diff options
| author | Chen-Yu Tsai <wens@csie.org> | 2017-07-26 16:28:26 +0800 |
|---|---|---|
| committer | Lee Jones <lee.jones@linaro.org> | 2017-09-05 08:46:00 +0100 |
| commit | 7303733a6ca2a68b210ebdc09cace8b0ffe8b179 (patch) | |
| tree | fcec4906f2371b4ee7ff08a3a0107d64c7e8859a /drivers | |
| parent | 7e312ffdd7aa68f0110f5d95416f78ea29ceb984 (diff) | |
mfd: axp20x: Add support for AXP813 PMIC
The X-Powers AXP813 PMIC is normally used with Allwinner's A83T SoC.
It has the same range of functions as other X-Powers PMICs, such as
DC-DC buck converter and linear regulator outputs, AC-IN and VBUS
power supplies, power button trigger, GPIOs, ADCs, and a battery
charger.
Note that the IRQ table given in the datasheet is incorrect: in IRQ
enable/status registers 1, there are separate IRQs for ACIN and VBUS,
instead of bits [7:5] being the same as bits [4:2]. So it shares the
same IRQs as the AXP803, rather than the AXP288.
This patch adds basic mfd support for it, with only the power button
enabled.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Diffstat (limited to 'drivers')
| -rw-r--r-- | drivers/mfd/axp20x-rsb.c | 1 | ||||
| -rw-r--r-- | drivers/mfd/axp20x.c | 22 |
2 files changed, 23 insertions, 0 deletions
diff --git a/drivers/mfd/axp20x-rsb.c b/drivers/mfd/axp20x-rsb.c index fd5c7267b136..7ddbd9e8dd03 100644 --- a/drivers/mfd/axp20x-rsb.c +++ b/drivers/mfd/axp20x-rsb.c @@ -64,6 +64,7 @@ static const struct of_device_id axp20x_rsb_of_match[] = { { .compatible = "x-powers,axp803", .data = (void *)AXP803_ID }, { .compatible = "x-powers,axp806", .data = (void *)AXP806_ID }, { .compatible = "x-powers,axp809", .data = (void *)AXP809_ID }, + { .compatible = "x-powers,axp813", .data = (void *)AXP813_ID }, { }, }; MODULE_DEVICE_TABLE(of, axp20x_rsb_of_match); diff --git a/drivers/mfd/axp20x.c b/drivers/mfd/axp20x.c index 917b6ddc4f15..ec4271ca065c 100644 --- a/drivers/mfd/axp20x.c +++ b/drivers/mfd/axp20x.c @@ -44,6 +44,7 @@ static const char * const axp20x_model_names[] = { "AXP803", "AXP806", "AXP809", + "AXP813", }; static const struct regmap_range axp152_writeable_ranges[] = { @@ -870,6 +871,14 @@ static struct mfd_cell axp809_cells[] = { }, }; +static struct mfd_cell axp813_cells[] = { + { + .name = "axp20x-pek", + .num_resources = ARRAY_SIZE(axp803_pek_resources), + .resources = axp803_pek_resources, + } +}; + static struct axp20x_dev *axp20x_pm_power_off; static void axp20x_power_off(void) { @@ -956,6 +965,19 @@ int axp20x_match_device(struct axp20x_dev *axp20x) axp20x->regmap_cfg = &axp22x_regmap_config; axp20x->regmap_irq_chip = &axp809_regmap_irq_chip; break; + case AXP813_ID: + axp20x->nr_cells = ARRAY_SIZE(axp813_cells); + axp20x->cells = axp813_cells; + axp20x->regmap_cfg = &axp288_regmap_config; + /* + * The IRQ table given in the datasheet is incorrect. + * In IRQ enable/status registers 1, there are separate + * IRQs for ACIN and VBUS, instead of bits [7:5] being + * the same as bits [4:2]. So it shares the same IRQs + * as the AXP803, rather than the AXP288. + */ + axp20x->regmap_irq_chip = &axp803_regmap_irq_chip; + break; default: dev_err(dev, "unsupported AXP20X ID %lu\n", axp20x->variant); return -EINVAL; |