Merge mainline/master into arm/fixes

This brings in the mainline tree right after armsoc contents was merged
this release cycle, so that we can re-run savedefconfig, etc.

Signed-off-by: Olof Johansson <olof@lixom.net>

62 files changed, 3269 insertions, 343 deletions

diff --git a/drivers/soc/amlogic/meson-gx-socinfo.c b/drivers/soc/amlogic/meson-gx-socinfo.c
index 6d0d04f163cb..01fc0d20a70d 100644
--- a/drivers/soc/amlogic/meson-gx-socinfo.c
+++ b/drivers/soc/amlogic/meson-gx-socinfo.c
@@ -40,6 +40,7 @@ static const struct meson_gx_soc_id {
 	{ "G12A", 0x28 },
 	{ "G12B", 0x29 },
 	{ "SM1", 0x2b },
+	{ "A1", 0x2c },
 };
 
 static const struct meson_gx_package_id {
@@ -68,6 +69,8 @@ static const struct meson_gx_package_id {
 	{ "S922X", 0x29, 0x40, 0xf0 },
 	{ "A311D", 0x29, 0x10, 0xf0 },
 	{ "S905X3", 0x2b, 0x5, 0xf },
+	{ "S905D3", 0x2b, 0xb0, 0xf0 },
+	{ "A113L", 0x2c, 0x0, 0xf8 },
 };
 
 static inline unsigned int socinfo_to_major(u32 socinfo)
diff --git a/drivers/soc/atmel/Kconfig b/drivers/soc/atmel/Kconfig
index 05528139b023..50caf6db9c0e 100644
--- a/drivers/soc/atmel/Kconfig
+++ b/drivers/soc/atmel/Kconfig
@@ -5,3 +5,14 @@ config AT91_SOC_ID
 	default ARCH_AT91
 	help
 	  Include support for the SoC bus on the Atmel ARM SoCs.
+
+config AT91_SOC_SFR
+	tristate "Special Function Registers support"
+	depends on ARCH_AT91 || COMPILE_TEST
+	help
+	  This is a driver for the Special Function Registers available on
+	  Atmel SAMA5Dx SoCs, providing access to specific aspects of the
+	  integrated memory, bridge implementations, processor etc.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called sfr.
diff --git a/drivers/soc/atmel/Makefile b/drivers/soc/atmel/Makefile
index 7ca355d10553..d849a897cd77 100644
--- a/drivers/soc/atmel/Makefile
+++ b/drivers/soc/atmel/Makefile
@@ -1,2 +1,3 @@
 # SPDX-License-Identifier: GPL-2.0-only
 obj-$(CONFIG_AT91_SOC_ID) += soc.o
+obj-$(CONFIG_AT91_SOC_SFR) += sfr.o
diff --git a/drivers/soc/atmel/sfr.c b/drivers/soc/atmel/sfr.c
new file mode 100644
index 000000000000..0525eef49d1a
--- /dev/null
+++ b/drivers/soc/atmel/sfr.c
@@ -0,0 +1,99 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * sfr.c - driver for special function registers
+ *
+ * Copyright (C) 2019 Bootlin.
+ *
+ */
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/nvmem-provider.h>
+#include <linux/random.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+
+#define SFR_SN0		0x4c
+#define SFR_SN_SIZE	8
+
+struct atmel_sfr_priv {
+	struct regmap			*regmap;
+};
+
+static int atmel_sfr_read(void *context, unsigned int offset,
+			  void *buf, size_t bytes)
+{
+	struct atmel_sfr_priv *priv = context;
+
+	return regmap_bulk_read(priv->regmap, SFR_SN0 + offset,
+				buf, bytes / 4);
+}
+
+static struct nvmem_config atmel_sfr_nvmem_config = {
+	.name = "atmel-sfr",
+	.read_only = true,
+	.word_size = 4,
+	.stride = 4,
+	.size = SFR_SN_SIZE,
+	.reg_read = atmel_sfr_read,
+};
+
+static int atmel_sfr_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct device_node *np = dev->of_node;
+	struct nvmem_device *nvmem;
+	struct atmel_sfr_priv *priv;
+	u8 sn[SFR_SN_SIZE];
+	int ret;
+
+	priv = devm_kmalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	priv->regmap = syscon_node_to_regmap(np);
+	if (IS_ERR(priv->regmap)) {
+		dev_err(dev, "cannot get parent's regmap\n");
+		return PTR_ERR(priv->regmap);
+	}
+
+	atmel_sfr_nvmem_config.dev = dev;
+	atmel_sfr_nvmem_config.priv = priv;
+
+	nvmem = devm_nvmem_register(dev, &atmel_sfr_nvmem_config);
+	if (IS_ERR(nvmem)) {
+		dev_err(dev, "error registering nvmem config\n");
+		return PTR_ERR(nvmem);
+	}
+
+	ret = atmel_sfr_read(priv, 0, sn, SFR_SN_SIZE);
+	if (ret == 0)
+		add_device_randomness(sn, SFR_SN_SIZE);
+
+	return ret;
+}
+
+static const struct of_device_id atmel_sfr_dt_ids[] = {
+	{
+		.compatible = "atmel,sama5d2-sfr",
+	}, {
+		.compatible = "atmel,sama5d4-sfr",
+	}, {
+		/* sentinel */
+	},
+};
+MODULE_DEVICE_TABLE(of, atmel_sfr_dt_ids);
+
+static struct platform_driver atmel_sfr_driver = {
+	.probe = atmel_sfr_probe,
+	.driver = {
+		.name = "atmel-sfr",
+		.of_match_table = atmel_sfr_dt_ids,
+	},
+};
+module_platform_driver(atmel_sfr_driver);
+
+MODULE_AUTHOR("Kamel Bouhara <kamel.bouhara@bootlin.com>");
+MODULE_DESCRIPTION("Atmel SFR SN driver for SAMA5D2/4 SoC family");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/soc/fsl/Kconfig b/drivers/soc/fsl/Kconfig
index f9ad8ad54a7d..4df32bc4c7a6 100644
--- a/drivers/soc/fsl/Kconfig
+++ b/drivers/soc/fsl/Kconfig
@@ -40,4 +40,14 @@ config DPAA2_CONSOLE
 	  /dev/dpaa2_mc_console and /dev/dpaa2_aiop_console,
 	  which can be used to dump the Management Complex and AIOP
 	  firmware logs.
+
+config FSL_RCPM
+	bool "Freescale RCPM support"
+	depends on PM_SLEEP && (ARM || ARM64)
+	help
+	  The NXP QorIQ Processors based on ARM Core have RCPM module
+	  (Run Control and Power Management), which performs all device-level
+	  tasks associated with power management, such as wakeup source control.
+	  Note that currently this driver will not support PowerPC based
+	  QorIQ processor.
 endmenu
diff --git a/drivers/soc/fsl/Makefile b/drivers/soc/fsl/Makefile
index 71dee8d0d1f0..906f1cd8af01 100644
--- a/drivers/soc/fsl/Makefile
+++ b/drivers/soc/fsl/Makefile
@@ -6,6 +6,7 @@
 obj-$(CONFIG_FSL_DPAA)                 += qbman/
 obj-$(CONFIG_QUICC_ENGINE)		+= qe/
 obj-$(CONFIG_CPM)			+= qe/
+obj-$(CONFIG_FSL_RCPM)			+= rcpm.o
 obj-$(CONFIG_FSL_GUTS)			+= guts.o
 obj-$(CONFIG_FSL_MC_DPIO) 		+= dpio/
 obj-$(CONFIG_DPAA2_CONSOLE)		+= dpaa2-console.o
diff --git a/drivers/soc/fsl/qbman/qman.c b/drivers/soc/fsl/qbman/qman.c
index bf68d86d80ee..1e164e03410a 100644
--- a/drivers/soc/fsl/qbman/qman.c
+++ b/drivers/soc/fsl/qbman/qman.c
@@ -1749,6 +1749,13 @@ struct qman_portal *qman_get_affine_portal(int cpu)
 }
 EXPORT_SYMBOL(qman_get_affine_portal);
 
+int qman_start_using_portal(struct qman_portal *p, struct device *dev)
+{
+	return (!device_link_add(dev, p->config->dev,
+				 DL_FLAG_AUTOREMOVE_CONSUMER)) ? -EINVAL : 0;
+}
+EXPORT_SYMBOL(qman_start_using_portal);
+
 int qman_p_poll_dqrr(struct qman_portal *p, unsigned int limit)
 {
 	return __poll_portal_fast(p, limit);
diff --git a/drivers/soc/fsl/rcpm.c b/drivers/soc/fsl/rcpm.c
new file mode 100644
index 000000000000..a093dbe6d2cb
--- /dev/null
+++ b/drivers/soc/fsl/rcpm.c
@@ -0,0 +1,151 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// rcpm.c - Freescale QorIQ RCPM driver
+//
+// Copyright 2019 NXP
+//
+// Author: Ran Wang <ran.wang_1@nxp.com>
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/of_address.h>
+#include <linux/slab.h>
+#include <linux/suspend.h>
+#include <linux/kernel.h>
+
+#define RCPM_WAKEUP_CELL_MAX_SIZE	7
+
+struct rcpm {
+	unsigned int	wakeup_cells;
+	void __iomem	*ippdexpcr_base;
+	bool		little_endian;
+};
+
+/**
+ * rcpm_pm_prepare - performs device-level tasks associated with power
+ * management, such as programming related to the wakeup source control.
+ * @dev: Device to handle.
+ *
+ */
+static int rcpm_pm_prepare(struct device *dev)
+{
+	int i, ret, idx;
+	void __iomem *base;
+	struct wakeup_source	*ws;
+	struct rcpm		*rcpm;
+	struct device_node	*np = dev->of_node;
+	u32 value[RCPM_WAKEUP_CELL_MAX_SIZE + 1];
+	u32 setting[RCPM_WAKEUP_CELL_MAX_SIZE] = {0};
+
+	rcpm = dev_get_drvdata(dev);
+	if (!rcpm)
+		return -EINVAL;
+
+	base = rcpm->ippdexpcr_base;
+	idx = wakeup_sources_read_lock();
+
+	/* Begin with first registered wakeup source */
+	for_each_wakeup_source(ws) {
+
+		/* skip object which is not attached to device */
+		if (!ws->dev || !ws->dev->parent)
+			continue;
+
+		ret = device_property_read_u32_array(ws->dev->parent,
+				"fsl,rcpm-wakeup", value,
+				rcpm->wakeup_cells + 1);
+
+		/*  Wakeup source should refer to current rcpm device */
+		if (ret || (np->phandle != value[0]))
+			continue;
+
+		/* Property "#fsl,rcpm-wakeup-cells" of rcpm node defines the
+		 * number of IPPDEXPCR register cells, and "fsl,rcpm-wakeup"
+		 * of wakeup source IP contains an integer array: <phandle to
+		 * RCPM node, IPPDEXPCR0 setting, IPPDEXPCR1 setting,
+		 * IPPDEXPCR2 setting, etc>.
+		 *
+		 * So we will go thought them to collect setting data.
+		 */
+		for (i = 0; i < rcpm->wakeup_cells; i++)
+			setting[i] |= value[i + 1];
+	}
+
+	wakeup_sources_read_unlock(idx);
+
+	/* Program all IPPDEXPCRn once */
+	for (i = 0; i < rcpm->wakeup_cells; i++) {
+		u32 tmp = setting[i];
+		void __iomem *address = base + i * 4;
+
+		if (!tmp)
+			continue;
+
+		/* We can only OR related bits */
+		if (rcpm->little_endian) {
+			tmp |= ioread32(address);
+			iowrite32(tmp, address);
+		} else {
+			tmp |= ioread32be(address);
+			iowrite32be(tmp, address);
+		}
+	}
+
+	return 0;
+}
+
+static const struct dev_pm_ops rcpm_pm_ops = {
+	.prepare =  rcpm_pm_prepare,
+};
+
+static int rcpm_probe(struct platform_device *pdev)
+{
+	struct device	*dev = &pdev->dev;
+	struct resource *r;
+	struct rcpm	*rcpm;
+	int ret;
+
+	rcpm = devm_kzalloc(dev, sizeof(*rcpm), GFP_KERNEL);
+	if (!rcpm)
+		return -ENOMEM;
+
+	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!r)
+		return -ENODEV;
+
+	rcpm->ippdexpcr_base = devm_ioremap_resource(&pdev->dev, r);
+	if (IS_ERR(rcpm->ippdexpcr_base)) {
+		ret =  PTR_ERR(rcpm->ippdexpcr_base);
+		return ret;
+	}
+
+	rcpm->little_endian = device_property_read_bool(
+			&pdev->dev, "little-endian");
+
+	ret = device_property_read_u32(&pdev->dev,
+			"#fsl,rcpm-wakeup-cells", &rcpm->wakeup_cells);
+	if (ret)
+		return ret;
+
+	dev_set_drvdata(&pdev->dev, rcpm);
+
+	return 0;
+}
+
+static const struct of_device_id rcpm_of_match[] = {
+	{ .compatible = "fsl,qoriq-rcpm-2.1+", },
+	{}
+};
+MODULE_DEVICE_TABLE(of, rcpm_of_match);
+
+static struct platform_driver rcpm_driver = {
+	.driver = {
+		.name = "rcpm",
+		.of_match_table = rcpm_of_match,
+		.pm	= &rcpm_pm_ops,
+	},
+	.probe = rcpm_probe,
+};
+
+module_platform_driver(rcpm_driver);
diff --git a/drivers/soc/imx/soc-imx-scu.c b/drivers/soc/imx/soc-imx-scu.c
index c68882eb80f7..fb70b8a3f7c5 100644
--- a/drivers/soc/imx/soc-imx-scu.c
+++ b/drivers/soc/imx/soc-imx-scu.c
@@ -33,12 +33,10 @@ struct imx_sc_msg_misc_get_soc_uid {
 	u32 uid_high;
 } __packed;
 
-static ssize_t soc_uid_show(struct device *dev,
-			    struct device_attribute *attr, char *buf)
+static int imx_scu_soc_uid(u64 *soc_uid)
 {
 	struct imx_sc_msg_misc_get_soc_uid msg;
 	struct imx_sc_rpc_msg *hdr = &msg.hdr;
-	u64 soc_uid;
 	int ret;
 
 	hdr->ver = IMX_SC_RPC_VERSION;
@@ -52,15 +50,13 @@ static ssize_t soc_uid_show(struct device *dev,
 		return ret;
 	}
 
-	soc_uid = msg.uid_high;
-	soc_uid <<= 32;
-	soc_uid |= msg.uid_low;
+	*soc_uid = msg.uid_high;
+	*soc_uid <<= 32;
+	*soc_uid |= msg.uid_low;
 
-	return sprintf(buf, "%016llX\n", soc_uid);
+	return 0;
 }
 
-static DEVICE_ATTR_RO(soc_uid);
-
 static int imx_scu_soc_id(void)
 {
 	struct imx_sc_msg_misc_get_soc_id msg;
@@ -89,6 +85,7 @@ static int imx_scu_soc_probe(struct platform_device *pdev)
 	struct soc_device_attribute *soc_dev_attr;
 	struct soc_device *soc_dev;
 	int id, ret;
+	u64 uid = 0;
 	u32 val;
 
 	ret = imx_scu_get_handle(&soc_ipc_handle);
@@ -112,6 +109,10 @@ static int imx_scu_soc_probe(struct platform_device *pdev)
 	if (id < 0)
 		return -EINVAL;
 
+	ret = imx_scu_soc_uid(&uid);
+	if (ret < 0)
+		return -EINVAL;
+
 	/* format soc_id value passed from SCU firmware */
 	val = id & 0x1f;
 	soc_dev_attr->soc_id = kasprintf(GFP_KERNEL, "0x%x", val);
@@ -130,19 +131,22 @@ static int imx_scu_soc_probe(struct platform_device *pdev)
 		goto free_soc_id;
 	}
 
+	soc_dev_attr->serial_number = kasprintf(GFP_KERNEL, "%016llX", uid);
+	if (!soc_dev_attr->serial_number) {
+		ret = -ENOMEM;
+		goto free_revision;
+	}
+
 	soc_dev = soc_device_register(soc_dev_attr);
 	if (IS_ERR(soc_dev)) {
 		ret = PTR_ERR(soc_dev);
-		goto free_revision;
+		goto free_serial_number;
 	}
 
-	ret = device_create_file(soc_device_to_device(soc_dev),
-				 &dev_attr_soc_uid);
-	if (ret)
-		goto free_revision;
-
 	return 0;
 
+free_serial_number:
+	kfree(soc_dev_attr->serial_number);
 free_revision:
 	kfree(soc_dev_attr->revision);
 free_soc_id:
diff --git a/drivers/soc/imx/soc-imx8.c b/drivers/soc/imx/soc-imx8.c
index b9831576dd25..d84ed736cdb0 100644
--- a/drivers/soc/imx/soc-imx8.c
+++ b/drivers/soc/imx/soc-imx8.c
@@ -9,6 +9,7 @@
 #include <linux/slab.h>
 #include <linux/sys_soc.h>
 #include <linux/platform_device.h>
+#include <linux/arm-smccc.h>
 #include <linux/of.h>
 
 #define REV_B1				0x21
@@ -16,6 +17,8 @@
 #define IMX8MQ_SW_INFO_B1		0x40
 #define IMX8MQ_SW_MAGIC_B1		0xff0055aa
 
+#define IMX_SIP_GET_SOC_INFO		0xc2000006
+
 #define OCOTP_UID_LOW			0x410
 #define OCOTP_UID_HIGH			0x420
 
@@ -29,13 +32,21 @@ struct imx8_soc_data {
 
 static u64 soc_uid;
 
-static ssize_t soc_uid_show(struct device *dev,
-			    struct device_attribute *attr, char *buf)
+#ifdef CONFIG_HAVE_ARM_SMCCC
+static u32 imx8mq_soc_revision_from_atf(void)
 {
-	return sprintf(buf, "%016llX\n", soc_uid);
-}
+	struct arm_smccc_res res;
 
-static DEVICE_ATTR_RO(soc_uid);
+	arm_smccc_smc(IMX_SIP_GET_SOC_INFO, 0, 0, 0, 0, 0, 0, 0, &res);
+
+	if (res.a0 == SMCCC_RET_NOT_SUPPORTED)
+		return 0;
+	else
+		return res.a0 & 0xff;
+}
+#else
+static inline u32 imx8mq_soc_revision_from_atf(void) { return 0; };
+#endif
 
 static u32 __init imx8mq_soc_revision(void)
 {
@@ -51,9 +62,16 @@ static u32 __init imx8mq_soc_revision(void)
 	ocotp_base = of_iomap(np, 0);
 	WARN_ON(!ocotp_base);
 
-	magic = readl_relaxed(ocotp_base + IMX8MQ_SW_INFO_B1);
-	if (magic == IMX8MQ_SW_MAGIC_B1)
-		rev = REV_B1;
+	/*
+	 * SOC revision on older imx8mq is not available in fuses so query
+	 * the value from ATF instead.
+	 */
+	rev = imx8mq_soc_revision_from_atf();
+	if (!rev) {
+		magic = readl_relaxed(ocotp_base + IMX8MQ_SW_INFO_B1);
+		if (magic == IMX8MQ_SW_MAGIC_B1)
+			rev = REV_B1;
+	}
 
 	soc_uid = readl_relaxed(ocotp_base + OCOTP_UID_HIGH);
 	soc_uid <<= 32;
@@ -174,22 +192,25 @@ static int __init imx8_soc_init(void)
 		goto free_soc;
 	}
 
+	soc_dev_attr->serial_number = kasprintf(GFP_KERNEL, "%016llX", soc_uid);
+	if (!soc_dev_attr->serial_number) {
+		ret = -ENOMEM;
+		goto free_rev;
+	}
+
 	soc_dev = soc_device_register(soc_dev_attr);
 	if (IS_ERR(soc_dev)) {
 		ret = PTR_ERR(soc_dev);
-		goto free_rev;
+		goto free_serial_number;
 	}
 
-	ret = device_create_file(soc_device_to_device(soc_dev),
-				 &dev_attr_soc_uid);
-	if (ret)
-		goto free_rev;
-
 	if (IS_ENABLED(CONFIG_ARM_IMX_CPUFREQ_DT))
 		platform_device_register_simple("imx-cpufreq-dt", -1, NULL, 0);
 
 	return 0;
 
+free_serial_number:
+	kfree(soc_dev_attr->serial_number);
 free_rev:
 	if (strcmp(soc_dev_attr->revision, "unknown"))
 		kfree(soc_dev_attr->revision);
diff --git a/drivers/soc/mediatek/mtk-scpsys.c b/drivers/soc/mediatek/mtk-scpsys.c
index 503222d0d0da..f669d3754627 100644
--- a/drivers/soc/mediatek/mtk-scpsys.c
+++ b/drivers/soc/mediatek/mtk-scpsys.c
@@ -21,7 +21,7 @@
 #include <dt-bindings/power/mt8173-power.h>
 
 #define MTK_POLL_DELAY_US   10
-#define MTK_POLL_TIMEOUT    (jiffies_to_usecs(HZ))
+#define MTK_POLL_TIMEOUT    USEC_PER_SEC
 
 #define MTK_SCPD_ACTIVE_WAKEUP		BIT(0)
 #define MTK_SCPD_FWAIT_SRAM		BIT(1)
@@ -108,6 +108,17 @@ static const char * const clk_names[] = {
 
 #define MAX_CLKS	3
 
+/**
+ * struct scp_domain_data - scp domain data for power on/off flow
+ * @name: The domain name.
+ * @sta_mask: The mask for power on/off status bit.
+ * @ctl_offs: The offset for main power control register.
+ * @sram_pdn_bits: The mask for sram power control bits.
+ * @sram_pdn_ack_bits: The mask for sram power control acked bits.
+ * @bus_prot_mask: The mask for single step bus protection.
+ * @clk_id: The basic clocks required by this power domain.
+ * @caps: The flag for active wake-up action.
+ */
 struct scp_domain_data {
 	const char *name;
 	u32 sta_mask;
@@ -180,32 +191,132 @@ static int scpsys_domain_is_on(struct scp_domain *scpd)
 	return -EINVAL;
 }
 
+static int scpsys_regulator_enable(struct scp_domain *scpd)
+{
+	if (!scpd->supply)
+		return 0;
+
+	return regulator_enable(scpd->supply);
+}
+
+static int scpsys_regulator_disable(struct scp_domain *scpd)
+{
+	if (!scpd->supply)
+		return 0;
+
+	return regulator_disable(scpd->supply);
+}
+
+static void scpsys_clk_disable(struct clk *clk[], int max_num)
+{
+	int i;
+
+	for (i = max_num - 1; i >= 0; i--)
+		clk_disable_unprepare(clk[i]);
+}
+
+static int scpsys_clk_enable(struct clk *clk[], int max_num)
+{
+	int i, ret = 0;
+
+	for (i = 0; i < max_num && clk[i]; i++) {
+		ret = clk_prepare_enable(clk[i]);
+		if (ret) {
+			scpsys_clk_disable(clk, i);
+			break;
+		}
+	}
+
+	return ret;
+}
+
+static int scpsys_sram_enable(struct scp_domain *scpd, void __iomem *ctl_addr)
+{
+	u32 val;
+	u32 pdn_ack = scpd->data->sram_pdn_ack_bits;
+	int tmp;
+
+	val = readl(ctl_addr);
+	val &= ~scpd->data->sram_pdn_bits;
+	writel(val, ctl_addr);
+
+	/* Either wait until SRAM_PDN_ACK all 0 or have a force wait */
+	if (MTK_SCPD_CAPS(scpd, MTK_SCPD_FWAIT_SRAM)) {
+		/*
+		 * Currently, MTK_SCPD_FWAIT_SRAM is necessary only for
+		 * MT7622_POWER_DOMAIN_WB and thus just a trivial setup
+		 * is applied here.
+		 */
+		usleep_range(12000, 12100);
+	} else {
+		/* Either wait until SRAM_PDN_ACK all 1 or 0 */
+		int ret = readl_poll_timeout(ctl_addr, tmp,
+				(tmp & pdn_ack) == 0,
+				MTK_POLL_DELAY_US, MTK_POLL_TIMEOUT);
+		if (ret < 0)
+			return ret;
+	}
+
+	return 0;
+}
+
+static int scpsys_sram_disable(struct scp_domain *scpd, void __iomem *ctl_addr)
+{
+	u32 val;
+	u32 pdn_ack = scpd->data->sram_pdn_ack_bits;
+	int tmp;
+
+	val = readl(ctl_addr);
+	val |= scpd->data->sram_pdn_bits;
+	writel(val, ctl_addr);
+
+	/* Either wait until SRAM_PDN_ACK all 1 or 0 */
+	return readl_poll_timeout(ctl_addr, tmp,
+			(tmp & pdn_ack) == pdn_ack,
+			MTK_POLL_DELAY_US, MTK_POLL_TIMEOUT);
+}
+
+static int scpsys_bus_protect_enable(struct scp_domain *scpd)
+{
+	struct scp *scp = scpd->scp;
+
+	if (!scpd->data->bus_prot_mask)
+		return 0;
+
+	return mtk_infracfg_set_bus_protection(scp->infracfg,
+			scpd->data->bus_prot_mask,
+			scp->bus_prot_reg_update);
+}
+
+static int scpsys_bus_protect_disable(struct scp_domain *scpd)
+{
+	struct scp *scp = scpd->scp;
+
+	if (!scpd->data->bus_prot_mask)
+		return 0;
+
+	return mtk_infracfg_clear_bus_protection(scp->infracfg,
+			scpd->data->bus_prot_mask,
+			scp->bus_prot_reg_update);
+}
+
 static int scpsys_power_on(struct generic_pm_domain *genpd)
 {
 	struct scp_domain *scpd = container_of(genpd, struct scp_domain, genpd);
 	struct scp *scp = scpd->scp;
 	void __iomem *ctl_addr = scp->base + scpd->data->ctl_offs;
-	u32 pdn_ack = scpd->data->sram_pdn_ack_bits;
 	u32 val;
 	int ret, tmp;
-	int i;
 
-	if (scpd->supply) {
-		ret = regulator_enable(scpd->supply);
-		if (ret)
-			return ret;
-	}
-
-	for (i = 0; i < MAX_CLKS && scpd->clk[i]; i++) {
-		ret = clk_prepare_enable(scpd->clk[i]);
-		if (ret) {
-			for (--i; i >= 0; i--)
-				clk_disable_unprepare(scpd->clk[i]);
+	ret = scpsys_regulator_enable(scpd);
+	if (ret < 0)
+		return ret;
 
-			goto err_clk;
-		}
-	}
+	ret = scpsys_clk_enable(scpd->clk, MAX_CLKS);
+	if (ret)
+		goto err_clk;
 
+	/* subsys power on */
 	val = readl(ctl_addr);
 	val |= PWR_ON_BIT;
 	writel(val, ctl_addr);
@@ -227,43 +338,20 @@ static int scpsys_power_on(struct generic_pm_domain *genpd)
 	val |= PWR_RST_B_BIT;
 	writel(val, ctl_addr);
 
-	val &= ~scpd->data->sram_pdn_bits;
-	writel(val, ctl_addr);
-
-	/* Either wait until SRAM_PDN_ACK all 0 or have a force wait */
-	if (MTK_SCPD_CAPS(scpd, MTK_SCPD_FWAIT_SRAM)) {
-		/*
-		 * Currently, MTK_SCPD_FWAIT_SRAM is necessary only for
-		 * MT7622_POWER_DOMAIN_WB and thus just a trivial setup is
-		 * applied here.
-		 */
-		usleep_range(12000, 12100);
-
-	} else {
-		ret = readl_poll_timeout(ctl_addr, tmp, (tmp & pdn_ack) == 0,
-					 MTK_POLL_DELAY_US, MTK_POLL_TIMEOUT);
-		if (ret < 0)
-			goto err_pwr_ack;
-	}
+	ret = scpsys_sram_enable(scpd, ctl_addr);
+	if (ret < 0)
+		goto err_pwr_ack;
 
-	if (scpd->data->bus_prot_mask) {
-		ret = mtk_infracfg_clear_bus_protection(scp->infracfg,
-				scpd->data->bus_prot_mask,
-				scp->bus_prot_reg_update);
-		if (ret)
-			goto err_pwr_ack;
-	}
+	ret = scpsys_bus_protect_disable(scpd);
+	if (ret < 0)
+		goto err_pwr_ack;
 
 	return 0;
 
 err_pwr_ack:
-	for (i = MAX_CLKS - 1; i >= 0; i--) {
-		if (scpd->clk[i])
-			clk_disable_unprepare(scpd->clk[i]);
-	}
+	scpsys_clk_disable(scpd->clk, MAX_CLKS);
 err_clk:
-	if (scpd->supply)
-		regulator_disable(scpd->supply);
+	scpsys_regulator_disable(scpd);
 
 	dev_err(scp->dev, "Failed to power on domain %s\n", genpd->name);
 
@@ -275,29 +363,19 @@ static int scpsys_power_off(struct generic_pm_domain *genpd)
 	struct scp_domain *scpd = container_of(genpd, struct scp_domain, genpd);
 	struct scp *scp = scpd->scp;
 	void __iomem *ctl_addr = scp->base + scpd->data->ctl_offs;
-	u32 pdn_ack = scpd->data->sram_pdn_ack_bits;
 	u32 val;
 	int ret, tmp;
-	int i;
-
-	if (scpd->data->bus_prot_mask) {
-		ret = mtk_infracfg_set_bus_protection(scp->infracfg,
-				scpd->data->bus_prot_mask,
-				scp->bus_prot_reg_update);
-		if (ret)
-			goto out;
-	}
 
-	val = readl(ctl_addr);
-	val |= scpd->data->sram_pdn_bits;
-	writel(val, ctl_addr);
+	ret = scpsys_bus_protect_enable(scpd);
+	if (ret < 0)
+		goto out;
 
-	/* wait until SRAM_PDN_ACK all 1 */
-	ret = readl_poll_timeout(ctl_addr, tmp, (tmp & pdn_ack) == pdn_ack,
-				 MTK_POLL_DELAY_US, MTK_POLL_TIMEOUT);
+	ret = scpsys_sram_disable(scpd, ctl_addr);
 	if (ret < 0)
 		goto out;
 
+	/* subsys power off */
+	val = readl(ctl_addr);
 	val |= PWR_ISO_BIT;
 	writel(val, ctl_addr);
 
@@ -319,11 +397,11 @@ static int scpsys_power_off(struct generic_pm_domain *genpd)
 	if (ret < 0)
 		goto out;
 
-	for (i = 0; i < MAX_CLKS && scpd->clk[i]; i++)
-		clk_disable_unprepare(scpd->clk[i]);
+	scpsys_clk_disable(scpd->clk, MAX_CLKS);
 
-	if (scpd->supply)
-		regulator_disable(scpd->supply);
+	ret = scpsys_regulator_disable(scpd);
+	if (ret < 0)
+		goto out;
 
 	return 0;
 
diff --git a/drivers/soc/qcom/Kconfig b/drivers/soc/qcom/Kconfig
index 661e47acc354..c6df8b43fa6d 100644
--- a/drivers/soc/qcom/Kconfig
+++ b/drivers/soc/qcom/Kconfig
@@ -58,17 +58,9 @@ config QCOM_LLCC
 	depends on ARCH_QCOM || COMPILE_TEST
 	help
 	  Qualcomm Technologies, Inc. platform specific
-	  Last Level Cache Controller(LLCC) driver. This provides interfaces
-	  to clients that use the LLCC. Say yes here to enable LLCC slice
-	  driver.
-
-config QCOM_SDM845_LLCC
-	tristate "Qualcomm Technologies, Inc. SDM845 LLCC driver"
-	depends on QCOM_LLCC
-	help
-	  Say yes here to enable the LLCC driver for SDM845. This provides
-	  data required to configure LLCC so that clients can start using the
-	  LLCC slices.
+	  Last Level Cache Controller(LLCC) driver for platforms such as,
+	  SDM845. This provides interfaces to clients that use the LLCC.
+	  Say yes here to enable LLCC slice driver.
 
 config QCOM_MDT_LOADER
 	tristate
diff --git a/drivers/soc/qcom/Makefile b/drivers/soc/qcom/Makefile
index 162788701a77..2559fe948ce0 100644
--- a/drivers/soc/qcom/Makefile
+++ b/drivers/soc/qcom/Makefile
@@ -21,7 +21,6 @@ obj-$(CONFIG_QCOM_SMSM)	+= smsm.o
 obj-$(CONFIG_QCOM_SOCINFO)	+= socinfo.o
 obj-$(CONFIG_QCOM_WCNSS_CTRL) += wcnss_ctrl.o
 obj-$(CONFIG_QCOM_APR) += apr.o
-obj-$(CONFIG_QCOM_LLCC) += llcc-slice.o
-obj-$(CONFIG_QCOM_SDM845_LLCC) += llcc-sdm845.o
+obj-$(CONFIG_QCOM_LLCC) += llcc-qcom.o
 obj-$(CONFIG_QCOM_RPMHPD) += rpmhpd.o
 obj-$(CONFIG_QCOM_RPMPD) += rpmpd.o
diff --git a/drivers/soc/qcom/llcc-slice.c b/drivers/soc/qcom/llcc-qcom.c
index 9090ea12eaf3..429b5a60a1ba 100644
--- a/drivers/soc/qcom/llcc-slice.c
+++ b/drivers/soc/qcom/llcc-qcom.c
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0
 /*
- * Copyright (c) 2017-2018, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2017-2019, The Linux Foundation. All rights reserved.
  *
  */
 
@@ -11,6 +11,7 @@
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/mutex.h>
+#include <linux/of.h>
 #include <linux/of_device.h>
 #include <linux/regmap.h>
 #include <linux/sizes.h>
@@ -46,15 +47,90 @@
 
 #define BANK_OFFSET_STRIDE	      0x80000
 
-static struct llcc_drv_data *drv_data = (void *) -EPROBE_DEFER;
+/**
+ * llcc_slice_config - Data associated with the llcc slice
+ * @usecase_id: Unique id for the client's use case
+ * @slice_id: llcc slice id for each client
+ * @max_cap: The maximum capacity of the cache slice provided in KB
+ * @priority: Priority of the client used to select victim line for replacement
+ * @fixed_size: Boolean indicating if the slice has a fixed capacity
+ * @bonus_ways: Bonus ways are additional ways to be used for any slice,
+ *		if client ends up using more than reserved cache ways. Bonus
+ *		ways are allocated only if they are not reserved for some
+ *		other client.
+ * @res_ways: Reserved ways for the cache slice, the reserved ways cannot
+ *		be used by any other client than the one its assigned to.
+ * @cache_mode: Each slice operates as a cache, this controls the mode of the
+ *             slice: normal or TCM(Tightly Coupled Memory)
+ * @probe_target_ways: Determines what ways to probe for access hit. When
+ *                    configured to 1 only bonus and reserved ways are probed.
+ *                    When configured to 0 all ways in llcc are probed.
+ * @dis_cap_alloc: Disable capacity based allocation for a client
+ * @retain_on_pc: If this bit is set and client has maintained active vote
+ *               then the ways assigned to this client are not flushed on power
+ *               collapse.
+ * @activate_on_init: Activate the slice immediately after it is programmed
+ */
+struct llcc_slice_config {
+	u32 usecase_id;
+	u32 slice_id;
+	u32 max_cap;
+	u32 priority;
+	bool fixed_size;
+	u32 bonus_ways;
+	u32 res_ways;
+	u32 cache_mode;
+	u32 probe_target_ways;
+	bool dis_cap_alloc;
+	bool retain_on_pc;
+	bool activate_on_init;
+};
+
+struct qcom_llcc_config {
+	const struct llcc_slice_config *sct_data;
+	int size;
+};
+
+static const struct llcc_slice_config sc7180_data[] =  {
+	{ LLCC_CPUSS,    1,  256, 1, 0, 0xf, 0x0, 0, 0, 0, 1, 1 },
+	{ LLCC_MDM,      8,  128, 1, 0, 0xf, 0x0, 0, 0, 0, 1, 0 },
+	{ LLCC_GPUHTW,   11, 128, 1, 0, 0xf, 0x0, 0, 0, 0, 1, 0 },
+	{ LLCC_GPU,      12, 128, 1, 0, 0xf, 0x0, 0, 0, 0, 1, 0 },
+};
+
+static const struct llcc_slice_config sdm845_data[] =  {
+	{ LLCC_CPUSS,    1,  2816, 1, 0, 0xffc, 0x2,   0, 0, 1, 1, 1 },
+	{ LLCC_VIDSC0,   2,  512,  2, 1, 0x0,   0x0f0, 0, 0, 1, 1, 0 },
+	{ LLCC_VIDSC1,   3,  512,  2, 1, 0x0,   0x0f0, 0, 0, 1, 1, 0 },
+	{ LLCC_ROTATOR,  4,  563,  2, 1, 0x0,   0x00e, 2, 0, 1, 1, 0 },
+	{ LLCC_VOICE,    5,  2816, 1, 0, 0xffc, 0x2,   0, 0, 1, 1, 0 },
+	{ LLCC_AUDIO,    6,  2816, 1, 0, 0xffc, 0x2,   0, 0, 1, 1, 0 },
+	{ LLCC_MDMHPGRW, 7,  1024, 2, 0, 0xfc,  0xf00, 0, 0, 1, 1, 0 },
+	{ LLCC_MDM,      8,  2816, 1, 0, 0xffc, 0x2,   0, 0, 1, 1, 0 },
+	{ LLCC_CMPT,     10, 2816, 1, 0, 0xffc, 0x2,   0, 0, 1, 1, 0 },
+	{ LLCC_GPUHTW,   11, 512,  1, 1, 0xc,   0x0,   0, 0, 1, 1, 0 },
+	{ LLCC_GPU,      12, 2304, 1, 0, 0xff0, 0x2,   0, 0, 1, 1, 0 },
+	{ LLCC_MMUHWT,   13, 256,  2, 0, 0x0,   0x1,   0, 0, 1, 0, 1 },
+	{ LLCC_CMPTDMA,  15, 2816, 1, 0, 0xffc, 0x2,   0, 0, 1, 1, 0 },
+	{ LLCC_DISP,     16, 2816, 1, 0, 0xffc, 0x2,   0, 0, 1, 1, 0 },
+	{ LLCC_VIDFW,    17, 2816, 1, 0, 0xffc, 0x2,   0, 0, 1, 1, 0 },
+	{ LLCC_MDMHPFX,  20, 1024, 2, 1, 0x0,   0xf00, 0, 0, 1, 1, 0 },
+	{ LLCC_MDMPNG,   21, 1024, 0, 1, 0x1e,  0x0,   0, 0, 1, 1, 0 },
+	{ LLCC_AUDHW,    22, 1024, 1, 1, 0xffc, 0x2,   0, 0, 1, 1, 0 },
+};
+
+static const struct qcom_llcc_config sc7180_cfg = {
+	.sct_data	= sc7180_data,
+	.size		= ARRAY_SIZE(sc7180_data),
+};
 
-static const struct regmap_config llcc_regmap_config = {
-	.reg_bits = 32,
-	.reg_stride = 4,
-	.val_bits = 32,
-	.fast_io = true,
+static const struct qcom_llcc_config sdm845_cfg = {
+	.sct_data	= sdm845_data,
+	.size		= ARRAY_SIZE(sdm845_data),
 };
 
+static struct llcc_drv_data *drv_data = (void *) -EPROBE_DEFER;
+
 /**
  * llcc_slice_getd - get llcc slice descriptor
  * @uid: usecase_id for the client
@@ -301,19 +377,24 @@ static int qcom_llcc_cfg_program(struct platform_device *pdev)
 	return ret;
 }
 
-int qcom_llcc_remove(struct platform_device *pdev)
+static int qcom_llcc_remove(struct platform_device *pdev)
 {
 	/* Set the global pointer to a error code to avoid referencing it */
 	drv_data = ERR_PTR(-ENODEV);
 	return 0;
 }
-EXPORT_SYMBOL_GPL(qcom_llcc_remove);
 
 static struct regmap *qcom_llcc_init_mmio(struct platform_device *pdev,
 		const char *name)
 {
 	struct resource *res;
 	void __iomem *base;
+	struct regmap_config llcc_regmap_config = {
+		.reg_bits = 32,
+		.reg_stride = 4,
+		.val_bits = 32,
+		.fast_io = true,
+	};
 
 	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, name);
 	if (!res)
@@ -323,16 +404,19 @@ static struct regmap *qcom_llcc_init_mmio(struct platform_device *pdev,
 	if (IS_ERR(base))
 		return ERR_CAST(base);
 
+	llcc_regmap_config.name = name;
 	return devm_regmap_init_mmio(&pdev->dev, base, &llcc_regmap_config);
 }
 
-int qcom_llcc_probe(struct platform_device *pdev,
-		      const struct llcc_slice_config *llcc_cfg, u32 sz)
+static int qcom_llcc_probe(struct platform_device *pdev)
 {
 	u32 num_banks;
 	struct device *dev = &pdev->dev;
 	int ret, i;
 	struct platform_device *llcc_edac;
+	const struct qcom_llcc_config *cfg;
+	const struct llcc_slice_config *llcc_cfg;
+	u32 sz;
 
 	drv_data = devm_kzalloc(dev, sizeof(*drv_data), GFP_KERNEL);
 	if (!drv_data) {
@@ -362,6 +446,10 @@ int qcom_llcc_probe(struct platform_device *pdev,
 	num_banks >>= LLCC_LB_CNT_SHIFT;
 	drv_data->num_banks = num_banks;
 
+	cfg = of_device_get_match_data(&pdev->dev);
+	llcc_cfg = cfg->sct_data;
+	sz = cfg->size;
+
 	for (i = 0; i < sz; i++)
 		if (llcc_cfg[i].slice_id > drv_data->max_slices)
 			drv_data->max_slices = llcc_cfg[i].slice_id;
@@ -407,6 +495,22 @@ err:
 	drv_data = ERR_PTR(-ENODEV);
 	return ret;
 }
-EXPORT_SYMBOL_GPL(qcom_llcc_probe);
-MODULE_LICENSE("GPL v2");
+
+static const struct of_device_id qcom_llcc_of_match[] = {
+	{ .compatible = "qcom,sc7180-llcc", .data = &sc7180_cfg },
+	{ .compatible = "qcom,sdm845-llcc", .data = &sdm845_cfg },
+	{ }
+};
+
+static struct platform_driver qcom_llcc_driver = {
+	.driver = {
+		.name = "qcom-llcc",
+		.of_match_table = qcom_llcc_of_match,
+	},
+	.probe = qcom_llcc_probe,
+	.remove = qcom_llcc_remove,
+};
+module_platform_driver(qcom_llcc_driver);
+
 MODULE_DESCRIPTION("Qualcomm Last Level Cache Controller");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/soc/qcom/llcc-sdm845.c b/drivers/soc/qcom/llcc-sdm845.c
deleted file mode 100644
index 86600d97c36d..000000000000
--- a/drivers/soc/qcom/llcc-sdm845.c
+++ /dev/null
@@ -1,100 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Copyright (c) 2017-2018, The Linux Foundation. All rights reserved.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/of.h>
-#include <linux/of_device.h>
-#include <linux/soc/qcom/llcc-qcom.h>
-
-/*
- * SCT(System Cache Table) entry contains of the following members:
- * usecase_id: Unique id for the client's use case
- * slice_id: llcc slice id for each client
- * max_cap: The maximum capacity of the cache slice provided in KB
- * priority: Priority of the client used to select victim line for replacement
- * fixed_size: Boolean indicating if the slice has a fixed capacity
- * bonus_ways: Bonus ways are additional ways to be used for any slice,
- *		if client ends up using more than reserved cache ways. Bonus
- *		ways are allocated only if they are not reserved for some
- *		other client.
- * res_ways: Reserved ways for the cache slice, the reserved ways cannot
- *		be used by any other client than the one its assigned to.
- * cache_mode: Each slice operates as a cache, this controls the mode of the
- *             slice: normal or TCM(Tightly Coupled Memory)
- * probe_target_ways: Determines what ways to probe for access hit. When
- *                    configured to 1 only bonus and reserved ways are probed.
- *                    When configured to 0 all ways in llcc are probed.
- * dis_cap_alloc: Disable capacity based allocation for a client
- * retain_on_pc: If this bit is set and client has maintained active vote
- *               then the ways assigned to this client are not flushed on power
- *               collapse.
- * activate_on_init: Activate the slice immediately after the SCT is programmed
- */
-#define SCT_ENTRY(uid, sid, mc, p, fs, bway, rway, cmod, ptw, dca, rp, a) \
-	{					\
-		.usecase_id = uid,		\
-		.slice_id = sid,		\
-		.max_cap = mc,			\
-		.priority = p,			\
-		.fixed_size = fs,		\
-		.bonus_ways = bway,		\
-		.res_ways = rway,		\
-		.cache_mode = cmod,		\
-		.probe_target_ways = ptw,	\
-		.dis_cap_alloc = dca,		\
-		.retain_on_pc = rp,		\
-		.activate_on_init = a,		\
-	}
-
-static struct llcc_slice_config sdm845_data[] =  {
-	SCT_ENTRY(LLCC_CPUSS,    1,  2816, 1, 0, 0xffc, 0x2,   0, 0, 1, 1, 1),
-	SCT_ENTRY(LLCC_VIDSC0,   2,  512,  2, 1, 0x0,   0x0f0, 0, 0, 1, 1, 0),
-	SCT_ENTRY(LLCC_VIDSC1,   3,  512,  2, 1, 0x0,   0x0f0, 0, 0, 1, 1, 0),
-	SCT_ENTRY(LLCC_ROTATOR,  4,  563,  2, 1, 0x0,   0x00e, 2, 0, 1, 1, 0),
-	SCT_ENTRY(LLCC_VOICE,    5,  2816, 1, 0, 0xffc, 0x2,   0, 0, 1, 1, 0),
-	SCT_ENTRY(LLCC_AUDIO,    6,  2816, 1, 0, 0xffc, 0x2,   0, 0, 1, 1, 0),
-	SCT_ENTRY(LLCC_MDMHPGRW, 7,  1024, 2, 0, 0xfc,  0xf00, 0, 0, 1, 1, 0),
-	SCT_ENTRY(LLCC_MDM,      8,  2816, 1, 0, 0xffc, 0x2,   0, 0, 1, 1, 0),
-	SCT_ENTRY(LLCC_CMPT,     10, 2816, 1, 0, 0xffc, 0x2,   0, 0, 1, 1, 0),
-	SCT_ENTRY(LLCC_GPUHTW,   11, 512,  1, 1, 0xc,   0x0,   0, 0, 1, 1, 0),
-	SCT_ENTRY(LLCC_GPU,      12, 2304, 1, 0, 0xff0, 0x2,   0, 0, 1, 1, 0),
-	SCT_ENTRY(LLCC_MMUHWT,   13, 256,  2, 0, 0x0,   0x1,   0, 0, 1, 0, 1),
-	SCT_ENTRY(LLCC_CMPTDMA,  15, 2816, 1, 0, 0xffc, 0x2,   0, 0, 1, 1, 0),
-	SCT_ENTRY(LLCC_DISP,     16, 2816, 1, 0, 0xffc, 0x2,   0, 0, 1, 1, 0),
-	SCT_ENTRY(LLCC_VIDFW,    17, 2816, 1, 0, 0xffc, 0x2,   0, 0, 1, 1, 0),
-	SCT_ENTRY(LLCC_MDMHPFX,  20, 1024, 2, 1, 0x0,   0xf00, 0, 0, 1, 1, 0),
-	SCT_ENTRY(LLCC_MDMPNG,   21, 1024, 0, 1, 0x1e,  0x0,   0, 0, 1, 1, 0),
-	SCT_ENTRY(LLCC_AUDHW,    22, 1024, 1, 1, 0xffc, 0x2,   0, 0, 1, 1, 0),
-};
-
-static int sdm845_qcom_llcc_remove(struct platform_device *pdev)
-{
-	return qcom_llcc_remove(pdev);
-}
-
-static int sdm845_qcom_llcc_probe(struct platform_device *pdev)
-{
-	return qcom_llcc_probe(pdev, sdm845_data, ARRAY_SIZE(sdm845_data));
-}
-
-static const struct of_device_id sdm845_qcom_llcc_of_match[] = {
-	{ .compatible = "qcom,sdm845-llcc", },
-	{ }
-};
-
-static struct platform_driver sdm845_qcom_llcc_driver = {
-	.driver = {
-		.name = "sdm845-llcc",
-		.of_match_table = sdm845_qcom_llcc_of_match,
-	},
-	.probe = sdm845_qcom_llcc_probe,
-	.remove = sdm845_qcom_llcc_remove,
-};
-module_platform_driver(sdm845_qcom_llcc_driver);
-
-MODULE_DESCRIPTION("QCOM sdm845 LLCC driver");
-MODULE_LICENSE("GPL v2");
diff --git a/drivers/soc/qcom/qcom_aoss.c b/drivers/soc/qcom/qcom_aoss.c
index 33a27e6c6d67..006ac40c526a 100644
--- a/drivers/soc/qcom/qcom_aoss.c
+++ b/drivers/soc/qcom/qcom_aoss.c
@@ -44,7 +44,7 @@
 
 #define QMP_NUM_COOLING_RESOURCES	2
 
-static bool qmp_cdev_init_state = 1;
+static bool qmp_cdev_max_state = 1;
 
 struct qmp_cooling_device {
 	struct thermal_cooling_device *cdev;
@@ -402,7 +402,7 @@ static void qmp_pd_remove(struct qmp *qmp)
 static int qmp_cdev_get_max_state(struct thermal_cooling_device *cdev,
 				  unsigned long *state)
 {
-	*state = qmp_cdev_init_state;
+	*state = qmp_cdev_max_state;
 	return 0;
 }
 
@@ -432,7 +432,7 @@ static int qmp_cdev_set_cur_state(struct thermal_cooling_device *cdev,
 	snprintf(buf, sizeof(buf),
 		 "{class: volt_flr, event:zero_temp, res:%s, value:%s}",
 			qmp_cdev->name,
-			cdev_state ? "off" : "on");
+			cdev_state ? "on" : "off");
 
 	ret = qmp_send(qmp_cdev->qmp, buf, sizeof(buf));
 
@@ -455,7 +455,7 @@ static int qmp_cooling_device_add(struct qmp *qmp,
 	char *cdev_name = (char *)node->name;
 
 	qmp_cdev->qmp = qmp;
-	qmp_cdev->state = qmp_cdev_init_state;
+	qmp_cdev->state = !qmp_cdev_max_state;
 	qmp_cdev->name = cdev_name;
 	qmp_cdev->cdev = devm_thermal_of_cooling_device_register
 				(qmp->dev, node,
diff --git a/drivers/soc/qcom/rpmpd.c b/drivers/soc/qcom/rpmpd.c
index 3c1a55cf25d6..2b1834c5609a 100644
--- a/drivers/soc/qcom/rpmpd.c
+++ b/drivers/soc/qcom/rpmpd.c
@@ -115,6 +115,28 @@ struct rpmpd_desc {
 
 static DEFINE_MUTEX(rpmpd_lock);
 
+/* msm8976 RPM Power Domains */
+DEFINE_RPMPD_PAIR(msm8976, vddcx, vddcx_ao, SMPA, LEVEL, 2);
+DEFINE_RPMPD_PAIR(msm8976, vddmx, vddmx_ao, SMPA, LEVEL, 6);
+
+DEFINE_RPMPD_VFL(msm8976, vddcx_vfl, RWSC, 2);
+DEFINE_RPMPD_VFL(msm8976, vddmx_vfl, RWSM, 6);
+
+static struct rpmpd *msm8976_rpmpds[] = {
+	[MSM8976_VDDCX] =	&msm8976_vddcx,
+	[MSM8976_VDDCX_AO] =	&msm8976_vddcx_ao,
+	[MSM8976_VDDCX_VFL] =	&msm8976_vddcx_vfl,
+	[MSM8976_VDDMX] =	&msm8976_vddmx,
+	[MSM8976_VDDMX_AO] =	&msm8976_vddmx_ao,
+	[MSM8976_VDDMX_VFL] =	&msm8976_vddmx_vfl,
+};
+
+static const struct rpmpd_desc msm8976_desc = {
+	.rpmpds = msm8976_rpmpds,
+	.num_pds = ARRAY_SIZE(msm8976_rpmpds),
+	.max_state = RPM_SMD_LEVEL_TURBO_HIGH,
+};
+
 /* msm8996 RPM Power domains */
 DEFINE_RPMPD_PAIR(msm8996, vddcx, vddcx_ao, SMPA, CORNER, 1);
 DEFINE_RPMPD_PAIR(msm8996, vddmx, vddmx_ao, SMPA, CORNER, 2);
@@ -198,6 +220,7 @@ static const struct rpmpd_desc qcs404_desc = {
 };
 
 static const struct of_device_id rpmpd_match_table[] = {
+	{ .compatible = "qcom,msm8976-rpmpd", .data = &msm8976_desc },
 	{ .compatible = "qcom,msm8996-rpmpd", .data = &msm8996_desc },
 	{ .compatible = "qcom,msm8998-rpmpd", .data = &msm8998_desc },
 	{ .compatible = "qcom,qcs404-rpmpd", .data = &qcs404_desc },
diff --git a/drivers/soc/qcom/smd-rpm.c b/drivers/soc/qcom/smd-rpm.c
index fa9dd12b5e39..005dd30c58fa 100644
--- a/drivers/soc/qcom/smd-rpm.c
+++ b/drivers/soc/qcom/smd-rpm.c
@@ -19,12 +19,14 @@
 /**
  * struct qcom_smd_rpm - state of the rpm device driver
  * @rpm_channel:	reference to the smd channel
+ * @icc:		interconnect proxy device
  * @ack:		completion for acks
  * @lock:		mutual exclusion around the send/complete pair
  * @ack_status:		result of the rpm request
  */
 struct qcom_smd_rpm {
 	struct rpmsg_endpoint *rpm_channel;
+	struct platform_device *icc;
 	struct device *dev;
 
 	struct completion ack;
@@ -193,6 +195,7 @@ static int qcom_smd_rpm_callback(struct rpmsg_device *rpdev,
 static int qcom_smd_rpm_probe(struct rpmsg_device *rpdev)
 {
 	struct qcom_smd_rpm *rpm;
+	int ret;
 
 	rpm = devm_kzalloc(&rpdev->dev, sizeof(*rpm), GFP_KERNEL);
 	if (!rpm)
@@ -205,11 +208,23 @@ static int qcom_smd_rpm_probe(struct rpmsg_device *rpdev)
 	rpm->rpm_channel = rpdev->ept;
 	dev_set_drvdata(&rpdev->dev, rpm);
 
-	return of_platform_populate(rpdev->dev.of_node, NULL, NULL, &rpdev->dev);
+	rpm->icc = platform_device_register_data(&rpdev->dev, "icc_smd_rpm", -1,
+						 NULL, 0);
+	if (IS_ERR(rpm->icc))
+		return PTR_ERR(rpm->icc);
+
+	ret = of_platform_populate(rpdev->dev.of_node, NULL, NULL, &rpdev->dev);
+	if (ret)
+		platform_device_unregister(rpm->icc);
+
+	return ret;
 }
 
 static void qcom_smd_rpm_remove(struct rpmsg_device *rpdev)
 {
+	struct qcom_smd_rpm *rpm = dev_get_drvdata(&rpdev->dev);
+
+	platform_device_unregister(rpm->icc);
 	of_platform_depopulate(&rpdev->dev);
 }
 
@@ -217,6 +232,7 @@ static const struct of_device_id qcom_smd_rpm_of_match[] = {
 	{ .compatible = "qcom,rpm-apq8084" },
 	{ .compatible = "qcom,rpm-msm8916" },
 	{ .compatible = "qcom,rpm-msm8974" },
+	{ .compatible = "qcom,rpm-msm8976" },
 	{ .compatible = "qcom,rpm-msm8996" },
 	{ .compatible = "qcom,rpm-msm8998" },
 	{ .compatible = "qcom,rpm-sdm660" },
diff --git a/drivers/soc/qcom/socinfo.c b/drivers/soc/qcom/socinfo.c
index a39ea5061dc5..7864b75ce569 100644
--- a/drivers/soc/qcom/socinfo.c
+++ b/drivers/soc/qcom/socinfo.c
@@ -198,6 +198,8 @@ static const struct soc_id soc_id[] = {
 	{ 310, "MSM8996AU" },
 	{ 311, "APQ8096AU" },
 	{ 312, "APQ8096SG" },
+	{ 321, "SDM845" },
+	{ 341, "SDA845" },
 };
 
 static const char *socinfo_machine(struct device *dev, unsigned int id)
diff --git a/drivers/soc/renesas/Kconfig b/drivers/soc/renesas/Kconfig
index 3c5e017bacba..f93492b72c04 100644
--- a/drivers/soc/renesas/Kconfig
+++ b/drivers/soc/renesas/Kconfig
@@ -178,6 +178,13 @@ config ARCH_R8A774A1
 	help
 	  This enables support for the Renesas RZ/G2M SoC.
 
+config ARCH_R8A774B1
+	bool "Renesas RZ/G2N SoC Platform"
+	select ARCH_RCAR_GEN3
+	select SYSC_R8A774B1
+	help
+	  This enables support for the Renesas RZ/G2N SoC.
+
 config ARCH_R8A774C0
 	bool "Renesas RZ/G2E SoC Platform"
 	select ARCH_RCAR_GEN3
@@ -192,13 +199,24 @@ config ARCH_R8A7795
 	help
 	  This enables support for the Renesas R-Car H3 SoC.
 
+config ARCH_R8A77960
+	bool
+	select ARCH_RCAR_GEN3
+	select SYSC_R8A77960
+
 config ARCH_R8A7796
 	bool "Renesas R-Car M3-W SoC Platform"
-	select ARCH_RCAR_GEN3
-	select SYSC_R8A7796
+	select ARCH_R8A77960
 	help
 	  This enables support for the Renesas R-Car M3-W SoC.
 
+config ARCH_R8A77961
+	bool "Renesas R-Car M3-W+ SoC Platform"
+	select ARCH_RCAR_GEN3
+	select SYSC_R8A77961
+	help
+	  This enables support for the Renesas R-Car M3-W+ SoC.
+
 config ARCH_R8A77965
 	bool "Renesas R-Car M3-N SoC Platform"
 	select ARCH_RCAR_GEN3
@@ -253,6 +271,10 @@ config SYSC_R8A774A1
 	bool "RZ/G2M System Controller support" if COMPILE_TEST
 	select SYSC_RCAR
 
+config SYSC_R8A774B1
+	bool "RZ/G2N System Controller support" if COMPILE_TEST
+	select SYSC_RCAR
+
 config SYSC_R8A774C0
 	bool "RZ/G2E System Controller support" if COMPILE_TEST
 	select SYSC_RCAR
@@ -281,10 +303,14 @@ config SYSC_R8A7795
 	bool "R-Car H3 System Controller support" if COMPILE_TEST
 	select SYSC_RCAR
 
-config SYSC_R8A7796
+config SYSC_R8A77960
 	bool "R-Car M3-W System Controller support" if COMPILE_TEST
 	select SYSC_RCAR
 
+config SYSC_R8A77961
+	bool "R-Car M3-W+ System Controller support" if COMPILE_TEST
+	select SYSC_RCAR
+
 config SYSC_R8A77965
 	bool "R-Car M3-N System Controller support" if COMPILE_TEST
 	select SYSC_RCAR
diff --git a/drivers/soc/renesas/Makefile b/drivers/soc/renesas/Makefile
index 00764d5a60b3..e595c3c3bd10 100644
--- a/drivers/soc/renesas/Makefile
+++ b/drivers/soc/renesas/Makefile
@@ -7,6 +7,7 @@ obj-$(CONFIG_SYSC_R8A7743)	+= r8a7743-sysc.o
 obj-$(CONFIG_SYSC_R8A7745)	+= r8a7745-sysc.o
 obj-$(CONFIG_SYSC_R8A77470)	+= r8a77470-sysc.o
 obj-$(CONFIG_SYSC_R8A774A1)	+= r8a774a1-sysc.o
+obj-$(CONFIG_SYSC_R8A774B1)	+= r8a774b1-sysc.o
 obj-$(CONFIG_SYSC_R8A774C0)	+= r8a774c0-sysc.o
 obj-$(CONFIG_SYSC_R8A7779)	+= r8a7779-sysc.o
 obj-$(CONFIG_SYSC_R8A7790)	+= r8a7790-sysc.o
@@ -14,7 +15,8 @@ obj-$(CONFIG_SYSC_R8A7791)	+= r8a7791-sysc.o
 obj-$(CONFIG_SYSC_R8A7792)	+= r8a7792-sysc.o
 obj-$(CONFIG_SYSC_R8A7794)	+= r8a7794-sysc.o
 obj-$(CONFIG_SYSC_R8A7795)	+= r8a7795-sysc.o
-obj-$(CONFIG_SYSC_R8A7796)	+= r8a7796-sysc.o
+obj-$(CONFIG_SYSC_R8A77960)	+= r8a7796-sysc.o
+obj-$(CONFIG_SYSC_R8A77961)	+= r8a7796-sysc.o
 obj-$(CONFIG_SYSC_R8A77965)	+= r8a77965-sysc.o
 obj-$(CONFIG_SYSC_R8A77970)	+= r8a77970-sysc.o
 obj-$(CONFIG_SYSC_R8A77980)	+= r8a77980-sysc.o
diff --git a/drivers/soc/renesas/r8a7743-sysc.c b/drivers/soc/renesas/r8a7743-sysc.c
index edf6436e879f..4e2c0ab951b3 100644
--- a/drivers/soc/renesas/r8a7743-sysc.c
+++ b/drivers/soc/renesas/r8a7743-sysc.c
@@ -5,7 +5,6 @@
  * Copyright (C) 2016 Cogent Embedded Inc.
  */
 
-#include <linux/bug.h>
 #include <linux/kernel.h>
 
 #include <dt-bindings/power/r8a7743-sysc.h>
diff --git a/drivers/soc/renesas/r8a7745-sysc.c b/drivers/soc/renesas/r8a7745-sysc.c
index 65dc6b09cc85..865821a2f0c6 100644
--- a/drivers/soc/renesas/r8a7745-sysc.c
+++ b/drivers/soc/renesas/r8a7745-sysc.c
@@ -5,7 +5,6 @@
  * Copyright (C) 2016 Cogent Embedded Inc.
  */
 
-#include <linux/bug.h>
 #include <linux/kernel.h>
 
 #include <dt-bindings/power/r8a7745-sysc.h>
diff --git a/drivers/soc/renesas/r8a77470-sysc.c b/drivers/soc/renesas/r8a77470-sysc.c
index cfa015e208ef..1eeb8018df50 100644
--- a/drivers/soc/renesas/r8a77470-sysc.c
+++ b/drivers/soc/renesas/r8a77470-sysc.c
@@ -5,7 +5,6 @@
  * Copyright (C) 2018 Renesas Electronics Corp.
  */
 
-#include <linux/bug.h>
 #include <linux/kernel.h>
 
 #include <dt-bindings/power/r8a77470-sysc.h>
diff --git a/drivers/soc/renesas/r8a774a1-sysc.c b/drivers/soc/renesas/r8a774a1-sysc.c
index 9db51ff6f5ed..38ac2c689ff0 100644
--- a/drivers/soc/renesas/r8a774a1-sysc.c
+++ b/drivers/soc/renesas/r8a774a1-sysc.c
@@ -7,7 +7,6 @@
  * Copyright (C) 2016 Glider bvba
  */
 
-#include <linux/bug.h>
 #include <linux/kernel.h>
 
 #include <dt-bindings/power/r8a774a1-sysc.h>
diff --git a/drivers/soc/renesas/r8a774b1-sysc.c b/drivers/soc/renesas/r8a774b1-sysc.c
new file mode 100644
index 000000000000..5f97ff26f3f8
--- /dev/null
+++ b/drivers/soc/renesas/r8a774b1-sysc.c
@@ -0,0 +1,37 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Renesas RZ/G2N System Controller
+ * Copyright (C) 2019 Renesas Electronics Corp.
+ *
+ * Based on Renesas R-Car M3-W System Controller
+ * Copyright (C) 2016 Glider bvba
+ */
+
+#include <linux/bits.h>
+#include <linux/kernel.h>
+
+#include <dt-bindings/power/r8a774b1-sysc.h>
+
+#include "rcar-sysc.h"
+
+static const struct rcar_sysc_area r8a774b1_areas[] __initconst = {
+	{ "always-on",	    0, 0, R8A774B1_PD_ALWAYS_ON, -1, PD_ALWAYS_ON },
+	{ "ca57-scu",	0x1c0, 0, R8A774B1_PD_CA57_SCU,	R8A774B1_PD_ALWAYS_ON,
+	  PD_SCU },
+	{ "ca57-cpu0",	 0x80, 0, R8A774B1_PD_CA57_CPU0, R8A774B1_PD_CA57_SCU,
+	  PD_CPU_NOCR },
+	{ "ca57-cpu1",	 0x80, 1, R8A774B1_PD_CA57_CPU1, R8A774B1_PD_CA57_SCU,
+	  PD_CPU_NOCR },
+	{ "a3vc",	0x380, 0, R8A774B1_PD_A3VC,	R8A774B1_PD_ALWAYS_ON },
+	{ "a3vp",	0x340, 0, R8A774B1_PD_A3VP,	R8A774B1_PD_ALWAYS_ON },
+	{ "a2vc1",	0x3c0, 1, R8A774B1_PD_A2VC1,	R8A774B1_PD_A3VC },
+	{ "3dg-a",	0x100, 0, R8A774B1_PD_3DG_A,	R8A774B1_PD_ALWAYS_ON },
+	{ "3dg-b",	0x100, 1, R8A774B1_PD_3DG_B,	R8A774B1_PD_3DG_A },
+};
+
+const struct rcar_sysc_info r8a774b1_sysc_info __initconst = {
+	.areas = r8a774b1_areas,
+	.num_areas = ARRAY_SIZE(r8a774b1_areas),
+	.extmask_offs = 0x2f8,
+	.extmask_val = BIT(0),
+};
diff --git a/drivers/soc/renesas/r8a774c0-sysc.c b/drivers/soc/renesas/r8a774c0-sysc.c
index 11050e17ea81..c1c216f7d073 100644
--- a/drivers/soc/renesas/r8a774c0-sysc.c
+++ b/drivers/soc/renesas/r8a774c0-sysc.c
@@ -6,7 +6,7 @@
  * Based on Renesas R-Car E3 System Controller
  */
 
-#include <linux/bug.h>
+#include <linux/bits.h>
 #include <linux/kernel.h>
 #include <linux/sys_soc.h>
 
@@ -50,4 +50,6 @@ const struct rcar_sysc_info r8a774c0_sysc_info __initconst = {
 	.init = r8a774c0_sysc_init,
 	.areas = r8a774c0_areas,
 	.num_areas = ARRAY_SIZE(r8a774c0_areas),
+	.extmask_offs = 0x2f8,
+	.extmask_val = BIT(0),
 };
diff --git a/drivers/soc/renesas/r8a7779-sysc.c b/drivers/soc/renesas/r8a7779-sysc.c
index 517aa40fa6e6..e24a7151d55f 100644
--- a/drivers/soc/renesas/r8a7779-sysc.c
+++ b/drivers/soc/renesas/r8a7779-sysc.c
@@ -5,7 +5,6 @@
  * Copyright (C) 2016 Glider bvba
  */
 
-#include <linux/bug.h>
 #include <linux/kernel.h>
 
 #include <dt-bindings/power/r8a7779-sysc.h>
diff --git a/drivers/soc/renesas/r8a7790-sysc.c b/drivers/soc/renesas/r8a7790-sysc.c
index 9b5a6bb62152..b9afe7f6245b 100644
--- a/drivers/soc/renesas/r8a7790-sysc.c
+++ b/drivers/soc/renesas/r8a7790-sysc.c
@@ -5,7 +5,6 @@
  * Copyright (C) 2016 Glider bvba
  */
 
-#include <linux/bug.h>
 #include <linux/kernel.h>
 
 #include <dt-bindings/power/r8a7790-sysc.h>
diff --git a/drivers/soc/renesas/r8a7791-sysc.c b/drivers/soc/renesas/r8a7791-sysc.c
index acf545cdebfb..f00fa24522a3 100644
--- a/drivers/soc/renesas/r8a7791-sysc.c
+++ b/drivers/soc/renesas/r8a7791-sysc.c
@@ -5,7 +5,6 @@
  * Copyright (C) 2016 Glider bvba
  */
 
-#include <linux/bug.h>
 #include <linux/kernel.h>
 
 #include <dt-bindings/power/r8a7791-sysc.h>
diff --git a/drivers/soc/renesas/r8a7792-sysc.c b/drivers/soc/renesas/r8a7792-sysc.c
index 05b78525cc43..60aae242c43f 100644
--- a/drivers/soc/renesas/r8a7792-sysc.c
+++ b/drivers/soc/renesas/r8a7792-sysc.c
@@ -5,7 +5,6 @@
  * Copyright (C) 2016 Cogent Embedded Inc.
  */
 
-#include <linux/bug.h>
 #include <linux/init.h>
 #include <linux/kernel.h>
 
diff --git a/drivers/soc/renesas/r8a7794-sysc.c b/drivers/soc/renesas/r8a7794-sysc.c
index 0d42637fa662..72ef4e85458f 100644
--- a/drivers/soc/renesas/r8a7794-sysc.c
+++ b/drivers/soc/renesas/r8a7794-sysc.c
@@ -5,7 +5,6 @@
  * Copyright (C) 2016 Glider bvba
  */
 
-#include <linux/bug.h>
 #include <linux/kernel.h>
 
 #include <dt-bindings/power/r8a7794-sysc.h>
diff --git a/drivers/soc/renesas/r8a7795-sysc.c b/drivers/soc/renesas/r8a7795-sysc.c
index cda27a67de98..91074411b8cf 100644
--- a/drivers/soc/renesas/r8a7795-sysc.c
+++ b/drivers/soc/renesas/r8a7795-sysc.c
@@ -5,7 +5,7 @@
  * Copyright (C) 2016-2017 Glider bvba
  */
 
-#include <linux/bug.h>
+#include <linux/bits.h>
 #include <linux/kernel.h>
 #include <linux/sys_soc.h>
 
@@ -51,25 +51,46 @@ static struct rcar_sysc_area r8a7795_areas[] __initdata = {
 
 
 	/*
-	 * Fixups for R-Car H3 revisions after ES1.x
+	 * Fixups for R-Car H3 revisions
 	 */
 
-static const struct soc_device_attribute r8a7795es1[] __initconst = {
-	{ .soc_id = "r8a7795", .revision = "ES1.*" },
+#define HAS_A2VC0	BIT(0)		/* Power domain A2VC0 is present */
+#define NO_EXTMASK	BIT(1)		/* Missing SYSCEXTMASK register */
+
+static const struct soc_device_attribute r8a7795_quirks_match[] __initconst = {
+	{
+		.soc_id = "r8a7795", .revision = "ES1.*",
+		.data = (void *)(HAS_A2VC0 | NO_EXTMASK),
+	}, {
+		.soc_id = "r8a7795", .revision = "ES2.*",
+		.data = (void *)(NO_EXTMASK),
+	},
 	{ /* sentinel */ }
 };
 
 static int __init r8a7795_sysc_init(void)
 {
-	if (!soc_device_match(r8a7795es1))
+	const struct soc_device_attribute *attr;
+	u32 quirks = 0;
+
+	attr = soc_device_match(r8a7795_quirks_match);
+	if (attr)
+		quirks = (uintptr_t)attr->data;
+
+	if (!(quirks & HAS_A2VC0))
 		rcar_sysc_nullify(r8a7795_areas, ARRAY_SIZE(r8a7795_areas),
 				  R8A7795_PD_A2VC0);
 
+	if (quirks & NO_EXTMASK)
+		r8a7795_sysc_info.extmask_val = 0;
+
 	return 0;
 }
 
-const struct rcar_sysc_info r8a7795_sysc_info __initconst = {
+struct rcar_sysc_info r8a7795_sysc_info __initdata = {
 	.init = r8a7795_sysc_init,
 	.areas = r8a7795_areas,
 	.num_areas = ARRAY_SIZE(r8a7795_areas),
+	.extmask_offs = 0x2f8,
+	.extmask_val = BIT(0),
 };
diff --git a/drivers/soc/renesas/r8a7796-sysc.c b/drivers/soc/renesas/r8a7796-sysc.c
index 1b06f868b6e8..471bd5b3b6ad 100644
--- a/drivers/soc/renesas/r8a7796-sysc.c
+++ b/drivers/soc/renesas/r8a7796-sysc.c
@@ -1,18 +1,19 @@
 // SPDX-License-Identifier: GPL-2.0
 /*
- * Renesas R-Car M3-W System Controller
+ * Renesas R-Car M3-W/W+ System Controller
  *
  * Copyright (C) 2016 Glider bvba
+ * Copyright (C) 2018-2019 Renesas Electronics Corporation
  */
 
-#include <linux/bug.h>
+#include <linux/bits.h>
 #include <linux/kernel.h>
 
 #include <dt-bindings/power/r8a7796-sysc.h>
 
 #include "rcar-sysc.h"
 
-static const struct rcar_sysc_area r8a7796_areas[] __initconst = {
+static struct rcar_sysc_area r8a7796_areas[] __initdata = {
 	{ "always-on",	    0, 0, R8A7796_PD_ALWAYS_ON,	-1, PD_ALWAYS_ON },
 	{ "ca57-scu",	0x1c0, 0, R8A7796_PD_CA57_SCU,	R8A7796_PD_ALWAYS_ON,
 	  PD_SCU },
@@ -39,7 +40,28 @@ static const struct rcar_sysc_area r8a7796_areas[] __initconst = {
 	{ "a3ir",	0x180, 0, R8A7796_PD_A3IR,	R8A7796_PD_ALWAYS_ON },
 };
 
-const struct rcar_sysc_info r8a7796_sysc_info __initconst = {
+
+#ifdef CONFIG_SYSC_R8A77960
+const struct rcar_sysc_info r8a77960_sysc_info __initconst = {
+	.areas = r8a7796_areas,
+	.num_areas = ARRAY_SIZE(r8a7796_areas),
+};
+#endif /* CONFIG_SYSC_R8A77960 */
+
+#ifdef CONFIG_SYSC_R8A77961
+static int __init r8a77961_sysc_init(void)
+{
+	rcar_sysc_nullify(r8a7796_areas, ARRAY_SIZE(r8a7796_areas),
+			  R8A7796_PD_A2VC0);
+
+	return 0;
+}
+
+const struct rcar_sysc_info r8a77961_sysc_info __initconst = {
+	.init = r8a77961_sysc_init,
 	.areas = r8a7796_areas,
 	.num_areas = ARRAY_SIZE(r8a7796_areas),
+	.extmask_offs = 0x2f8,
+	.extmask_val = BIT(0),
 };
+#endif /* CONFIG_SYSC_R8A77961 */
diff --git a/drivers/soc/renesas/r8a77965-sysc.c b/drivers/soc/renesas/r8a77965-sysc.c
index e0533beb50fd..ff0b0d116992 100644
--- a/drivers/soc/renesas/r8a77965-sysc.c
+++ b/drivers/soc/renesas/r8a77965-sysc.c
@@ -7,7 +7,7 @@
  * Copyright (C) 2016 Glider bvba
  */
 
-#include <linux/bug.h>
+#include <linux/bits.h>
 #include <linux/kernel.h>
 
 #include <dt-bindings/power/r8a77965-sysc.h>
@@ -33,4 +33,6 @@ static const struct rcar_sysc_area r8a77965_areas[] __initconst = {
 const struct rcar_sysc_info r8a77965_sysc_info __initconst = {
 	.areas = r8a77965_areas,
 	.num_areas = ARRAY_SIZE(r8a77965_areas),
+	.extmask_offs = 0x2f8,
+	.extmask_val = BIT(0),
 };
diff --git a/drivers/soc/renesas/r8a77970-sysc.c b/drivers/soc/renesas/r8a77970-sysc.c
index 280c48b80f24..706258250600 100644
--- a/drivers/soc/renesas/r8a77970-sysc.c
+++ b/drivers/soc/renesas/r8a77970-sysc.c
@@ -5,7 +5,7 @@
  * Copyright (C) 2017 Cogent Embedded Inc.
  */
 
-#include <linux/bug.h>
+#include <linux/bits.h>
 #include <linux/kernel.h>
 
 #include <dt-bindings/power/r8a77970-sysc.h>
@@ -32,4 +32,6 @@ static const struct rcar_sysc_area r8a77970_areas[] __initconst = {
 const struct rcar_sysc_info r8a77970_sysc_info __initconst = {
 	.areas = r8a77970_areas,
 	.num_areas = ARRAY_SIZE(r8a77970_areas),
+	.extmask_offs = 0x1b0,
+	.extmask_val = BIT(0),
 };
diff --git a/drivers/soc/renesas/r8a77980-sysc.c b/drivers/soc/renesas/r8a77980-sysc.c
index a8dbe55e8ba8..39ca84a67daa 100644
--- a/drivers/soc/renesas/r8a77980-sysc.c
+++ b/drivers/soc/renesas/r8a77980-sysc.c
@@ -6,7 +6,7 @@
  * Copyright (C) 2018 Cogent Embedded, Inc.
  */
 
-#include <linux/bug.h>
+#include <linux/bits.h>
 #include <linux/kernel.h>
 
 #include <dt-bindings/power/r8a77980-sysc.h>
@@ -49,4 +49,6 @@ static const struct rcar_sysc_area r8a77980_areas[] __initconst = {
 const struct rcar_sysc_info r8a77980_sysc_info __initconst = {
 	.areas = r8a77980_areas,
 	.num_areas = ARRAY_SIZE(r8a77980_areas),
+	.extmask_offs = 0x138,
+	.extmask_val = BIT(0),
 };
diff --git a/drivers/soc/renesas/r8a77990-sysc.c b/drivers/soc/renesas/r8a77990-sysc.c
index 664b244eb1dd..9f92737dc352 100644
--- a/drivers/soc/renesas/r8a77990-sysc.c
+++ b/drivers/soc/renesas/r8a77990-sysc.c
@@ -5,7 +5,7 @@
  * Copyright (C) 2018 Renesas Electronics Corp.
  */
 
-#include <linux/bug.h>
+#include <linux/bits.h>
 #include <linux/kernel.h>
 #include <linux/sys_soc.h>
 
@@ -50,4 +50,6 @@ const struct rcar_sysc_info r8a77990_sysc_info __initconst = {
 	.init = r8a77990_sysc_init,
 	.areas = r8a77990_areas,
 	.num_areas = ARRAY_SIZE(r8a77990_areas),
+	.extmask_offs = 0x2f8,
+	.extmask_val = BIT(0),
 };
diff --git a/drivers/soc/renesas/r8a77995-sysc.c b/drivers/soc/renesas/r8a77995-sysc.c
index 6243aaaf60fb..efcc67e3d76d 100644
--- a/drivers/soc/renesas/r8a77995-sysc.c
+++ b/drivers/soc/renesas/r8a77995-sysc.c
@@ -5,7 +5,6 @@
  * Copyright (C) 2017 Glider bvba
  */
 
-#include <linux/bug.h>
 #include <linux/kernel.h>
 
 #include <dt-bindings/power/r8a77995-sysc.h>
diff --git a/drivers/soc/renesas/rcar-rst.c b/drivers/soc/renesas/rcar-rst.c
index d183c381e8db..14d05a070dd3 100644
--- a/drivers/soc/renesas/rcar-rst.c
+++ b/drivers/soc/renesas/rcar-rst.c
@@ -45,6 +45,7 @@ static const struct of_device_id rcar_rst_matches[] __initconst = {
 	{ .compatible = "renesas,r8a77470-rst", .data = &rcar_rst_gen2 },
 	/* RZ/G2 is handled like R-Car Gen3 */
 	{ .compatible = "renesas,r8a774a1-rst", .data = &rcar_rst_gen3 },
+	{ .compatible = "renesas,r8a774b1-rst", .data = &rcar_rst_gen3 },
 	{ .compatible = "renesas,r8a774c0-rst", .data = &rcar_rst_gen3 },
 	/* R-Car Gen1 */
 	{ .compatible = "renesas,r8a7778-reset-wdt", .data = &rcar_rst_gen1 },
@@ -58,6 +59,7 @@ static const struct of_device_id rcar_rst_matches[] __initconst = {
 	/* R-Car Gen3 */
 	{ .compatible = "renesas,r8a7795-rst", .data = &rcar_rst_gen3 },
 	{ .compatible = "renesas,r8a7796-rst", .data = &rcar_rst_gen3 },
+	{ .compatible = "renesas,r8a77961-rst", .data = &rcar_rst_gen3 },
 	{ .compatible = "renesas,r8a77965-rst", .data = &rcar_rst_gen3 },
 	{ .compatible = "renesas,r8a77970-rst", .data = &rcar_rst_gen3 },
 	{ .compatible = "renesas,r8a77980-rst", .data = &rcar_rst_gen3 },
diff --git a/drivers/soc/renesas/rcar-sysc.c b/drivers/soc/renesas/rcar-sysc.c
index 59b5e6b10272..f0b291e02b8a 100644
--- a/drivers/soc/renesas/rcar-sysc.c
+++ b/drivers/soc/renesas/rcar-sysc.c
@@ -63,6 +63,7 @@ struct rcar_sysc_ch {
 
 static void __iomem *rcar_sysc_base;
 static DEFINE_SPINLOCK(rcar_sysc_lock); /* SMP CPUs + I/O devices */
+static u32 rcar_sysc_extmask_offs, rcar_sysc_extmask_val;
 
 static int rcar_sysc_pwr_on_off(const struct rcar_sysc_ch *sysc_ch, bool on)
 {
@@ -106,6 +107,14 @@ static int rcar_sysc_power(const struct rcar_sysc_ch *sysc_ch, bool on)
 	spin_lock_irqsave(&rcar_sysc_lock, flags);
 
 	/*
+	 * Mask external power requests for CPU or 3DG domains
+	 */
+	if (rcar_sysc_extmask_val) {
+		iowrite32(rcar_sysc_extmask_val,
+			  rcar_sysc_base + rcar_sysc_extmask_offs);
+	}
+
+	/*
 	 * The interrupt source needs to be enabled, but masked, to prevent the
 	 * CPU from receiving it.
 	 */
@@ -148,6 +157,9 @@ static int rcar_sysc_power(const struct rcar_sysc_ch *sysc_ch, bool on)
 	iowrite32(isr_mask, rcar_sysc_base + SYSCISCR);
 
  out:
+	if (rcar_sysc_extmask_val)
+		iowrite32(0, rcar_sysc_base + rcar_sysc_extmask_offs);
+
 	spin_unlock_irqrestore(&rcar_sysc_lock, flags);
 
 	pr_debug("sysc power %s domain %d: %08x -> %d\n", on ? "on" : "off",
@@ -275,6 +287,9 @@ static const struct of_device_id rcar_sysc_matches[] __initconst = {
 #ifdef CONFIG_SYSC_R8A774A1
 	{ .compatible = "renesas,r8a774a1-sysc", .data = &r8a774a1_sysc_info },
 #endif
+#ifdef CONFIG_SYSC_R8A774B1
+	{ .compatible = "renesas,r8a774b1-sysc", .data = &r8a774b1_sysc_info },
+#endif
 #ifdef CONFIG_SYSC_R8A774C0
 	{ .compatible = "renesas,r8a774c0-sysc", .data = &r8a774c0_sysc_info },
 #endif
@@ -298,8 +313,11 @@ static const struct of_device_id rcar_sysc_matches[] __initconst = {
 #ifdef CONFIG_SYSC_R8A7795
 	{ .compatible = "renesas,r8a7795-sysc", .data = &r8a7795_sysc_info },
 #endif
-#ifdef CONFIG_SYSC_R8A7796
-	{ .compatible = "renesas,r8a7796-sysc", .data = &r8a7796_sysc_info },
+#ifdef CONFIG_SYSC_R8A77960
+	{ .compatible = "renesas,r8a7796-sysc", .data = &r8a77960_sysc_info },
+#endif
+#ifdef CONFIG_SYSC_R8A77961
+	{ .compatible = "renesas,r8a77961-sysc", .data = &r8a77961_sysc_info },
 #endif
 #ifdef CONFIG_SYSC_R8A77965
 	{ .compatible = "renesas,r8a77965-sysc", .data = &r8a77965_sysc_info },
@@ -360,6 +378,10 @@ static int __init rcar_sysc_pd_init(void)
 
 	rcar_sysc_base = base;
 
+	/* Optional External Request Mask Register */
+	rcar_sysc_extmask_offs = info->extmask_offs;
+	rcar_sysc_extmask_val = info->extmask_val;
+
 	domains = kzalloc(sizeof(*domains), GFP_KERNEL);
 	if (!domains) {
 		error = -ENOMEM;
diff --git a/drivers/soc/renesas/rcar-sysc.h b/drivers/soc/renesas/rcar-sysc.h
index 485520a5b295..8d074489fba9 100644
--- a/drivers/soc/renesas/rcar-sysc.h
+++ b/drivers/soc/renesas/rcar-sysc.h
@@ -44,20 +44,25 @@ struct rcar_sysc_info {
 	int (*init)(void);	/* Optional */
 	const struct rcar_sysc_area *areas;
 	unsigned int num_areas;
+	/* Optional External Request Mask Register */
+	u32 extmask_offs;	/* SYSCEXTMASK register offset */
+	u32 extmask_val;	/* SYSCEXTMASK register mask value */
 };
 
 extern const struct rcar_sysc_info r8a7743_sysc_info;
 extern const struct rcar_sysc_info r8a7745_sysc_info;
 extern const struct rcar_sysc_info r8a77470_sysc_info;
 extern const struct rcar_sysc_info r8a774a1_sysc_info;
+extern const struct rcar_sysc_info r8a774b1_sysc_info;
 extern const struct rcar_sysc_info r8a774c0_sysc_info;
 extern const struct rcar_sysc_info r8a7779_sysc_info;
 extern const struct rcar_sysc_info r8a7790_sysc_info;
 extern const struct rcar_sysc_info r8a7791_sysc_info;
 extern const struct rcar_sysc_info r8a7792_sysc_info;
 extern const struct rcar_sysc_info r8a7794_sysc_info;
-extern const struct rcar_sysc_info r8a7795_sysc_info;
-extern const struct rcar_sysc_info r8a7796_sysc_info;
+extern struct rcar_sysc_info r8a7795_sysc_info;
+extern const struct rcar_sysc_info r8a77960_sysc_info;
+extern const struct rcar_sysc_info r8a77961_sysc_info;
 extern const struct rcar_sysc_info r8a77965_sysc_info;
 extern const struct rcar_sysc_info r8a77970_sysc_info;
 extern const struct rcar_sysc_info r8a77980_sysc_info;
diff --git a/drivers/soc/renesas/renesas-soc.c b/drivers/soc/renesas/renesas-soc.c
index 3299cf5365f3..850f5733dc88 100644
--- a/drivers/soc/renesas/renesas-soc.c
+++ b/drivers/soc/renesas/renesas-soc.c
@@ -116,6 +116,11 @@ static const struct renesas_soc soc_rz_g2m __initconst __maybe_unused = {
 	.id	= 0x52,
 };
 
+static const struct renesas_soc soc_rz_g2n __initconst __maybe_unused = {
+	.family = &fam_rzg2,
+	.id     = 0x55,
+};
+
 static const struct renesas_soc soc_rz_g2e __initconst __maybe_unused = {
 	.family	= &fam_rzg2,
 	.id	= 0x57,
@@ -227,6 +232,9 @@ static const struct of_device_id renesas_socs[] __initconst = {
 #ifdef CONFIG_ARCH_R8A774A1
 	{ .compatible = "renesas,r8a774a1",	.data = &soc_rz_g2m },
 #endif
+#ifdef CONFIG_ARCH_R8A774B1
+	{ .compatible = "renesas,r8a774b1",	.data = &soc_rz_g2n },
+#endif
 #ifdef CONFIG_ARCH_R8A774C0
 	{ .compatible = "renesas,r8a774c0",	.data = &soc_rz_g2e },
 #endif
@@ -254,9 +262,12 @@ static const struct of_device_id renesas_socs[] __initconst = {
 #ifdef CONFIG_ARCH_R8A7795
 	{ .compatible = "renesas,r8a7795",	.data = &soc_rcar_h3 },
 #endif
-#ifdef CONFIG_ARCH_R8A7796
+#ifdef CONFIG_ARCH_R8A77960
 	{ .compatible = "renesas,r8a7796",	.data = &soc_rcar_m3_w },
 #endif
+#ifdef CONFIG_ARCH_R8A77961
+	{ .compatible = "renesas,r8a77961",	.data = &soc_rcar_m3_w },
+#endif
 #ifdef CONFIG_ARCH_R8A77965
 	{ .compatible = "renesas,r8a77965",	.data = &soc_rcar_m3_n },
 #endif
@@ -326,7 +337,7 @@ static int __init renesas_soc_init(void)
 	if (np) {
 		chipid = of_iomap(np, 0);
 		of_node_put(np);
-	} else if (soc->id) {
+	} else if (soc->id && family->reg) {
 		chipid = ioremap(family->reg, 4);
 	}
 	if (chipid) {
diff --git a/drivers/soc/samsung/Kconfig b/drivers/soc/samsung/Kconfig
index 33ad0de2de3c..27fc59bbb520 100644
--- a/drivers/soc/samsung/Kconfig
+++ b/drivers/soc/samsung/Kconfig
@@ -7,6 +7,16 @@ menuconfig SOC_SAMSUNG
 
 if SOC_SAMSUNG
 
+config EXYNOS_ASV
+	bool "Exynos Adaptive Supply Voltage support" if COMPILE_TEST
+	depends on (ARCH_EXYNOS && EXYNOS_CHIPID) || COMPILE_TEST
+	select EXYNOS_ASV_ARM if ARM && ARCH_EXYNOS
+
+# There is no need to enable these drivers for ARMv8
+config EXYNOS_ASV_ARM
+	bool "Exynos ASV ARMv7-specific driver extensions" if COMPILE_TEST
+	depends on EXYNOS_ASV
+
 config EXYNOS_CHIPID
 	bool "Exynos Chipid controller driver" if COMPILE_TEST
 	depends on ARCH_EXYNOS || COMPILE_TEST
diff --git a/drivers/soc/samsung/Makefile b/drivers/soc/samsung/Makefile
index 3b6a8797416c..edd1d6ea064d 100644
--- a/drivers/soc/samsung/Makefile
+++ b/drivers/soc/samsung/Makefile
@@ -1,5 +1,8 @@
 # SPDX-License-Identifier: GPL-2.0
 
+obj-$(CONFIG_EXYNOS_ASV)	+= exynos-asv.o
+obj-$(CONFIG_EXYNOS_ASV_ARM)	+= exynos5422-asv.o
+
 obj-$(CONFIG_EXYNOS_CHIPID)	+= exynos-chipid.o
 obj-$(CONFIG_EXYNOS_PMU)	+= exynos-pmu.o
 
diff --git a/drivers/soc/samsung/exynos-asv.c b/drivers/soc/samsung/exynos-asv.c
new file mode 100644
index 000000000000..30bb7b7cc769
--- /dev/null
+++ b/drivers/soc/samsung/exynos-asv.c
@@ -0,0 +1,177 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2019 Samsung Electronics Co., Ltd.
+ *	      http://www.samsung.com/
+ * Author: Sylwester Nawrocki <s.nawrocki@samsung.com>
+ *
+ * Samsung Exynos SoC Adaptive Supply Voltage support
+ */
+
+#include <linux/cpu.h>
+#include <linux/device.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/pm_opp.h>
+#include <linux/regmap.h>
+#include <linux/soc/samsung/exynos-chipid.h>
+
+#include "exynos-asv.h"
+#include "exynos5422-asv.h"
+
+#define MHZ 1000000U
+
+static int exynos_asv_update_cpu_opps(struct exynos_asv *asv,
+				      struct device *cpu)
+{
+	struct exynos_asv_subsys *subsys = NULL;
+	struct dev_pm_opp *opp;
+	unsigned int opp_freq;
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(asv->subsys); i++) {
+		if (of_device_is_compatible(cpu->of_node,
+					    asv->subsys[i].cpu_dt_compat)) {
+			subsys = &asv->subsys[i];
+			break;
+		}
+	}
+	if (!subsys)
+		return -EINVAL;
+
+	for (i = 0; i < subsys->table.num_rows; i++) {
+		unsigned int new_volt, volt;
+		int ret;
+
+		opp_freq = exynos_asv_opp_get_frequency(subsys, i);
+
+		opp = dev_pm_opp_find_freq_exact(cpu, opp_freq * MHZ, true);
+		if (IS_ERR(opp)) {
+			dev_info(asv->dev, "cpu%d opp%d, freq: %u missing\n",
+				 cpu->id, i, opp_freq);
+
+			continue;
+		}
+
+		volt = dev_pm_opp_get_voltage(opp);
+		new_volt = asv->opp_get_voltage(subsys, i, volt);
+		dev_pm_opp_put(opp);
+
+		if (new_volt == volt)
+			continue;
+
+		ret = dev_pm_opp_adjust_voltage(cpu, opp_freq * MHZ,
+						new_volt, new_volt, new_volt);
+		if (ret < 0)
+			dev_err(asv->dev,
+				"Failed to adjust OPP %u Hz/%u uV for cpu%d\n",
+				opp_freq, new_volt, cpu->id);
+		else
+			dev_dbg(asv->dev,
+				"Adjusted OPP %u Hz/%u -> %u uV, cpu%d\n",
+				opp_freq, volt, new_volt, cpu->id);
+	}
+
+	return 0;
+}
+
+static int exynos_asv_update_opps(struct exynos_asv *asv)
+{
+	struct opp_table *last_opp_table = NULL;
+	struct device *cpu;
+	int ret, cpuid;
+
+	for_each_possible_cpu(cpuid) {
+		struct opp_table *opp_table;
+
+		cpu = get_cpu_device(cpuid);
+		if (!cpu)
+			continue;
+
+		opp_table = dev_pm_opp_get_opp_table(cpu);
+		if (IS_ERR_OR_NULL(opp_table))
+			continue;
+
+		if (!last_opp_table || opp_table != last_opp_table) {
+			last_opp_table = opp_table;
+
+			ret = exynos_asv_update_cpu_opps(asv, cpu);
+			if (ret < 0)
+				dev_err(asv->dev, "Couldn't udate OPPs for cpu%d\n",
+					cpuid);
+		}
+
+		dev_pm_opp_put_opp_table(opp_table);
+	}
+
+	return	0;
+}
+
+static int exynos_asv_probe(struct platform_device *pdev)
+{
+	int (*probe_func)(struct exynos_asv *asv);
+	struct exynos_asv *asv;
+	struct device *cpu_dev;
+	u32 product_id = 0;
+	int ret, i;
+
+	cpu_dev = get_cpu_device(0);
+	ret = dev_pm_opp_get_opp_count(cpu_dev);
+	if (ret < 0)
+		return -EPROBE_DEFER;
+
+	asv = devm_kzalloc(&pdev->dev, sizeof(*asv), GFP_KERNEL);
+	if (!asv)
+		return -ENOMEM;
+
+	asv->chipid_regmap = device_node_to_regmap(pdev->dev.of_node);
+	if (IS_ERR(asv->chipid_regmap)) {
+		dev_err(&pdev->dev, "Could not find syscon regmap\n");
+		return PTR_ERR(asv->chipid_regmap);
+	}
+
+	regmap_read(asv->chipid_regmap, EXYNOS_CHIPID_REG_PRO_ID, &product_id);
+
+	switch (product_id & EXYNOS_MASK) {
+	case 0xE5422000:
+		probe_func = exynos5422_asv_init;
+		break;
+	default:
+		return -ENODEV;
+	}
+
+	ret = of_property_read_u32(pdev->dev.of_node, "samsung,asv-bin",
+				   &asv->of_bin);
+	if (ret < 0)
+		asv->of_bin = -EINVAL;
+
+	asv->dev = &pdev->dev;
+	dev_set_drvdata(&pdev->dev, asv);
+
+	for (i = 0; i < ARRAY_SIZE(asv->subsys); i++)
+		asv->subsys[i].asv = asv;
+
+	ret = probe_func(asv);
+	if (ret < 0)
+		return ret;
+
+	return exynos_asv_update_opps(asv);
+}
+
+static const struct of_device_id exynos_asv_of_device_ids[] = {
+	{ .compatible = "samsung,exynos4210-chipid" },
+	{}
+};
+
+static struct platform_driver exynos_asv_driver = {
+	.driver = {
+		.name = "exynos-asv",
+		.of_match_table = exynos_asv_of_device_ids,
+	},
+	.probe	= exynos_asv_probe,
+};
+module_platform_driver(exynos_asv_driver);
diff --git a/drivers/soc/samsung/exynos-asv.h b/drivers/soc/samsung/exynos-asv.h
new file mode 100644
index 000000000000..3fd1f2acd999
--- /dev/null
+++ b/drivers/soc/samsung/exynos-asv.h
@@ -0,0 +1,71 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2019 Samsung Electronics Co., Ltd.
+ *	      http://www.samsung.com/
+ * Author: Sylwester Nawrocki <s.nawrocki@samsung.com>
+ *
+ * Samsung Exynos SoC Adaptive Supply Voltage support
+ */
+#ifndef __LINUX_SOC_EXYNOS_ASV_H
+#define __LINUX_SOC_EXYNOS_ASV_H
+
+struct regmap;
+
+/* HPM, IDS values to select target group */
+struct asv_limit_entry {
+	unsigned int hpm;
+	unsigned int ids;
+};
+
+struct exynos_asv_table {
+	unsigned int num_rows;
+	unsigned int num_cols;
+	u32 *buf;
+};
+
+struct exynos_asv_subsys {
+	struct exynos_asv *asv;
+	const char *cpu_dt_compat;
+	int id;
+	struct exynos_asv_table table;
+
+	unsigned int base_volt;
+	unsigned int offset_volt_h;
+	unsigned int offset_volt_l;
+};
+
+struct exynos_asv {
+	struct device *dev;
+	struct regmap *chipid_regmap;
+	struct exynos_asv_subsys subsys[2];
+
+	int (*opp_get_voltage)(const struct exynos_asv_subsys *subs,
+			       int level, unsigned int voltage);
+	unsigned int group;
+	unsigned int table;
+
+	/* True if SG fields from PKG_ID register should be used */
+	bool use_sg;
+	/* ASV bin read from DT */
+	int of_bin;
+};
+
+static inline u32 __asv_get_table_entry(const struct exynos_asv_table *table,
+					unsigned int row, unsigned int col)
+{
+	return table->buf[row * (table->num_cols) + col];
+}
+
+static inline u32 exynos_asv_opp_get_voltage(const struct exynos_asv_subsys *subsys,
+					unsigned int level, unsigned int group)
+{
+	return __asv_get_table_entry(&subsys->table, level, group + 1);
+}
+
+static inline u32 exynos_asv_opp_get_frequency(const struct exynos_asv_subsys *subsys,
+					unsigned int level)
+{
+	return __asv_get_table_entry(&subsys->table, level, 0);
+}
+
+#endif /* __LINUX_SOC_EXYNOS_ASV_H */
diff --git a/drivers/soc/samsung/exynos-chipid.c b/drivers/soc/samsung/exynos-chipid.c
index c55a47cfe617..b89c26a71c6e 100644
--- a/drivers/soc/samsung/exynos-chipid.c
+++ b/drivers/soc/samsung/exynos-chipid.c
@@ -45,17 +45,25 @@ static const char * __init product_id_to_soc_id(unsigned int product_id)
 	return NULL;
 }
 
-int __init exynos_chipid_early_init(void)
+static int __init exynos_chipid_early_init(void)
 {
 	struct soc_device_attribute *soc_dev_attr;
 	struct soc_device *soc_dev;
 	struct device_node *root;
+	struct device_node *syscon;
 	struct regmap *regmap;
 	u32 product_id;
 	u32 revision;
 	int ret;
 
-	regmap = syscon_regmap_lookup_by_compatible("samsung,exynos4210-chipid");
+	syscon = of_find_compatible_node(NULL, NULL,
+					 "samsung,exynos4210-chipid");
+	if (!syscon)
+		return ENODEV;
+
+	regmap = device_node_to_regmap(syscon);
+	of_node_put(syscon);
+
 	if (IS_ERR(regmap))
 		return PTR_ERR(regmap);
 
diff --git a/drivers/soc/samsung/exynos5422-asv.c b/drivers/soc/samsung/exynos5422-asv.c
new file mode 100644
index 000000000000..01bb3050d678
--- /dev/null
+++ b/drivers/soc/samsung/exynos5422-asv.c
@@ -0,0 +1,505 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2019 Samsung Electronics Co., Ltd.
+ *	      http://www.samsung.com/
+ *
+ * Samsung Exynos 5422 SoC Adaptive Supply Voltage support
+ */
+
+#include <linux/bitrev.h>
+#include <linux/errno.h>
+#include <linux/regmap.h>
+#include <linux/soc/samsung/exynos-chipid.h>
+#include <linux/slab.h>
+
+#include "exynos-asv.h"
+#include "exynos5422-asv.h"
+
+#define ASV_GROUPS_NUM		14
+#define ASV_ARM_DVFS_NUM	20
+#define ASV_ARM_BIN2_DVFS_NUM	17
+#define ASV_KFC_DVFS_NUM	14
+#define ASV_KFC_BIN2_DVFS_NUM	12
+
+/*
+ * This array is a set of 4 ASV data tables, first column of each ASV table
+ * contains frequency value in MHz and subsequent columns contain the CPU
+ * cluster's supply voltage values in uV.
+ * In order to create a set of OPPs for specific SoC revision one of the voltage
+ * columns (1...14) from one of the tables (0...3) is selected during
+ * initialization. There are separate ASV tables for the big (ARM) and little
+ * (KFC) CPU cluster. Only OPPs which are already defined in devicetree
+ * will be updated.
+ */
+
+static const u32 asv_arm_table[][ASV_ARM_DVFS_NUM][ASV_GROUPS_NUM + 1] = {
+{
+	/* ARM 0, 1 */
+	{ 2100,    1362500, 1362500, 1350000, 1337500, 1325000, 1312500, 1300000,
+	  1275000, 1262500, 1250000, 1237500, 1225000, 1212500, 1200000 },
+	{ 2000,    1312500, 1312500, 1300000, 1287500, 1275000, 1262500, 1250000,
+	  1237500, 1225000, 1237500, 1225000, 1212500, 1200000, 1187500 },
+	{ 1900,    1250000, 1237500, 1225000, 1212500, 1200000, 1187500, 1175000,
+	  1162500, 1150000, 1162500, 1150000, 1137500, 1125000, 1112500 },
+	{ 1800,    1200000, 1187500, 1175000, 1162500, 1150000, 1137500, 1125000,
+	  1112500, 1100000, 1112500, 1100000, 1087500, 1075000, 1062500 },
+	{ 1700,    1162500, 1150000, 1137500, 1125000, 1112500, 1100000, 1087500,
+	  1075000, 1062500, 1075000, 1062500, 1050000, 1037500, 1025000 },
+	{ 1600,    1125000, 1112500, 1100000, 1087500, 1075000, 1062500, 1050000,
+	  1037500, 1025000, 1037500, 1025000, 1012500, 1000000, 987500 },
+	{ 1500,    1087500, 1075000, 1062500, 1050000, 1037500, 1025000, 1012500,
+	  1000000, 987500,  1000000, 987500,  975000,  962500,  950000 },
+	{ 1400,    1062500, 1050000, 1037500, 1025000, 1012500, 1000000, 987500,
+	  975000,  962500,  975000,  962500,  950000,  937500,  925000 },
+	{ 1300,    1050000, 1037500, 1025000, 1012500, 1000000, 987500,  975000,
+	  962500,  950000,  962500,  950000,  937500,  925000,  912500 },
+	{ 1200,    1025000, 1012500, 1000000, 987500,  975000,  962500,  950000,
+	  937500,  925000,  937500,  925000,  912500,  900000,  900000 },
+	{ 1100,    1000000, 987500,  975000,  962500,  950000,  937500,  925000,
+	  912500,  900000,  900000,  900000,  900000,  900000,  900000 },
+	{ 1000,    975000,  962500,  950000,  937500,  925000,  912500,  900000,
+	  900000,  900000,  900000,  900000,  900000,  900000,  900000 },
+	{ 900,     950000,  937500,  925000,  912500,  900000,  900000,  900000,
+	  900000,  900000,  900000,  900000,  900000,  900000,  900000 },
+	{ 800,     925000,  912500,  900000,  900000,  900000,  900000,  900000,
+	  900000,  900000,  900000,  900000,  900000,  900000,  900000 },
+	{ 700,     900000,  900000,  900000,  900000,  900000,  900000,  900000,
+	  900000,  900000,  900000,  900000,  900000,  900000,  900000 },
+	{ 600,     900000,  900000,  900000,  900000,  900000,  900000,  900000,
+	  900000,  900000,  900000,  900000,  900000,  900000,  900000 },
+	{ 500,     900000,  900000,  900000,  900000,  900000,  900000,  900000,
+	  900000,  900000,  900000,  900000,  900000,  900000,  900000 },
+	{ 400,     900000,  900000,  900000,  900000,  900000,  900000,  900000,
+	  900000,  900000,  900000,  900000,  900000,  900000,  900000 },
+	{ 300,     900000,  900000,  900000,  900000,  900000,  900000,  900000,
+	  900000,  900000,  900000,  900000,  900000,  900000,  900000 },
+	{ 200,     900000,  900000,  900000,  900000,  900000,  900000,  900000,
+	  900000,  900000,  900000,  900000,  900000,  900000,  900000 },
+}, {
+	/* ARM 2 */
+	{ 2100,    1362500, 1362500, 1350000, 1337500, 1325000, 1312500, 1300000,
+	  1275000, 1262500, 1250000, 1237500, 1225000, 1212500, 1200000 },
+	{ 2000,    1312500, 1312500, 1312500, 1300000, 1275000, 1262500, 1250000,
+	  1237500, 1225000, 1237500, 1225000, 1212500, 1200000, 1187500 },
+	{ 1900,    1262500, 1250000, 1250000, 1237500, 1212500, 1200000, 1187500,
+	  1175000, 1162500, 1175000, 1162500, 1150000, 1137500, 1125000 },
+	{ 1800,    1212500, 1200000, 1187500, 1175000, 1162500, 1150000, 1137500,
+	  1125000, 1112500, 1125000, 1112500, 1100000, 1087500, 1075000 },
+	{ 1700,    1175000, 1162500, 1150000, 1137500, 1125000, 1112500, 1100000,
+	  1087500, 1075000, 1087500, 1075000, 1062500, 1050000, 1037500 },
+	{ 1600,    1137500, 1125000, 1112500, 1100000, 1087500, 1075000, 1062500,
+	  1050000, 1037500, 1050000, 1037500, 1025000, 1012500, 1000000 },
+	{ 1500,    1100000, 1087500, 1075000, 1062500, 1050000, 1037500, 1025000,
+	  1012500, 1000000, 1012500, 1000000, 987500,  975000,  962500 },
+	{ 1400,    1075000, 1062500, 1050000, 1037500, 1025000, 1012500, 1000000,
+	  987500,  975000,  987500,  975000,  962500,  950000,  937500 },
+	{ 1300,    1050000, 1037500, 1025000, 1012500, 1000000, 987500,  975000,
+	  962500,  950000,  962500,  950000,  937500,  925000,  912500 },
+	{ 1200,    1025000, 1012500, 1000000, 987500,  975000,  962500,  950000,
+	  937500,  925000,  937500,  925000,  912500,  900000,  900000 },
+	{ 1100,    1000000, 987500,  975000,  962500,  950000,  937500,  925000,
+	  912500,  900000,  900000,  900000,  900000,  900000,  900000 },
+	{ 1000,    975000,  962500,  950000,  937500,  925000,  912500,  900000,
+	  900000,  900000,  900000,  900000,  900000,  900000,  900000 },
+	{ 900,     950000,  937500,  925000,  912500,  900000,  900000,  900000,
+	  900000,  900000,  900000,  900000,  900000,  900000,  900000 },
+	{ 800,     925000,  912500,  900000,  900000,  900000,  900000,  900000,
+	  900000,  900000,  900000,  900000,  900000,  900000,  900000 },
+	{ 700,     900000,  900000,  900000,  900000,  900000,  900000,  900000,
+	  900000,  900000,  900000,  900000,  900000,  900000,  900000 },
+	{ 600,     900000,  900000,  900000,  900000,  900000,  900000,  900000,
+	  900000,  900000,  900000,  900000,  900000,  900000,  900000 },
+	{ 500,     900000,  900000,  900000,  900000,  900000,  900000,  900000,
+	  900000,  900000,  900000,  900000,  900000,  900000,  900000 },
+	{ 400,     900000,  900000,  900000,  900000,  900000,  900000,  900000,
+	  900000,  900000,  900000,  900000,  900000,  900000,  900000 },
+	{ 300,     900000,  900000,  900000,  900000,  900000,  900000,  900000,
+	  900000,  900000,  900000,  900000,  900000,  900000,  900000 },
+	{ 200,     900000,  900000,  900000,  900000,  900000,  900000,  900000,
+	  900000,  900000,  900000,  900000,  900000,  900000,  900000 },
+}, {
+	/* ARM 3 */
+	{ 2100,    1362500, 1362500, 1350000, 1337500, 1325000, 1312500, 1300000,
+	  1275000, 1262500, 1250000, 1237500, 1225000, 1212500, 1200000 },
+	{ 2000,    1312500, 1312500, 1300000, 1287500, 1275000, 1262500, 1250000,
+	  1237500, 1225000, 1237500, 1225000, 1212500, 1200000, 1187500 },
+	{ 1900,    1262500, 1250000, 1237500, 1225000, 1212500, 1200000, 1187500,
+	  1175000, 1162500, 1175000, 1162500, 1150000, 1137500, 1125000 },
+	{ 1800,    1212500, 1200000, 1187500, 1175000, 1162500, 1150000, 1137500,
+	  1125000, 1112500, 1125000, 1112500, 1100000, 1087500, 1075000 },
+	{ 1700,    1175000, 1162500, 1150000, 1137500, 1125000, 1112500, 1100000,
+	  1087500, 1075000, 1087500, 1075000, 1062500, 1050000, 1037500 },
+	{ 1600,    1137500, 1125000, 1112500, 1100000, 1087500, 1075000, 1062500,
+	  1050000, 1037500, 1050000, 1037500, 1025000, 1012500, 1000000 },
+	{ 1500,    1100000, 1087500, 1075000, 1062500, 1050000, 1037500, 1025000,
+	  1012500, 1000000, 1012500, 1000000, 987500,  975000,  962500 },
+	{ 1400,    1075000, 1062500, 1050000, 1037500, 1025000, 1012500, 1000000,
+	  987500,  975000,  987500,  975000,  962500,  950000,  937500 },
+	{ 1300,    1050000, 1037500, 1025000, 1012500, 1000000, 987500,  975000,
+	  962500,  950000,  962500,  950000,  937500,  925000,  912500 },
+	{ 1200,    1025000, 1012500, 1000000, 987500,  975000,  962500,  950000,
+	  937500,  925000,  937500,  925000,  912500,  900000,  900000 },
+	{ 1100,    1000000, 987500,  975000,  962500,  950000,  937500,  925000,
+	  912500,  900000,  900000,  900000,  900000,  900000,  900000 },
+	{ 1000,    975000,  962500,  950000,  937500,  925000,  912500,  900000,
+	  900000,  900000,  900000,  900000,  900000,  900000,  900000 },
+	{ 900,     950000,  937500,  925000,  912500,  900000,  900000,  900000,
+	  900000,  900000,  900000,  900000,  900000,  900000,  900000 },
+	{ 800,     925000,  912500,  900000,  900000,  900000,  900000,  900000,
+	  900000,  900000,  900000,  900000,  900000,  900000,  900000 },
+	{ 700,     900000,  900000,  900000,  900000,  900000,  900000,  900000,
+	  900000,  900000,  900000,  900000,  900000,  900000,  900000 },
+	{ 600,     900000,  900000,  900000,  900000,  900000,  900000,  900000,
+	  900000,  900000,  900000,  900000,  900000,  900000,  900000 },
+	{ 500,     900000,  900000,  900000,  900000,  900000,  900000,  900000,
+	  900000,  900000,  900000,  900000,  900000,  900000,  900000 },
+	{ 400,     900000,  900000,  900000,  900000,  900000,  900000,  900000,
+	  900000,  900000,  900000,  900000,  900000,  900000,  900000 },
+	{ 300,     900000,  900000,  900000,  900000,  900000,  900000,  900000,
+	  900000,  900000,  900000,  900000,  900000,  900000,  900000 },
+	{ 200,     900000,  900000,  900000,  900000,  900000,  900000,  900000,
+	  900000,  900000,  900000,  900000,  900000,  900000,  900000 },
+}, {
+	/* ARM bin 2 */
+	{ 1800,    1237500, 1225000, 1212500, 1200000, 1187500, 1175000, 1162500,
+	  1150000, 1137500, 1150000, 1137500, 1125000, 1112500, 1100000 },
+	{ 1700,    1200000, 1187500, 1175000, 1162500, 1150000, 1137500, 1125000,
+	  1112500, 1100000, 1112500, 1100000, 1087500, 1075000, 1062500 },
+	{ 1600,    1162500, 1150000, 1137500, 1125000, 1112500, 1100000, 1087500,
+	  1075000, 1062500, 1075000, 1062500, 1050000, 1037500, 1025000 },
+	{ 1500,    1125000, 1112500, 1100000, 1087500, 1075000, 1062500, 1050000,
+	  1037500, 1025000, 1037500, 1025000, 1012500, 1000000, 987500 },
+	{ 1400,    1100000, 1087500, 1075000, 1062500, 1050000, 1037500, 1025000,
+	  1012500, 1000000, 1012500, 1000000, 987500,  975000,  962500 },
+	{ 1300,    1087500, 1075000, 1062500, 1050000, 1037500, 1025000, 1012500,
+	  1000000, 987500,  1000000, 987500,  975000,  962500,  950000 },
+	{ 1200,    1062500, 1050000, 1037500, 1025000, 1012500, 1000000, 987500,
+	  975000,  962500,  975000,  962500,  950000,  937500,  925000 },
+	{ 1100,    1037500, 1025000, 1012500, 1000000, 987500,  975000,  962500,
+	  950000,  937500,  950000,  937500,  925000,  912500,  900000 },
+	{ 1000,    1012500, 1000000, 987500,  975000,  962500,  950000,  937500,
+	  925000,  912500,  925000,  912500,  900000,  900000,  900000 },
+	{ 900,     987500,  975000,  962500,  950000,  937500,  925000,  912500,
+	  900000,  900000,  900000,  900000,  900000,  900000,  900000 },
+	{ 800,     962500,  950000,  937500,  925000,  912500,  900000,  900000,
+	  900000,  900000,  900000,  900000,  900000,  900000,  900000 },
+	{ 700,     937500,  925000,  912500,  900000,  900000,  900000,  900000,
+	  900000,  900000,  900000,  900000,  900000,  900000,  900000 },
+	{ 600,     900000,  900000,  900000,  900000,  900000,  900000,  900000,
+	  900000,  900000,  900000,  900000,  900000,  900000,  900000 },
+	{ 500,     900000,  900000,  900000,  900000,  900000,  900000,  900000,
+	  900000,  900000,  900000,  900000,  900000,  900000,  900000 },
+	{ 400,     900000,  900000,  900000,  900000,  900000,  900000,  900000,
+	  900000,  900000,  900000,  900000,  900000,  900000,  900000 },
+	{ 300,     900000,  900000,  900000,  900000,  900000,  900000,  900000,
+	  900000,  900000,  900000,  900000,  900000,  900000,  900000 },
+	{ 200,     900000,  900000,  900000,  900000,  900000,  900000,  900000,
+	  900000,  900000,  900000,  900000,  900000,  900000,  900000 },
+}
+};
+
+static const u32 asv_kfc_table[][ASV_KFC_DVFS_NUM][ASV_GROUPS_NUM + 1] = {
+{
+	/* KFC 0, 1 */
+	{ 1500000, 1300000, 1300000, 1300000, 1287500, 1287500, 1287500, 1275000,
+	  1262500, 1250000, 1237500, 1225000, 1212500, 1200000, 1187500 },
+	{ 1400000, 1275000, 1262500, 1250000, 1237500, 1225000, 1212500, 1200000,
+	  1187500, 1175000, 1162500, 1150000, 1137500, 1125000, 1112500 },
+	{ 1300000, 1225000, 1212500, 1200000, 1187500, 1175000, 1162500, 1150000,
+	  1137500, 1125000, 1112500, 1100000, 1087500, 1075000, 1062500 },
+	{ 1200000, 1175000, 1162500, 1150000, 1137500, 1125000, 1112500, 1100000,
+	  1087500, 1075000, 1062500, 1050000, 1037500, 1025000, 1012500 },
+	{ 1100000, 1137500, 1125000, 1112500, 1100000, 1087500, 1075000, 1062500,
+	  1050000, 1037500, 1025000, 1012500, 1000000, 987500,  975000 },
+	{ 1000000, 1100000, 1087500, 1075000, 1062500, 1050000, 1037500, 1025000,
+	  1012500, 1000000, 987500,  975000,  962500,  950000,  937500 },
+	{ 900000,  1062500, 1050000, 1037500, 1025000, 1012500, 1000000, 987500,
+	  975000,  962500,  950000,  937500,  925000,  912500,  900000 },
+	{ 800000,  1025000, 1012500, 1000000, 987500,  975000,  962500,  950000,
+	  937500,  925000,  912500,  900000,  900000,  900000,  900000 },
+	{ 700000,  987500,  975000,  962500,  950000,  937500,  925000,  912500,
+	  900000,  900000,  900000,  900000,  900000,  900000,  900000 },
+	{ 600000,  950000,  937500,  925000,  912500,  900000,  900000,  900000,
+	  900000,  900000,  900000,  900000,  900000,  900000,  900000 },
+	{ 500000,  912500,  900000,  900000,  900000,  900000,  900000,  900000,
+	  900000,  900000,  900000,  900000,  900000,  900000,  900000 },
+	{ 400000,  900000,  900000,  900000,  900000,  900000,  900000,  900000,
+	  900000,  900000,  900000,  900000,  900000,  900000,  900000 },
+	{ 300000,  900000,  900000,  900000,  900000,  900000,  900000,  900000,
+	  900000,  900000,  900000,  900000,  900000,  900000,  900000 },
+	{ 200000,  900000,  900000,  900000,  900000,  900000,  900000,  900000,
+	  900000,  900000,  900000,  900000,  900000,  900000,  900000 },
+}, {
+	/* KFC 2 */
+	{ 1500,    1300000, 1300000, 1300000, 1287500, 1287500, 1287500, 1275000,
+	  1262500, 1250000, 1237500, 1225000, 1212500, 1200000, 1187500 },
+	{ 1400,    1275000, 1262500, 1250000, 1237500, 1225000, 1212500, 1200000,
+	  1187500, 1175000, 1162500, 1150000, 1137500, 1125000, 1112500 },
+	{ 1300,    1225000, 1212500, 1200000, 1187500, 1175000, 1162500, 1150000,
+	  1137500, 1125000, 1112500, 1100000, 1087500, 1075000, 1062500 },
+	{ 1200,    1175000, 1162500, 1150000, 1137500, 1125000, 1112500, 1100000,
+	  1087500, 1075000, 1062500, 1050000, 1037500, 1025000, 1012500 },
+	{ 1100,    1137500, 1125000, 1112500, 1100000, 1087500, 1075000, 1062500,
+	  1050000, 1037500, 1025000, 1012500, 1000000, 987500,  975000 },
+	{ 1000,    1100000, 1087500, 1075000, 1062500, 1050000, 1037500, 1025000,
+	  1012500, 1000000, 987500,  975000,  962500,  950000,  937500 },
+	{ 900,     1062500, 1050000, 1037500, 1025000, 1012500, 1000000, 987500,
+	  975000,  962500,  950000,  937500,  925000,  912500,  900000 },
+	{ 800,     1025000, 1012500, 1000000, 987500,  975000,  962500,  950000,
+	  937500,  925000,  912500,  900000,  900000,  900000,  900000 },
+	{ 700,     987500,  975000,  962500,  950000,  937500,  925000,  912500,
+	  900000,  900000,  900000,  900000,  900000,  900000,  900000 },
+	{ 600,     950000,  937500,  925000,  912500,  900000,  900000,  900000,
+	  900000,  900000,  900000,  900000,  900000,  900000,  900000 },
+	{ 500,     912500,  900000,  900000,  900000,  900000,  900000,  900000,
+	  900000,  900000,  900000,  900000,  900000,  900000,  900000 },
+	{ 400,     900000,  900000,  900000,  900000,  900000,  900000,  900000,
+	  900000,  900000,  900000,  900000,  900000,  900000,  900000 },
+	{ 300,     900000,  900000,  900000,  900000,  900000,  900000,  900000,
+	  900000,  900000,  900000,  900000,  900000,  900000,  900000 },
+	{ 200,     900000,  900000,  900000,  900000,  900000,  900000,  900000,
+	  900000,  900000,  900000,  900000,  900000,  900000,  900000 },
+}, {
+	/* KFC 3 */
+	{ 1500,    1300000, 1300000, 1300000, 1287500, 1287500, 1287500, 1275000,
+	  1262500, 1250000, 1237500, 1225000, 1212500, 1200000, 1187500 },
+	{ 1400,    1275000, 1262500, 1250000, 1237500, 1225000, 1212500, 1200000,
+	  1187500, 1175000, 1162500, 1150000, 1137500, 1125000, 1112500 },
+	{ 1300,    1225000, 1212500, 1200000, 1187500, 1175000, 1162500, 1150000,
+	  1137500, 1125000, 1112500, 1100000, 1087500, 1075000, 1062500 },
+	{ 1200,    1175000, 1162500, 1150000, 1137500, 1125000, 1112500, 1100000,
+	  1087500, 1075000, 1062500, 1050000, 1037500, 1025000, 1012500 },
+	{ 1100,    1137500, 1125000, 1112500, 1100000, 1087500, 1075000, 1062500,
+	  1050000, 1037500, 1025000, 1012500, 1000000, 987500,  975000 },
+	{ 1000,    1100000, 1087500, 1075000, 1062500, 1050000, 1037500, 1025000,
+	  1012500, 1000000, 987500,  975000,  962500,  950000,  937500 },
+	{ 900,     1062500, 1050000, 1037500, 1025000, 1012500, 1000000, 987500,
+	  975000,  962500,  950000,  937500,  925000,  912500,  900000 },
+	{ 800,     1025000, 1012500, 1000000, 987500,  975000,  962500,  950000,
+	  937500,  925000,  912500,  900000,  900000,  900000,  900000 },
+	{ 700,     987500,  975000,  962500,  950000,  937500,  925000,  912500,
+	  900000,  900000,  900000,  900000,  900000,  900000,  900000 },
+	{ 600,     950000,  937500,  925000,  912500,  900000,  900000,  900000,
+	  900000,  900000,  900000,  900000,  900000,  900000,  900000 },
+	{ 500,     912500,  900000,  900000,  900000,  900000,  900000,  900000,
+	  900000,  900000,  900000,  900000,  900000,  900000,  900000 },
+	{ 400,     900000,  900000,  900000,  900000,  900000,  900000,  900000,
+	  900000,  900000,  900000,  900000,  900000,  900000,  900000 },
+	{ 300,     900000,  900000,  900000,  900000,  900000,  900000,  900000,
+	  900000,  900000,  900000,  900000,  900000,  900000,  900000 },
+	{ 200,     900000,  900000,  900000,  900000,  900000,  900000,  900000,
+	  900000,  900000,  900000,  900000,  900000,  900000,  900000 },
+}, {
+	/* KFC bin 2 */
+	{ 1300,    1250000, 1237500, 1225000, 1212500, 1200000, 1187500, 1175000,
+	  1162500, 1150000, 1137500, 1125000, 1112500, 1100000, 1087500 },
+	{ 1200,    1200000, 1187500, 1175000, 1162500, 1150000, 1137500, 1125000,
+	  1112500, 1100000, 1087500, 1075000, 1062500, 1050000, 1037500 },
+	{ 1100,    1162500, 1150000, 1137500, 1125000, 1112500, 1100000, 1087500,
+	  1075000, 1062500, 1050000, 1037500, 1025000, 1012500, 1000000 },
+	{ 1000,    1125000, 1112500, 1100000, 1087500, 1075000, 1062500, 1050000,
+	  1037500, 1025000, 1012500, 1000000, 987500,  975000,  962500 },
+	{ 900,     1087500, 1075000, 1062500, 1050000, 1037500, 1025000, 1012500,
+	  1000000, 987500,  975000,  962500,  950000,  937500,  925000 },
+	{ 800,     1050000, 1037500, 1025000, 1012500, 1000000, 987500,  975000,
+	  962500,  950000,  937500,  925000,  912500,  900000,  900000 },
+	{ 700,     1012500, 1000000, 987500,  975000,  962500,  950000,  937500,
+	  925000,  912500,  900000,  900000,  900000,  900000,  900000 },
+	{ 600,     975000,  962500,  950000,  937500,  925000,  912500,  900000,
+	  900000,  900000,  900000,  900000,  900000,  900000,  900000 },
+	{ 500,     937500,  925000,  912500,  900000,  900000,  900000,  900000,
+	  900000,  900000,  900000,  900000,  900000,  900000,  900000 },
+	{ 400,     925000,  912500,  900000,  900000,  900000,  900000,  900000,
+	  900000,  900000,  900000,  900000,  900000,  900000,  900000 },
+	{ 300,     900000,  900000,  900000,  900000,  900000,  900000,  900000,
+	  900000,  900000,  900000,  900000,  900000,  900000,  900000 },
+	{ 200,     900000,  900000,  900000,  900000,  900000,  900000,  900000,
+	  900000,  900000,  900000,  900000,  900000,  900000,  900000 },
+}
+};
+
+static const struct asv_limit_entry __asv_limits[ASV_GROUPS_NUM] = {
+	{ 13, 55 },
+	{ 21, 65 },
+	{ 25, 69 },
+	{ 30, 72 },
+	{ 36, 74 },
+	{ 43, 76 },
+	{ 51, 78 },
+	{ 65, 80 },
+	{ 81, 82 },
+	{ 98, 84 },
+	{ 119, 87 },
+	{ 135, 89 },
+	{ 150, 92 },
+	{ 999, 999 },
+};
+
+static int exynos5422_asv_get_group(struct exynos_asv *asv)
+{
+	unsigned int pkgid_reg, auxi_reg;
+	int hpm, ids, i;
+
+	regmap_read(asv->chipid_regmap, EXYNOS_CHIPID_REG_PKG_ID, &pkgid_reg);
+	regmap_read(asv->chipid_regmap, EXYNOS_CHIPID_REG_AUX_INFO, &auxi_reg);
+
+	if (asv->use_sg) {
+		u32 sga = (pkgid_reg >> EXYNOS5422_SG_A_OFFSET) &
+			   EXYNOS5422_SG_A_MASK;
+
+		u32 sgb = (pkgid_reg >> EXYNOS5422_SG_B_OFFSET) &
+			   EXYNOS5422_SG_B_MASK;
+
+		if ((pkgid_reg >> EXYNOS5422_SG_BSIGN_OFFSET) &
+		     EXYNOS5422_SG_BSIGN_MASK)
+			return sga + sgb;
+		else
+			return sga - sgb;
+	}
+
+	hpm = (auxi_reg >> EXYNOS5422_TMCB_OFFSET) & EXYNOS5422_TMCB_MASK;
+	ids = (pkgid_reg >> EXYNOS5422_IDS_OFFSET) & EXYNOS5422_IDS_MASK;
+
+	for (i = 0; i < ASV_GROUPS_NUM; i++) {
+		if (ids <= __asv_limits[i].ids)
+			break;
+		if (hpm <= __asv_limits[i].hpm)
+			break;
+	}
+	if (i < ASV_GROUPS_NUM)
+		return i;
+
+	return 0;
+}
+
+static int __asv_offset_voltage(unsigned int index)
+{
+	switch (index) {
+	case 1:
+		return 12500;
+	case 2:
+		return 50000;
+	case 3:
+		return 25000;
+	default:
+		return 0;
+	};
+}
+
+static void exynos5422_asv_offset_voltage_setup(struct exynos_asv *asv)
+{
+	struct exynos_asv_subsys *subsys;
+	unsigned int reg, value;
+
+	regmap_read(asv->chipid_regmap, EXYNOS_CHIPID_REG_AUX_INFO, &reg);
+
+	/* ARM offset voltage setup */
+	subsys = &asv->subsys[EXYNOS_ASV_SUBSYS_ID_ARM];
+
+	subsys->base_volt = 1000000;
+
+	value = (reg >> EXYNOS5422_ARM_UP_OFFSET) & EXYNOS5422_ARM_UP_MASK;
+	subsys->offset_volt_h = __asv_offset_voltage(value);
+
+	value = (reg >> EXYNOS5422_ARM_DN_OFFSET) & EXYNOS5422_ARM_DN_MASK;
+	subsys->offset_volt_l = __asv_offset_voltage(value);
+
+	/* KFC offset voltage setup */
+	subsys = &asv->subsys[EXYNOS_ASV_SUBSYS_ID_KFC];
+
+	subsys->base_volt = 1000000;
+
+	value = (reg >> EXYNOS5422_KFC_UP_OFFSET) & EXYNOS5422_KFC_UP_MASK;
+	subsys->offset_volt_h = __asv_offset_voltage(value);
+
+	value = (reg >> EXYNOS5422_KFC_DN_OFFSET) & EXYNOS5422_KFC_DN_MASK;
+	subsys->offset_volt_l = __asv_offset_voltage(value);
+}
+
+static int exynos5422_asv_opp_get_voltage(const struct exynos_asv_subsys *subsys,
+					  int level, unsigned int volt)
+{
+	unsigned int asv_volt;
+
+	if (level >= subsys->table.num_rows)
+		return volt;
+
+	asv_volt = exynos_asv_opp_get_voltage(subsys, level,
+					      subsys->asv->group);
+
+	if (volt > subsys->base_volt)
+		asv_volt += subsys->offset_volt_h;
+	else
+		asv_volt += subsys->offset_volt_l;
+
+	return asv_volt;
+}
+
+static unsigned int exynos5422_asv_parse_table(unsigned int pkg_id)
+{
+	return (pkg_id >> EXYNOS5422_TABLE_OFFSET) & EXYNOS5422_TABLE_MASK;
+}
+
+static bool exynos5422_asv_parse_bin2(unsigned int pkg_id)
+{
+	return (pkg_id >> EXYNOS5422_BIN2_OFFSET) & EXYNOS5422_BIN2_MASK;
+}
+
+static bool exynos5422_asv_parse_sg(unsigned int pkg_id)
+{
+	return (pkg_id >> EXYNOS5422_USESG_OFFSET) & EXYNOS5422_USESG_MASK;
+}
+
+int exynos5422_asv_init(struct exynos_asv *asv)
+{
+	struct exynos_asv_subsys *subsys;
+	unsigned int table_index;
+	unsigned int pkg_id;
+	bool bin2;
+
+	regmap_read(asv->chipid_regmap, EXYNOS_CHIPID_REG_PKG_ID, &pkg_id);
+
+	if (asv->of_bin == 2) {
+		bin2 = true;
+		asv->use_sg = false;
+	} else {
+		asv->use_sg = exynos5422_asv_parse_sg(pkg_id);
+		bin2 = exynos5422_asv_parse_bin2(pkg_id);
+	}
+
+	asv->group = exynos5422_asv_get_group(asv);
+	asv->table = exynos5422_asv_parse_table(pkg_id);
+
+	exynos5422_asv_offset_voltage_setup(asv);
+
+	if (bin2) {
+		table_index = 3;
+	} else {
+		if (asv->table == 2 || asv->table == 3)
+			table_index = asv->table - 1;
+		else
+			table_index = 0;
+	}
+
+	subsys = &asv->subsys[EXYNOS_ASV_SUBSYS_ID_ARM];
+	subsys->cpu_dt_compat = "arm,cortex-a15";
+	if (bin2)
+		subsys->table.num_rows = ASV_ARM_BIN2_DVFS_NUM;
+	else
+		subsys->table.num_rows = ASV_ARM_DVFS_NUM;
+	subsys->table.num_cols = ASV_GROUPS_NUM + 1;
+	subsys->table.buf = (u32 *)asv_arm_table[table_index];
+
+	subsys = &asv->subsys[EXYNOS_ASV_SUBSYS_ID_KFC];
+	subsys->cpu_dt_compat = "arm,cortex-a7";
+	if (bin2)
+		subsys->table.num_rows = ASV_KFC_BIN2_DVFS_NUM;
+	else
+		subsys->table.num_rows = ASV_KFC_DVFS_NUM;
+	subsys->table.num_cols = ASV_GROUPS_NUM + 1;
+	subsys->table.buf = (u32 *)asv_kfc_table[table_index];
+
+	asv->opp_get_voltage = exynos5422_asv_opp_get_voltage;
+
+	return 0;
+}
diff --git a/drivers/soc/samsung/exynos5422-asv.h b/drivers/soc/samsung/exynos5422-asv.h
new file mode 100644
index 000000000000..95a5fb1a7508
--- /dev/null
+++ b/drivers/soc/samsung/exynos5422-asv.h
@@ -0,0 +1,31 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2019 Samsung Electronics Co., Ltd.
+ *	      http://www.samsung.com/
+ *
+ * Samsung Exynos 5422 SoC Adaptive Supply Voltage support
+ */
+
+#ifndef __LINUX_SOC_EXYNOS5422_ASV_H
+#define __LINUX_SOC_EXYNOS5422_ASV_H
+
+#include <linux/errno.h>
+
+enum {
+	EXYNOS_ASV_SUBSYS_ID_ARM,
+	EXYNOS_ASV_SUBSYS_ID_KFC,
+	EXYNOS_ASV_SUBSYS_ID_MAX
+};
+
+struct exynos_asv;
+
+#ifdef CONFIG_EXYNOS_ASV_ARM
+int exynos5422_asv_init(struct exynos_asv *asv);
+#else
+static inline int exynos5422_asv_init(struct exynos_asv *asv)
+{
+	return -ENOTSUPP;
+}
+#endif
+
+#endif /* __LINUX_SOC_EXYNOS5422_ASV_H */
diff --git a/drivers/soc/tegra/Kconfig b/drivers/soc/tegra/Kconfig
index c8ef05d6b8c7..84bd615c4a92 100644
--- a/drivers/soc/tegra/Kconfig
+++ b/drivers/soc/tegra/Kconfig
@@ -15,6 +15,7 @@ config ARCH_TEGRA_2x_SOC
 	select PL310_ERRATA_769419 if CACHE_L2X0
 	select SOC_TEGRA_FLOWCTRL
 	select SOC_TEGRA_PMC
+	select SOC_TEGRA20_VOLTAGE_COUPLER
 	select TEGRA_TIMER
 	help
 	  Support for NVIDIA Tegra AP20 and T20 processors, based on the
@@ -28,6 +29,7 @@ config ARCH_TEGRA_3x_SOC
 	select PL310_ERRATA_769419 if CACHE_L2X0
 	select SOC_TEGRA_FLOWCTRL
 	select SOC_TEGRA_PMC
+	select SOC_TEGRA30_VOLTAGE_COUPLER
 	select TEGRA_TIMER
 	help
 	  Support for NVIDIA Tegra T30 processor family, based on the
@@ -135,3 +137,11 @@ config SOC_TEGRA_POWERGATE_BPMP
 	def_bool y
 	depends on PM_GENERIC_DOMAINS
 	depends on TEGRA_BPMP
+
+config SOC_TEGRA20_VOLTAGE_COUPLER
+	bool "Voltage scaling support for Tegra20 SoCs"
+	depends on ARCH_TEGRA_2x_SOC || COMPILE_TEST
+
+config SOC_TEGRA30_VOLTAGE_COUPLER
+	bool "Voltage scaling support for Tegra30 SoCs"
+	depends on ARCH_TEGRA_3x_SOC || COMPILE_TEST
diff --git a/drivers/soc/tegra/Makefile b/drivers/soc/tegra/Makefile
index 902759fe5f4d..9c809c1814bd 100644
--- a/drivers/soc/tegra/Makefile
+++ b/drivers/soc/tegra/Makefile
@@ -5,3 +5,5 @@ obj-y += common.o
 obj-$(CONFIG_SOC_TEGRA_FLOWCTRL) += flowctrl.o
 obj-$(CONFIG_SOC_TEGRA_PMC) += pmc.o
 obj-$(CONFIG_SOC_TEGRA_POWERGATE_BPMP) += powergate-bpmp.o
+obj-$(CONFIG_SOC_TEGRA20_VOLTAGE_COUPLER) += regulators-tegra20.o
+obj-$(CONFIG_SOC_TEGRA30_VOLTAGE_COUPLER) += regulators-tegra30.o
diff --git a/drivers/soc/tegra/flowctrl.c b/drivers/soc/tegra/flowctrl.c
index b6bdeef33db1..eb96a3086d6d 100644
--- a/drivers/soc/tegra/flowctrl.c
+++ b/drivers/soc/tegra/flowctrl.c
@@ -91,8 +91,23 @@ void flowctrl_cpu_suspend_enter(unsigned int cpuid)
 		reg &= ~TEGRA30_FLOW_CTRL_CSR_WFE_BITMAP;
 		/* clear wfi bitmap */
 		reg &= ~TEGRA30_FLOW_CTRL_CSR_WFI_BITMAP;
-		/* pwr gating on wfi */
-		reg |= TEGRA30_FLOW_CTRL_CSR_WFI_CPU0 << cpuid;
+
+		if (tegra_get_chip_id() == TEGRA30) {
+			/*
+			 * The wfi doesn't work well on Tegra30 because
+			 * CPU hangs under some odd circumstances after
+			 * power-gating (like memory running off PLLP),
+			 * hence use wfe that is working perfectly fine.
+			 * Note that Tegra30 TRM doc clearly stands that
+			 * wfi should be used for the "Cluster Switching",
+			 * while wfe for the power-gating, just like it
+			 * is done on Tegra20.
+			 */
+			reg |= TEGRA20_FLOW_CTRL_CSR_WFE_CPU0 << cpuid;
+		} else {
+			/* pwr gating on wfi */
+			reg |= TEGRA30_FLOW_CTRL_CSR_WFI_CPU0 << cpuid;
+		}
 		break;
 	}
 	reg |= FLOW_CTRL_CSR_INTR_FLAG;			/* clear intr flag */
diff --git a/drivers/soc/tegra/fuse/fuse-tegra.c b/drivers/soc/tegra/fuse/fuse-tegra.c
index 3eb44e65b326..4d719d4b8d5a 100644
--- a/drivers/soc/tegra/fuse/fuse-tegra.c
+++ b/drivers/soc/tegra/fuse/fuse-tegra.c
@@ -8,6 +8,8 @@
 #include <linux/kobject.h>
 #include <linux/init.h>
 #include <linux/io.h>
+#include <linux/nvmem-consumer.h>
+#include <linux/nvmem-provider.h>
 #include <linux/of.h>
 #include <linux/of_address.h>
 #include <linux/platform_device.h>
@@ -31,50 +33,6 @@ static const char *tegra_revision_name[TEGRA_REVISION_MAX] = {
 	[TEGRA_REVISION_A04]     = "A04",
 };
 
-static u8 fuse_readb(struct tegra_fuse *fuse, unsigned int offset)
-{
-	u32 val;
-
-	val = fuse->read(fuse, round_down(offset, 4));
-	val >>= (offset % 4) * 8;
-	val &= 0xff;
-
-	return val;
-}
-
-static ssize_t fuse_read(struct file *fd, struct kobject *kobj,
-			 struct bin_attribute *attr, char *buf,
-			 loff_t pos, size_t size)
-{
-	struct device *dev = kobj_to_dev(kobj);
-	struct tegra_fuse *fuse = dev_get_drvdata(dev);
-	int i;
-
-	if (pos < 0 || pos >= attr->size)
-		return 0;
-
-	if (size > attr->size - pos)
-		size = attr->size - pos;
-
-	for (i = 0; i < size; i++)
-		buf[i] = fuse_readb(fuse, pos + i);
-
-	return i;
-}
-
-static struct bin_attribute fuse_bin_attr = {
-	.attr = { .name = "fuse", .mode = S_IRUGO, },
-	.read = fuse_read,
-};
-
-static int tegra_fuse_create_sysfs(struct device *dev, unsigned int size,
-				   const struct tegra_fuse_info *info)
-{
-	fuse_bin_attr.size = size;
-
-	return device_create_bin_file(dev, &fuse_bin_attr);
-}
-
 static const struct of_device_id car_match[] __initconst = {
 	{ .compatible = "nvidia,tegra20-car", },
 	{ .compatible = "nvidia,tegra30-car", },
@@ -115,9 +73,111 @@ static const struct of_device_id tegra_fuse_match[] = {
 	{ /* sentinel */ }
 };
 
+static int tegra_fuse_read(void *priv, unsigned int offset, void *value,
+			   size_t bytes)
+{
+	unsigned int count = bytes / 4, i;
+	struct tegra_fuse *fuse = priv;
+	u32 *buffer = value;
+
+	for (i = 0; i < count; i++)
+		buffer[i] = fuse->read(fuse, offset + i * 4);
+
+	return 0;
+}
+
+static const struct nvmem_cell_info tegra_fuse_cells[] = {
+	{
+		.name = "tsensor-cpu1",
+		.offset = 0x084,
+		.bytes = 4,
+		.bit_offset = 0,
+		.nbits = 32,
+	}, {
+		.name = "tsensor-cpu2",
+		.offset = 0x088,
+		.bytes = 4,
+		.bit_offset = 0,
+		.nbits = 32,
+	}, {
+		.name = "tsensor-cpu0",
+		.offset = 0x098,
+		.bytes = 4,
+		.bit_offset = 0,
+		.nbits = 32,
+	}, {
+		.name = "xusb-pad-calibration",
+		.offset = 0x0f0,
+		.bytes = 4,
+		.bit_offset = 0,
+		.nbits = 32,
+	}, {
+		.name = "tsensor-cpu3",
+		.offset = 0x12c,
+		.bytes = 4,
+		.bit_offset = 0,
+		.nbits = 32,
+	}, {
+		.name = "sata-calibration",
+		.offset = 0x124,
+		.bytes = 1,
+		.bit_offset = 0,
+		.nbits = 2,
+	}, {
+		.name = "tsensor-gpu",
+		.offset = 0x154,
+		.bytes = 4,
+		.bit_offset = 0,
+		.nbits = 32,
+	}, {
+		.name = "tsensor-mem0",
+		.offset = 0x158,
+		.bytes = 4,
+		.bit_offset = 0,
+		.nbits = 32,
+	}, {
+		.name = "tsensor-mem1",
+		.offset = 0x15c,
+		.bytes = 4,
+		.bit_offset = 0,
+		.nbits = 32,
+	}, {
+		.name = "tsensor-pllx",
+		.offset = 0x160,
+		.bytes = 4,
+		.bit_offset = 0,
+		.nbits = 32,
+	}, {
+		.name = "tsensor-common",
+		.offset = 0x180,
+		.bytes = 4,
+		.bit_offset = 0,
+		.nbits = 32,
+	}, {
+		.name = "tsensor-realignment",
+		.offset = 0x1fc,
+		.bytes = 4,
+		.bit_offset = 0,
+		.nbits = 32,
+	}, {
+		.name = "gpu-calibration",
+		.offset = 0x204,
+		.bytes = 4,
+		.bit_offset = 0,
+		.nbits = 32,
+	}, {
+		.name = "xusb-pad-calibration-ext",
+		.offset = 0x250,
+		.bytes = 4,
+		.bit_offset = 0,
+		.nbits = 32,
+	},
+};
+
 static int tegra_fuse_probe(struct platform_device *pdev)
 {
 	void __iomem *base = fuse->base;
+	struct nvmem_config nvmem;
 	struct resource *res;
 	int err;
 
@@ -146,20 +206,42 @@ static int tegra_fuse_probe(struct platform_device *pdev)
 
 	if (fuse->soc->probe) {
 		err = fuse->soc->probe(fuse);
-		if (err < 0) {
-			fuse->base = base;
-			return err;
-		}
+		if (err < 0)
+			goto restore;
 	}
 
-	if (tegra_fuse_create_sysfs(&pdev->dev, fuse->soc->info->size,
-				    fuse->soc->info))
-		return -ENODEV;
+	memset(&nvmem, 0, sizeof(nvmem));
+	nvmem.dev = &pdev->dev;
+	nvmem.name = "fuse";
+	nvmem.id = -1;
+	nvmem.owner = THIS_MODULE;
+	nvmem.cells = tegra_fuse_cells;
+	nvmem.ncells = ARRAY_SIZE(tegra_fuse_cells);
+	nvmem.type = NVMEM_TYPE_OTP;
+	nvmem.read_only = true;
+	nvmem.root_only = true;
+	nvmem.reg_read = tegra_fuse_read;
+	nvmem.size = fuse->soc->info->size;
+	nvmem.word_size = 4;
+	nvmem.stride = 4;
+	nvmem.priv = fuse;
+
+	fuse->nvmem = devm_nvmem_register(&pdev->dev, &nvmem);
+	if (IS_ERR(fuse->nvmem)) {
+		err = PTR_ERR(fuse->nvmem);
+		dev_err(&pdev->dev, "failed to register NVMEM device: %d\n",
+			err);
+		goto restore;
+	}
 
 	/* release the early I/O memory mapping */
 	iounmap(base);
 
 	return 0;
+
+restore:
+	fuse->base = base;
+	return err;
 }
 
 static struct platform_driver tegra_fuse_driver = {
@@ -186,9 +268,12 @@ u32 __init tegra_fuse_read_early(unsigned int offset)
 
 int tegra_fuse_readl(unsigned long offset, u32 *value)
 {
-	if (!fuse->read)
+	if (!fuse->read || !fuse->clk)
 		return -EPROBE_DEFER;
 
+	if (IS_ERR(fuse->clk))
+		return PTR_ERR(fuse->clk);
+
 	*value = fuse->read(fuse, offset);
 
 	return 0;
@@ -338,6 +423,15 @@ static int __init tegra_init_fuse(void)
 	pr_debug("Tegra CPU Speedo ID %d, SoC Speedo ID %d\n",
 		 tegra_sku_info.cpu_speedo_id, tegra_sku_info.soc_speedo_id);
 
+	if (fuse->soc->lookups) {
+		size_t size = sizeof(*fuse->lookups) * fuse->soc->num_lookups;
+
+		fuse->lookups = kmemdup(fuse->soc->lookups, size, GFP_KERNEL);
+		if (!fuse->lookups)
+			return -ENOMEM;
+
+		nvmem_add_cell_lookups(fuse->lookups, fuse->soc->num_lookups);
+	}
 
 	return 0;
 }
diff --git a/drivers/soc/tegra/fuse/fuse-tegra30.c b/drivers/soc/tegra/fuse/fuse-tegra30.c
index be9424a87173..b8daaf5b7291 100644
--- a/drivers/soc/tegra/fuse/fuse-tegra30.c
+++ b/drivers/soc/tegra/fuse/fuse-tegra30.c
@@ -8,6 +8,7 @@
 #include <linux/err.h>
 #include <linux/io.h>
 #include <linux/kernel.h>
+#include <linux/nvmem-consumer.h>
 #include <linux/of_device.h>
 #include <linux/of_address.h>
 #include <linux/platform_device.h>
@@ -127,6 +128,70 @@ const struct tegra_fuse_soc tegra114_fuse_soc = {
 #endif
 
 #if defined(CONFIG_ARCH_TEGRA_124_SOC) || defined(CONFIG_ARCH_TEGRA_132_SOC)
+static const struct nvmem_cell_lookup tegra124_fuse_lookups[] = {
+	{
+		.nvmem_name = "fuse",
+		.cell_name = "xusb-pad-calibration",
+		.dev_id = "7009f000.padctl",
+		.con_id = "calibration",
+	}, {
+		.nvmem_name = "fuse",
+		.cell_name = "sata-calibration",
+		.dev_id = "70020000.sata",
+		.con_id = "calibration",
+	}, {
+		.nvmem_name = "fuse",
+		.cell_name = "tsensor-common",
+		.dev_id = "700e2000.thermal-sensor",
+		.con_id = "common",
+	}, {
+		.nvmem_name = "fuse",
+		.cell_name = "tsensor-realignment",
+		.dev_id = "700e2000.thermal-sensor",
+		.con_id = "realignment",
+	}, {
+		.nvmem_name = "fuse",
+		.cell_name = "tsensor-cpu0",
+		.dev_id = "700e2000.thermal-sensor",
+		.con_id = "cpu0",
+	}, {
+		.nvmem_name = "fuse",
+		.cell_name = "tsensor-cpu1",
+		.dev_id = "700e2000.thermal-sensor",
+		.con_id = "cpu1",
+	}, {
+		.nvmem_name = "fuse",
+		.cell_name = "tsensor-cpu2",
+		.dev_id = "700e2000.thermal-sensor",
+		.con_id = "cpu2",
+	}, {
+		.nvmem_name = "fuse",
+		.cell_name = "tsensor-cpu3",
+		.dev_id = "700e2000.thermal-sensor",
+		.con_id = "cpu3",
+	}, {
+		.nvmem_name = "fuse",
+		.cell_name = "tsensor-mem0",
+		.dev_id = "700e2000.thermal-sensor",
+		.con_id = "mem0",
+	}, {
+		.nvmem_name = "fuse",
+		.cell_name = "tsensor-mem1",
+		.dev_id = "700e2000.thermal-sensor",
+		.con_id = "mem1",
+	}, {
+		.nvmem_name = "fuse",
+		.cell_name = "tsensor-gpu",
+		.dev_id = "700e2000.thermal-sensor",
+		.con_id = "gpu",
+	}, {
+		.nvmem_name = "fuse",
+		.cell_name = "tsensor-pllx",
+		.dev_id = "700e2000.thermal-sensor",
+		.con_id = "pllx",
+	},
+};
+
 static const struct tegra_fuse_info tegra124_fuse_info = {
 	.read = tegra30_fuse_read,
 	.size = 0x300,
@@ -137,10 +202,81 @@ const struct tegra_fuse_soc tegra124_fuse_soc = {
 	.init = tegra30_fuse_init,
 	.speedo_init = tegra124_init_speedo_data,
 	.info = &tegra124_fuse_info,
+	.lookups = tegra124_fuse_lookups,
+	.num_lookups = ARRAY_SIZE(tegra124_fuse_lookups),
 };
 #endif
 
 #if defined(CONFIG_ARCH_TEGRA_210_SOC)
+static const struct nvmem_cell_lookup tegra210_fuse_lookups[] = {
+	{
+		.nvmem_name = "fuse",
+		.cell_name = "tsensor-cpu1",
+		.dev_id = "700e2000.thermal-sensor",
+		.con_id = "cpu1",
+	}, {
+		.nvmem_name = "fuse",
+		.cell_name = "tsensor-cpu2",
+		.dev_id = "700e2000.thermal-sensor",
+		.con_id = "cpu2",
+	}, {
+		.nvmem_name = "fuse",
+		.cell_name = "tsensor-cpu0",
+		.dev_id = "700e2000.thermal-sensor",
+		.con_id = "cpu0",
+	}, {
+		.nvmem_name = "fuse",
+		.cell_name = "xusb-pad-calibration",
+		.dev_id = "7009f000.padctl",
+		.con_id = "calibration",
+	}, {
+		.nvmem_name = "fuse",
+		.cell_name = "tsensor-cpu3",
+		.dev_id = "700e2000.thermal-sensor",
+		.con_id = "cpu3",
+	}, {
+		.nvmem_name = "fuse",
+		.cell_name = "sata-calibration",
+		.dev_id = "70020000.sata",
+		.con_id = "calibration",
+	}, {
+		.nvmem_name = "fuse",
+		.cell_name = "tsensor-gpu",
+		.dev_id = "700e2000.thermal-sensor",
+		.con_id = "gpu",
+	}, {
+		.nvmem_name = "fuse",
+		.cell_name = "tsensor-mem0",
+		.dev_id = "700e2000.thermal-sensor",
+		.con_id = "mem0",
+	}, {
+		.nvmem_name = "fuse",
+		.cell_name = "tsensor-mem1",
+		.dev_id = "700e2000.thermal-sensor",
+		.con_id = "mem1",
+	}, {
+		.nvmem_name = "fuse",
+		.cell_name = "tsensor-pllx",
+		.dev_id = "700e2000.thermal-sensor",
+		.con_id = "pllx",
+	}, {
+		.nvmem_name = "fuse",
+		.cell_name = "tsensor-common",
+		.dev_id = "700e2000.thermal-sensor",
+		.con_id = "common",
+	}, {
+		.nvmem_name = "fuse",
+		.cell_name = "gpu-calibration",
+		.dev_id = "57000000.gpu",
+		.con_id = "calibration",
+	}, {
+		.nvmem_name = "fuse",
+		.cell_name = "xusb-pad-calibration-ext",
+		.dev_id = "7009f000.padctl",
+		.con_id = "calibration-ext",
+	},
+};
+
 static const struct tegra_fuse_info tegra210_fuse_info = {
 	.read = tegra30_fuse_read,
 	.size = 0x300,
@@ -151,10 +287,26 @@ const struct tegra_fuse_soc tegra210_fuse_soc = {
 	.init = tegra30_fuse_init,
 	.speedo_init = tegra210_init_speedo_data,
 	.info = &tegra210_fuse_info,
+	.lookups = tegra210_fuse_lookups,
+	.num_lookups = ARRAY_SIZE(tegra210_fuse_lookups),
 };
 #endif
 
 #if defined(CONFIG_ARCH_TEGRA_186_SOC)
+static const struct nvmem_cell_lookup tegra186_fuse_lookups[] = {
+	{
+		.nvmem_name = "fuse",
+		.cell_name = "xusb-pad-calibration",
+		.dev_id = "3520000.padctl",
+		.con_id = "calibration",
+	}, {
+		.nvmem_name = "fuse",
+		.cell_name = "xusb-pad-calibration-ext",
+		.dev_id = "3520000.padctl",
+		.con_id = "calibration-ext",
+	},
+};
+
 static const struct tegra_fuse_info tegra186_fuse_info = {
 	.read = tegra30_fuse_read,
 	.size = 0x300,
@@ -164,5 +316,7 @@ static const struct tegra_fuse_info tegra186_fuse_info = {
 const struct tegra_fuse_soc tegra186_fuse_soc = {
 	.init = tegra30_fuse_init,
 	.info = &tegra186_fuse_info,
+	.lookups = tegra186_fuse_lookups,
+	.num_lookups = ARRAY_SIZE(tegra186_fuse_lookups),
 };
 #endif
diff --git a/drivers/soc/tegra/fuse/fuse.h b/drivers/soc/tegra/fuse/fuse.h
index 7230cb330503..0f74c2c34af0 100644
--- a/drivers/soc/tegra/fuse/fuse.h
+++ b/drivers/soc/tegra/fuse/fuse.h
@@ -13,6 +13,8 @@
 #include <linux/dmaengine.h>
 #include <linux/types.h>
 
+struct nvmem_cell_lookup;
+struct nvmem_device;
 struct tegra_fuse;
 
 struct tegra_fuse_info {
@@ -27,6 +29,9 @@ struct tegra_fuse_soc {
 	int (*probe)(struct tegra_fuse *fuse);
 
 	const struct tegra_fuse_info *info;
+
+	const struct nvmem_cell_lookup *lookups;
+	unsigned int num_lookups;
 };
 
 struct tegra_fuse {
@@ -48,6 +53,9 @@ struct tegra_fuse {
 		dma_addr_t phys;
 		u32 *virt;
 	} apbdma;
+
+	struct nvmem_device *nvmem;
+	struct nvmem_cell_lookup *lookups;
 };
 
 void tegra_init_revision(void);
diff --git a/drivers/soc/tegra/pmc.c b/drivers/soc/tegra/pmc.c
index 9f9c1c677cf4..8db63cfba833 100644
--- a/drivers/soc/tegra/pmc.c
+++ b/drivers/soc/tegra/pmc.c
@@ -56,8 +56,14 @@
 #define  PMC_CNTRL_SIDE_EFFECT_LP0	BIT(14) /* LP0 when CPU pwr gated */
 #define  PMC_CNTRL_SYSCLK_OE		BIT(11) /* system clock enable */
 #define  PMC_CNTRL_SYSCLK_POLARITY	BIT(10) /* sys clk polarity */
+#define  PMC_CNTRL_PWRREQ_POLARITY	BIT(8)
 #define  PMC_CNTRL_MAIN_RST		BIT(4)
 
+#define PMC_WAKE_MASK			0x0c
+#define PMC_WAKE_LEVEL			0x10
+#define PMC_WAKE_STATUS			0x14
+#define PMC_SW_WAKE_STATUS		0x18
+
 #define DPD_SAMPLE			0x020
 #define  DPD_SAMPLE_ENABLE		BIT(0)
 #define  DPD_SAMPLE_DISABLE		(0 << 0)
@@ -82,11 +88,18 @@
 
 #define PMC_CPUPWRGOOD_TIMER		0xc8
 #define PMC_CPUPWROFF_TIMER		0xcc
+#define PMC_COREPWRGOOD_TIMER		0x3c
+#define PMC_COREPWROFF_TIMER		0xe0
 
 #define PMC_PWR_DET_VALUE		0xe4
 
 #define PMC_SCRATCH41			0x140
 
+#define PMC_WAKE2_MASK			0x160
+#define PMC_WAKE2_LEVEL			0x164
+#define PMC_WAKE2_STATUS		0x168
+#define PMC_SW_WAKE2_STATUS		0x16c
+
 #define PMC_SENSOR_CTRL			0x1b0
 #define  PMC_SENSOR_CTRL_SCRATCH_WRITE	BIT(2)
 #define  PMC_SENSOR_CTRL_ENABLE_RST	BIT(1)
@@ -226,6 +239,8 @@ struct tegra_pmc_soc {
 	void (*setup_irq_polarity)(struct tegra_pmc *pmc,
 				   struct device_node *np,
 				   bool invert);
+	int (*irq_set_wake)(struct irq_data *data, unsigned int on);
+	int (*irq_set_type)(struct irq_data *data, unsigned int type);
 
 	const char * const *reset_sources;
 	unsigned int num_reset_sources;
@@ -309,6 +324,7 @@ static const char * const tegra210_reset_sources[] = {
  * @pctl_dev: pin controller exposed by the PMC
  * @domain: IRQ domain provided by the PMC
  * @irq: chip implementation for the IRQ domain
+ * @clk_nb: pclk clock changes handler
  */
 struct tegra_pmc {
 	struct device *dev;
@@ -344,6 +360,8 @@ struct tegra_pmc {
 
 	struct irq_domain *domain;
 	struct irq_chip irq;
+
+	struct notifier_block clk_nb;
 };
 
 static struct tegra_pmc *pmc = &(struct tegra_pmc) {
@@ -1192,7 +1210,7 @@ static int tegra_io_pad_prepare(struct tegra_pmc *pmc, enum tegra_io_pad id,
 		return err;
 
 	if (pmc->clk) {
-		rate = clk_get_rate(pmc->clk);
+		rate = pmc->rate;
 		if (!rate) {
 			dev_err(pmc->dev, "failed to get clock rate\n");
 			return -ENODEV;
@@ -1433,6 +1451,7 @@ void tegra_pmc_set_suspend_mode(enum tegra_suspend_mode mode)
 void tegra_pmc_enter_suspend_mode(enum tegra_suspend_mode mode)
 {
 	unsigned long long rate = 0;
+	u64 ticks;
 	u32 value;
 
 	switch (mode) {
@@ -1441,7 +1460,7 @@ void tegra_pmc_enter_suspend_mode(enum tegra_suspend_mode mode)
 		break;
 
 	case TEGRA_SUSPEND_LP2:
-		rate = clk_get_rate(pmc->clk);
+		rate = pmc->rate;
 		break;
 
 	default:
@@ -1451,21 +1470,13 @@ void tegra_pmc_enter_suspend_mode(enum tegra_suspend_mode mode)
 	if (WARN_ON_ONCE(rate == 0))
 		rate = 100000000;
 
-	if (rate != pmc->rate) {
-		u64 ticks;
-
-		ticks = pmc->cpu_good_time * rate + USEC_PER_SEC - 1;
-		do_div(ticks, USEC_PER_SEC);
-		tegra_pmc_writel(pmc, ticks, PMC_CPUPWRGOOD_TIMER);
+	ticks = pmc->cpu_good_time * rate + USEC_PER_SEC - 1;
+	do_div(ticks, USEC_PER_SEC);
+	tegra_pmc_writel(pmc, ticks, PMC_CPUPWRGOOD_TIMER);
 
-		ticks = pmc->cpu_off_time * rate + USEC_PER_SEC - 1;
-		do_div(ticks, USEC_PER_SEC);
-		tegra_pmc_writel(pmc, ticks, PMC_CPUPWROFF_TIMER);
-
-		wmb();
-
-		pmc->rate = rate;
-	}
+	ticks = pmc->cpu_off_time * rate + USEC_PER_SEC - 1;
+	do_div(ticks, USEC_PER_SEC);
+	tegra_pmc_writel(pmc, ticks, PMC_CPUPWROFF_TIMER);
 
 	value = tegra_pmc_readl(pmc, PMC_CNTRL);
 	value &= ~PMC_CNTRL_SIDE_EFFECT_LP0;
@@ -1899,6 +1910,20 @@ static int tegra_pmc_irq_alloc(struct irq_domain *domain, unsigned int virq,
 							    event->id,
 							    &pmc->irq, pmc);
 
+			/*
+			 * GPIOs don't have an equivalent interrupt in the
+			 * parent controller (GIC). However some code, such
+			 * as the one in irq_get_irqchip_state(), require a
+			 * valid IRQ chip to be set. Make sure that's the
+			 * case by passing NULL here, which will install a
+			 * dummy IRQ chip for the interrupt in the parent
+			 * domain.
+			 */
+			if (domain->parent)
+				irq_domain_set_hwirq_and_chip(domain->parent,
+							      virq, 0, NULL,
+							      NULL);
+
 			break;
 		}
 	}
@@ -1908,10 +1933,22 @@ static int tegra_pmc_irq_alloc(struct irq_domain *domain, unsigned int virq,
 	 * dummy hardware IRQ number. This is used in the ->irq_set_type()
 	 * and ->irq_set_wake() callbacks to return early for these IRQs.
 	 */
-	if (i == soc->num_wake_events)
+	if (i == soc->num_wake_events) {
 		err = irq_domain_set_hwirq_and_chip(domain, virq, ULONG_MAX,
 						    &pmc->irq, pmc);
 
+		/*
+		 * Interrupts without a wake event don't have a corresponding
+		 * interrupt in the parent controller (GIC). Pass NULL for the
+		 * chip here, which causes a dummy IRQ chip to be installed
+		 * for the interrupt in the parent domain, to make this
+		 * explicit.
+		 */
+		if (domain->parent)
+			irq_domain_set_hwirq_and_chip(domain->parent, virq, 0,
+						      NULL, NULL);
+	}
+
 	return err;
 }
 
@@ -1920,7 +1957,87 @@ static const struct irq_domain_ops tegra_pmc_irq_domain_ops = {
 	.alloc = tegra_pmc_irq_alloc,
 };
 
-static int tegra_pmc_irq_set_wake(struct irq_data *data, unsigned int on)
+static int tegra210_pmc_irq_set_wake(struct irq_data *data, unsigned int on)
+{
+	struct tegra_pmc *pmc = irq_data_get_irq_chip_data(data);
+	unsigned int offset, bit;
+	u32 value;
+
+	if (data->hwirq == ULONG_MAX)
+		return 0;
+
+	offset = data->hwirq / 32;
+	bit = data->hwirq % 32;
+
+	/* clear wake status */
+	tegra_pmc_writel(pmc, 0, PMC_SW_WAKE_STATUS);
+	tegra_pmc_writel(pmc, 0, PMC_SW_WAKE2_STATUS);
+
+	tegra_pmc_writel(pmc, 0, PMC_WAKE_STATUS);
+	tegra_pmc_writel(pmc, 0, PMC_WAKE2_STATUS);
+
+	/* enable PMC wake */
+	if (data->hwirq >= 32)
+		offset = PMC_WAKE2_MASK;
+	else
+		offset = PMC_WAKE_MASK;
+
+	value = tegra_pmc_readl(pmc, offset);
+
+	if (on)
+		value |= BIT(bit);
+	else
+		value &= ~BIT(bit);
+
+	tegra_pmc_writel(pmc, value, offset);
+
+	return 0;
+}
+
+static int tegra210_pmc_irq_set_type(struct irq_data *data, unsigned int type)
+{
+	struct tegra_pmc *pmc = irq_data_get_irq_chip_data(data);
+	unsigned int offset, bit;
+	u32 value;
+
+	if (data->hwirq == ULONG_MAX)
+		return 0;
+
+	offset = data->hwirq / 32;
+	bit = data->hwirq % 32;
+
+	if (data->hwirq >= 32)
+		offset = PMC_WAKE2_LEVEL;
+	else
+		offset = PMC_WAKE_LEVEL;
+
+	value = tegra_pmc_readl(pmc, offset);
+
+	switch (type) {
+	case IRQ_TYPE_EDGE_RISING:
+	case IRQ_TYPE_LEVEL_HIGH:
+		value |= BIT(bit);
+		break;
+
+	case IRQ_TYPE_EDGE_FALLING:
+	case IRQ_TYPE_LEVEL_LOW:
+		value &= ~BIT(bit);
+		break;
+
+	case IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING:
+		value ^= BIT(bit);
+		break;
+
+	default:
+		return -EINVAL;
+	}
+
+	tegra_pmc_writel(pmc, value, offset);
+
+	return 0;
+}
+
+static int tegra186_pmc_irq_set_wake(struct irq_data *data, unsigned int on)
 {
 	struct tegra_pmc *pmc = irq_data_get_irq_chip_data(data);
 	unsigned int offset, bit;
@@ -1952,7 +2069,7 @@ static int tegra_pmc_irq_set_wake(struct irq_data *data, unsigned int on)
 	return 0;
 }
 
-static int tegra_pmc_irq_set_type(struct irq_data *data, unsigned int type)
+static int tegra186_pmc_irq_set_type(struct irq_data *data, unsigned int type)
 {
 	struct tegra_pmc *pmc = irq_data_get_irq_chip_data(data);
 	u32 value;
@@ -2006,8 +2123,8 @@ static int tegra_pmc_irq_init(struct tegra_pmc *pmc)
 	pmc->irq.irq_unmask = irq_chip_unmask_parent;
 	pmc->irq.irq_eoi = irq_chip_eoi_parent;
 	pmc->irq.irq_set_affinity = irq_chip_set_affinity_parent;
-	pmc->irq.irq_set_type = tegra_pmc_irq_set_type;
-	pmc->irq.irq_set_wake = tegra_pmc_irq_set_wake;
+	pmc->irq.irq_set_type = pmc->soc->irq_set_type;
+	pmc->irq.irq_set_wake = pmc->soc->irq_set_wake;
 
 	pmc->domain = irq_domain_add_hierarchy(parent, 0, 96, pmc->dev->of_node,
 					       &tegra_pmc_irq_domain_ops, pmc);
@@ -2019,6 +2136,33 @@ static int tegra_pmc_irq_init(struct tegra_pmc *pmc)
 	return 0;
 }
 
+static int tegra_pmc_clk_notify_cb(struct notifier_block *nb,
+				   unsigned long action, void *ptr)
+{
+	struct tegra_pmc *pmc = container_of(nb, struct tegra_pmc, clk_nb);
+	struct clk_notifier_data *data = ptr;
+
+	switch (action) {
+	case PRE_RATE_CHANGE:
+		mutex_lock(&pmc->powergates_lock);
+		break;
+
+	case POST_RATE_CHANGE:
+		pmc->rate = data->new_rate;
+		/* fall through */
+
+	case ABORT_RATE_CHANGE:
+		mutex_unlock(&pmc->powergates_lock);
+		break;
+
+	default:
+		WARN_ON_ONCE(1);
+		return notifier_from_errno(-EINVAL);
+	}
+
+	return NOTIFY_OK;
+}
+
 static int tegra_pmc_probe(struct platform_device *pdev)
 {
 	void __iomem *base;
@@ -2082,6 +2226,23 @@ static int tegra_pmc_probe(struct platform_device *pdev)
 		pmc->clk = NULL;
 	}
 
+	/*
+	 * PCLK clock rate can't be retrieved using CLK API because it
+	 * causes lockup if CPU enters LP2 idle state from some other
+	 * CLK notifier, hence we're caching the rate's value locally.
+	 */
+	if (pmc->clk) {
+		pmc->clk_nb.notifier_call = tegra_pmc_clk_notify_cb;
+		err = clk_notifier_register(pmc->clk, &pmc->clk_nb);
+		if (err) {
+			dev_err(&pdev->dev,
+				"failed to register clk notifier\n");
+			return err;
+		}
+
+		pmc->rate = clk_get_rate(pmc->clk);
+	}
+
 	pmc->dev = &pdev->dev;
 
 	tegra_pmc_init(pmc);
@@ -2133,6 +2294,8 @@ cleanup_debugfs:
 cleanup_sysfs:
 	device_remove_file(&pdev->dev, &dev_attr_reset_reason);
 	device_remove_file(&pdev->dev, &dev_attr_reset_level);
+	clk_notifier_unregister(pmc->clk, &pmc->clk_nb);
+
 	return err;
 }
 
@@ -2184,7 +2347,7 @@ static const struct tegra_pmc_regs tegra20_pmc_regs = {
 
 static void tegra20_pmc_init(struct tegra_pmc *pmc)
 {
-	u32 value;
+	u32 value, osc, pmu, off;
 
 	/* Always enable CPU power request */
 	value = tegra_pmc_readl(pmc, PMC_CNTRL);
@@ -2198,6 +2361,11 @@ static void tegra20_pmc_init(struct tegra_pmc *pmc)
 	else
 		value |= PMC_CNTRL_SYSCLK_POLARITY;
 
+	if (pmc->corereq_high)
+		value &= ~PMC_CNTRL_PWRREQ_POLARITY;
+	else
+		value |= PMC_CNTRL_PWRREQ_POLARITY;
+
 	/* configure the output polarity while the request is tristated */
 	tegra_pmc_writel(pmc, value, PMC_CNTRL);
 
@@ -2205,6 +2373,16 @@ static void tegra20_pmc_init(struct tegra_pmc *pmc)
 	value = tegra_pmc_readl(pmc, PMC_CNTRL);
 	value |= PMC_CNTRL_SYSCLK_OE;
 	tegra_pmc_writel(pmc, value, PMC_CNTRL);
+
+	/* program core timings which are applicable only for suspend state */
+	if (pmc->suspend_mode != TEGRA_SUSPEND_NONE) {
+		osc = DIV_ROUND_UP(pmc->core_osc_time * 8192, 1000000);
+		pmu = DIV_ROUND_UP(pmc->core_pmu_time * 32768, 1000000);
+		off = DIV_ROUND_UP(pmc->core_off_time * 32768, 1000000);
+		tegra_pmc_writel(pmc, ((osc << 8) & 0xff00) | (pmu & 0xff),
+				 PMC_COREPWRGOOD_TIMER);
+		tegra_pmc_writel(pmc, off, PMC_COREPWROFF_TIMER);
+	}
 }
 
 static void tegra20_pmc_setup_irq_polarity(struct tegra_pmc *pmc,
@@ -2538,6 +2716,10 @@ static const struct pinctrl_pin_desc tegra210_pin_descs[] = {
 	TEGRA210_IO_PAD_TABLE(TEGRA_IO_PIN_DESC)
 };
 
+static const struct tegra_wake_event tegra210_wake_events[] = {
+	TEGRA_WAKE_IRQ("rtc", 16, 2),
+};
+
 static const struct tegra_pmc_soc tegra210_pmc_soc = {
 	.num_powergates = ARRAY_SIZE(tegra210_powergates),
 	.powergates = tegra210_powergates,
@@ -2555,10 +2737,14 @@ static const struct tegra_pmc_soc tegra210_pmc_soc = {
 	.regs = &tegra20_pmc_regs,
 	.init = tegra20_pmc_init,
 	.setup_irq_polarity = tegra20_pmc_setup_irq_polarity,
+	.irq_set_wake = tegra210_pmc_irq_set_wake,
+	.irq_set_type = tegra210_pmc_irq_set_type,
 	.reset_sources = tegra210_reset_sources,
 	.num_reset_sources = ARRAY_SIZE(tegra210_reset_sources),
 	.reset_levels = NULL,
 	.num_reset_levels = 0,
+	.num_wake_events = ARRAY_SIZE(tegra210_wake_events),
+	.wake_events = tegra210_wake_events,
 };
 
 #define TEGRA186_IO_PAD_TABLE(_pad)					     \
@@ -2680,6 +2866,8 @@ static const struct tegra_pmc_soc tegra186_pmc_soc = {
 	.regs = &tegra186_pmc_regs,
 	.init = NULL,
 	.setup_irq_polarity = tegra186_pmc_setup_irq_polarity,
+	.irq_set_wake = tegra186_pmc_irq_set_wake,
+	.irq_set_type = tegra186_pmc_irq_set_type,
 	.reset_sources = tegra186_reset_sources,
 	.num_reset_sources = ARRAY_SIZE(tegra186_reset_sources),
 	.reset_levels = tegra186_reset_levels,
diff --git a/drivers/soc/tegra/regulators-tegra20.c b/drivers/soc/tegra/regulators-tegra20.c
new file mode 100644
index 000000000000..ea0eede48802
--- /dev/null
+++ b/drivers/soc/tegra/regulators-tegra20.c
@@ -0,0 +1,365 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Voltage regulators coupler for NVIDIA Tegra20
+ * Copyright (C) 2019 GRATE-DRIVER project
+ *
+ * Voltage constraints borrowed from downstream kernel sources
+ * Copyright (C) 2010-2011 NVIDIA Corporation
+ */
+
+#define pr_fmt(fmt)	"tegra voltage-coupler: " fmt
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/of.h>
+#include <linux/regulator/coupler.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/machine.h>
+
+struct tegra_regulator_coupler {
+	struct regulator_coupler coupler;
+	struct regulator_dev *core_rdev;
+	struct regulator_dev *cpu_rdev;
+	struct regulator_dev *rtc_rdev;
+	int core_min_uV;
+};
+
+static inline struct tegra_regulator_coupler *
+to_tegra_coupler(struct regulator_coupler *coupler)
+{
+	return container_of(coupler, struct tegra_regulator_coupler, coupler);
+}
+
+static int tegra20_core_limit(struct tegra_regulator_coupler *tegra,
+			      struct regulator_dev *core_rdev)
+{
+	int core_min_uV = 0;
+	int core_max_uV;
+	int core_cur_uV;
+	int err;
+
+	if (tegra->core_min_uV > 0)
+		return tegra->core_min_uV;
+
+	core_cur_uV = regulator_get_voltage_rdev(core_rdev);
+	if (core_cur_uV < 0)
+		return core_cur_uV;
+
+	core_max_uV = max(core_cur_uV, 1200000);
+
+	err = regulator_check_voltage(core_rdev, &core_min_uV, &core_max_uV);
+	if (err)
+		return err;
+
+	/*
+	 * Limit minimum CORE voltage to a value left from bootloader or,
+	 * if it's unreasonably low value, to the most common 1.2v or to
+	 * whatever maximum value defined via board's device-tree.
+	 */
+	tegra->core_min_uV = core_max_uV;
+
+	pr_info("core minimum voltage limited to %duV\n", tegra->core_min_uV);
+
+	return tegra->core_min_uV;
+}
+
+static int tegra20_core_rtc_max_spread(struct regulator_dev *core_rdev,
+				       struct regulator_dev *rtc_rdev)
+{
+	struct coupling_desc *c_desc = &core_rdev->coupling_desc;
+	struct regulator_dev *rdev;
+	int max_spread;
+	unsigned int i;
+
+	for (i = 1; i < c_desc->n_coupled; i++) {
+		max_spread = core_rdev->constraints->max_spread[i - 1];
+		rdev = c_desc->coupled_rdevs[i];
+
+		if (rdev == rtc_rdev && max_spread)
+			return max_spread;
+	}
+
+	pr_err_once("rtc-core max-spread is undefined in device-tree\n");
+
+	return 150000;
+}
+
+static int tegra20_core_rtc_update(struct tegra_regulator_coupler *tegra,
+				   struct regulator_dev *core_rdev,
+				   struct regulator_dev *rtc_rdev,
+				   int cpu_uV, int cpu_min_uV)
+{
+	int core_min_uV, core_max_uV = INT_MAX;
+	int rtc_min_uV, rtc_max_uV = INT_MAX;
+	int core_target_uV;
+	int rtc_target_uV;
+	int max_spread;
+	int core_uV;
+	int rtc_uV;
+	int err;
+
+	/*
+	 * RTC and CORE voltages should be no more than 170mV from each other,
+	 * CPU should be below RTC and CORE by at least 120mV. This applies
+	 * to all Tegra20 SoC's.
+	 */
+	max_spread = tegra20_core_rtc_max_spread(core_rdev, rtc_rdev);
+
+	/*
+	 * The core voltage scaling is currently not hooked up in drivers,
+	 * hence we will limit the minimum core voltage to a reasonable value.
+	 * This should be good enough for the time being.
+	 */
+	core_min_uV = tegra20_core_limit(tegra, core_rdev);
+	if (core_min_uV < 0)
+		return core_min_uV;
+
+	err = regulator_check_voltage(core_rdev, &core_min_uV, &core_max_uV);
+	if (err)
+		return err;
+
+	err = regulator_check_consumers(core_rdev, &core_min_uV, &core_max_uV,
+					PM_SUSPEND_ON);
+	if (err)
+		return err;
+
+	core_uV = regulator_get_voltage_rdev(core_rdev);
+	if (core_uV < 0)
+		return core_uV;
+
+	core_min_uV = max(cpu_min_uV + 125000, core_min_uV);
+	if (core_min_uV > core_max_uV)
+		return -EINVAL;
+
+	if (cpu_uV + 120000 > core_uV)
+		pr_err("core-cpu voltage constraint violated: %d %d\n",
+		       core_uV, cpu_uV + 120000);
+
+	rtc_uV = regulator_get_voltage_rdev(rtc_rdev);
+	if (rtc_uV < 0)
+		return rtc_uV;
+
+	if (cpu_uV + 120000 > rtc_uV)
+		pr_err("rtc-cpu voltage constraint violated: %d %d\n",
+		       rtc_uV, cpu_uV + 120000);
+
+	if (abs(core_uV - rtc_uV) > 170000)
+		pr_err("core-rtc voltage constraint violated: %d %d\n",
+		       core_uV, rtc_uV);
+
+	rtc_min_uV = max(cpu_min_uV + 125000, core_min_uV - max_spread);
+
+	err = regulator_check_voltage(rtc_rdev, &rtc_min_uV, &rtc_max_uV);
+	if (err)
+		return err;
+
+	while (core_uV != core_min_uV || rtc_uV != rtc_min_uV) {
+		if (core_uV < core_min_uV) {
+			core_target_uV = min(core_uV + max_spread, core_min_uV);
+			core_target_uV = min(rtc_uV + max_spread, core_target_uV);
+		} else {
+			core_target_uV = max(core_uV - max_spread, core_min_uV);
+			core_target_uV = max(rtc_uV - max_spread, core_target_uV);
+		}
+
+		err = regulator_set_voltage_rdev(core_rdev,
+						 core_target_uV,
+						 core_max_uV,
+						 PM_SUSPEND_ON);
+		if (err)
+			return err;
+
+		core_uV = core_target_uV;
+
+		if (rtc_uV < rtc_min_uV) {
+			rtc_target_uV = min(rtc_uV + max_spread, rtc_min_uV);
+			rtc_target_uV = min(core_uV + max_spread, rtc_target_uV);
+		} else {
+			rtc_target_uV = max(rtc_uV - max_spread, rtc_min_uV);
+			rtc_target_uV = max(core_uV - max_spread, rtc_target_uV);
+		}
+
+		err = regulator_set_voltage_rdev(rtc_rdev,
+						 rtc_target_uV,
+						 rtc_max_uV,
+						 PM_SUSPEND_ON);
+		if (err)
+			return err;
+
+		rtc_uV = rtc_target_uV;
+	}
+
+	return 0;
+}
+
+static int tegra20_core_voltage_update(struct tegra_regulator_coupler *tegra,
+				       struct regulator_dev *cpu_rdev,
+				       struct regulator_dev *core_rdev,
+				       struct regulator_dev *rtc_rdev)
+{
+	int cpu_uV;
+
+	cpu_uV = regulator_get_voltage_rdev(cpu_rdev);
+	if (cpu_uV < 0)
+		return cpu_uV;
+
+	return tegra20_core_rtc_update(tegra, core_rdev, rtc_rdev,
+				       cpu_uV, cpu_uV);
+}
+
+static int tegra20_cpu_voltage_update(struct tegra_regulator_coupler *tegra,
+				      struct regulator_dev *cpu_rdev,
+				      struct regulator_dev *core_rdev,
+				      struct regulator_dev *rtc_rdev)
+{
+	int cpu_min_uV_consumers = 0;
+	int cpu_max_uV = INT_MAX;
+	int cpu_min_uV = 0;
+	int cpu_uV;
+	int err;
+
+	err = regulator_check_voltage(cpu_rdev, &cpu_min_uV, &cpu_max_uV);
+	if (err)
+		return err;
+
+	err = regulator_check_consumers(cpu_rdev, &cpu_min_uV, &cpu_max_uV,
+					PM_SUSPEND_ON);
+	if (err)
+		return err;
+
+	err = regulator_check_consumers(cpu_rdev, &cpu_min_uV_consumers,
+					&cpu_max_uV, PM_SUSPEND_ON);
+	if (err)
+		return err;
+
+	cpu_uV = regulator_get_voltage_rdev(cpu_rdev);
+	if (cpu_uV < 0)
+		return cpu_uV;
+
+	/*
+	 * CPU's regulator may not have any consumers, hence the voltage
+	 * must not be changed in that case because CPU simply won't
+	 * survive the voltage drop if it's running on a higher frequency.
+	 */
+	if (!cpu_min_uV_consumers)
+		cpu_min_uV = cpu_uV;
+
+	if (cpu_min_uV > cpu_uV) {
+		err = tegra20_core_rtc_update(tegra, core_rdev, rtc_rdev,
+					      cpu_uV, cpu_min_uV);
+		if (err)
+			return err;
+
+		err = regulator_set_voltage_rdev(cpu_rdev, cpu_min_uV,
+						 cpu_max_uV, PM_SUSPEND_ON);
+		if (err)
+			return err;
+	} else if (cpu_min_uV < cpu_uV)  {
+		err = regulator_set_voltage_rdev(cpu_rdev, cpu_min_uV,
+						 cpu_max_uV, PM_SUSPEND_ON);
+		if (err)
+			return err;
+
+		err = tegra20_core_rtc_update(tegra, core_rdev, rtc_rdev,
+					      cpu_uV, cpu_min_uV);
+		if (err)
+			return err;
+	}
+
+	return 0;
+}
+
+static int tegra20_regulator_balance_voltage(struct regulator_coupler *coupler,
+					     struct regulator_dev *rdev,
+					     suspend_state_t state)
+{
+	struct tegra_regulator_coupler *tegra = to_tegra_coupler(coupler);
+	struct regulator_dev *core_rdev = tegra->core_rdev;
+	struct regulator_dev *cpu_rdev = tegra->cpu_rdev;
+	struct regulator_dev *rtc_rdev = tegra->rtc_rdev;
+
+	if ((core_rdev != rdev && cpu_rdev != rdev && rtc_rdev != rdev) ||
+	    state != PM_SUSPEND_ON) {
+		pr_err("regulators are not coupled properly\n");
+		return -EINVAL;
+	}
+
+	if (rdev == cpu_rdev)
+		return tegra20_cpu_voltage_update(tegra, cpu_rdev,
+						  core_rdev, rtc_rdev);
+
+	if (rdev == core_rdev)
+		return tegra20_core_voltage_update(tegra, cpu_rdev,
+						   core_rdev, rtc_rdev);
+
+	pr_err("changing %s voltage not permitted\n", rdev_get_name(rtc_rdev));
+
+	return -EPERM;
+}
+
+static int tegra20_regulator_attach(struct regulator_coupler *coupler,
+				    struct regulator_dev *rdev)
+{
+	struct tegra_regulator_coupler *tegra = to_tegra_coupler(coupler);
+	struct device_node *np = rdev->dev.of_node;
+
+	if (of_property_read_bool(np, "nvidia,tegra-core-regulator") &&
+	    !tegra->core_rdev) {
+		tegra->core_rdev = rdev;
+		return 0;
+	}
+
+	if (of_property_read_bool(np, "nvidia,tegra-rtc-regulator") &&
+	    !tegra->rtc_rdev) {
+		tegra->rtc_rdev = rdev;
+		return 0;
+	}
+
+	if (of_property_read_bool(np, "nvidia,tegra-cpu-regulator") &&
+	    !tegra->cpu_rdev) {
+		tegra->cpu_rdev = rdev;
+		return 0;
+	}
+
+	return -EINVAL;
+}
+
+static int tegra20_regulator_detach(struct regulator_coupler *coupler,
+				    struct regulator_dev *rdev)
+{
+	struct tegra_regulator_coupler *tegra = to_tegra_coupler(coupler);
+
+	if (tegra->core_rdev == rdev) {
+		tegra->core_rdev = NULL;
+		return 0;
+	}
+
+	if (tegra->rtc_rdev == rdev) {
+		tegra->rtc_rdev = NULL;
+		return 0;
+	}
+
+	if (tegra->cpu_rdev == rdev) {
+		tegra->cpu_rdev = NULL;
+		return 0;
+	}
+
+	return -EINVAL;
+}
+
+static struct tegra_regulator_coupler tegra20_coupler = {
+	.coupler = {
+		.attach_regulator = tegra20_regulator_attach,
+		.detach_regulator = tegra20_regulator_detach,
+		.balance_voltage = tegra20_regulator_balance_voltage,
+	},
+};
+
+static int __init tegra_regulator_coupler_init(void)
+{
+	if (!of_machine_is_compatible("nvidia,tegra20"))
+		return 0;
+
+	return regulator_coupler_register(&tegra20_coupler.coupler);
+}
+arch_initcall(tegra_regulator_coupler_init);
diff --git a/drivers/soc/tegra/regulators-tegra30.c b/drivers/soc/tegra/regulators-tegra30.c
new file mode 100644
index 000000000000..8e623ff18e70
--- /dev/null
+++ b/drivers/soc/tegra/regulators-tegra30.c
@@ -0,0 +1,317 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Voltage regulators coupler for NVIDIA Tegra30
+ * Copyright (C) 2019 GRATE-DRIVER project
+ *
+ * Voltage constraints borrowed from downstream kernel sources
+ * Copyright (C) 2010-2011 NVIDIA Corporation
+ */
+
+#define pr_fmt(fmt)	"tegra voltage-coupler: " fmt
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/of.h>
+#include <linux/regulator/coupler.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/machine.h>
+
+#include <soc/tegra/fuse.h>
+
+struct tegra_regulator_coupler {
+	struct regulator_coupler coupler;
+	struct regulator_dev *core_rdev;
+	struct regulator_dev *cpu_rdev;
+	int core_min_uV;
+};
+
+static inline struct tegra_regulator_coupler *
+to_tegra_coupler(struct regulator_coupler *coupler)
+{
+	return container_of(coupler, struct tegra_regulator_coupler, coupler);
+}
+
+static int tegra30_core_limit(struct tegra_regulator_coupler *tegra,
+			      struct regulator_dev *core_rdev)
+{
+	int core_min_uV = 0;
+	int core_max_uV;
+	int core_cur_uV;
+	int err;
+
+	if (tegra->core_min_uV > 0)
+		return tegra->core_min_uV;
+
+	core_cur_uV = regulator_get_voltage_rdev(core_rdev);
+	if (core_cur_uV < 0)
+		return core_cur_uV;
+
+	core_max_uV = max(core_cur_uV, 1200000);
+
+	err = regulator_check_voltage(core_rdev, &core_min_uV, &core_max_uV);
+	if (err)
+		return err;
+
+	/*
+	 * Limit minimum CORE voltage to a value left from bootloader or,
+	 * if it's unreasonably low value, to the most common 1.2v or to
+	 * whatever maximum value defined via board's device-tree.
+	 */
+	tegra->core_min_uV = core_max_uV;
+
+	pr_info("core minimum voltage limited to %duV\n", tegra->core_min_uV);
+
+	return tegra->core_min_uV;
+}
+
+static int tegra30_core_cpu_limit(int cpu_uV)
+{
+	if (cpu_uV < 800000)
+		return 950000;
+
+	if (cpu_uV < 900000)
+		return 1000000;
+
+	if (cpu_uV < 1000000)
+		return 1100000;
+
+	if (cpu_uV < 1100000)
+		return 1200000;
+
+	if (cpu_uV < 1250000) {
+		switch (tegra_sku_info.cpu_speedo_id) {
+		case 0 ... 1:
+		case 4:
+		case 7 ... 8:
+			return 1200000;
+
+		default:
+			return 1300000;
+		}
+	}
+
+	return -EINVAL;
+}
+
+static int tegra30_voltage_update(struct tegra_regulator_coupler *tegra,
+				  struct regulator_dev *cpu_rdev,
+				  struct regulator_dev *core_rdev)
+{
+	int core_min_uV, core_max_uV = INT_MAX;
+	int cpu_min_uV, cpu_max_uV = INT_MAX;
+	int cpu_min_uV_consumers = 0;
+	int core_min_limited_uV;
+	int core_target_uV;
+	int cpu_target_uV;
+	int core_max_step;
+	int cpu_max_step;
+	int max_spread;
+	int core_uV;
+	int cpu_uV;
+	int err;
+
+	/*
+	 * CPU voltage should not got lower than 300mV from the CORE.
+	 * CPU voltage should stay below the CORE by 100mV+, depending
+	 * by the CORE voltage. This applies to all Tegra30 SoC's.
+	 */
+	max_spread = cpu_rdev->constraints->max_spread[0];
+	cpu_max_step = cpu_rdev->constraints->max_uV_step;
+	core_max_step = core_rdev->constraints->max_uV_step;
+
+	if (!max_spread) {
+		pr_err_once("cpu-core max-spread is undefined in device-tree\n");
+		max_spread = 300000;
+	}
+
+	if (!cpu_max_step) {
+		pr_err_once("cpu max-step is undefined in device-tree\n");
+		cpu_max_step = 150000;
+	}
+
+	if (!core_max_step) {
+		pr_err_once("core max-step is undefined in device-tree\n");
+		core_max_step = 150000;
+	}
+
+	/*
+	 * The CORE voltage scaling is currently not hooked up in drivers,
+	 * hence we will limit the minimum CORE voltage to a reasonable value.
+	 * This should be good enough for the time being.
+	 */
+	core_min_uV = tegra30_core_limit(tegra, core_rdev);
+	if (core_min_uV < 0)
+		return core_min_uV;
+
+	err = regulator_check_consumers(core_rdev, &core_min_uV, &core_max_uV,
+					PM_SUSPEND_ON);
+	if (err)
+		return err;
+
+	core_uV = regulator_get_voltage_rdev(core_rdev);
+	if (core_uV < 0)
+		return core_uV;
+
+	cpu_min_uV = core_min_uV - max_spread;
+
+	err = regulator_check_consumers(cpu_rdev, &cpu_min_uV, &cpu_max_uV,
+					PM_SUSPEND_ON);
+	if (err)
+		return err;
+
+	err = regulator_check_consumers(cpu_rdev, &cpu_min_uV_consumers,
+					&cpu_max_uV, PM_SUSPEND_ON);
+	if (err)
+		return err;
+
+	err = regulator_check_voltage(cpu_rdev, &cpu_min_uV, &cpu_max_uV);
+	if (err)
+		return err;
+
+	cpu_uV = regulator_get_voltage_rdev(cpu_rdev);
+	if (cpu_uV < 0)
+		return cpu_uV;
+
+	/*
+	 * CPU's regulator may not have any consumers, hence the voltage
+	 * must not be changed in that case because CPU simply won't
+	 * survive the voltage drop if it's running on a higher frequency.
+	 */
+	if (!cpu_min_uV_consumers)
+		cpu_min_uV = cpu_uV;
+
+	/*
+	 * Bootloader shall set up voltages correctly, but if it
+	 * happens that there is a violation, then try to fix it
+	 * at first.
+	 */
+	core_min_limited_uV = tegra30_core_cpu_limit(cpu_uV);
+	if (core_min_limited_uV < 0)
+		return core_min_limited_uV;
+
+	core_min_uV = max(core_min_uV, tegra30_core_cpu_limit(cpu_min_uV));
+
+	err = regulator_check_voltage(core_rdev, &core_min_uV, &core_max_uV);
+	if (err)
+		return err;
+
+	if (core_min_limited_uV > core_uV) {
+		pr_err("core voltage constraint violated: %d %d %d\n",
+		       core_uV, core_min_limited_uV, cpu_uV);
+		goto update_core;
+	}
+
+	while (cpu_uV != cpu_min_uV || core_uV != core_min_uV) {
+		if (cpu_uV < cpu_min_uV) {
+			cpu_target_uV = min(cpu_uV + cpu_max_step, cpu_min_uV);
+		} else {
+			cpu_target_uV = max(cpu_uV - cpu_max_step, cpu_min_uV);
+			cpu_target_uV = max(core_uV - max_spread, cpu_target_uV);
+		}
+
+		err = regulator_set_voltage_rdev(cpu_rdev,
+						 cpu_target_uV,
+						 cpu_max_uV,
+						 PM_SUSPEND_ON);
+		if (err)
+			return err;
+
+		cpu_uV = cpu_target_uV;
+update_core:
+		core_min_limited_uV = tegra30_core_cpu_limit(cpu_uV);
+		if (core_min_limited_uV < 0)
+			return core_min_limited_uV;
+
+		core_target_uV = max(core_min_limited_uV, core_min_uV);
+
+		if (core_uV < core_target_uV) {
+			core_target_uV = min(core_target_uV, core_uV + core_max_step);
+			core_target_uV = min(core_target_uV, cpu_uV + max_spread);
+		} else {
+			core_target_uV = max(core_target_uV, core_uV - core_max_step);
+		}
+
+		err = regulator_set_voltage_rdev(core_rdev,
+						 core_target_uV,
+						 core_max_uV,
+						 PM_SUSPEND_ON);
+		if (err)
+			return err;
+
+		core_uV = core_target_uV;
+	}
+
+	return 0;
+}
+
+static int tegra30_regulator_balance_voltage(struct regulator_coupler *coupler,
+					     struct regulator_dev *rdev,
+					     suspend_state_t state)
+{
+	struct tegra_regulator_coupler *tegra = to_tegra_coupler(coupler);
+	struct regulator_dev *core_rdev = tegra->core_rdev;
+	struct regulator_dev *cpu_rdev = tegra->cpu_rdev;
+
+	if ((core_rdev != rdev && cpu_rdev != rdev) || state != PM_SUSPEND_ON) {
+		pr_err("regulators are not coupled properly\n");
+		return -EINVAL;
+	}
+
+	return tegra30_voltage_update(tegra, cpu_rdev, core_rdev);
+}
+
+static int tegra30_regulator_attach(struct regulator_coupler *coupler,
+				    struct regulator_dev *rdev)
+{
+	struct tegra_regulator_coupler *tegra = to_tegra_coupler(coupler);
+	struct device_node *np = rdev->dev.of_node;
+
+	if (of_property_read_bool(np, "nvidia,tegra-core-regulator") &&
+	    !tegra->core_rdev) {
+		tegra->core_rdev = rdev;
+		return 0;
+	}
+
+	if (of_property_read_bool(np, "nvidia,tegra-cpu-regulator") &&
+	    !tegra->cpu_rdev) {
+		tegra->cpu_rdev = rdev;
+		return 0;
+	}
+
+	return -EINVAL;
+}
+
+static int tegra30_regulator_detach(struct regulator_coupler *coupler,
+				    struct regulator_dev *rdev)
+{
+	struct tegra_regulator_coupler *tegra = to_tegra_coupler(coupler);
+
+	if (tegra->core_rdev == rdev) {
+		tegra->core_rdev = NULL;
+		return 0;
+	}
+
+	if (tegra->cpu_rdev == rdev) {
+		tegra->cpu_rdev = NULL;
+		return 0;
+	}
+
+	return -EINVAL;
+}
+
+static struct tegra_regulator_coupler tegra30_coupler = {
+	.coupler = {
+		.attach_regulator = tegra30_regulator_attach,
+		.detach_regulator = tegra30_regulator_detach,
+		.balance_voltage = tegra30_regulator_balance_voltage,
+	},
+};
+
+static int __init tegra_regulator_coupler_init(void)
+{
+	if (!of_machine_is_compatible("nvidia,tegra30"))
+		return 0;
+
+	return regulator_coupler_register(&tegra30_coupler.coupler);
+}
+arch_initcall(tegra_regulator_coupler_init);
diff --git a/drivers/soc/ti/Makefile b/drivers/soc/ti/Makefile
index b3868d392d4f..788b5cd1e180 100644
--- a/drivers/soc/ti/Makefile
+++ b/drivers/soc/ti/Makefile
@@ -6,6 +6,7 @@ obj-$(CONFIG_KEYSTONE_NAVIGATOR_QMSS)	+= knav_qmss.o
 knav_qmss-y := knav_qmss_queue.o knav_qmss_acc.o
 obj-$(CONFIG_KEYSTONE_NAVIGATOR_DMA)	+= knav_dma.o
 obj-$(CONFIG_AMX3_PM)			+= pm33xx.o
+obj-$(CONFIG_ARCH_OMAP2PLUS)		+= omap_prm.o
 obj-$(CONFIG_WKUP_M3_IPC)		+= wkup_m3_ipc.o
 obj-$(CONFIG_TI_SCI_PM_DOMAINS)		+= ti_sci_pm_domains.o
 obj-$(CONFIG_TI_SCI_INTA_MSI_DOMAIN)	+= ti_sci_inta_msi.o
diff --git a/drivers/soc/ti/omap_prm.c b/drivers/soc/ti/omap_prm.c
new file mode 100644
index 000000000000..96c6f777519c
--- /dev/null
+++ b/drivers/soc/ti/omap_prm.c
@@ -0,0 +1,391 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * OMAP2+ PRM driver
+ *
+ * Copyright (C) 2019 Texas Instruments Incorporated - http://www.ti.com/
+ *	Tero Kristo <t-kristo@ti.com>
+ */
+
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/io.h>
+#include <linux/iopoll.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/reset-controller.h>
+#include <linux/delay.h>
+
+#include <linux/platform_data/ti-prm.h>
+
+struct omap_rst_map {
+	s8 rst;
+	s8 st;
+};
+
+struct omap_prm_data {
+	u32 base;
+	const char *name;
+	const char *clkdm_name;
+	u16 rstctrl;
+	u16 rstst;
+	const struct omap_rst_map *rstmap;
+	u8 flags;
+};
+
+struct omap_prm {
+	const struct omap_prm_data *data;
+	void __iomem *base;
+};
+
+struct omap_reset_data {
+	struct reset_controller_dev rcdev;
+	struct omap_prm *prm;
+	u32 mask;
+	spinlock_t lock;
+	struct clockdomain *clkdm;
+	struct device *dev;
+};
+
+#define to_omap_reset_data(p) container_of((p), struct omap_reset_data, rcdev)
+
+#define OMAP_MAX_RESETS		8
+#define OMAP_RESET_MAX_WAIT	10000
+
+#define OMAP_PRM_HAS_RSTCTRL	BIT(0)
+#define OMAP_PRM_HAS_RSTST	BIT(1)
+#define OMAP_PRM_HAS_NO_CLKDM	BIT(2)
+
+#define OMAP_PRM_HAS_RESETS	(OMAP_PRM_HAS_RSTCTRL | OMAP_PRM_HAS_RSTST)
+
+static const struct omap_rst_map rst_map_0[] = {
+	{ .rst = 0, .st = 0 },
+	{ .rst = -1 },
+};
+
+static const struct omap_rst_map rst_map_01[] = {
+	{ .rst = 0, .st = 0 },
+	{ .rst = 1, .st = 1 },
+	{ .rst = -1 },
+};
+
+static const struct omap_rst_map rst_map_012[] = {
+	{ .rst = 0, .st = 0 },
+	{ .rst = 1, .st = 1 },
+	{ .rst = 2, .st = 2 },
+	{ .rst = -1 },
+};
+
+static const struct omap_prm_data omap4_prm_data[] = {
+	{ .name = "tesla", .base = 0x4a306400, .rstctrl = 0x10, .rstst = 0x14, .rstmap = rst_map_01 },
+	{ .name = "core", .base = 0x4a306700, .rstctrl = 0x210, .rstst = 0x214, .clkdm_name = "ducati", .rstmap = rst_map_012 },
+	{ .name = "ivahd", .base = 0x4a306f00, .rstctrl = 0x10, .rstst = 0x14, .rstmap = rst_map_012 },
+	{ .name = "device", .base = 0x4a307b00, .rstctrl = 0x0, .rstst = 0x4, .rstmap = rst_map_01, .flags = OMAP_PRM_HAS_RSTCTRL | OMAP_PRM_HAS_NO_CLKDM },
+	{ },
+};
+
+static const struct omap_prm_data omap5_prm_data[] = {
+	{ .name = "dsp", .base = 0x4ae06400, .rstctrl = 0x10, .rstst = 0x14, .rstmap = rst_map_01 },
+	{ .name = "core", .base = 0x4ae06700, .rstctrl = 0x210, .rstst = 0x214, .clkdm_name = "ipu", .rstmap = rst_map_012 },
+	{ .name = "iva", .base = 0x4ae07200, .rstctrl = 0x10, .rstst = 0x14, .rstmap = rst_map_012 },
+	{ .name = "device", .base = 0x4ae07c00, .rstctrl = 0x0, .rstst = 0x4, .rstmap = rst_map_01, .flags = OMAP_PRM_HAS_RSTCTRL | OMAP_PRM_HAS_NO_CLKDM },
+	{ },
+};
+
+static const struct omap_prm_data dra7_prm_data[] = {
+	{ .name = "dsp1", .base = 0x4ae06400, .rstctrl = 0x10, .rstst = 0x14, .rstmap = rst_map_01 },
+	{ .name = "ipu", .base = 0x4ae06500, .rstctrl = 0x10, .rstst = 0x14, .clkdm_name = "ipu1", .rstmap = rst_map_012 },
+	{ .name = "core", .base = 0x4ae06700, .rstctrl = 0x210, .rstst = 0x214, .clkdm_name = "ipu2", .rstmap = rst_map_012 },
+	{ .name = "iva", .base = 0x4ae06f00, .rstctrl = 0x10, .rstst = 0x14, .rstmap = rst_map_012 },
+	{ .name = "dsp2", .base = 0x4ae07b00, .rstctrl = 0x10, .rstst = 0x14, .rstmap = rst_map_01 },
+	{ .name = "eve1", .base = 0x4ae07b40, .rstctrl = 0x10, .rstst = 0x14, .rstmap = rst_map_01 },
+	{ .name = "eve2", .base = 0x4ae07b80, .rstctrl = 0x10, .rstst = 0x14, .rstmap = rst_map_01 },
+	{ .name = "eve3", .base = 0x4ae07bc0, .rstctrl = 0x10, .rstst = 0x14, .rstmap = rst_map_01 },
+	{ .name = "eve4", .base = 0x4ae07c00, .rstctrl = 0x10, .rstst = 0x14, .rstmap = rst_map_01 },
+	{ },
+};
+
+static const struct omap_rst_map am3_per_rst_map[] = {
+	{ .rst = 1 },
+	{ .rst = -1 },
+};
+
+static const struct omap_rst_map am3_wkup_rst_map[] = {
+	{ .rst = 3, .st = 5 },
+	{ .rst = -1 },
+};
+
+static const struct omap_prm_data am3_prm_data[] = {
+	{ .name = "per", .base = 0x44e00c00, .rstctrl = 0x0, .rstmap = am3_per_rst_map, .flags = OMAP_PRM_HAS_RSTCTRL, .clkdm_name = "pruss_ocp" },
+	{ .name = "wkup", .base = 0x44e00d00, .rstctrl = 0x0, .rstst = 0xc, .rstmap = am3_wkup_rst_map, .flags = OMAP_PRM_HAS_RSTCTRL | OMAP_PRM_HAS_NO_CLKDM },
+	{ .name = "device", .base = 0x44e00f00, .rstctrl = 0x0, .rstst = 0x8, .rstmap = rst_map_01, .flags = OMAP_PRM_HAS_RSTCTRL | OMAP_PRM_HAS_NO_CLKDM },
+	{ .name = "gfx", .base = 0x44e01100, .rstctrl = 0x4, .rstst = 0x14, .rstmap = rst_map_0, .clkdm_name = "gfx_l3" },
+	{ },
+};
+
+static const struct omap_rst_map am4_per_rst_map[] = {
+	{ .rst = 1, .st = 0 },
+	{ .rst = -1 },
+};
+
+static const struct omap_rst_map am4_device_rst_map[] = {
+	{ .rst = 0, .st = 1 },
+	{ .rst = 1, .st = 0 },
+	{ .rst = -1 },
+};
+
+static const struct omap_prm_data am4_prm_data[] = {
+	{ .name = "gfx", .base = 0x44df0400, .rstctrl = 0x10, .rstst = 0x14, .rstmap = rst_map_0, .clkdm_name = "gfx_l3" },
+	{ .name = "per", .base = 0x44df0800, .rstctrl = 0x10, .rstst = 0x14, .rstmap = am4_per_rst_map, .clkdm_name = "pruss_ocp" },
+	{ .name = "wkup", .base = 0x44df2000, .rstctrl = 0x10, .rstst = 0x14, .rstmap = am3_wkup_rst_map, .flags = OMAP_PRM_HAS_NO_CLKDM },
+	{ .name = "device", .base = 0x44df4000, .rstctrl = 0x0, .rstst = 0x4, .rstmap = am4_device_rst_map, .flags = OMAP_PRM_HAS_RSTCTRL | OMAP_PRM_HAS_NO_CLKDM },
+	{ },
+};
+
+static const struct of_device_id omap_prm_id_table[] = {
+	{ .compatible = "ti,omap4-prm-inst", .data = omap4_prm_data },
+	{ .compatible = "ti,omap5-prm-inst", .data = omap5_prm_data },
+	{ .compatible = "ti,dra7-prm-inst", .data = dra7_prm_data },
+	{ .compatible = "ti,am3-prm-inst", .data = am3_prm_data },
+	{ .compatible = "ti,am4-prm-inst", .data = am4_prm_data },
+	{ },
+};
+
+static bool _is_valid_reset(struct omap_reset_data *reset, unsigned long id)
+{
+	if (reset->mask & BIT(id))
+		return true;
+
+	return false;
+}
+
+static int omap_reset_get_st_bit(struct omap_reset_data *reset,
+				 unsigned long id)
+{
+	const struct omap_rst_map *map = reset->prm->data->rstmap;
+
+	while (map->rst >= 0) {
+		if (map->rst == id)
+			return map->st;
+
+		map++;
+	}
+
+	return id;
+}
+
+static int omap_reset_status(struct reset_controller_dev *rcdev,
+			     unsigned long id)
+{
+	struct omap_reset_data *reset = to_omap_reset_data(rcdev);
+	u32 v;
+	int st_bit = omap_reset_get_st_bit(reset, id);
+	bool has_rstst = reset->prm->data->rstst ||
+		(reset->prm->data->flags & OMAP_PRM_HAS_RSTST);
+
+	/* Check if we have rstst */
+	if (!has_rstst)
+		return -ENOTSUPP;
+
+	/* Check if hw reset line is asserted */
+	v = readl_relaxed(reset->prm->base + reset->prm->data->rstctrl);
+	if (v & BIT(id))
+		return 1;
+
+	/*
+	 * Check reset status, high value means reset sequence has been
+	 * completed successfully so we can return 0 here (reset deasserted)
+	 */
+	v = readl_relaxed(reset->prm->base + reset->prm->data->rstst);
+	v >>= st_bit;
+	v &= 1;
+
+	return !v;
+}
+
+static int omap_reset_assert(struct reset_controller_dev *rcdev,
+			     unsigned long id)
+{
+	struct omap_reset_data *reset = to_omap_reset_data(rcdev);
+	u32 v;
+	unsigned long flags;
+
+	/* assert the reset control line */
+	spin_lock_irqsave(&reset->lock, flags);
+	v = readl_relaxed(reset->prm->base + reset->prm->data->rstctrl);
+	v |= 1 << id;
+	writel_relaxed(v, reset->prm->base + reset->prm->data->rstctrl);
+	spin_unlock_irqrestore(&reset->lock, flags);
+
+	return 0;
+}
+
+static int omap_reset_deassert(struct reset_controller_dev *rcdev,
+			       unsigned long id)
+{
+	struct omap_reset_data *reset = to_omap_reset_data(rcdev);
+	u32 v;
+	int st_bit;
+	bool has_rstst;
+	unsigned long flags;
+	struct ti_prm_platform_data *pdata = dev_get_platdata(reset->dev);
+	int ret = 0;
+
+	has_rstst = reset->prm->data->rstst ||
+		(reset->prm->data->flags & OMAP_PRM_HAS_RSTST);
+
+	if (has_rstst) {
+		st_bit = omap_reset_get_st_bit(reset, id);
+
+		/* Clear the reset status by writing 1 to the status bit */
+		v = 1 << st_bit;
+		writel_relaxed(v, reset->prm->base + reset->prm->data->rstst);
+	}
+
+	if (reset->clkdm)
+		pdata->clkdm_deny_idle(reset->clkdm);
+
+	/* de-assert the reset control line */
+	spin_lock_irqsave(&reset->lock, flags);
+	v = readl_relaxed(reset->prm->base + reset->prm->data->rstctrl);
+	v &= ~(1 << id);
+	writel_relaxed(v, reset->prm->base + reset->prm->data->rstctrl);
+	spin_unlock_irqrestore(&reset->lock, flags);
+
+	if (!has_rstst)
+		goto exit;
+
+	/* wait for the status to be set */
+	ret = readl_relaxed_poll_timeout(reset->prm->base +
+					 reset->prm->data->rstst,
+					 v, v & BIT(st_bit), 1,
+					 OMAP_RESET_MAX_WAIT);
+	if (ret)
+		pr_err("%s: timedout waiting for %s:%lu\n", __func__,
+		       reset->prm->data->name, id);
+
+exit:
+	if (reset->clkdm)
+		pdata->clkdm_allow_idle(reset->clkdm);
+
+	return ret;
+}
+
+static const struct reset_control_ops omap_reset_ops = {
+	.assert		= omap_reset_assert,
+	.deassert	= omap_reset_deassert,
+	.status		= omap_reset_status,
+};
+
+static int omap_prm_reset_xlate(struct reset_controller_dev *rcdev,
+				const struct of_phandle_args *reset_spec)
+{
+	struct omap_reset_data *reset = to_omap_reset_data(rcdev);
+
+	if (!_is_valid_reset(reset, reset_spec->args[0]))
+		return -EINVAL;
+
+	return reset_spec->args[0];
+}
+
+static int omap_prm_reset_init(struct platform_device *pdev,
+			       struct omap_prm *prm)
+{
+	struct omap_reset_data *reset;
+	const struct omap_rst_map *map;
+	struct ti_prm_platform_data *pdata = dev_get_platdata(&pdev->dev);
+	char buf[32];
+
+	/*
+	 * Check if we have controllable resets. If either rstctrl is non-zero
+	 * or OMAP_PRM_HAS_RSTCTRL flag is set, we have reset control register
+	 * for the domain.
+	 */
+	if (!prm->data->rstctrl && !(prm->data->flags & OMAP_PRM_HAS_RSTCTRL))
+		return 0;
+
+	/* Check if we have the pdata callbacks in place */
+	if (!pdata || !pdata->clkdm_lookup || !pdata->clkdm_deny_idle ||
+	    !pdata->clkdm_allow_idle)
+		return -EINVAL;
+
+	map = prm->data->rstmap;
+	if (!map)
+		return -EINVAL;
+
+	reset = devm_kzalloc(&pdev->dev, sizeof(*reset), GFP_KERNEL);
+	if (!reset)
+		return -ENOMEM;
+
+	reset->rcdev.owner = THIS_MODULE;
+	reset->rcdev.ops = &omap_reset_ops;
+	reset->rcdev.of_node = pdev->dev.of_node;
+	reset->rcdev.nr_resets = OMAP_MAX_RESETS;
+	reset->rcdev.of_xlate = omap_prm_reset_xlate;
+	reset->rcdev.of_reset_n_cells = 1;
+	reset->dev = &pdev->dev;
+	spin_lock_init(&reset->lock);
+
+	reset->prm = prm;
+
+	sprintf(buf, "%s_clkdm", prm->data->clkdm_name ? prm->data->clkdm_name :
+		prm->data->name);
+
+	if (!(prm->data->flags & OMAP_PRM_HAS_NO_CLKDM)) {
+		reset->clkdm = pdata->clkdm_lookup(buf);
+		if (!reset->clkdm)
+			return -EINVAL;
+	}
+
+	while (map->rst >= 0) {
+		reset->mask |= BIT(map->rst);
+		map++;
+	}
+
+	return devm_reset_controller_register(&pdev->dev, &reset->rcdev);
+}
+
+static int omap_prm_probe(struct platform_device *pdev)
+{
+	struct resource *res;
+	const struct omap_prm_data *data;
+	struct omap_prm *prm;
+	const struct of_device_id *match;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res)
+		return -ENODEV;
+
+	match = of_match_device(omap_prm_id_table, &pdev->dev);
+	if (!match)
+		return -ENOTSUPP;
+
+	prm = devm_kzalloc(&pdev->dev, sizeof(*prm), GFP_KERNEL);
+	if (!prm)
+		return -ENOMEM;
+
+	data = match->data;
+
+	while (data->base != res->start) {
+		if (!data->base)
+			return -EINVAL;
+		data++;
+	}
+
+	prm->data = data;
+
+	prm->base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(prm->base))
+		return PTR_ERR(prm->base);
+
+	return omap_prm_reset_init(pdev, prm);
+}
+
+static struct platform_driver omap_prm_driver = {
+	.probe = omap_prm_probe,
+	.driver = {
+		.name		= KBUILD_MODNAME,
+		.of_match_table	= omap_prm_id_table,
+	},
+};
+builtin_platform_driver(omap_prm_driver);
diff --git a/drivers/soc/xilinx/zynqmp_pm_domains.c b/drivers/soc/xilinx/zynqmp_pm_domains.c
index 600f57cf0c2e..23d90cb12ba9 100644
--- a/drivers/soc/xilinx/zynqmp_pm_domains.c
+++ b/drivers/soc/xilinx/zynqmp_pm_domains.c
@@ -2,7 +2,7 @@
 /*
  * ZynqMP Generic PM domain support
  *
- *  Copyright (C) 2015-2018 Xilinx, Inc.
+ *  Copyright (C) 2015-2019 Xilinx, Inc.
  *
  *  Davorin Mista <davorin.mista@aggios.com>
  *  Jolly Shah <jollys@xilinx.com>
@@ -25,6 +25,8 @@
 
 static const struct zynqmp_eemi_ops *eemi_ops;
 
+static int min_capability;
+
 /**
  * struct zynqmp_pm_domain - Wrapper around struct generic_pm_domain
  * @gpd:		Generic power domain
@@ -106,7 +108,7 @@ static int zynqmp_gpd_power_off(struct generic_pm_domain *domain)
 	int ret;
 	struct pm_domain_data *pdd, *tmp;
 	struct zynqmp_pm_domain *pd;
-	u32 capabilities = 0;
+	u32 capabilities = min_capability;
 	bool may_wakeup;
 
 	if (!eemi_ops->set_requirement)
@@ -283,6 +285,10 @@ static int zynqmp_gpd_probe(struct platform_device *pdev)
 	if (!domains)
 		return -ENOMEM;
 
+	if (!of_device_is_compatible(dev->parent->of_node,
+				     "xlnx,zynqmp-firmware"))
+		min_capability = ZYNQMP_PM_CAPABILITY_UNUSABLE;
+
 	for (i = 0; i < ZYNQMP_NUM_DOMAINS; i++, pd++) {
 		pd->node_id = 0;
 		pd->gpd.name = kasprintf(GFP_KERNEL, "domain%d", i);