diff options
| author | Yanir Lubetkin <yanirx.lubetkin@intel.com> | 2015-06-10 01:15:55 +0300 |
|---|---|---|
| committer | Jeff Kirsher <jeffrey.t.kirsher@intel.com> | 2015-06-26 02:42:24 -0700 |
| commit | 6607c99e7034e7565a1559a24dd35083d6719788 (patch) | |
| tree | 09109e7e1ad07015630cad19b3b0cf6d09deaf8a /drivers/net | |
| parent | beee8072c39cee74d4ff6e3b4ca8942f9966ed2e (diff) | |
e1000e: i219 - fix to enable both ULP and EEE in Sx state
In i219, there is a hardware bug that prevented ULP entry.
A side effect of the original software fix for this was that EEE in
Sx couldn't be enabled.
This patch implements a modified flow that allows both ULP and EEE in Sx.
Signed-off-by: Yanir Lubetkin <yanirx.lubetkin@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Diffstat (limited to 'drivers/net')
| -rw-r--r-- | drivers/net/ethernet/intel/e1000e/ich8lan.c | 45 |
1 files changed, 32 insertions, 13 deletions
diff --git a/drivers/net/ethernet/intel/e1000e/ich8lan.c b/drivers/net/ethernet/intel/e1000e/ich8lan.c index c742a4f5dc83..c5bb1dd8a18e 100644 --- a/drivers/net/ethernet/intel/e1000e/ich8lan.c +++ b/drivers/net/ethernet/intel/e1000e/ich8lan.c @@ -1089,6 +1089,7 @@ s32 e1000_enable_ulp_lpt_lp(struct e1000_hw *hw, bool to_sx) u32 mac_reg; s32 ret_val = 0; u16 phy_reg; + u16 oem_reg = 0; if ((hw->mac.type < e1000_pch_lpt) || (hw->adapter->pdev->device == E1000_DEV_ID_PCH_LPT_I217_LM) || @@ -1130,33 +1131,37 @@ s32 e1000_enable_ulp_lpt_lp(struct e1000_hw *hw, bool to_sx) if (ret_val) goto out; + /* Force SMBus mode in PHY */ + ret_val = e1000_read_phy_reg_hv_locked(hw, CV_SMB_CTRL, &phy_reg); + if (ret_val) + goto release; + phy_reg |= CV_SMB_CTRL_FORCE_SMBUS; + e1000_write_phy_reg_hv_locked(hw, CV_SMB_CTRL, phy_reg); + + /* Force SMBus mode in MAC */ + mac_reg = er32(CTRL_EXT); + mac_reg |= E1000_CTRL_EXT_FORCE_SMBUS; + ew32(CTRL_EXT, mac_reg); + /* Si workaround for ULP entry flow on i127/rev6 h/w. Enable * LPLU and disable Gig speed when entering ULP */ if ((hw->phy.type == e1000_phy_i217) && (hw->phy.revision == 6)) { ret_val = e1000_read_phy_reg_hv_locked(hw, HV_OEM_BITS, - &phy_reg); + &oem_reg); if (ret_val) goto release; + + phy_reg = oem_reg; phy_reg |= HV_OEM_BITS_LPLU | HV_OEM_BITS_GBE_DIS; + ret_val = e1000_write_phy_reg_hv_locked(hw, HV_OEM_BITS, phy_reg); + if (ret_val) goto release; } - /* Force SMBus mode in PHY */ - ret_val = e1000_read_phy_reg_hv_locked(hw, CV_SMB_CTRL, &phy_reg); - if (ret_val) - goto release; - phy_reg |= CV_SMB_CTRL_FORCE_SMBUS; - e1000_write_phy_reg_hv_locked(hw, CV_SMB_CTRL, phy_reg); - - /* Force SMBus mode in MAC */ - mac_reg = er32(CTRL_EXT); - mac_reg |= E1000_CTRL_EXT_FORCE_SMBUS; - ew32(CTRL_EXT, mac_reg); - /* Set Inband ULP Exit, Reset to SMBus mode and * Disable SMBus Release on PERST# in PHY */ @@ -1168,10 +1173,15 @@ s32 e1000_enable_ulp_lpt_lp(struct e1000_hw *hw, bool to_sx) if (to_sx) { if (er32(WUFC) & E1000_WUFC_LNKC) phy_reg |= I218_ULP_CONFIG1_WOL_HOST; + else + phy_reg &= ~I218_ULP_CONFIG1_WOL_HOST; phy_reg |= I218_ULP_CONFIG1_STICKY_ULP; + phy_reg &= ~I218_ULP_CONFIG1_INBAND_EXIT; } else { phy_reg |= I218_ULP_CONFIG1_INBAND_EXIT; + phy_reg &= ~I218_ULP_CONFIG1_STICKY_ULP; + phy_reg &= ~I218_ULP_CONFIG1_WOL_HOST; } e1000_write_phy_reg_hv_locked(hw, I218_ULP_CONFIG1, phy_reg); @@ -1183,6 +1193,15 @@ s32 e1000_enable_ulp_lpt_lp(struct e1000_hw *hw, bool to_sx) /* Commit ULP changes in PHY by starting auto ULP configuration */ phy_reg |= I218_ULP_CONFIG1_START; e1000_write_phy_reg_hv_locked(hw, I218_ULP_CONFIG1, phy_reg); + + if ((hw->phy.type == e1000_phy_i217) && (hw->phy.revision == 6) && + to_sx && (er32(STATUS) & E1000_STATUS_LU)) { + ret_val = e1000_write_phy_reg_hv_locked(hw, HV_OEM_BITS, + oem_reg); + if (ret_val) + goto release; + } + release: hw->phy.ops.release(hw); out: |