mfd / platform: cros_ec: Add sensor_count and make check_features public

Add a new function to return the number of MEMS sensors available in a
ChromeOS Embedded Controller. It uses MOTIONSENSE_CMD_DUMP if available
or a specific memory map ACPI registers to find out.

Also, make check_features public as it can be useful for other drivers
to know what the Embedded Controller supports.

Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Acked-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>

1 files changed, 117 insertions, 0 deletions

diff --git a/drivers/platform/chrome/cros_ec_proto.c b/drivers/platform/chrome/cros_ec_proto.c
index 7db58771ec77..12bdd1f3aee9 100644
--- a/drivers/platform/chrome/cros_ec_proto.c
+++ b/drivers/platform/chrome/cros_ec_proto.c
@@ -717,3 +717,120 @@ u32 cros_ec_get_host_event(struct cros_ec_device *ec_dev)
 	return host_event;
 }
 EXPORT_SYMBOL(cros_ec_get_host_event);
+
+/**
+ * cros_ec_check_features() - Test for the presence of EC features
+ *
+ * @ec: EC device, does not have to be connected directly to the AP,
+ *      can be daisy chained through another device.
+ * @feature: One of ec_feature_code bit.
+ *
+ * Call this function to test whether the ChromeOS EC supports a feature.
+ *
+ * Return: 1 if supported, 0 if not
+ */
+int cros_ec_check_features(struct cros_ec_dev *ec, int feature)
+{
+	struct cros_ec_command *msg;
+	int ret;
+
+	if (ec->features[0] == -1U && ec->features[1] == -1U) {
+		/* features bitmap not read yet */
+		msg = kzalloc(sizeof(*msg) + sizeof(ec->features), GFP_KERNEL);
+		if (!msg)
+			return -ENOMEM;
+
+		msg->command = EC_CMD_GET_FEATURES + ec->cmd_offset;
+		msg->insize = sizeof(ec->features);
+
+		ret = cros_ec_cmd_xfer_status(ec->ec_dev, msg);
+		if (ret < 0) {
+			dev_warn(ec->dev, "cannot get EC features: %d/%d\n",
+				 ret, msg->result);
+			memset(ec->features, 0, sizeof(ec->features));
+		} else {
+			memcpy(ec->features, msg->data, sizeof(ec->features));
+		}
+
+		dev_dbg(ec->dev, "EC features %08x %08x\n",
+			ec->features[0], ec->features[1]);
+
+		kfree(msg);
+	}
+
+	return ec->features[feature / 32] & EC_FEATURE_MASK_0(feature);
+}
+EXPORT_SYMBOL_GPL(cros_ec_check_features);
+
+/**
+ * cros_ec_get_sensor_count() - Return the number of MEMS sensors supported.
+ *
+ * @ec: EC device, does not have to be connected directly to the AP,
+ *      can be daisy chained through another device.
+ * Return: < 0 in case of error.
+ */
+int cros_ec_get_sensor_count(struct cros_ec_dev *ec)
+{
+	/*
+	 * Issue a command to get the number of sensor reported.
+	 * If not supported, check for legacy mode.
+	 */
+	int ret, sensor_count;
+	struct ec_params_motion_sense *params;
+	struct ec_response_motion_sense *resp;
+	struct cros_ec_command *msg;
+	struct cros_ec_device *ec_dev = ec->ec_dev;
+	u8 status;
+
+	msg = kzalloc(sizeof(*msg) + max(sizeof(*params), sizeof(*resp)),
+		      GFP_KERNEL);
+	if (!msg)
+		return -ENOMEM;
+
+	msg->version = 1;
+	msg->command = EC_CMD_MOTION_SENSE_CMD + ec->cmd_offset;
+	msg->outsize = sizeof(*params);
+	msg->insize = sizeof(*resp);
+
+	params = (struct ec_params_motion_sense *)msg->data;
+	params->cmd = MOTIONSENSE_CMD_DUMP;
+
+	ret = cros_ec_cmd_xfer(ec->ec_dev, msg);
+	if (ret < 0) {
+		sensor_count = ret;
+	} else if (msg->result != EC_RES_SUCCESS) {
+		sensor_count = -EPROTO;
+	} else {
+		resp = (struct ec_response_motion_sense *)msg->data;
+		sensor_count = resp->dump.sensor_count;
+	}
+	kfree(msg);
+
+	/*
+	 * Check legacy mode: Let's find out if sensors are accessible
+	 * via LPC interface.
+	 */
+	if (sensor_count == -EPROTO &&
+	    ec->cmd_offset == 0 &&
+	    ec_dev->cmd_readmem) {
+		ret = ec_dev->cmd_readmem(ec_dev, EC_MEMMAP_ACC_STATUS,
+				1, &status);
+		if (ret >= 0 &&
+		    (status & EC_MEMMAP_ACC_STATUS_PRESENCE_BIT)) {
+			/*
+			 * We have 2 sensors, one in the lid, one in the base.
+			 */
+			sensor_count = 2;
+		} else {
+			/*
+			 * EC uses LPC interface and no sensors are presented.
+			 */
+			sensor_count = 0;
+		}
+	} else if (sensor_count == -EPROTO) {
+		/* EC responded, but does not understand DUMP command. */
+		sensor_count = 0;
+	}
+	return sensor_count;
+}
+EXPORT_SYMBOL_GPL(cros_ec_get_sensor_count);