diff options
| author | Neil Armstrong <narmstrong@baylibre.com> | 2019-04-23 10:51:27 +0200 |
|---|---|---|
| committer | Felipe Balbi <felipe.balbi@linux.intel.com> | 2019-05-03 09:13:47 +0300 |
| commit | c99993376f72ca3dcc989813512607c6435cbed8 (patch) | |
| tree | 49ecef680ba90f0ae48a935bdefb6b6641471f4c /drivers/usb/dwc3/Makefile | |
| parent | fc4e326ee72cc36c942333c65d851247b31c567b (diff) | |
usb: dwc3: Add Amlogic G12A DWC3 glue
Adds support for Amlogic G12A USB Control Glue HW.
The Amlogic G12A SoC Family embeds 2 USB Controllers :
- a DWC3 IP configured as Host for USB2 and USB3
- a DWC2 IP configured as Peripheral USB2 Only
A glue connects these both controllers to 2 USB2 PHYs, and optionnally
to an USB3+PCIE Combo PHY shared with the PCIE controller.
The Glue configures the UTMI 8bit interfaces for the USB2 PHYs, including
routing of the OTG PHY between the DWC3 and DWC2 controllers, and
setups the on-chip OTG mode selection for this PHY.
This drivers supports the on-probe setup of the OTG mode, and manually
via a debugfs interface. The IRQ mode change detect is yet to be added
in a future patchset, mainly due to lack of hardware to validate on.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Diffstat (limited to 'drivers/usb/dwc3/Makefile')
| -rw-r--r-- | drivers/usb/dwc3/Makefile | 1 |
1 files changed, 1 insertions, 0 deletions
diff --git a/drivers/usb/dwc3/Makefile b/drivers/usb/dwc3/Makefile index 6e3ef6144e5d..ae86da0dc5bd 100644 --- a/drivers/usb/dwc3/Makefile +++ b/drivers/usb/dwc3/Makefile @@ -47,6 +47,7 @@ obj-$(CONFIG_USB_DWC3_EXYNOS) += dwc3-exynos.o obj-$(CONFIG_USB_DWC3_PCI) += dwc3-pci.o obj-$(CONFIG_USB_DWC3_HAPS) += dwc3-haps.o obj-$(CONFIG_USB_DWC3_KEYSTONE) += dwc3-keystone.o +obj-$(CONFIG_USB_DWC3_MESON_G12A) += dwc3-meson-g12a.o obj-$(CONFIG_USB_DWC3_OF_SIMPLE) += dwc3-of-simple.o obj-$(CONFIG_USB_DWC3_ST) += dwc3-st.o obj-$(CONFIG_USB_DWC3_QCOM) += dwc3-qcom.o |