Merge tag 'linux-watchdog-6.2-rc1' of git://www.linux-watchdog.org/linux-watchdog

Pull watchdog updates from Wim Van Sebroeck:

 - Add Advantech EC watchdog driver

 - Add support for MT6795 Helio X10 watchdog and toprgu

 - Add support for MT8188 watchdog device

 - Remove #ifdef guards for PM related functions

 - Other fixes and improvements

* tag 'linux-watchdog-6.2-rc1' of git://www.linux-watchdog.org/linux-watchdog:
  watchdog: aspeed: Enable pre-timeout interrupt
  watchdog: iTCO_wdt: Set NO_REBOOT if the watchdog is not already running
  watchdog: rn5t618: add support for read out bootstatus
  watchdog: kempld: Remove #ifdef guards for PM related functions
  watchdog: omap: Remove #ifdef guards for PM related functions
  watchdog: twl4030: Remove #ifdef guards for PM related functions
  watchdog: at91rm9200: Remove #ifdef guards for PM related functions
  watchdog: Add Advantech EC watchdog driver
  dt-bindings: watchdog: mediatek,mtk-wdt: Add compatible for MT8173
  dt-bindings: watchdog: mediatek,mtk-wdt: Add compatible for MT6795
  dt-bindings: watchdog: mediatek: Convert mtk-wdt to json-schema
  watchdog: mediatek: mt8188: add wdt support
  dt-bindings: reset: mt8188: add toprgu reset-controller header file
  dt-bindings: watchdog: Add compatible for MediaTek MT8188
  watchdog: mtk_wdt: Add support for MT6795 Helio X10 watchdog and toprgu

12 files changed, 349 insertions, 64 deletions

diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
index b64bc49c7f30..0bc40b763b06 100644
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -1055,6 +1055,13 @@ config ADVANTECH_WDT
 	  feature. More information can be found at
 	  <https://www.advantech.com.tw/products/>
 
+config ADVANTECH_EC_WDT
+	tristate "Advantech Embedded Controller Watchdog Timer"
+	depends on X86
+	help
+		This driver supports Advantech products with ITE based Embedded Controller.
+		It does not support Advantech products with other ECs or without EC.
+
 config ALIM1535_WDT
 	tristate "ALi M1535 PMU Watchdog Timer"
 	depends on X86 && PCI
diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile
index d41e5f830ae7..9cbf6580f16c 100644
--- a/drivers/watchdog/Makefile
+++ b/drivers/watchdog/Makefile
@@ -102,6 +102,7 @@ obj-$(CONFIG_SUNPLUS_WATCHDOG) += sunplus_wdt.o
 # X86 (i386 + ia64 + x86_64) Architecture
 obj-$(CONFIG_ACQUIRE_WDT) += acquirewdt.o
 obj-$(CONFIG_ADVANTECH_WDT) += advantechwdt.o
+obj-$(CONFIG_ADVANTECH_EC_WDT) += advantech_ec_wdt.o
 obj-$(CONFIG_ALIM1535_WDT) += alim1535_wdt.o
 obj-$(CONFIG_ALIM7101_WDT) += alim7101_wdt.o
 obj-$(CONFIG_EBC_C384_WDT) += ebc-c384_wdt.o
diff --git a/drivers/watchdog/advantech_ec_wdt.c b/drivers/watchdog/advantech_ec_wdt.c
new file mode 100644
index 000000000000..7c380f90ca58
--- /dev/null
+++ b/drivers/watchdog/advantech_ec_wdt.c
@@ -0,0 +1,205 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ *	Advantech Embedded Controller Watchdog Driver
+ *
+ *	This driver supports Advantech products with ITE based Embedded Controller.
+ *	It does not support Advantech products with other ECs or without EC.
+ *
+ *	Copyright (C) 2022 Advantech Europe B.V.
+ */
+
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/isa.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/watchdog.h>
+
+#define DRIVER_NAME		"advantech_ec_wdt"
+
+/* EC IO region */
+#define EC_BASE_ADDR		0x299
+#define EC_ADDR_EXTENT		2
+
+/* EC minimum IO access delay in ms */
+#define EC_MIN_DELAY		10
+
+/* EC interface definitions */
+#define EC_ADDR_CMD		(EC_BASE_ADDR + 1)
+#define EC_ADDR_DATA		EC_BASE_ADDR
+#define EC_CMD_EC_PROBE		0x30
+#define EC_CMD_COMM		0x89
+#define EC_CMD_WDT_START	0x28
+#define EC_CMD_WDT_STOP		0x29
+#define EC_CMD_WDT_RESET	0x2A
+#define EC_DAT_EN_DLY_H		0x58
+#define EC_DAT_EN_DLY_L		0x59
+#define EC_DAT_RST_DLY_H	0x5E
+#define EC_DAT_RST_DLY_L	0x5F
+#define EC_MAGIC		0x95
+
+/* module parameters */
+#define MIN_TIME		1
+#define MAX_TIME		6000 /* 100 minutes */
+#define DEFAULT_TIME		60
+
+static unsigned int timeout;
+static ktime_t ec_timestamp;
+
+module_param(timeout, uint, 0);
+MODULE_PARM_DESC(timeout,
+		 "Default Watchdog timer setting (" __MODULE_STRING(DEFAULT_TIME) "s). The range is from " __MODULE_STRING(MIN_TIME) " to " __MODULE_STRING(MAX_TIME) ".");
+
+static void adv_ec_wdt_timing_gate(void)
+{
+	ktime_t time_cur, time_delta;
+
+	/* ensure minimum delay between IO accesses*/
+	time_cur = ktime_get();
+	time_delta = ktime_to_ms(ktime_sub(time_cur, ec_timestamp));
+	if (time_delta < EC_MIN_DELAY) {
+		time_delta = EC_MIN_DELAY - time_delta;
+		usleep_range(time_delta * 1000, (time_delta + 1) * 1000);
+	}
+	ec_timestamp = ktime_get();
+}
+
+static void adv_ec_wdt_outb(unsigned char value, unsigned short port)
+{
+	adv_ec_wdt_timing_gate();
+	outb(value, port);
+}
+
+static unsigned char adv_ec_wdt_inb(unsigned short port)
+{
+	adv_ec_wdt_timing_gate();
+	return inb(port);
+}
+
+static int adv_ec_wdt_ping(struct watchdog_device *wdd)
+{
+	adv_ec_wdt_outb(EC_CMD_WDT_RESET, EC_ADDR_CMD);
+	return 0;
+}
+
+static int adv_ec_wdt_set_timeout(struct watchdog_device *wdd, unsigned int t)
+{
+	unsigned int val;
+
+	/* scale time to EC 100 ms base */
+	val = t * 10;
+
+	/* reset enable delay, just in case it was set by BIOS etc. */
+	adv_ec_wdt_outb(EC_CMD_COMM, EC_ADDR_CMD);
+	adv_ec_wdt_outb(EC_DAT_EN_DLY_H, EC_ADDR_DATA);
+	adv_ec_wdt_outb(0, EC_ADDR_DATA);
+
+	adv_ec_wdt_outb(EC_CMD_COMM, EC_ADDR_CMD);
+	adv_ec_wdt_outb(EC_DAT_EN_DLY_L, EC_ADDR_DATA);
+	adv_ec_wdt_outb(0, EC_ADDR_DATA);
+
+	/* set reset delay */
+	adv_ec_wdt_outb(EC_CMD_COMM, EC_ADDR_CMD);
+	adv_ec_wdt_outb(EC_DAT_RST_DLY_H, EC_ADDR_DATA);
+	adv_ec_wdt_outb(val >> 8, EC_ADDR_DATA);
+
+	adv_ec_wdt_outb(EC_CMD_COMM, EC_ADDR_CMD);
+	adv_ec_wdt_outb(EC_DAT_RST_DLY_L, EC_ADDR_DATA);
+	adv_ec_wdt_outb(val & 0xFF, EC_ADDR_DATA);
+
+	wdd->timeout = t;
+	return 0;
+}
+
+static int adv_ec_wdt_start(struct watchdog_device *wdd)
+{
+	adv_ec_wdt_set_timeout(wdd, wdd->timeout);
+	adv_ec_wdt_outb(EC_CMD_WDT_START, EC_ADDR_CMD);
+
+	return 0;
+}
+
+static int adv_ec_wdt_stop(struct watchdog_device *wdd)
+{
+	adv_ec_wdt_outb(EC_CMD_WDT_STOP, EC_ADDR_CMD);
+
+	return 0;
+}
+
+static const struct watchdog_info adv_ec_wdt_info = {
+	.identity =	DRIVER_NAME,
+	.options =	WDIOF_SETTIMEOUT |
+			WDIOF_MAGICCLOSE |
+			WDIOF_KEEPALIVEPING,
+};
+
+static const struct watchdog_ops adv_ec_wdt_ops = {
+	.owner =	THIS_MODULE,
+	.start =	adv_ec_wdt_start,
+	.stop =		adv_ec_wdt_stop,
+	.ping =		adv_ec_wdt_ping,
+	.set_timeout =	adv_ec_wdt_set_timeout,
+};
+
+static struct watchdog_device adv_ec_wdt_dev = {
+	.info =		&adv_ec_wdt_info,
+	.ops =		&adv_ec_wdt_ops,
+	.min_timeout =	MIN_TIME,
+	.max_timeout =	MAX_TIME,
+	.timeout =	DEFAULT_TIME,
+};
+
+static int adv_ec_wdt_probe(struct device *dev, unsigned int id)
+{
+	if (!devm_request_region(dev, EC_BASE_ADDR, EC_ADDR_EXTENT, dev_name(dev))) {
+		dev_err(dev, "Unable to lock port addresses (0x%X-0x%X)\n",
+			EC_BASE_ADDR, EC_BASE_ADDR + EC_ADDR_EXTENT);
+		return -EBUSY;
+	}
+
+	watchdog_init_timeout(&adv_ec_wdt_dev, timeout, dev);
+	watchdog_stop_on_reboot(&adv_ec_wdt_dev);
+	watchdog_stop_on_unregister(&adv_ec_wdt_dev);
+
+	return devm_watchdog_register_device(dev, &adv_ec_wdt_dev);
+}
+
+static struct isa_driver adv_ec_wdt_driver = {
+	.probe		= adv_ec_wdt_probe,
+	.driver		= {
+	.name		= DRIVER_NAME,
+	},
+};
+
+static int __init adv_ec_wdt_init(void)
+{
+	unsigned int val;
+
+	/* quick probe for EC */
+	if (!request_region(EC_BASE_ADDR, EC_ADDR_EXTENT, DRIVER_NAME))
+		return -EBUSY;
+
+	adv_ec_wdt_outb(EC_CMD_EC_PROBE, EC_ADDR_CMD);
+	val = adv_ec_wdt_inb(EC_ADDR_DATA);
+	release_region(EC_BASE_ADDR, EC_ADDR_EXTENT);
+
+	if (val != EC_MAGIC)
+		return -ENODEV;
+
+	return isa_register_driver(&adv_ec_wdt_driver, 1);
+}
+
+static void __exit adv_ec_wdt_exit(void)
+{
+	isa_unregister_driver(&adv_ec_wdt_driver);
+}
+
+module_init(adv_ec_wdt_init);
+module_exit(adv_ec_wdt_exit);
+
+MODULE_AUTHOR("Thomas Kastner <thomas.kastner@advantech.com>");
+MODULE_DESCRIPTION("Advantech Embedded Controller Watchdog Device Driver");
+MODULE_LICENSE("GPL");
+MODULE_VERSION("20221019");
+MODULE_ALIAS("isa:" DRIVER_NAME);
diff --git a/drivers/watchdog/aspeed_wdt.c b/drivers/watchdog/aspeed_wdt.c
index 0cff2adfbfc9..86b5331bc491 100644
--- a/drivers/watchdog/aspeed_wdt.c
+++ b/drivers/watchdog/aspeed_wdt.c
@@ -5,11 +5,14 @@
  * Joel Stanley <joel@jms.id.au>
  */
 
+#include <linux/bits.h>
 #include <linux/delay.h>
+#include <linux/interrupt.h>
 #include <linux/io.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/of.h>
+#include <linux/of_irq.h>
 #include <linux/platform_device.h>
 #include <linux/watchdog.h>
 
@@ -18,28 +21,41 @@ module_param(nowayout, bool, 0);
 MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default="
 				__MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
 
+struct aspeed_wdt_config {
+	u32 ext_pulse_width_mask;
+	u32 irq_shift;
+	u32 irq_mask;
+};
+
 struct aspeed_wdt {
 	struct watchdog_device	wdd;
 	void __iomem		*base;
 	u32			ctrl;
-};
-
-struct aspeed_wdt_config {
-	u32 ext_pulse_width_mask;
+	const struct aspeed_wdt_config *cfg;
 };
 
 static const struct aspeed_wdt_config ast2400_config = {
 	.ext_pulse_width_mask = 0xff,
+	.irq_shift = 0,
+	.irq_mask = 0,
 };
 
 static const struct aspeed_wdt_config ast2500_config = {
 	.ext_pulse_width_mask = 0xfffff,
+	.irq_shift = 12,
+	.irq_mask = GENMASK(31, 12),
+};
+
+static const struct aspeed_wdt_config ast2600_config = {
+	.ext_pulse_width_mask = 0xfffff,
+	.irq_shift = 0,
+	.irq_mask = GENMASK(31, 10),
 };
 
 static const struct of_device_id aspeed_wdt_of_table[] = {
 	{ .compatible = "aspeed,ast2400-wdt", .data = &ast2400_config },
 	{ .compatible = "aspeed,ast2500-wdt", .data = &ast2500_config },
-	{ .compatible = "aspeed,ast2600-wdt", .data = &ast2500_config },
+	{ .compatible = "aspeed,ast2600-wdt", .data = &ast2600_config },
 	{ },
 };
 MODULE_DEVICE_TABLE(of, aspeed_wdt_of_table);
@@ -58,6 +74,7 @@ MODULE_DEVICE_TABLE(of, aspeed_wdt_of_table);
 #define   WDT_CTRL_RESET_SYSTEM		BIT(1)
 #define   WDT_CTRL_ENABLE		BIT(0)
 #define WDT_TIMEOUT_STATUS	0x10
+#define   WDT_TIMEOUT_STATUS_IRQ		BIT(2)
 #define   WDT_TIMEOUT_STATUS_BOOT_SECONDARY	BIT(1)
 #define WDT_CLEAR_TIMEOUT_STATUS	0x14
 #define   WDT_CLEAR_TIMEOUT_AND_BOOT_CODE_SELECTION	BIT(0)
@@ -160,6 +177,26 @@ static int aspeed_wdt_set_timeout(struct watchdog_device *wdd,
 	return 0;
 }
 
+static int aspeed_wdt_set_pretimeout(struct watchdog_device *wdd,
+				     unsigned int pretimeout)
+{
+	struct aspeed_wdt *wdt = to_aspeed_wdt(wdd);
+	u32 actual = pretimeout * WDT_RATE_1MHZ;
+	u32 s = wdt->cfg->irq_shift;
+	u32 m = wdt->cfg->irq_mask;
+
+	wdd->pretimeout = pretimeout;
+	wdt->ctrl &= ~m;
+	if (pretimeout)
+		wdt->ctrl |= ((actual << s) & m) | WDT_CTRL_WDT_INTR;
+	else
+		wdt->ctrl &= ~WDT_CTRL_WDT_INTR;
+
+	writel(wdt->ctrl, wdt->base + WDT_CTRL);
+
+	return 0;
+}
+
 static int aspeed_wdt_restart(struct watchdog_device *wdd,
 			      unsigned long action, void *data)
 {
@@ -232,6 +269,7 @@ static const struct watchdog_ops aspeed_wdt_ops = {
 	.stop		= aspeed_wdt_stop,
 	.ping		= aspeed_wdt_ping,
 	.set_timeout	= aspeed_wdt_set_timeout,
+	.set_pretimeout = aspeed_wdt_set_pretimeout,
 	.restart	= aspeed_wdt_restart,
 	.owner		= THIS_MODULE,
 };
@@ -243,10 +281,29 @@ static const struct watchdog_info aspeed_wdt_info = {
 	.identity	= KBUILD_MODNAME,
 };
 
+static const struct watchdog_info aspeed_wdt_pretimeout_info = {
+	.options	= WDIOF_KEEPALIVEPING
+			| WDIOF_PRETIMEOUT
+			| WDIOF_MAGICCLOSE
+			| WDIOF_SETTIMEOUT,
+	.identity	= KBUILD_MODNAME,
+};
+
+static irqreturn_t aspeed_wdt_irq(int irq, void *arg)
+{
+	struct watchdog_device *wdd = arg;
+	struct aspeed_wdt *wdt = to_aspeed_wdt(wdd);
+	u32 status = readl(wdt->base + WDT_TIMEOUT_STATUS);
+
+	if (status & WDT_TIMEOUT_STATUS_IRQ)
+		watchdog_notify_pretimeout(wdd);
+
+	return IRQ_HANDLED;
+}
+
 static int aspeed_wdt_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
-	const struct aspeed_wdt_config *config;
 	const struct of_device_id *ofdid;
 	struct aspeed_wdt *wdt;
 	struct device_node *np;
@@ -259,11 +316,33 @@ static int aspeed_wdt_probe(struct platform_device *pdev)
 	if (!wdt)
 		return -ENOMEM;
 
+	np = dev->of_node;
+
+	ofdid = of_match_node(aspeed_wdt_of_table, np);
+	if (!ofdid)
+		return -EINVAL;
+	wdt->cfg = ofdid->data;
+
 	wdt->base = devm_platform_ioremap_resource(pdev, 0);
 	if (IS_ERR(wdt->base))
 		return PTR_ERR(wdt->base);
 
 	wdt->wdd.info = &aspeed_wdt_info;
+
+	if (wdt->cfg->irq_mask) {
+		int irq = platform_get_irq_optional(pdev, 0);
+
+		if (irq > 0) {
+			ret = devm_request_irq(dev, irq, aspeed_wdt_irq,
+					       IRQF_SHARED, dev_name(dev),
+					       wdt);
+			if (ret)
+				return ret;
+
+			wdt->wdd.info = &aspeed_wdt_pretimeout_info;
+		}
+	}
+
 	wdt->wdd.ops = &aspeed_wdt_ops;
 	wdt->wdd.max_hw_heartbeat_ms = WDT_MAX_TIMEOUT_MS;
 	wdt->wdd.parent = dev;
@@ -273,13 +352,6 @@ static int aspeed_wdt_probe(struct platform_device *pdev)
 
 	watchdog_set_nowayout(&wdt->wdd, nowayout);
 
-	np = dev->of_node;
-
-	ofdid = of_match_node(aspeed_wdt_of_table, np);
-	if (!ofdid)
-		return -EINVAL;
-	config = ofdid->data;
-
 	/*
 	 * On clock rates:
 	 *  - ast2400 wdt can run at PCLK, or 1MHz
@@ -331,7 +403,7 @@ static int aspeed_wdt_probe(struct platform_device *pdev)
 		(of_device_is_compatible(np, "aspeed,ast2600-wdt"))) {
 		u32 reg = readl(wdt->base + WDT_RESET_WIDTH);
 
-		reg &= config->ext_pulse_width_mask;
+		reg &= wdt->cfg->ext_pulse_width_mask;
 		if (of_property_read_bool(np, "aspeed,ext-active-high"))
 			reg |= WDT_ACTIVE_HIGH_MAGIC;
 		else
@@ -339,7 +411,7 @@ static int aspeed_wdt_probe(struct platform_device *pdev)
 
 		writel(reg, wdt->base + WDT_RESET_WIDTH);
 
-		reg &= config->ext_pulse_width_mask;
+		reg &= wdt->cfg->ext_pulse_width_mask;
 		if (of_property_read_bool(np, "aspeed,ext-push-pull"))
 			reg |= WDT_PUSH_PULL_MAGIC;
 		else
@@ -349,7 +421,7 @@ static int aspeed_wdt_probe(struct platform_device *pdev)
 	}
 
 	if (!of_property_read_u32(np, "aspeed,ext-pulse-duration", &duration)) {
-		u32 max_duration = config->ext_pulse_width_mask + 1;
+		u32 max_duration = wdt->cfg->ext_pulse_width_mask + 1;
 
 		if (duration == 0 || duration > max_duration) {
 			dev_err(dev, "Invalid pulse duration: %uus\n",
diff --git a/drivers/watchdog/at91rm9200_wdt.c b/drivers/watchdog/at91rm9200_wdt.c
index 6d751eb8191d..5126454bb861 100644
--- a/drivers/watchdog/at91rm9200_wdt.c
+++ b/drivers/watchdog/at91rm9200_wdt.c
@@ -278,8 +278,6 @@ static void at91wdt_shutdown(struct platform_device *pdev)
 	at91_wdt_stop();
 }
 
-#ifdef CONFIG_PM
-
 static int at91wdt_suspend(struct platform_device *pdev, pm_message_t message)
 {
 	at91_wdt_stop();
@@ -293,11 +291,6 @@ static int at91wdt_resume(struct platform_device *pdev)
 	return 0;
 }
 
-#else
-#define at91wdt_suspend NULL
-#define at91wdt_resume	NULL
-#endif
-
 static const struct of_device_id at91_wdt_dt_ids[] = {
 	{ .compatible = "atmel,at91rm9200-wdt" },
 	{ /* sentinel */ }
@@ -308,8 +301,8 @@ static struct platform_driver at91wdt_driver = {
 	.probe		= at91wdt_probe,
 	.remove		= at91wdt_remove,
 	.shutdown	= at91wdt_shutdown,
-	.suspend	= at91wdt_suspend,
-	.resume		= at91wdt_resume,
+	.suspend	= pm_ptr(at91wdt_suspend),
+	.resume		= pm_ptr(at91wdt_resume),
 	.driver		= {
 		.name	= "atmel_st_watchdog",
 		.of_match_table = at91_wdt_dt_ids,
diff --git a/drivers/watchdog/db8500_wdt.c b/drivers/watchdog/db8500_wdt.c
index 6ed8b63d310d..97148ac0aa54 100644
--- a/drivers/watchdog/db8500_wdt.c
+++ b/drivers/watchdog/db8500_wdt.c
@@ -105,7 +105,6 @@ static int db8500_wdt_probe(struct platform_device *pdev)
 	return 0;
 }
 
-#ifdef CONFIG_PM
 static int db8500_wdt_suspend(struct platform_device *pdev,
 			     pm_message_t state)
 {
@@ -130,15 +129,11 @@ static int db8500_wdt_resume(struct platform_device *pdev)
 	}
 	return 0;
 }
-#else
-#define db8500_wdt_suspend NULL
-#define db8500_wdt_resume NULL
-#endif
 
 static struct platform_driver db8500_wdt_driver = {
 	.probe		= db8500_wdt_probe,
-	.suspend	= db8500_wdt_suspend,
-	.resume		= db8500_wdt_resume,
+	.suspend	= pm_ptr(db8500_wdt_suspend),
+	.resume		= pm_ptr(db8500_wdt_resume),
 	.driver		= {
 		.name	= "db8500_wdt",
 	},
diff --git a/drivers/watchdog/iTCO_wdt.c b/drivers/watchdog/iTCO_wdt.c
index 34693f11385f..e937b4dd28be 100644
--- a/drivers/watchdog/iTCO_wdt.c
+++ b/drivers/watchdog/iTCO_wdt.c
@@ -423,14 +423,18 @@ static unsigned int iTCO_wdt_get_timeleft(struct watchdog_device *wd_dev)
 	return time_left;
 }
 
-static void iTCO_wdt_set_running(struct iTCO_wdt_private *p)
+/* Returns true if the watchdog was running */
+static bool iTCO_wdt_set_running(struct iTCO_wdt_private *p)
 {
 	u16 val;
 
-	/* Bit 11: TCO Timer Halt -> 0 = The TCO timer is * enabled */
+	/* Bit 11: TCO Timer Halt -> 0 = The TCO timer is enabled */
 	val = inw(TCO1_CNT(p));
-	if (!(val & BIT(11)))
+	if (!(val & BIT(11))) {
 		set_bit(WDOG_HW_RUNNING, &p->wddev.status);
+		return true;
+	}
+	return false;
 }
 
 /*
@@ -518,9 +522,6 @@ static int iTCO_wdt_probe(struct platform_device *pdev)
 		return -ENODEV;	/* Cannot reset NO_REBOOT bit */
 	}
 
-	/* Set the NO_REBOOT bit to prevent later reboots, just for sure */
-	p->update_no_reboot_bit(p->no_reboot_priv, true);
-
 	if (turn_SMI_watchdog_clear_off >= p->iTCO_version) {
 		/*
 		 * Bit 13: TCO_EN -> 0
@@ -572,7 +573,13 @@ static int iTCO_wdt_probe(struct platform_device *pdev)
 	watchdog_set_drvdata(&p->wddev, p);
 	platform_set_drvdata(pdev, p);
 
-	iTCO_wdt_set_running(p);
+	if (!iTCO_wdt_set_running(p)) {
+		/*
+		 * If the watchdog was not running set NO_REBOOT now to
+		 * prevent later reboots.
+		 */
+		p->update_no_reboot_bit(p->no_reboot_priv, true);
+	}
 
 	/* Check that the heartbeat value is within it's range;
 	   if not reset to the default */
diff --git a/drivers/watchdog/kempld_wdt.c b/drivers/watchdog/kempld_wdt.c
index 40bd518ed873..e6c7a2906680 100644
--- a/drivers/watchdog/kempld_wdt.c
+++ b/drivers/watchdog/kempld_wdt.c
@@ -75,9 +75,7 @@ struct kempld_wdt_data {
 	struct watchdog_device		wdd;
 	unsigned int			pretimeout;
 	struct kempld_wdt_stage		stage[KEMPLD_WDT_MAX_STAGES];
-#ifdef CONFIG_PM
 	u8				pm_status_store;
-#endif
 };
 
 #define DEFAULT_TIMEOUT		30 /* seconds */
@@ -495,7 +493,6 @@ static int kempld_wdt_probe(struct platform_device *pdev)
 	return 0;
 }
 
-#ifdef CONFIG_PM
 /* Disable watchdog if it is active during suspend */
 static int kempld_wdt_suspend(struct platform_device *pdev,
 				pm_message_t message)
@@ -531,18 +528,14 @@ static int kempld_wdt_resume(struct platform_device *pdev)
 	else
 		return kempld_wdt_stop(wdd);
 }
-#else
-#define kempld_wdt_suspend	NULL
-#define kempld_wdt_resume	NULL
-#endif
 
 static struct platform_driver kempld_wdt_driver = {
 	.driver		= {
 		.name	= "kempld-wdt",
 	},
 	.probe		= kempld_wdt_probe,
-	.suspend	= kempld_wdt_suspend,
-	.resume		= kempld_wdt_resume,
+	.suspend	= pm_ptr(kempld_wdt_suspend),
+	.resume		= pm_ptr(kempld_wdt_resume),
 };
 
 module_platform_driver(kempld_wdt_driver);
diff --git a/drivers/watchdog/mtk_wdt.c b/drivers/watchdog/mtk_wdt.c
index e97787536792..3e6212591e69 100644
--- a/drivers/watchdog/mtk_wdt.c
+++ b/drivers/watchdog/mtk_wdt.c
@@ -10,9 +10,11 @@
  */
 
 #include <dt-bindings/reset/mt2712-resets.h>
+#include <dt-bindings/reset/mediatek,mt6795-resets.h>
 #include <dt-bindings/reset/mt7986-resets.h>
 #include <dt-bindings/reset/mt8183-resets.h>
 #include <dt-bindings/reset/mt8186-resets.h>
+#include <dt-bindings/reset/mt8188-resets.h>
 #include <dt-bindings/reset/mt8192-resets.h>
 #include <dt-bindings/reset/mt8195-resets.h>
 #include <linux/delay.h>
@@ -78,6 +80,10 @@ static const struct mtk_wdt_data mt2712_data = {
 	.toprgu_sw_rst_num = MT2712_TOPRGU_SW_RST_NUM,
 };
 
+static const struct mtk_wdt_data mt6795_data = {
+	.toprgu_sw_rst_num = MT6795_TOPRGU_SW_RST_NUM,
+};
+
 static const struct mtk_wdt_data mt7986_data = {
 	.toprgu_sw_rst_num = MT7986_TOPRGU_SW_RST_NUM,
 };
@@ -90,6 +96,10 @@ static const struct mtk_wdt_data mt8186_data = {
 	.toprgu_sw_rst_num = MT8186_TOPRGU_SW_RST_NUM,
 };
 
+static const struct mtk_wdt_data mt8188_data = {
+	.toprgu_sw_rst_num = MT8188_TOPRGU_SW_RST_NUM,
+};
+
 static const struct mtk_wdt_data mt8192_data = {
 	.toprgu_sw_rst_num = MT8192_TOPRGU_SW_RST_NUM,
 };
@@ -426,9 +436,11 @@ static int mtk_wdt_resume(struct device *dev)
 static const struct of_device_id mtk_wdt_dt_ids[] = {
 	{ .compatible = "mediatek,mt2712-wdt", .data = &mt2712_data },
 	{ .compatible = "mediatek,mt6589-wdt" },
+	{ .compatible = "mediatek,mt6795-wdt", .data = &mt6795_data },
 	{ .compatible = "mediatek,mt7986-wdt", .data = &mt7986_data },
 	{ .compatible = "mediatek,mt8183-wdt", .data = &mt8183_data },
 	{ .compatible = "mediatek,mt8186-wdt", .data = &mt8186_data },
+	{ .compatible = "mediatek,mt8188-wdt", .data = &mt8188_data },
 	{ .compatible = "mediatek,mt8192-wdt", .data = &mt8192_data },
 	{ .compatible = "mediatek,mt8195-wdt", .data = &mt8195_data },
 	{ /* sentinel */ }
diff --git a/drivers/watchdog/omap_wdt.c b/drivers/watchdog/omap_wdt.c
index 74d785b2b478..e75aa86f63cb 100644
--- a/drivers/watchdog/omap_wdt.c
+++ b/drivers/watchdog/omap_wdt.c
@@ -316,8 +316,6 @@ static int omap_wdt_remove(struct platform_device *pdev)
 	return 0;
 }
 
-#ifdef	CONFIG_PM
-
 /* REVISIT ... not clear this is the best way to handle system suspend; and
  * it's very inappropriate for selective device suspend (e.g. suspending this
  * through sysfs rather than by stopping the watchdog daemon).  Also, this
@@ -353,11 +351,6 @@ static int omap_wdt_resume(struct platform_device *pdev)
 	return 0;
 }
 
-#else
-#define	omap_wdt_suspend	NULL
-#define	omap_wdt_resume		NULL
-#endif
-
 static const struct of_device_id omap_wdt_of_match[] = {
 	{ .compatible = "ti,omap3-wdt", },
 	{},
@@ -368,8 +361,8 @@ static struct platform_driver omap_wdt_driver = {
 	.probe		= omap_wdt_probe,
 	.remove		= omap_wdt_remove,
 	.shutdown	= omap_wdt_shutdown,
-	.suspend	= omap_wdt_suspend,
-	.resume		= omap_wdt_resume,
+	.suspend	= pm_ptr(omap_wdt_suspend),
+	.resume		= pm_ptr(omap_wdt_resume),
 	.driver		= {
 		.name	= "omap_wdt",
 		.of_match_table = omap_wdt_of_match,
diff --git a/drivers/watchdog/rn5t618_wdt.c b/drivers/watchdog/rn5t618_wdt.c
index 6e524c8e26a8..40d8ebd8c0ac 100644
--- a/drivers/watchdog/rn5t618_wdt.c
+++ b/drivers/watchdog/rn5t618_wdt.c
@@ -144,6 +144,8 @@ static int rn5t618_wdt_probe(struct platform_device *pdev)
 	struct rn5t618 *rn5t618 = dev_get_drvdata(dev->parent);
 	struct rn5t618_wdt *wdt;
 	int min_timeout, max_timeout;
+	int ret;
+	unsigned int val;
 
 	wdt = devm_kzalloc(dev, sizeof(struct rn5t618_wdt), GFP_KERNEL);
 	if (!wdt)
@@ -160,6 +162,16 @@ static int rn5t618_wdt_probe(struct platform_device *pdev)
 	wdt->wdt_dev.timeout = max_timeout;
 	wdt->wdt_dev.parent = dev;
 
+	/* Read out previous power-off factor */
+	ret = regmap_read(wdt->rn5t618->regmap, RN5T618_POFFHIS, &val);
+	if (ret)
+		return ret;
+
+	if (val & RN5T618_POFFHIS_VINDET)
+		wdt->wdt_dev.bootstatus = WDIOF_POWERUNDER;
+	else if (val & RN5T618_POFFHIS_WDG)
+		wdt->wdt_dev.bootstatus = WDIOF_CARDRESET;
+
 	watchdog_set_drvdata(&wdt->wdt_dev, wdt);
 	watchdog_init_timeout(&wdt->wdt_dev, timeout, dev);
 	watchdog_set_nowayout(&wdt->wdt_dev, nowayout);
diff --git a/drivers/watchdog/twl4030_wdt.c b/drivers/watchdog/twl4030_wdt.c
index 36b4a660928d..09d17e20f4a7 100644
--- a/drivers/watchdog/twl4030_wdt.c
+++ b/drivers/watchdog/twl4030_wdt.c
@@ -81,7 +81,6 @@ static int twl4030_wdt_probe(struct platform_device *pdev)
 	return devm_watchdog_register_device(dev, wdt);
 }
 
-#ifdef CONFIG_PM
 static int twl4030_wdt_suspend(struct platform_device *pdev, pm_message_t state)
 {
 	struct watchdog_device *wdt = platform_get_drvdata(pdev);
@@ -99,10 +98,6 @@ static int twl4030_wdt_resume(struct platform_device *pdev)
 
 	return 0;
 }
-#else
-#define twl4030_wdt_suspend        NULL
-#define twl4030_wdt_resume         NULL
-#endif
 
 static const struct of_device_id twl_wdt_of_match[] = {
 	{ .compatible = "ti,twl4030-wdt", },
@@ -112,8 +107,8 @@ MODULE_DEVICE_TABLE(of, twl_wdt_of_match);
 
 static struct platform_driver twl4030_wdt_driver = {
 	.probe		= twl4030_wdt_probe,
-	.suspend	= twl4030_wdt_suspend,
-	.resume		= twl4030_wdt_resume,
+	.suspend	= pm_ptr(twl4030_wdt_suspend),
+	.resume		= pm_ptr(twl4030_wdt_resume),
 	.driver		= {
 		.name		= "twl4030_wdt",
 		.of_match_table	= twl_wdt_of_match,