diff options
| author | Hans de Goede <hdegoede@redhat.com> | 2023-04-15 20:23:40 +0200 |
|---|---|---|
| committer | Sebastian Reichel <sebastian.reichel@collabora.com> | 2023-05-08 15:29:12 +0200 |
| commit | ad3d9c779b1f09f3f3a6fefd07af407c7bc7c9a7 (patch) | |
| tree | a3e1e6fdc54b203f59ca4131c4a5797bc9d3c997 /drivers/power | |
| parent | 59dddea9879713423c7b2ade43c423bb71e0d216 (diff) | |
power: supply: bq25890: Call power_supply_changed() after updating input current or voltage
The bq25892 model relies on external charger-type detection and once
that is done the bq25890_charger code will update the input current
and if pumpexpress is used also the input voltage.
In this case, when the initial power_supply_changed() call is made
from the interrupt handler, the input settings are 5V/0.5A which
on many devices is not enough power to charge (while the device is on).
On many devices the fuel-gauge relies in its external_power_changed
callback to timely signal userspace about charging <-> discharging
status changes. Add a power_supply_changed() call after updating
the input current or voltage. This allows the fuel-gauge driver
to timely recheck if the battery is charging after the new input
settings have been applied and then it can immediately notify
userspace about this.
Fixes: 48f45b094dbb ("power: supply: bq25890: Support higher charging voltages through Pump Express+ protocol")
Fixes: eab25b4f93aa ("power: supply: bq25890: On the bq25892 set the IINLIM based on external charger detection")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Diffstat (limited to 'drivers/power')
| -rw-r--r-- | drivers/power/supply/bq25890_charger.c | 3 |
1 files changed, 3 insertions, 0 deletions
diff --git a/drivers/power/supply/bq25890_charger.c b/drivers/power/supply/bq25890_charger.c index 557ba532d31a..f8636cf86505 100644 --- a/drivers/power/supply/bq25890_charger.c +++ b/drivers/power/supply/bq25890_charger.c @@ -775,6 +775,7 @@ static void bq25890_charger_external_power_changed(struct power_supply *psy) } bq25890_field_write(bq, F_IINLIM, input_current_limit); + power_supply_changed(psy); } static int bq25890_get_chip_state(struct bq25890_device *bq, @@ -1106,6 +1107,8 @@ static void bq25890_pump_express_work(struct work_struct *data) dev_info(bq->dev, "Hi-voltage charging requested, input voltage is %d mV\n", voltage); + power_supply_changed(bq->charger); + return; error_print: bq25890_field_write(bq, F_PUMPX_EN, 0); |