Merge branch 'pci/errors'

- Add PCI_ERROR_RESPONSE and related definitions for signaling and checking
  for transaction errors on PCI (Naveen Naidu)

- Fabricate PCI_ERROR_RESPONSE data (~0) in config read wrappers, instead
  of in host controller drivers, when transactions fail on PCI (Naveen
  Naidu)

- Use PCI_POSSIBLE_ERROR() to check for possible failure of config reads
  (Naveen Naidu)

* pci/errors:
  PCI: xgene: Use PCI_ERROR_RESPONSE to identify config read errors
  PCI: hv: Use PCI_ERROR_RESPONSE to identify config read errors
  PCI: keystone: Use PCI_ERROR_RESPONSE to identify config read errors
  PCI: Use PCI_ERROR_RESPONSE to identify config read errors
  PCI: cpqphp: Use PCI_POSSIBLE_ERROR() to check config reads
  PCI/PME: Use PCI_POSSIBLE_ERROR() to check config reads
  PCI/DPC: Use PCI_POSSIBLE_ERROR() to check config reads
  PCI: pciehp: Use PCI_POSSIBLE_ERROR() to check config reads
  PCI: vmd: Use PCI_POSSIBLE_ERROR() to check config reads
  PCI/ERR: Use PCI_POSSIBLE_ERROR() to check config reads
  PCI: rockchip-host: Drop error data fabrication when config read fails
  PCI: rcar-host: Drop error data fabrication when config read fails
  PCI: altera: Drop error data fabrication when config read fails
  PCI: mvebu: Drop error data fabrication when config read fails
  PCI: aardvark: Drop error data fabrication when config read fails
  PCI: kirin: Drop error data fabrication when config read fails
  PCI: histb: Drop error data fabrication when config read fails
  PCI: exynos: Drop error data fabrication when config read fails
  PCI: mediatek: Drop error data fabrication when config read fails
  PCI: iproc: Drop error data fabrication when config read fails
  PCI: thunder: Drop error data fabrication when config read fails
  PCI: Drop error data fabrication when config read fails
  PCI: Use PCI_SET_ERROR_RESPONSE() for disconnected devices
  PCI: Set error response data when config read fails
  PCI: Add PCI_ERROR_RESPONSE and related definitions

23 files changed, 79 insertions, 120 deletions

diff --git a/drivers/pci/access.c b/drivers/pci/access.c
index 46935695cfb9..0d9f6b21babb 100644
--- a/drivers/pci/access.c
+++ b/drivers/pci/access.c
@@ -42,7 +42,10 @@ int noinline pci_bus_read_config_##size \
 	if (PCI_##size##_BAD) return PCIBIOS_BAD_REGISTER_NUMBER;	\
 	pci_lock_config(flags);						\
 	res = bus->ops->read(bus, devfn, pos, len, &data);		\
-	*value = (type)data;						\
+	if (res)							\
+		PCI_SET_ERROR_RESPONSE(value);				\
+	else								\
+		*value = (type)data;					\
 	pci_unlock_config(flags);					\
 	return res;							\
 }
@@ -80,10 +83,8 @@ int pci_generic_config_read(struct pci_bus *bus, unsigned int devfn,
 	void __iomem *addr;
 
 	addr = bus->ops->map_bus(bus, devfn, where);
-	if (!addr) {
-		*val = ~0;
+	if (!addr)
 		return PCIBIOS_DEVICE_NOT_FOUND;
-	}
 
 	if (size == 1)
 		*val = readb(addr);
@@ -122,10 +123,8 @@ int pci_generic_config_read32(struct pci_bus *bus, unsigned int devfn,
 	void __iomem *addr;
 
 	addr = bus->ops->map_bus(bus, devfn, where & ~0x3);
-	if (!addr) {
-		*val = ~0;
+	if (!addr)
 		return PCIBIOS_DEVICE_NOT_FOUND;
-	}
 
 	*val = readl(addr);
 
@@ -228,7 +227,10 @@ int pci_user_read_config_##size						\
 	ret = dev->bus->ops->read(dev->bus, dev->devfn,			\
 					pos, sizeof(type), &data);	\
 	raw_spin_unlock_irq(&pci_lock);				\
-	*val = (type)data;						\
+	if (ret)							\
+		PCI_SET_ERROR_RESPONSE(val);				\
+	else								\
+		*val = (type)data;					\
 	return pcibios_err_to_errno(ret);				\
 }									\
 EXPORT_SYMBOL_GPL(pci_user_read_config_##size);
@@ -410,9 +412,9 @@ int pcie_capability_read_word(struct pci_dev *dev, int pos, u16 *val)
 	if (pcie_capability_reg_implemented(dev, pos)) {
 		ret = pci_read_config_word(dev, pci_pcie_cap(dev) + pos, val);
 		/*
-		 * Reset *val to 0 if pci_read_config_word() fails, it may
-		 * have been written as 0xFFFF if hardware error happens
-		 * during pci_read_config_word().
+		 * Reset *val to 0 if pci_read_config_word() fails; it may
+		 * have been written as 0xFFFF (PCI_ERROR_RESPONSE) if the
+		 * config read failed on PCI.
 		 */
 		if (ret)
 			*val = 0;
@@ -445,9 +447,9 @@ int pcie_capability_read_dword(struct pci_dev *dev, int pos, u32 *val)
 	if (pcie_capability_reg_implemented(dev, pos)) {
 		ret = pci_read_config_dword(dev, pci_pcie_cap(dev) + pos, val);
 		/*
-		 * Reset *val to 0 if pci_read_config_dword() fails, it may
-		 * have been written as 0xFFFFFFFF if hardware error happens
-		 * during pci_read_config_dword().
+		 * Reset *val to 0 if pci_read_config_dword() fails; it may
+		 * have been written as 0xFFFFFFFF (PCI_ERROR_RESPONSE) if
+		 * the config read failed on PCI.
 		 */
 		if (ret)
 			*val = 0;
@@ -523,7 +525,7 @@ EXPORT_SYMBOL(pcie_capability_clear_and_set_dword);
 int pci_read_config_byte(const struct pci_dev *dev, int where, u8 *val)
 {
 	if (pci_dev_is_disconnected(dev)) {
-		*val = ~0;
+		PCI_SET_ERROR_RESPONSE(val);
 		return PCIBIOS_DEVICE_NOT_FOUND;
 	}
 	return pci_bus_read_config_byte(dev->bus, dev->devfn, where, val);
@@ -533,7 +535,7 @@ EXPORT_SYMBOL(pci_read_config_byte);
 int pci_read_config_word(const struct pci_dev *dev, int where, u16 *val)
 {
 	if (pci_dev_is_disconnected(dev)) {
-		*val = ~0;
+		PCI_SET_ERROR_RESPONSE(val);
 		return PCIBIOS_DEVICE_NOT_FOUND;
 	}
 	return pci_bus_read_config_word(dev->bus, dev->devfn, where, val);
@@ -544,7 +546,7 @@ int pci_read_config_dword(const struct pci_dev *dev, int where,
 					u32 *val)
 {
 	if (pci_dev_is_disconnected(dev)) {
-		*val = ~0;
+		PCI_SET_ERROR_RESPONSE(val);
 		return PCIBIOS_DEVICE_NOT_FOUND;
 	}
 	return pci_bus_read_config_dword(dev->bus, dev->devfn, where, val);
diff --git a/drivers/pci/controller/dwc/pci-exynos.c b/drivers/pci/controller/dwc/pci-exynos.c
index c24dab383654..f9526d6de160 100644
--- a/drivers/pci/controller/dwc/pci-exynos.c
+++ b/drivers/pci/controller/dwc/pci-exynos.c
@@ -216,10 +216,8 @@ static int exynos_pcie_rd_own_conf(struct pci_bus *bus, unsigned int devfn,
 {
 	struct dw_pcie *pci = to_dw_pcie_from_pp(bus->sysdata);
 
-	if (PCI_SLOT(devfn)) {
-		*val = ~0;
+	if (PCI_SLOT(devfn))
 		return PCIBIOS_DEVICE_NOT_FOUND;
-	}
 
 	*val = dw_pcie_read_dbi(pci, where, size);
 	return PCIBIOS_SUCCESSFUL;
diff --git a/drivers/pci/controller/dwc/pci-keystone.c b/drivers/pci/controller/dwc/pci-keystone.c
index 13f03a97714c..6ab83b21ad06 100644
--- a/drivers/pci/controller/dwc/pci-keystone.c
+++ b/drivers/pci/controller/dwc/pci-keystone.c
@@ -747,9 +747,9 @@ err:
 
 #ifdef CONFIG_ARM
 /*
- * When a PCI device does not exist during config cycles, keystone host gets a
- * bus error instead of returning 0xffffffff. This handler always returns 0
- * for this kind of faults.
+ * When a PCI device does not exist during config cycles, keystone host
+ * gets a bus error instead of returning 0xffffffff (PCI_ERROR_RESPONSE).
+ * This handler always returns 0 for this kind of fault.
  */
 static int ks_pcie_fault(unsigned long addr, unsigned int fsr,
 			 struct pt_regs *regs)
diff --git a/drivers/pci/controller/dwc/pcie-histb.c b/drivers/pci/controller/dwc/pcie-histb.c
index 86f9d16c50d7..410555dccb6d 100644
--- a/drivers/pci/controller/dwc/pcie-histb.c
+++ b/drivers/pci/controller/dwc/pcie-histb.c
@@ -127,10 +127,8 @@ static int histb_pcie_rd_own_conf(struct pci_bus *bus, unsigned int devfn,
 {
 	struct dw_pcie *pci = to_dw_pcie_from_pp(bus->sysdata);
 
-	if (PCI_SLOT(devfn)) {
-		*val = ~0;
+	if (PCI_SLOT(devfn))
 		return PCIBIOS_DEVICE_NOT_FOUND;
-	}
 
 	*val = dw_pcie_read_dbi(pci, where, size);
 	return PCIBIOS_SUCCESSFUL;
diff --git a/drivers/pci/controller/dwc/pcie-kirin.c b/drivers/pci/controller/dwc/pcie-kirin.c
index 095afbccf9c1..e6dcac79c02a 100644
--- a/drivers/pci/controller/dwc/pcie-kirin.c
+++ b/drivers/pci/controller/dwc/pcie-kirin.c
@@ -530,10 +530,8 @@ static int kirin_pcie_rd_own_conf(struct pci_bus *bus, unsigned int devfn,
 {
 	struct dw_pcie *pci = to_dw_pcie_from_pp(bus->sysdata);
 
-	if (PCI_SLOT(devfn)) {
-		*val = ~0;
+	if (PCI_SLOT(devfn))
 		return PCIBIOS_DEVICE_NOT_FOUND;
-	}
 
 	*val = dw_pcie_read_dbi(pci, where, size);
 	return PCIBIOS_SUCCESSFUL;
diff --git a/drivers/pci/controller/pci-aardvark.c b/drivers/pci/controller/pci-aardvark.c
index a3987e717258..ec0df426863d 100644
--- a/drivers/pci/controller/pci-aardvark.c
+++ b/drivers/pci/controller/pci-aardvark.c
@@ -1037,10 +1037,8 @@ static int advk_pcie_rd_conf(struct pci_bus *bus, u32 devfn,
 	u32 reg;
 	int ret;
 
-	if (!advk_pcie_valid_device(pcie, bus, devfn)) {
-		*val = 0xffffffff;
+	if (!advk_pcie_valid_device(pcie, bus, devfn))
 		return PCIBIOS_DEVICE_NOT_FOUND;
-	}
 
 	if (pci_is_root_bus(bus))
 		return pci_bridge_emul_conf_read(&pcie->bridge, where,
diff --git a/drivers/pci/controller/pci-hyperv.c b/drivers/pci/controller/pci-hyperv.c
index 31743f93199e..154bb8b20e54 100644
--- a/drivers/pci/controller/pci-hyperv.c
+++ b/drivers/pci/controller/pci-hyperv.c
@@ -2030,7 +2030,7 @@ static void prepopulate_bars(struct hv_pcibus_device *hbus)
 	 * If the memory enable bit is already set, Hyper-V silently ignores
 	 * the below BAR updates, and the related PCI device driver can not
 	 * work, because reading from the device register(s) always returns
-	 * 0xFFFFFFFF.
+	 * 0xFFFFFFFF (PCI_ERROR_RESPONSE).
 	 */
 	list_for_each_entry(hpdev, &hbus->children, list_entry) {
 		_hv_pcifront_read_config(hpdev, PCI_COMMAND, 2, &command);
diff --git a/drivers/pci/controller/pci-mvebu.c b/drivers/pci/controller/pci-mvebu.c
index 4f2508dc1ed2..71258ea3d35f 100644
--- a/drivers/pci/controller/pci-mvebu.c
+++ b/drivers/pci/controller/pci-mvebu.c
@@ -814,20 +814,16 @@ static int mvebu_pcie_rd_conf(struct pci_bus *bus, u32 devfn, int where,
 	int ret;
 
 	port = mvebu_pcie_find_port(pcie, bus, devfn);
-	if (!port) {
-		*val = 0xffffffff;
+	if (!port)
 		return PCIBIOS_DEVICE_NOT_FOUND;
-	}
 
 	/* Access the emulated PCI-to-PCI bridge */
 	if (bus->number == 0)
 		return pci_bridge_emul_conf_read(&port->bridge, where,
 						 size, val);
 
-	if (!mvebu_pcie_link_up(port)) {
-		*val = 0xffffffff;
+	if (!mvebu_pcie_link_up(port))
 		return PCIBIOS_DEVICE_NOT_FOUND;
-	}
 
 	/* Access the real PCIe interface */
 	ret = mvebu_pcie_hw_rd_conf(port, bus, devfn,
diff --git a/drivers/pci/controller/pci-thunder-ecam.c b/drivers/pci/controller/pci-thunder-ecam.c
index e9d5ca245f5e..b5bd10a62adb 100644
--- a/drivers/pci/controller/pci-thunder-ecam.c
+++ b/drivers/pci/controller/pci-thunder-ecam.c
@@ -41,10 +41,9 @@ static int handle_ea_bar(u32 e0, int bar, struct pci_bus *bus,
 	}
 	if (where_a == 0x4) {
 		addr = bus->ops->map_bus(bus, devfn, bar); /* BAR 0 */
-		if (!addr) {
-			*val = ~0;
+		if (!addr)
 			return PCIBIOS_DEVICE_NOT_FOUND;
-		}
+
 		v = readl(addr);
 		v &= ~0xf;
 		v |= 2; /* EA entry-1. Base-L */
@@ -56,10 +55,9 @@ static int handle_ea_bar(u32 e0, int bar, struct pci_bus *bus,
 		u32 barl_rb;
 
 		addr = bus->ops->map_bus(bus, devfn, bar); /* BAR 0 */
-		if (!addr) {
-			*val = ~0;
+		if (!addr)
 			return PCIBIOS_DEVICE_NOT_FOUND;
-		}
+
 		barl_orig = readl(addr + 0);
 		writel(0xffffffff, addr + 0);
 		barl_rb = readl(addr + 0);
@@ -72,10 +70,9 @@ static int handle_ea_bar(u32 e0, int bar, struct pci_bus *bus,
 	}
 	if (where_a == 0xc) {
 		addr = bus->ops->map_bus(bus, devfn, bar + 4); /* BAR 1 */
-		if (!addr) {
-			*val = ~0;
+		if (!addr)
 			return PCIBIOS_DEVICE_NOT_FOUND;
-		}
+
 		v = readl(addr); /* EA entry-3. Base-H */
 		set_val(v, where, size, val);
 		return PCIBIOS_SUCCESSFUL;
@@ -104,10 +101,8 @@ static int thunder_ecam_p2_config_read(struct pci_bus *bus, unsigned int devfn,
 	}
 
 	addr = bus->ops->map_bus(bus, devfn, where_a);
-	if (!addr) {
-		*val = ~0;
+	if (!addr)
 		return PCIBIOS_DEVICE_NOT_FOUND;
-	}
 
 	v = readl(addr);
 
@@ -135,10 +130,8 @@ static int thunder_ecam_config_read(struct pci_bus *bus, unsigned int devfn,
 	int where_a = where & ~3;
 
 	addr = bus->ops->map_bus(bus, devfn, 0xc);
-	if (!addr) {
-		*val = ~0;
+	if (!addr)
 		return PCIBIOS_DEVICE_NOT_FOUND;
-	}
 
 	v = readl(addr);
 
@@ -146,10 +139,8 @@ static int thunder_ecam_config_read(struct pci_bus *bus, unsigned int devfn,
 	cfg_type = (v >> 16) & 0x7f;
 
 	addr = bus->ops->map_bus(bus, devfn, 8);
-	if (!addr) {
-		*val = ~0;
+	if (!addr)
 		return PCIBIOS_DEVICE_NOT_FOUND;
-	}
 
 	class_rev = readl(addr);
 	if (class_rev == 0xffffffff)
@@ -176,10 +167,8 @@ static int thunder_ecam_config_read(struct pci_bus *bus, unsigned int devfn,
 	}
 
 	addr = bus->ops->map_bus(bus, devfn, 0);
-	if (!addr) {
-		*val = ~0;
+	if (!addr)
 		return PCIBIOS_DEVICE_NOT_FOUND;
-	}
 
 	vendor_device = readl(addr);
 	if (vendor_device == 0xffffffff)
@@ -196,10 +185,9 @@ static int thunder_ecam_config_read(struct pci_bus *bus, unsigned int devfn,
 		bool is_tns = (vendor_device == 0xa01f177d);
 
 		addr = bus->ops->map_bus(bus, devfn, 0x70);
-		if (!addr) {
-			*val = ~0;
+		if (!addr)
 			return PCIBIOS_DEVICE_NOT_FOUND;
-		}
+
 		/* E_CAP */
 		v = readl(addr);
 		has_msix = (v & 0xff00) != 0;
@@ -211,10 +199,9 @@ static int thunder_ecam_config_read(struct pci_bus *bus, unsigned int devfn,
 		}
 		if (where_a == 0xb0) {
 			addr = bus->ops->map_bus(bus, devfn, where_a);
-			if (!addr) {
-				*val = ~0;
+			if (!addr)
 				return PCIBIOS_DEVICE_NOT_FOUND;
-			}
+
 			v = readl(addr);
 			if (v & 0xff00)
 				pr_err("Bad MSIX cap header: %08x\n", v);
@@ -268,10 +255,9 @@ static int thunder_ecam_config_read(struct pci_bus *bus, unsigned int devfn,
 
 		if (where_a == 0x70) {
 			addr = bus->ops->map_bus(bus, devfn, where_a);
-			if (!addr) {
-				*val = ~0;
+			if (!addr)
 				return PCIBIOS_DEVICE_NOT_FOUND;
-			}
+
 			v = readl(addr);
 			if (v & 0xff00)
 				pr_err("Bad PCIe cap header: %08x\n", v);
diff --git a/drivers/pci/controller/pci-thunder-pem.c b/drivers/pci/controller/pci-thunder-pem.c
index 0660b9da204f..06a9855cb431 100644
--- a/drivers/pci/controller/pci-thunder-pem.c
+++ b/drivers/pci/controller/pci-thunder-pem.c
@@ -41,10 +41,8 @@ static int thunder_pem_bridge_read(struct pci_bus *bus, unsigned int devfn,
 	struct pci_config_window *cfg = bus->sysdata;
 	struct thunder_pem_pci *pem_pci = (struct thunder_pem_pci *)cfg->priv;
 
-	if (devfn != 0 || where >= 2048) {
-		*val = ~0;
+	if (devfn != 0 || where >= 2048)
 		return PCIBIOS_DEVICE_NOT_FOUND;
-	}
 
 	/*
 	 * 32-bit accesses only.  Write the address to the low order
diff --git a/drivers/pci/controller/pci-xgene.c b/drivers/pci/controller/pci-xgene.c
index d83dbd977418..bd85f2c85cc7 100644
--- a/drivers/pci/controller/pci-xgene.c
+++ b/drivers/pci/controller/pci-xgene.c
@@ -171,11 +171,11 @@ static int xgene_pcie_config_read32(struct pci_bus *bus, unsigned int devfn,
 		return PCIBIOS_DEVICE_NOT_FOUND;
 
 	/*
-	 * The v1 controller has a bug in its Configuration Request
-	 * Retry Status (CRS) logic: when CRS Software Visibility is
-	 * enabled and we read the Vendor and Device ID of a non-existent
-	 * device, the controller fabricates return data of 0xFFFF0001
-	 * ("device exists but is not ready") instead of 0xFFFFFFFF
+	 * The v1 controller has a bug in its Configuration Request Retry
+	 * Status (CRS) logic: when CRS Software Visibility is enabled and
+	 * we read the Vendor and Device ID of a non-existent device, the
+	 * controller fabricates return data of 0xFFFF0001 ("device exists
+	 * but is not ready") instead of 0xFFFFFFFF (PCI_ERROR_RESPONSE)
 	 * ("device does not exist").  This causes the PCI core to retry
 	 * the read until it times out.  Avoid this by not claiming to
 	 * support CRS SV.
diff --git a/drivers/pci/controller/pcie-altera.c b/drivers/pci/controller/pcie-altera.c
index 2513e9363236..a6bdf9aff833 100644
--- a/drivers/pci/controller/pcie-altera.c
+++ b/drivers/pci/controller/pcie-altera.c
@@ -510,10 +510,8 @@ static int altera_pcie_cfg_read(struct pci_bus *bus, unsigned int devfn,
 	if (altera_pcie_hide_rc_bar(bus, devfn, where))
 		return PCIBIOS_BAD_REGISTER_NUMBER;
 
-	if (!altera_pcie_valid_device(pcie, bus, PCI_SLOT(devfn))) {
-		*value = 0xffffffff;
+	if (!altera_pcie_valid_device(pcie, bus, PCI_SLOT(devfn)))
 		return PCIBIOS_DEVICE_NOT_FOUND;
-	}
 
 	return _altera_pcie_cfg_read(pcie, bus->number, devfn, where, size,
 				     value);
diff --git a/drivers/pci/controller/pcie-iproc.c b/drivers/pci/controller/pcie-iproc.c
index 36b9d2c46cfa..b3e75bc61ff1 100644
--- a/drivers/pci/controller/pcie-iproc.c
+++ b/drivers/pci/controller/pcie-iproc.c
@@ -659,10 +659,8 @@ static int iproc_pci_raw_config_read32(struct iproc_pcie *pcie,
 	void __iomem *addr;
 
 	addr = iproc_pcie_map_cfg_bus(pcie, 0, devfn, where & ~0x3);
-	if (!addr) {
-		*val = ~0;
+	if (!addr)
 		return PCIBIOS_DEVICE_NOT_FOUND;
-	}
 
 	*val = readl(addr);
 
diff --git a/drivers/pci/controller/pcie-mediatek.c b/drivers/pci/controller/pcie-mediatek.c
index b18935e8da89..ddfbd4aebdec 100644
--- a/drivers/pci/controller/pcie-mediatek.c
+++ b/drivers/pci/controller/pcie-mediatek.c
@@ -365,19 +365,12 @@ static int mtk_pcie_config_read(struct pci_bus *bus, unsigned int devfn,
 {
 	struct mtk_pcie_port *port;
 	u32 bn = bus->number;
-	int ret;
 
 	port = mtk_pcie_find_port(bus, devfn);
-	if (!port) {
-		*val = ~0;
+	if (!port)
 		return PCIBIOS_DEVICE_NOT_FOUND;
-	}
-
-	ret = mtk_pcie_hw_rd_cfg(port, bn, devfn, where, size, val);
-	if (ret)
-		*val = ~0;
 
-	return ret;
+	return mtk_pcie_hw_rd_cfg(port, bn, devfn, where, size, val);
 }
 
 static int mtk_pcie_config_write(struct pci_bus *bus, unsigned int devfn,
diff --git a/drivers/pci/controller/pcie-rcar-host.c b/drivers/pci/controller/pcie-rcar-host.c
index 780e60159993..38b6e02edfa9 100644
--- a/drivers/pci/controller/pcie-rcar-host.c
+++ b/drivers/pci/controller/pcie-rcar-host.c
@@ -159,10 +159,8 @@ static int rcar_pcie_read_conf(struct pci_bus *bus, unsigned int devfn,
 
 	ret = rcar_pcie_config_access(host, RCAR_PCI_ACCESS_READ,
 				      bus, devfn, where, val);
-	if (ret != PCIBIOS_SUCCESSFUL) {
-		*val = 0xffffffff;
+	if (ret != PCIBIOS_SUCCESSFUL)
 		return ret;
-	}
 
 	if (size == 1)
 		*val = (*val >> (BITS_PER_BYTE * (where & 3))) & 0xff;
diff --git a/drivers/pci/controller/pcie-rockchip-host.c b/drivers/pci/controller/pcie-rockchip-host.c
index c52316d0bfd2..45a28880f322 100644
--- a/drivers/pci/controller/pcie-rockchip-host.c
+++ b/drivers/pci/controller/pcie-rockchip-host.c
@@ -221,10 +221,8 @@ static int rockchip_pcie_rd_conf(struct pci_bus *bus, u32 devfn, int where,
 {
 	struct rockchip_pcie *rockchip = bus->sysdata;
 
-	if (!rockchip_pcie_valid_device(rockchip, bus, PCI_SLOT(devfn))) {
-		*val = 0xffffffff;
+	if (!rockchip_pcie_valid_device(rockchip, bus, PCI_SLOT(devfn)))
 		return PCIBIOS_DEVICE_NOT_FOUND;
-	}
 
 	if (pci_is_root_bus(bus))
 		return rockchip_pcie_rd_own_conf(rockchip, where, size, val);
diff --git a/drivers/pci/controller/vmd.c b/drivers/pci/controller/vmd.c
index 20e01e5cf2d7..cc166c683638 100644
--- a/drivers/pci/controller/vmd.c
+++ b/drivers/pci/controller/vmd.c
@@ -575,7 +575,7 @@ static int vmd_get_phys_offsets(struct vmd_dev *vmd, bool native_hint,
 		int ret;
 
 		ret = pci_read_config_dword(dev, PCI_REG_VMLOCK, &vmlock);
-		if (ret || vmlock == ~0)
+		if (ret || PCI_POSSIBLE_ERROR(vmlock))
 			return -ENODEV;
 
 		if (MB2_SHADOW_EN(vmlock)) {
diff --git a/drivers/pci/hotplug/cpqphp_ctrl.c b/drivers/pci/hotplug/cpqphp_ctrl.c
index ed7b58eb64d2..93fd2a621822 100644
--- a/drivers/pci/hotplug/cpqphp_ctrl.c
+++ b/drivers/pci/hotplug/cpqphp_ctrl.c
@@ -2273,7 +2273,7 @@ static u32 configure_new_device(struct controller  *ctrl, struct pci_func  *func
 		while ((function < max_functions) && (!stop_it)) {
 			pci_bus_read_config_dword(ctrl->pci_bus, PCI_DEVFN(func->device, function), 0x00, &ID);
 
-			if (ID == 0xFFFFFFFF) {
+			if (PCI_POSSIBLE_ERROR(ID)) {
 				function++;
 			} else {
 				/* Setup slot structure. */
@@ -2517,7 +2517,7 @@ static int configure_new_function(struct controller *ctrl, struct pci_func *func
 			pci_bus_read_config_dword(pci_bus, PCI_DEVFN(device, 0), 0x00, &ID);
 			pci_bus->number = func->bus;
 
-			if (ID != 0xFFFFFFFF) {	  /*  device present */
+			if (!PCI_POSSIBLE_ERROR(ID)) {	  /*  device present */
 				/* Setup slot structure. */
 				new_slot = cpqhp_slot_create(hold_bus_node->base);
 
diff --git a/drivers/pci/hotplug/pciehp_hpc.c b/drivers/pci/hotplug/pciehp_hpc.c
index 1d3108e6c128..1c1ebf3dad43 100644
--- a/drivers/pci/hotplug/pciehp_hpc.c
+++ b/drivers/pci/hotplug/pciehp_hpc.c
@@ -89,7 +89,7 @@ static int pcie_poll_cmd(struct controller *ctrl, int timeout)
 
 	do {
 		pcie_capability_read_word(pdev, PCI_EXP_SLTSTA, &slot_status);
-		if (slot_status == (u16) ~0) {
+		if (PCI_POSSIBLE_ERROR(slot_status)) {
 			ctrl_info(ctrl, "%s: no response from device\n",
 				  __func__);
 			return 0;
@@ -165,7 +165,7 @@ static void pcie_do_write_cmd(struct controller *ctrl, u16 cmd,
 	pcie_wait_cmd(ctrl);
 
 	pcie_capability_read_word(pdev, PCI_EXP_SLTCTL, &slot_ctrl);
-	if (slot_ctrl == (u16) ~0) {
+	if (PCI_POSSIBLE_ERROR(slot_ctrl)) {
 		ctrl_info(ctrl, "%s: no response from device\n", __func__);
 		goto out;
 	}
@@ -236,7 +236,7 @@ int pciehp_check_link_active(struct controller *ctrl)
 	int ret;
 
 	ret = pcie_capability_read_word(pdev, PCI_EXP_LNKSTA, &lnk_status);
-	if (ret == PCIBIOS_DEVICE_NOT_FOUND || lnk_status == (u16)~0)
+	if (ret == PCIBIOS_DEVICE_NOT_FOUND || PCI_POSSIBLE_ERROR(lnk_status))
 		return -ENODEV;
 
 	ret = !!(lnk_status & PCI_EXP_LNKSTA_DLLLA);
@@ -443,7 +443,7 @@ int pciehp_card_present(struct controller *ctrl)
 	int ret;
 
 	ret = pcie_capability_read_word(pdev, PCI_EXP_SLTSTA, &slot_status);
-	if (ret == PCIBIOS_DEVICE_NOT_FOUND || slot_status == (u16)~0)
+	if (ret == PCIBIOS_DEVICE_NOT_FOUND || PCI_POSSIBLE_ERROR(slot_status))
 		return -ENODEV;
 
 	return !!(slot_status & PCI_EXP_SLTSTA_PDS);
@@ -621,7 +621,7 @@ static irqreturn_t pciehp_isr(int irq, void *dev_id)
 
 read_status:
 	pcie_capability_read_word(pdev, PCI_EXP_SLTSTA, &status);
-	if (status == (u16) ~0) {
+	if (PCI_POSSIBLE_ERROR(status)) {
 		ctrl_info(ctrl, "%s: no response from device\n", __func__);
 		if (parent)
 			pm_runtime_put(parent);
diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index 287fa40f763c..f45ea60fd6c4 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -1115,7 +1115,7 @@ static int pci_raw_set_power_state(struct pci_dev *dev, pci_power_t state)
 		return -EIO;
 
 	pci_read_config_word(dev, dev->pm_cap + PCI_PM_CTRL, &pmcsr);
-	if (pmcsr == (u16) ~0) {
+	if (PCI_POSSIBLE_ERROR(pmcsr)) {
 		pci_err(dev, "can't change power state from %s to %s (config space inaccessible)\n",
 			pci_power_name(dev->current_state),
 			pci_power_name(state));
@@ -1271,16 +1271,16 @@ static int pci_dev_wait(struct pci_dev *dev, char *reset_type, int timeout)
 	 * After reset, the device should not silently discard config
 	 * requests, but it may still indicate that it needs more time by
 	 * responding to them with CRS completions.  The Root Port will
-	 * generally synthesize ~0 data to complete the read (except when
-	 * CRS SV is enabled and the read was for the Vendor ID; in that
-	 * case it synthesizes 0x0001 data).
+	 * generally synthesize ~0 (PCI_ERROR_RESPONSE) data to complete
+	 * the read (except when CRS SV is enabled and the read was for the
+	 * Vendor ID; in that case it synthesizes 0x0001 data).
 	 *
 	 * Wait for the device to return a non-CRS completion.  Read the
 	 * Command register instead of Vendor ID so we don't have to
 	 * contend with the CRS SV value.
 	 */
 	pci_read_config_dword(dev, PCI_COMMAND, &id);
-	while (id == ~0) {
+	while (PCI_POSSIBLE_ERROR(id)) {
 		if (delay > timeout) {
 			pci_warn(dev, "not ready %dms after %s; giving up\n",
 				 delay - 1, reset_type);
diff --git a/drivers/pci/pcie/dpc.c b/drivers/pci/pcie/dpc.c
index c556e7beafe3..3e9afee02e8d 100644
--- a/drivers/pci/pcie/dpc.c
+++ b/drivers/pci/pcie/dpc.c
@@ -79,7 +79,7 @@ static bool dpc_completed(struct pci_dev *pdev)
 	u16 status;
 
 	pci_read_config_word(pdev, pdev->dpc_cap + PCI_EXP_DPC_STATUS, &status);
-	if ((status != 0xffff) && (status & PCI_EXP_DPC_STATUS_TRIGGER))
+	if ((!PCI_POSSIBLE_ERROR(status)) && (status & PCI_EXP_DPC_STATUS_TRIGGER))
 		return false;
 
 	if (test_bit(PCI_DPC_RECOVERING, &pdev->priv_flags))
@@ -312,7 +312,7 @@ static irqreturn_t dpc_irq(int irq, void *context)
 
 	pci_read_config_word(pdev, cap + PCI_EXP_DPC_STATUS, &status);
 
-	if (!(status & PCI_EXP_DPC_STATUS_INTERRUPT) || status == (u16)(~0))
+	if (!(status & PCI_EXP_DPC_STATUS_INTERRUPT) || PCI_POSSIBLE_ERROR(status))
 		return IRQ_NONE;
 
 	pci_write_config_word(pdev, cap + PCI_EXP_DPC_STATUS,
diff --git a/drivers/pci/pcie/pme.c b/drivers/pci/pcie/pme.c
index 1d0dd77fed3a..ef8ce436ead9 100644
--- a/drivers/pci/pcie/pme.c
+++ b/drivers/pci/pcie/pme.c
@@ -224,7 +224,7 @@ static void pcie_pme_work_fn(struct work_struct *work)
 			break;
 
 		pcie_capability_read_dword(port, PCI_EXP_RTSTA, &rtsta);
-		if (rtsta == (u32) ~0)
+		if (PCI_POSSIBLE_ERROR(rtsta))
 			break;
 
 		if (rtsta & PCI_EXP_RTSTA_PME) {
@@ -274,7 +274,7 @@ static irqreturn_t pcie_pme_irq(int irq, void *context)
 	spin_lock_irqsave(&data->lock, flags);
 	pcie_capability_read_dword(port, PCI_EXP_RTSTA, &rtsta);
 
-	if (rtsta == (u32) ~0 || !(rtsta & PCI_EXP_RTSTA_PME)) {
+	if (PCI_POSSIBLE_ERROR(rtsta) || !(rtsta & PCI_EXP_RTSTA_PME)) {
 		spin_unlock_irqrestore(&data->lock, flags);
 		return IRQ_NONE;
 	}
diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
index f2ba87b4fc2a..70ceb30bcad6 100644
--- a/drivers/pci/probe.c
+++ b/drivers/pci/probe.c
@@ -206,14 +206,14 @@ int __pci_read_base(struct pci_dev *dev, enum pci_bar_type type,
 	 * memory BAR or a ROM, bit 0 must be clear; if it's an io BAR, bit
 	 * 1 must be clear.
 	 */
-	if (sz == 0xffffffff)
+	if (PCI_POSSIBLE_ERROR(sz))
 		sz = 0;
 
 	/*
 	 * I don't know how l can have all bits set.  Copied from old code.
 	 * Maybe it fixes a bug on some ancient platform.
 	 */
-	if (l == 0xffffffff)
+	if (PCI_POSSIBLE_ERROR(l))
 		l = 0;
 
 	if (type == pci_bar_unknown) {
@@ -1675,7 +1675,7 @@ static int pci_cfg_space_size_ext(struct pci_dev *dev)
 
 	if (pci_read_config_dword(dev, pos, &status) != PCIBIOS_SUCCESSFUL)
 		return PCI_CFG_SPACE_SIZE;
-	if (status == 0xffffffff || pci_ext_cfg_is_aliased(dev))
+	if (PCI_POSSIBLE_ERROR(status) || pci_ext_cfg_is_aliased(dev))
 		return PCI_CFG_SPACE_SIZE;
 
 	return PCI_CFG_SPACE_EXP_SIZE;
@@ -2363,8 +2363,8 @@ bool pci_bus_generic_read_dev_vendor_id(struct pci_bus *bus, int devfn, u32 *l,
 	if (pci_bus_read_config_dword(bus, devfn, PCI_VENDOR_ID, l))
 		return false;
 
-	/* Some broken boards return 0 or ~0 if a slot is empty: */
-	if (*l == 0xffffffff || *l == 0x00000000 ||
+	/* Some broken boards return 0 or ~0 (PCI_ERROR_RESPONSE) if a slot is empty: */
+	if (PCI_POSSIBLE_ERROR(*l) || *l == 0x00000000 ||
 	    *l == 0x0000ffff || *l == 0xffff0000)
 		return false;