diff options
author | ChiYuan Huang <cy_huang@richtek.com> | 2021-07-09 23:40:36 +0800 |
---|---|---|
committer | Mark Brown <broonie@kernel.org> | 2021-07-11 23:50:42 +0100 |
commit | f40f9409719fa092924803723b9445be13fac8fb (patch) | |
tree | 09d2d6fb91e7e36684d4894a0fe269728d70dd0e /drivers/regulator | |
parent | 526e99cf43fe3884014f9e9f2ca5d04d56007287 (diff) |
regulator: rt6752: Add support for Richtek RTQ6752
Add suport for Richtek RTQ6752.
Signed-off-by: ChiYuan Huang <cy_huang@richtek.com>
Link: https://lore.kernel.org/r/1625845236-30285-2-git-send-email-u0084500@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Diffstat (limited to 'drivers/regulator')
-rw-r--r-- | drivers/regulator/Kconfig | 9 | ||||
-rw-r--r-- | drivers/regulator/Makefile | 1 | ||||
-rw-r--r-- | drivers/regulator/rtq6752-regulator.c | 285 |
3 files changed, 295 insertions, 0 deletions
diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig index 24ce9a17ab4f..6562d4c243b0 100644 --- a/drivers/regulator/Kconfig +++ b/drivers/regulator/Kconfig @@ -1066,6 +1066,15 @@ config REGULATOR_RTMV20 the Richtek RTMV20. It can support the load current up to 6A and integrate strobe/vsync/fsin signal to synchronize the IR camera. +config REGULATOR_RTQ6752 + tristate "Richtek RTQ6752 TFT LCD voltage regulator" + depends on I2C + select REGMAP_I2C + help + This driver adds support for Richtek RTQ6752. RTQ6752 includes two + synchronous boost converters for PAVDD, and one synchronous NAVDD + buck-boost. This device is suitable for automotive TFT-LCD panel. + config REGULATOR_S2MPA01 tristate "Samsung S2MPA01 voltage regulator" depends on MFD_SEC_CORE || COMPILE_TEST diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile index 8c2f82206b94..102b2a0069a2 100644 --- a/drivers/regulator/Makefile +++ b/drivers/regulator/Makefile @@ -128,6 +128,7 @@ obj-$(CONFIG_REGULATOR_RT5033) += rt5033-regulator.o obj-$(CONFIG_REGULATOR_RT6160) += rt6160-regulator.o obj-$(CONFIG_REGULATOR_RT6245) += rt6245-regulator.o obj-$(CONFIG_REGULATOR_RTMV20) += rtmv20-regulator.o +obj-$(CONFIG_REGULATOR_RTQ6752) += rtq6752-regulator.o obj-$(CONFIG_REGULATOR_S2MPA01) += s2mpa01.o obj-$(CONFIG_REGULATOR_S2MPS11) += s2mps11.o obj-$(CONFIG_REGULATOR_S5M8767) += s5m8767.o diff --git a/drivers/regulator/rtq6752-regulator.c b/drivers/regulator/rtq6752-regulator.c new file mode 100644 index 000000000000..fe31597983a6 --- /dev/null +++ b/drivers/regulator/rtq6752-regulator.c @@ -0,0 +1,285 @@ +// SPDX-License-Identifier: GPL-2.0+ + +#include <linux/bitops.h> +#include <linux/delay.h> +#include <linux/gpio/consumer.h> +#include <linux/i2c.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/mutex.h> +#include <linux/regmap.h> +#include <linux/regulator/driver.h> + +enum { + RTQ6752_IDX_PAVDD = 0, + RTQ6752_IDX_NAVDD = 1, + RTQ6752_IDX_MAX +}; + +#define RTQ6752_REG_PAVDD 0x00 +#define RTQ6752_REG_NAVDD 0x01 +#define RTQ6752_REG_PAVDDONDLY 0x07 +#define RTQ6752_REG_PAVDDSSTIME 0x07 +#define RTQ6752_REG_NAVDDONDLY 0x0D +#define RTQ6752_REG_NAVDDSSTIME 0x0E +#define RTQ6752_REG_OPTION1 0x12 +#define RTQ6752_REG_CHSWITCH 0x16 +#define RTQ6752_REG_FAULT 0x1D + +#define RTQ6752_VOUT_MASK GENMASK(5, 0) +#define RTQ6752_NAVDDEN_MASK BIT(3) +#define RTQ6752_PAVDDEN_MASK BIT(0) +#define RTQ6752_PAVDDAD_MASK BIT(4) +#define RTQ6752_NAVDDAD_MASK BIT(3) +#define RTQ6752_PAVDDF_MASK BIT(3) +#define RTQ6752_NAVDDF_MASK BIT(0) +#define RTQ6752_ENABLE_MASK (BIT(RTQ6752_IDX_MAX) - 1) + +#define RTQ6752_VOUT_MINUV 5000000 +#define RTQ6752_VOUT_STEPUV 50000 +#define RTQ6752_VOUT_NUM 47 +#define RTQ6752_I2CRDY_TIMEUS 1000 +#define RTQ6752_MINSS_TIMEUS 5000 + +struct rtq6752_priv { + struct regmap *regmap; + struct gpio_desc *enable_gpio; + struct mutex lock; + unsigned char enable_flag; +}; + +static int rtq6752_set_vdd_enable(struct regulator_dev *rdev) +{ + struct rtq6752_priv *priv = rdev_get_drvdata(rdev); + int rid = rdev_get_id(rdev), ret; + + mutex_lock(&priv->lock); + if (!priv->enable_flag && priv->enable_gpio) { + gpiod_set_value(priv->enable_gpio, 1); + + usleep_range(RTQ6752_I2CRDY_TIMEUS, + RTQ6752_I2CRDY_TIMEUS + 100); + + regcache_cache_only(priv->regmap, false); + ret = regcache_sync(priv->regmap); + if (ret) { + mutex_unlock(&priv->lock); + return ret; + } + } + + priv->enable_flag |= BIT(rid); + mutex_unlock(&priv->lock); + + return regulator_enable_regmap(rdev); +} + +static int rtq6752_set_vdd_disable(struct regulator_dev *rdev) +{ + struct rtq6752_priv *priv = rdev_get_drvdata(rdev); + int rid = rdev_get_id(rdev), ret; + + ret = regulator_disable_regmap(rdev); + if (ret) + return ret; + + mutex_lock(&priv->lock); + priv->enable_flag &= ~BIT(rid); + + if (!priv->enable_flag && priv->enable_gpio) { + regcache_cache_only(priv->regmap, true); + regcache_mark_dirty(priv->regmap); + + gpiod_set_value(priv->enable_gpio, 0); + } + mutex_unlock(&priv->lock); + + return 0; +} + +static int rtq6752_get_error_flags(struct regulator_dev *rdev, + unsigned int *flags) +{ + unsigned int val, events = 0; + const unsigned int fault_mask[] = { + RTQ6752_PAVDDF_MASK, RTQ6752_NAVDDF_MASK }; + int rid = rdev_get_id(rdev), ret; + + ret = regmap_read(rdev->regmap, RTQ6752_REG_FAULT, &val); + if (ret) + return ret; + + if (val & fault_mask[rid]) + events = REGULATOR_ERROR_REGULATION_OUT; + + *flags = events; + return 0; +} + +static const struct regulator_ops rtq6752_regulator_ops = { + .list_voltage = regulator_list_voltage_linear, + .set_voltage_sel = regulator_set_voltage_sel_regmap, + .get_voltage_sel = regulator_get_voltage_sel_regmap, + .enable = rtq6752_set_vdd_enable, + .disable = rtq6752_set_vdd_disable, + .is_enabled = regulator_is_enabled_regmap, + .set_active_discharge = regulator_set_active_discharge_regmap, + .get_error_flags = rtq6752_get_error_flags, +}; + +static const struct regulator_desc rtq6752_regulator_descs[] = { + { + .name = "rtq6752-pavdd", + .of_match = of_match_ptr("pavdd"), + .regulators_node = of_match_ptr("regulators"), + .id = RTQ6752_IDX_PAVDD, + .n_voltages = RTQ6752_VOUT_NUM, + .ops = &rtq6752_regulator_ops, + .owner = THIS_MODULE, + .min_uV = RTQ6752_VOUT_MINUV, + .uV_step = RTQ6752_VOUT_STEPUV, + .enable_time = RTQ6752_MINSS_TIMEUS, + .vsel_reg = RTQ6752_REG_PAVDD, + .vsel_mask = RTQ6752_VOUT_MASK, + .enable_reg = RTQ6752_REG_CHSWITCH, + .enable_mask = RTQ6752_PAVDDEN_MASK, + .active_discharge_reg = RTQ6752_REG_OPTION1, + .active_discharge_mask = RTQ6752_PAVDDAD_MASK, + .active_discharge_off = RTQ6752_PAVDDAD_MASK, + }, + { + .name = "rtq6752-navdd", + .of_match = of_match_ptr("navdd"), + .regulators_node = of_match_ptr("regulators"), + .id = RTQ6752_IDX_NAVDD, + .n_voltages = RTQ6752_VOUT_NUM, + .ops = &rtq6752_regulator_ops, + .owner = THIS_MODULE, + .min_uV = RTQ6752_VOUT_MINUV, + .uV_step = RTQ6752_VOUT_STEPUV, + .enable_time = RTQ6752_MINSS_TIMEUS, + .vsel_reg = RTQ6752_REG_NAVDD, + .vsel_mask = RTQ6752_VOUT_MASK, + .enable_reg = RTQ6752_REG_CHSWITCH, + .enable_mask = RTQ6752_NAVDDEN_MASK, + .active_discharge_reg = RTQ6752_REG_OPTION1, + .active_discharge_mask = RTQ6752_NAVDDAD_MASK, + .active_discharge_off = RTQ6752_NAVDDAD_MASK, + } +}; + +static int rtq6752_init_device_properties(struct rtq6752_priv *priv) +{ + u8 raw_vals[] = { 0, 0 }; + int ret; + + /* Configure PAVDD on and softstart delay time to the minimum */ + ret = regmap_raw_write(priv->regmap, RTQ6752_REG_PAVDDONDLY, raw_vals, + ARRAY_SIZE(raw_vals)); + if (ret) + return ret; + + /* Configure NAVDD on and softstart delay time to the minimum */ + return regmap_raw_write(priv->regmap, RTQ6752_REG_NAVDDONDLY, raw_vals, + ARRAY_SIZE(raw_vals)); +} + +static bool rtq6752_is_volatile_reg(struct device *dev, unsigned int reg) +{ + if (reg == RTQ6752_REG_FAULT) + return true; + return false; +} + +static const struct reg_default rtq6752_reg_defaults[] = { + { RTQ6752_REG_PAVDD, 0x14 }, + { RTQ6752_REG_NAVDD, 0x14 }, + { RTQ6752_REG_PAVDDONDLY, 0x01 }, + { RTQ6752_REG_PAVDDSSTIME, 0x01 }, + { RTQ6752_REG_NAVDDONDLY, 0x01 }, + { RTQ6752_REG_NAVDDSSTIME, 0x01 }, + { RTQ6752_REG_OPTION1, 0x07 }, + { RTQ6752_REG_CHSWITCH, 0x29 }, +}; + +static const struct regmap_config rtq6752_regmap_config = { + .reg_bits = 8, + .val_bits = 8, + .cache_type = REGCACHE_RBTREE, + .max_register = RTQ6752_REG_FAULT, + .reg_defaults = rtq6752_reg_defaults, + .num_reg_defaults = ARRAY_SIZE(rtq6752_reg_defaults), + .volatile_reg = rtq6752_is_volatile_reg, +}; + +static int rtq6752_probe(struct i2c_client *i2c) +{ + struct rtq6752_priv *priv; + struct regulator_config reg_cfg = {}; + struct regulator_dev *rdev; + int i, ret; + + priv = devm_kzalloc(&i2c->dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + mutex_init(&priv->lock); + + priv->enable_gpio = devm_gpiod_get_optional(&i2c->dev, "enable", + GPIOD_OUT_HIGH); + if (IS_ERR(priv->enable_gpio)) { + dev_err(&i2c->dev, "Failed to get 'enable' gpio\n"); + return PTR_ERR(priv->enable_gpio); + } + + usleep_range(RTQ6752_I2CRDY_TIMEUS, RTQ6752_I2CRDY_TIMEUS + 100); + /* Default EN pin to high, PAVDD and NAVDD will be on */ + priv->enable_flag = RTQ6752_ENABLE_MASK; + + priv->regmap = devm_regmap_init_i2c(i2c, &rtq6752_regmap_config); + if (IS_ERR(priv->regmap)) { + dev_err(&i2c->dev, "Failed to init regmap\n"); + return PTR_ERR(priv->regmap); + } + + ret = rtq6752_init_device_properties(priv); + if (ret) { + dev_err(&i2c->dev, "Failed to init device properties\n"); + return ret; + } + + reg_cfg.dev = &i2c->dev; + reg_cfg.regmap = priv->regmap; + reg_cfg.driver_data = priv; + + for (i = 0; i < ARRAY_SIZE(rtq6752_regulator_descs); i++) { + rdev = devm_regulator_register(&i2c->dev, + rtq6752_regulator_descs + i, + ®_cfg); + if (IS_ERR(rdev)) { + dev_err(&i2c->dev, "Failed to init %d regulator\n", i); + return PTR_ERR(rdev); + } + } + + return 0; +} + +static const struct of_device_id __maybe_unused rtq6752_device_table[] = { + { .compatible = "richtek,rtq6752", }, + {} +}; +MODULE_DEVICE_TABLE(of, rtq6752_device_table); + +static struct i2c_driver rtq6752_driver = { + .driver = { + .name = "rtq6752", + .of_match_table = rtq6752_device_table, + }, + .probe_new = rtq6752_probe, +}; +module_i2c_driver(rtq6752_driver); + +MODULE_AUTHOR("ChiYuan Hwang <cy_huang@richtek.com>"); +MODULE_DESCRIPTION("Richtek RTQ6752 Regulator Driver"); +MODULE_LICENSE("GPL v2"); |