Merge branch 'hwmon-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6

* 'hwmon-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6:
  hwmon: Add MAINTAINERS entry for new ams driver
  hwmon: New AMS hardware monitoring driver
  hwmon/w83793: Add documentation and maintainer
  hwmon: New Winbond W83793 hardware monitoring driver
  hwmon: Update Rudolf Marek's e-mail address
  hwmon/f71805f: Fix the device address decoding
  hwmon/f71805f: Always create all fan inputs
  hwmon/f71805f: Add support for the Fintek F71872F/FG chip
  hwmon: New PC87427 hardware monitoring driver
  hwmon/it87: Remove the SMBus interface support
  hwmon/hdaps: Update the list of supported devices
  hwmon/hdaps: Move the DMI detection data to .data
  hwmon/pc87360: Autodetect the VRM version
  hwmon/f71805f: Document the fan control features
  hwmon/f71805f: Add support for "speed mode" fan speed control
  hwmon/f71805f: Support DC fan speed control mode
  hwmon/f71805f: Let the user adjust the PWM base frequency
  hwmon/f71805f: Add manual fan speed control
  hwmon/f71805f: Store the fan control registers

19 files changed, 3883 insertions, 278 deletions

diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index e76d91906c99..891ef6d0b1bf 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -106,6 +106,31 @@ config SENSORS_K8TEMP
 	  This driver can also be built as a module.  If so, the module
 	  will be called k8temp.
 
+config SENSORS_AMS
+	tristate "Apple Motion Sensor driver"
+	depends on HWMON && PPC_PMAC && !PPC64 && INPUT && ((ADB_PMU && I2C = y) || (ADB_PMU && !I2C) || I2C) && EXPERIMENTAL
+	help
+	  Support for the motion sensor included in PowerBooks. Includes
+	  implementations for PMU and I2C.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called ams.
+
+config SENSORS_AMS_PMU
+	bool "PMU variant"
+	depends on SENSORS_AMS && ADB_PMU
+	default y
+	help
+	  PMU variant of motion sensor, found in late 2005 PowerBooks.
+
+config SENSORS_AMS_I2C
+	bool "I2C variant"
+	depends on SENSORS_AMS && I2C
+	default y
+	help
+	  I2C variant of motion sensor, found in early 2005 PowerBooks and
+	  iBooks.
+
 config SENSORS_ASB100
 	tristate "Asus ASB100 Bach"
 	depends on HWMON && I2C && EXPERIMENTAL
@@ -142,11 +167,12 @@ config SENSORS_DS1621
 	  will be called ds1621.
 
 config SENSORS_F71805F
-	tristate "Fintek F71805F/FG"
+	tristate "Fintek F71805F/FG and F71872F/FG"
 	depends on HWMON && EXPERIMENTAL
 	help
 	  If you say yes here you get support for hardware monitoring
-	  features of the Fintek F71805F/FG chips.
+	  features of the Fintek F71805F/FG and F71872F/FG Super-I/O
+	  chips.
 
 	  This driver can also be built as a module.  If so, the module
 	  will be called f71805f.
@@ -353,6 +379,19 @@ config SENSORS_PC87360
 	  This driver can also be built as a module.  If so, the module
 	  will be called pc87360.
 
+config SENSORS_PC87427
+	tristate "National Semiconductor PC87427"
+	depends on HWMON && EXPERIMENTAL
+	help
+	  If you say yes here you get access to the hardware monitoring
+	  functions of the National Semiconductor PC87427 Super-I/O chip.
+	  The chip has two distinct logical devices, one for fan speed
+	  monitoring and control, and one for voltage and temperature
+	  monitoring. Only fan speed monitoring is supported right now.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called pc87427.
+
 config SENSORS_SIS5595
 	tristate "Silicon Integrated Systems Corp. SiS5595"
 	depends on HWMON && I2C && PCI && EXPERIMENTAL
@@ -474,6 +513,16 @@ config SENSORS_W83792D
 	  This driver can also be built as a module.  If so, the module
 	  will be called w83792d.
 
+config SENSORS_W83793
+	tristate "Winbond W83793"
+	depends on HWMON && I2C && EXPERIMENTAL
+	help
+	  If you say yes here you get support for the Winbond W83793
+	  hardware monitoring chip.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called w83793.
+
 config SENSORS_W83L785TS
 	tristate "Winbond W83L785TS-S"
 	depends on HWMON && I2C && EXPERIMENTAL
@@ -527,6 +576,9 @@ config SENSORS_HDAPS
 	  This driver also provides an absolute input class device, allowing
 	  the laptop to act as a pinball machine-esque joystick.
 
+	  If your ThinkPad is not recognized by the driver, please update to latest
+	  BIOS. This is especially the case for some R52 ThinkPads.
+
 	  Say Y here if you have an applicable laptop and want to experience
 	  the awesome power of hdaps.
 
diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile
index af01cc64f7d2..31661124271e 100644
--- a/drivers/hwmon/Makefile
+++ b/drivers/hwmon/Makefile
@@ -9,6 +9,7 @@ obj-$(CONFIG_HWMON_VID)		+= hwmon-vid.o
 obj-$(CONFIG_SENSORS_ASB100)	+= asb100.o
 obj-$(CONFIG_SENSORS_W83627HF)	+= w83627hf.o
 obj-$(CONFIG_SENSORS_W83792D)	+= w83792d.o
+obj-$(CONFIG_SENSORS_W83793)	+= w83793.o
 obj-$(CONFIG_SENSORS_W83781D)	+= w83781d.o
 obj-$(CONFIG_SENSORS_W83791D)	+= w83791d.o
 
@@ -18,6 +19,7 @@ obj-$(CONFIG_SENSORS_ADM1025)	+= adm1025.o
 obj-$(CONFIG_SENSORS_ADM1026)	+= adm1026.o
 obj-$(CONFIG_SENSORS_ADM1031)	+= adm1031.o
 obj-$(CONFIG_SENSORS_ADM9240)	+= adm9240.o
+obj-$(CONFIG_SENSORS_AMS)	+= ams/
 obj-$(CONFIG_SENSORS_ATXP1)	+= atxp1.o
 obj-$(CONFIG_SENSORS_DS1621)	+= ds1621.o
 obj-$(CONFIG_SENSORS_F71805F)	+= f71805f.o
@@ -41,6 +43,7 @@ obj-$(CONFIG_SENSORS_LM90)	+= lm90.o
 obj-$(CONFIG_SENSORS_LM92)	+= lm92.o
 obj-$(CONFIG_SENSORS_MAX1619)	+= max1619.o
 obj-$(CONFIG_SENSORS_PC87360)	+= pc87360.o
+obj-$(CONFIG_SENSORS_PC87427)	+= pc87427.o
 obj-$(CONFIG_SENSORS_SIS5595)	+= sis5595.o
 obj-$(CONFIG_SENSORS_SMSC47B397)+= smsc47b397.o
 obj-$(CONFIG_SENSORS_SMSC47M1)	+= smsc47m1.o
diff --git a/drivers/hwmon/ams/Makefile b/drivers/hwmon/ams/Makefile
new file mode 100644
index 000000000000..41c95b2089dc
--- /dev/null
+++ b/drivers/hwmon/ams/Makefile
@@ -0,0 +1,8 @@
+#
+# Makefile for Apple Motion Sensor driver
+#
+
+ams-y					:= ams-core.o ams-input.o
+ams-$(CONFIG_SENSORS_AMS_PMU)		+= ams-pmu.o
+ams-$(CONFIG_SENSORS_AMS_I2C)		+= ams-i2c.o
+obj-$(CONFIG_SENSORS_AMS)		+= ams.o
diff --git a/drivers/hwmon/ams/ams-core.c b/drivers/hwmon/ams/ams-core.c
new file mode 100644
index 000000000000..f1f0f5d0442c
--- /dev/null
+++ b/drivers/hwmon/ams/ams-core.c
@@ -0,0 +1,265 @@
+/*
+ * Apple Motion Sensor driver
+ *
+ * Copyright (C) 2005 Stelian Pop (stelian@popies.net)
+ * Copyright (C) 2006 Michael Hanselmann (linux-kernel@hansmi.ch)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <asm/pmac_pfunc.h>
+#include <asm/of_platform.h>
+
+#include "ams.h"
+
+/* There is only one motion sensor per machine */
+struct ams ams_info;
+
+static unsigned int verbose;
+module_param(verbose, bool, 0644);
+MODULE_PARM_DESC(verbose, "Show free falls and shocks in kernel output");
+
+/* Call with ams_info.lock held! */
+void ams_sensors(s8 *x, s8 *y, s8 *z)
+{
+	u32 orient = ams_info.vflag? ams_info.orient1 : ams_info.orient2;
+
+	if (orient & 0x80)
+		/* X and Y swapped */
+		ams_info.get_xyz(y, x, z);
+	else
+		ams_info.get_xyz(x, y, z);
+
+	if (orient & 0x04)
+		*z = ~(*z);
+	if (orient & 0x02)
+		*y = ~(*y);
+	if (orient & 0x01)
+		*x = ~(*x);
+}
+
+static ssize_t ams_show_current(struct device *dev,
+	struct device_attribute *attr, char *buf)
+{
+	s8 x, y, z;
+
+	mutex_lock(&ams_info.lock);
+	ams_sensors(&x, &y, &z);
+	mutex_unlock(&ams_info.lock);
+
+	return snprintf(buf, PAGE_SIZE, "%d %d %d\n", x, y, z);
+}
+
+static DEVICE_ATTR(current, S_IRUGO, ams_show_current, NULL);
+
+static void ams_handle_irq(void *data)
+{
+	enum ams_irq irq = *((enum ams_irq *)data);
+
+	spin_lock(&ams_info.irq_lock);
+
+	ams_info.worker_irqs |= irq;
+	schedule_work(&ams_info.worker);
+
+	spin_unlock(&ams_info.irq_lock);
+}
+
+static enum ams_irq ams_freefall_irq_data = AMS_IRQ_FREEFALL;
+static struct pmf_irq_client ams_freefall_client = {
+	.owner = THIS_MODULE,
+	.handler = ams_handle_irq,
+	.data = &ams_freefall_irq_data,
+};
+
+static enum ams_irq ams_shock_irq_data = AMS_IRQ_SHOCK;
+static struct pmf_irq_client ams_shock_client = {
+	.owner = THIS_MODULE,
+	.handler = ams_handle_irq,
+	.data = &ams_shock_irq_data,
+};
+
+/* Once hard disk parking is implemented in the kernel, this function can
+ * trigger it.
+ */
+static void ams_worker(struct work_struct *work)
+{
+	mutex_lock(&ams_info.lock);
+
+	if (ams_info.has_device) {
+		unsigned long flags;
+
+		spin_lock_irqsave(&ams_info.irq_lock, flags);
+
+		if (ams_info.worker_irqs & AMS_IRQ_FREEFALL) {
+			if (verbose)
+				printk(KERN_INFO "ams: freefall detected!\n");
+
+			ams_info.worker_irqs &= ~AMS_IRQ_FREEFALL;
+
+			/* we must call this with interrupts enabled */
+			spin_unlock_irqrestore(&ams_info.irq_lock, flags);
+			ams_info.clear_irq(AMS_IRQ_FREEFALL);
+			spin_lock_irqsave(&ams_info.irq_lock, flags);
+		}
+
+		if (ams_info.worker_irqs & AMS_IRQ_SHOCK) {
+			if (verbose)
+				printk(KERN_INFO "ams: shock detected!\n");
+
+			ams_info.worker_irqs &= ~AMS_IRQ_SHOCK;
+
+			/* we must call this with interrupts enabled */
+			spin_unlock_irqrestore(&ams_info.irq_lock, flags);
+			ams_info.clear_irq(AMS_IRQ_SHOCK);
+			spin_lock_irqsave(&ams_info.irq_lock, flags);
+		}
+
+		spin_unlock_irqrestore(&ams_info.irq_lock, flags);
+	}
+
+	mutex_unlock(&ams_info.lock);
+}
+
+/* Call with ams_info.lock held! */
+int ams_sensor_attach(void)
+{
+	int result;
+	u32 *prop;
+
+	/* Get orientation */
+	prop = (u32*)get_property(ams_info.of_node, "orientation", NULL);
+	if (!prop)
+		return -ENODEV;
+	ams_info.orient1 = *prop;
+	ams_info.orient2 = *(prop + 1);
+
+	/* Register freefall interrupt handler */
+	result = pmf_register_irq_client(ams_info.of_node,
+			"accel-int-1",
+			&ams_freefall_client);
+	if (result < 0)
+		return -ENODEV;
+
+	/* Reset saved irqs */
+	ams_info.worker_irqs = 0;
+
+	/* Register shock interrupt handler */
+	result = pmf_register_irq_client(ams_info.of_node,
+			"accel-int-2",
+			&ams_shock_client);
+	if (result < 0)
+		goto release_freefall;
+
+	/* Create device */
+	ams_info.of_dev = of_platform_device_create(ams_info.of_node, "ams", NULL);
+	if (!ams_info.of_dev) {
+		result = -ENODEV;
+		goto release_shock;
+	}
+
+	/* Create attributes */
+	result = device_create_file(&ams_info.of_dev->dev, &dev_attr_current);
+	if (result)
+		goto release_of;
+
+	ams_info.vflag = !!(ams_info.get_vendor() & 0x10);
+
+	/* Init input device */
+	result = ams_input_init();
+	if (result)
+		goto release_device_file;
+
+	return result;
+release_device_file:
+	device_remove_file(&ams_info.of_dev->dev, &dev_attr_current);
+release_of:
+	of_device_unregister(ams_info.of_dev);
+release_shock:
+	pmf_unregister_irq_client(&ams_shock_client);
+release_freefall:
+	pmf_unregister_irq_client(&ams_freefall_client);
+	return result;
+}
+
+int __init ams_init(void)
+{
+	struct device_node *np;
+
+	spin_lock_init(&ams_info.irq_lock);
+	mutex_init(&ams_info.lock);
+	INIT_WORK(&ams_info.worker, ams_worker);
+
+#ifdef CONFIG_SENSORS_AMS_I2C
+	np = of_find_node_by_name(NULL, "accelerometer");
+	if (np && device_is_compatible(np, "AAPL,accelerometer_1"))
+		/* Found I2C motion sensor */
+		return ams_i2c_init(np);
+#endif
+
+#ifdef CONFIG_SENSORS_AMS_PMU
+	np = of_find_node_by_name(NULL, "sms");
+	if (np && device_is_compatible(np, "sms"))
+		/* Found PMU motion sensor */
+		return ams_pmu_init(np);
+#endif
+
+	printk(KERN_ERR "ams: No motion sensor found.\n");
+
+	return -ENODEV;
+}
+
+void ams_exit(void)
+{
+	mutex_lock(&ams_info.lock);
+
+	if (ams_info.has_device) {
+		/* Remove input device */
+		ams_input_exit();
+
+		/* Shut down implementation */
+		ams_info.exit();
+
+		/* Flush interrupt worker
+		 *
+		 * We do this after ams_info.exit(), because an interrupt might
+		 * have arrived before disabling them.
+		 */
+		flush_scheduled_work();
+
+		/* Remove attributes */
+		device_remove_file(&ams_info.of_dev->dev, &dev_attr_current);
+
+		/* Remove device */
+		of_device_unregister(ams_info.of_dev);
+
+		/* Remove handler */
+		pmf_unregister_irq_client(&ams_shock_client);
+		pmf_unregister_irq_client(&ams_freefall_client);
+	}
+
+	mutex_unlock(&ams_info.lock);
+}
+
+MODULE_AUTHOR("Stelian Pop, Michael Hanselmann");
+MODULE_DESCRIPTION("Apple Motion Sensor driver");
+MODULE_LICENSE("GPL");
+
+module_init(ams_init);
+module_exit(ams_exit);
diff --git a/drivers/hwmon/ams/ams-i2c.c b/drivers/hwmon/ams/ams-i2c.c
new file mode 100644
index 000000000000..0d24bdfea53e
--- /dev/null
+++ b/drivers/hwmon/ams/ams-i2c.c
@@ -0,0 +1,299 @@
+/*
+ * Apple Motion Sensor driver (I2C variant)
+ *
+ * Copyright (C) 2005 Stelian Pop (stelian@popies.net)
+ * Copyright (C) 2006 Michael Hanselmann (linux-kernel@hansmi.ch)
+ *
+ * Clean room implementation based on the reverse engineered Mac OS X driver by
+ * Johannes Berg <johannes@sipsolutions.net>, documentation available at
+ * http://johannes.sipsolutions.net/PowerBook/Apple_Motion_Sensor_Specification
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+
+#include "ams.h"
+
+/* AMS registers */
+#define AMS_COMMAND	0x00	/* command register */
+#define AMS_STATUS	0x01	/* status register */
+#define AMS_CTRL1	0x02	/* read control 1 (number of values) */
+#define AMS_CTRL2	0x03	/* read control 2 (offset?) */
+#define AMS_CTRL3	0x04	/* read control 3 (size of each value?) */
+#define AMS_DATA1	0x05	/* read data 1 */
+#define AMS_DATA2	0x06	/* read data 2 */
+#define AMS_DATA3	0x07	/* read data 3 */
+#define AMS_DATA4	0x08	/* read data 4 */
+#define AMS_DATAX	0x20	/* data X */
+#define AMS_DATAY	0x21	/* data Y */
+#define AMS_DATAZ	0x22	/* data Z */
+#define AMS_FREEFALL	0x24	/* freefall int control */
+#define AMS_SHOCK	0x25	/* shock int control */
+#define AMS_SENSLOW	0x26	/* sensitivity low limit */
+#define AMS_SENSHIGH	0x27	/* sensitivity high limit */
+#define AMS_CTRLX	0x28	/* control X */
+#define AMS_CTRLY	0x29	/* control Y */
+#define AMS_CTRLZ	0x2A	/* control Z */
+#define AMS_UNKNOWN1	0x2B	/* unknown 1 */
+#define AMS_UNKNOWN2	0x2C	/* unknown 2 */
+#define AMS_UNKNOWN3	0x2D	/* unknown 3 */
+#define AMS_VENDOR	0x2E	/* vendor */
+
+/* AMS commands - use with the AMS_COMMAND register */
+enum ams_i2c_cmd {
+	AMS_CMD_NOOP = 0,
+	AMS_CMD_VERSION,
+	AMS_CMD_READMEM,
+	AMS_CMD_WRITEMEM,
+	AMS_CMD_ERASEMEM,
+	AMS_CMD_READEE,
+	AMS_CMD_WRITEEE,
+	AMS_CMD_RESET,
+	AMS_CMD_START,
+};
+
+static int ams_i2c_attach(struct i2c_adapter *adapter);
+static int ams_i2c_detach(struct i2c_adapter *adapter);
+
+static struct i2c_driver ams_i2c_driver = {
+	.driver = {
+		.name   = "ams",
+		.owner  = THIS_MODULE,
+	},
+	.attach_adapter = ams_i2c_attach,
+	.detach_adapter = ams_i2c_detach,
+};
+
+static s32 ams_i2c_read(u8 reg)
+{
+	return i2c_smbus_read_byte_data(&ams_info.i2c_client, reg);
+}
+
+static int ams_i2c_write(u8 reg, u8 value)
+{
+	return i2c_smbus_write_byte_data(&ams_info.i2c_client, reg, value);
+}
+
+static int ams_i2c_cmd(enum ams_i2c_cmd cmd)
+{
+	s32 result;
+	int remaining = HZ / 20;
+
+	ams_i2c_write(AMS_COMMAND, cmd);
+	mdelay(5);
+
+	while (remaining) {
+		result = ams_i2c_read(AMS_COMMAND);
+		if (result == 0 || result & 0x80)
+			return 0;
+
+		remaining = schedule_timeout(remaining);
+	}
+
+	return -1;
+}
+
+static void ams_i2c_set_irq(enum ams_irq reg, char enable)
+{
+	if (reg & AMS_IRQ_FREEFALL) {
+		u8 val = ams_i2c_read(AMS_CTRLX);
+		if (enable)
+			val |= 0x80;
+		else
+			val &= ~0x80;
+		ams_i2c_write(AMS_CTRLX, val);
+	}
+
+	if (reg & AMS_IRQ_SHOCK) {
+		u8 val = ams_i2c_read(AMS_CTRLY);
+		if (enable)
+			val |= 0x80;
+		else
+			val &= ~0x80;
+		ams_i2c_write(AMS_CTRLY, val);
+	}
+
+	if (reg & AMS_IRQ_GLOBAL) {
+		u8 val = ams_i2c_read(AMS_CTRLZ);
+		if (enable)
+			val |= 0x80;
+		else
+			val &= ~0x80;
+		ams_i2c_write(AMS_CTRLZ, val);
+	}
+}
+
+static void ams_i2c_clear_irq(enum ams_irq reg)
+{
+	if (reg & AMS_IRQ_FREEFALL)
+		ams_i2c_write(AMS_FREEFALL, 0);
+
+	if (reg & AMS_IRQ_SHOCK)
+		ams_i2c_write(AMS_SHOCK, 0);
+}
+
+static u8 ams_i2c_get_vendor(void)
+{
+	return ams_i2c_read(AMS_VENDOR);
+}
+
+static void ams_i2c_get_xyz(s8 *x, s8 *y, s8 *z)
+{
+	*x = ams_i2c_read(AMS_DATAX);
+	*y = ams_i2c_read(AMS_DATAY);
+	*z = ams_i2c_read(AMS_DATAZ);
+}
+
+static int ams_i2c_attach(struct i2c_adapter *adapter)
+{
+	unsigned long bus;
+	int vmaj, vmin;
+	int result;
+
+	/* There can be only one */
+	if (unlikely(ams_info.has_device))
+		return -ENODEV;
+
+	if (strncmp(adapter->name, "uni-n", 5))
+		return -ENODEV;
+
+	bus = simple_strtoul(adapter->name + 6, NULL, 10);
+	if (bus != ams_info.i2c_bus)
+		return -ENODEV;
+
+	ams_info.i2c_client.addr = ams_info.i2c_address;
+	ams_info.i2c_client.adapter = adapter;
+	ams_info.i2c_client.driver = &ams_i2c_driver;
+	strcpy(ams_info.i2c_client.name, "Apple Motion Sensor");
+
+	if (ams_i2c_cmd(AMS_CMD_RESET)) {
+		printk(KERN_INFO "ams: Failed to reset the device\n");
+		return -ENODEV;
+	}
+
+	if (ams_i2c_cmd(AMS_CMD_START)) {
+		printk(KERN_INFO "ams: Failed to start the device\n");
+		return -ENODEV;
+	}
+
+	/* get version/vendor information */
+	ams_i2c_write(AMS_CTRL1, 0x02);
+	ams_i2c_write(AMS_CTRL2, 0x85);
+	ams_i2c_write(AMS_CTRL3, 0x01);
+
+	ams_i2c_cmd(AMS_CMD_READMEM);
+
+	vmaj = ams_i2c_read(AMS_DATA1);
+	vmin = ams_i2c_read(AMS_DATA2);
+	if (vmaj != 1 || vmin != 52) {
+		printk(KERN_INFO "ams: Incorrect device version (%d.%d)\n",
+			vmaj, vmin);
+		return -ENODEV;
+	}
+
+	ams_i2c_cmd(AMS_CMD_VERSION);
+
+	vmaj = ams_i2c_read(AMS_DATA1);
+	vmin = ams_i2c_read(AMS_DATA2);
+	if (vmaj != 0 || vmin != 1) {
+		printk(KERN_INFO "ams: Incorrect firmware version (%d.%d)\n",
+			vmaj, vmin);
+		return -ENODEV;
+	}
+
+	/* Disable interrupts */
+	ams_i2c_set_irq(AMS_IRQ_ALL, 0);
+
+	result = ams_sensor_attach();
+	if (result < 0)
+		return result;
+
+	/* Set default values */
+	ams_i2c_write(AMS_SENSLOW, 0x15);
+	ams_i2c_write(AMS_SENSHIGH, 0x60);
+	ams_i2c_write(AMS_CTRLX, 0x08);
+	ams_i2c_write(AMS_CTRLY, 0x0F);
+	ams_i2c_write(AMS_CTRLZ, 0x4F);
+	ams_i2c_write(AMS_UNKNOWN1, 0x14);
+
+	/* Clear interrupts */
+	ams_i2c_clear_irq(AMS_IRQ_ALL);
+
+	ams_info.has_device = 1;
+
+	/* Enable interrupts */
+	ams_i2c_set_irq(AMS_IRQ_ALL, 1);
+
+	printk(KERN_INFO "ams: Found I2C based motion sensor\n");
+
+	return 0;
+}
+
+static int ams_i2c_detach(struct i2c_adapter *adapter)
+{
+	if (ams_info.has_device) {
+		/* Disable interrupts */
+		ams_i2c_set_irq(AMS_IRQ_ALL, 0);
+
+		/* Clear interrupts */
+		ams_i2c_clear_irq(AMS_IRQ_ALL);
+
+		printk(KERN_INFO "ams: Unloading\n");
+
+		ams_info.has_device = 0;
+	}
+
+	return 0;
+}
+
+static void ams_i2c_exit(void)
+{
+	i2c_del_driver(&ams_i2c_driver);
+}
+
+int __init ams_i2c_init(struct device_node *np)
+{
+	char *tmp_bus;
+	int result;
+	u32 *prop;
+
+	mutex_lock(&ams_info.lock);
+
+	/* Set implementation stuff */
+	ams_info.of_node = np;
+	ams_info.exit = ams_i2c_exit;
+	ams_info.get_vendor = ams_i2c_get_vendor;
+	ams_info.get_xyz = ams_i2c_get_xyz;
+	ams_info.clear_irq = ams_i2c_clear_irq;
+	ams_info.bustype = BUS_I2C;
+
+	/* look for bus either using "reg" or by path */
+	prop = (u32*)get_property(ams_info.of_node, "reg", NULL);
+	if (!prop) {
+		result = -ENODEV;
+
+		goto exit;
+	}
+
+	tmp_bus = strstr(ams_info.of_node->full_name, "/i2c-bus@");
+	if (tmp_bus)
+		ams_info.i2c_bus = *(tmp_bus + 9) - '0';
+	else
+		ams_info.i2c_bus = ((*prop) >> 8) & 0x0f;
+	ams_info.i2c_address = ((*prop) & 0xff) >> 1;
+
+	result = i2c_add_driver(&ams_i2c_driver);
+
+exit:
+	mutex_unlock(&ams_info.lock);
+
+	return result;
+}
diff --git a/drivers/hwmon/ams/ams-input.c b/drivers/hwmon/ams/ams-input.c
new file mode 100644
index 000000000000..f126aa485134
--- /dev/null
+++ b/drivers/hwmon/ams/ams-input.c
@@ -0,0 +1,160 @@
+/*
+ * Apple Motion Sensor driver (joystick emulation)
+ *
+ * Copyright (C) 2005 Stelian Pop (stelian@popies.net)
+ * Copyright (C) 2006 Michael Hanselmann (linux-kernel@hansmi.ch)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/module.h>
+
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+
+#include "ams.h"
+
+static unsigned int joystick;
+module_param(joystick, bool, 0644);
+MODULE_PARM_DESC(joystick, "Enable the input class device on module load");
+
+static unsigned int invert;
+module_param(invert, bool, 0644);
+MODULE_PARM_DESC(invert, "Invert input data on X and Y axis");
+
+static int ams_input_kthread(void *data)
+{
+	s8 x, y, z;
+
+	while (!kthread_should_stop()) {
+		mutex_lock(&ams_info.lock);
+
+		ams_sensors(&x, &y, &z);
+
+		x -= ams_info.xcalib;
+		y -= ams_info.ycalib;
+		z -= ams_info.zcalib;
+
+		input_report_abs(ams_info.idev, ABS_X, invert ? -x : x);
+		input_report_abs(ams_info.idev, ABS_Y, invert ? -y : y);
+		input_report_abs(ams_info.idev, ABS_Z, z);
+
+		input_sync(ams_info.idev);
+
+		mutex_unlock(&ams_info.lock);
+
+		msleep(25);
+	}
+
+	return 0;
+}
+
+static int ams_input_open(struct input_dev *dev)
+{
+	ams_info.kthread = kthread_run(ams_input_kthread, NULL, "kams");
+	return IS_ERR(ams_info.kthread) ? PTR_ERR(ams_info.kthread) : 0;
+}
+
+static void ams_input_close(struct input_dev *dev)
+{
+	kthread_stop(ams_info.kthread);
+}
+
+/* Call with ams_info.lock held! */
+static void ams_input_enable(void)
+{
+	s8 x, y, z;
+
+	if (ams_info.idev)
+		return;
+
+	ams_sensors(&x, &y, &z);
+	ams_info.xcalib = x;
+	ams_info.ycalib = y;
+	ams_info.zcalib = z;
+
+	ams_info.idev = input_allocate_device();
+	if (!ams_info.idev)
+		return;
+
+	ams_info.idev->name = "Apple Motion Sensor";
+	ams_info.idev->id.bustype = ams_info.bustype;
+	ams_info.idev->id.vendor = 0;
+	ams_info.idev->open = ams_input_open;
+	ams_info.idev->close = ams_input_close;
+	ams_info.idev->cdev.dev = &ams_info.of_dev->dev;
+
+	input_set_abs_params(ams_info.idev, ABS_X, -50, 50, 3, 0);
+	input_set_abs_params(ams_info.idev, ABS_Y, -50, 50, 3, 0);
+	input_set_abs_params(ams_info.idev, ABS_Z, -50, 50, 3, 0);
+
+	set_bit(EV_ABS, ams_info.idev->evbit);
+	set_bit(EV_KEY, ams_info.idev->evbit);
+	set_bit(BTN_TOUCH, ams_info.idev->keybit);
+
+	if (input_register_device(ams_info.idev)) {
+		input_free_device(ams_info.idev);
+		ams_info.idev = NULL;
+		return;
+	}
+}
+
+/* Call with ams_info.lock held! */
+static void ams_input_disable(void)
+{
+	if (ams_info.idev) {
+		input_unregister_device(ams_info.idev);
+		ams_info.idev = NULL;
+	}
+}
+
+static ssize_t ams_input_show_joystick(struct device *dev,
+	struct device_attribute *attr, char *buf)
+{
+	return sprintf(buf, "%d\n", joystick);
+}
+
+static ssize_t ams_input_store_joystick(struct device *dev,
+	struct device_attribute *attr, const char *buf, size_t count)
+{
+	if (sscanf(buf, "%d\n", &joystick) != 1)
+		return -EINVAL;
+
+	mutex_lock(&ams_info.lock);
+
+	if (joystick)
+		ams_input_enable();
+	else
+		ams_input_disable();
+
+	mutex_unlock(&ams_info.lock);
+
+	return count;
+}
+
+static DEVICE_ATTR(joystick, S_IRUGO | S_IWUSR,
+	ams_input_show_joystick, ams_input_store_joystick);
+
+/* Call with ams_info.lock held! */
+int ams_input_init(void)
+{
+	int result;
+
+	result = device_create_file(&ams_info.of_dev->dev, &dev_attr_joystick);
+
+	if (!result && joystick)
+		ams_input_enable();
+	return result;
+}
+
+/* Call with ams_info.lock held! */
+void ams_input_exit()
+{
+	ams_input_disable();
+	device_remove_file(&ams_info.of_dev->dev, &dev_attr_joystick);
+}
diff --git a/drivers/hwmon/ams/ams-pmu.c b/drivers/hwmon/ams/ams-pmu.c
new file mode 100644
index 000000000000..4636ae031a53
--- /dev/null
+++ b/drivers/hwmon/ams/ams-pmu.c
@@ -0,0 +1,207 @@
+/*
+ * Apple Motion Sensor driver (PMU variant)
+ *
+ * Copyright (C) 2006 Michael Hanselmann (linux-kernel@hansmi.ch)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/adb.h>
+#include <linux/pmu.h>
+
+#include "ams.h"
+
+/* Attitude */
+#define AMS_X			0x00
+#define AMS_Y			0x01
+#define AMS_Z			0x02
+
+/* Not exactly known, maybe chip vendor */
+#define AMS_VENDOR		0x03
+
+/* Freefall registers */
+#define AMS_FF_CLEAR		0x04
+#define AMS_FF_ENABLE		0x05
+#define AMS_FF_LOW_LIMIT	0x06
+#define AMS_FF_DEBOUNCE		0x07
+
+/* Shock registers */
+#define AMS_SHOCK_CLEAR		0x08
+#define AMS_SHOCK_ENABLE	0x09
+#define AMS_SHOCK_HIGH_LIMIT	0x0a
+#define AMS_SHOCK_DEBOUNCE	0x0b
+
+/* Global interrupt and power control register */
+#define AMS_CONTROL		0x0c
+
+static u8 ams_pmu_cmd;
+
+static void ams_pmu_req_complete(struct adb_request *req)
+{
+	complete((struct completion *)req->arg);
+}
+
+/* Only call this function from task context */
+static void ams_pmu_set_register(u8 reg, u8 value)
+{
+	static struct adb_request req;
+	DECLARE_COMPLETION(req_complete);
+
+	req.arg = &req_complete;
+	if (pmu_request(&req, ams_pmu_req_complete, 4, ams_pmu_cmd, 0x00, reg, value))
+		return;
+
+	wait_for_completion(&req_complete);
+}
+
+/* Only call this function from task context */
+static u8 ams_pmu_get_register(u8 reg)
+{
+	static struct adb_request req;
+	DECLARE_COMPLETION(req_complete);
+
+	req.arg = &req_complete;
+	if (pmu_request(&req, ams_pmu_req_complete, 3, ams_pmu_cmd, 0x01, reg))
+		return 0;
+
+	wait_for_completion(&req_complete);
+
+	if (req.reply_len > 0)
+		return req.reply[0];
+	else
+		return 0;
+}
+
+/* Enables or disables the specified interrupts */
+static void ams_pmu_set_irq(enum ams_irq reg, char enable)
+{
+	if (reg & AMS_IRQ_FREEFALL) {
+		u8 val = ams_pmu_get_register(AMS_FF_ENABLE);
+		if (enable)
+			val |= 0x80;
+		else
+			val &= ~0x80;
+		ams_pmu_set_register(AMS_FF_ENABLE, val);
+	}
+
+	if (reg & AMS_IRQ_SHOCK) {
+		u8 val = ams_pmu_get_register(AMS_SHOCK_ENABLE);
+		if (enable)
+			val |= 0x80;
+		else
+			val &= ~0x80;
+		ams_pmu_set_register(AMS_SHOCK_ENABLE, val);
+	}
+
+	if (reg & AMS_IRQ_GLOBAL) {
+		u8 val = ams_pmu_get_register(AMS_CONTROL);
+		if (enable)
+			val |= 0x80;
+		else
+			val &= ~0x80;
+		ams_pmu_set_register(AMS_CONTROL, val);
+	}
+}
+
+static void ams_pmu_clear_irq(enum ams_irq reg)
+{
+	if (reg & AMS_IRQ_FREEFALL)
+		ams_pmu_set_register(AMS_FF_CLEAR, 0x00);
+
+	if (reg & AMS_IRQ_SHOCK)
+		ams_pmu_set_register(AMS_SHOCK_CLEAR, 0x00);
+}
+
+static u8 ams_pmu_get_vendor(void)
+{
+	return ams_pmu_get_register(AMS_VENDOR);
+}
+
+static void ams_pmu_get_xyz(s8 *x, s8 *y, s8 *z)
+{
+	*x = ams_pmu_get_register(AMS_X);
+	*y = ams_pmu_get_register(AMS_Y);
+	*z = ams_pmu_get_register(AMS_Z);
+}
+
+static void ams_pmu_exit(void)
+{
+	/* Disable interrupts */
+	ams_pmu_set_irq(AMS_IRQ_ALL, 0);
+
+	/* Clear interrupts */
+	ams_pmu_clear_irq(AMS_IRQ_ALL);
+
+	ams_info.has_device = 0;
+
+	printk(KERN_INFO "ams: Unloading\n");
+}
+
+int __init ams_pmu_init(struct device_node *np)
+{
+	u32 *prop;
+	int result;
+
+	mutex_lock(&ams_info.lock);
+
+	/* Set implementation stuff */
+	ams_info.of_node = np;
+	ams_info.exit = ams_pmu_exit;
+	ams_info.get_vendor = ams_pmu_get_vendor;
+	ams_info.get_xyz = ams_pmu_get_xyz;
+	ams_info.clear_irq = ams_pmu_clear_irq;
+	ams_info.bustype = BUS_HOST;
+
+	/* Get PMU command, should be 0x4e, but we can never know */
+	prop = (u32*)get_property(ams_info.of_node, "reg", NULL);
+	if (!prop) {
+		result = -ENODEV;
+		goto exit;
+	}
+	ams_pmu_cmd = ((*prop) >> 8) & 0xff;
+
+	/* Disable interrupts */
+	ams_pmu_set_irq(AMS_IRQ_ALL, 0);
+
+	/* Clear interrupts */
+	ams_pmu_clear_irq(AMS_IRQ_ALL);
+
+	result = ams_sensor_attach();
+	if (result < 0)
+		goto exit;
+
+	/* Set default values */
+	ams_pmu_set_register(AMS_FF_LOW_LIMIT, 0x15);
+	ams_pmu_set_register(AMS_FF_ENABLE, 0x08);
+	ams_pmu_set_register(AMS_FF_DEBOUNCE, 0x14);
+
+	ams_pmu_set_register(AMS_SHOCK_HIGH_LIMIT, 0x60);
+	ams_pmu_set_register(AMS_SHOCK_ENABLE, 0x0f);
+	ams_pmu_set_register(AMS_SHOCK_DEBOUNCE, 0x14);
+
+	ams_pmu_set_register(AMS_CONTROL, 0x4f);
+
+	/* Clear interrupts */
+	ams_pmu_clear_irq(AMS_IRQ_ALL);
+
+	ams_info.has_device = 1;
+
+	/* Enable interrupts */
+	ams_pmu_set_irq(AMS_IRQ_ALL, 1);
+
+	printk(KERN_INFO "ams: Found PMU based motion sensor\n");
+
+	result = 0;
+
+exit:
+	mutex_unlock(&ams_info.lock);
+
+	return result;
+}
diff --git a/drivers/hwmon/ams/ams.h b/drivers/hwmon/ams/ams.h
new file mode 100644
index 000000000000..240730e6bcde
--- /dev/null
+++ b/drivers/hwmon/ams/ams.h
@@ -0,0 +1,72 @@
+#include <linux/i2c.h>
+#include <linux/input.h>
+#include <linux/kthread.h>
+#include <linux/mutex.h>
+#include <linux/spinlock.h>
+#include <linux/types.h>
+#include <asm/of_device.h>
+
+enum ams_irq {
+	AMS_IRQ_FREEFALL = 0x01,
+	AMS_IRQ_SHOCK = 0x02,
+	AMS_IRQ_GLOBAL = 0x04,
+	AMS_IRQ_ALL =
+		AMS_IRQ_FREEFALL |
+		AMS_IRQ_SHOCK |
+		AMS_IRQ_GLOBAL,
+};
+
+struct ams {
+	/* Locks */
+	spinlock_t irq_lock;
+	struct mutex lock;
+
+	/* General properties */
+	struct device_node *of_node;
+	struct of_device *of_dev;
+	char has_device;
+	char vflag;
+	u32 orient1;
+	u32 orient2;
+
+	/* Interrupt worker */
+	struct work_struct worker;
+	u8 worker_irqs;
+
+	/* Implementation
+	 *
+	 * Only call these functions with the main lock held.
+	 */
+	void (*exit)(void);
+
+	void (*get_xyz)(s8 *x, s8 *y, s8 *z);
+	u8 (*get_vendor)(void);
+
+	void (*clear_irq)(enum ams_irq reg);
+
+#ifdef CONFIG_SENSORS_AMS_I2C
+	/* I2C properties */
+	int i2c_bus;
+	int i2c_address;
+	struct i2c_client i2c_client;
+#endif
+
+	/* Joystick emulation */
+	struct task_struct *kthread;
+	struct input_dev *idev;
+	__u16 bustype;
+
+	/* calibrated null values */
+	int xcalib, ycalib, zcalib;
+};
+
+extern struct ams ams_info;
+
+extern void ams_sensors(s8 *x, s8 *y, s8 *z);
+extern int ams_sensor_attach(void);
+
+extern int ams_pmu_init(struct device_node *np);
+extern int ams_i2c_init(struct device_node *np);
+
+extern int ams_input_init(void);
+extern void ams_input_exit(void);
diff --git a/drivers/hwmon/f71805f.c b/drivers/hwmon/f71805f.c
index de17a72149d9..a272cae8f60e 100644
--- a/drivers/hwmon/f71805f.c
+++ b/drivers/hwmon/f71805f.c
@@ -1,12 +1,15 @@
 /*
- * f71805f.c - driver for the Fintek F71805F/FG Super-I/O chip integrated
- *             hardware monitoring features
+ * f71805f.c - driver for the Fintek F71805F/FG and F71872F/FG Super-I/O
+ *             chips integrated hardware monitoring features
  * Copyright (C) 2005-2006  Jean Delvare <khali@linux-fr.org>
  *
  * The F71805F/FG is a LPC Super-I/O chip made by Fintek. It integrates
  * complete hardware monitoring features: voltage, fan and temperature
  * sensors, and manual and automatic fan speed control.
  *
+ * The F71872F/FG is almost the same, with two more voltages monitored,
+ * and 6 VID inputs.
+ *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation; either version 2 of the License, or
@@ -37,6 +40,7 @@
 static struct platform_device *pdev;
 
 #define DRVNAME "f71805f"
+enum kinds { f71805f, f71872f };
 
 /*
  * Super-I/O constants and functions
@@ -48,11 +52,13 @@ static struct platform_device *pdev;
 #define SIO_REG_DEVID		0x20	/* Device ID (2 bytes) */
 #define SIO_REG_DEVREV		0x22	/* Device revision */
 #define SIO_REG_MANID		0x23	/* Fintek ID (2 bytes) */
+#define SIO_REG_FNSEL1		0x29	/* Multi Function Select 1 (F71872F) */
 #define SIO_REG_ENABLE		0x30	/* Logical device enable */
 #define SIO_REG_ADDR		0x60	/* Logical device address (2 bytes) */
 
 #define SIO_FINTEK_ID		0x1934
 #define SIO_F71805F_ID		0x0406
+#define SIO_F71872F_ID		0x0341
 
 static inline int
 superio_inb(int base, int reg)
@@ -96,22 +102,25 @@ superio_exit(int base)
  * ISA constants
  */
 
-#define REGION_LENGTH		2
-#define ADDR_REG_OFFSET		0
-#define DATA_REG_OFFSET		1
+#define REGION_LENGTH		8
+#define ADDR_REG_OFFSET		5
+#define DATA_REG_OFFSET		6
 
 /*
  * Registers
  */
 
-/* in nr from 0 to 8 (8-bit values) */
+/* in nr from 0 to 10 (8-bit values) */
 #define F71805F_REG_IN(nr)		(0x10 + (nr))
-#define F71805F_REG_IN_HIGH(nr)		(0x40 + 2 * (nr))
-#define F71805F_REG_IN_LOW(nr)		(0x41 + 2 * (nr))
+#define F71805F_REG_IN_HIGH(nr)		((nr) < 10 ? 0x40 + 2 * (nr) : 0x2E)
+#define F71805F_REG_IN_LOW(nr)		((nr) < 10 ? 0x41 + 2 * (nr) : 0x2F)
 /* fan nr from 0 to 2 (12-bit values, two registers) */
 #define F71805F_REG_FAN(nr)		(0x20 + 2 * (nr))
 #define F71805F_REG_FAN_LOW(nr)		(0x28 + 2 * (nr))
+#define F71805F_REG_FAN_TARGET(nr)	(0x69 + 16 * (nr))
 #define F71805F_REG_FAN_CTRL(nr)	(0x60 + 16 * (nr))
+#define F71805F_REG_PWM_FREQ(nr)	(0x63 + 16 * (nr))
+#define F71805F_REG_PWM_DUTY(nr)	(0x6B + 16 * (nr))
 /* temp nr from 0 to 2 (8-bit values) */
 #define F71805F_REG_TEMP(nr)		(0x1B + (nr))
 #define F71805F_REG_TEMP_HIGH(nr)	(0x54 + 2 * (nr))
@@ -122,6 +131,14 @@ superio_exit(int base)
 /* status nr from 0 to 2 */
 #define F71805F_REG_STATUS(nr)		(0x36 + (nr))
 
+/* individual register bits */
+#define FAN_CTRL_DC_MODE		0x10
+#define FAN_CTRL_LATCH_FULL		0x08
+#define FAN_CTRL_MODE_MASK		0x03
+#define FAN_CTRL_MODE_SPEED		0x00
+#define FAN_CTRL_MODE_TEMPERATURE	0x01
+#define FAN_CTRL_MODE_MANUAL		0x02
+
 /*
  * Data structures and manipulation thereof
  */
@@ -138,12 +155,16 @@ struct f71805f_data {
 	unsigned long last_limits;	/* In jiffies */
 
 	/* Register values */
-	u8 in[9];
-	u8 in_high[9];
-	u8 in_low[9];
+	u8 in[11];
+	u8 in_high[11];
+	u8 in_low[11];
+	u16 has_in;
 	u16 fan[3];
 	u16 fan_low[3];
-	u8 fan_enabled;		/* Read once at init time */
+	u16 fan_target[3];
+	u8 fan_ctrl[3];
+	u8 pwm[3];
+	u8 pwm_freq[3];
 	u8 temp[3];
 	u8 temp_high[3];
 	u8 temp_hyst[3];
@@ -151,6 +172,11 @@ struct f71805f_data {
 	unsigned long alarms;
 };
 
+struct f71805f_sio_data {
+	enum kinds kind;
+	u8 fnsel1;
+};
+
 static inline long in_from_reg(u8 reg)
 {
 	return (reg * 8);
@@ -200,6 +226,33 @@ static inline u16 fan_to_reg(long rpm)
 	return (1500000 / rpm);
 }
 
+static inline unsigned long pwm_freq_from_reg(u8 reg)
+{
+	unsigned long clock = (reg & 0x80) ? 48000000UL : 1000000UL;
+
+	reg &= 0x7f;
+	if (reg == 0)
+		reg++;
+	return clock / (reg << 8);
+}
+
+static inline u8 pwm_freq_to_reg(unsigned long val)
+{
+	if (val >= 187500)	/* The highest we can do */
+		return 0x80;
+	if (val >= 1475)	/* Use 48 MHz clock */
+		return 0x80 | (48000000UL / (val << 8));
+	if (val < 31)		/* The lowest we can do */
+		return 0x7f;
+	else			/* Use 1 MHz clock */
+		return 1000000UL / (val << 8);
+}
+
+static inline int pwm_mode_from_reg(u8 reg)
+{
+	return !(reg & FAN_CTRL_DC_MODE);
+}
+
 static inline long temp_from_reg(u8 reg)
 {
 	return (reg * 1000);
@@ -274,16 +327,21 @@ static struct f71805f_data *f71805f_update_device(struct device *dev)
 	/* Limit registers cache is refreshed after 60 seconds */
 	if (time_after(jiffies, data->last_updated + 60 * HZ)
 	 || !data->valid) {
-		for (nr = 0; nr < 9; nr++) {
+		for (nr = 0; nr < 11; nr++) {
+			if (!(data->has_in & (1 << nr)))
+				continue;
 			data->in_high[nr] = f71805f_read8(data,
 					    F71805F_REG_IN_HIGH(nr));
 			data->in_low[nr] = f71805f_read8(data,
 					   F71805F_REG_IN_LOW(nr));
 		}
 		for (nr = 0; nr < 3; nr++) {
-			if (data->fan_enabled & (1 << nr))
-				data->fan_low[nr] = f71805f_read16(data,
-						    F71805F_REG_FAN_LOW(nr));
+			data->fan_low[nr] = f71805f_read16(data,
+					    F71805F_REG_FAN_LOW(nr));
+			data->fan_target[nr] = f71805f_read16(data,
+					       F71805F_REG_FAN_TARGET(nr));
+			data->pwm_freq[nr] = f71805f_read8(data,
+					     F71805F_REG_PWM_FREQ(nr));
 		}
 		for (nr = 0; nr < 3; nr++) {
 			data->temp_high[nr] = f71805f_read8(data,
@@ -299,14 +357,19 @@ static struct f71805f_data *f71805f_update_device(struct device *dev)
 	/* Measurement registers cache is refreshed after 1 second */
 	if (time_after(jiffies, data->last_updated + HZ)
 	 || !data->valid) {
-		for (nr = 0; nr < 9; nr++) {
+		for (nr = 0; nr < 11; nr++) {
+			if (!(data->has_in & (1 << nr)))
+				continue;
 			data->in[nr] = f71805f_read8(data,
 				       F71805F_REG_IN(nr));
 		}
 		for (nr = 0; nr < 3; nr++) {
-			if (data->fan_enabled & (1 << nr))
-				data->fan[nr] = f71805f_read16(data,
-						F71805F_REG_FAN(nr));
+			data->fan[nr] = f71805f_read16(data,
+					F71805F_REG_FAN(nr));
+			data->fan_ctrl[nr] = f71805f_read8(data,
+					     F71805F_REG_FAN_CTRL(nr));
+			data->pwm[nr] = f71805f_read8(data,
+					F71805F_REG_PWM_DUTY(nr));
 		}
 		for (nr = 0; nr < 3; nr++) {
 			data->temp[nr] = f71805f_read8(data,
@@ -333,35 +396,43 @@ static ssize_t show_in0(struct device *dev, struct device_attribute *devattr,
 			char *buf)
 {
 	struct f71805f_data *data = f71805f_update_device(dev);
+	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+	int nr = attr->index;
 
-	return sprintf(buf, "%ld\n", in0_from_reg(data->in[0]));
+	return sprintf(buf, "%ld\n", in0_from_reg(data->in[nr]));
 }
 
 static ssize_t show_in0_max(struct device *dev, struct device_attribute
 			    *devattr, char *buf)
 {
 	struct f71805f_data *data = f71805f_update_device(dev);
+	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+	int nr = attr->index;
 
-	return sprintf(buf, "%ld\n", in0_from_reg(data->in_high[0]));
+	return sprintf(buf, "%ld\n", in0_from_reg(data->in_high[nr]));
 }
 
 static ssize_t show_in0_min(struct device *dev, struct device_attribute
 			    *devattr, char *buf)
 {
 	struct f71805f_data *data = f71805f_update_device(dev);
+	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+	int nr = attr->index;
 
-	return sprintf(buf, "%ld\n", in0_from_reg(data->in_low[0]));
+	return sprintf(buf, "%ld\n", in0_from_reg(data->in_low[nr]));
 }
 
 static ssize_t set_in0_max(struct device *dev, struct device_attribute
 			   *devattr, const char *buf, size_t count)
 {
 	struct f71805f_data *data = dev_get_drvdata(dev);
+	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+	int nr = attr->index;
 	long val = simple_strtol(buf, NULL, 10);
 
 	mutex_lock(&data->update_lock);
-	data->in_high[0] = in0_to_reg(val);
-	f71805f_write8(data, F71805F_REG_IN_HIGH(0), data->in_high[0]);
+	data->in_high[nr] = in0_to_reg(val);
+	f71805f_write8(data, F71805F_REG_IN_HIGH(nr), data->in_high[nr]);
 	mutex_unlock(&data->update_lock);
 
 	return count;
@@ -371,11 +442,13 @@ static ssize_t set_in0_min(struct device *dev, struct device_attribute
 			   *devattr, const char *buf, size_t count)
 {
 	struct f71805f_data *data = dev_get_drvdata(dev);
+	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+	int nr = attr->index;
 	long val = simple_strtol(buf, NULL, 10);
 
 	mutex_lock(&data->update_lock);
-	data->in_low[0] = in0_to_reg(val);
-	f71805f_write8(data, F71805F_REG_IN_LOW(0), data->in_low[0]);
+	data->in_low[nr] = in0_to_reg(val);
+	f71805f_write8(data, F71805F_REG_IN_LOW(nr), data->in_low[nr]);
 	mutex_unlock(&data->update_lock);
 
 	return count;
@@ -463,6 +536,16 @@ static ssize_t show_fan_min(struct device *dev, struct device_attribute
 	return sprintf(buf, "%ld\n", fan_from_reg(data->fan_low[nr]));
 }
 
+static ssize_t show_fan_target(struct device *dev, struct device_attribute
+			       *devattr, char *buf)
+{
+	struct f71805f_data *data = f71805f_update_device(dev);
+	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+	int nr = attr->index;
+
+	return sprintf(buf, "%ld\n", fan_from_reg(data->fan_target[nr]));
+}
+
 static ssize_t set_fan_min(struct device *dev, struct device_attribute
 			   *devattr, const char *buf, size_t count)
 {
@@ -479,6 +562,157 @@ static ssize_t set_fan_min(struct device *dev, struct device_attribute
 	return count;
 }
 
+static ssize_t set_fan_target(struct device *dev, struct device_attribute
+			      *devattr, const char *buf, size_t count)
+{
+	struct f71805f_data *data = dev_get_drvdata(dev);
+	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+	int nr = attr->index;
+	long val = simple_strtol(buf, NULL, 10);
+
+	mutex_lock(&data->update_lock);
+	data->fan_target[nr] = fan_to_reg(val);
+	f71805f_write16(data, F71805F_REG_FAN_TARGET(nr),
+			data->fan_target[nr]);
+	mutex_unlock(&data->update_lock);
+
+	return count;
+}
+
+static ssize_t show_pwm(struct device *dev, struct device_attribute *devattr,
+			char *buf)
+{
+	struct f71805f_data *data = f71805f_update_device(dev);
+	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+	int nr = attr->index;
+
+	return sprintf(buf, "%d\n", (int)data->pwm[nr]);
+}
+
+static ssize_t show_pwm_enable(struct device *dev, struct device_attribute
+			       *devattr, char *buf)
+{
+	struct f71805f_data *data = f71805f_update_device(dev);
+	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+	int nr = attr->index;
+	int mode;
+
+	switch (data->fan_ctrl[nr] & FAN_CTRL_MODE_MASK) {
+	case FAN_CTRL_MODE_SPEED:
+		mode = 3;
+		break;
+	case FAN_CTRL_MODE_TEMPERATURE:
+		mode = 2;
+		break;
+	default: /* MANUAL */
+		mode = 1;
+	}
+
+	return sprintf(buf, "%d\n", mode);
+}
+
+static ssize_t show_pwm_freq(struct device *dev, struct device_attribute
+			     *devattr, char *buf)
+{
+	struct f71805f_data *data = f71805f_update_device(dev);
+	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+	int nr = attr->index;
+
+	return sprintf(buf, "%lu\n", pwm_freq_from_reg(data->pwm_freq[nr]));
+}
+
+static ssize_t show_pwm_mode(struct device *dev, struct device_attribute
+			     *devattr, char *buf)
+{
+	struct f71805f_data *data = f71805f_update_device(dev);
+	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+	int nr = attr->index;
+
+	return sprintf(buf, "%d\n", pwm_mode_from_reg(data->fan_ctrl[nr]));
+}
+
+static ssize_t set_pwm(struct device *dev, struct device_attribute *devattr,
+		       const char *buf, size_t count)
+{
+	struct f71805f_data *data = dev_get_drvdata(dev);
+	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+	int nr = attr->index;
+	unsigned long val = simple_strtoul(buf, NULL, 10);
+
+	if (val > 255)
+		return -EINVAL;
+
+	mutex_lock(&data->update_lock);
+	data->pwm[nr] = val;
+	f71805f_write8(data, F71805F_REG_PWM_DUTY(nr), data->pwm[nr]);
+	mutex_unlock(&data->update_lock);
+
+	return count;
+}
+
+static struct attribute *f71805f_attr_pwm[];
+
+static ssize_t set_pwm_enable(struct device *dev, struct device_attribute
+			      *devattr, const char *buf, size_t count)
+{
+	struct f71805f_data *data = dev_get_drvdata(dev);
+	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+	int nr = attr->index;
+	unsigned long val = simple_strtoul(buf, NULL, 10);
+	u8 reg;
+
+	if (val < 1 || val > 3)
+		return -EINVAL;
+
+	if (val > 1) { /* Automatic mode, user can't set PWM value */
+		if (sysfs_chmod_file(&dev->kobj, f71805f_attr_pwm[nr],
+				     S_IRUGO))
+			dev_dbg(dev, "chmod -w pwm%d failed\n", nr + 1);
+	}
+
+	mutex_lock(&data->update_lock);
+	reg = f71805f_read8(data, F71805F_REG_FAN_CTRL(nr))
+	    & ~FAN_CTRL_MODE_MASK;
+	switch (val) {
+	case 1:
+		reg |= FAN_CTRL_MODE_MANUAL;
+		break;
+	case 2:
+		reg |= FAN_CTRL_MODE_TEMPERATURE;
+		break;
+	case 3:
+		reg |= FAN_CTRL_MODE_SPEED;
+		break;
+	}
+	data->fan_ctrl[nr] = reg;
+	f71805f_write8(data, F71805F_REG_FAN_CTRL(nr), reg);
+	mutex_unlock(&data->update_lock);
+
+	if (val == 1) { /* Manual mode, user can set PWM value */
+		if (sysfs_chmod_file(&dev->kobj, f71805f_attr_pwm[nr],
+				     S_IRUGO | S_IWUSR))
+			dev_dbg(dev, "chmod +w pwm%d failed\n", nr + 1);
+	}
+
+	return count;
+}
+
+static ssize_t set_pwm_freq(struct device *dev, struct device_attribute
+			    *devattr, const char *buf, size_t count)
+{
+	struct f71805f_data *data = dev_get_drvdata(dev);
+	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+	int nr = attr->index;
+	unsigned long val = simple_strtoul(buf, NULL, 10);
+
+	mutex_lock(&data->update_lock);
+	data->pwm_freq[nr] = pwm_freq_to_reg(val);
+	f71805f_write8(data, F71805F_REG_PWM_FREQ(nr), data->pwm_freq[nr]);
+	mutex_unlock(&data->update_lock);
+
+	return count;
+}
+
 static ssize_t show_temp(struct device *dev, struct device_attribute *devattr,
 			 char *buf)
 {
@@ -557,7 +791,7 @@ static ssize_t show_alarms_in(struct device *dev, struct device_attribute
 {
 	struct f71805f_data *data = f71805f_update_device(dev);
 
-	return sprintf(buf, "%lu\n", data->alarms & 0x1ff);
+	return sprintf(buf, "%lu\n", data->alarms & 0x7ff);
 }
 
 static ssize_t show_alarms_fan(struct device *dev, struct device_attribute
@@ -594,9 +828,11 @@ static ssize_t show_name(struct device *dev, struct device_attribute
 	return sprintf(buf, "%s\n", data->name);
 }
 
-static DEVICE_ATTR(in0_input, S_IRUGO, show_in0, NULL);
-static DEVICE_ATTR(in0_max, S_IRUGO| S_IWUSR, show_in0_max, set_in0_max);
-static DEVICE_ATTR(in0_min, S_IRUGO| S_IWUSR, show_in0_min, set_in0_min);
+static SENSOR_DEVICE_ATTR(in0_input, S_IRUGO, show_in0, NULL, 0);
+static SENSOR_DEVICE_ATTR(in0_max, S_IRUGO| S_IWUSR,
+			  show_in0_max, set_in0_max, 0);
+static SENSOR_DEVICE_ATTR(in0_min, S_IRUGO| S_IWUSR,
+			  show_in0_min, set_in0_min, 0);
 static SENSOR_DEVICE_ATTR(in1_input, S_IRUGO, show_in, NULL, 1);
 static SENSOR_DEVICE_ATTR(in1_max, S_IRUGO | S_IWUSR,
 			  show_in_max, set_in_max, 1);
@@ -637,16 +873,32 @@ static SENSOR_DEVICE_ATTR(in8_max, S_IRUGO | S_IWUSR,
 			  show_in_max, set_in_max, 8);
 static SENSOR_DEVICE_ATTR(in8_min, S_IRUGO | S_IWUSR,
 			  show_in_min, set_in_min, 8);
+static SENSOR_DEVICE_ATTR(in9_input, S_IRUGO, show_in0, NULL, 9);
+static SENSOR_DEVICE_ATTR(in9_max, S_IRUGO | S_IWUSR,
+			  show_in0_max, set_in0_max, 9);
+static SENSOR_DEVICE_ATTR(in9_min, S_IRUGO | S_IWUSR,
+			  show_in0_min, set_in0_min, 9);
+static SENSOR_DEVICE_ATTR(in10_input, S_IRUGO, show_in0, NULL, 10);
+static SENSOR_DEVICE_ATTR(in10_max, S_IRUGO | S_IWUSR,
+			  show_in0_max, set_in0_max, 10);
+static SENSOR_DEVICE_ATTR(in10_min, S_IRUGO | S_IWUSR,
+			  show_in0_min, set_in0_min, 10);
 
 static SENSOR_DEVICE_ATTR(fan1_input, S_IRUGO, show_fan, NULL, 0);
 static SENSOR_DEVICE_ATTR(fan1_min, S_IRUGO | S_IWUSR,
 			  show_fan_min, set_fan_min, 0);
+static SENSOR_DEVICE_ATTR(fan1_target, S_IRUGO | S_IWUSR,
+			  show_fan_target, set_fan_target, 0);
 static SENSOR_DEVICE_ATTR(fan2_input, S_IRUGO, show_fan, NULL, 1);
 static SENSOR_DEVICE_ATTR(fan2_min, S_IRUGO | S_IWUSR,
 			  show_fan_min, set_fan_min, 1);
+static SENSOR_DEVICE_ATTR(fan2_target, S_IRUGO | S_IWUSR,
+			  show_fan_target, set_fan_target, 1);
 static SENSOR_DEVICE_ATTR(fan3_input, S_IRUGO, show_fan, NULL, 2);
 static SENSOR_DEVICE_ATTR(fan3_min, S_IRUGO | S_IWUSR,
 			  show_fan_min, set_fan_min, 2);
+static SENSOR_DEVICE_ATTR(fan3_target, S_IRUGO | S_IWUSR,
+			  show_fan_target, set_fan_target, 2);
 
 static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, show_temp, NULL, 0);
 static SENSOR_DEVICE_ATTR(temp1_max, S_IRUGO | S_IWUSR,
@@ -667,6 +919,27 @@ static SENSOR_DEVICE_ATTR(temp3_max_hyst, S_IRUGO | S_IWUSR,
 		    show_temp_hyst, set_temp_hyst, 2);
 static SENSOR_DEVICE_ATTR(temp3_type, S_IRUGO, show_temp_type, NULL, 2);
 
+/* pwm (value) files are created read-only, write permission is
+   then added or removed dynamically as needed */
+static SENSOR_DEVICE_ATTR(pwm1, S_IRUGO, show_pwm, set_pwm, 0);
+static SENSOR_DEVICE_ATTR(pwm1_enable, S_IRUGO | S_IWUSR,
+			  show_pwm_enable, set_pwm_enable, 0);
+static SENSOR_DEVICE_ATTR(pwm1_freq, S_IRUGO | S_IWUSR,
+			  show_pwm_freq, set_pwm_freq, 0);
+static SENSOR_DEVICE_ATTR(pwm1_mode, S_IRUGO, show_pwm_mode, NULL, 0);
+static SENSOR_DEVICE_ATTR(pwm2, S_IRUGO, show_pwm, set_pwm, 1);
+static SENSOR_DEVICE_ATTR(pwm2_enable, S_IRUGO | S_IWUSR,
+			  show_pwm_enable, set_pwm_enable, 1);
+static SENSOR_DEVICE_ATTR(pwm2_freq, S_IRUGO | S_IWUSR,
+			  show_pwm_freq, set_pwm_freq, 1);
+static SENSOR_DEVICE_ATTR(pwm2_mode, S_IRUGO, show_pwm_mode, NULL, 1);
+static SENSOR_DEVICE_ATTR(pwm3, S_IRUGO, show_pwm, set_pwm, 2);
+static SENSOR_DEVICE_ATTR(pwm3_enable, S_IRUGO | S_IWUSR,
+			  show_pwm_enable, set_pwm_enable, 2);
+static SENSOR_DEVICE_ATTR(pwm3_freq, S_IRUGO | S_IWUSR,
+			  show_pwm_freq, set_pwm_freq, 2);
+static SENSOR_DEVICE_ATTR(pwm3_mode, S_IRUGO, show_pwm_mode, NULL, 2);
+
 static SENSOR_DEVICE_ATTR(in0_alarm, S_IRUGO, show_alarm, NULL, 0);
 static SENSOR_DEVICE_ATTR(in1_alarm, S_IRUGO, show_alarm, NULL, 1);
 static SENSOR_DEVICE_ATTR(in2_alarm, S_IRUGO, show_alarm, NULL, 2);
@@ -676,6 +949,8 @@ static SENSOR_DEVICE_ATTR(in5_alarm, S_IRUGO, show_alarm, NULL, 5);
 static SENSOR_DEVICE_ATTR(in6_alarm, S_IRUGO, show_alarm, NULL, 6);
 static SENSOR_DEVICE_ATTR(in7_alarm, S_IRUGO, show_alarm, NULL, 7);
 static SENSOR_DEVICE_ATTR(in8_alarm, S_IRUGO, show_alarm, NULL, 8);
+static SENSOR_DEVICE_ATTR(in9_alarm, S_IRUGO, show_alarm, NULL, 9);
+static SENSOR_DEVICE_ATTR(in10_alarm, S_IRUGO, show_alarm, NULL, 10);
 static SENSOR_DEVICE_ATTR(temp1_alarm, S_IRUGO, show_alarm, NULL, 11);
 static SENSOR_DEVICE_ATTR(temp2_alarm, S_IRUGO, show_alarm, NULL, 12);
 static SENSOR_DEVICE_ATTR(temp3_alarm, S_IRUGO, show_alarm, NULL, 13);
@@ -689,9 +964,9 @@ static DEVICE_ATTR(alarms_temp, S_IRUGO, show_alarms_temp, NULL);
 static DEVICE_ATTR(name, S_IRUGO, show_name, NULL);
 
 static struct attribute *f71805f_attributes[] = {
-	&dev_attr_in0_input.attr,
-	&dev_attr_in0_max.attr,
-	&dev_attr_in0_min.attr,
+	&sensor_dev_attr_in0_input.dev_attr.attr,
+	&sensor_dev_attr_in0_max.dev_attr.attr,
+	&sensor_dev_attr_in0_min.dev_attr.attr,
 	&sensor_dev_attr_in1_input.dev_attr.attr,
 	&sensor_dev_attr_in1_max.dev_attr.attr,
 	&sensor_dev_attr_in1_min.dev_attr.attr,
@@ -701,9 +976,6 @@ static struct attribute *f71805f_attributes[] = {
 	&sensor_dev_attr_in3_input.dev_attr.attr,
 	&sensor_dev_attr_in3_max.dev_attr.attr,
 	&sensor_dev_attr_in3_min.dev_attr.attr,
-	&sensor_dev_attr_in4_input.dev_attr.attr,
-	&sensor_dev_attr_in4_max.dev_attr.attr,
-	&sensor_dev_attr_in4_min.dev_attr.attr,
 	&sensor_dev_attr_in5_input.dev_attr.attr,
 	&sensor_dev_attr_in5_max.dev_attr.attr,
 	&sensor_dev_attr_in5_min.dev_attr.attr,
@@ -713,9 +985,29 @@ static struct attribute *f71805f_attributes[] = {
 	&sensor_dev_attr_in7_input.dev_attr.attr,
 	&sensor_dev_attr_in7_max.dev_attr.attr,
 	&sensor_dev_attr_in7_min.dev_attr.attr,
-	&sensor_dev_attr_in8_input.dev_attr.attr,
-	&sensor_dev_attr_in8_max.dev_attr.attr,
-	&sensor_dev_attr_in8_min.dev_attr.attr,
+
+	&sensor_dev_attr_fan1_input.dev_attr.attr,
+	&sensor_dev_attr_fan1_min.dev_attr.attr,
+	&sensor_dev_attr_fan1_alarm.dev_attr.attr,
+	&sensor_dev_attr_fan1_target.dev_attr.attr,
+	&sensor_dev_attr_fan2_input.dev_attr.attr,
+	&sensor_dev_attr_fan2_min.dev_attr.attr,
+	&sensor_dev_attr_fan2_alarm.dev_attr.attr,
+	&sensor_dev_attr_fan2_target.dev_attr.attr,
+	&sensor_dev_attr_fan3_input.dev_attr.attr,
+	&sensor_dev_attr_fan3_min.dev_attr.attr,
+	&sensor_dev_attr_fan3_alarm.dev_attr.attr,
+	&sensor_dev_attr_fan3_target.dev_attr.attr,
+
+	&sensor_dev_attr_pwm1.dev_attr.attr,
+	&sensor_dev_attr_pwm1_enable.dev_attr.attr,
+	&sensor_dev_attr_pwm1_mode.dev_attr.attr,
+	&sensor_dev_attr_pwm2.dev_attr.attr,
+	&sensor_dev_attr_pwm2_enable.dev_attr.attr,
+	&sensor_dev_attr_pwm2_mode.dev_attr.attr,
+	&sensor_dev_attr_pwm3.dev_attr.attr,
+	&sensor_dev_attr_pwm3_enable.dev_attr.attr,
+	&sensor_dev_attr_pwm3_mode.dev_attr.attr,
 
 	&sensor_dev_attr_temp1_input.dev_attr.attr,
 	&sensor_dev_attr_temp1_max.dev_attr.attr,
@@ -734,11 +1026,9 @@ static struct attribute *f71805f_attributes[] = {
 	&sensor_dev_attr_in1_alarm.dev_attr.attr,
 	&sensor_dev_attr_in2_alarm.dev_attr.attr,
 	&sensor_dev_attr_in3_alarm.dev_attr.attr,
-	&sensor_dev_attr_in4_alarm.dev_attr.attr,
 	&sensor_dev_attr_in5_alarm.dev_attr.attr,
 	&sensor_dev_attr_in6_alarm.dev_attr.attr,
 	&sensor_dev_attr_in7_alarm.dev_attr.attr,
-	&sensor_dev_attr_in8_alarm.dev_attr.attr,
 	&dev_attr_alarms_in.attr,
 	&sensor_dev_attr_temp1_alarm.dev_attr.attr,
 	&sensor_dev_attr_temp2_alarm.dev_attr.attr,
@@ -754,29 +1044,59 @@ static const struct attribute_group f71805f_group = {
 	.attrs = f71805f_attributes,
 };
 
-static struct attribute *f71805f_attributes_fan[3][4] = {
+static struct attribute *f71805f_attributes_optin[4][5] = {
 	{
-		&sensor_dev_attr_fan1_input.dev_attr.attr,
-		&sensor_dev_attr_fan1_min.dev_attr.attr,
-		&sensor_dev_attr_fan1_alarm.dev_attr.attr,
+		&sensor_dev_attr_in4_input.dev_attr.attr,
+		&sensor_dev_attr_in4_max.dev_attr.attr,
+		&sensor_dev_attr_in4_min.dev_attr.attr,
+		&sensor_dev_attr_in4_alarm.dev_attr.attr,
+		NULL
+	}, {
+		&sensor_dev_attr_in8_input.dev_attr.attr,
+		&sensor_dev_attr_in8_max.dev_attr.attr,
+		&sensor_dev_attr_in8_min.dev_attr.attr,
+		&sensor_dev_attr_in8_alarm.dev_attr.attr,
 		NULL
 	}, {
-		&sensor_dev_attr_fan2_input.dev_attr.attr,
-		&sensor_dev_attr_fan2_min.dev_attr.attr,
-		&sensor_dev_attr_fan2_alarm.dev_attr.attr,
+		&sensor_dev_attr_in9_input.dev_attr.attr,
+		&sensor_dev_attr_in9_max.dev_attr.attr,
+		&sensor_dev_attr_in9_min.dev_attr.attr,
+		&sensor_dev_attr_in9_alarm.dev_attr.attr,
 		NULL
 	}, {
-		&sensor_dev_attr_fan3_input.dev_attr.attr,
-		&sensor_dev_attr_fan3_min.dev_attr.attr,
-		&sensor_dev_attr_fan3_alarm.dev_attr.attr,
+		&sensor_dev_attr_in10_input.dev_attr.attr,
+		&sensor_dev_attr_in10_max.dev_attr.attr,
+		&sensor_dev_attr_in10_min.dev_attr.attr,
+		&sensor_dev_attr_in10_alarm.dev_attr.attr,
 		NULL
 	}
 };
 
-static const struct attribute_group f71805f_group_fan[3] = {
-	{ .attrs = f71805f_attributes_fan[0] },
-	{ .attrs = f71805f_attributes_fan[1] },
-	{ .attrs = f71805f_attributes_fan[2] },
+static const struct attribute_group f71805f_group_optin[4] = {
+	{ .attrs = f71805f_attributes_optin[0] },
+	{ .attrs = f71805f_attributes_optin[1] },
+	{ .attrs = f71805f_attributes_optin[2] },
+	{ .attrs = f71805f_attributes_optin[3] },
+};
+
+/* We don't include pwm_freq files in the arrays above, because they must be
+   created conditionally (only if pwm_mode is 1 == PWM) */
+static struct attribute *f71805f_attributes_pwm_freq[] = {
+	&sensor_dev_attr_pwm1_freq.dev_attr.attr,
+	&sensor_dev_attr_pwm2_freq.dev_attr.attr,
+	&sensor_dev_attr_pwm3_freq.dev_attr.attr,
+	NULL
+};
+
+static const struct attribute_group f71805f_group_pwm_freq = {
+	.attrs = f71805f_attributes_pwm_freq,
+};
+
+/* We also need an indexed access to pwmN files to toggle writability */
+static struct attribute *f71805f_attr_pwm[] = {
+	&sensor_dev_attr_pwm1.dev_attr.attr,
+	&sensor_dev_attr_pwm2.dev_attr.attr,
+	&sensor_dev_attr_pwm3.dev_attr.attr,
 };
 
 /*
@@ -798,18 +1118,30 @@ static void __devinit f71805f_init_device(struct f71805f_data *data)
 	/* Fan monitoring can be disabled. If it is, we won't be polling
 	   the register values, and won't create the related sysfs files. */
 	for (i = 0; i < 3; i++) {
-		reg = f71805f_read8(data, F71805F_REG_FAN_CTRL(i));
-		if (!(reg & 0x80))
-			data->fan_enabled |= (1 << i);
+		data->fan_ctrl[i] = f71805f_read8(data,
+						  F71805F_REG_FAN_CTRL(i));
+		/* Clear latch full bit, else "speed mode" fan speed control
+		   doesn't work */
+		if (data->fan_ctrl[i] & FAN_CTRL_LATCH_FULL) {
+			data->fan_ctrl[i] &= ~FAN_CTRL_LATCH_FULL;
+			f71805f_write8(data, F71805F_REG_FAN_CTRL(i),
+				       data->fan_ctrl[i]);
+		}
 	}
 }
 
 static int __devinit f71805f_probe(struct platform_device *pdev)
 {
+	struct f71805f_sio_data *sio_data = pdev->dev.platform_data;
 	struct f71805f_data *data;
 	struct resource *res;
 	int i, err;
 
+	static const char *names[] = {
+		"f71805f",
+		"f71872f",
+	};
+
 	if (!(data = kzalloc(sizeof(struct f71805f_data), GFP_KERNEL))) {
 		err = -ENOMEM;
 		printk(KERN_ERR DRVNAME ": Out of memory\n");
@@ -819,24 +1151,69 @@ static int __devinit f71805f_probe(struct platform_device *pdev)
 	res = platform_get_resource(pdev, IORESOURCE_IO, 0);
 	data->addr = res->start;
 	mutex_init(&data->lock);
-	data->name = "f71805f";
+	data->name = names[sio_data->kind];
 	mutex_init(&data->update_lock);
 
 	platform_set_drvdata(pdev, data);
 
+	/* Some voltage inputs depend on chip model and configuration */
+	switch (sio_data->kind) {
+	case f71805f:
+		data->has_in = 0x1ff;
+		break;
+	case f71872f:
+		data->has_in = 0x6ef;
+		if (sio_data->fnsel1 & 0x01)
+			data->has_in |= (1 << 4); /* in4 */
+		if (sio_data->fnsel1 & 0x02)
+			data->has_in |= (1 << 8); /* in8 */
+		break;
+	}
+
 	/* Initialize the F71805F chip */
 	f71805f_init_device(data);
 
 	/* Register sysfs interface files */
 	if ((err = sysfs_create_group(&pdev->dev.kobj, &f71805f_group)))
 		goto exit_free;
-	for (i = 0; i < 3; i++) {
-		if (!(data->fan_enabled & (1 << i)))
-			continue;
+	if (data->has_in & (1 << 4)) { /* in4 */
+		if ((err = sysfs_create_group(&pdev->dev.kobj,
+					      &f71805f_group_optin[0])))
+			goto exit_remove_files;
+	}
+	if (data->has_in & (1 << 8)) { /* in8 */
+		if ((err = sysfs_create_group(&pdev->dev.kobj,
+					      &f71805f_group_optin[1])))
+			goto exit_remove_files;
+	}
+	if (data->has_in & (1 << 9)) { /* in9 (F71872F/FG only) */
 		if ((err = sysfs_create_group(&pdev->dev.kobj,
-					      &f71805f_group_fan[i])))
+					      &f71805f_group_optin[2])))
 			goto exit_remove_files;
 	}
+	if (data->has_in & (1 << 10)) { /* in9 (F71872F/FG only) */
+		if ((err = sysfs_create_group(&pdev->dev.kobj,
+					      &f71805f_group_optin[3])))
+			goto exit_remove_files;
+	}
+	for (i = 0; i < 3; i++) {
+		/* If control mode is PWM, create pwm_freq file */
+		if (!(data->fan_ctrl[i] & FAN_CTRL_DC_MODE)) {
+			if ((err = sysfs_create_file(&pdev->dev.kobj,
+					f71805f_attributes_pwm_freq[i])))
+				goto exit_remove_files;
+		}
+		/* If PWM is in manual mode, add write permission */
+		if (data->fan_ctrl[i] & FAN_CTRL_MODE_MANUAL) {
+			if ((err = sysfs_chmod_file(&pdev->dev.kobj,
+						    f71805f_attr_pwm[i],
+						    S_IRUGO | S_IWUSR))) {
+				dev_err(&pdev->dev, "chmod +w pwm%d failed\n",
+					i + 1);
+				goto exit_remove_files;
+			}
+		}
+	}
 
 	data->class_dev = hwmon_device_register(&pdev->dev);
 	if (IS_ERR(data->class_dev)) {
@@ -849,8 +1226,9 @@ static int __devinit f71805f_probe(struct platform_device *pdev)
 
 exit_remove_files:
 	sysfs_remove_group(&pdev->dev.kobj, &f71805f_group);
-	for (i = 0; i < 3; i++)
-		sysfs_remove_group(&pdev->dev.kobj, &f71805f_group_fan[i]);
+	for (i = 0; i < 4; i++)
+		sysfs_remove_group(&pdev->dev.kobj, &f71805f_group_optin[i]);
+	sysfs_remove_group(&pdev->dev.kobj, &f71805f_group_pwm_freq);
 exit_free:
 	platform_set_drvdata(pdev, NULL);
 	kfree(data);
@@ -866,8 +1244,9 @@ static int __devexit f71805f_remove(struct platform_device *pdev)
 	platform_set_drvdata(pdev, NULL);
 	hwmon_device_unregister(data->class_dev);
 	sysfs_remove_group(&pdev->dev.kobj, &f71805f_group);
-	for (i = 0; i < 3; i++)
-		sysfs_remove_group(&pdev->dev.kobj, &f71805f_group_fan[i]);
+	for (i = 0; i < 4; i++)
+		sysfs_remove_group(&pdev->dev.kobj, &f71805f_group_optin[i]);
+	sysfs_remove_group(&pdev->dev.kobj, &f71805f_group_pwm_freq);
 	kfree(data);
 
 	return 0;
@@ -882,7 +1261,8 @@ static struct platform_driver f71805f_driver = {
 	.remove		= __devexit_p(f71805f_remove),
 };
 
-static int __init f71805f_device_add(unsigned short address)
+static int __init f71805f_device_add(unsigned short address,
+				     const struct f71805f_sio_data *sio_data)
 {
 	struct resource res = {
 		.start	= address,
@@ -906,26 +1286,45 @@ static int __init f71805f_device_add(unsigned short address)
 		goto exit_device_put;
 	}
 
+	pdev->dev.platform_data = kmalloc(sizeof(struct f71805f_sio_data),
+					  GFP_KERNEL);
+	if (!pdev->dev.platform_data) {
+		err = -ENOMEM;
+		printk(KERN_ERR DRVNAME ": Platform data allocation failed\n");
+		goto exit_device_put;
+	}
+	memcpy(pdev->dev.platform_data, sio_data,
+	       sizeof(struct f71805f_sio_data));
+
 	err = platform_device_add(pdev);
 	if (err) {
 		printk(KERN_ERR DRVNAME ": Device addition failed (%d)\n",
 		       err);
-		goto exit_device_put;
+		goto exit_kfree_data;
 	}
 
 	return 0;
 
+exit_kfree_data:
+	kfree(pdev->dev.platform_data);
+	pdev->dev.platform_data = NULL;
 exit_device_put:
 	platform_device_put(pdev);
 exit:
 	return err;
 }
 
-static int __init f71805f_find(int sioaddr, unsigned short *address)
+static int __init f71805f_find(int sioaddr, unsigned short *address,
+			       struct f71805f_sio_data *sio_data)
 {
 	int err = -ENODEV;
 	u16 devid;
 
+	static const char *names[] = {
+		"F71805F/FG",
+		"F71872F/FG",
+	};
+
 	superio_enter(sioaddr);
 
 	devid = superio_inw(sioaddr, SIO_REG_MANID);
@@ -933,7 +1332,15 @@ static int __init f71805f_find(int sioaddr, unsigned short *address)
 		goto exit;
 
 	devid = superio_inw(sioaddr, SIO_REG_DEVID);
-	if (devid != SIO_F71805F_ID) {
+	switch (devid) {
+	case SIO_F71805F_ID:
+		sio_data->kind = f71805f;
+		break;
+	case SIO_F71872F_ID:
+		sio_data->kind = f71872f;
+		sio_data->fnsel1 = superio_inb(sioaddr, SIO_REG_FNSEL1);
+		break;
+	default:
 		printk(KERN_INFO DRVNAME ": Unsupported Fintek device, "
 		       "skipping\n");
 		goto exit;
@@ -952,10 +1359,12 @@ static int __init f71805f_find(int sioaddr, unsigned short *address)
 		       "skipping\n");
 		goto exit;
 	}
+	*address &= ~(REGION_LENGTH - 1);	/* Ignore 3 LSB */
 
 	err = 0;
-	printk(KERN_INFO DRVNAME ": Found F71805F chip at %#x, revision %u\n",
-	       *address, superio_inb(sioaddr, SIO_REG_DEVREV));
+	printk(KERN_INFO DRVNAME ": Found %s chip at %#x, revision %u\n",
+	       names[sio_data->kind], *address,
+	       superio_inb(sioaddr, SIO_REG_DEVREV));
 
 exit:
 	superio_exit(sioaddr);
@@ -966,9 +1375,10 @@ static int __init f71805f_init(void)
 {
 	int err;
 	unsigned short address;
+	struct f71805f_sio_data sio_data;
 
-	if (f71805f_find(0x2e, &address)
-	 && f71805f_find(0x4e, &address))
+	if (f71805f_find(0x2e, &address, &sio_data)
+	 && f71805f_find(0x4e, &address, &sio_data))
 		return -ENODEV;
 
 	err = platform_driver_register(&f71805f_driver);
@@ -976,7 +1386,7 @@ static int __init f71805f_init(void)
 		goto exit;
 
 	/* Sets global pdev as a side effect */
-	err = f71805f_device_add(address);
+	err = f71805f_device_add(address, &sio_data);
 	if (err)
 		goto exit_driver;
 
@@ -990,13 +1400,16 @@ exit:
 
 static void __exit f71805f_exit(void)
 {
+	kfree(pdev->dev.platform_data);
+	pdev->dev.platform_data = NULL;
 	platform_device_unregister(pdev);
+
 	platform_driver_unregister(&f71805f_driver);
 }
 
 MODULE_AUTHOR("Jean Delvare <khali@linux-fr>");
 MODULE_LICENSE("GPL");
-MODULE_DESCRIPTION("F71805F hardware monitoring driver");
+MODULE_DESCRIPTION("F71805F/F71872F hardware monitoring driver");
 
 module_init(f71805f_init);
 module_exit(f71805f_exit);
diff --git a/drivers/hwmon/hdaps.c b/drivers/hwmon/hdaps.c
index e8ef62b83d6b..bf759ea545ac 100644
--- a/drivers/hwmon/hdaps.c
+++ b/drivers/hwmon/hdaps.c
@@ -478,74 +478,64 @@ static struct attribute_group hdaps_attribute_group = {
 /* Module stuff */
 
 /* hdaps_dmi_match - found a match.  return one, short-circuiting the hunt. */
-static int hdaps_dmi_match(struct dmi_system_id *id)
+static int __init hdaps_dmi_match(struct dmi_system_id *id)
 {
 	printk(KERN_INFO "hdaps: %s detected.\n", id->ident);
 	return 1;
 }
 
 /* hdaps_dmi_match_invert - found an inverted match. */
-static int hdaps_dmi_match_invert(struct dmi_system_id *id)
+static int __init hdaps_dmi_match_invert(struct dmi_system_id *id)
 {
 	hdaps_invert = 1;
 	printk(KERN_INFO "hdaps: inverting axis readings.\n");
 	return hdaps_dmi_match(id);
 }
 
-#define HDAPS_DMI_MATCH_NORMAL(model)	{		\
-	.ident = "IBM " model,				\
+#define HDAPS_DMI_MATCH_NORMAL(vendor, model) {		\
+	.ident = vendor " " model,			\
 	.callback = hdaps_dmi_match,			\
 	.matches = {					\
-		DMI_MATCH(DMI_BOARD_VENDOR, "IBM"),	\
+		DMI_MATCH(DMI_BOARD_VENDOR, vendor),	\
 		DMI_MATCH(DMI_PRODUCT_VERSION, model)	\
 	}						\
 }
 
-#define HDAPS_DMI_MATCH_INVERT(model)	{		\
-	.ident = "IBM " model,				\
+#define HDAPS_DMI_MATCH_INVERT(vendor, model) {		\
+	.ident = vendor " " model,			\
 	.callback = hdaps_dmi_match_invert,		\
 	.matches = {					\
-		DMI_MATCH(DMI_BOARD_VENDOR, "IBM"),	\
+		DMI_MATCH(DMI_BOARD_VENDOR, vendor),	\
 		DMI_MATCH(DMI_PRODUCT_VERSION, model)	\
 	}						\
 }
 
-#define HDAPS_DMI_MATCH_LENOVO(model)   {               \
-        .ident = "Lenovo " model,                       \
-        .callback = hdaps_dmi_match_invert,             \
-        .matches = {                                    \
-                DMI_MATCH(DMI_BOARD_VENDOR, "LENOVO"),  \
-                DMI_MATCH(DMI_PRODUCT_VERSION, model)   \
-        }                                               \
-}
+/* Note that HDAPS_DMI_MATCH_NORMAL("ThinkPad T42") would match
+   "ThinkPad T42p", so the order of the entries matters.
+   If your ThinkPad is not recognized, please update to latest
+   BIOS. This is especially the case for some R52 ThinkPads. */
+static struct dmi_system_id __initdata hdaps_whitelist[] = {
+	HDAPS_DMI_MATCH_INVERT("IBM", "ThinkPad R50p"),
+	HDAPS_DMI_MATCH_NORMAL("IBM", "ThinkPad R50"),
+	HDAPS_DMI_MATCH_NORMAL("IBM", "ThinkPad R51"),
+	HDAPS_DMI_MATCH_NORMAL("IBM", "ThinkPad R52"),
+	HDAPS_DMI_MATCH_INVERT("IBM", "ThinkPad T41p"),
+	HDAPS_DMI_MATCH_NORMAL("IBM", "ThinkPad T41"),
+	HDAPS_DMI_MATCH_INVERT("IBM", "ThinkPad T42p"),
+	HDAPS_DMI_MATCH_NORMAL("IBM", "ThinkPad T42"),
+	HDAPS_DMI_MATCH_NORMAL("IBM", "ThinkPad T43"),
+	HDAPS_DMI_MATCH_INVERT("LENOVO", "ThinkPad T60"),
+	HDAPS_DMI_MATCH_NORMAL("IBM", "ThinkPad X40"),
+	HDAPS_DMI_MATCH_NORMAL("IBM", "ThinkPad X41"),
+	HDAPS_DMI_MATCH_INVERT("LENOVO", "ThinkPad X60"),
+	HDAPS_DMI_MATCH_NORMAL("IBM", "ThinkPad Z60m"),
+	{ .ident = NULL }
+};
 
 static int __init hdaps_init(void)
 {
 	int ret;
 
-	/* Note that HDAPS_DMI_MATCH_NORMAL("ThinkPad T42") would match
-	  "ThinkPad T42p", so the order of the entries matters */
-	struct dmi_system_id hdaps_whitelist[] = {
-		HDAPS_DMI_MATCH_NORMAL("ThinkPad H"),
-		HDAPS_DMI_MATCH_INVERT("ThinkPad R50p"),
-		HDAPS_DMI_MATCH_NORMAL("ThinkPad R50"),
-		HDAPS_DMI_MATCH_NORMAL("ThinkPad R51"),
-		HDAPS_DMI_MATCH_NORMAL("ThinkPad R52"),
-		HDAPS_DMI_MATCH_NORMAL("ThinkPad H"),	 /* R52 (1846AQG) */
-		HDAPS_DMI_MATCH_INVERT("ThinkPad T41p"),
-		HDAPS_DMI_MATCH_NORMAL("ThinkPad T41"),
-		HDAPS_DMI_MATCH_INVERT("ThinkPad T42p"),
-		HDAPS_DMI_MATCH_NORMAL("ThinkPad T42"),
-		HDAPS_DMI_MATCH_NORMAL("ThinkPad T43"),
-		HDAPS_DMI_MATCH_LENOVO("ThinkPad T60p"),
-		HDAPS_DMI_MATCH_LENOVO("ThinkPad T60"),
-		HDAPS_DMI_MATCH_NORMAL("ThinkPad X40"),
-		HDAPS_DMI_MATCH_NORMAL("ThinkPad X41"),
-		HDAPS_DMI_MATCH_LENOVO("ThinkPad X60"),
-		HDAPS_DMI_MATCH_NORMAL("ThinkPad Z60m"),
-		{ .ident = NULL }
-	};
-
 	if (!dmi_check_system(hdaps_whitelist)) {
 		printk(KERN_WARNING "hdaps: supported laptop not found!\n");
 		ret = -ENODEV;
diff --git a/drivers/hwmon/hwmon-vid.c b/drivers/hwmon/hwmon-vid.c
index 9d67320e6840..31c42002708f 100644
--- a/drivers/hwmon/hwmon-vid.c
+++ b/drivers/hwmon/hwmon-vid.c
@@ -1,7 +1,7 @@
 /*
     hwmon-vid.c - VID/VRM/VRD voltage conversions
 
-    Copyright (c) 2004 Rudolf Marek <r.marek@sh.cvut.cz>
+    Copyright (c) 2004 Rudolf Marek <r.marek@assembler.cz>
 
     Partly imported from i2c-vid.h of the lm_sensors project
     Copyright (c) 2002 Mark D. Studebaker <mdsxyz123@yahoo.com>
@@ -232,7 +232,7 @@ u8 vid_which_vrm(void)
 EXPORT_SYMBOL(vid_from_reg);
 EXPORT_SYMBOL(vid_which_vrm);
 
-MODULE_AUTHOR("Rudolf Marek <r.marek@sh.cvut.cz>");
+MODULE_AUTHOR("Rudolf Marek <r.marek@assembler.cz>");
 
 MODULE_DESCRIPTION("hwmon-vid driver");
 MODULE_LICENSE("GPL");
diff --git a/drivers/hwmon/it87.c b/drivers/hwmon/it87.c
index 323ef06719c1..1ed8b7e2c35d 100644
--- a/drivers/hwmon/it87.c
+++ b/drivers/hwmon/it87.c
@@ -3,7 +3,7 @@
              monitoring.
 
     Supports: IT8705F  Super I/O chip w/LPC interface
-              IT8712F  Super I/O chip w/LPC interface & SMBus
+              IT8712F  Super I/O chip w/LPC interface
               IT8716F  Super I/O chip w/LPC interface
               IT8718F  Super I/O chip w/LPC interface
               Sis950   A clone of the IT8705F
@@ -41,12 +41,8 @@
 #include <asm/io.h>
 
 
-/* Addresses to scan */
-static unsigned short normal_i2c[] = { 0x2d, I2C_CLIENT_END };
 static unsigned short isa_address;
-
-/* Insmod parameters */
-I2C_CLIENT_INSMOD_4(it87, it8712, it8716, it8718);
+enum chips { it87, it8712, it8716, it8718 };
 
 #define	REG	0x2e	/* The register to read/write */
 #define	DEV	0x07	/* Register: Logical device select */
@@ -162,8 +158,6 @@ static u8 vid_value;
 #define IT87_REG_TEMP_HIGH(nr) (0x40 + (nr) * 2)
 #define IT87_REG_TEMP_LOW(nr)  (0x41 + (nr) * 2)
 
-#define IT87_REG_I2C_ADDR      0x48
-
 #define IT87_REG_VIN_ENABLE    0x50
 #define IT87_REG_TEMP_ENABLE   0x51
 
@@ -242,33 +236,22 @@ struct it87_data {
 };
 
 
-static int it87_attach_adapter(struct i2c_adapter *adapter);
-static int it87_isa_attach_adapter(struct i2c_adapter *adapter);
-static int it87_detect(struct i2c_adapter *adapter, int address, int kind);
+static int it87_detect(struct i2c_adapter *adapter);
 static int it87_detach_client(struct i2c_client *client);
 
 static int it87_read_value(struct i2c_client *client, u8 reg);
-static int it87_write_value(struct i2c_client *client, u8 reg, u8 value);
+static void it87_write_value(struct i2c_client *client, u8 reg, u8 value);
 static struct it87_data *it87_update_device(struct device *dev);
 static int it87_check_pwm(struct i2c_client *client);
 static void it87_init_client(struct i2c_client *client, struct it87_data *data);
 
 
-static struct i2c_driver it87_driver = {
-	.driver = {
-		.name	= "it87",
-	},
-	.id		= I2C_DRIVERID_IT87,
-	.attach_adapter	= it87_attach_adapter,
-	.detach_client	= it87_detach_client,
-};
-
 static struct i2c_driver it87_isa_driver = {
 	.driver = {
 		.owner	= THIS_MODULE,
 		.name	= "it87-isa",
 	},
-	.attach_adapter	= it87_isa_attach_adapter,
+	.attach_adapter	= it87_detect,
 	.detach_client	= it87_detach_client,
 };
 
@@ -850,22 +833,6 @@ static const struct attribute_group it87_group_opt = {
 	.attrs = it87_attributes_opt,
 };
 
-/* This function is called when:
-     * it87_driver is inserted (when this module is loaded), for each
-       available adapter
-     * when a new adapter is inserted (and it87_driver is still present) */
-static int it87_attach_adapter(struct i2c_adapter *adapter)
-{
-	if (!(adapter->class & I2C_CLASS_HWMON))
-		return 0;
-	return i2c_probe(adapter, &addr_data, it87_detect);
-}
-
-static int it87_isa_attach_adapter(struct i2c_adapter *adapter)
-{
-	return it87_detect(adapter, isa_address, -1);
-}
-
 /* SuperIO detection - will change isa_address if a chip is found */
 static int __init it87_find(unsigned short *address)
 {
@@ -916,29 +883,20 @@ exit:
 }
 
 /* This function is called by i2c_probe */
-static int it87_detect(struct i2c_adapter *adapter, int address, int kind)
+static int it87_detect(struct i2c_adapter *adapter)
 {
-	int i;
 	struct i2c_client *new_client;
 	struct it87_data *data;
 	int err = 0;
-	const char *name = "";
-	int is_isa = i2c_is_isa_adapter(adapter);
+	const char *name;
 	int enable_pwm_interface;
 
-	if (!is_isa && 
-	    !i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
-		goto ERROR0;
-
 	/* Reserve the ISA region */
-	if (is_isa)
-		if (!request_region(address, IT87_EXTENT,
-				    it87_isa_driver.driver.name))
-			goto ERROR0;
-
-	/* For now, we presume we have a valid client. We create the
-	   client structure, even though we cannot fill it completely yet.
-	   But it allows us to access it87_{read,write}_value. */
+	if (!request_region(isa_address, IT87_EXTENT,
+			    it87_isa_driver.driver.name)){
+		err = -EBUSY;
+		goto ERROR0;
+	}
 
 	if (!(data = kzalloc(sizeof(struct it87_data), GFP_KERNEL))) {
 		err = -ENOMEM;
@@ -946,80 +904,46 @@ static int it87_detect(struct i2c_adapter *adapter, int address, int kind)
 	}
 
 	new_client = &data->client;
-	if (is_isa)
-		mutex_init(&data->lock);
+	mutex_init(&data->lock);
 	i2c_set_clientdata(new_client, data);
-	new_client->addr = address;
+	new_client->addr = isa_address;
 	new_client->adapter = adapter;
-	new_client->driver = is_isa ? &it87_isa_driver : &it87_driver;
-	new_client->flags = 0;
+	new_client->driver = &it87_isa_driver;
 
 	/* Now, we do the remaining detection. */
-
-	if (kind < 0) {
-		if ((it87_read_value(new_client, IT87_REG_CONFIG) & 0x80)
-		  || (!is_isa
-		   && it87_read_value(new_client, IT87_REG_I2C_ADDR) != address)) {
-		   	err = -ENODEV;
-			goto ERROR2;
-		}
+	if ((it87_read_value(new_client, IT87_REG_CONFIG) & 0x80)
+	 || it87_read_value(new_client, IT87_REG_CHIPID) != 0x90) {
+		err = -ENODEV;
+		goto ERROR2;
 	}
 
 	/* Determine the chip type. */
-	if (kind <= 0) {
-		i = it87_read_value(new_client, IT87_REG_CHIPID);
-		if (i == 0x90) {
-			kind = it87;
-			if (is_isa) {
-				switch (chip_type) {
-				case IT8712F_DEVID:
-					kind = it8712;
-					break;
-				case IT8716F_DEVID:
-					kind = it8716;
-					break;
-				case IT8718F_DEVID:
-					kind = it8718;
-					break;
-				}
-			}
-		}
-		else {
-			if (kind == 0)
-				dev_info(&adapter->dev, 
-					"Ignoring 'force' parameter for unknown chip at "
-					"adapter %d, address 0x%02x\n",
-					i2c_adapter_id(adapter), address);
-			err = -ENODEV;
-			goto ERROR2;
-		}
-	}
-
-	if (kind == it87) {
-		name = "it87";
-	} else if (kind == it8712) {
+	switch (chip_type) {
+	case IT8712F_DEVID:
+		data->type = it8712;
 		name = "it8712";
-	} else if (kind == it8716) {
+		break;
+	case IT8716F_DEVID:
+		data->type = it8716;
 		name = "it8716";
-	} else if (kind == it8718) {
+		break;
+	case IT8718F_DEVID:
+		data->type = it8718;
 		name = "it8718";
+		break;
+	default:
+		data->type = it87;
+		name = "it87";
 	}
 
 	/* Fill in the remaining client fields and put it into the global list */
 	strlcpy(new_client->name, name, I2C_NAME_SIZE);
-	data->type = kind;
-	data->valid = 0;
 	mutex_init(&data->update_lock);
 
 	/* Tell the I2C layer a new client has arrived */
 	if ((err = i2c_attach_client(new_client)))
 		goto ERROR2;
 
-	if (!is_isa)
-		dev_info(&new_client->dev, "The I2C interface to IT87xxF "
-			 "hardware monitoring chips is deprecated. Please "
-			 "report if you still rely on it.\n");
-
 	/* Check PWM configuration */
 	enable_pwm_interface = it87_check_pwm(new_client);
 
@@ -1129,8 +1053,7 @@ ERROR3:
 ERROR2:
 	kfree(data);
 ERROR1:
-	if (is_isa)
-		release_region(address, IT87_EXTENT);
+	release_region(isa_address, IT87_EXTENT);
 ERROR0:
 	return err;
 }
@@ -1147,50 +1070,39 @@ static int it87_detach_client(struct i2c_client *client)
 	if ((err = i2c_detach_client(client)))
 		return err;
 
-	if(i2c_is_isa_client(client))
-		release_region(client->addr, IT87_EXTENT);
+	release_region(client->addr, IT87_EXTENT);
 	kfree(data);
 
 	return 0;
 }
 
-/* The SMBus locks itself, but ISA access must be locked explicitly! 
-   We don't want to lock the whole ISA bus, so we lock each client
-   separately.
+/* ISA access must be locked explicitly!
    We ignore the IT87 BUSY flag at this moment - it could lead to deadlocks,
    would slow down the IT87 access and should not be necessary. */
 static int it87_read_value(struct i2c_client *client, u8 reg)
 {
 	struct it87_data *data = i2c_get_clientdata(client);
-
 	int res;
-	if (i2c_is_isa_client(client)) {
-		mutex_lock(&data->lock);
-		outb_p(reg, client->addr + IT87_ADDR_REG_OFFSET);
-		res = inb_p(client->addr + IT87_DATA_REG_OFFSET);
-		mutex_unlock(&data->lock);
-		return res;
-	} else
-		return i2c_smbus_read_byte_data(client, reg);
+
+	mutex_lock(&data->lock);
+	outb_p(reg, client->addr + IT87_ADDR_REG_OFFSET);
+	res = inb_p(client->addr + IT87_DATA_REG_OFFSET);
+	mutex_unlock(&data->lock);
+
+	return res;
 }
 
-/* The SMBus locks itself, but ISA access muse be locked explicitly! 
-   We don't want to lock the whole ISA bus, so we lock each client
-   separately.
+/* ISA access must be locked explicitly!
    We ignore the IT87 BUSY flag at this moment - it could lead to deadlocks,
    would slow down the IT87 access and should not be necessary. */
-static int it87_write_value(struct i2c_client *client, u8 reg, u8 value)
+static void it87_write_value(struct i2c_client *client, u8 reg, u8 value)
 {
 	struct it87_data *data = i2c_get_clientdata(client);
 
-	if (i2c_is_isa_client(client)) {
-		mutex_lock(&data->lock);
-		outb_p(reg, client->addr + IT87_ADDR_REG_OFFSET);
-		outb_p(value, client->addr + IT87_DATA_REG_OFFSET);
-		mutex_unlock(&data->lock);
-		return 0;
-	} else
-		return i2c_smbus_write_byte_data(client, reg, value);
+	mutex_lock(&data->lock);
+	outb_p(reg, client->addr + IT87_ADDR_REG_OFFSET);
+	outb_p(value, client->addr + IT87_DATA_REG_OFFSET);
+	mutex_unlock(&data->lock);
 }
 
 /* Return 1 if and only if the PWM interface is safe to use */
@@ -1426,26 +1338,14 @@ static int __init sm_it87_init(void)
 {
 	int res;
 
-	res = i2c_add_driver(&it87_driver);
-	if (res)
+	if ((res = it87_find(&isa_address)))
 		return res;
-
-	if (!it87_find(&isa_address)) {
-		res = i2c_isa_add_driver(&it87_isa_driver);
-		if (res) {
-			i2c_del_driver(&it87_driver);
-			return res;
-		}
-	}
-
-	return 0;
+	return i2c_isa_add_driver(&it87_isa_driver);
 }
 
 static void __exit sm_it87_exit(void)
 {
-	if (isa_address)
-		i2c_isa_del_driver(&it87_isa_driver);
-	i2c_del_driver(&it87_driver);
+	i2c_isa_del_driver(&it87_isa_driver);
 }
 
 
diff --git a/drivers/hwmon/k8temp.c b/drivers/hwmon/k8temp.c
index f58b64ed09e3..5d8d0ca08fa9 100644
--- a/drivers/hwmon/k8temp.c
+++ b/drivers/hwmon/k8temp.c
@@ -1,7 +1,7 @@
 /*
  * k8temp.c - Linux kernel module for hardware monitoring
  *
- * Copyright (C) 2006 Rudolf Marek <r.marek@sh.cvut.cz>
+ * Copyright (C) 2006 Rudolf Marek <r.marek@assembler.cz>
  *
  * Inspired from the w83785 and amd756 drivers.
  *
@@ -286,7 +286,7 @@ static void __exit k8temp_exit(void)
 	pci_unregister_driver(&k8temp_driver);
 }
 
-MODULE_AUTHOR("Rudolf Marek <r.marek@sh.cvut.cz>");
+MODULE_AUTHOR("Rudolf Marek <r.marek@assembler.cz>");
 MODULE_DESCRIPTION("AMD K8 core temperature monitor");
 MODULE_LICENSE("GPL");
 
diff --git a/drivers/hwmon/pc87360.c b/drivers/hwmon/pc87360.c
index 3b8b81984ad4..c8a21be09d87 100644
--- a/drivers/hwmon/pc87360.c
+++ b/drivers/hwmon/pc87360.c
@@ -1000,7 +1000,7 @@ static int pc87360_detect(struct i2c_adapter *adapter)
 			(i&0x02) ? "external" : "internal");
 
 		data->vid_conf = confreg[3];
-		data->vrm = 90;
+		data->vrm = vid_which_vrm();
 	}
 
 	/* Fan clock dividers may be needed before any data is read */
diff --git a/drivers/hwmon/pc87427.c b/drivers/hwmon/pc87427.c
new file mode 100644
index 000000000000..affa21a5ccfd
--- /dev/null
+++ b/drivers/hwmon/pc87427.c
@@ -0,0 +1,627 @@
+/*
+ *  pc87427.c - hardware monitoring driver for the
+ *              National Semiconductor PC87427 Super-I/O chip
+ *  Copyright (C) 2006 Jean Delvare <khali@linux-fr.org>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  Supports the following chips:
+ *
+ *  Chip        #vin    #fan    #pwm    #temp   devid
+ *  PC87427     -       8       -       -       0xF2
+ *
+ *  This driver assumes that no more than one chip is present.
+ *  Only fan inputs are supported so far, although the chip can do much more.
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/jiffies.h>
+#include <linux/platform_device.h>
+#include <linux/hwmon.h>
+#include <linux/hwmon-sysfs.h>
+#include <linux/err.h>
+#include <linux/mutex.h>
+#include <linux/sysfs.h>
+#include <asm/io.h>
+
+static struct platform_device *pdev;
+
+#define DRVNAME "pc87427"
+
+/* The lock mutex protects both the I/O accesses (needed because the
+   device is using banked registers) and the register cache (needed to keep
+   the data in the registers and the cache in sync at any time). */
+struct pc87427_data {
+	struct class_device *class_dev;
+	struct mutex lock;
+	int address[2];
+	const char *name;
+
+	unsigned long last_updated;	/* in jiffies */
+	u8 fan_enabled;			/* bit vector */
+	u16 fan[8];			/* register values */
+	u16 fan_min[8];			/* register values */
+	u8 fan_status[8];		/* register values */
+};
+
+/*
+ * Super-I/O registers and operations
+ */
+
+#define SIOREG_LDSEL	0x07	/* Logical device select */
+#define SIOREG_DEVID	0x20	/* Device ID */
+#define SIOREG_ACT	0x30	/* Device activation */
+#define SIOREG_MAP	0x50	/* I/O or memory mapping */
+#define SIOREG_IOBASE	0x60	/* I/O base address */
+
+static const u8 logdev[2] = { 0x09, 0x14 };
+static const char *logdev_str[2] = { DRVNAME " FMC", DRVNAME " HMC" };
+#define LD_FAN		0
+#define LD_IN		1
+#define LD_TEMP		1
+
+static inline void superio_outb(int sioaddr, int reg, int val)
+{
+	outb(reg, sioaddr);
+	outb(val, sioaddr + 1);
+}
+
+static inline int superio_inb(int sioaddr, int reg)
+{
+	outb(reg, sioaddr);
+	return inb(sioaddr + 1);
+}
+
+static inline void superio_exit(int sioaddr)
+{
+	outb(0x02, sioaddr);
+	outb(0x02, sioaddr + 1);
+}
+
+/*
+ * Logical devices
+ */
+
+#define REGION_LENGTH		32
+#define PC87427_REG_BANK	0x0f
+#define BANK_FM(nr)		(nr)
+#define BANK_FT(nr)		(0x08 + (nr))
+#define BANK_FC(nr)		(0x10 + (nr) * 2)
+
+/*
+ * I/O access functions
+ */
+
+/* ldi is the logical device index */
+static inline int pc87427_read8(struct pc87427_data *data, u8 ldi, u8 reg)
+{
+	return inb(data->address[ldi] + reg);
+}
+
+/* Must be called with data->lock held, except during init */
+static inline int pc87427_read8_bank(struct pc87427_data *data, u8 ldi,
+				     u8 bank, u8 reg)
+{
+	outb(bank, data->address[ldi] + PC87427_REG_BANK);
+	return inb(data->address[ldi] + reg);
+}
+
+/* Must be called with data->lock held, except during init */
+static inline void pc87427_write8_bank(struct pc87427_data *data, u8 ldi,
+				       u8 bank, u8 reg, u8 value)
+{
+	outb(bank, data->address[ldi] + PC87427_REG_BANK);
+	outb(value, data->address[ldi] + reg);
+}
+
+/*
+ * Fan registers and conversions
+ */
+
+/* fan data registers are 16-bit wide */
+#define PC87427_REG_FAN			0x12
+#define PC87427_REG_FAN_MIN		0x14
+#define PC87427_REG_FAN_STATUS		0x10
+
+#define FAN_STATUS_STALL		(1 << 3)
+#define FAN_STATUS_LOSPD		(1 << 1)
+#define FAN_STATUS_MONEN		(1 << 0)
+
+/* Dedicated function to read all registers related to a given fan input.
+   This saves us quite a few locks and bank selections.
+   Must be called with data->lock held.
+   nr is from 0 to 7 */
+static void pc87427_readall_fan(struct pc87427_data *data, u8 nr)
+{
+	int iobase = data->address[LD_FAN];
+
+	outb(BANK_FM(nr), iobase + PC87427_REG_BANK);
+	data->fan[nr] = inw(iobase + PC87427_REG_FAN);
+	data->fan_min[nr] = inw(iobase + PC87427_REG_FAN_MIN);
+	data->fan_status[nr] = inb(iobase + PC87427_REG_FAN_STATUS);
+	/* Clear fan alarm bits */
+	outb(data->fan_status[nr], iobase + PC87427_REG_FAN_STATUS);
+}
+
+/* The 2 LSB of fan speed registers are used for something different.
+   The actual 2 LSB of the measurements are not available. */
+static inline unsigned long fan_from_reg(u16 reg)
+{
+	reg &= 0xfffc;
+	if (reg == 0x0000 || reg == 0xfffc)
+		return 0;
+	return 5400000UL / reg;
+}
+
+/* The 2 LSB of the fan speed limit registers are not significant. */
+static inline u16 fan_to_reg(unsigned long val)
+{
+	if (val < 83UL)
+		return 0xffff;
+	if (val >= 1350000UL)
+		return 0x0004;
+	return ((1350000UL + val / 2) / val) << 2;
+}
+
+/*
+ * Data interface
+ */
+
+static struct pc87427_data *pc87427_update_device(struct device *dev)
+{
+	struct pc87427_data *data = dev_get_drvdata(dev);
+	int i;
+
+	mutex_lock(&data->lock);
+	if (!time_after(jiffies, data->last_updated + HZ)
+	 && data->last_updated)
+		goto done;
+
+	/* Fans */
+	for (i = 0; i < 8; i++) {
+		if (!(data->fan_enabled & (1 << i)))
+			continue;
+		pc87427_readall_fan(data, i);
+	}
+	data->last_updated = jiffies;
+
+done:
+	mutex_unlock(&data->lock);
+	return data;
+}
+
+static ssize_t show_fan_input(struct device *dev, struct device_attribute
+			      *devattr, char *buf)
+{
+	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+	struct pc87427_data *data = pc87427_update_device(dev);
+	int nr = attr->index;
+
+	return sprintf(buf, "%lu\n", fan_from_reg(data->fan[nr]));
+}
+
+static ssize_t show_fan_min(struct device *dev, struct device_attribute
+			    *devattr, char *buf)
+{
+	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+	struct pc87427_data *data = pc87427_update_device(dev);
+	int nr = attr->index;
+
+	return sprintf(buf, "%lu\n", fan_from_reg(data->fan_min[nr]));
+}
+
+static ssize_t show_fan_alarm(struct device *dev, struct device_attribute
+			      *devattr, char *buf)
+{
+	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+	struct pc87427_data *data = pc87427_update_device(dev);
+	int nr = attr->index;
+
+	return sprintf(buf, "%d\n", !!(data->fan_status[nr]
+				       & FAN_STATUS_LOSPD));
+}
+
+static ssize_t show_fan_fault(struct device *dev, struct device_attribute
+			      *devattr, char *buf)
+{
+	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+	struct pc87427_data *data = pc87427_update_device(dev);
+	int nr = attr->index;
+
+	return sprintf(buf, "%d\n", !!(data->fan_status[nr]
+				       & FAN_STATUS_STALL));
+}
+
+static ssize_t set_fan_min(struct device *dev, struct device_attribute
+			   *devattr, const char *buf, size_t count)
+{
+	struct pc87427_data *data = dev_get_drvdata(dev);
+	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+	int nr = attr->index;
+	unsigned long val = simple_strtoul(buf, NULL, 10);
+	int iobase = data->address[LD_FAN];
+
+	mutex_lock(&data->lock);
+	outb(BANK_FM(nr), iobase + PC87427_REG_BANK);
+	/* The low speed limit registers are read-only while monitoring
+	   is enabled, so we have to disable monitoring, then change the
+	   limit, and finally enable monitoring again. */
+	outb(0, iobase + PC87427_REG_FAN_STATUS);
+	data->fan_min[nr] = fan_to_reg(val);
+	outw(data->fan_min[nr], iobase + PC87427_REG_FAN_MIN);
+	outb(FAN_STATUS_MONEN, iobase + PC87427_REG_FAN_STATUS);
+	mutex_unlock(&data->lock);
+
+	return count;
+}
+
+static SENSOR_DEVICE_ATTR(fan1_input, S_IRUGO, show_fan_input, NULL, 0);
+static SENSOR_DEVICE_ATTR(fan2_input, S_IRUGO, show_fan_input, NULL, 1);
+static SENSOR_DEVICE_ATTR(fan3_input, S_IRUGO, show_fan_input, NULL, 2);
+static SENSOR_DEVICE_ATTR(fan4_input, S_IRUGO, show_fan_input, NULL, 3);
+static SENSOR_DEVICE_ATTR(fan5_input, S_IRUGO, show_fan_input, NULL, 4);
+static SENSOR_DEVICE_ATTR(fan6_input, S_IRUGO, show_fan_input, NULL, 5);
+static SENSOR_DEVICE_ATTR(fan7_input, S_IRUGO, show_fan_input, NULL, 6);
+static SENSOR_DEVICE_ATTR(fan8_input, S_IRUGO, show_fan_input, NULL, 7);
+
+static SENSOR_DEVICE_ATTR(fan1_min, S_IWUSR | S_IRUGO,
+			  show_fan_min, set_fan_min, 0);
+static SENSOR_DEVICE_ATTR(fan2_min, S_IWUSR | S_IRUGO,
+			  show_fan_min, set_fan_min, 1);
+static SENSOR_DEVICE_ATTR(fan3_min, S_IWUSR | S_IRUGO,
+			  show_fan_min, set_fan_min, 2);
+static SENSOR_DEVICE_ATTR(fan4_min, S_IWUSR | S_IRUGO,
+			  show_fan_min, set_fan_min, 3);
+static SENSOR_DEVICE_ATTR(fan5_min, S_IWUSR | S_IRUGO,
+			  show_fan_min, set_fan_min, 4);
+static SENSOR_DEVICE_ATTR(fan6_min, S_IWUSR | S_IRUGO,
+			  show_fan_min, set_fan_min, 5);
+static SENSOR_DEVICE_ATTR(fan7_min, S_IWUSR | S_IRUGO,
+			  show_fan_min, set_fan_min, 6);
+static SENSOR_DEVICE_ATTR(fan8_min, S_IWUSR | S_IRUGO,
+			  show_fan_min, set_fan_min, 7);
+
+static SENSOR_DEVICE_ATTR(fan1_alarm, S_IRUGO, show_fan_alarm, NULL, 0);
+static SENSOR_DEVICE_ATTR(fan2_alarm, S_IRUGO, show_fan_alarm, NULL, 1);
+static SENSOR_DEVICE_ATTR(fan3_alarm, S_IRUGO, show_fan_alarm, NULL, 2);
+static SENSOR_DEVICE_ATTR(fan4_alarm, S_IRUGO, show_fan_alarm, NULL, 3);
+static SENSOR_DEVICE_ATTR(fan5_alarm, S_IRUGO, show_fan_alarm, NULL, 4);
+static SENSOR_DEVICE_ATTR(fan6_alarm, S_IRUGO, show_fan_alarm, NULL, 5);
+static SENSOR_DEVICE_ATTR(fan7_alarm, S_IRUGO, show_fan_alarm, NULL, 6);
+static SENSOR_DEVICE_ATTR(fan8_alarm, S_IRUGO, show_fan_alarm, NULL, 7);
+
+static SENSOR_DEVICE_ATTR(fan1_fault, S_IRUGO, show_fan_fault, NULL, 0);
+static SENSOR_DEVICE_ATTR(fan2_fault, S_IRUGO, show_fan_fault, NULL, 1);
+static SENSOR_DEVICE_ATTR(fan3_fault, S_IRUGO, show_fan_fault, NULL, 2);
+static SENSOR_DEVICE_ATTR(fan4_fault, S_IRUGO, show_fan_fault, NULL, 3);
+static SENSOR_DEVICE_ATTR(fan5_fault, S_IRUGO, show_fan_fault, NULL, 4);
+static SENSOR_DEVICE_ATTR(fan6_fault, S_IRUGO, show_fan_fault, NULL, 5);
+static SENSOR_DEVICE_ATTR(fan7_fault, S_IRUGO, show_fan_fault, NULL, 6);
+static SENSOR_DEVICE_ATTR(fan8_fault, S_IRUGO, show_fan_fault, NULL, 7);
+
+static struct attribute *pc87427_attributes_fan[8][5] = {
+	{
+		&sensor_dev_attr_fan1_input.dev_attr.attr,
+		&sensor_dev_attr_fan1_min.dev_attr.attr,
+		&sensor_dev_attr_fan1_alarm.dev_attr.attr,
+		&sensor_dev_attr_fan1_fault.dev_attr.attr,
+		NULL
+	}, {
+		&sensor_dev_attr_fan2_input.dev_attr.attr,
+		&sensor_dev_attr_fan2_min.dev_attr.attr,
+		&sensor_dev_attr_fan2_alarm.dev_attr.attr,
+		&sensor_dev_attr_fan2_fault.dev_attr.attr,
+		NULL
+	}, {
+		&sensor_dev_attr_fan3_input.dev_attr.attr,
+		&sensor_dev_attr_fan3_min.dev_attr.attr,
+		&sensor_dev_attr_fan3_alarm.dev_attr.attr,
+		&sensor_dev_attr_fan3_fault.dev_attr.attr,
+		NULL
+	}, {
+		&sensor_dev_attr_fan4_input.dev_attr.attr,
+		&sensor_dev_attr_fan4_min.dev_attr.attr,
+		&sensor_dev_attr_fan4_alarm.dev_attr.attr,
+		&sensor_dev_attr_fan4_fault.dev_attr.attr,
+		NULL
+	}, {
+		&sensor_dev_attr_fan5_input.dev_attr.attr,
+		&sensor_dev_attr_fan5_min.dev_attr.attr,
+		&sensor_dev_attr_fan5_alarm.dev_attr.attr,
+		&sensor_dev_attr_fan5_fault.dev_attr.attr,
+		NULL
+	}, {
+		&sensor_dev_attr_fan6_input.dev_attr.attr,
+		&sensor_dev_attr_fan6_min.dev_attr.attr,
+		&sensor_dev_attr_fan6_alarm.dev_attr.attr,
+		&sensor_dev_attr_fan6_fault.dev_attr.attr,
+		NULL
+	}, {
+		&sensor_dev_attr_fan7_input.dev_attr.attr,
+		&sensor_dev_attr_fan7_min.dev_attr.attr,
+		&sensor_dev_attr_fan7_alarm.dev_attr.attr,
+		&sensor_dev_attr_fan7_fault.dev_attr.attr,
+		NULL
+	}, {
+		&sensor_dev_attr_fan8_input.dev_attr.attr,
+		&sensor_dev_attr_fan8_min.dev_attr.attr,
+		&sensor_dev_attr_fan8_alarm.dev_attr.attr,
+		&sensor_dev_attr_fan8_fault.dev_attr.attr,
+		NULL
+	}
+};
+
+static const struct attribute_group pc87427_group_fan[8] = {
+	{ .attrs = pc87427_attributes_fan[0] },
+	{ .attrs = pc87427_attributes_fan[1] },
+	{ .attrs = pc87427_attributes_fan[2] },
+	{ .attrs = pc87427_attributes_fan[3] },
+	{ .attrs = pc87427_attributes_fan[4] },
+	{ .attrs = pc87427_attributes_fan[5] },
+	{ .attrs = pc87427_attributes_fan[6] },
+	{ .attrs = pc87427_attributes_fan[7] },
+};
+
+static ssize_t show_name(struct device *dev, struct device_attribute
+			 *devattr, char *buf)
+{
+	struct pc87427_data *data = dev_get_drvdata(dev);
+
+	return sprintf(buf, "%s\n", data->name);
+}
+static DEVICE_ATTR(name, S_IRUGO, show_name, NULL);
+
+
+/*
+ * Device detection, attach and detach
+ */
+
+static void __devinit pc87427_init_device(struct device *dev)
+{
+	struct pc87427_data *data = dev_get_drvdata(dev);
+	int i;
+	u8 reg;
+
+	/* The FMC module should be ready */
+	reg = pc87427_read8(data, LD_FAN, PC87427_REG_BANK);
+	if (!(reg & 0x80))
+		dev_warn(dev, "FMC module not ready!\n");
+
+	/* Check which fans are enabled */
+	for (i = 0; i < 8; i++) {
+		reg = pc87427_read8_bank(data, LD_FAN, BANK_FM(i),
+					 PC87427_REG_FAN_STATUS);
+		if (reg & FAN_STATUS_MONEN)
+			data->fan_enabled |= (1 << i);
+	}
+
+	if (!data->fan_enabled) {
+		dev_dbg(dev, "Enabling all fan inputs\n");
+		for (i = 0; i < 8; i++)
+			pc87427_write8_bank(data, LD_FAN, BANK_FM(i),
+					    PC87427_REG_FAN_STATUS,
+					    FAN_STATUS_MONEN);
+		data->fan_enabled = 0xff;
+	}
+}
+
+static int __devinit pc87427_probe(struct platform_device *pdev)
+{
+	struct pc87427_data *data;
+	struct resource *res;
+	int i, err;
+
+	if (!(data = kzalloc(sizeof(struct pc87427_data), GFP_KERNEL))) {
+		err = -ENOMEM;
+		printk(KERN_ERR DRVNAME ": Out of memory\n");
+		goto exit;
+	}
+
+	/* This will need to be revisited when we add support for
+	   temperature and voltage monitoring. */
+	res = platform_get_resource(pdev, IORESOURCE_IO, 0);
+	data->address[0] = res->start;
+
+	mutex_init(&data->lock);
+	data->name = "pc87427";
+	platform_set_drvdata(pdev, data);
+	pc87427_init_device(&pdev->dev);
+
+	/* Register sysfs hooks */
+	if ((err = device_create_file(&pdev->dev, &dev_attr_name)))
+		goto exit_kfree;
+	for (i = 0; i < 8; i++) {
+		if (!(data->fan_enabled & (1 << i)))
+			continue;
+		if ((err = sysfs_create_group(&pdev->dev.kobj,
+					      &pc87427_group_fan[i])))
+			goto exit_remove_files;
+	}
+
+	data->class_dev = hwmon_device_register(&pdev->dev);
+	if (IS_ERR(data->class_dev)) {
+		err = PTR_ERR(data->class_dev);
+		dev_err(&pdev->dev, "Class registration failed (%d)\n", err);
+		goto exit_remove_files;
+	}
+
+	return 0;
+
+exit_remove_files:
+	for (i = 0; i < 8; i++) {
+		if (!(data->fan_enabled & (1 << i)))
+			continue;
+		sysfs_remove_group(&pdev->dev.kobj, &pc87427_group_fan[i]);
+	}
+exit_kfree:
+	platform_set_drvdata(pdev, NULL);
+	kfree(data);
+exit:
+	return err;
+}
+
+static int __devexit pc87427_remove(struct platform_device *pdev)
+{
+	struct pc87427_data *data = platform_get_drvdata(pdev);
+	int i;
+
+	platform_set_drvdata(pdev, NULL);
+	hwmon_device_unregister(data->class_dev);
+	device_remove_file(&pdev->dev, &dev_attr_name);
+	for (i = 0; i < 8; i++) {
+		if (!(data->fan_enabled & (1 << i)))
+			continue;
+		sysfs_remove_group(&pdev->dev.kobj, &pc87427_group_fan[i]);
+	}
+	kfree(data);
+
+	return 0;
+}
+
+
+static struct platform_driver pc87427_driver = {
+	.driver = {
+		.owner	= THIS_MODULE,
+		.name	= DRVNAME,
+	},
+	.probe		= pc87427_probe,
+	.remove		= __devexit_p(pc87427_remove),
+};
+
+static int __init pc87427_device_add(unsigned short address)
+{
+	struct resource res = {
+		.start	= address,
+		.end	= address + REGION_LENGTH - 1,
+		.name	= logdev_str[0],
+		.flags	= IORESOURCE_IO,
+	};
+	int err;
+
+	pdev = platform_device_alloc(DRVNAME, address);
+	if (!pdev) {
+		err = -ENOMEM;
+		printk(KERN_ERR DRVNAME ": Device allocation failed\n");
+		goto exit;
+	}
+
+	err = platform_device_add_resources(pdev, &res, 1);
+	if (err) {
+		printk(KERN_ERR DRVNAME ": Device resource addition failed "
+		       "(%d)\n", err);
+		goto exit_device_put;
+	}
+
+	err = platform_device_add(pdev);
+	if (err) {
+		printk(KERN_ERR DRVNAME ": Device addition failed (%d)\n",
+		       err);
+		goto exit_device_put;
+	}
+
+	return 0;
+
+exit_device_put:
+	platform_device_put(pdev);
+exit:
+	return err;
+}
+
+static int __init pc87427_find(int sioaddr, unsigned short *address)
+{
+	u16 val;
+	int i, err = 0;
+
+	/* Identify device */
+	val = superio_inb(sioaddr, SIOREG_DEVID);
+	if (val != 0xf2) {	/* PC87427 */
+		err = -ENODEV;
+		goto exit;
+	}
+
+	for (i = 0; i < 2; i++) {
+		address[i] = 0;
+		/* Select logical device */
+		superio_outb(sioaddr, SIOREG_LDSEL, logdev[i]);
+
+		val = superio_inb(sioaddr, SIOREG_ACT);
+		if (!(val & 0x01)) {
+			printk(KERN_INFO DRVNAME ": Logical device 0x%02x "
+			       "not activated\n", logdev[i]);
+			continue;
+		}
+
+		val = superio_inb(sioaddr, SIOREG_MAP);
+		if (val & 0x01) {
+			printk(KERN_WARNING DRVNAME ": Logical device 0x%02x "
+			       "is memory-mapped, can't use\n", logdev[i]);
+			continue;
+		}
+
+		val = (superio_inb(sioaddr, SIOREG_IOBASE) << 8)
+		    | superio_inb(sioaddr, SIOREG_IOBASE + 1);
+		if (!val) {
+			printk(KERN_INFO DRVNAME ": I/O base address not set "
+			       "for logical device 0x%02x\n", logdev[i]);
+			continue;
+		}
+		address[i] = val;
+	}
+
+exit:
+	superio_exit(sioaddr);
+	return err;
+}
+
+static int __init pc87427_init(void)
+{
+	int err;
+	unsigned short address[2];
+
+	if (pc87427_find(0x2e, address)
+	 && pc87427_find(0x4e, address))
+		return -ENODEV;
+
+	/* For now the driver only handles fans so we only care about the
+	   first address. */
+	if (!address[0])
+		return -ENODEV;
+
+	err = platform_driver_register(&pc87427_driver);
+	if (err)
+		goto exit;
+
+	/* Sets global pdev as a side effect */
+	err = pc87427_device_add(address[0]);
+	if (err)
+		goto exit_driver;
+
+	return 0;
+
+exit_driver:
+	platform_driver_unregister(&pc87427_driver);
+exit:
+	return err;
+}
+
+static void __exit pc87427_exit(void)
+{
+	platform_device_unregister(pdev);
+	platform_driver_unregister(&pc87427_driver);
+}
+
+MODULE_AUTHOR("Jean Delvare <khali@linux-fr.org>");
+MODULE_DESCRIPTION("PC87427 hardware monitoring driver");
+MODULE_LICENSE("GPL");
+
+module_init(pc87427_init);
+module_exit(pc87427_exit);
diff --git a/drivers/hwmon/w83627ehf.c b/drivers/hwmon/w83627ehf.c
index 2257806d0102..212a1558c63b 100644
--- a/drivers/hwmon/w83627ehf.c
+++ b/drivers/hwmon/w83627ehf.c
@@ -3,7 +3,7 @@
                 the Winbond W83627EHF Super-I/O chip
     Copyright (C) 2005  Jean Delvare <khali@linux-fr.org>
     Copyright (C) 2006  Yuan Mu (Winbond),
-                        Rudolf Marek <r.marek@sh.cvut.cz>
+                        Rudolf Marek <r.marek@assembler.cz>
                         David Hubbard <david.c.hubbard@gmail.com>
 
     Shamelessly ripped from the w83627hf driver
diff --git a/drivers/hwmon/w83792d.c b/drivers/hwmon/w83792d.c
index 4e108262576f..b0fa296740d1 100644
--- a/drivers/hwmon/w83792d.c
+++ b/drivers/hwmon/w83792d.c
@@ -3,7 +3,7 @@
                 monitoring
     Copyright (C) 2004, 2005 Winbond Electronics Corp.
                         Chunhao Huang <DZShen@Winbond.com.tw>,
-                        Rudolf Marek <r.marek@sh.cvut.cz>
+                        Rudolf Marek <r.marek@assembler.cz>
 
     This program is free software; you can redistribute it and/or modify
     it under the terms of the GNU General Public License as published by
diff --git a/drivers/hwmon/w83793.c b/drivers/hwmon/w83793.c
new file mode 100644
index 000000000000..c12ac5abc2bb
--- /dev/null
+++ b/drivers/hwmon/w83793.c
@@ -0,0 +1,1609 @@
+/*
+    w83793.c - Linux kernel driver for hardware monitoring
+    Copyright (C) 2006 Winbond Electronics Corp.
+                  Yuan Mu
+                  Rudolf Marek <r.marek@assembler.cz>
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation - version 2.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program; if not, write to the Free Software
+    Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+    02110-1301 USA.
+*/
+
+/*
+    Supports following chips:
+
+    Chip	#vin	#fanin	#pwm	#temp	wchipid	vendid	i2c	ISA
+    w83793	10	12	8	6	0x7b	0x5ca3	yes	no
+*/
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/i2c.h>
+#include <linux/hwmon.h>
+#include <linux/hwmon-vid.h>
+#include <linux/hwmon-sysfs.h>
+#include <linux/err.h>
+#include <linux/mutex.h>
+
+/* Addresses to scan */
+static unsigned short normal_i2c[] = { 0x2c, 0x2d, 0x2e, 0x2f, I2C_CLIENT_END };
+
+/* Insmod parameters */
+I2C_CLIENT_INSMOD_1(w83793);
+I2C_CLIENT_MODULE_PARM(force_subclients, "List of subclient addresses: "
+		       "{bus, clientaddr, subclientaddr1, subclientaddr2}");
+
+static int reset;
+module_param(reset, bool, 0);
+MODULE_PARM_DESC(reset, "Set to 1 to reset chip, not recommended");
+
+/*
+   Address 0x00, 0x0d, 0x0e, 0x0f in all three banks are reserved
+   as ID, Bank Select registers
+*/
+#define W83793_REG_BANKSEL		0x00
+#define W83793_REG_VENDORID		0x0d
+#define W83793_REG_CHIPID		0x0e
+#define W83793_REG_DEVICEID		0x0f
+
+#define W83793_REG_CONFIG		0x40
+#define W83793_REG_MFC			0x58
+#define W83793_REG_FANIN_CTRL		0x5c
+#define W83793_REG_FANIN_SEL		0x5d
+#define W83793_REG_I2C_ADDR		0x0b
+#define W83793_REG_I2C_SUBADDR		0x0c
+#define W83793_REG_VID_INA		0x05
+#define W83793_REG_VID_INB		0x06
+#define W83793_REG_VID_LATCHA		0x07
+#define W83793_REG_VID_LATCHB		0x08
+#define W83793_REG_VID_CTRL		0x59
+
+static u16 W83793_REG_TEMP_MODE[2] = { 0x5e, 0x5f };
+
+#define TEMP_READ	0
+#define TEMP_CRIT	1
+#define TEMP_CRIT_HYST	2
+#define TEMP_WARN	3
+#define TEMP_WARN_HYST	4
+/* only crit and crit_hyst affect real-time alarm status
+   current crit crit_hyst warn warn_hyst */
+static u16 W83793_REG_TEMP[][5] = {
+	{0x1c, 0x78, 0x79, 0x7a, 0x7b},
+	{0x1d, 0x7c, 0x7d, 0x7e, 0x7f},
+	{0x1e, 0x80, 0x81, 0x82, 0x83},
+	{0x1f, 0x84, 0x85, 0x86, 0x87},
+	{0x20, 0x88, 0x89, 0x8a, 0x8b},
+	{0x21, 0x8c, 0x8d, 0x8e, 0x8f},
+};
+
+#define W83793_REG_TEMP_LOW_BITS	0x22
+
+#define W83793_REG_BEEP(index)		(0x53 + (index))
+#define W83793_REG_ALARM(index)		(0x4b + (index))
+
+#define W83793_REG_CLR_CHASSIS		0x4a	/* SMI MASK4 */
+#define W83793_REG_IRQ_CTRL		0x50
+#define W83793_REG_OVT_CTRL		0x51
+#define W83793_REG_OVT_BEEP		0x52
+
+#define IN_READ				0
+#define IN_MAX				1
+#define IN_LOW				2
+static const u16 W83793_REG_IN[][3] = {
+	/* Current, High, Low */
+	{0x10, 0x60, 0x61},	/* Vcore A	*/
+	{0x11, 0x62, 0x63},	/* Vcore B	*/
+	{0x12, 0x64, 0x65},	/* Vtt		*/
+	{0x14, 0x6a, 0x6b},	/* VSEN1	*/
+	{0x15, 0x6c, 0x6d},	/* VSEN2	*/
+	{0x16, 0x6e, 0x6f},	/* +3VSEN	*/
+	{0x17, 0x70, 0x71},	/* +12VSEN	*/
+	{0x18, 0x72, 0x73},	/* 5VDD		*/
+	{0x19, 0x74, 0x75},	/* 5VSB		*/
+	{0x1a, 0x76, 0x77},	/* VBAT		*/
+};
+
+/* Low Bits of Vcore A/B Vtt Read/High/Low */
+static const u16 W83793_REG_IN_LOW_BITS[] = { 0x1b, 0x68, 0x69 };
+static u8 scale_in[] = { 2, 2, 2, 16, 16, 16, 8, 24, 24, 16 };
+
+#define W83793_REG_FAN(index)		(0x23 + 2 * (index))	/* High byte */
+#define W83793_REG_FAN_MIN(index)	(0x90 + 2 * (index))	/* High byte */
+
+#define W83793_REG_PWM_DEFAULT		0xb2
+#define W83793_REG_PWM_ENABLE		0x207
+#define W83793_REG_PWM_UPTIME		0xc3	/* Unit in 0.1 second */
+#define W83793_REG_PWM_DOWNTIME		0xc4	/* Unit in 0.1 second */
+#define W83793_REG_TEMP_CRITICAL	0xc5
+
+#define PWM_DUTY			0
+#define PWM_START			1
+#define PWM_NONSTOP			2
+#define W83793_REG_PWM(index, nr)	(((nr) == 0 ? 0xb3 : \
+					 (nr) == 1 ? 0x220 : 0x218) + (index))
+
+/* bit field, fan1 is bit0, fan2 is bit1 ... */
+#define W83793_REG_TEMP_FAN_MAP(index)	(0x201 + (index))
+#define W83793_REG_TEMP_TOL(index)	(0x208 + (index))
+#define W83793_REG_TEMP_CRUISE(index)	(0x210 + (index))
+#define W83793_REG_PWM_STOP_TIME(index)	(0x228 + (index))
+#define W83793_REG_SF2_TEMP(index, nr)	(0x230 + ((index) << 4) + (nr))
+#define W83793_REG_SF2_PWM(index, nr)	(0x238 + ((index) << 4) + (nr))
+
+static inline unsigned long FAN_FROM_REG(u16 val)
+{
+	if ((val >= 0xfff) || (val == 0))
+		return	0;
+	return (1350000UL / val);
+}
+
+static inline u16 FAN_TO_REG(long rpm)
+{
+	if (rpm <= 0)
+		return 0x0fff;
+	return SENSORS_LIMIT((1350000 + (rpm >> 1)) / rpm, 1, 0xffe);
+}
+
+static inline unsigned long TIME_FROM_REG(u8 reg)
+{
+	return (reg * 100);
+}
+
+static inline u8 TIME_TO_REG(unsigned long val)
+{
+	return SENSORS_LIMIT((val + 50) / 100, 0, 0xff);
+}
+
+static inline long TEMP_FROM_REG(s8 reg)
+{
+	return (reg * 1000);
+}
+
+static inline s8 TEMP_TO_REG(long val, s8 min, s8 max)
+{
+	return SENSORS_LIMIT((val + (val < 0 ? -500 : 500)) / 1000, min, max);
+}
+
+struct w83793_data {
+	struct i2c_client client;
+	struct i2c_client *lm75[2];
+	struct class_device *class_dev;
+	struct mutex update_lock;
+	char valid;			/* !=0 if following fields are valid */
+	unsigned long last_updated;	/* In jiffies */
+	unsigned long last_nonvolatile;	/* In jiffies, last time we update the
+					   nonvolatile registers */
+
+	u8 bank;
+	u8 vrm;
+	u8 vid[2];
+	u8 in[10][3];		/* Register value, read/high/low */
+	u8 in_low_bits[3];	/* Additional resolution for VCore A/B Vtt */
+
+	u16 has_fan;		/* Only fan1- fan5 has own pins */
+	u16 fan[12];		/* Register value combine */
+	u16 fan_min[12];	/* Register value combine */
+
+	s8 temp[6][5];		/* current, crit, crit_hyst,warn, warn_hyst */
+	u8 temp_low_bits;	/* Additional resolution TD1-TD4 */
+	u8 temp_mode[2];	/* byte 0: Temp D1-D4 mode each has 2 bits
+				   byte 1: Temp R1,R2 mode, each has 1 bit */
+	u8 temp_critical;	/* If reached all fan will be at full speed */
+	u8 temp_fan_map[6];	/* Temp controls which pwm fan, bit field */
+
+	u8 has_pwm;
+	u8 pwm_enable;		/* Register value, each Temp has 1 bit */
+	u8 pwm_uptime;		/* Register value */
+	u8 pwm_downtime;	/* Register value */
+	u8 pwm_default;		/* All fan default pwm, next poweron valid */
+	u8 pwm[8][3];		/* Register value */
+	u8 pwm_stop_time[8];
+	u8 temp_cruise[6];
+
+	u8 alarms[5];		/* realtime status registers */
+	u8 beeps[5];
+	u8 beep_enable;
+	u8 tolerance[3];	/* Temp tolerance(Smart Fan I/II) */
+	u8 sf2_pwm[6][7];	/* Smart FanII: Fan duty cycle */
+	u8 sf2_temp[6][7];	/* Smart FanII: Temp level point */
+};
+
+static u8 w83793_read_value(struct i2c_client *client, u16 reg);
+static int w83793_write_value(struct i2c_client *client, u16 reg, u8 value);
+static int w83793_attach_adapter(struct i2c_adapter *adapter);
+static int w83793_detect(struct i2c_adapter *adapter, int address, int kind);
+static int w83793_detach_client(struct i2c_client *client);
+static void w83793_init_client(struct i2c_client *client);
+static void w83793_update_nonvolatile(struct device *dev);
+static struct w83793_data *w83793_update_device(struct device *dev);
+
+static struct i2c_driver w83793_driver = {
+	.driver = {
+		   .name = "w83793",
+	},
+	.attach_adapter = w83793_attach_adapter,
+	.detach_client = w83793_detach_client,
+};
+
+static ssize_t
+show_vrm(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct w83793_data *data = i2c_get_clientdata(client);
+
+	return sprintf(buf, "%d\n", data->vrm);
+}
+
+static ssize_t
+show_vid(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct w83793_data *data = w83793_update_device(dev);
+	struct sensor_device_attribute_2 *sensor_attr =
+	    to_sensor_dev_attr_2(attr);
+	int index = sensor_attr->index;
+
+	return sprintf(buf, "%d\n", vid_from_reg(data->vid[index], data->vrm));
+}
+
+static ssize_t
+store_vrm(struct device *dev, struct device_attribute *attr,
+	  const char *buf, size_t count)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct w83793_data *data = i2c_get_clientdata(client);
+
+	data->vrm = simple_strtoul(buf, NULL, 10);
+	return count;
+}
+
+#define ALARM_STATUS			0
+#define BEEP_ENABLE			1
+static ssize_t
+show_alarm_beep(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct w83793_data *data = w83793_update_device(dev);
+	struct sensor_device_attribute_2 *sensor_attr =
+	    to_sensor_dev_attr_2(attr);
+	int nr = sensor_attr->nr;
+	int index = sensor_attr->index >> 3;
+	int bit = sensor_attr->index & 0x07;
+	u8 val;
+
+	if (ALARM_STATUS == nr) {
+		val = (data->alarms[index] >> (bit)) & 1;
+	} else {		/* BEEP_ENABLE */
+		val = (data->beeps[index] >> (bit)) & 1;
+	}
+
+	return sprintf(buf, "%u\n", val);
+}
+
+static ssize_t
+store_beep(struct device *dev, struct device_attribute *attr,
+	   const char *buf, size_t count)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct w83793_data *data = i2c_get_clientdata(client);
+	struct sensor_device_attribute_2 *sensor_attr =
+	    to_sensor_dev_attr_2(attr);
+	int index = sensor_attr->index >> 3;
+	int shift = sensor_attr->index & 0x07;
+	u8 beep_bit = 1 << shift;
+	u8 val;
+
+	val = simple_strtoul(buf, NULL, 10);
+	if (val != 0 && val != 1)
+		return -EINVAL;
+
+	mutex_lock(&data->update_lock);
+	data->beeps[index] = w83793_read_value(client, W83793_REG_BEEP(index));
+	data->beeps[index] &= ~beep_bit;
+	data->beeps[index] |= val << shift;
+	w83793_write_value(client, W83793_REG_BEEP(index), data->beeps[index]);
+	mutex_unlock(&data->update_lock);
+
+	return count;
+}
+
+static ssize_t
+show_beep_enable(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct w83793_data *data = w83793_update_device(dev);
+	return sprintf(buf, "%u\n", (data->beep_enable >> 1) & 0x01);
+}
+
+static ssize_t
+store_beep_enable(struct device *dev, struct device_attribute *attr,
+		  const char *buf, size_t count)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct w83793_data *data = i2c_get_clientdata(client);
+	u8 val = simple_strtoul(buf, NULL, 10);
+
+	if (val != 0 && val != 1)
+		return -EINVAL;
+
+	mutex_lock(&data->update_lock);
+	data->beep_enable = w83793_read_value(client, W83793_REG_OVT_BEEP)
+			    & 0xfd;
+	data->beep_enable |= val << 1;
+	w83793_write_value(client, W83793_REG_OVT_BEEP, data->beep_enable);
+	mutex_unlock(&data->update_lock);
+
+	return count;
+}
+
+/* Write any value to clear chassis alarm */
+static ssize_t
+store_chassis_clear(struct device *dev,
+		    struct device_attribute *attr, const char *buf,
+		    size_t count)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct w83793_data *data = i2c_get_clientdata(client);
+	u8 val;
+
+	mutex_lock(&data->update_lock);
+	val = w83793_read_value(client, W83793_REG_CLR_CHASSIS);
+	val |= 0x80;
+	w83793_write_value(client, W83793_REG_CLR_CHASSIS, val);
+	mutex_unlock(&data->update_lock);
+	return count;
+}
+
+#define FAN_INPUT			0
+#define FAN_MIN				1
+static ssize_t
+show_fan(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct sensor_device_attribute_2 *sensor_attr =
+	    to_sensor_dev_attr_2(attr);
+	int nr = sensor_attr->nr;
+	int index = sensor_attr->index;
+	struct w83793_data *data = w83793_update_device(dev);
+	u16 val;
+
+	if (FAN_INPUT == nr) {
+		val = data->fan[index] & 0x0fff;
+	} else {
+		val = data->fan_min[index] & 0x0fff;
+	}
+
+	return sprintf(buf, "%lu\n", FAN_FROM_REG(val));
+}
+
+static ssize_t
+store_fan_min(struct device *dev, struct device_attribute *attr,
+	      const char *buf, size_t count)
+{
+	struct sensor_device_attribute_2 *sensor_attr =
+	    to_sensor_dev_attr_2(attr);
+	int index = sensor_attr->index;
+	struct i2c_client *client = to_i2c_client(dev);
+	struct w83793_data *data = i2c_get_clientdata(client);
+	u16 val = FAN_TO_REG(simple_strtoul(buf, NULL, 10));
+
+	mutex_lock(&data->update_lock);
+	data->fan_min[index] = val;
+	w83793_write_value(client, W83793_REG_FAN_MIN(index),
+			   (val >> 8) & 0xff);
+	w83793_write_value(client, W83793_REG_FAN_MIN(index) + 1, val & 0xff);
+	mutex_unlock(&data->update_lock);
+
+	return count;
+}
+
+#define PWM_DUTY			0
+#define PWM_START			1
+#define PWM_NONSTOP			2
+#define PWM_STOP_TIME			3
+static ssize_t
+show_pwm(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct sensor_device_attribute_2 *sensor_attr =
+	    to_sensor_dev_attr_2(attr);
+	struct w83793_data *data = w83793_update_device(dev);
+	u16 val;
+	int nr = sensor_attr->nr;
+	int index = sensor_attr->index;
+
+	if (PWM_STOP_TIME == nr)
+		val = TIME_FROM_REG(data->pwm_stop_time[index]);
+	else
+		val = (data->pwm[index][nr] & 0x3f) << 2;
+
+	return sprintf(buf, "%d\n", val);
+}
+
+static ssize_t
+store_pwm(struct device *dev, struct device_attribute *attr,
+	  const char *buf, size_t count)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct w83793_data *data = i2c_get_clientdata(client);
+	struct sensor_device_attribute_2 *sensor_attr =
+	    to_sensor_dev_attr_2(attr);
+	int nr = sensor_attr->nr;
+	int index = sensor_attr->index;
+	u8 val;
+
+	mutex_lock(&data->update_lock);
+	if (PWM_STOP_TIME == nr) {
+		val = TIME_TO_REG(simple_strtoul(buf, NULL, 10));
+		data->pwm_stop_time[index] = val;
+		w83793_write_value(client, W83793_REG_PWM_STOP_TIME(index),
+				   val);
+	} else {
+		val = SENSORS_LIMIT(simple_strtoul(buf, NULL, 10), 0, 0xff)
+		      >> 2;
+		data->pwm[index][nr] =
+		    w83793_read_value(client, W83793_REG_PWM(index, nr)) & 0xc0;
+		data->pwm[index][nr] |= val;
+		w83793_write_value(client, W83793_REG_PWM(index, nr),
+							data->pwm[index][nr]);
+	}
+
+	mutex_unlock(&data->update_lock);
+	return count;
+}
+
+static ssize_t
+show_temp(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct sensor_device_attribute_2 *sensor_attr =
+	    to_sensor_dev_attr_2(attr);
+	int nr = sensor_attr->nr;
+	int index = sensor_attr->index;
+	struct w83793_data *data = w83793_update_device(dev);
+	long temp = TEMP_FROM_REG(data->temp[index][nr]);
+
+	if (TEMP_READ == nr && index < 4) {	/* Only TD1-TD4 have low bits */
+		int low = ((data->temp_low_bits >> (index * 2)) & 0x03) * 250;
+		temp += temp > 0 ? low : -low;
+	}
+	return sprintf(buf, "%ld\n", temp);
+}
+
+static ssize_t
+store_temp(struct device *dev, struct device_attribute *attr,
+	   const char *buf, size_t count)
+{
+	struct sensor_device_attribute_2 *sensor_attr =
+	    to_sensor_dev_attr_2(attr);
+	int nr = sensor_attr->nr;
+	int index = sensor_attr->index;
+	struct i2c_client *client = to_i2c_client(dev);
+	struct w83793_data *data = i2c_get_clientdata(client);
+	long tmp = simple_strtol(buf, NULL, 10);
+
+	mutex_lock(&data->update_lock);
+	data->temp[index][nr] = TEMP_TO_REG(tmp, -128, 127);
+	w83793_write_value(client, W83793_REG_TEMP[index][nr],
+			   data->temp[index][nr]);
+	mutex_unlock(&data->update_lock);
+	return count;
+}
+
+/*
+	TD1-TD4
+	each has 4 mode:(2 bits)
+	0:	Stop monitor
+	1:	Use internal temp sensor(default)
+	2:	Use sensor in AMD CPU and get result by AMDSI
+	3:	Use sensor in Intel CPU and get result by PECI
+
+	TR1-TR2
+	each has 2 mode:(1 bit)
+	0:	Disable temp sensor monitor
+	1:	To enable temp sensors monitor
+*/
+
+/* 0 disable, 5 AMDSI, 6 PECI */
+static u8 TO_TEMP_MODE[] = { 0, 0, 5, 6 };
+
+static ssize_t
+show_temp_mode(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct w83793_data *data = w83793_update_device(dev);
+	struct sensor_device_attribute_2 *sensor_attr =
+	    to_sensor_dev_attr_2(attr);
+	int index = sensor_attr->index;
+	u8 mask = (index < 4) ? 0x03 : 0x01;
+	u8 shift = (index < 4) ? (2 * index) : (index - 4);
+	u8 tmp;
+	index = (index < 4) ? 0 : 1;
+
+	tmp = (data->temp_mode[index] >> shift) & mask;
+
+	/* for the internal sensor, found out if diode or thermistor */
+	if (tmp == 1) {
+		tmp = index == 0 ? 3 : 4;
+	} else {
+		tmp = TO_TEMP_MODE[tmp];
+	}
+
+	return sprintf(buf, "%d\n", tmp);
+}
+
+static ssize_t
+store_temp_mode(struct device *dev, struct device_attribute *attr,
+		const char *buf, size_t count)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct w83793_data *data = i2c_get_clientdata(client);
+	struct sensor_device_attribute_2 *sensor_attr =
+	    to_sensor_dev_attr_2(attr);
+	int index = sensor_attr->index;
+	u8 mask = (index < 4) ? 0x03 : 0x01;
+	u8 shift = (index < 4) ? (2 * index) : (index - 4);
+	u8 val = simple_strtoul(buf, NULL, 10);
+
+	/* transform the sysfs interface values into table above */
+	if ((val == 5 || val == 6) && (index < 4)) {
+		val -= 3;
+	} else if ((val == 3 && index < 4)
+		|| (val == 4 && index >= 4)
+		|| val == 0) {
+		/* transform diode or thermistor into internal enable */
+		val = !!val;
+	} else {
+		return -EINVAL;
+	}
+
+	index = (index < 4) ? 0 : 1;
+	mutex_lock(&data->update_lock);
+	data->temp_mode[index] =
+	    w83793_read_value(client, W83793_REG_TEMP_MODE[index]);
+	data->temp_mode[index] &= ~(mask << shift);
+	data->temp_mode[index] |= val << shift;
+	w83793_write_value(client, W83793_REG_TEMP_MODE[index],
+							data->temp_mode[index]);
+	mutex_unlock(&data->update_lock);
+
+	return count;
+}
+
+#define SETUP_PWM_DEFAULT		0
+#define SETUP_PWM_UPTIME		1	/* Unit in 0.1s */
+#define SETUP_PWM_DOWNTIME		2	/* Unit in 0.1s */
+#define SETUP_TEMP_CRITICAL		3
+static ssize_t
+show_sf_setup(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct sensor_device_attribute_2 *sensor_attr =
+	    to_sensor_dev_attr_2(attr);
+	int nr = sensor_attr->nr;
+	struct w83793_data *data = w83793_update_device(dev);
+	u32 val = 0;
+
+	if (SETUP_PWM_DEFAULT == nr) {
+		val = (data->pwm_default & 0x3f) << 2;
+	} else if (SETUP_PWM_UPTIME == nr) {
+		val = TIME_FROM_REG(data->pwm_uptime);
+	} else if (SETUP_PWM_DOWNTIME == nr) {
+		val = TIME_FROM_REG(data->pwm_downtime);
+	} else if (SETUP_TEMP_CRITICAL == nr) {
+		val = TEMP_FROM_REG(data->temp_critical & 0x7f);
+	}
+
+	return sprintf(buf, "%d\n", val);
+}
+
+static ssize_t
+store_sf_setup(struct device *dev, struct device_attribute *attr,
+	       const char *buf, size_t count)
+{
+	struct sensor_device_attribute_2 *sensor_attr =
+	    to_sensor_dev_attr_2(attr);
+	int nr = sensor_attr->nr;
+	struct i2c_client *client = to_i2c_client(dev);
+	struct w83793_data *data = i2c_get_clientdata(client);
+
+	mutex_lock(&data->update_lock);
+	if (SETUP_PWM_DEFAULT == nr) {
+		data->pwm_default =
+		    w83793_read_value(client, W83793_REG_PWM_DEFAULT) & 0xc0;
+		data->pwm_default |= SENSORS_LIMIT(simple_strtoul(buf, NULL,
+								  10),
+						   0, 0xff) >> 2;
+		w83793_write_value(client, W83793_REG_PWM_DEFAULT,
+							data->pwm_default);
+	} else if (SETUP_PWM_UPTIME == nr) {
+		data->pwm_uptime = TIME_TO_REG(simple_strtoul(buf, NULL, 10));
+		data->pwm_uptime += data->pwm_uptime == 0 ? 1 : 0;
+		w83793_write_value(client, W83793_REG_PWM_UPTIME,
+							data->pwm_uptime);
+	} else if (SETUP_PWM_DOWNTIME == nr) {
+		data->pwm_downtime = TIME_TO_REG(simple_strtoul(buf, NULL, 10));
+		data->pwm_downtime += data->pwm_downtime == 0 ? 1 : 0;
+		w83793_write_value(client, W83793_REG_PWM_DOWNTIME,
+							data->pwm_downtime);
+	} else {		/* SETUP_TEMP_CRITICAL */
+		data->temp_critical =
+		    w83793_read_value(client, W83793_REG_TEMP_CRITICAL) & 0x80;
+		data->temp_critical |= TEMP_TO_REG(simple_strtol(buf, NULL, 10),
+						   0, 0x7f);
+		w83793_write_value(client, W83793_REG_TEMP_CRITICAL,
+							data->temp_critical);
+	}
+
+	mutex_unlock(&data->update_lock);
+	return count;
+}
+
+/*
+	Temp SmartFan control
+	TEMP_FAN_MAP
+	Temp channel control which pwm fan, bitfield, bit 0 indicate pwm1...
+	It's possible two or more temp channels control the same fan, w83793
+	always prefers to pick the most critical request and applies it to
+	the related Fan.
+	It's possible one fan is not in any mapping of 6 temp channels, this
+	means the fan is manual mode
+
+	TEMP_PWM_ENABLE
+	Each temp channel has its own SmartFan mode, and temp channel
+	control	fans that are set by TEMP_FAN_MAP
+	0:	SmartFanII mode
+	1:	Thermal Cruise Mode
+
+	TEMP_CRUISE
+	Target temperature in thermal cruise mode, w83793 will try to turn
+	fan speed to keep the temperature of target device around this
+	temperature.
+
+	TEMP_TOLERANCE
+	If Temp higher or lower than target with this tolerance, w83793
+	will take actions to speed up or slow down the fan to keep the
+	temperature within the tolerance range.
+*/
+
+#define TEMP_FAN_MAP			0
+#define TEMP_PWM_ENABLE			1
+#define TEMP_CRUISE			2
+#define TEMP_TOLERANCE			3
+static ssize_t
+show_sf_ctrl(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct sensor_device_attribute_2 *sensor_attr =
+	    to_sensor_dev_attr_2(attr);
+	int nr = sensor_attr->nr;
+	int index = sensor_attr->index;
+	struct w83793_data *data = w83793_update_device(dev);
+	u32 val;
+
+	if (TEMP_FAN_MAP == nr) {
+		val = data->temp_fan_map[index];
+	} else if (TEMP_PWM_ENABLE == nr) {
+		/* +2 to transfrom into 2 and 3 to conform with sysfs intf */
+		val = ((data->pwm_enable >> index) & 0x01) + 2;
+	} else if (TEMP_CRUISE == nr) {
+		val = TEMP_FROM_REG(data->temp_cruise[index] & 0x7f);
+	} else {		/* TEMP_TOLERANCE */
+		val = data->tolerance[index >> 1] >> ((index & 0x01) ? 4 : 0);
+		val = TEMP_FROM_REG(val & 0x0f);
+	}
+	return sprintf(buf, "%d\n", val);
+}
+
+static ssize_t
+store_sf_ctrl(struct device *dev, struct device_attribute *attr,
+	      const char *buf, size_t count)
+{
+	struct sensor_device_attribute_2 *sensor_attr =
+	    to_sensor_dev_attr_2(attr);
+	int nr = sensor_attr->nr;
+	int index = sensor_attr->index;
+	struct i2c_client *client = to_i2c_client(dev);
+	struct w83793_data *data = i2c_get_clientdata(client);
+	u32 val;
+
+	mutex_lock(&data->update_lock);
+	if (TEMP_FAN_MAP == nr) {
+		val = simple_strtoul(buf, NULL, 10) & 0xff;
+		w83793_write_value(client, W83793_REG_TEMP_FAN_MAP(index), val);
+		data->temp_fan_map[index] = val;
+	} else if (TEMP_PWM_ENABLE == nr) {
+		val = simple_strtoul(buf, NULL, 10);
+		if (2 == val || 3 == val) {
+			data->pwm_enable =
+			    w83793_read_value(client, W83793_REG_PWM_ENABLE);
+			if (val - 2)
+				data->pwm_enable |= 1 << index;
+			else
+				data->pwm_enable &= ~(1 << index);
+			w83793_write_value(client, W83793_REG_PWM_ENABLE,
+							data->pwm_enable);
+		} else {
+			mutex_unlock(&data->update_lock);
+			return -EINVAL;
+		}
+	} else if (TEMP_CRUISE == nr) {
+		data->temp_cruise[index] =
+		    w83793_read_value(client, W83793_REG_TEMP_CRUISE(index));
+		val = TEMP_TO_REG(simple_strtol(buf, NULL, 10), 0, 0x7f);
+		data->temp_cruise[index] &= 0x80;
+		data->temp_cruise[index] |= val;
+
+		w83793_write_value(client, W83793_REG_TEMP_CRUISE(index),
+						data->temp_cruise[index]);
+	} else {		/* TEMP_TOLERANCE */
+		int i = index >> 1;
+		u8 shift = (index & 0x01) ? 4 : 0;
+		data->tolerance[i] =
+		    w83793_read_value(client, W83793_REG_TEMP_TOL(i));
+
+		val = TEMP_TO_REG(simple_strtol(buf, NULL, 10), 0, 0x0f);
+		data->tolerance[i] &= ~(0x0f << shift);
+		data->tolerance[i] |= val << shift;
+		w83793_write_value(client, W83793_REG_TEMP_TOL(i),
+							data->tolerance[i]);
+	}
+
+	mutex_unlock(&data->update_lock);
+	return count;
+}
+
+static ssize_t
+show_sf2_pwm(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct sensor_device_attribute_2 *sensor_attr =
+	    to_sensor_dev_attr_2(attr);
+	int nr = sensor_attr->nr;
+	int index = sensor_attr->index;
+	struct w83793_data *data = w83793_update_device(dev);
+
+	return sprintf(buf, "%d\n", (data->sf2_pwm[index][nr] & 0x3f) << 2);
+}
+
+static ssize_t
+store_sf2_pwm(struct device *dev, struct device_attribute *attr,
+	      const char *buf, size_t count)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct w83793_data *data = i2c_get_clientdata(client);
+	struct sensor_device_attribute_2 *sensor_attr =
+	    to_sensor_dev_attr_2(attr);
+	int nr = sensor_attr->nr;
+	int index = sensor_attr->index;
+	u8 val = SENSORS_LIMIT(simple_strtoul(buf, NULL, 10), 0, 0xff) >> 2;
+
+	mutex_lock(&data->update_lock);
+	data->sf2_pwm[index][nr] =
+	    w83793_read_value(client, W83793_REG_SF2_PWM(index, nr)) & 0xc0;
+	data->sf2_pwm[index][nr] |= val;
+	w83793_write_value(client, W83793_REG_SF2_PWM(index, nr),
+						data->sf2_pwm[index][nr]);
+	mutex_unlock(&data->update_lock);
+	return count;
+}
+
+static ssize_t
+show_sf2_temp(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct sensor_device_attribute_2 *sensor_attr =
+	    to_sensor_dev_attr_2(attr);
+	int nr = sensor_attr->nr;
+	int index = sensor_attr->index;
+	struct w83793_data *data = w83793_update_device(dev);
+
+	return sprintf(buf, "%ld\n",
+		       TEMP_FROM_REG(data->sf2_temp[index][nr] & 0x7f));
+}
+
+static ssize_t
+store_sf2_temp(struct device *dev, struct device_attribute *attr,
+	       const char *buf, size_t count)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct w83793_data *data = i2c_get_clientdata(client);
+	struct sensor_device_attribute_2 *sensor_attr =
+	    to_sensor_dev_attr_2(attr);
+	int nr = sensor_attr->nr;
+	int index = sensor_attr->index;
+	u8 val = TEMP_TO_REG(simple_strtol(buf, NULL, 10), 0, 0x7f);
+
+	mutex_lock(&data->update_lock);
+	data->sf2_temp[index][nr] =
+	    w83793_read_value(client, W83793_REG_SF2_TEMP(index, nr)) & 0x80;
+	data->sf2_temp[index][nr] |= val;
+	w83793_write_value(client, W83793_REG_SF2_TEMP(index, nr),
+					     data->sf2_temp[index][nr]);
+	mutex_unlock(&data->update_lock);
+	return count;
+}
+
+/* only Vcore A/B and Vtt have additional 2 bits precision */
+static ssize_t
+show_in(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct sensor_device_attribute_2 *sensor_attr =
+	    to_sensor_dev_attr_2(attr);
+	int nr = sensor_attr->nr;
+	int index = sensor_attr->index;
+	struct w83793_data *data = w83793_update_device(dev);
+	u16 val = data->in[index][nr];
+
+	if (index < 3) {
+		val <<= 2;
+		val += (data->in_low_bits[nr] >> (index * 2)) & 0x3;
+	}
+	return sprintf(buf, "%d\n", val * scale_in[index]);
+}
+
+static ssize_t
+store_in(struct device *dev, struct device_attribute *attr,
+	 const char *buf, size_t count)
+{
+	struct sensor_device_attribute_2 *sensor_attr =
+	    to_sensor_dev_attr_2(attr);
+	int nr = sensor_attr->nr;
+	int index = sensor_attr->index;
+	struct i2c_client *client = to_i2c_client(dev);
+	struct w83793_data *data = i2c_get_clientdata(client);
+	u32 val;
+
+	val =
+	    (simple_strtoul(buf, NULL, 10) +
+	     scale_in[index] / 2) / scale_in[index];
+	mutex_lock(&data->update_lock);
+	if (index > 2) {
+		val = SENSORS_LIMIT(val, 0, 255);
+	} else {
+		val = SENSORS_LIMIT(val, 0, 0x3FF);
+		data->in_low_bits[nr] =
+		    w83793_read_value(client, W83793_REG_IN_LOW_BITS[nr]);
+		data->in_low_bits[nr] &= ~(0x03 << (2 * index));
+		data->in_low_bits[nr] |= (val & 0x03) << (2 * index);
+		w83793_write_value(client, W83793_REG_IN_LOW_BITS[nr],
+						     data->in_low_bits[nr]);
+		val >>= 2;
+	}
+	data->in[index][nr] = val;
+	w83793_write_value(client, W83793_REG_IN[index][nr],
+							data->in[index][nr]);
+	mutex_unlock(&data->update_lock);
+	return count;
+}
+
+#define NOT_USED			-1
+
+#define SENSOR_ATTR_IN(index)						\
+	SENSOR_ATTR_2(in##index##_input, S_IRUGO, show_in, NULL,	\
+		IN_READ, index),					\
+	SENSOR_ATTR_2(in##index##_max, S_IRUGO | S_IWUSR, show_in,	\
+		store_in, IN_MAX, index),				\
+	SENSOR_ATTR_2(in##index##_min, S_IRUGO | S_IWUSR, show_in,	\
+		store_in, IN_LOW, index),				\
+	SENSOR_ATTR_2(in##index##_alarm, S_IRUGO, show_alarm_beep,	\
+		NULL, ALARM_STATUS, index + ((index > 2) ? 1 : 0)),	\
+	SENSOR_ATTR_2(in##index##_beep, S_IWUSR | S_IRUGO,		\
+		show_alarm_beep, store_beep, BEEP_ENABLE,		\
+		index + ((index > 2) ? 1 : 0))
+
+#define SENSOR_ATTR_FAN(index)						\
+	SENSOR_ATTR_2(fan##index##_alarm, S_IRUGO, show_alarm_beep,	\
+		NULL, ALARM_STATUS, index + 17),			\
+	SENSOR_ATTR_2(fan##index##_beep, S_IWUSR | S_IRUGO,		\
+		show_alarm_beep, store_beep, BEEP_ENABLE, index + 17),	\
+	SENSOR_ATTR_2(fan##index##_input, S_IRUGO, show_fan,		\
+		NULL, FAN_INPUT, index - 1),				\
+	SENSOR_ATTR_2(fan##index##_min, S_IWUSR | S_IRUGO,		\
+		show_fan, store_fan_min, FAN_MIN, index - 1)
+
+#define SENSOR_ATTR_PWM(index)						\
+	SENSOR_ATTR_2(pwm##index, S_IWUSR | S_IRUGO, show_pwm,		\
+		store_pwm, PWM_DUTY, index - 1),			\
+	SENSOR_ATTR_2(pwm##index##_nonstop, S_IWUSR | S_IRUGO,		\
+		show_pwm, store_pwm, PWM_NONSTOP, index - 1),		\
+	SENSOR_ATTR_2(pwm##index##_start, S_IWUSR | S_IRUGO,		\
+		show_pwm, store_pwm, PWM_START, index - 1),		\
+	SENSOR_ATTR_2(pwm##index##_stop_time, S_IWUSR | S_IRUGO,	\
+		show_pwm, store_pwm, PWM_STOP_TIME, index - 1)
+
+#define SENSOR_ATTR_TEMP(index)						\
+	SENSOR_ATTR_2(temp##index##_type, S_IRUGO | S_IWUSR,		\
+		show_temp_mode, store_temp_mode, NOT_USED, index - 1),	\
+	SENSOR_ATTR_2(temp##index##_input, S_IRUGO, show_temp,		\
+		NULL, TEMP_READ, index - 1),				\
+	SENSOR_ATTR_2(temp##index##_max, S_IRUGO | S_IWUSR, show_temp,	\
+		store_temp, TEMP_CRIT, index - 1),			\
+	SENSOR_ATTR_2(temp##index##_max_hyst, S_IRUGO | S_IWUSR,	\
+		show_temp, store_temp, TEMP_CRIT_HYST, index - 1),	\
+	SENSOR_ATTR_2(temp##index##_warn, S_IRUGO | S_IWUSR, show_temp,	\
+		store_temp, TEMP_WARN, index - 1),			\
+	SENSOR_ATTR_2(temp##index##_warn_hyst, S_IRUGO | S_IWUSR,	\
+		show_temp, store_temp, TEMP_WARN_HYST, index - 1),	\
+	SENSOR_ATTR_2(temp##index##_alarm, S_IRUGO,			\
+		show_alarm_beep, NULL, ALARM_STATUS, index + 11),	\
+	SENSOR_ATTR_2(temp##index##_beep, S_IWUSR | S_IRUGO,		\
+		show_alarm_beep, store_beep, BEEP_ENABLE, index + 11),	\
+	SENSOR_ATTR_2(temp##index##_auto_channels_pwm,			\
+		S_IRUGO | S_IWUSR, show_sf_ctrl, store_sf_ctrl,		\
+		TEMP_FAN_MAP, index - 1),				\
+	SENSOR_ATTR_2(temp##index##_pwm_enable, S_IWUSR | S_IRUGO,	\
+		show_sf_ctrl, store_sf_ctrl, TEMP_PWM_ENABLE,		\
+		index - 1),						\
+	SENSOR_ATTR_2(thermal_cruise##index, S_IRUGO | S_IWUSR,		\
+		show_sf_ctrl, store_sf_ctrl, TEMP_CRUISE, index - 1),	\
+	SENSOR_ATTR_2(tolerance##index, S_IRUGO | S_IWUSR, show_sf_ctrl,\
+		store_sf_ctrl, TEMP_TOLERANCE, index - 1),		\
+	SENSOR_ATTR_2(temp##index##_auto_point1_pwm, S_IRUGO | S_IWUSR, \
+		show_sf2_pwm, store_sf2_pwm, 0, index - 1),		\
+	SENSOR_ATTR_2(temp##index##_auto_point2_pwm, S_IRUGO | S_IWUSR, \
+		show_sf2_pwm, store_sf2_pwm, 1, index - 1),		\
+	SENSOR_ATTR_2(temp##index##_auto_point3_pwm, S_IRUGO | S_IWUSR, \
+		show_sf2_pwm, store_sf2_pwm, 2, index - 1),		\
+	SENSOR_ATTR_2(temp##index##_auto_point4_pwm, S_IRUGO | S_IWUSR, \
+		show_sf2_pwm, store_sf2_pwm, 3, index - 1),		\
+	SENSOR_ATTR_2(temp##index##_auto_point5_pwm, S_IRUGO | S_IWUSR, \
+		show_sf2_pwm, store_sf2_pwm, 4, index - 1),		\
+	SENSOR_ATTR_2(temp##index##_auto_point6_pwm, S_IRUGO | S_IWUSR, \
+		show_sf2_pwm, store_sf2_pwm, 5, index - 1),		\
+	SENSOR_ATTR_2(temp##index##_auto_point7_pwm, S_IRUGO | S_IWUSR, \
+		show_sf2_pwm, store_sf2_pwm, 6, index - 1),		\
+	SENSOR_ATTR_2(temp##index##_auto_point1_temp, S_IRUGO | S_IWUSR,\
+		show_sf2_temp, store_sf2_temp, 0, index - 1),		\
+	SENSOR_ATTR_2(temp##index##_auto_point2_temp, S_IRUGO | S_IWUSR,\
+		show_sf2_temp, store_sf2_temp, 1, index - 1),		\
+	SENSOR_ATTR_2(temp##index##_auto_point3_temp, S_IRUGO | S_IWUSR,\
+		show_sf2_temp, store_sf2_temp, 2, index - 1),		\
+	SENSOR_ATTR_2(temp##index##_auto_point4_temp, S_IRUGO | S_IWUSR,\
+		show_sf2_temp, store_sf2_temp, 3, index - 1),		\
+	SENSOR_ATTR_2(temp##index##_auto_point5_temp, S_IRUGO | S_IWUSR,\
+		show_sf2_temp, store_sf2_temp, 4, index - 1),		\
+	SENSOR_ATTR_2(temp##index##_auto_point6_temp, S_IRUGO | S_IWUSR,\
+		show_sf2_temp, store_sf2_temp, 5, index - 1),		\
+	SENSOR_ATTR_2(temp##index##_auto_point7_temp, S_IRUGO | S_IWUSR,\
+		show_sf2_temp, store_sf2_temp, 6, index - 1)
+
+static struct sensor_device_attribute_2 w83793_sensor_attr_2[] = {
+	SENSOR_ATTR_IN(0),
+	SENSOR_ATTR_IN(1),
+	SENSOR_ATTR_IN(2),
+	SENSOR_ATTR_IN(3),
+	SENSOR_ATTR_IN(4),
+	SENSOR_ATTR_IN(5),
+	SENSOR_ATTR_IN(6),
+	SENSOR_ATTR_IN(7),
+	SENSOR_ATTR_IN(8),
+	SENSOR_ATTR_IN(9),
+	SENSOR_ATTR_TEMP(1),
+	SENSOR_ATTR_TEMP(2),
+	SENSOR_ATTR_TEMP(3),
+	SENSOR_ATTR_TEMP(4),
+	SENSOR_ATTR_TEMP(5),
+	SENSOR_ATTR_TEMP(6),
+	SENSOR_ATTR_FAN(1),
+	SENSOR_ATTR_FAN(2),
+	SENSOR_ATTR_FAN(3),
+	SENSOR_ATTR_FAN(4),
+	SENSOR_ATTR_FAN(5),
+	SENSOR_ATTR_PWM(1),
+	SENSOR_ATTR_PWM(2),
+	SENSOR_ATTR_PWM(3),
+};
+
+/* Fan6-Fan12 */
+static struct sensor_device_attribute_2 w83793_left_fan[] = {
+	SENSOR_ATTR_FAN(6),
+	SENSOR_ATTR_FAN(7),
+	SENSOR_ATTR_FAN(8),
+	SENSOR_ATTR_FAN(9),
+	SENSOR_ATTR_FAN(10),
+	SENSOR_ATTR_FAN(11),
+	SENSOR_ATTR_FAN(12),
+};
+
+/* Pwm4-Pwm8 */
+static struct sensor_device_attribute_2 w83793_left_pwm[] = {
+	SENSOR_ATTR_PWM(4),
+	SENSOR_ATTR_PWM(5),
+	SENSOR_ATTR_PWM(6),
+	SENSOR_ATTR_PWM(7),
+	SENSOR_ATTR_PWM(8),
+};
+
+static struct sensor_device_attribute_2 sda_single_files[] = {
+	SENSOR_ATTR_2(cpu0_vid, S_IRUGO, show_vid, NULL, NOT_USED, 0),
+	SENSOR_ATTR_2(cpu1_vid, S_IRUGO, show_vid, NULL, NOT_USED, 1),
+	SENSOR_ATTR_2(vrm, S_IWUSR | S_IRUGO, show_vrm, store_vrm,
+		      NOT_USED, NOT_USED),
+	SENSOR_ATTR_2(chassis, S_IWUSR | S_IRUGO, show_alarm_beep,
+		      store_chassis_clear, ALARM_STATUS, 30),
+	SENSOR_ATTR_2(beep_enable, S_IWUSR | S_IRUGO, show_beep_enable,
+		      store_beep_enable, NOT_USED, NOT_USED),
+	SENSOR_ATTR_2(pwm_default, S_IWUSR | S_IRUGO, show_sf_setup,
+		      store_sf_setup, SETUP_PWM_DEFAULT, NOT_USED),
+	SENSOR_ATTR_2(pwm_uptime, S_IWUSR | S_IRUGO, show_sf_setup,
+		      store_sf_setup, SETUP_PWM_UPTIME, NOT_USED),
+	SENSOR_ATTR_2(pwm_downtime, S_IWUSR | S_IRUGO, show_sf_setup,
+		      store_sf_setup, SETUP_PWM_DOWNTIME, NOT_USED),
+	SENSOR_ATTR_2(temp_critical, S_IWUSR | S_IRUGO, show_sf_setup,
+		      store_sf_setup, SETUP_TEMP_CRITICAL, NOT_USED),
+};
+
+static void w83793_init_client(struct i2c_client *client)
+{
+	if (reset) {
+		w83793_write_value(client, W83793_REG_CONFIG, 0x80);
+	}
+
+	/* Start monitoring */
+	w83793_write_value(client, W83793_REG_CONFIG,
+			   w83793_read_value(client, W83793_REG_CONFIG) | 0x01);
+
+}
+
+static int w83793_attach_adapter(struct i2c_adapter *adapter)
+{
+	if (!(adapter->class & I2C_CLASS_HWMON))
+		return 0;
+	return i2c_probe(adapter, &addr_data, w83793_detect);
+}
+
+static int w83793_detach_client(struct i2c_client *client)
+{
+	struct w83793_data *data = i2c_get_clientdata(client);
+	struct device *dev = &client->dev;
+	int err, i;
+
+	/* main client */
+	if (data) {
+		hwmon_device_unregister(data->class_dev);
+
+		for (i = 0; i < ARRAY_SIZE(w83793_sensor_attr_2); i++)
+			device_remove_file(dev,
+					   &w83793_sensor_attr_2[i].dev_attr);
+
+		for (i = 0; i < ARRAY_SIZE(sda_single_files); i++)
+			device_remove_file(dev, &sda_single_files[i].dev_attr);
+
+		for (i = 0; i < ARRAY_SIZE(w83793_left_fan); i++)
+			device_remove_file(dev, &w83793_left_fan[i].dev_attr);
+
+		for (i = 0; i < ARRAY_SIZE(w83793_left_pwm); i++)
+			device_remove_file(dev, &w83793_left_pwm[i].dev_attr);
+	}
+
+	if ((err = i2c_detach_client(client)))
+		return err;
+
+	/* main client */
+	if (data)
+		kfree(data);
+	/* subclient */
+	else
+		kfree(client);
+
+	return 0;
+}
+
+static int
+w83793_create_subclient(struct i2c_adapter *adapter,
+			struct i2c_client *client, int addr,
+			struct i2c_client **sub_cli)
+{
+	int err = 0;
+	struct i2c_client *sub_client;
+
+	(*sub_cli) = sub_client =
+	    kzalloc(sizeof(struct i2c_client), GFP_KERNEL);
+	if (!(sub_client)) {
+		return -ENOMEM;
+	}
+	sub_client->addr = 0x48 + addr;
+	i2c_set_clientdata(sub_client, NULL);
+	sub_client->adapter = adapter;
+	sub_client->driver = &w83793_driver;
+	strlcpy(sub_client->name, "w83793 subclient", I2C_NAME_SIZE);
+	if ((err = i2c_attach_client(sub_client))) {
+		dev_err(&client->dev, "subclient registration "
+			"at address 0x%x failed\n", sub_client->addr);
+		kfree(sub_client);
+	}
+	return err;
+}
+
+static int
+w83793_detect_subclients(struct i2c_adapter *adapter, int address,
+			 int kind, struct i2c_client *client)
+{
+	int i, id, err;
+	u8 tmp;
+	struct w83793_data *data = i2c_get_clientdata(client);
+
+	id = i2c_adapter_id(adapter);
+	if (force_subclients[0] == id && force_subclients[1] == address) {
+		for (i = 2; i <= 3; i++) {
+			if (force_subclients[i] < 0x48
+			    || force_subclients[i] > 0x4f) {
+				dev_err(&client->dev,
+					"invalid subclient "
+					"address %d; must be 0x48-0x4f\n",
+					force_subclients[i]);
+				err = -EINVAL;
+				goto ERROR_SC_0;
+			}
+		}
+		w83793_write_value(client, W83793_REG_I2C_SUBADDR,
+				   (force_subclients[2] & 0x07) |
+				   ((force_subclients[3] & 0x07) << 4));
+	}
+
+	tmp = w83793_read_value(client, W83793_REG_I2C_SUBADDR);
+	if (!(tmp & 0x08)) {
+		err =
+		    w83793_create_subclient(adapter, client, tmp & 0x7,
+					    &data->lm75[0]);
+		if (err < 0)
+			goto ERROR_SC_0;
+	}
+	if (!(tmp & 0x80)) {
+		if ((data->lm75[0] != NULL)
+		    && ((tmp & 0x7) == ((tmp >> 4) & 0x7))) {
+			dev_err(&client->dev,
+				"duplicate addresses 0x%x, "
+				"use force_subclients\n", data->lm75[0]->addr);
+			err = -ENODEV;
+			goto ERROR_SC_1;
+		}
+		err = w83793_create_subclient(adapter, client,
+					      (tmp >> 4) & 0x7, &data->lm75[1]);
+		if (err < 0)
+			goto ERROR_SC_1;
+	}
+
+	return 0;
+
+	/* Undo inits in case of errors */
+
+ERROR_SC_1:
+	if (data->lm75[0] != NULL) {
+		i2c_detach_client(data->lm75[0]);
+		kfree(data->lm75[0]);
+	}
+ERROR_SC_0:
+	return err;
+}
+
+static int w83793_detect(struct i2c_adapter *adapter, int address, int kind)
+{
+	int i;
+	u8 tmp, val;
+	struct i2c_client *client;
+	struct device *dev;
+	struct w83793_data *data;
+	int files_fan = ARRAY_SIZE(w83793_left_fan) / 7;
+	int files_pwm = ARRAY_SIZE(w83793_left_pwm) / 5;
+	int err = 0;
+
+	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) {
+		goto exit;
+	}
+
+	/* OK. For now, we presume we have a valid client. We now create the
+	   client structure, even though we cannot fill it completely yet.
+	   But it allows us to access w83793_{read,write}_value. */
+
+	if (!(data = kzalloc(sizeof(struct w83793_data), GFP_KERNEL))) {
+		err = -ENOMEM;
+		goto exit;
+	}
+
+	client = &data->client;
+	dev = &client->dev;
+	i2c_set_clientdata(client, data);
+	client->addr = address;
+	client->adapter = adapter;
+	client->driver = &w83793_driver;
+
+	data->bank = i2c_smbus_read_byte_data(client, W83793_REG_BANKSEL);
+
+	/* Now, we do the remaining detection. */
+	if (kind < 0) {
+		tmp = data->bank & 0x80 ? 0x5c : 0xa3;
+		/* Check Winbond vendor ID */
+		if (tmp != i2c_smbus_read_byte_data(client,
+							W83793_REG_VENDORID)) {
+			pr_debug("w83793: Detection failed at check "
+				 "vendor id\n");
+			err = -ENODEV;
+			goto free_mem;
+		}
+
+		/* If Winbond chip, address of chip and W83793_REG_I2C_ADDR
+		   should match */
+		if ((data->bank & 0x07) == 0
+		 && i2c_smbus_read_byte_data(client, W83793_REG_I2C_ADDR) !=
+		    (address << 1)) {
+			pr_debug("w83793: Detection failed at check "
+				 "i2c addr\n");
+			err = -ENODEV;
+			goto free_mem;
+		}
+
+	}
+
+	/* We have either had a force parameter, or we have already detected the
+	   Winbond. Determine the chip type now */
+
+	if (kind <= 0) {
+		if (0x7b == w83793_read_value(client, W83793_REG_CHIPID)) {
+			kind = w83793;
+		} else {
+			if (kind == 0)
+				dev_warn(&adapter->dev, "w83793: Ignoring "
+					 "'force' parameter for unknown chip "
+					 "at address 0x%02x\n", address);
+			err = -ENODEV;
+			goto free_mem;
+		}
+	}
+
+	/* Fill in the remaining client fields and put into the global list */
+	strlcpy(client->name, "w83793", I2C_NAME_SIZE);
+
+	mutex_init(&data->update_lock);
+
+	/* Tell the I2C layer a new client has arrived */
+	if ((err = i2c_attach_client(client)))
+		goto free_mem;
+
+	if ((err = w83793_detect_subclients(adapter, address, kind, client)))
+		goto detach_client;
+
+	/* Initialize the chip */
+	w83793_init_client(client);
+
+	data->vrm = vid_which_vrm();
+	/*
+	   Only fan 1-5 has their own input pins,
+	   Pwm 1-3 has their own pins
+	 */
+	data->has_fan = 0x1f;
+	data->has_pwm = 0x07;
+	tmp = w83793_read_value(client, W83793_REG_MFC);
+	val = w83793_read_value(client, W83793_REG_FANIN_CTRL);
+
+	/* check the function of pins 49-56 */
+	if (!(tmp & 0x80)) {
+		data->has_pwm |= 0x18;	/* pwm 4,5 */
+		if (val & 0x01) {	/* fan 6 */
+			data->has_fan |= 0x20;
+			data->has_pwm |= 0x20;
+		}
+		if (val & 0x02) {	/* fan 7 */
+			data->has_fan |= 0x40;
+			data->has_pwm |= 0x40;
+		}
+		if (!(tmp & 0x40) && (val & 0x04)) {	/* fan 8 */
+			data->has_fan |= 0x80;
+			data->has_pwm |= 0x80;
+		}
+	}
+
+	if (0x08 == (tmp & 0x0c)) {
+		if (val & 0x08)	/* fan 9 */
+			data->has_fan |= 0x100;
+		if (val & 0x10)	/* fan 10 */
+			data->has_fan |= 0x200;
+	}
+
+	if (0x20 == (tmp & 0x30)) {
+		if (val & 0x20)	/* fan 11 */
+			data->has_fan |= 0x400;
+		if (val & 0x40)	/* fan 12 */
+			data->has_fan |= 0x800;
+	}
+
+	if ((tmp & 0x01) && (val & 0x04)) {	/* fan 8, second location */
+		data->has_fan |= 0x80;
+		data->has_pwm |= 0x80;
+	}
+
+	/* Register sysfs hooks */
+	for (i = 0; i < ARRAY_SIZE(w83793_sensor_attr_2); i++) {
+		err = device_create_file(dev,
+					 &w83793_sensor_attr_2[i].dev_attr);
+		if (err)
+			goto exit_remove;
+	}
+
+	for (i = 0; i < ARRAY_SIZE(sda_single_files); i++) {
+		err = device_create_file(dev, &sda_single_files[i].dev_attr);
+		if (err)
+			goto exit_remove;
+
+	}
+
+	for (i = 5; i < 12; i++) {
+		int j;
+		if (!(data->has_fan & (1 << i)))
+			continue;
+		for (j = 0; j < files_fan; j++) {
+			err = device_create_file(dev,
+					   &w83793_left_fan[(i - 5) * files_fan
+								+ j].dev_attr);
+			if (err)
+				goto exit_remove;
+		}
+	}
+
+	for (i = 3; i < 8; i++) {
+		int j;
+		if (!(data->has_pwm & (1 << i)))
+			continue;
+		for (j = 0; j < files_pwm; j++) {
+			err = device_create_file(dev,
+					   &w83793_left_pwm[(i - 3) * files_pwm
+								+ j].dev_attr);
+			if (err)
+				goto exit_remove;
+		}
+	}
+
+	data->class_dev = hwmon_device_register(dev);
+	if (IS_ERR(data->class_dev)) {
+		err = PTR_ERR(data->class_dev);
+		goto exit_remove;
+	}
+
+	return 0;
+
+	/* Unregister sysfs hooks */
+
+exit_remove:
+	for (i = 0; i < ARRAY_SIZE(w83793_sensor_attr_2); i++)
+		device_remove_file(dev, &w83793_sensor_attr_2[i].dev_attr);
+
+	for (i = 0; i < ARRAY_SIZE(sda_single_files); i++)
+		device_remove_file(dev, &sda_single_files[i].dev_attr);
+
+	for (i = 0; i < ARRAY_SIZE(w83793_left_fan); i++)
+		device_remove_file(dev, &w83793_left_fan[i].dev_attr);
+
+	for (i = 0; i < ARRAY_SIZE(w83793_left_pwm); i++)
+		device_remove_file(dev, &w83793_left_pwm[i].dev_attr);
+
+	if (data->lm75[0] != NULL) {
+		i2c_detach_client(data->lm75[0]);
+		kfree(data->lm75[0]);
+	}
+	if (data->lm75[1] != NULL) {
+		i2c_detach_client(data->lm75[1]);
+		kfree(data->lm75[1]);
+	}
+detach_client:
+	i2c_detach_client(client);
+free_mem:
+	kfree(data);
+exit:
+	return err;
+}
+
+static void w83793_update_nonvolatile(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct w83793_data *data = i2c_get_clientdata(client);
+	int i, j;
+	/*
+	   They are somewhat "stable" registers, and to update them everytime
+	   takes so much time, it's just not worthy. Update them in a long
+	   interval to avoid exception.
+	 */
+	if (!(time_after(jiffies, data->last_nonvolatile + HZ * 300)
+	      || !data->valid))
+		return;
+	/* update voltage limits */
+	for (i = 1; i < 3; i++) {
+		for (j = 0; j < ARRAY_SIZE(data->in); j++) {
+			data->in[j][i] =
+			    w83793_read_value(client, W83793_REG_IN[j][i]);
+		}
+		data->in_low_bits[i] =
+		    w83793_read_value(client, W83793_REG_IN_LOW_BITS[i]);
+	}
+
+	for (i = 0; i < ARRAY_SIZE(data->fan_min); i++) {
+		/* Update the Fan measured value and limits */
+		if (!(data->has_fan & (1 << i))) {
+			continue;
+		}
+		data->fan_min[i] =
+		    w83793_read_value(client, W83793_REG_FAN_MIN(i)) << 8;
+		data->fan_min[i] |=
+		    w83793_read_value(client, W83793_REG_FAN_MIN(i) + 1);
+	}
+
+	for (i = 0; i < ARRAY_SIZE(data->temp_fan_map); i++) {
+		data->temp_fan_map[i] =
+		    w83793_read_value(client, W83793_REG_TEMP_FAN_MAP(i));
+		for (j = 1; j < 5; j++) {
+			data->temp[i][j] =
+			    w83793_read_value(client, W83793_REG_TEMP[i][j]);
+		}
+		data->temp_cruise[i] =
+		    w83793_read_value(client, W83793_REG_TEMP_CRUISE(i));
+		for (j = 0; j < 7; j++) {
+			data->sf2_pwm[i][j] =
+			    w83793_read_value(client, W83793_REG_SF2_PWM(i, j));
+			data->sf2_temp[i][j] =
+			    w83793_read_value(client,
+					      W83793_REG_SF2_TEMP(i, j));
+		}
+	}
+
+	for (i = 0; i < ARRAY_SIZE(data->temp_mode); i++)
+		data->temp_mode[i] =
+		    w83793_read_value(client, W83793_REG_TEMP_MODE[i]);
+
+	for (i = 0; i < ARRAY_SIZE(data->tolerance); i++) {
+		data->tolerance[i] =
+		    w83793_read_value(client, W83793_REG_TEMP_TOL(i));
+	}
+
+	for (i = 0; i < ARRAY_SIZE(data->pwm); i++) {
+		if (!(data->has_pwm & (1 << i)))
+			continue;
+		data->pwm[i][PWM_NONSTOP] =
+		    w83793_read_value(client, W83793_REG_PWM(i, PWM_NONSTOP));
+		data->pwm[i][PWM_START] =
+		    w83793_read_value(client, W83793_REG_PWM(i, PWM_START));
+		data->pwm_stop_time[i] =
+		    w83793_read_value(client, W83793_REG_PWM_STOP_TIME(i));
+	}
+
+	data->pwm_default = w83793_read_value(client, W83793_REG_PWM_DEFAULT);
+	data->pwm_enable = w83793_read_value(client, W83793_REG_PWM_ENABLE);
+	data->pwm_uptime = w83793_read_value(client, W83793_REG_PWM_UPTIME);
+	data->pwm_downtime = w83793_read_value(client, W83793_REG_PWM_DOWNTIME);
+	data->temp_critical =
+	    w83793_read_value(client, W83793_REG_TEMP_CRITICAL);
+	data->beep_enable = w83793_read_value(client, W83793_REG_OVT_BEEP);
+
+	for (i = 0; i < ARRAY_SIZE(data->beeps); i++) {
+		data->beeps[i] = w83793_read_value(client, W83793_REG_BEEP(i));
+	}
+
+	data->last_nonvolatile = jiffies;
+}
+
+static struct w83793_data *w83793_update_device(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct w83793_data *data = i2c_get_clientdata(client);
+	int i;
+
+	mutex_lock(&data->update_lock);
+
+	if (!(time_after(jiffies, data->last_updated + HZ * 2)
+	      || !data->valid))
+		goto END;
+
+	/* Update the voltages measured value and limits */
+	for (i = 0; i < ARRAY_SIZE(data->in); i++)
+		data->in[i][IN_READ] =
+		    w83793_read_value(client, W83793_REG_IN[i][IN_READ]);
+
+	data->in_low_bits[IN_READ] =
+	    w83793_read_value(client, W83793_REG_IN_LOW_BITS[IN_READ]);
+
+	for (i = 0; i < ARRAY_SIZE(data->fan); i++) {
+		if (!(data->has_fan & (1 << i))) {
+			continue;
+		}
+		data->fan[i] =
+		    w83793_read_value(client, W83793_REG_FAN(i)) << 8;
+		data->fan[i] |=
+		    w83793_read_value(client, W83793_REG_FAN(i) + 1);
+	}
+
+	for (i = 0; i < ARRAY_SIZE(data->temp); i++)
+		data->temp[i][TEMP_READ] =
+		    w83793_read_value(client, W83793_REG_TEMP[i][TEMP_READ]);
+
+	data->temp_low_bits =
+	    w83793_read_value(client, W83793_REG_TEMP_LOW_BITS);
+
+	for (i = 0; i < ARRAY_SIZE(data->pwm); i++) {
+		if (data->has_pwm & (1 << i))
+			data->pwm[i][PWM_DUTY] =
+			    w83793_read_value(client,
+					      W83793_REG_PWM(i, PWM_DUTY));
+	}
+
+	for (i = 0; i < ARRAY_SIZE(data->alarms); i++)
+		data->alarms[i] =
+		    w83793_read_value(client, W83793_REG_ALARM(i));
+	data->vid[0] = w83793_read_value(client, W83793_REG_VID_INA);
+	data->vid[1] = w83793_read_value(client, W83793_REG_VID_INB);
+	w83793_update_nonvolatile(dev);
+	data->last_updated = jiffies;
+	data->valid = 1;
+
+END:
+	mutex_unlock(&data->update_lock);
+	return data;
+}
+
+/* Ignore the possibility that somebody change bank outside the driver
+   Must be called with data->update_lock held, except during initialization */
+static u8 w83793_read_value(struct i2c_client *client, u16 reg)
+{
+	struct w83793_data *data = i2c_get_clientdata(client);
+	u8 res = 0xff;
+	u8 new_bank = reg >> 8;
+
+	new_bank |= data->bank & 0xfc;
+	if (data->bank != new_bank) {
+		if (i2c_smbus_write_byte_data
+		    (client, W83793_REG_BANKSEL, new_bank) >= 0)
+			data->bank = new_bank;
+		else {
+			dev_err(&client->dev,
+				"set bank to %d failed, fall back "
+				"to bank %d, read reg 0x%x error\n",
+				new_bank, data->bank, reg);
+			res = 0x0;	/* read 0x0 from the chip */
+			goto END;
+		}
+	}
+	res = i2c_smbus_read_byte_data(client, reg & 0xff);
+END:
+	return res;
+}
+
+/* Must be called with data->update_lock held, except during initialization */
+static int w83793_write_value(struct i2c_client *client, u16 reg, u8 value)
+{
+	struct w83793_data *data = i2c_get_clientdata(client);
+	int res;
+	u8 new_bank = reg >> 8;
+
+	new_bank |= data->bank & 0xfc;
+	if (data->bank != new_bank) {
+		if ((res = i2c_smbus_write_byte_data
+		    (client, W83793_REG_BANKSEL, new_bank)) >= 0)
+			data->bank = new_bank;
+		else {
+			dev_err(&client->dev,
+				"set bank to %d failed, fall back "
+				"to bank %d, write reg 0x%x error\n",
+				new_bank, data->bank, reg);
+			goto END;
+		}
+	}
+
+	res = i2c_smbus_write_byte_data(client, reg & 0xff, value);
+END:
+	return res;
+}
+
+static int __init sensors_w83793_init(void)
+{
+	return i2c_add_driver(&w83793_driver);
+}
+
+static void __exit sensors_w83793_exit(void)
+{
+	i2c_del_driver(&w83793_driver);
+}
+
+MODULE_AUTHOR("Yuan Mu");
+MODULE_DESCRIPTION("w83793 driver");
+MODULE_LICENSE("GPL");
+
+module_init(sensors_w83793_init);
+module_exit(sensors_w83793_exit);
diff --git a/drivers/i2c/busses/i2c-ali1563.c b/drivers/i2c/busses/i2c-ali1563.c
index 33fbb47100a3..8e1e3f8e40a4 100644
--- a/drivers/i2c/busses/i2c-ali1563.c
+++ b/drivers/i2c/busses/i2c-ali1563.c
@@ -2,7 +2,7 @@
  *	i2c-ali1563.c - i2c driver for the ALi 1563 Southbridge
  *
  *	Copyright (C) 2004 Patrick Mochel
- *		      2005 Rudolf Marek <r.marek@sh.cvut.cz>
+ *		      2005 Rudolf Marek <r.marek@assembler.cz>
  *
  *	The 1563 southbridge is deceptively similar to the 1533, with a
  *	few notable exceptions. One of those happens to be the fact they