diff options
author | Vignesh R <vigneshr@ti.com> | 2017-04-11 17:22:25 +0530 |
---|---|---|
committer | Mark Brown <broonie@kernel.org> | 2017-04-21 18:03:53 +0100 |
commit | c687c46e9e4527c4b4d82bc3cca58c1b08bcfb83 (patch) | |
tree | 1e7db7fdf3adb9e07d1e528c277c84fe54f41c51 /drivers/spi/spi-ti-qspi.c | |
parent | 2bca34455b257d75080d87e800ae14afe49001bf (diff) |
spi: spi-ti-qspi: Use bounce buffer if read buffer is not DMA'ble
Flash filesystems like JFFS2, UBIFS and MTD block layer can provide
vmalloc'd or kmap'd buffers that cannot be mapped using dma_map_sg() and
can potentially be in memory region above 32bit addressable region(ie
buffers belonging to memory region backed by LPAE) of DMA, implement
spi_flash_can_dma() interface to inform SPI core not to map such
buffers.
When buffers are not mapped for DMA, then use a pre allocated bounce
buffer(64K = typical flash erase sector size) to read from flash and
then do a copy to actual destination buffer. This is approach is much
faster than using memcpy using CPU and also reduces CPU load.
With this patch, UBIFS read speed is ~18MB/s and CPU utilization <20% on
DRA74 Rev H EVM. Performance degradation is negligible when compared
with non bounce buffer case while using UBIFS.
Signed-off-by: Vignesh R <vigneshr@ti.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Diffstat (limited to 'drivers/spi/spi-ti-qspi.c')
-rw-r--r-- | drivers/spi/spi-ti-qspi.c | 66 |
1 files changed, 59 insertions, 7 deletions
diff --git a/drivers/spi/spi-ti-qspi.c b/drivers/spi/spi-ti-qspi.c index 804914ebfd9d..23a06148b8ae 100644 --- a/drivers/spi/spi-ti-qspi.c +++ b/drivers/spi/spi-ti-qspi.c @@ -33,6 +33,7 @@ #include <linux/pinctrl/consumer.h> #include <linux/mfd/syscon.h> #include <linux/regmap.h> +#include <linux/sizes.h> #include <linux/spi/spi.h> @@ -57,6 +58,8 @@ struct ti_qspi { struct ti_qspi_regs ctx_reg; dma_addr_t mmap_phys_base; + dma_addr_t rx_bb_dma_addr; + void *rx_bb_addr; struct dma_chan *rx_chan; u32 spi_max_frequency; @@ -126,6 +129,8 @@ struct ti_qspi { #define QSPI_SETUP_ADDR_SHIFT 8 #define QSPI_SETUP_DUMMY_SHIFT 10 +#define QSPI_DMA_BUFFER_SIZE SZ_64K + static inline unsigned long ti_qspi_read(struct ti_qspi *qspi, unsigned long reg) { @@ -429,6 +434,35 @@ static int ti_qspi_dma_xfer(struct ti_qspi *qspi, dma_addr_t dma_dst, return 0; } +static int ti_qspi_dma_bounce_buffer(struct ti_qspi *qspi, + struct spi_flash_read_message *msg) +{ + size_t readsize = msg->len; + void *to = msg->buf; + dma_addr_t dma_src = qspi->mmap_phys_base + msg->from; + int ret = 0; + + /* + * Use bounce buffer as FS like jffs2, ubifs may pass + * buffers that does not belong to kernel lowmem region. + */ + while (readsize != 0) { + size_t xfer_len = min_t(size_t, QSPI_DMA_BUFFER_SIZE, + readsize); + + ret = ti_qspi_dma_xfer(qspi, qspi->rx_bb_dma_addr, + dma_src, xfer_len); + if (ret != 0) + return ret; + memcpy(to, qspi->rx_bb_addr, xfer_len); + readsize -= xfer_len; + dma_src += xfer_len; + to += xfer_len; + } + + return ret; +} + static int ti_qspi_dma_xfer_sg(struct ti_qspi *qspi, struct sg_table rx_sg, loff_t from) { @@ -496,6 +530,12 @@ static void ti_qspi_setup_mmap_read(struct spi_device *spi, QSPI_SPI_SETUP_REG(spi->chip_select)); } +static bool ti_qspi_spi_flash_can_dma(struct spi_device *spi, + struct spi_flash_read_message *msg) +{ + return virt_addr_valid(msg->buf); +} + static int ti_qspi_spi_flash_read(struct spi_device *spi, struct spi_flash_read_message *msg) { @@ -509,15 +549,12 @@ static int ti_qspi_spi_flash_read(struct spi_device *spi, ti_qspi_setup_mmap_read(spi, msg); if (qspi->rx_chan) { - if (msg->cur_msg_mapped) { + if (msg->cur_msg_mapped) ret = ti_qspi_dma_xfer_sg(qspi, msg->rx_sg, msg->from); - if (ret) - goto err_unlock; - } else { - dev_err(qspi->dev, "Invalid address for DMA\n"); - ret = -EIO; + else + ret = ti_qspi_dma_bounce_buffer(qspi, msg); + if (ret) goto err_unlock; - } } else { memcpy_fromio(msg->buf, qspi->mmap_base + msg->from, msg->len); } @@ -718,6 +755,17 @@ static int ti_qspi_probe(struct platform_device *pdev) ret = 0; goto no_dma; } + qspi->rx_bb_addr = dma_alloc_coherent(qspi->dev, + QSPI_DMA_BUFFER_SIZE, + &qspi->rx_bb_dma_addr, + GFP_KERNEL | GFP_DMA); + if (!qspi->rx_bb_addr) { + dev_err(qspi->dev, + "dma_alloc_coherent failed, using PIO mode\n"); + dma_release_channel(qspi->rx_chan); + goto no_dma; + } + master->spi_flash_can_dma = ti_qspi_spi_flash_can_dma; master->dma_rx = qspi->rx_chan; init_completion(&qspi->transfer_complete); if (res_mmap) @@ -757,6 +805,10 @@ static int ti_qspi_remove(struct platform_device *pdev) pm_runtime_put_sync(&pdev->dev); pm_runtime_disable(&pdev->dev); + if (qspi->rx_bb_addr) + dma_free_coherent(qspi->dev, QSPI_DMA_BUFFER_SIZE, + qspi->rx_bb_addr, + qspi->rx_bb_dma_addr); if (qspi->rx_chan) dma_release_channel(qspi->rx_chan); |