Merge tag 'gpio-for-linus' of git://git.secretlab.ca/git/linux-2.6

Changes queued in gpio/next for the start of the 3.3 merge window

* tag 'gpio-for-linus-20120104' of git://git.secretlab.ca/git/linux-2.6:
  gpio: Add decode of WM8994 GPIO configuration
  gpio: Convert GPIO drivers to module_platform_driver
  gpio: Fix typo in comment in Samsung driver
  gpio: Explicitly index samsung_gpio_cfgs
  gpio: Add Linus Walleij as gpio co-maintainer
  of: Add device tree selftests
  of: create of_phandle_args to simplify return of phandle parsing data
  gpio/powerpc: Eliminate duplication of of_get_named_gpio_flags()
  gpio/microblaze: Eliminate duplication of of_get_named_gpio_flags()
  gpiolib: output basic details and consolidate gpio device drivers
  pch_gpio: Change company name OKI SEMICONDUCTOR to LAPIS Semiconductor
  pch_gpio: Support new device LAPIS Semiconductor ML7831 IOH
  spi/pl022: make the chip deselect handling thread safe
  spi/pl022: add support for pm_runtime autosuspend
  spi/pl022: disable the PL022 block when unused
  spi/pl022: move device disable to workqueue thread
  spi/pl022: skip default configuration before suspending
  spi/pl022: fix build warnings
  spi/pl022: only enable RX interrupts when TX is complete

1 files changed, 85 insertions, 56 deletions

diff --git a/drivers/spi/spi-pl022.c b/drivers/spi/spi-pl022.c
index 7026af195683..f1f5efbc3404 100644
--- a/drivers/spi/spi-pl022.c
+++ b/drivers/spi/spi-pl022.c
@@ -340,6 +340,10 @@ struct vendor_data {
  * @cur_msg: Pointer to current spi_message being processed
  * @cur_transfer: Pointer to current spi_transfer
  * @cur_chip: pointer to current clients chip(assigned from controller_state)
+ * @next_msg_cs_active: the next message in the queue has been examined
+ *  and it was found that it uses the same chip select as the previous
+ *  message, so we left it active after the previous transfer, and it's
+ *  active already.
  * @tx: current position in TX buffer to be read
  * @tx_end: end position in TX buffer to be read
  * @rx: current position in RX buffer to be written
@@ -373,6 +377,7 @@ struct pl022 {
 	struct spi_message		*cur_msg;
 	struct spi_transfer		*cur_transfer;
 	struct chip_data		*cur_chip;
+	bool				next_msg_cs_active;
 	void				*tx;
 	void				*tx_end;
 	void				*rx;
@@ -445,23 +450,9 @@ static void giveback(struct pl022 *pl022)
 	struct spi_transfer *last_transfer;
 	unsigned long flags;
 	struct spi_message *msg;
-	void (*curr_cs_control) (u32 command);
+	pl022->next_msg_cs_active = false;
 
-	/*
-	 * This local reference to the chip select function
-	 * is needed because we set curr_chip to NULL
-	 * as a step toward termininating the message.
-	 */
-	curr_cs_control = pl022->cur_chip->cs_control;
-	spin_lock_irqsave(&pl022->queue_lock, flags);
-	msg = pl022->cur_msg;
-	pl022->cur_msg = NULL;
-	pl022->cur_transfer = NULL;
-	pl022->cur_chip = NULL;
-	queue_work(pl022->workqueue, &pl022->pump_messages);
-	spin_unlock_irqrestore(&pl022->queue_lock, flags);
-
-	last_transfer = list_entry(msg->transfers.prev,
+	last_transfer = list_entry(pl022->cur_msg->transfers.prev,
 					struct spi_transfer,
 					transfer_list);
 
@@ -473,18 +464,13 @@ static void giveback(struct pl022 *pl022)
 		 */
 		udelay(last_transfer->delay_usecs);
 
-	/*
-	 * Drop chip select UNLESS cs_change is true or we are returning
-	 * a message with an error, or next message is for another chip
-	 */
-	if (!last_transfer->cs_change)
-		curr_cs_control(SSP_CHIP_DESELECT);
-	else {
+	if (!last_transfer->cs_change) {
 		struct spi_message *next_msg;
 
-		/* Holding of cs was hinted, but we need to make sure
-		 * the next message is for the same chip.  Don't waste
-		 * time with the following tests unless this was hinted.
+		/*
+		 * cs_change was not set. We can keep the chip select
+		 * enabled if there is message in the queue and it is
+		 * for the same spi device.
 		 *
 		 * We cannot postpone this until pump_messages, because
 		 * after calling msg->complete (below) the driver that
@@ -501,19 +487,29 @@ static void giveback(struct pl022 *pl022)
 					struct spi_message, queue);
 		spin_unlock_irqrestore(&pl022->queue_lock, flags);
 
-		/* see if the next and current messages point
-		 * to the same chip
+		/*
+		 * see if the next and current messages point
+		 * to the same spi device.
 		 */
-		if (next_msg && next_msg->spi != msg->spi)
+		if (next_msg && next_msg->spi != pl022->cur_msg->spi)
 			next_msg = NULL;
-		if (!next_msg || msg->state == STATE_ERROR)
-			curr_cs_control(SSP_CHIP_DESELECT);
+		if (!next_msg || pl022->cur_msg->state == STATE_ERROR)
+			pl022->cur_chip->cs_control(SSP_CHIP_DESELECT);
+		else
+			pl022->next_msg_cs_active = true;
 	}
+
+	spin_lock_irqsave(&pl022->queue_lock, flags);
+	msg = pl022->cur_msg;
+	pl022->cur_msg = NULL;
+	pl022->cur_transfer = NULL;
+	pl022->cur_chip = NULL;
+	queue_work(pl022->workqueue, &pl022->pump_messages);
+	spin_unlock_irqrestore(&pl022->queue_lock, flags);
+
 	msg->state = NULL;
 	if (msg->complete)
 		msg->complete(msg->context);
-	/* This message is completed, so let's turn off the clocks & power */
-	pm_runtime_put(&pl022->adev->dev);
 }
 
 /**
@@ -1244,9 +1240,9 @@ static irqreturn_t pl022_interrupt_handler(int irq, void *dev_id)
 
 	if ((pl022->tx == pl022->tx_end) && (flag == 0)) {
 		flag = 1;
-		/* Disable Transmit interrupt */
-		writew(readw(SSP_IMSC(pl022->virtbase)) &
-		       (~SSP_IMSC_MASK_TXIM),
+		/* Disable Transmit interrupt, enable receive interrupt */
+		writew((readw(SSP_IMSC(pl022->virtbase)) &
+		       ~SSP_IMSC_MASK_TXIM) | SSP_IMSC_MASK_RXIM,
 		       SSP_IMSC(pl022->virtbase));
 	}
 
@@ -1352,7 +1348,7 @@ static void pump_transfers(unsigned long data)
 			 */
 			udelay(previous->delay_usecs);
 
-		/* Drop chip select only if cs_change is requested */
+		/* Reselect chip select only if cs_change was requested */
 		if (previous->cs_change)
 			pl022->cur_chip->cs_control(SSP_CHIP_SELECT);
 	} else {
@@ -1379,15 +1375,22 @@ static void pump_transfers(unsigned long data)
 	}
 
 err_config_dma:
-	writew(ENABLE_ALL_INTERRUPTS, SSP_IMSC(pl022->virtbase));
+	/* enable all interrupts except RX */
+	writew(ENABLE_ALL_INTERRUPTS & ~SSP_IMSC_MASK_RXIM, SSP_IMSC(pl022->virtbase));
 }
 
 static void do_interrupt_dma_transfer(struct pl022 *pl022)
 {
-	u32 irqflags = ENABLE_ALL_INTERRUPTS;
+	/*
+	 * Default is to enable all interrupts except RX -
+	 * this will be enabled once TX is complete
+	 */
+	u32 irqflags = ENABLE_ALL_INTERRUPTS & ~SSP_IMSC_MASK_RXIM;
+
+	/* Enable target chip, if not already active */
+	if (!pl022->next_msg_cs_active)
+		pl022->cur_chip->cs_control(SSP_CHIP_SELECT);
 
-	/* Enable target chip */
-	pl022->cur_chip->cs_control(SSP_CHIP_SELECT);
 	if (set_up_next_transfer(pl022, pl022->cur_transfer)) {
 		/* Error path */
 		pl022->cur_msg->state = STATE_ERROR;
@@ -1442,7 +1445,8 @@ static void do_polling_transfer(struct pl022 *pl022)
 		} else {
 			/* STATE_START */
 			message->state = STATE_RUNNING;
-			pl022->cur_chip->cs_control(SSP_CHIP_SELECT);
+			if (!pl022->next_msg_cs_active)
+				pl022->cur_chip->cs_control(SSP_CHIP_SELECT);
 		}
 
 		/* Configuration Changing Per Transfer */
@@ -1504,14 +1508,28 @@ static void pump_messages(struct work_struct *work)
 	struct pl022 *pl022 =
 		container_of(work, struct pl022, pump_messages);
 	unsigned long flags;
+	bool was_busy = false;
 
 	/* Lock queue and check for queue work */
 	spin_lock_irqsave(&pl022->queue_lock, flags);
 	if (list_empty(&pl022->queue) || !pl022->running) {
+		if (pl022->busy) {
+			/* nothing more to do - disable spi/ssp and power off */
+			writew((readw(SSP_CR1(pl022->virtbase)) &
+				(~SSP_CR1_MASK_SSE)), SSP_CR1(pl022->virtbase));
+
+			if (pl022->master_info->autosuspend_delay > 0) {
+				pm_runtime_mark_last_busy(&pl022->adev->dev);
+				pm_runtime_put_autosuspend(&pl022->adev->dev);
+			} else {
+				pm_runtime_put(&pl022->adev->dev);
+			}
+		}
 		pl022->busy = false;
 		spin_unlock_irqrestore(&pl022->queue_lock, flags);
 		return;
 	}
+
 	/* Make sure we are not already running a message */
 	if (pl022->cur_msg) {
 		spin_unlock_irqrestore(&pl022->queue_lock, flags);
@@ -1522,7 +1540,10 @@ static void pump_messages(struct work_struct *work)
 	    list_entry(pl022->queue.next, struct spi_message, queue);
 
 	list_del_init(&pl022->cur_msg->queue);
-	pl022->busy = true;
+	if (pl022->busy)
+		was_busy = true;
+	else
+		pl022->busy = true;
 	spin_unlock_irqrestore(&pl022->queue_lock, flags);
 
 	/* Initial message state */
@@ -1532,12 +1553,14 @@ static void pump_messages(struct work_struct *work)
 
 	/* Setup the SPI using the per chip configuration */
 	pl022->cur_chip = spi_get_ctldata(pl022->cur_msg->spi);
-	/*
-	 * We enable the core voltage and clocks here, then the clocks
-	 * and core will be disabled when giveback() is called in each method
-	 * (poll/interrupt/DMA)
-	 */
-	pm_runtime_get_sync(&pl022->adev->dev);
+	if (!was_busy)
+		/*
+		 * We enable the core voltage and clocks here, then the clocks
+		 * and core will be disabled when this workqueue is run again
+		 * and there is no more work to be done.
+		 */
+		pm_runtime_get_sync(&pl022->adev->dev);
+
 	restore_state(pl022);
 	flush(pl022);
 
@@ -1582,6 +1605,7 @@ static int start_queue(struct pl022 *pl022)
 	pl022->cur_msg = NULL;
 	pl022->cur_transfer = NULL;
 	pl022->cur_chip = NULL;
+	pl022->next_msg_cs_active = false;
 	spin_unlock_irqrestore(&pl022->queue_lock, flags);
 
 	queue_work(pl022->workqueue, &pl022->pump_messages);
@@ -1881,7 +1905,7 @@ static int pl022_setup(struct spi_device *spi)
 {
 	struct pl022_config_chip const *chip_info;
 	struct chip_data *chip;
-	struct ssp_clock_params clk_freq = {0, };
+	struct ssp_clock_params clk_freq = { .cpsdvsr = 0, .scr = 0};
 	int status = 0;
 	struct pl022 *pl022 = spi_master_get_devdata(spi->master);
 	unsigned int bits = spi->bits_per_word;
@@ -2231,7 +2255,17 @@ pl022_probe(struct amba_device *adev, const struct amba_id *id)
 	dev_dbg(dev, "probe succeeded\n");
 
 	/* let runtime pm put suspend */
-	pm_runtime_put(dev);
+	if (platform_info->autosuspend_delay > 0) {
+		dev_info(&adev->dev,
+			"will use autosuspend for runtime pm, delay %dms\n",
+			platform_info->autosuspend_delay);
+		pm_runtime_set_autosuspend_delay(dev,
+			platform_info->autosuspend_delay);
+		pm_runtime_use_autosuspend(dev);
+		pm_runtime_put_autosuspend(dev);
+	} else {
+		pm_runtime_put(dev);
+	}
 	return 0;
 
  err_spi_register:
@@ -2305,11 +2339,6 @@ static int pl022_suspend(struct device *dev)
 		return status;
 	}
 
-	amba_vcore_enable(pl022->adev);
-	amba_pclk_enable(pl022->adev);
-	load_ssp_default_config(pl022);
-	amba_pclk_disable(pl022->adev);
-	amba_vcore_disable(pl022->adev);
 	dev_dbg(dev, "suspended\n");
 	return 0;
 }