phy: rockchip-usb: add usb-uart setup for rk3188

The rk3188 also supports bringing the uart2 out through
the usb dm+dp pins, so add the necessary setup for it.

rk3066 does not seem to support usb-uart functionality and this
particular phy was only used on older Rockchip socs, so this leaves
room for a bit of cleanup as well, as there most likely won't be new
additions in the driver.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>

1 files changed, 95 insertions, 46 deletions

diff --git a/drivers/phy/rockchip/phy-rockchip-usb.c b/drivers/phy/rockchip/phy-rockchip-usb.c
index 269c86329cb8..b2899c744ad9 100644
--- a/drivers/phy/rockchip/phy-rockchip-usb.c
+++ b/drivers/phy/rockchip/phy-rockchip-usb.c
@@ -36,7 +36,22 @@ static int enable_usb_uart;
 #define HIWORD_UPDATE(val, mask) \
 		((val) | (mask) << 16)
 
-#define UOC_CON0_SIDDQ BIT(13)
+#define UOC_CON0					0x00
+#define UOC_CON0_SIDDQ					BIT(13)
+#define UOC_CON0_DISABLE				BIT(4)
+#define UOC_CON0_COMMON_ON_N				BIT(0)
+
+#define UOC_CON2					0x08
+#define UOC_CON2_SOFT_CON_SEL				BIT(2)
+
+#define UOC_CON3					0x0c
+/* bits present on rk3188 and rk3288 phys */
+#define UOC_CON3_UTMI_TERMSEL_FULLSPEED			BIT(5)
+#define UOC_CON3_UTMI_XCVRSEELCT_FSTRANSC		(1 << 3)
+#define UOC_CON3_UTMI_XCVRSEELCT_MASK			(3 << 3)
+#define UOC_CON3_UTMI_OPMODE_NODRIVING			(1 << 1)
+#define UOC_CON3_UTMI_OPMODE_MASK			(3 << 1)
+#define UOC_CON3_UTMI_SUSPENDN				BIT(0)
 
 struct rockchip_usb_phys {
 	int reg;
@@ -46,7 +61,8 @@ struct rockchip_usb_phys {
 struct rockchip_usb_phy_base;
 struct rockchip_usb_phy_pdata {
 	struct rockchip_usb_phys *phys;
-	int (*init_usb_uart)(struct regmap *grf);
+	int (*init_usb_uart)(struct regmap *grf,
+			     const struct rockchip_usb_phy_pdata *pdata);
 	int usb_uart_phy;
 };
 
@@ -313,28 +329,88 @@ static const struct rockchip_usb_phy_pdata rk3066a_pdata = {
 	},
 };
 
+static int __init rockchip_init_usb_uart_common(struct regmap *grf,
+				const struct rockchip_usb_phy_pdata *pdata)
+{
+	int regoffs = pdata->phys[pdata->usb_uart_phy].reg;
+	int ret;
+	u32 val;
+
+	/*
+	 * COMMON_ON and DISABLE settings are described in the TRM,
+	 * but were not present in the original code.
+	 * Also disable the analog phy components to save power.
+	 */
+	val = HIWORD_UPDATE(UOC_CON0_COMMON_ON_N
+				| UOC_CON0_DISABLE
+				| UOC_CON0_SIDDQ,
+			    UOC_CON0_COMMON_ON_N
+				| UOC_CON0_DISABLE
+				| UOC_CON0_SIDDQ);
+	ret = regmap_write(grf, regoffs + UOC_CON0, val);
+	if (ret)
+		return ret;
+
+	val = HIWORD_UPDATE(UOC_CON2_SOFT_CON_SEL,
+			    UOC_CON2_SOFT_CON_SEL);
+	ret = regmap_write(grf, regoffs + UOC_CON2, val);
+	if (ret)
+		return ret;
+
+	val = HIWORD_UPDATE(UOC_CON3_UTMI_OPMODE_NODRIVING
+				| UOC_CON3_UTMI_XCVRSEELCT_FSTRANSC
+				| UOC_CON3_UTMI_TERMSEL_FULLSPEED,
+			    UOC_CON3_UTMI_SUSPENDN
+				| UOC_CON3_UTMI_OPMODE_MASK
+				| UOC_CON3_UTMI_XCVRSEELCT_MASK
+				| UOC_CON3_UTMI_TERMSEL_FULLSPEED);
+	ret = regmap_write(grf, UOC_CON3, val);
+	if (ret)
+		return ret;
+
+	return 0;
+}
+
+#define RK3188_UOC0_CON0				0x10c
+#define RK3188_UOC0_CON0_BYPASSSEL			BIT(9)
+#define RK3188_UOC0_CON0_BYPASSDMEN			BIT(8)
+
+/*
+ * Enable the bypass of uart2 data through the otg usb phy.
+ * See description of rk3288-variant for details.
+ */
+static int __init rk3188_init_usb_uart(struct regmap *grf,
+				const struct rockchip_usb_phy_pdata *pdata)
+{
+	u32 val;
+	int ret;
+
+	ret = rockchip_init_usb_uart_common(grf, pdata);
+	if (ret)
+		return ret;
+
+	val = HIWORD_UPDATE(RK3188_UOC0_CON0_BYPASSSEL
+				| RK3188_UOC0_CON0_BYPASSDMEN,
+			    RK3188_UOC0_CON0_BYPASSSEL
+				| RK3188_UOC0_CON0_BYPASSDMEN);
+	ret = regmap_write(grf, RK3188_UOC0_CON0, val);
+	if (ret)
+		return ret;
+
+	return 0;
+}
+
 static const struct rockchip_usb_phy_pdata rk3188_pdata = {
 	.phys = (struct rockchip_usb_phys[]){
 		{ .reg = 0x10c, .pll_name = "sclk_otgphy0_480m" },
 		{ .reg = 0x11c, .pll_name = "sclk_otgphy1_480m" },
 		{ /* sentinel */ }
 	},
+	.init_usb_uart = rk3188_init_usb_uart,
+	.usb_uart_phy = 0,
 };
 
-#define RK3288_UOC0_CON0				0x320
-#define RK3288_UOC0_CON0_COMMON_ON_N			BIT(0)
-#define RK3288_UOC0_CON0_DISABLE			BIT(4)
-
-#define RK3288_UOC0_CON2				0x328
-#define RK3288_UOC0_CON2_SOFT_CON_SEL			BIT(2)
-
 #define RK3288_UOC0_CON3				0x32c
-#define RK3288_UOC0_CON3_UTMI_SUSPENDN			BIT(0)
-#define RK3288_UOC0_CON3_UTMI_OPMODE_NODRIVING		(1 << 1)
-#define RK3288_UOC0_CON3_UTMI_OPMODE_MASK		(3 << 1)
-#define RK3288_UOC0_CON3_UTMI_XCVRSEELCT_FSTRANSC	(1 << 3)
-#define RK3288_UOC0_CON3_UTMI_XCVRSEELCT_MASK		(3 << 3)
-#define RK3288_UOC0_CON3_UTMI_TERMSEL_FULLSPEED		BIT(5)
 #define RK3288_UOC0_CON3_BYPASSDMEN			BIT(6)
 #define RK3288_UOC0_CON3_BYPASSSEL			BIT(7)
 
@@ -353,40 +429,13 @@ static const struct rockchip_usb_phy_pdata rk3188_pdata = {
  *
  * The actual code in the vendor kernel does some things differently.
  */
-static int __init rk3288_init_usb_uart(struct regmap *grf)
+static int __init rk3288_init_usb_uart(struct regmap *grf,
+				const struct rockchip_usb_phy_pdata *pdata)
 {
 	u32 val;
 	int ret;
 
-	/*
-	 * COMMON_ON and DISABLE settings are described in the TRM,
-	 * but were not present in the original code.
-	 * Also disable the analog phy components to save power.
-	 */
-	val = HIWORD_UPDATE(RK3288_UOC0_CON0_COMMON_ON_N
-				| RK3288_UOC0_CON0_DISABLE
-				| UOC_CON0_SIDDQ,
-			    RK3288_UOC0_CON0_COMMON_ON_N
-				| RK3288_UOC0_CON0_DISABLE
-				| UOC_CON0_SIDDQ);
-	ret = regmap_write(grf, RK3288_UOC0_CON0, val);
-	if (ret)
-		return ret;
-
-	val = HIWORD_UPDATE(RK3288_UOC0_CON2_SOFT_CON_SEL,
-			    RK3288_UOC0_CON2_SOFT_CON_SEL);
-	ret = regmap_write(grf, RK3288_UOC0_CON2, val);
-	if (ret)
-		return ret;
-
-	val = HIWORD_UPDATE(RK3288_UOC0_CON3_UTMI_OPMODE_NODRIVING
-				| RK3288_UOC0_CON3_UTMI_XCVRSEELCT_FSTRANSC
-				| RK3288_UOC0_CON3_UTMI_TERMSEL_FULLSPEED,
-			    RK3288_UOC0_CON3_UTMI_SUSPENDN
-				| RK3288_UOC0_CON3_UTMI_OPMODE_MASK
-				| RK3288_UOC0_CON3_UTMI_XCVRSEELCT_MASK
-				| RK3288_UOC0_CON3_UTMI_TERMSEL_FULLSPEED);
-	ret = regmap_write(grf, RK3288_UOC0_CON3, val);
+	ret = rockchip_init_usb_uart_common(grf, pdata);
 	if (ret)
 		return ret;
 
@@ -516,7 +565,7 @@ static int __init rockchip_init_usb_uart(void)
 		return PTR_ERR(grf);
 	}
 
-	ret = data->init_usb_uart(grf);
+	ret = data->init_usb_uart(grf, data);
 	if (ret) {
 		pr_err("%s: could not init usb_uart, %d\n", __func__, ret);
 		enable_usb_uart = 0;