Merge branch 'thermal' into release

6 files changed, 486 insertions, 500 deletions

diff --git a/drivers/acpi/fan.c b/drivers/acpi/fan.c
index eaaee1660bdf..ae41cf3cf4e5 100644
--- a/drivers/acpi/fan.c
+++ b/drivers/acpi/fan.c
@@ -68,31 +68,35 @@ static struct acpi_driver acpi_fan_driver = {
 };
 
 /* thermal cooling device callbacks */
-static int fan_get_max_state(struct thermal_cooling_device *cdev, char *buf)
+static int fan_get_max_state(struct thermal_cooling_device *cdev, unsigned long
+			     *state)
 {
 	/* ACPI fan device only support two states: ON/OFF */
-	return sprintf(buf, "1\n");
+	*state = 1;
+	return 0;
 }
 
-static int fan_get_cur_state(struct thermal_cooling_device *cdev, char *buf)
+static int fan_get_cur_state(struct thermal_cooling_device *cdev, unsigned long
+			     *state)
 {
 	struct acpi_device *device = cdev->devdata;
-	int state;
 	int result;
+	int acpi_state;
 
 	if (!device)
 		return -EINVAL;
 
-	result = acpi_bus_get_power(device->handle, &state);
+	result = acpi_bus_get_power(device->handle, &acpi_state);
 	if (result)
 		return result;
 
-	return sprintf(buf, "%s\n", state == ACPI_STATE_D3 ? "0" :
-			 (state == ACPI_STATE_D0 ? "1" : "unknown"));
+	*state = (acpi_state == ACPI_STATE_D3 ? 0 :
+		 (acpi_state == ACPI_STATE_D0 ? 1 : -1));
+	return 0;
 }
 
 static int
-fan_set_cur_state(struct thermal_cooling_device *cdev, unsigned int state)
+fan_set_cur_state(struct thermal_cooling_device *cdev, unsigned long state)
 {
 	struct acpi_device *device = cdev->devdata;
 	int result;
diff --git a/drivers/acpi/processor_thermal.c b/drivers/acpi/processor_thermal.c
index b1eb376fae45..0e47e299a9ac 100644
--- a/drivers/acpi/processor_thermal.c
+++ b/drivers/acpi/processor_thermal.c
@@ -373,7 +373,8 @@ static int acpi_processor_max_state(struct acpi_processor *pr)
 	return max_state;
 }
 static int
-processor_get_max_state(struct thermal_cooling_device *cdev, char *buf)
+processor_get_max_state(struct thermal_cooling_device *cdev,
+			unsigned long *state)
 {
 	struct acpi_device *device = cdev->devdata;
 	struct acpi_processor *pr = acpi_driver_data(device);
@@ -381,28 +382,29 @@ processor_get_max_state(struct thermal_cooling_device *cdev, char *buf)
 	if (!device || !pr)
 		return -EINVAL;
 
-	return sprintf(buf, "%d\n", acpi_processor_max_state(pr));
+	*state = acpi_processor_max_state(pr);
+	return 0;
 }
 
 static int
-processor_get_cur_state(struct thermal_cooling_device *cdev, char *buf)
+processor_get_cur_state(struct thermal_cooling_device *cdev,
+			unsigned long *cur_state)
 {
 	struct acpi_device *device = cdev->devdata;
 	struct acpi_processor *pr = acpi_driver_data(device);
-	int cur_state;
 
 	if (!device || !pr)
 		return -EINVAL;
 
-	cur_state = cpufreq_get_cur_state(pr->id);
+	*cur_state = cpufreq_get_cur_state(pr->id);
 	if (pr->flags.throttling)
-		cur_state += pr->throttling.state;
-
-	return sprintf(buf, "%d\n", cur_state);
+		*cur_state += pr->throttling.state;
+	return 0;
 }
 
 static int
-processor_set_cur_state(struct thermal_cooling_device *cdev, unsigned int state)
+processor_set_cur_state(struct thermal_cooling_device *cdev,
+			unsigned long state)
 {
 	struct acpi_device *device = cdev->devdata;
 	struct acpi_processor *pr = acpi_driver_data(device);
diff --git a/drivers/acpi/thermal.c b/drivers/acpi/thermal.c
index 99e6f1f8ea45..6b959976b7a4 100644
--- a/drivers/acpi/thermal.c
+++ b/drivers/acpi/thermal.c
@@ -37,11 +37,11 @@
 #include <linux/init.h>
 #include <linux/types.h>
 #include <linux/proc_fs.h>
-#include <linux/timer.h>
 #include <linux/jiffies.h>
 #include <linux/kmod.h>
 #include <linux/seq_file.h>
 #include <linux/reboot.h>
+#include <linux/device.h>
 #include <asm/uaccess.h>
 #include <linux/thermal.h>
 #include <acpi/acpi_bus.h>
@@ -190,7 +190,6 @@ struct acpi_thermal {
 	struct acpi_thermal_state state;
 	struct acpi_thermal_trips trips;
 	struct acpi_handle_list devices;
-	struct timer_list timer;
 	struct thermal_zone_device *thermal_zone;
 	int tz_enabled;
 	struct mutex lock;
@@ -290,6 +289,11 @@ static int acpi_thermal_set_polling(struct acpi_thermal *tz, int seconds)
 
 	tz->polling_frequency = seconds * 10;	/* Convert value to deci-seconds */
 
+	tz->thermal_zone->polling_delay = seconds * 1000;
+
+	if (tz->tz_enabled)
+		thermal_zone_device_update(tz->thermal_zone);
+
 	ACPI_DEBUG_PRINT((ACPI_DB_INFO,
 			  "Polling frequency set to %lu seconds\n",
 			  tz->polling_frequency/10));
@@ -569,392 +573,18 @@ static int acpi_thermal_get_trip_points(struct acpi_thermal *tz)
 	return acpi_thermal_trips_update(tz, ACPI_TRIPS_INIT);
 }
 
-static int acpi_thermal_critical(struct acpi_thermal *tz)
-{
-	if (!tz || !tz->trips.critical.flags.valid)
-		return -EINVAL;
-
-	if (tz->temperature >= tz->trips.critical.temperature) {
-		printk(KERN_WARNING PREFIX "Critical trip point\n");
-		tz->trips.critical.flags.enabled = 1;
-	} else if (tz->trips.critical.flags.enabled)
-		tz->trips.critical.flags.enabled = 0;
-
-	acpi_bus_generate_proc_event(tz->device, ACPI_THERMAL_NOTIFY_CRITICAL,
-				tz->trips.critical.flags.enabled);
-	acpi_bus_generate_netlink_event(tz->device->pnp.device_class,
-					  dev_name(&tz->device->dev),
-					  ACPI_THERMAL_NOTIFY_CRITICAL,
-					  tz->trips.critical.flags.enabled);
-
-	/* take no action if nocrt is set */
-	if(!nocrt) {
-		printk(KERN_EMERG
-			"Critical temperature reached (%ld C), shutting down.\n",
-			KELVIN_TO_CELSIUS(tz->temperature));
-		orderly_poweroff(true);
-	}
-
-	return 0;
-}
-
-static int acpi_thermal_hot(struct acpi_thermal *tz)
-{
-	if (!tz || !tz->trips.hot.flags.valid)
-		return -EINVAL;
-
-	if (tz->temperature >= tz->trips.hot.temperature) {
-		printk(KERN_WARNING PREFIX "Hot trip point\n");
-		tz->trips.hot.flags.enabled = 1;
-	} else if (tz->trips.hot.flags.enabled)
-		tz->trips.hot.flags.enabled = 0;
-
-	acpi_bus_generate_proc_event(tz->device, ACPI_THERMAL_NOTIFY_HOT,
-				tz->trips.hot.flags.enabled);
-	acpi_bus_generate_netlink_event(tz->device->pnp.device_class,
-					  dev_name(&tz->device->dev),
-					  ACPI_THERMAL_NOTIFY_HOT,
-					  tz->trips.hot.flags.enabled);
-
-	/* TBD: Call user-mode "sleep(S4)" function if nocrt is cleared */
-
-	return 0;
-}
-
-static void acpi_thermal_passive(struct acpi_thermal *tz)
-{
-	int result = 1;
-	struct acpi_thermal_passive *passive = NULL;
-	int trend = 0;
-	int i = 0;
-
-
-	if (!tz || !tz->trips.passive.flags.valid)
-		return;
-
-	passive = &(tz->trips.passive);
-
-	/*
-	 * Above Trip?
-	 * -----------
-	 * Calculate the thermal trend (using the passive cooling equation)
-	 * and modify the performance limit for all passive cooling devices
-	 * accordingly.  Note that we assume symmetry.
-	 */
-	if (tz->temperature >= passive->temperature) {
-		trend =
-		    (passive->tc1 * (tz->temperature - tz->last_temperature)) +
-		    (passive->tc2 * (tz->temperature - passive->temperature));
-		ACPI_DEBUG_PRINT((ACPI_DB_INFO,
-				  "trend[%d]=(tc1[%lu]*(tmp[%lu]-last[%lu]))+(tc2[%lu]*(tmp[%lu]-psv[%lu]))\n",
-				  trend, passive->tc1, tz->temperature,
-				  tz->last_temperature, passive->tc2,
-				  tz->temperature, passive->temperature));
-		passive->flags.enabled = 1;
-		/* Heating up? */
-		if (trend > 0)
-			for (i = 0; i < passive->devices.count; i++)
-				acpi_processor_set_thermal_limit(passive->
-								 devices.
-								 handles[i],
-								 ACPI_PROCESSOR_LIMIT_INCREMENT);
-		/* Cooling off? */
-		else if (trend < 0) {
-			for (i = 0; i < passive->devices.count; i++)
-				/*
-				 * assume that we are on highest
-				 * freq/lowest thrott and can leave
-				 * passive mode, even in error case
-				 */
-				if (!acpi_processor_set_thermal_limit
-				    (passive->devices.handles[i],
-				     ACPI_PROCESSOR_LIMIT_DECREMENT))
-					result = 0;
-			/*
-			 * Leave cooling mode, even if the temp might
-			 * higher than trip point This is because some
-			 * machines might have long thermal polling
-			 * frequencies (tsp) defined. We will fall back
-			 * into passive mode in next cycle (probably quicker)
-			 */
-			if (result) {
-				passive->flags.enabled = 0;
-				ACPI_DEBUG_PRINT((ACPI_DB_INFO,
-						  "Disabling passive cooling, still above threshold,"
-						  " but we are cooling down\n"));
-			}
-		}
-		return;
-	}
-
-	/*
-	 * Below Trip?
-	 * -----------
-	 * Implement passive cooling hysteresis to slowly increase performance
-	 * and avoid thrashing around the passive trip point.  Note that we
-	 * assume symmetry.
-	 */
-	if (!passive->flags.enabled)
-		return;
-	for (i = 0; i < passive->devices.count; i++)
-		if (!acpi_processor_set_thermal_limit
-		    (passive->devices.handles[i],
-		     ACPI_PROCESSOR_LIMIT_DECREMENT))
-			result = 0;
-	if (result) {
-		passive->flags.enabled = 0;
-		ACPI_DEBUG_PRINT((ACPI_DB_INFO,
-				  "Disabling passive cooling (zone is cool)\n"));
-	}
-}
-
-static void acpi_thermal_active(struct acpi_thermal *tz)
-{
-	int result = 0;
-	struct acpi_thermal_active *active = NULL;
-	int i = 0;
-	int j = 0;
-	unsigned long maxtemp = 0;
-
-
-	if (!tz)
-		return;
-
-	for (i = 0; i < ACPI_THERMAL_MAX_ACTIVE; i++) {
-		active = &(tz->trips.active[i]);
-		if (!active || !active->flags.valid)
-			break;
-		if (tz->temperature >= active->temperature) {
-			/*
-			 * Above Threshold?
-			 * ----------------
-			 * If not already enabled, turn ON all cooling devices
-			 * associated with this active threshold.
-			 */
-			if (active->temperature > maxtemp)
-				tz->state.active_index = i;
-			maxtemp = active->temperature;
-			if (active->flags.enabled)
-				continue;
-			for (j = 0; j < active->devices.count; j++) {
-				result =
-				    acpi_bus_set_power(active->devices.
-						       handles[j],
-						       ACPI_STATE_D0);
-				if (result) {
-					printk(KERN_WARNING PREFIX
-						      "Unable to turn cooling device [%p] 'on'\n",
-						      active->devices.
-						      handles[j]);
-					continue;
-				}
-				active->flags.enabled = 1;
-				ACPI_DEBUG_PRINT((ACPI_DB_INFO,
-						  "Cooling device [%p] now 'on'\n",
-						  active->devices.handles[j]));
-			}
-			continue;
-		}
-		if (!active->flags.enabled)
-			continue;
-		/*
-		 * Below Threshold?
-		 * ----------------
-		 * Turn OFF all cooling devices associated with this
-		 * threshold.
-		 */
-		for (j = 0; j < active->devices.count; j++) {
-			result = acpi_bus_set_power(active->devices.handles[j],
-						    ACPI_STATE_D3);
-			if (result) {
-				printk(KERN_WARNING PREFIX
-					      "Unable to turn cooling device [%p] 'off'\n",
-					      active->devices.handles[j]);
-				continue;
-			}
-			active->flags.enabled = 0;
-			ACPI_DEBUG_PRINT((ACPI_DB_INFO,
-					  "Cooling device [%p] now 'off'\n",
-					  active->devices.handles[j]));
-		}
-	}
-}
-
-static void acpi_thermal_check(void *context);
-
-static void acpi_thermal_run(unsigned long data)
-{
-	struct acpi_thermal *tz = (struct acpi_thermal *)data;
-	if (!tz->zombie)
-		acpi_os_execute(OSL_GPE_HANDLER, acpi_thermal_check, (void *)data);
-}
-
-static void acpi_thermal_active_off(void *data)
-{
-	int result = 0;
-	struct acpi_thermal *tz = data;
-	int i = 0;
-	int j = 0;
-	struct acpi_thermal_active *active = NULL;
-
-	if (!tz) {
-		printk(KERN_ERR PREFIX "Invalid (NULL) context\n");
-		return;
-	}
-
-	result = acpi_thermal_get_temperature(tz);
-	if (result)
-		return;
-
-	for (i = 0; i < ACPI_THERMAL_MAX_ACTIVE; i++) {
-		active = &(tz->trips.active[i]);
-		if (!active || !active->flags.valid)
-			break;
-		if (tz->temperature >= active->temperature) {
-			/*
-			 * If the thermal temperature is greater than the
-			 * active threshod, unnecessary to turn off the
-			 * the active cooling device.
-			 */
-			continue;
-		}
-		/*
-		 * Below Threshold?
-		 * ----------------
-		 * Turn OFF all cooling devices associated with this
-		 * threshold.
-		 */
-		for (j = 0; j < active->devices.count; j++)
-			result = acpi_bus_set_power(active->devices.handles[j],
-						    ACPI_STATE_D3);
-	}
-}
-
 static void acpi_thermal_check(void *data)
 {
-	int result = 0;
 	struct acpi_thermal *tz = data;
-	unsigned long sleep_time = 0;
-	unsigned long timeout_jiffies = 0;
-	int i = 0;
-	struct acpi_thermal_state state;
-
-
-	if (!tz) {
-		printk(KERN_ERR PREFIX "Invalid (NULL) context\n");
-		return;
-	}
-
-	/* Check if someone else is already running */
-	if (!mutex_trylock(&tz->lock))
-		return;
-
-	state = tz->state;
-
-	result = acpi_thermal_get_temperature(tz);
-	if (result)
-		goto unlock;
-
-	if (!tz->tz_enabled)
-		goto unlock;
-
-	memset(&tz->state, 0, sizeof(tz->state));
-
-	/*
-	 * Check Trip Points
-	 * -----------------
-	 * Compare the current temperature to the trip point values to see
-	 * if we've entered one of the thermal policy states.  Note that
-	 * this function determines when a state is entered, but the 
-	 * individual policy decides when it is exited (e.g. hysteresis).
-	 */
-	if (tz->trips.critical.flags.valid)
-		state.critical |=
-		    (tz->temperature >= tz->trips.critical.temperature);
-	if (tz->trips.hot.flags.valid)
-		state.hot |= (tz->temperature >= tz->trips.hot.temperature);
-	if (tz->trips.passive.flags.valid)
-		state.passive |=
-		    (tz->temperature >= tz->trips.passive.temperature);
-	for (i = 0; i < ACPI_THERMAL_MAX_ACTIVE; i++)
-		if (tz->trips.active[i].flags.valid)
-			state.active |=
-			    (tz->temperature >=
-			     tz->trips.active[i].temperature);
-
-	/*
-	 * Invoke Policy
-	 * -------------
-	 * Separated from the above check to allow individual policy to 
-	 * determine when to exit a given state.
-	 */
-	if (state.critical)
-		acpi_thermal_critical(tz);
-	if (state.hot)
-		acpi_thermal_hot(tz);
-	if (state.passive)
-		acpi_thermal_passive(tz);
-	if (state.active)
-		acpi_thermal_active(tz);
-
-	/*
-	 * Calculate State
-	 * ---------------
-	 * Again, separated from the above two to allow independent policy
-	 * decisions.
-	 */
-	tz->state.critical = tz->trips.critical.flags.enabled;
-	tz->state.hot = tz->trips.hot.flags.enabled;
-	tz->state.passive = tz->trips.passive.flags.enabled;
-	tz->state.active = 0;
-	for (i = 0; i < ACPI_THERMAL_MAX_ACTIVE; i++)
-		tz->state.active |= tz->trips.active[i].flags.enabled;
-
-	/*
-	 * Calculate Sleep Time
-	 * --------------------
-	 * If we're in the passive state, use _TSP's value.  Otherwise
-	 * use the default polling frequency (e.g. _TZP).  If no polling
-	 * frequency is specified then we'll wait forever (at least until
-	 * a thermal event occurs).  Note that _TSP and _TZD values are
-	 * given in 1/10th seconds (we must covert to milliseconds).
-	 */
-	if (tz->state.passive) {
-		sleep_time = tz->trips.passive.tsp * 100;
-		timeout_jiffies =  jiffies + (HZ * sleep_time) / 1000;
-	} else if (tz->polling_frequency > 0) {
-		sleep_time = tz->polling_frequency * 100;
-		timeout_jiffies =  round_jiffies(jiffies + (HZ * sleep_time) / 1000);
-	}
 
-	ACPI_DEBUG_PRINT((ACPI_DB_INFO, "%s: temperature[%lu] sleep[%lu]\n",
-			  tz->name, tz->temperature, sleep_time));
-
-	/*
-	 * Schedule Next Poll
-	 * ------------------
-	 */
-	if (!sleep_time) {
-		if (timer_pending(&(tz->timer)))
-			del_timer(&(tz->timer));
-	} else {
-		if (timer_pending(&(tz->timer)))
-			mod_timer(&(tz->timer), timeout_jiffies);
-		else {
-			tz->timer.data = (unsigned long)tz;
-			tz->timer.function = acpi_thermal_run;
-			tz->timer.expires = timeout_jiffies;
-			add_timer(&(tz->timer));
-		}
-	}
-      unlock:
-	mutex_unlock(&tz->lock);
+	thermal_zone_device_update(tz->thermal_zone);
 }
 
 /* sys I/F for generic thermal sysfs support */
 #define KELVIN_TO_MILLICELSIUS(t) (t * 100 - 273200)
 
-static int thermal_get_temp(struct thermal_zone_device *thermal, char *buf)
+static int thermal_get_temp(struct thermal_zone_device *thermal,
+			    unsigned long *temp)
 {
 	struct acpi_thermal *tz = thermal->devdata;
 	int result;
@@ -966,25 +596,28 @@ static int thermal_get_temp(struct thermal_zone_device *thermal, char *buf)
 	if (result)
 		return result;
 
-	return sprintf(buf, "%ld\n", KELVIN_TO_MILLICELSIUS(tz->temperature));
+	*temp = KELVIN_TO_MILLICELSIUS(tz->temperature);
+	return 0;
 }
 
 static const char enabled[] = "kernel";
 static const char disabled[] = "user";
 static int thermal_get_mode(struct thermal_zone_device *thermal,
-				char *buf)
+				enum thermal_device_mode *mode)
 {
 	struct acpi_thermal *tz = thermal->devdata;
 
 	if (!tz)
 		return -EINVAL;
 
-	return sprintf(buf, "%s\n", tz->tz_enabled ?
-			enabled : disabled);
+	*mode = tz->tz_enabled ? THERMAL_DEVICE_ENABLED :
+		THERMAL_DEVICE_DISABLED;
+
+	return 0;
 }
 
 static int thermal_set_mode(struct thermal_zone_device *thermal,
-				const char *buf)
+				enum thermal_device_mode mode)
 {
 	struct acpi_thermal *tz = thermal->devdata;
 	int enable;
@@ -995,9 +628,9 @@ static int thermal_set_mode(struct thermal_zone_device *thermal,
 	/*
 	 * enable/disable thermal management from ACPI thermal driver
 	 */
-	if (!strncmp(buf, enabled, sizeof enabled - 1))
+	if (mode == THERMAL_DEVICE_ENABLED)
 		enable = 1;
-	else if (!strncmp(buf, disabled, sizeof disabled - 1))
+	else if (mode == THERMAL_DEVICE_DISABLED)
 		enable = 0;
 	else
 		return -EINVAL;
@@ -1013,7 +646,7 @@ static int thermal_set_mode(struct thermal_zone_device *thermal,
 }
 
 static int thermal_get_trip_type(struct thermal_zone_device *thermal,
-				 int trip, char *buf)
+				 int trip, enum thermal_trip_type *type)
 {
 	struct acpi_thermal *tz = thermal->devdata;
 	int i;
@@ -1022,27 +655,35 @@ static int thermal_get_trip_type(struct thermal_zone_device *thermal,
 		return -EINVAL;
 
 	if (tz->trips.critical.flags.valid) {
-		if (!trip)
-			return sprintf(buf, "critical\n");
+		if (!trip) {
+			*type = THERMAL_TRIP_CRITICAL;
+			return 0;
+		}
 		trip--;
 	}
 
 	if (tz->trips.hot.flags.valid) {
-		if (!trip)
-			return sprintf(buf, "hot\n");
+		if (!trip) {
+			*type = THERMAL_TRIP_HOT;
+			return 0;
+		}
 		trip--;
 	}
 
 	if (tz->trips.passive.flags.valid) {
-		if (!trip)
-			return sprintf(buf, "passive\n");
+		if (!trip) {
+			*type = THERMAL_TRIP_PASSIVE;
+			return 0;
+		}
 		trip--;
 	}
 
 	for (i = 0; i < ACPI_THERMAL_MAX_ACTIVE &&
 		tz->trips.active[i].flags.valid; i++) {
-		if (!trip)
-			return sprintf(buf, "active%d\n", i);
+		if (!trip) {
+			*type = THERMAL_TRIP_ACTIVE;
+			return 0;
+		}
 		trip--;
 	}
 
@@ -1050,7 +691,7 @@ static int thermal_get_trip_type(struct thermal_zone_device *thermal,
 }
 
 static int thermal_get_trip_temp(struct thermal_zone_device *thermal,
-				 int trip, char *buf)
+				 int trip, unsigned long *temp)
 {
 	struct acpi_thermal *tz = thermal->devdata;
 	int i;
@@ -1059,31 +700,39 @@ static int thermal_get_trip_temp(struct thermal_zone_device *thermal,
 		return -EINVAL;
 
 	if (tz->trips.critical.flags.valid) {
-		if (!trip)
-			return sprintf(buf, "%ld\n", KELVIN_TO_MILLICELSIUS(
-				tz->trips.critical.temperature));
+		if (!trip) {
+			*temp = KELVIN_TO_MILLICELSIUS(
+				tz->trips.critical.temperature);
+			return 0;
+		}
 		trip--;
 	}
 
 	if (tz->trips.hot.flags.valid) {
-		if (!trip)
-			return sprintf(buf, "%ld\n", KELVIN_TO_MILLICELSIUS(
-					tz->trips.hot.temperature));
+		if (!trip) {
+			*temp = KELVIN_TO_MILLICELSIUS(
+				tz->trips.hot.temperature);
+			return 0;
+		}
 		trip--;
 	}
 
 	if (tz->trips.passive.flags.valid) {
-		if (!trip)
-			return sprintf(buf, "%ld\n", KELVIN_TO_MILLICELSIUS(
-					tz->trips.passive.temperature));
+		if (!trip) {
+			*temp = KELVIN_TO_MILLICELSIUS(
+				tz->trips.passive.temperature);
+			return 0;
+		}
 		trip--;
 	}
 
 	for (i = 0; i < ACPI_THERMAL_MAX_ACTIVE &&
 		tz->trips.active[i].flags.valid; i++) {
-		if (!trip)
-			return sprintf(buf, "%ld\n", KELVIN_TO_MILLICELSIUS(
-					tz->trips.active[i].temperature));
+		if (!trip) {
+			*temp = KELVIN_TO_MILLICELSIUS(
+				tz->trips.active[i].temperature);
+			return 0;
+		}
 		trip--;
 	}
 
@@ -1102,6 +751,29 @@ static int thermal_get_crit_temp(struct thermal_zone_device *thermal,
 		return -EINVAL;
 }
 
+static int thermal_notify(struct thermal_zone_device *thermal, int trip,
+			   enum thermal_trip_type trip_type)
+{
+	u8 type = 0;
+	struct acpi_thermal *tz = thermal->devdata;
+
+	if (trip_type == THERMAL_TRIP_CRITICAL)
+		type = ACPI_THERMAL_NOTIFY_CRITICAL;
+	else if (trip_type == THERMAL_TRIP_HOT)
+		type = ACPI_THERMAL_NOTIFY_HOT;
+	else
+		return 0;
+
+	acpi_bus_generate_proc_event(tz->device, type, 1);
+	acpi_bus_generate_netlink_event(tz->device->pnp.device_class,
+					dev_name(&tz->device->dev), type, 1);
+
+	if (trip_type == THERMAL_TRIP_CRITICAL && nocrt)
+		return 1;
+
+	return 0;
+}
+
 typedef int (*cb)(struct thermal_zone_device *, int,
 		  struct thermal_cooling_device *);
 static int acpi_thermal_cooling_device_cb(struct thermal_zone_device *thermal,
@@ -1194,6 +866,7 @@ static struct thermal_zone_device_ops acpi_thermal_zone_ops = {
 	.get_trip_type = thermal_get_trip_type,
 	.get_trip_temp = thermal_get_trip_temp,
 	.get_crit_temp = thermal_get_crit_temp,
+	.notify = thermal_notify,
 };
 
 static int acpi_thermal_register_thermal_zone(struct acpi_thermal *tz)
@@ -1214,8 +887,21 @@ static int acpi_thermal_register_thermal_zone(struct acpi_thermal *tz)
 
 	for (i = 0; i < ACPI_THERMAL_MAX_ACTIVE &&
 			tz->trips.active[i].flags.valid; i++, trips++);
-	tz->thermal_zone = thermal_zone_device_register("acpitz",
-					trips, tz, &acpi_thermal_zone_ops);
+
+	if (tz->trips.passive.flags.valid)
+		tz->thermal_zone =
+			thermal_zone_device_register("acpitz", trips, tz,
+						     &acpi_thermal_zone_ops,
+						     tz->trips.passive.tc1,
+						     tz->trips.passive.tc2,
+						     tz->trips.passive.tsp*100,
+						     tz->polling_frequency*100);
+	else
+		tz->thermal_zone =
+			thermal_zone_device_register("acpitz", trips, tz,
+						     &acpi_thermal_zone_ops,
+						     0, 0, 0,
+						     tz->polling_frequency);
 	if (IS_ERR(tz->thermal_zone))
 		return -ENODEV;
 
@@ -1447,13 +1133,13 @@ static int acpi_thermal_polling_seq_show(struct seq_file *seq, void *offset)
 	if (!tz)
 		goto end;
 
-	if (!tz->polling_frequency) {
+	if (!tz->thermal_zone->polling_delay) {
 		seq_puts(seq, "<polling disabled>\n");
 		goto end;
 	}
 
-	seq_printf(seq, "polling frequency:       %lu seconds\n",
-		   (tz->polling_frequency / 10));
+	seq_printf(seq, "polling frequency:       %d seconds\n",
+		   (tz->thermal_zone->polling_delay / 1000));
 
       end:
 	return 0;
@@ -1683,12 +1369,6 @@ static int acpi_thermal_add(struct acpi_device *device)
 	if (result)
 		goto unregister_thermal_zone;
 
-	init_timer(&tz->timer);
-
-	acpi_thermal_active_off(tz);
-
-	acpi_thermal_check(tz);
-
 	status = acpi_install_notify_handler(device->handle,
 					     ACPI_DEVICE_NOTIFY,
 					     acpi_thermal_notify, tz);
@@ -1717,36 +1397,15 @@ static int acpi_thermal_remove(struct acpi_device *device, int type)
 	acpi_status status = AE_OK;
 	struct acpi_thermal *tz = NULL;
 
-
 	if (!device || !acpi_driver_data(device))
 		return -EINVAL;
 
 	tz = acpi_driver_data(device);
 
-	/* avoid timer adding new defer task */
-	tz->zombie = 1;
-	/* wait for running timer (on other CPUs) finish */
-	del_timer_sync(&(tz->timer));
-	/* synchronize deferred task */
-	acpi_os_wait_events_complete(NULL);
-	/* deferred task may reinsert timer */
-	del_timer_sync(&(tz->timer));
-
 	status = acpi_remove_notify_handler(device->handle,
 					    ACPI_DEVICE_NOTIFY,
 					    acpi_thermal_notify);
 
-	/* Terminate policy */
-	if (tz->trips.passive.flags.valid && tz->trips.passive.flags.enabled) {
-		tz->trips.passive.flags.enabled = 0;
-		acpi_thermal_passive(tz);
-	}
-	if (tz->trips.active[0].flags.valid
-	    && tz->trips.active[0].flags.enabled) {
-		tz->trips.active[0].flags.enabled = 0;
-		acpi_thermal_active(tz);
-	}
-
 	acpi_thermal_remove_fs(device);
 	acpi_thermal_unregister_thermal_zone(tz);
 	mutex_destroy(&tz->lock);
diff --git a/drivers/acpi/video.c b/drivers/acpi/video.c
index bb5ed059114a..5259d502add6 100644
--- a/drivers/acpi/video.c
+++ b/drivers/acpi/video.c
@@ -358,32 +358,36 @@ static struct output_properties acpi_output_properties = {
 
 
 /* thermal cooling device callbacks */
-static int video_get_max_state(struct thermal_cooling_device *cdev, char *buf)
+static int video_get_max_state(struct thermal_cooling_device *cdev, unsigned
+			       long *state)
 {
 	struct acpi_device *device = cdev->devdata;
 	struct acpi_video_device *video = acpi_driver_data(device);
 
-	return sprintf(buf, "%d\n", video->brightness->count - 3);
+	*state = video->brightness->count - 3;
+	return 0;
 }
 
-static int video_get_cur_state(struct thermal_cooling_device *cdev, char *buf)
+static int video_get_cur_state(struct thermal_cooling_device *cdev, unsigned
+			       long *state)
 {
 	struct acpi_device *device = cdev->devdata;
 	struct acpi_video_device *video = acpi_driver_data(device);
 	unsigned long long level;
-	int state;
+	int offset;
 
 	acpi_video_device_lcd_get_level_current(video, &level);
-	for (state = 2; state < video->brightness->count; state++)
-		if (level == video->brightness->levels[state])
-			return sprintf(buf, "%d\n",
-				       video->brightness->count - state - 1);
+	for (offset = 2; offset < video->brightness->count; offset++)
+		if (level == video->brightness->levels[offset]) {
+			*state = video->brightness->count - offset - 1;
+			return 0;
+		}
 
 	return -EINVAL;
 }
 
 static int
-video_set_cur_state(struct thermal_cooling_device *cdev, unsigned int state)
+video_set_cur_state(struct thermal_cooling_device *cdev, unsigned long state)
 {
 	struct acpi_device *device = cdev->devdata;
 	struct acpi_video_device *video = acpi_driver_data(device);
diff --git a/drivers/platform/x86/intel_menlow.c b/drivers/platform/x86/intel_menlow.c
index 27b7662955bb..29432a50be45 100644
--- a/drivers/platform/x86/intel_menlow.c
+++ b/drivers/platform/x86/intel_menlow.c
@@ -57,8 +57,8 @@ MODULE_LICENSE("GPL");
  * In that case max_cstate would be n-1
  * GTHS returning '0' would mean that no bandwidth control states are supported
  */
-static int memory_get_int_max_bandwidth(struct thermal_cooling_device *cdev,
-					unsigned long *max_state)
+static int memory_get_max_bandwidth(struct thermal_cooling_device *cdev,
+				    unsigned long *max_state)
 {
 	struct acpi_device *device = cdev->devdata;
 	acpi_handle handle = device->handle;
@@ -83,22 +83,12 @@ static int memory_get_int_max_bandwidth(struct thermal_cooling_device *cdev,
 	return 0;
 }
 
-static int memory_get_max_bandwidth(struct thermal_cooling_device *cdev,
-				    char *buf)
-{
-	unsigned long value;
-	if (memory_get_int_max_bandwidth(cdev, &value))
-		return -EINVAL;
-
-	return sprintf(buf, "%ld\n", value);
-}
-
 static int memory_get_cur_bandwidth(struct thermal_cooling_device *cdev,
-				    char *buf)
+				    unsigned long *value)
 {
 	struct acpi_device *device = cdev->devdata;
 	acpi_handle handle = device->handle;
-	unsigned long long value;
+	unsigned long long result;
 	struct acpi_object_list arg_list;
 	union acpi_object arg;
 	acpi_status status = AE_OK;
@@ -108,15 +98,16 @@ static int memory_get_cur_bandwidth(struct thermal_cooling_device *cdev,
 	arg.type = ACPI_TYPE_INTEGER;
 	arg.integer.value = MEMORY_ARG_CUR_BANDWIDTH;
 	status = acpi_evaluate_integer(handle, MEMORY_GET_BANDWIDTH,
-				       &arg_list, &value);
+				       &arg_list, &result);
 	if (ACPI_FAILURE(status))
 		return -EFAULT;
 
-	return sprintf(buf, "%llu\n", value);
+	*value = result;
+	return 0;
 }
 
 static int memory_set_cur_bandwidth(struct thermal_cooling_device *cdev,
-				    unsigned int state)
+				    unsigned long state)
 {
 	struct acpi_device *device = cdev->devdata;
 	acpi_handle handle = device->handle;
@@ -126,7 +117,7 @@ static int memory_set_cur_bandwidth(struct thermal_cooling_device *cdev,
 	unsigned long long temp;
 	unsigned long max_state;
 
-	if (memory_get_int_max_bandwidth(cdev, &max_state))
+	if (memory_get_max_bandwidth(cdev, &max_state))
 		return -EFAULT;
 
 	if (state > max_state)
@@ -142,7 +133,7 @@ static int memory_set_cur_bandwidth(struct thermal_cooling_device *cdev,
 				  &temp);
 
 	printk(KERN_INFO
-	       "Bandwidth value was %d: status is %d\n", state, status);
+	       "Bandwidth value was %ld: status is %d\n", state, status);
 	if (ACPI_FAILURE(status))
 		return -EFAULT;
 
diff --git a/drivers/thermal/thermal_sys.c b/drivers/thermal/thermal_sys.c
index 8171ca17b936..d0b093b66adc 100644
--- a/drivers/thermal/thermal_sys.c
+++ b/drivers/thermal/thermal_sys.c
@@ -30,6 +30,7 @@
 #include <linux/idr.h>
 #include <linux/thermal.h>
 #include <linux/spinlock.h>
+#include <linux/reboot.h>
 
 MODULE_AUTHOR("Zhang Rui");
 MODULE_DESCRIPTION("Generic thermal management sysfs support");
@@ -104,22 +105,36 @@ static ssize_t
 temp_show(struct device *dev, struct device_attribute *attr, char *buf)
 {
 	struct thermal_zone_device *tz = to_thermal_zone(dev);
+	long temperature;
+	int ret;
 
 	if (!tz->ops->get_temp)
 		return -EPERM;
 
-	return tz->ops->get_temp(tz, buf);
+	ret = tz->ops->get_temp(tz, &temperature);
+
+	if (ret)
+		return ret;
+
+	return sprintf(buf, "%ld\n", temperature);
 }
 
 static ssize_t
 mode_show(struct device *dev, struct device_attribute *attr, char *buf)
 {
 	struct thermal_zone_device *tz = to_thermal_zone(dev);
+	enum thermal_device_mode mode;
+	int result;
 
 	if (!tz->ops->get_mode)
 		return -EPERM;
 
-	return tz->ops->get_mode(tz, buf);
+	result = tz->ops->get_mode(tz, &mode);
+	if (result)
+		return result;
+
+	return sprintf(buf, "%s\n", mode == THERMAL_DEVICE_ENABLED ? "enabled"
+		       : "disabled");
 }
 
 static ssize_t
@@ -132,7 +147,13 @@ mode_store(struct device *dev, struct device_attribute *attr,
 	if (!tz->ops->set_mode)
 		return -EPERM;
 
-	result = tz->ops->set_mode(tz, buf);
+	if (!strncmp(buf, "enabled", sizeof("enabled")))
+		result = tz->ops->set_mode(tz, THERMAL_DEVICE_ENABLED);
+	else if (!strncmp(buf, "disabled", sizeof("disabled")))
+		result = tz->ops->set_mode(tz, THERMAL_DEVICE_DISABLED);
+	else
+		result = -EINVAL;
+
 	if (result)
 		return result;
 
@@ -144,7 +165,8 @@ trip_point_type_show(struct device *dev, struct device_attribute *attr,
 		     char *buf)
 {
 	struct thermal_zone_device *tz = to_thermal_zone(dev);
-	int trip;
+	enum thermal_trip_type type;
+	int trip, result;
 
 	if (!tz->ops->get_trip_type)
 		return -EPERM;
@@ -152,7 +174,22 @@ trip_point_type_show(struct device *dev, struct device_attribute *attr,
 	if (!sscanf(attr->attr.name, "trip_point_%d_type", &trip))
 		return -EINVAL;
 
-	return tz->ops->get_trip_type(tz, trip, buf);
+	result = tz->ops->get_trip_type(tz, trip, &type);
+	if (result)
+		return result;
+
+	switch (type) {
+	case THERMAL_TRIP_CRITICAL:
+		return sprintf(buf, "critical");
+	case THERMAL_TRIP_HOT:
+		return sprintf(buf, "hot");
+	case THERMAL_TRIP_PASSIVE:
+		return sprintf(buf, "passive");
+	case THERMAL_TRIP_ACTIVE:
+		return sprintf(buf, "active");
+	default:
+		return sprintf(buf, "unknown");
+	}
 }
 
 static ssize_t
@@ -160,7 +197,8 @@ trip_point_temp_show(struct device *dev, struct device_attribute *attr,
 		     char *buf)
 {
 	struct thermal_zone_device *tz = to_thermal_zone(dev);
-	int trip;
+	int trip, ret;
+	long temperature;
 
 	if (!tz->ops->get_trip_temp)
 		return -EPERM;
@@ -168,12 +206,77 @@ trip_point_temp_show(struct device *dev, struct device_attribute *attr,
 	if (!sscanf(attr->attr.name, "trip_point_%d_temp", &trip))
 		return -EINVAL;
 
-	return tz->ops->get_trip_temp(tz, trip, buf);
+	ret = tz->ops->get_trip_temp(tz, trip, &temperature);
+
+	if (ret)
+		return ret;
+
+	return sprintf(buf, "%ld\n", temperature);
+}
+
+static ssize_t
+passive_store(struct device *dev, struct device_attribute *attr,
+		    const char *buf, size_t count)
+{
+	struct thermal_zone_device *tz = to_thermal_zone(dev);
+	struct thermal_cooling_device *cdev = NULL;
+	int state;
+
+	if (!sscanf(buf, "%d\n", &state))
+		return -EINVAL;
+
+	if (state && !tz->forced_passive) {
+		mutex_lock(&thermal_list_lock);
+		list_for_each_entry(cdev, &thermal_cdev_list, node) {
+			if (!strncmp("Processor", cdev->type,
+				     sizeof("Processor")))
+				thermal_zone_bind_cooling_device(tz,
+								 THERMAL_TRIPS_NONE,
+								 cdev);
+		}
+		mutex_unlock(&thermal_list_lock);
+	} else if (!state && tz->forced_passive) {
+		mutex_lock(&thermal_list_lock);
+		list_for_each_entry(cdev, &thermal_cdev_list, node) {
+			if (!strncmp("Processor", cdev->type,
+				     sizeof("Processor")))
+				thermal_zone_unbind_cooling_device(tz,
+								   THERMAL_TRIPS_NONE,
+								   cdev);
+		}
+		mutex_unlock(&thermal_list_lock);
+	}
+
+	tz->tc1 = 1;
+	tz->tc2 = 1;
+
+	if (!tz->passive_delay)
+		tz->passive_delay = 1000;
+
+	if (!tz->polling_delay)
+		tz->polling_delay = 10000;
+
+	tz->forced_passive = state;
+
+	thermal_zone_device_update(tz);
+
+	return count;
+}
+
+static ssize_t
+passive_show(struct device *dev, struct device_attribute *attr,
+		   char *buf)
+{
+	struct thermal_zone_device *tz = to_thermal_zone(dev);
+
+	return sprintf(buf, "%d\n", tz->forced_passive);
 }
 
 static DEVICE_ATTR(type, 0444, type_show, NULL);
 static DEVICE_ATTR(temp, 0444, temp_show, NULL);
 static DEVICE_ATTR(mode, 0644, mode_show, mode_store);
+static DEVICE_ATTR(passive, S_IRUGO | S_IWUSR, passive_show, \
+		   passive_store);
 
 static struct device_attribute trip_point_attrs[] = {
 	__ATTR(trip_point_0_type, 0444, trip_point_type_show, NULL),
@@ -236,8 +339,13 @@ thermal_cooling_device_max_state_show(struct device *dev,
 				      struct device_attribute *attr, char *buf)
 {
 	struct thermal_cooling_device *cdev = to_cooling_device(dev);
+	unsigned long state;
+	int ret;
 
-	return cdev->ops->get_max_state(cdev, buf);
+	ret = cdev->ops->get_max_state(cdev, &state);
+	if (ret)
+		return ret;
+	return sprintf(buf, "%ld\n", state);
 }
 
 static ssize_t
@@ -245,8 +353,13 @@ thermal_cooling_device_cur_state_show(struct device *dev,
 				      struct device_attribute *attr, char *buf)
 {
 	struct thermal_cooling_device *cdev = to_cooling_device(dev);
+	unsigned long state;
+	int ret;
 
-	return cdev->ops->get_cur_state(cdev, buf);
+	ret = cdev->ops->get_cur_state(cdev, &state);
+	if (ret)
+		return ret;
+	return sprintf(buf, "%ld\n", state);
 }
 
 static ssize_t
@@ -255,10 +368,10 @@ thermal_cooling_device_cur_state_store(struct device *dev,
 				       const char *buf, size_t count)
 {
 	struct thermal_cooling_device *cdev = to_cooling_device(dev);
-	int state;
+	unsigned long state;
 	int result;
 
-	if (!sscanf(buf, "%d\n", &state))
+	if (!sscanf(buf, "%ld\n", &state))
 		return -EINVAL;
 
 	if (state < 0)
@@ -312,13 +425,20 @@ static DEVICE_ATTR(name, 0444, name_show, NULL);
 static ssize_t
 temp_input_show(struct device *dev, struct device_attribute *attr, char *buf)
 {
+	long temperature;
+	int ret;
 	struct thermal_hwmon_attr *hwmon_attr
 			= container_of(attr, struct thermal_hwmon_attr, attr);
 	struct thermal_zone_device *tz
 			= container_of(hwmon_attr, struct thermal_zone_device,
 				       temp_input);
 
-	return tz->ops->get_temp(tz, buf);
+	ret = tz->ops->get_temp(tz, &temperature);
+
+	if (ret)
+		return ret;
+
+	return sprintf(buf, "%ld\n", temperature);
 }
 
 static ssize_t
@@ -330,8 +450,14 @@ temp_crit_show(struct device *dev, struct device_attribute *attr,
 	struct thermal_zone_device *tz
 			= container_of(hwmon_attr, struct thermal_zone_device,
 				       temp_crit);
+	long temperature;
+	int ret;
+
+	ret = tz->ops->get_trip_temp(tz, 0, &temperature);
+	if (ret)
+		return ret;
 
-	return tz->ops->get_trip_temp(tz, 0, buf);
+	return sprintf(buf, "%ld\n", temperature);
 }
 
 
@@ -452,6 +578,97 @@ thermal_remove_hwmon_sysfs(struct thermal_zone_device *tz)
 }
 #endif
 
+static void thermal_zone_device_set_polling(struct thermal_zone_device *tz,
+					    int delay)
+{
+	cancel_delayed_work(&(tz->poll_queue));
+
+	if (!delay)
+		return;
+
+	if (delay > 1000)
+		schedule_delayed_work(&(tz->poll_queue),
+				      round_jiffies(msecs_to_jiffies(delay)));
+	else
+		schedule_delayed_work(&(tz->poll_queue),
+				      msecs_to_jiffies(delay));
+}
+
+static void thermal_zone_device_passive(struct thermal_zone_device *tz,
+					int temp, int trip_temp, int trip)
+{
+	int trend = 0;
+	struct thermal_cooling_device_instance *instance;
+	struct thermal_cooling_device *cdev;
+	long state, max_state;
+
+	/*
+	 * Above Trip?
+	 * -----------
+	 * Calculate the thermal trend (using the passive cooling equation)
+	 * and modify the performance limit for all passive cooling devices
+	 * accordingly.  Note that we assume symmetry.
+	 */
+	if (temp >= trip_temp) {
+		tz->passive = true;
+
+		trend = (tz->tc1 * (temp - tz->last_temperature)) +
+			(tz->tc2 * (temp - trip_temp));
+
+		/* Heating up? */
+		if (trend > 0) {
+			list_for_each_entry(instance, &tz->cooling_devices,
+					    node) {
+				if (instance->trip != trip)
+					continue;
+				cdev = instance->cdev;
+				cdev->ops->get_cur_state(cdev, &state);
+				cdev->ops->get_max_state(cdev, &max_state);
+				if (state++ < max_state)
+					cdev->ops->set_cur_state(cdev, state);
+			}
+		} else if (trend < 0) { /* Cooling off? */
+			list_for_each_entry(instance, &tz->cooling_devices,
+					    node) {
+				if (instance->trip != trip)
+					continue;
+				cdev = instance->cdev;
+				cdev->ops->get_cur_state(cdev, &state);
+				cdev->ops->get_max_state(cdev, &max_state);
+				if (state > 0)
+					cdev->ops->set_cur_state(cdev, --state);
+			}
+		}
+		return;
+	}
+
+	/*
+	 * Below Trip?
+	 * -----------
+	 * Implement passive cooling hysteresis to slowly increase performance
+	 * and avoid thrashing around the passive trip point.  Note that we
+	 * assume symmetry.
+	 */
+	list_for_each_entry(instance, &tz->cooling_devices, node) {
+		if (instance->trip != trip)
+			continue;
+		cdev = instance->cdev;
+		cdev->ops->get_cur_state(cdev, &state);
+		cdev->ops->get_max_state(cdev, &max_state);
+		if (state > 0)
+			cdev->ops->set_cur_state(cdev, --state);
+		if (state == 0)
+			tz->passive = false;
+	}
+}
+
+static void thermal_zone_device_check(struct work_struct *work)
+{
+	struct thermal_zone_device *tz = container_of(work, struct
+						      thermal_zone_device,
+						      poll_queue.work);
+	thermal_zone_device_update(tz);
+}
 
 /**
  * thermal_zone_bind_cooling_device - bind a cooling device to a thermal zone
@@ -722,25 +939,113 @@ void thermal_cooling_device_unregister(struct
 EXPORT_SYMBOL(thermal_cooling_device_unregister);
 
 /**
+ * thermal_zone_device_update - force an update of a thermal zone's state
+ * @ttz:	the thermal zone to update
+ */
+
+void thermal_zone_device_update(struct thermal_zone_device *tz)
+{
+	int count, ret = 0;
+	long temp, trip_temp;
+	enum thermal_trip_type trip_type;
+	struct thermal_cooling_device_instance *instance;
+	struct thermal_cooling_device *cdev;
+
+	mutex_lock(&tz->lock);
+
+	tz->ops->get_temp(tz, &temp);
+
+	for (count = 0; count < tz->trips; count++) {
+		tz->ops->get_trip_type(tz, count, &trip_type);
+		tz->ops->get_trip_temp(tz, count, &trip_temp);
+
+		switch (trip_type) {
+		case THERMAL_TRIP_CRITICAL:
+			if (temp > trip_temp) {
+				if (tz->ops->notify)
+					ret = tz->ops->notify(tz, count,
+							      trip_type);
+				if (!ret) {
+					printk(KERN_EMERG
+					       "Critical temperature reached (%ld C), shutting down.\n",
+					       temp/1000);
+					orderly_poweroff(true);
+				}
+			}
+			break;
+		case THERMAL_TRIP_HOT:
+			if (temp > trip_temp)
+				if (tz->ops->notify)
+					tz->ops->notify(tz, count, trip_type);
+			break;
+		case THERMAL_TRIP_ACTIVE:
+			list_for_each_entry(instance, &tz->cooling_devices,
+					    node) {
+				if (instance->trip != count)
+					continue;
+
+				cdev = instance->cdev;
+
+				if (temp > trip_temp)
+					cdev->ops->set_cur_state(cdev, 1);
+				else
+					cdev->ops->set_cur_state(cdev, 0);
+			}
+			break;
+		case THERMAL_TRIP_PASSIVE:
+			if (temp > trip_temp || tz->passive)
+				thermal_zone_device_passive(tz, temp,
+							    trip_temp, count);
+			break;
+		}
+	}
+
+	if (tz->forced_passive)
+		thermal_zone_device_passive(tz, temp, tz->forced_passive,
+					    THERMAL_TRIPS_NONE);
+
+	tz->last_temperature = temp;
+	if (tz->passive)
+		thermal_zone_device_set_polling(tz, tz->passive_delay);
+	else if (tz->polling_delay)
+		thermal_zone_device_set_polling(tz, tz->polling_delay);
+	mutex_unlock(&tz->lock);
+}
+EXPORT_SYMBOL(thermal_zone_device_update);
+
+/**
  * thermal_zone_device_register - register a new thermal zone device
  * @type:	the thermal zone device type
  * @trips:	the number of trip points the thermal zone support
  * @devdata:	private device data
  * @ops:	standard thermal zone device callbacks
+ * @tc1:	thermal coefficient 1 for passive calculations
+ * @tc2:	thermal coefficient 2 for passive calculations
+ * @passive_delay: number of milliseconds to wait between polls when
+ *		   performing passive cooling
+ * @polling_delay: number of milliseconds to wait between polls when checking
+ *		   whether trip points have been crossed (0 for interrupt
+ *		   driven systems)
  *
  * thermal_zone_device_unregister() must be called when the device is no
- * longer needed.
+ * longer needed. The passive cooling formula uses tc1 and tc2 as described in
+ * section 11.1.5.1 of the ACPI specification 3.0.
  */
 struct thermal_zone_device *thermal_zone_device_register(char *type,
 							 int trips,
 							 void *devdata, struct
 							 thermal_zone_device_ops
-							 *ops)
+							 *ops, int tc1, int
+							 tc2,
+							 int passive_delay,
+							 int polling_delay)
 {
 	struct thermal_zone_device *tz;
 	struct thermal_cooling_device *pos;
+	enum thermal_trip_type trip_type;
 	int result;
 	int count;
+	int passive = 0;
 
 	if (strlen(type) >= THERMAL_NAME_LENGTH)
 		return ERR_PTR(-EINVAL);
@@ -769,6 +1074,11 @@ struct thermal_zone_device *thermal_zone_device_register(char *type,
 	tz->device.class = &thermal_class;
 	tz->devdata = devdata;
 	tz->trips = trips;
+	tz->tc1 = tc1;
+	tz->tc2 = tc2;
+	tz->passive_delay = passive_delay;
+	tz->polling_delay = polling_delay;
+
 	dev_set_name(&tz->device, "thermal_zone%d", tz->id);
 	result = device_register(&tz->device);
 	if (result) {
@@ -798,8 +1108,18 @@ struct thermal_zone_device *thermal_zone_device_register(char *type,
 		TRIP_POINT_ATTR_ADD(&tz->device, count, result);
 		if (result)
 			goto unregister;
+		tz->ops->get_trip_type(tz, count, &trip_type);
+		if (trip_type == THERMAL_TRIP_PASSIVE)
+			passive = 1;
 	}
 
+	if (!passive)
+		result = device_create_file(&tz->device,
+					    &dev_attr_passive);
+
+	if (result)
+		goto unregister;
+
 	result = thermal_add_hwmon_sysfs(tz);
 	if (result)
 		goto unregister;
@@ -814,6 +1134,10 @@ struct thermal_zone_device *thermal_zone_device_register(char *type,
 		}
 	mutex_unlock(&thermal_list_lock);
 
+	INIT_DELAYED_WORK(&(tz->poll_queue), thermal_zone_device_check);
+
+	thermal_zone_device_update(tz);
+
 	if (!result)
 		return tz;
 
@@ -853,6 +1177,8 @@ void thermal_zone_device_unregister(struct thermal_zone_device *tz)
 		    tz->ops->unbind(tz, cdev);
 	mutex_unlock(&thermal_list_lock);
 
+	thermal_zone_device_set_polling(tz, 0);
+
 	if (tz->type[0])
 		device_remove_file(&tz->device, &dev_attr_type);
 	device_remove_file(&tz->device, &dev_attr_temp);