diff options
| author | Grzegorz Jaszczyk <jaz@semihalf.com> | 2019-07-31 14:21:15 +0200 |
|---|---|---|
| committer | Kishon Vijay Abraham I <kishon@ti.com> | 2019-08-27 11:37:09 +0530 |
| commit | c527a636d6200b0583caa7dee2427b0de218fb2c (patch) | |
| tree | bcaa3438b60cf6c66a9606d3db6ca59aea180811 /drivers/phy | |
| parent | 96888aed3d09862c1d80b3ccb405b4bcf6d827c5 (diff) | |
phy: mvebu-cp110-comphy: Add USB3 host/device support
Add USB3 host/device support by adding the right entries in the COMPHY
modes table. A new macro is created to instantiate a "generic" mode
ie. not an Ethernet one. This macro will be re-used when adding SATA
support.
Signed-off-by: Grzegorz Jaszczyk <jaz@semihalf.com>
[miquel.raynal@bootlin.com: adapt the content to the mainline driver]
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Diffstat (limited to 'drivers/phy')
| -rw-r--r-- | drivers/phy/marvell/phy-mvebu-cp110-comphy.c | 23 |
1 files changed, 23 insertions, 0 deletions
diff --git a/drivers/phy/marvell/phy-mvebu-cp110-comphy.c b/drivers/phy/marvell/phy-mvebu-cp110-comphy.c index 78c309571943..67f44ddefac2 100644 --- a/drivers/phy/marvell/phy-mvebu-cp110-comphy.c +++ b/drivers/phy/marvell/phy-mvebu-cp110-comphy.c @@ -157,6 +157,8 @@ #define COMPHY_FW_MODE_SGMII 0x2 /* SGMII 1G */ #define COMPHY_FW_MODE_HS_SGMII 0x3 /* SGMII 2.5G */ +#define COMPHY_FW_MODE_USB3H 0x4 +#define COMPHY_FW_MODE_USB3D 0x5 #define COMPHY_FW_MODE_RXAUI 0x7 #define COMPHY_FW_MODE_XFI 0x8 /* SFI: 0x9 (is treated like XFI) */ @@ -179,11 +181,23 @@ struct mvebu_comphy_conf { .fw_mode = _fw, \ } +#define GEN_CONF(_lane, _port, _mode, _fw) \ + { \ + .lane = _lane, \ + .port = _port, \ + .mode = _mode, \ + .submode = PHY_INTERFACE_MODE_NA, \ + .mux = -1, \ + .fw_mode = _fw, \ + } + static const struct mvebu_comphy_conf mvebu_comphy_cp110_modes[] = { /* lane 0 */ ETH_CONF(0, 1, PHY_INTERFACE_MODE_SGMII, 0x1, COMPHY_FW_MODE_SGMII), ETH_CONF(0, 1, PHY_INTERFACE_MODE_2500BASEX, 0x1, COMPHY_FW_MODE_HS_SGMII), /* lane 1 */ + GEN_CONF(1, 0, PHY_MODE_USB_HOST_SS, COMPHY_FW_MODE_USB3H), + GEN_CONF(1, 0, PHY_MODE_USB_DEVICE_SS, COMPHY_FW_MODE_USB3D), ETH_CONF(1, 2, PHY_INTERFACE_MODE_SGMII, 0x1, COMPHY_FW_MODE_SGMII), ETH_CONF(1, 2, PHY_INTERFACE_MODE_2500BASEX, 0x1, COMPHY_FW_MODE_HS_SGMII), /* lane 2 */ @@ -191,15 +205,19 @@ static const struct mvebu_comphy_conf mvebu_comphy_cp110_modes[] = { ETH_CONF(2, 0, PHY_INTERFACE_MODE_2500BASEX, 0x1, COMPHY_FW_MODE_HS_SGMII), ETH_CONF(2, 0, PHY_INTERFACE_MODE_RXAUI, -1, COMPHY_FW_MODE_RXAUI), ETH_CONF(2, 0, PHY_INTERFACE_MODE_10GKR, 0x1, COMPHY_FW_MODE_XFI), + GEN_CONF(2, 0, PHY_MODE_USB_HOST_SS, COMPHY_FW_MODE_USB3H), /* lane 3 */ ETH_CONF(3, 1, PHY_INTERFACE_MODE_SGMII, 0x2, COMPHY_FW_MODE_SGMII), ETH_CONF(3, 1, PHY_INTERFACE_MODE_2500BASEX, 0x2, COMPHY_FW_MODE_HS_SGMII), ETH_CONF(3, 1, PHY_INTERFACE_MODE_RXAUI, -1, COMPHY_FW_MODE_RXAUI), + GEN_CONF(3, 1, PHY_MODE_USB_HOST_SS, COMPHY_FW_MODE_USB3H), /* lane 4 */ ETH_CONF(4, 0, PHY_INTERFACE_MODE_SGMII, 0x2, COMPHY_FW_MODE_SGMII), ETH_CONF(4, 0, PHY_INTERFACE_MODE_2500BASEX, 0x2, COMPHY_FW_MODE_HS_SGMII), ETH_CONF(4, 0, PHY_INTERFACE_MODE_10GKR, 0x2, COMPHY_FW_MODE_XFI), ETH_CONF(4, 0, PHY_INTERFACE_MODE_RXAUI, -1, COMPHY_FW_MODE_RXAUI), + GEN_CONF(4, 0, PHY_MODE_USB_DEVICE_SS, COMPHY_FW_MODE_USB3D), + GEN_CONF(4, 1, PHY_MODE_USB_HOST_SS, COMPHY_FW_MODE_USB3H), ETH_CONF(4, 1, PHY_INTERFACE_MODE_SGMII, 0x1, COMPHY_FW_MODE_SGMII), ETH_CONF(4, 1, PHY_INTERFACE_MODE_2500BASEX, -1, COMPHY_FW_MODE_HS_SGMII), ETH_CONF(4, 1, PHY_INTERFACE_MODE_10GKR, -1, COMPHY_FW_MODE_XFI), @@ -643,6 +661,11 @@ static int mvebu_comphy_power_on(struct phy *phy) } fw_param = COMPHY_FW_PARAM_ETH(fw_mode, lane->port, fw_speed); break; + case PHY_MODE_USB_HOST_SS: + case PHY_MODE_USB_DEVICE_SS: + dev_dbg(priv->dev, "set lane %d to USB3 mode\n", lane->id); + fw_param = COMPHY_FW_PARAM(fw_mode, lane->port); + break; default: dev_err(priv->dev, "unsupported PHY mode (%d)\n", lane->mode); return -ENOTSUPP; |