Merge drm/drm-next into drm-misc-next

Daniel needs -rc2 in drm-misc-next to merge some patches

Signed-off-by: Maxime Ripard <maxime@cerno.tech>

26 files changed, 1741 insertions, 973 deletions

diff --git a/drivers/video/backlight/Kconfig b/drivers/video/backlight/Kconfig
index 87f9fc238d28..d83c87b902c1 100644
--- a/drivers/video/backlight/Kconfig
+++ b/drivers/video/backlight/Kconfig
@@ -182,6 +182,14 @@ config BACKLIGHT_IPAQ_MICRO
 	  computers. Say yes if you have one of the h3100/h3600/h3700
 	  machines.
 
+config BACKLIGHT_KTD253
+	tristate "Backlight Driver for Kinetic KTD253"
+	depends on GPIOLIB || COMPILE_TEST
+	help
+	  Say y to enabled the backlight driver for the Kinetic KTD253
+	  which is a 1-wire GPIO-controlled backlight found in some mobile
+	  phones.
+
 config BACKLIGHT_LM3533
 	tristate "Backlight Driver for LM3533"
 	depends on MFD_LM3533
diff --git a/drivers/video/backlight/Makefile b/drivers/video/backlight/Makefile
index 13463b99f1f9..685f3f1ca4df 100644
--- a/drivers/video/backlight/Makefile
+++ b/drivers/video/backlight/Makefile
@@ -35,6 +35,7 @@ obj-$(CONFIG_BACKLIGHT_GPIO)		+= gpio_backlight.o
 obj-$(CONFIG_BACKLIGHT_HP680)		+= hp680_bl.o
 obj-$(CONFIG_BACKLIGHT_HP700)		+= jornada720_bl.o
 obj-$(CONFIG_BACKLIGHT_IPAQ_MICRO)	+= ipaq_micro_bl.o
+obj-$(CONFIG_BACKLIGHT_KTD253)		+= ktd253-backlight.o
 obj-$(CONFIG_BACKLIGHT_LM3533)		+= lm3533_bl.o
 obj-$(CONFIG_BACKLIGHT_LM3630A)		+= lm3630a_bl.o
 obj-$(CONFIG_BACKLIGHT_LM3639)		+= lm3639_bl.o
diff --git a/drivers/video/backlight/ktd253-backlight.c b/drivers/video/backlight/ktd253-backlight.c
new file mode 100644
index 000000000000..e3fee3f1f582
--- /dev/null
+++ b/drivers/video/backlight/ktd253-backlight.c
@@ -0,0 +1,198 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Backlight driver for the Kinetic KTD253
+ * Based on code and know-how from the Samsung GT-S7710
+ * Gareth Phillips <gareth.phillips@samsung.com>
+ */
+#include <linux/backlight.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/fb.h>
+#include <linux/gpio/consumer.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/limits.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/property.h>
+#include <linux/slab.h>
+
+/* Current ratio is n/32 from 1/32 to 32/32 */
+#define KTD253_MIN_RATIO 1
+#define KTD253_MAX_RATIO 32
+#define KTD253_DEFAULT_RATIO 13
+
+#define KTD253_T_LOW_NS (200 + 10) /* Additional 10ns as safety factor */
+#define KTD253_T_HIGH_NS (200 + 10) /* Additional 10ns as safety factor */
+#define KTD253_T_OFF_MS 3
+
+struct ktd253_backlight {
+	struct device *dev;
+	struct backlight_device *bl;
+	struct gpio_desc *gpiod;
+	u16 ratio;
+};
+
+static int ktd253_backlight_update_status(struct backlight_device *bl)
+{
+	struct ktd253_backlight *ktd253 = bl_get_data(bl);
+	int brightness = backlight_get_brightness(bl);
+	u16 target_ratio;
+	u16 current_ratio = ktd253->ratio;
+	unsigned long flags;
+
+	dev_dbg(ktd253->dev, "new brightness/ratio: %d/32\n", brightness);
+
+	target_ratio = brightness;
+
+	if (target_ratio == current_ratio)
+		/* This is already right */
+		return 0;
+
+	if (target_ratio == 0) {
+		gpiod_set_value_cansleep(ktd253->gpiod, 0);
+		/*
+		 * We need to keep the GPIO low for at least this long
+		 * to actually switch the KTD253 off.
+		 */
+		msleep(KTD253_T_OFF_MS);
+		ktd253->ratio = 0;
+		return 0;
+	}
+
+	if (current_ratio == 0) {
+		gpiod_set_value_cansleep(ktd253->gpiod, 1);
+		ndelay(KTD253_T_HIGH_NS);
+		/* We always fall back to this when we power on */
+		current_ratio = KTD253_MAX_RATIO;
+	}
+
+	/*
+	 * WARNING:
+	 * The loop to set the correct current level is performed
+	 * with interrupts disabled as it is timing critical.
+	 * The maximum number of cycles of the loop is 32
+	 * so the time taken will be (T_LOW_NS + T_HIGH_NS + loop_time) * 32,
+	 */
+	local_irq_save(flags);
+	while (current_ratio != target_ratio) {
+		/*
+		 * These GPIO operations absolutely can NOT sleep so no
+		 * _cansleep suffixes, and no using GPIO expanders on
+		 * slow buses for this!
+		 */
+		gpiod_set_value(ktd253->gpiod, 0);
+		ndelay(KTD253_T_LOW_NS);
+		gpiod_set_value(ktd253->gpiod, 1);
+		ndelay(KTD253_T_HIGH_NS);
+		/* After 1/32 we loop back to 32/32 */
+		if (current_ratio == KTD253_MIN_RATIO)
+			current_ratio = KTD253_MAX_RATIO;
+		else
+			current_ratio--;
+	}
+	local_irq_restore(flags);
+	ktd253->ratio = current_ratio;
+
+	dev_dbg(ktd253->dev, "new ratio set to %d/32\n", target_ratio);
+
+	return 0;
+}
+
+static const struct backlight_ops ktd253_backlight_ops = {
+	.options	= BL_CORE_SUSPENDRESUME,
+	.update_status	= ktd253_backlight_update_status,
+};
+
+static int ktd253_backlight_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct backlight_device *bl;
+	struct ktd253_backlight *ktd253;
+	u32 max_brightness;
+	u32 brightness;
+	int ret;
+
+	ktd253 = devm_kzalloc(dev, sizeof(*ktd253), GFP_KERNEL);
+	if (!ktd253)
+		return -ENOMEM;
+	ktd253->dev = dev;
+
+	ret = device_property_read_u32(dev, "max-brightness", &max_brightness);
+	if (ret)
+		max_brightness = KTD253_MAX_RATIO;
+	if (max_brightness > KTD253_MAX_RATIO) {
+		/* Clamp brightness to hardware max */
+		dev_err(dev, "illegal max brightness specified\n");
+		max_brightness = KTD253_MAX_RATIO;
+	}
+
+	ret = device_property_read_u32(dev, "default-brightness", &brightness);
+	if (ret)
+		brightness = KTD253_DEFAULT_RATIO;
+	if (brightness > max_brightness) {
+		/* Clamp default brightness to max brightness */
+		dev_err(dev, "default brightness exceeds max brightness\n");
+		brightness = max_brightness;
+	}
+
+	if (brightness)
+		/* This will be the default ratio when the KTD253 is enabled */
+		ktd253->ratio = KTD253_MAX_RATIO;
+	else
+		ktd253->ratio = 0;
+
+	ktd253->gpiod = devm_gpiod_get(dev, "enable",
+				       brightness ? GPIOD_OUT_HIGH :
+				       GPIOD_OUT_LOW);
+	if (IS_ERR(ktd253->gpiod)) {
+		ret = PTR_ERR(ktd253->gpiod);
+		if (ret != -EPROBE_DEFER)
+			dev_err(dev, "gpio line missing or invalid.\n");
+		return ret;
+	}
+	gpiod_set_consumer_name(ktd253->gpiod, dev_name(dev));
+
+	bl = devm_backlight_device_register(dev, dev_name(dev), dev, ktd253,
+					    &ktd253_backlight_ops, NULL);
+	if (IS_ERR(bl)) {
+		dev_err(dev, "failed to register backlight\n");
+		return PTR_ERR(bl);
+	}
+	bl->props.max_brightness = max_brightness;
+	/* When we just enable the GPIO line we set max brightness */
+	if (brightness) {
+		bl->props.brightness = brightness;
+		bl->props.power = FB_BLANK_UNBLANK;
+	} else {
+		bl->props.brightness = 0;
+		bl->props.power = FB_BLANK_POWERDOWN;
+	}
+
+	ktd253->bl = bl;
+	platform_set_drvdata(pdev, bl);
+	backlight_update_status(bl);
+
+	return 0;
+}
+
+static const struct of_device_id ktd253_backlight_of_match[] = {
+	{ .compatible = "kinetic,ktd253" },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, ktd253_backlight_of_match);
+
+static struct platform_driver ktd253_backlight_driver = {
+	.driver = {
+		.name = "ktd253-backlight",
+		.of_match_table = ktd253_backlight_of_match,
+	},
+	.probe		= ktd253_backlight_probe,
+};
+module_platform_driver(ktd253_backlight_driver);
+
+MODULE_AUTHOR("Linus Walleij <linus.walleij@linaro.org>");
+MODULE_DESCRIPTION("Kinetic KTD253 Backlight Driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:ktd253-backlight");
diff --git a/drivers/video/backlight/sky81452-backlight.c b/drivers/video/backlight/sky81452-backlight.c
index 0ce181585008..8268ac43d54f 100644
--- a/drivers/video/backlight/sky81452-backlight.c
+++ b/drivers/video/backlight/sky81452-backlight.c
@@ -217,6 +217,7 @@ static struct sky81452_bl_platform_data *sky81452_bl_parse_dt(
 					num_entry);
 		if (ret < 0) {
 			dev_err(dev, "led-sources node is invalid.\n");
+			of_node_put(np);
 			return ERR_PTR(-EINVAL);
 		}
 
diff --git a/drivers/video/backlight/tosa_bl.c b/drivers/video/backlight/tosa_bl.c
index cff5e96fd988..6df6fcd132e3 100644
--- a/drivers/video/backlight/tosa_bl.c
+++ b/drivers/video/backlight/tosa_bl.c
@@ -11,7 +11,7 @@
 #include <linux/device.h>
 #include <linux/spi/spi.h>
 #include <linux/i2c.h>
-#include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
 #include <linux/fb.h>
 #include <linux/backlight.h>
 #include <linux/slab.h>
diff --git a/drivers/video/backlight/tosa_lcd.c b/drivers/video/backlight/tosa_lcd.c
index 113116d3585c..38765544345b 100644
--- a/drivers/video/backlight/tosa_lcd.c
+++ b/drivers/video/backlight/tosa_lcd.c
@@ -12,7 +12,7 @@
 #include <linux/spi/spi.h>
 #include <linux/i2c.h>
 #include <linux/slab.h>
-#include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
 #include <linux/delay.h>
 #include <linux/lcd.h>
 #include <linux/fb.h>
diff --git a/drivers/video/console/Kconfig b/drivers/video/console/Kconfig
index 5e850cc9f891..ee33b8ec62bb 100644
--- a/drivers/video/console/Kconfig
+++ b/drivers/video/console/Kconfig
@@ -22,52 +22,6 @@ config VGA_CONSOLE
 
 	  Say Y.
 
-config VGACON_SOFT_SCROLLBACK
-       bool "Enable Scrollback Buffer in System RAM"
-       depends on VGA_CONSOLE
-       default n
-       help
-	 The scrollback buffer of the standard VGA console is located in
-	 the VGA RAM.  The size of this RAM is fixed and is quite small.
-	 If you require a larger scrollback buffer, this can be placed in
-	 System RAM which is dynamically allocated during initialization.
-	 Placing the scrollback buffer in System RAM will slightly slow
-	 down the console.
-
-	 If you want this feature, say 'Y' here and enter the amount of
-	 RAM to allocate for this buffer.  If unsure, say 'N'.
-
-config VGACON_SOFT_SCROLLBACK_SIZE
-       int "Scrollback Buffer Size (in KB)"
-       depends on VGACON_SOFT_SCROLLBACK
-       range 1 1024
-       default "64"
-       help
-	  Enter the amount of System RAM to allocate for scrollback
-	  buffers of VGA consoles. Each 64KB will give you approximately
-	  16 80x25 screenfuls of scrollback buffer.
-
-config VGACON_SOFT_SCROLLBACK_PERSISTENT_ENABLE_BY_DEFAULT
-	bool "Persistent Scrollback History for each console by default"
-	depends on VGACON_SOFT_SCROLLBACK
-	default n
-	help
-	  Say Y here if the scrollback history should persist by default when
-	  switching between consoles. Otherwise, the scrollback history will be
-	  flushed each time the console is switched. This feature can also be
-	  enabled using the boot command line parameter
-	  'vgacon.scrollback_persistent=1'.
-
-	  This feature might break your tool of choice to flush the scrollback
-	  buffer, e.g. clear(1) will work fine but Debian's clear_console(1)
-	  will be broken, which might cause security issues.
-	  You can use the escape sequence \e[3J instead if this feature is
-	  activated.
-
-	  Note that a buffer of VGACON_SOFT_SCROLLBACK_SIZE is taken for each
-	  created tty device.
-	  So if you use a RAM-constrained system, say N here.
-
 config MDA_CONSOLE
 	depends on !M68K && !PARISC && ISA
 	tristate "MDA text console (dual-headed)"
@@ -165,6 +119,7 @@ config STI_CONSOLE
 	bool "STI text console"
 	depends on PARISC && HAS_IOMEM
 	select FONT_SUPPORT
+	select CRC32
 	default y
 	help
 	  The STI console is the builtin display/keyboard on HP-PARISC
diff --git a/drivers/video/console/newport_con.c b/drivers/video/console/newport_con.c
index 72f146d047d9..d9c682ae0392 100644
--- a/drivers/video/console/newport_con.c
+++ b/drivers/video/console/newport_con.c
@@ -35,12 +35,6 @@
 
 #define FONT_DATA ((unsigned char *)font_vga_8x16.data)
 
-/* borrowed from fbcon.c */
-#define REFCOUNT(fd)	(((int *)(fd))[-1])
-#define FNTSIZE(fd)	(((int *)(fd))[-2])
-#define FNTCHARCNT(fd)	(((int *)(fd))[-3])
-#define FONT_EXTRA_WORDS 3
-
 static unsigned char *font_data[MAX_NR_CONSOLES];
 
 static struct newport_regs *npregs;
@@ -131,6 +125,8 @@ static const struct linux_logo *newport_show_logo(void)
 		npregs->go.hostrw0 = *data++ << 24;
 
 	return logo;
+#else
+	return NULL;
 #endif /* CONFIG_LOGO_SGI_CLUT224 */
 }
 
@@ -522,6 +518,7 @@ static int newport_set_font(int unit, struct console_font *op)
 	FNTSIZE(new_data) = size;
 	FNTCHARCNT(new_data) = op->charcount;
 	REFCOUNT(new_data) = 0;	/* usage counter */
+	FNTSUM(new_data) = 0;
 
 	p = new_data;
 	for (i = 0; i < op->charcount; i++) {
@@ -676,11 +673,6 @@ static bool newport_scroll(struct vc_data *vc, unsigned int t, unsigned int b,
 	return true;
 }
 
-static int newport_set_origin(struct vc_data *vc)
-{
-	return 0;
-}
-
 static void newport_save_screen(struct vc_data *vc) { }
 
 const struct consw newport_con = {
@@ -697,7 +689,6 @@ const struct consw newport_con = {
 	.con_blank	  = newport_blank,
 	.con_font_set	  = newport_font_set,
 	.con_font_default = newport_font_default,
-	.con_set_origin	  = newport_set_origin,
 	.con_save_screen  = newport_save_screen
 };
 
@@ -749,18 +740,6 @@ static struct gio_driver newport_driver = {
 	.probe = newport_probe,
 	.remove = newport_remove,
 };
-
-int __init newport_console_init(void)
-{
-	return gio_register_driver(&newport_driver);
-}
-
-void __exit newport_console_exit(void)
-{
-	gio_unregister_driver(&newport_driver);
-}
-
-module_init(newport_console_init);
-module_exit(newport_console_exit);
+module_driver(newport_driver, gio_register_driver, gio_unregister_driver);
 
 MODULE_LICENSE("GPL");
diff --git a/drivers/video/console/sticon.c b/drivers/video/console/sticon.c
index 21a5c280c8c9..1b451165311c 100644
--- a/drivers/video/console/sticon.c
+++ b/drivers/video/console/sticon.c
@@ -2,7 +2,7 @@
  *  linux/drivers/video/console/sticon.c - console driver using HP's STI firmware
  *
  *	Copyright (C) 2000 Philipp Rumpf <prumpf@tux.org>
- *	Copyright (C) 2002 Helge Deller <deller@gmx.de>
+ *	Copyright (C) 2002-2020 Helge Deller <deller@gmx.de>
  *
  *  Based on linux/drivers/video/vgacon.c and linux/drivers/video/fbcon.c,
  *  which were
@@ -43,6 +43,9 @@
 #include <linux/kd.h>
 #include <linux/selection.h>
 #include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/font.h>
+#include <linux/crc32.h>
 
 #include <asm/io.h>
 
@@ -52,27 +55,15 @@
 #define BLANK 0
 static int vga_is_gfx;
 
-/* this is the sti_struct used for this console */
-static struct sti_struct *sticon_sti;
-
-/* Software scrollback */
-static unsigned long softback_buf, softback_curr;
-static unsigned long softback_in;
-static unsigned long /* softback_top, */ softback_end;
-static int softback_lines;
-
-/* software cursor */
-static int cursor_drawn;
-#define CURSOR_DRAW_DELAY		(1)
-#define DEFAULT_CURSOR_BLINK_RATE	(20)
+#define STI_DEF_FONT	sticon_sti->font
 
-static int vbl_cursor_cnt;
+/* borrowed from fbcon.c */
+#define FNTREFCOUNT(fd)	(fd->refcount)
+#define FNTCRC(fd)	(fd->crc)
+static struct sti_cooked_font *font_data[MAX_NR_CONSOLES];
 
-static inline void cursor_undrawn(void)
-{
-    vbl_cursor_cnt = 0;
-    cursor_drawn = 0;
-}
+/* this is the sti_struct used for this console */
+static struct sti_struct *sticon_sti;
 
 static const char *sticon_startup(void)
 {
@@ -81,61 +72,43 @@ static const char *sticon_startup(void)
 
 static void sticon_putc(struct vc_data *conp, int c, int ypos, int xpos)
 {
-    int redraw_cursor = 0;
-
     if (vga_is_gfx || console_blanked)
 	    return;
 
     if (conp->vc_mode != KD_TEXT)
     	    return;
-#if 0
-    if ((p->cursor_x == xpos) && (p->cursor_y == ypos)) {
-	    cursor_undrawn();
-	    redraw_cursor = 1;
-    }
-#endif
 
-    sti_putc(sticon_sti, c, ypos, xpos);
-
-    if (redraw_cursor)
-	    vbl_cursor_cnt = CURSOR_DRAW_DELAY;
+    sti_putc(sticon_sti, c, ypos, xpos, font_data[conp->vc_num]);
 }
 
 static void sticon_putcs(struct vc_data *conp, const unsigned short *s,
 			 int count, int ypos, int xpos)
 {
-    int redraw_cursor = 0;
-
     if (vga_is_gfx || console_blanked)
 	    return;
 
     if (conp->vc_mode != KD_TEXT)
     	    return;
 
-#if 0
-    if ((p->cursor_y == ypos) && (xpos <= p->cursor_x) &&
-	(p->cursor_x < (xpos + count))) {
-	    cursor_undrawn();
-	    redraw_cursor = 1;
-    }
-#endif
-
     while (count--) {
-	sti_putc(sticon_sti, scr_readw(s++), ypos, xpos++);
+	sti_putc(sticon_sti, scr_readw(s++), ypos, xpos++,
+		 font_data[conp->vc_num]);
     }
-
-    if (redraw_cursor)
-	    vbl_cursor_cnt = CURSOR_DRAW_DELAY;
 }
 
 static void sticon_cursor(struct vc_data *conp, int mode)
 {
     unsigned short car1;
 
+    /* no cursor update if screen is blanked */
+    if (vga_is_gfx || console_blanked)
+	return;
+
     car1 = conp->vc_screenbuf[conp->state.x + conp->state.y * conp->vc_cols];
     switch (mode) {
     case CM_ERASE:
-	sti_putc(sticon_sti, car1, conp->state.y, conp->state.x);
+	sti_putc(sticon_sti, car1, conp->state.y, conp->state.x,
+		 font_data[conp->vc_num]);
 	break;
     case CM_MOVE:
     case CM_DRAW:
@@ -146,7 +119,7 @@ static void sticon_cursor(struct vc_data *conp, int mode)
 	case CUR_TWO_THIRDS:
 	case CUR_BLOCK:
 	    sti_putc(sticon_sti, (car1 & 255) + (0 << 8) + (7 << 11),
-		     conp->state.y, conp->state.x);
+		     conp->state.y, conp->state.x, font_data[conp->vc_num]);
 	    break;
 	}
 	break;
@@ -165,42 +138,164 @@ static bool sticon_scroll(struct vc_data *conp, unsigned int t,
 
     switch (dir) {
     case SM_UP:
-	sti_bmove(sti, t + count, 0, t, 0, b - t - count, conp->vc_cols);
-	sti_clear(sti, b - count, 0, count, conp->vc_cols, conp->vc_video_erase_char);
+	sti_bmove(sti, t + count, 0, t, 0, b - t - count, conp->vc_cols,
+		  font_data[conp->vc_num]);
+	sti_clear(sti, b - count, 0, count, conp->vc_cols,
+		  conp->vc_video_erase_char, font_data[conp->vc_num]);
 	break;
 
     case SM_DOWN:
-	sti_bmove(sti, t, 0, t + count, 0, b - t - count, conp->vc_cols);
-	sti_clear(sti, t, 0, count, conp->vc_cols, conp->vc_video_erase_char);
+	sti_bmove(sti, t, 0, t + count, 0, b - t - count, conp->vc_cols,
+		  font_data[conp->vc_num]);
+	sti_clear(sti, t, 0, count, conp->vc_cols,
+		  conp->vc_video_erase_char, font_data[conp->vc_num]);
 	break;
     }
 
     return false;
 }
 
+static int sticon_set_def_font(int unit, struct console_font *op)
+{
+	if (font_data[unit] != STI_DEF_FONT) {
+		if (--FNTREFCOUNT(font_data[unit]) == 0) {
+			kfree(font_data[unit]->raw_ptr);
+			kfree(font_data[unit]);
+		}
+		font_data[unit] = STI_DEF_FONT;
+	}
+
+	return 0;
+}
+
+static int sticon_set_font(struct vc_data *vc, struct console_font *op)
+{
+	struct sti_struct *sti = sticon_sti;
+	int vc_cols, vc_rows, vc_old_cols, vc_old_rows;
+	int unit = vc->vc_num;
+	int w = op->width;
+	int h = op->height;
+	int size, i, bpc, pitch;
+	struct sti_rom_font *new_font;
+	struct sti_cooked_font *cooked_font;
+	unsigned char *data = op->data, *p;
+
+	if ((w < 6) || (h < 6) || (w > 32) || (h > 32)
+	    || (op->charcount != 256 && op->charcount != 512))
+		return -EINVAL;
+	pitch = ALIGN(w, 8) / 8;
+	bpc = pitch * h;
+	size = bpc * op->charcount;
+
+	new_font = kmalloc(sizeof(*new_font) + size, STI_LOWMEM);
+	if (!new_font)
+		return -ENOMEM;
+
+	new_font->first_char = 0;
+	new_font->last_char = op->charcount - 1;
+	new_font->width = w;
+	new_font->height = h;
+	new_font->font_type = STI_FONT_HPROMAN8;
+	new_font->bytes_per_char = bpc;
+	new_font->underline_height = 0;
+	new_font->underline_pos = 0;
+
+	cooked_font = kzalloc(sizeof(*cooked_font), GFP_KERNEL);
+	if (!cooked_font) {
+		kfree(new_font);
+		return -ENOMEM;
+	}
+	cooked_font->raw = new_font;
+	cooked_font->raw_ptr = new_font;
+	cooked_font->width = w;
+	cooked_font->height = h;
+	FNTREFCOUNT(cooked_font) = 0;	/* usage counter */
+
+	p = (unsigned char *) new_font;
+	p += sizeof(*new_font);
+	for (i = 0; i < op->charcount; i++) {
+		memcpy(p, data, bpc);
+		data += pitch*32;
+		p += bpc;
+	}
+	FNTCRC(cooked_font) = crc32(0, new_font, size + sizeof(*new_font));
+	sti_font_convert_bytemode(sti, cooked_font);
+	new_font = cooked_font->raw_ptr;
+
+	/* check if font is already used by other console */
+	for (i = 0; i < MAX_NR_CONSOLES; i++) {
+		if (font_data[i] != STI_DEF_FONT
+		    && (FNTCRC(font_data[i]) == FNTCRC(cooked_font))) {
+			kfree(new_font);
+			kfree(cooked_font);
+			/* current font is the same as the new one */
+			if (i == unit)
+				return 0;
+			cooked_font = font_data[i];
+			new_font = cooked_font->raw_ptr;
+			break;
+		}
+	}
+
+	/* clear screen with old font: we now may have less rows */
+	vc_old_rows = vc->vc_rows;
+	vc_old_cols = vc->vc_cols;
+	sti_clear(sticon_sti, 0, 0, vc_old_rows, vc_old_cols,
+		  vc->vc_video_erase_char, font_data[vc->vc_num]);
+
+	/* delete old font in case it is a user font */
+	sticon_set_def_font(unit, NULL);
+
+	FNTREFCOUNT(cooked_font)++;
+	font_data[unit] = cooked_font;
+
+	vc_cols = sti_onscreen_x(sti) / cooked_font->width;
+	vc_rows = sti_onscreen_y(sti) / cooked_font->height;
+	vc_resize(vc, vc_cols, vc_rows);
+
+	/* need to repaint screen if cols & rows are same as old font */
+	if (vc_cols == vc_old_cols && vc_rows == vc_old_rows)
+		update_screen(vc);
+
+	return 0;
+}
+
+static int sticon_font_default(struct vc_data *vc, struct console_font *op, char *name)
+{
+	return sticon_set_def_font(vc->vc_num, op);
+}
+
+static int sticon_font_set(struct vc_data *vc, struct console_font *font,
+			   unsigned int flags)
+{
+	return sticon_set_font(vc, font);
+}
+
 static void sticon_init(struct vc_data *c, int init)
 {
     struct sti_struct *sti = sticon_sti;
     int vc_cols, vc_rows;
 
     sti_set(sti, 0, 0, sti_onscreen_y(sti), sti_onscreen_x(sti), 0);
-    vc_cols = sti_onscreen_x(sti) / sti->font_width;
-    vc_rows = sti_onscreen_y(sti) / sti->font_height;
+    vc_cols = sti_onscreen_x(sti) / sti->font->width;
+    vc_rows = sti_onscreen_y(sti) / sti->font->height;
     c->vc_can_do_color = 1;
     
     if (init) {
 	c->vc_cols = vc_cols;
 	c->vc_rows = vc_rows;
     } else {
-	/* vc_rows = (c->vc_rows > vc_rows) ? vc_rows : c->vc_rows; */
-	/* vc_cols = (c->vc_cols > vc_cols) ? vc_cols : c->vc_cols; */
 	vc_resize(c, vc_cols, vc_rows);
-/*	vc_resize_con(vc_rows, vc_cols, c->vc_num); */
     }
 }
 
 static void sticon_deinit(struct vc_data *c)
 {
+    int i;
+
+    /* free memory used by user font */
+    for (i = 0; i < MAX_NR_CONSOLES; i++)
+	sticon_set_def_font(i, NULL);
 }
 
 static void sticon_clear(struct vc_data *conp, int sy, int sx, int height,
@@ -209,7 +304,8 @@ static void sticon_clear(struct vc_data *conp, int sy, int sx, int height,
     if (!height || !width)
 	return;
 
-    sti_clear(sticon_sti, sy, sx, height, width, conp->vc_video_erase_char);
+    sti_clear(sticon_sti, sy, sx, height, width,
+	      conp->vc_video_erase_char, font_data[conp->vc_num]);
 }
 
 static int sticon_switch(struct vc_data *conp)
@@ -217,11 +313,6 @@ static int sticon_switch(struct vc_data *conp)
     return 1;	/* needs refreshing */
 }
 
-static int sticon_set_origin(struct vc_data *conp)
-{
-    return 0;
-}
-
 static int sticon_blank(struct vc_data *c, int blank, int mode_switch)
 {
     if (blank == 0) {
@@ -229,65 +320,13 @@ static int sticon_blank(struct vc_data *c, int blank, int mode_switch)
 	    vga_is_gfx = 0;
 	return 1;
     }
-    sticon_set_origin(c);
-    sti_clear(sticon_sti, 0,0, c->vc_rows, c->vc_cols, BLANK);
+    sti_clear(sticon_sti, 0, 0, c->vc_rows, c->vc_cols, BLANK,
+	      font_data[c->vc_num]);
     if (mode_switch)
 	vga_is_gfx = 1;
     return 1;
 }
 
-static u16 *sticon_screen_pos(struct vc_data *conp, int offset)
-{
-    int line;
-    unsigned long p;
-
-    if (conp->vc_num != fg_console || !softback_lines)
-    	return (u16 *)(conp->vc_origin + offset);
-    line = offset / conp->vc_size_row;
-    if (line >= softback_lines)
-    	return (u16 *)(conp->vc_origin + offset - softback_lines * conp->vc_size_row);
-    p = softback_curr + offset;
-    if (p >= softback_end)
-    	p += softback_buf - softback_end;
-    return (u16 *)p;
-}
-
-static unsigned long sticon_getxy(struct vc_data *conp, unsigned long pos,
-				  int *px, int *py)
-{
-    int x, y;
-    unsigned long ret;
-    if (pos >= conp->vc_origin && pos < conp->vc_scr_end) {
-    	unsigned long offset = (pos - conp->vc_origin) / 2;
-    	
-    	x = offset % conp->vc_cols;
-    	y = offset / conp->vc_cols;
-    	if (conp->vc_num == fg_console)
-    	    y += softback_lines;
-    	ret = pos + (conp->vc_cols - x) * 2;
-    } else if (conp->vc_num == fg_console && softback_lines) {
-    	unsigned long offset = pos - softback_curr;
-    	
-    	if (pos < softback_curr)
-    	    offset += softback_end - softback_buf;
-    	offset /= 2;
-    	x = offset % conp->vc_cols;
-    	y = offset / conp->vc_cols;
-	ret = pos + (conp->vc_cols - x) * 2;
-	if (ret == softback_end)
-	    ret = softback_buf;
-	if (ret == softback_in)
-	    ret = conp->vc_origin;
-    } else {
-    	/* Should not happen */
-    	x = y = 0;
-    	ret = conp->vc_origin;
-    }
-    if (px) *px = x;
-    if (py) *py = y;
-    return ret;
-}
-
 static u8 sticon_build_attr(struct vc_data *conp, u8 color,
 			    enum vc_intensity intens,
 			    bool blink, bool underline, bool reverse,
@@ -318,10 +357,6 @@ static void sticon_invert_region(struct vc_data *conp, u16 *p, int count)
     }
 }
 
-static void sticon_save_screen(struct vc_data *conp)
-{
-}
-
 static const struct consw sti_con = {
 	.owner			= THIS_MODULE,
 	.con_startup		= sticon_startup,
@@ -334,19 +369,18 @@ static const struct consw sti_con = {
 	.con_scroll		= sticon_scroll,
 	.con_switch		= sticon_switch,
 	.con_blank		= sticon_blank,
-	.con_set_origin		= sticon_set_origin,
-	.con_save_screen	= sticon_save_screen, 
+	.con_font_set		= sticon_font_set,
+	.con_font_default	= sticon_font_default,
 	.con_build_attr		= sticon_build_attr,
 	.con_invert_region	= sticon_invert_region, 
-	.con_screen_pos		= sticon_screen_pos,
-	.con_getxy		= sticon_getxy,
 };
 
 
 
 static int __init sticonsole_init(void)
 {
-    int err;
+    int err, i;
+
     /* already initialized ? */
     if (sticon_sti)
 	 return 0;
@@ -355,14 +389,16 @@ static int __init sticonsole_init(void)
     if (!sticon_sti)
 	return -ENODEV;
 
-    if (conswitchp == &dummy_con) {
-	printk(KERN_INFO "sticon: Initializing STI text console.\n");
-	console_lock();
-	err = do_take_over_console(&sti_con, 0, MAX_NR_CONSOLES - 1, 1);
-	console_unlock();
-	return err;
-    }
-    return 0;
+    for (i = 0; i < MAX_NR_CONSOLES; i++)
+	font_data[i] = STI_DEF_FONT;
+
+    pr_info("sticon: Initializing STI text console.\n");
+    console_lock();
+    err = do_take_over_console(&sti_con, 0, MAX_NR_CONSOLES - 1,
+		PAGE0->mem_cons.cl_class != CL_DUPLEX);
+    console_unlock();
+
+    return err;
 }
 
 module_init(sticonsole_init);
diff --git a/drivers/video/console/sticore.c b/drivers/video/console/sticore.c
index fade32aa6737..d1bb5915082b 100644
--- a/drivers/video/console/sticore.c
+++ b/drivers/video/console/sticore.c
@@ -4,7 +4,7 @@
  *	core code for console driver using HP's STI firmware
  *
  *	Copyright (C) 2000 Philipp Rumpf <prumpf@tux.org>
- *	Copyright (C) 2001-2013 Helge Deller <deller@gmx.de>
+ *	Copyright (C) 2001-2020 Helge Deller <deller@gmx.de>
  *	Copyright (C) 2001-2002 Thomas Bogendoerfer <tsbogend@alpha.franken.de>
  * 
  * TODO:
@@ -14,6 +14,8 @@
  * 
  */
 
+#define pr_fmt(fmt) "%s: " fmt, KBUILD_MODNAME
+
 #include <linux/module.h>
 #include <linux/types.h>
 #include <linux/kernel.h>
@@ -133,16 +135,17 @@ static const struct sti_font_flags default_font_flags = {
 };
 
 void
-sti_putc(struct sti_struct *sti, int c, int y, int x)
+sti_putc(struct sti_struct *sti, int c, int y, int x,
+	 struct sti_cooked_font *font)
 {
 	struct sti_font_inptr *inptr = &sti->sti_data->font_inptr;
 	struct sti_font_inptr inptr_default = {
-		.font_start_addr= STI_PTR(sti->font->raw),
+		.font_start_addr = STI_PTR(font->raw),
 		.index		= c_index(sti, c),
 		.fg_color	= c_fg(sti, c),
 		.bg_color	= c_bg(sti, c),
-		.dest_x		= x * sti->font_width,
-		.dest_y		= y * sti->font_height,
+		.dest_x		= x * font->width,
+		.dest_y		= y * font->height,
 	};
 	struct sti_font_outptr *outptr = &sti->sti_data->font_outptr;
 	s32 ret;
@@ -193,18 +196,18 @@ sti_set(struct sti_struct *sti, int src_y, int src_x,
 
 void
 sti_clear(struct sti_struct *sti, int src_y, int src_x,
-	  int height, int width, int c)
+	  int height, int width, int c, struct sti_cooked_font *font)
 {
 	struct sti_blkmv_inptr *inptr = &sti->sti_data->blkmv_inptr;
 	struct sti_blkmv_inptr inptr_default = {
 		.fg_color	= c_fg(sti, c),
 		.bg_color	= c_bg(sti, c),
-		.src_x		= src_x * sti->font_width,
-		.src_y		= src_y * sti->font_height,
-		.dest_x		= src_x * sti->font_width,
-		.dest_y		= src_y * sti->font_height,
-		.width		= width * sti->font_width,
-		.height		= height* sti->font_height,
+		.src_x		= src_x * font->width,
+		.src_y		= src_y * font->height,
+		.dest_x		= src_x * font->width,
+		.dest_y		= src_y * font->height,
+		.width		= width * font->width,
+		.height		= height * font->height,
 	};
 	struct sti_blkmv_outptr *outptr = &sti->sti_data->blkmv_outptr;
 	s32 ret;
@@ -225,16 +228,17 @@ static const struct sti_blkmv_flags default_blkmv_flags = {
 
 void
 sti_bmove(struct sti_struct *sti, int src_y, int src_x,
-	  int dst_y, int dst_x, int height, int width)
+	  int dst_y, int dst_x, int height, int width,
+	  struct sti_cooked_font *font)
 {
 	struct sti_blkmv_inptr *inptr = &sti->sti_data->blkmv_inptr;
 	struct sti_blkmv_inptr inptr_default = {
-		.src_x		= src_x * sti->font_width,
-		.src_y		= src_y * sti->font_height,
-		.dest_x		= dst_x * sti->font_width,
-		.dest_y		= dst_y * sti->font_height,
-		.width		= width * sti->font_width,
-		.height		= height* sti->font_height,
+		.src_x		= src_x * font->width,
+		.src_y		= src_y * font->height,
+		.dest_x		= dst_x * font->width,
+		.dest_y		= dst_y * font->height,
+		.width		= width * font->width,
+		.height		= height * font->height,
 	};
 	struct sti_blkmv_outptr *outptr = &sti->sti_data->blkmv_outptr;
 	s32 ret;
@@ -301,36 +305,32 @@ __setup("sti=", sti_setup);
 
 
 
-static char *font_name[MAX_STI_ROMS];
-static int font_index[MAX_STI_ROMS],
-	   font_height[MAX_STI_ROMS],
-	   font_width[MAX_STI_ROMS];
+static char *font_name;
+static int font_index,
+	   font_height,
+	   font_width;
 #ifndef MODULE
 static int sti_font_setup(char *str)
 {
-	char *x;
-	int i = 0;
+	/*
+	 * The default font can be selected in various ways.
+	 * a) sti_font=VGA8x16, sti_font=10x20, sti_font=10*20 selects
+	 *    an built-in Linux framebuffer font.
+	 * b) sti_font=<index>, where index is (1..x) with 1 selecting
+	 *    the first HP STI ROM built-in font..
+	 */
 
-	/* we accept sti_font=VGA8x16, sti_font=10x20, sti_font=10*20 
-	 * or sti_font=7 style command lines. */
+	if (*str >= '0' && *str <= '9') {
+		char *x;
 
-	while (i<MAX_STI_ROMS && str && *str) {
-		if (*str>='0' && *str<='9') {
-			if ((x = strchr(str, 'x')) || (x = strchr(str, '*'))) {
-				font_height[i] = simple_strtoul(str, NULL, 0);
-				font_width[i] = simple_strtoul(x+1, NULL, 0);
-			} else {
-				font_index[i] = simple_strtoul(str, NULL, 0);
-			}
+		if ((x = strchr(str, 'x')) || (x = strchr(str, '*'))) {
+			font_height = simple_strtoul(str, NULL, 0);
+			font_width = simple_strtoul(x+1, NULL, 0);
 		} else {
-			font_name[i] = str;	/* fb font name */
+			font_index = simple_strtoul(str, NULL, 0);
 		}
-
-		if ((x = strchr(str, ',')))
-			*x++ = 0;
-		str = x;
-
-		i++;
+	} else {
+		font_name = str;	/* fb font name */
 	}
 
 	return 1;
@@ -344,7 +344,7 @@ static int sti_font_setup(char *str)
  *		framebuffer font names (e.g. VGA8x16, SUN22x18). 
  *		This is only available if the fonts have been statically compiled 
  *		in with e.g. the CONFIG_FONT_8x16 or CONFIG_FONT_SUN12x22 options.
- *	- sti_font=<number>
+ *	- sti_font=<number>	(<number> = 1,2,3,...)
  *		most STI ROMs have built-in HP specific fonts, which can be selected
  *		by giving the desired number to the sticon driver. 
  *		NOTE: This number is machine and STI ROM dependend.
@@ -364,8 +364,7 @@ static void sti_dump_globcfg(struct sti_glob_cfg *glob_cfg,
 {
 	struct sti_glob_cfg_ext *cfg;
 	
-	DPRINTK((KERN_INFO
-		"%d text planes\n"
+	pr_debug("%d text planes\n"
 		"%4d x %4d screen resolution\n"
 		"%4d x %4d offscreen\n"
 		"%4d x %4d layout\n"
@@ -382,12 +381,11 @@ static void sti_dump_globcfg(struct sti_glob_cfg *glob_cfg,
 		glob_cfg->region_ptrs[4], glob_cfg->region_ptrs[5],
 		glob_cfg->region_ptrs[6], glob_cfg->region_ptrs[7],
 		glob_cfg->reent_lvl,
-		glob_cfg->save_addr));
+		glob_cfg->save_addr);
 
 	/* dump extended cfg */ 
 	cfg = PTR_STI((unsigned long)glob_cfg->ext_ptr);
-	DPRINTK(( KERN_INFO
-		"monitor %d\n"
+	pr_debug("monitor %d\n"
 		"in friendly mode: %d\n"
 		"power consumption %d watts\n"
 		"freq ref %d\n"
@@ -396,20 +394,19 @@ static void sti_dump_globcfg(struct sti_glob_cfg *glob_cfg,
 		cfg->friendly_boot,
 		cfg->power,
 		cfg->freq_ref,
-		cfg->sti_mem_addr, sti_mem_request));
+		cfg->sti_mem_addr, sti_mem_request);
 }
 
 static void sti_dump_outptr(struct sti_struct *sti)
 {
-	DPRINTK((KERN_INFO
-		"%d bits per pixel\n"
+	pr_debug("%d bits per pixel\n"
 		"%d used bits\n"
 		"%d planes\n"
 		"attributes %08x\n",
 		 sti->sti_data->inq_outptr.bits_per_pixel,
 		 sti->sti_data->inq_outptr.bits_used,
 		 sti->sti_data->inq_outptr.planes,
-		 sti->sti_data->inq_outptr.attributes));
+		 sti->sti_data->inq_outptr.attributes);
 }
 
 static int sti_init_glob_cfg(struct sti_struct *sti, unsigned long rom_address,
@@ -448,8 +445,7 @@ static int sti_init_glob_cfg(struct sti_struct *sti, unsigned long rom_address,
 			if (offs != PCI_ROM_ADDRESS &&
 			    (offs < PCI_BASE_ADDRESS_0 ||
 			     offs > PCI_BASE_ADDRESS_5)) {
-				printk (KERN_WARNING
-					"STI pci region mapping for region %d (%02x) can't be mapped\n",
+				pr_warn("STI pci region mapping for region %d (%02x) can't be mapped\n",
 					i,sti->rm_entry[i]);
 				continue;
 			}
@@ -464,14 +460,14 @@ static int sti_init_glob_cfg(struct sti_struct *sti, unsigned long rom_address,
 		if (len)
 			glob_cfg->region_ptrs[i] = sti->regions_phys[i];
 		
-		DPRINTK(("region #%d: phys %08lx, region_ptr %08x, len=%lukB, "
+		pr_debug("region #%d: phys %08lx, region_ptr %08x, len=%lukB, "
 			 "btlb=%d, sysonly=%d, cache=%d, last=%d\n",
 			i, sti->regions_phys[i], glob_cfg->region_ptrs[i],
 			len/1024,
 			sti->regions[i].region_desc.btlb,
 			sti->regions[i].region_desc.sys_only,
 			sti->regions[i].region_desc.cache, 
-			sti->regions[i].region_desc.last));
+			sti->regions[i].region_desc.last);
 
 		/* last entry reached ? */
 		if (sti->regions[i].region_desc.last)
@@ -479,8 +475,8 @@ static int sti_init_glob_cfg(struct sti_struct *sti, unsigned long rom_address,
 	}
 
 	if (++i<8 && sti->regions[i].region)
-		printk(KERN_WARNING "%s: *future ptr (0x%8x) not yet supported !\n",
-				__FILE__, sti->regions[i].region);
+		pr_warn("future ptr (0x%8x) not yet supported !\n",
+			sti->regions[i].region);
 
 	glob_cfg_ext->sti_mem_addr = STI_PTR(sti_mem_addr);
 
@@ -538,6 +534,7 @@ sti_select_fbfont(struct sti_cooked_rom *cooked_rom, const char *fbfont_name)
 	}
 	
 	cooked_font->raw = nf;
+	cooked_font->raw_ptr = nf;
 	cooked_font->next_font = NULL;
 
 	cooked_rom->font_start = cooked_font;
@@ -552,24 +549,38 @@ sti_select_fbfont(struct sti_cooked_rom *cooked_rom, const char *fbfont_name)
 }
 #endif
 
-static struct sti_cooked_font *sti_select_font(struct sti_cooked_rom *rom,
-		int (*search_font_fnc)(struct sti_cooked_rom *, int, int))
+static int sti_search_font(struct sti_cooked_rom *rom, int height, int width)
+{
+	struct sti_cooked_font *font;
+	int i = 0;
+
+	for (font = rom->font_start; font; font = font->next_font, i++) {
+		if ((font->raw->width == width) &&
+		    (font->raw->height == height))
+			return i;
+	}
+	return 0;
+}
+
+static struct sti_cooked_font *sti_select_font(struct sti_cooked_rom *rom)
 {
 	struct sti_cooked_font *font;
 	int i;
-	int index = num_sti_roms;
 
 	/* check for framebuffer-font first */
-	if ((font = sti_select_fbfont(rom, font_name[index])))
-		return font;
+	if (!font_index) {
+		font = sti_select_fbfont(rom, font_name);
+		if (font)
+			return font;
+	}
 
-	if (font_width[index] && font_height[index])
-		font_index[index] = search_font_fnc(rom, 
-				font_height[index], font_width[index]);
+	if (font_width && font_height)
+		font_index = sti_search_font(rom,
+				font_height, font_width);
 
-	for (font = rom->font_start, i = font_index[index];
-	    font && (i > 0);
-	    font = font->next_font, i--);
+	for (font = rom->font_start, i = font_index - 1;
+		font && (i > 0);
+		font = font->next_font, i--);
 
 	if (font)
 		return font;
@@ -578,20 +589,35 @@ static struct sti_cooked_font *sti_select_font(struct sti_cooked_rom *rom,
 }
 
 
-static void sti_dump_rom(struct sti_rom *rom)
+static void sti_dump_rom(struct sti_struct *sti)
 {
-	printk(KERN_INFO "    id %04x-%04x, conforms to spec rev. %d.%02x\n",
+	struct sti_rom *rom = sti->rom->raw;
+	struct sti_cooked_font *font_start;
+	int nr;
+
+	pr_info("  id %04x-%04x, conforms to spec rev. %d.%02x\n",
 		rom->graphics_id[0], 
 		rom->graphics_id[1],
 		rom->revno[0] >> 4, 
 		rom->revno[0] & 0x0f);
-	DPRINTK(("      supports %d monitors\n", rom->num_mons));
-	DPRINTK(("      font start %08x\n", rom->font_start));
-	DPRINTK(("      region list %08x\n", rom->region_list));
-	DPRINTK(("      init_graph %08x\n", rom->init_graph));
-	DPRINTK(("      bus support %02x\n", rom->bus_support));
-	DPRINTK(("      ext bus support %02x\n", rom->ext_bus_support));
-	DPRINTK(("      alternate code type %d\n", rom->alt_code_type));
+	pr_debug("  supports %d monitors\n", rom->num_mons);
+	pr_debug("  font start %08x\n", rom->font_start);
+	pr_debug("  region list %08x\n", rom->region_list);
+	pr_debug("  init_graph %08x\n", rom->init_graph);
+	pr_debug("  bus support %02x\n", rom->bus_support);
+	pr_debug("  ext bus support %02x\n", rom->ext_bus_support);
+	pr_debug("  alternate code type %d\n", rom->alt_code_type);
+
+	font_start = sti->rom->font_start;
+	nr = 0;
+	while (font_start) {
+		struct sti_rom_font *f = font_start->raw;
+
+		pr_info("    built-in font #%d: size %dx%d, chars %d-%d, bpc %d\n", ++nr,
+			f->width, f->height,
+			f->first_char, f->last_char, f->bytes_per_char);
+		font_start = font_start->next_font;
+	}
 }
 
 
@@ -628,39 +654,34 @@ static int sti_cook_fonts(struct sti_cooked_rom *cooked_rom,
 	return 1;
 }
 
-
-static int sti_search_font(struct sti_cooked_rom *rom, int height, int width)
-{
-	struct sti_cooked_font *font;
-	int i = 0;
-	
-	for (font = rom->font_start; font; font = font->next_font, i++) {
-		if ((font->raw->width == width) &&
-		    (font->raw->height == height))
-			return i;
-	}
-	return 0;
-}
-
 #define BMODE_RELOCATE(offset)		offset = (offset) / 4;
 #define BMODE_LAST_ADDR_OFFS		0x50
 
-static void *sti_bmode_font_raw(struct sti_cooked_font *f)
+void sti_font_convert_bytemode(struct sti_struct *sti, struct sti_cooked_font *f)
 {
 	unsigned char *n, *p, *q;
-	int size = f->raw->bytes_per_char*256+sizeof(struct sti_rom_font);
-	
+	int size = f->raw->bytes_per_char * 256 + sizeof(struct sti_rom_font);
+	struct sti_rom_font *old_font;
+
+	if (sti->wordmode)
+		return;
+
+	old_font = f->raw_ptr;
 	n = kcalloc(4, size, STI_LOWMEM);
+	f->raw_ptr = n;
 	if (!n)
-		return NULL;
+		return;
 	p = n + 3;
-	q = (unsigned char *)f->raw;
+	q = (unsigned char *) f->raw;
 	while (size--) {
 		*p = *q++;
-		p+=4;
+		p += 4;
 	}
-	return n + 3;
+	/* store new ptr to byte-mode font and delete old font */
+	f->raw = (struct sti_rom_font *) (n + 3);
+	kfree(old_font);
 }
+EXPORT_SYMBOL(sti_font_convert_bytemode);
 
 static void sti_bmode_rom_copy(unsigned long base, unsigned long count,
 			       void *dest)
@@ -747,7 +768,7 @@ static int sti_read_rom(int wordmode, struct sti_struct *sti,
 		goto out_err;
 
 	if (!sti_cook_fonts(cooked, raw)) {
-		printk(KERN_ERR "No font found for STI at %08lx\n", address);
+		pr_warn("No font found for STI at %08lx\n", address);
 		goto out_err;
 	}
 
@@ -756,7 +777,8 @@ static int sti_read_rom(int wordmode, struct sti_struct *sti,
 
 	address = (unsigned long) STI_PTR(raw);
 
-	pr_info("STI ROM supports 32 %sbit firmware functions.\n",
+	pr_info("STI %s ROM supports 32 %sbit firmware functions.\n",
+		wordmode ? "word mode" : "byte mode",
 		raw->alt_code_type == ALT_CODE_TYPE_PA_RISC_64
 		? "and 64 " : "");
 
@@ -767,18 +789,17 @@ static int sti_read_rom(int wordmode, struct sti_struct *sti,
 
 	sti->rom = cooked;
 	sti->rom->raw = raw;
-	
-	sti->font = sti_select_font(sti->rom, sti_search_font);
-	sti->font_width = sti->font->raw->width;
-	sti->font_height = sti->font->raw->height;
-	if (!wordmode)
-		sti->font->raw = sti_bmode_font_raw(sti->font);
+	sti_dump_rom(sti);
+
+	sti->wordmode = wordmode;
+	sti->font = sti_select_font(sti->rom);
+	sti->font->width = sti->font->raw->width;
+	sti->font->height = sti->font->raw->height;
+	sti_font_convert_bytemode(sti, sti->font);
 
 	sti->sti_mem_request = raw->sti_mem_req;
 	sti->graphics_id[0] = raw->graphics_id[0];
 	sti->graphics_id[1] = raw->graphics_id[1];
-	
-	sti_dump_rom(raw);
 
 	/* check if the ROM routines in this card are compatible */
 	if (wordmode || sti->graphics_id[1] != 0x09A02587)
@@ -804,9 +825,9 @@ ok:
 	return 1;
 
 msg_not_supported:
-	printk(KERN_ERR "Sorry, this GSC/STI card is not yet supported.\n");
-	printk(KERN_ERR "Please see http://parisc-linux.org/faq/"
-			"graphics-howto.html for more info.\n");
+	pr_warn("Sorry, this GSC/STI card is not yet supported.\n");
+	pr_warn("Please see https://parisc.wiki.kernel.org/"
+		"index.php/Graphics_howto for more info.\n");
 	/* fall through */
 out_err:
 	kfree(raw);
@@ -823,7 +844,7 @@ static struct sti_struct *sti_try_rom_generic(unsigned long address,
 	u32 sig;
 
 	if (num_sti_roms >= MAX_STI_ROMS) {
-		printk(KERN_WARNING "maximum number of STI ROMS reached !\n");
+		pr_warn("maximum number of STI ROMS reached !\n");
 		return NULL;
 	}
 	
@@ -849,16 +870,15 @@ test_rom:
 		if (i != 1) {
 			/* The ROM could have multiple architecture 
 			 * dependent images (e.g. i386, parisc,...) */
-			printk(KERN_WARNING 
-				"PCI ROM is not a STI ROM type image (0x%8x)\n", i);
+			pr_warn("PCI ROM is not a STI ROM type image (0x%8x)\n", i);
 			goto out_err;
 		}
 		
 		sti->pd = pd;
 
 		i = gsc_readl(address+0x0c);
-		DPRINTK(("PCI ROM size (from header) = %d kB\n",
-			le16_to_cpu(i>>16)*512/1024));
+		pr_debug("PCI ROM size (from header) = %d kB\n",
+			le16_to_cpu(i>>16)*512/1024);
 		rm_offset = le16_to_cpu(i & 0xffff);
 		if (rm_offset) { 
 			/* read 16 bytes from the pci region mapper array */
@@ -867,29 +887,24 @@ test_rom:
 			*rm++ = gsc_readl(address+rm_offset+0x04);
 			*rm++ = gsc_readl(address+rm_offset+0x08);
 			*rm++ = gsc_readl(address+rm_offset+0x0c);
-			DPRINTK(("PCI region Mapper offset = %08x: ",
-				rm_offset));
-			for (i=0; i<16; i++)
-				DPRINTK(("%02x ", sti->rm_entry[i]));
-			DPRINTK(("\n"));
 		}
 
 		address += le32_to_cpu(gsc_readl(address+8));
-		DPRINTK(("sig %04x, PCI STI ROM at %08lx\n", sig, address));
+		pr_debug("sig %04x, PCI STI ROM at %08lx\n", sig, address);
 		goto test_rom;
 	}
 	
 	ok = 0;
 	
 	if ((sig & 0xff) == 0x01) {
-		DPRINTK(("    byte mode ROM at %08lx, hpa at %08lx\n",
-		       address, hpa));
+		pr_debug("    byte mode ROM at %08lx, hpa at %08lx\n",
+		       address, hpa);
 		ok = sti_read_rom(0, sti, address);
 	}
 
 	if ((sig & 0xffff) == 0x0303) {
-		DPRINTK(("    word mode ROM at %08lx, hpa at %08lx\n",
-		       address, hpa));
+		pr_debug("    word mode ROM at %08lx, hpa at %08lx\n",
+		       address, hpa);
 		ok = sti_read_rom(1, sti, address);
 	}
 
@@ -906,7 +921,7 @@ test_rom:
 		unsigned long rom_base;
 		rom_base = pci_resource_start(sti->pd, PCI_ROM_RESOURCE);	
 		pci_write_config_dword(sti->pd, PCI_ROM_ADDRESS, rom_base & ~PCI_ROM_ADDRESS_ENABLE);
-		DPRINTK((KERN_DEBUG "STI PCI ROM disabled\n"));
+		pr_debug("STI PCI ROM disabled\n");
 	}
 
 	if (sti_init_graph(sti))
@@ -981,14 +996,14 @@ static int sticore_pci_init(struct pci_dev *pd, const struct pci_device_id *ent)
 	rom_len = pci_resource_len(pd, PCI_ROM_RESOURCE);
 	if (rom_base) {
 		pci_write_config_dword(pd, PCI_ROM_ADDRESS, rom_base | PCI_ROM_ADDRESS_ENABLE);
-		DPRINTK((KERN_DEBUG "STI PCI ROM enabled at 0x%08lx\n", rom_base));
+		pr_debug("STI PCI ROM enabled at 0x%08lx\n", rom_base);
 	}
 
-	printk(KERN_INFO "STI PCI graphic ROM found at %08lx (%u kB), fb at %08lx (%u MB)\n",
+	pr_info("STI PCI graphic ROM found at %08lx (%u kB), fb at %08lx (%u MB)\n",
 		rom_base, rom_len/1024, fb_base, fb_len/1024/1024);
 
-	DPRINTK((KERN_DEBUG "Trying PCI STI ROM at %08lx, PCI hpa at %08lx\n",
-		    rom_base, fb_base));
+	pr_debug("Trying PCI STI ROM at %08lx, PCI hpa at %08lx\n",
+		    rom_base, fb_base);
 
 	sti = sti_try_rom_generic(rom_base, fb_base, pd);
 	if (sti) {
@@ -998,8 +1013,7 @@ static int sticore_pci_init(struct pci_dev *pd, const struct pci_device_id *ent)
 	}
 	
 	if (!sti) {
-		printk(KERN_WARNING "Unable to handle STI device '%s'\n",
-			pci_name(pd));
+		pr_warn("Unable to handle STI device '%s'\n", pci_name(pd));
 		return -ENODEV;
 	}
 #endif /* CONFIG_PCI */
@@ -1058,7 +1072,7 @@ static void sti_init_roms(void)
 
 	sticore_initialized = 1;
 
-	printk(KERN_INFO "STI GSC/PCI core graphics driver "
+	pr_info("STI GSC/PCI core graphics driver "
 			STI_DRIVERVERSION "\n");
 
 	/* Register drivers for native & PCI cards */
diff --git a/drivers/video/console/vgacon.c b/drivers/video/console/vgacon.c
index a52bb3740073..17876f0179b5 100644
--- a/drivers/video/console/vgacon.c
+++ b/drivers/video/console/vgacon.c
@@ -165,214 +165,6 @@ static inline void vga_set_mem_top(struct vc_data *c)
 	write_vga(12, (c->vc_visible_origin - vga_vram_base) / 2);
 }
 
-#ifdef CONFIG_VGACON_SOFT_SCROLLBACK
-/* software scrollback */
-struct vgacon_scrollback_info {
-	void *data;
-	int tail;
-	int size;
-	int rows;
-	int cnt;
-	int cur;
-	int save;
-	int restore;
-};
-
-static struct vgacon_scrollback_info *vgacon_scrollback_cur;
-static struct vgacon_scrollback_info vgacon_scrollbacks[MAX_NR_CONSOLES];
-static bool scrollback_persistent = \
-	IS_ENABLED(CONFIG_VGACON_SOFT_SCROLLBACK_PERSISTENT_ENABLE_BY_DEFAULT);
-module_param_named(scrollback_persistent, scrollback_persistent, bool, 0000);
-MODULE_PARM_DESC(scrollback_persistent, "Enable persistent scrollback for all vga consoles");
-
-static void vgacon_scrollback_reset(int vc_num, size_t reset_size)
-{
-	struct vgacon_scrollback_info *scrollback = &vgacon_scrollbacks[vc_num];
-
-	if (scrollback->data && reset_size > 0)
-		memset(scrollback->data, 0, reset_size);
-
-	scrollback->cnt  = 0;
-	scrollback->tail = 0;
-	scrollback->cur  = 0;
-}
-
-static void vgacon_scrollback_init(int vc_num)
-{
-	int pitch = vga_video_num_columns * 2;
-	size_t size = CONFIG_VGACON_SOFT_SCROLLBACK_SIZE * 1024;
-	int rows = size / pitch;
-	void *data;
-
-	data = kmalloc_array(CONFIG_VGACON_SOFT_SCROLLBACK_SIZE, 1024,
-			     GFP_NOWAIT);
-
-	vgacon_scrollbacks[vc_num].data = data;
-	vgacon_scrollback_cur = &vgacon_scrollbacks[vc_num];
-
-	vgacon_scrollback_cur->rows = rows - 1;
-	vgacon_scrollback_cur->size = rows * pitch;
-
-	vgacon_scrollback_reset(vc_num, size);
-}
-
-static void vgacon_scrollback_switch(int vc_num)
-{
-	if (!scrollback_persistent)
-		vc_num = 0;
-
-	if (!vgacon_scrollbacks[vc_num].data) {
-		vgacon_scrollback_init(vc_num);
-	} else {
-		if (scrollback_persistent) {
-			vgacon_scrollback_cur = &vgacon_scrollbacks[vc_num];
-		} else {
-			size_t size = CONFIG_VGACON_SOFT_SCROLLBACK_SIZE * 1024;
-
-			vgacon_scrollback_reset(vc_num, size);
-		}
-	}
-}
-
-static void vgacon_scrollback_startup(void)
-{
-	vgacon_scrollback_cur = &vgacon_scrollbacks[0];
-	vgacon_scrollback_init(0);
-}
-
-static void vgacon_scrollback_update(struct vc_data *c, int t, int count)
-{
-	void *p;
-
-	if (!vgacon_scrollback_cur->data || !vgacon_scrollback_cur->size ||
-	    c->vc_num != fg_console)
-		return;
-
-	p = (void *) (c->vc_origin + t * c->vc_size_row);
-
-	while (count--) {
-		if ((vgacon_scrollback_cur->tail + c->vc_size_row) >
-		    vgacon_scrollback_cur->size)
-			vgacon_scrollback_cur->tail = 0;
-
-		scr_memcpyw(vgacon_scrollback_cur->data +
-			    vgacon_scrollback_cur->tail,
-			    p, c->vc_size_row);
-
-		vgacon_scrollback_cur->cnt++;
-		p += c->vc_size_row;
-		vgacon_scrollback_cur->tail += c->vc_size_row;
-
-		if (vgacon_scrollback_cur->tail >= vgacon_scrollback_cur->size)
-			vgacon_scrollback_cur->tail = 0;
-
-		if (vgacon_scrollback_cur->cnt > vgacon_scrollback_cur->rows)
-			vgacon_scrollback_cur->cnt = vgacon_scrollback_cur->rows;
-
-		vgacon_scrollback_cur->cur = vgacon_scrollback_cur->cnt;
-	}
-}
-
-static void vgacon_restore_screen(struct vc_data *c)
-{
-	c->vc_origin = c->vc_visible_origin;
-	vgacon_scrollback_cur->save = 0;
-
-	if (!vga_is_gfx && !vgacon_scrollback_cur->restore) {
-		scr_memcpyw((u16 *) c->vc_origin, (u16 *) c->vc_screenbuf,
-			    c->vc_screenbuf_size > vga_vram_size ?
-			    vga_vram_size : c->vc_screenbuf_size);
-		vgacon_scrollback_cur->restore = 1;
-		vgacon_scrollback_cur->cur = vgacon_scrollback_cur->cnt;
-	}
-}
-
-static void vgacon_scrolldelta(struct vc_data *c, int lines)
-{
-	int start, end, count, soff;
-
-	if (!lines) {
-		vgacon_restore_screen(c);
-		return;
-	}
-
-	if (!vgacon_scrollback_cur->data)
-		return;
-
-	if (!vgacon_scrollback_cur->save) {
-		vgacon_cursor(c, CM_ERASE);
-		vgacon_save_screen(c);
-		c->vc_origin = (unsigned long)c->vc_screenbuf;
-		vgacon_scrollback_cur->save = 1;
-	}
-
-	vgacon_scrollback_cur->restore = 0;
-	start = vgacon_scrollback_cur->cur + lines;
-	end = start + abs(lines);
-
-	if (start < 0)
-		start = 0;
-
-	if (start > vgacon_scrollback_cur->cnt)
-		start = vgacon_scrollback_cur->cnt;
-
-	if (end < 0)
-		end = 0;
-
-	if (end > vgacon_scrollback_cur->cnt)
-		end = vgacon_scrollback_cur->cnt;
-
-	vgacon_scrollback_cur->cur = start;
-	count = end - start;
-	soff = vgacon_scrollback_cur->tail -
-		((vgacon_scrollback_cur->cnt - end) * c->vc_size_row);
-	soff -= count * c->vc_size_row;
-
-	if (soff < 0)
-		soff += vgacon_scrollback_cur->size;
-
-	count = vgacon_scrollback_cur->cnt - start;
-
-	if (count > c->vc_rows)
-		count = c->vc_rows;
-
-	if (count) {
-		int copysize;
-
-		int diff = c->vc_rows - count;
-		void *d = (void *) c->vc_visible_origin;
-		void *s = (void *) c->vc_screenbuf;
-
-		count *= c->vc_size_row;
-		/* how much memory to end of buffer left? */
-		copysize = min(count, vgacon_scrollback_cur->size - soff);
-		scr_memcpyw(d, vgacon_scrollback_cur->data + soff, copysize);
-		d += copysize;
-		count -= copysize;
-
-		if (count) {
-			scr_memcpyw(d, vgacon_scrollback_cur->data, count);
-			d += count;
-		}
-
-		if (diff)
-			scr_memcpyw(d, s, diff * c->vc_size_row);
-	} else
-		vgacon_cursor(c, CM_MOVE);
-}
-
-static void vgacon_flush_scrollback(struct vc_data *c)
-{
-	size_t size = CONFIG_VGACON_SOFT_SCROLLBACK_SIZE * 1024;
-
-	vgacon_scrollback_reset(c->vc_num, size);
-}
-#else
-#define vgacon_scrollback_startup(...) do { } while (0)
-#define vgacon_scrollback_init(...)    do { } while (0)
-#define vgacon_scrollback_update(...)  do { } while (0)
-#define vgacon_scrollback_switch(...)  do { } while (0)
-
 static void vgacon_restore_screen(struct vc_data *c)
 {
 	if (c->vc_origin != c->vc_visible_origin)
@@ -386,11 +178,6 @@ static void vgacon_scrolldelta(struct vc_data *c, int lines)
 	vga_set_mem_top(c);
 }
 
-static void vgacon_flush_scrollback(struct vc_data *c)
-{
-}
-#endif /* CONFIG_VGACON_SOFT_SCROLLBACK */
-
 static const char *vgacon_startup(void)
 {
 	const char *display_desc = NULL;
@@ -573,10 +360,7 @@ static const char *vgacon_startup(void)
 	vgacon_xres = screen_info.orig_video_cols * VGA_FONTWIDTH;
 	vgacon_yres = vga_scan_lines;
 
-	if (!vga_init_done) {
-		vgacon_scrollback_startup();
-		vga_init_done = true;
-	}
+	vga_init_done = true;
 
 	return display_desc;
 }
@@ -869,7 +653,6 @@ static int vgacon_switch(struct vc_data *c)
 			vgacon_doresize(c, c->vc_cols, c->vc_rows);
 	}
 
-	vgacon_scrollback_switch(c->vc_num);
 	return 0;		/* Redrawing not needed */
 }
 
@@ -1386,7 +1169,6 @@ static bool vgacon_scroll(struct vc_data *c, unsigned int t, unsigned int b,
 	oldo = c->vc_origin;
 	delta = lines * c->vc_size_row;
 	if (dir == SM_UP) {
-		vgacon_scrollback_update(c, t, lines);
 		if (c->vc_scr_end + delta >= vga_vram_end) {
 			scr_memcpyw((u16 *) vga_vram_base,
 				    (u16 *) (oldo + delta),
@@ -1450,7 +1232,6 @@ const struct consw vga_con = {
 	.con_save_screen = vgacon_save_screen,
 	.con_build_attr = vgacon_build_attr,
 	.con_invert_region = vgacon_invert_region,
-	.con_flush_scrollback = vgacon_flush_scrollback,
 };
 EXPORT_SYMBOL(vga_con);
 
diff --git a/drivers/video/fbdev/Kconfig b/drivers/video/fbdev/Kconfig
index e36578258b5b..cfb7f5612ef0 100644
--- a/drivers/video/fbdev/Kconfig
+++ b/drivers/video/fbdev/Kconfig
@@ -272,6 +272,26 @@ config FB_PM2_FIFO_DISCONNECT
 	help
 	  Support the Permedia2 FIFO disconnect feature.
 
+config FB_ARMCLCD
+	tristate "ARM PrimeCell PL110 support"
+	depends on ARM || ARM64 || COMPILE_TEST
+	depends on FB && ARM_AMBA && HAS_IOMEM
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	select FB_MODE_HELPERS if OF
+	select VIDEOMODE_HELPERS if OF
+	select BACKLIGHT_CLASS_DEVICE if OF
+	help
+	  This framebuffer device driver is for the ARM PrimeCell PL110
+	  Colour LCD controller.  ARM PrimeCells provide the building
+	  blocks for System on a Chip devices.
+
+	  If you want to compile this as a module (=code which can be
+	  inserted into and removed from the running kernel), say M
+	  here and read <file:Documentation/kbuild/modules.rst>.  The module
+	  will be called amba-clcd.
+
 config FB_ACORN
 	bool "Acorn VIDC support"
 	depends on (FB = y) && ARM && ARCH_ACORN
diff --git a/drivers/video/fbdev/Makefile b/drivers/video/fbdev/Makefile
index 2ff8849ffde6..477b9624b703 100644
--- a/drivers/video/fbdev/Makefile
+++ b/drivers/video/fbdev/Makefile
@@ -74,6 +74,7 @@ obj-$(CONFIG_FB_HIT)              += hitfb.o
 obj-$(CONFIG_FB_ATMEL)		  += atmel_lcdfb.o
 obj-$(CONFIG_FB_PVR2)             += pvr2fb.o
 obj-$(CONFIG_FB_VOODOO1)          += sstfb.o
+obj-$(CONFIG_FB_ARMCLCD)	  += amba-clcd.o
 obj-$(CONFIG_FB_GOLDFISH)         += goldfishfb.o
 obj-$(CONFIG_FB_68328)            += 68328fb.o
 obj-$(CONFIG_FB_GBE)              += gbefb.o
diff --git a/drivers/video/fbdev/amba-clcd.c b/drivers/video/fbdev/amba-clcd.c
new file mode 100644
index 000000000000..b7682de412d8
--- /dev/null
+++ b/drivers/video/fbdev/amba-clcd.c
@@ -0,0 +1,986 @@
+/*
+ *  linux/drivers/video/amba-clcd.c
+ *
+ * Copyright (C) 2001 ARM Limited, by David A Rusling
+ * Updated to 2.5, Deep Blue Solutions Ltd.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file COPYING in the main directory of this archive
+ * for more details.
+ *
+ *  ARM PrimeCell PL110 Color LCD Controller
+ */
+#include <linux/amba/bus.h>
+#include <linux/amba/clcd.h>
+#include <linux/backlight.h>
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/dma-mapping.h>
+#include <linux/fb.h>
+#include <linux/init.h>
+#include <linux/ioport.h>
+#include <linux/list.h>
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/of_address.h>
+#include <linux/of_graph.h>
+#include <linux/slab.h>
+#include <linux/string.h>
+#include <video/display_timing.h>
+#include <video/of_display_timing.h>
+#include <video/videomode.h>
+
+#define to_clcd(info)	container_of(info, struct clcd_fb, fb)
+
+/* This is limited to 16 characters when displayed by X startup */
+static const char *clcd_name = "CLCD FB";
+
+/*
+ * Unfortunately, the enable/disable functions may be called either from
+ * process or IRQ context, and we _need_ to delay.  This is _not_ good.
+ */
+static inline void clcdfb_sleep(unsigned int ms)
+{
+	if (in_atomic()) {
+		mdelay(ms);
+	} else {
+		msleep(ms);
+	}
+}
+
+static inline void clcdfb_set_start(struct clcd_fb *fb)
+{
+	unsigned long ustart = fb->fb.fix.smem_start;
+	unsigned long lstart;
+
+	ustart += fb->fb.var.yoffset * fb->fb.fix.line_length;
+	lstart = ustart + fb->fb.var.yres * fb->fb.fix.line_length / 2;
+
+	writel(ustart, fb->regs + CLCD_UBAS);
+	writel(lstart, fb->regs + CLCD_LBAS);
+}
+
+static void clcdfb_disable(struct clcd_fb *fb)
+{
+	u32 val;
+
+	if (fb->board->disable)
+		fb->board->disable(fb);
+
+	if (fb->panel->backlight) {
+		fb->panel->backlight->props.power = FB_BLANK_POWERDOWN;
+		backlight_update_status(fb->panel->backlight);
+	}
+
+	val = readl(fb->regs + fb->off_cntl);
+	if (val & CNTL_LCDPWR) {
+		val &= ~CNTL_LCDPWR;
+		writel(val, fb->regs + fb->off_cntl);
+
+		clcdfb_sleep(20);
+	}
+	if (val & CNTL_LCDEN) {
+		val &= ~CNTL_LCDEN;
+		writel(val, fb->regs + fb->off_cntl);
+	}
+
+	/*
+	 * Disable CLCD clock source.
+	 */
+	if (fb->clk_enabled) {
+		fb->clk_enabled = false;
+		clk_disable(fb->clk);
+	}
+}
+
+static void clcdfb_enable(struct clcd_fb *fb, u32 cntl)
+{
+	/*
+	 * Enable the CLCD clock source.
+	 */
+	if (!fb->clk_enabled) {
+		fb->clk_enabled = true;
+		clk_enable(fb->clk);
+	}
+
+	/*
+	 * Bring up by first enabling..
+	 */
+	cntl |= CNTL_LCDEN;
+	writel(cntl, fb->regs + fb->off_cntl);
+
+	clcdfb_sleep(20);
+
+	/*
+	 * and now apply power.
+	 */
+	cntl |= CNTL_LCDPWR;
+	writel(cntl, fb->regs + fb->off_cntl);
+
+	/*
+	 * Turn on backlight
+	 */
+	if (fb->panel->backlight) {
+		fb->panel->backlight->props.power = FB_BLANK_UNBLANK;
+		backlight_update_status(fb->panel->backlight);
+	}
+
+	/*
+	 * finally, enable the interface.
+	 */
+	if (fb->board->enable)
+		fb->board->enable(fb);
+}
+
+static int
+clcdfb_set_bitfields(struct clcd_fb *fb, struct fb_var_screeninfo *var)
+{
+	u32 caps;
+	int ret = 0;
+
+	if (fb->panel->caps && fb->board->caps)
+		caps = fb->panel->caps & fb->board->caps;
+	else {
+		/* Old way of specifying what can be used */
+		caps = fb->panel->cntl & CNTL_BGR ?
+			CLCD_CAP_BGR : CLCD_CAP_RGB;
+		/* But mask out 444 modes as they weren't supported */
+		caps &= ~CLCD_CAP_444;
+	}
+
+	/* Only TFT panels can do RGB888/BGR888 */
+	if (!(fb->panel->cntl & CNTL_LCDTFT))
+		caps &= ~CLCD_CAP_888;
+
+	memset(&var->transp, 0, sizeof(var->transp));
+
+	var->red.msb_right = 0;
+	var->green.msb_right = 0;
+	var->blue.msb_right = 0;
+
+	switch (var->bits_per_pixel) {
+	case 1:
+	case 2:
+	case 4:
+	case 8:
+		/* If we can't do 5551, reject */
+		caps &= CLCD_CAP_5551;
+		if (!caps) {
+			ret = -EINVAL;
+			break;
+		}
+
+		var->red.length		= var->bits_per_pixel;
+		var->red.offset		= 0;
+		var->green.length	= var->bits_per_pixel;
+		var->green.offset	= 0;
+		var->blue.length	= var->bits_per_pixel;
+		var->blue.offset	= 0;
+		break;
+
+	case 16:
+		/* If we can't do 444, 5551 or 565, reject */
+		if (!(caps & (CLCD_CAP_444 | CLCD_CAP_5551 | CLCD_CAP_565))) {
+			ret = -EINVAL;
+			break;
+		}
+
+		/*
+		 * Green length can be 4, 5 or 6 depending whether
+		 * we're operating in 444, 5551 or 565 mode.
+		 */
+		if (var->green.length == 4 && caps & CLCD_CAP_444)
+			caps &= CLCD_CAP_444;
+		if (var->green.length == 5 && caps & CLCD_CAP_5551)
+			caps &= CLCD_CAP_5551;
+		else if (var->green.length == 6 && caps & CLCD_CAP_565)
+			caps &= CLCD_CAP_565;
+		else {
+			/*
+			 * PL110 officially only supports RGB555,
+			 * but may be wired up to allow RGB565.
+			 */
+			if (caps & CLCD_CAP_565) {
+				var->green.length = 6;
+				caps &= CLCD_CAP_565;
+			} else if (caps & CLCD_CAP_5551) {
+				var->green.length = 5;
+				caps &= CLCD_CAP_5551;
+			} else {
+				var->green.length = 4;
+				caps &= CLCD_CAP_444;
+			}
+		}
+
+		if (var->green.length >= 5) {
+			var->red.length = 5;
+			var->blue.length = 5;
+		} else {
+			var->red.length = 4;
+			var->blue.length = 4;
+		}
+		break;
+	case 32:
+		/* If we can't do 888, reject */
+		caps &= CLCD_CAP_888;
+		if (!caps) {
+			ret = -EINVAL;
+			break;
+		}
+
+		var->red.length = 8;
+		var->green.length = 8;
+		var->blue.length = 8;
+		break;
+	default:
+		ret = -EINVAL;
+		break;
+	}
+
+	/*
+	 * >= 16bpp displays have separate colour component bitfields
+	 * encoded in the pixel data.  Calculate their position from
+	 * the bitfield length defined above.
+	 */
+	if (ret == 0 && var->bits_per_pixel >= 16) {
+		bool bgr, rgb;
+
+		bgr = caps & CLCD_CAP_BGR && var->blue.offset == 0;
+		rgb = caps & CLCD_CAP_RGB && var->red.offset == 0;
+
+		if (!bgr && !rgb)
+			/*
+			 * The requested format was not possible, try just
+			 * our capabilities.  One of BGR or RGB must be
+			 * supported.
+			 */
+			bgr = caps & CLCD_CAP_BGR;
+
+		if (bgr) {
+			var->blue.offset = 0;
+			var->green.offset = var->blue.offset + var->blue.length;
+			var->red.offset = var->green.offset + var->green.length;
+		} else {
+			var->red.offset = 0;
+			var->green.offset = var->red.offset + var->red.length;
+			var->blue.offset = var->green.offset + var->green.length;
+		}
+	}
+
+	return ret;
+}
+
+static int clcdfb_check_var(struct fb_var_screeninfo *var, struct fb_info *info)
+{
+	struct clcd_fb *fb = to_clcd(info);
+	int ret = -EINVAL;
+
+	if (fb->board->check)
+		ret = fb->board->check(fb, var);
+
+	if (ret == 0 &&
+	    var->xres_virtual * var->bits_per_pixel / 8 *
+	    var->yres_virtual > fb->fb.fix.smem_len)
+		ret = -EINVAL;
+
+	if (ret == 0)
+		ret = clcdfb_set_bitfields(fb, var);
+
+	return ret;
+}
+
+static int clcdfb_set_par(struct fb_info *info)
+{
+	struct clcd_fb *fb = to_clcd(info);
+	struct clcd_regs regs;
+
+	fb->fb.fix.line_length = fb->fb.var.xres_virtual *
+				 fb->fb.var.bits_per_pixel / 8;
+
+	if (fb->fb.var.bits_per_pixel <= 8)
+		fb->fb.fix.visual = FB_VISUAL_PSEUDOCOLOR;
+	else
+		fb->fb.fix.visual = FB_VISUAL_TRUECOLOR;
+
+	fb->board->decode(fb, &regs);
+
+	clcdfb_disable(fb);
+
+	writel(regs.tim0, fb->regs + CLCD_TIM0);
+	writel(regs.tim1, fb->regs + CLCD_TIM1);
+	writel(regs.tim2, fb->regs + CLCD_TIM2);
+	writel(regs.tim3, fb->regs + CLCD_TIM3);
+
+	clcdfb_set_start(fb);
+
+	clk_set_rate(fb->clk, (1000000000 / regs.pixclock) * 1000);
+
+	fb->clcd_cntl = regs.cntl;
+
+	clcdfb_enable(fb, regs.cntl);
+
+#ifdef DEBUG
+	printk(KERN_INFO
+	       "CLCD: Registers set to\n"
+	       "  %08x %08x %08x %08x\n"
+	       "  %08x %08x %08x %08x\n",
+		readl(fb->regs + CLCD_TIM0), readl(fb->regs + CLCD_TIM1),
+		readl(fb->regs + CLCD_TIM2), readl(fb->regs + CLCD_TIM3),
+		readl(fb->regs + CLCD_UBAS), readl(fb->regs + CLCD_LBAS),
+		readl(fb->regs + fb->off_ienb), readl(fb->regs + fb->off_cntl));
+#endif
+
+	return 0;
+}
+
+static inline u32 convert_bitfield(int val, struct fb_bitfield *bf)
+{
+	unsigned int mask = (1 << bf->length) - 1;
+
+	return (val >> (16 - bf->length) & mask) << bf->offset;
+}
+
+/*
+ *  Set a single color register. The values supplied have a 16 bit
+ *  magnitude.  Return != 0 for invalid regno.
+ */
+static int
+clcdfb_setcolreg(unsigned int regno, unsigned int red, unsigned int green,
+		 unsigned int blue, unsigned int transp, struct fb_info *info)
+{
+	struct clcd_fb *fb = to_clcd(info);
+
+	if (regno < 16)
+		fb->cmap[regno] = convert_bitfield(transp, &fb->fb.var.transp) |
+				  convert_bitfield(blue, &fb->fb.var.blue) |
+				  convert_bitfield(green, &fb->fb.var.green) |
+				  convert_bitfield(red, &fb->fb.var.red);
+
+	if (fb->fb.fix.visual == FB_VISUAL_PSEUDOCOLOR && regno < 256) {
+		int hw_reg = CLCD_PALETTE + ((regno * 2) & ~3);
+		u32 val, mask, newval;
+
+		newval  = (red >> 11)  & 0x001f;
+		newval |= (green >> 6) & 0x03e0;
+		newval |= (blue >> 1)  & 0x7c00;
+
+		/*
+		 * 3.2.11: if we're configured for big endian
+		 * byte order, the palette entries are swapped.
+		 */
+		if (fb->clcd_cntl & CNTL_BEBO)
+			regno ^= 1;
+
+		if (regno & 1) {
+			newval <<= 16;
+			mask = 0x0000ffff;
+		} else {
+			mask = 0xffff0000;
+		}
+
+		val = readl(fb->regs + hw_reg) & mask;
+		writel(val | newval, fb->regs + hw_reg);
+	}
+
+	return regno > 255;
+}
+
+/*
+ *  Blank the screen if blank_mode != 0, else unblank. If blank == NULL
+ *  then the caller blanks by setting the CLUT (Color Look Up Table) to all
+ *  black. Return 0 if blanking succeeded, != 0 if un-/blanking failed due
+ *  to e.g. a video mode which doesn't support it. Implements VESA suspend
+ *  and powerdown modes on hardware that supports disabling hsync/vsync:
+ *    blank_mode == 2: suspend vsync
+ *    blank_mode == 3: suspend hsync
+ *    blank_mode == 4: powerdown
+ */
+static int clcdfb_blank(int blank_mode, struct fb_info *info)
+{
+	struct clcd_fb *fb = to_clcd(info);
+
+	if (blank_mode != 0) {
+		clcdfb_disable(fb);
+	} else {
+		clcdfb_enable(fb, fb->clcd_cntl);
+	}
+	return 0;
+}
+
+static int clcdfb_mmap(struct fb_info *info,
+		       struct vm_area_struct *vma)
+{
+	struct clcd_fb *fb = to_clcd(info);
+	unsigned long len, off = vma->vm_pgoff << PAGE_SHIFT;
+	int ret = -EINVAL;
+
+	len = info->fix.smem_len;
+
+	if (off <= len && vma->vm_end - vma->vm_start <= len - off &&
+	    fb->board->mmap)
+		ret = fb->board->mmap(fb, vma);
+
+	return ret;
+}
+
+static const struct fb_ops clcdfb_ops = {
+	.owner		= THIS_MODULE,
+	.fb_check_var	= clcdfb_check_var,
+	.fb_set_par	= clcdfb_set_par,
+	.fb_setcolreg	= clcdfb_setcolreg,
+	.fb_blank	= clcdfb_blank,
+	.fb_fillrect	= cfb_fillrect,
+	.fb_copyarea	= cfb_copyarea,
+	.fb_imageblit	= cfb_imageblit,
+	.fb_mmap	= clcdfb_mmap,
+};
+
+static int clcdfb_register(struct clcd_fb *fb)
+{
+	int ret;
+
+	/*
+	 * ARM PL111 always has IENB at 0x1c; it's only PL110
+	 * which is reversed on some platforms.
+	 */
+	if (amba_manf(fb->dev) == 0x41 && amba_part(fb->dev) == 0x111) {
+		fb->off_ienb = CLCD_PL111_IENB;
+		fb->off_cntl = CLCD_PL111_CNTL;
+	} else {
+		fb->off_ienb = CLCD_PL110_IENB;
+		fb->off_cntl = CLCD_PL110_CNTL;
+	}
+
+	fb->clk = clk_get(&fb->dev->dev, NULL);
+	if (IS_ERR(fb->clk)) {
+		ret = PTR_ERR(fb->clk);
+		goto out;
+	}
+
+	ret = clk_prepare(fb->clk);
+	if (ret)
+		goto free_clk;
+
+	fb->fb.device		= &fb->dev->dev;
+
+	fb->fb.fix.mmio_start	= fb->dev->res.start;
+	fb->fb.fix.mmio_len	= resource_size(&fb->dev->res);
+
+	fb->regs = ioremap(fb->fb.fix.mmio_start, fb->fb.fix.mmio_len);
+	if (!fb->regs) {
+		printk(KERN_ERR "CLCD: unable to remap registers\n");
+		ret = -ENOMEM;
+		goto clk_unprep;
+	}
+
+	fb->fb.fbops		= &clcdfb_ops;
+	fb->fb.flags		= FBINFO_FLAG_DEFAULT;
+	fb->fb.pseudo_palette	= fb->cmap;
+
+	strncpy(fb->fb.fix.id, clcd_name, sizeof(fb->fb.fix.id));
+	fb->fb.fix.type		= FB_TYPE_PACKED_PIXELS;
+	fb->fb.fix.type_aux	= 0;
+	fb->fb.fix.xpanstep	= 0;
+	fb->fb.fix.ypanstep	= 0;
+	fb->fb.fix.ywrapstep	= 0;
+	fb->fb.fix.accel	= FB_ACCEL_NONE;
+
+	fb->fb.var.xres		= fb->panel->mode.xres;
+	fb->fb.var.yres		= fb->panel->mode.yres;
+	fb->fb.var.xres_virtual	= fb->panel->mode.xres;
+	fb->fb.var.yres_virtual	= fb->panel->mode.yres;
+	fb->fb.var.bits_per_pixel = fb->panel->bpp;
+	fb->fb.var.grayscale	= fb->panel->grayscale;
+	fb->fb.var.pixclock	= fb->panel->mode.pixclock;
+	fb->fb.var.left_margin	= fb->panel->mode.left_margin;
+	fb->fb.var.right_margin	= fb->panel->mode.right_margin;
+	fb->fb.var.upper_margin	= fb->panel->mode.upper_margin;
+	fb->fb.var.lower_margin	= fb->panel->mode.lower_margin;
+	fb->fb.var.hsync_len	= fb->panel->mode.hsync_len;
+	fb->fb.var.vsync_len	= fb->panel->mode.vsync_len;
+	fb->fb.var.sync		= fb->panel->mode.sync;
+	fb->fb.var.vmode	= fb->panel->mode.vmode;
+	fb->fb.var.activate	= FB_ACTIVATE_NOW;
+	fb->fb.var.nonstd	= 0;
+	fb->fb.var.height	= fb->panel->height;
+	fb->fb.var.width	= fb->panel->width;
+	fb->fb.var.accel_flags	= 0;
+
+	fb->fb.monspecs.hfmin	= 0;
+	fb->fb.monspecs.hfmax   = 100000;
+	fb->fb.monspecs.vfmin	= 0;
+	fb->fb.monspecs.vfmax	= 400;
+	fb->fb.monspecs.dclkmin = 1000000;
+	fb->fb.monspecs.dclkmax	= 100000000;
+
+	/*
+	 * Make sure that the bitfields are set appropriately.
+	 */
+	clcdfb_set_bitfields(fb, &fb->fb.var);
+
+	/*
+	 * Allocate colourmap.
+	 */
+	ret = fb_alloc_cmap(&fb->fb.cmap, 256, 0);
+	if (ret)
+		goto unmap;
+
+	/*
+	 * Ensure interrupts are disabled.
+	 */
+	writel(0, fb->regs + fb->off_ienb);
+
+	fb_set_var(&fb->fb, &fb->fb.var);
+
+	dev_info(&fb->dev->dev, "%s hardware, %s display\n",
+	         fb->board->name, fb->panel->mode.name);
+
+	ret = register_framebuffer(&fb->fb);
+	if (ret == 0)
+		goto out;
+
+	printk(KERN_ERR "CLCD: cannot register framebuffer (%d)\n", ret);
+
+	fb_dealloc_cmap(&fb->fb.cmap);
+ unmap:
+	iounmap(fb->regs);
+ clk_unprep:
+	clk_unprepare(fb->clk);
+ free_clk:
+	clk_put(fb->clk);
+ out:
+	return ret;
+}
+
+#ifdef CONFIG_OF
+static int clcdfb_of_get_dpi_panel_mode(struct device_node *node,
+		struct clcd_panel *clcd_panel)
+{
+	int err;
+	struct display_timing timing;
+	struct videomode video;
+
+	err = of_get_display_timing(node, "panel-timing", &timing);
+	if (err) {
+		pr_err("%pOF: problems parsing panel-timing (%d)\n", node, err);
+		return err;
+	}
+
+	videomode_from_timing(&timing, &video);
+
+	err = fb_videomode_from_videomode(&video, &clcd_panel->mode);
+	if (err)
+		return err;
+
+	/* Set up some inversion flags */
+	if (timing.flags & DISPLAY_FLAGS_PIXDATA_NEGEDGE)
+		clcd_panel->tim2 |= TIM2_IPC;
+	else if (!(timing.flags & DISPLAY_FLAGS_PIXDATA_POSEDGE))
+		/*
+		 * To preserve backwards compatibility, the IPC (inverted
+		 * pixel clock) flag needs to be set on any display that
+		 * doesn't explicitly specify that the pixel clock is
+		 * active on the negative or positive edge.
+		 */
+		clcd_panel->tim2 |= TIM2_IPC;
+
+	if (timing.flags & DISPLAY_FLAGS_HSYNC_LOW)
+		clcd_panel->tim2 |= TIM2_IHS;
+
+	if (timing.flags & DISPLAY_FLAGS_VSYNC_LOW)
+		clcd_panel->tim2 |= TIM2_IVS;
+
+	if (timing.flags & DISPLAY_FLAGS_DE_LOW)
+		clcd_panel->tim2 |= TIM2_IOE;
+
+	return 0;
+}
+
+static int clcdfb_snprintf_mode(char *buf, int size, struct fb_videomode *mode)
+{
+	return snprintf(buf, size, "%ux%u@%u", mode->xres, mode->yres,
+			mode->refresh);
+}
+
+static int clcdfb_of_get_backlight(struct device *dev,
+				   struct clcd_panel *clcd_panel)
+{
+	struct backlight_device *backlight;
+
+	/* Look up the optional backlight device */
+	backlight = devm_of_find_backlight(dev);
+	if (IS_ERR(backlight))
+		return PTR_ERR(backlight);
+
+	clcd_panel->backlight = backlight;
+	return 0;
+}
+
+static int clcdfb_of_get_mode(struct device *dev, struct device_node *panel,
+			      struct clcd_panel *clcd_panel)
+{
+	int err;
+	struct fb_videomode *mode;
+	char *name;
+	int len;
+
+	/* Only directly connected DPI panels supported for now */
+	if (of_device_is_compatible(panel, "panel-dpi"))
+		err = clcdfb_of_get_dpi_panel_mode(panel, clcd_panel);
+	else
+		err = -ENOENT;
+	if (err)
+		return err;
+	mode = &clcd_panel->mode;
+
+	len = clcdfb_snprintf_mode(NULL, 0, mode);
+	name = devm_kzalloc(dev, len + 1, GFP_KERNEL);
+	if (!name)
+		return -ENOMEM;
+
+	clcdfb_snprintf_mode(name, len + 1, mode);
+	mode->name = name;
+
+	return 0;
+}
+
+static int clcdfb_of_init_tft_panel(struct clcd_fb *fb, u32 r0, u32 g0, u32 b0)
+{
+	static struct {
+		unsigned int part;
+		u32 r0, g0, b0;
+		u32 caps;
+	} panels[] = {
+		{ 0x110, 1,  7, 13, CLCD_CAP_5551 },
+		{ 0x110, 0,  8, 16, CLCD_CAP_888 },
+		{ 0x110, 16, 8, 0,  CLCD_CAP_888 },
+		{ 0x111, 4, 14, 20, CLCD_CAP_444 },
+		{ 0x111, 3, 11, 19, CLCD_CAP_444 | CLCD_CAP_5551 },
+		{ 0x111, 3, 10, 19, CLCD_CAP_444 | CLCD_CAP_5551 |
+				    CLCD_CAP_565 },
+		{ 0x111, 0,  8, 16, CLCD_CAP_444 | CLCD_CAP_5551 |
+				    CLCD_CAP_565 | CLCD_CAP_888 },
+	};
+	int i;
+
+	/* Bypass pixel clock divider */
+	fb->panel->tim2 |= TIM2_BCD;
+
+	/* TFT display, vert. comp. interrupt at the start of the back porch */
+	fb->panel->cntl |= CNTL_LCDTFT | CNTL_LCDVCOMP(1);
+
+	fb->panel->caps = 0;
+
+	/* Match the setup with known variants */
+	for (i = 0; i < ARRAY_SIZE(panels) && !fb->panel->caps; i++) {
+		if (amba_part(fb->dev) != panels[i].part)
+			continue;
+		if (g0 != panels[i].g0)
+			continue;
+		if (r0 == panels[i].r0 && b0 == panels[i].b0)
+			fb->panel->caps = panels[i].caps;
+	}
+
+	/*
+	 * If we actually physically connected the R lines to B and
+	 * vice versa
+	 */
+	if (r0 != 0 && b0 == 0)
+		fb->panel->bgr_connection = true;
+
+	return fb->panel->caps ? 0 : -EINVAL;
+}
+
+static int clcdfb_of_init_display(struct clcd_fb *fb)
+{
+	struct device_node *endpoint, *panel;
+	int err;
+	unsigned int bpp;
+	u32 max_bandwidth;
+	u32 tft_r0b0g0[3];
+
+	fb->panel = devm_kzalloc(&fb->dev->dev, sizeof(*fb->panel), GFP_KERNEL);
+	if (!fb->panel)
+		return -ENOMEM;
+
+	/*
+	 * Fetch the panel endpoint.
+	 */
+	endpoint = of_graph_get_next_endpoint(fb->dev->dev.of_node, NULL);
+	if (!endpoint)
+		return -ENODEV;
+
+	panel = of_graph_get_remote_port_parent(endpoint);
+	if (!panel)
+		return -ENODEV;
+
+	err = clcdfb_of_get_backlight(&fb->dev->dev, fb->panel);
+	if (err)
+		return err;
+
+	err = clcdfb_of_get_mode(&fb->dev->dev, panel, fb->panel);
+	if (err)
+		return err;
+
+	err = of_property_read_u32(fb->dev->dev.of_node, "max-memory-bandwidth",
+			&max_bandwidth);
+	if (!err) {
+		/*
+		 * max_bandwidth is in bytes per second and pixclock in
+		 * pico-seconds, so the maximum allowed bits per pixel is
+		 *   8 * max_bandwidth / (PICOS2KHZ(pixclock) * 1000)
+		 * Rearrange this calculation to avoid overflow and then ensure
+		 * result is a valid format.
+		 */
+		bpp = max_bandwidth / (1000 / 8)
+			/ PICOS2KHZ(fb->panel->mode.pixclock);
+		bpp = rounddown_pow_of_two(bpp);
+		if (bpp > 32)
+			bpp = 32;
+	} else
+		bpp = 32;
+	fb->panel->bpp = bpp;
+
+#ifdef CONFIG_CPU_BIG_ENDIAN
+	fb->panel->cntl |= CNTL_BEBO;
+#endif
+	fb->panel->width = -1;
+	fb->panel->height = -1;
+
+	if (of_property_read_u32_array(endpoint,
+			"arm,pl11x,tft-r0g0b0-pads",
+			tft_r0b0g0, ARRAY_SIZE(tft_r0b0g0)) != 0)
+		return -ENOENT;
+
+	return clcdfb_of_init_tft_panel(fb, tft_r0b0g0[0],
+					tft_r0b0g0[1],  tft_r0b0g0[2]);
+}
+
+static int clcdfb_of_vram_setup(struct clcd_fb *fb)
+{
+	int err;
+	struct device_node *memory;
+	u64 size;
+
+	err = clcdfb_of_init_display(fb);
+	if (err)
+		return err;
+
+	memory = of_parse_phandle(fb->dev->dev.of_node, "memory-region", 0);
+	if (!memory)
+		return -ENODEV;
+
+	fb->fb.screen_base = of_iomap(memory, 0);
+	if (!fb->fb.screen_base)
+		return -ENOMEM;
+
+	fb->fb.fix.smem_start = of_translate_address(memory,
+			of_get_address(memory, 0, &size, NULL));
+	fb->fb.fix.smem_len = size;
+
+	return 0;
+}
+
+static int clcdfb_of_vram_mmap(struct clcd_fb *fb, struct vm_area_struct *vma)
+{
+	unsigned long off, user_size, kernel_size;
+
+
+	off = vma->vm_pgoff << PAGE_SHIFT;
+	user_size = vma->vm_end - vma->vm_start;
+	kernel_size = fb->fb.fix.smem_len;
+
+	if (off >= kernel_size || user_size > (kernel_size - off))
+		return -ENXIO;
+
+	return remap_pfn_range(vma, vma->vm_start,
+			__phys_to_pfn(fb->fb.fix.smem_start) + vma->vm_pgoff,
+			user_size,
+			pgprot_writecombine(vma->vm_page_prot));
+}
+
+static void clcdfb_of_vram_remove(struct clcd_fb *fb)
+{
+	iounmap(fb->fb.screen_base);
+}
+
+static int clcdfb_of_dma_setup(struct clcd_fb *fb)
+{
+	unsigned long framesize;
+	dma_addr_t dma;
+	int err;
+
+	err = clcdfb_of_init_display(fb);
+	if (err)
+		return err;
+
+	framesize = PAGE_ALIGN(fb->panel->mode.xres * fb->panel->mode.yres *
+			fb->panel->bpp / 8);
+	fb->fb.screen_base = dma_alloc_coherent(&fb->dev->dev, framesize,
+			&dma, GFP_KERNEL);
+	if (!fb->fb.screen_base)
+		return -ENOMEM;
+
+	fb->fb.fix.smem_start = dma;
+	fb->fb.fix.smem_len = framesize;
+
+	return 0;
+}
+
+static int clcdfb_of_dma_mmap(struct clcd_fb *fb, struct vm_area_struct *vma)
+{
+	return dma_mmap_wc(&fb->dev->dev, vma, fb->fb.screen_base,
+			   fb->fb.fix.smem_start, fb->fb.fix.smem_len);
+}
+
+static void clcdfb_of_dma_remove(struct clcd_fb *fb)
+{
+	dma_free_coherent(&fb->dev->dev, fb->fb.fix.smem_len,
+			fb->fb.screen_base, fb->fb.fix.smem_start);
+}
+
+static struct clcd_board *clcdfb_of_get_board(struct amba_device *dev)
+{
+	struct clcd_board *board = devm_kzalloc(&dev->dev, sizeof(*board),
+			GFP_KERNEL);
+	struct device_node *node = dev->dev.of_node;
+
+	if (!board)
+		return NULL;
+
+	board->name = of_node_full_name(node);
+	board->caps = CLCD_CAP_ALL;
+	board->check = clcdfb_check;
+	board->decode = clcdfb_decode;
+	if (of_find_property(node, "memory-region", NULL)) {
+		board->setup = clcdfb_of_vram_setup;
+		board->mmap = clcdfb_of_vram_mmap;
+		board->remove = clcdfb_of_vram_remove;
+	} else {
+		board->setup = clcdfb_of_dma_setup;
+		board->mmap = clcdfb_of_dma_mmap;
+		board->remove = clcdfb_of_dma_remove;
+	}
+
+	return board;
+}
+#else
+static struct clcd_board *clcdfb_of_get_board(struct amba_device *dev)
+{
+	return NULL;
+}
+#endif
+
+static int clcdfb_probe(struct amba_device *dev, const struct amba_id *id)
+{
+	struct clcd_board *board = dev_get_platdata(&dev->dev);
+	struct clcd_fb *fb;
+	int ret;
+
+	if (!board)
+		board = clcdfb_of_get_board(dev);
+
+	if (!board)
+		return -EINVAL;
+
+	ret = dma_set_mask_and_coherent(&dev->dev, DMA_BIT_MASK(32));
+	if (ret)
+		goto out;
+
+	ret = amba_request_regions(dev, NULL);
+	if (ret) {
+		printk(KERN_ERR "CLCD: unable to reserve regs region\n");
+		goto out;
+	}
+
+	fb = kzalloc(sizeof(*fb), GFP_KERNEL);
+	if (!fb) {
+		ret = -ENOMEM;
+		goto free_region;
+	}
+
+	fb->dev = dev;
+	fb->board = board;
+
+	dev_info(&fb->dev->dev, "PL%03x designer %02x rev%u at 0x%08llx\n",
+		amba_part(dev), amba_manf(dev), amba_rev(dev),
+		(unsigned long long)dev->res.start);
+
+	ret = fb->board->setup(fb);
+	if (ret)
+		goto free_fb;
+
+	ret = clcdfb_register(fb);
+	if (ret == 0) {
+		amba_set_drvdata(dev, fb);
+		goto out;
+	}
+
+	fb->board->remove(fb);
+ free_fb:
+	kfree(fb);
+ free_region:
+	amba_release_regions(dev);
+ out:
+	return ret;
+}
+
+static int clcdfb_remove(struct amba_device *dev)
+{
+	struct clcd_fb *fb = amba_get_drvdata(dev);
+
+	clcdfb_disable(fb);
+	unregister_framebuffer(&fb->fb);
+	if (fb->fb.cmap.len)
+		fb_dealloc_cmap(&fb->fb.cmap);
+	iounmap(fb->regs);
+	clk_unprepare(fb->clk);
+	clk_put(fb->clk);
+
+	fb->board->remove(fb);
+
+	kfree(fb);
+
+	amba_release_regions(dev);
+
+	return 0;
+}
+
+static const struct amba_id clcdfb_id_table[] = {
+	{
+		.id	= 0x00041110,
+		.mask	= 0x000ffffe,
+	},
+	{ 0, 0 },
+};
+
+MODULE_DEVICE_TABLE(amba, clcdfb_id_table);
+
+static struct amba_driver clcd_driver = {
+	.drv 		= {
+		.name	= "clcd-pl11x",
+	},
+	.probe		= clcdfb_probe,
+	.remove		= clcdfb_remove,
+	.id_table	= clcdfb_id_table,
+};
+
+static int __init amba_clcdfb_init(void)
+{
+	if (fb_get_options("ambafb", NULL))
+		return -ENODEV;
+
+	return amba_driver_register(&clcd_driver);
+}
+
+module_init(amba_clcdfb_init);
+
+static void __exit amba_clcdfb_exit(void)
+{
+	amba_driver_unregister(&clcd_driver);
+}
+
+module_exit(amba_clcdfb_exit);
+
+MODULE_DESCRIPTION("ARM PrimeCell PL110 CLCD core driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/video/fbdev/core/bitblit.c b/drivers/video/fbdev/core/bitblit.c
index 4e6cbc24346d..9725ecd1255b 100644
--- a/drivers/video/fbdev/core/bitblit.c
+++ b/drivers/video/fbdev/core/bitblit.c
@@ -234,7 +234,7 @@ static void bit_clear_margins(struct vc_data *vc, struct fb_info *info,
 }
 
 static void bit_cursor(struct vc_data *vc, struct fb_info *info, int mode,
-		       int softback_lines, int fg, int bg)
+		       int fg, int bg)
 {
 	struct fb_cursor cursor;
 	struct fbcon_ops *ops = info->fbcon_par;
@@ -247,15 +247,6 @@ static void bit_cursor(struct vc_data *vc, struct fb_info *info, int mode,
 
 	cursor.set = 0;
 
-	if (softback_lines) {
-		if (y + softback_lines >= vc->vc_rows) {
-			mode = CM_ERASE;
-			ops->cursor_flash = 0;
-			return;
-		} else
-			y += softback_lines;
-	}
-
  	c = scr_readw((u16 *) vc->vc_pos);
 	attribute = get_attribute(info, c);
 	src = vc->vc_font.data + ((c & charmask) * (w * vc->vc_font.height));
diff --git a/drivers/video/fbdev/core/fbcon.c b/drivers/video/fbdev/core/fbcon.c
index ae4de3bfd2d7..cef437817b0d 100644
--- a/drivers/video/fbdev/core/fbcon.c
+++ b/drivers/video/fbdev/core/fbcon.c
@@ -122,12 +122,6 @@ static int logo_lines;
 /* logo_shown is an index to vc_cons when >= 0; otherwise follows FBCON_LOGO
    enums.  */
 static int logo_shown = FBCON_LOGO_CANSHOW;
-/* Software scrollback */
-static int fbcon_softback_size = 32768;
-static unsigned long softback_buf, softback_curr;
-static unsigned long softback_in;
-static unsigned long softback_top, softback_end;
-static int softback_lines;
 /* console mappings */
 static int first_fb_vc;
 static int last_fb_vc = MAX_NR_CONSOLES - 1;
@@ -167,12 +161,8 @@ static int margin_color;
 
 static const struct consw fb_con;
 
-#define CM_SOFTBACK	(8)
-
 #define advance_row(p, delta) (unsigned short *)((unsigned long)(p) + (delta) * vc->vc_size_row)
 
-static int fbcon_set_origin(struct vc_data *);
-
 static int fbcon_cursor_noblink;
 
 #define divides(a, b)	((!(a) || (b)%(a)) ? 0 : 1)
@@ -373,18 +363,6 @@ static int get_color(struct vc_data *vc, struct fb_info *info,
 	return color;
 }
 
-static void fbcon_update_softback(struct vc_data *vc)
-{
-	int l = fbcon_softback_size / vc->vc_size_row;
-
-	if (l > 5)
-		softback_end = softback_buf + l * vc->vc_size_row;
-	else
-		/* Smaller scrollback makes no sense, and 0 would screw
-		   the operation totally */
-		softback_top = 0;
-}
-
 static void fb_flashcursor(struct work_struct *work)
 {
 	struct fb_info *info = container_of(work, struct fb_info, queue);
@@ -414,7 +392,7 @@ static void fb_flashcursor(struct work_struct *work)
 	c = scr_readw((u16 *) vc->vc_pos);
 	mode = (!ops->cursor_flash || ops->cursor_state.enable) ?
 		CM_ERASE : CM_DRAW;
-	ops->cursor(vc, info, mode, softback_lines, get_color(vc, info, c, 1),
+	ops->cursor(vc, info, mode, get_color(vc, info, c, 1),
 		    get_color(vc, info, c, 0));
 	console_unlock();
 }
@@ -471,13 +449,7 @@ static int __init fb_console_setup(char *this_opt)
 		}
 		
 		if (!strncmp(options, "scrollback:", 11)) {
-			options += 11;
-			if (*options) {
-				fbcon_softback_size = simple_strtoul(options, &options, 0);
-				if (*options == 'k' || *options == 'K') {
-					fbcon_softback_size *= 1024;
-				}
-			}
+			pr_warn("Ignoring scrollback size option\n");
 			continue;
 		}
 		
@@ -1022,31 +994,6 @@ static const char *fbcon_startup(void)
 
 	set_blitting_type(vc, info);
 
-	if (info->fix.type != FB_TYPE_TEXT) {
-		if (fbcon_softback_size) {
-			if (!softback_buf) {
-				softback_buf =
-				    (unsigned long)
-				    kvmalloc(fbcon_softback_size,
-					    GFP_KERNEL);
-				if (!softback_buf) {
-					fbcon_softback_size = 0;
-					softback_top = 0;
-				}
-			}
-		} else {
-			if (softback_buf) {
-				kvfree((void *) softback_buf);
-				softback_buf = 0;
-				softback_top = 0;
-			}
-		}
-		if (softback_buf)
-			softback_in = softback_top = softback_curr =
-			    softback_buf;
-		softback_lines = 0;
-	}
-
 	/* Setup default font */
 	if (!p->fontdata && !vc->vc_font.data) {
 		if (!fontname[0] || !(font = find_font(fontname)))
@@ -1220,9 +1167,6 @@ static void fbcon_init(struct vc_data *vc, int init)
 	if (logo)
 		fbcon_prepare_logo(vc, info, cols, rows, new_cols, new_rows);
 
-	if (vc == svc && softback_buf)
-		fbcon_update_softback(vc);
-
 	if (ops->rotate_font && ops->rotate_font(info, vc)) {
 		ops->rotate = FB_ROTATE_UR;
 		set_blitting_type(vc, info);
@@ -1385,7 +1329,6 @@ static void fbcon_cursor(struct vc_data *vc, int mode)
 {
 	struct fb_info *info = registered_fb[con2fb_map[vc->vc_num]];
 	struct fbcon_ops *ops = info->fbcon_par;
-	int y;
  	int c = scr_readw((u16 *) vc->vc_pos);
 
 	ops->cur_blink_jiffies = msecs_to_jiffies(vc->vc_cur_blink_ms);
@@ -1399,16 +1342,8 @@ static void fbcon_cursor(struct vc_data *vc, int mode)
 		fbcon_add_cursor_timer(info);
 
 	ops->cursor_flash = (mode == CM_ERASE) ? 0 : 1;
-	if (mode & CM_SOFTBACK) {
-		mode &= ~CM_SOFTBACK;
-		y = softback_lines;
-	} else {
-		if (softback_lines)
-			fbcon_set_origin(vc);
-		y = 0;
-	}
 
-	ops->cursor(vc, info, mode, y, get_color(vc, info, c, 1),
+	ops->cursor(vc, info, mode, get_color(vc, info, c, 1),
 		    get_color(vc, info, c, 0));
 }
 
@@ -1479,8 +1414,6 @@ static void fbcon_set_disp(struct fb_info *info, struct fb_var_screeninfo *var,
 
 	if (con_is_visible(vc)) {
 		update_screen(vc);
-		if (softback_buf)
-			fbcon_update_softback(vc);
 	}
 }
 
@@ -1618,99 +1551,6 @@ static __inline__ void ypan_down_redraw(struct vc_data *vc, int t, int count)
 	scrollback_current = 0;
 }
 
-static void fbcon_redraw_softback(struct vc_data *vc, struct fbcon_display *p,
-				  long delta)
-{
-	int count = vc->vc_rows;
-	unsigned short *d, *s;
-	unsigned long n;
-	int line = 0;
-
-	d = (u16 *) softback_curr;
-	if (d == (u16 *) softback_in)
-		d = (u16 *) vc->vc_origin;
-	n = softback_curr + delta * vc->vc_size_row;
-	softback_lines -= delta;
-	if (delta < 0) {
-		if (softback_curr < softback_top && n < softback_buf) {
-			n += softback_end - softback_buf;
-			if (n < softback_top) {
-				softback_lines -=
-				    (softback_top - n) / vc->vc_size_row;
-				n = softback_top;
-			}
-		} else if (softback_curr >= softback_top
-			   && n < softback_top) {
-			softback_lines -=
-			    (softback_top - n) / vc->vc_size_row;
-			n = softback_top;
-		}
-	} else {
-		if (softback_curr > softback_in && n >= softback_end) {
-			n += softback_buf - softback_end;
-			if (n > softback_in) {
-				n = softback_in;
-				softback_lines = 0;
-			}
-		} else if (softback_curr <= softback_in && n > softback_in) {
-			n = softback_in;
-			softback_lines = 0;
-		}
-	}
-	if (n == softback_curr)
-		return;
-	softback_curr = n;
-	s = (u16 *) softback_curr;
-	if (s == (u16 *) softback_in)
-		s = (u16 *) vc->vc_origin;
-	while (count--) {
-		unsigned short *start;
-		unsigned short *le;
-		unsigned short c;
-		int x = 0;
-		unsigned short attr = 1;
-
-		start = s;
-		le = advance_row(s, 1);
-		do {
-			c = scr_readw(s);
-			if (attr != (c & 0xff00)) {
-				attr = c & 0xff00;
-				if (s > start) {
-					fbcon_putcs(vc, start, s - start,
-						    line, x);
-					x += s - start;
-					start = s;
-				}
-			}
-			if (c == scr_readw(d)) {
-				if (s > start) {
-					fbcon_putcs(vc, start, s - start,
-						    line, x);
-					x += s - start + 1;
-					start = s + 1;
-				} else {
-					x++;
-					start++;
-				}
-			}
-			s++;
-			d++;
-		} while (s < le);
-		if (s > start)
-			fbcon_putcs(vc, start, s - start, line, x);
-		line++;
-		if (d == (u16 *) softback_end)
-			d = (u16 *) softback_buf;
-		if (d == (u16 *) softback_in)
-			d = (u16 *) vc->vc_origin;
-		if (s == (u16 *) softback_end)
-			s = (u16 *) softback_buf;
-		if (s == (u16 *) softback_in)
-			s = (u16 *) vc->vc_origin;
-	}
-}
-
 static void fbcon_redraw_move(struct vc_data *vc, struct fbcon_display *p,
 			      int line, int count, int dy)
 {
@@ -1850,31 +1690,6 @@ static void fbcon_redraw(struct vc_data *vc, struct fbcon_display *p,
 	}
 }
 
-static inline void fbcon_softback_note(struct vc_data *vc, int t,
-				       int count)
-{
-	unsigned short *p;
-
-	if (vc->vc_num != fg_console)
-		return;
-	p = (unsigned short *) (vc->vc_origin + t * vc->vc_size_row);
-
-	while (count) {
-		scr_memcpyw((u16 *) softback_in, p, vc->vc_size_row);
-		count--;
-		p = advance_row(p, 1);
-		softback_in += vc->vc_size_row;
-		if (softback_in == softback_end)
-			softback_in = softback_buf;
-		if (softback_in == softback_top) {
-			softback_top += vc->vc_size_row;
-			if (softback_top == softback_end)
-				softback_top = softback_buf;
-		}
-	}
-	softback_curr = softback_in;
-}
-
 static bool fbcon_scroll(struct vc_data *vc, unsigned int t, unsigned int b,
 		enum con_scroll dir, unsigned int count)
 {
@@ -1897,8 +1712,6 @@ static bool fbcon_scroll(struct vc_data *vc, unsigned int t, unsigned int b,
 	case SM_UP:
 		if (count > vc->vc_rows)	/* Maximum realistic size */
 			count = vc->vc_rows;
-		if (softback_top)
-			fbcon_softback_note(vc, t, count);
 		if (logo_shown >= 0)
 			goto redraw_up;
 		switch (p->scrollmode) {
@@ -2201,7 +2014,7 @@ static int fbcon_resize(struct vc_data *vc, unsigned int width,
 	struct fb_var_screeninfo var = info->var;
 	int x_diff, y_diff, virt_w, virt_h, virt_fw, virt_fh;
 
-	if (ops->p && ops->p->userfont && FNTSIZE(vc->vc_font.data)) {
+	if (p->userfont && FNTSIZE(vc->vc_font.data)) {
 		int size;
 		int pitch = PITCH(vc->vc_font.width);
 
@@ -2267,14 +2080,6 @@ static int fbcon_switch(struct vc_data *vc)
 	info = registered_fb[con2fb_map[vc->vc_num]];
 	ops = info->fbcon_par;
 
-	if (softback_top) {
-		if (softback_lines)
-			fbcon_set_origin(vc);
-		softback_top = softback_curr = softback_in = softback_buf;
-		softback_lines = 0;
-		fbcon_update_softback(vc);
-	}
-
 	if (logo_shown >= 0) {
 		struct vc_data *conp2 = vc_cons[logo_shown].d;
 
@@ -2490,6 +2295,9 @@ static int fbcon_get_font(struct vc_data *vc, struct console_font *font)
 
 	if (font->width <= 8) {
 		j = vc->vc_font.height;
+		if (font->charcount * j > FNTSIZE(fontdata))
+			return -EINVAL;
+
 		for (i = 0; i < font->charcount; i++) {
 			memcpy(data, fontdata, j);
 			memset(data + j, 0, 32 - j);
@@ -2498,6 +2306,9 @@ static int fbcon_get_font(struct vc_data *vc, struct console_font *font)
 		}
 	} else if (font->width <= 16) {
 		j = vc->vc_font.height * 2;
+		if (font->charcount * j > FNTSIZE(fontdata))
+			return -EINVAL;
+
 		for (i = 0; i < font->charcount; i++) {
 			memcpy(data, fontdata, j);
 			memset(data + j, 0, 64 - j);
@@ -2505,6 +2316,9 @@ static int fbcon_get_font(struct vc_data *vc, struct console_font *font)
 			fontdata += j;
 		}
 	} else if (font->width <= 24) {
+		if (font->charcount * (vc->vc_font.height * sizeof(u32)) > FNTSIZE(fontdata))
+			return -EINVAL;
+
 		for (i = 0; i < font->charcount; i++) {
 			for (j = 0; j < vc->vc_font.height; j++) {
 				*data++ = fontdata[0];
@@ -2517,6 +2331,9 @@ static int fbcon_get_font(struct vc_data *vc, struct console_font *font)
 		}
 	} else {
 		j = vc->vc_font.height * 4;
+		if (font->charcount * j > FNTSIZE(fontdata))
+			return -EINVAL;
+
 		for (i = 0; i < font->charcount; i++) {
 			memcpy(data, fontdata, j);
 			memset(data + j, 0, 128 - j);
@@ -2598,9 +2415,6 @@ static int fbcon_do_set_font(struct vc_data *vc, int w, int h,
 	int cnt;
 	char *old_data = NULL;
 
-	if (con_is_visible(vc) && softback_lines)
-		fbcon_set_origin(vc);
-
 	resize = (w != vc->vc_font.width) || (h != vc->vc_font.height);
 	if (p->userfont)
 		old_data = vc->vc_font.data;
@@ -2626,8 +2440,6 @@ static int fbcon_do_set_font(struct vc_data *vc, int w, int h,
 		cols /= w;
 		rows /= h;
 		vc_resize(vc, cols, rows);
-		if (con_is_visible(vc) && softback_buf)
-			fbcon_update_softback(vc);
 	} else if (con_is_visible(vc)
 		   && vc->vc_mode == KD_TEXT) {
 		fbcon_clear_margins(vc, 0);
@@ -2784,21 +2596,9 @@ static void fbcon_set_palette(struct vc_data *vc, const unsigned char *table)
 	fb_set_cmap(&palette_cmap, info);
 }
 
-static u16 *fbcon_screen_pos(struct vc_data *vc, int offset)
+static u16 *fbcon_screen_pos(const struct vc_data *vc, int offset)
 {
-	unsigned long p;
-	int line;
-	
-	if (vc->vc_num != fg_console || !softback_lines)
-		return (u16 *) (vc->vc_origin + offset);
-	line = offset / vc->vc_size_row;
-	if (line >= softback_lines)
-		return (u16 *) (vc->vc_origin + offset -
-				softback_lines * vc->vc_size_row);
-	p = softback_curr + offset;
-	if (p >= softback_end)
-		p += softback_buf - softback_end;
-	return (u16 *) p;
+	return (u16 *) (vc->vc_origin + offset);
 }
 
 static unsigned long fbcon_getxy(struct vc_data *vc, unsigned long pos,
@@ -2812,22 +2612,7 @@ static unsigned long fbcon_getxy(struct vc_data *vc, unsigned long pos,
 
 		x = offset % vc->vc_cols;
 		y = offset / vc->vc_cols;
-		if (vc->vc_num == fg_console)
-			y += softback_lines;
 		ret = pos + (vc->vc_cols - x) * 2;
-	} else if (vc->vc_num == fg_console && softback_lines) {
-		unsigned long offset = pos - softback_curr;
-
-		if (pos < softback_curr)
-			offset += softback_end - softback_buf;
-		offset /= 2;
-		x = offset % vc->vc_cols;
-		y = offset / vc->vc_cols;
-		ret = pos + (vc->vc_cols - x) * 2;
-		if (ret == softback_end)
-			ret = softback_buf;
-		if (ret == softback_in)
-			ret = vc->vc_origin;
 	} else {
 		/* Should not happen */
 		x = y = 0;
@@ -2855,107 +2640,7 @@ static void fbcon_invert_region(struct vc_data *vc, u16 * p, int cnt)
 			a = ((a) & 0x88ff) | (((a) & 0x7000) >> 4) |
 			    (((a) & 0x0700) << 4);
 		scr_writew(a, p++);
-		if (p == (u16 *) softback_end)
-			p = (u16 *) softback_buf;
-		if (p == (u16 *) softback_in)
-			p = (u16 *) vc->vc_origin;
-	}
-}
-
-static void fbcon_scrolldelta(struct vc_data *vc, int lines)
-{
-	struct fb_info *info = registered_fb[con2fb_map[fg_console]];
-	struct fbcon_ops *ops = info->fbcon_par;
-	struct fbcon_display *disp = &fb_display[fg_console];
-	int offset, limit, scrollback_old;
-
-	if (softback_top) {
-		if (vc->vc_num != fg_console)
-			return;
-		if (vc->vc_mode != KD_TEXT || !lines)
-			return;
-		if (logo_shown >= 0) {
-			struct vc_data *conp2 = vc_cons[logo_shown].d;
-
-			if (conp2->vc_top == logo_lines
-			    && conp2->vc_bottom == conp2->vc_rows)
-				conp2->vc_top = 0;
-			if (logo_shown == vc->vc_num) {
-				unsigned long p, q;
-				int i;
-
-				p = softback_in;
-				q = vc->vc_origin +
-				    logo_lines * vc->vc_size_row;
-				for (i = 0; i < logo_lines; i++) {
-					if (p == softback_top)
-						break;
-					if (p == softback_buf)
-						p = softback_end;
-					p -= vc->vc_size_row;
-					q -= vc->vc_size_row;
-					scr_memcpyw((u16 *) q, (u16 *) p,
-						    vc->vc_size_row);
-				}
-				softback_in = softback_curr = p;
-				update_region(vc, vc->vc_origin,
-					      logo_lines * vc->vc_cols);
-			}
-			logo_shown = FBCON_LOGO_CANSHOW;
-		}
-		fbcon_cursor(vc, CM_ERASE | CM_SOFTBACK);
-		fbcon_redraw_softback(vc, disp, lines);
-		fbcon_cursor(vc, CM_DRAW | CM_SOFTBACK);
-		return;
-	}
-
-	if (!scrollback_phys_max)
-		return;
-
-	scrollback_old = scrollback_current;
-	scrollback_current -= lines;
-	if (scrollback_current < 0)
-		scrollback_current = 0;
-	else if (scrollback_current > scrollback_max)
-		scrollback_current = scrollback_max;
-	if (scrollback_current == scrollback_old)
-		return;
-
-	if (fbcon_is_inactive(vc, info))
-		return;
-
-	fbcon_cursor(vc, CM_ERASE);
-
-	offset = disp->yscroll - scrollback_current;
-	limit = disp->vrows;
-	switch (disp->scrollmode) {
-	case SCROLL_WRAP_MOVE:
-		info->var.vmode |= FB_VMODE_YWRAP;
-		break;
-	case SCROLL_PAN_MOVE:
-	case SCROLL_PAN_REDRAW:
-		limit -= vc->vc_rows;
-		info->var.vmode &= ~FB_VMODE_YWRAP;
-		break;
 	}
-	if (offset < 0)
-		offset += limit;
-	else if (offset >= limit)
-		offset -= limit;
-
-	ops->var.xoffset = 0;
-	ops->var.yoffset = offset * vc->vc_font.height;
-	ops->update_start(info);
-
-	if (!scrollback_current)
-		fbcon_cursor(vc, CM_DRAW);
-}
-
-static int fbcon_set_origin(struct vc_data *vc)
-{
-	if (softback_lines)
-		fbcon_scrolldelta(vc, softback_lines);
-	return 0;
 }
 
 void fbcon_suspended(struct fb_info *info)
@@ -3018,8 +2703,6 @@ static void fbcon_modechanged(struct fb_info *info)
 
 		fbcon_set_palette(vc, color_table);
 		update_screen(vc);
-		if (softback_buf)
-			fbcon_update_softback(vc);
 	}
 }
 
@@ -3430,8 +3113,6 @@ static const struct consw fb_con = {
 	.con_font_default	= fbcon_set_def_font,
 	.con_font_copy 		= fbcon_copy_font,
 	.con_set_palette 	= fbcon_set_palette,
-	.con_scrolldelta 	= fbcon_scrolldelta,
-	.con_set_origin 	= fbcon_set_origin,
 	.con_invert_region 	= fbcon_invert_region,
 	.con_screen_pos 	= fbcon_screen_pos,
 	.con_getxy 		= fbcon_getxy,
@@ -3665,9 +3346,6 @@ static void fbcon_exit(void)
 	}
 #endif
 
-	kvfree((void *)softback_buf);
-	softback_buf = 0UL;
-
 	for_each_registered_fb(i) {
 		int pending = 0;
 
diff --git a/drivers/video/fbdev/core/fbcon.h b/drivers/video/fbdev/core/fbcon.h
index 20dea853765f..9315b360c898 100644
--- a/drivers/video/fbdev/core/fbcon.h
+++ b/drivers/video/fbdev/core/fbcon.h
@@ -62,7 +62,7 @@ struct fbcon_ops {
 	void (*clear_margins)(struct vc_data *vc, struct fb_info *info,
 			      int color, int bottom_only);
 	void (*cursor)(struct vc_data *vc, struct fb_info *info, int mode,
-		       int softback_lines, int fg, int bg);
+		       int fg, int bg);
 	int  (*update_start)(struct fb_info *info);
 	int  (*rotate_font)(struct fb_info *info, struct vc_data *vc);
 	struct fb_var_screeninfo var;  /* copy of the current fb_var_screeninfo */
@@ -152,13 +152,6 @@ static inline int attr_col_ec(int shift, struct vc_data *vc,
 #define attr_bgcol_ec(bgshift, vc, info) attr_col_ec(bgshift, vc, info, 0)
 #define attr_fgcol_ec(fgshift, vc, info) attr_col_ec(fgshift, vc, info, 1)
 
-/* Font */
-#define REFCOUNT(fd)	(((int *)(fd))[-1])
-#define FNTSIZE(fd)	(((int *)(fd))[-2])
-#define FNTCHARCNT(fd)	(((int *)(fd))[-3])
-#define FNTSUM(fd)	(((int *)(fd))[-4])
-#define FONT_EXTRA_WORDS 4
-
     /*
      *  Scroll Method
      */
diff --git a/drivers/video/fbdev/core/fbcon_ccw.c b/drivers/video/fbdev/core/fbcon_ccw.c
index 5b177131e062..bbd869efd03b 100644
--- a/drivers/video/fbdev/core/fbcon_ccw.c
+++ b/drivers/video/fbdev/core/fbcon_ccw.c
@@ -219,7 +219,7 @@ static void ccw_clear_margins(struct vc_data *vc, struct fb_info *info,
 }
 
 static void ccw_cursor(struct vc_data *vc, struct fb_info *info, int mode,
-		       int softback_lines, int fg, int bg)
+		       int fg, int bg)
 {
 	struct fb_cursor cursor;
 	struct fbcon_ops *ops = info->fbcon_par;
@@ -236,15 +236,6 @@ static void ccw_cursor(struct vc_data *vc, struct fb_info *info, int mode,
 
 	cursor.set = 0;
 
-	if (softback_lines) {
-		if (y + softback_lines >= vc->vc_rows) {
-			mode = CM_ERASE;
-			ops->cursor_flash = 0;
-			return;
-		} else
-			y += softback_lines;
-	}
-
  	c = scr_readw((u16 *) vc->vc_pos);
 	attribute = get_attribute(info, c);
 	src = ops->fontbuffer + ((c & charmask) * (w * vc->vc_font.width));
diff --git a/drivers/video/fbdev/core/fbcon_cw.c b/drivers/video/fbdev/core/fbcon_cw.c
index 894d01a62f30..a34cbe8e9874 100644
--- a/drivers/video/fbdev/core/fbcon_cw.c
+++ b/drivers/video/fbdev/core/fbcon_cw.c
@@ -202,7 +202,7 @@ static void cw_clear_margins(struct vc_data *vc, struct fb_info *info,
 }
 
 static void cw_cursor(struct vc_data *vc, struct fb_info *info, int mode,
-		      int softback_lines, int fg, int bg)
+		      int fg, int bg)
 {
 	struct fb_cursor cursor;
 	struct fbcon_ops *ops = info->fbcon_par;
@@ -219,15 +219,6 @@ static void cw_cursor(struct vc_data *vc, struct fb_info *info, int mode,
 
 	cursor.set = 0;
 
-	if (softback_lines) {
-		if (y + softback_lines >= vc->vc_rows) {
-			mode = CM_ERASE;
-			ops->cursor_flash = 0;
-			return;
-		} else
-			y += softback_lines;
-	}
-
  	c = scr_readw((u16 *) vc->vc_pos);
 	attribute = get_attribute(info, c);
 	src = ops->fontbuffer + ((c & charmask) * (w * vc->vc_font.width));
diff --git a/drivers/video/fbdev/core/fbcon_rotate.c b/drivers/video/fbdev/core/fbcon_rotate.c
index c0d445294aa7..ac72d4f85f7d 100644
--- a/drivers/video/fbdev/core/fbcon_rotate.c
+++ b/drivers/video/fbdev/core/fbcon_rotate.c
@@ -14,6 +14,7 @@
 #include <linux/fb.h>
 #include <linux/vt_kern.h>
 #include <linux/console.h>
+#include <linux/font.h>
 #include <asm/types.h>
 #include "fbcon.h"
 #include "fbcon_rotate.h"
diff --git a/drivers/video/fbdev/core/fbcon_ud.c b/drivers/video/fbdev/core/fbcon_ud.c
index 01b87f278d79..199cbc7abe35 100644
--- a/drivers/video/fbdev/core/fbcon_ud.c
+++ b/drivers/video/fbdev/core/fbcon_ud.c
@@ -249,7 +249,7 @@ static void ud_clear_margins(struct vc_data *vc, struct fb_info *info,
 }
 
 static void ud_cursor(struct vc_data *vc, struct fb_info *info, int mode,
-		      int softback_lines, int fg, int bg)
+		      int fg, int bg)
 {
 	struct fb_cursor cursor;
 	struct fbcon_ops *ops = info->fbcon_par;
@@ -267,15 +267,6 @@ static void ud_cursor(struct vc_data *vc, struct fb_info *info, int mode,
 
 	cursor.set = 0;
 
-	if (softback_lines) {
-		if (y + softback_lines >= vc->vc_rows) {
-			mode = CM_ERASE;
-			ops->cursor_flash = 0;
-			return;
-		} else
-			y += softback_lines;
-	}
-
  	c = scr_readw((u16 *) vc->vc_pos);
 	attribute = get_attribute(info, c);
 	src = ops->fontbuffer + ((c & charmask) * (w * vc->vc_font.height));
diff --git a/drivers/video/fbdev/core/tileblit.c b/drivers/video/fbdev/core/tileblit.c
index 1dfaff0881fb..628fe5e010c0 100644
--- a/drivers/video/fbdev/core/tileblit.c
+++ b/drivers/video/fbdev/core/tileblit.c
@@ -13,6 +13,7 @@
 #include <linux/fb.h>
 #include <linux/vt_kern.h>
 #include <linux/console.h>
+#include <linux/font.h>
 #include <asm/types.h>
 #include "fbcon.h"
 
@@ -80,7 +81,7 @@ static void tile_clear_margins(struct vc_data *vc, struct fb_info *info,
 }
 
 static void tile_cursor(struct vc_data *vc, struct fb_info *info, int mode,
-			int softback_lines, int fg, int bg)
+			int fg, int bg)
 {
 	struct fb_tilecursor cursor;
 	int use_sw = vc->vc_cursor_type & CUR_SW;
diff --git a/drivers/video/fbdev/hyperv_fb.c b/drivers/video/fbdev/hyperv_fb.c
index 02411d89cb46..e36fb1a0ecdb 100644
--- a/drivers/video/fbdev/hyperv_fb.c
+++ b/drivers/video/fbdev/hyperv_fb.c
@@ -1114,8 +1114,15 @@ static int hvfb_getmem(struct hv_device *hdev, struct fb_info *info)
 getmem_done:
 	remove_conflicting_framebuffers(info->apertures,
 					KBUILD_MODNAME, false);
-	if (!gen2vm)
+
+	if (gen2vm) {
+		/* framebuffer is reallocated, clear screen_info to avoid misuse from kexec */
+		screen_info.lfb_size = 0;
+		screen_info.lfb_base = 0;
+		screen_info.orig_video_isVGA = 0;
+	} else {
 		pci_dev_put(pdev);
+	}
 	kfree(info->apertures);
 
 	return 0;
diff --git a/drivers/video/fbdev/s3c2410fb-regs-lcd.h b/drivers/video/fbdev/s3c2410fb-regs-lcd.h
new file mode 100644
index 000000000000..1e46f7a788e5
--- /dev/null
+++ b/drivers/video/fbdev/s3c2410fb-regs-lcd.h
@@ -0,0 +1,143 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2003 Simtec Electronics <linux@simtec.co.uk>
+ *		      http://www.simtec.co.uk/products/SWLINUX/
+ */
+
+#ifndef ___ASM_ARCH_REGS_LCD_H
+#define ___ASM_ARCH_REGS_LCD_H
+
+/*
+ * a couple of values are used as platform data in
+ * include/linux/platform_data/fb-s3c2410.h and not
+ * duplicated here.
+ */
+#include <linux/platform_data/fb-s3c2410.h>
+
+#define S3C2410_LCDREG(x)	(x)
+
+/* LCD control registers */
+#define S3C2410_LCDCON1	    S3C2410_LCDREG(0x00)
+#define S3C2410_LCDCON2	    S3C2410_LCDREG(0x04)
+#define S3C2410_LCDCON3	    S3C2410_LCDREG(0x08)
+#define S3C2410_LCDCON4	    S3C2410_LCDREG(0x0C)
+#define S3C2410_LCDCON5	    S3C2410_LCDREG(0x10)
+
+#define S3C2410_LCDCON1_CLKVAL(x)  ((x) << 8)
+#define S3C2410_LCDCON1_MMODE	   (1<<7)
+#define S3C2410_LCDCON1_DSCAN4	   (0<<5)
+#define S3C2410_LCDCON1_STN4	   (1<<5)
+#define S3C2410_LCDCON1_STN8	   (2<<5)
+#define S3C2410_LCDCON1_TFT	   (3<<5)
+
+#define S3C2410_LCDCON1_STN1BPP	   (0<<1)
+#define S3C2410_LCDCON1_STN2GREY   (1<<1)
+#define S3C2410_LCDCON1_STN4GREY   (2<<1)
+#define S3C2410_LCDCON1_STN8BPP	   (3<<1)
+#define S3C2410_LCDCON1_STN12BPP   (4<<1)
+
+#define S3C2410_LCDCON1_ENVID	   (1)
+
+#define S3C2410_LCDCON1_MODEMASK    0x1E
+
+#define S3C2410_LCDCON2_VBPD(x)	    ((x) << 24)
+#define S3C2410_LCDCON2_LINEVAL(x)  ((x) << 14)
+#define S3C2410_LCDCON2_VFPD(x)	    ((x) << 6)
+#define S3C2410_LCDCON2_VSPW(x)	    ((x) << 0)
+
+#define S3C2410_LCDCON2_GET_VBPD(x) ( ((x) >> 24) & 0xFF)
+#define S3C2410_LCDCON2_GET_VFPD(x) ( ((x) >>  6) & 0xFF)
+#define S3C2410_LCDCON2_GET_VSPW(x) ( ((x) >>  0) & 0x3F)
+
+#define S3C2410_LCDCON3_HBPD(x)	    ((x) << 19)
+#define S3C2410_LCDCON3_WDLY(x)	    ((x) << 19)
+#define S3C2410_LCDCON3_HOZVAL(x)   ((x) << 8)
+#define S3C2410_LCDCON3_HFPD(x)	    ((x) << 0)
+#define S3C2410_LCDCON3_LINEBLANK(x)((x) << 0)
+
+#define S3C2410_LCDCON3_GET_HBPD(x) ( ((x) >> 19) & 0x7F)
+#define S3C2410_LCDCON3_GET_HFPD(x) ( ((x) >>  0) & 0xFF)
+
+/* LDCCON4 changes for STN mode on the S3C2412 */
+
+#define S3C2410_LCDCON4_MVAL(x)	    ((x) << 8)
+#define S3C2410_LCDCON4_HSPW(x)	    ((x) << 0)
+#define S3C2410_LCDCON4_WLH(x)	    ((x) << 0)
+
+#define S3C2410_LCDCON4_GET_HSPW(x) ( ((x) >>  0) & 0xFF)
+
+/* framebuffer start addressed */
+#define S3C2410_LCDSADDR1   S3C2410_LCDREG(0x14)
+#define S3C2410_LCDSADDR2   S3C2410_LCDREG(0x18)
+#define S3C2410_LCDSADDR3   S3C2410_LCDREG(0x1C)
+
+#define S3C2410_LCDBANK(x)	((x) << 21)
+#define S3C2410_LCDBASEU(x)	(x)
+
+#define S3C2410_OFFSIZE(x)	((x) << 11)
+#define S3C2410_PAGEWIDTH(x)	(x)
+
+/* colour lookup and miscellaneous controls */
+
+#define S3C2410_REDLUT	   S3C2410_LCDREG(0x20)
+#define S3C2410_GREENLUT   S3C2410_LCDREG(0x24)
+#define S3C2410_BLUELUT	   S3C2410_LCDREG(0x28)
+
+#define S3C2410_DITHMODE   S3C2410_LCDREG(0x4C)
+#define S3C2410_TPAL	   S3C2410_LCDREG(0x50)
+
+#define S3C2410_TPAL_EN		(1<<24)
+
+/* interrupt info */
+#define S3C2410_LCDINTPND  S3C2410_LCDREG(0x54)
+#define S3C2410_LCDSRCPND  S3C2410_LCDREG(0x58)
+#define S3C2410_LCDINTMSK  S3C2410_LCDREG(0x5C)
+#define S3C2410_LCDINT_FIWSEL	(1<<2)
+#define	S3C2410_LCDINT_FRSYNC	(1<<1)
+#define S3C2410_LCDINT_FICNT	(1<<0)
+
+/* s3c2442 extra stn registers */
+
+#define S3C2442_REDLUT		S3C2410_LCDREG(0x20)
+#define S3C2442_GREENLUT	S3C2410_LCDREG(0x24)
+#define S3C2442_BLUELUT		S3C2410_LCDREG(0x28)
+#define S3C2442_DITHMODE	S3C2410_LCDREG(0x20)
+
+#define S3C2410_LPCSEL	   S3C2410_LCDREG(0x60)
+
+#define S3C2410_TFTPAL(x)  S3C2410_LCDREG((0x400 + (x)*4))
+
+/* S3C2412 registers */
+
+#define S3C2412_TPAL		S3C2410_LCDREG(0x20)
+
+#define S3C2412_LCDINTPND	S3C2410_LCDREG(0x24)
+#define S3C2412_LCDSRCPND	S3C2410_LCDREG(0x28)
+#define S3C2412_LCDINTMSK	S3C2410_LCDREG(0x2C)
+
+#define S3C2412_TCONSEL		S3C2410_LCDREG(0x30)
+
+#define S3C2412_LCDCON6		S3C2410_LCDREG(0x34)
+#define S3C2412_LCDCON7		S3C2410_LCDREG(0x38)
+#define S3C2412_LCDCON8		S3C2410_LCDREG(0x3C)
+#define S3C2412_LCDCON9		S3C2410_LCDREG(0x40)
+
+#define S3C2412_REDLUT(x)	S3C2410_LCDREG(0x44 + ((x)*4))
+#define S3C2412_GREENLUT(x)	S3C2410_LCDREG(0x60 + ((x)*4))
+#define S3C2412_BLUELUT(x)	S3C2410_LCDREG(0x98 + ((x)*4))
+
+#define S3C2412_FRCPAT(x)	S3C2410_LCDREG(0xB4 + ((x)*4))
+
+/* general registers */
+
+/* base of the LCD registers, where INTPND, INTSRC and then INTMSK
+ * are available. */
+
+#define S3C2410_LCDINTBASE	S3C2410_LCDREG(0x54)
+#define S3C2412_LCDINTBASE	S3C2410_LCDREG(0x24)
+
+#define S3C24XX_LCDINTPND	(0x00)
+#define S3C24XX_LCDSRCPND	(0x04)
+#define S3C24XX_LCDINTMSK	(0x08)
+
+#endif /* ___ASM_ARCH_REGS_LCD_H */
diff --git a/drivers/video/fbdev/s3c2410fb.c b/drivers/video/fbdev/s3c2410fb.c
index 6f8fa501583f..d8ae5258de46 100644
--- a/drivers/video/fbdev/s3c2410fb.c
+++ b/drivers/video/fbdev/s3c2410fb.c
@@ -29,19 +29,18 @@
 #include <linux/clk.h>
 #include <linux/cpufreq.h>
 #include <linux/io.h>
+#include <linux/platform_data/fb-s3c2410.h>
 
 #include <asm/div64.h>
 
 #include <asm/mach/map.h>
-#include <mach/regs-lcd.h>
-#include <mach/regs-gpio.h>
-#include <mach/fb.h>
 
 #ifdef CONFIG_PM
 #include <linux/pm.h>
 #endif
 
 #include "s3c2410fb.h"
+#include "s3c2410fb-regs-lcd.h"
 
 /* Debugging stuff */
 static int debug = IS_BUILTIN(CONFIG_FB_S3C2410_DEBUG);
@@ -672,6 +671,9 @@ static inline void modify_gpio(void __iomem *reg,
 {
 	unsigned long tmp;
 
+	if (!reg)
+		return;
+
 	tmp = readl(reg) & ~mask;
 	writel(tmp | set, reg);
 }
@@ -702,10 +704,10 @@ static int s3c2410fb_init_registers(struct fb_info *info)
 
 	/* modify the gpio(s) with interrupts set (bjd) */
 
-	modify_gpio(S3C2410_GPCUP,  mach_info->gpcup,  mach_info->gpcup_mask);
-	modify_gpio(S3C2410_GPCCON, mach_info->gpccon, mach_info->gpccon_mask);
-	modify_gpio(S3C2410_GPDUP,  mach_info->gpdup,  mach_info->gpdup_mask);
-	modify_gpio(S3C2410_GPDCON, mach_info->gpdcon, mach_info->gpdcon_mask);
+	modify_gpio(mach_info->gpcup_reg,  mach_info->gpcup,  mach_info->gpcup_mask);
+	modify_gpio(mach_info->gpccon_reg, mach_info->gpccon, mach_info->gpccon_mask);
+	modify_gpio(mach_info->gpdup_reg,  mach_info->gpdup,  mach_info->gpdup_mask);
+	modify_gpio(mach_info->gpdcon_reg, mach_info->gpdcon, mach_info->gpdcon_mask);
 
 	local_irq_restore(flags);
 
diff --git a/drivers/video/fbdev/sticore.h b/drivers/video/fbdev/sticore.h
index fb8f58f9867a..c338f7848ae2 100644
--- a/drivers/video/fbdev/sticore.h
+++ b/drivers/video/fbdev/sticore.h
@@ -4,12 +4,6 @@
 
 /* generic STI structures & functions */
 
-#if 0
-#define DPRINTK(x)	printk x
-#else
-#define DPRINTK(x) 
-#endif
-
 #define MAX_STI_ROMS 4		/* max no. of ROMs which this driver handles */
 
 #define STI_REGION_MAX 8	/* hardcoded STI constants */
@@ -246,8 +240,12 @@ struct sti_rom_font {
 /* sticore internal font handling */
 
 struct sti_cooked_font {
-        struct sti_rom_font *raw;
+	struct sti_rom_font *raw;	/* native ptr for STI functions */
+	void *raw_ptr;			/* kmalloc'ed font data */
 	struct sti_cooked_font *next_font;
+	int height, width;
+	int refcount;
+	u32 crc;
 };
 
 struct sti_cooked_rom {
@@ -341,9 +339,6 @@ struct sti_all_data {
 struct sti_struct {
 	spinlock_t lock;
 		
-	/* the following fields needs to be filled in by the word/byte routines */
-	int font_width;	
-	int font_height;
 	/* char **mon_strings; */
 	int sti_mem_request;
 	u32 graphics_id[2];
@@ -362,6 +357,7 @@ struct sti_struct {
 
 	struct sti_glob_cfg *glob_cfg;	/* points into sti_all_data */
 
+	int wordmode;
 	struct sti_cooked_font *font;	/* ptr to selected font (cooked) */
 
 	struct pci_dev *pd;
@@ -380,6 +376,7 @@ struct sti_struct {
 /* sticore interface functions */
 
 struct sti_struct *sti_get_rom(unsigned int index); /* 0: default sti */
+void sti_font_convert_bytemode(struct sti_struct *sti, struct sti_cooked_font *f);
 
 
 /* sticore main function to call STI firmware */
@@ -391,12 +388,14 @@ int sti_call(const struct sti_struct *sti, unsigned long func,
 
 /* functions to call the STI ROM directly */
 
-void sti_putc(struct sti_struct *sti, int c, int y, int x);
+void sti_putc(struct sti_struct *sti, int c, int y, int x,
+		struct sti_cooked_font *font);
 void sti_set(struct sti_struct *sti, int src_y, int src_x,
-	     int height, int width, u8 color);
+		int height, int width, u8 color);
 void sti_clear(struct sti_struct *sti, int src_y, int src_x,
-	       int height, int width, int c);
+		int height, int width, int c, struct sti_cooked_font *font);
 void sti_bmove(struct sti_struct *sti, int src_y, int src_x,
-	       int dst_y, int dst_x, int height, int width);
+		int dst_y, int dst_x, int height, int width,
+		struct sti_cooked_font *font);
 
 #endif	/* STICORE_H */