Merge tag 'net-next-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Jakub Kicinski:
 "Core:

   - support "prefer busy polling" NAPI operation mode, where we defer
     softirq for some time expecting applications to periodically busy
     poll

   - AF_XDP: improve efficiency by more batching and hindering the
     adjacency cache prefetcher

   - af_packet: make packet_fanout.arr size configurable up to 64K

   - tcp: optimize TCP zero copy receive in presence of partial or
     unaligned reads making zero copy a performance win for much smaller
     messages

   - XDP: add bulk APIs for returning / freeing frames

   - sched: support fragmenting IP packets as they come out of conntrack

   - net: allow virtual netdevs to forward UDP L4 and fraglist GSO skbs

  BPF:

   - BPF switch from crude rlimit-based to memcg-based memory accounting

   - BPF type format information for kernel modules and related tracing
     enhancements

   - BPF implement task local storage for BPF LSM

   - allow the FENTRY/FEXIT/RAW_TP tracing programs to use
     bpf_sk_storage

  Protocols:

   - mptcp: improve multiple xmit streams support, memory accounting and
     many smaller improvements

   - TLS: support CHACHA20-POLY1305 cipher

   - seg6: add support for SRv6 End.DT4/DT6 behavior

   - sctp: Implement RFC 6951: UDP Encapsulation of SCTP

   - ppp_generic: add ability to bridge channels directly

   - bridge: Connectivity Fault Management (CFM) support as is defined
     in IEEE 802.1Q section 12.14.

  Drivers:

   - mlx5: make use of the new auxiliary bus to organize the driver
     internals

   - mlx5: more accurate port TX timestamping support

   - mlxsw:
      - improve the efficiency of offloaded next hop updates by using
        the new nexthop object API
      - support blackhole nexthops
      - support IEEE 802.1ad (Q-in-Q) bridging

   - rtw88: major bluetooth co-existance improvements

   - iwlwifi: support new 6 GHz frequency band

   - ath11k: Fast Initial Link Setup (FILS)

   - mt7915: dual band concurrent (DBDC) support

   - net: ipa: add basic support for IPA v4.5

  Refactor:

   - a few pieces of in_interrupt() cleanup work from Sebastian Andrzej
     Siewior

   - phy: add support for shared interrupts; get rid of multiple driver
     APIs and have the drivers write a full IRQ handler, slight growth
     of driver code should be compensated by the simpler API which also
     allows shared IRQs

   - add common code for handling netdev per-cpu counters

   - move TX packet re-allocation from Ethernet switch tag drivers to a
     central place

   - improve efficiency and rename nla_strlcpy

   - number of W=1 warning cleanups as we now catch those in a patchwork
     build bot

  Old code removal:

   - wan: delete the DLCI / SDLA drivers

   - wimax: move to staging

   - wifi: remove old WDS wifi bridging support"

* tag 'net-next-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1922 commits)
  net: hns3: fix expression that is currently always true
  net: fix proc_fs init handling in af_packet and tls
  nfc: pn533: convert comma to semicolon
  af_vsock: Assign the vsock transport considering the vsock address flags
  af_vsock: Set VMADDR_FLAG_TO_HOST flag on the receive path
  vsock_addr: Check for supported flag values
  vm_sockets: Add VMADDR_FLAG_TO_HOST vsock flag
  vm_sockets: Add flags field in the vsock address data structure
  net: Disable NETIF_F_HW_TLS_TX when HW_CSUM is disabled
  tcp: Add logic to check for SYN w/ data in tcp_simple_retransmit
  net: mscc: ocelot: install MAC addresses in .ndo_set_rx_mode from process context
  nfc: s3fwrn5: Release the nfc firmware
  net: vxget: clean up sparse warnings
  mlxsw: spectrum_router: Use eXtended mezzanine to offload IPv4 router
  mlxsw: spectrum: Set KVH XLT cache mode for Spectrum2/3
  mlxsw: spectrum_router_xm: Introduce basic XM cache flushing
  mlxsw: reg: Add Router LPM Cache Enable Register
  mlxsw: reg: Add Router LPM Cache ML Delete Register
  mlxsw: spectrum_router_xm: Implement L-value tracking for M-index
  mlxsw: reg: Add XM Router M Table Register
  ...

12 files changed, 398 insertions, 106 deletions

diff --git a/drivers/nfc/nxp-nci/i2c.c b/drivers/nfc/nxp-nci/i2c.c
index 9f60e4dc5a90..7e451c10985d 100644
--- a/drivers/nfc/nxp-nci/i2c.c
+++ b/drivers/nfc/nxp-nci/i2c.c
@@ -286,7 +286,7 @@ static int nxp_nci_i2c_probe(struct i2c_client *client,
 		return PTR_ERR(phy->gpiod_en);
 	}
 
-	phy->gpiod_fw = devm_gpiod_get(dev, "firmware", GPIOD_OUT_LOW);
+	phy->gpiod_fw = devm_gpiod_get_optional(dev, "firmware", GPIOD_OUT_LOW);
 	if (IS_ERR(phy->gpiod_fw)) {
 		nfc_err(dev, "Failed to get FW gpio\n");
 		return PTR_ERR(phy->gpiod_fw);
diff --git a/drivers/nfc/pn533/usb.c b/drivers/nfc/pn533/usb.c
index 84f2983bf384..84d2bfabf42b 100644
--- a/drivers/nfc/pn533/usb.c
+++ b/drivers/nfc/pn533/usb.c
@@ -517,7 +517,7 @@ static int pn533_usb_probe(struct usb_interface *interface,
 	case PN533_DEVICE_ACR122U:
 		protocols = PN533_NO_TYPE_B_PROTOCOLS;
 		fops = &pn533_acr122_frame_ops;
-		protocol_type = PN533_PROTO_REQ_RESP,
+		protocol_type = PN533_PROTO_REQ_RESP;
 
 		rc = pn533_acr122_poweron_rdr(phy);
 		if (rc < 0) {
diff --git a/drivers/nfc/s3fwrn5/Kconfig b/drivers/nfc/s3fwrn5/Kconfig
index 3f8b6da58280..8a6b1a79de25 100644
--- a/drivers/nfc/s3fwrn5/Kconfig
+++ b/drivers/nfc/s3fwrn5/Kconfig
@@ -20,3 +20,15 @@ config NFC_S3FWRN5_I2C
 	  To compile this driver as a module, choose m here. The module will
 	  be called s3fwrn5_i2c.ko.
 	  Say N if unsure.
+
+config NFC_S3FWRN82_UART
+        tristate "Samsung S3FWRN82 UART support"
+        depends on NFC_NCI && SERIAL_DEV_BUS
+        select NFC_S3FWRN5
+        help
+          This module adds support for a UART interface to the S3FWRN82 chip.
+          Select this if your platform is using the UART bus.
+
+          To compile this driver as a module, choose m here. The module will
+          be called s3fwrn82_uart.ko.
+          Say N if unsure.
diff --git a/drivers/nfc/s3fwrn5/Makefile b/drivers/nfc/s3fwrn5/Makefile
index d0ffa35f50e8..7da827ac149c 100644
--- a/drivers/nfc/s3fwrn5/Makefile
+++ b/drivers/nfc/s3fwrn5/Makefile
@@ -3,8 +3,10 @@
 # Makefile for Samsung S3FWRN5 NFC driver
 #
 
-s3fwrn5-objs = core.o firmware.o nci.o
+s3fwrn5-objs = core.o firmware.o nci.o phy_common.o
 s3fwrn5_i2c-objs = i2c.o
+s3fwrn82_uart-objs = uart.o
 
 obj-$(CONFIG_NFC_S3FWRN5) += s3fwrn5.o
 obj-$(CONFIG_NFC_S3FWRN5_I2C) += s3fwrn5_i2c.o
+obj-$(CONFIG_NFC_S3FWRN82_UART) += s3fwrn82_uart.o
diff --git a/drivers/nfc/s3fwrn5/core.c b/drivers/nfc/s3fwrn5/core.c
index ba6c486d6465..c00b7a07c3ee 100644
--- a/drivers/nfc/s3fwrn5/core.c
+++ b/drivers/nfc/s3fwrn5/core.c
@@ -20,13 +20,26 @@
 				NFC_PROTO_ISO14443_B_MASK | \
 				NFC_PROTO_ISO15693_MASK)
 
+static int s3fwrn5_firmware_init(struct s3fwrn5_info *info)
+{
+	struct s3fwrn5_fw_info *fw_info = &info->fw_info;
+	int ret;
+
+	s3fwrn5_fw_init(fw_info, "sec_s3fwrn5_firmware.bin");
+
+	/* Get firmware data */
+	ret = s3fwrn5_fw_request_firmware(fw_info);
+	if (ret < 0)
+		dev_err(&fw_info->ndev->nfc_dev->dev,
+			"Failed to get fw file, ret=%02x\n", ret);
+	return ret;
+}
+
 static int s3fwrn5_firmware_update(struct s3fwrn5_info *info)
 {
 	bool need_update;
 	int ret;
 
-	s3fwrn5_fw_init(&info->fw_info, "sec_s3fwrn5_firmware.bin");
-
 	/* Update firmware */
 
 	s3fwrn5_set_wake(info, false);
@@ -109,6 +122,12 @@ static int s3fwrn5_nci_post_setup(struct nci_dev *ndev)
 	struct s3fwrn5_info *info = nci_get_drvdata(ndev);
 	int ret;
 
+	if (s3fwrn5_firmware_init(info)) {
+		//skip bootloader mode
+		ret = 0;
+		goto out;
+	}
+
 	ret = s3fwrn5_firmware_update(info);
 	if (ret < 0)
 		goto out;
@@ -136,7 +155,7 @@ static struct nci_ops s3fwrn5_nci_ops = {
 };
 
 int s3fwrn5_probe(struct nci_dev **ndev, void *phy_id, struct device *pdev,
-	const struct s3fwrn5_phy_ops *phy_ops, unsigned int max_payload)
+	const struct s3fwrn5_phy_ops *phy_ops)
 {
 	struct s3fwrn5_info *info;
 	int ret;
@@ -148,7 +167,6 @@ int s3fwrn5_probe(struct nci_dev **ndev, void *phy_id, struct device *pdev,
 	info->phy_id = phy_id;
 	info->pdev = pdev;
 	info->phy_ops = phy_ops;
-	info->max_payload = max_payload;
 	mutex_init(&info->mutex);
 
 	s3fwrn5_set_mode(info, S3FWRN5_MODE_COLD);
diff --git a/drivers/nfc/s3fwrn5/firmware.c b/drivers/nfc/s3fwrn5/firmware.c
index 5d5ad8307211..eb5d7a5beac7 100644
--- a/drivers/nfc/s3fwrn5/firmware.c
+++ b/drivers/nfc/s3fwrn5/firmware.c
@@ -266,7 +266,7 @@ static int s3fwrn5_fw_complete_update_mode(struct s3fwrn5_fw_info *fw_info)
 }
 
 /*
- * Firmware header stucture:
+ * Firmware header structure:
  *
  * 0x00 - 0x0B : Date and time string (w/o NUL termination)
  * 0x10 - 0x13 : Firmware version
@@ -280,7 +280,7 @@ static int s3fwrn5_fw_complete_update_mode(struct s3fwrn5_fw_info *fw_info)
 
 #define S3FWRN5_FW_IMAGE_HEADER_SIZE 44
 
-static int s3fwrn5_fw_request_firmware(struct s3fwrn5_fw_info *fw_info)
+int s3fwrn5_fw_request_firmware(struct s3fwrn5_fw_info *fw_info)
 {
 	struct s3fwrn5_fw_image *fw = &fw_info->fw;
 	u32 sig_off;
@@ -293,8 +293,10 @@ static int s3fwrn5_fw_request_firmware(struct s3fwrn5_fw_info *fw_info)
 	if (ret < 0)
 		return ret;
 
-	if (fw->fw->size < S3FWRN5_FW_IMAGE_HEADER_SIZE)
+	if (fw->fw->size < S3FWRN5_FW_IMAGE_HEADER_SIZE) {
+		release_firmware(fw->fw);
 		return -EINVAL;
+	}
 
 	memcpy(fw->date, fw->fw->data + 0x00, 12);
 	fw->date[12] = '\0';
@@ -358,15 +360,6 @@ int s3fwrn5_fw_setup(struct s3fwrn5_fw_info *fw_info)
 	struct s3fwrn5_fw_cmd_get_bootinfo_rsp bootinfo;
 	int ret;
 
-	/* Get firmware data */
-
-	ret = s3fwrn5_fw_request_firmware(fw_info);
-	if (ret < 0) {
-		dev_err(&fw_info->ndev->nfc_dev->dev,
-			"Failed to get fw file, ret=%02x\n", ret);
-		return ret;
-	}
-
 	/* Get bootloader info */
 
 	ret = s3fwrn5_fw_get_bootinfo(fw_info, &bootinfo);
diff --git a/drivers/nfc/s3fwrn5/firmware.h b/drivers/nfc/s3fwrn5/firmware.h
index 3c83e6730d30..3a82ce5837fb 100644
--- a/drivers/nfc/s3fwrn5/firmware.h
+++ b/drivers/nfc/s3fwrn5/firmware.h
@@ -89,6 +89,7 @@ struct s3fwrn5_fw_info {
 	char parity;
 };
 
+int s3fwrn5_fw_request_firmware(struct s3fwrn5_fw_info *fw_info);
 void s3fwrn5_fw_init(struct s3fwrn5_fw_info *fw_info, const char *fw_name);
 int s3fwrn5_fw_setup(struct s3fwrn5_fw_info *fw_info);
 bool s3fwrn5_fw_check_version(const struct s3fwrn5_fw_info *fw_info, u32 version);
diff --git a/drivers/nfc/s3fwrn5/i2c.c b/drivers/nfc/s3fwrn5/i2c.c
index d0a3bd9ff3c3..897394167522 100644
--- a/drivers/nfc/s3fwrn5/i2c.c
+++ b/drivers/nfc/s3fwrn5/i2c.c
@@ -15,76 +15,30 @@
 
 #include <net/nfc/nfc.h>
 
-#include "s3fwrn5.h"
+#include "phy_common.h"
 
 #define S3FWRN5_I2C_DRIVER_NAME "s3fwrn5_i2c"
 
-#define S3FWRN5_I2C_MAX_PAYLOAD 32
-#define S3FWRN5_EN_WAIT_TIME 150
-
 struct s3fwrn5_i2c_phy {
+	struct phy_common common;
 	struct i2c_client *i2c_dev;
-	struct nci_dev *ndev;
-
-	int gpio_en;
-	int gpio_fw_wake;
-
-	struct mutex mutex;
 
-	enum s3fwrn5_mode mode;
 	unsigned int irq_skip:1;
 };
 
-static void s3fwrn5_i2c_set_wake(void *phy_id, bool wake)
-{
-	struct s3fwrn5_i2c_phy *phy = phy_id;
-
-	mutex_lock(&phy->mutex);
-	gpio_set_value(phy->gpio_fw_wake, wake);
-	msleep(S3FWRN5_EN_WAIT_TIME/2);
-	mutex_unlock(&phy->mutex);
-}
-
 static void s3fwrn5_i2c_set_mode(void *phy_id, enum s3fwrn5_mode mode)
 {
 	struct s3fwrn5_i2c_phy *phy = phy_id;
 
-	mutex_lock(&phy->mutex);
+	mutex_lock(&phy->common.mutex);
 
-	if (phy->mode == mode)
+	if (s3fwrn5_phy_power_ctrl(&phy->common, mode) == false)
 		goto out;
 
-	phy->mode = mode;
-
-	gpio_set_value(phy->gpio_en, 1);
-	gpio_set_value(phy->gpio_fw_wake, 0);
-	if (mode == S3FWRN5_MODE_FW)
-		gpio_set_value(phy->gpio_fw_wake, 1);
-
-	if (mode != S3FWRN5_MODE_COLD) {
-		msleep(S3FWRN5_EN_WAIT_TIME);
-		gpio_set_value(phy->gpio_en, 0);
-		msleep(S3FWRN5_EN_WAIT_TIME/2);
-	}
-
 	phy->irq_skip = true;
 
 out:
-	mutex_unlock(&phy->mutex);
-}
-
-static enum s3fwrn5_mode s3fwrn5_i2c_get_mode(void *phy_id)
-{
-	struct s3fwrn5_i2c_phy *phy = phy_id;
-	enum s3fwrn5_mode mode;
-
-	mutex_lock(&phy->mutex);
-
-	mode = phy->mode;
-
-	mutex_unlock(&phy->mutex);
-
-	return mode;
+	mutex_unlock(&phy->common.mutex);
 }
 
 static int s3fwrn5_i2c_write(void *phy_id, struct sk_buff *skb)
@@ -92,7 +46,7 @@ static int s3fwrn5_i2c_write(void *phy_id, struct sk_buff *skb)
 	struct s3fwrn5_i2c_phy *phy = phy_id;
 	int ret;
 
-	mutex_lock(&phy->mutex);
+	mutex_lock(&phy->common.mutex);
 
 	phy->irq_skip = false;
 
@@ -103,7 +57,7 @@ static int s3fwrn5_i2c_write(void *phy_id, struct sk_buff *skb)
 		ret  = i2c_master_send(phy->i2c_dev, skb->data, skb->len);
 	}
 
-	mutex_unlock(&phy->mutex);
+	mutex_unlock(&phy->common.mutex);
 
 	if (ret < 0)
 		return ret;
@@ -115,9 +69,9 @@ static int s3fwrn5_i2c_write(void *phy_id, struct sk_buff *skb)
 }
 
 static const struct s3fwrn5_phy_ops i2c_phy_ops = {
-	.set_wake = s3fwrn5_i2c_set_wake,
+	.set_wake = s3fwrn5_phy_set_wake,
 	.set_mode = s3fwrn5_i2c_set_mode,
-	.get_mode = s3fwrn5_i2c_get_mode,
+	.get_mode = s3fwrn5_phy_get_mode,
 	.write = s3fwrn5_i2c_write,
 };
 
@@ -129,7 +83,7 @@ static int s3fwrn5_i2c_read(struct s3fwrn5_i2c_phy *phy)
 	char hdr[4];
 	int ret;
 
-	hdr_size = (phy->mode == S3FWRN5_MODE_NCI) ?
+	hdr_size = (phy->common.mode == S3FWRN5_MODE_NCI) ?
 		NCI_CTRL_HDR_SIZE : S3FWRN5_FW_HDR_SIZE;
 	ret = i2c_master_recv(phy->i2c_dev, hdr, hdr_size);
 	if (ret < 0)
@@ -138,7 +92,7 @@ static int s3fwrn5_i2c_read(struct s3fwrn5_i2c_phy *phy)
 	if (ret < hdr_size)
 		return -EBADMSG;
 
-	data_len = (phy->mode == S3FWRN5_MODE_NCI) ?
+	data_len = (phy->common.mode == S3FWRN5_MODE_NCI) ?
 		((struct nci_ctrl_hdr *)hdr)->plen :
 		((struct s3fwrn5_fw_header *)hdr)->len;
 
@@ -158,24 +112,24 @@ static int s3fwrn5_i2c_read(struct s3fwrn5_i2c_phy *phy)
 	}
 
 out:
-	return s3fwrn5_recv_frame(phy->ndev, skb, phy->mode);
+	return s3fwrn5_recv_frame(phy->common.ndev, skb, phy->common.mode);
 }
 
 static irqreturn_t s3fwrn5_i2c_irq_thread_fn(int irq, void *phy_id)
 {
 	struct s3fwrn5_i2c_phy *phy = phy_id;
 
-	if (!phy || !phy->ndev) {
+	if (!phy || !phy->common.ndev) {
 		WARN_ON_ONCE(1);
 		return IRQ_NONE;
 	}
 
-	mutex_lock(&phy->mutex);
+	mutex_lock(&phy->common.mutex);
 
 	if (phy->irq_skip)
 		goto out;
 
-	switch (phy->mode) {
+	switch (phy->common.mode) {
 	case S3FWRN5_MODE_NCI:
 	case S3FWRN5_MODE_FW:
 		s3fwrn5_i2c_read(phy);
@@ -185,7 +139,7 @@ static irqreturn_t s3fwrn5_i2c_irq_thread_fn(int irq, void *phy_id)
 	}
 
 out:
-	mutex_unlock(&phy->mutex);
+	mutex_unlock(&phy->common.mutex);
 
 	return IRQ_HANDLED;
 }
@@ -198,19 +152,23 @@ static int s3fwrn5_i2c_parse_dt(struct i2c_client *client)
 	if (!np)
 		return -ENODEV;
 
-	phy->gpio_en = of_get_named_gpio(np, "en-gpios", 0);
-	if (!gpio_is_valid(phy->gpio_en)) {
+	phy->common.gpio_en = of_get_named_gpio(np, "en-gpios", 0);
+	if (!gpio_is_valid(phy->common.gpio_en)) {
 		/* Support also deprecated property */
-		phy->gpio_en = of_get_named_gpio(np, "s3fwrn5,en-gpios", 0);
-		if (!gpio_is_valid(phy->gpio_en))
+		phy->common.gpio_en = of_get_named_gpio(np,
+							"s3fwrn5,en-gpios",
+							0);
+		if (!gpio_is_valid(phy->common.gpio_en))
 			return -ENODEV;
 	}
 
-	phy->gpio_fw_wake = of_get_named_gpio(np, "wake-gpios", 0);
-	if (!gpio_is_valid(phy->gpio_fw_wake)) {
+	phy->common.gpio_fw_wake = of_get_named_gpio(np, "wake-gpios", 0);
+	if (!gpio_is_valid(phy->common.gpio_fw_wake)) {
 		/* Support also deprecated property */
-		phy->gpio_fw_wake = of_get_named_gpio(np, "s3fwrn5,fw-gpios", 0);
-		if (!gpio_is_valid(phy->gpio_fw_wake))
+		phy->common.gpio_fw_wake = of_get_named_gpio(np,
+							     "s3fwrn5,fw-gpios",
+							     0);
+		if (!gpio_is_valid(phy->common.gpio_fw_wake))
 			return -ENODEV;
 	}
 
@@ -227,8 +185,8 @@ static int s3fwrn5_i2c_probe(struct i2c_client *client,
 	if (!phy)
 		return -ENOMEM;
 
-	mutex_init(&phy->mutex);
-	phy->mode = S3FWRN5_MODE_COLD;
+	mutex_init(&phy->common.mutex);
+	phy->common.mode = S3FWRN5_MODE_COLD;
 	phy->irq_skip = true;
 
 	phy->i2c_dev = client;
@@ -238,26 +196,27 @@ static int s3fwrn5_i2c_probe(struct i2c_client *client,
 	if (ret < 0)
 		return ret;
 
-	ret = devm_gpio_request_one(&phy->i2c_dev->dev, phy->gpio_en,
-		GPIOF_OUT_INIT_HIGH, "s3fwrn5_en");
+	ret = devm_gpio_request_one(&phy->i2c_dev->dev, phy->common.gpio_en,
+				    GPIOF_OUT_INIT_HIGH, "s3fwrn5_en");
 	if (ret < 0)
 		return ret;
 
-	ret = devm_gpio_request_one(&phy->i2c_dev->dev, phy->gpio_fw_wake,
-		GPIOF_OUT_INIT_LOW, "s3fwrn5_fw_wake");
+	ret = devm_gpio_request_one(&phy->i2c_dev->dev,
+				    phy->common.gpio_fw_wake,
+				    GPIOF_OUT_INIT_LOW, "s3fwrn5_fw_wake");
 	if (ret < 0)
 		return ret;
 
-	ret = s3fwrn5_probe(&phy->ndev, phy, &phy->i2c_dev->dev, &i2c_phy_ops,
-		S3FWRN5_I2C_MAX_PAYLOAD);
+	ret = s3fwrn5_probe(&phy->common.ndev, phy, &phy->i2c_dev->dev,
+			    &i2c_phy_ops);
 	if (ret < 0)
 		return ret;
 
 	ret = devm_request_threaded_irq(&client->dev, phy->i2c_dev->irq, NULL,
-		s3fwrn5_i2c_irq_thread_fn, IRQF_TRIGGER_HIGH | IRQF_ONESHOT,
+		s3fwrn5_i2c_irq_thread_fn, IRQF_ONESHOT,
 		S3FWRN5_I2C_DRIVER_NAME, phy);
 	if (ret)
-		s3fwrn5_remove(phy->ndev);
+		s3fwrn5_remove(phy->common.ndev);
 
 	return ret;
 }
@@ -266,7 +225,7 @@ static int s3fwrn5_i2c_remove(struct i2c_client *client)
 {
 	struct s3fwrn5_i2c_phy *phy = i2c_get_clientdata(client);
 
-	s3fwrn5_remove(phy->ndev);
+	s3fwrn5_remove(phy->common.ndev);
 
 	return 0;
 }
diff --git a/drivers/nfc/s3fwrn5/phy_common.c b/drivers/nfc/s3fwrn5/phy_common.c
new file mode 100644
index 000000000000..497b02b30ae7
--- /dev/null
+++ b/drivers/nfc/s3fwrn5/phy_common.c
@@ -0,0 +1,75 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Link Layer for Samsung S3FWRN5 NCI based Driver
+ *
+ * Copyright (C) 2015 Samsung Electrnoics
+ * Robert Baldyga <r.baldyga@samsung.com>
+ * Copyright (C) 2020 Samsung Electrnoics
+ * Bongsu Jeon <bongsu.jeon@samsung.com>
+ */
+
+#include <linux/gpio.h>
+#include <linux/delay.h>
+#include <linux/module.h>
+
+#include "phy_common.h"
+
+void s3fwrn5_phy_set_wake(void *phy_id, bool wake)
+{
+	struct phy_common *phy = phy_id;
+
+	mutex_lock(&phy->mutex);
+	gpio_set_value(phy->gpio_fw_wake, wake);
+	msleep(S3FWRN5_EN_WAIT_TIME);
+	mutex_unlock(&phy->mutex);
+}
+EXPORT_SYMBOL(s3fwrn5_phy_set_wake);
+
+bool s3fwrn5_phy_power_ctrl(struct phy_common *phy, enum s3fwrn5_mode mode)
+{
+	if (phy->mode == mode)
+		return false;
+
+	phy->mode = mode;
+
+	gpio_set_value(phy->gpio_en, 1);
+	gpio_set_value(phy->gpio_fw_wake, 0);
+	if (mode == S3FWRN5_MODE_FW)
+		gpio_set_value(phy->gpio_fw_wake, 1);
+
+	if (mode != S3FWRN5_MODE_COLD) {
+		msleep(S3FWRN5_EN_WAIT_TIME);
+		gpio_set_value(phy->gpio_en, 0);
+		msleep(S3FWRN5_EN_WAIT_TIME);
+	}
+
+	return true;
+}
+EXPORT_SYMBOL(s3fwrn5_phy_power_ctrl);
+
+void s3fwrn5_phy_set_mode(void *phy_id, enum s3fwrn5_mode mode)
+{
+	struct phy_common *phy = phy_id;
+
+	mutex_lock(&phy->mutex);
+
+	s3fwrn5_phy_power_ctrl(phy, mode);
+
+	mutex_unlock(&phy->mutex);
+}
+EXPORT_SYMBOL(s3fwrn5_phy_set_mode);
+
+enum s3fwrn5_mode s3fwrn5_phy_get_mode(void *phy_id)
+{
+	struct phy_common *phy = phy_id;
+	enum s3fwrn5_mode mode;
+
+	mutex_lock(&phy->mutex);
+
+	mode = phy->mode;
+
+	mutex_unlock(&phy->mutex);
+
+	return mode;
+}
+EXPORT_SYMBOL(s3fwrn5_phy_get_mode);
diff --git a/drivers/nfc/s3fwrn5/phy_common.h b/drivers/nfc/s3fwrn5/phy_common.h
new file mode 100644
index 000000000000..99749c9294d1
--- /dev/null
+++ b/drivers/nfc/s3fwrn5/phy_common.h
@@ -0,0 +1,37 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later
+ *
+ * Link Layer for Samsung S3FWRN5 NCI based Driver
+ *
+ * Copyright (C) 2015 Samsung Electrnoics
+ * Robert Baldyga <r.baldyga@samsung.com>
+ * Copyright (C) 2020 Samsung Electrnoics
+ * Bongsu Jeon <bongsu.jeon@samsung.com>
+ */
+
+#ifndef __NFC_S3FWRN5_PHY_COMMON_H
+#define __NFC_S3FWRN5_PHY_COMMON_H
+
+#include <linux/mutex.h>
+#include <net/nfc/nci_core.h>
+
+#include "s3fwrn5.h"
+
+#define S3FWRN5_EN_WAIT_TIME 20
+
+struct phy_common {
+	struct nci_dev *ndev;
+
+	int gpio_en;
+	int gpio_fw_wake;
+
+	struct mutex mutex;
+
+	enum s3fwrn5_mode mode;
+};
+
+void s3fwrn5_phy_set_wake(void *phy_id, bool wake);
+bool s3fwrn5_phy_power_ctrl(struct phy_common *phy, enum s3fwrn5_mode mode);
+void s3fwrn5_phy_set_mode(void *phy_id, enum s3fwrn5_mode mode);
+enum s3fwrn5_mode s3fwrn5_phy_get_mode(void *phy_id);
+
+#endif /* __NFC_S3FWRN5_PHY_COMMON_H */
diff --git a/drivers/nfc/s3fwrn5/s3fwrn5.h b/drivers/nfc/s3fwrn5/s3fwrn5.h
index ede68bb5eeae..bb8f936d13a2 100644
--- a/drivers/nfc/s3fwrn5/s3fwrn5.h
+++ b/drivers/nfc/s3fwrn5/s3fwrn5.h
@@ -34,7 +34,6 @@ struct s3fwrn5_info {
 	struct device *pdev;
 
 	const struct s3fwrn5_phy_ops *phy_ops;
-	unsigned int max_payload;
 
 	struct s3fwrn5_fw_info fw_info;
 
@@ -45,7 +44,7 @@ static inline int s3fwrn5_set_mode(struct s3fwrn5_info *info,
 	enum s3fwrn5_mode mode)
 {
 	if (!info->phy_ops->set_mode)
-		return -ENOTSUPP;
+		return -EOPNOTSUPP;
 
 	info->phy_ops->set_mode(info->phy_id, mode);
 
@@ -55,7 +54,7 @@ static inline int s3fwrn5_set_mode(struct s3fwrn5_info *info,
 static inline enum s3fwrn5_mode s3fwrn5_get_mode(struct s3fwrn5_info *info)
 {
 	if (!info->phy_ops->get_mode)
-		return -ENOTSUPP;
+		return -EOPNOTSUPP;
 
 	return info->phy_ops->get_mode(info->phy_id);
 }
@@ -63,7 +62,7 @@ static inline enum s3fwrn5_mode s3fwrn5_get_mode(struct s3fwrn5_info *info)
 static inline int s3fwrn5_set_wake(struct s3fwrn5_info *info, bool wake)
 {
 	if (!info->phy_ops->set_wake)
-		return -ENOTSUPP;
+		return -EOPNOTSUPP;
 
 	info->phy_ops->set_wake(info->phy_id, wake);
 
@@ -73,13 +72,13 @@ static inline int s3fwrn5_set_wake(struct s3fwrn5_info *info, bool wake)
 static inline int s3fwrn5_write(struct s3fwrn5_info *info, struct sk_buff *skb)
 {
 	if (!info->phy_ops->write)
-		return -ENOTSUPP;
+		return -EOPNOTSUPP;
 
 	return info->phy_ops->write(info->phy_id, skb);
 }
 
 int s3fwrn5_probe(struct nci_dev **ndev, void *phy_id, struct device *pdev,
-	const struct s3fwrn5_phy_ops *phy_ops, unsigned int max_payload);
+	const struct s3fwrn5_phy_ops *phy_ops);
 void s3fwrn5_remove(struct nci_dev *ndev);
 
 int s3fwrn5_recv_frame(struct nci_dev *ndev, struct sk_buff *skb,
diff --git a/drivers/nfc/s3fwrn5/uart.c b/drivers/nfc/s3fwrn5/uart.c
new file mode 100644
index 000000000000..82ea35d748a5
--- /dev/null
+++ b/drivers/nfc/s3fwrn5/uart.c
@@ -0,0 +1,196 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * UART Link Layer for S3FWRN82 NCI based Driver
+ *
+ * Copyright (C) 2015 Samsung Electronics
+ * Robert Baldyga <r.baldyga@samsung.com>
+ * Copyright (C) 2020 Samsung Electronics
+ * Bongsu Jeon <bongsu.jeon@samsung.com>
+ */
+
+#include <linux/device.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/nfc.h>
+#include <linux/netdevice.h>
+#include <linux/of.h>
+#include <linux/serdev.h>
+#include <linux/gpio.h>
+#include <linux/of_gpio.h>
+
+#include "phy_common.h"
+
+#define S3FWRN82_NCI_HEADER 3
+#define S3FWRN82_NCI_IDX 2
+#define NCI_SKB_BUFF_LEN 258
+
+struct s3fwrn82_uart_phy {
+	struct phy_common common;
+	struct serdev_device *ser_dev;
+	struct sk_buff *recv_skb;
+};
+
+static int s3fwrn82_uart_write(void *phy_id, struct sk_buff *out)
+{
+	struct s3fwrn82_uart_phy *phy = phy_id;
+	int err;
+
+	err = serdev_device_write(phy->ser_dev,
+				  out->data, out->len,
+				  MAX_SCHEDULE_TIMEOUT);
+	if (err < 0)
+		return err;
+
+	return 0;
+}
+
+static const struct s3fwrn5_phy_ops uart_phy_ops = {
+	.set_wake = s3fwrn5_phy_set_wake,
+	.set_mode = s3fwrn5_phy_set_mode,
+	.get_mode = s3fwrn5_phy_get_mode,
+	.write = s3fwrn82_uart_write,
+};
+
+static int s3fwrn82_uart_read(struct serdev_device *serdev,
+			      const unsigned char *data,
+			      size_t count)
+{
+	struct s3fwrn82_uart_phy *phy = serdev_device_get_drvdata(serdev);
+	size_t i;
+
+	for (i = 0; i < count; i++) {
+		skb_put_u8(phy->recv_skb, *data++);
+
+		if (phy->recv_skb->len < S3FWRN82_NCI_HEADER)
+			continue;
+
+		if ((phy->recv_skb->len - S3FWRN82_NCI_HEADER)
+				< phy->recv_skb->data[S3FWRN82_NCI_IDX])
+			continue;
+
+		s3fwrn5_recv_frame(phy->common.ndev, phy->recv_skb,
+				   phy->common.mode);
+		phy->recv_skb = alloc_skb(NCI_SKB_BUFF_LEN, GFP_KERNEL);
+		if (!phy->recv_skb)
+			return 0;
+	}
+
+	return i;
+}
+
+static const struct serdev_device_ops s3fwrn82_serdev_ops = {
+	.receive_buf = s3fwrn82_uart_read,
+	.write_wakeup = serdev_device_write_wakeup,
+};
+
+static const struct of_device_id s3fwrn82_uart_of_match[] = {
+	{ .compatible = "samsung,s3fwrn82", },
+	{},
+};
+MODULE_DEVICE_TABLE(of, s3fwrn82_uart_of_match);
+
+static int s3fwrn82_uart_parse_dt(struct serdev_device *serdev)
+{
+	struct s3fwrn82_uart_phy *phy = serdev_device_get_drvdata(serdev);
+	struct device_node *np = serdev->dev.of_node;
+
+	if (!np)
+		return -ENODEV;
+
+	phy->common.gpio_en = of_get_named_gpio(np, "en-gpios", 0);
+	if (!gpio_is_valid(phy->common.gpio_en))
+		return -ENODEV;
+
+	phy->common.gpio_fw_wake = of_get_named_gpio(np, "wake-gpios", 0);
+	if (!gpio_is_valid(phy->common.gpio_fw_wake))
+		return -ENODEV;
+
+	return 0;
+}
+
+static int s3fwrn82_uart_probe(struct serdev_device *serdev)
+{
+	struct s3fwrn82_uart_phy *phy;
+	int ret = -ENOMEM;
+
+	phy = devm_kzalloc(&serdev->dev, sizeof(*phy), GFP_KERNEL);
+	if (!phy)
+		goto err_exit;
+
+	phy->recv_skb = alloc_skb(NCI_SKB_BUFF_LEN, GFP_KERNEL);
+	if (!phy->recv_skb)
+		goto err_exit;
+
+	mutex_init(&phy->common.mutex);
+	phy->common.mode = S3FWRN5_MODE_COLD;
+
+	phy->ser_dev = serdev;
+	serdev_device_set_drvdata(serdev, phy);
+	serdev_device_set_client_ops(serdev, &s3fwrn82_serdev_ops);
+	ret = serdev_device_open(serdev);
+	if (ret) {
+		dev_err(&serdev->dev, "Unable to open device\n");
+		goto err_skb;
+	}
+
+	ret = serdev_device_set_baudrate(serdev, 115200);
+	if (ret != 115200) {
+		ret = -EINVAL;
+		goto err_serdev;
+	}
+
+	serdev_device_set_flow_control(serdev, false);
+
+	ret = s3fwrn82_uart_parse_dt(serdev);
+	if (ret < 0)
+		goto err_serdev;
+
+	ret = devm_gpio_request_one(&phy->ser_dev->dev, phy->common.gpio_en,
+				    GPIOF_OUT_INIT_HIGH, "s3fwrn82_en");
+	if (ret < 0)
+		goto err_serdev;
+
+	ret = devm_gpio_request_one(&phy->ser_dev->dev,
+				    phy->common.gpio_fw_wake,
+				    GPIOF_OUT_INIT_LOW, "s3fwrn82_fw_wake");
+	if (ret < 0)
+		goto err_serdev;
+
+	ret = s3fwrn5_probe(&phy->common.ndev, phy, &phy->ser_dev->dev,
+			    &uart_phy_ops);
+	if (ret < 0)
+		goto err_serdev;
+
+	return ret;
+
+err_serdev:
+	serdev_device_close(serdev);
+err_skb:
+	kfree_skb(phy->recv_skb);
+err_exit:
+	return ret;
+}
+
+static void s3fwrn82_uart_remove(struct serdev_device *serdev)
+{
+	struct s3fwrn82_uart_phy *phy = serdev_device_get_drvdata(serdev);
+
+	s3fwrn5_remove(phy->common.ndev);
+	serdev_device_close(serdev);
+	kfree_skb(phy->recv_skb);
+}
+
+static struct serdev_device_driver s3fwrn82_uart_driver = {
+	.probe = s3fwrn82_uart_probe,
+	.remove = s3fwrn82_uart_remove,
+	.driver = {
+		.name = "s3fwrn82_uart",
+		.of_match_table = s3fwrn82_uart_of_match,
+	},
+};
+
+module_serdev_device_driver(s3fwrn82_uart_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("UART driver for Samsung NFC");
+MODULE_AUTHOR("Bongsu Jeon <bongsu.jeon@samsung.com>");