Merge tag 'usb-5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB updates from Greg KH:
 "Here is the big set of USB patches for 5.4-rc1.

  Two major chunks of code are moving out of the tree and into the
  staging directory, uwb and wusb (wireless USB support), because there
  are no devices that actually use this protocol anymore, and what we
  have today probably doesn't work at all given that the maintainers
  left many many years ago. So move it to staging where it will be
  removed in a few releases if no one screams.

  Other than that, lots of little things. The usual gadget and xhci and
  usb serial driver updates, along with a bunch of sysfs file cleanups
  due to the driver core changes to support that. Nothing really major,
  just constant forward progress.

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'usb-5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (159 commits)
  USB: usbcore: Fix slab-out-of-bounds bug during device reset
  usb: cdns3: Remove redundant dev_err call in cdns3_probe()
  USB: rio500: Fix lockdep violation
  USB: rio500: simplify locking
  usb: mtu3: register a USB Role Switch for dual role mode
  usb: common: add USB GPIO based connection detection driver
  usb: common: create Kconfig file
  usb: roles: get usb-role-switch from parent
  usb: roles: Add fwnode_usb_role_switch_get() function
  device connection: Add fwnode_connection_find_match()
  usb: roles: Introduce stubs for the exiting functions in role.h
  dt-bindings: usb: mtu3: add properties about USB Role Switch
  dt-bindings: usb: add binding for USB GPIO based connection detection driver
  dt-bindings: connector: add optional properties for Type-B
  dt-binding: usb: add usb-role-switch property
  usbip: Implement SG support to vhci-hcd and stub driver
  usb: roles: intel: Enable static DRD mode for role switch
  xhci-ext-caps.c: Add property to disable Intel SW switch
  usb: dwc3: remove generic PHY calibrate() calls
  usb: core: phy: add support for PHY calibration
  ...

1 files changed, 5 insertions, 10 deletions

diff --git a/drivers/usb/host/xhci-plat.c b/drivers/usb/host/xhci-plat.c
index 998241f5fce3..d90cd5ec09cf 100644
--- a/drivers/usb/host/xhci-plat.c
+++ b/drivers/usb/host/xhci-plat.c
@@ -66,12 +66,14 @@ static int xhci_priv_resume_quirk(struct usb_hcd *hcd)
 
 static void xhci_plat_quirks(struct device *dev, struct xhci_hcd *xhci)
 {
+	struct xhci_plat_priv *priv = xhci_to_priv(xhci);
+
 	/*
 	 * As of now platform drivers don't provide MSI support so we ensure
 	 * here that the generic code does not try to make a pci_dev from our
 	 * dev struct in order to setup MSI
 	 */
-	xhci->quirks |= XHCI_PLAT;
+	xhci->quirks |= XHCI_PLAT | priv->quirks;
 }
 
 /* called during probe() after chip reset completes */
@@ -103,17 +105,11 @@ static const struct xhci_plat_priv xhci_plat_marvell_armada3700 = {
 };
 
 static const struct xhci_plat_priv xhci_plat_renesas_rcar_gen2 = {
-	.firmware_name = XHCI_RCAR_FIRMWARE_NAME_V1,
-	.init_quirk = xhci_rcar_init_quirk,
-	.plat_start = xhci_rcar_start,
-	.resume_quirk = xhci_rcar_resume_quirk,
+	SET_XHCI_PLAT_PRIV_FOR_RCAR(XHCI_RCAR_FIRMWARE_NAME_V1)
 };
 
 static const struct xhci_plat_priv xhci_plat_renesas_rcar_gen3 = {
-	.firmware_name = XHCI_RCAR_FIRMWARE_NAME_V3,
-	.init_quirk = xhci_rcar_init_quirk,
-	.plat_start = xhci_rcar_start,
-	.resume_quirk = xhci_rcar_resume_quirk,
+	SET_XHCI_PLAT_PRIV_FOR_RCAR(XHCI_RCAR_FIRMWARE_NAME_V3)
 };
 
 static const struct of_device_id usb_xhci_of_match[] = {
@@ -307,7 +303,6 @@ static int xhci_plat_probe(struct platform_device *pdev)
 		ret = usb_phy_init(hcd->usb_phy);
 		if (ret)
 			goto put_usb3_hcd;
-		hcd->skip_phy_initialization = 1;
 	}
 
 	hcd->tpl_support = of_usb_host_tpl_support(sysdev->of_node);