Merge branch 'platforms' of git://git.linaro.org/people/rmk/linux-arm

Pull ARM platform updates from Russell King:
 "This covers platform stuff for platforms I have a direct interest in
  (iow, I have the hardware).  Essentially:
   - as we no longer support any other Acorn platforms other than RiscPC
     anymore, we can collect all that code into mach-rpc.
   - convert Acorn expansion card stuff to use IRQ allocation functions,
     and get rid of NO_IRQ from there.
   - cleanups to the ebsa110 platform to move some private stuff out of
     its header files.
   - large amount of SA11x0 updates:
   - conversion of private DMA implementation to DMA engine support
     (this actually gives us greater flexibility in drivers over the old
     API.)
   - re-worked ucb1x00 updates - convert to genirq, remove sa11x0
     dependencies, fix various minor issues
   - move platform specific sa11x0 framebuffer data into platform files
     in arch/arm instead of keeping this in the driver itself
   - update sa11x0 IrDA driver for DMA engine, and allow it to use DMA
     for SIR transmissions as well as FIR
   - rework sa1111 support for genirq, and irq allocation
   - fix sa1111 IRQ support so it works again
   - use sparse IRQ support

  After this, I have one more pull request remaining from my current
  set, which I think is going to be the most problematical as it
  generates 8 conflicts."

Fixed up the trivial conflict in arch/arm/mach-rpc/Makefile as per
Russell.

* 'platforms' of git://git.linaro.org/people/rmk/linux-arm: (125 commits)
  ARM: 7343/1: sa11x0: convert to sparse IRQ
  ARM: 7342/2: sa1100: prepare for sparse irq conversion
  ARM: 7341/1: input: prepare jornada720 keyboard and ts for sa11x0 sparse irq
  ARM: 7340/1: rtc: sa1100: include mach/irqs.h instead of asm/irq.h
  ARM: sa11x0: remove unused DMA controller definitions
  ARM: sa11x0: remove old SoC private DMA driver
  USB: sa1111: add hcd .reset method
  USB: sa1111: add OHCI shutdown methods
  USB: sa1111: reorganize ohci-sa1111.c
  USB: sa1111: get rid of nasty printk(KERN_DEBUG "%s: ...", __FILE__)
  USB: sa1111: sparse and checkpatch cleanups
  ARM: sa11x0: don't static map sa1111
  ARM: sa1111: use dev_err() rather than printk()
  ARM: sa1111: cleanup sub-device registration and unregistration
  ARM: sa1111: only setup DMA for DMA capable devices
  ARM: sa1111: register sa1111 devices with dmabounce in bus notifier
  ARM: sa1111: move USB interface register definitions to ohci-sa1111.c
  ARM: sa1111: move PCMCIA interface register definitions to sa1111_generic.c
  ARM: sa1111: move PS/2 interface register definitions to sa1111p2.c
  ARM: sa1111: delete unused physical GPIO register definitions
  ...

3 files changed, 3 insertions, 7 deletions

diff --git a/drivers/scsi/arm/arxescsi.c b/drivers/scsi/arm/arxescsi.c
index a750aa72b8ef..2a28b4ad1975 100644
--- a/drivers/scsi/arm/arxescsi.c
+++ b/drivers/scsi/arm/arxescsi.c
@@ -305,7 +305,7 @@ arxescsi_probe(struct expansion_card *ec, const struct ecard_id *id)
 	info->base = base;
 
 	info->info.scsi.io_base		= base + 0x2000;
-	info->info.scsi.irq		= NO_IRQ;
+	info->info.scsi.irq		= 0;
 	info->info.scsi.dma		= NO_DMA;
 	info->info.scsi.io_shift	= 5;
 	info->info.ifcfg.clockrate	= 24; /* MHz */
diff --git a/drivers/scsi/arm/fas216.c b/drivers/scsi/arm/fas216.c
index e85c40b6e19b..6206a666a8ec 100644
--- a/drivers/scsi/arm/fas216.c
+++ b/drivers/scsi/arm/fas216.c
@@ -2176,7 +2176,7 @@ static void fas216_done(FAS216_Info *info, unsigned int result)
 	fn = (void (*)(FAS216_Info *, struct scsi_cmnd *, unsigned int))SCpnt->host_scribble;
 	fn(info, SCpnt, result);
 
-	if (info->scsi.irq != NO_IRQ) {
+	if (info->scsi.irq) {
 		spin_lock_irqsave(&info->host_lock, flags);
 		if (info->scsi.phase == PHASE_IDLE)
 			fas216_kick(info);
@@ -2276,7 +2276,7 @@ static int fas216_noqueue_command_lck(struct scsi_cmnd *SCpnt,
 	 * We should only be using this if we don't have an interrupt.
 	 * Provide some "incentive" to use the queueing code.
 	 */
-	BUG_ON(info->scsi.irq != NO_IRQ);
+	BUG_ON(info->scsi.irq);
 
 	info->internal_done = 0;
 	fas216_queue_command_lck(SCpnt, fas216_internal_done);
diff --git a/drivers/scsi/arm/fas216.h b/drivers/scsi/arm/fas216.h
index 84b7127c0121..df2e1b3ddfe2 100644
--- a/drivers/scsi/arm/fas216.h
+++ b/drivers/scsi/arm/fas216.h
@@ -12,10 +12,6 @@
 #ifndef FAS216_H
 #define FAS216_H
 
-#ifndef NO_IRQ
-#define NO_IRQ 255
-#endif
-
 #include <scsi/scsi_eh.h>
 
 #include "queue.h"