Input: move USB tablets under drivers/input/tablet

This will allow concentrating all input devices in one place
in {menu|x|q}config.

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>

10 files changed, 0 insertions, 5047 deletions

diff --git a/drivers/usb/input/Kconfig b/drivers/usb/input/Kconfig
index a792e42f58af..86cad900c659 100644
--- a/drivers/usb/input/Kconfig
+++ b/drivers/usb/input/Kconfig
@@ -4,54 +4,6 @@
 comment "USB Input Devices"
 	depends on USB
 
-config USB_AIPTEK
-	tristate "Aiptek 6000U/8000U tablet support"
-	depends on USB && INPUT
-	help
-	  Say Y here if you want to use the USB version of the Aiptek 6000U
-	  or Aiptek 8000U tablet.  Make sure to say Y to "Mouse support"
-	  (CONFIG_INPUT_MOUSEDEV) and/or "Event interface support"
-	  (CONFIG_INPUT_EVDEV) as well.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called aiptek.
-
-config USB_WACOM
-	tristate "Wacom Intuos/Graphire tablet support"
-	depends on USB && INPUT
-	help
-	  Say Y here if you want to use the USB version of the Wacom Intuos
-	  or Graphire tablet.  Make sure to say Y to "Mouse support"
-	  (CONFIG_INPUT_MOUSEDEV) and/or "Event interface support"
-	  (CONFIG_INPUT_EVDEV) as well.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called wacom.
-
-config USB_ACECAD
-	tristate "Acecad Flair tablet support"
-	depends on USB && INPUT
-	help
-	  Say Y here if you want to use the USB version of the Acecad Flair
-	  tablet.  Make sure to say Y to "Mouse support"
-	  (CONFIG_INPUT_MOUSEDEV) and/or "Event interface support"
-	  (CONFIG_INPUT_EVDEV) as well.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called acecad.
-
-config USB_KBTAB
-	tristate "KB Gear JamStudio tablet support"
-	depends on USB && INPUT
-	help
-	  Say Y here if you want to use the USB version of the KB Gear
-	  JamStudio tablet.  Make sure to say Y to "Mouse support"
-	  (CONFIG_INPUT_MOUSEDEV) and/or "Event interface support"
-	  (CONFIG_INPUT_EVDEV) as well.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called kbtab.
-
 config USB_POWERMATE
 	tristate "Griffin PowerMate and Contour Jog support"
 	depends on USB && INPUT
@@ -211,15 +163,3 @@ config USB_APPLETOUCH
 
 	  To compile this driver as a module, choose M here: the
 	  module will be called appletouch.
-
-config USB_GTCO
-        tristate "GTCO CalComp/InterWrite USB Support"
-        depends on USB && INPUT
-        ---help---
-          Say Y here if you want to use the USB version of the GTCO
-          CalComp/InterWrite Tablet.  Make sure to say Y to "Mouse support"
-          (CONFIG_INPUT_MOUSEDEV) and/or "Event interface support"
-          (CONFIG_INPUT_EVDEV) as well.
-
-          To compile this driver as a module, choose M here: the
-          module will be called gtco.
diff --git a/drivers/usb/input/Makefile b/drivers/usb/input/Makefile
index 284a0734e0cd..a9e9b2fc5e72 100644
--- a/drivers/usb/input/Makefile
+++ b/drivers/usb/input/Makefile
@@ -2,22 +2,14 @@
 # Makefile for the USB input drivers
 #
 
-# Multipart objects.
-wacom-objs	:= wacom_wac.o wacom_sys.o
-
-obj-$(CONFIG_USB_AIPTEK)	+= aiptek.o
 obj-$(CONFIG_USB_ATI_REMOTE)	+= ati_remote.o
 obj-$(CONFIG_USB_ATI_REMOTE2)	+= ati_remote2.o
-obj-$(CONFIG_USB_KBTAB)		+= kbtab.o
 obj-$(CONFIG_USB_KEYSPAN_REMOTE)	+= keyspan_remote.o
 obj-$(CONFIG_USB_TOUCHSCREEN)	+= usbtouchscreen.o
 obj-$(CONFIG_USB_POWERMATE)	+= powermate.o
-obj-$(CONFIG_USB_WACOM)		+= wacom.o
-obj-$(CONFIG_USB_ACECAD)	+= acecad.o
 obj-$(CONFIG_USB_YEALINK)	+= yealink.o
 obj-$(CONFIG_USB_XPAD)		+= xpad.o
 obj-$(CONFIG_USB_APPLETOUCH)	+= appletouch.o
-obj-$(CONFIG_USB_GTCO)		+= gtco.o
 
 ifeq ($(CONFIG_USB_DEBUG),y)
 EXTRA_CFLAGS += -DDEBUG
diff --git a/drivers/usb/input/acecad.c b/drivers/usb/input/acecad.c
deleted file mode 100644
index dd2310458c46..000000000000
--- a/drivers/usb/input/acecad.c
+++ /dev/null
@@ -1,289 +0,0 @@
-/*
- *  Copyright (c) 2001-2005 Edouard TISSERANT   <edouard.tisserant@wanadoo.fr>
- *  Copyright (c) 2004-2005 Stephane VOLTZ      <svoltz@numericable.fr>
- *
- *  USB Acecad "Acecad Flair" tablet support
- *
- *  Changelog:
- *      v3.2 - Added sysfs support
- */
-
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/slab.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/usb/input.h>
-
-/*
- * Version Information
- */
-#define DRIVER_VERSION "v3.2"
-#define DRIVER_DESC    "USB Acecad Flair tablet driver"
-#define DRIVER_LICENSE "GPL"
-#define DRIVER_AUTHOR  "Edouard TISSERANT <edouard.tisserant@wanadoo.fr>"
-
-MODULE_AUTHOR(DRIVER_AUTHOR);
-MODULE_DESCRIPTION(DRIVER_DESC);
-MODULE_LICENSE(DRIVER_LICENSE);
-
-#define USB_VENDOR_ID_ACECAD	0x0460
-#define USB_DEVICE_ID_FLAIR	0x0004
-#define USB_DEVICE_ID_302	0x0008
-
-struct usb_acecad {
-	char name[128];
-	char phys[64];
-	struct usb_device *usbdev;
-	struct input_dev *input;
-	struct urb *irq;
-
-	unsigned char *data;
-	dma_addr_t data_dma;
-};
-
-static void usb_acecad_irq(struct urb *urb)
-{
-	struct usb_acecad *acecad = urb->context;
-	unsigned char *data = acecad->data;
-	struct input_dev *dev = acecad->input;
-	int prox, status;
-
-	switch (urb->status) {
-		case 0:
-			/* success */
-			break;
-		case -ECONNRESET:
-		case -ENOENT:
-		case -ESHUTDOWN:
-			/* this urb is terminated, clean up */
-			dbg("%s - urb shutting down with status: %d", __FUNCTION__, urb->status);
-			return;
-		default:
-			dbg("%s - nonzero urb status received: %d", __FUNCTION__, urb->status);
-			goto resubmit;
-	}
-
-	prox = (data[0] & 0x04) >> 2;
-	input_report_key(dev, BTN_TOOL_PEN, prox);
-
-	if (prox) {
-		int x = data[1] | (data[2] << 8);
-		int y = data[3] | (data[4] << 8);
-		/* Pressure should compute the same way for flair and 302 */
-		int pressure = data[5] | (data[6] << 8);
-		int touch = data[0] & 0x01;
-		int stylus = (data[0] & 0x10) >> 4;
-		int stylus2 = (data[0] & 0x20) >> 5;
-		input_report_abs(dev, ABS_X, x);
-		input_report_abs(dev, ABS_Y, y);
-		input_report_abs(dev, ABS_PRESSURE, pressure);
-		input_report_key(dev, BTN_TOUCH, touch);
-		input_report_key(dev, BTN_STYLUS, stylus);
-		input_report_key(dev, BTN_STYLUS2, stylus2);
-	}
-
-	/* event termination */
-	input_sync(dev);
-
-resubmit:
-	status = usb_submit_urb(urb, GFP_ATOMIC);
-	if (status)
-		err("can't resubmit intr, %s-%s/input0, status %d",
-			acecad->usbdev->bus->bus_name, acecad->usbdev->devpath, status);
-}
-
-static int usb_acecad_open(struct input_dev *dev)
-{
-	struct usb_acecad *acecad = input_get_drvdata(dev);
-
-	acecad->irq->dev = acecad->usbdev;
-	if (usb_submit_urb(acecad->irq, GFP_KERNEL))
-		return -EIO;
-
-	return 0;
-}
-
-static void usb_acecad_close(struct input_dev *dev)
-{
-	struct usb_acecad *acecad = input_get_drvdata(dev);
-
-	usb_kill_urb(acecad->irq);
-}
-
-static int usb_acecad_probe(struct usb_interface *intf, const struct usb_device_id *id)
-{
-	struct usb_device *dev = interface_to_usbdev(intf);
-	struct usb_host_interface *interface = intf->cur_altsetting;
-	struct usb_endpoint_descriptor *endpoint;
-	struct usb_acecad *acecad;
-	struct input_dev *input_dev;
-	int pipe, maxp;
-	int err = -ENOMEM;
-
-	if (interface->desc.bNumEndpoints != 1)
-		return -ENODEV;
-
-	endpoint = &interface->endpoint[0].desc;
-
-	if (!usb_endpoint_is_int_in(endpoint))
-		return -ENODEV;
-
-	pipe = usb_rcvintpipe(dev, endpoint->bEndpointAddress);
-	maxp = usb_maxpacket(dev, pipe, usb_pipeout(pipe));
-
-	acecad = kzalloc(sizeof(struct usb_acecad), GFP_KERNEL);
-	input_dev = input_allocate_device();
-	if (!acecad || !input_dev) {
-		err = -ENOMEM;
-		goto fail1;
-	}
-
-	acecad->data = usb_buffer_alloc(dev, 8, GFP_KERNEL, &acecad->data_dma);
-	if (!acecad->data) {
-		err= -ENOMEM;
-		goto fail1;
-	}
-
-	acecad->irq = usb_alloc_urb(0, GFP_KERNEL);
-	if (!acecad->irq) {
-		err = -ENOMEM;
-		goto fail2;
-	}
-
-	acecad->usbdev = dev;
-	acecad->input = input_dev;
-
-	if (dev->manufacturer)
-		strlcpy(acecad->name, dev->manufacturer, sizeof(acecad->name));
-
-	if (dev->product) {
-		if (dev->manufacturer)
-			strlcat(acecad->name, " ", sizeof(acecad->name));
-		strlcat(acecad->name, dev->product, sizeof(acecad->name));
-	}
-
-	usb_make_path(dev, acecad->phys, sizeof(acecad->phys));
-	strlcat(acecad->phys, "/input0", sizeof(acecad->phys));
-
-	input_dev->name = acecad->name;
-	input_dev->phys = acecad->phys;
-	usb_to_input_id(dev, &input_dev->id);
-	input_dev->dev.parent = &intf->dev;
-
-	input_set_drvdata(input_dev, acecad);
-
-	input_dev->open = usb_acecad_open;
-	input_dev->close = usb_acecad_close;
-
-	input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_ABS);
-	input_dev->absbit[0] = BIT(ABS_X) | BIT(ABS_Y) | BIT(ABS_PRESSURE);
-	input_dev->keybit[LONG(BTN_LEFT)] = BIT(BTN_LEFT) | BIT(BTN_RIGHT) | BIT(BTN_MIDDLE);
-	input_dev->keybit[LONG(BTN_DIGI)] = BIT(BTN_TOOL_PEN) |BIT(BTN_TOUCH) | BIT(BTN_STYLUS) | BIT(BTN_STYLUS2);
-
-	switch (id->driver_info) {
-		case 0:
-			input_dev->absmax[ABS_X] = 5000;
-			input_dev->absmax[ABS_Y] = 3750;
-			input_dev->absmax[ABS_PRESSURE] = 512;
-			if (!strlen(acecad->name))
-				snprintf(acecad->name, sizeof(acecad->name),
-					"USB Acecad Flair Tablet %04x:%04x",
-					le16_to_cpu(dev->descriptor.idVendor),
-					le16_to_cpu(dev->descriptor.idProduct));
-			break;
-		case 1:
-			input_dev->absmax[ABS_X] = 3000;
-			input_dev->absmax[ABS_Y] = 2250;
-			input_dev->absmax[ABS_PRESSURE] = 1024;
-			if (!strlen(acecad->name))
-				snprintf(acecad->name, sizeof(acecad->name),
-					"USB Acecad 302 Tablet %04x:%04x",
-					le16_to_cpu(dev->descriptor.idVendor),
-					le16_to_cpu(dev->descriptor.idProduct));
-			break;
-	}
-
-	input_dev->absfuzz[ABS_X] = 4;
-	input_dev->absfuzz[ABS_Y] = 4;
-
-	usb_fill_int_urb(acecad->irq, dev, pipe,
-			acecad->data, maxp > 8 ? 8 : maxp,
-			usb_acecad_irq, acecad, endpoint->bInterval);
-	acecad->irq->transfer_dma = acecad->data_dma;
-	acecad->irq->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
-
-	err = input_register_device(acecad->input);
-	if (err)
-		goto fail2;
-
-	usb_set_intfdata(intf, acecad);
-
-	return 0;
-
- fail2:	usb_buffer_free(dev, 8, acecad->data, acecad->data_dma);
- fail1: input_free_device(input_dev);
-	kfree(acecad);
-	return err;
-}
-
-static void usb_acecad_disconnect(struct usb_interface *intf)
-{
-	struct usb_acecad *acecad = usb_get_intfdata(intf);
-
-	usb_set_intfdata(intf, NULL);
-	if (acecad) {
-		usb_kill_urb(acecad->irq);
-		input_unregister_device(acecad->input);
-		usb_free_urb(acecad->irq);
-		usb_buffer_free(interface_to_usbdev(intf), 10, acecad->data, acecad->data_dma);
-		kfree(acecad);
-	}
-}
-
-static struct usb_device_id usb_acecad_id_table [] = {
-	{ USB_DEVICE(USB_VENDOR_ID_ACECAD, USB_DEVICE_ID_FLAIR), .driver_info = 0 },
-	{ USB_DEVICE(USB_VENDOR_ID_ACECAD, USB_DEVICE_ID_302),	 .driver_info = 1 },
-	{ }
-};
-
-MODULE_DEVICE_TABLE(usb, usb_acecad_id_table);
-
-static struct usb_driver usb_acecad_driver = {
-	.name =		"usb_acecad",
-	.probe =	usb_acecad_probe,
-	.disconnect =	usb_acecad_disconnect,
-	.id_table =	usb_acecad_id_table,
-};
-
-static int __init usb_acecad_init(void)
-{
-	int result = usb_register(&usb_acecad_driver);
-	if (result == 0)
-		info(DRIVER_VERSION ":" DRIVER_DESC);
-	return result;
-}
-
-static void __exit usb_acecad_exit(void)
-{
-	usb_deregister(&usb_acecad_driver);
-}
-
-module_init(usb_acecad_init);
-module_exit(usb_acecad_exit);
diff --git a/drivers/usb/input/aiptek.c b/drivers/usb/input/aiptek.c
deleted file mode 100644
index cc0a498763d8..000000000000
--- a/drivers/usb/input/aiptek.c
+++ /dev/null
@@ -1,2236 +0,0 @@
-/*
- *  Native support for the Aiptek HyperPen USB Tablets
- *  (4000U/5000U/6000U/8000U/12000U)
- *
- *  Copyright (c) 2001      Chris Atenasio   <chris@crud.net>
- *  Copyright (c) 2002-2004 Bryan W. Headley <bwheadley@earthlink.net>
- *
- *  based on wacom.c by
- *     Vojtech Pavlik      <vojtech@suse.cz>
- *     Andreas Bach Aaen   <abach@stofanet.dk>
- *     Clifford Wolf       <clifford@clifford.at>
- *     Sam Mosel           <sam.mosel@computer.org>
- *     James E. Blair      <corvus@gnu.org>
- *     Daniel Egger        <egger@suse.de>
- *
- *  Many thanks to Oliver Kuechemann for his support.
- *
- *  ChangeLog:
- *      v0.1 - Initial release
- *      v0.2 - Hack to get around fake event 28's. (Bryan W. Headley)
- *      v0.3 - Make URB dynamic (Bryan W. Headley, Jun-8-2002)
- *             Released to Linux 2.4.19 and 2.5.x
- *      v0.4 - Rewrote substantial portions of the code to deal with
- *             corrected control sequences, timing, dynamic configuration,
- *             support of 6000U - 12000U, procfs, and macro key support
- *             (Jan-1-2003 - Feb-5-2003, Bryan W. Headley)
- *      v1.0 - Added support for diagnostic messages, count of messages
- *             received from URB - Mar-8-2003, Bryan W. Headley
- *      v1.1 - added support for tablet resolution, changed DV and proximity
- *             some corrections - Jun-22-2003, martin schneebacher
- *           - Added support for the sysfs interface, deprecating the
- *             procfs interface for 2.5.x kernel. Also added support for
- *             Wheel command. Bryan W. Headley July-15-2003.
- *      v1.2 - Reworked jitter timer as a kernel thread.
- *             Bryan W. Headley November-28-2003/Jan-10-2004.
- *      v1.3 - Repaired issue of kernel thread going nuts on single-processor
- *             machines, introduced programmableDelay as a command line
- *             parameter. Feb 7 2004, Bryan W. Headley.
- *      v1.4 - Re-wire jitter so it does not require a thread. Courtesy of
- *             Rene van Paassen. Added reporting of physical pointer device
- *             (e.g., stylus, mouse in reports 2, 3, 4, 5. We don't know
- *             for reports 1, 6.)
- *             what physical device reports for reports 1, 6.) Also enabled
- *             MOUSE and LENS tool button modes. Renamed "rubber" to "eraser".
- *             Feb 20, 2004, Bryan W. Headley.
- *      v1.5 - Added previousJitterable, so we don't do jitter delay when the
- *             user is holding a button down for periods of time.
- *
- * NOTE:
- *      This kernel driver is augmented by the "Aiptek" XFree86 input
- *      driver for your X server, as well as the Gaiptek GUI Front-end
- *      "Tablet Manager".
- *      These three products are highly interactive with one another,
- *      so therefore it's easier to document them all as one subsystem.
- *      Please visit the project's "home page", located at,
- *      http://aiptektablet.sourceforge.net.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#include <linux/jiffies.h>
-#include <linux/kernel.h>
-#include <linux/slab.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/usb/input.h>
-#include <asm/uaccess.h>
-#include <asm/unaligned.h>
-
-/*
- * Version Information
- */
-#define DRIVER_VERSION "v1.5 (May-15-2004)"
-#define DRIVER_AUTHOR  "Bryan W. Headley/Chris Atenasio"
-#define DRIVER_DESC    "Aiptek HyperPen USB Tablet Driver (Linux 2.6.x)"
-
-/*
- * Aiptek status packet:
- *
- * (returned as Report 1 - relative coordinates from mouse and stylus)
- *
- *        bit7  bit6  bit5  bit4  bit3  bit2  bit1  bit0
- * byte0   0     0     0     0     0     0     0     1
- * byte1   0     0     0     0     0    BS2   BS    Tip
- * byte2  X7    X6    X5    X4    X3    X2    X1    X0
- * byte3  Y7    Y6    Y5    Y4    Y3    Y2    Y1    Y0
- *
- * (returned as Report 2 - absolute coordinates from the stylus)
- *
- *        bit7  bit6  bit5  bit4  bit3  bit2  bit1  bit0
- * byte0   0     0     0     0     0     0     1     0
- * byte1  X7    X6    X5    X4    X3    X2    X1    X0
- * byte2  X15   X14   X13   X12   X11   X10   X9    X8
- * byte3  Y7    Y6    Y5    Y4    Y3    Y2    Y1    Y0
- * byte4  Y15   Y14   Y13   Y12   Y11   Y10   Y9    Y8
- * byte5   *     *     *    BS2   BS1   Tip   IR    DV
- * byte6  P7    P6    P5    P4    P3    P2    P1    P0
- * byte7  P15   P14   P13   P12   P11   P10   P9    P8
- *
- * (returned as Report 3 - absolute coordinates from the mouse)
- *
- *        bit7  bit6  bit5  bit4  bit3  bit2  bit1  bit0
- * byte0   0     0     0     0     0     0     1     0
- * byte1  X7    X6    X5    X4    X3    X2    X1    X0
- * byte2  X15   X14   X13   X12   X11   X10   X9    X8
- * byte3  Y7    Y6    Y5    Y4    Y3    Y2    Y1    Y0
- * byte4  Y15   Y14   Y13   Y12   Y11   Y10   Y9    Y8
- * byte5   *     *     *    BS2   BS1   Tip   IR    DV
- * byte6  P7    P6    P5    P4    P3    P2    P1    P0
- * byte7  P15   P14   P13   P12   P11   P10   P9    P8
- *
- * (returned as Report 4 - macrokeys from the stylus)
- *
- *        bit7  bit6  bit5  bit4  bit3  bit2  bit1  bit0
- * byte0   0     0     0     0     0     1     0     0
- * byte1   0     0     0    BS2   BS    Tip   IR    DV
- * byte2   0     0     0     0     0     0     1     0
- * byte3   0     0     0    K4    K3    K2    K1    K0
- * byte4  P7    P6    P5    P4    P3    P2    P1    P0
- * byte5  P15   P14   P13   P12   P11   P10   P9    P8
- *
- * (returned as Report 5 - macrokeys from the mouse)
- *
- *        bit7  bit6  bit5  bit4  bit3  bit2  bit1  bit0
- * byte0   0     0     0     0     0     1     0     0
- * byte1   0     0     0    BS2   BS    Tip   IR    DV
- * byte2   0     0     0     0     0     0     1     0
- * byte3   0     0     0    K4    K3    K2    K1    K0
- * byte4  P7    P6    P5    P4    P3    P2    P1    P0
- * byte5  P15   P14   P13   P12   P11   P10   P9    P8
- *
- * IR: In Range = Proximity on
- * DV = Data Valid
- * BS = Barrel Switch (as in, macro keys)
- * BS2 also referred to as Tablet Pick
- *
- * Command Summary:
- *
- * Use report_type CONTROL (3)
- * Use report_id   2
- *
- * Command/Data    Description     Return Bytes    Return Value
- * 0x10/0x00       SwitchToMouse       0
- * 0x10/0x01       SwitchToTablet      0
- * 0x18/0x04       SetResolution       0
- * 0x12/0xFF       AutoGainOn          0
- * 0x17/0x00       FilterOn            0
- * 0x01/0x00       GetXExtension       2           MaxX
- * 0x01/0x01       GetYExtension       2           MaxY
- * 0x02/0x00       GetModelCode        2           ModelCode = LOBYTE
- * 0x03/0x00       GetODMCode          2           ODMCode
- * 0x08/0x00       GetPressureLevels   2           =512
- * 0x04/0x00       GetFirmwareVersion  2           Firmware Version
- * 0x11/0x02       EnableMacroKeys     0
- *
- * To initialize the tablet:
- *
- * (1) Send Resolution500LPI (Command)
- * (2) Query for Model code (Option Report)
- * (3) Query for ODM code (Option Report)
- * (4) Query for firmware (Option Report)
- * (5) Query for GetXExtension (Option Report)
- * (6) Query for GetYExtension (Option Report)
- * (7) Query for GetPressureLevels (Option Report)
- * (8) SwitchToTablet for Absolute coordinates, or
- *     SwitchToMouse for Relative coordinates (Command)
- * (9) EnableMacroKeys (Command)
- * (10) FilterOn (Command)
- * (11) AutoGainOn (Command)
- *
- * (Step 9 can be omitted, but you'll then have no function keys.)
- */
-
-#define USB_VENDOR_ID_AIPTEK				0x08ca
-#define USB_REQ_GET_REPORT				0x01
-#define USB_REQ_SET_REPORT				0x09
-
-	/* PointerMode codes
-	 */
-#define AIPTEK_POINTER_ONLY_MOUSE_MODE			0
-#define AIPTEK_POINTER_ONLY_STYLUS_MODE			1
-#define AIPTEK_POINTER_EITHER_MODE			2
-
-#define AIPTEK_POINTER_ALLOW_MOUSE_MODE(a)		\
-	(a == AIPTEK_POINTER_ONLY_MOUSE_MODE ||		\
-	 a == AIPTEK_POINTER_EITHER_MODE)
-#define AIPTEK_POINTER_ALLOW_STYLUS_MODE(a)		\
-	(a == AIPTEK_POINTER_ONLY_STYLUS_MODE ||	\
-	 a == AIPTEK_POINTER_EITHER_MODE)
-
-	/* CoordinateMode code
-	 */
-#define AIPTEK_COORDINATE_RELATIVE_MODE			0
-#define AIPTEK_COORDINATE_ABSOLUTE_MODE			1
-
-       /* XTilt and YTilt values
-        */
-#define AIPTEK_TILT_MIN					(-128)
-#define AIPTEK_TILT_MAX					127
-#define AIPTEK_TILT_DISABLE				(-10101)
-
-	/* Wheel values
-	 */
-#define AIPTEK_WHEEL_MIN				0
-#define AIPTEK_WHEEL_MAX				1024
-#define AIPTEK_WHEEL_DISABLE				(-10101)
-
-	/* ToolCode values, which BTW are 0x140 .. 0x14f
-	 * We have things set up such that if TOOL_BUTTON_FIRED_BIT is
-	 * not set, we'll send one instance of AIPTEK_TOOL_BUTTON_xxx.
-	 *
-	 * Whenever the user resets the value, TOOL_BUTTON_FIRED_BIT will
-	 * get reset.
-	 */
-#define TOOL_BUTTON(x)					((x) & 0x14f)
-#define TOOL_BUTTON_FIRED(x)				((x) & 0x200)
-#define TOOL_BUTTON_FIRED_BIT				0x200
-	/* toolMode codes
-	 */
-#define AIPTEK_TOOL_BUTTON_PEN_MODE			BTN_TOOL_PEN
-#define AIPTEK_TOOL_BUTTON_PEN_MODE			BTN_TOOL_PEN
-#define AIPTEK_TOOL_BUTTON_PENCIL_MODE			BTN_TOOL_PENCIL
-#define AIPTEK_TOOL_BUTTON_BRUSH_MODE			BTN_TOOL_BRUSH
-#define AIPTEK_TOOL_BUTTON_AIRBRUSH_MODE		BTN_TOOL_AIRBRUSH
-#define AIPTEK_TOOL_BUTTON_ERASER_MODE			BTN_TOOL_RUBBER
-#define AIPTEK_TOOL_BUTTON_MOUSE_MODE			BTN_TOOL_MOUSE
-#define AIPTEK_TOOL_BUTTON_LENS_MODE			BTN_TOOL_LENS
-
-	/* Diagnostic message codes
-	 */
-#define AIPTEK_DIAGNOSTIC_NA				0
-#define AIPTEK_DIAGNOSTIC_SENDING_RELATIVE_IN_ABSOLUTE	1
-#define AIPTEK_DIAGNOSTIC_SENDING_ABSOLUTE_IN_RELATIVE	2
-#define AIPTEK_DIAGNOSTIC_TOOL_DISALLOWED		3
-
-	/* Time to wait (in ms) to help mask hand jittering
-	 * when pressing the stylus buttons.
-	 */
-#define AIPTEK_JITTER_DELAY_DEFAULT			50
-
-	/* Time to wait (in ms) in-between sending the tablet
-	 * a command and beginning the process of reading the return
-	 * sequence from the tablet.
-	 */
-#define AIPTEK_PROGRAMMABLE_DELAY_25		25
-#define AIPTEK_PROGRAMMABLE_DELAY_50		50
-#define AIPTEK_PROGRAMMABLE_DELAY_100		100
-#define AIPTEK_PROGRAMMABLE_DELAY_200		200
-#define AIPTEK_PROGRAMMABLE_DELAY_300		300
-#define AIPTEK_PROGRAMMABLE_DELAY_400		400
-#define AIPTEK_PROGRAMMABLE_DELAY_DEFAULT	AIPTEK_PROGRAMMABLE_DELAY_400
-
-	/* Mouse button programming
-	 */
-#define AIPTEK_MOUSE_LEFT_BUTTON		0x01
-#define AIPTEK_MOUSE_RIGHT_BUTTON		0x02
-#define AIPTEK_MOUSE_MIDDLE_BUTTON		0x04
-
-	/* Stylus button programming
-	 */
-#define AIPTEK_STYLUS_LOWER_BUTTON		0x08
-#define AIPTEK_STYLUS_UPPER_BUTTON		0x10
-
-	/* Length of incoming packet from the tablet
-	 */
-#define AIPTEK_PACKET_LENGTH			8
-
-	/* We report in EV_MISC both the proximity and
-	 * whether the report came from the stylus, tablet mouse
-	 * or "unknown" -- Unknown when the tablet is in relative
-	 * mode, because we only get report 1's.
-	 */
-#define AIPTEK_REPORT_TOOL_UNKNOWN		0x10
-#define AIPTEK_REPORT_TOOL_STYLUS		0x20
-#define AIPTEK_REPORT_TOOL_MOUSE		0x40
-
-static int programmableDelay = AIPTEK_PROGRAMMABLE_DELAY_DEFAULT;
-static int jitterDelay = AIPTEK_JITTER_DELAY_DEFAULT;
-
-struct aiptek_features {
-	int odmCode;		/* Tablet manufacturer code       */
-	int modelCode;		/* Tablet model code (not unique) */
-	int firmwareCode;	/* prom/eeprom version            */
-	char usbPath[64 + 1];	/* device's physical usb path     */
-	char inputPath[64 + 1];	/* input device path              */
-};
-
-struct aiptek_settings {
-	int pointerMode;	/* stylus-, mouse-only or either */
-	int coordinateMode;	/* absolute/relative coords      */
-	int toolMode;		/* pen, pencil, brush, etc. tool */
-	int xTilt;		/* synthetic xTilt amount        */
-	int yTilt;		/* synthetic yTilt amount        */
-	int wheel;		/* synthetic wheel amount        */
-	int stylusButtonUpper;	/* stylus upper btn delivers...  */
-	int stylusButtonLower;	/* stylus lower btn delivers...  */
-	int mouseButtonLeft;	/* mouse left btn delivers...    */
-	int mouseButtonMiddle;	/* mouse middle btn delivers...  */
-	int mouseButtonRight;	/* mouse right btn delivers...   */
-	int programmableDelay;	/* delay for tablet programming  */
-	int jitterDelay;	/* delay for hand jittering      */
-};
-
-struct aiptek {
-	struct input_dev *inputdev;		/* input device struct           */
-	struct usb_device *usbdev;		/* usb device struct             */
-	struct urb *urb;			/* urb for incoming reports      */
-	dma_addr_t data_dma;			/* our dma stuffage              */
-	struct aiptek_features features;	/* tablet's array of features    */
-	struct aiptek_settings curSetting;	/* tablet's current programmable */
-	struct aiptek_settings newSetting;	/* ... and new param settings    */
-	unsigned int ifnum;			/* interface number for IO       */
-	int diagnostic;				/* tablet diagnostic codes       */
-	unsigned long eventCount;		/* event count                   */
-	int inDelay;				/* jitter: in jitter delay?      */
-	unsigned long endDelay;			/* jitter: time when delay ends  */
-	int previousJitterable;			/* jitterable prev value     */
-	unsigned char *data;			/* incoming packet data          */
-};
-
-/*
- * Permit easy lookup of keyboard events to send, versus
- * the bitmap which comes from the tablet. This hides the
- * issue that the F_keys are not sequentially numbered.
- */
-static const int macroKeyEvents[] = {
-	KEY_ESC, KEY_F1, KEY_F2, KEY_F3, KEY_F4, KEY_F5,
-	KEY_F6, KEY_F7, KEY_F8, KEY_F9, KEY_F10, KEY_F11,
-	KEY_F12, KEY_F13, KEY_F14, KEY_F15, KEY_F16, KEY_F17,
-	KEY_F18, KEY_F19, KEY_F20, KEY_F21, KEY_F22, KEY_F23,
-	KEY_F24, KEY_STOP, KEY_AGAIN, KEY_PROPS, KEY_UNDO,
-	KEY_FRONT, KEY_COPY, KEY_OPEN, KEY_PASTE, 0
-};
-
-/***********************************************************************
- * Relative reports deliver values in 2's complement format to
- * deal with negative offsets.
- */
-static int aiptek_convert_from_2s_complement(unsigned char c)
-{
-	int ret;
-	unsigned char b = c;
-	int negate = 0;
-
-	if ((b & 0x80) != 0) {
-		b = ~b;
-		b--;
-		negate = 1;
-	}
-	ret = b;
-	ret = (negate == 1) ? -ret : ret;
-	return ret;
-}
-
-/***********************************************************************
- * aiptek_irq can receive one of six potential reports.
- * The documentation for each is in the body of the function.
- *
- * The tablet reports on several attributes per invocation of
- * aiptek_irq. Because the Linux Input Event system allows the
- * transmission of ONE attribute per input_report_xxx() call,
- * collation has to be done on the other end to reconstitute
- * a complete tablet report. Further, the number of Input Event reports
- * submitted varies, depending on what USB report type, and circumstance.
- * To deal with this, EV_MSC is used to indicate an 'end-of-report'
- * message. This has been an undocumented convention understood by the kernel
- * tablet driver and clients such as gpm and XFree86's tablet drivers.
- *
- * Of the information received from the tablet, the one piece I
- * cannot transmit is the proximity bit (without resorting to an EV_MSC
- * convention above.) I therefore have taken over REL_MISC and ABS_MISC
- * (for relative and absolute reports, respectively) for communicating
- * Proximity. Why two events? I thought it interesting to know if the
- * Proximity event occurred while the tablet was in absolute or relative
- * mode.
- *
- * Other tablets use the notion of a certain minimum stylus pressure
- * to infer proximity. While that could have been done, that is yet
- * another 'by convention' behavior, the documentation for which
- * would be spread between two (or more) pieces of software.
- *
- * EV_MSC usage was terminated for this purpose in Linux 2.5.x, and
- * replaced with the input_sync() method (which emits EV_SYN.)
- */
-
-static void aiptek_irq(struct urb *urb)
-{
-	struct aiptek *aiptek = urb->context;
-	unsigned char *data = aiptek->data;
-	struct input_dev *inputdev = aiptek->inputdev;
-	int jitterable = 0;
-	int retval, macro, x, y, z, left, right, middle, p, dv, tip, bs, pck;
-
-	switch (urb->status) {
-	case 0:
-		/* Success */
-		break;
-
-	case -ECONNRESET:
-	case -ENOENT:
-	case -ESHUTDOWN:
-		/* This urb is terminated, clean up */
-		dbg("%s - urb shutting down with status: %d",
-		    __FUNCTION__, urb->status);
-		return;
-
-	default:
-		dbg("%s - nonzero urb status received: %d",
-		    __FUNCTION__, urb->status);
-		goto exit;
-	}
-
-	/* See if we are in a delay loop -- throw out report if true.
-	 */
-	if (aiptek->inDelay == 1 && time_after(aiptek->endDelay, jiffies)) {
-		goto exit;
-	}
-
-	aiptek->inDelay = 0;
-	aiptek->eventCount++;
-
-	/* Report 1 delivers relative coordinates with either a stylus
-	 * or the mouse. You do not know, however, which input
-	 * tool generated the event.
-	 */
-	if (data[0] == 1) {
-		if (aiptek->curSetting.coordinateMode ==
-		    AIPTEK_COORDINATE_ABSOLUTE_MODE) {
-			aiptek->diagnostic =
-			    AIPTEK_DIAGNOSTIC_SENDING_RELATIVE_IN_ABSOLUTE;
-		} else {
-			x = aiptek_convert_from_2s_complement(data[2]);
-			y = aiptek_convert_from_2s_complement(data[3]);
-
-			/* jitterable keeps track of whether any button has been pressed.
-			 * We're also using it to remap the physical mouse button mask
-			 * to pseudo-settings. (We don't specifically care about it's
-			 * value after moving/transposing mouse button bitmasks, except
-			 * that a non-zero value indicates that one or more
-			 * mouse button was pressed.)
-			 */
-			jitterable = data[5] & 0x07;
-
-			left = (data[5] & aiptek->curSetting.mouseButtonLeft) != 0 ? 1 : 0;
-			right = (data[5] & aiptek->curSetting.mouseButtonRight) != 0 ? 1 : 0;
-			middle = (data[5] & aiptek->curSetting.mouseButtonMiddle) != 0 ? 1 : 0;
-
-			input_report_key(inputdev, BTN_LEFT, left);
-			input_report_key(inputdev, BTN_MIDDLE, middle);
-			input_report_key(inputdev, BTN_RIGHT, right);
-			input_report_rel(inputdev, REL_X, x);
-			input_report_rel(inputdev, REL_Y, y);
-			input_report_rel(inputdev, REL_MISC, 1 | AIPTEK_REPORT_TOOL_UNKNOWN);
-
-			/* Wheel support is in the form of a single-event
-			 * firing.
-			 */
-			if (aiptek->curSetting.wheel != AIPTEK_WHEEL_DISABLE) {
-				input_report_rel(inputdev, REL_WHEEL,
-						 aiptek->curSetting.wheel);
-				aiptek->curSetting.wheel = AIPTEK_WHEEL_DISABLE;
-			}
-			input_sync(inputdev);
-		}
-	}
-	/* Report 2 is delivered only by the stylus, and delivers
-	 * absolute coordinates.
-	 */
-	else if (data[0] == 2) {
-		if (aiptek->curSetting.coordinateMode == AIPTEK_COORDINATE_RELATIVE_MODE) {
-			aiptek->diagnostic = AIPTEK_DIAGNOSTIC_SENDING_ABSOLUTE_IN_RELATIVE;
-		} else if (!AIPTEK_POINTER_ALLOW_STYLUS_MODE
-			    (aiptek->curSetting.pointerMode)) {
-				aiptek->diagnostic = AIPTEK_DIAGNOSTIC_TOOL_DISALLOWED;
-		} else {
-			x = le16_to_cpu(get_unaligned((__le16 *) (data + 1)));
-			y = le16_to_cpu(get_unaligned((__le16 *) (data + 3)));
-			z = le16_to_cpu(get_unaligned((__le16 *) (data + 6)));
-
-			p = (data[5] & 0x01) != 0 ? 1 : 0;
-			dv = (data[5] & 0x02) != 0 ? 1 : 0;
-			tip = (data[5] & 0x04) != 0 ? 1 : 0;
-
-			/* Use jitterable to re-arrange button masks
-			 */
-			jitterable = data[5] & 0x18;
-
-			bs = (data[5] & aiptek->curSetting.stylusButtonLower) != 0 ? 1 : 0;
-			pck = (data[5] & aiptek->curSetting.stylusButtonUpper) != 0 ? 1 : 0;
-
-			/* dv indicates 'data valid' (e.g., the tablet is in sync
-			 * and has delivered a "correct" report) We will ignore
-			 * all 'bad' reports...
-			 */
-			if (dv != 0) {
-				/* If we've not already sent a tool_button_?? code, do
-				 * so now. Then set FIRED_BIT so it won't be resent unless
-				 * the user forces FIRED_BIT off.
-				 */
-				if (TOOL_BUTTON_FIRED
-				    (aiptek->curSetting.toolMode) == 0) {
-					input_report_key(inputdev,
-							 TOOL_BUTTON(aiptek->curSetting.toolMode),
-							 1);
-					aiptek->curSetting.toolMode |= TOOL_BUTTON_FIRED_BIT;
-				}
-
-				if (p != 0) {
-					input_report_abs(inputdev, ABS_X, x);
-					input_report_abs(inputdev, ABS_Y, y);
-					input_report_abs(inputdev, ABS_PRESSURE, z);
-
-					input_report_key(inputdev, BTN_TOUCH, tip);
-					input_report_key(inputdev, BTN_STYLUS, bs);
-					input_report_key(inputdev, BTN_STYLUS2, pck);
-
-					if (aiptek->curSetting.xTilt !=
-					    AIPTEK_TILT_DISABLE) {
-						input_report_abs(inputdev,
-								 ABS_TILT_X,
-								 aiptek->curSetting.xTilt);
-					}
-					if (aiptek->curSetting.yTilt != AIPTEK_TILT_DISABLE) {
-						input_report_abs(inputdev,
-								 ABS_TILT_Y,
-								 aiptek->curSetting.yTilt);
-					}
-
-					/* Wheel support is in the form of a single-event
-					 * firing.
-					 */
-					if (aiptek->curSetting.wheel !=
-					    AIPTEK_WHEEL_DISABLE) {
-						input_report_abs(inputdev,
-								 ABS_WHEEL,
-								 aiptek->curSetting.wheel);
-						aiptek->curSetting.wheel = AIPTEK_WHEEL_DISABLE;
-					}
-				}
-				input_report_abs(inputdev, ABS_MISC, p | AIPTEK_REPORT_TOOL_STYLUS);
-				input_sync(inputdev);
-			}
-		}
-	}
-	/* Report 3's come from the mouse in absolute mode.
-	 */
-	else if (data[0] == 3) {
-		if (aiptek->curSetting.coordinateMode == AIPTEK_COORDINATE_RELATIVE_MODE) {
-			aiptek->diagnostic = AIPTEK_DIAGNOSTIC_SENDING_ABSOLUTE_IN_RELATIVE;
-		} else if (!AIPTEK_POINTER_ALLOW_MOUSE_MODE
-			(aiptek->curSetting.pointerMode)) {
-			aiptek->diagnostic = AIPTEK_DIAGNOSTIC_TOOL_DISALLOWED;
-		} else {
-			x = le16_to_cpu(get_unaligned((__le16 *) (data + 1)));
-			y = le16_to_cpu(get_unaligned((__le16 *) (data + 3)));
-
-			jitterable = data[5] & 0x1c;
-
-			p = (data[5] & 0x01) != 0 ? 1 : 0;
-			dv = (data[5] & 0x02) != 0 ? 1 : 0;
-			left = (data[5] & aiptek->curSetting.mouseButtonLeft) != 0 ? 1 : 0;
-			right = (data[5] & aiptek->curSetting.mouseButtonRight) != 0 ? 1 : 0;
-			middle = (data[5] & aiptek->curSetting.mouseButtonMiddle) != 0 ? 1 : 0;
-
-			if (dv != 0) {
-				/* If we've not already sent a tool_button_?? code, do
-				 * so now. Then set FIRED_BIT so it won't be resent unless
-				 * the user forces FIRED_BIT off.
-				 */
-				if (TOOL_BUTTON_FIRED
-				    (aiptek->curSetting.toolMode) == 0) {
-					input_report_key(inputdev,
-							 TOOL_BUTTON(aiptek->curSetting.toolMode),
-							 1);
-					aiptek->curSetting.toolMode |= TOOL_BUTTON_FIRED_BIT;
-				}
-
-				if (p != 0) {
-					input_report_abs(inputdev, ABS_X, x);
-					input_report_abs(inputdev, ABS_Y, y);
-
-					input_report_key(inputdev, BTN_LEFT, left);
-					input_report_key(inputdev, BTN_MIDDLE, middle);
-					input_report_key(inputdev, BTN_RIGHT, right);
-
-					/* Wheel support is in the form of a single-event
-					 * firing.
-					 */
-					if (aiptek->curSetting.wheel != AIPTEK_WHEEL_DISABLE) {
-						input_report_abs(inputdev,
-								 ABS_WHEEL,
-								 aiptek->curSetting.wheel);
-						aiptek->curSetting.wheel = AIPTEK_WHEEL_DISABLE;
-					}
-				}
-				input_report_rel(inputdev, REL_MISC, p | AIPTEK_REPORT_TOOL_MOUSE);
-				input_sync(inputdev);
-			}
-		}
-	}
-	/* Report 4s come from the macro keys when pressed by stylus
-	 */
-	else if (data[0] == 4) {
-		jitterable = data[1] & 0x18;
-
-		p = (data[1] & 0x01) != 0 ? 1 : 0;
-		dv = (data[1] & 0x02) != 0 ? 1 : 0;
-		tip = (data[1] & 0x04) != 0 ? 1 : 0;
-		bs = (data[1] & aiptek->curSetting.stylusButtonLower) != 0 ? 1 : 0;
-		pck = (data[1] & aiptek->curSetting.stylusButtonUpper) != 0 ? 1 : 0;
-
-		macro = data[3];
-		z = le16_to_cpu(get_unaligned((__le16 *) (data + 4)));
-
-		if (dv != 0) {
-			/* If we've not already sent a tool_button_?? code, do
-			 * so now. Then set FIRED_BIT so it won't be resent unless
-			 * the user forces FIRED_BIT off.
-			 */
-			if (TOOL_BUTTON_FIRED(aiptek->curSetting.toolMode) == 0) {
-				input_report_key(inputdev,
-						 TOOL_BUTTON(aiptek->curSetting.toolMode),
-						 1);
-				aiptek->curSetting.toolMode |= TOOL_BUTTON_FIRED_BIT;
-			}
-
-			if (p != 0) {
-				input_report_key(inputdev, BTN_TOUCH, tip);
-				input_report_key(inputdev, BTN_STYLUS, bs);
-				input_report_key(inputdev, BTN_STYLUS2, pck);
-				input_report_abs(inputdev, ABS_PRESSURE, z);
-			}
-
-			/* For safety, we're sending key 'break' codes for the
-			 * neighboring macro keys.
-			 */
-			if (macro > 0) {
-				input_report_key(inputdev,
-						 macroKeyEvents[macro - 1], 0);
-			}
-			if (macro < 25) {
-				input_report_key(inputdev,
-						 macroKeyEvents[macro + 1], 0);
-			}
-			input_report_key(inputdev, macroKeyEvents[macro], p);
-			input_report_abs(inputdev, ABS_MISC,
-					 p | AIPTEK_REPORT_TOOL_STYLUS);
-			input_sync(inputdev);
-		}
-	}
-	/* Report 5s come from the macro keys when pressed by mouse
-	 */
-	else if (data[0] == 5) {
-		jitterable = data[1] & 0x1c;
-
-		p = (data[1] & 0x01) != 0 ? 1 : 0;
-		dv = (data[1] & 0x02) != 0 ? 1 : 0;
-		left = (data[1]& aiptek->curSetting.mouseButtonLeft) != 0 ? 1 : 0;
-		right = (data[1] & aiptek->curSetting.mouseButtonRight) != 0 ? 1 : 0;
-		middle = (data[1] & aiptek->curSetting.mouseButtonMiddle) != 0 ? 1 : 0;
-		macro = data[3];
-
-		if (dv != 0) {
-			/* If we've not already sent a tool_button_?? code, do
-			 * so now. Then set FIRED_BIT so it won't be resent unless
-			 * the user forces FIRED_BIT off.
-			 */
-			if (TOOL_BUTTON_FIRED(aiptek->curSetting.toolMode) == 0) {
-				input_report_key(inputdev,
-						 TOOL_BUTTON(aiptek->curSetting.toolMode),
-						 1);
-				aiptek->curSetting.toolMode |= TOOL_BUTTON_FIRED_BIT;
-			}
-
-			if (p != 0) {
-				input_report_key(inputdev, BTN_LEFT, left);
-				input_report_key(inputdev, BTN_MIDDLE, middle);
-				input_report_key(inputdev, BTN_RIGHT, right);
-			}
-
-			/* For safety, we're sending key 'break' codes for the
-			 * neighboring macro keys.
-			 */
-			if (macro > 0) {
-				input_report_key(inputdev,
-						 macroKeyEvents[macro - 1], 0);
-			}
-			if (macro < 25) {
-				input_report_key(inputdev,
-						 macroKeyEvents[macro + 1], 0);
-			}
-
-			input_report_key(inputdev, macroKeyEvents[macro], 1);
-			input_report_rel(inputdev, ABS_MISC,
-					 p | AIPTEK_REPORT_TOOL_MOUSE);
-			input_sync(inputdev);
-		}
-	}
-	/* We have no idea which tool can generate a report 6. Theoretically,
-	 * neither need to, having been given reports 4 & 5 for such use.
-	 * However, report 6 is the 'official-looking' report for macroKeys;
-	 * reports 4 & 5 supposively are used to support unnamed, unknown
-	 * hat switches (which just so happen to be the macroKeys.)
-	 */
-	else if (data[0] == 6) {
-		macro = le16_to_cpu(get_unaligned((__le16 *) (data + 1)));
-		if (macro > 0) {
-			input_report_key(inputdev, macroKeyEvents[macro - 1],
-					 0);
-		}
-		if (macro < 25) {
-			input_report_key(inputdev, macroKeyEvents[macro + 1],
-					 0);
-		}
-
-		/* If we've not already sent a tool_button_?? code, do
-		 * so now. Then set FIRED_BIT so it won't be resent unless
-		 * the user forces FIRED_BIT off.
-		 */
-		if (TOOL_BUTTON_FIRED(aiptek->curSetting.toolMode) == 0) {
-			input_report_key(inputdev,
-					 TOOL_BUTTON(aiptek->curSetting.
-						     toolMode), 1);
-			aiptek->curSetting.toolMode |= TOOL_BUTTON_FIRED_BIT;
-		}
-
-		input_report_key(inputdev, macroKeyEvents[macro], 1);
-		input_report_abs(inputdev, ABS_MISC,
-				 1 | AIPTEK_REPORT_TOOL_UNKNOWN);
-		input_sync(inputdev);
-	} else {
-		dbg("Unknown report %d", data[0]);
-	}
-
-	/* Jitter may occur when the user presses a button on the stlyus
-	 * or the mouse. What we do to prevent that is wait 'x' milliseconds
-	 * following a 'jitterable' event, which should give the hand some time
-	 * stabilize itself.
-	 *
-	 * We just introduced aiptek->previousJitterable to carry forth the
-	 * notion that jitter occurs when the button state changes from on to off:
-	 * a person drawing, holding a button down is not subject to jittering.
-	 * With that in mind, changing from upper button depressed to lower button
-	 * WILL transition through a jitter delay.
-	 */
-
-	if (aiptek->previousJitterable != jitterable &&
-	    aiptek->curSetting.jitterDelay != 0 && aiptek->inDelay != 1) {
-		aiptek->endDelay = jiffies +
-		    ((aiptek->curSetting.jitterDelay * HZ) / 1000);
-		aiptek->inDelay = 1;
-	}
-	aiptek->previousJitterable = jitterable;
-
-exit:
-	retval = usb_submit_urb(urb, GFP_ATOMIC);
-	if (retval != 0) {
-		err("%s - usb_submit_urb failed with result %d",
-		    __FUNCTION__, retval);
-	}
-}
-
-/***********************************************************************
- * These are the USB id's known so far. We do not identify them to
- * specific Aiptek model numbers, because there has been overlaps,
- * use, and reuse of id's in existing models. Certain models have
- * been known to use more than one ID, indicative perhaps of
- * manufacturing revisions. In any event, we consider these
- * IDs to not be model-specific nor unique.
- */
-static const struct usb_device_id aiptek_ids[] = {
-	{USB_DEVICE(USB_VENDOR_ID_AIPTEK, 0x01)},
-	{USB_DEVICE(USB_VENDOR_ID_AIPTEK, 0x10)},
-	{USB_DEVICE(USB_VENDOR_ID_AIPTEK, 0x20)},
-	{USB_DEVICE(USB_VENDOR_ID_AIPTEK, 0x21)},
-	{USB_DEVICE(USB_VENDOR_ID_AIPTEK, 0x22)},
-	{USB_DEVICE(USB_VENDOR_ID_AIPTEK, 0x23)},
-	{USB_DEVICE(USB_VENDOR_ID_AIPTEK, 0x24)},
-	{}
-};
-
-MODULE_DEVICE_TABLE(usb, aiptek_ids);
-
-/***********************************************************************
- * Open an instance of the tablet driver.
- */
-static int aiptek_open(struct input_dev *inputdev)
-{
-	struct aiptek *aiptek = input_get_drvdata(inputdev);
-
-	aiptek->urb->dev = aiptek->usbdev;
-	if (usb_submit_urb(aiptek->urb, GFP_KERNEL) != 0)
-		return -EIO;
-
-	return 0;
-}
-
-/***********************************************************************
- * Close an instance of the tablet driver.
- */
-static void aiptek_close(struct input_dev *inputdev)
-{
-	struct aiptek *aiptek = input_get_drvdata(inputdev);
-
-	usb_kill_urb(aiptek->urb);
-}
-
-/***********************************************************************
- * aiptek_set_report and aiptek_get_report() are borrowed from Linux 2.4.x,
- * where they were known as usb_set_report and usb_get_report.
- */
-static int
-aiptek_set_report(struct aiptek *aiptek,
-		  unsigned char report_type,
-		  unsigned char report_id, void *buffer, int size)
-{
-	return usb_control_msg(aiptek->usbdev,
-			       usb_sndctrlpipe(aiptek->usbdev, 0),
-			       USB_REQ_SET_REPORT,
-			       USB_TYPE_CLASS | USB_RECIP_INTERFACE |
-			       USB_DIR_OUT, (report_type << 8) + report_id,
-			       aiptek->ifnum, buffer, size, 5000);
-}
-
-static int
-aiptek_get_report(struct aiptek *aiptek,
-		  unsigned char report_type,
-		  unsigned char report_id, void *buffer, int size)
-{
-	return usb_control_msg(aiptek->usbdev,
-			       usb_rcvctrlpipe(aiptek->usbdev, 0),
-			       USB_REQ_GET_REPORT,
-			       USB_TYPE_CLASS | USB_RECIP_INTERFACE |
-			       USB_DIR_IN, (report_type << 8) + report_id,
-			       aiptek->ifnum, buffer, size, 5000);
-}
-
-/***********************************************************************
- * Send a command to the tablet.
- */
-static int
-aiptek_command(struct aiptek *aiptek, unsigned char command, unsigned char data)
-{
-	const int sizeof_buf = 3 * sizeof(u8);
-	int ret;
-	u8 *buf;
-
-	buf = kmalloc(sizeof_buf, GFP_KERNEL);
-	if (!buf)
-		return -ENOMEM;
-
-	buf[0] = 2;
-	buf[1] = command;
-	buf[2] = data;
-
-	if ((ret =
-	     aiptek_set_report(aiptek, 3, 2, buf, sizeof_buf)) != sizeof_buf) {
-		dbg("aiptek_program: failed, tried to send: 0x%02x 0x%02x",
-		    command, data);
-	}
-	kfree(buf);
-	return ret < 0 ? ret : 0;
-}
-
-/***********************************************************************
- * Retrieve information from the tablet. Querying info is defined as first
- * sending the {command,data} sequence as a command, followed by a wait
- * (aka, "programmaticDelay") and then a "read" request.
- */
-static int
-aiptek_query(struct aiptek *aiptek, unsigned char command, unsigned char data)
-{
-	const int sizeof_buf = 3 * sizeof(u8);
-	int ret;
-	u8 *buf;
-
-	buf = kmalloc(sizeof_buf, GFP_KERNEL);
-	if (!buf)
-		return -ENOMEM;
-
-	buf[0] = 2;
-	buf[1] = command;
-	buf[2] = data;
-
-	if (aiptek_command(aiptek, command, data) != 0) {
-		kfree(buf);
-		return -EIO;
-	}
-	msleep(aiptek->curSetting.programmableDelay);
-
-	if ((ret =
-	     aiptek_get_report(aiptek, 3, 2, buf, sizeof_buf)) != sizeof_buf) {
-		dbg("aiptek_query failed: returned 0x%02x 0x%02x 0x%02x",
-		    buf[0], buf[1], buf[2]);
-		ret = -EIO;
-	} else {
-		ret = le16_to_cpu(get_unaligned((__le16 *) (buf + 1)));
-	}
-	kfree(buf);
-	return ret;
-}
-
-/***********************************************************************
- * Program the tablet into either absolute or relative mode.
- * We also get information about the tablet's size.
- */
-static int aiptek_program_tablet(struct aiptek *aiptek)
-{
-	int ret;
-	/* Execute Resolution500LPI */
-	if ((ret = aiptek_command(aiptek, 0x18, 0x04)) < 0)
-		return ret;
-
-	/* Query getModelCode */
-	if ((ret = aiptek_query(aiptek, 0x02, 0x00)) < 0)
-		return ret;
-	aiptek->features.modelCode = ret & 0xff;
-
-	/* Query getODMCode */
-	if ((ret = aiptek_query(aiptek, 0x03, 0x00)) < 0)
-		return ret;
-	aiptek->features.odmCode = ret;
-
-	/* Query getFirmwareCode */
-	if ((ret = aiptek_query(aiptek, 0x04, 0x00)) < 0)
-		return ret;
-	aiptek->features.firmwareCode = ret;
-
-	/* Query getXextension */
-	if ((ret = aiptek_query(aiptek, 0x01, 0x00)) < 0)
-		return ret;
-	aiptek->inputdev->absmin[ABS_X] = 0;
-	aiptek->inputdev->absmax[ABS_X] = ret - 1;
-
-	/* Query getYextension */
-	if ((ret = aiptek_query(aiptek, 0x01, 0x01)) < 0)
-		return ret;
-	aiptek->inputdev->absmin[ABS_Y] = 0;
-	aiptek->inputdev->absmax[ABS_Y] = ret - 1;
-
-	/* Query getPressureLevels */
-	if ((ret = aiptek_query(aiptek, 0x08, 0x00)) < 0)
-		return ret;
-	aiptek->inputdev->absmin[ABS_PRESSURE] = 0;
-	aiptek->inputdev->absmax[ABS_PRESSURE] = ret - 1;
-
-	/* Depending on whether we are in absolute or relative mode, we will
-	 * do a switchToTablet(absolute) or switchToMouse(relative) command.
-	 */
-	if (aiptek->curSetting.coordinateMode ==
-	    AIPTEK_COORDINATE_ABSOLUTE_MODE) {
-		/* Execute switchToTablet */
-		if ((ret = aiptek_command(aiptek, 0x10, 0x01)) < 0) {
-			return ret;
-		}
-	} else {
-		/* Execute switchToMouse */
-		if ((ret = aiptek_command(aiptek, 0x10, 0x00)) < 0) {
-			return ret;
-		}
-	}
-
-	/* Enable the macro keys */
-	if ((ret = aiptek_command(aiptek, 0x11, 0x02)) < 0)
-		return ret;
-#if 0
-	/* Execute FilterOn */
-	if ((ret = aiptek_command(aiptek, 0x17, 0x00)) < 0)
-		return ret;
-#endif
-
-	/* Execute AutoGainOn */
-	if ((ret = aiptek_command(aiptek, 0x12, 0xff)) < 0)
-		return ret;
-
-	/* Reset the eventCount, so we track events from last (re)programming
-	 */
-	aiptek->diagnostic = AIPTEK_DIAGNOSTIC_NA;
-	aiptek->eventCount = 0;
-
-	return 0;
-}
-
-/***********************************************************************
- * Sysfs functions. Sysfs prefers that individually-tunable parameters
- * exist in their separate pseudo-files. Summary data that is immutable
- * may exist in a singular file so long as you don't define a writeable
- * interface.
- */
-
-/***********************************************************************
- * support the 'size' file -- display support
- */
-static ssize_t show_tabletSize(struct device *dev, struct device_attribute *attr, char *buf)
-{
-	struct aiptek *aiptek = dev_get_drvdata(dev);
-
-	if (aiptek == NULL)
-		return 0;
-
-	return snprintf(buf, PAGE_SIZE, "%dx%d\n",
-			aiptek->inputdev->absmax[ABS_X] + 1,
-			aiptek->inputdev->absmax[ABS_Y] + 1);
-}
-
-/* These structs define the sysfs files, param #1 is the name of the
- * file, param 2 is the file permissions, param 3 & 4 are to the
- * output generator and input parser routines. Absence of a routine is
- * permitted -- it only means can't either 'cat' the file, or send data
- * to it.
- */
-static DEVICE_ATTR(size, S_IRUGO, show_tabletSize, NULL);
-
-/***********************************************************************
- * support routines for the 'product_id' file
- */
-static ssize_t show_tabletProductId(struct device *dev, struct device_attribute *attr, char *buf)
-{
-	struct aiptek *aiptek = dev_get_drvdata(dev);
-
-	if (aiptek == NULL)
-		return 0;
-
-	return snprintf(buf, PAGE_SIZE, "0x%04x\n",
-			aiptek->inputdev->id.product);
-}
-
-static DEVICE_ATTR(product_id, S_IRUGO, show_tabletProductId, NULL);
-
-/***********************************************************************
- * support routines for the 'vendor_id' file
- */
-static ssize_t show_tabletVendorId(struct device *dev, struct device_attribute *attr, char *buf)
-{
-	struct aiptek *aiptek = dev_get_drvdata(dev);
-
-	if (aiptek == NULL)
-		return 0;
-
-	return snprintf(buf, PAGE_SIZE, "0x%04x\n", aiptek->inputdev->id.vendor);
-}
-
-static DEVICE_ATTR(vendor_id, S_IRUGO, show_tabletVendorId, NULL);
-
-/***********************************************************************
- * support routines for the 'vendor' file
- */
-static ssize_t show_tabletManufacturer(struct device *dev, struct device_attribute *attr, char *buf)
-{
-	struct aiptek *aiptek = dev_get_drvdata(dev);
-	int retval;
-
-	if (aiptek == NULL)
-		return 0;
-
-	retval = snprintf(buf, PAGE_SIZE, "%s\n", aiptek->usbdev->manufacturer);
-	return retval;
-}
-
-static DEVICE_ATTR(vendor, S_IRUGO, show_tabletManufacturer, NULL);
-
-/***********************************************************************
- * support routines for the 'product' file
- */
-static ssize_t show_tabletProduct(struct device *dev, struct device_attribute *attr, char *buf)
-{
-	struct aiptek *aiptek = dev_get_drvdata(dev);
-	int retval;
-
-	if (aiptek == NULL)
-		return 0;
-
-	retval = snprintf(buf, PAGE_SIZE, "%s\n", aiptek->usbdev->product);
-	return retval;
-}
-
-static DEVICE_ATTR(product, S_IRUGO, show_tabletProduct, NULL);
-
-/***********************************************************************
- * support routines for the 'pointer_mode' file. Note that this file
- * both displays current setting and allows reprogramming.
- */
-static ssize_t show_tabletPointerMode(struct device *dev, struct device_attribute *attr, char *buf)
-{
-	struct aiptek *aiptek = dev_get_drvdata(dev);
-	char *s;
-
-	if (aiptek == NULL)
-		return 0;
-
-	switch (aiptek->curSetting.pointerMode) {
-	case AIPTEK_POINTER_ONLY_STYLUS_MODE:
-		s = "stylus";
-		break;
-
-	case AIPTEK_POINTER_ONLY_MOUSE_MODE:
-		s = "mouse";
-		break;
-
-	case AIPTEK_POINTER_EITHER_MODE:
-		s = "either";
-		break;
-
-	default:
-		s = "unknown";
-		break;
-	}
-	return snprintf(buf, PAGE_SIZE, "%s\n", s);
-}
-
-static ssize_t
-store_tabletPointerMode(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
-{
-	struct aiptek *aiptek = dev_get_drvdata(dev);
-	if (aiptek == NULL)
-		return 0;
-
-	if (strcmp(buf, "stylus") == 0) {
-		aiptek->newSetting.pointerMode =
-		    AIPTEK_POINTER_ONLY_STYLUS_MODE;
-	} else if (strcmp(buf, "mouse") == 0) {
-		aiptek->newSetting.pointerMode = AIPTEK_POINTER_ONLY_MOUSE_MODE;
-	} else if (strcmp(buf, "either") == 0) {
-		aiptek->newSetting.pointerMode = AIPTEK_POINTER_EITHER_MODE;
-	}
-	return count;
-}
-
-static DEVICE_ATTR(pointer_mode,
-		   S_IRUGO | S_IWUGO,
-		   show_tabletPointerMode, store_tabletPointerMode);
-
-/***********************************************************************
- * support routines for the 'coordinate_mode' file. Note that this file
- * both displays current setting and allows reprogramming.
- */
-static ssize_t show_tabletCoordinateMode(struct device *dev, struct device_attribute *attr, char *buf)
-{
-	struct aiptek *aiptek = dev_get_drvdata(dev);
-	char *s;
-
-	if (aiptek == NULL)
-		return 0;
-
-	switch (aiptek->curSetting.coordinateMode) {
-	case AIPTEK_COORDINATE_ABSOLUTE_MODE:
-		s = "absolute";
-		break;
-
-	case AIPTEK_COORDINATE_RELATIVE_MODE:
-		s = "relative";
-		break;
-
-	default:
-		s = "unknown";
-		break;
-	}
-	return snprintf(buf, PAGE_SIZE, "%s\n", s);
-}
-
-static ssize_t
-store_tabletCoordinateMode(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
-{
-	struct aiptek *aiptek = dev_get_drvdata(dev);
-	if (aiptek == NULL)
-		return 0;
-
-	if (strcmp(buf, "absolute") == 0) {
-		aiptek->newSetting.pointerMode =
-		    AIPTEK_COORDINATE_ABSOLUTE_MODE;
-	} else if (strcmp(buf, "relative") == 0) {
-		aiptek->newSetting.pointerMode =
-		    AIPTEK_COORDINATE_RELATIVE_MODE;
-	}
-	return count;
-}
-
-static DEVICE_ATTR(coordinate_mode,
-		   S_IRUGO | S_IWUGO,
-		   show_tabletCoordinateMode, store_tabletCoordinateMode);
-
-/***********************************************************************
- * support routines for the 'tool_mode' file. Note that this file
- * both displays current setting and allows reprogramming.
- */
-static ssize_t show_tabletToolMode(struct device *dev, struct device_attribute *attr, char *buf)
-{
-	struct aiptek *aiptek = dev_get_drvdata(dev);
-	char *s;
-
-	if (aiptek == NULL)
-		return 0;
-
-	switch (TOOL_BUTTON(aiptek->curSetting.toolMode)) {
-	case AIPTEK_TOOL_BUTTON_MOUSE_MODE:
-		s = "mouse";
-		break;
-
-	case AIPTEK_TOOL_BUTTON_ERASER_MODE:
-		s = "eraser";
-		break;
-
-	case AIPTEK_TOOL_BUTTON_PENCIL_MODE:
-		s = "pencil";
-		break;
-
-	case AIPTEK_TOOL_BUTTON_PEN_MODE:
-		s = "pen";
-		break;
-
-	case AIPTEK_TOOL_BUTTON_BRUSH_MODE:
-		s = "brush";
-		break;
-
-	case AIPTEK_TOOL_BUTTON_AIRBRUSH_MODE:
-		s = "airbrush";
-		break;
-
-	case AIPTEK_TOOL_BUTTON_LENS_MODE:
-		s = "lens";
-		break;
-
-	default:
-		s = "unknown";
-		break;
-	}
-	return snprintf(buf, PAGE_SIZE, "%s\n", s);
-}
-
-static ssize_t
-store_tabletToolMode(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
-{
-	struct aiptek *aiptek = dev_get_drvdata(dev);
-	if (aiptek == NULL)
-		return 0;
-
-	if (strcmp(buf, "mouse") == 0) {
-		aiptek->newSetting.toolMode = AIPTEK_TOOL_BUTTON_MOUSE_MODE;
-	} else if (strcmp(buf, "eraser") == 0) {
-		aiptek->newSetting.toolMode = AIPTEK_TOOL_BUTTON_ERASER_MODE;
-	} else if (strcmp(buf, "pencil") == 0) {
-		aiptek->newSetting.toolMode = AIPTEK_TOOL_BUTTON_PENCIL_MODE;
-	} else if (strcmp(buf, "pen") == 0) {
-		aiptek->newSetting.toolMode = AIPTEK_TOOL_BUTTON_PEN_MODE;
-	} else if (strcmp(buf, "brush") == 0) {
-		aiptek->newSetting.toolMode = AIPTEK_TOOL_BUTTON_BRUSH_MODE;
-	} else if (strcmp(buf, "airbrush") == 0) {
-		aiptek->newSetting.toolMode = AIPTEK_TOOL_BUTTON_AIRBRUSH_MODE;
-	} else if (strcmp(buf, "lens") == 0) {
-		aiptek->newSetting.toolMode = AIPTEK_TOOL_BUTTON_LENS_MODE;
-	}
-
-	return count;
-}
-
-static DEVICE_ATTR(tool_mode,
-		   S_IRUGO | S_IWUGO,
-		   show_tabletToolMode, store_tabletToolMode);
-
-/***********************************************************************
- * support routines for the 'xtilt' file. Note that this file
- * both displays current setting and allows reprogramming.
- */
-static ssize_t show_tabletXtilt(struct device *dev, struct device_attribute *attr, char *buf)
-{
-	struct aiptek *aiptek = dev_get_drvdata(dev);
-
-	if (aiptek == NULL)
-		return 0;
-
-	if (aiptek->curSetting.xTilt == AIPTEK_TILT_DISABLE) {
-		return snprintf(buf, PAGE_SIZE, "disable\n");
-	} else {
-		return snprintf(buf, PAGE_SIZE, "%d\n",
-				aiptek->curSetting.xTilt);
-	}
-}
-
-static ssize_t
-store_tabletXtilt(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
-{
-	struct aiptek *aiptek = dev_get_drvdata(dev);
-	int x;
-
-	if (aiptek == NULL)
-		return 0;
-
-	if (strcmp(buf, "disable") == 0) {
-		aiptek->newSetting.xTilt = AIPTEK_TILT_DISABLE;
-	} else {
-		x = (int)simple_strtol(buf, NULL, 10);
-		if (x >= AIPTEK_TILT_MIN && x <= AIPTEK_TILT_MAX) {
-			aiptek->newSetting.xTilt = x;
-		}
-	}
-	return count;
-}
-
-static DEVICE_ATTR(xtilt,
-		   S_IRUGO | S_IWUGO, show_tabletXtilt, store_tabletXtilt);
-
-/***********************************************************************
- * support routines for the 'ytilt' file. Note that this file
- * both displays current setting and allows reprogramming.
- */
-static ssize_t show_tabletYtilt(struct device *dev, struct device_attribute *attr, char *buf)
-{
-	struct aiptek *aiptek = dev_get_drvdata(dev);
-
-	if (aiptek == NULL)
-		return 0;
-
-	if (aiptek->curSetting.yTilt == AIPTEK_TILT_DISABLE) {
-		return snprintf(buf, PAGE_SIZE, "disable\n");
-	} else {
-		return snprintf(buf, PAGE_SIZE, "%d\n",
-				aiptek->curSetting.yTilt);
-	}
-}
-
-static ssize_t
-store_tabletYtilt(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
-{
-	struct aiptek *aiptek = dev_get_drvdata(dev);
-	int y;
-
-	if (aiptek == NULL)
-		return 0;
-
-	if (strcmp(buf, "disable") == 0) {
-		aiptek->newSetting.yTilt = AIPTEK_TILT_DISABLE;
-	} else {
-		y = (int)simple_strtol(buf, NULL, 10);
-		if (y >= AIPTEK_TILT_MIN && y <= AIPTEK_TILT_MAX) {
-			aiptek->newSetting.yTilt = y;
-		}
-	}
-	return count;
-}
-
-static DEVICE_ATTR(ytilt,
-		   S_IRUGO | S_IWUGO, show_tabletYtilt, store_tabletYtilt);
-
-/***********************************************************************
- * support routines for the 'jitter' file. Note that this file
- * both displays current setting and allows reprogramming.
- */
-static ssize_t show_tabletJitterDelay(struct device *dev, struct device_attribute *attr, char *buf)
-{
-	struct aiptek *aiptek = dev_get_drvdata(dev);
-
-	if (aiptek == NULL)
-		return 0;
-
-	return snprintf(buf, PAGE_SIZE, "%d\n", aiptek->curSetting.jitterDelay);
-}
-
-static ssize_t
-store_tabletJitterDelay(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
-{
-	struct aiptek *aiptek = dev_get_drvdata(dev);
-
-	if (aiptek == NULL)
-		return 0;
-
-	aiptek->newSetting.jitterDelay = (int)simple_strtol(buf, NULL, 10);
-	return count;
-}
-
-static DEVICE_ATTR(jitter,
-		   S_IRUGO | S_IWUGO,
-		   show_tabletJitterDelay, store_tabletJitterDelay);
-
-/***********************************************************************
- * support routines for the 'delay' file. Note that this file
- * both displays current setting and allows reprogramming.
- */
-static ssize_t show_tabletProgrammableDelay(struct device *dev, struct device_attribute *attr, char *buf)
-{
-	struct aiptek *aiptek = dev_get_drvdata(dev);
-
-	if (aiptek == NULL)
-		return 0;
-
-	return snprintf(buf, PAGE_SIZE, "%d\n",
-			aiptek->curSetting.programmableDelay);
-}
-
-static ssize_t
-store_tabletProgrammableDelay(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
-{
-	struct aiptek *aiptek = dev_get_drvdata(dev);
-
-	if (aiptek == NULL)
-		return 0;
-
-	aiptek->newSetting.programmableDelay = (int)simple_strtol(buf, NULL, 10);
-	return count;
-}
-
-static DEVICE_ATTR(delay,
-		   S_IRUGO | S_IWUGO,
-		   show_tabletProgrammableDelay, store_tabletProgrammableDelay);
-
-/***********************************************************************
- * support routines for the 'input_path' file. Note that this file
- * only displays current setting.
- */
-static ssize_t show_tabletInputDevice(struct device *dev, struct device_attribute *attr, char *buf)
-{
-	struct aiptek *aiptek = dev_get_drvdata(dev);
-
-	if (aiptek == NULL)
-		return 0;
-
-	return snprintf(buf, PAGE_SIZE, "/dev/input/%s\n",
-			aiptek->features.inputPath);
-}
-
-static DEVICE_ATTR(input_path, S_IRUGO, show_tabletInputDevice, NULL);
-
-/***********************************************************************
- * support routines for the 'event_count' file. Note that this file
- * only displays current setting.
- */
-static ssize_t show_tabletEventsReceived(struct device *dev, struct device_attribute *attr, char *buf)
-{
-	struct aiptek *aiptek = dev_get_drvdata(dev);
-
-	if (aiptek == NULL)
-		return 0;
-
-	return snprintf(buf, PAGE_SIZE, "%ld\n", aiptek->eventCount);
-}
-
-static DEVICE_ATTR(event_count, S_IRUGO, show_tabletEventsReceived, NULL);
-
-/***********************************************************************
- * support routines for the 'diagnostic' file. Note that this file
- * only displays current setting.
- */
-static ssize_t show_tabletDiagnosticMessage(struct device *dev, struct device_attribute *attr, char *buf)
-{
-	struct aiptek *aiptek = dev_get_drvdata(dev);
-	char *retMsg;
-
-	if (aiptek == NULL)
-		return 0;
-
-	switch (aiptek->diagnostic) {
-	case AIPTEK_DIAGNOSTIC_NA:
-		retMsg = "no errors\n";
-		break;
-
-	case AIPTEK_DIAGNOSTIC_SENDING_RELATIVE_IN_ABSOLUTE:
-		retMsg = "Error: receiving relative reports\n";
-		break;
-
-	case AIPTEK_DIAGNOSTIC_SENDING_ABSOLUTE_IN_RELATIVE:
-		retMsg = "Error: receiving absolute reports\n";
-		break;
-
-	case AIPTEK_DIAGNOSTIC_TOOL_DISALLOWED:
-		if (aiptek->curSetting.pointerMode ==
-		    AIPTEK_POINTER_ONLY_MOUSE_MODE) {
-			retMsg = "Error: receiving stylus reports\n";
-		} else {
-			retMsg = "Error: receiving mouse reports\n";
-		}
-		break;
-
-	default:
-		return 0;
-	}
-	return snprintf(buf, PAGE_SIZE, retMsg);
-}
-
-static DEVICE_ATTR(diagnostic, S_IRUGO, show_tabletDiagnosticMessage, NULL);
-
-/***********************************************************************
- * support routines for the 'stylus_upper' file. Note that this file
- * both displays current setting and allows for setting changing.
- */
-static ssize_t show_tabletStylusUpper(struct device *dev, struct device_attribute *attr, char *buf)
-{
-	struct aiptek *aiptek = dev_get_drvdata(dev);
-	char *s;
-
-	if (aiptek == NULL)
-		return 0;
-
-	switch (aiptek->curSetting.stylusButtonUpper) {
-	case AIPTEK_STYLUS_UPPER_BUTTON:
-		s = "upper";
-		break;
-
-	case AIPTEK_STYLUS_LOWER_BUTTON:
-		s = "lower";
-		break;
-
-	default:
-		s = "unknown";
-		break;
-	}
-	return snprintf(buf, PAGE_SIZE, "%s\n", s);
-}
-
-static ssize_t
-store_tabletStylusUpper(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
-{
-	struct aiptek *aiptek = dev_get_drvdata(dev);
-
-	if (aiptek == NULL)
-		return 0;
-
-	if (strcmp(buf, "upper") == 0) {
-		aiptek->newSetting.stylusButtonUpper =
-		    AIPTEK_STYLUS_UPPER_BUTTON;
-	} else if (strcmp(buf, "lower") == 0) {
-		aiptek->newSetting.stylusButtonUpper =
-		    AIPTEK_STYLUS_LOWER_BUTTON;
-	}
-	return count;
-}
-
-static DEVICE_ATTR(stylus_upper,
-		   S_IRUGO | S_IWUGO,
-		   show_tabletStylusUpper, store_tabletStylusUpper);
-
-/***********************************************************************
- * support routines for the 'stylus_lower' file. Note that this file
- * both displays current setting and allows for setting changing.
- */
-static ssize_t show_tabletStylusLower(struct device *dev, struct device_attribute *attr, char *buf)
-{
-	struct aiptek *aiptek = dev_get_drvdata(dev);
-	char *s;
-
-	if (aiptek == NULL)
-		return 0;
-
-	switch (aiptek->curSetting.stylusButtonLower) {
-	case AIPTEK_STYLUS_UPPER_BUTTON:
-		s = "upper";
-		break;
-
-	case AIPTEK_STYLUS_LOWER_BUTTON:
-		s = "lower";
-		break;
-
-	default:
-		s = "unknown";
-		break;
-	}
-	return snprintf(buf, PAGE_SIZE, "%s\n", s);
-}
-
-static ssize_t
-store_tabletStylusLower(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
-{
-	struct aiptek *aiptek = dev_get_drvdata(dev);
-
-	if (aiptek == NULL)
-		return 0;
-
-	if (strcmp(buf, "upper") == 0) {
-		aiptek->newSetting.stylusButtonLower =
-		    AIPTEK_STYLUS_UPPER_BUTTON;
-	} else if (strcmp(buf, "lower") == 0) {
-		aiptek->newSetting.stylusButtonLower =
-		    AIPTEK_STYLUS_LOWER_BUTTON;
-	}
-	return count;
-}
-
-static DEVICE_ATTR(stylus_lower,
-		   S_IRUGO | S_IWUGO,
-		   show_tabletStylusLower, store_tabletStylusLower);
-
-/***********************************************************************
- * support routines for the 'mouse_left' file. Note that this file
- * both displays current setting and allows for setting changing.
- */
-static ssize_t show_tabletMouseLeft(struct device *dev, struct device_attribute *attr, char *buf)
-{
-	struct aiptek *aiptek = dev_get_drvdata(dev);
-	char *s;
-
-	if (aiptek == NULL)
-		return 0;
-
-	switch (aiptek->curSetting.mouseButtonLeft) {
-	case AIPTEK_MOUSE_LEFT_BUTTON:
-		s = "left";
-		break;
-
-	case AIPTEK_MOUSE_MIDDLE_BUTTON:
-		s = "middle";
-		break;
-
-	case AIPTEK_MOUSE_RIGHT_BUTTON:
-		s = "right";
-		break;
-
-	default:
-		s = "unknown";
-		break;
-	}
-	return snprintf(buf, PAGE_SIZE, "%s\n", s);
-}
-
-static ssize_t
-store_tabletMouseLeft(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
-{
-	struct aiptek *aiptek = dev_get_drvdata(dev);
-
-	if (aiptek == NULL)
-		return 0;
-
-	if (strcmp(buf, "left") == 0) {
-		aiptek->newSetting.mouseButtonLeft = AIPTEK_MOUSE_LEFT_BUTTON;
-	} else if (strcmp(buf, "middle") == 0) {
-		aiptek->newSetting.mouseButtonLeft = AIPTEK_MOUSE_MIDDLE_BUTTON;
-	} else if (strcmp(buf, "right") == 0) {
-		aiptek->newSetting.mouseButtonLeft = AIPTEK_MOUSE_RIGHT_BUTTON;
-	}
-	return count;
-}
-
-static DEVICE_ATTR(mouse_left,
-		   S_IRUGO | S_IWUGO,
-		   show_tabletMouseLeft, store_tabletMouseLeft);
-
-/***********************************************************************
- * support routines for the 'mouse_middle' file. Note that this file
- * both displays current setting and allows for setting changing.
- */
-static ssize_t show_tabletMouseMiddle(struct device *dev, struct device_attribute *attr, char *buf)
-{
-	struct aiptek *aiptek = dev_get_drvdata(dev);
-	char *s;
-
-	if (aiptek == NULL)
-		return 0;
-
-	switch (aiptek->curSetting.mouseButtonMiddle) {
-	case AIPTEK_MOUSE_LEFT_BUTTON:
-		s = "left";
-		break;
-
-	case AIPTEK_MOUSE_MIDDLE_BUTTON:
-		s = "middle";
-		break;
-
-	case AIPTEK_MOUSE_RIGHT_BUTTON:
-		s = "right";
-		break;
-
-	default:
-		s = "unknown";
-		break;
-	}
-	return snprintf(buf, PAGE_SIZE, "%s\n", s);
-}
-
-static ssize_t
-store_tabletMouseMiddle(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
-{
-	struct aiptek *aiptek = dev_get_drvdata(dev);
-
-	if (aiptek == NULL)
-		return 0;
-
-	if (strcmp(buf, "left") == 0) {
-		aiptek->newSetting.mouseButtonMiddle = AIPTEK_MOUSE_LEFT_BUTTON;
-	} else if (strcmp(buf, "middle") == 0) {
-		aiptek->newSetting.mouseButtonMiddle =
-		    AIPTEK_MOUSE_MIDDLE_BUTTON;
-	} else if (strcmp(buf, "right") == 0) {
-		aiptek->newSetting.mouseButtonMiddle =
-		    AIPTEK_MOUSE_RIGHT_BUTTON;
-	}
-	return count;
-}
-
-static DEVICE_ATTR(mouse_middle,
-		   S_IRUGO | S_IWUGO,
-		   show_tabletMouseMiddle, store_tabletMouseMiddle);
-
-/***********************************************************************
- * support routines for the 'mouse_right' file. Note that this file
- * both displays current setting and allows for setting changing.
- */
-static ssize_t show_tabletMouseRight(struct device *dev, struct device_attribute *attr, char *buf)
-{
-	struct aiptek *aiptek = dev_get_drvdata(dev);
-	char *s;
-
-	if (aiptek == NULL)
-		return 0;
-
-	switch (aiptek->curSetting.mouseButtonRight) {
-	case AIPTEK_MOUSE_LEFT_BUTTON:
-		s = "left";
-		break;
-
-	case AIPTEK_MOUSE_MIDDLE_BUTTON:
-		s = "middle";
-		break;
-
-	case AIPTEK_MOUSE_RIGHT_BUTTON:
-		s = "right";
-		break;
-
-	default:
-		s = "unknown";
-		break;
-	}
-	return snprintf(buf, PAGE_SIZE, "%s\n", s);
-}
-
-static ssize_t
-store_tabletMouseRight(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
-{
-	struct aiptek *aiptek = dev_get_drvdata(dev);
-
-	if (aiptek == NULL)
-		return 0;
-
-	if (strcmp(buf, "left") == 0) {
-		aiptek->newSetting.mouseButtonRight = AIPTEK_MOUSE_LEFT_BUTTON;
-	} else if (strcmp(buf, "middle") == 0) {
-		aiptek->newSetting.mouseButtonRight =
-		    AIPTEK_MOUSE_MIDDLE_BUTTON;
-	} else if (strcmp(buf, "right") == 0) {
-		aiptek->newSetting.mouseButtonRight = AIPTEK_MOUSE_RIGHT_BUTTON;
-	}
-	return count;
-}
-
-static DEVICE_ATTR(mouse_right,
-		   S_IRUGO | S_IWUGO,
-		   show_tabletMouseRight, store_tabletMouseRight);
-
-/***********************************************************************
- * support routines for the 'wheel' file. Note that this file
- * both displays current setting and allows for setting changing.
- */
-static ssize_t show_tabletWheel(struct device *dev, struct device_attribute *attr, char *buf)
-{
-	struct aiptek *aiptek = dev_get_drvdata(dev);
-
-	if (aiptek == NULL)
-		return 0;
-
-	if (aiptek->curSetting.wheel == AIPTEK_WHEEL_DISABLE) {
-		return snprintf(buf, PAGE_SIZE, "disable\n");
-	} else {
-		return snprintf(buf, PAGE_SIZE, "%d\n",
-				aiptek->curSetting.wheel);
-	}
-}
-
-static ssize_t
-store_tabletWheel(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
-{
-	struct aiptek *aiptek = dev_get_drvdata(dev);
-
-	if (aiptek == NULL)
-		return 0;
-
-	aiptek->newSetting.wheel = (int)simple_strtol(buf, NULL, 10);
-	return count;
-}
-
-static DEVICE_ATTR(wheel,
-		   S_IRUGO | S_IWUGO, show_tabletWheel, store_tabletWheel);
-
-/***********************************************************************
- * support routines for the 'execute' file. Note that this file
- * both displays current setting and allows for setting changing.
- */
-static ssize_t show_tabletExecute(struct device *dev, struct device_attribute *attr, char *buf)
-{
-	struct aiptek *aiptek = dev_get_drvdata(dev);
-
-	if (aiptek == NULL)
-		return 0;
-
-	/* There is nothing useful to display, so a one-line manual
-	 * is in order...
-	 */
-	return snprintf(buf, PAGE_SIZE,
-			"Write anything to this file to program your tablet.\n");
-}
-
-static ssize_t
-store_tabletExecute(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
-{
-	struct aiptek *aiptek = dev_get_drvdata(dev);
-
-	if (aiptek == NULL)
-		return 0;
-
-	/* We do not care what you write to this file. Merely the action
-	 * of writing to this file triggers a tablet reprogramming.
-	 */
-	memcpy(&aiptek->curSetting, &aiptek->newSetting,
-	       sizeof(struct aiptek_settings));
-
-	if (aiptek_program_tablet(aiptek) < 0)
-		return -EIO;
-
-	return count;
-}
-
-static DEVICE_ATTR(execute,
-		   S_IRUGO | S_IWUGO, show_tabletExecute, store_tabletExecute);
-
-/***********************************************************************
- * support routines for the 'odm_code' file. Note that this file
- * only displays current setting.
- */
-static ssize_t show_tabletODMCode(struct device *dev, struct device_attribute *attr, char *buf)
-{
-	struct aiptek *aiptek = dev_get_drvdata(dev);
-
-	if (aiptek == NULL)
-		return 0;
-
-	return snprintf(buf, PAGE_SIZE, "0x%04x\n", aiptek->features.odmCode);
-}
-
-static DEVICE_ATTR(odm_code, S_IRUGO, show_tabletODMCode, NULL);
-
-/***********************************************************************
- * support routines for the 'model_code' file. Note that this file
- * only displays current setting.
- */
-static ssize_t show_tabletModelCode(struct device *dev, struct device_attribute *attr, char *buf)
-{
-	struct aiptek *aiptek = dev_get_drvdata(dev);
-
-	if (aiptek == NULL)
-		return 0;
-
-	return snprintf(buf, PAGE_SIZE, "0x%04x\n", aiptek->features.modelCode);
-}
-
-static DEVICE_ATTR(model_code, S_IRUGO, show_tabletModelCode, NULL);
-
-/***********************************************************************
- * support routines for the 'firmware_code' file. Note that this file
- * only displays current setting.
- */
-static ssize_t show_firmwareCode(struct device *dev, struct device_attribute *attr, char *buf)
-{
-	struct aiptek *aiptek = dev_get_drvdata(dev);
-
-	if (aiptek == NULL)
-		return 0;
-
-	return snprintf(buf, PAGE_SIZE, "%04x\n",
-			aiptek->features.firmwareCode);
-}
-
-static DEVICE_ATTR(firmware_code, S_IRUGO, show_firmwareCode, NULL);
-
-/***********************************************************************
- * This routine removes all existing sysfs files managed by this device
- * driver.
- */
-static void aiptek_delete_files(struct device *dev)
-{
-	device_remove_file(dev, &dev_attr_size);
-	device_remove_file(dev, &dev_attr_product_id);
-	device_remove_file(dev, &dev_attr_vendor_id);
-	device_remove_file(dev, &dev_attr_vendor);
-	device_remove_file(dev, &dev_attr_product);
-	device_remove_file(dev, &dev_attr_pointer_mode);
-	device_remove_file(dev, &dev_attr_coordinate_mode);
-	device_remove_file(dev, &dev_attr_tool_mode);
-	device_remove_file(dev, &dev_attr_xtilt);
-	device_remove_file(dev, &dev_attr_ytilt);
-	device_remove_file(dev, &dev_attr_jitter);
-	device_remove_file(dev, &dev_attr_delay);
-	device_remove_file(dev, &dev_attr_input_path);
-	device_remove_file(dev, &dev_attr_event_count);
-	device_remove_file(dev, &dev_attr_diagnostic);
-	device_remove_file(dev, &dev_attr_odm_code);
-	device_remove_file(dev, &dev_attr_model_code);
-	device_remove_file(dev, &dev_attr_firmware_code);
-	device_remove_file(dev, &dev_attr_stylus_lower);
-	device_remove_file(dev, &dev_attr_stylus_upper);
-	device_remove_file(dev, &dev_attr_mouse_left);
-	device_remove_file(dev, &dev_attr_mouse_middle);
-	device_remove_file(dev, &dev_attr_mouse_right);
-	device_remove_file(dev, &dev_attr_wheel);
-	device_remove_file(dev, &dev_attr_execute);
-}
-
-/***********************************************************************
- * This routine creates the sysfs files managed by this device
- * driver.
- */
-static int aiptek_add_files(struct device *dev)
-{
-	int ret;
-
-	if ((ret = device_create_file(dev, &dev_attr_size)) ||
-	    (ret = device_create_file(dev, &dev_attr_product_id)) ||
-	    (ret = device_create_file(dev, &dev_attr_vendor_id)) ||
-	    (ret = device_create_file(dev, &dev_attr_vendor)) ||
-	    (ret = device_create_file(dev, &dev_attr_product)) ||
-	    (ret = device_create_file(dev, &dev_attr_pointer_mode)) ||
-	    (ret = device_create_file(dev, &dev_attr_coordinate_mode)) ||
-	    (ret = device_create_file(dev, &dev_attr_tool_mode)) ||
-	    (ret = device_create_file(dev, &dev_attr_xtilt)) ||
-	    (ret = device_create_file(dev, &dev_attr_ytilt)) ||
-	    (ret = device_create_file(dev, &dev_attr_jitter)) ||
-	    (ret = device_create_file(dev, &dev_attr_delay)) ||
-	    (ret = device_create_file(dev, &dev_attr_input_path)) ||
-	    (ret = device_create_file(dev, &dev_attr_event_count)) ||
-	    (ret = device_create_file(dev, &dev_attr_diagnostic)) ||
-	    (ret = device_create_file(dev, &dev_attr_odm_code)) ||
-	    (ret = device_create_file(dev, &dev_attr_model_code)) ||
-	    (ret = device_create_file(dev, &dev_attr_firmware_code)) ||
-	    (ret = device_create_file(dev, &dev_attr_stylus_lower)) ||
-	    (ret = device_create_file(dev, &dev_attr_stylus_upper)) ||
-	    (ret = device_create_file(dev, &dev_attr_mouse_left)) ||
-	    (ret = device_create_file(dev, &dev_attr_mouse_middle)) ||
-	    (ret = device_create_file(dev, &dev_attr_mouse_right)) ||
-	    (ret = device_create_file(dev, &dev_attr_wheel)) ||
-	    (ret = device_create_file(dev, &dev_attr_execute))) {
-		err("aiptek: killing own sysfs device files\n");
-		aiptek_delete_files(dev);
-	}
-	return ret;
-}
-
-/***********************************************************************
- * This routine is called when a tablet has been identified. It basically
- * sets up the tablet and the driver's internal structures.
- */
-static int
-aiptek_probe(struct usb_interface *intf, const struct usb_device_id *id)
-{
-	struct usb_device *usbdev = interface_to_usbdev(intf);
-	struct usb_endpoint_descriptor *endpoint;
-	struct aiptek *aiptek;
-	struct input_dev *inputdev;
-	struct input_handle *inputhandle;
-	struct list_head *node, *next;
-	int i;
-	int speeds[] = { 0,
-		AIPTEK_PROGRAMMABLE_DELAY_50,
-		AIPTEK_PROGRAMMABLE_DELAY_400,
-		AIPTEK_PROGRAMMABLE_DELAY_25,
-		AIPTEK_PROGRAMMABLE_DELAY_100,
-		AIPTEK_PROGRAMMABLE_DELAY_200,
-		AIPTEK_PROGRAMMABLE_DELAY_300
-	};
-	int err = -ENOMEM;
-
-	/* programmableDelay is where the command-line specified
-	 * delay is kept. We make it the first element of speeds[],
-	 * so therefore, your override speed is tried first, then the
-	 * remainder. Note that the default value of 400ms will be tried
-	 * if you do not specify any command line parameter.
-	 */
-	speeds[0] = programmableDelay;
-
-	aiptek = kzalloc(sizeof(struct aiptek), GFP_KERNEL);
-	inputdev = input_allocate_device();
-	if (!aiptek || !inputdev)
-		goto fail1;
-
-	aiptek->data = usb_buffer_alloc(usbdev, AIPTEK_PACKET_LENGTH,
-					GFP_ATOMIC, &aiptek->data_dma);
-	if (!aiptek->data)
-		goto fail1;
-
-	aiptek->urb = usb_alloc_urb(0, GFP_KERNEL);
-	if (!aiptek->urb)
-		goto fail2;
-
-	aiptek->inputdev = inputdev;
-	aiptek->usbdev = usbdev;
-	aiptek->ifnum = intf->altsetting[0].desc.bInterfaceNumber;
-	aiptek->inDelay = 0;
-	aiptek->endDelay = 0;
-	aiptek->previousJitterable = 0;
-
-	/* Set up the curSettings struct. Said struct contains the current
-	 * programmable parameters. The newSetting struct contains changes
-	 * the user makes to the settings via the sysfs interface. Those
-	 * changes are not "committed" to curSettings until the user
-	 * writes to the sysfs/.../execute file.
-	 */
-	aiptek->curSetting.pointerMode = AIPTEK_POINTER_EITHER_MODE;
-	aiptek->curSetting.coordinateMode = AIPTEK_COORDINATE_ABSOLUTE_MODE;
-	aiptek->curSetting.toolMode = AIPTEK_TOOL_BUTTON_PEN_MODE;
-	aiptek->curSetting.xTilt = AIPTEK_TILT_DISABLE;
-	aiptek->curSetting.yTilt = AIPTEK_TILT_DISABLE;
-	aiptek->curSetting.mouseButtonLeft = AIPTEK_MOUSE_LEFT_BUTTON;
-	aiptek->curSetting.mouseButtonMiddle = AIPTEK_MOUSE_MIDDLE_BUTTON;
-	aiptek->curSetting.mouseButtonRight = AIPTEK_MOUSE_RIGHT_BUTTON;
-	aiptek->curSetting.stylusButtonUpper = AIPTEK_STYLUS_UPPER_BUTTON;
-	aiptek->curSetting.stylusButtonLower = AIPTEK_STYLUS_LOWER_BUTTON;
-	aiptek->curSetting.jitterDelay = jitterDelay;
-	aiptek->curSetting.programmableDelay = programmableDelay;
-
-	/* Both structs should have equivalent settings
-	 */
-	aiptek->newSetting = aiptek->curSetting;
-
-	/* Determine the usb devices' physical path.
-	 * Asketh not why we always pretend we're using "../input0",
-	 * but I suspect this will have to be refactored one
-	 * day if a single USB device can be a keyboard & a mouse
-	 * & a tablet, and the inputX number actually will tell
-	 * us something...
-	 */
-	usb_make_path(usbdev, aiptek->features.usbPath,
-			sizeof(aiptek->features.usbPath));
-	strlcat(aiptek->features.usbPath, "/input0",
-		sizeof(aiptek->features.usbPath));
-
-	/* Set up client data, pointers to open and close routines
-	 * for the input device.
-	 */
-	inputdev->name = "Aiptek";
-	inputdev->phys = aiptek->features.usbPath;
-	usb_to_input_id(usbdev, &inputdev->id);
-	inputdev->dev.parent = &intf->dev;
-
-	input_set_drvdata(inputdev, aiptek);
-
-	inputdev->open = aiptek_open;
-	inputdev->close = aiptek_close;
-
-	/* Now program the capacities of the tablet, in terms of being
-	 * an input device.
-	 */
-	inputdev->evbit[0] |= BIT(EV_KEY)
-	    | BIT(EV_ABS)
-	    | BIT(EV_REL)
-	    | BIT(EV_MSC);
-
-	inputdev->absbit[0] |= BIT(ABS_MISC);
-
-	inputdev->relbit[0] |=
-	    (BIT(REL_X) | BIT(REL_Y) | BIT(REL_WHEEL) | BIT(REL_MISC));
-
-	inputdev->keybit[LONG(BTN_LEFT)] |=
-	    (BIT(BTN_LEFT) | BIT(BTN_RIGHT) | BIT(BTN_MIDDLE));
-
-	inputdev->keybit[LONG(BTN_DIGI)] |=
-	    (BIT(BTN_TOOL_PEN) |
-	     BIT(BTN_TOOL_RUBBER) |
-	     BIT(BTN_TOOL_PENCIL) |
-	     BIT(BTN_TOOL_AIRBRUSH) |
-	     BIT(BTN_TOOL_BRUSH) |
-	     BIT(BTN_TOOL_MOUSE) |
-	     BIT(BTN_TOOL_LENS) |
-	     BIT(BTN_TOUCH) | BIT(BTN_STYLUS) | BIT(BTN_STYLUS2));
-
-	inputdev->mscbit[0] = BIT(MSC_SERIAL);
-
-	/* Programming the tablet macro keys needs to be done with a for loop
-	 * as the keycodes are discontiguous.
-	 */
-	for (i = 0; i < ARRAY_SIZE(macroKeyEvents); ++i)
-		set_bit(macroKeyEvents[i], inputdev->keybit);
-
-	/*
-	 * Program the input device coordinate capacities. We do not yet
-	 * know what maximum X, Y, and Z values are, so we're putting fake
-	 * values in. Later, we'll ask the tablet to put in the correct
-	 * values.
-	 */
-	input_set_abs_params(inputdev, ABS_X, 0, 2999, 0, 0);
-	input_set_abs_params(inputdev, ABS_Y, 0, 2249, 0, 0);
-	input_set_abs_params(inputdev, ABS_PRESSURE, 0, 511, 0, 0);
-	input_set_abs_params(inputdev, ABS_TILT_X, AIPTEK_TILT_MIN, AIPTEK_TILT_MAX, 0, 0);
-	input_set_abs_params(inputdev, ABS_TILT_Y, AIPTEK_TILT_MIN, AIPTEK_TILT_MAX, 0, 0);
-	input_set_abs_params(inputdev, ABS_WHEEL, AIPTEK_WHEEL_MIN, AIPTEK_WHEEL_MAX - 1, 0, 0);
-
-	endpoint = &intf->altsetting[0].endpoint[0].desc;
-
-	/* Go set up our URB, which is called when the tablet receives
-	 * input.
-	 */
-	usb_fill_int_urb(aiptek->urb,
-			 aiptek->usbdev,
-			 usb_rcvintpipe(aiptek->usbdev,
-					endpoint->bEndpointAddress),
-			 aiptek->data, 8, aiptek_irq, aiptek,
-			 endpoint->bInterval);
-
-	aiptek->urb->transfer_dma = aiptek->data_dma;
-	aiptek->urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
-
-	/* Program the tablet. This sets the tablet up in the mode
-	 * specified in newSetting, and also queries the tablet's
-	 * physical capacities.
-	 *
-	 * Sanity check: if a tablet doesn't like the slow programmatic
-	 * delay, we often get sizes of 0x0. Let's use that as an indicator
-	 * to try faster delays, up to 25 ms. If that logic fails, well, you'll
-	 * have to explain to us how your tablet thinks it's 0x0, and yet that's
-	 * not an error :-)
-	 */
-
-	for (i = 0; i < ARRAY_SIZE(speeds); ++i) {
-		aiptek->curSetting.programmableDelay = speeds[i];
-		(void)aiptek_program_tablet(aiptek);
-		if (aiptek->inputdev->absmax[ABS_X] > 0) {
-			info("input: Aiptek using %d ms programming speed\n",
-			     aiptek->curSetting.programmableDelay);
-			break;
-		}
-	}
-
-	/* Register the tablet as an Input Device
-	 */
-	err = input_register_device(aiptek->inputdev);
-	if (err)
-		goto fail2;
-
-	/* We now will look for the evdev device which is mapped to
-	 * the tablet. The partial name is kept in the link list of
-	 * input_handles associated with this input device.
-	 * What identifies an evdev input_handler is that it begins
-	 * with 'event', continues with a digit, and that in turn
-	 * is mapped to input/eventN.
-	 */
-	list_for_each_safe(node, next, &inputdev->h_list) {
-		inputhandle = to_handle(node);
-		if (strncmp(inputhandle->name, "event", 5) == 0) {
-			strcpy(aiptek->features.inputPath, inputhandle->name);
-			break;
-		}
-	}
-
-	/* Associate this driver's struct with the usb interface.
-	 */
-	usb_set_intfdata(intf, aiptek);
-
-	/* Set up the sysfs files
-	 */
-	aiptek_add_files(&intf->dev);
-
-	/* Make sure the evdev module is loaded. Assuming evdev IS a module :-)
-	 */
-	if (request_module("evdev") != 0)
-		info("aiptek: error loading 'evdev' module");
-
-	return 0;
-
- fail2:	usb_buffer_free(usbdev, AIPTEK_PACKET_LENGTH, aiptek->data,
-			aiptek->data_dma);
- fail1:	input_free_device(inputdev);
-	kfree(aiptek);
-	return err;
-}
-
-/***********************************************************************
- * Deal with tablet disconnecting from the system.
- */
-static void aiptek_disconnect(struct usb_interface *intf)
-{
-	struct aiptek *aiptek = usb_get_intfdata(intf);
-
-	/* Disassociate driver's struct with usb interface
-	 */
-	usb_set_intfdata(intf, NULL);
-	if (aiptek != NULL) {
-		/* Free & unhook everything from the system.
-		 */
-		usb_kill_urb(aiptek->urb);
-		input_unregister_device(aiptek->inputdev);
-		aiptek_delete_files(&intf->dev);
-		usb_free_urb(aiptek->urb);
-		usb_buffer_free(interface_to_usbdev(intf),
-				AIPTEK_PACKET_LENGTH,
-				aiptek->data, aiptek->data_dma);
-		kfree(aiptek);
-	}
-}
-
-static struct usb_driver aiptek_driver = {
-	.name = "aiptek",
-	.probe = aiptek_probe,
-	.disconnect = aiptek_disconnect,
-	.id_table = aiptek_ids,
-};
-
-static int __init aiptek_init(void)
-{
-	int result = usb_register(&aiptek_driver);
-	if (result == 0) {
-		info(DRIVER_VERSION ": " DRIVER_AUTHOR);
-		info(DRIVER_DESC);
-	}
-	return result;
-}
-
-static void __exit aiptek_exit(void)
-{
-	usb_deregister(&aiptek_driver);
-}
-
-MODULE_AUTHOR(DRIVER_AUTHOR);
-MODULE_DESCRIPTION(DRIVER_DESC);
-MODULE_LICENSE("GPL");
-
-module_param(programmableDelay, int, 0);
-MODULE_PARM_DESC(programmableDelay, "delay used during tablet programming");
-module_param(jitterDelay, int, 0);
-MODULE_PARM_DESC(jitterDelay, "stylus/mouse settlement delay");
-
-module_init(aiptek_init);
-module_exit(aiptek_exit);
diff --git a/drivers/usb/input/gtco.c b/drivers/usb/input/gtco.c
deleted file mode 100644
index b2ca10f2fe0e..000000000000
--- a/drivers/usb/input/gtco.c
+++ /dev/null
@@ -1,1055 +0,0 @@
-/*    -*- linux-c -*-
-
-GTCO digitizer USB driver
-
-Use the err(), dbg() and info() macros from usb.h for system logging
-
-TO CHECK:  Is pressure done right on report 5?
-
-Copyright (C) 2006  GTCO CalComp
-
-This program is free software; you can redistribute it and/or
-modify it under the terms of the GNU General Public License
-as published by the Free Software Foundation; version 2
-of the License.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program; if not, write to the Free Software
-Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
-
-Permission to use, copy, modify, distribute, and sell this software and its
-documentation for any purpose is hereby granted without fee, provided that
-the above copyright notice appear in all copies and that both that
-copyright notice and this permission notice appear in supporting
-documentation, and that the name of GTCO-CalComp not be used in advertising
-or publicity pertaining to distribution of the software without specific,
-written prior permission. GTCO-CalComp makes no representations about the
-suitability of this software for any purpose.  It is provided "as is"
-without express or implied warranty.
-
-GTCO-CALCOMP DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
-INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
-EVENT SHALL GTCO-CALCOMP BE LIABLE FOR ANY SPECIAL, INDIRECT OR
-CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE,
-DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER
-TORTIOUS ACTIONS, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
-PERFORMANCE OF THIS SOFTWARE.
-
-GTCO CalComp, Inc.
-7125 Riverwood Drive
-Columbia, MD 21046
-
-Jeremy Roberson jroberson@gtcocalcomp.com
-Scott Hill shill@gtcocalcomp.com
-*/
-
-
-
-/*#define DEBUG*/
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/errno.h>
-#include <linux/init.h>
-#include <linux/slab.h>
-#include <linux/input.h>
-#include <linux/usb.h>
-#include <asm/uaccess.h>
-#include <asm/unaligned.h>
-#include <asm/byteorder.h>
-
-
-#include <linux/version.h>
-#include <linux/usb/input.h>
-
-/* Version with a Major number of 2 is for kernel inclusion only. */
-#define  GTCO_VERSION   "2.00.0006"
-
-
-/*   MACROS  */
-
-#define VENDOR_ID_GTCO	      0x078C
-#define PID_400               0x400
-#define PID_401               0x401
-#define PID_1000              0x1000
-#define PID_1001              0x1001
-#define PID_1002              0x1002
-
-/* Max size of a single report */
-#define REPORT_MAX_SIZE       10
-
-
-/* Bitmask whether pen is in range */
-#define MASK_INRANGE 0x20
-#define MASK_BUTTON  0x01F
-
-#define  PATHLENGTH     64
-
-/* DATA STRUCTURES */
-
-/* Device table */
-static struct usb_device_id gtco_usbid_table [] = {
-	{ USB_DEVICE(VENDOR_ID_GTCO, PID_400) },
-	{ USB_DEVICE(VENDOR_ID_GTCO, PID_401) },
-	{ USB_DEVICE(VENDOR_ID_GTCO, PID_1000) },
-	{ USB_DEVICE(VENDOR_ID_GTCO, PID_1001) },
-	{ USB_DEVICE(VENDOR_ID_GTCO, PID_1002) },
-	{ }
-};
-MODULE_DEVICE_TABLE (usb, gtco_usbid_table);
-
-
-/* Structure to hold all of our device specific stuff */
-struct gtco {
-
-	struct input_dev  *inputdevice; /* input device struct pointer  */
-	struct usb_device *usbdev; /* the usb device for this device */
-	struct urb        *urbinfo;	 /* urb for incoming reports      */
-	dma_addr_t        buf_dma;  /* dma addr of the data buffer*/
-	unsigned char *   buffer;   /* databuffer for reports */
-
-	char  usbpath[PATHLENGTH];
-	int   openCount;
-
-	/* Information pulled from Report Descriptor */
-	u32  usage;
-	u32  min_X;
-	u32  max_X;
-	u32  min_Y;
-	u32  max_Y;
-	s8   mintilt_X;
-	s8   maxtilt_X;
-	s8   mintilt_Y;
-	s8   maxtilt_Y;
-	u32  maxpressure;
-	u32  minpressure;
-};
-
-
-
-/*   Code for parsing the HID REPORT DESCRIPTOR          */
-
-/* From HID1.11 spec */
-struct hid_descriptor
-{
-	struct usb_descriptor_header header;
-	__le16   bcdHID;
-	u8       bCountryCode;
-	u8       bNumDescriptors;
-	u8       bDescriptorType;
-	__le16   wDescriptorLength;
-} __attribute__ ((packed));
-
-
-#define HID_DESCRIPTOR_SIZE   9
-#define HID_DEVICE_TYPE       33
-#define REPORT_DEVICE_TYPE    34
-
-
-#define PREF_TAG(x)     ((x)>>4)
-#define PREF_TYPE(x)    ((x>>2)&0x03)
-#define PREF_SIZE(x)    ((x)&0x03)
-
-#define TYPE_MAIN       0
-#define TYPE_GLOBAL     1
-#define TYPE_LOCAL      2
-#define TYPE_RESERVED   3
-
-#define TAG_MAIN_INPUT        0x8
-#define TAG_MAIN_OUTPUT       0x9
-#define TAG_MAIN_FEATURE      0xB
-#define TAG_MAIN_COL_START    0xA
-#define TAG_MAIN_COL_END      0xC
-
-#define TAG_GLOB_USAGE        0
-#define TAG_GLOB_LOG_MIN      1
-#define TAG_GLOB_LOG_MAX      2
-#define TAG_GLOB_PHYS_MIN     3
-#define TAG_GLOB_PHYS_MAX     4
-#define TAG_GLOB_UNIT_EXP     5
-#define TAG_GLOB_UNIT         6
-#define TAG_GLOB_REPORT_SZ    7
-#define TAG_GLOB_REPORT_ID    8
-#define TAG_GLOB_REPORT_CNT   9
-#define TAG_GLOB_PUSH         10
-#define TAG_GLOB_POP          11
-
-#define TAG_GLOB_MAX          12
-
-#define DIGITIZER_USAGE_TIP_PRESSURE   0x30
-#define DIGITIZER_USAGE_TILT_X         0x3D
-#define DIGITIZER_USAGE_TILT_Y         0x3E
-
-
-/*
- *   This is an abbreviated parser for the HID Report Descriptor.  We
- *   know what devices we are talking to, so this is by no means meant
- *   to be generic.  We can make some safe assumptions:
- *
- *   - We know there are no LONG tags, all short
- *   - We know that we have no MAIN Feature and MAIN Output items
- *   - We know what the IRQ reports are supposed to look like.
- *
- *   The main purpose of this is to use the HID report desc to figure
- *   out the mins and maxs of the fields in the IRQ reports.  The IRQ
- *   reports for 400/401 change slightly if the max X is bigger than 64K.
- *
- */
-static void parse_hid_report_descriptor(struct gtco *device, char * report,
-					int length)
-{
-	int   x, i = 0;
-
-	/* Tag primitive vars */
-	__u8   prefix;
-	__u8   size;
-	__u8   tag;
-	__u8   type;
-	__u8   data   = 0;
-	__u16  data16 = 0;
-	__u32  data32 = 0;
-
-	/* For parsing logic */
-	int   inputnum = 0;
-	__u32 usage = 0;
-
-	/* Global Values, indexed by TAG */
-	__u32 globalval[TAG_GLOB_MAX];
-	__u32 oldval[TAG_GLOB_MAX];
-
-	/* Debug stuff */
-	char  maintype = 'x';
-	char  globtype[12];
-	int   indent = 0;
-	char  indentstr[10] = "";
-
-
-	dbg("======>>>>>>PARSE<<<<<<======");
-
-	/* Walk  this report and pull out the info we need */
-	while (i < length) {
-		prefix = report[i];
-
-		/* Skip over prefix */
-		i++;
-
-		/* Determine data size and save the data in the proper variable */
-		size = PREF_SIZE(prefix);
-		switch (size) {
-		case 1:
-			data = report[i];
-			break;
-		case 2:
-			data16 = le16_to_cpu(get_unaligned((__le16 *)&report[i]));
-			break;
-		case 3:
-			size = 4;
-			data32 = le32_to_cpu(get_unaligned((__le32 *)&report[i]));
-			break;
-		}
-
-		/* Skip size of data */
-		i += size;
-
-		/* What we do depends on the tag type */
-		tag  = PREF_TAG(prefix);
-		type = PREF_TYPE(prefix);
-		switch (type) {
-		case TYPE_MAIN:
-			strcpy(globtype, "");
-			switch (tag) {
-
-			case TAG_MAIN_INPUT:
-				/*
-				 * The INPUT MAIN tag signifies this is
-				 * information from a report.  We need to
-				 * figure out what it is and store the
-				 * min/max values
-				 */
-
-				maintype = 'I';
-				if (data == 2)
-					strcpy(globtype, "Variable");
-				else if (data == 3)
-					strcpy(globtype, "Var|Const");
-
-				dbg("::::: Saving Report: %d input #%d Max: 0x%X(%d) Min:0x%X(%d) of %d bits",
-				    globalval[TAG_GLOB_REPORT_ID], inputnum,
-				    globalval[TAG_GLOB_LOG_MAX], globalval[TAG_GLOB_LOG_MAX],
-				    globalval[TAG_GLOB_LOG_MIN], globalval[TAG_GLOB_LOG_MIN],
-				    globalval[TAG_GLOB_REPORT_SZ] * globalval[TAG_GLOB_REPORT_CNT]);
-
-
-				/*
-				  We can assume that the first two input items
-				  are always the X and Y coordinates.  After
-				  that, we look for everything else by
-				  local usage value
-				 */
-				switch (inputnum) {
-				case 0:  /* X coord */
-					dbg("GER: X Usage: 0x%x", usage);
-					if (device->max_X == 0) {
-						device->max_X = globalval[TAG_GLOB_LOG_MAX];
-						device->min_X = globalval[TAG_GLOB_LOG_MIN];
-					}
-					break;
-
-				case 1:  /* Y coord */
-					dbg("GER: Y Usage: 0x%x", usage);
-					if (device->max_Y == 0) {
-						device->max_Y = globalval[TAG_GLOB_LOG_MAX];
-						device->min_Y = globalval[TAG_GLOB_LOG_MIN];
-					}
-					break;
-
-				default:
-					/* Tilt X */
-					if (usage == DIGITIZER_USAGE_TILT_X) {
-						if (device->maxtilt_X == 0) {
-							device->maxtilt_X = globalval[TAG_GLOB_LOG_MAX];
-							device->mintilt_X = globalval[TAG_GLOB_LOG_MIN];
-						}
-					}
-
-					/* Tilt Y */
-					if (usage == DIGITIZER_USAGE_TILT_Y) {
-						if (device->maxtilt_Y == 0) {
-							device->maxtilt_Y = globalval[TAG_GLOB_LOG_MAX];
-							device->mintilt_Y = globalval[TAG_GLOB_LOG_MIN];
-						}
-					}
-
-					/* Pressure */
-					if (usage == DIGITIZER_USAGE_TIP_PRESSURE) {
-						if (device->maxpressure == 0) {
-							device->maxpressure = globalval[TAG_GLOB_LOG_MAX];
-							device->minpressure = globalval[TAG_GLOB_LOG_MIN];
-						}
-					}
-
-					break;
-				}
-
-				inputnum++;
-				break;
-
-			case TAG_MAIN_OUTPUT:
-				maintype = 'O';
-				break;
-
-			case TAG_MAIN_FEATURE:
-				maintype = 'F';
-				break;
-
-			case TAG_MAIN_COL_START:
-				maintype = 'S';
-
-				if (data == 0) {
-					dbg("======>>>>>> Physical");
-					strcpy(globtype, "Physical");
-				} else
-					dbg("======>>>>>>");
-
-				/* Indent the debug output */
-				indent++;
-				for (x = 0; x < indent; x++)
-					indentstr[x] = '-';
-				indentstr[x] = 0;
-
-				/* Save global tags */
-				for (x = 0; x < TAG_GLOB_MAX; x++)
-					oldval[x] = globalval[x];
-
-				break;
-
-			case TAG_MAIN_COL_END:
-				dbg("<<<<<<======");
-				maintype = 'E';
-				indent--;
-				for (x = 0; x < indent; x++)
-					indentstr[x] = '-';
-				indentstr[x] = 0;
-
-				/* Copy global tags back */
-				for (x = 0; x < TAG_GLOB_MAX; x++)
-					globalval[x] = oldval[x];
-
-				break;
-			}
-
-			switch (size) {
-			case 1:
-				dbg("%sMAINTAG:(%d) %c SIZE: %d Data: %s 0x%x",
-				    indentstr, tag, maintype, size, globtype, data);
-				break;
-
-			case 2:
-				dbg("%sMAINTAG:(%d) %c SIZE: %d Data: %s 0x%x",
-				    indentstr, tag, maintype, size, globtype, data16);
-				break;
-
-			case 4:
-				dbg("%sMAINTAG:(%d) %c SIZE: %d Data: %s 0x%x",
-				    indentstr, tag, maintype, size, globtype, data32);
-				break;
-			}
-			break;
-
-		case TYPE_GLOBAL:
-			switch (tag) {
-			case TAG_GLOB_USAGE:
-				/*
-				 * First time we hit the global usage tag,
-				 * it should tell us the type of device
-				 */
-				if (device->usage == 0)
-					device->usage = data;
-
-				strcpy(globtype, "USAGE");
-				break;
-
-			case TAG_GLOB_LOG_MIN:
-				strcpy(globtype, "LOG_MIN");
-				break;
-
-			case TAG_GLOB_LOG_MAX:
-				strcpy(globtype, "LOG_MAX");
-				break;
-
-			case TAG_GLOB_PHYS_MIN:
-				strcpy(globtype, "PHYS_MIN");
-				break;
-
-			case TAG_GLOB_PHYS_MAX:
-				strcpy(globtype, "PHYS_MAX");
-				break;
-
-			case TAG_GLOB_UNIT_EXP:
-				strcpy(globtype, "EXP");
-				break;
-
-			case TAG_GLOB_UNIT:
-				strcpy(globtype, "UNIT");
-				break;
-
-			case TAG_GLOB_REPORT_SZ:
-				strcpy(globtype, "REPORT_SZ");
-				break;
-
-			case TAG_GLOB_REPORT_ID:
-				strcpy(globtype, "REPORT_ID");
-				/* New report, restart numbering */
-				inputnum = 0;
-				break;
-
-			case TAG_GLOB_REPORT_CNT:
-				strcpy(globtype, "REPORT_CNT");
-				break;
-
-			case TAG_GLOB_PUSH:
-				strcpy(globtype, "PUSH");
-				break;
-
-			case TAG_GLOB_POP:
-				strcpy(globtype, "POP");
-				break;
-			}
-
-			/* Check to make sure we have a good tag number
-			   so we don't overflow array */
-			if (tag < TAG_GLOB_MAX) {
-				switch (size) {
-				case 1:
-					dbg("%sGLOBALTAG:%s(%d) SIZE: %d Data: 0x%x",
-					    indentstr, globtype, tag, size, data);
-					globalval[tag] = data;
-					break;
-
-				case 2:
-					dbg("%sGLOBALTAG:%s(%d) SIZE: %d Data: 0x%x",
-					    indentstr, globtype, tag, size, data16);
-					globalval[tag] = data16;
-					break;
-
-				case 4:
-					dbg("%sGLOBALTAG:%s(%d) SIZE: %d Data: 0x%x",
-					    indentstr, globtype, tag, size, data32);
-					globalval[tag] = data32;
-					break;
-				}
-			} else {
-				dbg("%sGLOBALTAG: ILLEGAL TAG:%d SIZE: %d ",
-				    indentstr, tag, size);
-			}
-			break;
-
-		case TYPE_LOCAL:
-			switch (tag) {
-			case TAG_GLOB_USAGE:
-				strcpy(globtype, "USAGE");
-				/* Always 1 byte */
-				usage = data;
-				break;
-
-			case TAG_GLOB_LOG_MIN:
-				strcpy(globtype, "MIN");
-				break;
-
-			case TAG_GLOB_LOG_MAX:
-				strcpy(globtype, "MAX");
-				break;
-
-			default:
-				strcpy(globtype, "UNKNOWN");
-				break;
-			}
-
-			switch (size) {
-			case 1:
-				dbg("%sLOCALTAG:(%d) %s SIZE: %d Data: 0x%x",
-				    indentstr, tag, globtype, size, data);
-				break;
-
-			case 2:
-				dbg("%sLOCALTAG:(%d) %s SIZE: %d Data: 0x%x",
-				    indentstr, tag, globtype, size, data16);
-				break;
-
-			case 4:
-				dbg("%sLOCALTAG:(%d) %s SIZE: %d Data: 0x%x",
-				    indentstr, tag, globtype, size, data32);
-				break;
-			}
-
-			break;
-		}
-	}
-}
-
-/*   INPUT DRIVER Routines                               */
-
-/*
- * Called when opening the input device.  This will submit the URB to
- * the usb system so we start getting reports
- */
-static int gtco_input_open(struct input_dev *inputdev)
-{
-	struct gtco *device = input_get_drvdata(inputdev);
-
-	device->urbinfo->dev = device->usbdev;
-	if (usb_submit_urb(device->urbinfo, GFP_KERNEL))
-		return -EIO;
-
-	return 0;
-}
-
-/*
- * Called when closing the input device.  This will unlink the URB
- */
-static void gtco_input_close(struct input_dev *inputdev)
-{
-	struct gtco *device = input_get_drvdata(inputdev);
-
-	usb_kill_urb(device->urbinfo);
-}
-
-
-/*
- *  Setup input device capabilities.  Tell the input system what this
- *  device is capable of generating.
- *
- *  This information is based on what is read from the HID report and
- *  placed in the struct gtco structure
- *
- */
-static void gtco_setup_caps(struct input_dev *inputdev)
-{
-	struct gtco *device = input_get_drvdata(inputdev);
-
-	/* Which events */
-	inputdev->evbit[0] = BIT(EV_KEY) | BIT(EV_ABS) | BIT(EV_MSC);
-
-	/* Misc event menu block */
-	inputdev->mscbit[0] = BIT(MSC_SCAN)|BIT(MSC_SERIAL)|BIT(MSC_RAW) ;
-
-	/* Absolute values based on HID report info */
-	input_set_abs_params(inputdev, ABS_X, device->min_X, device->max_X,
-			     0, 0);
-	input_set_abs_params(inputdev, ABS_Y, device->min_Y, device->max_Y,
-			     0, 0);
-
-	/* Proximity */
-	input_set_abs_params(inputdev, ABS_DISTANCE, 0, 1, 0, 0);
-
-	/* Tilt & pressure */
-	input_set_abs_params(inputdev, ABS_TILT_X, device->mintilt_X,
-			     device->maxtilt_X, 0, 0);
-	input_set_abs_params(inputdev, ABS_TILT_Y, device->mintilt_Y,
-			     device->maxtilt_Y, 0, 0);
-	input_set_abs_params(inputdev, ABS_PRESSURE, device->minpressure,
-			     device->maxpressure, 0, 0);
-
-	/* Transducer */
-	input_set_abs_params(inputdev, ABS_MISC, 0, 0xFF, 0, 0);
-}
-
-/*   USB Routines  */
-
-/*
- * URB callback routine.  Called when we get IRQ reports from the
- *  digitizer.
- *
- *  This bridges the USB and input device worlds.  It generates events
- *  on the input device based on the USB reports.
- */
-static void gtco_urb_callback(struct urb *urbinfo)
-{
-	struct gtco *device = urbinfo->context;
-	struct input_dev  *inputdev;
-	int               rc;
-	u32               val = 0;
-	s8                valsigned = 0;
-	char              le_buffer[2];
-
-	inputdev = device->inputdevice;
-
-	/* Was callback OK? */
-	if (urbinfo->status == -ECONNRESET ||
-	    urbinfo->status == -ENOENT ||
-	    urbinfo->status == -ESHUTDOWN) {
-
-		/* Shutdown is occurring. Return and don't queue up any more */
-		return;
-	}
-
-	if (urbinfo->status != 0) {
-		/*
-		 * Some unknown error.  Hopefully temporary. Just go and
-		 * requeue an URB
-		 */
-		goto resubmit;
-	}
-
-	/*
-	 * Good URB, now process
-	 */
-
-	/* PID dependent when we interpret the report */
-	if (inputdev->id.product == PID_1000 ||
-	    inputdev->id.product == PID_1001 ||
-	    inputdev->id.product == PID_1002) {
-
-		/*
-		 * Switch on the report ID
-		 * Conveniently, the reports have more information, the higher
-		 * the report number.  We can just fall through the case
-		 * statements if we start with the highest number report
-		 */
-		switch (device->buffer[0]) {
-		case 5:
-			/* Pressure is 9 bits */
-			val = ((u16)(device->buffer[8]) << 1);
-			val |= (u16)(device->buffer[7] >> 7);
-			input_report_abs(inputdev, ABS_PRESSURE,
-					 device->buffer[8]);
-
-			/* Mask out the Y tilt value used for pressure */
-			device->buffer[7] = (u8)((device->buffer[7]) & 0x7F);
-
-			/* Fall thru */
-		case 4:
-			/* Tilt */
-
-			/* Sign extend these 7 bit numbers.  */
-			if (device->buffer[6] & 0x40)
-				device->buffer[6] |= 0x80;
-
-			if (device->buffer[7] & 0x40)
-				device->buffer[7] |= 0x80;
-
-
-			valsigned = (device->buffer[6]);
-			input_report_abs(inputdev, ABS_TILT_X, (s32)valsigned);
-
-			valsigned = (device->buffer[7]);
-			input_report_abs(inputdev, ABS_TILT_Y, (s32)valsigned);
-
-			/* Fall thru */
-		case 2:
-		case 3:
-			/* Convert buttons, only 5 bits possible */
-			val = (device->buffer[5]) & MASK_BUTTON;
-
-			/* We don't apply any meaning to the bitmask,
-			   just report */
-			input_event(inputdev, EV_MSC, MSC_SERIAL, val);
-
-			/*  Fall thru */
-		case 1:
-			/* All reports have X and Y coords in the same place */
-			val = le16_to_cpu(get_unaligned((__le16 *)&device->buffer[1]));
-			input_report_abs(inputdev, ABS_X, val);
-
-			val = le16_to_cpu(get_unaligned((__le16 *)&device->buffer[3]));
-			input_report_abs(inputdev, ABS_Y, val);
-
-			/* Ditto for proximity bit */
-			val = device->buffer[5] & MASK_INRANGE ? 1 : 0;
-			input_report_abs(inputdev, ABS_DISTANCE, val);
-
-			/* Report 1 is an exception to how we handle buttons */
-			/* Buttons are an index, not a bitmask */
-			if (device->buffer[0] == 1) {
-
-				/*
-				 * Convert buttons, 5 bit index
-				 * Report value of index set as one,
-				 * the rest as 0
-				 */
-				val = device->buffer[5] & MASK_BUTTON;
-				dbg("======>>>>>>REPORT 1: val 0x%X(%d)",
-				    val, val);
-
-				/*
-				 * We don't apply any meaning to the button
-				 * index, just report it
-				 */
-				input_event(inputdev, EV_MSC, MSC_SERIAL, val);
-			}
-			break;
-
-		case 7:
-			/* Menu blocks */
-			input_event(inputdev, EV_MSC, MSC_SCAN,
-				    device->buffer[1]);
-			break;
-		}
-	}
-
-	/* Other pid class */
-	if (inputdev->id.product == PID_400 ||
-	    inputdev->id.product == PID_401) {
-
-		/* Report 2 */
-		if (device->buffer[0] == 2) {
-			/* Menu blocks */
-			input_event(inputdev, EV_MSC, MSC_SCAN, device->buffer[1]);
-		}
-
-		/*  Report 1 */
-		if (device->buffer[0] == 1) {
-			char buttonbyte;
-
-			/*  IF X max > 64K, we still a bit from the y report */
-			if (device->max_X > 0x10000) {
-
-				val = (u16)(((u16)(device->buffer[2] << 8)) | (u8)device->buffer[1]);
-				val |= (u32)(((u8)device->buffer[3] & 0x1) << 16);
-
-				input_report_abs(inputdev, ABS_X, val);
-
-				le_buffer[0]  = (u8)((u8)(device->buffer[3]) >> 1);
-				le_buffer[0] |= (u8)((device->buffer[3] & 0x1) << 7);
-
-				le_buffer[1]  = (u8)(device->buffer[4] >> 1);
-				le_buffer[1] |= (u8)((device->buffer[5] & 0x1) << 7);
-
-				val = le16_to_cpu(get_unaligned((__le16 *)le_buffer));
-				input_report_abs(inputdev, ABS_Y, val);
-
-				/*
-				 * Shift the button byte right by one to
-				 * make it look like the standard report
-				 */
-				buttonbyte = device->buffer[5] >> 1;
-			} else {
-
-				val = le16_to_cpu(get_unaligned((__le16 *)&device->buffer[1]));
-				input_report_abs(inputdev, ABS_X, val);
-
-				val = le16_to_cpu(get_unaligned((__le16 *)&device->buffer[3]));
-				input_report_abs(inputdev, ABS_Y, val);
-
-				buttonbyte = device->buffer[5];
-			}
-
-			/* BUTTONS and PROXIMITY */
-			val = buttonbyte & MASK_INRANGE ? 1 : 0;
-			input_report_abs(inputdev, ABS_DISTANCE, val);
-
-			/* Convert buttons, only 4 bits possible */
-			val = buttonbyte & 0x0F;
-#ifdef USE_BUTTONS
-			for (i = 0; i < 5; i++)
-				input_report_key(inputdev, BTN_DIGI + i, val & (1 << i));
-#else
-			/* We don't apply any meaning to the bitmask, just report */
-			input_event(inputdev, EV_MSC, MSC_SERIAL, val);
-#endif
-
-			/* TRANSDUCER */
-			input_report_abs(inputdev, ABS_MISC, device->buffer[6]);
-		}
-	}
-
-	/* Everybody gets report ID's */
-	input_event(inputdev, EV_MSC, MSC_RAW,  device->buffer[0]);
-
-	/* Sync it up */
-	input_sync(inputdev);
-
- resubmit:
-	rc = usb_submit_urb(urbinfo, GFP_ATOMIC);
-	if (rc != 0)
-		err("usb_submit_urb failed rc=0x%x", rc);
-}
-
-/*
- *  The probe routine.  This is called when the kernel find the matching USB
- *   vendor/product.  We do the following:
- *
- *    - Allocate mem for a local structure to manage the device
- *    - Request a HID Report Descriptor from the device and parse it to
- *      find out the device parameters
- *    - Create an input device and assign it attributes
- *   - Allocate an URB so the device can talk to us when the input
- *      queue is open
- */
-static int gtco_probe(struct usb_interface *usbinterface,
-		      const struct usb_device_id *id)
-{
-
-	struct gtco             *gtco;
-	struct input_dev        *input_dev;
-	struct hid_descriptor   *hid_desc;
-	char                    *report = NULL;
-	int                     result = 0, retry;
-	int			error;
-	struct usb_endpoint_descriptor *endpoint;
-
-	/* Allocate memory for device structure */
-	gtco = kzalloc(sizeof(struct gtco), GFP_KERNEL);
-	input_dev = input_allocate_device();
-	if (!gtco || !input_dev) {
-		err("No more memory");
-		error = -ENOMEM;
-		goto err_free_devs;
-	}
-
-	/* Set pointer to the input device */
-	gtco->inputdevice = input_dev;
-
-	/* Save interface information */
-	gtco->usbdev = usb_get_dev(interface_to_usbdev(usbinterface));
-
-	/* Allocate some data for incoming reports */
-	gtco->buffer = usb_buffer_alloc(gtco->usbdev, REPORT_MAX_SIZE,
-					GFP_KERNEL, &gtco->buf_dma);
-	if (!gtco->buffer) {
-		err("No more memory for us buffers");
-		error = -ENOMEM;
-		goto err_free_devs;
-	}
-
-	/* Allocate URB for reports */
-	gtco->urbinfo = usb_alloc_urb(0, GFP_KERNEL);
-	if (!gtco->urbinfo) {
-		err("Failed to allocate URB");
-		return -ENOMEM;
-		goto err_free_buf;
-	}
-
-	/*
-	 * The endpoint is always altsetting 0, we know this since we know
-	 * this device only has one interrupt endpoint
-	 */
-	endpoint = &usbinterface->altsetting[0].endpoint[0].desc;
-
-	/* Some debug */
-	dbg("gtco # interfaces: %d", usbinterface->num_altsetting);
-	dbg("num endpoints:     %d", usbinterface->cur_altsetting->desc.bNumEndpoints);
-	dbg("interface class:   %d", usbinterface->cur_altsetting->desc.bInterfaceClass);
-	dbg("endpoint: attribute:0x%x type:0x%x", endpoint->bmAttributes, endpoint->bDescriptorType);
-	if ((endpoint->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) == USB_ENDPOINT_XFER_INT)
-		dbg("endpoint: we have interrupt endpoint\n");
-
-	dbg("endpoint extra len:%d ", usbinterface->altsetting[0].extralen);
-
-	/*
-	 * Find the HID descriptor so we can find out the size of the
-	 * HID report descriptor
-	 */
-	if (usb_get_extra_descriptor(usbinterface->cur_altsetting,
-				     HID_DEVICE_TYPE, &hid_desc) != 0){
-		err("Can't retrieve exta USB descriptor to get hid report descriptor length");
-		error = -EIO;
-		goto err_free_urb;
-	}
-
-	dbg("Extra descriptor success: type:%d  len:%d",
-	    hid_desc->bDescriptorType,  hid_desc->wDescriptorLength);
-
-	report = kzalloc(hid_desc->wDescriptorLength, GFP_KERNEL);
-	if (!report) {
-		err("No more memory for report");
-		error = -ENOMEM;
-		goto err_free_urb;
-	}
-
-	/* Couple of tries to get reply */
-	for (retry = 0; retry < 3; retry++) {
-		result = usb_control_msg(gtco->usbdev,
-					 usb_rcvctrlpipe(gtco->usbdev, 0),
-					 USB_REQ_GET_DESCRIPTOR,
-					 USB_RECIP_INTERFACE | USB_DIR_IN,
-					 REPORT_DEVICE_TYPE << 8,
-					 0, /* interface */
-					 report,
-					 hid_desc->wDescriptorLength,
-					 5000); /* 5 secs */
-
-		if (result == hid_desc->wDescriptorLength)
-			break;
-	}
-
-	/* If we didn't get the report, fail */
-	dbg("usb_control_msg result: :%d", result);
-	if (result != hid_desc->wDescriptorLength) {
-		err("Failed to get HID Report Descriptor of size: %d",
-		    hid_desc->wDescriptorLength);
-		error = -EIO;
-		goto err_free_urb;
-	}
-
-	/* Now we parse the report */
-	parse_hid_report_descriptor(gtco, report, result);
-
-	/* Now we delete it */
-	kfree(report);
-
-	/* Create a device file node */
-	usb_make_path(gtco->usbdev, gtco->usbpath, sizeof(gtco->usbpath));
-	strlcat(gtco->usbpath, "/input0", sizeof(gtco->usbpath));
-
-	/* Set Input device functions */
-	input_dev->open = gtco_input_open;
-	input_dev->close = gtco_input_close;
-
-	/* Set input device information */
-	input_dev->name = "GTCO_CalComp";
-	input_dev->phys = gtco->usbpath;
-
-	input_set_drvdata(input_dev, gtco);
-
-	/* Now set up all the input device capabilities */
-	gtco_setup_caps(input_dev);
-
-	/* Set input device required ID information */
-	usb_to_input_id(gtco->usbdev, &input_dev->id);
-	input_dev->dev.parent = &usbinterface->dev;
-
-	/* Setup the URB, it will be posted later on open of input device */
-	endpoint = &usbinterface->altsetting[0].endpoint[0].desc;
-
-	usb_fill_int_urb(gtco->urbinfo,
-			 gtco->usbdev,
-			 usb_rcvintpipe(gtco->usbdev,
-					endpoint->bEndpointAddress),
-			 gtco->buffer,
-			 REPORT_MAX_SIZE,
-			 gtco_urb_callback,
-			 gtco,
-			 endpoint->bInterval);
-
-	gtco->urbinfo->transfer_dma = gtco->buf_dma;
-	gtco->urbinfo->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
-
-	/* Save gtco pointer in USB interface gtco */
-	usb_set_intfdata(usbinterface, gtco);
-
-	/* All done, now register the input device */
-	error = input_register_device(input_dev);
-	if (error)
-		goto err_free_urb;
-
-	return 0;
-
- err_free_urb:
-	usb_free_urb(gtco->urbinfo);
- err_free_buf:
-	usb_buffer_free(gtco->usbdev, REPORT_MAX_SIZE,
-			gtco->buffer, gtco->buf_dma);
- err_free_devs:
-	kfree(report);
-	input_free_device(input_dev);
-	kfree(gtco);
-	return error;
-}
-
-/*
- *  This function is a standard USB function called when the USB device
- *  is disconnected.  We will get rid of the URV, de-register the input
- *  device, and free up allocated memory
- */
-static void gtco_disconnect(struct usb_interface *interface)
-{
-	/* Grab private device ptr */
-	struct gtco *gtco = usb_get_intfdata(interface);
-
-	/* Now reverse all the registration stuff */
-	if (gtco) {
-		input_unregister_device(gtco->inputdevice);
-		usb_kill_urb(gtco->urbinfo);
-		usb_free_urb(gtco->urbinfo);
-		usb_buffer_free(gtco->usbdev, REPORT_MAX_SIZE,
-				gtco->buffer, gtco->buf_dma);
-		kfree(gtco);
-	}
-
-	info("gtco driver disconnected");
-}
-
-/*   STANDARD MODULE LOAD ROUTINES  */
-
-static struct usb_driver gtco_driverinfo_table = {
-	.name		= "gtco",
-	.id_table	= gtco_usbid_table,
-	.probe		= gtco_probe,
-	.disconnect	= gtco_disconnect,
-};
-
-/*
- *  Register this module with the USB subsystem
- */
-static int __init gtco_init(void)
-{
-	int error;
-
-	error = usb_register(&gtco_driverinfo_table);
-	if (error) {
-		err("usb_register() failed rc=0x%x", error);
-		return error;
-	}
-
-	printk("GTCO usb driver version: %s", GTCO_VERSION);
-	return 0;
-}
-
-/*
- *   Deregister this module with the USB subsystem
- */
-static void __exit gtco_exit(void)
-{
-	usb_deregister(&gtco_driverinfo_table);
-}
-
-module_init(gtco_init);
-module_exit(gtco_exit);
-
-MODULE_LICENSE("GPL");
diff --git a/drivers/usb/input/kbtab.c b/drivers/usb/input/kbtab.c
deleted file mode 100644
index 91e6d00d4a43..000000000000
--- a/drivers/usb/input/kbtab.c
+++ /dev/null
@@ -1,226 +0,0 @@
-#include <linux/kernel.h>
-#include <linux/slab.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/usb/input.h>
-#include <asm/unaligned.h>
-
-/*
- * Version Information
- * v0.0.1 - Original, extremely basic version, 2.4.xx only
- * v0.0.2 - Updated, works with 2.5.62 and 2.4.20;
- *           - added pressure-threshold modules param code from
- *              Alex Perry <alex.perry@ieee.org>
- */
-
-#define DRIVER_VERSION "v0.0.2"
-#define DRIVER_AUTHOR "Josh Myer <josh@joshisanerd.com>"
-#define DRIVER_DESC "USB KB Gear JamStudio Tablet driver"
-#define DRIVER_LICENSE "GPL"
-
-MODULE_AUTHOR(DRIVER_AUTHOR);
-MODULE_DESCRIPTION(DRIVER_DESC);
-MODULE_LICENSE(DRIVER_LICENSE);
-
-#define USB_VENDOR_ID_KBGEAR	0x084e
-
-static int kb_pressure_click = 0x10;
-module_param(kb_pressure_click, int, 0);
-MODULE_PARM_DESC(kb_pressure_click, "pressure threshold for clicks");
-
-struct kbtab {
-	unsigned char *data;
-	dma_addr_t data_dma;
-	struct input_dev *dev;
-	struct usb_device *usbdev;
-	struct urb *irq;
-	int x, y;
-	int button;
-	int pressure;
-	__u32 serial[2];
-	char phys[32];
-};
-
-static void kbtab_irq(struct urb *urb)
-{
-	struct kbtab *kbtab = urb->context;
-	unsigned char *data = kbtab->data;
-	struct input_dev *dev = kbtab->dev;
-	int retval;
-
-	switch (urb->status) {
-	case 0:
-		/* success */
-		break;
-	case -ECONNRESET:
-	case -ENOENT:
-	case -ESHUTDOWN:
-		/* this urb is terminated, clean up */
-		dbg("%s - urb shutting down with status: %d", __FUNCTION__, urb->status);
-		return;
-	default:
-		dbg("%s - nonzero urb status received: %d", __FUNCTION__, urb->status);
-		goto exit;
-	}
-
-	kbtab->x = le16_to_cpu(get_unaligned((__le16 *) &data[1]));
-	kbtab->y = le16_to_cpu(get_unaligned((__le16 *) &data[3]));
-
-	kbtab->pressure = (data[5]);
-
-	input_report_key(dev, BTN_TOOL_PEN, 1);
-
-	input_report_abs(dev, ABS_X, kbtab->x);
-	input_report_abs(dev, ABS_Y, kbtab->y);
-
-	/*input_report_key(dev, BTN_TOUCH , data[0] & 0x01);*/
-	input_report_key(dev, BTN_RIGHT, data[0] & 0x02);
-
-	if (-1 == kb_pressure_click) {
-		input_report_abs(dev, ABS_PRESSURE, kbtab->pressure);
-	} else {
-		input_report_key(dev, BTN_LEFT, (kbtab->pressure > kb_pressure_click) ? 1 : 0);
-	};
-
-	input_sync(dev);
-
- exit:
-	retval = usb_submit_urb (urb, GFP_ATOMIC);
-	if (retval)
-		err ("%s - usb_submit_urb failed with result %d",
-		     __FUNCTION__, retval);
-}
-
-static struct usb_device_id kbtab_ids[] = {
-	{ USB_DEVICE(USB_VENDOR_ID_KBGEAR, 0x1001), .driver_info = 0 },
-	{ }
-};
-
-MODULE_DEVICE_TABLE(usb, kbtab_ids);
-
-static int kbtab_open(struct input_dev *dev)
-{
-	struct kbtab *kbtab = input_get_drvdata(dev);
-
-	kbtab->irq->dev = kbtab->usbdev;
-	if (usb_submit_urb(kbtab->irq, GFP_KERNEL))
-		return -EIO;
-
-	return 0;
-}
-
-static void kbtab_close(struct input_dev *dev)
-{
-	struct kbtab *kbtab = input_get_drvdata(dev);
-
-	usb_kill_urb(kbtab->irq);
-}
-
-static int kbtab_probe(struct usb_interface *intf, const struct usb_device_id *id)
-{
-	struct usb_device *dev = interface_to_usbdev(intf);
-	struct usb_endpoint_descriptor *endpoint;
-	struct kbtab *kbtab;
-	struct input_dev *input_dev;
-	int error = -ENOMEM;
-
-	kbtab = kzalloc(sizeof(struct kbtab), GFP_KERNEL);
-	input_dev = input_allocate_device();
-	if (!kbtab || !input_dev)
-		goto fail1;
-
-	kbtab->data = usb_buffer_alloc(dev, 8, GFP_KERNEL, &kbtab->data_dma);
-	if (!kbtab->data)
-		goto fail1;
-
-	kbtab->irq = usb_alloc_urb(0, GFP_KERNEL);
-	if (!kbtab->irq)
-		goto fail2;
-
-	kbtab->usbdev = dev;
-	kbtab->dev = input_dev;
-
-	usb_make_path(dev, kbtab->phys, sizeof(kbtab->phys));
-	strlcat(kbtab->phys, "/input0", sizeof(kbtab->phys));
-
-	input_dev->name = "KB Gear Tablet";
-	input_dev->phys = kbtab->phys;
-	usb_to_input_id(dev, &input_dev->id);
-	input_dev->dev.parent = &intf->dev;
-
-	input_set_drvdata(input_dev, kbtab);
-
-	input_dev->open = kbtab_open;
-	input_dev->close = kbtab_close;
-
-	input_dev->evbit[0] |= BIT(EV_KEY) | BIT(EV_ABS) | BIT(EV_MSC);
-	input_dev->keybit[LONG(BTN_LEFT)] |= BIT(BTN_LEFT) | BIT(BTN_RIGHT) | BIT(BTN_MIDDLE);
-	input_dev->keybit[LONG(BTN_DIGI)] |= BIT(BTN_TOOL_PEN) | BIT(BTN_TOUCH);
-	input_dev->mscbit[0] |= BIT(MSC_SERIAL);
-	input_set_abs_params(input_dev, ABS_X, 0, 0x2000, 4, 0);
-	input_set_abs_params(input_dev, ABS_Y, 0, 0x1750, 4, 0);
-	input_set_abs_params(input_dev, ABS_PRESSURE, 0, 0xff, 0, 0);
-
-	endpoint = &intf->cur_altsetting->endpoint[0].desc;
-
-	usb_fill_int_urb(kbtab->irq, dev,
-			 usb_rcvintpipe(dev, endpoint->bEndpointAddress),
-			 kbtab->data, 8,
-			 kbtab_irq, kbtab, endpoint->bInterval);
-	kbtab->irq->transfer_dma = kbtab->data_dma;
-	kbtab->irq->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
-
-	error = input_register_device(kbtab->dev);
-	if (error)
-		goto fail3;
-
-	usb_set_intfdata(intf, kbtab);
-
-	return 0;
-
- fail3:	usb_free_urb(kbtab->irq);
- fail2:	usb_buffer_free(dev, 10, kbtab->data, kbtab->data_dma);
- fail1:	input_free_device(input_dev);
-	kfree(kbtab);
-	return error;
-}
-
-static void kbtab_disconnect(struct usb_interface *intf)
-{
-	struct kbtab *kbtab = usb_get_intfdata(intf);
-
-	usb_set_intfdata(intf, NULL);
-	if (kbtab) {
-		usb_kill_urb(kbtab->irq);
-		input_unregister_device(kbtab->dev);
-		usb_free_urb(kbtab->irq);
-		usb_buffer_free(interface_to_usbdev(intf), 10, kbtab->data, kbtab->data_dma);
-		kfree(kbtab);
-	}
-}
-
-static struct usb_driver kbtab_driver = {
-	.name =		"kbtab",
-	.probe =	kbtab_probe,
-	.disconnect =	kbtab_disconnect,
-	.id_table =	kbtab_ids,
-};
-
-static int __init kbtab_init(void)
-{
-	int retval;
-	retval = usb_register(&kbtab_driver);
-	if (retval)
-		goto out;
-	info(DRIVER_VERSION ":" DRIVER_DESC);
-out:
-	return retval;
-}
-
-static void __exit kbtab_exit(void)
-{
-	usb_deregister(&kbtab_driver);
-}
-
-module_init(kbtab_init);
-module_exit(kbtab_exit);
diff --git a/drivers/usb/input/wacom.h b/drivers/usb/input/wacom.h
deleted file mode 100644
index d85abfc5ab58..000000000000
--- a/drivers/usb/input/wacom.h
+++ /dev/null
@@ -1,131 +0,0 @@
-/*
- * drivers/usb/input/wacom.h
- *
- *  USB Wacom Graphire and Wacom Intuos tablet support
- *
- *  Copyright (c) 2000-2004 Vojtech Pavlik	<vojtech@ucw.cz>
- *  Copyright (c) 2000 Andreas Bach Aaen	<abach@stofanet.dk>
- *  Copyright (c) 2000 Clifford Wolf		<clifford@clifford.at>
- *  Copyright (c) 2000 Sam Mosel		<sam.mosel@computer.org>
- *  Copyright (c) 2000 James E. Blair		<corvus@gnu.org>
- *  Copyright (c) 2000 Daniel Egger		<egger@suse.de>
- *  Copyright (c) 2001 Frederic Lepied		<flepied@mandrakesoft.com>
- *  Copyright (c) 2004 Panagiotis Issaris	<panagiotis.issaris@mech.kuleuven.ac.be>
- *  Copyright (c) 2002-2006 Ping Cheng		<pingc@wacom.com>
- *
- *  ChangeLog:
- *      v0.1 (vp)  - Initial release
- *      v0.2 (aba) - Support for all buttons / combinations
- *      v0.3 (vp)  - Support for Intuos added
- *	v0.4 (sm)  - Support for more Intuos models, menustrip
- *			relative mode, proximity.
- *	v0.5 (vp)  - Big cleanup, nifty features removed,
- *			they belong in userspace
- *	v1.8 (vp)  - Submit URB only when operating, moved to CVS,
- *			use input_report_key instead of report_btn and
- *			other cleanups
- *	v1.11 (vp) - Add URB ->dev setting for new kernels
- *	v1.11 (jb) - Add support for the 4D Mouse & Lens
- *	v1.12 (de) - Add support for two more inking pen IDs
- *	v1.14 (vp) - Use new USB device id probing scheme.
- *		     Fix Wacom Graphire mouse wheel
- *	v1.18 (vp) - Fix mouse wheel direction
- *		     Make mouse relative
- *      v1.20 (fl) - Report tool id for Intuos devices
- *                 - Multi tools support
- *                 - Corrected Intuos protocol decoding (airbrush, 4D mouse, lens cursor...)
- *                 - Add PL models support
- *		   - Fix Wacom Graphire mouse wheel again
- *	v1.21 (vp) - Removed protocol descriptions
- *		   - Added MISC_SERIAL for tool serial numbers
- *	      (gb) - Identify version on module load.
- *    v1.21.1 (fl) - added Graphire2 support
- *    v1.21.2 (fl) - added Intuos2 support
- *                 - added all the PL ids
- *    v1.21.3 (fl) - added another eraser id from Neil Okamoto
- *                 - added smooth filter for Graphire from Peri Hankey
- *                 - added PenPartner support from Olaf van Es
- *                 - new tool ids from Ole Martin Bjoerndalen
- *	v1.29 (pc) - Add support for more tablets
- *		   - Fix pressure reporting
- *	v1.30 (vp) - Merge 2.4 and 2.5 drivers
- *		   - Since 2.5 now has input_sync(), remove MSC_SERIAL abuse
- *		   - Cleanups here and there
- *    v1.30.1 (pi) - Added Graphire3 support
- *	v1.40 (pc) - Add support for several new devices, fix eraser reporting, ...
- *	v1.43 (pc) - Added support for Cintiq 21UX
- *		   - Fixed a Graphire bug
- *		   - Merged wacom_intuos3_irq into wacom_intuos_irq
- *	v1.44 (pc) - Added support for Graphire4, Cintiq 710, Intuos3 6x11, etc.
- *		   - Report Device IDs
- *      v1.45 (pc) - Added support for DTF 521, Intuos3 12x12 and 12x19
- *                 - Minor data report fix
- *      v1.46 (pc) - Split wacom.c into wacom_sys.c and wacom_wac.c,
- *		   - where wacom_sys.c deals with system specific code,
- * 		   - and wacom_wac.c deals with Wacom specific code
- *		   - Support Intuos3 4x6
- */
-
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-#ifndef WACOM_H
-#define WACOM_H
-#include <linux/kernel.h>
-#include <linux/slab.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/usb/input.h>
-#include <asm/unaligned.h>
-
-/*
- * Version Information
- */
-#define DRIVER_VERSION "v1.46"
-#define DRIVER_AUTHOR "Vojtech Pavlik <vojtech@ucw.cz>"
-#define DRIVER_DESC "USB Wacom Graphire and Wacom Intuos tablet driver"
-#define DRIVER_LICENSE "GPL"
-
-MODULE_AUTHOR(DRIVER_AUTHOR);
-MODULE_DESCRIPTION(DRIVER_DESC);
-MODULE_LICENSE(DRIVER_LICENSE);
-
-#define USB_VENDOR_ID_WACOM	0x056a
-
-struct wacom {
-	dma_addr_t data_dma;
-	struct input_dev *dev;
-	struct usb_device *usbdev;
-	struct urb *irq;
-	struct wacom_wac * wacom_wac;
-	char phys[32];
-};
-
-struct wacom_combo {
-	struct wacom * wacom;
-	struct urb * urb;
-};
-
-extern int wacom_wac_irq(struct wacom_wac * wacom_wac, void * wcombo);
-extern void wacom_report_abs(void *wcombo, unsigned int abs_type, int abs_data);
-extern void wacom_report_rel(void *wcombo, unsigned int rel_type, int rel_data);
-extern void wacom_report_key(void *wcombo, unsigned int key_type, int key_data);
-extern void wacom_input_event(void *wcombo, unsigned int type, unsigned int code, int value);
-extern void wacom_input_sync(void *wcombo);
-extern void wacom_init_input_dev(struct input_dev *input_dev, struct wacom_wac *wacom_wac);
-extern void input_dev_g4(struct input_dev *input_dev, struct wacom_wac *wacom_wac);
-extern void input_dev_g(struct input_dev *input_dev, struct wacom_wac *wacom_wac);
-extern void input_dev_i3s(struct input_dev *input_dev, struct wacom_wac *wacom_wac);
-extern void input_dev_i3(struct input_dev *input_dev, struct wacom_wac *wacom_wac);
-extern void input_dev_i(struct input_dev *input_dev, struct wacom_wac *wacom_wac);
-extern void input_dev_pl(struct input_dev *input_dev, struct wacom_wac *wacom_wac);
-extern void input_dev_pt(struct input_dev *input_dev, struct wacom_wac *wacom_wac);
-extern __u16 wacom_le16_to_cpu(unsigned char *data);
-extern __u16 wacom_be16_to_cpu(unsigned char *data);
-extern struct wacom_features * get_wacom_feature(const struct usb_device_id *id);
-extern const struct usb_device_id * get_device_table(void);
-
-#endif
diff --git a/drivers/usb/input/wacom_sys.c b/drivers/usb/input/wacom_sys.c
deleted file mode 100644
index 1fe48208c2f4..000000000000
--- a/drivers/usb/input/wacom_sys.c
+++ /dev/null
@@ -1,318 +0,0 @@
-/*
- * drivers/usb/input/wacom_sys.c
- *
- *  USB Wacom Graphire and Wacom Intuos tablet support - system specific code
- */
-
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include "wacom.h"
-#include "wacom_wac.h"
-
-#define USB_REQ_GET_REPORT	0x01
-#define USB_REQ_SET_REPORT	0x09
-
-static int usb_get_report(struct usb_interface *intf, unsigned char type,
-				unsigned char id, void *buf, int size)
-{
-	return usb_control_msg(interface_to_usbdev(intf),
-		usb_rcvctrlpipe(interface_to_usbdev(intf), 0),
-		USB_REQ_GET_REPORT, USB_TYPE_CLASS | USB_RECIP_INTERFACE,
-		(type << 8) + id, intf->altsetting[0].desc.bInterfaceNumber,
-		buf, size, 100);
-}
-
-static int usb_set_report(struct usb_interface *intf, unsigned char type,
-				unsigned char id, void *buf, int size)
-{
-	return usb_control_msg(interface_to_usbdev(intf),
-		usb_sndctrlpipe(interface_to_usbdev(intf), 0),
-                USB_REQ_SET_REPORT, USB_TYPE_CLASS | USB_RECIP_INTERFACE,
-                (type << 8) + id, intf->altsetting[0].desc.bInterfaceNumber,
-		buf, size, 1000);
-}
-
-static struct input_dev * get_input_dev(struct wacom_combo *wcombo)
-{
-	return wcombo->wacom->dev;
-}
-
-static void wacom_sys_irq(struct urb *urb)
-{
-	struct wacom *wacom = urb->context;
-	struct wacom_combo wcombo;
-	int retval;
-
-	switch (urb->status) {
-	case 0:
-		/* success */
-		break;
-	case -ECONNRESET:
-	case -ENOENT:
-	case -ESHUTDOWN:
-		/* this urb is terminated, clean up */
-		dbg("%s - urb shutting down with status: %d", __FUNCTION__, urb->status);
-		return;
-	default:
-		dbg("%s - nonzero urb status received: %d", __FUNCTION__, urb->status);
-		goto exit;
-	}
-
-	wcombo.wacom = wacom;
-	wcombo.urb = urb;
-
-	if (wacom_wac_irq(wacom->wacom_wac, (void *)&wcombo))
-		input_sync(get_input_dev(&wcombo));
-
- exit:
-	retval = usb_submit_urb (urb, GFP_ATOMIC);
-	if (retval)
-		err ("%s - usb_submit_urb failed with result %d",
-		     __FUNCTION__, retval);
-}
-
-void wacom_report_key(void *wcombo, unsigned int key_type, int key_data)
-{
-	input_report_key(get_input_dev((struct wacom_combo *)wcombo), key_type, key_data);
-	return;
-}
-
-void wacom_report_abs(void *wcombo, unsigned int abs_type, int abs_data)
-{
-	input_report_abs(get_input_dev((struct wacom_combo *)wcombo), abs_type, abs_data);
-	return;
-}
-
-void wacom_report_rel(void *wcombo, unsigned int rel_type, int rel_data)
-{
-	input_report_rel(get_input_dev((struct wacom_combo *)wcombo), rel_type, rel_data);
-	return;
-}
-
-void wacom_input_event(void *wcombo, unsigned int type, unsigned int code, int value)
-{
-	input_event(get_input_dev((struct wacom_combo *)wcombo), type, code, value);
-	return;
-}
-
-__u16 wacom_be16_to_cpu(unsigned char *data)
-{
-	__u16 value;
-	value = be16_to_cpu(*(__be16 *) data);
-	return value;
-}
-
-__u16 wacom_le16_to_cpu(unsigned char *data)
-{
-	__u16 value;
-	value = le16_to_cpu(*(__le16 *) data);
-	return value;
-}
-
-void wacom_input_sync(void *wcombo)
-{
-	input_sync(get_input_dev((struct wacom_combo *)wcombo));
-	return;
-}
-
-static int wacom_open(struct input_dev *dev)
-{
-	struct wacom *wacom = input_get_drvdata(dev);
-
-	wacom->irq->dev = wacom->usbdev;
-	if (usb_submit_urb(wacom->irq, GFP_KERNEL))
-		return -EIO;
-
-	return 0;
-}
-
-static void wacom_close(struct input_dev *dev)
-{
-	struct wacom *wacom = input_get_drvdata(dev);
-
-	usb_kill_urb(wacom->irq);
-}
-
-void input_dev_g4(struct input_dev *input_dev, struct wacom_wac *wacom_wac)
-{
-	input_dev->evbit[0] |= BIT(EV_MSC);
-	input_dev->mscbit[0] |= BIT(MSC_SERIAL);
-	input_dev->keybit[LONG(BTN_DIGI)] |= BIT(BTN_TOOL_FINGER);
-	input_dev->keybit[LONG(BTN_LEFT)] |= BIT(BTN_0) | BIT(BTN_4);
-}
-
-void input_dev_g(struct input_dev *input_dev, struct wacom_wac *wacom_wac)
-{
-	input_dev->evbit[0] |= BIT(EV_REL);
-	input_dev->relbit[0] |= BIT(REL_WHEEL);
-	input_dev->keybit[LONG(BTN_LEFT)] |= BIT(BTN_LEFT) | BIT(BTN_RIGHT) | BIT(BTN_MIDDLE);
-	input_dev->keybit[LONG(BTN_DIGI)] |= BIT(BTN_TOOL_RUBBER) | BIT(BTN_TOOL_MOUSE) | BIT(BTN_STYLUS2);
-	input_set_abs_params(input_dev, ABS_DISTANCE, 0, wacom_wac->features->distance_max, 0, 0);
-}
-
-void input_dev_i3s(struct input_dev *input_dev, struct wacom_wac *wacom_wac)
-{
-	input_dev->keybit[LONG(BTN_DIGI)] |= BIT(BTN_TOOL_FINGER);
-	input_dev->keybit[LONG(BTN_LEFT)] |= BIT(BTN_0) | BIT(BTN_1) | BIT(BTN_2) | BIT(BTN_3);
-	input_set_abs_params(input_dev, ABS_RX, 0, 4096, 0, 0);
-}
-
-void input_dev_i3(struct input_dev *input_dev, struct wacom_wac *wacom_wac)
-{
-	input_dev->keybit[LONG(BTN_LEFT)] |= BIT(BTN_4) | BIT(BTN_5) | BIT(BTN_6) | BIT(BTN_7);
-	input_set_abs_params(input_dev, ABS_RY, 0, 4096, 0, 0);
-}
-
-void input_dev_i(struct input_dev *input_dev, struct wacom_wac *wacom_wac)
-{
-	input_dev->evbit[0] |= BIT(EV_MSC) | BIT(EV_REL);
-	input_dev->mscbit[0] |= BIT(MSC_SERIAL);
-	input_dev->relbit[0] |= BIT(REL_WHEEL);
-	input_dev->keybit[LONG(BTN_LEFT)] |= BIT(BTN_LEFT) | BIT(BTN_RIGHT) | BIT(BTN_MIDDLE) | BIT(BTN_SIDE) | BIT(BTN_EXTRA);
-	input_dev->keybit[LONG(BTN_DIGI)] |= BIT(BTN_TOOL_RUBBER) | BIT(BTN_TOOL_MOUSE)	| BIT(BTN_TOOL_BRUSH)
-		| BIT(BTN_TOOL_PENCIL) | BIT(BTN_TOOL_AIRBRUSH) | BIT(BTN_TOOL_LENS) | BIT(BTN_STYLUS2);
-	input_set_abs_params(input_dev, ABS_DISTANCE, 0, wacom_wac->features->distance_max, 0, 0);
-	input_set_abs_params(input_dev, ABS_WHEEL, 0, 1023, 0, 0);
-	input_set_abs_params(input_dev, ABS_TILT_X, 0, 127, 0, 0);
-	input_set_abs_params(input_dev, ABS_TILT_Y, 0, 127, 0, 0);
-	input_set_abs_params(input_dev, ABS_RZ, -900, 899, 0, 0);
-	input_set_abs_params(input_dev, ABS_THROTTLE, -1023, 1023, 0, 0);
-}
-
-void input_dev_pl(struct input_dev *input_dev, struct wacom_wac *wacom_wac)
-{
-	input_dev->keybit[LONG(BTN_DIGI)] |= BIT(BTN_STYLUS2) | BIT(BTN_TOOL_RUBBER);
-}
-
-void input_dev_pt(struct input_dev *input_dev, struct wacom_wac *wacom_wac)
-{
-	input_dev->keybit[LONG(BTN_DIGI)] |= BIT(BTN_TOOL_RUBBER);
-}
-
-static int wacom_probe(struct usb_interface *intf, const struct usb_device_id *id)
-{
-	struct usb_device *dev = interface_to_usbdev(intf);
-	struct usb_endpoint_descriptor *endpoint;
-	struct wacom *wacom;
-	struct wacom_wac *wacom_wac;
-	struct input_dev *input_dev;
-	int error = -ENOMEM;
-	char rep_data[2], limit = 0;
-
-	wacom = kzalloc(sizeof(struct wacom), GFP_KERNEL);
-	wacom_wac = kzalloc(sizeof(struct wacom_wac), GFP_KERNEL);
-	input_dev = input_allocate_device();
-	if (!wacom || !input_dev || !wacom_wac)
-		goto fail1;
-
-	wacom_wac->data = usb_buffer_alloc(dev, 10, GFP_KERNEL, &wacom->data_dma);
-	if (!wacom_wac->data)
-		goto fail1;
-
-	wacom->irq = usb_alloc_urb(0, GFP_KERNEL);
-	if (!wacom->irq)
-		goto fail2;
-
-	wacom->usbdev = dev;
-	wacom->dev = input_dev;
-	usb_make_path(dev, wacom->phys, sizeof(wacom->phys));
-	strlcat(wacom->phys, "/input0", sizeof(wacom->phys));
-
-	wacom_wac->features = get_wacom_feature(id);
-	BUG_ON(wacom_wac->features->pktlen > 10);
-
-	input_dev->name = wacom_wac->features->name;
-	wacom->wacom_wac = wacom_wac;
-	usb_to_input_id(dev, &input_dev->id);
-
-	input_dev->dev.parent = &intf->dev;
-
-	input_set_drvdata(input_dev, wacom);
-
-	input_dev->open = wacom_open;
-	input_dev->close = wacom_close;
-
-	input_dev->evbit[0] |= BIT(EV_KEY) | BIT(EV_ABS);
-	input_dev->keybit[LONG(BTN_DIGI)] |= BIT(BTN_TOOL_PEN) | BIT(BTN_TOUCH) | BIT(BTN_STYLUS);
-	input_set_abs_params(input_dev, ABS_X, 0, wacom_wac->features->x_max, 4, 0);
-	input_set_abs_params(input_dev, ABS_Y, 0, wacom_wac->features->y_max, 4, 0);
-	input_set_abs_params(input_dev, ABS_PRESSURE, 0, wacom_wac->features->pressure_max, 0, 0);
-	input_dev->absbit[LONG(ABS_MISC)] |= BIT(ABS_MISC);
-
-	wacom_init_input_dev(input_dev, wacom_wac);
-
-	endpoint = &intf->cur_altsetting->endpoint[0].desc;
-
-	usb_fill_int_urb(wacom->irq, dev,
-			 usb_rcvintpipe(dev, endpoint->bEndpointAddress),
-			 wacom_wac->data, wacom_wac->features->pktlen,
-			 wacom_sys_irq, wacom, endpoint->bInterval);
-	wacom->irq->transfer_dma = wacom->data_dma;
-	wacom->irq->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
-
-	error = input_register_device(wacom->dev);
-	if (error)
-		goto fail3;
-
-	/* Ask the tablet to report tablet data. Repeat until it succeeds */
-	do {
-		rep_data[0] = 2;
-		rep_data[1] = 2;
-		usb_set_report(intf, 3, 2, rep_data, 2);
-		usb_get_report(intf, 3, 2, rep_data, 2);
-	} while (rep_data[1] != 2 && limit++ < 5);
-
-	usb_set_intfdata(intf, wacom);
-	return 0;
-
- fail3:	usb_free_urb(wacom->irq);
- fail2:	usb_buffer_free(dev, 10, wacom_wac->data, wacom->data_dma);
- fail1:	input_free_device(input_dev);
-	kfree(wacom);
-	kfree(wacom_wac);
-	return error;
-}
-
-static void wacom_disconnect(struct usb_interface *intf)
-{
-	struct wacom *wacom = usb_get_intfdata (intf);
-
-	usb_set_intfdata(intf, NULL);
-	if (wacom) {
-		usb_kill_urb(wacom->irq);
-		input_unregister_device(wacom->dev);
-		usb_free_urb(wacom->irq);
-		usb_buffer_free(interface_to_usbdev(intf), 10, wacom->wacom_wac->data, wacom->data_dma);
-		kfree(wacom->wacom_wac);
-		kfree(wacom);
-	}
-}
-
-static struct usb_driver wacom_driver = {
-	.name =		"wacom",
-	.probe =	wacom_probe,
-	.disconnect =	wacom_disconnect,
-};
-
-static int __init wacom_init(void)
-{
-	int result;
-	wacom_driver.id_table = get_device_table();
-	result = usb_register(&wacom_driver);
-	if (result == 0)
-		info(DRIVER_VERSION ":" DRIVER_DESC);
-	return result;
-}
-
-static void __exit wacom_exit(void)
-{
-	usb_deregister(&wacom_driver);
-}
-
-module_init(wacom_init);
-module_exit(wacom_exit);
diff --git a/drivers/usb/input/wacom_wac.c b/drivers/usb/input/wacom_wac.c
deleted file mode 100644
index 4f3e9bc7177d..000000000000
--- a/drivers/usb/input/wacom_wac.c
+++ /dev/null
@@ -1,675 +0,0 @@
-/*
- * drivers/usb/input/wacom_wac.c
- *
- *  USB Wacom Graphire and Wacom Intuos tablet support - Wacom specific code
- *
- */
-
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-#include "wacom.h"
-#include "wacom_wac.h"
-
-static int wacom_penpartner_irq(struct wacom_wac *wacom, void *wcombo)
-{
-	unsigned char *data = wacom->data;
-
-	switch (data[0]) {
-		case 1:
-			if (data[5] & 0x80) {
-				wacom->tool[0] = (data[5] & 0x20) ? BTN_TOOL_RUBBER : BTN_TOOL_PEN;
-				wacom->id[0] = (data[5] & 0x20) ? ERASER_DEVICE_ID : STYLUS_DEVICE_ID;
-				wacom_report_key(wcombo, wacom->tool[0], 1);
-				wacom_report_abs(wcombo, ABS_MISC, wacom->id[0]); /* report tool id */
-				wacom_report_abs(wcombo, ABS_X, wacom_le16_to_cpu(&data[1]));
-				wacom_report_abs(wcombo, ABS_Y, wacom_le16_to_cpu(&data[3]));
-				wacom_report_abs(wcombo, ABS_PRESSURE, (signed char)data[6] + 127);
-				wacom_report_key(wcombo, BTN_TOUCH, ((signed char)data[6] > -127));
-				wacom_report_key(wcombo, BTN_STYLUS, (data[5] & 0x40));
-			} else {
-				wacom_report_key(wcombo, wacom->tool[0], 0);
-				wacom_report_abs(wcombo, ABS_MISC, 0); /* report tool id */
-				wacom_report_abs(wcombo, ABS_PRESSURE, -1);
-				wacom_report_key(wcombo, BTN_TOUCH, 0);
-			}
-			break;
-		case 2:
-			wacom_report_key(wcombo, BTN_TOOL_PEN, 1);
-			wacom_report_abs(wcombo, ABS_MISC, STYLUS_DEVICE_ID); /* report tool id */
-			wacom_report_abs(wcombo, ABS_X, wacom_le16_to_cpu(&data[1]));
-			wacom_report_abs(wcombo, ABS_Y, wacom_le16_to_cpu(&data[3]));
-			wacom_report_abs(wcombo, ABS_PRESSURE, (signed char)data[6] + 127);
-			wacom_report_key(wcombo, BTN_TOUCH, ((signed char)data[6] > -80) && !(data[5] & 0x20));
-			wacom_report_key(wcombo, BTN_STYLUS, (data[5] & 0x40));
-			break;
-		default:
-			printk(KERN_INFO "wacom_penpartner_irq: received unknown report #%d\n", data[0]);
-			return 0;
-        }
-	return 1;
-}
-
-static int wacom_pl_irq(struct wacom_wac *wacom, void *wcombo)
-{
-	unsigned char *data = wacom->data;
-	int prox, id, pressure;
-
-	if (data[0] != 2) {
-		dbg("wacom_pl_irq: received unknown report #%d", data[0]);
-		return 0;
-	}
-
-	prox = data[1] & 0x40;
-
-	id = ERASER_DEVICE_ID;
-	if (prox) {
-
-		pressure = (signed char)((data[7] << 1) | ((data[4] >> 2) & 1));
-		if (wacom->features->pressure_max > 255)
-			pressure = (pressure << 1) | ((data[4] >> 6) & 1);
-		pressure += (wacom->features->pressure_max + 1) / 2;
-
-		/*
-		 * if going from out of proximity into proximity select between the eraser
-		 * and the pen based on the state of the stylus2 button, choose eraser if
-		 * pressed else choose pen. if not a proximity change from out to in, send
-		 * an out of proximity for previous tool then a in for new tool.
-		 */
-		if (!wacom->tool[0]) {
-			/* Eraser bit set for DTF */
-			if (data[1] & 0x10)
-				wacom->tool[1] = BTN_TOOL_RUBBER;
-			else
-				/* Going into proximity select tool */
-				wacom->tool[1] = (data[4] & 0x20) ? BTN_TOOL_RUBBER : BTN_TOOL_PEN;
-		} else {
-			/* was entered with stylus2 pressed */
-			if (wacom->tool[1] == BTN_TOOL_RUBBER && !(data[4] & 0x20)) {
-				/* report out proximity for previous tool */
-				wacom_report_key(wcombo, wacom->tool[1], 0);
-				wacom_input_sync(wcombo);
-				wacom->tool[1] = BTN_TOOL_PEN;
-				return 0;
-			}
-		}
-		if (wacom->tool[1] != BTN_TOOL_RUBBER) {
-			/* Unknown tool selected default to pen tool */
-			wacom->tool[1] = BTN_TOOL_PEN;
-			id = STYLUS_DEVICE_ID;
-		}
-		wacom_report_key(wcombo, wacom->tool[1], prox); /* report in proximity for tool */
-		wacom_report_abs(wcombo, ABS_MISC, id); /* report tool id */
-		wacom_report_abs(wcombo, ABS_X, data[3] | (data[2] << 7) | ((data[1] & 0x03) << 14));
-		wacom_report_abs(wcombo, ABS_Y, data[6] | (data[5] << 7) | ((data[4] & 0x03) << 14));
-		wacom_report_abs(wcombo, ABS_PRESSURE, pressure);
-
-		wacom_report_key(wcombo, BTN_TOUCH, data[4] & 0x08);
-		wacom_report_key(wcombo, BTN_STYLUS, data[4] & 0x10);
-		/* Only allow the stylus2 button to be reported for the pen tool. */
-		wacom_report_key(wcombo, BTN_STYLUS2, (wacom->tool[1] == BTN_TOOL_PEN) && (data[4] & 0x20));
-	} else {
-		/* report proximity-out of a (valid) tool */
-		if (wacom->tool[1] != BTN_TOOL_RUBBER) {
-			/* Unknown tool selected default to pen tool */
-			wacom->tool[1] = BTN_TOOL_PEN;
-		}
-		wacom_report_key(wcombo, wacom->tool[1], prox);
-	}
-
-	wacom->tool[0] = prox; /* Save proximity state */
-	return 1;
-}
-
-static int wacom_ptu_irq(struct wacom_wac *wacom, void *wcombo)
-{
-	unsigned char *data = wacom->data;
-	int id;
-
-	if (data[0] != 2) {
-		printk(KERN_INFO "wacom_ptu_irq: received unknown report #%d\n", data[0]);
-		return 0;
-	}
-
-	if (data[1] & 0x04) {
-		wacom_report_key(wcombo, BTN_TOOL_RUBBER, data[1] & 0x20);
-		wacom_report_key(wcombo, BTN_TOUCH, data[1] & 0x08);
-		id = ERASER_DEVICE_ID;
-	} else {
-		wacom_report_key(wcombo, BTN_TOOL_PEN, data[1] & 0x20);
-		wacom_report_key(wcombo, BTN_TOUCH, data[1] & 0x01);
-		id = STYLUS_DEVICE_ID;
-	}
-	wacom_report_abs(wcombo, ABS_MISC, id); /* report tool id */
-	wacom_report_abs(wcombo, ABS_X, wacom_le16_to_cpu(&data[2]));
-	wacom_report_abs(wcombo, ABS_Y, wacom_le16_to_cpu(&data[4]));
-	wacom_report_abs(wcombo, ABS_PRESSURE, wacom_le16_to_cpu(&data[6]));
-	wacom_report_key(wcombo, BTN_STYLUS, data[1] & 0x02);
-	wacom_report_key(wcombo, BTN_STYLUS2, data[1] & 0x10);
-	return 1;
-}
-
-static int wacom_graphire_irq(struct wacom_wac *wacom, void *wcombo)
-{
-	unsigned char *data = wacom->data;
-	int x, y, id, rw;
-
-	if (data[0] != 2) {
-		dbg("wacom_graphire_irq: received unknown report #%d", data[0]);
-		return 0;
-	}
-
-	id = STYLUS_DEVICE_ID;
-	if (data[1] & 0x80) { /* in prox */
-
-		switch ((data[1] >> 5) & 3) {
-
-			case 0:	/* Pen */
-				wacom->tool[0] = BTN_TOOL_PEN;
-				break;
-
-			case 1: /* Rubber */
-				wacom->tool[0] = BTN_TOOL_RUBBER;
-				id = ERASER_DEVICE_ID;
-				break;
-
-			case 2: /* Mouse with wheel */
-				wacom_report_key(wcombo, BTN_MIDDLE, data[1] & 0x04);
-				if (wacom->features->type == WACOM_G4) {
-					rw = data[7] & 0x04 ? (data[7] & 0x03)-4 : (data[7] & 0x03);
-					wacom_report_rel(wcombo, REL_WHEEL, -rw);
-				} else
-					wacom_report_rel(wcombo, REL_WHEEL, -(signed char) data[6]);
-				/* fall through */
-
-			case 3: /* Mouse without wheel */
-				wacom->tool[0] = BTN_TOOL_MOUSE;
-				id = CURSOR_DEVICE_ID;
-				wacom_report_key(wcombo, BTN_LEFT, data[1] & 0x01);
-				wacom_report_key(wcombo, BTN_RIGHT, data[1] & 0x02);
-				if (wacom->features->type == WACOM_G4)
-					wacom_report_abs(wcombo, ABS_DISTANCE, data[6] & 0x3f);
-				else
-					wacom_report_abs(wcombo, ABS_DISTANCE, data[7] & 0x3f);
-				break;
-		}
-		x = wacom_le16_to_cpu(&data[2]);
-		y = wacom_le16_to_cpu(&data[4]);
-		wacom_report_abs(wcombo, ABS_X, x);
-		wacom_report_abs(wcombo, ABS_Y, y);
-		if (wacom->tool[0] != BTN_TOOL_MOUSE) {
-			wacom_report_abs(wcombo, ABS_PRESSURE, data[6] | ((data[7] & 0x01) << 8));
-			wacom_report_key(wcombo, BTN_TOUCH, data[1] & 0x01);
-			wacom_report_key(wcombo, BTN_STYLUS, data[1] & 0x02);
-			wacom_report_key(wcombo, BTN_STYLUS2, data[1] & 0x04);
-		}
-		wacom_report_abs(wcombo, ABS_MISC, id); /* report tool id */
-		wacom_report_key(wcombo, wacom->tool[0], 1);
-	} else if (!(data[1] & 0x90)) {
-		wacom_report_abs(wcombo, ABS_X, 0);
-		wacom_report_abs(wcombo, ABS_Y, 0);
-		if (wacom->tool[0] == BTN_TOOL_MOUSE) {
-			wacom_report_key(wcombo, BTN_LEFT, 0);
-			wacom_report_key(wcombo, BTN_RIGHT, 0);
-			wacom_report_abs(wcombo, ABS_DISTANCE, 0);
-		} else {
-			wacom_report_abs(wcombo, ABS_PRESSURE, 0);
-			wacom_report_key(wcombo, BTN_TOUCH, 0);
-			wacom_report_key(wcombo, BTN_STYLUS, 0);
-			wacom_report_key(wcombo, BTN_STYLUS2, 0);
-		}
-		wacom_report_abs(wcombo, ABS_MISC, 0); /* reset tool id */
-		wacom_report_key(wcombo, wacom->tool[0], 0);
-	}
-
-	/* send pad data */
-	if (wacom->features->type == WACOM_G4) {
-		if (data[7] & 0xf8) {
-			wacom_input_sync(wcombo); /* sync last event */
-			wacom->id[1] = 1;
-			wacom->serial[1] = (data[7] & 0xf8);
-			wacom_report_key(wcombo, BTN_0, (data[7] & 0x40));
-			wacom_report_key(wcombo, BTN_4, (data[7] & 0x80));
-			rw = ((data[7] & 0x18) >> 3) - ((data[7] & 0x20) >> 3);
-			wacom_report_rel(wcombo, REL_WHEEL, rw);
-			wacom_report_key(wcombo, BTN_TOOL_FINGER, 0xf0);
-			wacom_report_abs(wcombo, ABS_MISC, PAD_DEVICE_ID);
-			wacom_input_event(wcombo, EV_MSC, MSC_SERIAL, 0xf0);
-		} else if (wacom->id[1]) {
-			wacom_input_sync(wcombo); /* sync last event */
-			wacom->id[1] = 0;
-			wacom_report_key(wcombo, BTN_0, (data[7] & 0x40));
-			wacom_report_key(wcombo, BTN_4, (data[7] & 0x80));
-			wacom_report_key(wcombo, BTN_TOOL_FINGER, 0);
-			wacom_report_abs(wcombo, ABS_MISC, 0);
-			wacom_input_event(wcombo, EV_MSC, MSC_SERIAL, 0xf0);
-		}
-	}
-	return 1;
-}
-
-static int wacom_intuos_inout(struct wacom_wac *wacom, void *wcombo)
-{
-	unsigned char *data = wacom->data;
-	int idx;
-
-	/* tool number */
-	idx = data[1] & 0x01;
-
-	/* Enter report */
-	if ((data[1] & 0xfc) == 0xc0) {
-		/* serial number of the tool */
-		wacom->serial[idx] = ((data[3] & 0x0f) << 28) +
-			(data[4] << 20) + (data[5] << 12) +
-			(data[6] << 4) + (data[7] >> 4);
-
-		wacom->id[idx] = (data[2] << 4) | (data[3] >> 4);
-		switch (wacom->id[idx]) {
-			case 0x812: /* Inking pen */
-			case 0x801: /* Intuos3 Inking pen */
-			case 0x012:
-				wacom->tool[idx] = BTN_TOOL_PENCIL;
-				break;
-			case 0x822: /* Pen */
-			case 0x842:
-			case 0x852:
-			case 0x823: /* Intuos3 Grip Pen */
-			case 0x813: /* Intuos3 Classic Pen */
-			case 0x885: /* Intuos3 Marker Pen */
-			case 0x022:
-				wacom->tool[idx] = BTN_TOOL_PEN;
-				break;
-			case 0x832: /* Stroke pen */
-			case 0x032:
-				wacom->tool[idx] = BTN_TOOL_BRUSH;
-				break;
-			case 0x007: /* Mouse 4D and 2D */
-		        case 0x09c:
-			case 0x094:
-			case 0x017: /* Intuos3 2D Mouse */
-				wacom->tool[idx] = BTN_TOOL_MOUSE;
-				break;
-			case 0x096: /* Lens cursor */
-			case 0x097: /* Intuos3 Lens cursor */
-				wacom->tool[idx] = BTN_TOOL_LENS;
-				break;
-			case 0x82a: /* Eraser */
-			case 0x85a:
-		        case 0x91a:
-			case 0xd1a:
-			case 0x0fa:
-			case 0x82b: /* Intuos3 Grip Pen Eraser */
-			case 0x81b: /* Intuos3 Classic Pen Eraser */
-			case 0x91b: /* Intuos3 Airbrush Eraser */
-				wacom->tool[idx] = BTN_TOOL_RUBBER;
-				break;
-			case 0xd12:
-			case 0x912:
-			case 0x112:
-			case 0x913: /* Intuos3 Airbrush */
-				wacom->tool[idx] = BTN_TOOL_AIRBRUSH;
-				break;
-			default: /* Unknown tool */
-				wacom->tool[idx] = BTN_TOOL_PEN;
-		}
-		return 1;
-	}
-
-	/* Exit report */
-	if ((data[1] & 0xfe) == 0x80) {
-		wacom_report_abs(wcombo, ABS_X, 0);
-		wacom_report_abs(wcombo, ABS_Y, 0);
-		wacom_report_abs(wcombo, ABS_DISTANCE, 0);
-		if (wacom->tool[idx] >= BTN_TOOL_MOUSE) {
-			wacom_report_key(wcombo, BTN_LEFT, 0);
-			wacom_report_key(wcombo, BTN_MIDDLE, 0);
-			wacom_report_key(wcombo, BTN_RIGHT, 0);
-			wacom_report_key(wcombo, BTN_SIDE, 0);
-			wacom_report_key(wcombo, BTN_EXTRA, 0);
-			wacom_report_abs(wcombo, ABS_THROTTLE, 0);
-			wacom_report_abs(wcombo, ABS_RZ, 0);
- 		} else {
-			wacom_report_abs(wcombo, ABS_PRESSURE, 0);
-			wacom_report_abs(wcombo, ABS_TILT_X, 0);
-			wacom_report_abs(wcombo, ABS_TILT_Y, 0);
-			wacom_report_key(wcombo, BTN_STYLUS, 0);
-			wacom_report_key(wcombo, BTN_STYLUS2, 0);
-			wacom_report_key(wcombo, BTN_TOUCH, 0);
-			wacom_report_abs(wcombo, ABS_WHEEL, 0);
-		}
-		wacom_report_key(wcombo, wacom->tool[idx], 0);
-		wacom_report_abs(wcombo, ABS_MISC, 0); /* reset tool id */
-		wacom_input_event(wcombo, EV_MSC, MSC_SERIAL, wacom->serial[idx]);
-		return 2;
-	}
-	return 0;
-}
-
-static void wacom_intuos_general(struct wacom_wac *wacom, void *wcombo)
-{
-	unsigned char *data = wacom->data;
-	unsigned int t;
-
-	/* general pen packet */
-	if ((data[1] & 0xb8) == 0xa0) {
-		t = (data[6] << 2) | ((data[7] >> 6) & 3);
-		wacom_report_abs(wcombo, ABS_PRESSURE, t);
-		wacom_report_abs(wcombo, ABS_TILT_X,
-				((data[7] << 1) & 0x7e) | (data[8] >> 7));
-		wacom_report_abs(wcombo, ABS_TILT_Y, data[8] & 0x7f);
-		wacom_report_key(wcombo, BTN_STYLUS, data[1] & 2);
-		wacom_report_key(wcombo, BTN_STYLUS2, data[1] & 4);
-		wacom_report_key(wcombo, BTN_TOUCH, t > 10);
-	}
-
-	/* airbrush second packet */
-	if ((data[1] & 0xbc) == 0xb4) {
-		wacom_report_abs(wcombo, ABS_WHEEL,
-				(data[6] << 2) | ((data[7] >> 6) & 3));
-		wacom_report_abs(wcombo, ABS_TILT_X,
-				((data[7] << 1) & 0x7e) | (data[8] >> 7));
-		wacom_report_abs(wcombo, ABS_TILT_Y, data[8] & 0x7f);
-	}
-	return;
-}
-
-static int wacom_intuos_irq(struct wacom_wac *wacom, void *wcombo)
-{
-	unsigned char *data = wacom->data;
-	unsigned int t;
-	int idx, result;
-
-	if (data[0] != 2 && data[0] != 5 && data[0] != 6 && data[0] != 12) {
-		dbg("wacom_intuos_irq: received unknown report #%d", data[0]);
-                return 0;
-	}
-
-	/* tool number */
-	idx = data[1] & 0x01;
-
-	/* pad packets. Works as a second tool and is always in prox */
-	if (data[0] == 12) {
-		/* initiate the pad as a device */
-		if (wacom->tool[1] != BTN_TOOL_FINGER)
-			wacom->tool[1] = BTN_TOOL_FINGER;
-
-		wacom_report_key(wcombo, BTN_0, (data[5] & 0x01));
-		wacom_report_key(wcombo, BTN_1, (data[5] & 0x02));
-		wacom_report_key(wcombo, BTN_2, (data[5] & 0x04));
-		wacom_report_key(wcombo, BTN_3, (data[5] & 0x08));
-		wacom_report_key(wcombo, BTN_4, (data[6] & 0x01));
-		wacom_report_key(wcombo, BTN_5, (data[6] & 0x02));
-		wacom_report_key(wcombo, BTN_6, (data[6] & 0x04));
-		wacom_report_key(wcombo, BTN_7, (data[6] & 0x08));
-		wacom_report_abs(wcombo, ABS_RX, ((data[1] & 0x1f) << 8) | data[2]);
-		wacom_report_abs(wcombo, ABS_RY, ((data[3] & 0x1f) << 8) | data[4]);
-
-		if((data[5] & 0x0f) | (data[6] & 0x0f) | (data[1] & 0x1f) |
-			data[2] | (data[3] & 0x1f) | data[4])
-			wacom_report_key(wcombo, wacom->tool[1], 1);
-		else
-			wacom_report_key(wcombo, wacom->tool[1], 0);
-		wacom_report_abs(wcombo, ABS_MISC, PAD_DEVICE_ID);
-		wacom_input_event(wcombo, EV_MSC, MSC_SERIAL, 0xffffffff);
-                return 1;
-	}
-
-	/* process in/out prox events */
-	result = wacom_intuos_inout(wacom, wcombo);
-	if (result)
-                return result-1;
-
-	/* Only large I3 and I1 & I2 support Lense Cursor */
- 	if((wacom->tool[idx] == BTN_TOOL_LENS)
-			&& ((wacom->features->type == INTUOS3)
-		 	|| (wacom->features->type == INTUOS3S)))
-		return 0;
-
-	/* Cintiq doesn't send data when RDY bit isn't set */
-	if ((wacom->features->type == CINTIQ) && !(data[1] & 0x40))
-                 return 0;
-
-	if (wacom->features->type >= INTUOS3S) {
-		wacom_report_abs(wcombo, ABS_X, (data[2] << 9) | (data[3] << 1) | ((data[9] >> 1) & 1));
-		wacom_report_abs(wcombo, ABS_Y, (data[4] << 9) | (data[5] << 1) | (data[9] & 1));
-		wacom_report_abs(wcombo, ABS_DISTANCE, ((data[9] >> 2) & 0x3f));
-	} else {
-		wacom_report_abs(wcombo, ABS_X, wacom_be16_to_cpu(&data[2]));
-		wacom_report_abs(wcombo, ABS_Y, wacom_be16_to_cpu(&data[4]));
-		wacom_report_abs(wcombo, ABS_DISTANCE, ((data[9] >> 3) & 0x1f));
-	}
-
-	/* process general packets */
-	wacom_intuos_general(wacom, wcombo);
-
-	/* 4D mouse, 2D mouse, marker pen rotation, or Lens cursor packets */
-	if ((data[1] & 0xbc) == 0xa8 || (data[1] & 0xbe) == 0xb0) {
-
-		if (data[1] & 0x02) {
-			/* Rotation packet */
-			if (wacom->features->type >= INTUOS3S) {
-				/* I3 marker pen rotation reported as wheel
-				 * due to valuator limitation
-				 */
-				t = (data[6] << 3) | ((data[7] >> 5) & 7);
-				t = (data[7] & 0x20) ? ((t > 900) ? ((t-1) / 2 - 1350) :
-					((t-1) / 2 + 450)) : (450 - t / 2) ;
-				wacom_report_abs(wcombo, ABS_WHEEL, t);
-			} else {
-				/* 4D mouse rotation packet */
-				t = (data[6] << 3) | ((data[7] >> 5) & 7);
-				wacom_report_abs(wcombo, ABS_RZ, (data[7] & 0x20) ?
-					((t - 1) / 2) : -t / 2);
-			}
-
-		} else if (!(data[1] & 0x10) && wacom->features->type < INTUOS3S) {
-			/* 4D mouse packet */
-			wacom_report_key(wcombo, BTN_LEFT,   data[8] & 0x01);
-			wacom_report_key(wcombo, BTN_MIDDLE, data[8] & 0x02);
-			wacom_report_key(wcombo, BTN_RIGHT,  data[8] & 0x04);
-
-			wacom_report_key(wcombo, BTN_SIDE,   data[8] & 0x20);
-			wacom_report_key(wcombo, BTN_EXTRA,  data[8] & 0x10);
-			t = (data[6] << 2) | ((data[7] >> 6) & 3);
-			wacom_report_abs(wcombo, ABS_THROTTLE, (data[8] & 0x08) ? -t : t);
-
-		} else if (wacom->tool[idx] == BTN_TOOL_MOUSE) {
-			/* 2D mouse packet */
-			wacom_report_key(wcombo, BTN_LEFT,   data[8] & 0x04);
-			wacom_report_key(wcombo, BTN_MIDDLE, data[8] & 0x08);
-			wacom_report_key(wcombo, BTN_RIGHT,  data[8] & 0x10);
-			wacom_report_rel(wcombo, REL_WHEEL, (data[8] & 0x01)
-						 - ((data[8] & 0x02) >> 1));
-
-			/* I3 2D mouse side buttons */
-			if (wacom->features->type >= INTUOS3S && wacom->features->type <= INTUOS3L) {
-				wacom_report_key(wcombo, BTN_SIDE,   data[8] & 0x40);
-				wacom_report_key(wcombo, BTN_EXTRA,  data[8] & 0x20);
-			}
-
-		} else if (wacom->features->type < INTUOS3S || wacom->features->type == INTUOS3L) {
-			/* Lens cursor packets */
-			wacom_report_key(wcombo, BTN_LEFT,   data[8] & 0x01);
-			wacom_report_key(wcombo, BTN_MIDDLE, data[8] & 0x02);
-			wacom_report_key(wcombo, BTN_RIGHT,  data[8] & 0x04);
-			wacom_report_key(wcombo, BTN_SIDE,   data[8] & 0x10);
-			wacom_report_key(wcombo, BTN_EXTRA,  data[8] & 0x08);
-		}
-	}
-
-	wacom_report_abs(wcombo, ABS_MISC, wacom->id[idx]); /* report tool id */
-	wacom_report_key(wcombo, wacom->tool[idx], 1);
-	wacom_input_event(wcombo, EV_MSC, MSC_SERIAL, wacom->serial[idx]);
-	return 1;
-}
-
-int wacom_wac_irq(struct wacom_wac *wacom_wac, void *wcombo)
-{
-	switch (wacom_wac->features->type) {
-		case PENPARTNER:
-			return (wacom_penpartner_irq(wacom_wac, wcombo));
-			break;
-		case PL:
-			return (wacom_pl_irq(wacom_wac, wcombo));
-			break;
-		case WACOM_G4:
-		case GRAPHIRE:
-			return (wacom_graphire_irq(wacom_wac, wcombo));
-			break;
-		case PTU:
-			return (wacom_ptu_irq(wacom_wac, wcombo));
-			break;
-		case INTUOS:
-		case INTUOS3S:
-		case INTUOS3:
-		case INTUOS3L:
-		case CINTIQ:
-			return (wacom_intuos_irq(wacom_wac, wcombo));
-			break;
-		default:
-			return 0;
-	}
-	return 0;
-}
-
-void wacom_init_input_dev(struct input_dev *input_dev, struct wacom_wac *wacom_wac)
-{
-	switch (wacom_wac->features->type) {
-		case WACOM_G4:
-			input_dev_g4(input_dev, wacom_wac);
-			/* fall through */
-		case GRAPHIRE:
-			input_dev_g(input_dev, wacom_wac);
-			break;
-		case INTUOS3:
-		case INTUOS3L:
-		case CINTIQ:
-			input_dev_i3(input_dev, wacom_wac);
-			/* fall through */
-		case INTUOS3S:
-			input_dev_i3s(input_dev, wacom_wac);
-		case INTUOS:
-			input_dev_i(input_dev, wacom_wac);
-			break;
-		case PL:
-		case PTU:
-			input_dev_pl(input_dev, wacom_wac);
-			break;
-		case PENPARTNER:
-			input_dev_pt(input_dev, wacom_wac);
-			break;
-	}
-	return;
-}
-
-static struct wacom_features wacom_features[] = {
-	{ "Wacom Penpartner",    7,   5040,  3780,  255,  0, PENPARTNER },
-        { "Wacom Graphire",      8,  10206,  7422,  511, 63, GRAPHIRE },
-	{ "Wacom Graphire2 4x5", 8,  10206,  7422,  511, 63, GRAPHIRE },
-	{ "Wacom Graphire2 5x7", 8,  13918, 10206,  511, 63, GRAPHIRE },
-	{ "Wacom Graphire3",     8,  10208,  7424,  511, 63, GRAPHIRE },
-	{ "Wacom Graphire3 6x8", 8,  16704, 12064,  511, 63, GRAPHIRE },
-	{ "Wacom Graphire4 4x5", 8,  10208,  7424,  511, 63, WACOM_G4 },
-	{ "Wacom Graphire4 6x8", 8,  16704, 12064,  511, 63, WACOM_G4 },
-	{ "Wacom Volito",        8,   5104,  3712,  511, 63, GRAPHIRE },
-	{ "Wacom PenStation2",   8,   3250,  2320,  255, 63, GRAPHIRE },
-	{ "Wacom Volito2 4x5",   8,   5104,  3712,  511, 63, GRAPHIRE },
-	{ "Wacom Volito2 2x3",   8,   3248,  2320,  511, 63, GRAPHIRE },
-	{ "Wacom PenPartner2",   8,   3250,  2320,  255, 63, GRAPHIRE },
-	{ "Wacom Intuos 4x5",   10,  12700, 10600, 1023, 31, INTUOS },
-	{ "Wacom Intuos 6x8",   10,  20320, 16240, 1023, 31, INTUOS },
-	{ "Wacom Intuos 9x12",  10,  30480, 24060, 1023, 31, INTUOS },
-	{ "Wacom Intuos 12x12", 10,  30480, 31680, 1023, 31, INTUOS },
-	{ "Wacom Intuos 12x18", 10,  45720, 31680, 1023, 31, INTUOS },
-	{ "Wacom PL400",         8,   5408,  4056,  255,  0, PL },
-	{ "Wacom PL500",         8,   6144,  4608,  255,  0, PL },
-	{ "Wacom PL600",         8,   6126,  4604,  255,  0, PL },
-	{ "Wacom PL600SX",       8,   6260,  5016,  255,  0, PL },
-	{ "Wacom PL550",         8,   6144,  4608,  511,  0, PL },
-	{ "Wacom PL800",         8,   7220,  5780,  511,  0, PL },
-	{ "Wacom PL700",         8,   6758,  5406,  511,  0, PL },
-	{ "Wacom PL510",         8,   6282,  4762,  511,  0, PL },
-	{ "Wacom DTU710",        8,  34080, 27660,  511,  0, PL },
-	{ "Wacom DTF521",        8,   6282,  4762,  511,  0, PL },
-	{ "Wacom DTF720",        8,   6858,  5506,  511,  0, PL },
-	{ "Wacom Cintiq Partner",8,  20480, 15360,  511,  0, PTU },
-	{ "Wacom Intuos2 4x5",   10, 12700, 10600, 1023, 31, INTUOS },
-	{ "Wacom Intuos2 6x8",   10, 20320, 16240, 1023, 31, INTUOS },
-	{ "Wacom Intuos2 9x12",  10, 30480, 24060, 1023, 31, INTUOS },
-	{ "Wacom Intuos2 12x12", 10, 30480, 31680, 1023, 31, INTUOS },
-	{ "Wacom Intuos2 12x18", 10, 45720, 31680, 1023, 31, INTUOS },
-	{ "Wacom Intuos3 4x5",   10, 25400, 20320, 1023, 63, INTUOS3S },
-	{ "Wacom Intuos3 6x8",   10, 40640, 30480, 1023, 63, INTUOS3 },
-	{ "Wacom Intuos3 9x12",  10, 60960, 45720, 1023, 63, INTUOS3 },
-	{ "Wacom Intuos3 12x12", 10, 60960, 60960, 1023, 63, INTUOS3L },
-	{ "Wacom Intuos3 12x19", 10, 97536, 60960, 1023, 63, INTUOS3L },
-	{ "Wacom Intuos3 6x11",  10, 54204, 31750, 1023, 63, INTUOS3 },
-	{ "Wacom Intuos3 4x6",   10, 31496, 19685, 1023, 63, INTUOS3S },
-	{ "Wacom Cintiq 21UX",   10, 87200, 65600, 1023, 63, CINTIQ },
-	{ "Wacom Intuos2 6x8",   10, 20320, 16240, 1023, 31, INTUOS },
-	{ }
-};
-
-static struct usb_device_id wacom_ids[] = {
-	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x00) },
-	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x10) },
-	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x11) },
-	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x12) },
-	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x13) },
-	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x14) },
-	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x15) },
-	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x16) },
-	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x60) },
-	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x61) },
-	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x62) },
-	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x63) },
-	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x64) },
-	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x20) },
-	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x21) },
-	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x22) },
-	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x23) },
-	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x24) },
-	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x30) },
-	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x31) },
-	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x32) },
-	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x33) },
-	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x34) },
-	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x35) },
-	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x37) },
-	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x38) },
-	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x39) },
-	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0xC0) },
-	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0xC4) },
-	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x03) },
-	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x41) },
-	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x42) },
-	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x43) },
-	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x44) },
-	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x45) },
-	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0xB0) },
-	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0xB1) },
-	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0xB2) },
-	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0xB3) },
-	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0xB4) },
-	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0xB5) },
-	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0xB7) },
-	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x3F) },
-	{ USB_DEVICE(USB_VENDOR_ID_WACOM, 0x47) },
-	{ }
-};
-
-const struct usb_device_id * get_device_table(void) {
-        const struct usb_device_id * id_table = wacom_ids;
-        return id_table;
-}
-
-struct wacom_features * get_wacom_feature(const struct usb_device_id * id) {
-        int index = id - wacom_ids;
-        struct wacom_features *wf = &wacom_features[index];
-        return wf;
-}
-
-MODULE_DEVICE_TABLE(usb, wacom_ids);
diff --git a/drivers/usb/input/wacom_wac.h b/drivers/usb/input/wacom_wac.h
deleted file mode 100644
index 89793666ee8a..000000000000
--- a/drivers/usb/input/wacom_wac.h
+++ /dev/null
@@ -1,49 +0,0 @@
-/*
- * drivers/usb/input/wacom_wac.h
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-#ifndef WACOM_WAC_H
-#define WACOM_WAC_H
-
-#define STYLUS_DEVICE_ID	0x02
-#define CURSOR_DEVICE_ID	0x06
-#define ERASER_DEVICE_ID	0x0A
-#define PAD_DEVICE_ID		0x0F
-
-enum {
-	PENPARTNER = 0,
-	GRAPHIRE,
-	WACOM_G4,
-	PTU,
-	PL,
-	INTUOS,
-	INTUOS3S,
-	INTUOS3,
-	INTUOS3L,
-	CINTIQ,
-	MAX_TYPE
-};
-
-struct wacom_features {
-	char *name;
-	int pktlen;
-	int x_max;
-	int y_max;
-	int pressure_max;
-	int distance_max;
-	int type;
-};
-
-struct wacom_wac {
-	unsigned char *data;
-        int tool[2];
-        int id[2];
-        __u32 serial[2];
-	struct wacom_features *features;
-};
-
-#endif