Merge tag 'at91-drivers-for-3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux

Pull AT91 reset, poweroff and ram drivers from Maxime Ripard:
 "This tag holds the various new drivers introduced to move code that used to be
  in mach-at91 over to the proper frameworks.

  These files are the reboot and poweroff code for all AT91 SoCs but the RM9200,
  and the ram controller driver is not doing much at the time, except for grabing
  the RAM clock in order to leave it always enabled."

Conflicts:
	arch/arm/mach-at91/Kconfig

4 files changed, 435 insertions, 8 deletions

diff --git a/drivers/power/reset/Kconfig b/drivers/power/reset/Kconfig
index ca41523bbebf..c1c046d0464e 100644
--- a/drivers/power/reset/Kconfig
+++ b/drivers/power/reset/Kconfig
@@ -6,15 +6,33 @@ menuconfig POWER_RESET
 
 	  Say Y here to enable board reset and power off
 
+if POWER_RESET
+
 config POWER_RESET_AS3722
 	bool "ams AS3722 power-off driver"
-	depends on MFD_AS3722 && POWER_RESET
+	depends on MFD_AS3722
 	help
 	  This driver supports turning off board via a ams AS3722 power-off.
 
+config POWER_RESET_AT91_POWEROFF
+	bool "Atmel AT91 poweroff driver"
+	depends on MACH_AT91
+	default SOC_AT91SAM9 || SOC_SAMA5
+	help
+	  This driver supports poweroff for Atmel AT91SAM9 and SAMA5
+	  SoCs
+
+config POWER_RESET_AT91_RESET
+	bool "Atmel AT91 reset driver"
+	depends on MACH_AT91
+	default SOC_AT91SAM9 || SOC_SAMA5
+	help
+	  This driver supports restart for Atmel AT91SAM9 and SAMA5
+	  SoCs
+
 config POWER_RESET_AXXIA
 	bool "LSI Axxia reset driver"
-	depends on POWER_RESET && ARCH_AXXIA
+	depends on ARCH_AXXIA
 	help
 	  This driver supports restart for Axxia SoC.
 
@@ -33,7 +51,7 @@ config POWER_RESET_BRCMSTB
 
 config POWER_RESET_GPIO
 	bool "GPIO power-off driver"
-	depends on OF_GPIO && POWER_RESET
+	depends on OF_GPIO
 	help
 	  This driver supports turning off your board via a GPIO line.
 	  If your board needs a GPIO high/low to power down, say Y and
@@ -47,13 +65,13 @@ config POWER_RESET_HISI
 
 config POWER_RESET_MSM
 	bool "Qualcomm MSM power-off driver"
-	depends on POWER_RESET && ARCH_QCOM
+	depends on ARCH_QCOM
 	help
 	  Power off and restart support for Qualcomm boards.
 
 config POWER_RESET_QNAP
 	bool "QNAP power-off driver"
-	depends on OF_GPIO && POWER_RESET && PLAT_ORION
+	depends on OF_GPIO && PLAT_ORION
 	help
 	  This driver supports turning off QNAP NAS devices by sending
 	  commands to the microcontroller which controls the main power.
@@ -71,14 +89,13 @@ config POWER_RESET_RESTART
 config POWER_RESET_SUN6I
 	bool "Allwinner A31 SoC reset driver"
 	depends on ARCH_SUNXI
-	depends on POWER_RESET
 	help
 	  Reboot support for the Allwinner A31 SoCs.
 
 config POWER_RESET_VEXPRESS
 	bool "ARM Versatile Express power-off and reset driver"
 	depends on ARM || ARM64
-	depends on POWER_RESET && VEXPRESS_CONFIG
+	depends on VEXPRESS_CONFIG
 	help
 	  Power off and reset support for the ARM Ltd. Versatile
 	  Express boards.
@@ -86,7 +103,6 @@ config POWER_RESET_VEXPRESS
 config POWER_RESET_XGENE
 	bool "APM SoC X-Gene reset driver"
 	depends on ARM64
-	depends on POWER_RESET
 	help
 	  Reboot support for the APM SoC X-Gene Eval boards.
 
@@ -97,3 +113,4 @@ config POWER_RESET_KEYSTONE
 	help
 	  Reboot support for the KEYSTONE SoCs.
 
+endif
diff --git a/drivers/power/reset/Makefile b/drivers/power/reset/Makefile
index a42e70edd037..4433a753fd93 100644
--- a/drivers/power/reset/Makefile
+++ b/drivers/power/reset/Makefile
@@ -1,4 +1,6 @@
 obj-$(CONFIG_POWER_RESET_AS3722) += as3722-poweroff.o
+obj-$(CONFIG_POWER_RESET_AT91_POWEROFF) += at91-poweroff.o
+obj-$(CONFIG_POWER_RESET_AT91_RESET) += at91-reset.o
 obj-$(CONFIG_POWER_RESET_AXXIA) += axxia-reset.o
 obj-$(CONFIG_POWER_RESET_BRCMSTB) += brcmstb-reboot.o
 obj-$(CONFIG_POWER_RESET_GPIO) += gpio-poweroff.o
diff --git a/drivers/power/reset/at91-poweroff.c b/drivers/power/reset/at91-poweroff.c
new file mode 100644
index 000000000000..40bf42d146f1
--- /dev/null
+++ b/drivers/power/reset/at91-poweroff.c
@@ -0,0 +1,156 @@
+/*
+ * Atmel AT91 SAM9 SoCs reset code
+ *
+ * Copyright (C) 2007 Atmel Corporation.
+ * Copyright (C) 2011 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ * Copyright (C) 2014 Free Electrons
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/printk.h>
+
+#define AT91_SHDW_CR	0x00		/* Shut Down Control Register */
+#define AT91_SHDW_SHDW		BIT(0)			/* Shut Down command */
+#define AT91_SHDW_KEY		(0xa5 << 24)		/* KEY Password */
+
+#define AT91_SHDW_MR	0x04		/* Shut Down Mode Register */
+#define AT91_SHDW_WKMODE0	GENMASK(2, 0)		/* Wake-up 0 Mode Selection */
+#define AT91_SHDW_CPTWK0_MAX	0xf			/* Maximum Counter On Wake Up 0 */
+#define AT91_SHDW_CPTWK0	(AT91_SHDW_CPTWK0_MAX << 4) /* Counter On Wake Up 0 */
+#define AT91_SHDW_CPTWK0_(x)	((x) << 4)
+#define AT91_SHDW_RTTWKEN	BIT(16)			/* Real Time Timer Wake-up Enable */
+#define AT91_SHDW_RTCWKEN	BIT(17)			/* Real Time Clock Wake-up Enable */
+
+#define AT91_SHDW_SR	0x08		/* Shut Down Status Register */
+#define AT91_SHDW_WAKEUP0	BIT(0)			/* Wake-up 0 Status */
+#define AT91_SHDW_RTTWK		BIT(16)			/* Real-time Timer Wake-up */
+#define AT91_SHDW_RTCWK		BIT(17)			/* Real-time Clock Wake-up [SAM9RL] */
+
+enum wakeup_type {
+	AT91_SHDW_WKMODE0_NONE		= 0,
+	AT91_SHDW_WKMODE0_HIGH		= 1,
+	AT91_SHDW_WKMODE0_LOW		= 2,
+	AT91_SHDW_WKMODE0_ANYLEVEL	= 3,
+};
+
+static const char *shdwc_wakeup_modes[] = {
+	[AT91_SHDW_WKMODE0_NONE]	= "none",
+	[AT91_SHDW_WKMODE0_HIGH]	= "high",
+	[AT91_SHDW_WKMODE0_LOW]		= "low",
+	[AT91_SHDW_WKMODE0_ANYLEVEL]	= "any",
+};
+
+static void __iomem *at91_shdwc_base;
+
+static void __init at91_wakeup_status(void)
+{
+	u32 reg = readl(at91_shdwc_base);
+	char *reason = "unknown";
+
+	/* Simple power-on, just bail out */
+	if (!reg)
+		return;
+
+	if (reg & AT91_SHDW_RTTWK)
+		reason = "RTT";
+	else if (reg & AT91_SHDW_RTCWK)
+		reason = "RTC";
+
+	pr_info("AT91: Wake-Up source: %s\n", reason);
+}
+
+static void at91_poweroff(void)
+{
+	writel(AT91_SHDW_KEY | AT91_SHDW_SHDW, at91_shdwc_base + AT91_SHDW_CR);
+}
+
+const enum wakeup_type at91_poweroff_get_wakeup_mode(struct device_node *np)
+{
+	const char *pm;
+	int err, i;
+
+	err = of_property_read_string(np, "atmel,wakeup-mode", &pm);
+	if (err < 0)
+		return AT91_SHDW_WKMODE0_ANYLEVEL;
+
+	for (i = 0; i < ARRAY_SIZE(shdwc_wakeup_modes); i++)
+		if (!strcasecmp(pm, shdwc_wakeup_modes[i]))
+			return i;
+
+	return -ENODEV;
+}
+
+static void at91_poweroff_dt_set_wakeup_mode(struct platform_device *pdev)
+{
+	struct device_node *np = pdev->dev.of_node;
+	enum wakeup_type wakeup_mode;
+	u32 mode = 0, tmp;
+
+	wakeup_mode = at91_poweroff_get_wakeup_mode(np);
+	if (wakeup_mode < 0) {
+		dev_warn(&pdev->dev, "shdwc unknown wakeup mode\n");
+		return;
+	}
+
+	if (!of_property_read_u32(np, "atmel,wakeup-counter", &tmp)) {
+		if (tmp > AT91_SHDW_CPTWK0_MAX) {
+			dev_warn(&pdev->dev,
+				 "shdwc wakeup counter 0x%x > 0x%x reduce it to 0x%x\n",
+				 tmp, AT91_SHDW_CPTWK0_MAX, AT91_SHDW_CPTWK0_MAX);
+			tmp = AT91_SHDW_CPTWK0_MAX;
+		}
+		mode |= AT91_SHDW_CPTWK0_(tmp);
+	}
+
+	if (of_property_read_bool(np, "atmel,wakeup-rtc-timer"))
+			mode |= AT91_SHDW_RTCWKEN;
+
+	if (of_property_read_bool(np, "atmel,wakeup-rtt-timer"))
+			mode |= AT91_SHDW_RTTWKEN;
+
+	writel(wakeup_mode | mode, at91_shdwc_base + AT91_SHDW_MR);
+}
+
+static int at91_poweroff_probe(struct platform_device *pdev)
+{
+	struct resource *res;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	at91_shdwc_base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(at91_shdwc_base)) {
+		dev_err(&pdev->dev, "Could not map reset controller address\n");
+		return PTR_ERR(at91_shdwc_base);
+	}
+
+	at91_wakeup_status();
+
+	if (pdev->dev.of_node)
+		at91_poweroff_dt_set_wakeup_mode(pdev);
+
+	pm_power_off = at91_poweroff;
+
+	return 0;
+}
+
+static struct of_device_id at91_poweroff_of_match[] = {
+	{ .compatible = "atmel,at91sam9260-shdwc", },
+	{ .compatible = "atmel,at91sam9rl-shdwc", },
+	{ .compatible = "atmel,at91sam9x5-shdwc", },
+	{ /*sentinel*/ }
+};
+
+static struct platform_driver at91_poweroff_driver = {
+	.probe = at91_poweroff_probe,
+	.driver = {
+		.name = "at91-poweroff",
+		.of_match_table = at91_poweroff_of_match,
+	},
+};
+module_platform_driver(at91_poweroff_driver);
diff --git a/drivers/power/reset/at91-reset.c b/drivers/power/reset/at91-reset.c
new file mode 100644
index 000000000000..3611806c9cfd
--- /dev/null
+++ b/drivers/power/reset/at91-reset.c
@@ -0,0 +1,252 @@
+/*
+ * Atmel AT91 SAM9 SoCs reset code
+ *
+ * Copyright (C) 2007 Atmel Corporation.
+ * Copyright (C) BitBox Ltd 2010
+ * Copyright (C) 2011 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcosoft.com>
+ * Copyright (C) 2014 Free Electrons
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of_address.h>
+#include <linux/platform_device.h>
+#include <linux/reboot.h>
+
+#include <asm/system_misc.h>
+
+#include <mach/at91sam9_ddrsdr.h>
+#include <mach/at91sam9_sdramc.h>
+
+#define AT91_RSTC_CR	0x00		/* Reset Controller Control Register */
+#define AT91_RSTC_PROCRST	BIT(0)		/* Processor Reset */
+#define AT91_RSTC_PERRST	BIT(2)		/* Peripheral Reset */
+#define AT91_RSTC_EXTRST	BIT(3)		/* External Reset */
+#define AT91_RSTC_KEY		(0xa5 << 24)	/* KEY Password */
+
+#define AT91_RSTC_SR	0x04		/* Reset Controller Status Register */
+#define AT91_RSTC_URSTS		BIT(0)		/* User Reset Status */
+#define AT91_RSTC_RSTTYP	GENMASK(10, 8)	/* Reset Type */
+#define AT91_RSTC_NRSTL		BIT(16)		/* NRST Pin Level */
+#define AT91_RSTC_SRCMP		BIT(17)		/* Software Reset Command in Progress */
+
+#define AT91_RSTC_MR	0x08		/* Reset Controller Mode Register */
+#define AT91_RSTC_URSTEN	BIT(0)		/* User Reset Enable */
+#define AT91_RSTC_URSTIEN	BIT(4)		/* User Reset Interrupt Enable */
+#define AT91_RSTC_ERSTL		GENMASK(11, 8)	/* External Reset Length */
+
+enum reset_type {
+	RESET_TYPE_GENERAL	= 0,
+	RESET_TYPE_WAKEUP	= 1,
+	RESET_TYPE_WATCHDOG	= 2,
+	RESET_TYPE_SOFTWARE	= 3,
+	RESET_TYPE_USER		= 4,
+};
+
+static void __iomem *at91_ramc_base[2], *at91_rstc_base;
+
+/*
+* unless the SDRAM is cleanly shutdown before we hit the
+* reset register it can be left driving the data bus and
+* killing the chance of a subsequent boot from NAND
+*/
+static void at91sam9260_restart(enum reboot_mode mode, const char *cmd)
+{
+	asm volatile(
+		/* Align to cache lines */
+		".balign 32\n\t"
+
+		/* Disable SDRAM accesses */
+		"str	%2, [%0, #" __stringify(AT91_SDRAMC_TR) "]\n\t"
+
+		/* Power down SDRAM */
+		"str	%3, [%0, #" __stringify(AT91_SDRAMC_LPR) "]\n\t"
+
+		/* Reset CPU */
+		"str	%4, [%1, #" __stringify(AT91_RSTC_CR) "]\n\t"
+
+		"b	.\n\t"
+		:
+		: "r" (at91_ramc_base[0]),
+		  "r" (at91_rstc_base),
+		  "r" (1),
+		  "r" (AT91_SDRAMC_LPCB_POWER_DOWN),
+		  "r" (AT91_RSTC_KEY | AT91_RSTC_PERRST | AT91_RSTC_PROCRST));
+}
+
+static void at91sam9g45_restart(enum reboot_mode mode, const char *cmd)
+{
+	asm volatile(
+		/*
+		 * Test wether we have a second RAM controller to care
+		 * about.
+		 *
+		 * First, test that we can dereference the virtual address.
+		 */
+		"cmp	%1, #0\n\t"
+		"beq	1f\n\t"
+
+		/* Then, test that the RAM controller is enabled */
+		"ldr	r0, [%1]\n\t"
+		"cmp	r0, #0\n\t"
+
+		/* Align to cache lines */
+		".balign 32\n\t"
+
+		/* Disable SDRAM0 accesses */
+		"1:	str	%3, [%0, #" __stringify(AT91_DDRSDRC_RTR) "]\n\t"
+		/* Power down SDRAM0 */
+		"	str	%4, [%0, #" __stringify(AT91_DDRSDRC_RTR) "]\n\t"
+		/* Disable SDRAM1 accesses */
+		"	strne	%3, [%1, #" __stringify(AT91_DDRSDRC_RTR) "]\n\t"
+		/* Power down SDRAM1 */
+		"	strne	%4, [%1, #" __stringify(AT91_DDRSDRC_RTR) "]\n\t"
+		/* Reset CPU */
+		"	str	%5, [%2, #" __stringify(AT91_RSTC_CR) "]\n\t"
+
+		"	b	.\n\t"
+		:
+		: "r" (at91_ramc_base[0]),
+		  "r" (at91_ramc_base[1]),
+		  "r" (at91_rstc_base),
+		  "r" (1),
+		  "r" (AT91_DDRSDRC_LPCB_POWER_DOWN),
+		  "r" (AT91_RSTC_KEY | AT91_RSTC_PERRST | AT91_RSTC_PROCRST)
+		: "r0");
+}
+
+static void __init at91_reset_status(struct platform_device *pdev)
+{
+	u32 reg = readl(at91_rstc_base + AT91_RSTC_SR);
+	char *reason;
+
+	switch ((reg & AT91_RSTC_RSTTYP) >> 8) {
+	case RESET_TYPE_GENERAL:
+		reason = "general reset";
+		break;
+	case RESET_TYPE_WAKEUP:
+		reason = "wakeup";
+		break;
+	case RESET_TYPE_WATCHDOG:
+		reason = "watchdog reset";
+		break;
+	case RESET_TYPE_SOFTWARE:
+		reason = "software reset";
+		break;
+	case RESET_TYPE_USER:
+		reason = "user reset";
+		break;
+	default:
+		reason = "unknown reset";
+		break;
+	}
+
+	pr_info("AT91: Starting after %s\n", reason);
+}
+
+static struct of_device_id at91_ramc_of_match[] = {
+	{ .compatible = "atmel,at91sam9260-sdramc", },
+	{ .compatible = "atmel,at91sam9g45-ddramc", },
+	{ .compatible = "atmel,sama5d3-ddramc", },
+	{ /* sentinel */ }
+};
+
+static struct of_device_id at91_reset_of_match[] = {
+	{ .compatible = "atmel,at91sam9260-rstc", .data = at91sam9260_restart },
+	{ .compatible = "atmel,at91sam9g45-rstc", .data = at91sam9g45_restart },
+	{ /* sentinel */ }
+};
+
+static int at91_reset_of_probe(struct platform_device *pdev)
+{
+	const struct of_device_id *match;
+	struct device_node *np;
+	int idx = 0;
+
+	at91_rstc_base = of_iomap(pdev->dev.of_node, 0);
+	if (!at91_rstc_base) {
+		dev_err(&pdev->dev, "Could not map reset controller address\n");
+		return -ENODEV;
+	}
+
+	for_each_matching_node(np, at91_ramc_of_match) {
+		at91_ramc_base[idx] = of_iomap(np, 0);
+		if (!at91_ramc_base[idx]) {
+			dev_err(&pdev->dev, "Could not map ram controller address\n");
+			return -ENODEV;
+		}
+		idx++;
+	}
+
+	match = of_match_node(at91_reset_of_match, pdev->dev.of_node);
+	arm_pm_restart = match->data;
+
+	return 0;
+}
+
+static int at91_reset_platform_probe(struct platform_device *pdev)
+{
+	const struct platform_device_id *match;
+	struct resource *res;
+	int idx = 0;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	at91_rstc_base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(at91_rstc_base)) {
+		dev_err(&pdev->dev, "Could not map reset controller address\n");
+		return PTR_ERR(at91_rstc_base);
+	}
+
+	for (idx = 0; idx < 2; idx++) {
+		res = platform_get_resource(pdev, IORESOURCE_MEM, idx + 1 );
+		at91_ramc_base[idx] = devm_ioremap(&pdev->dev, res->start,
+						   resource_size(res));
+		if (IS_ERR(at91_ramc_base[idx])) {
+			dev_err(&pdev->dev, "Could not map ram controller address\n");
+			return PTR_ERR(at91_ramc_base[idx]);
+		}
+	}
+
+	match = platform_get_device_id(pdev);
+	arm_pm_restart = (void (*)(enum reboot_mode, const char*))
+		match->driver_data;
+
+	return 0;
+}
+
+static int at91_reset_probe(struct platform_device *pdev)
+{
+	int ret;
+
+	if (pdev->dev.of_node)
+		ret = at91_reset_of_probe(pdev);
+	else
+		ret = at91_reset_platform_probe(pdev);
+
+	if (ret)
+		return ret;
+
+	at91_reset_status(pdev);
+
+	return 0;
+}
+
+static struct platform_device_id at91_reset_plat_match[] = {
+	{ "at91-sam9260-reset", (unsigned long)at91sam9260_restart },
+	{ "at91-sam9g45-reset", (unsigned long)at91sam9g45_restart },
+	{ /* sentinel */ }
+};
+
+static struct platform_driver at91_reset_driver = {
+	.probe = at91_reset_probe,
+	.driver = {
+		.name = "at91-reset",
+		.of_match_table = at91_reset_of_match,
+	},
+	.id_table = at91_reset_plat_match,
+};
+module_platform_driver(at91_reset_driver);