pcmcia: fix kernel-doc comments

Fix kernel-doc comments in drivers/pcmcia/:

- ti113x.h does not contain kernel-doc, so don't use /** to begin a doc
  comment
- yenta_socket.c: remove /** on non-kernel-doc comments;
  escape the ':' in an "http:" comment so that it won't be treated as a
  section heading;
- cs.c: remove /** on non-kernel-doc comments & add function parameter info
- ds.c: fix function parameter info

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

4 files changed, 13 insertions, 9 deletions

diff --git a/drivers/pcmcia/cs.c b/drivers/pcmcia/cs.c
index a0aca46ce877..56230dbd347a 100644
--- a/drivers/pcmcia/cs.c
+++ b/drivers/pcmcia/cs.c
@@ -89,7 +89,7 @@ DECLARE_RWSEM(pcmcia_socket_list_rwsem);
 EXPORT_SYMBOL(pcmcia_socket_list_rwsem);
 
 
-/**
+/*
  * Low-level PCMCIA socket drivers need to register with the PCCard
  * core using pcmcia_register_socket.
  *
@@ -174,6 +174,7 @@ static int pccardd(void *__skt);
 
 /**
  * pcmcia_register_socket - add a new pcmcia socket device
+ * @socket: the &socket to register
  */
 int pcmcia_register_socket(struct pcmcia_socket *socket)
 {
@@ -268,6 +269,7 @@ EXPORT_SYMBOL(pcmcia_register_socket);
 
 /**
  * pcmcia_unregister_socket - remove a pcmcia socket device
+ * @socket: the &socket to unregister
  */
 void pcmcia_unregister_socket(struct pcmcia_socket *socket)
 {
@@ -311,7 +313,7 @@ struct pcmcia_socket * pcmcia_get_socket_by_nr(unsigned int nr)
 }
 EXPORT_SYMBOL(pcmcia_get_socket_by_nr);
 
-/**
+/*
  * The central event handler.  Send_event() sends an event to the
  * 16-bit subsystem, which then calls the relevant device drivers.
  * Parse_events() interprets the event bits from
@@ -380,7 +382,7 @@ static int socket_reset(struct pcmcia_socket *skt)
 	return CS_GENERAL_FAILURE;
 }
 
-/**
+/*
  * socket_setup() and socket_shutdown() are called by the main event handler
  * when card insertion and removal events are received.
  * socket_setup() turns on socket power and resets the socket, in two stages.
diff --git a/drivers/pcmcia/ds.c b/drivers/pcmcia/ds.c
index 7bf78c127898..5cf89a91da1e 100644
--- a/drivers/pcmcia/ds.c
+++ b/drivers/pcmcia/ds.c
@@ -320,6 +320,7 @@ pcmcia_create_newid_file(struct pcmcia_driver *drv)
 
 /**
  * pcmcia_register_driver - register a PCMCIA driver with the bus core
+ * @driver: the &driver being registered
  *
  * Registers a PCMCIA driver with the PCMCIA bus core.
  */
@@ -354,6 +355,7 @@ EXPORT_SYMBOL(pcmcia_register_driver);
 
 /**
  * pcmcia_unregister_driver - unregister a PCMCIA driver with the bus core
+ * @driver: the &driver being unregistered
  */
 void pcmcia_unregister_driver(struct pcmcia_driver *driver)
 {
@@ -840,8 +842,8 @@ static void pcmcia_bus_rescan(struct pcmcia_socket *skt, int new_cis)
 
 /**
  * pcmcia_load_firmware - load CIS from userspace if device-provided is broken
- * @dev - the pcmcia device which needs a CIS override
- * @filename - requested filename in /lib/firmware/
+ * @dev: the pcmcia device which needs a CIS override
+ * @filename: requested filename in /lib/firmware/
  *
  * This uses the in-kernel firmware loading mechanism to use a "fake CIS" if
  * the one provided by the card is broken. The firmware files reside in
diff --git a/drivers/pcmcia/ti113x.h b/drivers/pcmcia/ti113x.h
index 62e9ebf967f9..d29657bf1b40 100644
--- a/drivers/pcmcia/ti113x.h
+++ b/drivers/pcmcia/ti113x.h
@@ -874,7 +874,7 @@ static int ti1250_override(struct yenta_socket *socket)
  */
 
 #ifdef CONFIG_YENTA_ENE_TUNE
-/**
+/*
  * set/clear various test bits:
  * Defaults to clear the bit.
  * - mask (u8) defines what bits to change
diff --git a/drivers/pcmcia/yenta_socket.c b/drivers/pcmcia/yenta_socket.c
index 20853a03202d..0ab1fb65cdc3 100644
--- a/drivers/pcmcia/yenta_socket.c
+++ b/drivers/pcmcia/yenta_socket.c
@@ -48,7 +48,7 @@ MODULE_PARM_DESC(pwr_irqs_off, "Force IRQs off during power-on of slot. Use only
 #define to_cycles(ns)	((ns)/120)
 #define to_ns(cycles)	((cycles)*120)
 
-/**
+/*
  * yenta PCI irq probing.
  * currently only used in the TI/EnE initialization code
  */
@@ -888,7 +888,7 @@ static unsigned int yenta_probe_irq(struct yenta_socket *socket, u32 isa_irq_mas
 }
 
 
-/**
+/*
  * yenta PCI irq probing.
  * currently only used in the TI/EnE initialization code
  */
@@ -1012,7 +1012,7 @@ static void yenta_config_init(struct yenta_socket *socket)
  * invisible during PCI scans because of a misconfigured subordinate number
  * of the parent brige - some BIOSes seem to be too lazy to set it right.
  * Does the fixup carefully by checking how far it can go without conflicts.
- * See http://bugzilla.kernel.org/show_bug.cgi?id=2944 for more information.
+ * See http\://bugzilla.kernel.org/show_bug.cgi?id=2944 for more information.
  */
 static void yenta_fixup_parent_bridge(struct pci_bus *cardbus_bridge)
 {