Merge branch 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm

* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: (212 commits)
  [ARM] pxa: Phycore pcm-990-specific code for the PXA270 Quick Capture driver
  [ARM] pxa: V4L2 soc_camera driver for PXA270
  [ARM] pxa: restrict availability of pxa2xx PCMCIA drivers
  [ARM] 5005/1: BAST: Fix kset_name initialiser
  [ARM] 4967/1: Adds functions to set clkout rate for Samsung S3C2410
  [ARM] 4988/1: Add GPIO lib support to the EP93xx
  [ARM] Add initial sparsemem support
  [ARM] pxa: initialise PXA devices before platform init code
  [ARM] 5002/1: tosa: add two more leds
  [ARM] 5004/1: Tosa: make several unreferenced structures static.
  [ARM] 5003/1: Shut up sparse warnings
  [ARM] 4977/2: soc - pxa2xx-ac97 - Add missing clk_enable()
  [ARM] 4976/1: zylonite: Configure GPIO for WM9713 IRQ line
  [ARM] 4974/1: Drop unused leds-tosa.
  [ARM] 4973/1: Tosa: use leds-gpio driver.
  [ARM] 4972/1: Tosa: convert scoop GPIOs usage to generic gpio code
  [ARM] 4971/1: pxaficp_ir: provide startup and shutdown hooks
  [ARM] pxa: lubbock: move mis-placed SPI info
  [ARM] 4970/1: tosa: correct gpio used for wake up.
  [ARM] 4966/1: magician: add MFP pin configuration
  ...

2 files changed, 35 insertions, 4 deletions

diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c
index 46ee7f4c0912..85074cb36f38 100644
--- a/drivers/usb/host/ehci-hcd.c
+++ b/drivers/usb/host/ehci-hcd.c
@@ -1033,7 +1033,7 @@ MODULE_LICENSE ("GPL");
 #define OF_PLATFORM_DRIVER	ehci_hcd_ppc_of_driver
 #endif
 
-#ifdef CONFIG_ARCH_ORION
+#ifdef CONFIG_PLAT_ORION
 #include "ehci-orion.c"
 #define	PLATFORM_DRIVER		ehci_orion_driver
 #endif
diff --git a/drivers/usb/host/ehci-orion.c b/drivers/usb/host/ehci-orion.c
index e129981f139f..d187d0313742 100644
--- a/drivers/usb/host/ehci-orion.c
+++ b/drivers/usb/host/ehci-orion.c
@@ -11,15 +11,18 @@
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/platform_device.h>
-#include <asm/arch/orion.h>
+#include <linux/mbus.h>
+#include <asm/plat-orion/ehci-orion.h>
 
 #define rdl(off)	__raw_readl(hcd->regs + (off))
 #define wrl(off, val)	__raw_writel((val), hcd->regs + (off))
 
-#define USB_CAUSE		0x310
-#define USB_MASK		0x314
 #define USB_CMD			0x140
 #define USB_MODE		0x1a8
+#define USB_CAUSE		0x310
+#define USB_MASK		0x314
+#define USB_WINDOW_CTRL(i)	(0x320 + ((i) << 4))
+#define USB_WINDOW_BASE(i)	(0x324 + ((i) << 4))
 #define USB_IPG			0x360
 #define USB_PHY_PWR_CTRL	0x400
 #define USB_PHY_TX_CTRL		0x420
@@ -162,8 +165,30 @@ static const struct hc_driver ehci_orion_hc_driver = {
 	.bus_resume = ehci_bus_resume,
 };
 
+static void __init
+ehci_orion_conf_mbus_windows(struct usb_hcd *hcd,
+				struct mbus_dram_target_info *dram)
+{
+	int i;
+
+	for (i = 0; i < 4; i++) {
+		wrl(USB_WINDOW_CTRL(i), 0);
+		wrl(USB_WINDOW_BASE(i), 0);
+	}
+
+	for (i = 0; i < dram->num_cs; i++) {
+		struct mbus_dram_window *cs = dram->cs + i;
+
+		wrl(USB_WINDOW_CTRL(i), ((cs->size - 1) & 0xffff0000) |
+					(cs->mbus_attr << 8) |
+					(dram->mbus_dram_target_id << 4) | 1);
+		wrl(USB_WINDOW_BASE(i), cs->base);
+	}
+}
+
 static int __init ehci_orion_drv_probe(struct platform_device *pdev)
 {
+	struct orion_ehci_data *pd = pdev->dev.platform_data;
 	struct resource *res;
 	struct usb_hcd *hcd;
 	struct ehci_hcd *ehci;
@@ -227,6 +252,12 @@ static int __init ehci_orion_drv_probe(struct platform_device *pdev)
 	ehci->sbrn = 0x20;
 
 	/*
+	 * (Re-)program MBUS remapping windows if we are asked to.
+	 */
+	if (pd != NULL && pd->dram != NULL)
+		ehci_orion_conf_mbus_windows(hcd, pd->dram);
+
+	/*
 	 * setup Orion USB controller
 	 */
 	orion_usb_setup(hcd);