tty: serial: remove pnx8xxx uart driver

Commit 625326ea9c84 ("MIPS: Remove PNX833x alias NXP_STB22x") removed
support for PNX833x, so it's time to remove serial driver, too.

Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Link: https://lore.kernel.org/r/20201106130332.103476-1-tsbogend@alpha.franken.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

3 files changed, 0 insertions, 875 deletions

diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig
index 1044fc387691..b146c93146ee 100644
--- a/drivers/tty/serial/Kconfig
+++ b/drivers/tty/serial/Kconfig
@@ -703,22 +703,6 @@ config SERIAL_SH_SCI_DMA
 	depends on SERIAL_SH_SCI && DMA_ENGINE
 	default ARCH_RENESAS
 
-config SERIAL_PNX8XXX
-	bool "Enable PNX8XXX SoCs' UART Support"
-	depends on SOC_PNX833X
-	select SERIAL_CORE
-	help
-	  If you have a MIPS-based Philips SoC such as PNX8330 and you want
-	  to use serial ports, say Y.  Otherwise, say N.
-
-config SERIAL_PNX8XXX_CONSOLE
-	bool "Enable PNX8XX0 serial console"
-	depends on SERIAL_PNX8XXX
-	select SERIAL_CORE_CONSOLE
-	help
-	  If you have a MIPS-based Philips SoC such as PNX8330 and you want
-	  to use serial console, say Y. Otherwise, say N.
-
 config SERIAL_HS_LPC32XX
 	tristate "LPC32XX high speed serial port support"
 	depends on ARCH_LPC32XX || COMPILE_TEST
diff --git a/drivers/tty/serial/Makefile b/drivers/tty/serial/Makefile
index caf167f0c10a..af44b231123c 100644
--- a/drivers/tty/serial/Makefile
+++ b/drivers/tty/serial/Makefile
@@ -27,7 +27,6 @@ obj-$(CONFIG_SERIAL_AMBA_PL010) += amba-pl010.o
 obj-$(CONFIG_SERIAL_AMBA_PL011) += amba-pl011.o
 obj-$(CONFIG_SERIAL_CLPS711X) += clps711x.o
 obj-$(CONFIG_SERIAL_PXA_NON8250) += pxa.o
-obj-$(CONFIG_SERIAL_PNX8XXX) += pnx8xxx_uart.o
 obj-$(CONFIG_SERIAL_SA1100) += sa1100.o
 obj-$(CONFIG_SERIAL_BCM63XX) += bcm63xx_uart.o
 obj-$(CONFIG_SERIAL_SAMSUNG) += samsung_tty.o
diff --git a/drivers/tty/serial/pnx8xxx_uart.c b/drivers/tty/serial/pnx8xxx_uart.c
deleted file mode 100644
index 972d94e8d32b..000000000000
--- a/drivers/tty/serial/pnx8xxx_uart.c
+++ /dev/null
@@ -1,858 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * UART driver for PNX8XXX SoCs
- *
- * Author: Per Hallsmark per.hallsmark@mvista.com
- * Ported to 2.6 kernel by EmbeddedAlley
- * Reworked by Vitaly Wool <vitalywool@gmail.com>
- *
- * Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o.
- * Copyright (C) 2000 Deep Blue Solutions Ltd.
- */
-
-#include <linux/module.h>
-#include <linux/ioport.h>
-#include <linux/init.h>
-#include <linux/console.h>
-#include <linux/sysrq.h>
-#include <linux/device.h>
-#include <linux/platform_device.h>
-#include <linux/tty.h>
-#include <linux/tty_flip.h>
-#include <linux/serial_core.h>
-#include <linux/serial.h>
-#include <linux/serial_pnx8xxx.h>
-
-#include <asm/io.h>
-#include <asm/irq.h>
-
-/* We'll be using StrongARM sa1100 serial port major/minor */
-#define SERIAL_PNX8XXX_MAJOR	204
-#define MINOR_START		5
-
-#define NR_PORTS		2
-
-#define PNX8XXX_ISR_PASS_LIMIT	256
-
-/*
- * Convert from ignore_status_mask or read_status_mask to FIFO
- * and interrupt status bits
- */
-#define SM_TO_FIFO(x)	((x) >> 10)
-#define SM_TO_ISTAT(x)	((x) & 0x000001ff)
-#define FIFO_TO_SM(x)	((x) << 10)
-#define ISTAT_TO_SM(x)	((x) & 0x000001ff)
-
-/*
- * This is the size of our serial port register set.
- */
-#define UART_PORT_SIZE	0x1000
-
-/*
- * This determines how often we check the modem status signals
- * for any change.  They generally aren't connected to an IRQ
- * so we have to poll them.  We also check immediately before
- * filling the TX fifo incase CTS has been dropped.
- */
-#define MCTRL_TIMEOUT	(250*HZ/1000)
-
-extern struct pnx8xxx_port pnx8xxx_ports[];
-
-static inline int serial_in(struct pnx8xxx_port *sport, int offset)
-{
-	return (__raw_readl(sport->port.membase + offset));
-}
-
-static inline void serial_out(struct pnx8xxx_port *sport, int offset, int value)
-{
-	__raw_writel(value, sport->port.membase + offset);
-}
-
-/*
- * Handle any change of modem status signal since we were last called.
- */
-static void pnx8xxx_mctrl_check(struct pnx8xxx_port *sport)
-{
-	unsigned int status, changed;
-
-	status = sport->port.ops->get_mctrl(&sport->port);
-	changed = status ^ sport->old_status;
-
-	if (changed == 0)
-		return;
-
-	sport->old_status = status;
-
-	if (changed & TIOCM_RI)
-		sport->port.icount.rng++;
-	if (changed & TIOCM_DSR)
-		sport->port.icount.dsr++;
-	if (changed & TIOCM_CAR)
-		uart_handle_dcd_change(&sport->port, status & TIOCM_CAR);
-	if (changed & TIOCM_CTS)
-		uart_handle_cts_change(&sport->port, status & TIOCM_CTS);
-
-	wake_up_interruptible(&sport->port.state->port.delta_msr_wait);
-}
-
-/*
- * This is our per-port timeout handler, for checking the
- * modem status signals.
- */
-static void pnx8xxx_timeout(struct timer_list *t)
-{
-	struct pnx8xxx_port *sport = from_timer(sport, t, timer);
-	unsigned long flags;
-
-	if (sport->port.state) {
-		spin_lock_irqsave(&sport->port.lock, flags);
-		pnx8xxx_mctrl_check(sport);
-		spin_unlock_irqrestore(&sport->port.lock, flags);
-
-		mod_timer(&sport->timer, jiffies + MCTRL_TIMEOUT);
-	}
-}
-
-/*
- * interrupts disabled on entry
- */
-static void pnx8xxx_stop_tx(struct uart_port *port)
-{
-	struct pnx8xxx_port *sport =
-		container_of(port, struct pnx8xxx_port, port);
-	u32 ien;
-
-	/* Disable TX intr */
-	ien = serial_in(sport, PNX8XXX_IEN);
-	serial_out(sport, PNX8XXX_IEN, ien & ~PNX8XXX_UART_INT_ALLTX);
-
-	/* Clear all pending TX intr */
-	serial_out(sport, PNX8XXX_ICLR, PNX8XXX_UART_INT_ALLTX);
-}
-
-/*
- * interrupts may not be disabled on entry
- */
-static void pnx8xxx_start_tx(struct uart_port *port)
-{
-	struct pnx8xxx_port *sport =
-		container_of(port, struct pnx8xxx_port, port);
-	u32 ien;
-
-	/* Clear all pending TX intr */
-	serial_out(sport, PNX8XXX_ICLR, PNX8XXX_UART_INT_ALLTX);
-
-	/* Enable TX intr */
-	ien = serial_in(sport, PNX8XXX_IEN);
-	serial_out(sport, PNX8XXX_IEN, ien | PNX8XXX_UART_INT_ALLTX);
-}
-
-/*
- * Interrupts enabled
- */
-static void pnx8xxx_stop_rx(struct uart_port *port)
-{
-	struct pnx8xxx_port *sport =
-		container_of(port, struct pnx8xxx_port, port);
-	u32 ien;
-
-	/* Disable RX intr */
-	ien = serial_in(sport, PNX8XXX_IEN);
-	serial_out(sport, PNX8XXX_IEN, ien & ~PNX8XXX_UART_INT_ALLRX);
-
-	/* Clear all pending RX intr */
-	serial_out(sport, PNX8XXX_ICLR, PNX8XXX_UART_INT_ALLRX);
-}
-
-/*
- * Set the modem control timer to fire immediately.
- */
-static void pnx8xxx_enable_ms(struct uart_port *port)
-{
-	struct pnx8xxx_port *sport =
-		container_of(port, struct pnx8xxx_port, port);
-
-	mod_timer(&sport->timer, jiffies);
-}
-
-static void pnx8xxx_rx_chars(struct pnx8xxx_port *sport)
-{
-	unsigned int status, ch, flg;
-
-	status = FIFO_TO_SM(serial_in(sport, PNX8XXX_FIFO)) |
-		 ISTAT_TO_SM(serial_in(sport, PNX8XXX_ISTAT));
-	while (status & FIFO_TO_SM(PNX8XXX_UART_FIFO_RXFIFO)) {
-		ch = serial_in(sport, PNX8XXX_FIFO) & 0xff;
-
-		sport->port.icount.rx++;
-
-		flg = TTY_NORMAL;
-
-		/*
-		 * note that the error handling code is
-		 * out of the main execution path
-		 */
-		if (status & (FIFO_TO_SM(PNX8XXX_UART_FIFO_RXFE |
-					PNX8XXX_UART_FIFO_RXPAR |
-					PNX8XXX_UART_FIFO_RXBRK) |
-			      ISTAT_TO_SM(PNX8XXX_UART_INT_RXOVRN))) {
-			if (status & FIFO_TO_SM(PNX8XXX_UART_FIFO_RXBRK)) {
-				status &= ~(FIFO_TO_SM(PNX8XXX_UART_FIFO_RXFE) |
-					FIFO_TO_SM(PNX8XXX_UART_FIFO_RXPAR));
-				sport->port.icount.brk++;
-				if (uart_handle_break(&sport->port))
-					goto ignore_char;
-			} else if (status & FIFO_TO_SM(PNX8XXX_UART_FIFO_RXPAR))
-				sport->port.icount.parity++;
-			else if (status & FIFO_TO_SM(PNX8XXX_UART_FIFO_RXFE))
-				sport->port.icount.frame++;
-			if (status & ISTAT_TO_SM(PNX8XXX_UART_INT_RXOVRN))
-				sport->port.icount.overrun++;
-
-			status &= sport->port.read_status_mask;
-
-			if (status & FIFO_TO_SM(PNX8XXX_UART_FIFO_RXPAR))
-				flg = TTY_PARITY;
-			else if (status & FIFO_TO_SM(PNX8XXX_UART_FIFO_RXFE))
-				flg = TTY_FRAME;
-
-			sport->port.sysrq = 0;
-		}
-
-		if (uart_handle_sysrq_char(&sport->port, ch))
-			goto ignore_char;
-
-		uart_insert_char(&sport->port, status,
-				ISTAT_TO_SM(PNX8XXX_UART_INT_RXOVRN), ch, flg);
-
-	ignore_char:
-		serial_out(sport, PNX8XXX_LCR, serial_in(sport, PNX8XXX_LCR) |
-				PNX8XXX_UART_LCR_RX_NEXT);
-		status = FIFO_TO_SM(serial_in(sport, PNX8XXX_FIFO)) |
-			 ISTAT_TO_SM(serial_in(sport, PNX8XXX_ISTAT));
-	}
-
-	spin_unlock(&sport->port.lock);
-	tty_flip_buffer_push(&sport->port.state->port);
-	spin_lock(&sport->port.lock);
-}
-
-static void pnx8xxx_tx_chars(struct pnx8xxx_port *sport)
-{
-	struct circ_buf *xmit = &sport->port.state->xmit;
-
-	if (sport->port.x_char) {
-		serial_out(sport, PNX8XXX_FIFO, sport->port.x_char);
-		sport->port.icount.tx++;
-		sport->port.x_char = 0;
-		return;
-	}
-
-	/*
-	 * Check the modem control lines before
-	 * transmitting anything.
-	 */
-	pnx8xxx_mctrl_check(sport);
-
-	if (uart_circ_empty(xmit) || uart_tx_stopped(&sport->port)) {
-		pnx8xxx_stop_tx(&sport->port);
-		return;
-	}
-
-	/*
-	 * TX while bytes available
-	 */
-	while (((serial_in(sport, PNX8XXX_FIFO) &
-					PNX8XXX_UART_FIFO_TXFIFO) >> 16) < 16) {
-		serial_out(sport, PNX8XXX_FIFO, xmit->buf[xmit->tail]);
-		xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
-		sport->port.icount.tx++;
-		if (uart_circ_empty(xmit))
-			break;
-	}
-
-	if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
-		uart_write_wakeup(&sport->port);
-
-	if (uart_circ_empty(xmit))
-		pnx8xxx_stop_tx(&sport->port);
-}
-
-static irqreturn_t pnx8xxx_int(int irq, void *dev_id)
-{
-	struct pnx8xxx_port *sport = dev_id;
-	unsigned int status;
-
-	spin_lock(&sport->port.lock);
-	/* Get the interrupts */
-	status  = serial_in(sport, PNX8XXX_ISTAT) & serial_in(sport, PNX8XXX_IEN);
-
-	/* Byte or break signal received */
-	if (status & (PNX8XXX_UART_INT_RX | PNX8XXX_UART_INT_BREAK))
-		pnx8xxx_rx_chars(sport);
-
-	/* TX holding register empty - transmit a byte */
-	if (status & PNX8XXX_UART_INT_TX)
-		pnx8xxx_tx_chars(sport);
-
-	/* Clear the ISTAT register */
-	serial_out(sport, PNX8XXX_ICLR, status);
-
-	spin_unlock(&sport->port.lock);
-	return IRQ_HANDLED;
-}
-
-/*
- * Return TIOCSER_TEMT when transmitter is not busy.
- */
-static unsigned int pnx8xxx_tx_empty(struct uart_port *port)
-{
-	struct pnx8xxx_port *sport =
-		container_of(port, struct pnx8xxx_port, port);
-
-	return serial_in(sport, PNX8XXX_FIFO) & PNX8XXX_UART_FIFO_TXFIFO_STA ? 0 : TIOCSER_TEMT;
-}
-
-static unsigned int pnx8xxx_get_mctrl(struct uart_port *port)
-{
-	struct pnx8xxx_port *sport =
-		container_of(port, struct pnx8xxx_port, port);
-	unsigned int mctrl = TIOCM_DSR;
-	unsigned int msr;
-
-	/* REVISIT */
-
-	msr = serial_in(sport, PNX8XXX_MCR);
-
-	mctrl |= msr & PNX8XXX_UART_MCR_CTS ? TIOCM_CTS : 0;
-	mctrl |= msr & PNX8XXX_UART_MCR_DCD ? TIOCM_CAR : 0;
-
-	return mctrl;
-}
-
-static void pnx8xxx_set_mctrl(struct uart_port *port, unsigned int mctrl)
-{
-#if	0	/* FIXME */
-	struct pnx8xxx_port *sport = (struct pnx8xxx_port *)port;
-	unsigned int msr;
-#endif
-}
-
-/*
- * Interrupts always disabled.
- */
-static void pnx8xxx_break_ctl(struct uart_port *port, int break_state)
-{
-	struct pnx8xxx_port *sport =
-		container_of(port, struct pnx8xxx_port, port);
-	unsigned long flags;
-	unsigned int lcr;
-
-	spin_lock_irqsave(&sport->port.lock, flags);
-	lcr = serial_in(sport, PNX8XXX_LCR);
-	if (break_state == -1)
-		lcr |= PNX8XXX_UART_LCR_TXBREAK;
-	else
-		lcr &= ~PNX8XXX_UART_LCR_TXBREAK;
-	serial_out(sport, PNX8XXX_LCR, lcr);
-	spin_unlock_irqrestore(&sport->port.lock, flags);
-}
-
-static int pnx8xxx_startup(struct uart_port *port)
-{
-	struct pnx8xxx_port *sport =
-		container_of(port, struct pnx8xxx_port, port);
-	int retval;
-
-	/*
-	 * Allocate the IRQ
-	 */
-	retval = request_irq(sport->port.irq, pnx8xxx_int, 0,
-			     "pnx8xxx-uart", sport);
-	if (retval)
-		return retval;
-
-	/*
-	 * Finally, clear and enable interrupts
-	 */
-
-	serial_out(sport, PNX8XXX_ICLR, PNX8XXX_UART_INT_ALLRX |
-			     PNX8XXX_UART_INT_ALLTX);
-
-	serial_out(sport, PNX8XXX_IEN, serial_in(sport, PNX8XXX_IEN) |
-			    PNX8XXX_UART_INT_ALLRX |
-			    PNX8XXX_UART_INT_ALLTX);
-
-	/*
-	 * Enable modem status interrupts
-	 */
-	spin_lock_irq(&sport->port.lock);
-	pnx8xxx_enable_ms(&sport->port);
-	spin_unlock_irq(&sport->port.lock);
-
-	return 0;
-}
-
-static void pnx8xxx_shutdown(struct uart_port *port)
-{
-	struct pnx8xxx_port *sport =
-		container_of(port, struct pnx8xxx_port, port);
-	int lcr;
-
-	/*
-	 * Stop our timer.
-	 */
-	del_timer_sync(&sport->timer);
-
-	/*
-	 * Disable all interrupts
-	 */
-	serial_out(sport, PNX8XXX_IEN, 0);
-
-	/*
-	 * Reset the Tx and Rx FIFOS, disable the break condition
-	 */
-	lcr = serial_in(sport, PNX8XXX_LCR);
-	lcr &= ~PNX8XXX_UART_LCR_TXBREAK;
-	lcr |= PNX8XXX_UART_LCR_TX_RST | PNX8XXX_UART_LCR_RX_RST;
-	serial_out(sport, PNX8XXX_LCR, lcr);
-
-	/*
-	 * Clear all interrupts
-	 */
-	serial_out(sport, PNX8XXX_ICLR, PNX8XXX_UART_INT_ALLRX |
-			     PNX8XXX_UART_INT_ALLTX);
-
-	/*
-	 * Free the interrupt
-	 */
-	free_irq(sport->port.irq, sport);
-}
-
-static void
-pnx8xxx_set_termios(struct uart_port *port, struct ktermios *termios,
-		   struct ktermios *old)
-{
-	struct pnx8xxx_port *sport =
-		container_of(port, struct pnx8xxx_port, port);
-	unsigned long flags;
-	unsigned int lcr_fcr, old_ien, baud, quot;
-	unsigned int old_csize = old ? old->c_cflag & CSIZE : CS8;
-
-	/*
-	 * We only support CS7 and CS8.
-	 */
-	while ((termios->c_cflag & CSIZE) != CS7 &&
-	       (termios->c_cflag & CSIZE) != CS8) {
-		termios->c_cflag &= ~CSIZE;
-		termios->c_cflag |= old_csize;
-		old_csize = CS8;
-	}
-
-	if ((termios->c_cflag & CSIZE) == CS8)
-		lcr_fcr = PNX8XXX_UART_LCR_8BIT;
-	else
-		lcr_fcr = 0;
-
-	if (termios->c_cflag & CSTOPB)
-		lcr_fcr |= PNX8XXX_UART_LCR_2STOPB;
-	if (termios->c_cflag & PARENB) {
-		lcr_fcr |= PNX8XXX_UART_LCR_PAREN;
-		if (!(termios->c_cflag & PARODD))
-			lcr_fcr |= PNX8XXX_UART_LCR_PAREVN;
-	}
-
-	/*
-	 * Ask the core to calculate the divisor for us.
-	 */
-	baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16);
-	quot = uart_get_divisor(port, baud);
-
-	spin_lock_irqsave(&sport->port.lock, flags);
-
-	sport->port.read_status_mask = ISTAT_TO_SM(PNX8XXX_UART_INT_RXOVRN) |
-				ISTAT_TO_SM(PNX8XXX_UART_INT_EMPTY) |
-				ISTAT_TO_SM(PNX8XXX_UART_INT_RX);
-	if (termios->c_iflag & INPCK)
-		sport->port.read_status_mask |=
-			FIFO_TO_SM(PNX8XXX_UART_FIFO_RXFE) |
-			FIFO_TO_SM(PNX8XXX_UART_FIFO_RXPAR);
-	if (termios->c_iflag & (IGNBRK | BRKINT | PARMRK))
-		sport->port.read_status_mask |=
-			ISTAT_TO_SM(PNX8XXX_UART_INT_BREAK);
-
-	/*
-	 * Characters to ignore
-	 */
-	sport->port.ignore_status_mask = 0;
-	if (termios->c_iflag & IGNPAR)
-		sport->port.ignore_status_mask |=
-			FIFO_TO_SM(PNX8XXX_UART_FIFO_RXFE) |
-			FIFO_TO_SM(PNX8XXX_UART_FIFO_RXPAR);
-	if (termios->c_iflag & IGNBRK) {
-		sport->port.ignore_status_mask |=
-			ISTAT_TO_SM(PNX8XXX_UART_INT_BREAK);
-		/*
-		 * If we're ignoring parity and break indicators,
-		 * ignore overruns too (for real raw support).
-		 */
-		if (termios->c_iflag & IGNPAR)
-			sport->port.ignore_status_mask |=
-				ISTAT_TO_SM(PNX8XXX_UART_INT_RXOVRN);
-	}
-
-	/*
-	 * ignore all characters if CREAD is not set
-	 */
-	if ((termios->c_cflag & CREAD) == 0)
-		sport->port.ignore_status_mask |=
-			ISTAT_TO_SM(PNX8XXX_UART_INT_RX);
-
-	del_timer_sync(&sport->timer);
-
-	/*
-	 * Update the per-port timeout.
-	 */
-	uart_update_timeout(port, termios->c_cflag, baud);
-
-	/*
-	 * disable interrupts and drain transmitter
-	 */
-	old_ien = serial_in(sport, PNX8XXX_IEN);
-	serial_out(sport, PNX8XXX_IEN, old_ien & ~(PNX8XXX_UART_INT_ALLTX |
-					PNX8XXX_UART_INT_ALLRX));
-
-	while (serial_in(sport, PNX8XXX_FIFO) & PNX8XXX_UART_FIFO_TXFIFO_STA)
-		barrier();
-
-	/* then, disable everything */
-	serial_out(sport, PNX8XXX_IEN, 0);
-
-	/* Reset the Rx and Tx FIFOs too */
-	lcr_fcr |= PNX8XXX_UART_LCR_TX_RST;
-	lcr_fcr |= PNX8XXX_UART_LCR_RX_RST;
-
-	/* set the parity, stop bits and data size */
-	serial_out(sport, PNX8XXX_LCR, lcr_fcr);
-
-	/* set the baud rate */
-	quot -= 1;
-	serial_out(sport, PNX8XXX_BAUD, quot);
-
-	serial_out(sport, PNX8XXX_ICLR, -1);
-
-	serial_out(sport, PNX8XXX_IEN, old_ien);
-
-	if (UART_ENABLE_MS(&sport->port, termios->c_cflag))
-		pnx8xxx_enable_ms(&sport->port);
-
-	spin_unlock_irqrestore(&sport->port.lock, flags);
-}
-
-static const char *pnx8xxx_type(struct uart_port *port)
-{
-	struct pnx8xxx_port *sport =
-		container_of(port, struct pnx8xxx_port, port);
-
-	return sport->port.type == PORT_PNX8XXX ? "PNX8XXX" : NULL;
-}
-
-/*
- * Release the memory region(s) being used by 'port'.
- */
-static void pnx8xxx_release_port(struct uart_port *port)
-{
-	struct pnx8xxx_port *sport =
-		container_of(port, struct pnx8xxx_port, port);
-
-	release_mem_region(sport->port.mapbase, UART_PORT_SIZE);
-}
-
-/*
- * Request the memory region(s) being used by 'port'.
- */
-static int pnx8xxx_request_port(struct uart_port *port)
-{
-	struct pnx8xxx_port *sport =
-		container_of(port, struct pnx8xxx_port, port);
-	return request_mem_region(sport->port.mapbase, UART_PORT_SIZE,
-			"pnx8xxx-uart") != NULL ? 0 : -EBUSY;
-}
-
-/*
- * Configure/autoconfigure the port.
- */
-static void pnx8xxx_config_port(struct uart_port *port, int flags)
-{
-	struct pnx8xxx_port *sport =
-		container_of(port, struct pnx8xxx_port, port);
-
-	if (flags & UART_CONFIG_TYPE &&
-	    pnx8xxx_request_port(&sport->port) == 0)
-		sport->port.type = PORT_PNX8XXX;
-}
-
-/*
- * Verify the new serial_struct (for TIOCSSERIAL).
- * The only change we allow are to the flags and type, and
- * even then only between PORT_PNX8XXX and PORT_UNKNOWN
- */
-static int
-pnx8xxx_verify_port(struct uart_port *port, struct serial_struct *ser)
-{
-	struct pnx8xxx_port *sport =
-		container_of(port, struct pnx8xxx_port,	port);
-	int ret = 0;
-
-	if (ser->type != PORT_UNKNOWN && ser->type != PORT_PNX8XXX)
-		ret = -EINVAL;
-	if (sport->port.irq != ser->irq)
-		ret = -EINVAL;
-	if (ser->io_type != SERIAL_IO_MEM)
-		ret = -EINVAL;
-	if (sport->port.uartclk / 16 != ser->baud_base)
-		ret = -EINVAL;
-	if ((void *)sport->port.mapbase != ser->iomem_base)
-		ret = -EINVAL;
-	if (sport->port.iobase != ser->port)
-		ret = -EINVAL;
-	if (ser->hub6 != 0)
-		ret = -EINVAL;
-	return ret;
-}
-
-static const struct uart_ops pnx8xxx_pops = {
-	.tx_empty	= pnx8xxx_tx_empty,
-	.set_mctrl	= pnx8xxx_set_mctrl,
-	.get_mctrl	= pnx8xxx_get_mctrl,
-	.stop_tx	= pnx8xxx_stop_tx,
-	.start_tx	= pnx8xxx_start_tx,
-	.stop_rx	= pnx8xxx_stop_rx,
-	.enable_ms	= pnx8xxx_enable_ms,
-	.break_ctl	= pnx8xxx_break_ctl,
-	.startup	= pnx8xxx_startup,
-	.shutdown	= pnx8xxx_shutdown,
-	.set_termios	= pnx8xxx_set_termios,
-	.type		= pnx8xxx_type,
-	.release_port	= pnx8xxx_release_port,
-	.request_port	= pnx8xxx_request_port,
-	.config_port	= pnx8xxx_config_port,
-	.verify_port	= pnx8xxx_verify_port,
-};
-
-
-/*
- * Setup the PNX8XXX serial ports.
- *
- * Note also that we support "console=ttySx" where "x" is either 0 or 1.
- */
-static void __init pnx8xxx_init_ports(void)
-{
-	static int first = 1;
-	int i;
-
-	if (!first)
-		return;
-	first = 0;
-
-	for (i = 0; i < NR_PORTS; i++) {
-		timer_setup(&pnx8xxx_ports[i].timer, pnx8xxx_timeout, 0);
-		pnx8xxx_ports[i].port.ops = &pnx8xxx_pops;
-	}
-}
-
-#ifdef CONFIG_SERIAL_PNX8XXX_CONSOLE
-
-static void pnx8xxx_console_putchar(struct uart_port *port, int ch)
-{
-	struct pnx8xxx_port *sport =
-		container_of(port, struct pnx8xxx_port, port);
-	int status;
-
-	do {
-		/* Wait for UART_TX register to empty */
-		status = serial_in(sport, PNX8XXX_FIFO);
-	} while (status & PNX8XXX_UART_FIFO_TXFIFO);
-	serial_out(sport, PNX8XXX_FIFO, ch);
-}
-
-/*
- * Interrupts are disabled on entering
- */static void
-pnx8xxx_console_write(struct console *co, const char *s, unsigned int count)
-{
-	struct pnx8xxx_port *sport = &pnx8xxx_ports[co->index];
-	unsigned int old_ien, status;
-
-	/*
-	 *	First, save IEN and then disable interrupts
-	 */
-	old_ien = serial_in(sport, PNX8XXX_IEN);
-	serial_out(sport, PNX8XXX_IEN, old_ien & ~(PNX8XXX_UART_INT_ALLTX |
-					PNX8XXX_UART_INT_ALLRX));
-
-	uart_console_write(&sport->port, s, count, pnx8xxx_console_putchar);
-
-	/*
-	 *	Finally, wait for transmitter to become empty
-	 *	and restore IEN
-	 */
-	do {
-		/* Wait for UART_TX register to empty */
-		status = serial_in(sport, PNX8XXX_FIFO);
-	} while (status & PNX8XXX_UART_FIFO_TXFIFO);
-
-	/* Clear TX and EMPTY interrupt */
-	serial_out(sport, PNX8XXX_ICLR, PNX8XXX_UART_INT_TX |
-			     PNX8XXX_UART_INT_EMPTY);
-
-	serial_out(sport, PNX8XXX_IEN, old_ien);
-}
-
-static int __init
-pnx8xxx_console_setup(struct console *co, char *options)
-{
-	struct pnx8xxx_port *sport;
-	int baud = 38400;
-	int bits = 8;
-	int parity = 'n';
-	int flow = 'n';
-
-	/*
-	 * Check whether an invalid uart number has been specified, and
-	 * if so, search for the first available port that does have
-	 * console support.
-	 */
-	if (co->index == -1 || co->index >= NR_PORTS)
-		co->index = 0;
-	sport = &pnx8xxx_ports[co->index];
-
-	if (options)
-		uart_parse_options(options, &baud, &parity, &bits, &flow);
-
-	return uart_set_options(&sport->port, co, baud, parity, bits, flow);
-}
-
-static struct uart_driver pnx8xxx_reg;
-static struct console pnx8xxx_console = {
-	.name		= "ttyS",
-	.write		= pnx8xxx_console_write,
-	.device		= uart_console_device,
-	.setup		= pnx8xxx_console_setup,
-	.flags		= CON_PRINTBUFFER,
-	.index		= -1,
-	.data		= &pnx8xxx_reg,
-};
-
-static int __init pnx8xxx_rs_console_init(void)
-{
-	pnx8xxx_init_ports();
-	register_console(&pnx8xxx_console);
-	return 0;
-}
-console_initcall(pnx8xxx_rs_console_init);
-
-#define PNX8XXX_CONSOLE	&pnx8xxx_console
-#else
-#define PNX8XXX_CONSOLE	NULL
-#endif
-
-static struct uart_driver pnx8xxx_reg = {
-	.owner			= THIS_MODULE,
-	.driver_name		= "ttyS",
-	.dev_name		= "ttyS",
-	.major			= SERIAL_PNX8XXX_MAJOR,
-	.minor			= MINOR_START,
-	.nr			= NR_PORTS,
-	.cons			= PNX8XXX_CONSOLE,
-};
-
-static int pnx8xxx_serial_suspend(struct platform_device *pdev, pm_message_t state)
-{
-	struct pnx8xxx_port *sport = platform_get_drvdata(pdev);
-
-	return uart_suspend_port(&pnx8xxx_reg, &sport->port);
-}
-
-static int pnx8xxx_serial_resume(struct platform_device *pdev)
-{
-	struct pnx8xxx_port *sport = platform_get_drvdata(pdev);
-
-	return uart_resume_port(&pnx8xxx_reg, &sport->port);
-}
-
-static int pnx8xxx_serial_probe(struct platform_device *pdev)
-{
-	struct resource *res = pdev->resource;
-	int i;
-
-	for (i = 0; i < pdev->num_resources; i++, res++) {
-		if (!(res->flags & IORESOURCE_MEM))
-			continue;
-
-		for (i = 0; i < NR_PORTS; i++) {
-			if (pnx8xxx_ports[i].port.mapbase != res->start)
-				continue;
-
-			pnx8xxx_ports[i].port.has_sysrq = IS_ENABLED(CONFIG_SERIAL_PNX8XXX_CONSOLE);
-			pnx8xxx_ports[i].port.dev = &pdev->dev;
-			uart_add_one_port(&pnx8xxx_reg, &pnx8xxx_ports[i].port);
-			platform_set_drvdata(pdev, &pnx8xxx_ports[i]);
-			break;
-		}
-	}
-
-	return 0;
-}
-
-static int pnx8xxx_serial_remove(struct platform_device *pdev)
-{
-	struct pnx8xxx_port *sport = platform_get_drvdata(pdev);
-
-	if (sport)
-		uart_remove_one_port(&pnx8xxx_reg, &sport->port);
-
-	return 0;
-}
-
-static struct platform_driver pnx8xxx_serial_driver = {
-	.driver		= {
-		.name	= "pnx8xxx-uart",
-	},
-	.probe		= pnx8xxx_serial_probe,
-	.remove		= pnx8xxx_serial_remove,
-	.suspend	= pnx8xxx_serial_suspend,
-	.resume		= pnx8xxx_serial_resume,
-};
-
-static int __init pnx8xxx_serial_init(void)
-{
-	int ret;
-
-	printk(KERN_INFO "Serial: PNX8XXX driver\n");
-
-	pnx8xxx_init_ports();
-
-	ret = uart_register_driver(&pnx8xxx_reg);
-	if (ret == 0) {
-		ret = platform_driver_register(&pnx8xxx_serial_driver);
-		if (ret)
-			uart_unregister_driver(&pnx8xxx_reg);
-	}
-	return ret;
-}
-
-static void __exit pnx8xxx_serial_exit(void)
-{
-	platform_driver_unregister(&pnx8xxx_serial_driver);
-	uart_unregister_driver(&pnx8xxx_reg);
-}
-
-module_init(pnx8xxx_serial_init);
-module_exit(pnx8xxx_serial_exit);
-
-MODULE_AUTHOR("Embedded Alley Solutions, Inc.");
-MODULE_DESCRIPTION("PNX8XXX SoCs serial port driver");
-MODULE_LICENSE("GPL");
-MODULE_ALIAS_CHARDEV_MAJOR(SERIAL_PNX8XXX_MAJOR);
-MODULE_ALIAS("platform:pnx8xxx-uart");