XUSB_BUFFREADY_OFFSET,
+			      1 << ep->epnumber);
+	if (ep->buffer1ready)
+		udc->write_fn(udc->addr, XUSB_BUFFREADY_OFFSET,
+			      1 << (ep->epnumber + XUSB_STATUS_EP_BUFF2_SHIFT));
+}
+
+/**
+ * xudc_start_dma - Starts DMA transfer.
+ * @ep: pointer to the usb device endpoint structure.
+ * @src: DMA source address.
+ * @dst: DMA destination address.
+ * @length: number of bytes to transfer.
+ *
+ * Return: 0 on success, error code on failure
+ *
+ * This function starts DMA transfer by writing to DMA source,
+ * destination and lenth registers.
+ */
+static int xudc_start_dma(struct xusb_ep *ep, dma_addr_t src,
+			  dma_addr_t dst, u32 length)
+{
+	struct xusb_udc *udc = ep->udc;
+	int rc = 0;
+	u32 timeout = 500;
+	u32 reg;
+
+	/*
+	 * Set the addresses in the DMA source and
+	 * destination registers and then set the length
+	 * into the DMA length register.
+	 */
+	udc->write_fn(udc->addr, XUSB_DMA_DSAR_ADDR_OFFSET, src);
+	udc->write_fn(udc->addr, XUSB_DMA_DDAR_ADDR_OFFSET, dst);
+	udc->write_fn(udc->addr, XUSB_DMA_LENGTH_OFFSET, length);
+
+	/*
+	 * Wait till DMA transaction is complete and
+	 * check whether the DMA transaction was
+	 * successful.
+	 */
+	do {
+		reg = udc->read_fn(udc->addr + XUSB_DMA_STATUS_OFFSET);
+		if (!(reg &  XUSB_DMA_DMASR_BUSY))
+			break;
+
+		/*
+		 * We can't sleep here, because it's also called from
+		 * interrupt context.
+		 */
+		timeout--;
+		if (!timeout) {
+			dev_err(udc->dev, "DMA timeout\n");
+			return -ETIMEDOUT;
+		}
+		udelay(1);
+	} while (1);
+
+	if ((udc->read_fn(udc->addr + XUSB_DMA_STATUS_OFFSET) &
+			  XUSB_DMA_DMASR_ERROR) == XUSB_DMA_DMASR_ERROR){
+		dev_err(udc->dev, "DMA Error\n");
+		rc = -EINVAL;
+	}
+
+	return rc;
+}
+
+/**
+ * xudc_dma_send - Sends IN data using DMA.
+ * @ep: pointer to the usb device endpoint structure.
+ * @req: pointer to the usb request structure.
+ * @buffer: pointer to data to be sent.
+ * @length: number of bytes to send.
+ *
+ * Return: 0 on success, -EAGAIN if no buffer is free and error
+ *	   code on failure.
+ *
+ * This function sends data using DMA.
+ */
+static int xudc_dma_send(struct xusb_ep *ep, struct xusb_req *req,
+			 u8 *buffer, u32 length)
+{
+	u32 *eprambase;
+	dma_addr_t src;
+	dma_addr_t dst;
+	struct xusb_udc *udc = ep->udc;
+
+	src = req->usb_req.dma + req->usb_req.actual;
+	if (req->usb_req.length)
+		dma_sync_single_for_device(udc->dev, src,
+					   length, DMA_TO_DEVICE);
+	if (!ep->curbufnum && !ep->buffer0ready) {
+		/* Get the Buffer address and copy the transmit data.*/
+		eprambase = (u32 __force *)(udc->addr + ep->rambase);
+		dst = virt_to_phys(eprambase);
+		udc->write_fn(udc->addr, ep->offset +
+			      XUSB_EP_BUF0COUNT_OFFSET, length);
+		udc->write_fn(udc->addr, XUSB_DMA_CONTROL_OFFSET,
+			      XUSB_DMA_BRR_CTRL | (1 << ep->epnumber));
+		ep->buffer0ready = 1;
+		ep->curbufnum = 1;
+	} else if (ep->curbufnum && !ep->buffer1ready) {
+		/* Get the Buffer address and copy the transmit data.*/
+		eprambase = (u32 __force *)(udc->addr + ep->rambase +
+			     ep->ep_usb.maxpacket);
+		dst = virt_to_phys(eprambase);
+		udc->write_fn(udc->addr, ep->offset +
+			      XUSB_EP_BUF1COUNT_OFFSET, length);
+		udc->write_fn(udc->addr, XUSB_DMA_CONTROL_OFFSET,
+			      XUSB_DMA_BRR_CTRL | (1 << (ep->epnumber +
+			      XUSB_STATUS_EP_BUFF2_SHIFT)));
+		ep->buffer1ready = 1;
+		ep->curbufnum = 0;
+	} else {
+		/* None of ping pong buffers are ready currently .*/
+		return -EAGAIN;
+	}
+
+	return xudc_start_dma(ep, src, dst, length);
+}
+
+/**
+ * xudc_dma_receive - Receives OUT data using DMA.
+ * @ep: pointer to the usb device endpoint structure.
+ * @req: pointer to the usb request structure.
+ * @buffer: pointer to storage buffer of received data.
+ * @length: number of bytes to receive.
+ *
+ * Return: 0 on success, -EAGAIN if no buffer is free and error
+ *	   code on failure.
+ *
+ * This function receives data using DMA.
+ */
+static int xudc_dma_receive(struct xusb_ep *ep, struct xusb_req *req,
+			    u8 *buffer, u32 length)
+{
+	u32 *eprambase;
+	dma_addr_t src;
+	dma_addr_t dst;
+	struct xusb_udc *udc = ep->udc;
+
+	dst = req->usb_req.dma + req->usb_req.actual;
+	if (!ep->curbufnum && !ep->buffer0ready) {
+		/* Get the Buffer address and copy the transmit data */
+		eprambase = (u32 __force *)(udc->addr + ep->rambase);
+		src = virt_to_phys(eprambase);
+		udc->write_fn(udc->addr, XUSB_DMA_CONTROL_OFFSET,
+			      XUSB_DMA_BRR_CTRL | XUSB_DMA_READ_FROM_DPRAM |
+			      (1 << ep->epnumber));
+		ep->buffer0ready = 1;
+		ep->curbufnum = 1;
+	} else if (ep->curbufnum && !ep->buffer1ready) {
+		/* Get the Buffer address and copy the transmit data */
+		eprambase = (u32 __force *)(udc->addr +
+			     ep->rambase + ep->ep_usb.maxpacket);
+		src = virt_to_phys(eprambase);
+		udc->write_fn(udc->addr, XUSB_DMA_CONTROL_OFFSET,
+			      XUSB_DMA_BRR_CTRL | XUSB_DMA_READ_FROM_DPRAM |
+			      (1 << (ep->epnumber +
+			      XUSB_STATUS_EP_BUFF2_SHIFT)));
+		ep->buffer1ready = 1;
+		ep->curbufnum = 0;
+	} else {
+		/* None of the ping-pong buffers are ready currently */
+		return -EAGAIN;
+	}
+
+	return xudc_start_dma(ep, src, dst, length);
+}
+
+/**
+ * xudc_eptxrx - Transmits or receives data to or from an endpoint.
+ * @ep: pointer to the usb endpoint configuration structure.
+ * @req: pointer to the usb request structure.
+ * @bufferptr: pointer to buffer containing the data to be sent.
+ * @bufferlen: The number of data bytes to be sent.
+ *
+ * Return: 0 on success, -EAGAIN if no buffer is free.
+ *
+ * This function copies the transmit/receive data to/from the end point buffer
+ * and enables the buffer for transmission/reception.
+ */
+static int xudc_eptxrx(struct xusb_ep *ep, struct xusb_req *req,
+		       u8 *bufferptr, u32 bufferlen)
+{
+	u32 *eprambase;
+	u32 bytestosend;
+	int rc = 0;
+	struct xusb_udc *udc = ep->udc;
+
+	bytestosend = bufferlen;
+	if (udc->dma_enabled) {
+		if (ep->is_in)
+			rc = xudc_dma_send(ep, req, bufferptr, bufferlen);
+		else
+			rc = xudc_dma_receive(ep, req, bufferptr, bufferlen);
+		return rc;
+	}
+	/* Put the transmit buffer into the correct ping-pong buffer.*/
+	if (!ep->curbufnum && !ep->buffer0ready) {
+		/* Get the Buffer address and copy the transmit data.*/
+		eprambase = (u32 __force *)(udc->addr + ep->rambase);
+		if (ep->is_in) {
+			memcpy(eprambase, bufferptr, bytestosend);
+			udc->write_fn(udc->addr, ep->offset +
+				      XUSB_EP_BUF0COUNT_OFFSET, bufferlen);
+		} else {
+			memcpy(bufferptr, eprambase, bytestosend);
+		}
+		/*
+		 * Enable the buffer for transmission.
+		 */
+		udc->write_fn(udc->addr, XUSB_BUFFREADY_OFFSET,
+			      1 << ep->epnumber);
+		ep->buffer0ready = 1;
+		ep->curbufnum = 1;
+	} else if (ep->curbufnum && !ep->buffer1ready) {
+		/* Get the Buffer address and copy the transmit data.*/
+		eprambase = (u32 __force *)(udc->addr + ep->rambase +
+			     ep->ep_usb.maxpacket);
+		if (ep->is_in) {
+			memcpy(eprambase, bufferptr, bytestosend);
+			udc->write_fn(udc->addr, ep->offset +
+				      XUSB_EP_BUF1COUNT_OFFSET, bufferlen);
+		} else {
+			memcpy(bufferptr, eprambase, bytestosend);
+		}
+		/*
+		 * Enable the buffer for transmission.
+		 */
+		udc->write_fn(udc->addr, XUSB_BUFFREADY_OFFSET,
+			      1 << (ep->epnumber + XUSB_STATUS_EP_BUFF2_SHIFT));
+		ep->buffer1ready = 1;
+		ep->curbufnum = 0;
+	} else {
+		/* None of the ping-pong buffers are ready currently */
+		return -EAGAIN;
+	}
+	return rc;
+}
+
+/**
+ * xudc_done - Exeutes the endpoint data transfer completion tasks.
+ * @ep: pointer to the usb device endpoint structure.
+ * @req: pointer to the usb request structure.
+ * @status: Status of the data transfer.
+ *
+ * Deletes the message from the queue and updates data transfer completion
+ * status.
+ */
+static void xudc_done(struct xusb_ep *ep, struct xusb_req *req, int status)
+{
+	struct xusb_udc *udc = ep->udc;
+
+	list_del_init(&req->queue);
+
+	if (req->usb_req.status == -EINPROGRESS)
+		req->usb_req.status = status;
+	else
+		status = req->usb_req.status;
+
+	if (status && status != -ESHUTDOWN)
+		dev_dbg(udc->dev, "%s done %p, status %d\n",
+			ep->ep_usb.name, req, status);
+	/* unmap request if DMA is present*/
+	if (udc->dma_enabled && ep->epnumber && req->usb_req.length)
+		usb_gadget_unmap_request(&udc->gadget, &req->usb_req,
+					 ep->is_in);
+
+	if (req->usb_req.complete) {
+		spin_unlock(&udc->lock);
+		req->usb_req.complete(&ep->ep_usb, &req->usb_req);
+		spin_lock(&udc->lock);
+	}
+}
+
+/**
+ * xudc_read_fifo - Reads the data from the given endpoint buffer.
+ * @ep: pointer to the usb device endpoint structure.
+ * @req: pointer to the usb request structure.
+ *
+ * Return: 0 if request is completed and -EAGAIN if not completed.
+ *
+ * Pulls OUT packet data from the endpoint buffer.
+ */
+static int xudc_read_fifo(struct xusb_ep *ep, struct xusb_req *req)
+{
+	u8 *buf;
+	u32 is_short, count, bufferspace;
+	u8 bufoffset;
+	u8 two_pkts = 0;
+	int ret;
+	int retval = -EAGAIN;
+	struct xusb_udc *udc = ep->udc;
+
+	if (ep->buffer0ready && ep->buffer1ready) {
+		dev_dbg(udc->dev, "Packet NOT ready!\n");
+		return retval;
+	}
+top:
+	if (ep->curbufnum)
+		bufoffset = XUSB_EP_BUF1COUNT_OFFSET;
+	else
+		bufoffset = XUSB_EP_BUF0COUNT_OFFSET;
+
+	count = udc->read_fn(udc->addr + ep->offset + bufoffset);
+
+	if (!ep->buffer0ready && !ep->buffer1ready)
+		two_pkts = 1;
+
+	buf = req->usb_req.buf + req->usb_req.actual;
+	prefetchw(buf);
+	bufferspace = req->usb_req.length - req->usb_req.actual;
+	is_short = count < ep->ep_usb.maxpacket;
+
+	if (unlikely(!bufferspace)) {
+		/*
+		 * This happens when the driver's buffer
+		 * is smaller than what the host sent.
+		 * discard the extra data.
+		 */
+		if (req->usb_req.status != -EOVERFLOW)
+			dev_dbg(udc->dev, "%s overflow %d\n",
+				ep->ep_usb.name, count);
+		req->usb_req.status = -EOVERFLOW;
+		xudc_done(ep, req, -EOVERFLOW);
+		return 0;
+	}
+
+	ret = xudc_eptxrx(ep, req, buf, count);
+	switch (ret) {
+	case 0:
+		req->usb_req.actual += min(count, bufferspace);
+		dev_dbg(udc->dev, "read %s, %d bytes%s req %p %d/%d\n",
+			ep->ep_usb.name, count, is_short ? "/S" : "", req,
+			req->usb_req.actual, req->usb_req.length);
+		bufferspace -= count;
+		/* Completion */
+		if ((req->usb_req.actual == req->usb_req.length) || is_short) {
+			if (udc->dma_enabled && req->usb_req.length)
+				dma_sync_single_for_cpu(udc->dev,
+							req->usb_req.dma,
+							req->usb_req.actual,
+							DMA_FROM_DEVICE);
+			xudc_done(ep, req, 0);
+			return 0;
+		}
+		if (two_pkts) {
+			two_pkts = 0;
+			goto top;
+		}
+		break;
+	case -EAGAIN:
+		dev_dbg(udc->dev, "receive busy\n");
+		break;
+	case -EINVAL:
+	case -ETIMEDOUT:
+		/* DMA error, dequeue the request */
+		xudc_done(ep, req, -ECONNRESET);
+		retval = 0;
+		break;
+	}
+
+	return retval;
+}
+
+/**
+ * xudc_write_fifo - Writes data into the given endpoint buffer.
+ * @ep: pointer to the usb device endpoint structure.
+ * @req: pointer to the usb request structure.
+ *
+ * Return: 0 if request is completed and -EAGAIN if not completed.
+ *
+ * Loads endpoint buffer for an IN packet.
+ */
+static int xudc_write_fifo(struct xusb_ep *ep, struct xusb_req *req)
+{
+	u32 max;
+	u32 length;
+	int ret;
+	int retval = -EAGAIN;
+	struct xusb_udc *udc = ep->udc;
+	int is_last, is_short = 0;
+	u8 *buf;
+
+	max = le16_to_cpu(ep->desc->wMaxPacketSize);
+	buf = req->usb_req.buf + req->usb_req.actual;
+	prefetch(buf);
+	length = req->usb_req.length - req->usb_req.actual;
+	length = min(length, max);
+
+	ret = xudc_eptxrx(ep, req, buf, length);
+	switch (ret) {
+	case 0:
+		req->usb_req.actual += length;
+		if (unlikely(length != max)) {
+			is_last = is_short = 1;
+		} else {
+			if (likely(req->usb_req.length !=
+				   req->usb_req.actual) || req->usb_req.zero)
+				is_last = 0;
+			else
+				is_last = 1;
+		}
+		dev_dbg(udc->dev, "%s: wrote %s %d bytes%s%s %d left %p\n",
+			__func__, ep->ep_usb.name, length, is_last ? "/L" : "",
+			is_short ? "/S" : "",
+			req->usb_req.length - req->usb_req.actual, req);
+		/* completion */
+		if (is_last) {
+			xudc_done(ep, req, 0);
+			retval = 0;
+		}
+		break;
+	case -EAGAIN:
+		dev_dbg(udc->dev, "Send busy\n");
+		break;
+	case -EINVAL:
+	case -ETIMEDOUT:
+		/* DMA error, dequeue the request */
+		xudc_done(ep, req, -ECONNRESET);
+		retval = 0;
+		break;
+	}
+
+	return retval;
+}
+
+/**
+ * xudc_nuke - Cleans up the data transfer message list.
+ * @ep: pointer to the usb device endpoint structure.
+ * @status: Status of the data transfer.
+ */
+static void xudc_nuke(struct xusb_ep *ep, int status)
+{
+	struct xusb_req *req;
+
+	while (!list_empty(&ep->queue)) {
+		req = list_first_entry(&ep->queue, struct xusb_req, queue);
+		xudc_done(ep, req, status);
+	}
+}
+
+/**
+ * xudc_ep_set_halt - Stalls/unstalls the given endpoint.
+ * @_ep: pointer to the usb device endpoint structure.
+ * @value: value to indicate stall/unstall.
+ *
+ * Return: 0 for success and error value on failure
+ */
+static int xudc_ep_set_halt(struct usb_ep *_ep, int value)
+{
+	struct xusb_ep *ep = to_xusb_ep(_ep);
+	struct xusb_udc *udc;
+	unsigned long flags;
+	u32 epcfgreg;
+
+	if (!_ep || (!ep->desc && ep->epnumber)) {
+		pr_debug("%s: bad ep or descriptor\n", __func__);
+		return -EINVAL;
+	}
+	udc = ep->udc;
+
+	if (ep->is_in && (!list_empty(&ep->queue)) && value) {
+		dev_dbg(udc->dev, "requests pending can't halt\n");
+		return -EAGAIN;
+	}
+
+	if (ep->buffer0ready || ep->buffer1ready) {
+		dev_dbg(udc->dev, "HW buffers busy can't halt\n");
+		return -EAGAIN;
+	}
+
+	spin_lock_irqsave(&udc->lock, flags);
+
+	if (value) {
+		/* Stall the device.*/
+		epcfgreg = udc->read_fn(udc->addr + ep->offset);
+		epcfgreg |= XUSB_EP_CFG_STALL_MASK;
+		udc->write_fn(udc->addr, ep->offset, epcfgreg);
+	} else {
+		/* Unstall the device.*/
+		epcfgreg = udc->read_fn(udc->addr + ep->offset);
+		epcfgreg &= ~XUSB_EP_CFG_STALL_MASK;
+		udc->write_fn(udc->addr, ep->offset, epcfgreg);
+		if (ep->epnumber) {
+			/* Reset the toggle bit.*/
+			epcfgreg = udc->read_fn(ep->udc->addr + ep->offset);
+			epcfgreg &= ~XUSB_EP_CFG_DATA_TOGGLE_MASK;
+			udc->write_fn(udc->addr, ep->offset, epcfgreg);
+		}
+	}
+
+	spin_unlock_irqrestore(&udc->lock, flags);
+	return 0;
+}
+
+/**
+ * xudc_ep_enable - Enables the given endpoint.
+ * @ep: pointer to the xusb endpoint structure.
+ * @desc: pointer to usb endpoint descriptor.
+ *
+ * Return: 0 for success and error value on failure
+ */
+static int __xudc_ep_enable(struct xusb_ep *ep,
+			    const struct usb_endpoint_descriptor *desc)
+{
+	struct xusb_udc *udc = ep->udc;
+	u32 tmp;
+	u32 epcfg;
+	u32 ier;
+	u16 maxpacket;
+
+	ep->is_in = ((desc->bEndpointAddress & USB_DIR_IN) != 0);
+	/* Bit 3...0:endpoint number */
+	ep->epnumber = (desc->bEndpointAddress & 0x0f);
+	ep->desc = desc;
+	ep->ep_usb.desc = desc;
+	tmp = desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK;
+	ep->ep_usb.maxpacket = maxpacket = le16_to_cpu(desc->wMaxPacketSize);
+
+	switch (tmp) {
+	case USB_ENDPOINT_XFER_CONTROL:
+		dev_dbg(udc->dev, "only one control endpoint\n");
+		/* NON- ISO */
+		ep->is_iso = 0;
+		return -EINVAL;
+	case USB_ENDPOINT_XFER_INT:
+		/* NON- ISO */
+		ep->is_iso = 0;
+		if (maxpacket > 64) {
+			dev_dbg(udc->dev, "bogus maxpacket %d\n", maxpacket);
+			return -EINVAL;
+		}
+		break;
+	case USB_ENDPOINT_XFER_BULK:
+		/* NON- ISO */
+		ep->is_iso = 0;
+		if (!(is_power_of_2(maxpacket) && maxpacket >= 8 &&
+				maxpacket <= 512)) {
+			dev_dbg(udc->dev, "bogus maxpacket %d\n", maxpacket);
+			return -EINVAL;
+		}
+		break;
+	case USB_ENDPOINT_XFER_ISOC:
+		/* ISO */
+		ep->is_iso = 1;
+		break;
+	}
+
+	ep->buffer0ready = 0;
+	ep->buffer1ready = 0;
+	ep->curbufnum = 0;
+	ep->rambase = rambase[ep->epnumber];
+	xudc_epconfig(ep, udc);
+
+	dev_dbg(udc->dev, "Enable Endpoint %d max pkt is %d\n",
+		ep->epnumber, maxpacket);
+
+	/* Enable the End point.*/
+	epcfg = udc->read_fn(udc->addr + ep->offset);
+	epcfg |= XUSB_EP_CFG_VALID_MASK;
+	udc->write_fn(udc->addr, ep->offset, epcfg);
+	if (ep->epnumber)
+		ep->rambase <<= 2;
+
+	/* Enable buffer completion interrupts for endpoint */
+	ier = udc->read_fn(udc->addr + XUSB_IER_OFFSET);
+	ier |= (XUSB_STATUS_INTR_BUFF_COMP_SHIFT_MASK << ep->epnumber);
+	udc->write_fn(udc->addr, XUSB_IER_OFFSET, ier);
+
+	/* for OUT endpoint set buffers ready to receive */
+	if (ep->epnumber && !ep->is_in) {
+		udc->write_fn(udc->addr, XUSB_BUFFREADY_OFFSET,
+			      1 << ep->epnumber);
+		ep->buffer0ready = 1;
+		udc->write_fn(udc->addr, XUSB_BUFFREADY_OFFSET,
+			     (1 << (ep->epnumber +
+			      XUSB_STATUS_EP_BUFF2_SHIFT)));
+		ep->buffer1ready = 1;
+	}
+
+	return 0;
+}
+
+/**
+ * xudc_ep_enable - Enables the given endpoint.
+ * @_ep: pointer to the usb endpoint structure.
+ * @desc: pointer to usb endpoint descriptor.
+ *
+ * Return: 0 for success and error value on failure
+ */
+static int xudc_ep_enable(struct usb_ep *_ep,
+			  const struct usb_endpoint_descriptor *desc)
+{
+	struct xusb_ep *ep;
+	struct xusb_udc *udc;
+	unsigned long flags;
+	int ret;
+
+	if (!_ep || !desc || desc->bDescriptorType != USB_DT_ENDPOINT) {
+		pr_debug("%s: bad ep or descriptor\n", __func__);
+		return -EINVAL;
+	}
+
+	ep = to_xusb_ep(_ep);
+	udc = ep->udc;
+
+	if (!udc->driver || udc->gadget.speed == USB_SPEED_UNKNOWN) {
+		dev_dbg(udc->dev, "bogus device state\n");
+		return -ESHUTDOWN;
+	}
+
+	spin_lock_irqsave(&udc->lock, flags);
+	ret = __xudc_ep_enable(ep, desc);
+	spin_unlock_irqrestore(&udc->lock, flags);
+
+	return ret;
+}
+
+/**
+ * xudc_ep_disable - Disables the given endpoint.
+ * @_ep: pointer to the usb endpoint structure.
+ *
+ * Return: 0 for success and error value on failure
+ */
+static int xudc_ep_disable(struct usb_ep *_ep)
+{
+	struct xusb_ep *ep;
+	unsigned long flags;
+	u32 epcfg;
+	struct xusb_udc *udc;
+
+	if (!_ep) {
+		pr_debug("%s: invalid ep\n", __func__);
+		return -EINVAL;
+	}
+
+	ep = to_xusb_ep(_ep);
+	udc = ep->udc;
+
+	spin_lock_irqsave(&udc->lock, flags);
+
+	xudc_nuke(ep, -ESHUTDOWN);
+
+	/* Restore the endpoint's pristine config */
+	ep->desc = NULL;
+	ep->ep_usb.desc = NULL;
+
+	dev_dbg(udc->dev, "USB Ep %d disable\n ", ep->epnumber);
+	/* Disable the endpoint.*/
+	epcfg = udc->read_fn(udc->addr + ep->offset);
+	epcfg &= ~XUSB_EP_CFG_VALID_MASK;
+	udc->write_fn(udc->addr, ep->offset, epcfg);
+
+	spin_unlock_irqrestore(&udc->lock, flags);
+	return 0;
+}
+
+/**
+ * xudc_ep_alloc_request - Initializes the request queue.
+ * @_ep: pointer to the usb endpoint structure.
+ * @gfp_flags: Flags related to the request call.
+ *
+ * Return: pointer to request structure on success and a NULL on failure.
+ */
+static struct usb_request *xudc_ep_alloc_request(struct usb_ep *_ep,
+						 gfp_t gfp_flags)
+{
+	struct xusb_ep *ep = to_xusb_ep(_ep);
+	struct xusb_udc *udc;
+	struct xusb_req *req;
+
+	udc = ep->udc;
+	req = kzalloc(sizeof(*req), gfp_flags);
+	if (!req) {
+		dev_err(udc->dev, "%s:not enough memory", __func__);
+		return NULL;
+	}
+
+	req->ep = ep;
+	INIT_LIST_HEAD(&req->queue);
+	return &req->usb_req;
+}
+
+/**
+ * xudc_free_request - Releases the request from queue.
+ * @_ep: pointer to the usb device endpoint structure.
+ * @_req: pointer to the usb request structure.
+ */
+static void xudc_free_request(struct usb_ep *_ep, struct usb_request *_req)
+{
+	struct xusb_req *req = to_xusb_req(_req);
+
+	kfree(req);
+}
+
+/**
+ * xudc_ep0_queue - Adds the request to endpoint 0 queue.
+ * @ep0: pointer to the xusb endpoint 0 structure.
+ * @req: pointer to the xusb request structure.
+ *
+ * Return: 0 for success and error value on failure
+ */
+static int __xudc_ep0_queue(struct xusb_ep *ep0, struct xusb_req *req)
+{
+	struct xusb_udc *udc = ep0->udc;
+	u32 length;
+	u8 *corebuf;
+
+	if (!udc->driver || udc->gadget.speed == USB_SPEED_UNKNOWN) {
+		dev_dbg(udc->dev, "%s, bogus device state\n", __func__);
+		return -EINVAL;
+	}
+	if (!list_empty(&ep0->queue)) {
+		dev_dbg(udc->dev, "%s:ep0 busy\n", __func__);
+		return -EBUSY;
+	}
+
+	req->usb_req.status = -EINPROGRESS;
+	req->usb_req.actual = 0;
+
+	list_add_tail(&req->queue, &ep0->queue);
+
+	if (udc->setup.bRequestType & USB_DIR_IN) {
+		prefetch(req->usb_req.buf);
+		length = req->usb_req.length;
+		corebuf = (void __force *) ((ep0->rambase << 2) +
+			   udc->addr);
+		length = req->usb_req.actual = min_t(u32, length,
+						     EP0_MAX_PACKET);
+		memcpy(corebuf, req->usb_req.buf, length);
+		udc->write_fn(udc->addr, XUSB_EP_BUF0COUNT_OFFSET, length);
+		udc->write_fn(udc->addr, XUSB_BUFFREADY_OFFSET, 1);
+	} else {
+		if (udc->setup.wLength) {
+			/* Enable EP0 buffer to receive data */
+			udc->write_fn(udc->addr, XUSB_EP_BUF0COUNT_OFFSET, 0);
+			udc->write_fn(udc->addr, XUSB_BUFFREADY_OFFSET, 1);
+		} else {
+			xudc_wrstatus(udc);
+		}
+	}
+
+	return 0;
+}
+
+/**
+ * xudc_ep0_queue - Adds the request to endpoint 0 queue.
+ * @_ep: pointer to the usb endpoint 0 structure.
+ * @_req: pointer to the usb request structure.
+ * @gfp_flags: Flags related to the request call.
+ *
+ * Return: 0 for success and error value on failure
+ */
+static int xudc_ep0_queue(struct usb_ep *_ep, struct usb_request *_req,
+			  gfp_t gfp_flags)
+{
+	struct xusb_req *req	= to_xusb_req(_req);
+	struct xusb_ep	*ep0	= to_xusb_ep(_ep);
+	struct xusb_udc *udc	= ep0->udc;
+	unsigned long flags;
+	int ret;
+
+	spin_lock_irqsave(&udc->lock, flags);
+	ret = __xudc_ep0_queue(ep0, req);
+	spin_unlock_irqrestore(&udc->lock, flags);
+
+	return ret;
+}
+
+/**
+ * xudc_ep_queue - Adds the request to endpoint queue.
+ * @_ep: pointer to the usb endpoint structure.
+ * @_req: pointer to the usb request structure.
+ * @gfp_flags: Flags related to the request call.
+ *
+ * Return: 0 for success and error value on failure
+ */
+static int xudc_ep_queue(struct usb_ep *_ep, struct usb_request *_req,
+			 gfp_t gfp_flags)
+{
+	struct xusb_req *req = to_xusb_req(_req);
+	struct xusb_ep	*ep  = to_xusb_ep(_ep);
+	struct xusb_udc *udc = ep->udc;
+	int  ret;
+	unsigned long flags;
+
+	if (!ep->desc) {
+		dev_dbg(udc->dev, "%s:queing request to disabled %s\n",
+			__func__, ep->name);
+		return -ESHUTDOWN;
+	}
+
+	if (!udc->driver || udc->gadget.speed == USB_SPEED_UNKNOWN) {
+		dev_dbg(udc->dev, "%s, bogus device state\n", __func__);
+		return -EINVAL;
+	}
+
+	spin_lock_irqsave(&udc->lock, flags);
+
+	_req->status = -EINPROGRESS;
+	_req->actual = 0;
+
+	if (udc->dma_enabled) {
+		ret = usb_gadget_map_request(&udc->gadget, &req->usb_req,
+					     ep->is_in);
+		if (ret) {
+			dev_dbg(udc->dev, "gadget_map failed ep%d\n",
+				ep->epnumber);
+			spin_unlock_irqrestore(&udc->lock, flags);
+			return -EAGAIN;
+		}
+	}
+
+	if (list_empty(&ep->queue)) {
+		if (ep->is_in) {
+			dev_dbg(udc->dev, "xudc_write_fifo from ep_queue\n");
+			if (!xudc_write_fifo(ep, req))
+				req = NULL;
+		} else {
+			dev_dbg(udc->dev, "xudc_read_fifo from ep_queue\n");
+			if (!xudc_read_fifo(ep, req))
+				req = NULL;
+		}
+	}
+
+	if (req != NULL)
+		list_add_tail(&req->queue, &ep->queue);
+
+	spin_unlock_irqrestore(&udc->lock, flags);
+	return 0;
+}
+
+/**
+ * xudc_ep_dequeue - Removes the request from the queue.
+ * @_ep: pointer to the usb device endpoint structure.
+ * @_req: pointer to the usb request structure.
+ *
+ * Return: 0 for success and error value on failure
+ */
+static int xudc_ep_dequeue(struct usb_ep *_ep, struct usb_request *_req)
+{
+	struct xusb_ep *ep	= to_xusb_ep(_ep);
+	struct xusb_req *req	= to_xusb_req(_req);
+	struct xusb_udc *udc	= ep->udc;
+	unsigned long flags;
+
+	spin_lock_irqsave(&udc->lock, flags);
+	/* Make sure it's actually queued on this endpoint */
+	list_for_each_entry(req, &ep->queue, queue) {
+		if (&req->usb_req == _req)
+			break;
+	}
+	if (&req->usb_req != _req) {
+		spin_unlock_irqrestore(&ep->udc->lock, flags);
+		return -EINVAL;
+	}
+	xudc_done(ep, req, -ECONNRESET);
+	spin_unlock_irqrestore(&udc->lock, flags);
+
+	return 0;
+}
+
+/**
+ * xudc_ep0_enable - Enables the given endpoint.
+ * @ep: pointer to the usb endpoint structure.
+ * @desc: pointer to usb endpoint descriptor.
+ *
+ * Return: error always.
+ *
+ * endpoint 0 enable should not be called by gadget layer.
+ */
+static int xudc_ep0_enable(struct usb_ep *ep,
+			   const struct usb_endpoint_descriptor *desc)
+{
+	return -EINVAL;
+}
+
+/**
+ * xudc_ep0_disable - Disables the given endpoint.
+ * @ep: pointer to the usb endpoint structure.
+ *
+ * Return: error always.
+ *
+ * endpoint 0 disable should not be called by gadget layer.
+ */
+static int xudc_ep0_disable(struct usb_ep *ep)
+{
+	return -EINVAL;
+}
+
+static const struct usb_ep_ops xusb_ep0_ops = {
+	.enable		= xudc_ep0_enable,
+	.disable	= xudc_ep0_disable,
+	.alloc_request	= xudc_ep_alloc_request,
+	.free_request	= xudc_free_request,
+	.queue		= xudc_ep0_queue,
+	.dequeue	= xudc_ep_dequeue,
+	.set_halt	= xudc_ep_set_halt,
+};
+
+static const struct usb_ep_ops xusb_ep_ops = {
+	.enable		= xudc_ep_enable,
+	.disable	= xudc_ep_disable,
+	.alloc_request	= xudc_ep_alloc_request,
+	.free_request	= xudc_free_request,
+	.queue		= xudc_ep_queue,
+	.dequeue	= xudc_ep_dequeue,
+	.set_halt	= xudc_ep_set_halt,
+};
+
+/**
+ * xudc_get_frame - Reads the current usb frame number.
+ * @gadget: pointer to the usb gadget structure.
+ *
+ * Return: current frame number for success and error value on failure.
+ */
+static int xudc_get_frame(struct usb_gadget *gadget)
+{
+	struct xusb_udc *udc;
+	int frame;
+
+	if (!gadget)
+		return -ENODEV;
+
+	udc = to_udc(gadget);
+	frame = udc->read_fn(udc->addr + XUSB_FRAMENUM_OFFSET);
+	return frame;
+}
+
+/**
+ * xudc_wakeup - Send remote wakeup signal to host
+ * @gadget: pointer to the usb gadget structure.
+ *
+ * Return: 0 on success and error on failure
+ */
+static int xudc_wakeup(struct usb_gadget *gadget)
+{
+	struct xusb_udc *udc = to_udc(gadget);
+	u32 crtlreg;
+	int status = -EINVAL;
+	unsigned long flags;
+
+	spin_lock_irqsave(&udc->lock, flags);
+
+	/* Remote wake up not enabled by host */
+	if (!udc->remote_wkp)
+		goto done;
+
+	crtlreg = udc->read_fn(udc->addr + XUSB_CONTROL_OFFSET);
+	crtlreg |= XUSB_CONTROL_USB_RMTWAKE_MASK;
+	/* set remote wake up bit */
+	udc->write_fn(udc->addr, XUSB_CONTROL_OFFSET, crtlreg);
+	/*
+	 * wait for a while and reset remote wake up bit since this bit
+	 * is not cleared by HW after sending remote wakeup to host.
+	 */
+	mdelay(2);
+
+	crtlreg &= ~XUSB_CONTROL_USB_RMTWAKE_MASK;
+	udc->write_fn(udc->addr, XUSB_CONTROL_OFFSET, crtlreg);
+	status = 0;
+done:
+	spin_unlock_irqrestore(&udc->lock, flags);
+	return status;
+}
+
+/**
+ * xudc_pullup - start/stop USB traffic
+ * @gadget: pointer to the usb gadget structure.
+ * @is_on: flag to start or stop
+ *
+ * Return: 0 always
+ *
+ * This function starts/stops SIE engine of IP based on is_on.
+ */
+static int xudc_pullup(struct usb_gadget *gadget, int is_on)
+{
+	struct xusb_udc *udc = to_udc(gadget);
+	unsigned long flags;
+	u32 crtlreg;
+
+	spin_lock_irqsave(&udc->lock, flags);
+
+	crtlreg = udc->read_fn(udc->addr + XUSB_CONTROL_OFFSET);
+	if (is_on)
+		crtlreg |= XUSB_CONTROL_USB_READY_MASK;
+	else
+		crtlreg &= ~XUSB_CONTROL_USB_READY_MASK;
+
+	udc->write_fn(udc->addr, XUSB_CONTROL_OFFSET, crtlreg);
+
+	spin_unlock_irqrestore(&udc->lock, flags);
+
+	return 0;
+}
+
+/**
+ * xudc_eps_init - initialize endpoints.
+ * @udc: pointer to the usb device controller structure.
+ */
+static void xudc_eps_init(struct xusb_udc *udc)
+{
+	u32 ep_number;
+
+	INIT_LIST_HEAD(&udc->gadget.ep_list);
+
+	for (ep_number = 0; ep_number < XUSB_MAX_ENDPOINTS; ep_number++) {
+		struct xusb_ep *ep = &udc->ep[ep_number];
+
+		if (ep_number) {
+			list_add_tail(&ep->ep_usb.ep_list,
+				      &udc->gadget.ep_list);
+			usb_ep_set_maxpacket_limit(&ep->ep_usb,
+						  (unsigned short) ~0);
+			snprintf(ep->name, EPNAME_SIZE, "ep%d", ep_number);
+			ep->ep_usb.name = ep->name;
+			ep->ep_usb.ops = &xusb_ep_ops;
+		} else {
+			ep->ep_usb.name = ep0name;
+			usb_ep_set_maxpacket_limit(&ep->ep_usb, EP0_MAX_PACKET);
+			ep->ep_usb.ops = &xusb_ep0_ops;
+		}
+
+		ep->udc = udc;
+		ep->epnumber = ep_number;
+		ep->desc = NULL;
+		/*
+		 * The configuration register address offset between
+		 * each endpoint is 0x10.
+		 */
+		ep->offset = XUSB_EP0_CONFIG_OFFSET + (ep_number * 0x10);
+		ep->is_in = 0;
+		ep->is_iso = 0;
+		ep->maxpacket = 0;
+		xudc_epconfig(ep, udc);
+
+		/* Initialize one queue per endpoint */
+		INIT_LIST_HEAD(&ep->queue);
+	}
+}
+
+/**
+ * xudc_stop_activity - Stops any further activity on the device.
+ * @udc: pointer to the usb device controller structure.
+ */
+static void xudc_stop_activity(struct xusb_udc *udc)
+{
+	int i;
+	struct xusb_ep *ep;
+
+	for (i = 0; i < XUSB_MAX_ENDPOINTS; i++) {
+		ep = &udc->ep[i];
+		xudc_nuke(ep, -ESHUTDOWN);
+	}
+}
+
+/**
+ * xudc_start - Starts the device.
+ * @gadget: pointer to the usb gadget structure
+ * @driver: pointer to gadget driver structure
+ *
+ * Return: zero on success and error on failure
+ */
+static int xudc_start(struct usb_gadget *gadget,
+		      struct usb_gadget_driver *driver)
+{
+	struct xusb_udc *udc	= to_udc(gadget);
+	struct xusb_ep *ep0	= &udc->ep[XUSB_EP_NUMBER_ZERO];
+	const struct usb_endpoint_descriptor *desc = &config_bulk_out_desc;
+	unsigned long flags;
+	int ret = 0;
+
+	spin_lock_irqsave(&udc->lock, flags);
+
+	if (udc->driver) {
+		dev_err(udc->dev, "%s is already bound to %s\n",
+			udc->gadget.name, udc->driver->driver.name);
+		ret = -EBUSY;
+		goto err;
+	}
+
+	/* hook up the driver */
+	udc->driver = driver;
+	udc->gadget.speed = driver->max_speed;
+
+	/* Enable the control endpoint. */
+	ret = __xudc_ep_enable(ep0, desc);
+
+	/* Set device address and remote wakeup to 0 */
+	udc->write_fn(udc->addr, XUSB_ADDRESS_OFFSET, 0);
+	udc->remote_wkp = 0;
+err:
+	spin_unlock_irqrestore(&udc->lock, flags);
+	return ret;
+}
+
+/**
+ * xudc_stop - stops the device.
+ * @gadget: pointer to the usb gadget structure
+ * @driver: pointer to usb gadget driver structure
+ *
+ * Return: zero always
+ */
+static int xudc_stop(struct usb_gadget *gadget,
+		     struct usb_gadget_driver *driver)
+{
+	struct xusb_udc *udc = to_udc(gadget);
+	unsigned long flags;
+
+	spin_lock_irqsave(&udc->lock, flags);
+
+	udc->gadget.speed = USB_SPEED_UNKNOWN;
+	udc->driver = NULL;
+
+	/* Set device address and remote wakeup to 0 */
+	udc->write_fn(udc->addr, XUSB_ADDRESS_OFFSET, 0);
+	udc->remote_wkp = 0;
+
+	xudc_stop_activity(udc);
+
+	spin_unlock_irqrestore(&udc->lock, flags);
+
+	return 0;
+}
+
+static const struct usb_gadget_ops xusb_udc_ops = {
+	.get_frame	= xudc_get_frame,
+	.wakeup		= xudc_wakeup,
+	.pullup		= xudc_pullup,
+	.udc_start	= xudc_start,
+	.udc_stop	= xudc_stop,
+};
+
+/**
+ * xudc_clear_stall_all_ep - clears stall of every endpoint.
+ * @udc: pointer to the udc structure.
+ */
+static void xudc_clear_stall_all_ep(struct xusb_udc *udc)
+{
+	struct xusb_ep *ep;
+	u32 epcfgreg;
+	int i;
+
+	for (i = 0; i < XUSB_MAX_ENDPOINTS; i++) {
+		ep = &udc->ep[i];
+		epcfgreg = udc->read_fn(udc->addr + ep->offset);
+		epcfgreg &= ~XUSB_EP_CFG_STALL_MASK;
+		udc->write_fn(udc->addr, ep->offset, epcfgreg);
+		if (ep->epnumber) {
+			/* Reset the toggle bit.*/
+			epcfgreg = udc->read_fn(udc->addr + ep->offset);
+			epcfgreg &= ~XUSB_EP_CFG_DATA_TOGGLE_MASK;
+			udc->write_fn(udc->addr, ep->offset, epcfgreg);
+		}
+	}
+}
+
+/**
+ * xudc_startup_handler - The usb device controller interrupt handler.
+ * @udc: pointer to the udc structure.
+ * @intrstatus: The mask value containing the interrupt sources.
+ *
+ * This function handles the RESET,SUSPEND,RESUME and DISCONNECT interrupts.
+ */
+static void xudc_startup_handler(struct xusb_udc *udc, u32 intrstatus)
+{
+	u32 intrreg;
+
+	if (intrstatus & XUSB_STATUS_RESET_MASK) {
+
+		dev_dbg(udc->dev, "Reset\n");
+
+		if (intrstatus & XUSB_STATUS_HIGH_SPEED_MASK)
+			udc->gadget.speed = USB_SPEED_HIGH;
+		else
+			udc->gadget.speed = USB_SPEED_FULL;
+
+		xudc_stop_activity(udc);
+		xudc_clear_stall_all_ep(udc);
+		udc->write_fn(udc->addr, XUSB_TESTMODE_OFFSET, 0);
+
+		/* Set device address and remote wakeup to 0 */
+		udc->write_fn(udc->addr, XUSB_ADDRESS_OFFSET, 0);
+		udc->remote_wkp = 0;
+
+		/* Enable the suspend, resume and disconnect */
+		intrreg = udc->read_fn(udc->addr + XUSB_IER_OFFSET);
+		intrreg |= XUSB_STATUS_SUSPEND_MASK | XUSB_STATUS_RESUME_MASK |
+			   XUSB_STATUS_DISCONNECT_MASK;
+		udc->write_fn(udc->addr, XUSB_IER_OFFSET, intrreg);
+	}
+	if (intrstatus & XUSB_STATUS_SUSPEND_MASK) {
+
+		dev_dbg(udc->dev, "Suspend\n");
+
+		/* Enable the reset, resume and disconnect */
+		intrreg = udc->read_fn(udc->addr + XUSB_IER_OFFSET);
+		intrreg |= XUSB_STATUS_RESET_MASK | XUSB_STATUS_RESUME_MASK |
+			   XUSB_STATUS_DISCONNECT_MASK;
+		udc->write_fn(udc->addr, XUSB_IER_OFFSET, intrreg);
+
+		udc->usb_state = USB_STATE_SUSPENDED;
+
+		if (udc->driver->suspend) {
+			spin_unlock(&udc->lock);
+			udc->driver->suspend(&udc->gadget);
+			spin_lock(&udc->lock);
+		}
+	}
+	if (intrstatus & XUSB_STATUS_RESUME_MASK) {
+		bool condition = (udc->usb_state != USB_STATE_SUSPENDED);
+
+		dev_WARN_ONCE(udc->dev, condition,
+				"Resume IRQ while not suspended\n");
+
+		dev_dbg(udc->dev, "Resume\n");
+
+		/* Enable the reset, suspend and disconnect */
+		intrreg = udc->read_fn(udc->addr + XUSB_IER_OFFSET);
+		intrreg |= XUSB_STATUS_RESET_MASK | XUSB_STATUS_SUSPEND_MASK |
+			   XUSB_STATUS_DISCONNECT_MASK;
+		udc->write_fn(udc->addr, XUSB_IER_OFFSET, intrreg);
+
+		udc->usb_state = 0;
+
+		if (udc->driver->resume) {
+			spin_unlock(&udc->lock);
+			udc->driver->resume(&udc->gadget);
+			spin_lock(&udc->lock);
+		}
+	}
+	if (intrstatus & XUSB_STATUS_DISCONNECT_MASK) {
+
+		dev_dbg(udc->dev, "Disconnect\n");
+
+		/* Enable the reset, resume and suspend */
+		intrreg = udc->read_fn(udc->addr + XUSB_IER_OFFSET);
+		intrreg |= XUSB_STATUS_RESET_MASK | XUSB_STATUS_RESUME_MASK |
+			   XUSB_STATUS_SUSPEND_MASK;
+		udc->write_fn(udc->addr, XUSB_IER_OFFSET, intrreg);
+
+		if (udc->driver && udc->driver->disconnect) {
+			spin_unlock(&udc->lock);
+			udc->driver->disconnect(&udc->gadget);
+			spin_lock(&udc->lock);
+		}
+	}
+}
+
+/**
+ * xudc_ep0_stall - Stall endpoint zero.
+ * @udc: pointer to the udc structure.
+ *
+ * This function stalls endpoint zero.
+ */
+static void xudc_ep0_stall(struct xusb_udc *udc)
+{
+	u32 epcfgreg;
+	struct xusb_ep *ep0 = &udc->ep[XUSB_EP_NUMBER_ZERO];
+
+	epcfgreg = udc->read_fn(udc->addr + ep0->offset);
+	epcfgreg |= XUSB_EP_CFG_STALL_MASK;
+	udc->write_fn(udc->addr, ep0->offset, epcfgreg);
+}
+
+/**
+ * xudc_setaddress - executes SET_ADDRESS command
+ * @udc: pointer to the udc structure.
+ *
+ * This function executes USB SET_ADDRESS command
+ */
+static void xudc_setaddress(struct xusb_udc *udc)
+{
+	struct xusb_ep *ep0	= &udc->ep[0];
+	struct xusb_req *req	= udc->req;
+	int ret;
+
+	req->usb_req.length = 0;
+	ret = __xudc_ep0_queue(ep0, req);
+	if (ret == 0)
+		return;
+
+	dev_err(udc->dev, "Can't respond to SET ADDRESS request\n");
+	xudc_ep0_stall(udc);
+}
+
+/**
+ * xudc_getstatus - executes GET_STATUS command
+ * @udc: pointer to the udc structure.
+ *
+ * This function executes USB GET_STATUS command
+ */
+static void xudc_getstatus(struct xusb_udc *udc)
+{
+	struct xusb_ep *ep0	= &udc->ep[0];
+	struct xusb_req *req	= udc->req;
+	struct xusb_ep *target_ep;
+	u16 status = 0;
+	u32 epcfgreg;
+	int epnum;
+	u32 halt;
+	int ret;
+
+	switch (udc->setup.bRequestType & USB_RECIP_MASK) {
+	case USB_RECIP_DEVICE:
+		/* Get device status */
+		status = 1 << USB_DEVICE_SELF_POWERED;
+		if (udc->remote_wkp)
+			status |= (1 << USB_DEVICE_REMOTE_WAKEUP);
+		break;
+	case USB_RECIP_INTERFACE:
+		break;
+	case USB_RECIP_ENDPOINT:
+		epnum = udc->setup.wIndex & USB_ENDPOINT_NUMBER_MASK;
+		target_ep = &udc->ep[epnum];
+		epcfgreg = udc->read_fn(udc->addr + target_ep->offset);
+		halt = epcfgreg & XUSB_EP_CFG_STALL_MASK;
+		if (udc->setup.wIndex & USB_DIR_IN) {
+			if (!target_ep->is_in)
+				goto stall;
+		} else {
+			if (target_ep->is_in)
+				goto stall;
+		}
+		if (halt)
+			status = 1 << USB_ENDPOINT_HALT;
+		break;
+	default:
+		goto stall;
+	}
+
+	req->usb_req.length = 2;
+	*(u16 *)req->usb_req.buf = cpu_to_le16(status);
+	ret = __xudc_ep0_queue(ep0, req);
+	if (ret == 0)
+		return;
+stall:
+	dev_err(udc->dev, "Can't respond to getstatus request\n");
+	xudc_ep0_stall(udc);
+}
+
+/**
+ * xudc_set_clear_feature - Executes the set feature and clear feature commands.
+ * @udc: pointer to the usb device controller structure.
+ *
+ * Processes the SET_FEATURE and CLEAR_FEATURE commands.
+ */
+static void xudc_set_clear_feature(struct xusb_udc *udc)
+{
+	struct xusb_ep *ep0	= &udc->ep[0];
+	struct xusb_req *req	= udc->req;
+	struct xusb_ep *target_ep;
+	u8 endpoint;
+	u8 outinbit;
+	u32 epcfgreg;
+	int flag = (udc->setup.bRequest == USB_REQ_SET_FEATURE ? 1 : 0);
+	int ret;
+
+	switch (udc->setup.bRequestType) {
+	case USB_RECIP_DEVICE:
+		switch (udc->setup.wValue) {
+		case USB_DEVICE_TEST_MODE:
+			/*
+			 * The Test Mode will be executed
+			 * after the status phase.
+			 */
+			break;
+		case USB_DEVICE_REMOTE_WAKEUP:
+			if (flag)
+				udc->remote_wkp = 1;
+			else
+				udc->remote_wkp = 0;
+			break;
+		default:
+			xudc_ep0_stall(udc);
+			break;
+		}
+		break;
+	case USB_RECIP_ENDPOINT:
+		if (!udc->setup.wValue) {
+			endpoint = udc->setup.wIndex & USB_ENDPOINT_NUMBER_MASK;
+			target_ep = &udc->ep[endpoint];
+			outinbit = udc->setup.wIndex & USB_ENDPOINT_DIR_MASK;
+			outinbit = outinbit >> 7;
+
+			/* Make sure direction matches.*/
+			if (outinbit != target_ep->is_in) {
+				xudc_ep0_stall(udc);
+				return;
+			}
+			epcfgreg = udc->read_fn(udc->addr + target_ep->offset);
+			if (!endpoint) {
+				/* Clear the stall.*/
+				epcfgreg &= ~XUSB_EP_CFG_STALL_MASK;
+				udc->write_fn(udc->addr,
+					      target_ep->offset, epcfgreg);
+			} else {
+				if (flag) {
+					epcfgreg |= XUSB_EP_CFG_STALL_MASK;
+					udc->write_fn(udc->addr,
+						      target_ep->offset,
+						      epcfgreg);
+				} else {
+					/* Unstall the endpoint.*/
+					epcfgreg &= ~(XUSB_EP_CFG_STALL_MASK |
+						XUSB_EP_CFG_DATA_TOGGLE_MASK);
+					udc->write_fn(udc->addr,
+						      target_ep->offset,
+						      epcfgreg);
+				}
+			}
+		}
+		break;
+	default:
+		xudc_ep0_stall(udc);
+		return;
+	}
+
+	req->usb_req.length = 0;
+	ret = __xudc_ep0_queue(ep0, req);
+	if (ret == 0)
+		return;
+
+	dev_err(udc->dev, "Can't respond to SET/CLEAR FEATURE\n");
+	xudc_ep0_stall(udc);
+}
+
+/**
+ * xudc_handle_setup - Processes the setup packet.
+ * @udc: pointer to the usb device controller structure.
+ *
+ * Process setup packet and delegate to gadget layer.
+ */
+static void xudc_handle_setup(struct xusb_udc *udc)
+{
+	struct xusb_ep *ep0 = &udc->ep[0];
+	struct usb_ctrlrequest setup;
+	u32 *ep0rambase;
+
+	/* Load up the chapter 9 command buffer.*/
+	ep0rambase = (u32 __force *) (udc->addr + XUSB_SETUP_PKT_ADDR_OFFSET);
+	memcpy(&setup, ep0rambase, 8);
+
+	udc->setup = setup;
+	udc->setup.wValue = cpu_to_le16(setup.wValue);
+	udc->setup.wIndex = cpu_to_le16(setup.wIndex);
+	udc->setup.wLength = cpu_to_le16(setup.wLength);
+
+	/* Clear previous requests */
+	xudc_nuke(ep0, -ECONNRESET);
+
+	if (udc->setup.bRequestType & USB_DIR_IN) {
+		/* Execute the get command.*/
+		udc->setupseqrx = STATUS_PHASE;
+		udc->setupseqtx = DATA_PHASE;
+	} else {
+		/* Execute the put command.*/
+		udc->setupseqrx = DATA_PHASE;
+		udc->setupseqtx = STATUS_PHASE;
+	}
+
+	switch (udc->setup.bRequest) {
+	case USB_REQ_GET_STATUS:
+		/* Data+Status phase form udc */
+		if ((udc->setup.bRequestType &
+				(USB_DIR_IN | USB_TYPE_MASK)) !=
+				(USB_DIR_IN | USB_TYPE_STANDARD))
+			break;
+		xudc_getstatus(udc);
+		return;
+	case USB_REQ_SET_ADDRESS:
+		/* Status phase from udc */
+		if (udc->setup.bRequestType != (USB_DIR_OUT |
+				USB_TYPE_STANDARD | USB_RECIP_DEVICE))
+			break;
+		xudc_setaddress(udc);
+		return;
+	case USB_REQ_CLEAR_FEATURE:
+	case USB_REQ_SET_FEATURE:
+		/* Requests with no data phase, status phase from udc */
+		if ((udc->setup.bRequestType & USB_TYPE_MASK)
+				!= USB_TYPE_STANDARD)
+			break;
+		xudc_set_clear_feature(udc);
+		return;
+	default:
+		break;
+	}
+
+	spin_unlock(&udc->lock);
+	if (udc->driver->setup(&udc->gadget, &setup) < 0)
+		xudc_ep0_stall(udc);
+	spin_lock(&udc->lock);
+}
+
+/**
+ * xudc_ep0_out - Processes the endpoint 0 OUT token.
+ * @udc: pointer to the usb device controller structure.
+ */
+static void xudc_ep0_out(struct xusb_udc *udc)
+{
+	struct xusb_ep *ep0 = &udc->ep[0];
+	struct xusb_req *req;
+	u8 *ep0rambase;
+	unsigned int bytes_to_rx;
+	void *buffer;
+
+	req = list_first_entry(&ep0->queue, struct xusb_req, queue);
+
+	switch (udc->setupseqrx) {
+	case STATUS_PHASE:
+		/*
+		 * This resets both state machines for the next
+		 * Setup packet.
+		 */
+		udc->setupseqrx = SETUP_PHASE;
+		udc->setupseqtx = SETUP_PHASE;
+		req->usb_req.actual = req->usb_req.length;
+		xudc_done(ep0, req, 0);
+		break;
+	case DATA_PHASE:
+		bytes_to_rx = udc->read_fn(udc->addr +
+					   XUSB_EP_BUF0COUNT_OFFSET);
+		/* Copy the data to be received from the DPRAM. */
+		ep0rambase = (u8 __force *) (udc->addr +
+			     (ep0->rambase << 2));
+		buffer = req->usb_req.buf + req->usb_req.actual;
+		req->usb_req.actual = req->usb_req.actual + bytes_to_rx;
+		memcpy(buffer, ep0rambase, bytes_to_rx);
+
+		if (req->usb_req.length == req->usb_req.actual) {
+			/* Data transfer completed get ready for Status stage */
+			xudc_wrstatus(udc);
+		} else {
+			/* Enable EP0 buffer to receive data */
+			udc->write_fn(udc->addr, XUSB_EP_BUF0COUNT_OFFSET, 0);
+			udc->write_fn(udc->addr, XUSB_BUFFREADY_OFFSET, 1);
+		}
+		break;
+	default:
+		break;
+	}
+}
+
+/**
+ * xudc_ep0_in - Processes the endpoint 0 IN token.
+ * @udc: pointer to the usb device controller structure.
+ */
+static void xudc_ep0_in(struct xusb_udc *udc)
+{
+	struct xusb_ep *ep0 = &udc->ep[0];
+	struct xusb_req *req;
+	unsigned int bytes_to_tx;
+	void *buffer;
+	u32 epcfgreg;
+	u16 count = 0;
+	u16 length;
+	u8 *ep0rambase;
+	u8 test_mode = udc->setup.wIndex >> 8;
+
+	req = list_first_entry(&ep0->queue, struct xusb_req, queue);
+	bytes_to_tx = req->usb_req.length - req->usb_req.actual;
+
+	switch (udc->setupseqtx) {
+	case STATUS_PHASE:
+		switch (udc->setup.bRequest) {
+		case USB_REQ_SET_ADDRESS:
+			/* Set the address of the device.*/
+			udc->write_fn(udc->addr, XUSB_ADDRESS_OFFSET,
+				      udc->setup.wValue);
+			break;
+		case USB_REQ_SET_FEATURE:
+			if (udc->setup.bRequestType ==
+					USB_RECIP_DEVICE) {
+				if (udc->setup.wValue ==
+						USB_DEVICE_TEST_MODE)
+					udc->write_fn(udc->addr,
+						      XUSB_TESTMODE_OFFSET,
+						      test_mode);
+			}
+			break;
+		}
+		req->usb_req.actual = req->usb_req.length;
+		xudc_done(ep0, req, 0);
+		break;
+	case DATA_PHASE:
+		if (!bytes_to_tx) {
+			/*
+			 * We're done with data transfer, next
+			 * will be zero length OUT with data toggle of
+			 * 1. Setup data_toggle.
+			 */
+			epcfgreg = udc->read_fn(udc->addr + ep0->offset);
+			epcfgreg |= XUSB_EP_CFG_DATA_TOGGLE_MASK;
+			udc->write_fn(udc->addr, ep0->offset, epcfgreg);
+			udc->setupseqtx = STATUS_PHASE;
+		} else {
+			length = count = min_t(u32, bytes_to_tx,
+					       EP0_MAX_PACKET);
+			/* Copy the data to be transmitted into the DPRAM. */
+			ep0rambase = (u8 __force *) (udc->addr +
+				     (ep0->rambase << 2));
+			buffer = req->usb_req.buf + req->usb_req.actual;
+			req->usb_req.actual = req->usb_req.actual + length;
+			memcpy(ep0rambase, buffer, length);
+		}
+		udc->write_fn(udc->addr, XUSB_EP_BUF0COUNT_OFFSET, count);
+		udc->write_fn(udc->addr, XUSB_BUFFREADY_OFFSET, 1);
+		break;
+	default:
+		break;
+	}
+}
+
+/**
+ * xudc_ctrl_ep_handler - Endpoint 0 interrupt handler.
+ * @udc: pointer to the udc structure.
+ * @intrstatus:	It's the mask value for the interrupt sources on endpoint 0.
+ *
+ * Processes the commands received during enumeration phase.
+ */
+static void xudc_ctrl_ep_handler(struct xusb_udc *udc, u32 intrstatus)
+{
+
+	if (intrstatus & XUSB_STATUS_SETUP_PACKET_MASK) {
+		xudc_handle_setup(udc);
+	} else {
+		if (intrstatus & XUSB_STATUS_FIFO_BUFF_RDY_MASK)
+			xudc_ep0_out(udc);
+		else if (intrstatus & XUSB_STATUS_FIFO_BUFF_FREE_MASK)
+			xudc_ep0_in(udc);
+	}
+}
+
+/**
+ * xudc_nonctrl_ep_handler - Non control endpoint interrupt handler.
+ * @udc: pointer to the udc structure.
+ * @epnum: End point number for which the interrupt is to be processed
+ * @intrstatus:	mask value for interrupt sources of endpoints other
+ *		than endpoint 0.
+ *
+ * Processes the buffer completion interrupts.
+ */
+static void xudc_nonctrl_ep_handler(struct xusb_udc *udc, u8 epnum,
+				    u32 intrstatus)
+{
+
+	struct xusb_req *req;
+	struct xusb_ep *ep;
+
+	ep = &udc->ep[epnum];
+	/* Process the End point interrupts.*/
+	if (intrstatus & (XUSB_STATUS_EP0_BUFF1_COMP_MASK << epnum))
+		ep->buffer0ready = 0;
+	if (intrstatus & (XUSB_STATUS_EP0_BUFF2_COMP_MASK << epnum))
+		ep->buffer1ready = 0;
+
+	if (list_empty(&ep->queue))
+		return;
+
+	req = list_first_entry(&ep->queue, struct xusb_req, queue);
+
+	if (ep->is_in)
+		xudc_write_fifo(ep, req);
+	else
+		xudc_read_fifo(ep, req);
+}
+
+/**
+ * xudc_irq - The main interrupt handler.
+ * @irq: The interrupt number.
+ * @_udc: pointer to the usb device controller structure.
+ *
+ * Return: IRQ_HANDLED after the interrupt is handled.
+ */
+static irqreturn_t xudc_irq(int irq, void *_udc)
+{
+	struct xusb_udc *udc = _udc;
+	u32 intrstatus;
+	u32 ier;
+	u8 index;
+	u32 bufintr;
+	unsigned long flags;
+
+	spin_lock_irqsave(&udc->lock, flags);
+
+	/*
+	 * Event interrupts are level sensitive hence first disable
+	 * IER, read ISR and figure out active interrupts.
+	 */
+	ier = udc->read_fn(udc->addr + XUSB_IER_OFFSET);
+	ier &= ~XUSB_STATUS_INTR_EVENT_MASK;
+	udc->write_fn(udc->addr, XUSB_IER_OFFSET, ier);
+
+	/* Read the Interrupt Status Register.*/
+	intrstatus = udc->read_fn(udc->addr + XUSB_STATUS_OFFSET);
+
+	/* Call the handler for the event interrupt.*/
+	if (intrstatus & XUSB_STATUS_INTR_EVENT_MASK) {
+		/*
+		 * Check if there is any action to be done for :
+		 * - USB Reset received {XUSB_STATUS_RESET_MASK}
+		 * - USB Suspend received {XUSB_STATUS_SUSPEND_MASK}
+		 * - USB Resume received {XUSB_STATUS_RESUME_MASK}
+		 * - USB Disconnect received {XUSB_STATUS_DISCONNECT_MASK}
+		 */
+		xudc_startup_handler(udc, intrstatus);
+	}
+
+	/* Check the buffer completion interrupts */
+	if (intrstatus & XUSB_STATUS_INTR_BUFF_COMP_ALL_MASK) {
+		/* Enable Reset, Suspend, Resume and Disconnect  */
+		ier = udc->read_fn(udc->addr + XUSB_IER_OFFSET);
+		ier |= XUSB_STATUS_INTR_EVENT_MASK;
+		udc->write_fn(udc->addr, XUSB_IER_OFFSET, ier);
+
+		if (intrstatus & XUSB_STATUS_EP0_BUFF1_COMP_MASK)
+			xudc_ctrl_ep_handler(udc, intrstatus);
+
+		for (index = 1; index < 8; index++) {
+			bufintr = ((intrstatus &
+				  (XUSB_STATUS_EP1_BUFF1_COMP_MASK <<
+				  (index - 1))) || (intrstatus &
+				  (XUSB_STATUS_EP1_BUFF2_COMP_MASK <<
+				  (index - 1))));
+			if (bufintr) {
+				xudc_nonctrl_ep_handler(udc, index,
+							intrstatus);
+			}
+		}
+	}
+
+	spin_unlock_irqrestore(&udc->lock, flags);
+	return IRQ_HANDLED;
+}
+
+/**
+ * xudc_probe - The device probe function for driver initialization.
+ * @pdev: pointer to the platform device structure.
+ *
+ * Return: 0 for success and error value on failure
+ */
+static int xudc_probe(struct platform_device *pdev)
+{
+	struct device_node *np = pdev->dev.of_node;
+	struct resource *res;
+	struct xusb_udc *udc;
+	struct xusb_ep *ep0;
+	int irq;
+	int ret;
+	u32 ier;
+	u8 *buff;
+
+	udc = devm_kzalloc(&pdev->dev, sizeof(*udc), GFP_KERNEL);
+	if (!udc)
+		return -ENOMEM;
+
+	/* Create a dummy request for GET_STATUS, SET_ADDRESS */
+	udc->req = devm_kzalloc(&pdev->dev, sizeof(struct xusb_req),
+				GFP_KERNEL);
+	if (!udc->req)
+		return -ENOMEM;
+
+	buff = devm_kzalloc(&pdev->dev, STATUSBUFF_SIZE, GFP_KERNEL);
+	if (!buff)
+		return -ENOMEM;
+
+	udc->req->usb_req.buf = buff;
+
+	/* Map the registers */
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	udc->addr = devm_ioremap_resource(&pdev->dev, res);
+	if (!udc->addr)
+		return -ENOMEM;
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0) {
+		dev_err(&pdev->dev, "unable to get irq\n");
+		return irq;
+	}
+	ret = devm_request_irq(&pdev->dev, irq, xudc_irq, 0,
+			       dev_name(&pdev->dev), udc);
+	if (ret < 0) {
+		dev_dbg(&pdev->dev, "unable to request irq %d", irq);
+		goto fail;
+	}
+
+	udc->dma_enabled = of_property_read_bool(np, "xlnx,has-builtin-dma");
+
+	/* Setup gadget structure */
+	udc->gadget.ops = &xusb_udc_ops;
+	udc->gadget.max_speed = USB_SPEED_HIGH;
+	udc->gadget.speed = USB_SPEED_UNKNOWN;
+	udc->gadget.ep0 = &udc->ep[XUSB_EP_NUMBER_ZERO].ep_usb;
+	udc->gadget.name = driver_name;
+
+	spin_lock_init(&udc->lock);
+
+	/* Check for IP endianness */
+	udc->write_fn = xudc_write32_be;
+	udc->read_fn = xudc_read32_be;
+	udc->write_fn(udc->addr, XUSB_TESTMODE_OFFSET, TEST_J);
+	if ((udc->read_fn(udc->addr + XUSB_TESTMODE_OFFSET))
+			!= TEST_J) {
+		udc->write_fn = xudc_write32;
+		udc->read_fn = xudc_read32;
+	}
+	udc->write_fn(udc->addr, XUSB_TESTMODE_OFFSET, 0);
+
+	xudc_eps_init(udc);
+
+	ep0 = &udc->ep[0];
+
+	/* Set device address to 0.*/
+	udc->write_fn(udc->addr, XUSB_ADDRESS_OFFSET, 0);
+
+	ret = usb_add_gadget_udc(&pdev->dev, &udc->gadget);
+	if (ret)
+		goto fail;
+
+	udc->dev = &udc->gadget.dev;
+
+	/* Enable the interrupts.*/
+	ier = XUSB_STATUS_GLOBAL_INTR_MASK | XUSB_STATUS_INTR_EVENT_MASK |
+	      XUSB_STATUS_FIFO_BUFF_RDY_MASK | XUSB_STATUS_FIFO_BUFF_FREE_MASK |
+	      XUSB_STATUS_SETUP_PACKET_MASK |
+	      XUSB_STATUS_INTR_BUFF_COMP_ALL_MASK;
+
+	udc->write_fn(udc->addr, XUSB_IER_OFFSET, ier);
+
+	platform_set_drvdata(pdev, udc);
+
+	dev_vdbg(&pdev->dev, "%s at 0x%08X mapped to 0x%08X %s\n",
+		 driver_name, (u32)res->start, (u32 __force)udc->addr,
+		 udc->dma_enabled ? "with DMA" : "without DMA");
+
+	return 0;
+fail:
+	dev_err(&pdev->dev, "probe failed, %d\n", ret);
+	return ret;
+}
+
+/**
+ * xudc_remove - Releases the resources allocated during the initialization.
+ * @pdev: pointer to the platform device structure.
+ *
+ * Return: 0 always
+ */
+static int xudc_remove(struct platform_device *pdev)
+{
+	struct xusb_udc *udc = platform_get_drvdata(pdev);
+
+	usb_del_gadget_udc(&udc->gadget);
+
+	return 0;
+}
+
+/* Match table for of_platform binding */
+static const struct of_device_id usb_of_match[] = {
+	{ .compatible = "xlnx,usb2-device-4.00.a", },
+	{ /* end of list */ },
+};
+MODULE_DEVICE_TABLE(of, usb_of_match);
+
+static struct platform_driver xudc_driver = {
+	.driver = {
+		.name = driver_name,
+		.of_match_table = usb_of_match,
+	},
+	.probe = xudc_probe,
+	.remove = xudc_remove,
+};
+
+module_platform_driver(xudc_driver);
+
+MODULE_DESCRIPTION("Xilinx udc driver");
+MODULE_AUTHOR("Xilinx, Inc");
+MODULE_LICENSE("GPL");
diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index 56f4336ffa86..a8a30b1d4167 100644
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -26,6 +26,11 @@ config USB_XHCI_HCD
 
 if USB_XHCI_HCD
 
+config USB_XHCI_PCI
+       tristate
+       depends on PCI
+       default y
+
 config USB_XHCI_PLATFORM
 	tristate
 
@@ -174,6 +179,15 @@ config USB_EHCI_HCD_SPEAR
           Enables support for the on-chip EHCI controller on
           ST SPEAr chips.
 
+config USB_EHCI_HCD_STI
+	tristate "Support for ST STiHxxx on-chip EHCI USB controller"
+	depends on ARCH_STI && OF
+	select GENERIC_PHY
+	select USB_EHCI_HCD_PLATFORM
+	help
+	  Enable support for the on-chip EHCI controller found on
+	  STMicroelectronics consumer electronics SoC's.
+
 config USB_EHCI_HCD_AT91
         tristate  "Support for Atmel on-chip EHCI USB controller"
         depends on USB_EHCI_HCD && ARCH_AT91
@@ -402,6 +416,15 @@ config USB_OHCI_HCD_SPEAR
           Enables support for the on-chip OHCI controller on
           ST SPEAr chips.
 
+config USB_OHCI_HCD_STI
+	tristate "Support for ST STiHxxx on-chip OHCI USB controller"
+	depends on ARCH_STI && OF
+	select GENERIC_PHY
+	select USB_OHCI_HCD_PLATFORM
+	help
+	  Enable support for the on-chip OHCI controller found on
+	  STMicroelectronics consumer electronics SoC's.
+
 config USB_OHCI_HCD_S3C2410
         tristate "OHCI support for Samsung S3C24xx/S3C64xx SoC series"
         depends on USB_OHCI_HCD && (ARCH_S3C24XX || ARCH_S3C64XX)
@@ -709,7 +732,7 @@ config USB_WHCI_HCD
 
 config USB_HWA_HCD
 	tristate "Host Wire Adapter (HWA) driver"
-	depends on UWB
+	depends on USB && UWB
 	select USB_WUSB
 	select UWB_HWA
 	help
diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile
index 144c038ef70f..348c24321562 100644
--- a/drivers/usb/host/Makefile
+++ b/drivers/usb/host/Makefile
@@ -15,22 +15,22 @@ fhci-$(CONFIG_FHCI_DEBUG) += fhci-dbg.o
 xhci-hcd-y := xhci.o xhci-mem.o
 xhci-hcd-y += xhci-ring.o xhci-hub.o xhci-dbg.o
 xhci-hcd-y += xhci-trace.o
-xhci-hcd-$(CONFIG_PCI)	+= xhci-pci.o
 
-ifneq ($(CONFIG_USB_XHCI_PLATFORM), )
-	xhci-hcd-y		+= xhci-plat.o
+xhci-plat-hcd-y := xhci-plat.o
 ifneq ($(CONFIG_USB_XHCI_MVEBU), )
-	xhci-hcd-y		+= xhci-mvebu.o
+	xhci-plat-hcd-y		+= xhci-mvebu.o
 endif
 ifneq ($(CONFIG_USB_XHCI_RCAR), )
-	xhci-hcd-y		+= xhci-rcar.o
-endif
+	xhci-plat-hcd-y		+= xhci-rcar.o
 endif
 
 obj-$(CONFIG_USB_WHCI_HCD)	+= whci/
 
 obj-$(CONFIG_PCI)		+= pci-quirks.o
 
+obj-$(CONFIG_USB_XHCI_PCI)	+= xhci-pci.o
+obj-$(CONFIG_USB_XHCI_PLATFORM) += xhci-plat-hcd.o
+
 obj-$(CONFIG_USB_EHCI_HCD)	+= ehci-hcd.o
 obj-$(CONFIG_USB_EHCI_PCI)	+= ehci-pci.o
 obj-$(CONFIG_USB_EHCI_HCD_PLATFORM)	+= ehci-platform.o
@@ -38,6 +38,7 @@ obj-$(CONFIG_USB_EHCI_MXC)	+= ehci-mxc.o
 obj-$(CONFIG_USB_EHCI_HCD_OMAP)	+= ehci-omap.o
 obj-$(CONFIG_USB_EHCI_HCD_ORION)	+= ehci-orion.o
 obj-$(CONFIG_USB_EHCI_HCD_SPEAR)	+= ehci-spear.o
+obj-$(CONFIG_USB_EHCI_HCD_STI)	+= ehci-st.o
 obj-$(CONFIG_USB_EHCI_EXYNOS)	+= ehci-exynos.o
 obj-$(CONFIG_USB_EHCI_HCD_AT91) += ehci-atmel.o
 obj-$(CONFIG_USB_EHCI_MSM)	+= ehci-msm.o
@@ -55,6 +56,7 @@ obj-$(CONFIG_USB_OHCI_EXYNOS)	+= ohci-exynos.o
 obj-$(CONFIG_USB_OHCI_HCD_OMAP1)	+= ohci-omap.o
 obj-$(CONFIG_USB_OHCI_HCD_OMAP3)	+= ohci-omap3.o
 obj-$(CONFIG_USB_OHCI_HCD_SPEAR)	+= ohci-spear.o
+obj-$(CONFIG_USB_OHCI_HCD_STI)	+= ohci-st.o
 obj-$(CONFIG_USB_OHCI_HCD_AT91)	+= ohci-at91.o
 obj-$(CONFIG_USB_OHCI_HCD_S3C2410)	+= ohci-s3c2410.o
 obj-$(CONFIG_USB_OHCI_HCD_LPC32XX)	+= ohci-nxp.o
diff --git a/drivers/usb/host/ehci-exynos.c b/drivers/usb/host/ehci-exynos.c
index cda0a2f5c467..7189f2e32ac2 100644
--- a/drivers/usb/host/ehci-exynos.c
+++ b/drivers/usb/host/ehci-exynos.c
@@ -21,11 +21,8 @@
 #include <linux/of_gpio.h>
 #include <linux/phy/phy.h>
 #include <linux/platform_device.h>
-#include <linux/usb/phy.h>
-#include <linux/usb/samsung_usb_phy.h>
 #include <linux/usb.h>
 #include <linux/usb/hcd.h>
-#include <linux/usb/otg.h>
 
 #include "ehci.h"
 
@@ -47,9 +44,7 @@ static struct hc_driver __read_mostly exynos_ehci_hc_driver;
 
 struct exynos_ehci_hcd {
 	struct clk *clk;
-	struct usb_phy *phy;
-	struct usb_otg *otg;
-	struct phy *phy_g[PHY_NUMBER];
+	struct phy *phy[PHY_NUMBER];
 };
 
 #define to_exynos_ehci(hcd) (struct exynos_ehci_hcd *)(hcd_to_ehci(hcd)->priv)
@@ -60,20 +55,9 @@ static int exynos_ehci_get_phy(struct device *dev,
 	struct device_node *child;
 	struct phy *phy;
 	int phy_number;
-	int ret = 0;
-
-	exynos_ehci->phy = devm_usb_get_phy(dev, USB_PHY_TYPE_USB2);
-	if (IS_ERR(exynos_ehci->phy)) {
-		ret = PTR_ERR(exynos_ehci->phy);
-		if (ret != -ENXIO && ret != -ENODEV) {
-			dev_err(dev, "no usb2 phy configured\n");
-			return ret;
-		}
-		dev_dbg(dev, "Failed to get usb2 phy\n");
-	} else {
-		exynos_ehci->otg = exynos_ehci->phy->otg;
-	}
+	int ret;
 
+	/* Get PHYs for the controller */
 	for_each_available_child_of_node(dev->of_node, child) {
 		ret = of_property_read_u32(child, "reg", &phy_number);
 		if (ret) {
@@ -89,19 +73,21 @@ static int exynos_ehci_get_phy(struct device *dev,
 		}
 
 		phy = devm_of_phy_get(dev, child, NULL);
+		exynos_ehci->phy[phy_number] = phy;
 		of_node_put(child);
 		if (IS_ERR(phy)) {
 			ret = PTR_ERR(phy);
-			if (ret != -ENOSYS && ret != -ENODEV) {
-				dev_err(dev, "no usb2 phy configured\n");
+			if (ret == -EPROBE_DEFER) {
+				return ret;
+			} else if (ret != -ENOSYS && ret != -ENODEV) {
+				dev_err(dev,
+					"Error retrieving usb2 phy: %d\n", ret);
 				return ret;
 			}
-			dev_dbg(dev, "Failed to get usb2 phy\n");
 		}
-		exynos_ehci->phy_g[phy_number] = phy;
 	}
 
-	return ret;
+	return 0;
 }
 
 static int exynos_ehci_phy_enable(struct device *dev)
@@ -111,16 +97,13 @@ static int exynos_ehci_phy_enable(struct device *dev)
 	int i;
 	int ret = 0;
 
-	if (!IS_ERR(exynos_ehci->phy))
-		return usb_phy_init(exynos_ehci->phy);
-
 	for (i = 0; ret == 0 && i < PHY_NUMBER; i++)
-		if (!IS_ERR(exynos_ehci->phy_g[i]))
-			ret = phy_power_on(exynos_ehci->phy_g[i]);
+		if (!IS_ERR(exynos_ehci->phy[i]))
+			ret = phy_power_on(exynos_ehci->phy[i]);
 	if (ret)
 		for (i--; i >= 0; i--)
-			if (!IS_ERR(exynos_ehci->phy_g[i]))
-				phy_power_off(exynos_ehci->phy_g[i]);
+			if (!IS_ERR(exynos_ehci->phy[i]))
+				phy_power_off(exynos_ehci->phy[i]);
 
 	return ret;
 }
@@ -131,14 +114,9 @@ static void exynos_ehci_phy_disable(struct device *dev)
 	struct exynos_ehci_hcd *exynos_ehci = to_exynos_ehci(hcd);
 	int i;
 
-	if (!IS_ERR(exynos_ehci->phy)) {
-		usb_phy_shutdown(exynos_ehci->phy);
-		return;
-	}
-
 	for (i = 0; i < PHY_NUMBER; i++)
-		if (!IS_ERR(exynos_ehci->phy_g[i]))
-			phy_power_off(exynos_ehci->phy_g[i]);
+		if (!IS_ERR(exynos_ehci->phy[i]))
+			phy_power_off(exynos_ehci->phy[i]);
 }
 
 static void exynos_setup_vbus_gpio(struct device *dev)
@@ -231,9 +209,6 @@ skip_phy:
 		goto fail_io;
 	}
 
-	if (exynos_ehci->otg)
-		exynos_ehci->otg->set_host(exynos_ehci->otg, &hcd->self);
-
 	err = exynos_ehci_phy_enable(&pdev->dev);
 	if (err) {
 		dev_err(&pdev->dev, "Failed to enable USB phy\n");
@@ -273,9 +248,6 @@ static int exynos_ehci_remove(struct platform_device *pdev)
 
 	usb_remove_hcd(hcd);
 
-	if (exynos_ehci->otg)
-		exynos_ehci->otg->set_host(exynos_ehci->otg, &hcd->self);
-
 	exynos_ehci_phy_disable(&pdev->dev);
 
 	clk_disable_unprepare(exynos_ehci->clk);
@@ -298,9 +270,6 @@ static int exynos_ehci_suspend(struct device *dev)
 	if (rc)
 		return rc;
 
-	if (exynos_ehci->otg)
-		exynos_ehci->otg->set_host(exynos_ehci->otg, &hcd->self);
-
 	exynos_ehci_phy_disable(dev);
 
 	clk_disable_unprepare(exynos_ehci->clk);
@@ -316,9 +285,6 @@ static int exynos_ehci_resume(struct device *dev)
 
 	clk_prepare_enable(exynos_ehci->clk);
 
-	if (exynos_ehci->otg)
-		exynos_ehci->otg->set_host(exynos_ehci->otg, &hcd->self);
-
 	ret = exynos_ehci_phy_enable(dev);
 	if (ret) {
 		dev_err(dev, "Failed to enable USB phy\n");
diff --git a/drivers/usb/host/ehci-fsl.c b/drivers/usb/host/ehci-fsl.c
index cf2734b532a7..2d2ae8db439e 100644
--- a/drivers/usb/host/ehci-fsl.c
+++ b/drivers/usb/host/ehci-fsl.c
@@ -136,15 +136,15 @@ static int usb_hcd_fsl_probe(const struct hc_driver *driver,
 	if (pdata->operating_mode == FSL_USB2_DR_OTG) {
 		struct ehci_hcd *ehci = hcd_to_ehci(hcd);
 
-		hcd->phy = usb_get_phy(USB_PHY_TYPE_USB2);
+		hcd->usb_phy = usb_get_phy(USB_PHY_TYPE_USB2);
 		dev_dbg(&pdev->dev, "hcd=0x%p  ehci=0x%p, phy=0x%p\n",
-			hcd, ehci, hcd->phy);
+			hcd, ehci, hcd->usb_phy);
 
-		if (!IS_ERR_OR_NULL(hcd->phy)) {
-			retval = otg_set_host(hcd->phy->otg,
+		if (!IS_ERR_OR_NULL(hcd->usb_phy)) {
+			retval = otg_set_host(hcd->usb_phy->otg,
 					      &ehci_to_hcd(ehci)->self);
 			if (retval) {
-				usb_put_phy(hcd->phy);
+				usb_put_phy(hcd->usb_phy);
 				goto err2;
 			}
 		} else {
@@ -181,9 +181,9 @@ static void usb_hcd_fsl_remove(struct usb_hcd *hcd,
 {
 	struct fsl_usb2_platform_data *pdata = dev_get_platdata(&pdev->dev);
 
-	if (!IS_ERR_OR_NULL(hcd->phy)) {
-		otg_set_host(hcd->phy->otg, NULL);
-		usb_put_phy(hcd->phy);
+	if (!IS_ERR_OR_NULL(hcd->usb_phy)) {
+		otg_set_host(hcd->usb_phy->otg, NULL);
+		usb_put_phy(hcd->usb_phy);
 	}
 
 	usb_remove_hcd(hcd);
@@ -627,7 +627,7 @@ static int ehci_start_port_reset(struct usb_hcd *hcd, unsigned port)
 	if (!(status & PORT_CONNECT))
 		return -ENODEV;
 
-	/* khubd will finish the reset later */
+	/* hub_wq will finish the reset later */
 	if (ehci_is_TDI(ehci)) {
 		writel(PORT_RESET |
 		       (status & ~(PORT_CSC | PORT_PEC | PORT_OCC)),
diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c
index 488a30836c36..15feaf924b71 100644
--- a/drivers/usb/host/ehci-hcd.c
+++ b/drivers/usb/host/ehci-hcd.c
@@ -788,7 +788,7 @@ static irqreturn_t ehci_irq (struct usb_hcd *hcd)
 				continue;
 
 			/* start 20 msec resume signaling from this port,
-			 * and make khubd collect PORT_STAT_C_SUSPEND to
+			 * and make hub_wq collect PORT_STAT_C_SUSPEND to
 			 * stop that signaling.  Use 5 ms extra for safety,
 			 * like usb_port_resume() does.
 			 */
diff --git a/drivers/usb/host/ehci-hub.c b/drivers/usb/host/ehci-hub.c
index 6130b7574908..5728829cf6ef 100644
--- a/drivers/usb/host/ehci-hub.c
+++ b/drivers/usb/host/ehci-hub.c
@@ -656,7 +656,7 @@ ehci_hub_status_data (struct usb_hcd *hcd, char *buf)
 
 		/*
 		 * Return status information even for ports with OWNER set.
-		 * Otherwise khubd wouldn't see the disconnect event when a
+		 * Otherwise hub_wq wouldn't see the disconnect event when a
 		 * high-speed device is switched over to the companion
 		 * controller by the user.
 		 */
@@ -902,7 +902,7 @@ int ehci_hub_control(
 
 		/*
 		 * Even if OWNER is set, so the port is owned by the
-		 * companion controller, khubd needs to be able to clear
+		 * companion controller, hub_wq needs to be able to clear
 		 * the port-change status bits (especially
 		 * USB_PORT_STAT_C_CONNECTION).
 		 */
@@ -922,7 +922,7 @@ int ehci_hub_control(
 #ifdef CONFIG_USB_OTG
 			if ((hcd->self.otg_port == (wIndex + 1))
 			    && hcd->self.b_hnp_enable) {
-				otg_start_hnp(hcd->phy->otg);
+				otg_start_hnp(hcd->usb_phy->otg);
 				break;
 			}
 #endif
@@ -1000,7 +1000,7 @@ int ehci_hub_control(
 			 * However, not all EHCI implementations do this
 			 * automatically, even if they _do_ support per-port
 			 * power switching; they're allowed to just limit the
-			 * current.  khubd will turn the power back on.
+			 * current.  hub_wq will turn the power back on.
 			 */
 			if (((temp & PORT_OC) || (ehci->need_oc_pp_cycle))
 					&& HCS_PPC(ehci->hcs_params)) {
@@ -1085,7 +1085,7 @@ int ehci_hub_control(
 		}
 
 		/*
-		 * Even if OWNER is set, there's no harm letting khubd
+		 * Even if OWNER is set, there's no harm letting hub_wq
 		 * see the wPortStatus values (they should all be 0 except
 		 * for PORT_POWER anyway).
 		 */
diff --git a/drivers/usb/host/ehci-msm.c b/drivers/usb/host/ehci-msm.c
index 934b39d5e44a..9dc2118ae808 100644
--- a/drivers/usb/host/ehci-msm.c
+++ b/drivers/usb/host/ehci-msm.c
@@ -124,7 +124,7 @@ static int ehci_msm_probe(struct platform_device *pdev)
 		goto put_hcd;
 	}
 
-	hcd->phy = phy;
+	hcd->usb_phy = phy;
 	device_init_wakeup(&pdev->dev, 1);
 	/*
 	 * OTG device parent of HCD takes care of putting
@@ -151,7 +151,7 @@ static int ehci_msm_remove(struct platform_device *pdev)
 	pm_runtime_disable(&pdev->dev);
 	pm_runtime_set_suspended(&pdev->dev);
 
-	otg_set_host(hcd->phy->otg, NULL);
+	otg_set_host(hcd->usb_phy->otg, NULL);
 
 	/* FIXME: need to call usb_remove_hcd() here? */
 
diff --git a/drivers/usb/host/ehci-st.c b/drivers/usb/host/ehci-st.c
new file mode 100644
index 000000000000..7e4bd39cf757
--- /dev/null
+++ b/drivers/usb/host/ehci-st.c
@@ -0,0 +1,375 @@
+/*
+ * ST EHCI driver
+ *
+ * Copyright (C) 2014 STMicroelectronics – All Rights Reserved
+ *
+ * Author: Peter Griffin <peter.griffin@linaro.org>
+ *
+ * Derived from ehci-platform.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/clk.h>
+#include <linux/dma-mapping.h>
+#include <linux/err.h>
+#include <linux/kernel.h>
+#include <linux/hrtimer.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/phy/phy.h>
+#include <linux/platform_device.h>
+#include <linux/reset.h>
+#include <linux/usb.h>
+#include <linux/usb/hcd.h>
+#include <linux/usb/ehci_pdriver.h>
+
+#include "ehci.h"
+
+#define USB_MAX_CLKS 3
+
+struct st_ehci_platform_priv {
+	struct clk *clks[USB_MAX_CLKS];
+	struct clk *clk48;
+	struct reset_control *rst;
+	struct reset_control *pwr;
+	struct phy *phy;
+};
+
+#define DRIVER_DESC "EHCI STMicroelectronics driver"
+
+#define hcd_to_ehci_priv(h) \
+	((struct st_ehci_platform_priv *)hcd_to_ehci(h)->priv)
+
+static const char hcd_name[] = "ehci-st";
+
+#define EHCI_CAPS_SIZE 0x10
+#define AHB2STBUS_INSREG01 (EHCI_CAPS_SIZE + 0x84)
+
+static int st_ehci_platform_reset(struct usb_hcd *hcd)
+{
+	struct platform_device *pdev = to_platform_device(hcd->self.controller);
+	struct usb_ehci_pdata *pdata = dev_get_platdata(&pdev->dev);
+	struct ehci_hcd *ehci = hcd_to_ehci(hcd);
+	int retval;
+	u32 threshold;
+
+	/* Set EHCI packet buffer IN/OUT threshold to 128 bytes */
+	threshold = 128 | (128 << 16);
+	writel(threshold, hcd->regs + AHB2STBUS_INSREG01);
+
+	ehci->caps = hcd->regs + pdata->caps_offset;
+	retval = ehci_setup(hcd);
+	if (retval)
+		return retval;
+
+	return 0;
+}
+
+static int st_ehci_platform_power_on(struct platform_device *dev)
+{
+	struct usb_hcd *hcd = platform_get_drvdata(dev);
+	struct st_ehci_platform_priv *priv = hcd_to_ehci_priv(hcd);
+	int clk, ret;
+
+	ret = reset_control_deassert(priv->pwr);
+	if (ret)
+		return ret;
+
+	ret = reset_control_deassert(priv->rst);
+	if (ret)
+		goto err_assert_power;
+
+	/* some SoCs don't have a dedicated 48Mhz clock, but those that do
+	   need the rate to be explicitly set */
+	if (priv->clk48) {
+		ret = clk_set_rate(priv->clk48, 48000000);
+		if (ret)
+			goto err_assert_reset;
+	}
+
+	for (clk = 0; clk < USB_MAX_CLKS && priv->clks[clk]; clk++) {
+		ret = clk_prepare_enable(priv->clks[clk]);
+		if (ret)
+			goto err_disable_clks;
+	}
+
+	ret = phy_init(priv->phy);
+	if (ret)
+		goto err_disable_clks;
+
+	ret = phy_power_on(priv->phy);
+	if (ret)
+		goto err_exit_phy;
+
+	return 0;
+
+err_exit_phy:
+	phy_exit(priv->phy);
+err_disable_clks:
+	while (--clk >= 0)
+		clk_disable_unprepare(priv->clks[clk]);
+err_assert_reset:
+	reset_control_assert(priv->rst);
+err_assert_power:
+	reset_control_assert(priv->pwr);
+
+	return ret;
+}
+
+static void st_ehci_platform_power_off(struct platform_device *dev)
+{
+	struct usb_hcd *hcd = platform_get_drvdata(dev);
+	struct st_ehci_platform_priv *priv = hcd_to_ehci_priv(hcd);
+	int clk;
+
+	reset_control_assert(priv->pwr);
+
+	reset_control_assert(priv->rst);
+
+	phy_power_off(priv->phy);
+
+	phy_exit(priv->phy);
+
+	for (clk = USB_MAX_CLKS - 1; clk >= 0; clk--)
+		if (priv->clks[clk])
+			clk_disable_unprepare(priv->clks[clk]);
+
+}
+
+static struct hc_driver __read_mostly ehci_platform_hc_driver;
+
+static const struct ehci_driver_overrides platform_overrides __initconst = {
+	.reset =		st_ehci_platform_reset,
+	.extra_priv_size =	sizeof(struct st_ehci_platform_priv),
+};
+
+static struct usb_ehci_pdata ehci_platform_defaults = {
+	.power_on =		st_ehci_platform_power_on,
+	.power_suspend =	st_ehci_platform_power_off,
+	.power_off =		st_ehci_platform_power_off,
+};
+
+static int st_ehci_platform_probe(struct platform_device *dev)
+{
+	struct usb_hcd *hcd;
+	struct resource *res_mem;
+	struct usb_ehci_pdata *pdata = &ehci_platform_defaults;
+	struct st_ehci_platform_priv *priv;
+	struct ehci_hcd *ehci;
+	int err, irq, clk = 0;
+
+	if (usb_disabled())
+		return -ENODEV;
+
+	irq = platform_get_irq(dev, 0);
+	if (irq < 0) {
+		dev_err(&dev->dev, "no irq provided");
+		return irq;
+	}
+	res_mem = platform_get_resource(dev, IORESOURCE_MEM, 0);
+	if (!res_mem) {
+		dev_err(&dev->dev, "no memory resource provided");
+		return -ENXIO;
+	}
+
+	hcd = usb_create_hcd(&ehci_platform_hc_driver, &dev->dev,
+			     dev_name(&dev->dev));
+	if (!hcd)
+		return -ENOMEM;
+
+	platform_set_drvdata(dev, hcd);
+	dev->dev.platform_data = pdata;
+	priv = hcd_to_ehci_priv(hcd);
+	ehci = hcd_to_ehci(hcd);
+
+	priv->phy = devm_phy_get(&dev->dev, "usb");
+	if (IS_ERR(priv->phy)) {
+		err = PTR_ERR(priv->phy);
+		goto err_put_hcd;
+	}
+
+	for (clk = 0; clk < USB_MAX_CLKS; clk++) {
+		priv->clks[clk] = of_clk_get(dev->dev.of_node, clk);
+		if (IS_ERR(priv->clks[clk])) {
+			err = PTR_ERR(priv->clks[clk]);
+			if (err == -EPROBE_DEFER)
+				goto err_put_clks;
+			priv->clks[clk] = NULL;
+			break;
+		}
+	}
+
+	/* some SoCs don't have a dedicated 48Mhz clock, but those that
+	   do need the rate to be explicitly set */
+	priv->clk48 = devm_clk_get(&dev->dev, "clk48");
+	if (IS_ERR(priv->clk48)) {
+		dev_info(&dev->dev, "48MHz clk not found\n");
+		priv->clk48 = NULL;
+	}
+
+	priv->pwr = devm_reset_control_get_optional(&dev->dev, "power");
+	if (IS_ERR(priv->pwr)) {
+		err = PTR_ERR(priv->pwr);
+		if (err == -EPROBE_DEFER)
+			goto err_put_clks;
+		priv->pwr = NULL;
+	}
+
+	priv->rst = devm_reset_control_get_optional(&dev->dev, "softreset");
+	if (IS_ERR(priv->rst)) {
+		err = PTR_ERR(priv->rst);
+		if (err == -EPROBE_DEFER)
+			goto err_put_clks;
+		priv->rst = NULL;
+	}
+
+	if (pdata->power_on) {
+		err = pdata->power_on(dev);
+		if (err < 0)
+			goto err_put_clks;
+	}
+
+	hcd->rsrc_start = res_mem->start;
+	hcd->rsrc_len = resource_size(res_mem);
+
+	hcd->regs = devm_ioremap_resource(&dev->dev, res_mem);
+	if (IS_ERR(hcd->regs)) {
+		err = PTR_ERR(hcd->regs);
+		goto err_put_clks;
+	}
+
+	err = usb_add_hcd(hcd, irq, IRQF_SHARED);
+	if (err)
+		goto err_put_clks;
+
+	device_wakeup_enable(hcd->self.controller);
+	platform_set_drvdata(dev, hcd);
+
+	return err;
+
+err_put_clks:
+	while (--clk >= 0)
+		clk_put(priv->clks[clk]);
+err_put_hcd:
+	if (pdata == &ehci_platform_defaults)
+		dev->dev.platform_data = NULL;
+
+	usb_put_hcd(hcd);
+
+	return err;
+}
+
+static int st_ehci_platform_remove(struct platform_device *dev)
+{
+	struct usb_hcd *hcd = platform_get_drvdata(dev);
+	struct usb_ehci_pdata *pdata = dev_get_platdata(&dev->dev);
+	struct st_ehci_platform_priv *priv = hcd_to_ehci_priv(hcd);
+	int clk;
+
+	usb_remove_hcd(hcd);
+
+	if (pdata->power_off)
+		pdata->power_off(dev);
+
+	for (clk = 0; clk < USB_MAX_CLKS && priv->clks[clk]; clk++)
+		clk_put(priv->clks[clk]);
+
+	usb_put_hcd(hcd);
+
+	if (pdata == &ehci_platform_defaults)
+		dev->dev.platform_data = NULL;
+
+	return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+
+static int st_ehci_suspend(struct device *dev)
+{
+	struct usb_hcd *hcd = dev_get_drvdata(dev);
+	struct usb_ehci_pdata *pdata = dev_get_platdata(dev);
+	struct platform_device *pdev =
+		container_of(dev, struct platform_device, dev);
+	bool do_wakeup = device_may_wakeup(dev);
+	int ret;
+
+	ret = ehci_suspend(hcd, do_wakeup);
+	if (ret)
+		return ret;
+
+	if (pdata->power_suspend)
+		pdata->power_suspend(pdev);
+
+	pinctrl_pm_select_sleep_state(dev);
+
+	return ret;
+}
+
+static int st_ehci_resume(struct device *dev)
+{
+	struct usb_hcd *hcd = dev_get_drvdata(dev);
+	struct usb_ehci_pdata *pdata = dev_get_platdata(dev);
+	struct platform_device *pdev =
+		container_of(dev, struct platform_device, dev);
+	int err;
+
+	pinctrl_pm_select_default_state(dev);
+
+	if (pdata->power_on) {
+		err = pdata->power_on(pdev);
+		if (err < 0)
+			return err;
+	}
+
+	ehci_resume(hcd, false);
+	return 0;
+}
+
+static SIMPLE_DEV_PM_OPS(st_ehci_pm_ops, st_ehci_suspend, st_ehci_resume);
+
+#endif /* CONFIG_PM_SLEEP */
+
+static const struct of_device_id st_ehci_ids[] = {
+	{ .compatible = "st,st-ehci-300x", },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, st_ehci_ids);
+
+static struct platform_driver ehci_platform_driver = {
+	.probe		= st_ehci_platform_probe,
+	.remove		= st_ehci_platform_remove,
+	.shutdown	= usb_hcd_platform_shutdown,
+	.driver		= {
+		.name	= "st-ehci",
+#ifdef CONFIG_PM_SLEEP
+		.pm	= &st_ehci_pm_ops,
+#endif
+		.of_match_table = st_ehci_ids,
+	}
+};
+
+static int __init ehci_platform_init(void)
+{
+	if (usb_disabled())
+		return -ENODEV;
+
+	pr_info("%s: " DRIVER_DESC "\n", hcd_name);
+
+	ehci_init_driver(&ehci_platform_hc_driver, &platform_overrides);
+	return platform_driver_register(&ehci_platform_driver);
+}
+module_init(ehci_platform_init);
+
+static void __exit ehci_platform_cleanup(void)
+{
+	platform_driver_unregister(&ehci_platform_driver);
+}
+module_exit(ehci_platform_cleanup);
+
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_AUTHOR("Peter Griffin <peter.griffin@linaro.org>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/usb/host/ehci-tegra.c b/drivers/usb/host/ehci-tegra.c
index 7aafb05e7a40..aaa01971efe9 100644
--- a/drivers/usb/host/ehci-tegra.c
+++ b/drivers/usb/host/ehci-tegra.c
@@ -206,7 +206,7 @@ static int tegra_ehci_hub_control(
 		if (tegra->port_resuming && !(temp & PORT_SUSPEND)) {
 			/* Resume completed, re-enable disconnect detection */
 			tegra->port_resuming = 0;
-			tegra_usb_phy_postresume(hcd->phy);
+			tegra_usb_phy_postresume(hcd->usb_phy);
 		}
 	}
 
@@ -259,7 +259,7 @@ static int tegra_ehci_hub_control(
 			goto done;
 
 		/* Disable disconnect detection during port resume */
-		tegra_usb_phy_preresume(hcd->phy);
+		tegra_usb_phy_preresume(hcd->usb_phy);
 
 		ehci->reset_done[wIndex-1] = jiffies + msecs_to_jiffies(25);
 
@@ -454,7 +454,7 @@ static int tegra_ehci_probe(struct platform_device *pdev)
 		err = PTR_ERR(u_phy);
 		goto cleanup_clk_en;
 	}
-	hcd->phy = u_phy;
+	hcd->usb_phy = u_phy;
 
 	tegra->needs_double_reset = of_property_read_bool(pdev->dev.of_node,
 		"nvidia,needs-double-reset");
@@ -475,7 +475,7 @@ static int tegra_ehci_probe(struct platform_device *pdev)
 	ehci->caps = hcd->regs + 0x100;
 	ehci->has_hostpc = soc_config->has_hostpc;
 
-	err = usb_phy_init(hcd->phy);
+	err = usb_phy_init(hcd->usb_phy);
 	if (err) {
 		dev_err(&pdev->dev, "Failed to initialize phy\n");
 		goto cleanup_clk_en;
@@ -490,7 +490,7 @@ static int tegra_ehci_probe(struct platform_device *pdev)
 	}
 	u_phy->otg->host = hcd_to_bus(hcd);
 
-	err = usb_phy_set_suspend(hcd->phy, 0);
+	err = usb_phy_set_suspend(hcd->usb_phy, 0);
 	if (err) {
 		dev_err(&pdev->dev, "Failed to power on the phy\n");
 		goto cleanup_phy;
@@ -517,7 +517,7 @@ static int tegra_ehci_probe(struct platform_device *pdev)
 cleanup_otg_set_host:
 	otg_set_host(u_phy->otg, NULL);
 cleanup_phy:
-	usb_phy_shutdown(hcd->phy);
+	usb_phy_shutdown(hcd->usb_phy);
 cleanup_clk_en:
 	clk_disable_unprepare(tegra->clk);
 cleanup_hcd_create:
@@ -531,9 +531,9 @@ static int tegra_ehci_remove(struct platform_device *pdev)
 	struct tegra_ehci_hcd *tegra =
 		(struct tegra_ehci_hcd *)hcd_to_ehci(hcd)->priv;
 
-	otg_set_host(hcd->phy->otg, NULL);
+	otg_set_host(hcd->usb_phy->otg, NULL);
 
-	usb_phy_shutdown(hcd->phy);
+	usb_phy_shutdown(hcd->usb_phy);
 	usb_remove_hcd(hcd);
 
 	clk_disable_unprepare(tegra->clk);
diff --git a/drivers/usb/host/ehci-xilinx-of.c b/drivers/usb/host/ehci-xilinx-of.c
index fe57710753e8..a2328361dc80 100644
--- a/drivers/usb/host/ehci-xilinx-of.c
+++ b/drivers/usb/host/ehci-xilinx-of.c
@@ -31,6 +31,7 @@
 #include <linux/of.h>
 #include <linux/of_platform.h>
 #include <linux/of_address.h>
+#include <linux/of_irq.h>
 
 /**
  * ehci_xilinx_port_handed_over - hand the port out if failed to enable it
diff --git a/drivers/usb/host/fhci-hcd.c b/drivers/usb/host/fhci-hcd.c
index 1cf68eaf2ed8..a1a1ef521436 100644
--- a/drivers/usb/host/fhci-hcd.c
+++ b/drivers/usb/host/fhci-hcd.c
@@ -360,12 +360,12 @@ static int fhci_start(struct usb_hcd *hcd)
 	hcd->state = HC_STATE_RUNNING;
 
 	/*
-	 * From here on, khubd concurrently accesses the root
+	 * From here on, hub_wq concurrently accesses the root
 	 * hub; drivers will be talking to enumerated devices.
-	 * (On restart paths, khubd already knows about the root
+	 * (On restart paths, hub_wq already knows about the root
 	 * hub and could find work as soon as we wrote FLAG_CF.)
 	 *
-	 * Before this point the HC was idle/ready.  After, khubd
+	 * Before this point the HC was idle/ready.  After, hub_wq
 	 * and device drivers may start it running.
 	 */
 	fhci_usb_enable(fhci);
diff --git a/drivers/usb/host/fotg210-hcd.c b/drivers/usb/host/fotg210-hcd.c
index adcd2050dced..3de1278677d0 100644
--- a/drivers/usb/host/fotg210-hcd.c
+++ b/drivers/usb/host/fotg210-hcd.c
@@ -1483,7 +1483,7 @@ fotg210_hub_status_data(struct usb_hcd *hcd, char *buf)
 
 	/*
 	 * Return status information even for ports with OWNER set.
-	 * Otherwise khubd wouldn't see the disconnect event when a
+	 * Otherwise hub_wq wouldn't see the disconnect event when a
 	 * high-speed device is switched over to the companion
 	 * controller by the user.
 	 */
@@ -1572,7 +1572,7 @@ static int fotg210_hub_control(
 
 		/*
 		 * Even if OWNER is set, so the port is owned by the
-		 * companion controller, khubd needs to be able to clear
+		 * companion controller, hub_wq needs to be able to clear
 		 * the port-change status bits (especially
 		 * USB_PORT_STAT_C_CONNECTION).
 		 */
@@ -1723,7 +1723,7 @@ static int fotg210_hub_control(
 		}
 
 		/*
-		 * Even if OWNER is set, there's no harm letting khubd
+		 * Even if OWNER is set, there's no harm letting hub_wq
 		 * see the wPortStatus values (they should all be 0 except
 		 * for PORT_POWER anyway).
 		 */
@@ -5445,7 +5445,7 @@ static irqreturn_t fotg210_irq(struct usb_hcd *hcd)
 				fotg210->reset_done[0] == 0) {
 
 			/* start 20 msec resume signaling from this port,
-			 * and make khubd collect PORT_STAT_C_SUSPEND to
+			 * and make hub_wq collect PORT_STAT_C_SUSPEND to
 			 * stop that signaling.  Use 5 ms extra for safety,
 			 * like usb_port_resume() does.
 			 */
diff --git a/drivers/usb/host/fusbh200-hcd.c b/drivers/usb/host/fusbh200-hcd.c
index ba9499060f63..abe42f31559f 100644
--- a/drivers/usb/host/fusbh200-hcd.c
+++ b/drivers/usb/host/fusbh200-hcd.c
@@ -1441,7 +1441,7 @@ fusbh200_hub_status_data (struct usb_hcd *hcd, char *buf)
 
 	/*
 	 * Return status information even for ports with OWNER set.
-	 * Otherwise khubd wouldn't see the disconnect event when a
+	 * Otherwise hub_wq wouldn't see the disconnect event when a
 	 * high-speed device is switched over to the companion
 	 * controller by the user.
 	 */
@@ -1530,7 +1530,7 @@ static int fusbh200_hub_control (
 
 		/*
 		 * Even if OWNER is set, so the port is owned by the
-		 * companion controller, khubd needs to be able to clear
+		 * companion controller, hub_wq needs to be able to clear
 		 * the port-change status bits (especially
 		 * USB_PORT_STAT_C_CONNECTION).
 		 */
@@ -1678,7 +1678,7 @@ static int fusbh200_hub_control (
 		}
 
 		/*
-		 * Even if OWNER is set, there's no harm letting khubd
+		 * Even if OWNER is set, there's no harm letting hub_wq
 		 * see the wPortStatus values (they should all be 0 except
 		 * for PORT_POWER anyway).
 		 */
@@ -5355,7 +5355,7 @@ static irqreturn_t fusbh200_irq (struct usb_hcd *hcd)
 				fusbh200->reset_done[0] == 0) {
 
 			/* start 20 msec resume signaling from this port,
-			 * and make khubd collect PORT_STAT_C_SUSPEND to
+			 * and make hub_wq collect PORT_STAT_C_SUSPEND to
 			 * stop that signaling.  Use 5 ms extra for safety,
 			 * like usb_port_resume() does.
 			 */
diff --git a/drivers/usb/host/isp1362-hcd.c b/drivers/usb/host/isp1362-hcd.c
index 875bcfd3ec1a..4bb37982855e 100644
--- a/drivers/usb/host/isp1362-hcd.c
+++ b/drivers/usb/host/isp1362-hcd.c
@@ -2616,30 +2616,10 @@ static int isp1362_remove(struct platform_device *pdev)
 {
 	struct usb_hcd *hcd = platform_get_drvdata(pdev);
 	struct isp1362_hcd *isp1362_hcd = hcd_to_isp1362_hcd(hcd);
-	struct resource *res;
 
 	remove_debug_file(isp1362_hcd);
 	DBG(0, "%s: Removing HCD\n", __func__);
 	usb_remove_hcd(hcd);
-
-	DBG(0, "%s: Unmapping data_reg @ %p\n", __func__,
-	    isp1362_hcd->data_reg);
-	iounmap(isp1362_hcd->data_reg);
-
-	DBG(0, "%s: Unmapping addr_reg @ %p\n", __func__,
-	    isp1362_hcd->addr_reg);
-	iounmap(isp1362_hcd->addr_reg);
-
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
-	DBG(0, "%s: release mem_region: %08lx\n", __func__, (long unsigned int)res->start);
-	if (res)
-		release_mem_region(res->start, resource_size(res));
-
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	DBG(0, "%s: release mem_region: %08lx\n", __func__, (long unsigned int)res->start);
-	if (res)
-		release_mem_region(res->start, resource_size(res));
-
 	DBG(0, "%s: put_hcd\n", __func__);
 	usb_put_hcd(hcd);
 	DBG(0, "%s: Done\n", __func__);
@@ -2651,12 +2631,11 @@ static int isp1362_probe(struct platform_device *pdev)
 {
 	struct usb_hcd *hcd;
 	struct isp1362_hcd *isp1362_hcd;
-	struct resource *addr, *data;
+	struct resource *addr, *data, *irq_res;
 	void __iomem *addr_reg;
 	void __iomem *data_reg;
 	int irq;
 	int retval = 0;
-	struct resource *irq_res;
 	unsigned int irq_flags = 0;
 
 	if (usb_disabled())
@@ -2667,52 +2646,35 @@ static int isp1362_probe(struct platform_device *pdev)
 	 * specific platform_data.  we don't probe for IRQs, and do only
 	 * minimal sanity checking.
 	 */
-	if (pdev->num_resources < 3) {
-		retval = -ENODEV;
-		goto err1;
-	}
-
-	data = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	addr = platform_get_resource(pdev, IORESOURCE_MEM, 1);
-	irq_res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
-	if (!addr || !data || !irq_res) {
-		retval = -ENODEV;
-		goto err1;
-	}
-	irq = irq_res->start;
+	if (pdev->num_resources < 3)
+		return -ENODEV;
 
 	if (pdev->dev.dma_mask) {
 		DBG(1, "won't do DMA");
-		retval = -ENODEV;
-		goto err1;
+		return -ENODEV;
 	}
 
-	if (!request_mem_region(addr->start, resource_size(addr), hcd_name)) {
-		retval = -EBUSY;
-		goto err1;
-	}
-	addr_reg = ioremap(addr->start, resource_size(addr));
-	if (addr_reg == NULL) {
-		retval = -ENOMEM;
-		goto err2;
-	}
+	irq_res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+	if (!irq_res)
+		return -ENODEV;
 
-	if (!request_mem_region(data->start, resource_size(data), hcd_name)) {
-		retval = -EBUSY;
-		goto err3;
-	}
-	data_reg = ioremap(data->start, resource_size(data));
-	if (data_reg == NULL) {
-		retval = -ENOMEM;
-		goto err4;
-	}
+	irq = irq_res->start;
+
+	addr = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+	addr_reg = devm_ioremap_resource(&pdev->dev, addr);
+	if (IS_ERR(addr_reg))
+		return PTR_ERR(addr_reg);
+
+	data = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	data_reg = devm_ioremap_resource(&pdev->dev, data);
+	if (IS_ERR(data_reg))
+		return PTR_ERR(data_reg);
 
 	/* allocate and initialize hcd */
 	hcd = usb_create_hcd(&isp1362_hc_driver, &pdev->dev, dev_name(&pdev->dev));
-	if (!hcd) {
-		retval = -ENOMEM;
-		goto err5;
-	}
+	if (!hcd)
+		return -ENOMEM;
+
 	hcd->rsrc_start = data->start;
 	isp1362_hcd = hcd_to_isp1362_hcd(hcd);
 	isp1362_hcd->data_reg = data_reg;
@@ -2729,7 +2691,7 @@ static int isp1362_probe(struct platform_device *pdev)
 	if (!isp1362_hcd->board->delay) {
 		dev_err(hcd->self.controller, "No platform delay function given\n");
 		retval = -ENODEV;
-		goto err6;
+		goto err;
 	}
 #endif
 
@@ -2744,32 +2706,17 @@ static int isp1362_probe(struct platform_device *pdev)
 
 	retval = usb_add_hcd(hcd, irq, irq_flags | IRQF_SHARED);
 	if (retval != 0)
-		goto err6;
+		goto err;
 	device_wakeup_enable(hcd->self.controller);
 
-	pr_info("%s, irq %d\n", hcd->product_desc, irq);
+	dev_info(&pdev->dev, "%s, irq %d\n", hcd->product_desc, irq);
 
 	create_debug_file(isp1362_hcd);
 
 	return 0;
 
- err6:
-	DBG(0, "%s: Freeing dev %p\n", __func__, isp1362_hcd);
+ err:
 	usb_put_hcd(hcd);
- err5:
-	DBG(0, "%s: Unmapping data_reg @ %p\n", __func__, data_reg);
-	iounmap(data_reg);
- err4:
-	DBG(0, "%s: Releasing mem region %08lx\n", __func__, (long unsigned int)data->start);
-	release_mem_region(data->start, resource_size(data));
- err3:
-	DBG(0, "%s: Unmapping addr_reg @ %p\n", __func__, addr_reg);
-	iounmap(addr_reg);
- err2:
-	DBG(0, "%s: Releasing mem region %08lx\n", __func__, (long unsigned int)addr->start);
-	release_mem_region(addr->start, resource_size(addr));
- err1:
-	pr_err("%s: init error, %d\n", __func__, retval);
 
 	return retval;
 }
diff --git a/drivers/usb/host/isp1760-hcd.c b/drivers/usb/host/isp1760-hcd.c
index 51a0ae9cdd1d..e752c3098f38 100644
--- a/drivers/usb/host/isp1760-hcd.c
+++ b/drivers/usb/host/isp1760-hcd.c
@@ -1760,7 +1760,7 @@ static int isp1760_hub_status_data(struct usb_hcd *hcd, char *buf)
 
 	/*
 	 * Return status information even for ports with OWNER set.
-	 * Otherwise khubd wouldn't see the disconnect event when a
+	 * Otherwise hub_wq wouldn't see the disconnect event when a
 	 * high-speed device is switched over to the companion
 	 * controller by the user.
 	 */
@@ -1871,7 +1871,7 @@ static int isp1760_hub_control(struct usb_hcd *hcd, u16 typeReq,
 
 		/*
 		 * Even if OWNER is set, so the port is owned by the
-		 * companion controller, khubd needs to be able to clear
+		 * companion controller, hub_wq needs to be able to clear
 		 * the port-change status bits (especially
 		 * USB_PORT_STAT_C_CONNECTION).
 		 */
@@ -2000,7 +2000,7 @@ static int isp1760_hub_control(struct usb_hcd *hcd, u16 typeReq,
 					reg_read32(hcd->regs, HC_PORTSC1));
 		}
 		/*
-		 * Even if OWNER is set, there's no harm letting khubd
+		 * Even if OWNER is set, there's no harm letting hub_wq
 		 * see the wPortStatus values (they should all be 0 except
 		 * for PORT_POWER anyway).
 		 */
diff --git a/drivers/usb/host/ohci-exynos.c b/drivers/usb/host/ohci-exynos.c
index a72ab8fe8cd3..d28b6583ba02 100644
--- a/drivers/usb/host/ohci-exynos.c
+++ b/drivers/usb/host/ohci-exynos.c
@@ -19,11 +19,8 @@
 #include <linux/of.h>
 #include <linux/platform_device.h>
 #include <linux/phy/phy.h>
-#include <linux/usb/phy.h>
-#include <linux/usb/samsung_usb_phy.h>
 #include <linux/usb.h>
 #include <linux/usb/hcd.h>
-#include <linux/usb/otg.h>
 
 #include "ohci.h"
 
@@ -38,9 +35,7 @@ static struct hc_driver __read_mostly exynos_ohci_hc_driver;
 
 struct exynos_ohci_hcd {
 	struct clk *clk;
-	struct usb_phy *phy;
-	struct usb_otg *otg;
-	struct phy *phy_g[PHY_NUMBER];
+	struct phy *phy[PHY_NUMBER];
 };
 
 static int exynos_ohci_get_phy(struct device *dev,
@@ -49,30 +44,9 @@ static int exynos_ohci_get_phy(struct device *dev,
 	struct device_node *child;
 	struct phy *phy;
 	int phy_number;
-	int ret = 0;
-
-	exynos_ohci->phy = devm_usb_get_phy(dev, USB_PHY_TYPE_USB2);
-	if (IS_ERR(exynos_ohci->phy)) {
-		ret = PTR_ERR(exynos_ohci->phy);
-		if (ret != -ENXIO && ret != -ENODEV) {
-			dev_err(dev, "no usb2 phy configured\n");
-			return ret;
-		}
-		dev_dbg(dev, "Failed to get usb2 phy\n");
-	} else {
-		exynos_ohci->otg = exynos_ohci->phy->otg;
-	}
+	int ret;
 
-	/*
-	 * Getting generic phy:
-	 * We are keeping both types of phys as a part of transiting OHCI
-	 * to generic phy framework, so as to maintain backward compatibilty
-	 * with old DTB.
-	 * If there are existing devices using DTB files built from them,
-	 * to remove the support for old bindings in this driver,
-	 * we need to make sure that such devices have their DTBs
-	 * updated to ones built from new DTS.
-	 */
+	/* Get PHYs for the controller */
 	for_each_available_child_of_node(dev->of_node, child) {
 		ret = of_property_read_u32(child, "reg", &phy_number);
 		if (ret) {
@@ -88,19 +62,21 @@ static int exynos_ohci_get_phy(struct device *dev,
 		}
 
 		phy = devm_of_phy_get(dev, child, NULL);
+		exynos_ohci->phy[phy_number] = phy;
 		of_node_put(child);
 		if (IS_ERR(phy)) {
 			ret = PTR_ERR(phy);
-			if (ret != -ENOSYS && ret != -ENODEV) {
-				dev_err(dev, "no usb2 phy configured\n");
+			if (ret == -EPROBE_DEFER) {
+				return ret;
+			} else if (ret != -ENOSYS && ret != -ENODEV) {
+				dev_err(dev,
+					"Error retrieving usb2 phy: %d\n", ret);
 				return ret;
 			}
-			dev_dbg(dev, "Failed to get usb2 phy\n");
 		}
-		exynos_ohci->phy_g[phy_number] = phy;
 	}
 
-	return ret;
+	return 0;
 }
 
 static int exynos_ohci_phy_enable(struct device *dev)
@@ -110,16 +86,13 @@ static int exynos_ohci_phy_enable(struct device *dev)
 	int i;
 	int ret = 0;
 
-	if (!IS_ERR(exynos_ohci->phy))
-		return usb_phy_init(exynos_ohci->phy);
-
 	for (i = 0; ret == 0 && i < PHY_NUMBER; i++)
-		if (!IS_ERR(exynos_ohci->phy_g[i]))
-			ret = phy_power_on(exynos_ohci->phy_g[i]);
+		if (!IS_ERR(exynos_ohci->phy[i]))
+			ret = phy_power_on(exynos_ohci->phy[i]);
 	if (ret)
 		for (i--; i >= 0; i--)
-			if (!IS_ERR(exynos_ohci->phy_g[i]))
-				phy_power_off(exynos_ohci->phy_g[i]);
+			if (!IS_ERR(exynos_ohci->phy[i]))
+				phy_power_off(exynos_ohci->phy[i]);
 
 	return ret;
 }
@@ -130,14 +103,9 @@ static void exynos_ohci_phy_disable(struct device *dev)
 	struct exynos_ohci_hcd *exynos_ohci = to_exynos_ohci(hcd);
 	int i;
 
-	if (!IS_ERR(exynos_ohci->phy)) {
-		usb_phy_shutdown(exynos_ohci->phy);
-		return;
-	}
-
 	for (i = 0; i < PHY_NUMBER; i++)
-		if (!IS_ERR(exynos_ohci->phy_g[i]))
-			phy_power_off(exynos_ohci->phy_g[i]);
+		if (!IS_ERR(exynos_ohci->phy[i]))
+			phy_power_off(exynos_ohci->phy[i]);
 }
 
 static int exynos_ohci_probe(struct platform_device *pdev)
@@ -209,9 +177,6 @@ skip_phy:
 		goto fail_io;
 	}
 
-	if (exynos_ohci->otg)
-		exynos_ohci->otg->set_host(exynos_ohci->otg, &hcd->self);
-
 	platform_set_drvdata(pdev, hcd);
 
 	err = exynos_ohci_phy_enable(&pdev->dev);
@@ -244,9 +209,6 @@ static int exynos_ohci_remove(struct platform_device *pdev)
 
 	usb_remove_hcd(hcd);
 
-	if (exynos_ohci->otg)
-		exynos_ohci->otg->set_host(exynos_ohci->otg, &hcd->self);
-
 	exynos_ohci_phy_disable(&pdev->dev);
 
 	clk_disable_unprepare(exynos_ohci->clk);
@@ -275,9 +237,6 @@ static int exynos_ohci_suspend(struct device *dev)
 	if (rc)
 		return rc;
 
-	if (exynos_ohci->otg)
-		exynos_ohci->otg->set_host(exynos_ohci->otg, &hcd->self);
-
 	exynos_ohci_phy_disable(dev);
 
 	clk_disable_unprepare(exynos_ohci->clk);
@@ -293,9 +252,6 @@ static int exynos_ohci_resume(struct device *dev)
 
 	clk_prepare_enable(exynos_ohci->clk);
 
-	if (exynos_ohci->otg)
-		exynos_ohci->otg->set_host(exynos_ohci->otg, &hcd->self);
-
 	ret = exynos_ohci_phy_enable(dev);
 	if (ret) {
 		dev_err(dev, "Failed to enable USB phy\n");
diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c
index 46987735a2e3..d664edabf14e 100644
--- a/drivers/usb/host/ohci-hcd.c
+++ b/drivers/usb/host/ohci-hcd.c
@@ -632,7 +632,7 @@ retry:
 		return -EOVERFLOW;
 	}
 
-	/* use rhsc irqs after khubd is fully initialized */
+	/* use rhsc irqs after hub_wq is allocated */
 	set_bit(HCD_FLAG_POLL_RH, &hcd->flags);
 	hcd->uses_new_polling = 1;
 
@@ -909,8 +909,8 @@ static irqreturn_t ohci_irq (struct usb_hcd *hcd)
 		 * choices for RHSC.  Many followed the spec; RHSC triggers
 		 * on an edge, like setting and maybe clearing a port status
 		 * change bit.  With others it's level-triggered, active
-		 * until khubd clears all the port status change bits.  We'll
-		 * always disable it here and rely on polling until khubd
+		 * until hub_wq clears all the port status change bits.  We'll
+		 * always disable it here and rely on polling until hub_wq
 		 * re-enables it.
 		 */
 		ohci_writel(ohci, OHCI_INTR_RHSC, &regs->intrdisable);
diff --git a/drivers/usb/host/ohci-hub.c b/drivers/usb/host/ohci-hub.c
index 17d32b0ea565..0aa17c937115 100644
--- a/drivers/usb/host/ohci-hub.c
+++ b/drivers/usb/host/ohci-hub.c
@@ -585,7 +585,7 @@ static int ohci_start_port_reset (struct usb_hcd *hcd, unsigned port)
 	if (!(status & RH_PS_CCS))
 		return -ENODEV;
 
-	/* khubd will finish the reset later */
+	/* hub_wq will finish the reset later */
 	ohci_writel(ohci, RH_PS_PRS, &ohci->regs->roothub.portstatus [port]);
 	return 0;
 }
@@ -610,7 +610,7 @@ static int ohci_start_port_reset (struct usb_hcd *hcd, unsigned port)
 /* wrap-aware logic morphed from <linux/jiffies.h> */
 #define tick_before(t1,t2) ((s16)(((s16)(t1))-((s16)(t2))) < 0)
 
-/* called from some task, normally khubd */
+/* called from some task, normally hub_wq */
 static inline int root_port_reset (struct ohci_hcd *ohci, unsigned port)
 {
 	__hc32 __iomem *portstat = &ohci->regs->roothub.portstatus [port];
diff --git a/drivers/usb/host/ohci-omap.c b/drivers/usb/host/ohci-omap.c
index c923cafcaca7..0231606d47c2 100644
--- a/drivers/usb/host/ohci-omap.c
+++ b/drivers/usb/host/ohci-omap.c
@@ -180,10 +180,10 @@ static void start_hnp(struct ohci_hcd *ohci)
 	unsigned long	flags;
 	u32 l;
 
-	otg_start_hnp(hcd->phy->otg);
+	otg_start_hnp(hcd->usb_phy->otg);
 
 	local_irq_save(flags);
-	hcd->phy->state = OTG_STATE_A_SUSPEND;
+	hcd->usb_phy->state = OTG_STATE_A_SUSPEND;
 	writel (RH_PS_PSS, &ohci->regs->roothub.portstatus [port]);
 	l = omap_readl(OTG_CTRL);
 	l &= ~OTG_A_BUSREQ;
@@ -220,14 +220,14 @@ static int ohci_omap_reset(struct usb_hcd *hcd)
 
 #ifdef	CONFIG_USB_OTG
 	if (need_transceiver) {
-		hcd->phy = usb_get_phy(USB_PHY_TYPE_USB2);
-		if (!IS_ERR_OR_NULL(hcd->phy)) {
-			int	status = otg_set_host(hcd->phy->otg,
+		hcd->usb_phy = usb_get_phy(USB_PHY_TYPE_USB2);
+		if (!IS_ERR_OR_NULL(hcd->usb_phy)) {
+			int	status = otg_set_host(hcd->usb_phy->otg,
 						&ohci_to_hcd(ohci)->self);
 			dev_dbg(hcd->self.controller, "init %s phy, status %d\n",
-					hcd->phy->label, status);
+					hcd->usb_phy->label, status);
 			if (status) {
-				usb_put_phy(hcd->phy);
+				usb_put_phy(hcd->usb_phy);
 				return status;
 			}
 		} else {
@@ -283,7 +283,7 @@ static int ohci_omap_reset(struct usb_hcd *hcd)
 		ohci_to_hcd(ohci)->power_budget = 0;
 	}
 
-	/* FIXME khubd hub requests should manage power switching */
+	/* FIXME hub_wq hub requests should manage power switching */
 	omap_ohci_transceiver_power(1);
 
 	/* board init will have already handled HMC and mux setup.
@@ -399,9 +399,9 @@ usb_hcd_omap_remove (struct usb_hcd *hcd, struct platform_device *pdev)
 	dev_dbg(hcd->self.controller, "stopping USB Controller\n");
 	usb_remove_hcd(hcd);
 	omap_ohci_clock_power(0);
-	if (!IS_ERR_OR_NULL(hcd->phy)) {
-		(void) otg_set_host(hcd->phy->otg, 0);
-		usb_put_phy(hcd->phy);
+	if (!IS_ERR_OR_NULL(hcd->usb_phy)) {
+		(void) otg_set_host(hcd->usb_phy->otg, 0);
+		usb_put_phy(hcd->usb_phy);
 	}
 	if (machine_is_omap_osk())
 		gpio_free(9);
diff --git a/drivers/usb/host/ohci-st.c b/drivers/usb/host/ohci-st.c
new file mode 100644
index 000000000000..df9028e0d9b4
--- /dev/null
+++ b/drivers/usb/host/ohci-st.c
@@ -0,0 +1,349 @@
+/*
+ * ST OHCI driver
+ *
+ * Copyright (C) 2014 STMicroelectronics – All Rights Reserved
+ *
+ * Author: Peter Griffin <peter.griffin@linaro.org>
+ *
+ * Derived from ohci-platform.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/clk.h>
+#include <linux/dma-mapping.h>
+#include <linux/hrtimer.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/err.h>
+#include <linux/phy/phy.h>
+#include <linux/platform_device.h>
+#include <linux/reset.h>
+#include <linux/usb/ohci_pdriver.h>
+#include <linux/usb.h>
+#include <linux/usb/hcd.h>
+
+#include "ohci.h"
+
+#define USB_MAX_CLKS 3
+
+struct st_ohci_platform_priv {
+	struct clk *clks[USB_MAX_CLKS];
+	struct clk *clk48;
+	struct reset_control *rst;
+	struct reset_control *pwr;
+	struct phy *phy;
+};
+
+#define DRIVER_DESC "OHCI STMicroelectronics driver"
+
+#define hcd_to_ohci_priv(h) \
+	((struct st_ohci_platform_priv *)hcd_to_ohci(h)->priv)
+
+static const char hcd_name[] = "ohci-st";
+
+static int st_ohci_platform_power_on(struct platform_device *dev)
+{
+	struct usb_hcd *hcd = platform_get_drvdata(dev);
+	struct st_ohci_platform_priv *priv = hcd_to_ohci_priv(hcd);
+	int clk, ret;
+
+	ret = reset_control_deassert(priv->pwr);
+	if (ret)
+		return ret;
+
+	ret = reset_control_deassert(priv->rst);
+	if (ret)
+		goto err_assert_power;
+
+	/* some SoCs don't have a dedicated 48Mhz clock, but those that do
+	   need the rate to be explicitly set */
+	if (priv->clk48) {
+		ret = clk_set_rate(priv->clk48, 48000000);
+		if (ret)
+			goto err_assert_reset;
+	}
+
+	for (clk = 0; clk < USB_MAX_CLKS && priv->clks[clk]; clk++) {
+		ret = clk_prepare_enable(priv->clks[clk]);
+		if (ret)
+			goto err_disable_clks;
+	}
+
+	ret = phy_init(priv->phy);
+	if (ret)
+		goto err_disable_clks;
+
+	ret = phy_power_on(priv->phy);
+	if (ret)
+		goto err_exit_phy;
+
+	return 0;
+
+err_exit_phy:
+	phy_exit(priv->phy);
+err_disable_clks:
+	while (--clk >= 0)
+		clk_disable_unprepare(priv->clks[clk]);
+err_assert_reset:
+	reset_control_assert(priv->rst);
+err_assert_power:
+	reset_control_assert(priv->pwr);
+
+	return ret;
+}
+
+static void st_ohci_platform_power_off(struct platform_device *dev)
+{
+	struct usb_hcd *hcd = platform_get_drvdata(dev);
+	struct st_ohci_platform_priv *priv = hcd_to_ohci_priv(hcd);
+
+	int clk;
+
+	reset_control_assert(priv->pwr);
+
+	reset_control_assert(priv->rst);
+
+	phy_power_off(priv->phy);
+
+	phy_exit(priv->phy);
+
+	for (clk = USB_MAX_CLKS - 1; clk >= 0; clk--)
+		if (priv->clks[clk])
+			clk_disable_unprepare(priv->clks[clk]);
+}
+
+static struct hc_driver __read_mostly ohci_platform_hc_driver;
+
+static const struct ohci_driver_overrides platform_overrides __initconst = {
+	.product_desc =		"ST OHCI controller",
+	.extra_priv_size =	sizeof(struct st_ohci_platform_priv),
+};
+
+static struct usb_ohci_pdata ohci_platform_defaults = {
+	.power_on =		st_ohci_platform_power_on,
+	.power_suspend =	st_ohci_platform_power_off,
+	.power_off =		st_ohci_platform_power_off,
+};
+
+static int st_ohci_platform_probe(struct platform_device *dev)
+{
+	struct usb_hcd *hcd;
+	struct resource *res_mem;
+	struct usb_ohci_pdata *pdata = &ohci_platform_defaults;
+	struct st_ohci_platform_priv *priv;
+	struct ohci_hcd *ohci;
+	int err, irq, clk = 0;
+
+	if (usb_disabled())
+		return -ENODEV;
+
+	irq = platform_get_irq(dev, 0);
+	if (irq < 0) {
+		dev_err(&dev->dev, "no irq provided");
+		return irq;
+	}
+
+	res_mem = platform_get_resource(dev, IORESOURCE_MEM, 0);
+	if (!res_mem) {
+		dev_err(&dev->dev, "no memory resource provided");
+		return -ENXIO;
+	}
+
+	hcd = usb_create_hcd(&ohci_platform_hc_driver, &dev->dev,
+			dev_name(&dev->dev));
+	if (!hcd)
+		return -ENOMEM;
+
+	platform_set_drvdata(dev, hcd);
+	dev->dev.platform_data = pdata;
+	priv = hcd_to_ohci_priv(hcd);
+	ohci = hcd_to_ohci(hcd);
+
+	priv->phy = devm_phy_get(&dev->dev, "usb");
+	if (IS_ERR(priv->phy)) {
+		err = PTR_ERR(priv->phy);
+		goto err_put_hcd;
+	}
+
+	for (clk = 0; clk < USB_MAX_CLKS; clk++) {
+		priv->clks[clk] = of_clk_get(dev->dev.of_node, clk);
+		if (IS_ERR(priv->clks[clk])) {
+			err = PTR_ERR(priv->clks[clk]);
+			if (err == -EPROBE_DEFER)
+				goto err_put_clks;
+			priv->clks[clk] = NULL;
+			break;
+		}
+	}
+
+	/* some SoCs don't have a dedicated 48Mhz clock, but those that
+	   do need the rate to be explicitly set */
+	priv->clk48 = devm_clk_get(&dev->dev, "clk48");
+	if (IS_ERR(priv->clk48)) {
+		dev_info(&dev->dev, "48MHz clk not found\n");
+		priv->clk48 = NULL;
+	}
+
+	priv->pwr = devm_reset_control_get_optional(&dev->dev, "power");
+	if (IS_ERR(priv->pwr)) {
+		err = PTR_ERR(priv->pwr);
+		goto err_put_clks;
+	}
+
+	priv->rst = devm_reset_control_get_optional(&dev->dev, "softreset");
+	if (IS_ERR(priv->rst)) {
+		err = PTR_ERR(priv->rst);
+		goto err_put_clks;
+	}
+
+	if (pdata->power_on) {
+		err = pdata->power_on(dev);
+		if (err < 0)
+			goto err_power;
+	}
+
+	hcd->rsrc_start = res_mem->start;
+	hcd->rsrc_len = resource_size(res_mem);
+
+	hcd->regs = devm_ioremap_resource(&dev->dev, res_mem);
+	if (IS_ERR(hcd->regs)) {
+		err = PTR_ERR(hcd->regs);
+		goto err_power;
+	}
+	err = usb_add_hcd(hcd, irq, IRQF_SHARED);
+	if (err)
+		goto err_power;
+
+	device_wakeup_enable(hcd->self.controller);
+
+	platform_set_drvdata(dev, hcd);
+
+	return err;
+
+err_power:
+	if (pdata->power_off)
+		pdata->power_off(dev);
+
+err_put_clks:
+	while (--clk >= 0)
+		clk_put(priv->clks[clk]);
+err_put_hcd:
+	if (pdata == &ohci_platform_defaults)
+		dev->dev.platform_data = NULL;
+
+	usb_put_hcd(hcd);
+
+	return err;
+}
+
+static int st_ohci_platform_remove(struct platform_device *dev)
+{
+	struct usb_hcd *hcd = platform_get_drvdata(dev);
+	struct usb_ohci_pdata *pdata = dev_get_platdata(&dev->dev);
+	struct st_ohci_platform_priv *priv = hcd_to_ohci_priv(hcd);
+	int clk;
+
+	usb_remove_hcd(hcd);
+
+	if (pdata->power_off)
+		pdata->power_off(dev);
+
+
+	for (clk = 0; clk < USB_MAX_CLKS && priv->clks[clk]; clk++)
+		clk_put(priv->clks[clk]);
+
+	usb_put_hcd(hcd);
+
+	if (pdata == &ohci_platform_defaults)
+		dev->dev.platform_data = NULL;
+
+	return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+
+static int st_ohci_suspend(struct device *dev)
+{
+	struct usb_hcd *hcd = dev_get_drvdata(dev);
+	struct usb_ohci_pdata *pdata = dev->platform_data;
+	struct platform_device *pdev =
+		container_of(dev, struct platform_device, dev);
+	bool do_wakeup = device_may_wakeup(dev);
+	int ret;
+
+	ret = ohci_suspend(hcd, do_wakeup);
+	if (ret)
+		return ret;
+
+	if (pdata->power_suspend)
+		pdata->power_suspend(pdev);
+
+	return ret;
+}
+
+static int st_ohci_resume(struct device *dev)
+{
+	struct usb_hcd *hcd = dev_get_drvdata(dev);
+	struct usb_ohci_pdata *pdata = dev_get_platdata(dev);
+	struct platform_device *pdev =
+		container_of(dev, struct platform_device, dev);
+	int err;
+
+	if (pdata->power_on) {
+		err = pdata->power_on(pdev);
+		if (err < 0)
+			return err;
+	}
+
+	ohci_resume(hcd, false);
+	return 0;
+}
+
+static SIMPLE_DEV_PM_OPS(st_ohci_pm_ops, st_ohci_suspend, st_ohci_resume);
+
+#endif /* CONFIG_PM_SLEEP */
+
+static const struct of_device_id st_ohci_platform_ids[] = {
+	{ .compatible = "st,st-ohci-300x", },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, st_ohci_platform_ids);
+
+static struct platform_driver ohci_platform_driver = {
+	.probe		= st_ohci_platform_probe,
+	.remove		= st_ohci_platform_remove,
+	.shutdown	= usb_hcd_platform_shutdown,
+	.driver		= {
+		.name	= "st-ohci",
+#ifdef CONFIG_PM_SLEEP
+		.pm	= &st_ohci_pm_ops,
+#endif
+		.of_match_table = st_ohci_platform_ids,
+	}
+};
+
+static int __init ohci_platform_init(void)
+{
+	if (usb_disabled())
+		return -ENODEV;
+
+	pr_info("%s: " DRIVER_DESC "\n", hcd_name);
+
+	ohci_init_driver(&ohci_platform_hc_driver, &platform_overrides);
+	return platform_driver_register(&ohci_platform_driver);
+}
+module_init(ohci_platform_init);
+
+static void __exit ohci_platform_cleanup(void)
+{
+	platform_driver_unregister(&ohci_platform_driver);
+}
+module_exit(ohci_platform_cleanup);
+
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_AUTHOR("Peter Griffin <peter.griffin@linaro.org>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/usb/host/oxu210hp-hcd.c b/drivers/usb/host/oxu210hp-hcd.c
index da5fb0e3c363..4fe79a2d71a9 100644
--- a/drivers/usb/host/oxu210hp-hcd.c
+++ b/drivers/usb/host/oxu210hp-hcd.c
@@ -2046,7 +2046,7 @@ static void intr_deschedule(struct oxu_hcd *oxu, struct ehci_qh *qh)
 
 	/* simple/paranoid:  always delay, expecting the HC needs to read
 	 * qh->hw_next or finish a writeback after SPLIT/CSPLIT ... and
-	 * expect khubd to clean up after any CSPLITs we won't issue.
+	 * expect hub_wq to clean up after any CSPLITs we won't issue.
 	 * active high speed queues may need bigger delays...
 	 */
 	if (list_empty(&qh->qtd_list)
@@ -2501,7 +2501,7 @@ static irqreturn_t oxu210_hcd_irq(struct usb_hcd *hcd)
 				continue;
 
 			/* start 20 msec resume signaling from this port,
-			 * and make khubd collect PORT_STAT_C_SUSPEND to
+			 * and make hub_wq collect PORT_STAT_C_SUSPEND to
 			 * stop that signaling.
 			 */
 			oxu->reset_done[i] = jiffies + msecs_to_jiffies(20);
@@ -3119,7 +3119,7 @@ static int oxu_hub_status_data(struct usb_hcd *hcd, char *buf)
 
 		/*
 		 * Return status information even for ports with OWNER set.
-		 * Otherwise khubd wouldn't see the disconnect event when a
+		 * Otherwise hub_wq wouldn't see the disconnect event when a
 		 * high-speed device is switched over to the companion
 		 * controller by the user.
 		 */
@@ -3194,7 +3194,7 @@ static int oxu_hub_control(struct usb_hcd *hcd, u16 typeReq,
 
 		/*
 		 * Even if OWNER is set, so the port is owned by the
-		 * companion controller, khubd needs to be able to clear
+		 * companion controller, hub_wq needs to be able to clear
 		 * the port-change status bits (especially
 		 * USB_PORT_STAT_C_CONNECTION).
 		 */
@@ -3336,7 +3336,7 @@ static int oxu_hub_control(struct usb_hcd *hcd, u16 typeReq,
 		}
 
 		/*
-		 * Even if OWNER is set, there's no harm letting khubd
+		 * Even if OWNER is set, there's no harm letting hub_wq
 		 * see the wPortStatus values (they should all be 0 except
 		 * for PORT_POWER anyway).
 		 */
diff --git a/drivers/usb/host/sl811-hcd.c b/drivers/usb/host/sl811-hcd.c
index a517151867af..ad0c348e68e9 100644
--- a/drivers/usb/host/sl811-hcd.c
+++ b/drivers/usb/host/sl811-hcd.c
@@ -674,7 +674,7 @@ retry:
 			sl811->next_periodic = sl811->periodic[index];
 	}
 
-	/* khubd manages debouncing and wakeup */
+	/* hub_wq manages debouncing and wakeup */
 	if (irqstat & SL11H_INTMASK_INSRMV) {
 		sl811->stat_insrmv++;
 
@@ -714,7 +714,7 @@ retry:
 #endif
 
 		/* port status seems weird until after reset, so
-		 * force the reset and make khubd clean up later.
+		 * force the reset and make hub_wq clean up later.
 		 */
 		if (irqstat & SL11H_INTMASK_RD)
 			sl811->port1 &= ~USB_PORT_STAT_CONNECTION;
@@ -1079,7 +1079,7 @@ sl811h_hub_status_data(struct usb_hcd *hcd, char *buf)
 	if (!(sl811->port1 & (0xffff << 16)))
 		return 0;
 
-	/* tell khubd port 1 changed */
+	/* tell hub_wq port 1 changed */
 	*buf = (1 << 1);
 	return 1;
 }
@@ -1196,7 +1196,7 @@ sl811h_timer(unsigned long _sl811)
 		sl811_write(sl811, SL811_EP_A(SL11H_HOSTCTLREG),
 				SL11H_HCTLMASK_ARM);
 
-		/* khubd provides debounce delay */
+		/* hub_wq provides debounce delay */
 	} else {
 		sl811->ctrl1 = 0;
 	}
diff --git a/drivers/usb/host/xhci-dbg.c b/drivers/usb/host/xhci-dbg.c
index eb009a457fb5..bb89175ca6e5 100644
--- a/drivers/usb/host/xhci-dbg.c
+++ b/drivers/usb/host/xhci-dbg.c
@@ -594,3 +594,4 @@ void xhci_dbg_trace(struct xhci_hcd *xhci, void (*trace)(struct va_format *),
 	trace(&vaf);
 	va_end(args);
 }
+EXPORT_SYMBOL_GPL(xhci_dbg_trace);
diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c
index 69aece31143a..696160d48ae8 100644
--- a/drivers/usb/host/xhci-hub.c
+++ b/drivers/usb/host/xhci-hub.c
@@ -319,12 +319,19 @@ static int xhci_stop_device(struct xhci_hcd *xhci, int slot_id, int suspend)
  */
 void xhci_ring_device(struct xhci_hcd *xhci, int slot_id)
 {
-	int i;
+	int i, s;
+	struct xhci_virt_ep *ep;
+
+	for (i = 0; i < LAST_EP_INDEX + 1; i++) {
+		ep = &xhci->devs[slot_id]->eps[i];
 
-	for (i = 0; i < LAST_EP_INDEX + 1; i++)
-		if (xhci->devs[slot_id]->eps[i].ring &&
-		    xhci->devs[slot_id]->eps[i].ring->dequeue)
+		if (ep->ep_state & EP_HAS_STREAMS) {
+			for (s = 1; s < ep->stream_info->num_streams; s++)
+				xhci_ring_ep_doorbell(xhci, slot_id, i, s);
+		} else if (ep->ring && ep->ring->dequeue) {
 			xhci_ring_ep_doorbell(xhci, slot_id, i, 0);
+		}
+	}
 
 	return;
 }
@@ -892,7 +899,7 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
 			/*
 			 * Turn on ports, even if there isn't per-port switching.
 			 * HC will report connect events even before this is set.
-			 * However, khubd will ignore the roothub events until
+			 * However, hub_wq will ignore the roothub events until
 			 * the roothub is registered.
 			 */
 			writel(temp | PORT_POWER, port_array[wIndex]);
diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c
index 8936211b161d..5cb3d7a10017 100644
--- a/drivers/usb/host/xhci-mem.c
+++ b/drivers/usb/host/xhci-mem.c
@@ -1904,7 +1904,7 @@ static int xhci_test_trb_in_td(struct xhci_hcd *xhci,
 	start_dma = xhci_trb_virt_to_dma(input_seg, start_trb);
 	end_dma = xhci_trb_virt_to_dma(input_seg, end_trb);
 
-	seg = trb_in_td(input_seg, start_trb, end_trb, input_dma);
+	seg = trb_in_td(xhci, input_seg, start_trb, end_trb, input_dma, false);
 	if (seg != result_seg) {
 		xhci_warn(xhci, "WARN: %s TRB math test %d failed!\n",
 				test_name, test_number);
@@ -1918,6 +1918,8 @@ static int xhci_test_trb_in_td(struct xhci_hcd *xhci,
 				end_trb, end_dma);
 		xhci_warn(xhci, "Expected seg %p, got seg %p\n",
 				result_seg, seg);
+		trb_in_td(xhci, input_seg, start_trb, end_trb, input_dma,
+			  true);
 		return -1;
 	}
 	return 0;
diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c
index c22a3e15a16e..280dde93abe5 100644
--- a/drivers/usb/host/xhci-pci.c
+++ b/drivers/usb/host/xhci-pci.c
@@ -40,6 +40,8 @@
 
 static const char hcd_name[] = "xhci_hcd";
 
+static struct hc_driver __read_mostly xhci_pci_hc_driver;
+
 /* called after powerup, by probe or system-pm "wakeup" */
 static int xhci_pci_reinit(struct xhci_hcd *xhci, struct pci_dev *pdev)
 {
@@ -286,7 +288,7 @@ static int xhci_pci_suspend(struct usb_hcd *hcd, bool do_wakeup)
 	 * Systems with the TI redriver that loses port status change events
 	 * need to have the registers polled during D3, so avoid D3cold.
 	 */
-	if (xhci_compliance_mode_recovery_timer_quirk_check())
+	if (xhci->quirks & XHCI_COMP_MODE_QUIRK)
 		pdev->no_d3cold = true;
 
 	return xhci_suspend(xhci);
@@ -324,68 +326,6 @@ static int xhci_pci_resume(struct usb_hcd *hcd, bool hibernated)
 }
 #endif /* CONFIG_PM */
 
-static const struct hc_driver xhci_pci_hc_driver = {
-	.description =		hcd_name,
-	.product_desc =		"xHCI Host Controller",
-	.hcd_priv_size =	sizeof(struct xhci_hcd *),
-
-	/*
-	 * generic hardware linkage
-	 */
-	.irq =			xhci_irq,
-	.flags =		HCD_MEMORY | HCD_USB3 | HCD_SHARED,
-
-	/*
-	 * basic lifecycle operations
-	 */
-	.reset =		xhci_pci_setup,
-	.start =		xhci_run,
-#ifdef CONFIG_PM
-	.pci_suspend =          xhci_pci_suspend,
-	.pci_resume =           xhci_pci_resume,
-#endif
-	.stop =			xhci_stop,
-	.shutdown =		xhci_shutdown,
-
-	/*
-	 * managing i/o requests and associated device resources
-	 */
-	.urb_enqueue =		xhci_urb_enqueue,
-	.urb_dequeue =		xhci_urb_dequeue,
-	.alloc_dev =		xhci_alloc_dev,
-	.free_dev =		xhci_free_dev,
-	.alloc_streams =	xhci_alloc_streams,
-	.free_streams =		xhci_free_streams,
-	.add_endpoint =		xhci_add_endpoint,
-	.drop_endpoint =	xhci_drop_endpoint,
-	.endpoint_reset =	xhci_endpoint_reset,
-	.check_bandwidth =	xhci_check_bandwidth,
-	.reset_bandwidth =	xhci_reset_bandwidth,
-	.address_device =	xhci_address_device,
-	.enable_device =	xhci_enable_device,
-	.update_hub_device =	xhci_update_hub_device,
-	.reset_device =		xhci_discover_or_reset_device,
-
-	/*
-	 * scheduling support
-	 */
-	.get_frame_number =	xhci_get_frame,
-
-	/* Root hub support */
-	.hub_control =		xhci_hub_control,
-	.hub_status_data =	xhci_hub_status_data,
-	.bus_suspend =		xhci_bus_suspend,
-	.bus_resume =		xhci_bus_resume,
-	/*
-	 * call back when device connected and addressed
-	 */
-	.update_device =        xhci_update_device,
-	.set_usb2_hw_lpm =	xhci_set_usb2_hardware_lpm,
-	.enable_usb3_lpm_timeout =	xhci_enable_usb3_lpm_timeout,
-	.disable_usb3_lpm_timeout =	xhci_disable_usb3_lpm_timeout,
-	.find_raw_port_number =	xhci_find_raw_port_number,
-};
-
 /*-------------------------------------------------------------------------*/
 
 /* PCI driver selection metadata; PCI hotplugging uses this */
@@ -415,12 +355,22 @@ static struct pci_driver xhci_pci_driver = {
 #endif
 };
 
-int __init xhci_register_pci(void)
+static int __init xhci_pci_init(void)
 {
+	xhci_init_driver(&xhci_pci_hc_driver, xhci_pci_setup);
+#ifdef CONFIG_PM
+	xhci_pci_hc_driver.pci_suspend = xhci_pci_suspend;
+	xhci_pci_hc_driver.pci_resume = xhci_pci_resume;
+#endif
 	return pci_register_driver(&xhci_pci_driver);
 }
+module_init(xhci_pci_init);
 
-void xhci_unregister_pci(void)
+static void __exit xhci_pci_exit(void)
 {
 	pci_unregister_driver(&xhci_pci_driver);
 }
+module_exit(xhci_pci_exit);
+
+MODULE_DESCRIPTION("xHCI PCI Host Controller Driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/usb/host/xhci-plat.c b/drivers/usb/host/xhci-plat.c
index 1a0cf9f31e43..3d78b0cd674b 100644
--- a/drivers/usb/host/xhci-plat.c
+++ b/drivers/usb/host/xhci-plat.c
@@ -23,6 +23,8 @@
 #include "xhci-mvebu.h"
 #include "xhci-rcar.h"
 
+static struct hc_driver __read_mostly xhci_plat_hc_driver;
+
 static void xhci_plat_quirks(struct device *dev, struct xhci_hcd *xhci)
 {
 	/*
@@ -60,59 +62,6 @@ static int xhci_plat_start(struct usb_hcd *hcd)
 	return xhci_run(hcd);
 }
 
-static const struct hc_driver xhci_plat_xhci_driver = {
-	.description =		"xhci-hcd",
-	.product_desc =		"xHCI Host Controller",
-	.hcd_priv_size =	sizeof(struct xhci_hcd *),
-
-	/*
-	 * generic hardware linkage
-	 */
-	.irq =			xhci_irq,
-	.flags =		HCD_MEMORY | HCD_USB3 | HCD_SHARED,
-
-	/*
-	 * basic lifecycle operations
-	 */
-	.reset =		xhci_plat_setup,
-	.start =		xhci_plat_start,
-	.stop =			xhci_stop,
-	.shutdown =		xhci_shutdown,
-
-	/*
-	 * managing i/o requests and associated device resources
-	 */
-	.urb_enqueue =		xhci_urb_enqueue,
-	.urb_dequeue =		xhci_urb_dequeue,
-	.alloc_dev =		xhci_alloc_dev,
-	.free_dev =		xhci_free_dev,
-	.alloc_streams =	xhci_alloc_streams,
-	.free_streams =		xhci_free_streams,
-	.add_endpoint =		xhci_add_endpoint,
-	.drop_endpoint =	xhci_drop_endpoint,
-	.endpoint_reset =	xhci_endpoint_reset,
-	.check_bandwidth =	xhci_check_bandwidth,
-	.reset_bandwidth =	xhci_reset_bandwidth,
-	.address_device =	xhci_address_device,
-	.enable_device =	xhci_enable_device,
-	.update_hub_device =	xhci_update_hub_device,
-	.reset_device =		xhci_discover_or_reset_device,
-
-	/*
-	 * scheduling support
-	 */
-	.get_frame_number =	xhci_get_frame,
-
-	/* Root hub support */
-	.hub_control =		xhci_hub_control,
-	.hub_status_data =	xhci_hub_status_data,
-	.bus_suspend =		xhci_bus_suspend,
-	.bus_resume =		xhci_bus_resume,
-
-	.enable_usb3_lpm_timeout =	xhci_enable_usb3_lpm_timeout,
-	.disable_usb3_lpm_timeout =	xhci_disable_usb3_lpm_timeout,
-};
-
 static int xhci_plat_probe(struct platform_device *pdev)
 {
 	struct device_node	*node = pdev->dev.of_node;
@@ -128,7 +77,7 @@ static int xhci_plat_probe(struct platform_device *pdev)
 	if (usb_disabled())
 		return -ENODEV;
 
-	driver = &xhci_plat_xhci_driver;
+	driver = &xhci_plat_hc_driver;
 
 	irq = platform_get_irq(pdev, 0);
 	if (irq < 0)
@@ -298,12 +247,19 @@ static struct platform_driver usb_xhci_driver = {
 };
 MODULE_ALIAS("platform:xhci-hcd");
 
-int xhci_register_plat(void)
+static int __init xhci_plat_init(void)
 {
+	xhci_init_driver(&xhci_plat_hc_driver, xhci_plat_setup);
+	xhci_plat_hc_driver.start = xhci_plat_start;
 	return platform_driver_register(&usb_xhci_driver);
 }
+module_init(xhci_plat_init);
 
-void xhci_unregister_plat(void)
+static void __exit xhci_plat_exit(void)
 {
 	platform_driver_unregister(&usb_xhci_driver);
 }
+module_exit(xhci_plat_exit);
+
+MODULE_DESCRIPTION("xHCI Platform Host Controller Driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
index abed30b82905..bc6fcbc16f61 100644
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -327,7 +327,6 @@ void xhci_ring_ep_doorbell(struct xhci_hcd *xhci,
 	 * We don't want to restart any stream rings if there's a set dequeue
 	 * pointer command pending because the device can choose to start any
 	 * stream once the endpoint is on the HW schedule.
-	 * FIXME - check all the stream rings for pending cancellations.
 	 */
 	if ((ep_state & EP_HALT_PENDING) || (ep_state & SET_DEQ_PENDING) ||
 	    (ep_state & EP_HALTED))
@@ -572,40 +571,6 @@ static void td_to_noop(struct xhci_hcd *xhci, struct xhci_ring *ep_ring,
 	}
 }
 
-static int queue_set_tr_deq(struct xhci_hcd *xhci,
-		struct xhci_command *cmd, int slot_id,
-		unsigned int ep_index, unsigned int stream_id,
-		struct xhci_segment *deq_seg,
-		union xhci_trb *deq_ptr, u32 cycle_state);
-
-void xhci_queue_new_dequeue_state(struct xhci_hcd *xhci,
-		struct xhci_command *cmd,
-		unsigned int slot_id, unsigned int ep_index,
-		unsigned int stream_id,
-		struct xhci_dequeue_state *deq_state)
-{
-	struct xhci_virt_ep *ep = &xhci->devs[slot_id]->eps[ep_index];
-
-	xhci_dbg_trace(xhci, trace_xhci_dbg_cancel_urb,
-			"Set TR Deq Ptr cmd, new deq seg = %p (0x%llx dma), "
-			"new deq ptr = %p (0x%llx dma), new cycle = %u",
-			deq_state->new_deq_seg,
-			(unsigned long long)deq_state->new_deq_seg->dma,
-			deq_state->new_deq_ptr,
-			(unsigned long long)xhci_trb_virt_to_dma(deq_state->new_deq_seg, deq_state->new_deq_ptr),
-			deq_state->new_cycle_state);
-	queue_set_tr_deq(xhci, cmd, slot_id, ep_index, stream_id,
-			deq_state->new_deq_seg,
-			deq_state->new_deq_ptr,
-			(u32) deq_state->new_cycle_state);
-	/* Stop the TD queueing code from ringing the doorbell until
-	 * this command completes.  The HC won't set the dequeue pointer
-	 * if the ring is running, and ringing the doorbell starts the
-	 * ring running.
-	 */
-	ep->ep_state |= SET_DEQ_PENDING;
-}
-
 static void xhci_stop_watchdog_timer_in_irq(struct xhci_hcd *xhci,
 		struct xhci_virt_ep *ep)
 {
@@ -743,12 +708,8 @@ remove_finished_td:
 
 	/* If necessary, queue a Set Transfer Ring Dequeue Pointer command */
 	if (deq_state.new_deq_ptr && deq_state.new_deq_seg) {
-		struct xhci_command *command;
-		command = xhci_alloc_command(xhci, false, false, GFP_ATOMIC);
-		xhci_queue_new_dequeue_state(xhci, command,
-				slot_id, ep_index,
-				ep->stopped_td->urb->stream_id,
-				&deq_state);
+		xhci_queue_new_dequeue_state(xhci, slot_id, ep_index,
+				ep->stopped_td->urb->stream_id, &deq_state);
 		xhci_ring_cmd_db(xhci);
 	} else {
 		/* Otherwise ring the doorbell(s) to restart queued transfers */
@@ -1003,8 +964,7 @@ static void xhci_handle_cmd_set_deq(struct xhci_hcd *xhci, int slot_id,
 		xhci_warn(xhci, "WARN Set TR deq ptr command for freed stream ID %u\n",
 				stream_id);
 		/* XXX: Harmless??? */
-		dev->eps[ep_index].ep_state &= ~SET_DEQ_PENDING;
-		return;
+		goto cleanup;
 	}
 
 	ep_ctx = xhci_get_ep_ctx(xhci, dev->out_ctx, ep_index);
@@ -1069,6 +1029,7 @@ static void xhci_handle_cmd_set_deq(struct xhci_hcd *xhci, int slot_id,
 		}
 	}
 
+cleanup:
 	dev->eps[ep_index].ep_state &= ~SET_DEQ_PENDING;
 	dev->eps[ep_index].queued_deq_seg = NULL;
 	dev->eps[ep_index].queued_deq_ptr = NULL;
@@ -1699,10 +1660,12 @@ cleanup:
  * TRB in this TD, this function returns that TRB's segment.  Otherwise it
  * returns 0.
  */
-struct xhci_segment *trb_in_td(struct xhci_segment *start_seg,
+struct xhci_segment *trb_in_td(struct xhci_hcd *xhci,
+		struct xhci_segment *start_seg,
 		union xhci_trb	*start_trb,
 		union xhci_trb	*end_trb,
-		dma_addr_t	suspect_dma)
+		dma_addr_t	suspect_dma,
+		bool		debug)
 {
 	dma_addr_t start_dma;
 	dma_addr_t end_seg_dma;
@@ -1721,6 +1684,15 @@ struct xhci_segment *trb_in_td(struct xhci_segment *start_seg,
 		/* If the end TRB isn't in this segment, this is set to 0 */
 		end_trb_dma = xhci_trb_virt_to_dma(cur_seg, end_trb);
 
+		if (debug)
+			xhci_warn(xhci,
+				"Looking for event-dma %016llx trb-start %016llx trb-end %016llx seg-start %016llx seg-end %016llx\n",
+				(unsigned long long)suspect_dma,
+				(unsigned long long)start_dma,
+				(unsigned long long)end_trb_dma,
+				(unsigned long long)cur_seg->dma,
+				(unsigned long long)end_seg_dma);
+
 		if (end_trb_dma > 0) {
 			/* The end TRB is in this segment, so suspect should be here */
 			if (start_dma <= end_trb_dma) {
@@ -2453,8 +2425,8 @@ static int handle_tx_event(struct xhci_hcd *xhci,
 			td_num--;
 
 		/* Is this a TRB in the currently executing TD? */
-		event_seg = trb_in_td(ep_ring->deq_seg, ep_ring->dequeue,
-				td->last_trb, event_dma);
+		event_seg = trb_in_td(xhci, ep_ring->deq_seg, ep_ring->dequeue,
+				td->last_trb, event_dma, false);
 
 		/*
 		 * Skip the Force Stopped Event. The event_trb(event_dma) of FSE
@@ -2486,7 +2458,12 @@ static int handle_tx_event(struct xhci_hcd *xhci,
 				/* HC is busted, give up! */
 				xhci_err(xhci,
 					"ERROR Transfer event TRB DMA ptr not "
-					"part of current TD\n");
+					"part of current TD ep_index %d "
+					"comp_code %u\n", ep_index,
+					trb_comp_code);
+				trb_in_td(xhci, ep_ring->deq_seg,
+					  ep_ring->dequeue, td->last_trb,
+					  event_dma, true);
 				return -ESHUTDOWN;
 			}
 
@@ -3926,14 +3903,11 @@ int xhci_queue_stop_endpoint(struct xhci_hcd *xhci, struct xhci_command *cmd,
 			trb_slot_id | trb_ep_index | type | trb_suspend, false);
 }
 
-/* Set Transfer Ring Dequeue Pointer command.
- * This should not be used for endpoints that have streams enabled.
- */
-static int queue_set_tr_deq(struct xhci_hcd *xhci, struct xhci_command *cmd,
-			int slot_id,
-			unsigned int ep_index, unsigned int stream_id,
-			struct xhci_segment *deq_seg,
-			union xhci_trb *deq_ptr, u32 cycle_state)
+/* Set Transfer Ring Dequeue Pointer command */
+void xhci_queue_new_dequeue_state(struct xhci_hcd *xhci,
+		unsigned int slot_id, unsigned int ep_index,
+		unsigned int stream_id,
+		struct xhci_dequeue_state *deq_state)
 {
 	dma_addr_t addr;
 	u32 trb_slot_id = SLOT_ID_FOR_TRB(slot_id);
@@ -3942,28 +3916,59 @@ static int queue_set_tr_deq(struct xhci_hcd *xhci, struct xhci_command *cmd,
 	u32 trb_sct = 0;
 	u32 type = TRB_TYPE(TRB_SET_DEQ);
 	struct xhci_virt_ep *ep;
+	struct xhci_command *cmd;
+	int ret;
 
-	addr = xhci_trb_virt_to_dma(deq_seg, deq_ptr);
+	xhci_dbg_trace(xhci, trace_xhci_dbg_cancel_urb,
+		"Set TR Deq Ptr cmd, new deq seg = %p (0x%llx dma), new deq ptr = %p (0x%llx dma), new cycle = %u",
+		deq_state->new_deq_seg,
+		(unsigned long long)deq_state->new_deq_seg->dma,
+		deq_state->new_deq_ptr,
+		(unsigned long long)xhci_trb_virt_to_dma(
+			deq_state->new_deq_seg, deq_state->new_deq_ptr),
+		deq_state->new_cycle_state);
+
+	addr = xhci_trb_virt_to_dma(deq_state->new_deq_seg,
+				    deq_state->new_deq_ptr);
 	if (addr == 0) {
 		xhci_warn(xhci, "WARN Cannot submit Set TR Deq Ptr\n");
 		xhci_warn(xhci, "WARN deq seg = %p, deq pt = %p\n",
-				deq_seg, deq_ptr);
-		return 0;
+			  deq_state->new_deq_seg, deq_state->new_deq_ptr);
+		return;
 	}
 	ep = &xhci->devs[slot_id]->eps[ep_index];
 	if ((ep->ep_state & SET_DEQ_PENDING)) {
 		xhci_warn(xhci, "WARN Cannot submit Set TR Deq Ptr\n");
 		xhci_warn(xhci, "A Set TR Deq Ptr command is pending.\n");
-		return 0;
+		return;
+	}
+
+	/* This function gets called from contexts where it cannot sleep */
+	cmd = xhci_alloc_command(xhci, false, false, GFP_ATOMIC);
+	if (!cmd) {
+		xhci_warn(xhci, "WARN Cannot submit Set TR Deq Ptr: ENOMEM\n");
+		return;
 	}
-	ep->queued_deq_seg = deq_seg;
-	ep->queued_deq_ptr = deq_ptr;
+
+	ep->queued_deq_seg = deq_state->new_deq_seg;
+	ep->queued_deq_ptr = deq_state->new_deq_ptr;
 	if (stream_id)
 		trb_sct = SCT_FOR_TRB(SCT_PRI_TR);
-	return queue_command(xhci, cmd,
-			lower_32_bits(addr) | trb_sct | cycle_state,
-			upper_32_bits(addr), trb_stream_id,
-			trb_slot_id | trb_ep_index | type, false);
+	ret = queue_command(xhci, cmd,
+		lower_32_bits(addr) | trb_sct | deq_state->new_cycle_state,
+		upper_32_bits(addr), trb_stream_id,
+		trb_slot_id | trb_ep_index | type, false);
+	if (ret < 0) {
+		xhci_free_command(xhci, cmd);
+		return;
+	}
+
+	/* Stop the TD queueing code from ringing the doorbell until
+	 * this command completes.  The HC won't set the dequeue pointer
+	 * if the ring is running, and ringing the doorbell starts the
+	 * ring running.
+	 */
+	ep->ep_state |= SET_DEQ_PENDING;
 }
 
 int xhci_queue_reset_ep(struct xhci_hcd *xhci, struct xhci_command *cmd,
diff --git a/drivers/usb/host/xhci-trace.c b/drivers/usb/host/xhci-trace.c
index 7cf30c83dcf3..367b630bdb3c 100644
--- a/drivers/usb/host/xhci-trace.c
+++ b/drivers/usb/host/xhci-trace.c
@@ -13,3 +13,5 @@
 
 #define CREATE_TRACE_POINTS
 #include "xhci-trace.h"
+
+EXPORT_TRACEPOINT_SYMBOL_GPL(xhci_dbg_quirks);
diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index c4a8fca8ae93..2a5d45b4cb15 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -491,7 +491,7 @@ static void compliance_mode_recovery_timer_init(struct xhci_hcd *xhci)
  * Systems:
  * Vendor: Hewlett-Packard -> System Models: Z420, Z620 and Z820
  */
-bool xhci_compliance_mode_recovery_timer_quirk_check(void)
+static bool xhci_compliance_mode_recovery_timer_quirk_check(void)
 {
 	const char *dmi_product_name, *dmi_sys_vendor;
 
@@ -653,6 +653,7 @@ int xhci_run(struct usb_hcd *hcd)
 			"Finished xhci_run for USB2 roothub");
 	return 0;
 }
+EXPORT_SYMBOL_GPL(xhci_run);
 
 static void xhci_only_stop_hcd(struct usb_hcd *hcd)
 {
@@ -871,6 +872,8 @@ int xhci_suspend(struct xhci_hcd *xhci)
 	xhci_dbg(xhci, "%s: stopping port polling.\n", __func__);
 	clear_bit(HCD_FLAG_POLL_RH, &hcd->flags);
 	del_timer_sync(&hcd->rh_timer);
+	clear_bit(HCD_FLAG_POLL_RH, &xhci->shared_hcd->flags);
+	del_timer_sync(&xhci->shared_hcd->rh_timer);
 
 	spin_lock_irq(&xhci->lock);
 	clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
@@ -927,6 +930,7 @@ int xhci_suspend(struct xhci_hcd *xhci)
 
 	return rc;
 }
+EXPORT_SYMBOL_GPL(xhci_suspend);
 
 /*
  * start xHC (not bus-specific)
@@ -1075,9 +1079,12 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated)
 	xhci_dbg(xhci, "%s: starting port polling.\n", __func__);
 	set_bit(HCD_FLAG_POLL_RH, &hcd->flags);
 	usb_hcd_poll_rh_status(hcd);
+	set_bit(HCD_FLAG_POLL_RH, &xhci->shared_hcd->flags);
+	usb_hcd_poll_rh_status(xhci->shared_hcd);
 
 	return retval;
 }
+EXPORT_SYMBOL_GPL(xhci_resume);
 #endif	/* CONFIG_PM */
 
 /*-------------------------------------------------------------------------*/
@@ -2887,14 +2894,9 @@ void xhci_cleanup_stalled_ring(struct xhci_hcd *xhci,
 	 * issue a configure endpoint command later.
 	 */
 	if (!(xhci->quirks & XHCI_RESET_EP_QUIRK)) {
-		struct xhci_command *command;
-		/* Can't sleep if we're called from cleanup_halted_endpoint() */
-		command = xhci_alloc_command(xhci, false, false, GFP_ATOMIC);
-		if (!command)
-			return;
 		xhci_dbg_trace(xhci, trace_xhci_dbg_reset_ep,
 				"Queueing new dequeue state");
-		xhci_queue_new_dequeue_state(xhci, command, udev->slot_id,
+		xhci_queue_new_dequeue_state(xhci, udev->slot_id,
 				ep_index, ep->stopped_stream, &deq_state);
 	} else {
 		/* Better hope no one uses the input context between now and the
@@ -3761,8 +3763,8 @@ disable_slot:
 /*
  * Issue an Address Device command and optionally send a corresponding
  * SetAddress request to the device.
- * We should be protected by the usb_address0_mutex in khubd's hub_port_init, so
- * we should only issue and wait on one address command at the same time.
+ * We should be protected by the usb_address0_mutex in hub_wq's hub_port_init,
+ * so we should only issue and wait on one address command at the same time.
  */
 static int xhci_setup_device(struct usb_hcd *hcd, struct usb_device *udev,
 			     enum xhci_setup_dev setup)
@@ -4903,6 +4905,76 @@ error:
 	kfree(xhci);
 	return retval;
 }
+EXPORT_SYMBOL_GPL(xhci_gen_setup);
+
+static const struct hc_driver xhci_hc_driver = {
+	.description =		"xhci-hcd",
+	.product_desc =		"xHCI Host Controller",
+	.hcd_priv_size =	sizeof(struct xhci_hcd *),
+
+	/*
+	 * generic hardware linkage
+	 */
+	.irq =			xhci_irq,
+	.flags =		HCD_MEMORY | HCD_USB3 | HCD_SHARED,
+
+	/*
+	 * basic lifecycle operations
+	 */
+	.reset =		NULL, /* set in xhci_init_driver() */
+	.start =		xhci_run,
+	.stop =			xhci_stop,
+	.shutdown =		xhci_shutdown,
+
+	/*
+	 * managing i/o requests and associated device resources
+	 */
+	.urb_enqueue =		xhci_urb_enqueue,
+	.urb_dequeue =		xhci_urb_dequeue,
+	.alloc_dev =		xhci_alloc_dev,
+	.free_dev =		xhci_free_dev,
+	.alloc_streams =	xhci_alloc_streams,
+	.free_streams =		xhci_free_streams,
+	.add_endpoint =		xhci_add_endpoint,
+	.drop_endpoint =	xhci_drop_endpoint,
+	.endpoint_reset =	xhci_endpoint_reset,
+	.check_bandwidth =	xhci_check_bandwidth,
+	.reset_bandwidth =	xhci_reset_bandwidth,
+	.address_device =	xhci_address_device,
+	.enable_device =	xhci_enable_device,
+	.update_hub_device =	xhci_update_hub_device,
+	.reset_device =		xhci_discover_or_reset_device,
+
+	/*
+	 * scheduling support
+	 */
+	.get_frame_number =	xhci_get_frame,
+
+	/*
+	 * root hub support
+	 */
+	.hub_control =		xhci_hub_control,
+	.hub_status_data =	xhci_hub_status_data,
+	.bus_suspend =		xhci_bus_suspend,
+	.bus_resume =		xhci_bus_resume,
+
+	/*
+	 * call back when device connected and addressed
+	 */
+	.update_device =        xhci_update_device,
+	.set_usb2_hw_lpm =	xhci_set_usb2_hardware_lpm,
+	.enable_usb3_lpm_timeout =	xhci_enable_usb3_lpm_timeout,
+	.disable_usb3_lpm_timeout =	xhci_disable_usb3_lpm_timeout,
+	.find_raw_port_number =	xhci_find_raw_port_number,
+};
+
+void xhci_init_driver(struct hc_driver *drv, int (*setup_fn)(struct usb_hcd *))
+{
+	BUG_ON(!setup_fn);
+	*drv = xhci_hc_driver;
+	drv->reset = setup_fn;
+}
+EXPORT_SYMBOL_GPL(xhci_init_driver);
 
 MODULE_DESCRIPTION(DRIVER_DESC);
 MODULE_AUTHOR(DRIVER_AUTHOR);
@@ -4910,18 +4982,6 @@ MODULE_LICENSE("GPL");
 
 static int __init xhci_hcd_init(void)
 {
-	int retval;
-
-	retval = xhci_register_pci();
-	if (retval < 0) {
-		pr_debug("Problem registering PCI driver.\n");
-		return retval;
-	}
-	retval = xhci_register_plat();
-	if (retval < 0) {
-		pr_debug("Problem registering platform driver.\n");
-		goto unreg_pci;
-	}
 	/*
 	 * Check the compiler generated sizes of structures that must be laid
 	 * out in specific ways for hardware access.
@@ -4940,15 +5000,5 @@ static int __init xhci_hcd_init(void)
 	/* xhci_run_regs has eight fields and embeds 128 xhci_intr_regs */
 	BUILD_BUG_ON(sizeof(struct xhci_run_regs) != (8+8*128)*32/8);
 	return 0;
-unreg_pci:
-	xhci_unregister_pci();
-	return retval;
 }
 module_init(xhci_hcd_init);
-
-static void __exit xhci_hcd_cleanup(void)
-{
-	xhci_unregister_pci();
-	xhci_unregister_plat();
-}
-module_exit(xhci_hcd_cleanup);
diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h
index dace5152e179..df76d642e719 100644
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -1731,25 +1731,6 @@ void xhci_urb_free_priv(struct xhci_hcd *xhci, struct urb_priv *urb_priv);
 void xhci_free_command(struct xhci_hcd *xhci,
 		struct xhci_command *command);
 
-#ifdef CONFIG_PCI
-/* xHCI PCI glue */
-int xhci_register_pci(void);
-void xhci_unregister_pci(void);
-#else
-static inline int xhci_register_pci(void) { return 0; }
-static inline void xhci_unregister_pci(void) {}
-#endif
-
-#if IS_ENABLED(CONFIG_USB_XHCI_PLATFORM)
-int xhci_register_plat(void);
-void xhci_unregister_plat(void);
-#else
-static inline int xhci_register_plat(void)
-{ return 0; }
-static inline void xhci_unregister_plat(void)
-{  }
-#endif
-
 /* xHCI host controller glue */
 typedef void (*xhci_get_quirks_t)(struct device *, struct xhci_hcd *);
 int xhci_handshake(struct xhci_hcd *xhci, void __iomem *ptr,
@@ -1762,6 +1743,7 @@ int xhci_run(struct usb_hcd *hcd);
 void xhci_stop(struct usb_hcd *hcd);
 void xhci_shutdown(struct usb_hcd *hcd);
 int xhci_gen_setup(struct usb_hcd *hcd, xhci_get_quirks_t get_quirks);
+void xhci_init_driver(struct hc_driver *drv, int (*setup_fn)(struct usb_hcd *));
 
 #ifdef	CONFIG_PM
 int xhci_suspend(struct xhci_hcd *xhci);
@@ -1804,9 +1786,9 @@ void xhci_reset_bandwidth(struct usb_hcd *hcd, struct usb_device *udev);
 
 /* xHCI ring, segment, TRB, and TD functions */
 dma_addr_t xhci_trb_virt_to_dma(struct xhci_segment *seg, union xhci_trb *trb);
-struct xhci_segment *trb_in_td(struct xhci_segment *start_seg,
-		union xhci_trb *start_trb, union xhci_trb *end_trb,
-		dma_addr_t suspect_dma);
+struct xhci_segment *trb_in_td(struct xhci_hcd *xhci,
+		struct xhci_segment *start_seg, union xhci_trb *start_trb,
+		union xhci_trb *end_trb, dma_addr_t suspect_dma, bool debug);
 int xhci_is_vendor_info_code(struct xhci_hcd *xhci, unsigned int trb_comp_code);
 void xhci_ring_cmd_db(struct xhci_hcd *xhci);
 int xhci_queue_slot_control(struct xhci_hcd *xhci, struct xhci_command *cmd,
@@ -1839,7 +1821,6 @@ void xhci_find_new_dequeue_state(struct xhci_hcd *xhci,
 		unsigned int stream_id, struct xhci_td *cur_td,
 		struct xhci_dequeue_state *state);
 void xhci_queue_new_dequeue_state(struct xhci_hcd *xhci,
-		struct xhci_command *cmd,
 		unsigned int slot_id, unsigned int ep_index,
 		unsigned int stream_id,
 		struct xhci_dequeue_state *deq_state);
@@ -1887,7 +1868,4 @@ struct xhci_input_control_ctx *xhci_get_input_control_ctx(struct xhci_hcd *xhci,
 struct xhci_slot_ctx *xhci_get_slot_ctx(struct xhci_hcd *xhci, struct xhci_container_ctx *ctx);
 struct xhci_ep_ctx *xhci_get_ep_ctx(struct xhci_hcd *xhci, struct xhci_container_ctx *ctx, unsigned int ep_index);
 
-/* xHCI quirks */
-bool xhci_compliance_mode_recovery_timer_quirk_check(void);
-
 #endif /* __LINUX_XHCI_HCD_H */
diff --git a/drivers/usb/misc/lvstest.c b/drivers/usb/misc/lvstest.c
index 7d589c156fb1..62cb8cd08403 100644
--- a/drivers/usb/misc/lvstest.c
+++ b/drivers/usb/misc/lvstest.c
@@ -333,13 +333,13 @@ static void lvs_rh_work(struct work_struct *work)
 					USB_PORT_STAT_CONNECTION) {
 				lvs->present = true;
 				lvs->portnum = i;
-				if (hcd->phy)
-					usb_phy_notify_connect(hcd->phy,
+				if (hcd->usb_phy)
+					usb_phy_notify_connect(hcd->usb_phy,
 							USB_SPEED_SUPER);
 			} else {
 				lvs->present = false;
-				if (hcd->phy)
-					usb_phy_notify_disconnect(hcd->phy,
+				if (hcd->usb_phy)
+					usb_phy_notify_disconnect(hcd->usb_phy,
 							USB_SPEED_SUPER);
 			}
 			break;
diff --git a/drivers/usb/misc/usb3503.c b/drivers/usb/misc/usb3503.c
index 47cb143716a1..ae7e1206ca54 100644
--- a/drivers/usb/misc/usb3503.c
+++ b/drivers/usb/misc/usb3503.c
@@ -98,7 +98,7 @@ static int usb3503_connect(struct usb3503 *hub)
 			return err;
 		}
 
-		/* PDS : Disable For Self Powered Operation */
+		/* PDS : Set the ports which are disabled in self-powered mode. */
 		if (hub->port_off_mask) {
 			err = regmap_update_bits(hub->regmap, USB3503_PDS,
 					hub->port_off_mask,
@@ -109,7 +109,7 @@ static int usb3503_connect(struct usb3503 *hub)
 			}
 		}
 
-		/* CFG1 : SELF_BUS_PWR -> Self-Powerd operation */
+		/* CFG1 : Set SELF_BUS_PWR, this enables self-powered operation. */
 		err = regmap_update_bits(hub->regmap, USB3503_CFG1,
 					 USB3503_SELF_BUS_PWR,
 					 USB3503_SELF_BUS_PWR);
@@ -271,7 +271,7 @@ static int usb3503_probe(struct usb3503 *hub)
 					    "usb3503 intn");
 		if (err) {
 			dev_err(dev,
-				"unable to request GPIO %d as connect pin (%d)\n",
+				"unable to request GPIO %d as interrupt pin (%d)\n",
 				hub->gpio_intn, err);
 			return err;
 		}
diff --git a/drivers/usb/misc/usbtest.c b/drivers/usb/misc/usbtest.c
index 829f446064ea..0bbafe795a72 100644
--- a/drivers/usb/misc/usbtest.c
+++ b/drivers/usb/misc/usbtest.c
@@ -54,6 +54,7 @@ struct usbtest_info {
 	unsigned		autoconf:1;
 	unsigned		ctrl_out:1;
 	unsigned		iso:1;		/* try iso in/out */
+	unsigned		intr:1;		/* try interrupt in/out */
 	int			alt;
 };
 
@@ -70,7 +71,10 @@ struct usbtest_dev {
 	int			out_pipe;
 	int			in_iso_pipe;
 	int			out_iso_pipe;
+	int			in_int_pipe;
+	int			out_int_pipe;
 	struct usb_endpoint_descriptor	*iso_in, *iso_out;
+	struct usb_endpoint_descriptor	*int_in, *int_out;
 	struct mutex		lock;
 
 #define TBUF_SIZE	256
@@ -101,6 +105,7 @@ get_endpoints(struct usbtest_dev *dev, struct usb_interface *intf)
 	struct usb_host_interface	*alt;
 	struct usb_host_endpoint	*in, *out;
 	struct usb_host_endpoint	*iso_in, *iso_out;
+	struct usb_host_endpoint	*int_in, *int_out;
 	struct usb_device		*udev;
 
 	for (tmp = 0; tmp < intf->num_altsetting; tmp++) {
@@ -108,6 +113,7 @@ get_endpoints(struct usbtest_dev *dev, struct usb_interface *intf)
 
 		in = out = NULL;
 		iso_in = iso_out = NULL;
+		int_in = int_out = NULL;
 		alt = intf->altsetting + tmp;
 
 		if (override_alt >= 0 &&
@@ -124,6 +130,9 @@ get_endpoints(struct usbtest_dev *dev, struct usb_interface *intf)
 			switch (usb_endpoint_type(&e->desc)) {
 			case USB_ENDPOINT_XFER_BULK:
 				break;
+			case USB_ENDPOINT_XFER_INT:
+				if (dev->info->intr)
+					goto try_intr;
 			case USB_ENDPOINT_XFER_ISOC:
 				if (dev->info->iso)
 					goto try_iso;
@@ -139,6 +148,15 @@ get_endpoints(struct usbtest_dev *dev, struct usb_interface *intf)
 					out = e;
 			}
 			continue;
+try_intr:
+			if (usb_endpoint_dir_in(&e->desc)) {
+				if (!int_in)
+					int_in = e;
+			} else {
+				if (!int_out)
+					int_out = e;
+			}
+			continue;
 try_iso:
 			if (usb_endpoint_dir_in(&e->desc)) {
 				if (!iso_in)
@@ -148,7 +166,7 @@ try_iso:
 					iso_out = e;
 			}
 		}
-		if ((in && out)  ||  iso_in || iso_out)
+		if ((in && out)  ||  iso_in || iso_out || int_in || int_out)
 			goto found;
 	}
 	return -EINVAL;
@@ -183,6 +201,20 @@ found:
 				iso_out->desc.bEndpointAddress
 					& USB_ENDPOINT_NUMBER_MASK);
 	}
+
+	if (int_in) {
+		dev->int_in = &int_in->desc;
+		dev->in_int_pipe = usb_rcvintpipe(udev,
+				int_in->desc.bEndpointAddress
+					& USB_ENDPOINT_NUMBER_MASK);
+	}
+
+	if (int_out) {
+		dev->int_out = &int_out->desc;
+		dev->out_int_pipe = usb_sndintpipe(udev,
+				int_out->desc.bEndpointAddress
+					& USB_ENDPOINT_NUMBER_MASK);
+	}
 	return 0;
 }
 
@@ -205,14 +237,22 @@ static struct urb *usbtest_alloc_urb(
 	int			pipe,
 	unsigned long		bytes,
 	unsigned		transfer_flags,
-	unsigned		offset)
+	unsigned		offset,
+	u8			bInterval)
 {
 	struct urb		*urb;
 
 	urb = usb_alloc_urb(0, GFP_KERNEL);
 	if (!urb)
 		return urb;
-	usb_fill_bulk_urb(urb, udev, pipe, NULL, bytes, simple_callback, NULL);
+
+	if (bInterval)
+		usb_fill_int_urb(urb, udev, pipe, NULL, bytes, simple_callback,
+				NULL, bInterval);
+	else
+		usb_fill_bulk_urb(urb, udev, pipe, NULL, bytes, simple_callback,
+				NULL);
+
 	urb->interval = (udev->speed == USB_SPEED_HIGH)
 			? (INTERRUPT_RATE << 3)
 			: INTERRUPT_RATE;
@@ -251,9 +291,11 @@ static struct urb *usbtest_alloc_urb(
 static struct urb *simple_alloc_urb(
 	struct usb_device	*udev,
 	int			pipe,
-	unsigned long		bytes)
+	unsigned long		bytes,
+	u8			bInterval)
 {
-	return usbtest_alloc_urb(udev, pipe, bytes, URB_NO_TRANSFER_DMA_MAP, 0);
+	return usbtest_alloc_urb(udev, pipe, bytes, URB_NO_TRANSFER_DMA_MAP, 0,
+			bInterval);
 }
 
 static unsigned pattern;
@@ -1255,7 +1297,7 @@ test_ctrl_queue(struct usbtest_dev *dev, struct usbtest_param *param)
 			goto cleanup;
 		}
 		req.wLength = cpu_to_le16(len);
-		urb[i] = u = simple_alloc_urb(udev, pipe, len);
+		urb[i] = u = simple_alloc_urb(udev, pipe, len, 0);
 		if (!u)
 			goto cleanup;
 
@@ -1328,7 +1370,7 @@ static int unlink1(struct usbtest_dev *dev, int pipe, int size, int async)
 	int			retval = 0;
 
 	init_completion(&completion);
-	urb = simple_alloc_urb(testdev_to_usbdev(dev), pipe, size);
+	urb = simple_alloc_urb(testdev_to_usbdev(dev), pipe, size, 0);
 	if (!urb)
 		return -ENOMEM;
 	urb->context = &completion;
@@ -1616,9 +1658,9 @@ static int halt_simple(struct usbtest_dev *dev)
 	struct usb_device	*udev = testdev_to_usbdev(dev);
 
 	if (udev->speed == USB_SPEED_SUPER)
-		urb = simple_alloc_urb(udev, 0, 1024);
+		urb = simple_alloc_urb(udev, 0, 1024, 0);
 	else
-		urb = simple_alloc_urb(udev, 0, 512);
+		urb = simple_alloc_urb(udev, 0, 512, 0);
 	if (urb == NULL)
 		return -ENOMEM;
 
@@ -1962,7 +2004,7 @@ static int test_unaligned_bulk(
 {
 	int retval;
 	struct urb *urb = usbtest_alloc_urb(
-		testdev_to_usbdev(tdev), pipe, length, transfer_flags, 1);
+		testdev_to_usbdev(tdev), pipe, length, transfer_flags, 1, 0);
 
 	if (!urb)
 		return -ENOMEM;
@@ -1989,7 +2031,7 @@ static int test_unaligned_bulk(
  *
  * WARNING:  Because usbfs grabs udev->dev.sem before calling this ioctl(),
  * it locks out usbcore in certain code paths.  Notably, if you disconnect
- * the device-under-test, khubd will wait block forever waiting for the
+ * the device-under-test, hub_wq will wait block forever waiting for the
  * ioctl to complete ... so that usb_disconnect() can abort the pending
  * urbs and then call usbtest_disconnect().  To abort a test, you're best
  * off just killing the userspace task and waiting for it to exit.
@@ -2068,7 +2110,7 @@ usbtest_ioctl(struct usb_interface *intf, unsigned int code, void *buf)
 		dev_info(&intf->dev,
 				"TEST 1:  write %d bytes %u times\n",
 				param->length, param->iterations);
-		urb = simple_alloc_urb(udev, dev->out_pipe, param->length);
+		urb = simple_alloc_urb(udev, dev->out_pipe, param->length, 0);
 		if (!urb) {
 			retval = -ENOMEM;
 			break;
@@ -2083,7 +2125,7 @@ usbtest_ioctl(struct usb_interface *intf, unsigned int code, void *buf)
 		dev_info(&intf->dev,
 				"TEST 2:  read %d bytes %u times\n",
 				param->length, param->iterations);
-		urb = simple_alloc_urb(udev, dev->in_pipe, param->length);
+		urb = simple_alloc_urb(udev, dev->in_pipe, param->length, 0);
 		if (!urb) {
 			retval = -ENOMEM;
 			break;
@@ -2098,7 +2140,7 @@ usbtest_ioctl(struct usb_interface *intf, unsigned int code, void *buf)
 		dev_info(&intf->dev,
 				"TEST 3:  write/%d 0..%d bytes %u times\n",
 				param->vary, param->length, param->iterations);
-		urb = simple_alloc_urb(udev, dev->out_pipe, param->length);
+		urb = simple_alloc_urb(udev, dev->out_pipe, param->length, 0);
 		if (!urb) {
 			retval = -ENOMEM;
 			break;
@@ -2114,7 +2156,7 @@ usbtest_ioctl(struct usb_interface *intf, unsigned int code, void *buf)
 		dev_info(&intf->dev,
 				"TEST 4:  read/%d 0..%d bytes %u times\n",
 				param->vary, param->length, param->iterations);
-		urb = simple_alloc_urb(udev, dev->in_pipe, param->length);
+		urb = simple_alloc_urb(udev, dev->in_pipe, param->length, 0);
 		if (!urb) {
 			retval = -ENOMEM;
 			break;
@@ -2411,6 +2453,39 @@ usbtest_ioctl(struct usb_interface *intf, unsigned int code, void *buf)
 		}
 		break;
 
+	/* Simple non-queued interrupt I/O tests */
+	case 25:
+		if (dev->out_int_pipe == 0)
+			break;
+		dev_info(&intf->dev,
+				"TEST 25: write %d bytes %u times\n",
+				param->length, param->iterations);
+		urb = simple_alloc_urb(udev, dev->out_int_pipe, param->length,
+				dev->int_out->bInterval);
+		if (!urb) {
+			retval = -ENOMEM;
+			break;
+		}
+		/* FIRMWARE: interrupt sink (maybe accepts short writes) */
+		retval = simple_io(dev, urb, param->iterations, 0, 0, "test25");
+		simple_free_urb(urb);
+		break;
+	case 26:
+		if (dev->in_int_pipe == 0)
+			break;
+		dev_info(&intf->dev,
+				"TEST 26: read %d bytes %u times\n",
+				param->length, param->iterations);
+		urb = simple_alloc_urb(udev, dev->in_int_pipe, param->length,
+				dev->int_in->bInterval);
+		if (!urb) {
+			retval = -ENOMEM;
+			break;
+		}
+		/* FIRMWARE: interrupt source (maybe generates short writes) */
+		retval = simple_io(dev, urb, param->iterations, 0, 0, "test26");
+		simple_free_urb(urb);
+		break;
 	}
 	do_gettimeofday(&param->duration);
 	param->duration.tv_sec -= start.tv_sec;
@@ -2447,6 +2522,7 @@ usbtest_probe(struct usb_interface *intf, const struct usb_device_id *id)
 	struct usbtest_info	*info;
 	char			*rtest, *wtest;
 	char			*irtest, *iwtest;
+	char			*intrtest, *intwtest;
 
 	udev = interface_to_usbdev(intf);
 
@@ -2487,6 +2563,7 @@ usbtest_probe(struct usb_interface *intf, const struct usb_device_id *id)
 	 */
 	rtest = wtest = "";
 	irtest = iwtest = "";
+	intrtest = intwtest = "";
 	if (force_interrupt || udev->speed == USB_SPEED_LOW) {
 		if (info->ep_in) {
 			dev->in_pipe = usb_rcvintpipe(udev, info->ep_in);
@@ -2525,15 +2602,20 @@ usbtest_probe(struct usb_interface *intf, const struct usb_device_id *id)
 			irtest = " iso-in";
 		if (dev->out_iso_pipe)
 			iwtest = " iso-out";
+		if (dev->in_int_pipe)
+			intrtest = " int-in";
+		if (dev->out_int_pipe)
+			intwtest = " int-out";
 	}
 
 	usb_set_intfdata(intf, dev);
 	dev_info(&intf->dev, "%s\n", info->name);
-	dev_info(&intf->dev, "%s {control%s%s%s%s%s} tests%s\n",
+	dev_info(&intf->dev, "%s {control%s%s%s%s%s%s%s} tests%s\n",
 			usb_speed_string(udev->speed),
 			info->ctrl_out ? " in/out" : "",
 			rtest, wtest,
 			irtest, iwtest,
+			intrtest, intwtest,
 			info->alt >= 0 ? " (+alt)" : "");
 	return 0;
 }
@@ -2607,6 +2689,7 @@ static struct usbtest_info gz_info = {
 	.autoconf	= 1,
 	.ctrl_out	= 1,
 	.iso		= 1,
+	.intr		= 1,
 	.alt		= 0,
 };
 
diff --git a/drivers/usb/misc/yurex.c b/drivers/usb/misc/yurex.c
index 1472805083de..c3a45da11610 100644
--- a/drivers/usb/misc/yurex.c
+++ b/drivers/usb/misc/yurex.c
@@ -358,7 +358,7 @@ static int yurex_fasync(int fd, struct file *file, int on)
 {
 	struct usb_yurex *dev;
 
-	dev = (struct usb_yurex *)file->private_data;
+	dev = file->private_data;
 	return fasync_helper(fd, file, on, &dev->async_queue);
 }
 
@@ -401,7 +401,7 @@ static int yurex_release(struct inode *inode, struct file *file)
 {
 	struct usb_yurex *dev;
 
-	dev = (struct usb_yurex *)file->private_data;
+	dev = file->private_data;
 	if (dev == NULL)
 		return -ENODEV;
 
@@ -418,7 +418,7 @@ static ssize_t yurex_read(struct file *file, char *buffer, size_t count, loff_t
 	char in_buffer[20];
 	unsigned long flags;
 
-	dev = (struct usb_yurex *)file->private_data;
+	dev = file->private_data;
 
 	mutex_lock(&dev->io_mutex);
 	if (!dev->interface) {		/* already disconnected */
@@ -455,7 +455,7 @@ static ssize_t yurex_write(struct file *file, const char *user_buffer, size_t co
 	DEFINE_WAIT(wait);
 
 	count = min(sizeof(buffer), count);
-	dev = (struct usb_yurex *)file->private_data;
+	dev = file->private_data;
 
 	/* verify that we actually have some data to write */
 	if (count == 0)
diff --git a/drivers/usb/musb/am35x.c b/drivers/usb/musb/am35x.c
index 0a34dd859555..a2735df24cc6 100644
--- a/drivers/usb/musb/am35x.c
+++ b/drivers/usb/musb/am35x.c
@@ -1,3 +1,4 @@
+
 /*
  * Texas Instruments AM35x "glue layer"
  *
diff --git a/drivers/usb/musb/musb_cppi41.c b/drivers/usb/musb/musb_cppi41.c
index 3ee133f675ab..acdfb3e68a90 100644
--- a/drivers/usb/musb/musb_cppi41.c
+++ b/drivers/usb/musb/musb_cppi41.c
@@ -212,7 +212,7 @@ static enum hrtimer_restart cppi41_recheck_tx_req(struct hrtimer *timer)
 	if (!list_empty(&controller->early_tx_list)) {
 		ret = HRTIMER_RESTART;
 		hrtimer_forward_now(&controller->early_tx,
-				ktime_set(0, 50 * NSEC_PER_USEC));
+				ktime_set(0, 20 * NSEC_PER_USEC));
 	}
 
 	spin_unlock_irqrestore(&musb->lock, flags);
@@ -290,7 +290,7 @@ static void cppi41_dma_callback(void *private_data)
 
 			hrtimer_start_range_ns(&controller->early_tx,
 				ktime_set(0, usecs * NSEC_PER_USEC),
-				40 * NSEC_PER_USEC,
+				20 * NSEC_PER_USEC,
 				HRTIMER_MODE_REL);
 		}
 	}
diff --git a/drivers/usb/musb/musb_dsps.c b/drivers/usb/musb/musb_dsps.c
index c791ba5da91a..154bcf1b5dfa 100644
--- a/drivers/usb/musb/musb_dsps.c
+++ b/drivers/usb/musb/musb_dsps.c
@@ -870,6 +870,7 @@ static int dsps_suspend(struct device *dev)
 	struct musb *musb = platform_get_drvdata(glue->musb);
 	void __iomem *mbase = musb->ctrl_base;
 
+	del_timer_sync(&glue->timer);
 	glue->context.control = dsps_readl(mbase, wrp->control);
 	glue->context.epintr = dsps_readl(mbase, wrp->epintr_set);
 	glue->context.coreintr = dsps_readl(mbase, wrp->coreintr_set);
@@ -895,6 +896,7 @@ static int dsps_resume(struct device *dev)
 	dsps_writel(mbase, wrp->mode, glue->context.mode);
 	dsps_writel(mbase, wrp->tx_mode, glue->context.tx_mode);
 	dsps_writel(mbase, wrp->rx_mode, glue->context.rx_mode);
+	setup_timer(&glue->timer, otg_timer, (unsigned long) musb);
 
 	return 0;
 }
diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c
index d4aa779339f1..24c8c0219790 100644
--- a/drivers/usb/musb/musb_gadget.c
+++ b/drivers/usb/musb/musb_gadget.c
@@ -176,7 +176,7 @@ __acquires(ep->musb->lock)
 				ep->end_point.name, request,
 				req->request.actual, req->request.length,
 				request->status);
-	req->request.complete(&req->ep->end_point, &req->request);
+	usb_gadget_giveback_request(&req->ep->end_point, &req->request);
 	spin_lock(&musb->lock);
 	ep->busy = busy;
 }
diff --git a/drivers/usb/musb/musb_regs.h b/drivers/usb/musb/musb_regs.h
index b9bcda5e3945..37122a480bc1 100644
--- a/drivers/usb/musb/musb_regs.h
+++ b/drivers/usb/musb/musb_regs.h
@@ -577,7 +577,7 @@ static inline u16 musb_read_hwvers(void __iomem *mbase)
 {
 	/*
 	 * This register is invisible on Blackfin, actually the MUSB
-	 * RTL version of Blackfin is 1.9, so just harcode its value.
+	 * RTL version of Blackfin is 1.9, so just hardcode its value.
 	 */
 	return MUSB_HWVERS_1900;
 }
diff --git a/drivers/usb/musb/tusb6010.c b/drivers/usb/musb/tusb6010.c
index 7dfc6cb732c9..2daa779f1382 100644
--- a/drivers/usb/musb/tusb6010.c
+++ b/drivers/usb/musb/tusb6010.c
@@ -433,7 +433,7 @@ static void musb_do_idle(unsigned long _musb)
 	if (!musb->is_active) {
 		u32	wakeups;
 
-		/* wait until khubd handles port change status */
+		/* wait until hub_wq handles port change status */
 		if (is_host_active(musb) && (musb->port1_status >> 16))
 			goto done;
 
diff --git a/drivers/usb/phy/Kconfig b/drivers/usb/phy/Kconfig
index e253fa05be68..0cd1f44f0ee8 100644
--- a/drivers/usb/phy/Kconfig
+++ b/drivers/usb/phy/Kconfig
@@ -78,22 +78,6 @@ config SAMSUNG_USBPHY
 	  This driver provides common interface to interact, for Samsung USB 2.0 PHY
 	  driver and later for Samsung USB 3.0 PHY driver.
 
-config SAMSUNG_USB2PHY
-	tristate "Samsung USB 2.0 PHY controller Driver"
-	select SAMSUNG_USBPHY
-	select USB_PHY
-	help
-	  Enable this to support Samsung USB 2.0 (High Speed) PHY controller
-	  driver for Samsung SoCs.
-
-config SAMSUNG_USB3PHY
-	tristate "Samsung USB 3.0 PHY controller Driver"
-	select SAMSUNG_USBPHY
-	select USB_PHY
-	help
-	  Enable this to support Samsung USB 3.0 (Super Speed) phy controller
-	  for samsung SoCs.
-
 config TWL6030_USB
 	tristate "TWL6030 USB Transceiver Driver"
 	depends on TWL4030_CORE && OMAP_USB2 && USB_MUSB_OMAP2PLUS
diff --git a/drivers/usb/phy/Makefile b/drivers/usb/phy/Makefile
index 24a91332d4ad..75f2bba58c84 100644
--- a/drivers/usb/phy/Makefile
+++ b/drivers/usb/phy/Makefile
@@ -15,8 +15,6 @@ obj-$(CONFIG_AM335X_CONTROL_USB)	+= phy-am335x-control.o
 obj-$(CONFIG_AM335X_PHY_USB)		+= phy-am335x.o
 obj-$(CONFIG_OMAP_OTG)			+= phy-omap-otg.o
 obj-$(CONFIG_SAMSUNG_USBPHY)		+= phy-samsung-usb.o
-obj-$(CONFIG_SAMSUNG_USB2PHY)		+= phy-samsung-usb2.o
-obj-$(CONFIG_SAMSUNG_USB3PHY)		+= phy-samsung-usb3.o
 obj-$(CONFIG_TWL6030_USB)		+= phy-twl6030-usb.o
 obj-$(CONFIG_USB_EHCI_TEGRA)		+= phy-tegra-usb.o
 obj-$(CONFIG_USB_GPIO_VBUS)		+= phy-gpio-vbus-usb.o
diff --git a/drivers/usb/phy/phy-fsl-usb.c b/drivers/usb/phy/phy-fsl-usb.c
index 2b0f968d9325..f1ea5990a50a 100644
--- a/drivers/usb/phy/phy-fsl-usb.c
+++ b/drivers/usb/phy/phy-fsl-usb.c
@@ -609,7 +609,7 @@ static int fsl_otg_set_host(struct usb_otg *otg, struct usb_bus *host)
 		otg->host->otg_port = fsl_otg_initdata.otg_port;
 		otg->host->is_b_host = otg_dev->fsm.id;
 		/*
-		 * must leave time for khubd to finish its thing
+		 * must leave time for hub_wq to finish its thing
 		 * before yanking the host driver out from under it,
 		 * so suspend the host after a short delay.
 		 */
diff --git a/drivers/usb/phy/phy-isp1301-omap.c b/drivers/usb/phy/phy-isp1301-omap.c
index 69e49be8866b..8eea56d3ded6 100644
--- a/drivers/usb/phy/phy-isp1301-omap.c
+++ b/drivers/usb/phy/phy-isp1301-omap.c
@@ -1011,7 +1011,7 @@ static void isp_update_otg(struct isp1301 *isp, u8 stat)
 				break;
 			case OTG_STATE_A_WAIT_VFALL:
 				state = OTG_STATE_A_IDLE;
-				/* khubd may take a while to notice and
+				/* hub_wq may take a while to notice and
 				 * handle this disconnect, so don't go
 				 * to B_IDLE quite yet.
 				 */
diff --git a/drivers/usb/phy/phy-msm-usb.c b/drivers/usb/phy/phy-msm-usb.c
index afc09087ec36..7843ef7dd0ff 100644
--- a/drivers/usb/phy/phy-msm-usb.c
+++ b/drivers/usb/phy/phy-msm-usb.c
@@ -281,7 +281,7 @@ static int msm_otg_phy_clk_reset(struct msm_otg *motg)
 {
 	int ret = 0;
 
-	if (motg->pdata->phy_clk_reset && motg->phy_reset_clk)
+	if (motg->pdata->phy_clk_reset)
 		ret = motg->pdata->phy_clk_reset(motg->phy_reset_clk);
 	else if (motg->phy_rst)
 		ret = reset_control_reset(motg->phy_rst);
@@ -1394,7 +1394,7 @@ out:
 	return status;
 }
 
-const struct file_operations msm_otg_mode_fops = {
+static const struct file_operations msm_otg_mode_fops = {
 	.open = msm_otg_mode_open,
 	.read = seq_read,
 	.write = msm_otg_mode_write,
@@ -1554,11 +1554,14 @@ static int msm_otg_probe(struct platform_device *pdev)
 	phy = &motg->phy;
 	phy->dev = &pdev->dev;
 
-	motg->phy_reset_clk = devm_clk_get(&pdev->dev,
+	if (motg->pdata->phy_clk_reset) {
+		motg->phy_reset_clk = devm_clk_get(&pdev->dev,
 					   np ? "phy" : "usb_phy_clk");
-	if (IS_ERR(motg->phy_reset_clk)) {
-		dev_err(&pdev->dev, "failed to get usb_phy_clk\n");
-		motg->phy_reset_clk = NULL;
+
+		if (IS_ERR(motg->phy_reset_clk)) {
+			dev_err(&pdev->dev, "failed to get usb_phy_clk\n");
+			return PTR_ERR(motg->phy_reset_clk);
+		}
 	}
 
 	motg->clk = devm_clk_get(&pdev->dev, np ? "core" : "usb_hs_clk");
@@ -1838,7 +1841,6 @@ static struct platform_driver msm_otg_driver = {
 	.remove = msm_otg_remove,
 	.driver = {
 		.name = DRIVER_NAME,
-		.owner = THIS_MODULE,
 		.pm = &msm_otg_dev_pm_ops,
 		.of_match_table = msm_otg_dt_match,
 	},
diff --git a/drivers/usb/phy/phy-mxs-usb.c b/drivers/usb/phy/phy-mxs-usb.c
index 00972eca04e7..0e0c41587a08 100644
--- a/drivers/usb/phy/phy-mxs-usb.c
+++ b/drivers/usb/phy/phy-mxs-usb.c
@@ -125,6 +125,11 @@ static const struct mxs_phy_data imx6sl_phy_data = {
 		MXS_PHY_NEED_IP_FIX,
 };
 
+static const struct mxs_phy_data vf610_phy_data = {
+	.flags = MXS_PHY_DISCONNECT_LINE_WITHOUT_VBUS |
+		MXS_PHY_NEED_IP_FIX,
+};
+
 static const struct mxs_phy_data imx6sx_phy_data = {
 	.flags = MXS_PHY_DISCONNECT_LINE_WITHOUT_VBUS |
 		MXS_PHY_NEED_IP_FIX,
@@ -135,6 +140,7 @@ static const struct of_device_id mxs_phy_dt_ids[] = {
 	{ .compatible = "fsl,imx6sl-usbphy", .data = &imx6sl_phy_data, },
 	{ .compatible = "fsl,imx6q-usbphy", .data = &imx6q_phy_data, },
 	{ .compatible = "fsl,imx23-usbphy", .data = &imx23_phy_data, },
+	{ .compatible = "fsl,vf610-usbphy", .data = &vf610_phy_data, },
 	{ /* sentinel */ }
 };
 MODULE_DEVICE_TABLE(of, mxs_phy_dt_ids);
diff --git a/drivers/usb/phy/phy-samsung-usb.c b/drivers/usb/phy/phy-samsung-usb.c
deleted file mode 100644
index ac025ca08425..000000000000
--- a/drivers/usb/phy/phy-samsung-usb.c
+++ /dev/null
@@ -1,241 +0,0 @@
-/* linux/drivers/usb/phy/phy-samsung-usb.c
- *
- * Copyright (c) 2012 Samsung Electronics Co., Ltd.
- *              http://www.samsung.com
- *
- * Author: Praveen Paneri <p.paneri@samsung.com>
- *
- * Samsung USB-PHY helper driver with common function calls;
- * interacts with Samsung USB 2.0 PHY controller driver and later
- * with Samsung USB 3.0 PHY driver.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/clk.h>
-#include <linux/device.h>
-#include <linux/err.h>
-#include <linux/io.h>
-#include <linux/of.h>
-#include <linux/of_address.h>
-#include <linux/usb/samsung_usb_phy.h>
-
-#include "phy-samsung-usb.h"
-
-int samsung_usbphy_parse_dt(struct samsung_usbphy *sphy)
-{
-	struct device_node *usbphy_sys;
-
-	/* Getting node for system controller interface for usb-phy */
-	usbphy_sys = of_get_child_by_name(sphy->dev->of_node, "usbphy-sys");
-	if (!usbphy_sys) {
-		dev_err(sphy->dev, "No sys-controller interface for usb-phy\n");
-		return -ENODEV;
-	}
-
-	sphy->pmuregs = of_iomap(usbphy_sys, 0);
-
-	if (sphy->pmuregs == NULL) {
-		dev_err(sphy->dev, "Can't get usb-phy pmu control register\n");
-		goto err0;
-	}
-
-	sphy->sysreg = of_iomap(usbphy_sys, 1);
-
-	/*
-	 * Not returning error code here, since this situation is not fatal.
-	 * Few SoCs may not have this switch available
-	 */
-	if (sphy->sysreg == NULL)
-		dev_warn(sphy->dev, "Can't get usb-phy sysreg cfg register\n");
-
-	of_node_put(usbphy_sys);
-
-	return 0;
-
-err0:
-	of_node_put(usbphy_sys);
-	return -ENXIO;
-}
-EXPORT_SYMBOL_GPL(samsung_usbphy_parse_dt);
-
-/*
- * Set isolation here for phy.
- * Here 'on = true' would mean USB PHY block is isolated, hence
- * de-activated and vice-versa.
- */
-void samsung_usbphy_set_isolation_4210(struct samsung_usbphy *sphy, bool on)
-{
-	void __iomem *reg = NULL;
-	u32 reg_val;
-	u32 en_mask = 0;
-
-	if (!sphy->pmuregs) {
-		dev_warn(sphy->dev, "Can't set pmu isolation\n");
-		return;
-	}
-
-	if (sphy->phy_type == USB_PHY_TYPE_DEVICE) {
-		reg = sphy->pmuregs + sphy->drv_data->devphy_reg_offset;
-		en_mask = sphy->drv_data->devphy_en_mask;
-	} else if (sphy->phy_type == USB_PHY_TYPE_HOST) {
-		reg = sphy->pmuregs + sphy->drv_data->hostphy_reg_offset;
-		en_mask = sphy->drv_data->hostphy_en_mask;
-	}
-
-	reg_val = readl(reg);
-
-	if (on)
-		reg_val &= ~en_mask;
-	else
-		reg_val |= en_mask;
-
-	writel(reg_val, reg);
-
-	if (sphy->drv_data->cpu_type == TYPE_EXYNOS4X12) {
-		writel(reg_val, sphy->pmuregs + EXYNOS4X12_PHY_HSIC_CTRL0);
-		writel(reg_val, sphy->pmuregs + EXYNOS4X12_PHY_HSIC_CTRL1);
-	}
-}
-EXPORT_SYMBOL_GPL(samsung_usbphy_set_isolation_4210);
-
-/*
- * Configure the mode of working of usb-phy here: HOST/DEVICE.
- */
-void samsung_usbphy_cfg_sel(struct samsung_usbphy *sphy)
-{
-	u32 reg;
-
-	if (!sphy->sysreg) {
-		dev_warn(sphy->dev, "Can't configure specified phy mode\n");
-		return;
-	}
-
-	reg = readl(sphy->sysreg);
-
-	if (sphy->phy_type == USB_PHY_TYPE_DEVICE)
-		reg &= ~EXYNOS_USB20PHY_CFG_HOST_LINK;
-	else if (sphy->phy_type == USB_PHY_TYPE_HOST)
-		reg |= EXYNOS_USB20PHY_CFG_HOST_LINK;
-
-	writel(reg, sphy->sysreg);
-}
-EXPORT_SYMBOL_GPL(samsung_usbphy_cfg_sel);
-
-/*
- * PHYs are different for USB Device and USB Host.
- * This make sure that correct PHY type is selected before
- * any operation on PHY.
- */
-int samsung_usbphy_set_type(struct usb_phy *phy,
-				enum samsung_usb_phy_type phy_type)
-{
-	struct samsung_usbphy *sphy = phy_to_sphy(phy);
-
-	sphy->phy_type = phy_type;
-
-	return 0;
-}
-EXPORT_SYMBOL_GPL(samsung_usbphy_set_type);
-
-int samsung_usbphy_rate_to_clksel_64xx(struct samsung_usbphy *sphy,
-							unsigned long rate)
-{
-	unsigned int clksel;
-
-	switch (rate) {
-	case 12 * MHZ:
-		clksel = PHYCLK_CLKSEL_12M;
-		break;
-	case 24 * MHZ:
-		clksel = PHYCLK_CLKSEL_24M;
-		break;
-	case 48 * MHZ:
-		clksel = PHYCLK_CLKSEL_48M;
-		break;
-	default:
-		dev_err(sphy->dev,
-			"Invalid reference clock frequency: %lu\n", rate);
-		return -EINVAL;
-	}
-
-	return clksel;
-}
-EXPORT_SYMBOL_GPL(samsung_usbphy_rate_to_clksel_64xx);
-
-int samsung_usbphy_rate_to_clksel_4x12(struct samsung_usbphy *sphy,
-							unsigned long rate)
-{
-	unsigned int clksel;
-
-	switch (rate) {
-	case 9600 * KHZ:
-		clksel = FSEL_CLKSEL_9600K;
-		break;
-	case 10 * MHZ:
-		clksel = FSEL_CLKSEL_10M;
-		break;
-	case 12 * MHZ:
-		clksel = FSEL_CLKSEL_12M;
-		break;
-	case 19200 * KHZ:
-		clksel = FSEL_CLKSEL_19200K;
-		break;
-	case 20 * MHZ:
-		clksel = FSEL_CLKSEL_20M;
-		break;
-	case 24 * MHZ:
-		clksel = FSEL_CLKSEL_24M;
-		break;
-	case 50 * MHZ:
-		clksel = FSEL_CLKSEL_50M;
-		break;
-	default:
-		dev_err(sphy->dev,
-			"Invalid reference clock frequency: %lu\n", rate);
-		return -EINVAL;
-	}
-
-	return clksel;
-}
-EXPORT_SYMBOL_GPL(samsung_usbphy_rate_to_clksel_4x12);
-
-/*
- * Returns reference clock frequency selection value
- */
-int samsung_usbphy_get_refclk_freq(struct samsung_usbphy *sphy)
-{
-	struct clk *ref_clk;
-	unsigned long rate;
-	int refclk_freq;
-
-	/*
-	 * In exynos5250 USB host and device PHY use
-	 * external crystal clock XXTI
-	 */
-	if (sphy->drv_data->cpu_type == TYPE_EXYNOS5250)
-		ref_clk = clk_get(sphy->dev, "ext_xtal");
-	else
-		ref_clk = clk_get(sphy->dev, "xusbxti");
-	if (IS_ERR(ref_clk)) {
-		dev_err(sphy->dev, "Failed to get reference clock\n");
-		return PTR_ERR(ref_clk);
-	}
-
-	rate = clk_get_rate(ref_clk);
-	refclk_freq = sphy->drv_data->rate_to_clksel(sphy, rate);
-
-	clk_put(ref_clk);
-
-	return refclk_freq;
-}
-EXPORT_SYMBOL_GPL(samsung_usbphy_get_refclk_freq);
diff --git a/drivers/usb/phy/phy-samsung-usb.h b/drivers/usb/phy/phy-samsung-usb.h
deleted file mode 100644
index 80eedd45a20a..000000000000
--- a/drivers/usb/phy/phy-samsung-usb.h
+++ /dev/null
@@ -1,349 +0,0 @@
-/* linux/drivers/usb/phy/phy-samsung-usb.h
- *
- * Copyright (c) 2012 Samsung Electronics Co., Ltd.
- *              http://www.samsung.com
- *
- * Samsung USB-PHY transceiver; talks to S3C HS OTG controller, EHCI-S5P and
- * OHCI-EXYNOS controllers.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#include <linux/usb/phy.h>
-
-/* Register definitions */
-
-#define SAMSUNG_PHYPWR				(0x00)
-
-#define PHYPWR_NORMAL_MASK			(0x19 << 0)
-#define PHYPWR_OTG_DISABLE			(0x1 << 4)
-#define PHYPWR_ANALOG_POWERDOWN			(0x1 << 3)
-#define PHYPWR_FORCE_SUSPEND			(0x1 << 1)
-/* For Exynos4 */
-#define PHYPWR_NORMAL_MASK_PHY0			(0x39 << 0)
-#define PHYPWR_SLEEP_PHY0			(0x1 << 5)
-
-#define SAMSUNG_PHYCLK				(0x04)
-
-#define PHYCLK_MODE_USB11			(0x1 << 6)
-#define PHYCLK_EXT_OSC				(0x1 << 5)
-#define PHYCLK_COMMON_ON_N			(0x1 << 4)
-#define PHYCLK_ID_PULL				(0x1 << 2)
-#define PHYCLK_CLKSEL_MASK			(0x3 << 0)
-#define PHYCLK_CLKSEL_48M			(0x0 << 0)
-#define PHYCLK_CLKSEL_12M			(0x2 << 0)
-#define PHYCLK_CLKSEL_24M			(0x3 << 0)
-
-#define SAMSUNG_RSTCON				(0x08)
-
-#define RSTCON_PHYLINK_SWRST			(0x1 << 2)
-#define RSTCON_HLINK_SWRST			(0x1 << 1)
-#define RSTCON_SWRST				(0x1 << 0)
-
-/* EXYNOS4X12 */
-#define EXYNOS4X12_PHY_HSIC_CTRL0		(0x04)
-#define EXYNOS4X12_PHY_HSIC_CTRL1		(0x08)
-
-#define PHYPWR_NORMAL_MASK_HSIC1		(0x7 << 12)
-#define PHYPWR_NORMAL_MASK_HSIC0		(0x7 << 9)
-#define PHYPWR_NORMAL_MASK_PHY1			(0x7 << 6)
-
-#define RSTCON_HOSTPHY_SWRST			(0xf << 3)
-
-/* EXYNOS5 */
-#define EXYNOS5_PHY_HOST_CTRL0			(0x00)
-
-#define HOST_CTRL0_PHYSWRSTALL			(0x1 << 31)
-
-#define HOST_CTRL0_REFCLKSEL_MASK		(0x3 << 19)
-#define HOST_CTRL0_REFCLKSEL_XTAL		(0x0 << 19)
-#define HOST_CTRL0_REFCLKSEL_EXTL		(0x1 << 19)
-#define HOST_CTRL0_REFCLKSEL_CLKCORE		(0x2 << 19)
-
-#define HOST_CTRL0_FSEL_MASK			(0x7 << 16)
-#define HOST_CTRL0_FSEL(_x)			((_x) << 16)
-
-#define FSEL_CLKSEL_50M				(0x7)
-#define FSEL_CLKSEL_24M				(0x5)
-#define FSEL_CLKSEL_20M				(0x4)
-#define FSEL_CLKSEL_19200K			(0x3)
-#define FSEL_CLKSEL_12M				(0x2)
-#define FSEL_CLKSEL_10M				(0x1)
-#define FSEL_CLKSEL_9600K			(0x0)
-
-#define HOST_CTRL0_TESTBURNIN			(0x1 << 11)
-#define HOST_CTRL0_RETENABLE			(0x1 << 10)
-#define HOST_CTRL0_COMMONON_N			(0x1 << 9)
-#define HOST_CTRL0_SIDDQ			(0x1 << 6)
-#define HOST_CTRL0_FORCESLEEP			(0x1 << 5)
-#define HOST_CTRL0_FORCESUSPEND			(0x1 << 4)
-#define HOST_CTRL0_WORDINTERFACE		(0x1 << 3)
-#define HOST_CTRL0_UTMISWRST			(0x1 << 2)
-#define HOST_CTRL0_LINKSWRST			(0x1 << 1)
-#define HOST_CTRL0_PHYSWRST			(0x1 << 0)
-
-#define EXYNOS5_PHY_HOST_TUNE0			(0x04)
-
-#define EXYNOS5_PHY_HSIC_CTRL1			(0x10)
-
-#define EXYNOS5_PHY_HSIC_TUNE1			(0x14)
-
-#define EXYNOS5_PHY_HSIC_CTRL2			(0x20)
-
-#define EXYNOS5_PHY_HSIC_TUNE2			(0x24)
-
-#define HSIC_CTRL_REFCLKSEL_MASK		(0x3 << 23)
-#define HSIC_CTRL_REFCLKSEL			(0x2 << 23)
-
-#define HSIC_CTRL_REFCLKDIV_MASK		(0x7f << 16)
-#define HSIC_CTRL_REFCLKDIV(_x)			((_x) << 16)
-#define HSIC_CTRL_REFCLKDIV_12			(0x24 << 16)
-#define HSIC_CTRL_REFCLKDIV_15			(0x1c << 16)
-#define HSIC_CTRL_REFCLKDIV_16			(0x1a << 16)
-#define HSIC_CTRL_REFCLKDIV_19_2		(0x15 << 16)
-#define HSIC_CTRL_REFCLKDIV_20			(0x14 << 16)
-
-#define HSIC_CTRL_SIDDQ				(0x1 << 6)
-#define HSIC_CTRL_FORCESLEEP			(0x1 << 5)
-#define HSIC_CTRL_FORCESUSPEND			(0x1 << 4)
-#define HSIC_CTRL_WORDINTERFACE			(0x1 << 3)
-#define HSIC_CTRL_UTMISWRST			(0x1 << 2)
-#define HSIC_CTRL_PHYSWRST			(0x1 << 0)
-
-#define EXYNOS5_PHY_HOST_EHCICTRL		(0x30)
-
-#define HOST_EHCICTRL_ENAINCRXALIGN		(0x1 << 29)
-#define HOST_EHCICTRL_ENAINCR4			(0x1 << 28)
-#define HOST_EHCICTRL_ENAINCR8			(0x1 << 27)
-#define HOST_EHCICTRL_ENAINCR16			(0x1 << 26)
-
-#define EXYNOS5_PHY_HOST_OHCICTRL		(0x34)
-
-#define HOST_OHCICTRL_SUSPLGCY			(0x1 << 3)
-#define HOST_OHCICTRL_APPSTARTCLK		(0x1 << 2)
-#define HOST_OHCICTRL_CNTSEL			(0x1 << 1)
-#define HOST_OHCICTRL_CLKCKTRST			(0x1 << 0)
-
-#define EXYNOS5_PHY_OTG_SYS			(0x38)
-
-#define OTG_SYS_PHYLINK_SWRESET			(0x1 << 14)
-#define OTG_SYS_LINKSWRST_UOTG			(0x1 << 13)
-#define OTG_SYS_PHY0_SWRST			(0x1 << 12)
-
-#define OTG_SYS_REFCLKSEL_MASK			(0x3 << 9)
-#define OTG_SYS_REFCLKSEL_XTAL			(0x0 << 9)
-#define OTG_SYS_REFCLKSEL_EXTL			(0x1 << 9)
-#define OTG_SYS_REFCLKSEL_CLKCORE		(0x2 << 9)
-
-#define OTG_SYS_IDPULLUP_UOTG			(0x1 << 8)
-#define OTG_SYS_COMMON_ON			(0x1 << 7)
-
-#define OTG_SYS_FSEL_MASK			(0x7 << 4)
-#define OTG_SYS_FSEL(_x)			((_x) << 4)
-
-#define OTG_SYS_FORCESLEEP			(0x1 << 3)
-#define OTG_SYS_OTGDISABLE			(0x1 << 2)
-#define OTG_SYS_SIDDQ_UOTG			(0x1 << 1)
-#define OTG_SYS_FORCESUSPEND			(0x1 << 0)
-
-#define EXYNOS5_PHY_OTG_TUNE			(0x40)
-
-/* EXYNOS5: USB 3.0 DRD */
-#define EXYNOS5_DRD_LINKSYSTEM			(0x04)
-
-#define LINKSYSTEM_FLADJ_MASK			(0x3f << 1)
-#define LINKSYSTEM_FLADJ(_x)			((_x) << 1)
-#define LINKSYSTEM_XHCI_VERSION_CONTROL		(0x1 << 27)
-
-#define EXYNOS5_DRD_PHYUTMI			(0x08)
-
-#define PHYUTMI_OTGDISABLE			(0x1 << 6)
-#define PHYUTMI_FORCESUSPEND			(0x1 << 1)
-#define PHYUTMI_FORCESLEEP			(0x1 << 0)
-
-#define EXYNOS5_DRD_PHYPIPE			(0x0c)
-
-#define EXYNOS5_DRD_PHYCLKRST			(0x10)
-
-#define PHYCLKRST_SSC_REFCLKSEL_MASK		(0xff << 23)
-#define PHYCLKRST_SSC_REFCLKSEL(_x)		((_x) << 23)
-
-#define PHYCLKRST_SSC_RANGE_MASK		(0x03 << 21)
-#define PHYCLKRST_SSC_RANGE(_x)			((_x) << 21)
-
-#define PHYCLKRST_SSC_EN			(0x1 << 20)
-#define PHYCLKRST_REF_SSP_EN			(0x1 << 19)
-#define PHYCLKRST_REF_CLKDIV2			(0x1 << 18)
-
-#define PHYCLKRST_MPLL_MULTIPLIER_MASK		(0x7f << 11)
-#define PHYCLKRST_MPLL_MULTIPLIER_100MHZ_REF	(0x19 << 11)
-#define PHYCLKRST_MPLL_MULTIPLIER_50M_REF	(0x02 << 11)
-#define PHYCLKRST_MPLL_MULTIPLIER_24MHZ_REF	(0x68 << 11)
-#define PHYCLKRST_MPLL_MULTIPLIER_20MHZ_REF	(0x7d << 11)
-#define PHYCLKRST_MPLL_MULTIPLIER_19200KHZ_REF	(0x02 << 11)
-
-#define PHYCLKRST_FSEL_MASK			(0x3f << 5)
-#define PHYCLKRST_FSEL(_x)			((_x) << 5)
-#define PHYCLKRST_FSEL_PAD_100MHZ		(0x27 << 5)
-#define PHYCLKRST_FSEL_PAD_24MHZ		(0x2a << 5)
-#define PHYCLKRST_FSEL_PAD_20MHZ		(0x31 << 5)
-#define PHYCLKRST_FSEL_PAD_19_2MHZ		(0x38 << 5)
-
-#define PHYCLKRST_RETENABLEN			(0x1 << 4)
-
-#define PHYCLKRST_REFCLKSEL_MASK		(0x03 << 2)
-#define PHYCLKRST_REFCLKSEL_PAD_REFCLK		(0x2 << 2)
-#define PHYCLKRST_REFCLKSEL_EXT_REFCLK		(0x3 << 2)
-
-#define PHYCLKRST_PORTRESET			(0x1 << 1)
-#define PHYCLKRST_COMMONONN			(0x1 << 0)
-
-#define EXYNOS5_DRD_PHYREG0			(0x14)
-#define EXYNOS5_DRD_PHYREG1			(0x18)
-
-#define EXYNOS5_DRD_PHYPARAM0			(0x1c)
-
-#define PHYPARAM0_REF_USE_PAD			(0x1 << 31)
-#define PHYPARAM0_REF_LOSLEVEL_MASK		(0x1f << 26)
-#define PHYPARAM0_REF_LOSLEVEL			(0x9 << 26)
-
-#define EXYNOS5_DRD_PHYPARAM1			(0x20)
-
-#define PHYPARAM1_PCS_TXDEEMPH_MASK		(0x3f << 0)
-#define PHYPARAM1_PCS_TXDEEMPH			(0x1c)
-
-#define EXYNOS5_DRD_PHYTERM			(0x24)
-
-#define EXYNOS5_DRD_PHYTEST			(0x28)
-
-#define PHYTEST_POWERDOWN_SSP			(0x1 << 3)
-#define PHYTEST_POWERDOWN_HSP			(0x1 << 2)
-
-#define EXYNOS5_DRD_PHYADP			(0x2c)
-
-#define EXYNOS5_DRD_PHYBATCHG			(0x30)
-
-#define PHYBATCHG_UTMI_CLKSEL			(0x1 << 2)
-
-#define EXYNOS5_DRD_PHYRESUME			(0x34)
-#define EXYNOS5_DRD_LINKPORT			(0x44)
-
-#ifndef MHZ
-#define MHZ (1000*1000)
-#endif
-
-#ifndef KHZ
-#define KHZ (1000)
-#endif
-
-#define EXYNOS_USBHOST_PHY_CTRL_OFFSET		(0x4)
-#define S3C64XX_USBPHY_ENABLE			(0x1 << 16)
-#define EXYNOS_USBPHY_ENABLE			(0x1 << 0)
-#define EXYNOS_USB20PHY_CFG_HOST_LINK		(0x1 << 0)
-
-enum samsung_cpu_type {
-	TYPE_S3C64XX,
-	TYPE_EXYNOS4210,
-	TYPE_EXYNOS4X12,
-	TYPE_EXYNOS5250,
-};
-
-struct samsung_usbphy;
-
-/*
- * struct samsung_usbphy_drvdata - driver data for various SoC variants
- * @cpu_type: machine identifier
- * @devphy_en_mask: device phy enable mask for PHY CONTROL register
- * @hostphy_en_mask: host phy enable mask for PHY CONTROL register
- * @devphy_reg_offset: offset to DEVICE PHY CONTROL register from
- *		       mapped address of system controller.
- * @hostphy_reg_offset: offset to HOST PHY CONTROL register from
- *		       mapped address of system controller.
- *
- *	Here we have a separate mask for device type phy.
- *	Having different masks for host and device type phy helps
- *	in setting independent masks in case of SoCs like S5PV210,
- *	in which PHY0 and PHY1 enable bits belong to same register
- *	placed at position 0 and 1 respectively.
- *	Although for newer SoCs like exynos these bits belong to
- *	different registers altogether placed at position 0.
- */
-struct samsung_usbphy_drvdata {
-	int cpu_type;
-	int devphy_en_mask;
-	int hostphy_en_mask;
-	u32 devphy_reg_offset;
-	u32 hostphy_reg_offset;
-	int (*rate_to_clksel)(struct samsung_usbphy *, unsigned long);
-	void (*set_isolation)(struct samsung_usbphy *, bool);
-	void (*phy_enable)(struct samsung_usbphy *);
-	void (*phy_disable)(struct samsung_usbphy *);
-};
-
-/*
- * struct samsung_usbphy - transceiver driver state
- * @phy: transceiver structure
- * @plat: platform data
- * @dev: The parent device supplied to the probe function
- * @clk: usb phy clock
- * @regs: usb phy controller registers memory base
- * @pmuregs: USB device PHY_CONTROL register memory base
- * @sysreg: USB2.0 PHY_CFG register memory base
- * @ref_clk_freq: reference clock frequency selection
- * @drv_data: driver data available for different SoCs
- * @phy_type: Samsung SoCs specific phy types:	#HOST
- *						#DEVICE
- * @phy_usage: usage count for phy
- * @lock: lock for phy operations
- */
-struct samsung_usbphy {
-	struct usb_phy	phy;
-	struct samsung_usbphy_data *plat;
-	struct device	*dev;
-	struct clk	*clk;
-	void __iomem	*regs;
-	void __iomem	*pmuregs;
-	void __iomem	*sysreg;
-	int		ref_clk_freq;
-	const struct samsung_usbphy_drvdata *drv_data;
-	enum samsung_usb_phy_type phy_type;
-	atomic_t	phy_usage;
-	spinlock_t	lock;
-};
-
-#define phy_to_sphy(x)		container_of((x), struct samsung_usbphy, phy)
-
-static const struct of_device_id samsung_usbphy_dt_match[];
-
-static inline const struct samsung_usbphy_drvdata
-*samsung_usbphy_get_driver_data(struct platform_device *pdev)
-{
-	if (pdev->dev.of_node) {
-		const struct of_device_id *match;
-		match = of_match_node(samsung_usbphy_dt_match,
-							pdev->dev.of_node);
-		return match->data;
-	}
-
-	return (struct samsung_usbphy_drvdata *)
-				platform_get_device_id(pdev)->driver_data;
-}
-
-extern int samsung_usbphy_parse_dt(struct samsung_usbphy *sphy);
-extern void samsung_usbphy_set_isolation_4210(struct samsung_usbphy *sphy,
-								bool on);
-extern void samsung_usbphy_cfg_sel(struct samsung_usbphy *sphy);
-extern int samsung_usbphy_set_type(struct usb_phy *phy,
-					enum samsung_usb_phy_type phy_type);
-extern int samsung_usbphy_get_refclk_freq(struct samsung_usbphy *sphy);
-extern int samsung_usbphy_rate_to_clksel_64xx(struct samsung_usbphy *sphy,
-							unsigned long rate);
-extern int samsung_usbphy_rate_to_clksel_4x12(struct samsung_usbphy *sphy,
-							unsigned long rate);
diff --git a/drivers/usb/phy/phy-samsung-usb2.c b/drivers/usb/phy/phy-samsung-usb2.c
deleted file mode 100644
index b3ba86627b72..000000000000
--- a/drivers/usb/phy/phy-samsung-usb2.c
+++ /dev/null
@@ -1,541 +0,0 @@
-/* linux/drivers/usb/phy/phy-samsung-usb2.c
- *
- * Copyright (c) 2012 Samsung Electronics Co., Ltd.
- *              http://www.samsung.com
- *
- * Author: Praveen Paneri <p.paneri@samsung.com>
- *
- * Samsung USB2.0 PHY transceiver; talks to S3C HS OTG controller, EHCI-S5P and
- * OHCI-EXYNOS controllers.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/clk.h>
-#include <linux/delay.h>
-#include <linux/device.h>
-#include <linux/err.h>
-#include <linux/io.h>
-#include <linux/of.h>
-#include <linux/usb/otg.h>
-#include <linux/usb/samsung_usb_phy.h>
-#include <linux/platform_data/samsung-usbphy.h>
-
-#include "phy-samsung-usb.h"
-
-static int samsung_usbphy_set_host(struct usb_otg *otg, struct usb_bus *host)
-{
-	if (!otg)
-		return -ENODEV;
-
-	if (!otg->host)
-		otg->host = host;
-
-	return 0;
-}
-
-static bool exynos5_phyhost_is_on(void __iomem *regs)
-{
-	u32 reg;
-
-	reg = readl(regs + EXYNOS5_PHY_HOST_CTRL0);
-
-	return !(reg & HOST_CTRL0_SIDDQ);
-}
-
-static void samsung_exynos5_usb2phy_enable(struct samsung_usbphy *sphy)
-{
-	void __iomem *regs = sphy->regs;
-	u32 phyclk = sphy->ref_clk_freq;
-	u32 phyhost;
-	u32 phyotg;
-	u32 phyhsic;
-	u32 ehcictrl;
-	u32 ohcictrl;
-
-	/*
-	 * phy_usage helps in keeping usage count for phy
-	 * so that the first consumer enabling the phy is also
-	 * the last consumer to disable it.
-	 */
-
-	atomic_inc(&sphy->phy_usage);
-
-	if (exynos5_phyhost_is_on(regs)) {
-		dev_info(sphy->dev, "Already power on PHY\n");
-		return;
-	}
-
-	/* Host configuration */
-	phyhost = readl(regs + EXYNOS5_PHY_HOST_CTRL0);
-
-	/* phy reference clock configuration */
-	phyhost &= ~HOST_CTRL0_FSEL_MASK;
-	phyhost |= HOST_CTRL0_FSEL(phyclk);
-
-	/* host phy reset */
-	phyhost &= ~(HOST_CTRL0_PHYSWRST |
-			HOST_CTRL0_PHYSWRSTALL |
-			HOST_CTRL0_SIDDQ |
-			/* Enable normal mode of operation */
-			HOST_CTRL0_FORCESUSPEND |
-			HOST_CTRL0_FORCESLEEP);
-
-	/* Link reset */
-	phyhost |= (HOST_CTRL0_LINKSWRST |
-			HOST_CTRL0_UTMISWRST |
-			/* COMMON Block configuration during suspend */
-			HOST_CTRL0_COMMONON_N);
-	writel(phyhost, regs + EXYNOS5_PHY_HOST_CTRL0);
-	udelay(10);
-	phyhost &= ~(HOST_CTRL0_LINKSWRST |
-			HOST_CTRL0_UTMISWRST);
-	writel(phyhost, regs + EXYNOS5_PHY_HOST_CTRL0);
-
-	/* OTG configuration */
-	phyotg = readl(regs + EXYNOS5_PHY_OTG_SYS);
-
-	/* phy reference clock configuration */
-	phyotg &= ~OTG_SYS_FSEL_MASK;
-	phyotg |= OTG_SYS_FSEL(phyclk);
-
-	/* Enable normal mode of operation */
-	phyotg &= ~(OTG_SYS_FORCESUSPEND |
-			OTG_SYS_SIDDQ_UOTG |
-			OTG_SYS_FORCESLEEP |
-			OTG_SYS_REFCLKSEL_MASK |
-			/* COMMON Block configuration during suspend */
-			OTG_SYS_COMMON_ON);
-
-	/* OTG phy & link reset */
-	phyotg |= (OTG_SYS_PHY0_SWRST |
-			OTG_SYS_LINKSWRST_UOTG |
-			OTG_SYS_PHYLINK_SWRESET |
-			OTG_SYS_OTGDISABLE |
-			/* Set phy refclk */
-			OTG_SYS_REFCLKSEL_CLKCORE);
-
-	writel(phyotg, regs + EXYNOS5_PHY_OTG_SYS);
-	udelay(10);
-	phyotg &= ~(OTG_SYS_PHY0_SWRST |
-			OTG_SYS_LINKSWRST_UOTG |
-			OTG_SYS_PHYLINK_SWRESET);
-	writel(phyotg, regs + EXYNOS5_PHY_OTG_SYS);
-
-	/* HSIC phy configuration */
-	phyhsic = (HSIC_CTRL_REFCLKDIV_12 |
-			HSIC_CTRL_REFCLKSEL |
-			HSIC_CTRL_PHYSWRST);
-	writel(phyhsic, regs + EXYNOS5_PHY_HSIC_CTRL1);
-	writel(phyhsic, regs + EXYNOS5_PHY_HSIC_CTRL2);
-	udelay(10);
-	phyhsic &= ~HSIC_CTRL_PHYSWRST;
-	writel(phyhsic, regs + EXYNOS5_PHY_HSIC_CTRL1);
-	writel(phyhsic, regs + EXYNOS5_PHY_HSIC_CTRL2);
-
-	udelay(80);
-
-	/* enable EHCI DMA burst */
-	ehcictrl = readl(regs + EXYNOS5_PHY_HOST_EHCICTRL);
-	ehcictrl |= (HOST_EHCICTRL_ENAINCRXALIGN |
-				HOST_EHCICTRL_ENAINCR4 |
-				HOST_EHCICTRL_ENAINCR8 |
-				HOST_EHCICTRL_ENAINCR16);
-	writel(ehcictrl, regs + EXYNOS5_PHY_HOST_EHCICTRL);
-
-	/* set ohci_suspend_on_n */
-	ohcictrl = readl(regs + EXYNOS5_PHY_HOST_OHCICTRL);
-	ohcictrl |= HOST_OHCICTRL_SUSPLGCY;
-	writel(ohcictrl, regs + EXYNOS5_PHY_HOST_OHCICTRL);
-}
-
-static void samsung_usb2phy_enable(struct samsung_usbphy *sphy)
-{
-	void __iomem *regs = sphy->regs;
-	u32 phypwr;
-	u32 phyclk;
-	u32 rstcon;
-
-	/* set clock frequency for PLL */
-	phyclk = sphy->ref_clk_freq;
-	phypwr = readl(regs + SAMSUNG_PHYPWR);
-	rstcon = readl(regs + SAMSUNG_RSTCON);
-
-	switch (sphy->drv_data->cpu_type) {
-	case TYPE_S3C64XX:
-		phyclk &= ~PHYCLK_COMMON_ON_N;
-		phypwr &= ~PHYPWR_NORMAL_MASK;
-		rstcon |= RSTCON_SWRST;
-		break;
-	case TYPE_EXYNOS4X12:
-		phypwr &= ~(PHYPWR_NORMAL_MASK_HSIC0 |
-				PHYPWR_NORMAL_MASK_HSIC1 |
-				PHYPWR_NORMAL_MASK_PHY1);
-		rstcon |= RSTCON_HOSTPHY_SWRST;
-	case TYPE_EXYNOS4210:
-		phypwr &= ~PHYPWR_NORMAL_MASK_PHY0;
-		rstcon |= RSTCON_SWRST;
-	default:
-		break;
-	}
-
-	writel(phyclk, regs + SAMSUNG_PHYCLK);
-	/* Configure PHY0 for normal operation*/
-	writel(phypwr, regs + SAMSUNG_PHYPWR);
-	/* reset all ports of PHY and Link */
-	writel(rstcon, regs + SAMSUNG_RSTCON);
-	udelay(10);
-	if (sphy->drv_data->cpu_type == TYPE_EXYNOS4X12)
-		rstcon &= ~RSTCON_HOSTPHY_SWRST;
-	rstcon &= ~RSTCON_SWRST;
-	writel(rstcon, regs + SAMSUNG_RSTCON);
-}
-
-static void samsung_exynos5_usb2phy_disable(struct samsung_usbphy *sphy)
-{
-	void __iomem *regs = sphy->regs;
-	u32 phyhost;
-	u32 phyotg;
-	u32 phyhsic;
-
-	if (atomic_dec_return(&sphy->phy_usage) > 0) {
-		dev_info(sphy->dev, "still being used\n");
-		return;
-	}
-
-	phyhsic = (HSIC_CTRL_REFCLKDIV_12 |
-			HSIC_CTRL_REFCLKSEL |
-			HSIC_CTRL_SIDDQ |
-			HSIC_CTRL_FORCESLEEP |
-			HSIC_CTRL_FORCESUSPEND);
-	writel(phyhsic, regs + EXYNOS5_PHY_HSIC_CTRL1);
-	writel(phyhsic, regs + EXYNOS5_PHY_HSIC_CTRL2);
-
-	phyhost = readl(regs + EXYNOS5_PHY_HOST_CTRL0);
-	phyhost |= (HOST_CTRL0_SIDDQ |
-			HOST_CTRL0_FORCESUSPEND |
-			HOST_CTRL0_FORCESLEEP |
-			HOST_CTRL0_PHYSWRST |
-			HOST_CTRL0_PHYSWRSTALL);
-	writel(phyhost, regs + EXYNOS5_PHY_HOST_CTRL0);
-
-	phyotg = readl(regs + EXYNOS5_PHY_OTG_SYS);
-	phyotg |= (OTG_SYS_FORCESUSPEND |
-			OTG_SYS_SIDDQ_UOTG |
-			OTG_SYS_FORCESLEEP);
-	writel(phyotg, regs + EXYNOS5_PHY_OTG_SYS);
-}
-
-static void samsung_usb2phy_disable(struct samsung_usbphy *sphy)
-{
-	void __iomem *regs = sphy->regs;
-	u32 phypwr;
-
-	phypwr = readl(regs + SAMSUNG_PHYPWR);
-
-	switch (sphy->drv_data->cpu_type) {
-	case TYPE_S3C64XX:
-		phypwr |= PHYPWR_NORMAL_MASK;
-		break;
-	case TYPE_EXYNOS4X12:
-		phypwr |= (PHYPWR_NORMAL_MASK_HSIC0 |
-				PHYPWR_NORMAL_MASK_HSIC1 |
-				PHYPWR_NORMAL_MASK_PHY1);
-	case TYPE_EXYNOS4210:
-		phypwr |= PHYPWR_NORMAL_MASK_PHY0;
-	default:
-		break;
-	}
-
-	/* Disable analog and otg block power */
-	writel(phypwr, regs + SAMSUNG_PHYPWR);
-}
-
-/*
- * The function passed to the usb driver for phy initialization
- */
-static int samsung_usb2phy_init(struct usb_phy *phy)
-{
-	struct samsung_usbphy *sphy;
-	struct usb_bus *host = NULL;
-	unsigned long flags;
-	int ret = 0;
-
-	sphy = phy_to_sphy(phy);
-
-	host = phy->otg->host;
-
-	/* Enable the phy clock */
-	ret = clk_prepare_enable(sphy->clk);
-	if (ret) {
-		dev_err(sphy->dev, "%s: clk_prepare_enable failed\n", __func__);
-		return ret;
-	}
-
-	spin_lock_irqsave(&sphy->lock, flags);
-
-	if (host) {
-		/* setting default phy-type for USB 2.0 */
-		if (!strstr(dev_name(host->controller), "ehci") ||
-				!strstr(dev_name(host->controller), "ohci"))
-			samsung_usbphy_set_type(&sphy->phy, USB_PHY_TYPE_HOST);
-	} else {
-		samsung_usbphy_set_type(&sphy->phy, USB_PHY_TYPE_DEVICE);
-	}
-
-	/* Disable phy isolation */
-	if (sphy->plat && sphy->plat->pmu_isolation)
-		sphy->plat->pmu_isolation(false);
-	else if (sphy->drv_data->set_isolation)
-		sphy->drv_data->set_isolation(sphy, false);
-
-	/* Selecting Host/OTG mode; After reset USB2.0PHY_CFG: HOST */
-	samsung_usbphy_cfg_sel(sphy);
-
-	/* Initialize usb phy registers */
-	sphy->drv_data->phy_enable(sphy);
-
-	spin_unlock_irqrestore(&sphy->lock, flags);
-
-	/* Disable the phy clock */
-	clk_disable_unprepare(sphy->clk);
-
-	return ret;
-}
-
-/*
- * The function passed to the usb driver for phy shutdown
- */
-static void samsung_usb2phy_shutdown(struct usb_phy *phy)
-{
-	struct samsung_usbphy *sphy;
-	struct usb_bus *host = NULL;
-	unsigned long flags;
-
-	sphy = phy_to_sphy(phy);
-
-	host = phy->otg->host;
-
-	if (clk_prepare_enable(sphy->clk)) {
-		dev_err(sphy->dev, "%s: clk_prepare_enable failed\n", __func__);
-		return;
-	}
-
-	spin_lock_irqsave(&sphy->lock, flags);
-
-	if (host) {
-		/* setting default phy-type for USB 2.0 */
-		if (!strstr(dev_name(host->controller), "ehci") ||
-				!strstr(dev_name(host->controller), "ohci"))
-			samsung_usbphy_set_type(&sphy->phy, USB_PHY_TYPE_HOST);
-	} else {
-		samsung_usbphy_set_type(&sphy->phy, USB_PHY_TYPE_DEVICE);
-	}
-
-	/* De-initialize usb phy registers */
-	sphy->drv_data->phy_disable(sphy);
-
-	/* Enable phy isolation */
-	if (sphy->plat && sphy->plat->pmu_isolation)
-		sphy->plat->pmu_isolation(true);
-	else if (sphy->drv_data->set_isolation)
-		sphy->drv_data->set_isolation(sphy, true);
-
-	spin_unlock_irqrestore(&sphy->lock, flags);
-
-	clk_disable_unprepare(sphy->clk);
-}
-
-static int samsung_usb2phy_probe(struct platform_device *pdev)
-{
-	struct samsung_usbphy *sphy;
-	struct usb_otg *otg;
-	struct samsung_usbphy_data *pdata = dev_get_platdata(&pdev->dev);
-	const struct samsung_usbphy_drvdata *drv_data;
-	struct device *dev = &pdev->dev;
-	struct resource *phy_mem;
-	void __iomem	*phy_base;
-	struct clk *clk;
-	int ret;
-
-	phy_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	phy_base = devm_ioremap_resource(dev, phy_mem);
-	if (IS_ERR(phy_base))
-		return PTR_ERR(phy_base);
-
-	sphy = devm_kzalloc(dev, sizeof(*sphy), GFP_KERNEL);
-	if (!sphy)
-		return -ENOMEM;
-
-	otg = devm_kzalloc(dev, sizeof(*otg), GFP_KERNEL);
-	if (!otg)
-		return -ENOMEM;
-
-	drv_data = samsung_usbphy_get_driver_data(pdev);
-
-	if (drv_data->cpu_type == TYPE_EXYNOS5250)
-		clk = devm_clk_get(dev, "usbhost");
-	else
-		clk = devm_clk_get(dev, "otg");
-
-	if (IS_ERR(clk)) {
-		dev_err(dev, "Failed to get usbhost/otg clock\n");
-		return PTR_ERR(clk);
-	}
-
-	sphy->dev = dev;
-
-	if (dev->of_node) {
-		ret = samsung_usbphy_parse_dt(sphy);
-		if (ret < 0)
-			return ret;
-	} else {
-		if (!pdata) {
-			dev_err(dev, "no platform data specified\n");
-			return -EINVAL;
-		}
-	}
-
-	sphy->plat		= pdata;
-	sphy->regs		= phy_base;
-	sphy->clk		= clk;
-	sphy->drv_data		= drv_data;
-	sphy->phy.dev		= sphy->dev;
-	sphy->phy.label		= "samsung-usb2phy";
-	sphy->phy.type		= USB_PHY_TYPE_USB2;
-	sphy->phy.init		= samsung_usb2phy_init;
-	sphy->phy.shutdown	= samsung_usb2phy_shutdown;
-
-	sphy->ref_clk_freq = samsung_usbphy_get_refclk_freq(sphy);
-	if (sphy->ref_clk_freq < 0)
-		return -EINVAL;
-
-	sphy->phy.otg		= otg;
-	sphy->phy.otg->phy	= &sphy->phy;
-	sphy->phy.otg->set_host = samsung_usbphy_set_host;
-
-	spin_lock_init(&sphy->lock);
-
-	platform_set_drvdata(pdev, sphy);
-
-	return usb_add_phy_dev(&sphy->phy);
-}
-
-static int samsung_usb2phy_remove(struct platform_device *pdev)
-{
-	struct samsung_usbphy *sphy = platform_get_drvdata(pdev);
-
-	usb_remove_phy(&sphy->phy);
-
-	if (sphy->pmuregs)
-		iounmap(sphy->pmuregs);
-	if (sphy->sysreg)
-		iounmap(sphy->sysreg);
-
-	return 0;
-}
-
-static const struct samsung_usbphy_drvdata usb2phy_s3c64xx = {
-	.cpu_type		= TYPE_S3C64XX,
-	.devphy_en_mask		= S3C64XX_USBPHY_ENABLE,
-	.rate_to_clksel		= samsung_usbphy_rate_to_clksel_64xx,
-	.set_isolation		= NULL, /* TODO */
-	.phy_enable		= samsung_usb2phy_enable,
-	.phy_disable		= samsung_usb2phy_disable,
-};
-
-static const struct samsung_usbphy_drvdata usb2phy_exynos4 = {
-	.cpu_type		= TYPE_EXYNOS4210,
-	.devphy_en_mask		= EXYNOS_USBPHY_ENABLE,
-	.hostphy_en_mask	= EXYNOS_USBPHY_ENABLE,
-	.rate_to_clksel		= samsung_usbphy_rate_to_clksel_64xx,
-	.set_isolation		= samsung_usbphy_set_isolation_4210,
-	.phy_enable		= samsung_usb2phy_enable,
-	.phy_disable		= samsung_usb2phy_disable,
-};
-
-static const struct samsung_usbphy_drvdata usb2phy_exynos4x12 = {
-	.cpu_type		= TYPE_EXYNOS4X12,
-	.devphy_en_mask		= EXYNOS_USBPHY_ENABLE,
-	.hostphy_en_mask	= EXYNOS_USBPHY_ENABLE,
-	.rate_to_clksel		= samsung_usbphy_rate_to_clksel_4x12,
-	.set_isolation		= samsung_usbphy_set_isolation_4210,
-	.phy_enable		= samsung_usb2phy_enable,
-	.phy_disable		= samsung_usb2phy_disable,
-};
-
-static struct samsung_usbphy_drvdata usb2phy_exynos5 = {
-	.cpu_type		= TYPE_EXYNOS5250,
-	.hostphy_en_mask	= EXYNOS_USBPHY_ENABLE,
-	.hostphy_reg_offset	= EXYNOS_USBHOST_PHY_CTRL_OFFSET,
-	.rate_to_clksel		= samsung_usbphy_rate_to_clksel_4x12,
-	.set_isolation		= samsung_usbphy_set_isolation_4210,
-	.phy_enable		= samsung_exynos5_usb2phy_enable,
-	.phy_disable		= samsung_exynos5_usb2phy_disable,
-};
-
-#ifdef CONFIG_OF
-static const struct of_device_id samsung_usbphy_dt_match[] = {
-	{
-		.compatible = "samsung,s3c64xx-usb2phy",
-		.data = &usb2phy_s3c64xx,
-	}, {
-		.compatible = "samsung,exynos4210-usb2phy",
-		.data = &usb2phy_exynos4,
-	}, {
-		.compatible = "samsung,exynos4x12-usb2phy",
-		.data = &usb2phy_exynos4x12,
-	}, {
-		.compatible = "samsung,exynos5250-usb2phy",
-		.data = &usb2phy_exynos5
-	},
-	{},
-};
-MODULE_DEVICE_TABLE(of, samsung_usbphy_dt_match);
-#endif
-
-static struct platform_device_id samsung_usbphy_driver_ids[] = {
-	{
-		.name		= "s3c64xx-usb2phy",
-		.driver_data	= (unsigned long)&usb2phy_s3c64xx,
-	}, {
-		.name		= "exynos4210-usb2phy",
-		.driver_data	= (unsigned long)&usb2phy_exynos4,
-	}, {
-		.name		= "exynos4x12-usb2phy",
-		.driver_data	= (unsigned long)&usb2phy_exynos4x12,
-	}, {
-		.name		= "exynos5250-usb2phy",
-		.driver_data	= (unsigned long)&usb2phy_exynos5,
-	},
-	{},
-};
-
-MODULE_DEVICE_TABLE(platform, samsung_usbphy_driver_ids);
-
-static struct platform_driver samsung_usb2phy_driver = {
-	.probe		= samsung_usb2phy_probe,
-	.remove		= samsung_usb2phy_remove,
-	.id_table	= samsung_usbphy_driver_ids,
-	.driver		= {
-		.name	= "samsung-usb2phy",
-		.owner	= THIS_MODULE,
-		.of_match_table = of_match_ptr(samsung_usbphy_dt_match),
-	},
-};
-
-module_platform_driver(samsung_usb2phy_driver);
-
-MODULE_DESCRIPTION("Samsung USB 2.0 phy controller");
-MODULE_AUTHOR("Praveen Paneri <p.paneri@samsung.com>");
-MODULE_LICENSE("GPL");
-MODULE_ALIAS("platform:samsung-usb2phy");
diff --git a/drivers/usb/phy/phy-samsung-usb3.c b/drivers/usb/phy/phy-samsung-usb3.c
deleted file mode 100644
index cc0819248acf..000000000000
--- a/drivers/usb/phy/phy-samsung-usb3.c
+++ /dev/null
@@ -1,350 +0,0 @@
-/* linux/drivers/usb/phy/phy-samsung-usb3.c
- *
- * Copyright (c) 2013 Samsung Electronics Co., Ltd.
- *              http://www.samsung.com
- *
- * Author: Vivek Gautam <gautam.vivek@samsung.com>
- *
- * Samsung USB 3.0 PHY transceiver; talks to DWC3 controller.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/clk.h>
-#include <linux/delay.h>
-#include <linux/err.h>
-#include <linux/io.h>
-#include <linux/of.h>
-#include <linux/usb/samsung_usb_phy.h>
-#include <linux/platform_data/samsung-usbphy.h>
-
-#include "phy-samsung-usb.h"
-
-/*
- * Sets the phy clk as EXTREFCLK (XXTI) which is internal clock from clock core.
- */
-static u32 samsung_usb3phy_set_refclk(struct samsung_usbphy *sphy)
-{
-	u32 reg;
-	u32 refclk;
-
-	refclk = sphy->ref_clk_freq;
-
-	reg = PHYCLKRST_REFCLKSEL_EXT_REFCLK |
-		PHYCLKRST_FSEL(refclk);
-
-	switch (refclk) {
-	case FSEL_CLKSEL_50M:
-		reg |= (PHYCLKRST_MPLL_MULTIPLIER_50M_REF |
-			PHYCLKRST_SSC_REFCLKSEL(0x00));
-		break;
-	case FSEL_CLKSEL_20M:
-		reg |= (PHYCLKRST_MPLL_MULTIPLIER_20MHZ_REF |
-			PHYCLKRST_SSC_REFCLKSEL(0x00));
-		break;
-	case FSEL_CLKSEL_19200K:
-		reg |= (PHYCLKRST_MPLL_MULTIPLIER_19200KHZ_REF |
-			PHYCLKRST_SSC_REFCLKSEL(0x88));
-		break;
-	case FSEL_CLKSEL_24M:
-	default:
-		reg |= (PHYCLKRST_MPLL_MULTIPLIER_24MHZ_REF |
-			PHYCLKRST_SSC_REFCLKSEL(0x88));
-		break;
-	}
-
-	return reg;
-}
-
-static void samsung_exynos5_usb3phy_enable(struct samsung_usbphy *sphy)
-{
-	void __iomem *regs = sphy->regs;
-	u32 phyparam0;
-	u32 phyparam1;
-	u32 linksystem;
-	u32 phybatchg;
-	u32 phytest;
-	u32 phyclkrst;
-
-	/* Reset USB 3.0 PHY */
-	writel(0x0, regs + EXYNOS5_DRD_PHYREG0);
-
-	phyparam0 = readl(regs + EXYNOS5_DRD_PHYPARAM0);
-	/* Select PHY CLK source */
-	phyparam0 &= ~PHYPARAM0_REF_USE_PAD;
-	/* Set Loss-of-Signal Detector sensitivity */
-	phyparam0 &= ~PHYPARAM0_REF_LOSLEVEL_MASK;
-	phyparam0 |= PHYPARAM0_REF_LOSLEVEL;
-	writel(phyparam0, regs + EXYNOS5_DRD_PHYPARAM0);
-
-	writel(0x0, regs + EXYNOS5_DRD_PHYRESUME);
-
-	/*
-	 * Setting the Frame length Adj value[6:1] to default 0x20
-	 * See xHCI 1.0 spec, 5.2.4
-	 */
-	linksystem = LINKSYSTEM_XHCI_VERSION_CONTROL |
-			LINKSYSTEM_FLADJ(0x20);
-	writel(linksystem, regs + EXYNOS5_DRD_LINKSYSTEM);
-
-	phyparam1 = readl(regs + EXYNOS5_DRD_PHYPARAM1);
-	/* Set Tx De-Emphasis level */
-	phyparam1 &= ~PHYPARAM1_PCS_TXDEEMPH_MASK;
-	phyparam1 |= PHYPARAM1_PCS_TXDEEMPH;
-	writel(phyparam1, regs + EXYNOS5_DRD_PHYPARAM1);
-
-	phybatchg = readl(regs + EXYNOS5_DRD_PHYBATCHG);
-	phybatchg |= PHYBATCHG_UTMI_CLKSEL;
-	writel(phybatchg, regs + EXYNOS5_DRD_PHYBATCHG);
-
-	/* PHYTEST POWERDOWN Control */
-	phytest = readl(regs + EXYNOS5_DRD_PHYTEST);
-	phytest &= ~(PHYTEST_POWERDOWN_SSP |
-			PHYTEST_POWERDOWN_HSP);
-	writel(phytest, regs + EXYNOS5_DRD_PHYTEST);
-
-	/* UTMI Power Control */
-	writel(PHYUTMI_OTGDISABLE, regs + EXYNOS5_DRD_PHYUTMI);
-
-	phyclkrst = samsung_usb3phy_set_refclk(sphy);
-
-	phyclkrst |= PHYCLKRST_PORTRESET |
-			/* Digital power supply in normal operating mode */
-			PHYCLKRST_RETENABLEN |
-			/* Enable ref clock for SS function */
-			PHYCLKRST_REF_SSP_EN |
-			/* Enable spread spectrum */
-			PHYCLKRST_SSC_EN |
-			/* Power down HS Bias and PLL blocks in suspend mode */
-			PHYCLKRST_COMMONONN;
-
-	writel(phyclkrst, regs + EXYNOS5_DRD_PHYCLKRST);
-
-	udelay(10);
-
-	phyclkrst &= ~(PHYCLKRST_PORTRESET);
-	writel(phyclkrst, regs + EXYNOS5_DRD_PHYCLKRST);
-}
-
-static void samsung_exynos5_usb3phy_disable(struct samsung_usbphy *sphy)
-{
-	u32 phyutmi;
-	u32 phyclkrst;
-	u32 phytest;
-	void __iomem *regs = sphy->regs;
-
-	phyutmi = PHYUTMI_OTGDISABLE |
-			PHYUTMI_FORCESUSPEND |
-			PHYUTMI_FORCESLEEP;
-	writel(phyutmi, regs + EXYNOS5_DRD_PHYUTMI);
-
-	/* Resetting the PHYCLKRST enable bits to reduce leakage current */
-	phyclkrst = readl(regs + EXYNOS5_DRD_PHYCLKRST);
-	phyclkrst &= ~(PHYCLKRST_REF_SSP_EN |
-			PHYCLKRST_SSC_EN |
-			PHYCLKRST_COMMONONN);
-	writel(phyclkrst, regs + EXYNOS5_DRD_PHYCLKRST);
-
-	/* Control PHYTEST to remove leakage current */
-	phytest = readl(regs + EXYNOS5_DRD_PHYTEST);
-	phytest |= (PHYTEST_POWERDOWN_SSP |
-			PHYTEST_POWERDOWN_HSP);
-	writel(phytest, regs + EXYNOS5_DRD_PHYTEST);
-}
-
-static int samsung_usb3phy_init(struct usb_phy *phy)
-{
-	struct samsung_usbphy *sphy;
-	unsigned long flags;
-	int ret = 0;
-
-	sphy = phy_to_sphy(phy);
-
-	/* Enable the phy clock */
-	ret = clk_prepare_enable(sphy->clk);
-	if (ret) {
-		dev_err(sphy->dev, "%s: clk_prepare_enable failed\n", __func__);
-		return ret;
-	}
-
-	spin_lock_irqsave(&sphy->lock, flags);
-
-	/* setting default phy-type for USB 3.0 */
-	samsung_usbphy_set_type(&sphy->phy, USB_PHY_TYPE_DEVICE);
-
-	/* Disable phy isolation */
-	if (sphy->drv_data->set_isolation)
-		sphy->drv_data->set_isolation(sphy, false);
-
-	/* Initialize usb phy registers */
-	sphy->drv_data->phy_enable(sphy);
-
-	spin_unlock_irqrestore(&sphy->lock, flags);
-
-	/* Disable the phy clock */
-	clk_disable_unprepare(sphy->clk);
-
-	return ret;
-}
-
-/*
- * The function passed to the usb driver for phy shutdown
- */
-static void samsung_usb3phy_shutdown(struct usb_phy *phy)
-{
-	struct samsung_usbphy *sphy;
-	unsigned long flags;
-
-	sphy = phy_to_sphy(phy);
-
-	if (clk_prepare_enable(sphy->clk)) {
-		dev_err(sphy->dev, "%s: clk_prepare_enable failed\n", __func__);
-		return;
-	}
-
-	spin_lock_irqsave(&sphy->lock, flags);
-
-	/* setting default phy-type for USB 3.0 */
-	samsung_usbphy_set_type(&sphy->phy, USB_PHY_TYPE_DEVICE);
-
-	/* De-initialize usb phy registers */
-	sphy->drv_data->phy_disable(sphy);
-
-	/* Enable phy isolation */
-	if (sphy->drv_data->set_isolation)
-		sphy->drv_data->set_isolation(sphy, true);
-
-	spin_unlock_irqrestore(&sphy->lock, flags);
-
-	clk_disable_unprepare(sphy->clk);
-}
-
-static int samsung_usb3phy_probe(struct platform_device *pdev)
-{
-	struct samsung_usbphy *sphy;
-	struct samsung_usbphy_data *pdata = dev_get_platdata(&pdev->dev);
-	struct device *dev = &pdev->dev;
-	struct resource *phy_mem;
-	void __iomem	*phy_base;
-	struct clk *clk;
-	int ret;
-
-	phy_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	phy_base = devm_ioremap_resource(dev, phy_mem);
-	if (IS_ERR(phy_base))
-		return PTR_ERR(phy_base);
-
-	sphy = devm_kzalloc(dev, sizeof(*sphy), GFP_KERNEL);
-	if (!sphy)
-		return -ENOMEM;
-
-	clk = devm_clk_get(dev, "usbdrd30");
-	if (IS_ERR(clk)) {
-		dev_err(dev, "Failed to get device clock\n");
-		return PTR_ERR(clk);
-	}
-
-	sphy->dev = dev;
-
-	if (dev->of_node) {
-		ret = samsung_usbphy_parse_dt(sphy);
-		if (ret < 0)
-			return ret;
-	} else {
-		if (!pdata) {
-			dev_err(dev, "no platform data specified\n");
-			return -EINVAL;
-		}
-	}
-
-	sphy->plat		= pdata;
-	sphy->regs		= phy_base;
-	sphy->clk		= clk;
-	sphy->phy.dev		= sphy->dev;
-	sphy->phy.label		= "samsung-usb3phy";
-	sphy->phy.type		= USB_PHY_TYPE_USB3;
-	sphy->phy.init		= samsung_usb3phy_init;
-	sphy->phy.shutdown	= samsung_usb3phy_shutdown;
-	sphy->drv_data		= samsung_usbphy_get_driver_data(pdev);
-
-	sphy->ref_clk_freq = samsung_usbphy_get_refclk_freq(sphy);
-	if (sphy->ref_clk_freq < 0)
-		return -EINVAL;
-
-	spin_lock_init(&sphy->lock);
-
-	platform_set_drvdata(pdev, sphy);
-
-	return usb_add_phy_dev(&sphy->phy);
-}
-
-static int samsung_usb3phy_remove(struct platform_device *pdev)
-{
-	struct samsung_usbphy *sphy = platform_get_drvdata(pdev);
-
-	usb_remove_phy(&sphy->phy);
-
-	if (sphy->pmuregs)
-		iounmap(sphy->pmuregs);
-	if (sphy->sysreg)
-		iounmap(sphy->sysreg);
-
-	return 0;
-}
-
-static struct samsung_usbphy_drvdata usb3phy_exynos5 = {
-	.cpu_type		= TYPE_EXYNOS5250,
-	.devphy_en_mask		= EXYNOS_USBPHY_ENABLE,
-	.rate_to_clksel		= samsung_usbphy_rate_to_clksel_4x12,
-	.set_isolation		= samsung_usbphy_set_isolation_4210,
-	.phy_enable		= samsung_exynos5_usb3phy_enable,
-	.phy_disable		= samsung_exynos5_usb3phy_disable,
-};
-
-#ifdef CONFIG_OF
-static const struct of_device_id samsung_usbphy_dt_match[] = {
-	{
-		.compatible = "samsung,exynos5250-usb3phy",
-		.data = &usb3phy_exynos5
-	},
-	{},
-};
-MODULE_DEVICE_TABLE(of, samsung_usbphy_dt_match);
-#endif
-
-static struct platform_device_id samsung_usbphy_driver_ids[] = {
-	{
-		.name		= "exynos5250-usb3phy",
-		.driver_data	= (unsigned long)&usb3phy_exynos5,
-	},
-	{},
-};
-
-MODULE_DEVICE_TABLE(platform, samsung_usbphy_driver_ids);
-
-static struct platform_driver samsung_usb3phy_driver = {
-	.probe		= samsung_usb3phy_probe,
-	.remove		= samsung_usb3phy_remove,
-	.id_table	= samsung_usbphy_driver_ids,
-	.driver		= {
-		.name	= "samsung-usb3phy",
-		.owner	= THIS_MODULE,
-		.of_match_table = of_match_ptr(samsung_usbphy_dt_match),
-	},
-};
-
-module_platform_driver(samsung_usb3phy_driver);
-
-MODULE_DESCRIPTION("Samsung USB 3.0 phy controller");
-MODULE_AUTHOR("Vivek Gautam <gautam.vivek@samsung.com>");
-MODULE_LICENSE("GPL");
-MODULE_ALIAS("platform:samsung-usb3phy");
diff --git a/drivers/usb/phy/phy-twl6030-usb.c b/drivers/usb/phy/phy-twl6030-usb.c
index 04778cf80d60..44ea082e40dc 100644
--- a/drivers/usb/phy/phy-twl6030-usb.c
+++ b/drivers/usb/phy/phy-twl6030-usb.c
@@ -104,7 +104,6 @@ struct twl6030_usb {
 	int			irq2;
 	enum omap_musb_vbus_id_status linkstat;
 	u8			asleep;
-	bool			irq_enabled;
 	bool			vbus_enable;
 	const char		*regulator;
 };
@@ -373,7 +372,6 @@ static int twl6030_usb_probe(struct platform_device *pdev)
 
 	INIT_WORK(&twl->set_vbus_work, otg_set_vbus_work);
 
-	twl->irq_enabled = true;
 	status = request_threaded_irq(twl->irq1, NULL, twl6030_usbotg_irq,
 			IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING | IRQF_ONESHOT,
 			"twl6030_usb", twl);
diff --git a/drivers/usb/renesas_usbhs/Kconfig b/drivers/usb/renesas_usbhs/Kconfig
index 1c4195abc108..de83b9d0cd5c 100644
--- a/drivers/usb/renesas_usbhs/Kconfig
+++ b/drivers/usb/renesas_usbhs/Kconfig
@@ -5,6 +5,7 @@
 config USB_RENESAS_USBHS
 	tristate 'Renesas USBHS controller'
 	depends on USB_GADGET
+	depends on ARCH_SHMOBILE || SUPERH || COMPILE_TEST
 	default n
 	help
 	  Renesas USBHS is a discrete USB host and peripheral controller chip
diff --git a/drivers/usb/renesas_usbhs/common.c b/drivers/usb/renesas_usbhs/common.c
index 1b9bf8d83235..b3b6813ab270 100644
--- a/drivers/usb/renesas_usbhs/common.c
+++ b/drivers/usb/renesas_usbhs/common.c
@@ -18,6 +18,8 @@
 #include <linux/gpio.h>
 #include <linux/io.h>
 #include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/of_gpio.h>
 #include <linux/pm_runtime.h>
 #include <linux/slab.h>
 #include <linux/sysfs.h>
@@ -438,6 +440,43 @@ static int usbhsc_drvcllbck_notify_hotplug(struct platform_device *pdev)
 /*
  *		platform functions
  */
+static const struct of_device_id usbhs_of_match[] = {
+	{
+		.compatible = "renesas,usbhs-r8a7790",
+		.data = (void *)USBHS_TYPE_R8A7790,
+	},
+	{
+		.compatible = "renesas,usbhs-r8a7791",
+		.data = (void *)USBHS_TYPE_R8A7791,
+	},
+	{ },
+};
+MODULE_DEVICE_TABLE(of, usbhs_of_match);
+
+static struct renesas_usbhs_platform_info *usbhs_parse_dt(struct device *dev)
+{
+	struct renesas_usbhs_platform_info *info;
+	struct renesas_usbhs_driver_param *dparam;
+	const struct of_device_id *of_id = of_match_device(usbhs_of_match, dev);
+	u32 tmp;
+	int gpio;
+
+	info = devm_kzalloc(dev, sizeof(*info), GFP_KERNEL);
+	if (!info)
+		return NULL;
+
+	dparam = &info->driver_param;
+	dparam->type = of_id ? (u32)of_id->data : 0;
+	if (!of_property_read_u32(dev->of_node, "renesas,buswait", &tmp))
+		dparam->buswait_bwait = tmp;
+	gpio = of_get_named_gpio_flags(dev->of_node, "renesas,enable-gpio", 0,
+				       NULL);
+	if (gpio > 0)
+		dparam->enable_gpio = gpio;
+
+	return info;
+}
+
 static int usbhs_probe(struct platform_device *pdev)
 {
 	struct renesas_usbhs_platform_info *info = dev_get_platdata(&pdev->dev);
@@ -446,6 +485,10 @@ static int usbhs_probe(struct platform_device *pdev)
 	struct resource *res, *irq_res;
 	int ret;
 
+	/* check device node */
+	if (pdev->dev.of_node)
+		info = pdev->dev.platform_data = usbhs_parse_dt(&pdev->dev);
+
 	/* check platform information */
 	if (!info) {
 		dev_err(&pdev->dev, "no platform information\n");
@@ -689,6 +732,7 @@ static struct platform_driver renesas_usbhs_driver = {
 	.driver		= {
 		.name	= "renesas_usbhs",
 		.pm	= &usbhsc_pm_ops,
+		.of_match_table = of_match_ptr(usbhs_of_match),
 	},
 	.probe		= usbhs_probe,
 	.remove		= usbhs_remove,
diff --git a/drivers/usb/renesas_usbhs/mod_gadget.c b/drivers/usb/renesas_usbhs/mod_gadget.c
index 04e6505777d0..2d17c10a0428 100644
--- a/drivers/usb/renesas_usbhs/mod_gadget.c
+++ b/drivers/usb/renesas_usbhs/mod_gadget.c
@@ -129,7 +129,7 @@ static void usbhsg_queue_pop(struct usbhsg_uep *uep,
 	dev_dbg(dev, "pipe %d : queue pop\n", usbhs_pipe_number(pipe));
 
 	ureq->req.status = status;
-	ureq->req.complete(&uep->ep, &ureq->req);
+	usb_gadget_giveback_request(&uep->ep, &ureq->req);
 }
 
 static void usbhsg_queue_done(struct usbhs_priv *priv, struct usbhs_pkt *pkt)
diff --git a/drivers/usb/serial/Kconfig b/drivers/usb/serial/Kconfig
index 3ce5c74b29e4..a69f7cd9d0bf 100644
--- a/drivers/usb/serial/Kconfig
+++ b/drivers/usb/serial/Kconfig
@@ -58,9 +58,11 @@ config USB_SERIAL_SIMPLE
 	  handles a wide range of very simple devices, all in one
 	  driver.  Specifically, it supports:
 		- Suunto ANT+ USB device.
+		- Medtronic CareLink USB device
 		- Fundamental Software dongle.
 		- HP4x calculators
 		- a number of Motorola phones
+		- Novatel Wireless GPS receivers
 		- Siemens USB/MPI adapter.
 		- ViVOtech ViVOpay USB device.
 		- Infineon Modem Flashloader USB interface
@@ -682,14 +684,6 @@ config USB_SERIAL_WISHBONE
 	  To compile this driver as a module, choose M here: the
 	  module will be called wishbone-serial.
 
-config USB_SERIAL_ZTE
-	tristate "ZTE USB serial driver"
-	help
-	  Say Y here if you want to use a ZTE USB to serial device.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called zte.
-
 config USB_SERIAL_SSU100
 	tristate "USB Quatech SSU-100 Single Port Serial Driver"
 	help
diff --git a/drivers/usb/serial/Makefile b/drivers/usb/serial/Makefile
index bfdafd349441..349d9df0895f 100644
--- a/drivers/usb/serial/Makefile
+++ b/drivers/usb/serial/Makefile
@@ -60,4 +60,3 @@ obj-$(CONFIG_USB_SERIAL_WISHBONE)		+= wishbone-serial.o
 obj-$(CONFIG_USB_SERIAL_WHITEHEAT)		+= whiteheat.o
 obj-$(CONFIG_USB_SERIAL_XIRCOM)			+= keyspan_pda.o
 obj-$(CONFIG_USB_SERIAL_XSENS_MT)		+= xsens_mt.o
-obj-$(CONFIG_USB_SERIAL_ZTE)			+= zte_ev.o
diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c
index e4bb62225cb9..eca1747ca8c7 100644
--- a/drivers/usb/serial/cp210x.c
+++ b/drivers/usb/serial/cp210x.c
@@ -122,6 +122,7 @@ static const struct usb_device_id id_table[] = {
 	{ USB_DEVICE(0x10C4, 0x8665) }, /* AC-Services OBD-IF */
 	{ USB_DEVICE(0x10C4, 0x88A4) }, /* MMB Networks ZigBee USB Device */
 	{ USB_DEVICE(0x10C4, 0x88A5) }, /* Planet Innovation Ingeni ZigBee USB Device */
+	{ USB_DEVICE(0x10C4, 0x8946) }, /* Ketra N1 Wireless Interface */
 	{ USB_DEVICE(0x10C4, 0xEA60) }, /* Silicon Labs factory default */
 	{ USB_DEVICE(0x10C4, 0xEA61) }, /* Silicon Labs factory default */
 	{ USB_DEVICE(0x10C4, 0xEA70) }, /* Silicon Labs factory default */
@@ -155,6 +156,7 @@ static const struct usb_device_id id_table[] = {
 	{ USB_DEVICE(0x1ADB, 0x0001) }, /* Schweitzer Engineering C662 Cable */
 	{ USB_DEVICE(0x1B1C, 0x1C00) }, /* Corsair USB Dongle */
 	{ USB_DEVICE(0x1BE3, 0x07A6) }, /* WAGO 750-923 USB Service Cable */
+	{ USB_DEVICE(0x1D6F, 0x0010) }, /* Seluxit ApS RF Dongle */
 	{ USB_DEVICE(0x1E29, 0x0102) }, /* Festo CPX-USB */
 	{ USB_DEVICE(0x1E29, 0x0501) }, /* Festo CMSP */
 	{ USB_DEVICE(0x1FB9, 0x0100) }, /* Lake Shore Model 121 Current Source */
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index 54a8120897a6..d1a3f6044c8a 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -276,6 +276,7 @@ static void option_instat_callback(struct urb *urb);
 #define ZTE_PRODUCT_MF628			0x0015
 #define ZTE_PRODUCT_MF626			0x0031
 #define ZTE_PRODUCT_AC2726			0xfff1
+#define ZTE_PRODUCT_MG880			0xfffd
 #define ZTE_PRODUCT_CDMA_TECH			0xfffe
 #define ZTE_PRODUCT_AC8710T			0xffff
 #define ZTE_PRODUCT_MC2718			0xffe8
@@ -1560,7 +1561,15 @@ static const struct usb_device_id option_ids[] = {
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff92, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff93, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff94, 0xff, 0xff, 0xff) },
-
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffec, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xffee, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xfff6, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xfff7, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xfff8, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xfff9, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xfffb, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xfffc, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_MG880, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_CDMA_TECH, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_AC2726, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_AC8710T, 0xff, 0xff, 0xff) },
diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c
index e9bad928039f..0f872e6b2c87 100644
--- a/drivers/usb/serial/pl2303.c
+++ b/drivers/usb/serial/pl2303.c
@@ -162,6 +162,9 @@ static const struct pl2303_type_data pl2303_type_data[TYPE_COUNT] = {
 		.max_baud_rate =	1228800,
 		.quirks =		PL2303_QUIRK_LEGACY,
 	},
+	[TYPE_HX] = {
+		.max_baud_rate =	12000000,
+	},
 };
 
 static int pl2303_vendor_read(struct usb_serial *serial, u16 value,
@@ -395,16 +398,14 @@ static void pl2303_encode_baud_rate(struct tty_struct *tty,
 	if (spriv->type->max_baud_rate)
 		baud = min_t(speed_t, baud, spriv->type->max_baud_rate);
 	/*
-	 * Set baud rate to nearest supported value.
-	 *
-	 * NOTE: Baud rate 500k can only be set using divisors.
+	 * Use direct method for supported baud rates, otherwise use divisors.
 	 */
 	baud_sup = pl2303_get_supported_baud_rate(baud);
 
-	if (baud == 500000)
-		baud = pl2303_encode_baud_rate_divisor(buf, baud);
+	if (baud == baud_sup)
+		baud = pl2303_encode_baud_rate_direct(buf, baud);
 	else
-		baud = pl2303_encode_baud_rate_direct(buf, baud_sup);
+		baud = pl2303_encode_baud_rate_divisor(buf, baud);
 
 	/* Save resulting baud rate */
 	tty_encode_baud_rate(tty, baud, baud);
diff --git a/drivers/usb/serial/usb-serial-simple.c b/drivers/usb/serial/usb-serial-simple.c
index fb79775447b0..7064eb8d6142 100644
--- a/drivers/usb/serial/usb-serial-simple.c
+++ b/drivers/usb/serial/usb-serial-simple.c
@@ -20,7 +20,7 @@
 #include <linux/usb.h>
 #include <linux/usb/serial.h>
 
-#define DEVICE(vendor, IDS)					\
+#define DEVICE_N(vendor, IDS, nport)				\
 static const struct usb_device_id vendor##_id_table[] = {	\
 	IDS(),							\
 	{ },							\
@@ -31,9 +31,15 @@ static struct usb_serial_driver vendor##_device = {		\
 		.name =		#vendor,			\
 	},							\
 	.id_table =		vendor##_id_table,		\
-	.num_ports =		1,				\
+	.num_ports =		nport,				\
 };
 
+#define DEVICE(vendor, IDS)	DEVICE_N(vendor, IDS, 1)
+
+/* Medtronic CareLink USB driver */
+#define CARELINK_IDS()			\
+	{ USB_DEVICE(0x0a21, 0x8001) }	/* MMT-7305WW */
+DEVICE(carelink, CARELINK_IDS);
 
 /* ZIO Motherboard USB driver */
 #define ZIO_IDS()			\
@@ -64,6 +70,11 @@ DEVICE(vivopay, VIVOPAY_IDS);
 	{ USB_DEVICE(0x22b8, 0x2c64) }	/* Motorola V950 phone */
 DEVICE(moto_modem, MOTO_IDS);
 
+/* Novatel Wireless GPS driver */
+#define NOVATEL_IDS()			\
+	{ USB_DEVICE(0x09d7, 0x0100) }	/* NovAtel FlexPack GPS */
+DEVICE_N(novatel_gps, NOVATEL_IDS, 3);
+
 /* HP4x (48/49) Generic Serial driver */
 #define HP4X_IDS()			\
 	{ USB_DEVICE(0x03f0, 0x0121) }
@@ -82,11 +93,13 @@ DEVICE(siemens_mpi, SIEMENS_IDS);
 
 /* All of the above structures mushed into two lists */
 static struct usb_serial_driver * const serial_drivers[] = {
+	&carelink_device,
 	&zio_device,
 	&funsoft_device,
 	&flashloader_device,
 	&vivopay_device,
 	&moto_modem_device,
+	&novatel_gps_device,
 	&hp4x_device,
 	&suunto_device,
 	&siemens_mpi_device,
@@ -94,11 +107,13 @@ static struct usb_serial_driver * const serial_drivers[] = {
 };
 
 static const struct usb_device_id id_table[] = {
+	CARELINK_IDS(),
 	ZIO_IDS(),
 	FUNSOFT_IDS(),
 	FLASHLOADER_IDS(),
 	VIVOPAY_IDS(),
 	MOTO_IDS(),
+	NOVATEL_IDS(),
 	HP4X_IDS(),
 	SUUNTO_IDS(),
 	SIEMENS_IDS(),
diff --git a/drivers/usb/serial/xsens_mt.c b/drivers/usb/serial/xsens_mt.c
index 4841fb57400c..3837d5113bb2 100644
--- a/drivers/usb/serial/xsens_mt.c
+++ b/drivers/usb/serial/xsens_mt.c
@@ -41,28 +41,13 @@ static const struct usb_device_id id_table[] = {
 };
 MODULE_DEVICE_TABLE(usb, id_table);
 
-static int has_required_endpoints(const struct usb_host_interface *interface)
-{
-	__u8 i;
-	int has_bulk_in = 0;
-	int has_bulk_out = 0;
-
-	for (i = 0; i < interface->desc.bNumEndpoints; ++i) {
-		if (usb_endpoint_is_bulk_in(&interface->endpoint[i].desc))
-			has_bulk_in = 1;
-		else if (usb_endpoint_is_bulk_out(&interface->endpoint[i].desc))
-			has_bulk_out = 1;
-	}
-
-	return has_bulk_in && has_bulk_out;
-}
-
 static int xsens_mt_probe(struct usb_serial *serial,
 					const struct usb_device_id *id)
 {
-	if (!has_required_endpoints(serial->interface->cur_altsetting))
-		return -ENODEV;
-	return 0;
+	if (serial->interface->cur_altsetting->desc.bInterfaceNumber == 1)
+		return 0;
+
+	return -ENODEV;
 }
 
 static struct usb_serial_driver xsens_mt_device = {
@@ -82,4 +67,6 @@ static struct usb_serial_driver * const serial_drivers[] = {
 
 module_usb_serial_driver(serial_drivers, id_table);
 
+MODULE_AUTHOR("Frans Klaver <frans.klaver@xsens.com>");
+MODULE_DESCRIPTION("USB-serial driver for Xsens motion trackers");
 MODULE_LICENSE("GPL");
diff --git a/drivers/usb/serial/zte_ev.c b/drivers/usb/serial/zte_ev.c
deleted file mode 100644
index c9bb107d5e5c..000000000000
--- a/drivers/usb/serial/zte_ev.c
+++ /dev/null
@@ -1,305 +0,0 @@
-/*
- * ZTE_EV USB serial driver
- *
- * Copyright (C) 2012 Greg Kroah-Hartman <gregkh@linuxfoundation.org>
- * Copyright (C) 2012 Linux Foundation
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This driver is based on code found in a ZTE_ENV patch that modified
- * the usb-serial generic driver.  Comments were left in that I think
- * show the commands used to talk to the device, but I am not sure.
- */
-#include <linux/kernel.h>
-#include <linux/tty.h>
-#include <linux/slab.h>
-#include <linux/module.h>
-#include <linux/usb.h>
-#include <linux/usb/serial.h>
-#include <linux/uaccess.h>
-
-#define  MAX_SETUP_DATA_SIZE	32
-
-static void debug_data(struct device *dev, const char *function, int len,
-		       const unsigned char *data, int result)
-{
-	dev_dbg(dev, "result = %d\n", result);
-	if (result == len)
-		dev_dbg(dev, "%s - length = %d, data = %*ph\n", function,
-			len, len, data);
-}
-
-static int zte_ev_usb_serial_open(struct tty_struct *tty,
-				  struct usb_serial_port *port)
-{
-	struct usb_device *udev = port->serial->dev;
-	struct device *dev = &port->dev;
-	int result = 0;
-	int len;
-	unsigned char *buf;
-
-	buf = kmalloc(MAX_SETUP_DATA_SIZE, GFP_KERNEL);
-	if (!buf)
-		return -ENOMEM;
-
-	/* send 1st ctl cmd(CTL    21 22 01 00  00 00 00 00) */
-	len = 0;
-	result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
-				 0x22, 0x21,
-				 0x0001, 0x0000, NULL, len,
-				 USB_CTRL_GET_TIMEOUT);
-	dev_dbg(dev, "result = %d\n", result);
-
-	/* send 2st cmd and receive data */
-	/*
-	 * 16.0  CTL    a1 21 00 00  00 00 07 00   CLASS              25.1.0(5)
-	 * 16.0  DI     00 96 00 00  00 00 08
-	 */
-	len = 0x0007;
-	result = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0),
-				 0x21, 0xa1,
-				 0x0000, 0x0000, buf, len,
-				 USB_CTRL_GET_TIMEOUT);
-	debug_data(dev, __func__, len, buf, result);
-
-	/* send 3rd cmd */
-	/*
-	 * 16.0 CTL    21 20 00 00  00 00 07 00    CLASS                30.1.0
-	 * 16.0 DO     80 25 00 00  00 00 08       .%.....              30.2.0
-	 */
-	len = 0x0007;
-	buf[0] = 0x80;
-	buf[1] = 0x25;
-	buf[2] = 0x00;
-	buf[3] = 0x00;
-	buf[4] = 0x00;
-	buf[5] = 0x00;
-	buf[6] = 0x08;
-	result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
-				 0x20, 0x21,
-				 0x0000, 0x0000, buf, len,
-				 USB_CTRL_GET_TIMEOUT);
-	debug_data(dev, __func__, len, buf, result);
-
-	/* send 4th cmd */
-	/*
-	 * 16.0 CTL    21 22 03 00  00 00 00 00
-	 */
-	len = 0;
-	result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
-				 0x22, 0x21,
-				 0x0003, 0x0000, NULL, len,
-				 USB_CTRL_GET_TIMEOUT);
-	dev_dbg(dev, "result = %d\n", result);
-
-	/* send 5th cmd */
-	/*
-	 * 16.0  CTL    a1 21 00 00  00 00 07 00   CLASS               33.1.0
-	 * 16.0  DI     80 25 00 00  00 00 08
-	 */
-	len = 0x0007;
-	result = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0),
-				 0x21, 0xa1,
-				 0x0000, 0x0000, buf, len,
-				 USB_CTRL_GET_TIMEOUT);
-	debug_data(dev, __func__, len, buf, result);
-
-	/* send 6th cmd */
-	/*
-	 * 16.0  CTL    21 20 00 00  00 00 07 00    CLASS               34.1.0
-	 * 16.0  DO     80 25 00 00  00 00 08
-	 */
-	len = 0x0007;
-	buf[0] = 0x80;
-	buf[1] = 0x25;
-	buf[2] = 0x00;
-	buf[3] = 0x00;
-	buf[4] = 0x00;
-	buf[5] = 0x00;
-	buf[6] = 0x08;
-	result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
-				 0x20, 0x21,
-				 0x0000, 0x0000, buf, len,
-				 USB_CTRL_GET_TIMEOUT);
-	debug_data(dev, __func__, len, buf, result);
-	kfree(buf);
-
-	return usb_serial_generic_open(tty, port);
-}
-
-/*
- *       CTL    21 22 02 00  00 00 00 00         CLASS               338.1.0
- *
- * 16.1  DI     a1 20 00 00  00 00 02 00  02 00  . ........          340.1.0
- * 16.0  CTL    21 22 03 00  00 00 00 00         CLASS               341.1.0
- *
- * 16.0  CTL    a1 21 00 00  00 00 07 00         CLASS               346.1.0(3)
- * 16.0  DI     00 08 07 00  00 00 08            .......             346.2.0
- *
- * 16.0  CTL    21 20 00 00  00 00 07 00         CLASS               349.1.0
- * 16.0  DO     00 c2 01 00  00 00 08            .......             349.2.0
- *
- * 16.0  CTL    21 22 03 00  00 00 00 00         CLASS               350.1.0(2)
- *
- * 16.0  CTL    a1 21 00 00  00 00 07 00         CLASS               352.1.0
- * 16.0  DI     00 c2 01 00  00 00 08            .......             352.2.0
- *
- * 16.1  DI     a1 20 00 00  00 00 02 00  02 00  . ........          353.1.0
- *
- * 16.0  CTL    21 20 00 00  00 00 07 00         CLASS               354.1.0
- * 16.0  DO     00 c2 01 00  00 00 08            .......             354.2.0
- *
- * 16.0  CTL    21 22 03 00  00 00 00 00
-*/
-
-static void zte_ev_usb_serial_close(struct usb_serial_port *port)
-{
-	struct usb_device *udev = port->serial->dev;
-	struct device *dev = &port->dev;
-	int result = 0;
-	int len;
-	unsigned char *buf;
-
-	buf = kmalloc(MAX_SETUP_DATA_SIZE, GFP_KERNEL);
-	if (!buf)
-		return;
-
-	/* send 1st ctl cmd(CTL    21 22 02 00  00 00 00 00) */
-	len = 0;
-	result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
-				 0x22, 0x21,
-				 0x0002, 0x0000, NULL, len,
-				 USB_CTRL_GET_TIMEOUT);
-	dev_dbg(dev, "result = %d\n", result);
-
-	/* send 2st ctl cmd(CTL    21 22 03 00  00 00 00 00 ) */
-	len = 0;
-	result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
-				 0x22, 0x21,
-				 0x0003, 0x0000, NULL, len,
-				 USB_CTRL_GET_TIMEOUT);
-	dev_dbg(dev, "result = %d\n", result);
-
-	/* send  3st cmd and recieve data */
-	/*
-	 * 16.0  CTL    a1 21 00 00  00 00 07 00      CLASS         25.1.0(5)
-	 * 16.0  DI     00 08 07 00  00 00 08
-	 */
-	len = 0x0007;
-	result = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0),
-				 0x21, 0xa1,
-				 0x0000, 0x0000, buf, len,
-				 USB_CTRL_GET_TIMEOUT);
-	debug_data(dev, __func__, len, buf, result);
-
-	/* send 4th cmd */
-	/*
-	 * 16.0 CTL    21 20 00 00  00 00 07 00      CLASS            30.1.0
-	 * 16.0  DO    00 c2 01 00  00 00 08         .%.....          30.2.0
-	 */
-	len = 0x0007;
-	buf[0] = 0x00;
-	buf[1] = 0xc2;
-	buf[2] = 0x01;
-	buf[3] = 0x00;
-	buf[4] = 0x00;
-	buf[5] = 0x00;
-	buf[6] = 0x08;
-	result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
-				 0x20, 0x21,
-				 0x0000, 0x0000, buf, len,
-				 USB_CTRL_GET_TIMEOUT);
-	debug_data(dev, __func__, len, buf, result);
-
-	/* send 5th cmd */
-	/*
-	 * 16.0 CTL    21 22 03 00  00 00 00 00
-	 */
-	len = 0;
-	result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
-				 0x22, 0x21,
-				 0x0003, 0x0000, NULL, len,
-				 USB_CTRL_GET_TIMEOUT);
-	dev_dbg(dev, "result = %d\n", result);
-
-	/* send 6th cmd */
-	/*
-	 * 16.0  CTL    a1 21 00 00  00 00 07 00        CLASS          33.1.0
-	 * 16.0  DI     00 c2 01 00  00 00 08
-	 */
-	len = 0x0007;
-	result = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0),
-				 0x21, 0xa1,
-				 0x0000, 0x0000, buf, len,
-				 USB_CTRL_GET_TIMEOUT);
-	debug_data(dev, __func__, len, buf, result);
-
-	/* send 7th cmd */
-	/*
-	 * 16.0  CTL    21 20 00 00  00 00 07 00  CLASS               354.1.0
-	 * 16.0  DO     00 c2 01 00  00 00 08     .......             354.2.0
-	 */
-	len = 0x0007;
-	buf[0] = 0x00;
-	buf[1] = 0xc2;
-	buf[2] = 0x01;
-	buf[3] = 0x00;
-	buf[4] = 0x00;
-	buf[5] = 0x00;
-	buf[6] = 0x08;
-	result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
-				 0x20, 0x21,
-				 0x0000, 0x0000, buf, len,
-				 USB_CTRL_GET_TIMEOUT);
-	debug_data(dev, __func__, len, buf, result);
-
-	/* send 8th cmd */
-	/*
-	 * 16.0 CTL    21 22 03 00  00 00 00 00
-	 */
-	len = 0;
-	result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
-				 0x22, 0x21,
-				 0x0003, 0x0000, NULL, len,
-				 USB_CTRL_GET_TIMEOUT);
-	dev_dbg(dev, "result = %d\n", result);
-
-	kfree(buf);
-
-	usb_serial_generic_close(port);
-}
-
-static const struct usb_device_id id_table[] = {
-	{ USB_DEVICE(0x19d2, 0xffec) },
-	{ USB_DEVICE(0x19d2, 0xffee) },
-	{ USB_DEVICE(0x19d2, 0xfff6) },
-	{ USB_DEVICE(0x19d2, 0xfff7) },
-	{ USB_DEVICE(0x19d2, 0xfff8) },
-	{ USB_DEVICE(0x19d2, 0xfff9) },
-	{ USB_DEVICE(0x19d2, 0xfffb) },
-	{ USB_DEVICE(0x19d2, 0xfffc) },
-	/* MG880 */
-	{ USB_DEVICE(0x19d2, 0xfffd) },
-	{ },
-};
-MODULE_DEVICE_TABLE(usb, id_table);
-
-static struct usb_serial_driver zio_device = {
-	.driver = {
-		.owner =	THIS_MODULE,
-		.name =		"zte_ev",
-	},
-	.id_table =		id_table,
-	.num_ports =		1,
-	.open =			zte_ev_usb_serial_open,
-	.close =		zte_ev_usb_serial_close,
-};
-
-static struct usb_serial_driver * const serial_drivers[] = {
-	&zio_device, NULL
-};
-
-module_usb_serial_driver(serial_drivers, id_table);
-MODULE_LICENSE("GPL v2");
diff --git a/drivers/usb/storage/alauda.c b/drivers/usb/storage/alauda.c
index 6636a583da12..62c2d9daa7d6 100644
--- a/drivers/usb/storage/alauda.c
+++ b/drivers/usb/storage/alauda.c
@@ -415,14 +415,11 @@ static int alauda_init_media(struct us_data *us)
 	if (alauda_get_media_signature(us, data) != USB_STOR_XFER_GOOD)
 		return USB_STOR_TRANSPORT_ERROR;
 
-	usb_stor_dbg(us, "Media signature: %02X %02X %02X %02X\n",
-		     data[0], data[1], data[2], data[3]);
+	usb_stor_dbg(us, "Media signature: %4ph\n", data);
 	media_info = alauda_card_find_id(data[1]);
 	if (media_info == NULL) {
-		printk(KERN_WARNING
-			"alauda_init_media: Unrecognised media signature: "
-			"%02X %02X %02X %02X\n",
-			data[0], data[1], data[2], data[3]);
+		pr_warn("alauda_init_media: Unrecognised media signature: %4ph\n",
+			data);
 		return USB_STOR_TRANSPORT_ERROR;
 	}
 
@@ -513,7 +510,7 @@ static int alauda_check_status2(struct us_data *us)
 	if (rc != USB_STOR_XFER_GOOD)
 		return rc;
 
-	usb_stor_dbg(us, "%02X %02X %02X\n", data[0], data[1], data[2]);
+	usb_stor_dbg(us, "%3ph\n", data);
 	if (data[0] & ALAUDA_STATUS_ERROR)
 		return USB_STOR_XFER_ERROR;
 
diff --git a/drivers/usb/storage/initializers.c b/drivers/usb/storage/initializers.c
index 5a8b5ff1e45b..4bc2fc98636e 100644
--- a/drivers/usb/storage/initializers.c
+++ b/drivers/usb/storage/initializers.c
@@ -52,7 +52,7 @@ int usb_stor_euscsi_init(struct us_data *us)
 	us->iobuf[0] = 0x1;
 	result = usb_stor_control_msg(us, us->send_ctrl_pipe,
 			0x0C, USB_RECIP_INTERFACE | USB_TYPE_VENDOR,
-			0x01, 0x0, us->iobuf, 0x1, 5000);
+			0x01, 0x0, us->iobuf, 0x1, USB_CTRL_SET_TIMEOUT);
 	usb_stor_dbg(us, "-- result is %d\n", result);
 
 	return 0;
diff --git a/drivers/usb/storage/realtek_cr.c b/drivers/usb/storage/realtek_cr.c
index 281be56d5648..8591d89a38e6 100644
--- a/drivers/usb/storage/realtek_cr.c
+++ b/drivers/usb/storage/realtek_cr.c
@@ -115,7 +115,7 @@ struct rts51x_chip {
 	enum RTS51X_STAT state;
 	int support_auto_delink;
 #endif
-	/* used to back up the protocal choosen in probe1 phase */
+	/* used to back up the protocol chosen in probe1 phase */
 	proto_cmnd proto_handler_backup;
 };
 
@@ -925,7 +925,7 @@ static int realtek_cr_autosuspend_setup(struct us_data *us)
 			(unsigned long)chip);
 	fw5895_init(us);
 
-	/* enable autosuspend funciton of the usb device */
+	/* enable autosuspend function of the usb device */
 	usb_enable_autosuspend(us->pusb_dev);
 
 	return 0;
diff --git a/drivers/usb/storage/scsiglue.c b/drivers/usb/storage/scsiglue.c
index 866b5df36ed1..0e400f382f3a 100644
--- a/drivers/usb/storage/scsiglue.c
+++ b/drivers/usb/storage/scsiglue.c
@@ -241,7 +241,7 @@ static int slave_configure(struct scsi_device *sdev)
 
 		/* Some USB cardreaders have trouble reading an sdcard's last
 		 * sector in a larger then 1 sector read, since the performance
-		 * impact is negible we set this flag for all USB disks */
+		 * impact is negligible we set this flag for all USB disks */
 		sdev->last_sector_bug = 1;
 
 		/* Enable last-sector hacks for single-target devices using
diff --git a/drivers/usb/storage/sddr09.c b/drivers/usb/storage/sddr09.c
index 38a4504ce450..3847053d732c 100644
--- a/drivers/usb/storage/sddr09.c
+++ b/drivers/usb/storage/sddr09.c
@@ -1155,8 +1155,7 @@ sddr09_get_cardinfo(struct us_data *us, unsigned char flags) {
 		return NULL;
 	}
 
-	sprintf(blurbtxt, "sddr09: Found Flash card, ID = %02X %02X %02X %02X",
-		deviceID[0], deviceID[1], deviceID[2], deviceID[3]);
+	sprintf(blurbtxt, "sddr09: Found Flash card, ID = %4ph", deviceID);
 
 	/* Byte 0 is the manufacturer */
 	sprintf(blurbtxt + strlen(blurbtxt),
diff --git a/drivers/usb/storage/uas.c b/drivers/usb/storage/uas.c
index 9bfa7252f7f9..89b24349269e 100644
--- a/drivers/usb/storage/uas.c
+++ b/drivers/usb/storage/uas.c
@@ -2,7 +2,7 @@
  * USB Attached SCSI
  * Note that this is not the same as the USB Mass Storage driver
  *
- * Copyright Hans de Goede <hdegoede@redhat.com> for Red Hat, Inc. 2013
+ * Copyright Hans de Goede <hdegoede@redhat.com> for Red Hat, Inc. 2013 - 2014
  * Copyright Matthew Wilcox for Intel Corp, 2010
  * Copyright Sarah Sharp for Intel Corp, 2010
  *
@@ -28,20 +28,9 @@
 #include <scsi/scsi_tcq.h>
 
 #include "uas-detect.h"
+#include "scsiglue.h"
 
-/*
- * The r00-r01c specs define this version of the SENSE IU data structure.
- * It's still in use by several different firmware releases.
- */
-struct sense_iu_old {
-	__u8 iu_id;
-	__u8 rsvd1;
-	__be16 tag;
-	__be16 len;
-	__u8 status;
-	__u8 service_response;
-	__u8 sense[SCSI_SENSE_BUFFERSIZE];
-};
+#define MAX_CMNDS 256
 
 struct uas_dev_info {
 	struct usb_interface *intf;
@@ -49,18 +38,14 @@ struct uas_dev_info {
 	struct usb_anchor cmd_urbs;
 	struct usb_anchor sense_urbs;
 	struct usb_anchor data_urbs;
+	unsigned long flags;
 	int qdepth, resetting;
-	struct response_iu response;
 	unsigned cmd_pipe, status_pipe, data_in_pipe, data_out_pipe;
 	unsigned use_streams:1;
-	unsigned uas_sense_old:1;
-	unsigned running_task:1;
 	unsigned shutdown:1;
-	struct scsi_cmnd *cmnd;
+	struct scsi_cmnd *cmnd[MAX_CMNDS];
 	spinlock_t lock;
 	struct work_struct work;
-	struct list_head inflight_list;
-	struct list_head dead_list;
 };
 
 enum {
@@ -74,10 +59,8 @@ enum {
 	COMMAND_INFLIGHT        = (1 << 8),
 	DATA_IN_URB_INFLIGHT    = (1 << 9),
 	DATA_OUT_URB_INFLIGHT   = (1 << 10),
-	COMMAND_COMPLETED       = (1 << 11),
-	COMMAND_ABORTED         = (1 << 12),
-	UNLINK_DATA_URBS        = (1 << 13),
-	IS_IN_WORK_LIST         = (1 << 14),
+	COMMAND_ABORTED         = (1 << 11),
+	IS_IN_WORK_LIST         = (1 << 12),
 };
 
 /* Overrides scsi_pointer */
@@ -87,7 +70,6 @@ struct uas_cmd_info {
 	struct urb *cmd_urb;
 	struct urb *data_in_urb;
 	struct urb *data_out_urb;
-	struct list_head list;
 };
 
 /* I hate forward declarations, but I actually have a loop */
@@ -96,43 +78,29 @@ static int uas_submit_urbs(struct scsi_cmnd *cmnd,
 static void uas_do_work(struct work_struct *work);
 static int uas_try_complete(struct scsi_cmnd *cmnd, const char *caller);
 static void uas_free_streams(struct uas_dev_info *devinfo);
-static void uas_log_cmd_state(struct scsi_cmnd *cmnd, const char *caller);
-
-/* Must be called with devinfo->lock held, will temporary unlock the lock */
-static void uas_unlink_data_urbs(struct uas_dev_info *devinfo,
-				 struct uas_cmd_info *cmdinfo,
-				 unsigned long *lock_flags)
-{
-	/*
-	 * The UNLINK_DATA_URBS flag makes sure uas_try_complete
-	 * (called by urb completion) doesn't release cmdinfo
-	 * underneath us.
-	 */
-	cmdinfo->state |= UNLINK_DATA_URBS;
-	spin_unlock_irqrestore(&devinfo->lock, *lock_flags);
-
-	if (cmdinfo->data_in_urb)
-		usb_unlink_urb(cmdinfo->data_in_urb);
-	if (cmdinfo->data_out_urb)
-		usb_unlink_urb(cmdinfo->data_out_urb);
-
-	spin_lock_irqsave(&devinfo->lock, *lock_flags);
-	cmdinfo->state &= ~UNLINK_DATA_URBS;
-}
+static void uas_log_cmd_state(struct scsi_cmnd *cmnd, const char *prefix,
+				int status);
 
 static void uas_do_work(struct work_struct *work)
 {
 	struct uas_dev_info *devinfo =
 		container_of(work, struct uas_dev_info, work);
 	struct uas_cmd_info *cmdinfo;
+	struct scsi_cmnd *cmnd;
 	unsigned long flags;
-	int err;
+	int i, err;
 
 	spin_lock_irqsave(&devinfo->lock, flags);
-	list_for_each_entry(cmdinfo, &devinfo->inflight_list, list) {
-		struct scsi_pointer *scp = (void *)cmdinfo;
-		struct scsi_cmnd *cmnd = container_of(scp, struct scsi_cmnd,
-						      SCp);
+
+	if (devinfo->resetting)
+		goto out;
+
+	for (i = 0; i < devinfo->qdepth; i++) {
+		if (!devinfo->cmnd[i])
+			continue;
+
+		cmnd = devinfo->cmnd[i];
+		cmdinfo = (void *)&cmnd->SCp;
 
 		if (!(cmdinfo->state & IS_IN_WORK_LIST))
 			continue;
@@ -143,35 +111,7 @@ static void uas_do_work(struct work_struct *work)
 		else
 			schedule_work(&devinfo->work);
 	}
-	spin_unlock_irqrestore(&devinfo->lock, flags);
-}
-
-static void uas_mark_cmd_dead(struct uas_dev_info *devinfo,
-			      struct uas_cmd_info *cmdinfo,
-			      int result, const char *caller)
-{
-	struct scsi_pointer *scp = (void *)cmdinfo;
-	struct scsi_cmnd *cmnd = container_of(scp, struct scsi_cmnd, SCp);
-
-	uas_log_cmd_state(cmnd, caller);
-	WARN_ON_ONCE(!spin_is_locked(&devinfo->lock));
-	WARN_ON_ONCE(cmdinfo->state & COMMAND_ABORTED);
-	cmdinfo->state |= COMMAND_ABORTED;
-	cmdinfo->state &= ~IS_IN_WORK_LIST;
-	cmnd->result = result << 16;
-	list_move_tail(&cmdinfo->list, &devinfo->dead_list);
-}
-
-static void uas_abort_inflight(struct uas_dev_info *devinfo, int result,
-			       const char *caller)
-{
-	struct uas_cmd_info *cmdinfo;
-	struct uas_cmd_info *temp;
-	unsigned long flags;
-
-	spin_lock_irqsave(&devinfo->lock, flags);
-	list_for_each_entry_safe(cmdinfo, temp, &devinfo->inflight_list, list)
-		uas_mark_cmd_dead(devinfo, cmdinfo, result, caller);
+out:
 	spin_unlock_irqrestore(&devinfo->lock, flags);
 }
 
@@ -181,31 +121,32 @@ static void uas_add_work(struct uas_cmd_info *cmdinfo)
 	struct scsi_cmnd *cmnd = container_of(scp, struct scsi_cmnd, SCp);
 	struct uas_dev_info *devinfo = cmnd->device->hostdata;
 
-	WARN_ON_ONCE(!spin_is_locked(&devinfo->lock));
+	lockdep_assert_held(&devinfo->lock);
 	cmdinfo->state |= IS_IN_WORK_LIST;
 	schedule_work(&devinfo->work);
 }
 
-static void uas_zap_dead(struct uas_dev_info *devinfo)
+static void uas_zap_pending(struct uas_dev_info *devinfo, int result)
 {
 	struct uas_cmd_info *cmdinfo;
-	struct uas_cmd_info *temp;
+	struct scsi_cmnd *cmnd;
 	unsigned long flags;
+	int i, err;
 
 	spin_lock_irqsave(&devinfo->lock, flags);
-	list_for_each_entry_safe(cmdinfo, temp, &devinfo->dead_list, list) {
-		struct scsi_pointer *scp = (void *)cmdinfo;
-		struct scsi_cmnd *cmnd = container_of(scp, struct scsi_cmnd,
-						      SCp);
-		uas_log_cmd_state(cmnd, __func__);
-		WARN_ON_ONCE(!(cmdinfo->state & COMMAND_ABORTED));
-		/* all urbs are killed, clear inflight bits */
-		cmdinfo->state &= ~(COMMAND_INFLIGHT |
-				    DATA_IN_URB_INFLIGHT |
-				    DATA_OUT_URB_INFLIGHT);
-		uas_try_complete(cmnd, __func__);
+	for (i = 0; i < devinfo->qdepth; i++) {
+		if (!devinfo->cmnd[i])
+			continue;
+
+		cmnd = devinfo->cmnd[i];
+		cmdinfo = (void *)&cmnd->SCp;
+		uas_log_cmd_state(cmnd, __func__, 0);
+		/* Sense urbs were killed, clear COMMAND_INFLIGHT manually */
+		cmdinfo->state &= ~COMMAND_INFLIGHT;
+		cmnd->result = result << 16;
+		err = uas_try_complete(cmnd, __func__);
+		WARN_ON(err != 0);
 	}
-	devinfo->running_task = 0;
 	spin_unlock_irqrestore(&devinfo->lock, flags);
 }
 
@@ -232,36 +173,30 @@ static void uas_sense(struct urb *urb, struct scsi_cmnd *cmnd)
 	cmnd->result = sense_iu->status;
 }
 
-static void uas_sense_old(struct urb *urb, struct scsi_cmnd *cmnd)
+/*
+ * scsi-tags go from 0 - (nr_tags - 1), uas tags need to match stream-ids,
+ * which go from 1 - nr_streams. And we use 1 for untagged commands.
+ */
+static int uas_get_tag(struct scsi_cmnd *cmnd)
 {
-	struct sense_iu_old *sense_iu = urb->transfer_buffer;
-	struct scsi_device *sdev = cmnd->device;
+	int tag;
 
-	if (urb->actual_length > 8) {
-		unsigned len = be16_to_cpup(&sense_iu->len) - 2;
-		if (len + 8 != urb->actual_length) {
-			int newlen = min(len + 8, urb->actual_length) - 8;
-			if (newlen < 0)
-				newlen = 0;
-			sdev_printk(KERN_INFO, sdev, "%s: urb length %d "
-				"disagrees with IU sense data length %d, "
-				"using %d bytes of sense data\n", __func__,
-					urb->actual_length, len, newlen);
-			len = newlen;
-		}
-		memcpy(cmnd->sense_buffer, sense_iu->sense, len);
-	}
+	if (blk_rq_tagged(cmnd->request))
+		tag = cmnd->request->tag + 2;
+	else
+		tag = 1;
 
-	cmnd->result = sense_iu->status;
+	return tag;
 }
 
-static void uas_log_cmd_state(struct scsi_cmnd *cmnd, const char *caller)
+static void uas_log_cmd_state(struct scsi_cmnd *cmnd, const char *prefix,
+			      int status)
 {
 	struct uas_cmd_info *ci = (void *)&cmnd->SCp;
 
-	scmd_printk(KERN_INFO, cmnd, "%s %p tag %d, inflight:"
-		    "%s%s%s%s%s%s%s%s%s%s%s%s%s%s\n",
-		    caller, cmnd, cmnd->request->tag,
+	scmd_printk(KERN_INFO, cmnd,
+		    "%s %d tag %d inflight:%s%s%s%s%s%s%s%s%s%s%s%s ",
+		    prefix, status, uas_get_tag(cmnd),
 		    (ci->state & SUBMIT_STATUS_URB)     ? " s-st"  : "",
 		    (ci->state & ALLOC_DATA_IN_URB)     ? " a-in"  : "",
 		    (ci->state & SUBMIT_DATA_IN_URB)    ? " s-in"  : "",
@@ -272,10 +207,28 @@ static void uas_log_cmd_state(struct scsi_cmnd *cmnd, const char *caller)
 		    (ci->state & COMMAND_INFLIGHT)      ? " CMD"   : "",
 		    (ci->state & DATA_IN_URB_INFLIGHT)  ? " IN"    : "",
 		    (ci->state & DATA_OUT_URB_INFLIGHT) ? " OUT"   : "",
-		    (ci->state & COMMAND_COMPLETED)     ? " done"  : "",
 		    (ci->state & COMMAND_ABORTED)       ? " abort" : "",
-		    (ci->state & UNLINK_DATA_URBS)      ? " unlink": "",
 		    (ci->state & IS_IN_WORK_LIST)       ? " work"  : "");
+	scsi_print_command(cmnd);
+}
+
+static void uas_free_unsubmitted_urbs(struct scsi_cmnd *cmnd)
+{
+	struct uas_cmd_info *cmdinfo;
+
+	if (!cmnd)
+		return;
+
+	cmdinfo = (void *)&cmnd->SCp;
+
+	if (cmdinfo->state & SUBMIT_CMD_URB)
+		usb_free_urb(cmdinfo->cmd_urb);
+
+	/* data urbs may have never gotten their submit flag set */
+	if (!(cmdinfo->state & DATA_IN_URB_INFLIGHT))
+		usb_free_urb(cmdinfo->data_in_urb);
+	if (!(cmdinfo->state & DATA_OUT_URB_INFLIGHT))
+		usb_free_urb(cmdinfo->data_out_urb);
 }
 
 static int uas_try_complete(struct scsi_cmnd *cmnd, const char *caller)
@@ -283,19 +236,14 @@ static int uas_try_complete(struct scsi_cmnd *cmnd, const char *caller)
 	struct uas_cmd_info *cmdinfo = (void *)&cmnd->SCp;
 	struct uas_dev_info *devinfo = (void *)cmnd->device->hostdata;
 
-	WARN_ON_ONCE(!spin_is_locked(&devinfo->lock));
+	lockdep_assert_held(&devinfo->lock);
 	if (cmdinfo->state & (COMMAND_INFLIGHT |
 			      DATA_IN_URB_INFLIGHT |
 			      DATA_OUT_URB_INFLIGHT |
-			      UNLINK_DATA_URBS))
+			      COMMAND_ABORTED))
 		return -EBUSY;
-	WARN_ON_ONCE(cmdinfo->state & COMMAND_COMPLETED);
-	cmdinfo->state |= COMMAND_COMPLETED;
-	usb_free_urb(cmdinfo->data_in_urb);
-	usb_free_urb(cmdinfo->data_out_urb);
-	if (cmdinfo->state & COMMAND_ABORTED)
-		scmd_printk(KERN_INFO, cmnd, "abort completed\n");
-	list_del(&cmdinfo->list);
+	devinfo->cmnd[uas_get_tag(cmnd) - 1] = NULL;
+	uas_free_unsubmitted_urbs(cmnd);
 	cmnd->scsi_done(cmnd);
 	return 0;
 }
@@ -318,63 +266,48 @@ static void uas_stat_cmplt(struct urb *urb)
 	struct iu *iu = urb->transfer_buffer;
 	struct Scsi_Host *shost = urb->context;
 	struct uas_dev_info *devinfo = (struct uas_dev_info *)shost->hostdata;
+	struct urb *data_in_urb = NULL;
+	struct urb *data_out_urb = NULL;
 	struct scsi_cmnd *cmnd;
 	struct uas_cmd_info *cmdinfo;
 	unsigned long flags;
-	u16 tag;
+	unsigned int idx;
+
+	spin_lock_irqsave(&devinfo->lock, flags);
+
+	if (devinfo->resetting)
+		goto out;
 
 	if (urb->status) {
-		if (urb->status == -ENOENT) {
-			dev_err(&urb->dev->dev, "stat urb: killed, stream %d\n",
-				urb->stream_id);
-		} else {
+		if (urb->status != -ENOENT && urb->status != -ECONNRESET) {
 			dev_err(&urb->dev->dev, "stat urb: status %d\n",
 				urb->status);
 		}
-		usb_free_urb(urb);
-		return;
+		goto out;
 	}
 
-	if (devinfo->resetting) {
-		usb_free_urb(urb);
-		return;
+	idx = be16_to_cpup(&iu->tag) - 1;
+	if (idx >= MAX_CMNDS || !devinfo->cmnd[idx]) {
+		dev_err(&urb->dev->dev,
+			"stat urb: no pending cmd for tag %d\n", idx + 1);
+		goto out;
 	}
 
-	spin_lock_irqsave(&devinfo->lock, flags);
-	tag = be16_to_cpup(&iu->tag) - 1;
-	if (tag == 0)
-		cmnd = devinfo->cmnd;
-	else
-		cmnd = scsi_host_find_tag(shost, tag - 1);
-
-	if (!cmnd) {
-		if (iu->iu_id == IU_ID_RESPONSE) {
-			if (!devinfo->running_task)
-				dev_warn(&urb->dev->dev,
-				    "stat urb: recv unexpected response iu\n");
-			/* store results for uas_eh_task_mgmt() */
-			memcpy(&devinfo->response, iu, sizeof(devinfo->response));
-		}
-		usb_free_urb(urb);
-		spin_unlock_irqrestore(&devinfo->lock, flags);
-		return;
+	cmnd = devinfo->cmnd[idx];
+	cmdinfo = (void *)&cmnd->SCp;
+
+	if (!(cmdinfo->state & COMMAND_INFLIGHT)) {
+		uas_log_cmd_state(cmnd, "unexpected status cmplt", 0);
+		goto out;
 	}
 
-	cmdinfo = (void *)&cmnd->SCp;
 	switch (iu->iu_id) {
 	case IU_ID_STATUS:
-		if (devinfo->cmnd == cmnd)
-			devinfo->cmnd = NULL;
-
-		if (urb->actual_length < 16)
-			devinfo->uas_sense_old = 1;
-		if (devinfo->uas_sense_old)
-			uas_sense_old(urb, cmnd);
-		else
-			uas_sense(urb, cmnd);
+		uas_sense(urb, cmnd);
 		if (cmnd->result != 0) {
 			/* cancel data transfers on error */
-			uas_unlink_data_urbs(devinfo, cmdinfo, &flags);
+			data_in_urb = usb_get_urb(cmdinfo->data_in_urb);
+			data_out_urb = usb_get_urb(cmdinfo->data_out_urb);
 		}
 		cmdinfo->state &= ~COMMAND_INFLIGHT;
 		uas_try_complete(cmnd, __func__);
@@ -382,7 +315,7 @@ static void uas_stat_cmplt(struct urb *urb)
 	case IU_ID_READ_READY:
 		if (!cmdinfo->data_in_urb ||
 				(cmdinfo->state & DATA_IN_URB_INFLIGHT)) {
-			scmd_printk(KERN_ERR, cmnd, "unexpected read rdy\n");
+			uas_log_cmd_state(cmnd, "unexpected read rdy", 0);
 			break;
 		}
 		uas_xfer_data(urb, cmnd, SUBMIT_DATA_IN_URB);
@@ -390,17 +323,37 @@ static void uas_stat_cmplt(struct urb *urb)
 	case IU_ID_WRITE_READY:
 		if (!cmdinfo->data_out_urb ||
 				(cmdinfo->state & DATA_OUT_URB_INFLIGHT)) {
-			scmd_printk(KERN_ERR, cmnd, "unexpected write rdy\n");
+			uas_log_cmd_state(cmnd, "unexpected write rdy", 0);
 			break;
 		}
 		uas_xfer_data(urb, cmnd, SUBMIT_DATA_OUT_URB);
 		break;
+	case IU_ID_RESPONSE:
+		uas_log_cmd_state(cmnd, "unexpected response iu",
+				  ((struct response_iu *)iu)->response_code);
+		/* Error, cancel data transfers */
+		data_in_urb = usb_get_urb(cmdinfo->data_in_urb);
+		data_out_urb = usb_get_urb(cmdinfo->data_out_urb);
+		cmdinfo->state &= ~COMMAND_INFLIGHT;
+		cmnd->result = DID_ERROR << 16;
+		uas_try_complete(cmnd, __func__);
+		break;
 	default:
-		scmd_printk(KERN_ERR, cmnd,
-			"Bogus IU (%d) received on status pipe\n", iu->iu_id);
+		uas_log_cmd_state(cmnd, "bogus IU", iu->iu_id);
 	}
+out:
 	usb_free_urb(urb);
 	spin_unlock_irqrestore(&devinfo->lock, flags);
+
+	/* Unlinking of data urbs must be done without holding the lock */
+	if (data_in_urb) {
+		usb_unlink_urb(data_in_urb);
+		usb_put_urb(data_in_urb);
+	}
+	if (data_out_urb) {
+		usb_unlink_urb(data_out_urb);
+		usb_put_urb(data_out_urb);
+	}
 }
 
 static void uas_data_cmplt(struct urb *urb)
@@ -412,57 +365,69 @@ static void uas_data_cmplt(struct urb *urb)
 	unsigned long flags;
 
 	spin_lock_irqsave(&devinfo->lock, flags);
+
 	if (cmdinfo->data_in_urb == urb) {
 		sdb = scsi_in(cmnd);
 		cmdinfo->state &= ~DATA_IN_URB_INFLIGHT;
+		cmdinfo->data_in_urb = NULL;
 	} else if (cmdinfo->data_out_urb == urb) {
 		sdb = scsi_out(cmnd);
 		cmdinfo->state &= ~DATA_OUT_URB_INFLIGHT;
+		cmdinfo->data_out_urb = NULL;
 	}
 	if (sdb == NULL) {
 		WARN_ON_ONCE(1);
-	} else if (urb->status) {
-		if (urb->status != -ECONNRESET) {
-			uas_log_cmd_state(cmnd, __func__);
-			scmd_printk(KERN_ERR, cmnd,
-				"data cmplt err %d stream %d\n",
-				urb->status, urb->stream_id);
-		}
+		goto out;
+	}
+
+	if (devinfo->resetting)
+		goto out;
+
+	/* Data urbs should not complete before the cmd urb is submitted */
+	if (cmdinfo->state & SUBMIT_CMD_URB) {
+		uas_log_cmd_state(cmnd, "unexpected data cmplt", 0);
+		goto out;
+	}
+
+	if (urb->status) {
+		if (urb->status != -ENOENT && urb->status != -ECONNRESET)
+			uas_log_cmd_state(cmnd, "data cmplt err", urb->status);
 		/* error: no data transfered */
 		sdb->resid = sdb->length;
 	} else {
 		sdb->resid = sdb->length - urb->actual_length;
 	}
 	uas_try_complete(cmnd, __func__);
+out:
+	usb_free_urb(urb);
 	spin_unlock_irqrestore(&devinfo->lock, flags);
 }
 
 static void uas_cmd_cmplt(struct urb *urb)
 {
-	struct scsi_cmnd *cmnd = urb->context;
+	if (urb->status)
+		dev_err(&urb->dev->dev, "cmd cmplt err %d\n", urb->status);
 
-	if (urb->status) {
-		uas_log_cmd_state(cmnd, __func__);
-		scmd_printk(KERN_ERR, cmnd, "cmd cmplt err %d\n", urb->status);
-	}
 	usb_free_urb(urb);
 }
 
 static struct urb *uas_alloc_data_urb(struct uas_dev_info *devinfo, gfp_t gfp,
-				      unsigned int pipe, u16 stream_id,
 				      struct scsi_cmnd *cmnd,
 				      enum dma_data_direction dir)
 {
 	struct usb_device *udev = devinfo->udev;
+	struct uas_cmd_info *cmdinfo = (void *)&cmnd->SCp;
 	struct urb *urb = usb_alloc_urb(0, gfp);
 	struct scsi_data_buffer *sdb = (dir == DMA_FROM_DEVICE)
 		? scsi_in(cmnd) : scsi_out(cmnd);
+	unsigned int pipe = (dir == DMA_FROM_DEVICE)
+		? devinfo->data_in_pipe : devinfo->data_out_pipe;
 
 	if (!urb)
 		goto out;
 	usb_fill_bulk_urb(urb, udev, pipe, NULL, sdb->length,
 			  uas_data_cmplt, cmnd);
-	urb->stream_id = stream_id;
+	urb->stream_id = cmdinfo->stream;
 	urb->num_sgs = udev->bus->sg_tablesize ? sdb->table.nents : 0;
 	urb->sg = sdb->table.sgl;
  out:
@@ -470,9 +435,10 @@ static struct urb *uas_alloc_data_urb(struct uas_dev_info *devinfo, gfp_t gfp,
 }
 
 static struct urb *uas_alloc_sense_urb(struct uas_dev_info *devinfo, gfp_t gfp,
-				       struct Scsi_Host *shost, u16 stream_id)
+				       struct scsi_cmnd *cmnd)
 {
 	struct usb_device *udev = devinfo->udev;
+	struct uas_cmd_info *cmdinfo = (void *)&cmnd->SCp;
 	struct urb *urb = usb_alloc_urb(0, gfp);
 	struct sense_iu *iu;
 
@@ -484,8 +450,8 @@ static struct urb *uas_alloc_sense_urb(struct uas_dev_info *devinfo, gfp_t gfp,
 		goto free;
 
 	usb_fill_bulk_urb(urb, udev, devinfo->status_pipe, iu, sizeof(*iu),
-						uas_stat_cmplt, shost);
-	urb->stream_id = stream_id;
+			  uas_stat_cmplt, cmnd->device->host);
+	urb->stream_id = cmdinfo->stream;
 	urb->transfer_flags |= URB_FREE_BUFFER;
  out:
 	return urb;
@@ -515,17 +481,14 @@ static struct urb *uas_alloc_cmd_urb(struct uas_dev_info *devinfo, gfp_t gfp,
 		goto free;
 
 	iu->iu_id = IU_ID_COMMAND;
-	if (blk_rq_tagged(cmnd->request))
-		iu->tag = cpu_to_be16(cmnd->request->tag + 2);
-	else
-		iu->tag = cpu_to_be16(1);
+	iu->tag = cpu_to_be16(uas_get_tag(cmnd));
 	iu->prio_attr = UAS_SIMPLE_TAG;
 	iu->len = len;
 	int_to_scsilun(sdev->lun, &iu->lun);
 	memcpy(iu->cdb, cmnd->cmnd, cmnd->cmd_len);
 
 	usb_fill_bulk_urb(urb, udev, devinfo->cmd_pipe, iu, sizeof(*iu) + len,
-							uas_cmd_cmplt, cmnd);
+							uas_cmd_cmplt, NULL);
 	urb->transfer_flags |= URB_FREE_BUFFER;
  out:
 	return urb;
@@ -534,81 +497,26 @@ static struct urb *uas_alloc_cmd_urb(struct uas_dev_info *devinfo, gfp_t gfp,
 	return NULL;
 }
 
-static int uas_submit_task_urb(struct scsi_cmnd *cmnd, gfp_t gfp,
-			       u8 function, u16 stream_id)
-{
-	struct uas_dev_info *devinfo = (void *)cmnd->device->hostdata;
-	struct usb_device *udev = devinfo->udev;
-	struct urb *urb = usb_alloc_urb(0, gfp);
-	struct task_mgmt_iu *iu;
-	int err = -ENOMEM;
-
-	if (!urb)
-		goto err;
-
-	iu = kzalloc(sizeof(*iu), gfp);
-	if (!iu)
-		goto err;
-
-	iu->iu_id = IU_ID_TASK_MGMT;
-	iu->tag = cpu_to_be16(stream_id);
-	int_to_scsilun(cmnd->device->lun, &iu->lun);
-
-	iu->function = function;
-	switch (function) {
-	case TMF_ABORT_TASK:
-		if (blk_rq_tagged(cmnd->request))
-			iu->task_tag = cpu_to_be16(cmnd->request->tag + 2);
-		else
-			iu->task_tag = cpu_to_be16(1);
-		break;
-	}
-
-	usb_fill_bulk_urb(urb, udev, devinfo->cmd_pipe, iu, sizeof(*iu),
-			  uas_cmd_cmplt, cmnd);
-	urb->transfer_flags |= URB_FREE_BUFFER;
-
-	usb_anchor_urb(urb, &devinfo->cmd_urbs);
-	err = usb_submit_urb(urb, gfp);
-	if (err) {
-		usb_unanchor_urb(urb);
-		uas_log_cmd_state(cmnd, __func__);
-		scmd_printk(KERN_ERR, cmnd, "task submission err %d\n", err);
-		goto err;
-	}
-
-	return 0;
-
-err:
-	usb_free_urb(urb);
-	return err;
-}
-
 /*
  * Why should I request the Status IU before sending the Command IU?  Spec
  * says to, but also says the device may receive them in any order.  Seems
  * daft to me.
  */
 
-static struct urb *uas_submit_sense_urb(struct scsi_cmnd *cmnd,
-					gfp_t gfp, unsigned int stream)
+static struct urb *uas_submit_sense_urb(struct scsi_cmnd *cmnd, gfp_t gfp)
 {
-	struct Scsi_Host *shost = cmnd->device->host;
-	struct uas_dev_info *devinfo = (struct uas_dev_info *)shost->hostdata;
+	struct uas_dev_info *devinfo = cmnd->device->hostdata;
 	struct urb *urb;
 	int err;
 
-	urb = uas_alloc_sense_urb(devinfo, gfp, shost, stream);
+	urb = uas_alloc_sense_urb(devinfo, gfp, cmnd);
 	if (!urb)
 		return NULL;
 	usb_anchor_urb(urb, &devinfo->sense_urbs);
 	err = usb_submit_urb(urb, gfp);
 	if (err) {
 		usb_unanchor_urb(urb);
-		uas_log_cmd_state(cmnd, __func__);
-		shost_printk(KERN_INFO, shost,
-			     "sense urb submission error %d stream %d\n",
-			     err, stream);
+		uas_log_cmd_state(cmnd, "sense submit err", err);
 		usb_free_urb(urb);
 		return NULL;
 	}
@@ -622,9 +530,9 @@ static int uas_submit_urbs(struct scsi_cmnd *cmnd,
 	struct urb *urb;
 	int err;
 
-	WARN_ON_ONCE(!spin_is_locked(&devinfo->lock));
+	lockdep_assert_held(&devinfo->lock);
 	if (cmdinfo->state & SUBMIT_STATUS_URB) {
-		urb = uas_submit_sense_urb(cmnd, gfp, cmdinfo->stream);
+		urb = uas_submit_sense_urb(cmnd, gfp);
 		if (!urb)
 			return SCSI_MLQUEUE_DEVICE_BUSY;
 		cmdinfo->state &= ~SUBMIT_STATUS_URB;
@@ -632,8 +540,7 @@ static int uas_submit_urbs(struct scsi_cmnd *cmnd,
 
 	if (cmdinfo->state & ALLOC_DATA_IN_URB) {
 		cmdinfo->data_in_urb = uas_alloc_data_urb(devinfo, gfp,
-					devinfo->data_in_pipe, cmdinfo->stream,
-					cmnd, DMA_FROM_DEVICE);
+							cmnd, DMA_FROM_DEVICE);
 		if (!cmdinfo->data_in_urb)
 			return SCSI_MLQUEUE_DEVICE_BUSY;
 		cmdinfo->state &= ~ALLOC_DATA_IN_URB;
@@ -644,10 +551,7 @@ static int uas_submit_urbs(struct scsi_cmnd *cmnd,
 		err = usb_submit_urb(cmdinfo->data_in_urb, gfp);
 		if (err) {
 			usb_unanchor_urb(cmdinfo->data_in_urb);
-			uas_log_cmd_state(cmnd, __func__);
-			scmd_printk(KERN_INFO, cmnd,
-				"data in urb submission error %d stream %d\n",
-				err, cmdinfo->data_in_urb->stream_id);
+			uas_log_cmd_state(cmnd, "data in submit err", err);
 			return SCSI_MLQUEUE_DEVICE_BUSY;
 		}
 		cmdinfo->state &= ~SUBMIT_DATA_IN_URB;
@@ -656,8 +560,7 @@ static int uas_submit_urbs(struct scsi_cmnd *cmnd,
 
 	if (cmdinfo->state & ALLOC_DATA_OUT_URB) {
 		cmdinfo->data_out_urb = uas_alloc_data_urb(devinfo, gfp,
-					devinfo->data_out_pipe, cmdinfo->stream,
-					cmnd, DMA_TO_DEVICE);
+							cmnd, DMA_TO_DEVICE);
 		if (!cmdinfo->data_out_urb)
 			return SCSI_MLQUEUE_DEVICE_BUSY;
 		cmdinfo->state &= ~ALLOC_DATA_OUT_URB;
@@ -668,10 +571,7 @@ static int uas_submit_urbs(struct scsi_cmnd *cmnd,
 		err = usb_submit_urb(cmdinfo->data_out_urb, gfp);
 		if (err) {
 			usb_unanchor_urb(cmdinfo->data_out_urb);
-			uas_log_cmd_state(cmnd, __func__);
-			scmd_printk(KERN_INFO, cmnd,
-				"data out urb submission error %d stream %d\n",
-				err, cmdinfo->data_out_urb->stream_id);
+			uas_log_cmd_state(cmnd, "data out submit err", err);
 			return SCSI_MLQUEUE_DEVICE_BUSY;
 		}
 		cmdinfo->state &= ~SUBMIT_DATA_OUT_URB;
@@ -690,9 +590,7 @@ static int uas_submit_urbs(struct scsi_cmnd *cmnd,
 		err = usb_submit_urb(cmdinfo->cmd_urb, gfp);
 		if (err) {
 			usb_unanchor_urb(cmdinfo->cmd_urb);
-			uas_log_cmd_state(cmnd, __func__);
-			scmd_printk(KERN_INFO, cmnd,
-				    "cmd urb submission error %d\n", err);
+			uas_log_cmd_state(cmnd, "cmd submit err", err);
 			return SCSI_MLQUEUE_DEVICE_BUSY;
 		}
 		cmdinfo->cmd_urb = NULL;
@@ -710,10 +608,24 @@ static int uas_queuecommand_lck(struct scsi_cmnd *cmnd,
 	struct uas_dev_info *devinfo = sdev->hostdata;
 	struct uas_cmd_info *cmdinfo = (void *)&cmnd->SCp;
 	unsigned long flags;
+	unsigned int stream;
 	int err;
 
 	BUILD_BUG_ON(sizeof(struct uas_cmd_info) > sizeof(struct scsi_pointer));
 
+	/* Re-check scsi_block_requests now that we've the host-lock */
+	if (cmnd->device->host->host_self_blocked)
+		return SCSI_MLQUEUE_DEVICE_BUSY;
+
+	if ((devinfo->flags & US_FL_NO_ATA_1X) &&
+			(cmnd->cmnd[0] == ATA_12 || cmnd->cmnd[0] == ATA_16)) {
+		memcpy(cmnd->sense_buffer, usb_stor_sense_invalidCDB,
+		       sizeof(usb_stor_sense_invalidCDB));
+		cmnd->result = SAM_STAT_CHECK_CONDITION;
+		cmnd->scsi_done(cmnd);
+		return 0;
+	}
+
 	spin_lock_irqsave(&devinfo->lock, flags);
 
 	if (devinfo->resetting) {
@@ -723,24 +635,17 @@ static int uas_queuecommand_lck(struct scsi_cmnd *cmnd,
 		return 0;
 	}
 
-	if (devinfo->cmnd) {
+	stream = uas_get_tag(cmnd);
+	if (devinfo->cmnd[stream - 1]) {
 		spin_unlock_irqrestore(&devinfo->lock, flags);
 		return SCSI_MLQUEUE_DEVICE_BUSY;
 	}
 
-	memset(cmdinfo, 0, sizeof(*cmdinfo));
-
-	if (blk_rq_tagged(cmnd->request)) {
-		cmdinfo->stream = cmnd->request->tag + 2;
-	} else {
-		devinfo->cmnd = cmnd;
-		cmdinfo->stream = 1;
-	}
-
 	cmnd->scsi_done = done;
 
-	cmdinfo->state = SUBMIT_STATUS_URB |
-			ALLOC_CMD_URB | SUBMIT_CMD_URB;
+	memset(cmdinfo, 0, sizeof(*cmdinfo));
+	cmdinfo->stream = stream;
+	cmdinfo->state = SUBMIT_STATUS_URB | ALLOC_CMD_URB | SUBMIT_CMD_URB;
 
 	switch (cmnd->sc_data_direction) {
 	case DMA_FROM_DEVICE:
@@ -769,123 +674,54 @@ static int uas_queuecommand_lck(struct scsi_cmnd *cmnd,
 		uas_add_work(cmdinfo);
 	}
 
-	list_add_tail(&cmdinfo->list, &devinfo->inflight_list);
+	devinfo->cmnd[stream - 1] = cmnd;
 	spin_unlock_irqrestore(&devinfo->lock, flags);
 	return 0;
 }
 
 static DEF_SCSI_QCMD(uas_queuecommand)
 
-static int uas_eh_task_mgmt(struct scsi_cmnd *cmnd,
-			    const char *fname, u8 function)
+/*
+ * For now we do not support actually sending an abort to the device, so
+ * this eh always fails. Still we must define it to make sure that we've
+ * dropped all references to the cmnd in question once this function exits.
+ */
+static int uas_eh_abort_handler(struct scsi_cmnd *cmnd)
 {
-	struct Scsi_Host *shost = cmnd->device->host;
-	struct uas_dev_info *devinfo = (struct uas_dev_info *)shost->hostdata;
-	u16 tag = devinfo->qdepth;
+	struct uas_cmd_info *cmdinfo = (void *)&cmnd->SCp;
+	struct uas_dev_info *devinfo = (void *)cmnd->device->hostdata;
+	struct urb *data_in_urb = NULL;
+	struct urb *data_out_urb = NULL;
 	unsigned long flags;
-	struct urb *sense_urb;
-	int result = SUCCESS;
 
 	spin_lock_irqsave(&devinfo->lock, flags);
 
-	if (devinfo->resetting) {
-		spin_unlock_irqrestore(&devinfo->lock, flags);
-		return FAILED;
-	}
+	uas_log_cmd_state(cmnd, __func__, 0);
 
-	if (devinfo->running_task) {
-		shost_printk(KERN_INFO, shost,
-			     "%s: %s: error already running a task\n",
-			     __func__, fname);
-		spin_unlock_irqrestore(&devinfo->lock, flags);
-		return FAILED;
-	}
+	/* Ensure that try_complete does not call scsi_done */
+	cmdinfo->state |= COMMAND_ABORTED;
 
-	devinfo->running_task = 1;
-	memset(&devinfo->response, 0, sizeof(devinfo->response));
-	sense_urb = uas_submit_sense_urb(cmnd, GFP_ATOMIC,
-					 devinfo->use_streams ? tag : 0);
-	if (!sense_urb) {
-		shost_printk(KERN_INFO, shost,
-			     "%s: %s: submit sense urb failed\n",
-			     __func__, fname);
-		devinfo->running_task = 0;
-		spin_unlock_irqrestore(&devinfo->lock, flags);
-		return FAILED;
-	}
-	if (uas_submit_task_urb(cmnd, GFP_ATOMIC, function, tag)) {
-		shost_printk(KERN_INFO, shost,
-			     "%s: %s: submit task mgmt urb failed\n",
-			     __func__, fname);
-		devinfo->running_task = 0;
-		spin_unlock_irqrestore(&devinfo->lock, flags);
-		usb_kill_urb(sense_urb);
-		return FAILED;
-	}
-	spin_unlock_irqrestore(&devinfo->lock, flags);
+	/* Drop all refs to this cmnd, kill data urbs to break their ref */
+	devinfo->cmnd[uas_get_tag(cmnd) - 1] = NULL;
+	if (cmdinfo->state & DATA_IN_URB_INFLIGHT)
+		data_in_urb = usb_get_urb(cmdinfo->data_in_urb);
+	if (cmdinfo->state & DATA_OUT_URB_INFLIGHT)
+		data_out_urb = usb_get_urb(cmdinfo->data_out_urb);
 
-	if (usb_wait_anchor_empty_timeout(&devinfo->sense_urbs, 3000) == 0) {
-		/*
-		 * Note we deliberately do not clear running_task here. If we
-		 * allow new tasks to be submitted, there is no way to figure
-		 * out if a received response_iu is for the failed task or for
-		 * the new one. A bus-reset will eventually clear running_task.
-		 */
-		shost_printk(KERN_INFO, shost,
-			     "%s: %s timed out\n", __func__, fname);
-		return FAILED;
-	}
+	uas_free_unsubmitted_urbs(cmnd);
 
-	spin_lock_irqsave(&devinfo->lock, flags);
-	devinfo->running_task = 0;
-	if (be16_to_cpu(devinfo->response.tag) != tag) {
-		shost_printk(KERN_INFO, shost,
-			     "%s: %s failed (wrong tag %d/%d)\n", __func__,
-			     fname, be16_to_cpu(devinfo->response.tag), tag);
-		result = FAILED;
-	} else if (devinfo->response.response_code != RC_TMF_COMPLETE) {
-		shost_printk(KERN_INFO, shost,
-			     "%s: %s failed (rc 0x%x)\n", __func__,
-			     fname, devinfo->response.response_code);
-		result = FAILED;
-	}
 	spin_unlock_irqrestore(&devinfo->lock, flags);
 
-	return result;
-}
-
-static int uas_eh_abort_handler(struct scsi_cmnd *cmnd)
-{
-	struct uas_cmd_info *cmdinfo = (void *)&cmnd->SCp;
-	struct uas_dev_info *devinfo = (void *)cmnd->device->hostdata;
-	unsigned long flags;
-	int ret;
-
-	spin_lock_irqsave(&devinfo->lock, flags);
-
-	if (devinfo->resetting) {
-		spin_unlock_irqrestore(&devinfo->lock, flags);
-		return FAILED;
+	if (data_in_urb) {
+		usb_kill_urb(data_in_urb);
+		usb_put_urb(data_in_urb);
 	}
-
-	uas_mark_cmd_dead(devinfo, cmdinfo, DID_ABORT, __func__);
-	if (cmdinfo->state & COMMAND_INFLIGHT) {
-		spin_unlock_irqrestore(&devinfo->lock, flags);
-		ret = uas_eh_task_mgmt(cmnd, "ABORT TASK", TMF_ABORT_TASK);
-	} else {
-		uas_unlink_data_urbs(devinfo, cmdinfo, &flags);
-		uas_try_complete(cmnd, __func__);
-		spin_unlock_irqrestore(&devinfo->lock, flags);
-		ret = SUCCESS;
+	if (data_out_urb) {
+		usb_kill_urb(data_out_urb);
+		usb_put_urb(data_out_urb);
 	}
-	return ret;
-}
 
-static int uas_eh_device_reset_handler(struct scsi_cmnd *cmnd)
-{
-	sdev_printk(KERN_INFO, cmnd->device, "%s\n", __func__);
-	return uas_eh_task_mgmt(cmnd, "LOGICAL UNIT RESET",
-				TMF_LOGICAL_UNIT_RESET);
+	return FAILED;
 }
 
 static int uas_eh_bus_reset_handler(struct scsi_cmnd *cmnd)
@@ -893,6 +729,7 @@ static int uas_eh_bus_reset_handler(struct scsi_cmnd *cmnd)
 	struct scsi_device *sdev = cmnd->device;
 	struct uas_dev_info *devinfo = sdev->hostdata;
 	struct usb_device *udev = devinfo->udev;
+	unsigned long flags;
 	int err;
 
 	err = usb_lock_device_for_reset(udev, devinfo->intf);
@@ -903,19 +740,27 @@ static int uas_eh_bus_reset_handler(struct scsi_cmnd *cmnd)
 	}
 
 	shost_printk(KERN_INFO, sdev->host, "%s start\n", __func__);
+
+	spin_lock_irqsave(&devinfo->lock, flags);
 	devinfo->resetting = 1;
-	uas_abort_inflight(devinfo, DID_RESET, __func__);
+	spin_unlock_irqrestore(&devinfo->lock, flags);
+
 	usb_kill_anchored_urbs(&devinfo->cmd_urbs);
 	usb_kill_anchored_urbs(&devinfo->sense_urbs);
 	usb_kill_anchored_urbs(&devinfo->data_urbs);
-	uas_zap_dead(devinfo);
+	uas_zap_pending(devinfo, DID_RESET);
+
 	err = usb_reset_device(udev);
+
+	spin_lock_irqsave(&devinfo->lock, flags);
 	devinfo->resetting = 0;
+	spin_unlock_irqrestore(&devinfo->lock, flags);
 
 	usb_unlock_device(udev);
 
 	if (err) {
-		shost_printk(KERN_INFO, sdev->host, "%s FAILED\n", __func__);
+		shost_printk(KERN_INFO, sdev->host, "%s FAILED err %d\n",
+			     __func__, err);
 		return FAILED;
 	}
 
@@ -950,6 +795,10 @@ static int uas_slave_alloc(struct scsi_device *sdev)
 static int uas_slave_configure(struct scsi_device *sdev)
 {
 	struct uas_dev_info *devinfo = sdev->hostdata;
+
+	if (devinfo->flags & US_FL_NO_REPORT_OPCODES)
+		sdev->no_report_opcodes = 1;
+
 	scsi_set_tag_type(sdev, MSG_ORDERED_TAG);
 	scsi_activate_tcq(sdev, devinfo->qdepth - 2);
 	return 0;
@@ -962,7 +811,6 @@ static struct scsi_host_template uas_host_template = {
 	.slave_alloc = uas_slave_alloc,
 	.slave_configure = uas_slave_configure,
 	.eh_abort_handler = uas_eh_abort_handler,
-	.eh_device_reset_handler = uas_eh_device_reset_handler,
 	.eh_bus_reset_handler = uas_eh_bus_reset_handler,
 	.can_queue = 65536,	/* Is there a limit on the _host_ ? */
 	.this_id = -1,
@@ -989,8 +837,6 @@ static struct usb_device_id uas_usb_ids[] = {
 #	include "unusual_uas.h"
 	{ USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, USB_SC_SCSI, USB_PR_BULK) },
 	{ USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, USB_SC_SCSI, USB_PR_UAS) },
-	/* 0xaa is a prototype device I happen to have access to */
-	{ USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, USB_SC_SCSI, 0xaa) },
 	{ }
 };
 MODULE_DEVICE_TABLE(usb, uas_usb_ids);
@@ -1016,9 +862,6 @@ static int uas_configure_endpoints(struct uas_dev_info *devinfo)
 	struct usb_device *udev = devinfo->udev;
 	int r;
 
-	devinfo->uas_sense_old = 0;
-	devinfo->cmnd = NULL;
-
 	r = uas_find_endpoints(devinfo->intf->cur_altsetting, eps);
 	if (r)
 		return r;
@@ -1032,12 +875,12 @@ static int uas_configure_endpoints(struct uas_dev_info *devinfo)
 	devinfo->data_out_pipe = usb_sndbulkpipe(udev,
 					    usb_endpoint_num(&eps[3]->desc));
 
-	if (udev->speed != USB_SPEED_SUPER) {
+	if (udev->speed < USB_SPEED_SUPER) {
 		devinfo->qdepth = 32;
 		devinfo->use_streams = 0;
 	} else {
 		devinfo->qdepth = usb_alloc_streams(devinfo->intf, eps + 1,
-						    3, 256, GFP_NOIO);
+						    3, MAX_CMNDS, GFP_NOIO);
 		if (devinfo->qdepth < 0)
 			return devinfo->qdepth;
 		devinfo->use_streams = 1;
@@ -1085,15 +928,14 @@ static int uas_probe(struct usb_interface *intf, const struct usb_device_id *id)
 	devinfo->intf = intf;
 	devinfo->udev = udev;
 	devinfo->resetting = 0;
-	devinfo->running_task = 0;
 	devinfo->shutdown = 0;
+	devinfo->flags = id->driver_info;
+	usb_stor_adjust_quirks(udev, &devinfo->flags);
 	init_usb_anchor(&devinfo->cmd_urbs);
 	init_usb_anchor(&devinfo->sense_urbs);
 	init_usb_anchor(&devinfo->data_urbs);
 	spin_lock_init(&devinfo->lock);
 	INIT_WORK(&devinfo->work, uas_do_work);
-	INIT_LIST_HEAD(&devinfo->inflight_list);
-	INIT_LIST_HEAD(&devinfo->dead_list);
 
 	result = uas_configure_endpoints(devinfo);
 	if (result)
@@ -1121,6 +963,54 @@ set_alt0:
 	return result;
 }
 
+static int uas_cmnd_list_empty(struct uas_dev_info *devinfo)
+{
+	unsigned long flags;
+	int i, r = 1;
+
+	spin_lock_irqsave(&devinfo->lock, flags);
+
+	for (i = 0; i < devinfo->qdepth; i++) {
+		if (devinfo->cmnd[i]) {
+			r = 0; /* Not empty */
+			break;
+		}
+	}
+
+	spin_unlock_irqrestore(&devinfo->lock, flags);
+
+	return r;
+}
+
+/*
+ * Wait for any pending cmnds to complete, on usb-2 sense_urbs may temporarily
+ * get empty while there still is more work to do due to sense-urbs completing
+ * with a READ/WRITE_READY iu code, so keep waiting until the list gets empty.
+ */
+static int uas_wait_for_pending_cmnds(struct uas_dev_info *devinfo)
+{
+	unsigned long start_time;
+	int r;
+
+	start_time = jiffies;
+	do {
+		flush_work(&devinfo->work);
+
+		r = usb_wait_anchor_empty_timeout(&devinfo->sense_urbs, 5000);
+		if (r == 0)
+			return -ETIME;
+
+		r = usb_wait_anchor_empty_timeout(&devinfo->data_urbs, 500);
+		if (r == 0)
+			return -ETIME;
+
+		if (time_after(jiffies, start_time + 5 * HZ))
+			return -ETIME;
+	} while (!uas_cmnd_list_empty(devinfo));
+
+	return 0;
+}
+
 static int uas_pre_reset(struct usb_interface *intf)
 {
 	struct Scsi_Host *shost = usb_get_intfdata(intf);
@@ -1135,10 +1025,9 @@ static int uas_pre_reset(struct usb_interface *intf)
 	scsi_block_requests(shost);
 	spin_unlock_irqrestore(shost->host_lock, flags);
 
-	/* Wait for any pending requests to complete */
-	flush_work(&devinfo->work);
-	if (usb_wait_anchor_empty_timeout(&devinfo->sense_urbs, 5000) == 0) {
+	if (uas_wait_for_pending_cmnds(devinfo) != 0) {
 		shost_printk(KERN_ERR, shost, "%s: timed out\n", __func__);
+		scsi_unblock_requests(shost);
 		return 1;
 	}
 
@@ -1152,13 +1041,16 @@ static int uas_post_reset(struct usb_interface *intf)
 	struct Scsi_Host *shost = usb_get_intfdata(intf);
 	struct uas_dev_info *devinfo = (struct uas_dev_info *)shost->hostdata;
 	unsigned long flags;
+	int err;
 
 	if (devinfo->shutdown)
 		return 0;
 
-	if (uas_configure_endpoints(devinfo) != 0) {
+	err = uas_configure_endpoints(devinfo);
+	if (err) {
 		shost_printk(KERN_ERR, shost,
-			     "%s: alloc streams error after reset", __func__);
+			     "%s: alloc streams error %d after reset",
+			     __func__, err);
 		return 1;
 	}
 
@@ -1176,9 +1068,7 @@ static int uas_suspend(struct usb_interface *intf, pm_message_t message)
 	struct Scsi_Host *shost = usb_get_intfdata(intf);
 	struct uas_dev_info *devinfo = (struct uas_dev_info *)shost->hostdata;
 
-	/* Wait for any pending requests to complete */
-	flush_work(&devinfo->work);
-	if (usb_wait_anchor_empty_timeout(&devinfo->sense_urbs, 5000) == 0) {
+	if (uas_wait_for_pending_cmnds(devinfo) != 0) {
 		shost_printk(KERN_ERR, shost, "%s: timed out\n", __func__);
 		return -ETIME;
 	}
@@ -1196,10 +1086,13 @@ static int uas_reset_resume(struct usb_interface *intf)
 	struct Scsi_Host *shost = usb_get_intfdata(intf);
 	struct uas_dev_info *devinfo = (struct uas_dev_info *)shost->hostdata;
 	unsigned long flags;
+	int err;
 
-	if (uas_configure_endpoints(devinfo) != 0) {
+	err = uas_configure_endpoints(devinfo);
+	if (err) {
 		shost_printk(KERN_ERR, shost,
-			     "%s: alloc streams error after reset", __func__);
+			     "%s: alloc streams error %d after reset",
+			     __func__, err);
 		return -EIO;
 	}
 
@@ -1214,14 +1107,18 @@ static void uas_disconnect(struct usb_interface *intf)
 {
 	struct Scsi_Host *shost = usb_get_intfdata(intf);
 	struct uas_dev_info *devinfo = (struct uas_dev_info *)shost->hostdata;
+	unsigned long flags;
 
+	spin_lock_irqsave(&devinfo->lock, flags);
 	devinfo->resetting = 1;
+	spin_unlock_irqrestore(&devinfo->lock, flags);
+
 	cancel_work_sync(&devinfo->work);
-	uas_abort_inflight(devinfo, DID_NO_CONNECT, __func__);
 	usb_kill_anchored_urbs(&devinfo->cmd_urbs);
 	usb_kill_anchored_urbs(&devinfo->sense_urbs);
 	usb_kill_anchored_urbs(&devinfo->data_urbs);
-	uas_zap_dead(devinfo);
+	uas_zap_pending(devinfo, DID_NO_CONNECT);
+
 	scsi_remove_host(shost);
 	uas_free_streams(devinfo);
 	scsi_host_put(shost);
diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h
index 4a5c68a47e46..11c7a9676441 100644
--- a/drivers/usb/storage/unusual_devs.h
+++ b/drivers/usb/storage/unusual_devs.h
@@ -492,18 +492,24 @@ UNUSUAL_DEV(  0x04e6, 0x000a, 0x0200, 0x0200,
 		"eUSB CompactFlash Adapter",
 		USB_SC_8020, USB_PR_CB, NULL, 0),
 
-UNUSUAL_DEV(  0x04e6, 0x000B, 0x0100, 0x0100,
+UNUSUAL_DEV(  0x04e6, 0x000b, 0x0100, 0x0100,
 		"Shuttle",
 		"eUSCSI Bridge",
 		USB_SC_SCSI, USB_PR_BULK, usb_stor_euscsi_init,
 		US_FL_SCM_MULT_TARG ), 
 
-UNUSUAL_DEV(  0x04e6, 0x000C, 0x0100, 0x0100,
+UNUSUAL_DEV(  0x04e6, 0x000c, 0x0100, 0x0100,
 		"Shuttle",
 		"eUSCSI Bridge",
 		USB_SC_SCSI, USB_PR_BULK, usb_stor_euscsi_init,
 		US_FL_SCM_MULT_TARG ),
 
+UNUSUAL_DEV(  0x04e6, 0x000f, 0x0000, 0x9999,
+		"SCM Microsystems",
+		"eUSB SCSI Adapter (Bus Powered)",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_euscsi_init,
+		US_FL_SCM_MULT_TARG ),
+
 UNUSUAL_DEV(  0x04e6, 0x0101, 0x0200, 0x0200,
 		"Shuttle",
 		"CD-RW Device",
@@ -1099,6 +1105,13 @@ UNUSUAL_DEV( 0x0840, 0x0085, 0x0001, 0x0001,
 		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_FIX_CAPACITY),
 
+/* Supplied with some Castlewood ORB removable drives */
+UNUSUAL_DEV(  0x084b, 0xa001, 0x0000, 0x9999,
+		"Castlewood Systems",
+		"USB to SCSI cable",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_euscsi_init,
+		US_FL_SCM_MULT_TARG ),
+
 /* Entry and supporting patch by Theodore Kilgore <kilgota@auburn.edu>.
  * Flag will support Bulk devices which use a standards-violating 32-byte
  * Command Block Wrapper. Here, the "DC2MEGA" cameras (several brands) with
@@ -2063,6 +2076,13 @@ UNUSUAL_DEV( 0x1e74, 0x4621, 0x0000, 0x0000,
 		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_BULK_IGNORE_TAG | US_FL_MAX_SECTORS_64 ),
 
+/* Supplied with some Castlewood ORB removable drives */
+UNUSUAL_DEV(  0x2027, 0xa001, 0x0000, 0x9999,
+		"Double-H Technology",
+		"USB to SCSI Intelligent Cable",
+		USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_euscsi_init,
+		US_FL_SCM_MULT_TARG ),
+
 UNUSUAL_DEV( 0x2116, 0x0320, 0x0001, 0x0001,
 		"ST",
 		"2A",
diff --git a/drivers/usb/storage/unusual_uas.h b/drivers/usb/storage/unusual_uas.h
index 7244444df8ee..8511b54a65d9 100644
--- a/drivers/usb/storage/unusual_uas.h
+++ b/drivers/usb/storage/unusual_uas.h
@@ -40,13 +40,38 @@
  * and don't forget to CC: the USB development list <linux-usb@vger.kernel.org>
  */
 
-/*
- * This is an example entry for the US_FL_IGNORE_UAS flag. Once we have an
- * actual entry using US_FL_IGNORE_UAS this entry should be removed.
- *
- * UNUSUAL_DEV(  0xabcd, 0x1234, 0x0100, 0x0100,
- *		"Example",
- *		"Storage with broken UAS",
- *		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
- *		US_FL_IGNORE_UAS),
- */
+/* https://bugzilla.kernel.org/show_bug.cgi?id=79511 */
+UNUSUAL_DEV(0x0bc2, 0x2312, 0x0000, 0x9999,
+		"Seagate",
+		"Expansion Desk",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+		US_FL_NO_ATA_1X),
+
+/* https://bbs.archlinux.org/viewtopic.php?id=183190 */
+UNUSUAL_DEV(0x0bc2, 0x3312, 0x0000, 0x9999,
+		"Seagate",
+		"Expansion Desk",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+		US_FL_NO_ATA_1X),
+
+/* https://bbs.archlinux.org/viewtopic.php?id=183190 */
+UNUSUAL_DEV(0x0bc2, 0xab20, 0x0000, 0x9999,
+		"Seagate",
+		"Backup+ BK",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+		US_FL_NO_ATA_1X),
+
+/* Reported-by: Claudio Bizzarri <claudio.bizzarri@gmail.com> */
+UNUSUAL_DEV(0x152d, 0x0567, 0x0000, 0x9999,
+		"JMicron",
+		"JMS567",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+		US_FL_NO_REPORT_OPCODES),
+
+/* Most ASM1051 based devices have issues with uas, blacklist them all */
+/* Reported-by: Hans de Goede <hdegoede@redhat.com> */
+UNUSUAL_DEV(0x174c, 0x5106, 0x0000, 0x9999,
+		"ASMedia",
+		"ASM1051",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+		US_FL_IGNORE_UAS),
diff --git a/drivers/usb/storage/usb.c b/drivers/usb/storage/usb.c
index bf3f8e2de046..9d66ce62542e 100644
--- a/drivers/usb/storage/usb.c
+++ b/drivers/usb/storage/usb.c
@@ -98,7 +98,7 @@ MODULE_PARM_DESC(quirks, "supplemental list of device IDs and their quirks");
 /* The vendor name should be kept at eight characters or less, and
  * the product name should be kept at 16 characters or less. If a device
  * has the US_FL_FIX_INQUIRY flag, then the vendor and product names
- * normally generated by a device thorugh the INQUIRY response will be
+ * normally generated by a device through the INQUIRY response will be
  * taken from this list, and this is the reason for the above size
  * restriction. However, if the flag is not present, then you
  * are free to use as many characters as you like.
@@ -478,7 +478,8 @@ void usb_stor_adjust_quirks(struct usb_device *udev, unsigned long *fflags)
 			US_FL_CAPACITY_OK | US_FL_IGNORE_RESIDUE |
 			US_FL_SINGLE_LUN | US_FL_NO_WP_DETECT |
 			US_FL_NO_READ_DISC_INFO | US_FL_NO_READ_CAPACITY_16 |
-			US_FL_INITIAL_READ10 | US_FL_WRITE_CACHE);
+			US_FL_INITIAL_READ10 | US_FL_WRITE_CACHE |
+			US_FL_NO_ATA_1X | US_FL_NO_REPORT_OPCODES);
 
 	p = quirks;
 	while (*p) {
@@ -516,6 +517,9 @@ void usb_stor_adjust_quirks(struct usb_device *udev, unsigned long *fflags)
 		case 'e':
 			f |= US_FL_NO_READ_CAPACITY_16;
 			break;
+		case 'f':
+			f |= US_FL_NO_REPORT_OPCODES;
+			break;
 		case 'h':
 			f |= US_FL_CAPACITY_HEURISTICS;
 			break;
@@ -543,6 +547,9 @@ void usb_stor_adjust_quirks(struct usb_device *udev, unsigned long *fflags)
 		case 's':
 			f |= US_FL_SINGLE_LUN;
 			break;
+		case 't':
+			f |= US_FL_NO_ATA_1X;
+			break;
 		case 'u':
 			f |= US_FL_IGNORE_UAS;
 			break;
diff --git a/drivers/usb/wusbcore/Kconfig b/drivers/usb/wusbcore/Kconfig
index 0e17b966e1b4..348de1d6726e 100644
--- a/drivers/usb/wusbcore/Kconfig
+++ b/drivers/usb/wusbcore/Kconfig
@@ -3,7 +3,6 @@
 #
 config USB_WUSB
 	tristate "Enable Wireless USB extensions"
-	depends on PCI
 	depends on UWB
         select CRYPTO
         select CRYPTO_BLKCIPHER
@@ -18,6 +17,7 @@ config USB_WUSB
 
 config USB_WUSB_CBAF
 	tristate "Support WUSB Cable Based Association (CBA)"
+	depends on USB
 	help
 	  Some WUSB devices support Cable Based Association. It's used to
 	  enable the secure communication between the host and the
diff --git a/drivers/usb/wusbcore/crypto.c b/drivers/usb/wusbcore/crypto.c
index 9a95b2dc6d1b..50ce80d604f3 100644
--- a/drivers/usb/wusbcore/crypto.c
+++ b/drivers/usb/wusbcore/crypto.c
@@ -222,8 +222,6 @@ static int wusb_ccm_mac(struct crypto_blkcipher *tfm_cbc,
 	WARN_ON(sizeof(ax) != sizeof(struct aes_ccm_block));
 
 	result = -ENOMEM;
-	zero_padding = sizeof(struct aes_ccm_block)
-		- blen % sizeof(struct aes_ccm_block);
 	zero_padding = blen % sizeof(struct aes_ccm_block);
 	if (zero_padding)
 		zero_padding = sizeof(struct aes_ccm_block) - zero_padding;
diff --git a/drivers/usb/wusbcore/devconnect.c b/drivers/usb/wusbcore/devconnect.c
index 0677139c6065..3f4f5fbded55 100644
--- a/drivers/usb/wusbcore/devconnect.c
+++ b/drivers/usb/wusbcore/devconnect.c
@@ -329,7 +329,7 @@ void wusbhc_devconnect_ack(struct wusbhc *wusbhc, struct wusb_dn_connect *dnc,
 	port->wusb_dev = wusb_dev;
 	port->status |= USB_PORT_STAT_CONNECTION;
 	port->change |= USB_PORT_STAT_C_CONNECTION;
-	/* Now the port status changed to connected; khubd will
+	/* Now the port status changed to connected; hub_wq will
 	 * pick the change up and try to reset the port to bring it to
 	 * the enabled state--so this process returns up to the stack
 	 * and it calls back into wusbhc_rh_port_reset().
@@ -343,7 +343,7 @@ error_unlock:
 /*
  * Disconnect a Wireless USB device from its fake port
  *
- * Marks the port as disconnected so that khubd can pick up the change
+ * Marks the port as disconnected so that hub_wq can pick up the change
  * and drops our knowledge about the device.
  *
  * Assumes there is a device connected
@@ -379,7 +379,7 @@ static void __wusbhc_dev_disconnect(struct wusbhc *wusbhc,
 		wusbhc_gtk_rekey(wusbhc);
 
 	/* The Wireless USB part has forgotten about the device already; now
-	 * khubd's timer will pick up the disconnection and remove the USB
+	 * hub_wq's timer will pick up the disconnection and remove the USB
 	 * device from the system
 	 */
 }
diff --git a/drivers/usb/wusbcore/security.c b/drivers/usb/wusbcore/security.c
index 95be9953cd47..cc74d669c802 100644
--- a/drivers/usb/wusbcore/security.c
+++ b/drivers/usb/wusbcore/security.c
@@ -33,6 +33,20 @@ static void wusbhc_gtk_rekey_work(struct work_struct *work);
 
 int wusbhc_sec_create(struct wusbhc *wusbhc)
 {
+	/*
+	 * WQ is singlethread because we need to serialize rekey operations.
+	 * Use a separate workqueue for security operations instead of the
+	 * wusbd workqueue because security operations may need to communicate
+	 * directly with downstream wireless devices using synchronous URBs.
+	 * If a device is not responding, this could block other host
+	 * controller operations.
+	 */
+	wusbhc->wq_security = create_singlethread_workqueue("wusbd_security");
+	if (wusbhc->wq_security == NULL) {
+		pr_err("WUSB-core: Cannot create wusbd_security workqueue\n");
+		return -ENOMEM;
+	}
+
 	wusbhc->gtk.descr.bLength = sizeof(wusbhc->gtk.descr) +
 		sizeof(wusbhc->gtk.data);
 	wusbhc->gtk.descr.bDescriptorType = USB_DT_KEY;
@@ -48,6 +62,7 @@ int wusbhc_sec_create(struct wusbhc *wusbhc)
 /* Called when the HC is destroyed */
 void wusbhc_sec_destroy(struct wusbhc *wusbhc)
 {
+	destroy_workqueue(wusbhc->wq_security);
 }
 
 
@@ -596,5 +611,5 @@ void wusbhc_gtk_rekey(struct wusbhc *wusbhc)
 	 * and will cause a deadlock.  Instead, queue a work item to do
 	 * it when the lock is not held
 	 */
-	queue_work(wusbd, &wusbhc->gtk_rekey_work);
+	queue_work(wusbhc->wq_security, &wusbhc->gtk_rekey_work);
 }
diff --git a/drivers/usb/wusbcore/wa-hc.h b/drivers/usb/wusbcore/wa-hc.h
index f2a8d29e17b9..edc7267157f3 100644
--- a/drivers/usb/wusbcore/wa-hc.h
+++ b/drivers/usb/wusbcore/wa-hc.h
@@ -64,7 +64,7 @@
  *
  * Note much of the activity is difficult to follow. For example a
  * device connect goes to devconnect, which will cause the "fake" root
- * hub port to show a connect and stop there. Then khubd will notice
+ * hub port to show a connect and stop there. Then hub_wq will notice
  * and call into the rh.c:hwahc_rc_port_reset() code to authenticate
  * the device (and this might require user intervention) and enable
  * the port.
diff --git a/drivers/usb/wusbcore/wa-xfer.c b/drivers/usb/wusbcore/wa-xfer.c
index e279015be466..69af4fd9e072 100644
--- a/drivers/usb/wusbcore/wa-xfer.c
+++ b/drivers/usb/wusbcore/wa-xfer.c
@@ -459,14 +459,25 @@ static void __wa_xfer_abort_cb(struct urb *urb)
 			__func__, urb->status);
 		if (xfer) {
 			unsigned long flags;
-			int done;
+			int done, seg_index = 0;
 			struct wa_rpipe *rpipe = xfer->ep->hcpriv;
 
 			dev_err(dev, "%s: cleaning up xfer %p ID 0x%08X.\n",
 				__func__, xfer, wa_xfer_id(xfer));
 			spin_lock_irqsave(&xfer->lock, flags);
-			/* mark all segs as aborted. */
-			wa_complete_remaining_xfer_segs(xfer, 0,
+			/* skip done segs. */
+			while (seg_index < xfer->segs) {
+				struct wa_seg *seg = xfer->seg[seg_index];
+
+				if ((seg->status == WA_SEG_DONE) ||
+					(seg->status == WA_SEG_ERROR)) {
+					++seg_index;
+				} else {
+					break;
+				}
+			}
+			/* mark remaining segs as aborted. */
+			wa_complete_remaining_xfer_segs(xfer, seg_index,
 				WA_SEG_ABORTED);
 			done = __wa_xfer_is_done(xfer);
 			spin_unlock_irqrestore(&xfer->lock, flags);
diff --git a/drivers/usb/wusbcore/wusbhc.h b/drivers/usb/wusbcore/wusbhc.h
index 2384add45371..41838db7f85c 100644
--- a/drivers/usb/wusbcore/wusbhc.h
+++ b/drivers/usb/wusbcore/wusbhc.h
@@ -295,6 +295,9 @@ struct wusbhc {
 	} __attribute__((packed)) gtk;
 	u8 gtk_index;
 	u32 gtk_tkid;
+
+	/* workqueue for WUSB security related tasks. */
+	struct workqueue_struct *wq_security;
 	struct work_struct gtk_rekey_work;
 
 	struct usb_encryption_descriptor *ccm1_etd;
diff --git a/drivers/uwb/Kconfig b/drivers/uwb/Kconfig
index 2431eedbe6a5..c204094e1bb4 100644
--- a/drivers/uwb/Kconfig
+++ b/drivers/uwb/Kconfig
@@ -4,7 +4,6 @@
 
 menuconfig UWB
 	tristate "Ultra Wideband devices"
-	depends on PCI
 	default n
 	help
 	  UWB is a high-bandwidth, low-power, point-to-point radio
diff --git a/drivers/uwb/driver.c b/drivers/uwb/driver.c
index 3e5454aba5d4..776bcb3c2140 100644
--- a/drivers/uwb/driver.c
+++ b/drivers/uwb/driver.c
@@ -121,9 +121,19 @@ static int __init uwb_subsys_init(void)
 	result = class_register(&uwb_rc_class);
 	if (result < 0)
 		goto error_uwb_rc_class_register;
+
+	/* Register the UWB bus */
+	result = bus_register(&uwb_bus_type);
+	if (result) {
+		pr_err("%s - registering bus driver failed\n", __func__);
+		goto exit_bus;
+	}
+
 	uwb_dbg_init();
 	return 0;
 
+exit_bus:
+	class_unregister(&uwb_rc_class);
 error_uwb_rc_class_register:
 	uwb_est_destroy();
 error_est_init:
@@ -134,6 +144,7 @@ module_init(uwb_subsys_init);
 static void __exit uwb_subsys_exit(void)
 {
 	uwb_dbg_exit();
+	bus_unregister(&uwb_bus_type);
 	class_unregister(&uwb_rc_class);
 	uwb_est_destroy();
 	return;
diff --git a/drivers/uwb/lc-dev.c b/drivers/uwb/lc-dev.c
index d0303f0dbe15..8c7cfab5cee3 100644
--- a/drivers/uwb/lc-dev.c
+++ b/drivers/uwb/lc-dev.c
@@ -255,6 +255,12 @@ static struct attribute *uwb_dev_attrs[] = {
 };
 ATTRIBUTE_GROUPS(uwb_dev);
 
+/* UWB bus type. */
+struct bus_type uwb_bus_type = {
+	.name =		"uwb",
+	.dev_groups =	uwb_dev_groups,
+};
+
 /**
  * Device SYSFS registration
  */
@@ -263,10 +269,6 @@ static int __uwb_dev_sys_add(struct uwb_dev *uwb_dev, struct device *parent_dev)
 	struct device *dev;
 
 	dev = &uwb_dev->dev;
-	/* Device sysfs files are only useful for neighbor devices not
-	   local radio controllers. */
-	if (&uwb_dev->rc->uwb_dev != uwb_dev)
-		dev->groups = uwb_dev_groups;
 	dev->parent = parent_dev;
 	dev_set_drvdata(dev, uwb_dev);
 
@@ -365,8 +367,8 @@ int __uwb_dev_offair(struct uwb_dev *uwb_dev, struct uwb_rc *rc)
 	uwb_dev_addr_print(devbuf, sizeof(devbuf), &uwb_dev->dev_addr);
 	dev_info(dev, "uwb device (mac %s dev %s) disconnected from %s %s\n",
 		 macbuf, devbuf,
-		 rc ? rc->uwb_dev.dev.parent->bus->name : "n/a",
-		 rc ? dev_name(rc->uwb_dev.dev.parent) : "");
+		 uwb_dev->dev.bus->name,
+		 rc ? dev_name(&(rc->uwb_dev.dev)) : "");
 	uwb_dev_rm(uwb_dev);
 	list_del(&uwb_dev->bce->node);
 	uwb_bce_put(uwb_dev->bce);
@@ -428,6 +430,7 @@ void uwbd_dev_onair(struct uwb_rc *rc, struct uwb_beca_e *bce)
 		return;
 	}
 	uwb_dev_init(uwb_dev);		/* This sets refcnt to one, we own it */
+	uwb_dev->dev.bus = &uwb_bus_type;
 	uwb_dev->mac_addr = *bce->mac_addr;
 	uwb_dev->dev_addr = bce->dev_addr;
 	dev_set_name(&uwb_dev->dev, "%s", macbuf);
@@ -445,8 +448,8 @@ void uwbd_dev_onair(struct uwb_rc *rc, struct uwb_beca_e *bce)
 	}
 
 	dev_info(dev, "uwb device (mac %s dev %s) connected to %s %s\n",
-		 macbuf, devbuf, rc->uwb_dev.dev.parent->bus->name,
-		 dev_name(rc->uwb_dev.dev.parent));
+		 macbuf, devbuf, uwb_dev->dev.bus->name,
+		 dev_name(&(rc->uwb_dev.dev)));
 	uwb_notify(rc, uwb_dev, UWB_NOTIF_ONAIR);
 	return;
 
diff --git a/drivers/uwb/lc-rc.c b/drivers/uwb/lc-rc.c
index 3eca6ceb9844..d059ad4d0dbd 100644
--- a/drivers/uwb/lc-rc.c
+++ b/drivers/uwb/lc-rc.c
@@ -119,10 +119,109 @@ struct uwb_rc *uwb_rc_alloc(void)
 }
 EXPORT_SYMBOL_GPL(uwb_rc_alloc);
 
+/*
+ * Show the ASIE that is broadcast in the UWB beacon by this uwb_rc device.
+ */
+static ssize_t ASIE_show(struct device *dev,
+				struct device_attribute *attr, char *buf)
+{
+	struct uwb_dev *uwb_dev = to_uwb_dev(dev);
+	struct uwb_rc *rc = uwb_dev->rc;
+	struct uwb_ie_hdr *ie;
+	void *ptr;
+	size_t len;
+	int result = 0;
+
+	/* init empty buffer. */
+	result = scnprintf(buf, PAGE_SIZE, "\n");
+	mutex_lock(&rc->ies_mutex);
+	/* walk IEData looking for an ASIE. */
+	ptr = rc->ies->IEData;
+	len = le16_to_cpu(rc->ies->wIELength);
+	for (;;) {
+		ie = uwb_ie_next(&ptr, &len);
+		if (!ie)
+			break;
+		if (ie->element_id == UWB_APP_SPEC_IE) {
+			result = uwb_ie_dump_hex(ie,
+					ie->length + sizeof(struct uwb_ie_hdr),
+					buf, PAGE_SIZE);
+			break;
+		}
+	}
+	mutex_unlock(&rc->ies_mutex);
+
+	return result;
+}
+
+/*
+ * Update the ASIE that is broadcast in the UWB beacon by this uwb_rc device.
+ */
+static ssize_t ASIE_store(struct device *dev,
+				 struct device_attribute *attr,
+				 const char *buf, size_t size)
+{
+	struct uwb_dev *uwb_dev = to_uwb_dev(dev);
+	struct uwb_rc *rc = uwb_dev->rc;
+	char ie_buf[255];
+	int result, ie_len = 0;
+	const char *cur_ptr = buf;
+	struct uwb_ie_hdr *ie;
+
+	/* empty string means clear the ASIE. */
+	if (strlen(buf) <= 1) {
+		uwb_rc_ie_rm(rc, UWB_APP_SPEC_IE);
+		return size;
+	}
+
+	/* if non-empty string, convert string of hex chars to binary. */
+	while (ie_len < sizeof(ie_buf)) {
+		int char_count;
+
+		if (sscanf(cur_ptr, " %02hhX %n",
+				&(ie_buf[ie_len]), &char_count) > 0) {
+			++ie_len;
+			/* skip chars read from cur_ptr. */
+			cur_ptr += char_count;
+		} else {
+			break;
+		}
+	}
+
+	/* validate IE length and type. */
+	if (ie_len < sizeof(struct uwb_ie_hdr)) {
+		dev_err(dev, "%s: Invalid ASIE size %d.\n", __func__, ie_len);
+		return -EINVAL;
+	}
+
+	ie = (struct uwb_ie_hdr *)ie_buf;
+	if (ie->element_id != UWB_APP_SPEC_IE) {
+		dev_err(dev, "%s: Invalid IE element type size = 0x%02X.\n",
+				__func__, ie->element_id);
+		return -EINVAL;
+	}
+
+	/* bounds check length field from user. */
+	if (ie->length > (ie_len - sizeof(struct uwb_ie_hdr)))
+		ie->length = ie_len - sizeof(struct uwb_ie_hdr);
+
+	/*
+	 * Valid ASIE received. Remove current ASIE then add the new one using
+	 * uwb_rc_ie_add.
+	 */
+	uwb_rc_ie_rm(rc, UWB_APP_SPEC_IE);
+
+	result = uwb_rc_ie_add(rc, ie, ie->length + sizeof(struct uwb_ie_hdr));
+
+	return result >= 0 ? size : result;
+}
+static DEVICE_ATTR_RW(ASIE);
+
 static struct attribute *rc_attrs[] = {
 		&dev_attr_mac_address.attr,
 		&dev_attr_scan.attr,
 		&dev_attr_beacon.attr,
+		&dev_attr_ASIE.attr,
 		NULL,
 };
 
diff --git a/drivers/uwb/uwb-internal.h b/drivers/uwb/uwb-internal.h
index 9a103b100f1e..353c0555a1f5 100644
--- a/drivers/uwb/uwb-internal.h
+++ b/drivers/uwb/uwb-internal.h
@@ -172,7 +172,8 @@ struct uwb_rsv_alloc_info {
 	int interval;
 };
 
-int uwb_rsv_find_best_allocation(struct uwb_rsv *rsv, struct uwb_mas_bm *available, 
+int uwb_rsv_find_best_allocation(struct uwb_rsv *rsv,
+				 struct uwb_mas_bm *available,
 				 struct uwb_mas_bm *result);
 void uwb_rsv_handle_drp_avail_change(struct uwb_rc *rc);
 /*
@@ -313,6 +314,7 @@ int uwb_radio_force_channel(struct uwb_rc *rc, int channel);
 
 /* -- UWB Sysfs representation */
 extern struct class uwb_rc_class;
+extern struct bus_type uwb_bus_type;
 extern struct device_attribute dev_attr_mac_address;
 extern struct device_attribute dev_attr_beacon;
 extern struct device_attribute dev_attr_scan;