Merge 5.12-rc6 into driver-core-next

We need the driver core fixes in here as well.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

12 files changed, 190 insertions, 109 deletions

diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig
index ad4e630e73e2..461ec61530eb 100644
--- a/drivers/platform/x86/Kconfig
+++ b/drivers/platform/x86/Kconfig
@@ -1173,15 +1173,20 @@ config INTEL_PMC_CORE
 	depends on PCI
 	help
 	  The Intel Platform Controller Hub for Intel Core SoCs provides access
-	  to Power Management Controller registers via a PCI interface. This
+	  to Power Management Controller registers via various interfaces. This
 	  driver can utilize debugging capabilities and supported features as
-	  exposed by the Power Management Controller.
+	  exposed by the Power Management Controller. It also may perform some
+	  tasks in the PMC in order to enable transition into the SLPS0 state.
+	  It should be selected on all Intel platforms supported by the driver.
 
 	  Supported features:
 		- SLP_S0_RESIDENCY counter
 		- PCH IP Power Gating status
-		- LTR Ignore
+		- LTR Ignore / LTR Show
 		- MPHY/PLL gating status (Sunrisepoint PCH only)
+		- SLPS0 Debug registers (Cannonlake/Icelake PCH)
+		- Low Power Mode registers (Tigerlake and beyond)
+		- PMC quirks as needed to enable SLPS0/S0ix
 
 config INTEL_PMT_CLASS
 	tristate
diff --git a/drivers/platform/x86/dell/dell-wmi-sysman/enum-attributes.c b/drivers/platform/x86/dell/dell-wmi-sysman/enum-attributes.c
index 80f4b7785c6c..091e48c217ed 100644
--- a/drivers/platform/x86/dell/dell-wmi-sysman/enum-attributes.c
+++ b/drivers/platform/x86/dell/dell-wmi-sysman/enum-attributes.c
@@ -185,5 +185,8 @@ void exit_enum_attributes(void)
 			sysfs_remove_group(wmi_priv.enumeration_data[instance_id].attr_name_kobj,
 								&enumeration_attr_group);
 	}
+	wmi_priv.enumeration_instances_count = 0;
+
 	kfree(wmi_priv.enumeration_data);
+	wmi_priv.enumeration_data = NULL;
 }
diff --git a/drivers/platform/x86/dell/dell-wmi-sysman/int-attributes.c b/drivers/platform/x86/dell/dell-wmi-sysman/int-attributes.c
index 75aedbb733be..8a49ba6e44f9 100644
--- a/drivers/platform/x86/dell/dell-wmi-sysman/int-attributes.c
+++ b/drivers/platform/x86/dell/dell-wmi-sysman/int-attributes.c
@@ -175,5 +175,8 @@ void exit_int_attributes(void)
 			sysfs_remove_group(wmi_priv.integer_data[instance_id].attr_name_kobj,
 								&integer_attr_group);
 	}
+	wmi_priv.integer_instances_count = 0;
+
 	kfree(wmi_priv.integer_data);
+	wmi_priv.integer_data = NULL;
 }
diff --git a/drivers/platform/x86/dell/dell-wmi-sysman/passobj-attributes.c b/drivers/platform/x86/dell/dell-wmi-sysman/passobj-attributes.c
index 3abcd95477c0..834b3e82ad9f 100644
--- a/drivers/platform/x86/dell/dell-wmi-sysman/passobj-attributes.c
+++ b/drivers/platform/x86/dell/dell-wmi-sysman/passobj-attributes.c
@@ -183,5 +183,8 @@ void exit_po_attributes(void)
 			sysfs_remove_group(wmi_priv.po_data[instance_id].attr_name_kobj,
 								&po_attr_group);
 	}
+	wmi_priv.po_instances_count = 0;
+
 	kfree(wmi_priv.po_data);
+	wmi_priv.po_data = NULL;
 }
diff --git a/drivers/platform/x86/dell/dell-wmi-sysman/string-attributes.c b/drivers/platform/x86/dell/dell-wmi-sysman/string-attributes.c
index ac75dce88a4c..552537852459 100644
--- a/drivers/platform/x86/dell/dell-wmi-sysman/string-attributes.c
+++ b/drivers/platform/x86/dell/dell-wmi-sysman/string-attributes.c
@@ -155,5 +155,8 @@ void exit_str_attributes(void)
 			sysfs_remove_group(wmi_priv.str_data[instance_id].attr_name_kobj,
 								&str_attr_group);
 	}
+	wmi_priv.str_instances_count = 0;
+
 	kfree(wmi_priv.str_data);
+	wmi_priv.str_data = NULL;
 }
diff --git a/drivers/platform/x86/dell/dell-wmi-sysman/sysman.c b/drivers/platform/x86/dell/dell-wmi-sysman/sysman.c
index cb81010ba1a2..7410ccae650c 100644
--- a/drivers/platform/x86/dell/dell-wmi-sysman/sysman.c
+++ b/drivers/platform/x86/dell/dell-wmi-sysman/sysman.c
@@ -210,25 +210,17 @@ static struct kobj_attribute pending_reboot = __ATTR_RO(pending_reboot);
  */
 static int create_attributes_level_sysfs_files(void)
 {
-	int ret = sysfs_create_file(&wmi_priv.main_dir_kset->kobj, &reset_bios.attr);
+	int ret;
 
-	if (ret) {
-		pr_debug("could not create reset_bios file\n");
+	ret = sysfs_create_file(&wmi_priv.main_dir_kset->kobj, &reset_bios.attr);
+	if (ret)
 		return ret;
-	}
 
 	ret = sysfs_create_file(&wmi_priv.main_dir_kset->kobj, &pending_reboot.attr);
-	if (ret) {
-		pr_debug("could not create changing_pending_reboot file\n");
-		sysfs_remove_file(&wmi_priv.main_dir_kset->kobj, &reset_bios.attr);
-	}
-	return ret;
-}
+	if (ret)
+		return ret;
 
-static void release_reset_bios_data(void)
-{
-	sysfs_remove_file(&wmi_priv.main_dir_kset->kobj, &reset_bios.attr);
-	sysfs_remove_file(&wmi_priv.main_dir_kset->kobj, &pending_reboot.attr);
+	return 0;
 }
 
 static ssize_t wmi_sysman_attr_show(struct kobject *kobj, struct attribute *attr,
@@ -373,8 +365,6 @@ static void destroy_attribute_objs(struct kset *kset)
  */
 static void release_attributes_data(void)
 {
-	release_reset_bios_data();
-
 	mutex_lock(&wmi_priv.mutex);
 	exit_enum_attributes();
 	exit_int_attributes();
@@ -386,11 +376,13 @@ static void release_attributes_data(void)
 		wmi_priv.authentication_dir_kset = NULL;
 	}
 	if (wmi_priv.main_dir_kset) {
+		sysfs_remove_file(&wmi_priv.main_dir_kset->kobj, &reset_bios.attr);
+		sysfs_remove_file(&wmi_priv.main_dir_kset->kobj, &pending_reboot.attr);
 		destroy_attribute_objs(wmi_priv.main_dir_kset);
 		kset_unregister(wmi_priv.main_dir_kset);
+		wmi_priv.main_dir_kset = NULL;
 	}
 	mutex_unlock(&wmi_priv.mutex);
-
 }
 
 /**
@@ -497,7 +489,6 @@ nextobj:
 
 err_attr_init:
 	mutex_unlock(&wmi_priv.mutex);
-	release_attributes_data();
 	kfree(obj);
 	return retval;
 }
@@ -513,102 +504,91 @@ static int __init sysman_init(void)
 	}
 
 	ret = init_bios_attr_set_interface();
-	if (ret || !wmi_priv.bios_attr_wdev) {
-		pr_debug("failed to initialize set interface\n");
-		goto fail_set_interface;
-	}
+	if (ret)
+		return ret;
 
 	ret = init_bios_attr_pass_interface();
-	if (ret || !wmi_priv.password_attr_wdev) {
-		pr_debug("failed to initialize pass interface\n");
-		goto fail_pass_interface;
+	if (ret)
+		goto err_exit_bios_attr_set_interface;
+
+	if (!wmi_priv.bios_attr_wdev || !wmi_priv.password_attr_wdev) {
+		pr_debug("failed to find set or pass interface\n");
+		ret = -ENODEV;
+		goto err_exit_bios_attr_pass_interface;
 	}
 
 	ret = class_register(&firmware_attributes_class);
 	if (ret)
-		goto fail_class;
+		goto err_exit_bios_attr_pass_interface;
 
 	wmi_priv.class_dev = device_create(&firmware_attributes_class, NULL, MKDEV(0, 0),
 				  NULL, "%s", DRIVER_NAME);
 	if (IS_ERR(wmi_priv.class_dev)) {
 		ret = PTR_ERR(wmi_priv.class_dev);
-		goto fail_classdev;
+		goto err_unregister_class;
 	}
 
 	wmi_priv.main_dir_kset = kset_create_and_add("attributes", NULL,
 						     &wmi_priv.class_dev->kobj);
 	if (!wmi_priv.main_dir_kset) {
 		ret = -ENOMEM;
-		goto fail_main_kset;
+		goto err_destroy_classdev;
 	}
 
 	wmi_priv.authentication_dir_kset = kset_create_and_add("authentication", NULL,
 								&wmi_priv.class_dev->kobj);
 	if (!wmi_priv.authentication_dir_kset) {
 		ret = -ENOMEM;
-		goto fail_authentication_kset;
+		goto err_release_attributes_data;
 	}
 
 	ret = create_attributes_level_sysfs_files();
 	if (ret) {
 		pr_debug("could not create reset BIOS attribute\n");
-		goto fail_reset_bios;
+		goto err_release_attributes_data;
 	}
 
 	ret = init_bios_attributes(ENUM, DELL_WMI_BIOS_ENUMERATION_ATTRIBUTE_GUID);
 	if (ret) {
 		pr_debug("failed to populate enumeration type attributes\n");
-		goto fail_create_group;
+		goto err_release_attributes_data;
 	}
 
 	ret = init_bios_attributes(INT, DELL_WMI_BIOS_INTEGER_ATTRIBUTE_GUID);
 	if (ret) {
 		pr_debug("failed to populate integer type attributes\n");
-		goto fail_create_group;
+		goto err_release_attributes_data;
 	}
 
 	ret = init_bios_attributes(STR, DELL_WMI_BIOS_STRING_ATTRIBUTE_GUID);
 	if (ret) {
 		pr_debug("failed to populate string type attributes\n");
-		goto fail_create_group;
+		goto err_release_attributes_data;
 	}
 
 	ret = init_bios_attributes(PO, DELL_WMI_BIOS_PASSOBJ_ATTRIBUTE_GUID);
 	if (ret) {
 		pr_debug("failed to populate pass object type attributes\n");
-		goto fail_create_group;
+		goto err_release_attributes_data;
 	}
 
 	return 0;
 
-fail_create_group:
+err_release_attributes_data:
 	release_attributes_data();
 
-fail_reset_bios:
-	if (wmi_priv.authentication_dir_kset) {
-		kset_unregister(wmi_priv.authentication_dir_kset);
-		wmi_priv.authentication_dir_kset = NULL;
-	}
-
-fail_authentication_kset:
-	if (wmi_priv.main_dir_kset) {
-		kset_unregister(wmi_priv.main_dir_kset);
-		wmi_priv.main_dir_kset = NULL;
-	}
-
-fail_main_kset:
+err_destroy_classdev:
 	device_destroy(&firmware_attributes_class, MKDEV(0, 0));
 
-fail_classdev:
+err_unregister_class:
 	class_unregister(&firmware_attributes_class);
 
-fail_class:
+err_exit_bios_attr_pass_interface:
 	exit_bios_attr_pass_interface();
 
-fail_pass_interface:
+err_exit_bios_attr_set_interface:
 	exit_bios_attr_set_interface();
 
-fail_set_interface:
 	return ret;
 }
 
diff --git a/drivers/platform/x86/intel-hid.c b/drivers/platform/x86/intel-hid.c
index 2f5b8d09143e..57cc92891a57 100644
--- a/drivers/platform/x86/intel-hid.c
+++ b/drivers/platform/x86/intel-hid.c
@@ -90,6 +90,13 @@ static const struct dmi_system_id button_array_table[] = {
 			DMI_MATCH(DMI_PRODUCT_NAME, "HP Spectre x2 Detachable"),
 		},
 	},
+	{
+		.ident = "Lenovo ThinkPad X1 Tablet Gen 2",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
+			DMI_MATCH(DMI_PRODUCT_FAMILY, "ThinkPad X1 Tablet Gen 2"),
+		},
+	},
 	{ }
 };
 
diff --git a/drivers/platform/x86/intel-vbtn.c b/drivers/platform/x86/intel-vbtn.c
index 8a8017f9ca91..3fdf4cbec9ad 100644
--- a/drivers/platform/x86/intel-vbtn.c
+++ b/drivers/platform/x86/intel-vbtn.c
@@ -48,8 +48,16 @@ static const struct key_entry intel_vbtn_keymap[] = {
 };
 
 static const struct key_entry intel_vbtn_switchmap[] = {
-	{ KE_SW,     0xCA, { .sw = { SW_DOCK, 1 } } },		/* Docked */
-	{ KE_SW,     0xCB, { .sw = { SW_DOCK, 0 } } },		/* Undocked */
+	/*
+	 * SW_DOCK should only be reported for docking stations, but DSDTs using the
+	 * intel-vbtn code, always seem to use this for 2-in-1s / convertibles and set
+	 * SW_DOCK=1 when in laptop-mode (in tandem with setting SW_TABLET_MODE=0).
+	 * This causes userspace to think the laptop is docked to a port-replicator
+	 * and to disable suspend-on-lid-close, which is undesirable.
+	 * Map the dock events to KEY_IGNORE to avoid this broken SW_DOCK reporting.
+	 */
+	{ KE_IGNORE, 0xCA, { .sw = { SW_DOCK, 1 } } },		/* Docked */
+	{ KE_IGNORE, 0xCB, { .sw = { SW_DOCK, 0 } } },		/* Undocked */
 	{ KE_SW,     0xCC, { .sw = { SW_TABLET_MODE, 1 } } },	/* Tablet */
 	{ KE_SW,     0xCD, { .sw = { SW_TABLET_MODE, 0 } } },	/* Laptop */
 	{ KE_END }
diff --git a/drivers/platform/x86/intel_pmc_core.c b/drivers/platform/x86/intel_pmc_core.c
index ee2f757515b0..b5888aeb4bcf 100644
--- a/drivers/platform/x86/intel_pmc_core.c
+++ b/drivers/platform/x86/intel_pmc_core.c
@@ -863,34 +863,45 @@ out_unlock:
 }
 DEFINE_SHOW_ATTRIBUTE(pmc_core_pll);
 
-static ssize_t pmc_core_ltr_ignore_write(struct file *file,
-					 const char __user *userbuf,
-					 size_t count, loff_t *ppos)
+static int pmc_core_send_ltr_ignore(u32 value)
 {
 	struct pmc_dev *pmcdev = &pmc;
 	const struct pmc_reg_map *map = pmcdev->map;
-	u32 val, buf_size, fd;
-	int err;
-
-	buf_size = count < 64 ? count : 64;
-
-	err = kstrtou32_from_user(userbuf, buf_size, 10, &val);
-	if (err)
-		return err;
+	u32 reg;
+	int err = 0;
 
 	mutex_lock(&pmcdev->lock);
 
-	if (val > map->ltr_ignore_max) {
+	if (value > map->ltr_ignore_max) {
 		err = -EINVAL;
 		goto out_unlock;
 	}
 
-	fd = pmc_core_reg_read(pmcdev, map->ltr_ignore_offset);
-	fd |= (1U << val);
-	pmc_core_reg_write(pmcdev, map->ltr_ignore_offset, fd);
+	reg = pmc_core_reg_read(pmcdev, map->ltr_ignore_offset);
+	reg |= BIT(value);
+	pmc_core_reg_write(pmcdev, map->ltr_ignore_offset, reg);
 
 out_unlock:
 	mutex_unlock(&pmcdev->lock);
+
+	return err;
+}
+
+static ssize_t pmc_core_ltr_ignore_write(struct file *file,
+					 const char __user *userbuf,
+					 size_t count, loff_t *ppos)
+{
+	u32 buf_size, value;
+	int err;
+
+	buf_size = min_t(u32, count, 64);
+
+	err = kstrtou32_from_user(userbuf, buf_size, 10, &value);
+	if (err)
+		return err;
+
+	err = pmc_core_send_ltr_ignore(value);
+
 	return err == 0 ? count : err;
 }
 
@@ -1244,6 +1255,15 @@ static int pmc_core_probe(struct platform_device *pdev)
 	pmcdev->pmc_xram_read_bit = pmc_core_check_read_lock_bit();
 	dmi_check_system(pmc_core_dmi_table);
 
+	/*
+	 * On TGL, due to a hardware limitation, the GBE LTR blocks PC10 when
+	 * a cable is attached. Tell the PMC to ignore it.
+	 */
+	if (pmcdev->map == &tgl_reg_map) {
+		dev_dbg(&pdev->dev, "ignoring GBE LTR\n");
+		pmc_core_send_ltr_ignore(3);
+	}
+
 	pmc_core_dbgfs_register(pmcdev);
 
 	device_initialized = true;
diff --git a/drivers/platform/x86/intel_pmt_class.c b/drivers/platform/x86/intel_pmt_class.c
index c8939fba4509..ee2b3bbeb83d 100644
--- a/drivers/platform/x86/intel_pmt_class.c
+++ b/drivers/platform/x86/intel_pmt_class.c
@@ -173,7 +173,7 @@ static int intel_pmt_dev_register(struct intel_pmt_entry *entry,
 				  struct intel_pmt_namespace *ns,
 				  struct device *parent)
 {
-	struct resource res;
+	struct resource res = {0};
 	struct device *dev;
 	int ret;
 
diff --git a/drivers/platform/x86/intel_pmt_crashlog.c b/drivers/platform/x86/intel_pmt_crashlog.c
index 97dd749c8290..92d315a16cfd 100644
--- a/drivers/platform/x86/intel_pmt_crashlog.c
+++ b/drivers/platform/x86/intel_pmt_crashlog.c
@@ -23,18 +23,17 @@
 #define CRASH_TYPE_OOBMSM	1
 
 /* Control Flags */
-#define CRASHLOG_FLAG_DISABLE		BIT(27)
+#define CRASHLOG_FLAG_DISABLE		BIT(28)
 
 /*
- * Bits 28 and 29 control the state of bit 31.
+ * Bits 29 and 30 control the state of bit 31.
  *
- * Bit 28 will clear bit 31, if set, allowing a new crashlog to be captured.
- * Bit 29 will immediately trigger a crashlog to be generated, setting bit 31.
- * Bit 30 is read-only and reserved as 0.
+ * Bit 29 will clear bit 31, if set, allowing a new crashlog to be captured.
+ * Bit 30 will immediately trigger a crashlog to be generated, setting bit 31.
  * Bit 31 is the read-only status with a 1 indicating log is complete.
  */
-#define CRASHLOG_FLAG_TRIGGER_CLEAR	BIT(28)
-#define CRASHLOG_FLAG_TRIGGER_EXECUTE	BIT(29)
+#define CRASHLOG_FLAG_TRIGGER_CLEAR	BIT(29)
+#define CRASHLOG_FLAG_TRIGGER_EXECUTE	BIT(30)
 #define CRASHLOG_FLAG_TRIGGER_COMPLETE	BIT(31)
 #define CRASHLOG_FLAG_TRIGGER_MASK	GENMASK(31, 28)
 
diff --git a/drivers/platform/x86/thinkpad_acpi.c b/drivers/platform/x86/thinkpad_acpi.c
index b881044b31b0..0d9e2ddbf904 100644
--- a/drivers/platform/x86/thinkpad_acpi.c
+++ b/drivers/platform/x86/thinkpad_acpi.c
@@ -4081,13 +4081,19 @@ static bool hotkey_notify_6xxx(const u32 hkey,
 
 	case TP_HKEY_EV_KEY_NUMLOCK:
 	case TP_HKEY_EV_KEY_FN:
-	case TP_HKEY_EV_KEY_FN_ESC:
 		/* key press events, we just ignore them as long as the EC
 		 * is still reporting them in the normal keyboard stream */
 		*send_acpi_ev = false;
 		*ignore_acpi_ev = true;
 		return true;
 
+	case TP_HKEY_EV_KEY_FN_ESC:
+		/* Get the media key status to foce the status LED to update */
+		acpi_evalf(hkey_handle, NULL, "GMKS", "v");
+		*send_acpi_ev = false;
+		*ignore_acpi_ev = true;
+		return true;
+
 	case TP_HKEY_EV_TABLET_CHANGED:
 		tpacpi_input_send_tabletsw();
 		hotkey_tablet_mode_notify_change();
@@ -9845,6 +9851,11 @@ static struct ibm_struct lcdshadow_driver_data = {
  * Thinkpad sensor interfaces
  */
 
+#define DYTC_CMD_QUERY        0 /* To get DYTC status - enable/revision */
+#define DYTC_QUERY_ENABLE_BIT 8  /* Bit        8 - 0 = disabled, 1 = enabled */
+#define DYTC_QUERY_SUBREV_BIT 16 /* Bits 16 - 27 - sub revision */
+#define DYTC_QUERY_REV_BIT    28 /* Bits 28 - 31 - revision */
+
 #define DYTC_CMD_GET          2 /* To get current IC function and mode */
 #define DYTC_GET_LAPMODE_BIT 17 /* Set when in lapmode */
 
@@ -9855,6 +9866,7 @@ static bool has_palmsensor;
 static bool has_lapsensor;
 static bool palm_state;
 static bool lap_state;
+static int dytc_version;
 
 static int dytc_command(int command, int *output)
 {
@@ -9869,6 +9881,33 @@ static int dytc_command(int command, int *output)
 	return 0;
 }
 
+static int dytc_get_version(void)
+{
+	int err, output;
+
+	/* Check if we've been called before - and just return cached value */
+	if (dytc_version)
+		return dytc_version;
+
+	/* Otherwise query DYTC and extract version information */
+	err = dytc_command(DYTC_CMD_QUERY, &output);
+	/*
+	 * If support isn't available (ENODEV) then don't return an error
+	 * and don't create the sysfs group
+	 */
+	if (err == -ENODEV)
+		return 0;
+	/* For all other errors we can flag the failure */
+	if (err)
+		return err;
+
+	/* Check DYTC is enabled and supports mode setting */
+	if (output & BIT(DYTC_QUERY_ENABLE_BIT))
+		dytc_version = (output >> DYTC_QUERY_REV_BIT) & 0xF;
+
+	return 0;
+}
+
 static int lapsensor_get(bool *present, bool *state)
 {
 	int output, err;
@@ -9974,7 +10013,18 @@ static int tpacpi_proxsensor_init(struct ibm_init_struct *iibm)
 		if (err)
 			return err;
 	}
-	if (has_lapsensor) {
+
+	/* Check if we know the DYTC version, if we don't then get it */
+	if (!dytc_version) {
+		err = dytc_get_version();
+		if (err)
+			return err;
+	}
+	/*
+	 * Platforms before DYTC version 5 claim to have a lap sensor, but it doesn't work, so we
+	 * ignore them
+	 */
+	if (has_lapsensor && (dytc_version >= 5)) {
 		err = sysfs_create_file(&tpacpi_pdev->dev.kobj, &dev_attr_dytc_lapmode.attr);
 		if (err)
 			return err;
@@ -9999,14 +10049,9 @@ static struct ibm_struct proxsensor_driver_data = {
  * DYTC Platform Profile interface
  */
 
-#define DYTC_CMD_QUERY        0 /* To get DYTC status - enable/revision */
 #define DYTC_CMD_SET          1 /* To enable/disable IC function mode */
 #define DYTC_CMD_RESET    0x1ff /* To reset back to default */
 
-#define DYTC_QUERY_ENABLE_BIT 8  /* Bit        8 - 0 = disabled, 1 = enabled */
-#define DYTC_QUERY_SUBREV_BIT 16 /* Bits 16 - 27 - sub revision */
-#define DYTC_QUERY_REV_BIT    28 /* Bits 28 - 31 - revision */
-
 #define DYTC_GET_FUNCTION_BIT 8  /* Bits  8-11 - function setting */
 #define DYTC_GET_MODE_BIT     12 /* Bits 12-15 - mode setting */
 
@@ -10142,8 +10187,13 @@ static int dytc_profile_set(struct platform_profile_handler *pprof,
 		return err;
 
 	if (profile == PLATFORM_PROFILE_BALANCED) {
-		/* To get back to balanced mode we just issue a reset command */
-		err = dytc_command(DYTC_CMD_RESET, &output);
+		/*
+		 * To get back to balanced mode we need to issue a reset command.
+		 * Note we still need to disable CQL mode before hand and re-enable
+		 * it afterwards, otherwise dytc_lapmode gets reset to 0 and stays
+		 * stuck at 0 for aprox. 30 minutes.
+		 */
+		err = dytc_cql_command(DYTC_CMD_RESET, &output);
 		if (err)
 			goto unlock;
 	} else {
@@ -10211,28 +10261,28 @@ static int tpacpi_dytc_profile_init(struct ibm_init_struct *iibm)
 	if (err)
 		return err;
 
+	/* Check if we know the DYTC version, if we don't then get it */
+	if (!dytc_version) {
+		err = dytc_get_version();
+		if (err)
+			return err;
+	}
 	/* Check DYTC is enabled and supports mode setting */
-	if (output & BIT(DYTC_QUERY_ENABLE_BIT)) {
-		/* Only DYTC v5.0 and later has this feature. */
-		int dytc_version;
-
-		dytc_version = (output >> DYTC_QUERY_REV_BIT) & 0xF;
-		if (dytc_version >= 5) {
-			dbg_printk(TPACPI_DBG_INIT,
-				   "DYTC version %d: thermal mode available\n", dytc_version);
-			/* Create platform_profile structure and register */
-			err = platform_profile_register(&dytc_profile);
-			/*
-			 * If for some reason platform_profiles aren't enabled
-			 * don't quit terminally.
-			 */
-			if (err)
-				return 0;
+	if (dytc_version >= 5) {
+		dbg_printk(TPACPI_DBG_INIT,
+				"DYTC version %d: thermal mode available\n", dytc_version);
+		/* Create platform_profile structure and register */
+		err = platform_profile_register(&dytc_profile);
+		/*
+		 * If for some reason platform_profiles aren't enabled
+		 * don't quit terminally.
+		 */
+		if (err)
+			return 0;
 
-			dytc_profile_available = true;
-			/* Ensure initial values are correct */
-			dytc_profile_refresh();
-		}
+		dytc_profile_available = true;
+		/* Ensure initial values are correct */
+		dytc_profile_refresh();
 	}
 	return 0;
 }