Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net

Mostly simple cases of overlapping changes (adding code nearby,
a function whose name changes, for example).

Signed-off-by: David S. Miller <davem@davemloft.net>

7 files changed, 65 insertions, 80 deletions

diff --git a/drivers/tty/serial/8250/8250_dw.c b/drivers/tty/serial/8250/8250_dw.c
index 6ee55a2d47bb..e65808c482f1 100644
--- a/drivers/tty/serial/8250/8250_dw.c
+++ b/drivers/tty/serial/8250/8250_dw.c
@@ -257,7 +257,7 @@ static void dw8250_set_termios(struct uart_port *p, struct ktermios *termios,
 {
 	unsigned int baud = tty_termios_baud_rate(termios);
 	struct dw8250_data *d = p->private_data;
-	unsigned int rate;
+	long rate;
 	int ret;
 
 	if (IS_ERR(d->clk) || !old)
@@ -265,7 +265,12 @@ static void dw8250_set_termios(struct uart_port *p, struct ktermios *termios,
 
 	clk_disable_unprepare(d->clk);
 	rate = clk_round_rate(d->clk, baud * 16);
-	ret = clk_set_rate(d->clk, rate);
+	if (rate < 0)
+		ret = rate;
+	else if (rate == 0)
+		ret = -ENOENT;
+	else
+		ret = clk_set_rate(d->clk, rate);
 	clk_prepare_enable(d->clk);
 
 	if (!ret)
diff --git a/drivers/tty/serial/8250/Kconfig b/drivers/tty/serial/8250/Kconfig
index a65fb8197aec..0e3f529d50e9 100644
--- a/drivers/tty/serial/8250/Kconfig
+++ b/drivers/tty/serial/8250/Kconfig
@@ -128,9 +128,13 @@ config SERIAL_8250_PCI
 	  by the parport_serial driver, enabled with CONFIG_PARPORT_SERIAL.
 
 config SERIAL_8250_EXAR
-        tristate "8250/16550 PCI device support"
-        depends on SERIAL_8250_PCI
+	tristate "8250/16550 Exar/Commtech PCI/PCIe device support"
+	depends on SERIAL_8250_PCI
 	default SERIAL_8250
+	help
+	  This builds support for XR17C1xx, XR17V3xx and some Commtech
+	  422x PCIe serial cards that are not covered by the more generic
+	  SERIAL_8250_PCI option.
 
 config SERIAL_8250_HP300
 	tristate
diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c
index 8789ea423ccf..b0a377725d63 100644
--- a/drivers/tty/serial/amba-pl011.c
+++ b/drivers/tty/serial/amba-pl011.c
@@ -2373,7 +2373,7 @@ static int __init pl011_console_match(struct console *co, char *name, int idx,
 	if (strcmp(name, "qdf2400_e44") == 0) {
 		pr_info_once("UART: Working around QDF2400 SoC erratum 44");
 		qdf2400_e44_present = true;
-	} else if (strcmp(name, "pl011") != 0 || strcmp(name, "ttyAMA") != 0) {
+	} else if (strcmp(name, "pl011") != 0) {
 		return -ENODEV;
 	}
 
@@ -2452,18 +2452,37 @@ static void pl011_early_write(struct console *con, const char *s, unsigned n)
 	uart_console_write(&dev->port, s, n, pl011_putc);
 }
 
+/*
+ * On non-ACPI systems, earlycon is enabled by specifying
+ * "earlycon=pl011,<address>" on the kernel command line.
+ *
+ * On ACPI ARM64 systems, an "early" console is enabled via the SPCR table,
+ * by specifying only "earlycon" on the command line.  Because it requires
+ * SPCR, the console starts after ACPI is parsed, which is later than a
+ * traditional early console.
+ *
+ * To get the traditional early console that starts before ACPI is parsed,
+ * specify the full "earlycon=pl011,<address>" option.
+ */
 static int __init pl011_early_console_setup(struct earlycon_device *device,
 					    const char *opt)
 {
 	if (!device->port.membase)
 		return -ENODEV;
 
-	device->con->write = qdf2400_e44_present ?
-				qdf2400_e44_early_write : pl011_early_write;
+	/* On QDF2400 SOCs affected by Erratum 44, the "qdf2400_e44" must
+	 * also be specified, e.g. "earlycon=pl011,<address>,qdf2400_e44".
+	 */
+	if (!strcmp(device->options, "qdf2400_e44"))
+		device->con->write = qdf2400_e44_early_write;
+	else
+		device->con->write = pl011_early_write;
+
 	return 0;
 }
 OF_EARLYCON_DECLARE(pl011, "arm,pl011", pl011_early_console_setup);
 OF_EARLYCON_DECLARE(pl011, "arm,sbsa-uart", pl011_early_console_setup);
+EARLYCON_DECLARE(qdf2400_e44, pl011_early_console_setup);
 
 #else
 #define AMBA_CONSOLE	NULL
diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c
index dcebb28ffbc4..1f50a83ef958 100644
--- a/drivers/tty/serial/atmel_serial.c
+++ b/drivers/tty/serial/atmel_serial.c
@@ -1951,6 +1951,11 @@ static void atmel_flush_buffer(struct uart_port *port)
 		atmel_uart_writel(port, ATMEL_PDC_TCR, 0);
 		atmel_port->pdc_tx.ofs = 0;
 	}
+	/*
+	 * in uart_flush_buffer(), the xmit circular buffer has just
+	 * been cleared, so we have to reset tx_len accordingly.
+	 */
+	atmel_port->tx_len = 0;
 }
 
 /*
@@ -2483,6 +2488,9 @@ static void atmel_console_write(struct console *co, const char *s, u_int count)
 	pdc_tx = atmel_uart_readl(port, ATMEL_PDC_PTSR) & ATMEL_PDC_TXTEN;
 	atmel_uart_writel(port, ATMEL_PDC_PTCR, ATMEL_PDC_TXTDIS);
 
+	/* Make sure that tx path is actually able to send characters */
+	atmel_uart_writel(port, ATMEL_US_CR, ATMEL_US_TXEN);
+
 	uart_console_write(port, s, count, atmel_console_putchar);
 
 	/*
diff --git a/drivers/tty/serial/mxs-auart.c b/drivers/tty/serial/mxs-auart.c
index 6989b227d134..be94246b6fcc 100644
--- a/drivers/tty/serial/mxs-auart.c
+++ b/drivers/tty/serial/mxs-auart.c
@@ -1088,7 +1088,7 @@ static void mxs_auart_settermios(struct uart_port *u,
 					AUART_LINECTRL_BAUD_DIV_MAX);
 		baud_max = u->uartclk * 32 / AUART_LINECTRL_BAUD_DIV_MIN;
 		baud = uart_get_baud_rate(u, termios, old, baud_min, baud_max);
-		div = u->uartclk * 32 / baud;
+		div = DIV_ROUND_CLOSEST(u->uartclk * 32, baud);
 	}
 
 	ctrl |= AUART_LINECTRL_BAUD_DIVFRAC(div & 0x3F);
diff --git a/drivers/tty/tty_ldisc.c b/drivers/tty/tty_ldisc.c
index 68947f6de5ad..b0500a0a87b8 100644
--- a/drivers/tty/tty_ldisc.c
+++ b/drivers/tty/tty_ldisc.c
@@ -271,10 +271,13 @@ const struct file_operations tty_ldiscs_proc_fops = {
 
 struct tty_ldisc *tty_ldisc_ref_wait(struct tty_struct *tty)
 {
+	struct tty_ldisc *ld;
+
 	ldsem_down_read(&tty->ldisc_sem, MAX_SCHEDULE_TIMEOUT);
-	if (!tty->ldisc)
+	ld = tty->ldisc;
+	if (!ld)
 		ldsem_up_read(&tty->ldisc_sem);
-	return tty->ldisc;
+	return ld;
 }
 EXPORT_SYMBOL_GPL(tty_ldisc_ref_wait);
 
@@ -489,41 +492,6 @@ static void tty_ldisc_close(struct tty_struct *tty, struct tty_ldisc *ld)
 }
 
 /**
- *	tty_ldisc_restore	-	helper for tty ldisc change
- *	@tty: tty to recover
- *	@old: previous ldisc
- *
- *	Restore the previous line discipline or N_TTY when a line discipline
- *	change fails due to an open error
- */
-
-static void tty_ldisc_restore(struct tty_struct *tty, struct tty_ldisc *old)
-{
-	struct tty_ldisc *new_ldisc;
-	int r;
-
-	/* There is an outstanding reference here so this is safe */
-	old = tty_ldisc_get(tty, old->ops->num);
-	WARN_ON(IS_ERR(old));
-	tty->ldisc = old;
-	tty_set_termios_ldisc(tty, old->ops->num);
-	if (tty_ldisc_open(tty, old) < 0) {
-		tty_ldisc_put(old);
-		/* This driver is always present */
-		new_ldisc = tty_ldisc_get(tty, N_TTY);
-		if (IS_ERR(new_ldisc))
-			panic("n_tty: get");
-		tty->ldisc = new_ldisc;
-		tty_set_termios_ldisc(tty, N_TTY);
-		r = tty_ldisc_open(tty, new_ldisc);
-		if (r < 0)
-			panic("Couldn't open N_TTY ldisc for "
-			      "%s --- error %d.",
-			      tty_name(tty), r);
-	}
-}
-
-/**
  *	tty_set_ldisc		-	set line discipline
  *	@tty: the terminal to set
  *	@ldisc: the line discipline
@@ -536,12 +504,7 @@ static void tty_ldisc_restore(struct tty_struct *tty, struct tty_ldisc *old)
 
 int tty_set_ldisc(struct tty_struct *tty, int disc)
 {
-	int retval;
-	struct tty_ldisc *old_ldisc, *new_ldisc;
-
-	new_ldisc = tty_ldisc_get(tty, disc);
-	if (IS_ERR(new_ldisc))
-		return PTR_ERR(new_ldisc);
+	int retval, old_disc;
 
 	tty_lock(tty);
 	retval = tty_ldisc_lock(tty, 5 * HZ);
@@ -554,7 +517,8 @@ int tty_set_ldisc(struct tty_struct *tty, int disc)
 	}
 
 	/* Check the no-op case */
-	if (tty->ldisc->ops->num == disc)
+	old_disc = tty->ldisc->ops->num;
+	if (old_disc == disc)
 		goto out;
 
 	if (test_bit(TTY_HUPPED, &tty->flags)) {
@@ -563,34 +527,25 @@ int tty_set_ldisc(struct tty_struct *tty, int disc)
 		goto out;
 	}
 
-	old_ldisc = tty->ldisc;
-
-	/* Shutdown the old discipline. */
-	tty_ldisc_close(tty, old_ldisc);
-
-	/* Now set up the new line discipline. */
-	tty->ldisc = new_ldisc;
-	tty_set_termios_ldisc(tty, disc);
-
-	retval = tty_ldisc_open(tty, new_ldisc);
+	retval = tty_ldisc_reinit(tty, disc);
 	if (retval < 0) {
 		/* Back to the old one or N_TTY if we can't */
-		tty_ldisc_put(new_ldisc);
-		tty_ldisc_restore(tty, old_ldisc);
+		if (tty_ldisc_reinit(tty, old_disc) < 0) {
+			pr_err("tty: TIOCSETD failed, reinitializing N_TTY\n");
+			if (tty_ldisc_reinit(tty, N_TTY) < 0) {
+				/* At this point we have tty->ldisc == NULL. */
+				pr_err("tty: reinitializing N_TTY failed\n");
+			}
+		}
 	}
 
-	if (tty->ldisc->ops->num != old_ldisc->ops->num && tty->ops->set_ldisc) {
+	if (tty->ldisc && tty->ldisc->ops->num != old_disc &&
+	    tty->ops->set_ldisc) {
 		down_read(&tty->termios_rwsem);
 		tty->ops->set_ldisc(tty);
 		up_read(&tty->termios_rwsem);
 	}
 
-	/* At this point we hold a reference to the new ldisc and a
-	   reference to the old ldisc, or we hold two references to
-	   the old ldisc (if it was restored as part of error cleanup
-	   above). In either case, releasing a single reference from
-	   the old ldisc is correct. */
-	new_ldisc = old_ldisc;
 out:
 	tty_ldisc_unlock(tty);
 
@@ -598,7 +553,6 @@ out:
 	   already running */
 	tty_buffer_restart_work(tty->port);
 err:
-	tty_ldisc_put(new_ldisc);	/* drop the extra reference */
 	tty_unlock(tty);
 	return retval;
 }
@@ -659,10 +613,8 @@ int tty_ldisc_reinit(struct tty_struct *tty, int disc)
 	int retval;
 
 	ld = tty_ldisc_get(tty, disc);
-	if (IS_ERR(ld)) {
-		BUG_ON(disc == N_TTY);
+	if (IS_ERR(ld))
 		return PTR_ERR(ld);
-	}
 
 	if (tty->ldisc) {
 		tty_ldisc_close(tty, tty->ldisc);
@@ -674,10 +626,8 @@ int tty_ldisc_reinit(struct tty_struct *tty, int disc)
 	tty_set_termios_ldisc(tty, disc);
 	retval = tty_ldisc_open(tty, tty->ldisc);
 	if (retval) {
-		if (!WARN_ON(disc == N_TTY)) {
-			tty_ldisc_put(tty->ldisc);
-			tty->ldisc = NULL;
-		}
+		tty_ldisc_put(tty->ldisc);
+		tty->ldisc = NULL;
 	}
 	return retval;
 }
diff --git a/drivers/tty/vt/keyboard.c b/drivers/tty/vt/keyboard.c
index c5f0fc906136..8af8d9542663 100644
--- a/drivers/tty/vt/keyboard.c
+++ b/drivers/tty/vt/keyboard.c
@@ -28,7 +28,6 @@
 #include <linux/module.h>
 #include <linux/sched/signal.h>
 #include <linux/sched/debug.h>
-#include <linux/sched/debug.h>
 #include <linux/tty.h>
 #include <linux/tty_flip.h>
 #include <linux/mm.h>