diff options
| author | Arnd Bergmann <arnd@arndb.de> | 2021-11-22 23:22:00 +0100 |
|---|---|---|
| committer | Vinod Koul <vkoul@kernel.org> | 2021-12-17 11:23:56 +0530 |
| commit | 03de6b273805b3c552ff158f8688555937375926 (patch) | |
| tree | 21ff357eeca75b587137622c2618d9a23f9ba139 /drivers/tty/serial/msm_serial.c | |
| parent | 722d6d2bdcc2dcff5527c704fb8f2bbcb018a232 (diff) | |
dmaengine: qcom-adm: stop abusing slave_id config
The slave_id was previously used to pick one DMA slave instead of another,
but this is now done through the DMA descriptors in device tree.
For the qcom_adm driver, the configuration is documented in the DT
binding to contain a tuple of device identifier and a "crci" field,
but the implementation ends up using only a single cell for identifying
the slave, with the crci getting passed in nonstandard properties of
the device, and passed through the dma driver using the old slave_id
field. Part of the problem apparently is that the nand driver ends up
using only a single DMA request ID, but requires distinct values for
"crci" depending on the type of transfer.
Change both the dmaengine driver and the two slave drivers to allow
the documented binding to work in addition to the ad-hoc passing
of crci values. In order to no longer abuse the slave_id field, pass
the data using the "peripheral_config" mechanism instead.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20211122222203.4103644-9-arnd@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Diffstat (limited to 'drivers/tty/serial/msm_serial.c')
| -rw-r--r-- | drivers/tty/serial/msm_serial.c | 15 |
1 files changed, 13 insertions, 2 deletions
diff --git a/drivers/tty/serial/msm_serial.c b/drivers/tty/serial/msm_serial.c index fcef7a961430..c6be09f44dc1 100644 --- a/drivers/tty/serial/msm_serial.c +++ b/drivers/tty/serial/msm_serial.c @@ -9,6 +9,7 @@ #include <linux/kernel.h> #include <linux/atomic.h> +#include <linux/dma/qcom_adm.h> #include <linux/dma-mapping.h> #include <linux/dmaengine.h> #include <linux/module.h> @@ -290,6 +291,7 @@ static void msm_request_tx_dma(struct msm_port *msm_port, resource_size_t base) { struct device *dev = msm_port->uart.dev; struct dma_slave_config conf; + struct qcom_adm_peripheral_config periph_conf = {}; struct msm_dma *dma; u32 crci = 0; int ret; @@ -308,7 +310,11 @@ static void msm_request_tx_dma(struct msm_port *msm_port, resource_size_t base) conf.device_fc = true; conf.dst_addr = base + UARTDM_TF; conf.dst_maxburst = UARTDM_BURST_SIZE; - conf.slave_id = crci; + if (crci) { + conf.peripheral_config = &periph_conf; + conf.peripheral_size = sizeof(periph_conf); + periph_conf.crci = crci; + } ret = dmaengine_slave_config(dma->chan, &conf); if (ret) @@ -333,6 +339,7 @@ static void msm_request_rx_dma(struct msm_port *msm_port, resource_size_t base) { struct device *dev = msm_port->uart.dev; struct dma_slave_config conf; + struct qcom_adm_peripheral_config periph_conf = {}; struct msm_dma *dma; u32 crci = 0; int ret; @@ -355,7 +362,11 @@ static void msm_request_rx_dma(struct msm_port *msm_port, resource_size_t base) conf.device_fc = true; conf.src_addr = base + UARTDM_RF; conf.src_maxburst = UARTDM_BURST_SIZE; - conf.slave_id = crci; + if (crci) { + conf.peripheral_config = &periph_conf; + conf.peripheral_size = sizeof(periph_conf); + periph_conf.crci = crci; + } ret = dmaengine_slave_config(dma->chan, &conf); if (ret) |