summaryrefslogtreecommitdiff
path: root/drivers/staging
diff options
context:
space:
mode:
authorHans de Goede <hdegoede@redhat.com>2023-01-15 22:03:19 +0100
committerMauro Carvalho Chehab <mchehab@kernel.org>2023-02-08 08:24:34 +0100
commitb7e155e16601b0c6f34e3345b9eca6a2efc5bc5d (patch)
tree85e5e92d7e52cf27b5a1efc4038e12cd1e9c0730 /drivers/staging
parente98b8993bfffbe552b7881bd9b7450f10f3bb9d3 (diff)
media: atomisp: ov2680: Switch over to ACPI powermanagement
The DSDT of all Windows BYT / CHT devices which I have seen has proper ACPI powermagement for the clk and regulators used by the sensors. So there is no need for the whole custom atomisp_gmin custom code to disable the ACPI pm and directly poke at the PMIC for this. Replace all the atomisp_gmin usage with using the new atomisp_register_sensor_no_gmin() / atomisp_unregister_subdev() helpers which allow registering a sensor with the atomisp code without using any of the atomisp_gmin power-management code. Note eventually these calls should be replaced by the standard v4l2_async_register_subdev_sensor() mechanism. But this first requires a bunch of work to the atomisp main code to make it set the necessary fwnodes up, similar to how drivers/media/pci/intel/ipu3/cio2-bridge.c does this. This has been tested on: -Trekstor Surftab duo W1 10.1, CHT, AXP288 PMIC, 2x ov2680 sensor -Asus T101HA, CHT, TI PMIC, 1x ov2680 sensor -MPMAN Converter 9, BYT, AXP288 PMIC, ov2680 back, gc0310 front sensor Reviewed-by: Andy Shevchenko <andy@kernel.org> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Diffstat (limited to 'drivers/staging')
-rw-r--r--drivers/staging/media/atomisp/i2c/atomisp-ov2680.c231
-rw-r--r--drivers/staging/media/atomisp/i2c/ov2680.h3
2 files changed, 53 insertions, 181 deletions
diff --git a/drivers/staging/media/atomisp/i2c/atomisp-ov2680.c b/drivers/staging/media/atomisp/i2c/atomisp-ov2680.c
index 06df78d46689..aeb38599fe13 100644
--- a/drivers/staging/media/atomisp/i2c/atomisp-ov2680.c
+++ b/drivers/staging/media/atomisp/i2c/atomisp-ov2680.c
@@ -17,6 +17,8 @@
#include <linux/acpi.h>
#include <linux/device.h>
+#include <linux/gpio/consumer.h>
+#include <linux/gpio/machine.h>
#include <linux/i2c.h>
#include <linux/module.h>
#include <linux/pm_runtime.h>
@@ -185,145 +187,6 @@ static int ov2680_init_registers(struct v4l2_subdev *sd)
return ret;
}
-static int power_ctrl(struct v4l2_subdev *sd, bool flag)
-{
- int ret = 0;
- struct ov2680_device *dev = to_ov2680_sensor(sd);
- struct i2c_client *client = v4l2_get_subdevdata(sd);
-
- if (!dev || !dev->platform_data)
- return -ENODEV;
-
- dev_dbg(&client->dev, "%s: %s", __func__, flag ? "on" : "off");
-
- if (flag) {
- ret |= dev->platform_data->v1p8_ctrl(sd, 1);
- ret |= dev->platform_data->v2p8_ctrl(sd, 1);
- usleep_range(10000, 15000);
- }
-
- if (!flag || ret) {
- ret |= dev->platform_data->v1p8_ctrl(sd, 0);
- ret |= dev->platform_data->v2p8_ctrl(sd, 0);
- }
- return ret;
-}
-
-static int gpio_ctrl(struct v4l2_subdev *sd, bool flag)
-{
- int ret;
- struct ov2680_device *dev = to_ov2680_sensor(sd);
-
- if (!dev || !dev->platform_data)
- return -ENODEV;
-
- /*
- * The OV2680 documents only one GPIO input (#XSHUTDN), but
- * existing integrations often wire two (reset/power_down)
- * because that is the way other sensors work. There is no
- * way to tell how it is wired internally, so existing
- * firmwares expose both and we drive them symmetrically.
- */
- if (flag) {
- ret = dev->platform_data->gpio0_ctrl(sd, 1);
- usleep_range(10000, 15000);
- /* Ignore return from second gpio, it may not be there */
- dev->platform_data->gpio1_ctrl(sd, 1);
- usleep_range(10000, 15000);
- } else {
- dev->platform_data->gpio1_ctrl(sd, 0);
- ret = dev->platform_data->gpio0_ctrl(sd, 0);
- }
- return ret;
-}
-
-static int power_up(struct v4l2_subdev *sd)
-{
- struct ov2680_device *dev = to_ov2680_sensor(sd);
- struct i2c_client *client = v4l2_get_subdevdata(sd);
- int ret;
-
- if (!dev->platform_data) {
- dev_err(&client->dev,
- "no camera_sensor_platform_data");
- return -ENODEV;
- }
-
- /* power control */
- ret = power_ctrl(sd, 1);
- if (ret)
- goto fail_power;
-
- /* according to DS, at least 5ms is needed between DOVDD and PWDN */
- usleep_range(5000, 6000);
-
- /* gpio ctrl */
- ret = gpio_ctrl(sd, 1);
- if (ret) {
- ret = gpio_ctrl(sd, 1);
- if (ret)
- goto fail_power;
- }
-
- /* flis clock control */
- ret = dev->platform_data->flisclk_ctrl(sd, 1);
- if (ret)
- goto fail_clk;
-
- /* according to DS, 20ms is needed between PWDN and i2c access */
- msleep(20);
-
- ret = ov2680_init_registers(sd);
- if (ret)
- goto fail_init_registers;
-
- return 0;
-
-fail_init_registers:
- dev->platform_data->flisclk_ctrl(sd, 0);
-fail_clk:
- gpio_ctrl(sd, 0);
-fail_power:
- power_ctrl(sd, 0);
- dev_err(&client->dev, "sensor power-up failed\n");
-
- return ret;
-}
-
-static int power_down(struct v4l2_subdev *sd)
-{
- struct ov2680_device *dev = to_ov2680_sensor(sd);
- struct i2c_client *client = v4l2_get_subdevdata(sd);
- int ret = 0;
-
- if (!dev->platform_data) {
- dev_err(&client->dev,
- "no camera_sensor_platform_data");
- return -ENODEV;
- }
-
- ret = dev->platform_data->flisclk_ctrl(sd, 0);
- if (ret)
- dev_err(&client->dev, "flisclk failed\n");
-
- /* gpio ctrl */
- ret = gpio_ctrl(sd, 0);
- if (ret) {
- ret = gpio_ctrl(sd, 0);
- if (ret)
- dev_err(&client->dev, "gpio failed 2\n");
- }
-
- /* power control */
- ret = power_ctrl(sd, 0);
- if (ret) {
- dev_err(&client->dev, "vprog failed.\n");
- return ret;
- }
-
- return 0;
-}
-
static struct v4l2_mbus_framefmt *
__ov2680_get_pad_format(struct ov2680_device *sensor,
struct v4l2_subdev_state *state,
@@ -588,20 +451,10 @@ error_unlock:
return ret;
}
-static int ov2680_s_config(struct v4l2_subdev *sd,
- int irq, void *platform_data)
+static int ov2680_s_config(struct v4l2_subdev *sd)
{
- struct ov2680_device *sensor = to_ov2680_sensor(sd);
struct i2c_client *client = v4l2_get_subdevdata(sd);
- int ret = 0;
-
- if (!platform_data)
- return -ENODEV;
-
- sensor->platform_data =
- (struct camera_sensor_platform_data *)platform_data;
-
- mutex_lock(&sensor->input_lock);
+ int ret;
ret = pm_runtime_get_sync(&client->dev);
if (ret < 0) {
@@ -609,29 +462,13 @@ static int ov2680_s_config(struct v4l2_subdev *sd,
goto fail_power_on;
}
- ret = sensor->platform_data->csi_cfg(sd, 1);
- if (ret)
- goto fail_csi_cfg;
-
/* config & detect sensor */
ret = ov2680_detect(client);
- if (ret) {
+ if (ret)
dev_err(&client->dev, "ov2680_detect err s_config.\n");
- goto fail_csi_cfg;
- }
- /* turn off sensor, after probed */
- pm_runtime_put(&client->dev);
- mutex_unlock(&sensor->input_lock);
-
- return 0;
-
-fail_csi_cfg:
- sensor->platform_data->csi_cfg(sd, 0);
fail_power_on:
pm_runtime_put(&client->dev);
- dev_err(&client->dev, "sensor power-gating failed\n");
- mutex_unlock(&sensor->input_lock);
return ret;
}
@@ -770,20 +607,33 @@ static void ov2680_remove(struct i2c_client *client)
dev_dbg(&client->dev, "ov2680_remove...\n");
- sensor->platform_data->csi_cfg(sd, 0);
-
+ atomisp_unregister_subdev(sd);
v4l2_device_unregister_subdev(sd);
media_entity_cleanup(&sensor->sd.entity);
v4l2_ctrl_handler_free(&sensor->ctrls.handler);
pm_runtime_disable(&client->dev);
}
+/*
+ * Unlike other sensors which have both a rest and powerdown input pins,
+ * the OV2680 only has a powerdown input. But some ACPI tables still list
+ * 2 GPIOs for the OV2680 and it is unclear which to use. So try to get
+ * up to 2 GPIOs (1 mandatory, 1 optional) and control them in sync.
+ */
+static const struct acpi_gpio_params ov2680_first_gpio = { 0, 0, true };
+static const struct acpi_gpio_params ov2680_second_gpio = { 1, 0, true };
+
+static const struct acpi_gpio_mapping ov2680_gpio_mapping[] = {
+ { "powerdown-gpios", &ov2680_first_gpio, 1 },
+ { "powerdown-alt-gpios", &ov2680_second_gpio, 1 },
+ { },
+};
+
static int ov2680_probe(struct i2c_client *client)
{
struct device *dev = &client->dev;
struct ov2680_device *sensor;
int ret;
- void *pdata;
sensor = devm_kzalloc(dev, sizeof(*sensor), GFP_KERNEL);
if (!sensor)
@@ -794,18 +644,24 @@ static int ov2680_probe(struct i2c_client *client)
sensor->client = client;
v4l2_i2c_subdev_init(&sensor->sd, client, &ov2680_ops);
- pdata = gmin_camera_platform_data(&sensor->sd,
- ATOMISP_INPUT_FORMAT_RAW_10,
- atomisp_bayer_order_bggr);
- if (!pdata)
- return -EINVAL;
+ ret = devm_acpi_dev_add_driver_gpios(&client->dev, ov2680_gpio_mapping);
+ if (ret)
+ return ret;
+
+ sensor->powerdown = devm_gpiod_get(dev, "powerdown", GPIOD_OUT_HIGH);
+ if (IS_ERR(sensor->powerdown))
+ return dev_err_probe(dev, PTR_ERR(sensor->powerdown), "getting powerdown GPIO\n");
+
+ sensor->powerdown_alt = devm_gpiod_get_optional(dev, "powerdown-alt", GPIOD_OUT_HIGH);
+ if (IS_ERR(sensor->powerdown_alt))
+ return dev_err_probe(dev, PTR_ERR(sensor->powerdown_alt), "getting powerdown-alt GPIO\n");
pm_runtime_set_suspended(dev);
pm_runtime_enable(dev);
pm_runtime_set_autosuspend_delay(dev, 1000);
pm_runtime_use_autosuspend(dev);
- ret = ov2680_s_config(&sensor->sd, client->irq, pdata);
+ ret = ov2680_s_config(&sensor->sd);
if (ret)
return ret;
@@ -827,7 +683,8 @@ static int ov2680_probe(struct i2c_client *client)
ov2680_fill_format(sensor, &sensor->mode.fmt, OV2680_NATIVE_WIDTH, OV2680_NATIVE_HEIGHT);
- ret = atomisp_register_i2c_module(&sensor->sd, pdata, RAW_CAMERA);
+ ret = atomisp_register_sensor_no_gmin(&sensor->sd, 1, ATOMISP_INPUT_FORMAT_RAW_10,
+ atomisp_bayer_order_bggr);
if (ret) {
ov2680_remove(client);
return ret;
@@ -839,15 +696,29 @@ static int ov2680_probe(struct i2c_client *client)
static int ov2680_suspend(struct device *dev)
{
struct v4l2_subdev *sd = dev_get_drvdata(dev);
+ struct ov2680_device *sensor = to_ov2680_sensor(sd);
- return power_down(sd);
+ gpiod_set_value_cansleep(sensor->powerdown, 1);
+ gpiod_set_value_cansleep(sensor->powerdown_alt, 1);
+ return 0;
}
static int ov2680_resume(struct device *dev)
{
struct v4l2_subdev *sd = dev_get_drvdata(dev);
+ struct ov2680_device *sensor = to_ov2680_sensor(sd);
- return power_up(sd);
+ /* according to DS, at least 5ms is needed after DOVDD (enabled by ACPI) */
+ usleep_range(5000, 6000);
+
+ gpiod_set_value_cansleep(sensor->powerdown, 0);
+ gpiod_set_value_cansleep(sensor->powerdown_alt, 0);
+
+ /* according to DS, 20ms is needed between PWDN and i2c access */
+ msleep(20);
+
+ ov2680_init_registers(sd);
+ return 0;
}
static DEFINE_RUNTIME_DEV_PM_OPS(ov2680_pm_ops, ov2680_suspend, ov2680_resume, NULL);
diff --git a/drivers/staging/media/atomisp/i2c/ov2680.h b/drivers/staging/media/atomisp/i2c/ov2680.h
index 1403255f7c31..a37af0a74a53 100644
--- a/drivers/staging/media/atomisp/i2c/ov2680.h
+++ b/drivers/staging/media/atomisp/i2c/ov2680.h
@@ -113,7 +113,8 @@ struct ov2680_device {
struct media_pad pad;
struct mutex input_lock;
struct i2c_client *client;
- struct camera_sensor_platform_data *platform_data;
+ struct gpio_desc *powerdown;
+ struct gpio_desc *powerdown_alt;
bool is_streaming;
struct ov2680_mode {