Merge tag 'thermal-v6.2-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux

Pull thermal driver changes for 6.2-rc1 from Daniel Lezcano:

"- Add the sm8450 QCom compatible string in the DT bindings (Luca
   Weiss)

 - Use devm_platform_get_and_ioremap_resource on the ST platform to
   group two calls into a single one (Minghao Chi)

 - Add the sm8550 QCom compatible string in the DT bindings (Neil
   Armstrong)

 - Use GENMASK instead of bitmaps and validate the temperature after
   reading it (Marcus Folkesson)

 - Convert generic-adc-thermal to DT schema (Rob Herring)

 - Fix the debug print message where the logic is inverted (Keerthy)

 - Fix memory leak on thermal_of_zone_register() failure (Ido Schimmel)

 - Add support for IPQ8074 in the tsens driver along with the DT
   bindings (Robert Marko)

 - Fix and rework the debugfs code in the tsens driver (Christian
   Marangi)

 - Add calibration and DT documentation for the imx8mm driver (Marek
   Vasut)

 - Add DT bindings and compatible for the Mediatek SoCs mt7981 and
   mt7983 (Daniel Golle)

 - Don't show an error message if it happens at probe time while it
   will be deferred on the QCom SPMI ADC driver (Johan Hovold)

 - Add the HWMon support on the imx8mm board (Alexander Stein)

 - Remove a pointless include in the power allocator governor
   (Christophe JAILLET)

 - Add interrupt DT bindings for QCom SoCs SC8280XP, SM6350 and SM8450
   (Krzysztof Kozlowski)

 - Fix inaccurate warning message for the QCom tsens gen2 (Luca Weiss)

 - Demote error log of thermal zone register to debug on the tsens QCom
   driver (Manivannan Sadhasivam)

 - Consolidate the TI Bandgap driver regarding how is handled the efuse
   values and the errata handling (Bryan Brattlof)

 - Document the Renesas RZ/Five as compatible with RZ/G2UL in the DT
   bindings (Lad Prabhakar)

 - Fix the irq handler return value in the LMh driver (Bjorn Andersson)

 - Delete platform remove callback as it is empty (Uwe Kleine-König)"

* tag 'thermal-v6.2-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux: (34 commits)
  thermal/drivers/imx_sc_thermal: Drop empty platform remove function
  thermal/drivers/qcom/lmh: Fix irq handler return value
  dt-bindings: thermal: qcom-tsens: Add compatible for sm8550
  thermal/drivers/st: Use devm_platform_get_and_ioremap_resource()
  dt-bindings: thermal: rzg2l-thermal: Document RZ/Five SoC
  dt-bindings: thermal: k3-j72xx: conditionally require efuse reg range
  dt-bindings: thermal: k3-j72xx: elaborate on binding description
  thermal/drivers/k3_j72xx_bandgap: Map fuse_base only for erratum workaround
  thermal/drivers/k3_j72xx_bandgap: Remove fuse_base from structure
  thermal/drivers/k3_j72xx_bandgap: Use bool for i2128 erratum flag
  thermal/drivers/k3_j72xx_bandgap: Simplify k3_thermal_get_temp() function
  thermal/drivers/qcom: Demote error log of thermal zone register to debug
  thermal/drivers/qcom/temp-alarm: Fix inaccurate warning for gen2
  dt-bindings: thermal: qcom-tsens: narrow interrupts for SC8280XP, SM6350 and SM8450
  thermal/core/power allocator: Remove a useless include
  thermal/drivers/imx8mm: Add hwmon support
  thermal: qcom-spmi-adc-tm5: suppress probe-deferral error message
  dt-bindings: thermal: mediatek: add compatible string for MT7986 and MT7981 SoC
  thermal: ti-soc-thermal: Drop comma after SoC match table sentinel
  thermal/drivers/imx: Add support for loading calibration data from OCOTP
  ...

16 files changed, 308 insertions, 78 deletions

diff --git a/drivers/thermal/gov_power_allocator.c b/drivers/thermal/gov_power_allocator.c
index 2d1aeaba38a8..d5d4eae16771 100644
--- a/drivers/thermal/gov_power_allocator.c
+++ b/drivers/thermal/gov_power_allocator.c
@@ -8,7 +8,6 @@
 
 #define pr_fmt(fmt) "Power allocator: " fmt
 
-#include <linux/rculist.h>
 #include <linux/slab.h>
 #include <linux/thermal.h>
 
diff --git a/drivers/thermal/imx8mm_thermal.c b/drivers/thermal/imx8mm_thermal.c
index e2c2673025a7..d247b48696cb 100644
--- a/drivers/thermal/imx8mm_thermal.c
+++ b/drivers/thermal/imx8mm_thermal.c
@@ -10,21 +10,40 @@
 #include <linux/err.h>
 #include <linux/io.h>
 #include <linux/module.h>
+#include <linux/nvmem-consumer.h>
 #include <linux/of.h>
 #include <linux/of_device.h>
 #include <linux/platform_device.h>
+#include <linux/slab.h>
 #include <linux/thermal.h>
 
 #include "thermal_core.h"
+#include "thermal_hwmon.h"
 
 #define TER			0x0	/* TMU enable */
 #define TPS			0x4
 #define TRITSR			0x20	/* TMU immediate temp */
+/* TMU calibration data registers */
+#define TASR			0x28
+#define TASR_BUF_SLOPE_MASK	GENMASK(19, 16)
+#define TASR_BUF_VREF_MASK	GENMASK(4, 0)	/* TMU_V1 */
+#define TASR_BUF_VERF_SEL_MASK	GENMASK(1, 0)	/* TMU_V2 */
+#define TCALIV(n)		(0x30 + ((n) * 4))
+#define TCALIV_EN		BIT(31)
+#define TCALIV_HR_MASK		GENMASK(23, 16)	/* TMU_V1 */
+#define TCALIV_RT_MASK		GENMASK(7, 0)	/* TMU_V1 */
+#define TCALIV_SNSR105C_MASK	GENMASK(27, 16)	/* TMU_V2 */
+#define TCALIV_SNSR25C_MASK	GENMASK(11, 0)	/* TMU_V2 */
+#define TRIM			0x3c
+#define TRIM_BJT_CUR_MASK	GENMASK(23, 20)
+#define TRIM_BGR_MASK		GENMASK(31, 28)
+#define TRIM_VLSB_MASK		GENMASK(15, 12)
+#define TRIM_EN_CH		BIT(7)
 
 #define TER_ADC_PD		BIT(30)
 #define TER_EN			BIT(31)
-#define TRITSR_TEMP0_VAL_MASK	0xff
-#define TRITSR_TEMP1_VAL_MASK	0xff0000
+#define TRITSR_TEMP0_VAL_MASK	GENMASK(7, 0)
+#define TRITSR_TEMP1_VAL_MASK	GENMASK(23, 16)
 
 #define PROBE_SEL_ALL		GENMASK(31, 30)
 
@@ -32,6 +51,25 @@
 #define SIGN_BIT		BIT(7)
 #define TEMP_VAL_MASK		GENMASK(6, 0)
 
+/* TMU OCOTP calibration data bitfields */
+#define ANA0_EN			BIT(25)
+#define ANA0_BUF_VREF_MASK	GENMASK(24, 20)
+#define ANA0_BUF_SLOPE_MASK	GENMASK(19, 16)
+#define ANA0_HR_MASK		GENMASK(15, 8)
+#define ANA0_RT_MASK		GENMASK(7, 0)
+#define TRIM2_VLSB_MASK		GENMASK(23, 20)
+#define TRIM2_BGR_MASK		GENMASK(19, 16)
+#define TRIM2_BJT_CUR_MASK	GENMASK(15, 12)
+#define TRIM2_BUF_SLOP_SEL_MASK	GENMASK(11, 8)
+#define TRIM2_BUF_VERF_SEL_MASK	GENMASK(7, 6)
+#define TRIM3_TCA25_0_LSB_MASK	GENMASK(31, 28)
+#define TRIM3_TCA40_0_MASK	GENMASK(27, 16)
+#define TRIM4_TCA40_1_MASK	GENMASK(31, 20)
+#define TRIM4_TCA105_0_MASK	GENMASK(19, 8)
+#define TRIM4_TCA25_0_MSB_MASK	GENMASK(7, 0)
+#define TRIM5_TCA105_1_MASK	GENMASK(23, 12)
+#define TRIM5_TCA25_1_MASK	GENMASK(11, 0)
+
 #define VER1_TEMP_LOW_LIMIT	10000
 #define VER2_TEMP_LOW_LIMIT	-40000
 #define VER2_TEMP_HIGH_LIMIT	125000
@@ -65,8 +103,14 @@ static int imx8mm_tmu_get_temp(void *data, int *temp)
 	u32 val;
 
 	val = readl_relaxed(tmu->base + TRITSR) & TRITSR_TEMP0_VAL_MASK;
+
+	/*
+	 * Do not validate against the V bit (bit 31) due to errata
+	 * ERR051272: TMU: Bit 31 of registers TMU_TSCR/TMU_TRITSR/TMU_TRATSR invalid
+	 */
+
 	*temp = val * 1000;
-	if (*temp < VER1_TEMP_LOW_LIMIT)
+	if (*temp < VER1_TEMP_LOW_LIMIT || *temp > VER2_TEMP_HIGH_LIMIT)
 		return -EAGAIN;
 
 	return 0;
@@ -128,6 +172,129 @@ static void imx8mm_tmu_probe_sel_all(struct imx8mm_tmu *tmu)
 	writel_relaxed(val, tmu->base + TPS);
 }
 
+static int imx8mm_tmu_probe_set_calib_v1(struct platform_device *pdev,
+					 struct imx8mm_tmu *tmu)
+{
+	struct device *dev = &pdev->dev;
+	u32 ana0;
+	int ret;
+
+	ret = nvmem_cell_read_u32(&pdev->dev, "calib", &ana0);
+	if (ret) {
+		dev_warn(dev, "Failed to read OCOTP nvmem cell (%d).\n", ret);
+		return ret;
+	}
+
+	writel(FIELD_PREP(TASR_BUF_VREF_MASK,
+			  FIELD_GET(ANA0_BUF_VREF_MASK, ana0)) |
+	       FIELD_PREP(TASR_BUF_SLOPE_MASK,
+			  FIELD_GET(ANA0_BUF_SLOPE_MASK, ana0)),
+	       tmu->base + TASR);
+
+	writel(FIELD_PREP(TCALIV_RT_MASK, FIELD_GET(ANA0_RT_MASK, ana0)) |
+	       FIELD_PREP(TCALIV_HR_MASK, FIELD_GET(ANA0_HR_MASK, ana0)) |
+	       ((ana0 & ANA0_EN) ? TCALIV_EN : 0),
+	       tmu->base + TCALIV(0));
+
+	return 0;
+}
+
+static int imx8mm_tmu_probe_set_calib_v2(struct platform_device *pdev,
+					 struct imx8mm_tmu *tmu)
+{
+	struct device *dev = &pdev->dev;
+	struct nvmem_cell *cell;
+	u32 trim[4] = { 0 };
+	size_t len;
+	void *buf;
+
+	cell = nvmem_cell_get(dev, "calib");
+	if (IS_ERR(cell))
+		return PTR_ERR(cell);
+
+	buf = nvmem_cell_read(cell, &len);
+	nvmem_cell_put(cell);
+
+	if (IS_ERR(buf))
+		return PTR_ERR(buf);
+
+	memcpy(trim, buf, min(len, sizeof(trim)));
+	kfree(buf);
+
+	if (len != 16) {
+		dev_err(dev,
+			"OCOTP nvmem cell length is %zu, must be 16.\n", len);
+		return -EINVAL;
+	}
+
+	/* Blank sample hardware */
+	if (!trim[0] && !trim[1] && !trim[2] && !trim[3]) {
+		/* Use a default 25C binary codes */
+		writel(FIELD_PREP(TCALIV_SNSR25C_MASK, 0x63c),
+		       tmu->base + TCALIV(0));
+		writel(FIELD_PREP(TCALIV_SNSR25C_MASK, 0x63c),
+		       tmu->base + TCALIV(1));
+		return 0;
+	}
+
+	writel(FIELD_PREP(TASR_BUF_VERF_SEL_MASK,
+			  FIELD_GET(TRIM2_BUF_VERF_SEL_MASK, trim[0])) |
+	       FIELD_PREP(TASR_BUF_SLOPE_MASK,
+			  FIELD_GET(TRIM2_BUF_SLOP_SEL_MASK, trim[0])),
+	       tmu->base + TASR);
+
+	writel(FIELD_PREP(TRIM_BJT_CUR_MASK,
+			  FIELD_GET(TRIM2_BJT_CUR_MASK, trim[0])) |
+	       FIELD_PREP(TRIM_BGR_MASK, FIELD_GET(TRIM2_BGR_MASK, trim[0])) |
+	       FIELD_PREP(TRIM_VLSB_MASK, FIELD_GET(TRIM2_VLSB_MASK, trim[0])) |
+	       TRIM_EN_CH,
+	       tmu->base + TRIM);
+
+	writel(FIELD_PREP(TCALIV_SNSR25C_MASK,
+			  FIELD_GET(TRIM3_TCA25_0_LSB_MASK, trim[1]) |
+			  (FIELD_GET(TRIM4_TCA25_0_MSB_MASK, trim[2]) << 4)) |
+	       FIELD_PREP(TCALIV_SNSR105C_MASK,
+			  FIELD_GET(TRIM4_TCA105_0_MASK, trim[2])),
+	       tmu->base + TCALIV(0));
+
+	writel(FIELD_PREP(TCALIV_SNSR25C_MASK,
+			  FIELD_GET(TRIM5_TCA25_1_MASK, trim[3])) |
+	       FIELD_PREP(TCALIV_SNSR105C_MASK,
+			  FIELD_GET(TRIM5_TCA105_1_MASK, trim[3])),
+	       tmu->base + TCALIV(1));
+
+	writel(FIELD_PREP(TCALIV_SNSR25C_MASK,
+			  FIELD_GET(TRIM3_TCA40_0_MASK, trim[1])) |
+	       FIELD_PREP(TCALIV_SNSR105C_MASK,
+			  FIELD_GET(TRIM4_TCA40_1_MASK, trim[2])),
+	       tmu->base + TCALIV(2));
+
+	return 0;
+}
+
+static int imx8mm_tmu_probe_set_calib(struct platform_device *pdev,
+				      struct imx8mm_tmu *tmu)
+{
+	struct device *dev = &pdev->dev;
+
+	/*
+	 * Lack of calibration data OCOTP reference is not considered
+	 * fatal to retain compatibility with old DTs. It is however
+	 * strongly recommended to update such old DTs to get correct
+	 * temperature compensation values for each SoC.
+	 */
+	if (!of_find_property(pdev->dev.of_node, "nvmem-cells", NULL)) {
+		dev_warn(dev,
+			 "No OCOTP nvmem reference found, SoC-specific calibration not loaded. Please update your DT.\n");
+		return 0;
+	}
+
+	if (tmu->socdata->version == TMU_VER1)
+		return imx8mm_tmu_probe_set_calib_v1(pdev, tmu);
+
+	return imx8mm_tmu_probe_set_calib_v2(pdev, tmu);
+}
+
 static int imx8mm_tmu_probe(struct platform_device *pdev)
 {
 	const struct thermal_soc_data *data;
@@ -176,10 +343,17 @@ static int imx8mm_tmu_probe(struct platform_device *pdev)
 			goto disable_clk;
 		}
 		tmu->sensors[i].hw_id = i;
+
+		if (devm_thermal_add_hwmon_sysfs(tmu->sensors[i].tzd))
+			dev_warn(&pdev->dev, "failed to add hwmon sysfs attributes\n");
 	}
 
 	platform_set_drvdata(pdev, tmu);
 
+	ret = imx8mm_tmu_probe_set_calib(pdev, tmu);
+	if (ret)
+		goto disable_clk;
+
 	/* enable all the probes for V2 TMU */
 	if (tmu->socdata->version == TMU_VER2)
 		imx8mm_tmu_probe_sel_all(tmu);
diff --git a/drivers/thermal/imx_sc_thermal.c b/drivers/thermal/imx_sc_thermal.c
index 5d92b70a5d53..4df925e3a80b 100644
--- a/drivers/thermal/imx_sc_thermal.c
+++ b/drivers/thermal/imx_sc_thermal.c
@@ -127,11 +127,6 @@ static int imx_sc_thermal_probe(struct platform_device *pdev)
 	return 0;
 }
 
-static int imx_sc_thermal_remove(struct platform_device *pdev)
-{
-	return 0;
-}
-
 static int imx_sc_sensors[] = { IMX_SC_R_SYSTEM, IMX_SC_R_PMIC_0, -1 };
 
 static const struct of_device_id imx_sc_thermal_table[] = {
@@ -142,7 +137,6 @@ MODULE_DEVICE_TABLE(of, imx_sc_thermal_table);
 
 static struct platform_driver imx_sc_thermal_driver = {
 		.probe = imx_sc_thermal_probe,
-		.remove	= imx_sc_thermal_remove,
 		.driver = {
 			.name = "imx-sc-thermal",
 			.of_match_table = imx_sc_thermal_table,
diff --git a/drivers/thermal/k3_j72xx_bandgap.c b/drivers/thermal/k3_j72xx_bandgap.c
index 16b6bcf1bf4f..031ea1091909 100644
--- a/drivers/thermal/k3_j72xx_bandgap.c
+++ b/drivers/thermal/k3_j72xx_bandgap.c
@@ -177,7 +177,6 @@ struct k3_j72xx_bandgap {
 	struct device *dev;
 	void __iomem *base;
 	void __iomem *cfg2_base;
-	void __iomem *fuse_base;
 	struct k3_thermal_data *ts_data[K3_VTM_MAX_NUM_TS];
 };
 
@@ -249,14 +248,7 @@ static inline int k3_bgp_read_temp(struct k3_thermal_data *devdata,
 /* Get temperature callback function for thermal zone */
 static int k3_thermal_get_temp(struct thermal_zone_device *tz, int *temp)
 {
-	struct k3_thermal_data *data = tz->devdata;
-	int ret = 0;
-
-	ret = k3_bgp_read_temp(data, temp);
-	if (ret)
-		return ret;
-
-	return ret;
+	return k3_bgp_read_temp(tz->devdata, temp);
 }
 
 static const struct thermal_zone_device_ops k3_of_thermal_ops = {
@@ -283,7 +275,7 @@ static int k3_j72xx_bandgap_temp_to_adc_code(int temp)
 }
 
 static void get_efuse_values(int id, struct k3_thermal_data *data, int *err,
-			     struct k3_j72xx_bandgap *bgp)
+			     void __iomem *fuse_base)
 {
 	int i, tmp, pow;
 	int ct_offsets[5][K3_VTM_CORRECTION_TEMP_CNT] = {
@@ -305,16 +297,16 @@ static void get_efuse_values(int id, struct k3_thermal_data *data, int *err,
 		/* Extract the offset value using bit-mask */
 		if (ct_offsets[id][i] == -1 && i == 1) {
 			/* 25C offset Case of Sensor 2 split between 2 regs */
-			tmp = (readl(bgp->fuse_base + 0x8) & 0xE0000000) >> (29);
-			tmp |= ((readl(bgp->fuse_base + 0xC) & 0x1F) << 3);
+			tmp = (readl(fuse_base + 0x8) & 0xE0000000) >> (29);
+			tmp |= ((readl(fuse_base + 0xC) & 0x1F) << 3);
 			pow = tmp & 0x80;
 		} else if (ct_offsets[id][i] == -1 && i == 2) {
 			/* 125C Case of Sensor 3 split between 2 regs */
-			tmp = (readl(bgp->fuse_base + 0x4) & 0xF8000000) >> (27);
-			tmp |= ((readl(bgp->fuse_base + 0x8) & 0xF) << 5);
+			tmp = (readl(fuse_base + 0x4) & 0xF8000000) >> (27);
+			tmp |= ((readl(fuse_base + 0x8) & 0xF) << 5);
 			pow = tmp & 0x100;
 		} else {
-			tmp = readl(bgp->fuse_base + ct_offsets[id][i]);
+			tmp = readl(fuse_base + ct_offsets[id][i]);
 			tmp &= ct_bm[id][i];
 			tmp = tmp >> __ffs(ct_bm[id][i]);
 
@@ -347,7 +339,7 @@ static void print_look_up_table(struct device *dev, int *ref_table)
 }
 
 struct k3_j72xx_bandgap_data {
-	unsigned int has_errata_i2128;
+	const bool has_errata_i2128;
 };
 
 static int k3_j72xx_bandgap_probe(struct platform_device *pdev)
@@ -358,11 +350,12 @@ static int k3_j72xx_bandgap_probe(struct platform_device *pdev)
 	struct device *dev = &pdev->dev;
 	struct k3_j72xx_bandgap *bgp;
 	struct k3_thermal_data *data;
-	int workaround_needed = 0;
+	bool workaround_needed = false;
 	const struct k3_j72xx_bandgap_data *driver_data;
 	struct thermal_zone_device *ti_thermal;
 	int *ref_table;
 	struct err_values err_vals;
+	void __iomem *fuse_base;
 
 	const s64 golden_factors[] = {
 		-490019999999999936,
@@ -393,15 +386,32 @@ static int k3_j72xx_bandgap_probe(struct platform_device *pdev)
 	if (IS_ERR(bgp->cfg2_base))
 		return PTR_ERR(bgp->cfg2_base);
 
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 2);
-	bgp->fuse_base = devm_ioremap_resource(dev, res);
-	if (IS_ERR(bgp->fuse_base))
-		return PTR_ERR(bgp->fuse_base);
-
 	driver_data = of_device_get_match_data(dev);
 	if (driver_data)
 		workaround_needed = driver_data->has_errata_i2128;
 
+	/*
+	 * Some of TI's J721E SoCs require a software trimming procedure
+	 * for the temperature monitors to function properly. To determine
+	 * if this particular SoC is NOT affected, both bits in the
+	 * WKUP_SPARE_FUSE0[31:30] will be set (0xC0000000) indicating
+	 * when software trimming should NOT be applied.
+	 *
+	 * https://www.ti.com/lit/er/sprz455c/sprz455c.pdf
+	 */
+	if (workaround_needed) {
+		res = platform_get_resource(pdev, IORESOURCE_MEM, 2);
+		fuse_base = devm_ioremap_resource(dev, res);
+		if (IS_ERR(fuse_base))
+			return PTR_ERR(fuse_base);
+
+		if ((readl(fuse_base) & 0xc0000000) == 0xc0000000)
+			workaround_needed = false;
+	}
+
+	dev_dbg(bgp->dev, "Work around %sneeded\n",
+		workaround_needed ? "" : "not ");
+
 	pm_runtime_enable(dev);
 	ret = pm_runtime_get_sync(dev);
 	if (ret < 0) {
@@ -434,13 +444,6 @@ static int k3_j72xx_bandgap_probe(struct platform_device *pdev)
 		goto err_free_ref_table;
 	}
 
-	/* Workaround not needed if bit30/bit31 is set even for J721e */
-	if (workaround_needed && (readl(bgp->fuse_base + 0x0) & 0xc0000000) == 0xc0000000)
-		workaround_needed = false;
-
-	dev_dbg(bgp->dev, "Work around %sneeded\n",
-		workaround_needed ? "not " : "");
-
 	if (!workaround_needed)
 		init_table(5, ref_table, golden_factors);
 	else
@@ -459,7 +462,7 @@ static int k3_j72xx_bandgap_probe(struct platform_device *pdev)
 			err_vals.refs[1] = PLUS30CREF;
 			err_vals.refs[2] = PLUS125CREF;
 			err_vals.refs[3] = PLUS150CREF;
-			get_efuse_values(id, &data[id], err_vals.errs, bgp);
+			get_efuse_values(id, &data[id], err_vals.errs, fuse_base);
 		}
 
 		if (id == 0 && workaround_needed)
@@ -529,11 +532,11 @@ static int k3_j72xx_bandgap_remove(struct platform_device *pdev)
 }
 
 static const struct k3_j72xx_bandgap_data k3_j72xx_bandgap_j721e_data = {
-	.has_errata_i2128 = 1,
+	.has_errata_i2128 = true,
 };
 
 static const struct k3_j72xx_bandgap_data k3_j72xx_bandgap_j7200_data = {
-	.has_errata_i2128 = 0,
+	.has_errata_i2128 = false,
 };
 
 static const struct of_device_id of_k3_j72xx_bandgap_match[] = {
diff --git a/drivers/thermal/qcom/lmh.c b/drivers/thermal/qcom/lmh.c
index d3d9b9fa49e8..4122a51e9874 100644
--- a/drivers/thermal/qcom/lmh.c
+++ b/drivers/thermal/qcom/lmh.c
@@ -45,7 +45,7 @@ static irqreturn_t lmh_handle_irq(int hw_irq, void *data)
 	if (irq)
 		generic_handle_irq(irq);
 
-	return 0;
+	return IRQ_HANDLED;
 }
 
 static void lmh_enable_interrupt(struct irq_data *d)
diff --git a/drivers/thermal/qcom/qcom-spmi-adc-tm5.c b/drivers/thermal/qcom/qcom-spmi-adc-tm5.c
index 1b2c43eab27d..ff47fc9ac9c5 100644
--- a/drivers/thermal/qcom/qcom-spmi-adc-tm5.c
+++ b/drivers/thermal/qcom/qcom-spmi-adc-tm5.c
@@ -678,7 +678,7 @@ static int adc_tm5_register_tzd(struct adc_tm5_chip *adc_tm)
 						    &adc_tm5_thermal_ops);
 		if (IS_ERR(tzd)) {
 			if (PTR_ERR(tzd) == -ENODEV) {
-				dev_warn(adc_tm->dev, "thermal sensor on channel %d is not used\n",
+				dev_dbg(adc_tm->dev, "thermal sensor on channel %d is not used\n",
 					 adc_tm->channels[i].channel);
 				continue;
 			}
@@ -1030,10 +1030,8 @@ static int adc_tm5_probe(struct platform_device *pdev)
 		return irq;
 
 	ret = adc_tm5_get_dt_data(adc_tm, node);
-	if (ret) {
-		dev_err(dev, "get dt data failed: %d\n", ret);
-		return ret;
-	}
+	if (ret)
+		return dev_err_probe(dev, ret, "get dt data failed\n");
 
 	ret = adc_tm->data->init(adc_tm);
 	if (ret) {
diff --git a/drivers/thermal/qcom/qcom-spmi-temp-alarm.c b/drivers/thermal/qcom/qcom-spmi-temp-alarm.c
index be785ab37e53..ad84978109e6 100644
--- a/drivers/thermal/qcom/qcom-spmi-temp-alarm.c
+++ b/drivers/thermal/qcom/qcom-spmi-temp-alarm.c
@@ -252,7 +252,8 @@ static int qpnp_tm_update_critical_trip_temp(struct qpnp_tm_chip *chip,
 			disable_s2_shutdown = true;
 		else
 			dev_warn(chip->dev,
-				 "No ADC is configured and critical temperature is above the maximum stage 2 threshold of 140 C! Configuring stage 2 shutdown at 140 C.\n");
+				 "No ADC is configured and critical temperature %d mC is above the maximum stage 2 threshold of %ld mC! Configuring stage 2 shutdown at %ld mC.\n",
+				 temp, stage2_threshold_max, stage2_threshold_max);
 	}
 
 skip:
diff --git a/drivers/thermal/qcom/tsens-8960.c b/drivers/thermal/qcom/tsens-8960.c
index 67c1748cdf73..4585904fb380 100644
--- a/drivers/thermal/qcom/tsens-8960.c
+++ b/drivers/thermal/qcom/tsens-8960.c
@@ -269,9 +269,12 @@ static const struct tsens_ops ops_8960 = {
 static struct tsens_features tsens_8960_feat = {
 	.ver_major	= VER_0,
 	.crit_int	= 0,
+	.combo_int	= 0,
 	.adc		= 1,
 	.srot_split	= 0,
 	.max_sensors	= 11,
+	.trip_min_temp	= -40000,
+	.trip_max_temp	= 120000,
 };
 
 struct tsens_plat_data data_8960 = {
diff --git a/drivers/thermal/qcom/tsens-v0_1.c b/drivers/thermal/qcom/tsens-v0_1.c
index 327f37202c69..04d012e4f728 100644
--- a/drivers/thermal/qcom/tsens-v0_1.c
+++ b/drivers/thermal/qcom/tsens-v0_1.c
@@ -539,9 +539,12 @@ static int calibrate_9607(struct tsens_priv *priv)
 static struct tsens_features tsens_v0_1_feat = {
 	.ver_major	= VER_0_1,
 	.crit_int	= 0,
+	.combo_int	= 0,
 	.adc		= 1,
 	.srot_split	= 1,
 	.max_sensors	= 11,
+	.trip_min_temp	= -40000,
+	.trip_max_temp	= 120000,
 };
 
 static const struct reg_field tsens_v0_1_regfields[MAX_REGFIELDS] = {
diff --git a/drivers/thermal/qcom/tsens-v1.c b/drivers/thermal/qcom/tsens-v1.c
index 573e261ccca7..1d7f8a80bd13 100644
--- a/drivers/thermal/qcom/tsens-v1.c
+++ b/drivers/thermal/qcom/tsens-v1.c
@@ -302,9 +302,12 @@ static int calibrate_8976(struct tsens_priv *priv)
 static struct tsens_features tsens_v1_feat = {
 	.ver_major	= VER_1_X,
 	.crit_int	= 0,
+	.combo_int	= 0,
 	.adc		= 1,
 	.srot_split	= 1,
 	.max_sensors	= 11,
+	.trip_min_temp	= -40000,
+	.trip_max_temp	= 120000,
 };
 
 static const struct reg_field tsens_v1_regfields[MAX_REGFIELDS] = {
diff --git a/drivers/thermal/qcom/tsens-v2.c b/drivers/thermal/qcom/tsens-v2.c
index b293ed32174b..29a61d2d6ca3 100644
--- a/drivers/thermal/qcom/tsens-v2.c
+++ b/drivers/thermal/qcom/tsens-v2.c
@@ -31,9 +31,23 @@
 static struct tsens_features tsens_v2_feat = {
 	.ver_major	= VER_2_X,
 	.crit_int	= 1,
+	.combo_int	= 0,
 	.adc		= 0,
 	.srot_split	= 1,
 	.max_sensors	= 16,
+	.trip_min_temp	= -40000,
+	.trip_max_temp	= 120000,
+};
+
+static struct tsens_features ipq8074_feat = {
+	.ver_major	= VER_2_X,
+	.crit_int	= 1,
+	.combo_int	= 1,
+	.adc		= 0,
+	.srot_split	= 1,
+	.max_sensors	= 16,
+	.trip_min_temp	= 0,
+	.trip_max_temp	= 204000,
 };
 
 static const struct reg_field tsens_v2_regfields[MAX_REGFIELDS] = {
@@ -101,6 +115,12 @@ struct tsens_plat_data data_tsens_v2 = {
 	.fields	= tsens_v2_regfields,
 };
 
+struct tsens_plat_data data_ipq8074 = {
+	.ops		= &ops_generic_v2,
+	.feat		= &ipq8074_feat,
+	.fields	= tsens_v2_regfields,
+};
+
 /* Kept around for backward compatibility with old msm8996.dtsi */
 struct tsens_plat_data data_8996 = {
 	.num_sensors	= 13,
diff --git a/drivers/thermal/qcom/tsens.c b/drivers/thermal/qcom/tsens.c
index b1b10005fb28..b5b136ff323f 100644
--- a/drivers/thermal/qcom/tsens.c
+++ b/drivers/thermal/qcom/tsens.c
@@ -532,6 +532,27 @@ static irqreturn_t tsens_irq_thread(int irq, void *data)
 	return IRQ_HANDLED;
 }
 
+/**
+ * tsens_combined_irq_thread() - Threaded interrupt handler for combined interrupts
+ * @irq: irq number
+ * @data: tsens controller private data
+ *
+ * Handle the combined interrupt as if it were 2 separate interrupts, so call the
+ * critical handler first and then the up/low one.
+ *
+ * Return: IRQ_HANDLED
+ */
+static irqreturn_t tsens_combined_irq_thread(int irq, void *data)
+{
+	irqreturn_t ret;
+
+	ret = tsens_critical_irq_thread(irq, data);
+	if (ret != IRQ_HANDLED)
+		return ret;
+
+	return tsens_irq_thread(irq, data);
+}
+
 static int tsens_set_trips(struct thermal_zone_device *tz, int low, int high)
 {
 	struct tsens_sensor *s = tz->devdata;
@@ -552,8 +573,8 @@ static int tsens_set_trips(struct thermal_zone_device *tz, int low, int high)
 	dev_dbg(dev, "[%u] %s: proposed thresholds: (%d:%d)\n",
 		hw_id, __func__, low, high);
 
-	cl_high = clamp_val(high, -40000, 120000);
-	cl_low  = clamp_val(low, -40000, 120000);
+	cl_high = clamp_val(high, priv->feat->trip_min_temp, priv->feat->trip_max_temp);
+	cl_low  = clamp_val(low, priv->feat->trip_min_temp, priv->feat->trip_max_temp);
 
 	high_val = tsens_mC_to_hw(s, cl_high);
 	low_val  = tsens_mC_to_hw(s, cl_low);
@@ -692,7 +713,7 @@ static int dbg_version_show(struct seq_file *s, void *data)
 			return ret;
 		seq_printf(s, "%d.%d.%d\n", maj_ver, min_ver, step_ver);
 	} else {
-		seq_puts(s, "0.1.0\n");
+		seq_printf(s, "0.%d.0\n", priv->feat->ver_major);
 	}
 
 	return 0;
@@ -704,21 +725,14 @@ DEFINE_SHOW_ATTRIBUTE(dbg_sensors);
 static void tsens_debug_init(struct platform_device *pdev)
 {
 	struct tsens_priv *priv = platform_get_drvdata(pdev);
-	struct dentry *root, *file;
 
-	root = debugfs_lookup("tsens", NULL);
-	if (!root)
+	priv->debug_root = debugfs_lookup("tsens", NULL);
+	if (!priv->debug_root)
 		priv->debug_root = debugfs_create_dir("tsens", NULL);
-	else
-		priv->debug_root = root;
-
-	file = debugfs_lookup("version", priv->debug_root);
-	if (!file)
-		debugfs_create_file("version", 0444, priv->debug_root,
-				    pdev, &dbg_version_fops);
 
 	/* A directory for each instance of the TSENS IP */
 	priv->debug = debugfs_create_dir(dev_name(&pdev->dev), priv->debug_root);
+	debugfs_create_file("version", 0444, priv->debug, pdev, &dbg_version_fops);
 	debugfs_create_file("sensors", 0444, priv->debug, pdev, &dbg_sensors_fops);
 }
 #else
@@ -918,8 +932,6 @@ int __init init_common(struct tsens_priv *priv)
 	if (tsens_version(priv) >= VER_0_1)
 		tsens_enable_irq(priv);
 
-	tsens_debug_init(op);
-
 err_put_device:
 	put_device(&op->dev);
 	return ret;
@@ -960,6 +972,9 @@ static const struct of_device_id tsens_table[] = {
 		.compatible = "qcom,ipq8064-tsens",
 		.data = &data_8960,
 	}, {
+		.compatible = "qcom,ipq8074-tsens",
+		.data = &data_ipq8074,
+	}, {
 		.compatible = "qcom,mdm9607-tsens",
 		.data = &data_9607,
 	}, {
@@ -1071,13 +1086,18 @@ static int tsens_register(struct tsens_priv *priv)
 				   tsens_mC_to_hw(priv->sensor, 0));
 	}
 
-	ret = tsens_register_irq(priv, "uplow", tsens_irq_thread);
-	if (ret < 0)
-		return ret;
+	if (priv->feat->combo_int) {
+		ret = tsens_register_irq(priv, "combined",
+					 tsens_combined_irq_thread);
+	} else {
+		ret = tsens_register_irq(priv, "uplow", tsens_irq_thread);
+		if (ret < 0)
+			return ret;
 
-	if (priv->feat->crit_int)
-		ret = tsens_register_irq(priv, "critical",
-					 tsens_critical_irq_thread);
+		if (priv->feat->crit_int)
+			ret = tsens_register_irq(priv, "critical",
+						 tsens_critical_irq_thread);
+	}
 
 	return ret;
 }
@@ -1153,7 +1173,11 @@ static int tsens_probe(struct platform_device *pdev)
 		}
 	}
 
-	return tsens_register(priv);
+	ret = tsens_register(priv);
+	if (!ret)
+		tsens_debug_init(pdev);
+
+	return ret;
 }
 
 static int tsens_remove(struct platform_device *pdev)
diff --git a/drivers/thermal/qcom/tsens.h b/drivers/thermal/qcom/tsens.h
index ba05c8233356..899af128855f 100644
--- a/drivers/thermal/qcom/tsens.h
+++ b/drivers/thermal/qcom/tsens.h
@@ -493,19 +493,25 @@ enum regfield_ids {
  * struct tsens_features - Features supported by the IP
  * @ver_major: Major number of IP version
  * @crit_int: does the IP support critical interrupts?
+ * @combo_int: does the IP use one IRQ for up, low and critical thresholds?
  * @adc:      do the sensors only output adc code (instead of temperature)?
  * @srot_split: does the IP neatly splits the register space into SROT and TM,
  *              with SROT only being available to secure boot firmware?
  * @has_watchdog: does this IP support watchdog functionality?
  * @max_sensors: maximum sensors supported by this version of the IP
+ * @trip_min_temp: minimum trip temperature supported by this version of the IP
+ * @trip_max_temp: maximum trip temperature supported by this version of the IP
  */
 struct tsens_features {
 	unsigned int ver_major;
 	unsigned int crit_int:1;
+	unsigned int combo_int:1;
 	unsigned int adc:1;
 	unsigned int srot_split:1;
 	unsigned int has_watchdog:1;
 	unsigned int max_sensors;
+	int trip_min_temp;
+	int trip_max_temp;
 };
 
 /**
@@ -591,6 +597,6 @@ extern struct tsens_plat_data data_8916, data_8939, data_8974, data_9607;
 extern struct tsens_plat_data data_tsens_v1, data_8976;
 
 /* TSENS v2 targets */
-extern struct tsens_plat_data data_8996, data_tsens_v2;
+extern struct tsens_plat_data data_8996, data_ipq8074, data_tsens_v2;
 
 #endif /* __QCOM_TSENS_H__ */
diff --git a/drivers/thermal/st/stm_thermal.c b/drivers/thermal/st/stm_thermal.c
index 78feb802a87d..e7834ccc7976 100644
--- a/drivers/thermal/st/stm_thermal.c
+++ b/drivers/thermal/st/stm_thermal.c
@@ -488,7 +488,6 @@ MODULE_DEVICE_TABLE(of, stm_thermal_of_match);
 static int stm_thermal_probe(struct platform_device *pdev)
 {
 	struct stm_thermal_sensor *sensor;
-	struct resource *res;
 	void __iomem *base;
 	int ret;
 
@@ -506,8 +505,7 @@ static int stm_thermal_probe(struct platform_device *pdev)
 
 	sensor->dev = &pdev->dev;
 
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	base = devm_ioremap_resource(&pdev->dev, res);
+	base = devm_platform_get_and_ioremap_resource(pdev, 0, NULL);
 	if (IS_ERR(base))
 		return PTR_ERR(base);
 
diff --git a/drivers/thermal/thermal_of.c b/drivers/thermal/thermal_of.c
index d4b6335ace15..aacba30bc10c 100644
--- a/drivers/thermal/thermal_of.c
+++ b/drivers/thermal/thermal_of.c
@@ -604,13 +604,15 @@ struct thermal_zone_device *thermal_of_zone_register(struct device_node *sensor,
 	if (IS_ERR(np)) {
 		if (PTR_ERR(np) != -ENODEV)
 			pr_err("Failed to find thermal zone for %pOFn id=%d\n", sensor, id);
-		return ERR_CAST(np);
+		ret = PTR_ERR(np);
+		goto out_kfree_of_ops;
 	}
 
 	trips = thermal_of_trips_init(np, &ntrips);
 	if (IS_ERR(trips)) {
 		pr_err("Failed to find trip points for %pOFn id=%d\n", sensor, id);
-		return ERR_CAST(trips);
+		ret = PTR_ERR(trips);
+		goto out_kfree_of_ops;
 	}
 
 	ret = thermal_of_monitor_init(np, &delay, &pdelay);
@@ -659,6 +661,8 @@ out_kfree_tzp:
 	kfree(tzp);
 out_kfree_trips:
 	kfree(trips);
+out_kfree_of_ops:
+	kfree(of_ops);
 
 	return ERR_PTR(ret);
 }
diff --git a/drivers/thermal/ti-soc-thermal/ti-bandgap.c b/drivers/thermal/ti-soc-thermal/ti-bandgap.c
index 67050a1a5b07..a1c9a1530183 100644
--- a/drivers/thermal/ti-soc-thermal/ti-bandgap.c
+++ b/drivers/thermal/ti-soc-thermal/ti-bandgap.c
@@ -878,7 +878,7 @@ static struct ti_bandgap *ti_bandgap_build(struct platform_device *pdev)
  */
 static const struct soc_device_attribute soc_no_cpu_notifier[] = {
 	{ .machine = "OMAP4430" },
-	{ /* sentinel */ },
+	{ /* sentinel */ }
 };
 
 /***   Device driver call backs   ***/