docs: fb: convert docs to ReST and rename to *.rst

The conversion is actually:
  - add blank lines and identation in order to identify paragraphs;
  - fix tables markups;
  - add some lists markups;
  - mark literal blocks;
  - adjust title markups.

At its new index.rst, let's add a :orphan: while this is not linked to
the main index.rst file, in order to avoid build warnings.

Also, removed the Maintained by, as requested by Geert.

Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>

4 files changed, 15 insertions, 15 deletions

diff --git a/drivers/video/fbdev/Kconfig b/drivers/video/fbdev/Kconfig
index 1b2f5f31fb6f..737b86328c9e 100644
--- a/drivers/video/fbdev/Kconfig
+++ b/drivers/video/fbdev/Kconfig
@@ -31,7 +31,7 @@ menuconfig FB
 	  in the /dev directory, i.e. /dev/fb*.
 
 	  You need an utility program called fbset to make full use of frame
-	  buffer devices. Please read <file:Documentation/fb/framebuffer.txt>
+	  buffer devices. Please read <file:Documentation/fb/framebuffer.rst>
 	  and the Framebuffer-HOWTO at
 	  <http://www.munted.org.uk/programming/Framebuffer-HOWTO-1.3.html> for more
 	  information.
@@ -241,7 +241,7 @@ config FB_CIRRUS
 	  If you have a PCI-based system, this enables support for these
 	  chips: GD-543x, GD-544x, GD-5480.
 
-	  Please read the file <file:Documentation/fb/cirrusfb.txt>.
+	  Please read the file <file:Documentation/fb/cirrusfb.rst>.
 
 	  Say N unless you have such a graphics board or plan to get one
 	  before you next recompile the kernel.
@@ -614,7 +614,7 @@ config FB_UVESA
 
 	  This driver generally provides more features than vesafb but
 	  requires a userspace helper application called 'v86d'. See
-	  <file:Documentation/fb/uvesafb.txt> for more information.
+	  <file:Documentation/fb/uvesafb.rst> for more information.
 
 	  If unsure, say N.
 
@@ -629,7 +629,7 @@ config FB_VESA
 	  This is the frame buffer device driver for generic VESA 2.0
 	  compliant graphic cards. The older VESA 1.2 cards are not supported.
 	  You will get a boot time penguin logo at no additional cost. Please
-	  read <file:Documentation/fb/vesafb.txt>. If unsure, say Y.
+	  read <file:Documentation/fb/vesafb.rst>. If unsure, say Y.
 
 config FB_EFI
 	bool "EFI-based Framebuffer Support"
@@ -825,7 +825,7 @@ config FB_PVR2
 	  module load time.  The parameters look like "video=pvr2:XXX", where
 	  the meaning of XXX can be found at the end of the main source file
 	  (<file:drivers/video/pvr2fb.c>). Please see the file
-	  <file:Documentation/fb/pvr2fb.txt>.
+	  <file:Documentation/fb/pvr2fb.rst>.
 
 config FB_OPENCORES
 	tristate "OpenCores VGA/LCD core 2.0 framebuffer support"
@@ -987,7 +987,7 @@ config FB_I810
 	  module will be called i810fb.
 
 	  For more information, please read
-	  <file:Documentation/fb/intel810.txt>
+	  <file:Documentation/fb/intel810.rst>
 
 config FB_I810_GTF
 	bool "use VESA Generalized Timing Formula"
@@ -1057,7 +1057,7 @@ config FB_INTEL
 	  To compile this driver as a module, choose M here: the
 	  module will be called intelfb.
 
-	  For more information, please read <file:Documentation/fb/intelfb.txt>
+	  For more information, please read <file:Documentation/fb/intelfb.rst>
 
 config FB_INTEL_DEBUG
 	bool "Intel driver Debug Messages"
@@ -1094,7 +1094,7 @@ config FB_MATROX
 
 	  You can pass several parameters to the driver at boot time or at
 	  module load time. The parameters look like "video=matroxfb:XXX", and
-	  are described in <file:Documentation/fb/matroxfb.txt>.
+	  are described in <file:Documentation/fb/matroxfb.rst>.
 
 config FB_MATROX_MILLENIUM
 	bool "Millennium I/II support"
@@ -1245,7 +1245,7 @@ config FB_ATY128
 	help
 	  This driver supports graphics boards with the ATI Rage128 chips.
 	  Say Y if you have such a graphics board and read
-	  <file:Documentation/fb/aty128fb.txt>.
+	  <file:Documentation/fb/aty128fb.rst>.
 
 	  To compile this driver as a module, choose M here: the
 	  module will be called aty128fb.
@@ -1507,7 +1507,7 @@ config FB_VOODOO1
 
 	  WARNING: Do not use any application that uses the 3D engine
 	  (namely glide) while using this driver.
-	  Please read the <file:Documentation/fb/sstfb.txt> for supported
+	  Please read the <file:Documentation/fb/sstfb.rst> for supported
 	  options and other important info  support.
 
 config FB_VT8623
@@ -1539,7 +1539,7 @@ config FB_TRIDENT
 	  There are also integrated versions of these chips called CyberXXXX,
 	  CyberImage or CyberBlade. These chips are mostly found in laptops
 	  but also on some motherboards including early VIA EPIA motherboards.
-	  For more information, read <file:Documentation/fb/tridentfb.txt>
+	  For more information, read <file:Documentation/fb/tridentfb.rst>
 
 	  Say Y if you have such a graphics board.
 
@@ -1778,7 +1778,7 @@ config FB_PXA_PARAMETERS
 	  single model of flatpanel then you can safely leave this
 	  option disabled.
 
-	  <file:Documentation/fb/pxafb.txt> describes the available parameters.
+	  <file:Documentation/fb/pxafb.rst> describes the available parameters.
 
 config PXA3XX_GCU
 	tristate "PXA3xx 2D graphics accelerator driver"
diff --git a/drivers/video/fbdev/matrox/matroxfb_base.c b/drivers/video/fbdev/matrox/matroxfb_base.c
index c76bef078c75..1a555f70923a 100644
--- a/drivers/video/fbdev/matrox/matroxfb_base.c
+++ b/drivers/video/fbdev/matrox/matroxfb_base.c
@@ -2502,7 +2502,7 @@ MODULE_PARM_DESC(nobios, "Disables ROM BIOS (0 or 1=disabled) (default=do not ch
 module_param(noinit, int, 0);
 MODULE_PARM_DESC(noinit, "Disables W/SG/SD-RAM and bus interface initialization (0 or 1=do not initialize) (default=0)");
 module_param(memtype, int, 0);
-MODULE_PARM_DESC(memtype, "Memory type for G200/G400 (see Documentation/fb/matroxfb.txt for explanation) (default=3 for G200, 0 for G400)");
+MODULE_PARM_DESC(memtype, "Memory type for G200/G400 (see Documentation/fb/matroxfb.rst for explanation) (default=3 for G200, 0 for G400)");
 module_param(mtrr, int, 0);
 MODULE_PARM_DESC(mtrr, "This speeds up video memory accesses (0=disabled or 1) (default=1)");
 module_param(sgram, int, 0);
diff --git a/drivers/video/fbdev/pxafb.c b/drivers/video/fbdev/pxafb.c
index d59c8a59f582..4282cb117b92 100644
--- a/drivers/video/fbdev/pxafb.c
+++ b/drivers/video/fbdev/pxafb.c
@@ -2068,7 +2068,7 @@ static int __init pxafb_setup_options(void)
 #define pxafb_setup_options()		(0)
 
 module_param_string(options, g_options, sizeof(g_options), 0);
-MODULE_PARM_DESC(options, "LCD parameters (see Documentation/fb/pxafb.txt)");
+MODULE_PARM_DESC(options, "LCD parameters (see Documentation/fb/pxafb.rst)");
 #endif
 
 #else
diff --git a/drivers/video/fbdev/sh7760fb.c b/drivers/video/fbdev/sh7760fb.c
index 405715b60ec7..ab8fe838c776 100644
--- a/drivers/video/fbdev/sh7760fb.c
+++ b/drivers/video/fbdev/sh7760fb.c
@@ -6,7 +6,7 @@
  *             Manuel Lauss <mano@roarinelk.homelinux.net>
  * (c) 2008 Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
  *
- * PLEASE HAVE A LOOK AT Documentation/fb/sh7760fb.txt!
+ * PLEASE HAVE A LOOK AT Documentation/fb/sh7760fb.rst!
  *
  * Thanks to Siegfried Schaefer <s.schaefer at schaefer-edv.de>
  *     for his original source and testing!